Search Results

Search found 25518 results on 1021 pages for 'iterative development'.

Page 915/1021 | < Previous Page | 911 912 913 914 915 916 917 918 919 920 921 922  | Next Page >

• Error 2013: Lost connection to MySQL server during query when executing CHECK TABLE FOR UPGRADE

  - by Dean Richardson

  I just upgraded Ubuntu from 11.10 to 12.04. My rails app now returns the (passenger) error "Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) (Mysql2::Error)". I get a similar error when I try to access mysql at the command line on my Ubuntu server using mysql -u root -p. I have mysql-server 5.5 installed. I've checked and mysql is not running. When I try to restart it, it fails. Here are some key lines from the tail of /var/log/syslog after an attempted restart: dean@dgwjasonfried:/etc/mysql$ tail -f /var/log/syslog Mar 7 08:55:27 dgwjasonfried /etc/mysql/debian-start[5107]: Looking for 'mysqlcheck' as: /usr/bin/mysqlcheck Mar 7 08:55:27 dgwjasonfried /etc/mysql/debian-start[5107]: Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' '--host=localhost' '--socket=/var/run/mysqld/mysqld.sock' '--host=localhost' '--socket=/var/run/mysqld/mysqld.sock' Mar 7 08:55:27 dgwjasonfried /etc/mysql/debian-start[5107]: Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' '--host=localhost' '--socket=/var/run/mysqld/mysqld.sock' '--host=localhost' '--socket=/var/run/mysqld/mysqld.sock' Mar 7 08:55:27 dgwjasonfried /etc/mysql/debian-start[5107]: /usr/bin/mysqlcheck: Got error: 2013: Lost connection to MySQL server during query when executing 'CHECK TABLE ... FOR UPGRADE' Mar 7 08:55:27 dgwjasonfried /etc/mysql/debian-start[5107]: FATAL ERROR: Upgrade failed Mar 7 08:55:27 dgwjasonfried /etc/mysql/debian-start[5107]: molex_app_development.assets OK Mar 7 08:55:27 dgwjasonfried /etc/mysql/debian-start[5107]: molex_app_development.ecd_types OK Mar 7 08:55:27 dgwjasonfried /etc/mysql/debian-start[5124]: Checking for insecure root accounts. Mar 7 08:55:27 dgwjasonfried kernel: [ 7551.769657] init: mysql main process (5064) terminated with status 1 Mar 7 08:55:27 dgwjasonfried kernel: [ 7551.769697] init: mysql respawning too fast, stopped Here is most of /etc/mysql/my.cnf: Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock Here is entries for some specific programs The following values assume you have at least 32M ram This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] Basic Settings user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp lc-messages-dir = /usr/share/mysql skip-external-locking Instead of skip-networking the default is now to listen only on localhost which is more compatible and is not less secure. bind-address = 127.0.0.1 And here are permissions for var/run/mysqld/mysqld.sock: srwxrwxrwx 1 mysql mysql 0 Mar 7 09:18 mysqld.sock I'd be grateful for any suggestions the community might have. I reviewed the related questions here and attempted some of the fixes offered but to no avail. Thanks! Dean Richardson Update: Thanks to quanta's suggestion, I looked at the /var/log/mysql/error.log file. I found error messages relating to pointers, fatal signals, and more stuff that I really couldn't make much sense of. I also found mysql man page references, however. One suggested that I try starting mysqld with the --innodb_force_recovery=# option, then attempt to dump (or drop) the offending/corrupted database or table. I worked through the escalating option levels one-by-one (innodb_force_recovery=1, innodb_force_recovery=2, etc.) This allowed me to successfully run mysql -u root -p from the command line and execute several commands. I was able to run queries on my production database, but any attempt to query, dump, or even drop my development database raised an error and led to me losing the connection to mysql. So I've made progress, but until I'm somehow able to drop or repair my development db I'm still unable to get my app to load. Any further advice or suggestions? Thanks! Dean Update: Right after running sudo mysqld --innodb_force_recover=1 from the command line, the error.log contains this: Right after retrying sudo mysqld --innodb_force_recover=1, The error.log file shows this: 130308 4:55:39 [Note] Plugin 'FEDERATED' is disabled. 130308 4:55:39 InnoDB: The InnoDB memory heap is disabled 130308 4:55:39 InnoDB: Mutexes and rw_locks use GCC atomic builtins 130308 4:55:39 InnoDB: Compressed tables use zlib 1.2.3.4 130308 4:55:39 InnoDB: Initializing buffer pool, size = 128.0M 130308 4:55:39 InnoDB: Completed initialization of buffer pool 130308 4:55:39 InnoDB: highest supported file format is Barracuda. InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 130308 4:55:39 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 130308 4:55:40 InnoDB: Waiting for the background threads to start 130308 4:55:41 InnoDB: 1.1.8 started; log sequence number 10259220 130308 4:55:41 InnoDB: !!! innodb_force_recovery is set to 1 !!! 130308 4:55:41 [Note] Server hostname (bind-address): '127.0.0.1'; port: 3306 130308 4:55:41 [Note] - '127.0.0.1' resolves to '127.0.0.1'; 130308 4:55:41 [Note] Server socket created on IP: '127.0.0.1'. 130308 4:55:41 [Note] Event Scheduler: Loaded 0 events 130308 4:55:41 [Note] mysqld: ready for connections. Version: '5.5.29-0ubuntu0.12.04.2' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) Then after mysql -u root -p and mysql> drop database molex_app_development; ERROR 2013 (HY000): Lost connection to MySQL server during query mysql> the error.log contains: dean@dgwjasonfried:/var/log/mysql$ tail -f error.log /lib/x86_64-linux-gnu/libc.so.6(clone+0x6d)[0x7f6a3ff9ecbd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort. Query (7f6a1c004bd8): is an invalid pointer Connection ID (thread ID): 1 Status: NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 130308 4:55:39 [Note] Plugin 'FEDERATED' is disabled. 130308 4:55:39 InnoDB: The InnoDB memory heap is disabled 130308 4:55:39 InnoDB: Mutexes and rw_locks use GCC atomic builtins 130308 4:55:39 InnoDB: Compressed tables use zlib 1.2.3.4 130308 4:55:39 InnoDB: Initializing buffer pool, size = 128.0M 130308 4:55:39 InnoDB: Completed initialization of buffer pool 130308 4:55:39 InnoDB: highest supported file format is Barracuda. InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 130308 4:55:39 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 130308 4:55:40 InnoDB: Waiting for the background threads to start 130308 4:55:41 InnoDB: 1.1.8 started; log sequence number 10259220 130308 4:55:41 InnoDB: !!! innodb_force_recovery is set to 1 !!! 130308 4:55:41 [Note] Server hostname (bind-address): '127.0.0.1'; port: 3306 130308 4:55:41 [Note] - '127.0.0.1' resolves to '127.0.0.1'; 130308 4:55:41 [Note] Server socket created on IP: '127.0.0.1'. 130308 4:55:41 [Note] Event Scheduler: Loaded 0 events 130308 4:55:41 [Note] mysqld: ready for connections. Version: '5.5.29-0ubuntu0.12.04.2' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 130308 4:58:23 [ERROR] Incorrect definition of table mysql.proc: expected column 'comment' at position 15 to have type text, found type char(64). 130308 4:58:23 InnoDB: Assertion failure in thread 140168992810752 in file fsp0fsp.c line 3639 InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: about forcing recovery. 10:58:23 UTC - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=151 thread_count=1 connection_count=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 346681 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. Thread pointer: 0x7f7ba4f6c2f0 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 7f7ba3065e60 thread_stack 0x30000 mysqld(my_print_stacktrace+0x29)[0x7f7ba3609039] mysqld(handle_fatal_signal+0x483)[0x7f7ba34cf9c3] /lib/x86_64-linux-gnu/libpthread.so.0(+0xfcb0)[0x7f7ba2220cb0] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x35)[0x7f7ba188c425] /lib/x86_64-linux-gnu/libc.so.6(abort+0x17b)[0x7f7ba188fb8b] mysqld(+0x65e0fc)[0x7f7ba37160fc] mysqld(+0x602be6)[0x7f7ba36babe6] mysqld(+0x635006)[0x7f7ba36ed006] mysqld(+0x5d7072)[0x7f7ba368f072] mysqld(+0x5d7b9c)[0x7f7ba368fb9c] mysqld(+0x6a3348)[0x7f7ba375b348] mysqld(+0x6a3887)[0x7f7ba375b887] mysqld(+0x5c6a86)[0x7f7ba367ea86] mysqld(+0x5ae3a7)[0x7f7ba36663a7] mysqld(_Z15ha_delete_tableP3THDP10handlertonPKcS4_S4_b+0x16d)[0x7f7ba34d3ffd] mysqld(_Z23mysql_rm_table_no_locksP3THDP10TABLE_LISTbbbb+0x568)[0x7f7ba3417f78] mysqld(_Z11mysql_rm_dbP3THDPcbb+0x8aa)[0x7f7ba339780a] mysqld(_Z21mysql_execute_commandP3THD+0x394c)[0x7f7ba33b886c] mysqld(_Z11mysql_parseP3THDPcjP12Parser_state+0x10f)[0x7f7ba33bb28f] mysqld(_Z16dispatch_command19enum_server_commandP3THDPcj+0x1380)[0x7f7ba33bc6e0] mysqld(_Z24do_handle_one_connectionP3THD+0x1bd)[0x7f7ba346119d] mysqld(handle_one_connection+0x50)[0x7f7ba3461200] /lib/x86_64-linux-gnu/libpthread.so.0(+0x7e9a)[0x7f7ba2218e9a] /lib/x86_64-linux-gnu/libc.so.6(clone+0x6d)[0x7f7ba1949cbd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort. Query (7f7b7c004b60): is an invalid pointer Connection ID (thread ID): 1 Status: NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. --Dean

  Read the article

• Jenkins: Use it with SSL / https

  - by Tim

  I have a Fedora server running Jenkins which I install via yum. Everything is okay, I can access it with http://ci.mydomain.com. But now, I want to access it with https://ci.mydomain.com, so the login with username and password is encrypted. How can I do this? Best Regards Tim Update My /etc/sysconfig/jenkins file. Starting Jenkins works, but I can not access Jenkins with the webbrowser with https://ci.mydomain.com or http://ci.mydomain.com:443, ... ## Path: Development/Jenkins ## Description: Configuration for the Jenkins continuous build server ## Type: string ## Default: "/var/lib/jenkins" ## ServiceRestart: jenkins # # Directory where Jenkins store its configuration and working # files (checkouts, build reports, artifacts, ...). # JENKINS_HOME="/var/lib/jenkins" ## Type: string ## Default: "" ## ServiceRestart: jenkins # # Java executable to run Jenkins # When left empty, we'll try to find the suitable Java. # JENKINS_JAVA_CMD="" ## Type: string ## Default: "jenkins" ## ServiceRestart: jenkins # # Unix user account that runs the Jenkins daemon # Be careful when you change this, as you need to update # permissions of $JENKINS_HOME and /var/log/jenkins. # JENKINS_USER="jenkins" ## Type: string ## Default: "-Djava.awt.headless=true" ## ServiceRestart: jenkins # # Options to pass to java when running Jenkins. # JENKINS_JAVA_OPTIONS="-Djava.awt.headless=true" ## Type: integer(0:65535) ## Default: 8080 ## ServiceRestart: jenkins # # Port Jenkins is listening on. # JENKINS_PORT="8080" ## Type: integer(1:9) ## Default: 5 ## ServiceRestart: jenkins # # Debug level for logs -- the higher the value, the more verbose. # 5 is INFO. # JENKINS_DEBUG_LEVEL="5" ## Type: yesno ## Default: no ## ServiceRestart: jenkins # # Whether to enable access logging or not. # JENKINS_ENABLE_ACCESS_LOG="no" ## Type: integer ## Default: 100 ## ServiceRestart: jenkins # # Maximum number of HTTP worker threads. # JENKINS_HANDLER_MAX="100" ## Type: integer ## Default: 20 ## ServiceRestart: jenkins # # Maximum number of idle HTTP worker threads. # JENKINS_HANDLER_IDLE="20" ## Type: string ## Default: "" ## ServiceRestart: jenkins # # Pass arbitrary arguments to Jenkins. # Full option list: java -jar jenkins.war --help # JENKINS_ARGS="--httpsPort=443 --httpsKeyStore=/root/.keystore --httpsKeyStorePassword=MYPASSWORD"

  Read the article

• Vagrant synced folders aren't case sensitive

  - by lvmisooners

  For our web stack, we are moving from a Windows Server to CentOS. To facilitate development, we're utilizing Vagrant to run CentOS VMs locally. We're using Vagrant's Synced Folders feature to allow devs to use their favorite IDEs on their host machine, but we're finding that one key feature is missing from this setup: file system case sensitivity. The synced folder inside the VM apparently takes on the properties of the host's file system, so if I'm developing from a Windows machine, or even OSX, the file system isn't case sensitive. This is a big issue, as our production servers will be pure CentOS, and its file system will be case sensitive. Case sensitivity is one of the main reasons we wanted to have a local VM. We want to prevent "It works on my machine!" Some workarounds we've considered or tried: Use lsyncd to sync from the vagrant share to a location within the VM that is case sensitive updating files on the host doesn't seem to generate the events in the VM that lsync listens to Make a case-sensitive partition on the host (Doesn't work for Windows) Use samba this may be an option, but we haven't vetted it yet. Is there a better way? Note that we have developers using Windows, OS X, and Ubuntu, and the solution needs to work everywhere.

  Read the article

• What is there in Win 7 Pro (or Ultimate) that is not there in Home Premium? - Especially considering this situation..

  - by Senthil

  I want to know the REAL difference between Windows 7 Home Premium and Professional/Utimate. In India, the cost of different versions: Ultimate - 11,200 INR Professional - 10,700 INR Home Premium - 6,600 INR The absolute cost of the first two is so high to me that the difference (500 INR) doesn't matter. So to me there is really no choice between the first two - If I decide to buy the Professional version, I'd rather go for Ultimate itself. What I want to know is, whether Home Premium is enough for my needs. I tried searching for comparison but many look like just marketing junk from MS. They are short and vague. According to this page, the major differences between Pro and HomePremium are Run many Windows XP productivity programs in Windows XP Mode. Connect to company networks easily and more securely with Domain Join. You can do both in Pro but not in Home Premium. I intend to use my Windows 7 for a small business - just starting up. So I'll be dealing with the following: All kinds of development tools, servers Very important - I will run Virtual Machine Software (MS VPC or VMWare or Sun VirtualBox etc..) My system will be acting as the server for most purposes till I can afford dedicated servers. Connect the system to a variety of network devices (PCs, Printers, etc..) Run productivity, business and financial apps Any other small software startup business requirement that I haven't thought of yet. Professional (and Ultimate) is twice as expensive as Home Premium. So it'd be great if someone can point out the things you cannot do with Home Premium, when you use it like I explained above, so that I can make a decision about which one to buy. I need some real-life experiences so that I can make an informed decision - not a decision based on marketing junk.

  Read the article

• OpenSSL support for Ruby: "Cipher is not a module (TypeError)"

  - by smotchkkiss

  The Problem Our systems admin needed to upgrade the packages on our CentOS 5.4 dev server to match the packages on our production server. The upgrade affected ruby and/or openssl. We run a Ruby on Rails issue tracking system called Redmine that is deployed with Passenger on Apache. Everything worked before the server update, but when trying to access the ticket system now, I get the following error: Error message: Cipher is not a module Exception class: TypeError Application root: /home/dev/rails/redmine-0.8.7 I've been trying so hard to fix this problem but I can't seem to beat it. I have tried following this guide: http://iamclovin.posterous.com/how-to-solve-the-cipher-is-not-a-module-error When I try require 'openssl' in IRB, I do see a true return value. However, I'm still seeing the Cipher.rb is not a module TypeError when accessing the ticket system. Possibly (probably) related: I've tried updating Passenger, but when I try passenger-install-apache2-module I see: Checking for required software... * GNU C++ compiler... found at /usr/bin/g++ * Ruby development headers... found * OpenSSL support for Ruby... /usr/lib/ruby/1.8/openssl/cipher.rb:22: Cipher is not a module (TypeError) Any help?

  Read the article

• how to get Geo::Coder::Many with cpan?

  - by mnemonic

  Ubuntu is installed for development of a Perl project. aptitude search Geo-Coder i libgeo-coder-googlev3-perl - Perl module providing access to Google Map Aptitude does not refer to Geo::Coder::Many cpan can not build it. sudo cpan Geo::Coder::Many Then: CPAN: Storable loaded ok (v2.27) Going to read '/home/jh/.cpan/Metadata' Database was generated on Wed, 16 Oct 2013 06:17:04 GMT Running install for module 'Geo::Coder::Many' Running make for K/KA/KAORU/Geo-Coder-Many-0.42.tar.gz CPAN: Digest::SHA loaded ok (v5.61) CPAN: Compress::Zlib loaded ok (v2.033) Checksum for /home/jh/.cpan/sources/authors/id/K/KA/KAORU/Geo-Coder-Many-0.42.tar.gz ok CPAN: File::Temp loaded ok (v0.22) CPAN: Parse::CPAN::Meta loaded ok (v1.4401) CPAN: CPAN::Meta loaded ok (v2.110440) CPAN: Module::CoreList loaded ok (v2.49_02) CPAN: Module::Build loaded ok (v0.38) CPAN.pm: Going to build K/KA/KAORU/Geo-Coder-Many-0.42.tar.gz Can't locate Geo/Coder/Many/Google.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.14.2 /usr/local/share/perl/5.14.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.14 /usr/share/perl/5.14 /usr/local/lib/site_perl .) at /usr/share/perl/5.14/Module/Load.pm line 27. Can't locate Geo/Coder/Many/Google in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.14.2 /usr/local/share/perl/5.14.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.14 /usr/share/perl/5.14 /usr/local/lib/site_perl .) at /usr/share/perl/5.14/Module/Load.pm line 27. BEGIN failed--compilation aborted at Build.PL line 54. Warning: No success on command[/usr/bin/perl Build.PL --installdirs site] CPAN: YAML loaded ok (v0.77) KAORU/Geo-Coder-Many-0.42.tar.gz /usr/bin/perl Build.PL --installdirs site -- NOT OK Running Build test Make had some problems, won't test Running Build install Make had some problems, won't install Could not read metadata file. Falling back to other methods to determine prerequisites Any suggestions how to resolve this issue?

  Read the article

• Apache ProxyPass with SSL

  - by BBonifield

  I have a QA setup that consists of multiple internal development servers and one world-accessible provisioning machine that is setup to proxy pass the web traffic. Everything works fine for non-SSL requests, but I'm having a hard time getting the SSL logic working as well. Here's a few example vhost blocks. <VirtualHost 192.168.168.101:443> ProxyPreserveHost On SSLProxyEngine On ProxyPass / https://192.168.168.111/ ServerName dev1.site.com </VirtualHost> <VirtualHost 192.168.168.101:80> ProxyPreserveHost On ProxyPass / http://192.168.168.111/ ServerName dev1.site.com </VirtualHost> <VirtualHost 192.168.168.101:443> ProxyPreserveHost On SSLProxyEngine On ProxyPass / https://192.168.168.111/ ServerName dev2.site.com </VirtualHost> <VirtualHost 192.168.168.101:80> ProxyPreserveHost On ProxyPass / http://192.168.168.111/ ServerName dev2.site.com </VirtualHost> I end up seeing the following error in the provisioner's error log. [Fri Jan 28 12:50:59 2011] [warn] [client 1.2.3.4] proxy: no HTTP 0.9 request (with no host line) on incoming request and preserve host set forcing hostname to be dev1.site.com for uri / As well as the following entry in the destination QA machine's access log. 192.168.168.101 - - [22/Feb/2011:08:34:56 -0600] "\x16\x03\x01 / HTTP/1.1" 301 326 "-" "-"

  Read the article

• Intel Core i7 QuadCore on HP Pavilion dv7 Overheating Issues

  - by kellax

  I bought a brand new HP notebook: HP Pavilion dv7-6b21em BeatsAudio edition. The notebook is about 2 months old and has pretty nasty overheating problem. I mainly use it for development however i do play some games. The disturbing thing is that the computer is loud on pretty simple tasks. Here are the specs: CPU: Intel Core i7-2670QM QuadCore ( 8 threads ) @ 2.20 GHz RAM: ( 8GB ) 2x 4GB @ 1066 HDD: 1TB 7200 GPU: ATI Radeon HD 6770M 1GB Dedicated DDR OS: Windows 7 64bit Enterprise I have an external monitor runing on VGA port an 22' Samsung SyncMaster S24B300 CPU Heat Statistics Platform: rPGA 988B (Socket G2) Frequency: cca. 3000 Mhz VID: 1.1809 - 1.2059 v Revision: D2 CPUID: 0x206A7 TDP: 45.0 Wats, Lithographu: 32 nm Heat: Tj. Max: 100*C, Power 4.5 - 5.9 Wats Core #0: 63*C Load on all is about 0 to 2% Core #1: 65*C Core #2: 66*C Core #3: 67*C I opened the notebook the fan is working fine there is no dust but still right now the fan is pretty loud even tho all i have open is FireFox. When i run a game the heat jumps to whopping 90-97*C. It has not shut down due to overheating yet but the loud fan is pretty annoying considering I'm not really doing anything stressfull. Is there anything i can do to fix this is it maybe a BIOS issue ? I have all drivers updated tho to the latest. I have very few background processes running consuming bare 2GB of RAM and about 2% of CPU. I had it serviced they said there is nothing wrong with it. But i feel that a Notebook that costs 1.2k Euros cant be like this.

  Read the article

• Is there a way to tell what the download speed is from a site/server

  - by Memor-X

  i'm looking into which ISP i should go with at the place i'm moving into, one ISP which i have been told good things about has data limits (which when breached will drop your speed to dial-up speed) but multiple memberships which, apart from the cheapest membership, have the same data limits (the cheapest has a 10GB data limit) in their fine print, they say that each different membership has different port speeds, one particular part jumps out at me These speeds are the NBN (National Broadband Network) port speed and not the actual Internet data speed which will vary based on numerous factors including destination you are reaching, your network equipment, network congestion etc. i plan to use the net to download DLC and patch updates for games (particular the insanely large update for the Wii U) and games from Steam (if i find any good one other than this one JRPG) and downloading development resources from free sites like Deposit Files and Mediafire since one membership with a 1000GB data limit is $145 with the port speed being 12Mbps/1Mbps (cheapest) while another with the same limit is $190 with the port speed of 100Mbps/40Mbps (expensive) i am wondering how i can tell what the speed coming from site is since i don't want to be wasting money on speed that makes no difference (unlike memory which i rather have to spare) NOTE: the speeds are for a fiber optic network which where my new place is can only connect via fixed wireless which i may not be able to get with this ISP but if i can get this network then good NOTE 2: most of the resources i get from Deposit Files are always about 200 MB or less, if a resource pack is greater then it's split into multiple archives (like .7z.part) while Mediafire i have to see one bigger than 150MB NOTE 3: one update patch for a PS3 game is close to 4 GB (Disgaea 4) which i need to get access to the DLC and on the weekend i downloaded 5 GB for the Final Fantasy XIV Open Beta for the PS3 which took almost 5 hours

  Read the article

• MSI Installer error 2203; how to force permissions on installer directory?

  - by goober

  [Cross-Posted on StackOverflow.com as well because the question relates to development. Feel free to let me know where it best belongs.] Hi all, I'll try to bullet-point to keep it short: Background / Issue Trying to install ASP.NET MVC 3 RC on my Windows 7 machine. Uninstalled other versions of MVC (2 and 3 Beta 1). Ran the installer -- got a generic error, 2203. Log files said that it was a permissions error on C:\Windows\Installer. Checked C:\Windows\Installer -- sure enough, it's marked as read-only. I un-checked "Read-Only" in the folder properties and applied. It appears to open the dialog and apply to all files. However, when clicking properties again, the read-only box is backed to checked. Checked the security tab of the folder -- both system and the Administrators group have full access. I checked ownership -- the Administrators group is listed as an owner. Verified that I'm in the system as an Administrator (in fact, the only account in the Administrators group besides Administrator). So, what gives? Thanks in advance for any help you can provide!

  Read the article

• How to install VMware tools for Ubuntu 11.04 hosted on VMware ESXi?

  - by Dmitri Toubelis

  I'm running Vmware ESX 4.1 and I have a development VM that I recently upgraded from Ubuntu 10.04 to 11.04. Then I tried to re-install VMware Tools and some of the modules gave me an error and would not compile. As a result I'm having problems with backing up this virtual machine now and I suspect VMware tools is the reason. I installed latest patches for VMware host, that included an update to VMware Tools (v8.3.7 build-381511) but I'm still getting the same error. The error I'm getting is like this: ... /tmp/vmware-root/modules/vmhgfs-only/super.c:73:4: error: unknown field \u2018clear_inode\u2019 specified in initializer make[2]: *** [/tmp/vmware-root/modules/vmhgfs-only/super.o] Error 1 make[1]: *** [_module_/tmp/vmware-root/modules/vmhgfs-only] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-generic' make: *** [vmhgfs.ko] Error 2 make: Leaving directory `/tmp/vmware-root/modules/vmhgfs-only' and also this: /tmp/vmware-root/modules/vmci-only/vmci_drv.c:91:4: error: unknown field \u2018ioctl\u2019 specified in initializer /tmp/vmware-root/modules/vmci-only/vmci_drv.c:91:4: warning: initialization from incompatible pointer type /tmp/vmware-root/modules/vmci-only/vmci_drv.c: In function \u2018vmci_init\u2019: /tmp/vmware-root/modules/vmci-only/vmci_drv.c:151:4: error: implicit declaration of function \u2018init_MUTEX\u2019 make[2]: *** [/tmp/vmware-root/modules/vmci-only/vmci_drv.o] Error 1 make[1]: *** [_module_/tmp/vmware-root/modules/vmci-only] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-generic' make: *** [vmci.ko] Error 2 make: Leaving directory `/tmp/vmware-root/modules/vmci-only' Any ideas?

  Read the article

• getting "No LoginModules configured" for JAAS login under WebSphere security domain

  - by user1739040

  I have a JAX-RPC web service running on WebSphere V7. It requires a UserNameToken for security. I have a custom login module (MyLoginModule) which extracts the username and password, and that module is defined as a JAAS application login in the websphere admin console. Using IBM RAD 8.0, I have bound the token consumer to the login module using the JAAS config name of the module. This all works fine and happy on my development server. Now I realize, that for deployment to another server, I am required to move the JAAS login from global security to a security domain. When I do that, it breaks my web service. I get this SOAP Fault message: com.ibm.wsspi.wssecurity.SoapSecurityException: WSEC6520E: Construction of the login context failed. The exception is : javax.security.auth.login.LoginException: No LoginModules configured for MyLoginModule According to the IBM docs: The JAAS application logins, the JAAS system logins, and the JAAS J2C authentication data aliases can all be configured at the domain level. By default, all of the applications in the system have access to the JAAS logins configured at the global level. The security runtime first checks for the JAAS logins at the domain level. If it does not find them, it then checks for them in the global security configuration. Configure any of these JAAS logins at a domain only when you need to specify a login that is used exclusively by the applications in the security domain. So I am looking to make sure my application is in the domain, and I have tried everything I can think of. (I have assigned the domain to "all scopes", to the entire cell, etc.) No luck, I keep getting the same error response to my web service client. Any help or hints are appreciated.

  Read the article

• Java plugin in the browser doesn't work even though it is enabled

  - by Pratyush Nalam

  I installed the Java Development Kit (64-bit) recently and saw it includes the JRE plugin for 64-bit as well. But, since Firefox is 32-bit, I also installed JRE 32-bit version. This is what is shown in Programs and Features. Now, the problem is, the other day, I opened a site which required the Java plugin. The frame showed the regular Java loading animation and hung. Nothing happened after that. Like this: I checked Firefox's plugins section and it shows Java is enabled, so no issue there I tried other browsers - IE10 and Chrome but to no avail. It doesn't work anywhere. I saw another question which said that you have to install 64-bit then 32-bit. That's what I actually did as well. First, installed JDK 7 64-bit (which includes JRE 7 64-bit) and then installed JRE 7 32-bit. I even tried the Java website's Do I have Java? section and over there too, it just keeps spinning for ages (I have waited for more than 10-20 seconds). How do I go about now? This never happened to me in Windows 7. I am on Windows 8 Pro.

  Read the article

• Advice on migrating from a Samba PDC

  - by pgb

  When we started our software development company, we decided to use Samba as a PDC for the few Windows workstations we had. We use Samba with OpenLDAP, and it has been a good replacement for AD for almost 6 years now (using Windows XP workstations). Now I'm facing a few problems with our setup: The Linux server where the PDC runs is very outdated (and is a Gentoo install, don't ask why!) We started using Windows 7 on some of the workstations, and these can't join the Samba domain (there's a workaround, I know) Our company has grown a bit, and we have now about 20 workstations (and plan to have more in the near future). I have to reinstall our PDC, and was thinking on updating to another Linux distro and the latest Samba 3.4. However, I started having second thoughts, and now I think going to a Windows Server for the PDC is the way to go. The main drivers to opt for a Windows Server would be its easy administration and the ability to use Windows 7 out of the box, without any registry hacks. My question(s) then is(are): How should I do this migration? Can I keep the same domain name? What will happen to the users? Will they be recreated and won't be identified by the workstations as being the same user, even if the actual username is the same? What steps would you recommend me to migrate from Samba to Windows Server? Bonus question: If you think staying in Samba is the way to go with my current setup, I'm also interested on your thoughts.

  Read the article

• Which apache/mysql/php package is best for windows?

  - by crosenblum

  I have tried appservnetwork, was the best so far, but I haven't seen them do an update in ages, EasyPHP is just slow to load always. Wamp and Xamp, all put in their description that is not for production. I do not plan to host publicly this site or site's I am working on. But I do want a fast loading apache/mysql/php server for development purposes. I used to really like WLMP, which is Lighttpd for Windows, but that project seems unupdated or abandoned. I refuse to use IIS, but i have no desire to get into any wars over it. I run windows xp sp3 at my home pc. I will need to have a web server setup for professional work, as well as some fun websites I am working on. I just want it fast enough, so i can run it via localhost, and not take forever to load in the browser. Thank you... I plan mostly do php programming and perhaps coldfusion via this.

  Read the article

• How to update the hard disk device drivers for a ghosted hard drive image so it can run on different hardware: Ultra ATA > SATA

  - by rism

  I've ghosted a Winxp machine from one laptop with Ultra ATA drive, and would like to set it up on another laptop as a multiboot option on another hard driver with a SATA drive. I can install the partition fine but if i make it active and try to boot it it blue screens. The blue screen is so fast i cant even read it, other than to make out it's saying "something", im picking probably hard drive as it goes through POST fine. So basically i would like to boot into my Win7 OS, and then somehow manipulate the XP partition to use updated drivers for the new hard drive/laptop so that i can then at least boot into the XP OS on the new machine and update all the other drivers in safe mode or whatever to get it to run. I assume someone is going to tell me to just do a fresh install, but that kinda defeats the purpose of ghosting at this point. There is a significant amount of personalisation, development setup on the XP machine that i would like to just transfer as is. As it stands ive invested minmal time in getting it to run, just a ghost and recovery and then a blue screen boot or two, so its still well worth it to me, time wise to try this way. Thanks.

  Read the article

• Two hosting providers running simultaneously... possible / not possible? good practice / unnecessary?

  - by user29600

  For the sake of their reputation, I won't mention the names. But I'll just use: Business I worked for previously - ABC Web Dev Hosting company they used - XYZ Hosting I recently found out that XYZ Hosting had some sort of incident where they ended up losing a lot of their client's data - including ABC Web Dev's. ABC Web Dev was able to recover some of their customer's websites, after pulling them from their local development computers and putting them up on another hosting provider. They ended up losing a lot of clients because of it and their reputation ruined. I'm starting my own web dev company and I don't want to run into this same issue. I'm planning on using Rackspace but, although they are a great company, according to wikipedia they still have had downtime in their past. I thought it might be a good idea to try to run two providers at once, to ensure that if anything happened in one the websites would still be live because of the other. I know the websites would have to be pulling from one server at all times, but if there's a way to redirect requests to the second server if the first one is down that would solve my issue. As a note, we will have a staging environment setup locally which will allow for quick recovery if a provider did have any issues, however I'd like to avoid any downtime at all if possible. So my questions are: Has anyone tried running two providers simultaneously? Would this be considered good practice or am I going too far? Is there really any way to run two simultaneously where one server acts as a backup?

  Read the article

• Grant access for users on a separate domain to SharePoint

  - by Geo Ego

  Hello. I just completed development of a SharePoint site on a virtual server and am currently in the process of granting users from a different domain to the site. The SharePoint domain is SHAREPOINT, and the domain with the users I want to give access to is COMPANY. I have provided them with a link to the site and added them as users via SharePoint, which is all I thought I would need to do. However, when they go to the link, the site shows them a SharePoint error page. In the security event log, I am showing the following: Event Type: Failure Audit Event Source: Security Event Category: Object Access Event ID: 560 Date: 3/18/2010 Time: 11:11:49 AM User: COMPANY\ThisUser Computer: SHAREPOINT Description: Object Open: Object Server: Security Account Manager Object Type: SAM_ALIAS Object Name: DOMAINS\Account\Aliases\00000404 Handle ID: - Operation ID: {0,1719489} Process ID: 416 Image File Name: C:\WINDOWS\system32\lsass.exe Primary User Name: SHAREPOINT$ Primary Domain: COMPANY Primary Logon ID: (0x0,0x3E7) Client User Name: ThisUser Client Domain: PRINTRON Client Logon ID: (0x0,0x1A3BC2) Accesses: AddMember RemoveMember ListMembers ReadInformation Privileges: - Restricted Sid Count: 0 Access Mask: 0xF Then, four of these in a row: Event Type: Failure Audit Event Source: Security Event Category: Object Access Event ID: 560 Date: 3/18/2010 Time: 11:12:08 AM User: NT AUTHORITY\NETWORK SERVICE Computer: SHAREPOINT Description: Object Open: Object Server: SC Manager Object Type: SERVICE OBJECT Object Name: WinHttpAutoProxySvc Handle ID: - Operation ID: {0,1727132} Process ID: 404 Image File Name: C:\WINDOWS\system32\services.exe Primary User Name: SHAREPOINT$ Primary Domain: COMPANY Primary Logon ID: (0x0,0x3E7) Client User Name: NETWORK SERVICE Client Domain: NT AUTHORITY Client Logon ID: (0x0,0x3E4) Accesses: Query status of service Start the service Query information from service Privileges: - Restricted Sid Count: 0 Access Mask: 0x94 Any ideas what permissions I need to grant to the user to get them access to SharePoint?

  Read the article

• Compiling mod_auth_kerb on OS X

  - by bshacklett

  I'm trying to get mod_auth_kerb installed, but I can't seem to find any information on compiling it on OS X. I'm getting the following when I attempt to compile: ./apxs.sh "-I. -Ispnegokrb5 -I/include " "-dynamic -g -O2 -arch x86_64 -Wl,-search_paths_first -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lresolv -lresolv" "" "/Applications/XAMPP/xamppfiles/bin/apxs" "-c" "src/mod_auth_kerb.c" /Applications/XAMPP/xamppfiles/build/libtool --silent --mode=compile gcc -prefer-pic -I/Applications/XAMPP/xamppfiles/include -L/Applications/XAMPP/xamppfiles/lib -mmacosx-version-min=10.4 -arch i386 -arch ppc -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp-precomp -I/Applications/XAMPP/xamppfiles/include -I/Applications/XAMPP/xamppfiles/include -I/Applications/XAMPP/xamppfiles/include -I/Applications/XAMPP/xamppfiles/include -I. -Ispnegokrb5 -I/include -c -o src/mod_auth_kerb.lo src/mod_auth_kerb.c && touch src/mod_auth_kerb.slo src/mod_auth_kerb.c: In function ‘authenticate_user_krb5pwd’: src/mod_auth_kerb.c:1030: warning: passing argument 8 of ‘verify_krb5_user’ discards qualifiers from pointer target type src/mod_auth_kerb.c: In function ‘authenticate_user_krb5pwd’: src/mod_auth_kerb.c:1030: warning: passing argument 8 of ‘verify_krb5_user’ discards qualifiers from pointer target type /Applications/XAMPP/xamppfiles/build/libtool --silent --mode=link gcc -o src/mod_auth_kerb.la -dynamic -g -O2 -arch x86_64 -Wl,-search_paths_first -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lresolv -lresolv -rpath /Applications/XAMPP/xamppfiles/modules -module -avoid-version src/mod_auth_kerb.lo ld: warning: in src/.libs/mod_auth_kerb.o, missing required architecture x86_64 in file warning: no debug symbols in executable (-arch x86_64) I'm configuring as follows: ./configure --with-krb4=no CFLAGS='-g -O2 -arch x86_64' I should mention that I'm using XAMPP with the development package on this machine.

  Read the article

• What are the advantages and disadvantages of the various virtual machine image formats?

  - by Matt

  Xen and Virtualbox etc both support a range of different virtual machine image formats. These are: vmdk, vdi, qcow & qcow2, hdd & vhd. Without any bias toward a particular product, I'm wanting to know what are the advantages and disadvantages of the various formats both from a features perspective, robustness and speed? One piece of info I discovered in a forum post was this: "The major difference is that VDI uses relatively large blocks (1MB) when growing an image, and thus has less overhead for block pointers etc. but isn't ultimately space efficient in the sense that if a single byte is non-zero in such a 1MB block the entire space is used. VMDK in contrast uses 64K blocks, and thus has more management overhead and generally a bit less disk space consumption What offsets this is that VDI is more efficient when it comes to snapshots." You might be thinking, I want to know this because I want to know which format to choose? Not exactly, I'm developing some software which utilises these formats and want to support one or more of them. Simplicity, large disks and ease of development are my main drivers.

  Read the article

• PHP Startup: Unable to load dynamic library 'C:"\php\php_mysql.dll' - The specified module could not be loaded

  - by Tiny

  I'm trying to upgrade php 5.4.14 from php 5.4.3 in wamp server 2.2e. I have downloaded php-5.4.14-Win32-VC9-x86 (thread safe). Extracted it under C:\wamp\bin\php. Copied wampserver.conf from C:\wamp\bin\php\php5.4.3 to C:\wamp\bin\php\php5.4.14. Renamed php.ini-development to phpForApache.ini. -The port number the wamp server has been changed in the http.conf file to 8087 from its default 80. This is mentioned here though it is about upgrading from php 5.3.5 to php 5.4.0. After this, Restarting of the wamp server and services all over again has all been done and those two versions appeared in the menu php-versions (which is opened when the icon of the server is clicked). But when I attempt to enable a library like php_mysql or php_mysqli, a warning message box appears. PHP Startup: Unable to load dynamic library 'C:"\php\php_mysql.dll' - The specified module could not be loaded. I have also tried to removing the semicolon before them in the php.ini file but to no avail. I'm running Microsoft Windows XP Professional Version 2002, service pack 3. Where might be the problem? EDIT: I have changed extension_dir from C:\php to c:\wamp\bin\php\php5.4.14\ext\ in php.ini as the answer below indicates and the library is now loaded correctly but it says, 1045 - Access denied for user 'root'@'localhost' (using password: YES) though the user name and the password are the same as they are in MySQL in the config.inc.php file under phpmyadmin. I have also tried to restart MySQL56 service from Control Panel-Services(Local) but it keeps giving the same error. Does someone know why this happens?

  Read the article

• Recommended programming language for linux server management and web ui integration

  - by Brendan Martens

  I am interested in making an in house web ui to ease some of the management tasks I face with administrating many servers; think Canonical's Landscape. This means doing things like, applying package updates simultaneously across servers, perhaps installing a custom .deb (I use ubuntu/debian.) Reviewing server logs, executing custom scripts, viewing status information for all my servers. I hope to be able to reuse existing command line tools instead of rewriting the exact same operations in a different language myself. I really want to develop something that allows me to continue managing on the ssh level but offers the power of a web interface for easily applying the same infrastructure wide changes. They should not be mutually exclusive. What are some recommended programming languages to use for doing this kind of development and tying it into a web ui? Why do you recommend the language(s) you do? I am not an experienced programmer, but view this as an opportunity to scratch some of my own itches as well as become a better programmer. I do not care specifically if one language is harder than another, but am more interested in picking the best tools for the job from the beginning. Feel free to recommend any existing projects that already integrate management of many systems into a single cohesive web ui, except Landscape (not free,) Ebox (ebox control center not free) and webmin (I don't like it, feels clunky and does not integrate well with the "debian way" of maintaining a server, imo. Also, only manages one system.) Thanks for any ideas! Update: I am not looking to reinvent the wheel of systems management, I just want to "glue" many preexisting and excellent tools together where possible and appropriate; this is why I wonder about what languages can interact well with pre-existing command line tools, while making them manageable with a web ui.

  Read the article

• org-sort multi: date/time (?d ?t) | priority (?p) | title (?a)

  - by lawlist

  Is anyone aware of an org-sort function / modification that can refile / organize a group of TODO so that it sorts them by three (3) criteria: first sort by due date, second sort by priority, and third sort by by title of the task? EDIT: I believe that org-sort by deadline (?d) has a bug that cannot properly handle undated tasks. I am working on a workaround (i.e., moving the undated todo to a different heading before the deadline (?d) sort occurs), but perhaps the best thing to do would be to try and fix the original sorting function. Development of the workaround can be found in this thread (i.e., moving the undated tasks to a different heading in one fell swoop): How to automate org-refile for multiple todo EDIT: Apparently, the following code (ancient history) that I found on the internet was eventually modified and included as a part of org-sort-entries. Unfortunately, undated todo are not properly sorted when sorting by deadline -- i.e., they are mixed in with the dated todo. ;; multiple sort (defun org-sort-multi (&rest sort-types) "Multiple sorts on a certain level of an outline tree, or plain list items. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Example: To sort first by TODO status, then by priority, then by date, then alphabetically (case-sensitive) use the following call: (org-sort-multi '(?d ?p ?t (t . ?a)))" (interactive) (dolist (x (nreverse sort-types)) (when (char-valid-p x) (setq x (cons nil x))) (condition-case nil (org-sort-entries (car x) (cdr x)) (error nil)))) ;; sort current level (defun lawlist-sort (&rest sort-types) "Sort the current org level. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Defaults to \"?o ?p\" which is sorted by TODO status, then by priority" (interactive) (when (equal mode-name "Org") (let ((sort-types (or sort-types (if (or (org-entry-get nil "TODO") (org-entry-get nil "PRIORITY")) '(?d ?t ?p) ;; date, time, priority '((nil . ?a)))))) (save-excursion (outline-up-heading 1) (let ((start (point)) end) (while (and (not (bobp)) (not (eobp)) (<= (point) start)) (condition-case nil (outline-forward-same-level 1) (error (outline-up-heading 1)))) (unless (> (point) start) (goto-char (point-max))) (setq end (point)) (goto-char start) (apply 'org-sort-multi sort-types) (goto-char end) (when (eobp) (forward-line -1)) (when (looking-at "^\\s-*$") ;; (delete-line) ) (goto-char start) ;; (dotimes (x ) (org-cycle)) ))))) EDIT: Here is a more modern version of multi-sort, which is likely based upon further development of the above-code: (defun org-sort-all () (interactive) (save-excursion (goto-char (point-min)) (while (re-search-forward "^\* " nil t) (goto-char (match-beginning 0)) (condition-case err (progn (org-sort-entries t ?a) (org-sort-entries t ?p) (org-sort-entries t ?o) (forward-line)) (error nil))) (goto-char (point-min)) (while (re-search-forward "\* PROJECT " nil t) (goto-char (line-beginning-position)) (ignore-errors (org-sort-entries t ?a) (org-sort-entries t ?p) (org-sort-entries t ?o)) (forward-line)))) EDIT: The best option will be to fix sorting of deadlines (?d) so that undated todo are moved to the bottom of the outline, instead of mixed in with the dated todo. Here is an excerpt from the current org.el included within Emacs Trunk (as of July 1, 2013): (defun org-sort (with-case) "Call `org-sort-entries', `org-table-sort-lines' or `org-sort-list'. Optional argument WITH-CASE means sort case-sensitively." (interactive "P") (cond ((org-at-table-p) (org-call-with-arg 'org-table-sort-lines with-case)) ((org-at-item-p) (org-call-with-arg 'org-sort-list with-case)) (t (org-call-with-arg 'org-sort-entries with-case)))) (defun org-sort-remove-invisible (s) (remove-text-properties 0 (length s) org-rm-props s) (while (string-match org-bracket-link-regexp s) (setq s (replace-match (if (match-end 2) (match-string 3 s) (match-string 1 s)) t t s))) s) (defvar org-priority-regexp) ; defined later in the file (defvar org-after-sorting-entries-or-items-hook nil "Hook that is run after a bunch of entries or items have been sorted. When children are sorted, the cursor is in the parent line when this hook gets called. When a region or a plain list is sorted, the cursor will be in the first entry of the sorted region/list.") (defun org-sort-entries (&optional with-case sorting-type getkey-func compare-func property) "Sort entries on a certain level of an outline tree. If there is an active region, the entries in the region are sorted. Else, if the cursor is before the first entry, sort the top-level items. Else, the children of the entry at point are sorted. Sorting can be alphabetically, numerically, by date/time as given by a time stamp, by a property or by priority. The command prompts for the sorting type unless it has been given to the function through the SORTING-TYPE argument, which needs to be a character, \(?n ?N ?a ?A ?t ?T ?s ?S ?d ?D ?p ?P ?o ?O ?r ?R ?f ?F). Here is the precise meaning of each character: n Numerically, by converting the beginning of the entry/item to a number. a Alphabetically, ignoring the TODO keyword and the priority, if any. o By order of TODO keywords. t By date/time, either the first active time stamp in the entry, or, if none exist, by the first inactive one. s By the scheduled date/time. d By deadline date/time. c By creation time, which is assumed to be the first inactive time stamp at the beginning of a line. p By priority according to the cookie. r By the value of a property. Capital letters will reverse the sort order. If the SORTING-TYPE is ?f or ?F, then GETKEY-FUNC specifies a function to be called with point at the beginning of the record. It must return either a string or a number that should serve as the sorting key for that record. Comparing entries ignores case by default. However, with an optional argument WITH-CASE, the sorting considers case as well." (interactive "P") (let ((case-func (if with-case 'identity 'downcase)) (cmstr ;; The clock marker is lost when using `sort-subr', let's ;; store the clocking string. (when (equal (marker-buffer org-clock-marker) (current-buffer)) (save-excursion (goto-char org-clock-marker) (looking-back "^.*") (match-string-no-properties 0)))) start beg end stars re re2 txt what tmp) ;; Find beginning and end of region to sort (cond ((org-region-active-p) ;; we will sort the region (setq end (region-end) what "region") (goto-char (region-beginning)) (if (not (org-at-heading-p)) (outline-next-heading)) (setq start (point))) ((or (org-at-heading-p) (condition-case nil (progn (org-back-to-heading) t) (error nil))) ;; we will sort the children of the current headline (org-back-to-heading) (setq start (point) end (progn (org-end-of-subtree t t) (or (bolp) (insert "\n")) (org-back-over-empty-lines) (point)) what "children") (goto-char start) (show-subtree) (outline-next-heading)) (t ;; we will sort the top-level entries in this file (goto-char (point-min)) (or (org-at-heading-p) (outline-next-heading)) (setq start (point)) (goto-char (point-max)) (beginning-of-line 1) (when (looking-at ".*?\\S-") ;; File ends in a non-white line (end-of-line 1) (insert "\n")) (setq end (point-max)) (setq what "top-level") (goto-char start) (show-all))) (setq beg (point)) (if (>= beg end) (error "Nothing to sort")) (looking-at "\\(\\*+\\)") (setq stars (match-string 1) re (concat "^" (regexp-quote stars) " +") re2 (concat "^" (regexp-quote (substring stars 0 -1)) "[ \t\n]") txt (buffer-substring beg end)) (if (not (equal (substring txt -1) "\n")) (setq txt (concat txt "\n"))) (if (and (not (equal stars "*")) (string-match re2 txt)) (error "Region to sort contains a level above the first entry")) (unless sorting-type (message "Sort %s: [a]lpha [n]umeric [p]riority p[r]operty todo[o]rder [f]unc [t]ime [s]cheduled [d]eadline [c]reated A/N/P/R/O/F/T/S/D/C means reversed:" what) (setq sorting-type (read-char-exclusive)) (and (= (downcase sorting-type) ?f) (setq getkey-func (org-icompleting-read "Sort using function: " obarray 'fboundp t nil nil)) (setq getkey-func (intern getkey-func))) (and (= (downcase sorting-type) ?r) (setq property (org-icompleting-read "Property: " (mapcar 'list (org-buffer-property-keys t)) nil t)))) (message "Sorting entries...") (save-restriction (narrow-to-region start end) (let ((dcst (downcase sorting-type)) (case-fold-search nil) (now (current-time))) (sort-subr (/= dcst sorting-type) ;; This function moves to the beginning character of the "record" to ;; be sorted. (lambda nil (if (re-search-forward re nil t) (goto-char (match-beginning 0)) (goto-char (point-max)))) ;; This function moves to the last character of the "record" being ;; sorted. (lambda nil (save-match-data (condition-case nil (outline-forward-same-level 1) (error (goto-char (point-max)))))) ;; This function returns the value that gets sorted against. (lambda nil (cond ((= dcst ?n) (if (looking-at org-complex-heading-regexp) (string-to-number (match-string 4)) nil)) ((= dcst ?a) (if (looking-at org-complex-heading-regexp) (funcall case-func (match-string 4)) nil)) ((= dcst ?t) (let ((end (save-excursion (outline-next-heading) (point)))) (if (or (re-search-forward org-ts-regexp end t) (re-search-forward org-ts-regexp-both end t)) (org-time-string-to-seconds (match-string 0)) (org-float-time now)))) ((= dcst ?c) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward (concat "^[ \t]*\\[" org-ts-regexp1 "\\]") end t) (org-time-string-to-seconds (match-string 0)) (org-float-time now)))) ((= dcst ?s) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward org-scheduled-time-regexp end t) (org-time-string-to-seconds (match-string 1)) (org-float-time now)))) ((= dcst ?d) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward org-deadline-time-regexp end t) (org-time-string-to-seconds (match-string 1)) (org-float-time now)))) ((= dcst ?p) (if (re-search-forward org-priority-regexp (point-at-eol) t) (string-to-char (match-string 2)) org-default-priority)) ((= dcst ?r) (or (org-entry-get nil property) "")) ((= dcst ?o) (if (looking-at org-complex-heading-regexp) (- 9999 (length (member (match-string 2) org-todo-keywords-1))))) ((= dcst ?f) (if getkey-func (progn (setq tmp (funcall getkey-func)) (if (stringp tmp) (setq tmp (funcall case-func tmp))) tmp) (error "Invalid key function `%s'" getkey-func))) (t (error "Invalid sorting type `%c'" sorting-type)))) nil (cond ((= dcst ?a) 'string<) ((= dcst ?f) compare-func) ((member dcst '(?p ?t ?s ?d ?c)) '<))))) (run-hooks 'org-after-sorting-entries-or-items-hook) ;; Reset the clock marker if needed (when cmstr (save-excursion (goto-char start) (search-forward cmstr nil t) (move-marker org-clock-marker (point)))) (message "Sorting entries...done"))) (defun org-do-sort (table what &optional with-case sorting-type) "Sort TABLE of WHAT according to SORTING-TYPE. The user will be prompted for the SORTING-TYPE if the call to this function does not specify it. WHAT is only for the prompt, to indicate what is being sorted. The sorting key will be extracted from the car of the elements of the table. If WITH-CASE is non-nil, the sorting will be case-sensitive." (unless sorting-type (message "Sort %s: [a]lphabetic, [n]umeric, [t]ime. A/N/T means reversed:" what) (setq sorting-type (read-char-exclusive))) (let ((dcst (downcase sorting-type)) extractfun comparefun) ;; Define the appropriate functions (cond ((= dcst ?n) (setq extractfun 'string-to-number comparefun (if (= dcst sorting-type) '< '>))) ((= dcst ?a) (setq extractfun (if with-case (lambda(x) (org-sort-remove-invisible x)) (lambda(x) (downcase (org-sort-remove-invisible x)))) comparefun (if (= dcst sorting-type) 'string< (lambda (a b) (and (not (string< a b)) (not (string= a b))))))) ((= dcst ?t) (setq extractfun (lambda (x) (if (or (string-match org-ts-regexp x) (string-match org-ts-regexp-both x)) (org-float-time (org-time-string-to-time (match-string 0 x))) 0)) comparefun (if (= dcst sorting-type) '< '>))) (t (error "Invalid sorting type `%c'" sorting-type))) (sort (mapcar (lambda (x) (cons (funcall extractfun (car x)) (cdr x))) table) (lambda (a b) (funcall comparefun (car a) (car b))))))

  Read the article

• Unable to add datasource in ColdFusion 9 and SQL Server 2008 R2

  - by Evik James

  I just installed SQL Server 2008 R2 and ColdFusion 9.0.1 on my Windows 7 machine for development use only. I have ColdFusion running well and serving pages (that aren't connected to a database). I can view my databases in SQL Server Management Studio. I successfully restored a few small databases and now I am trying to set up datasources for them through the ColdFusion Administrator. On my other machine, this was super easy. Not so much this time. The database I just added is named "Test". I am getting this error: Connection verification failed for data source: Test java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: localhost:1433. Reason: Connection refused: connect The root cause was that: java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: localhost:1433. Reason: Connection refused: connect It looks like the connection between ColdFusion and SQL Server is being refused. I know, brilliant observation, right? On my other machine, I was able to create datasources with just the default settings, no server name, username, or password. Any clue as to what might be the cause and how I might fix it?

  Read the article

• VMware vSphere Hypervisor 5 with Intel SPL 5000 in Raid 0 no boot from DVD?

  - by Richard

  I hope this is the correct StackExchange, since I am only using StackOverflow for Web development, but need some help with my server configuration. I would like to install VMware vSphere Hypervisor 5 on my server here at home and run a view machines on it such as Windows Server 2008 and Red Hat. I used to have either OpenSuse or Windows Server 2008 installed but I would like to get into VMWare Hypervisor. My hardware configuration: - Intel S5000PSL with bios version S5000.86B.10.60.0091 build date 10/09/2008 as of read out of bios - E5420 @ 2.5GHz Intel Xeon CPU The Intel Virtualization Technology is enabled in the BIOS - DVD DH20A4P DVD Writer - 8GB ECC Ram I have configured a RAID 0 on my 2 WD 2TB SATA drives I have burned the Hypervisor 5 on an empty DVD and it is bootable, I tested it on my client PC. The main problem here is basically, that I cannot boot the DVD on my server. I have set the Boot Option to the DVD drive. I have booted from the BIOS straight in the DVD drive and it does not work. I do not see any error messages. The only thing I see are the PXE error messages when it tries booting from the network and other devices, obviously without any result. Does anybody know why I cannot boot the DVD? What could cause the problem? I have sucessfully installed Windows Server 2008 via original DVD about 1 year ago, so the DVD drive can read and does work. The DVD drive is available in the BIOS and I have checked all cables and none of them is loose in any way. I even see the light flashing but it does not want to boot from the DVD. I am looking forward to suggestions and things that I should check. Thank you very much

  Read the article

< Previous Page | 911 912 913 914 915 916 917 918 919 920 921 922  | Next Page >