Search Results

Search found 47090 results on 1884 pages for 'linux ubuntu customize'.

Page 92/1884 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

  • Firefox crash on first load on Ubuntu Linux on Windows Laptop

    - by Ira Baxter
    I've had a Dell Latitude laptop since about 2000 without managing to destroy it. A month ago the Windows 2000 system on it did something stupid to its file system and Windows was completely lost. No point in reinstalling Windows 2000, so I installed an Ubuntu Linux on the laptop. Everything seems normal (installed, rebooted, I can log in, run GnuChess, poke about). ... but ... when I attempt to launch Firefox from the top bar menu icon, I get a bunch of disk activity, the whirling cursor icon goes round a bit and then everything stops: disk, icon, mouse. Literally nothing happens for 5 minutes. Ubuntu is dead, as far as I can tell. A reboot, and I can repeat this reliably. So on the face of it, everything works but Firefox. That seems really strange. The only odd thing about this system when Firefox is booting is that while it has an Ethernet port (that worked fine under Windows), it isn't actually plugged into an Ethernet. As this is the first Firefox boot since the Ubuntu install, maybe Firefox mishandles Internet access? Why would that crash Ubuntu? (I need to go try the obvious experiment of plugging it in).

    Read the article

  • Performance monitoring on Linux/Unix

    - by ervingsb
    I run a few Windows servers and (Debian and Ubuntu) Linux and AIX servers. I would like to continously monitor performance on these systems in order to easily identify bottlenecks as well as to have an overview of the general activity on the servers. On Windows, I use Windows Performance Monitor (perfmon) for this. I set up these counters: For bottlenecks: Processor utilization : System\Processor Queue Length Memory utilization : Memory\Pages Input/Sec Disk Utilization : PhysicalDisk\Current Disk Queue Length\driveletter Network problems: Network Interface\Output Queue Length\nic name For general activity: Processor utilization : Processor\% Processor Time_Total Memory utilization : Process\Working Set_Total (or per specific process) Memory utilization : Memory\Available MBytes Disk Utilization : PhysicalDisk\Bytes/sec_Total (or per process) Network Utilization : Network Interface\Bytes Total/Sec\nic name (More information on the choice of these counters on: http://itcookbook.net/blog/windows-perfmon-top-ten-counters ) This works really well. It allows me to look in one place and identify most common bottlenecks. So my question is, how can I do something equivalent (or just very similar) on Linux servers? I have looked a bit on nmon (http://www.ibm.com/developerworks/aix/library/au-analyze_aix/) which is a free performance monitoring tool developed for AIX but also availble for Linux. However, I am not sure if nmon allows me to set up the above counters. Maybe it is because Linux and AIX does not allow monitoring these exact same measures. Is so, which ones should I choose and why? If nmon is not the tool to use for this, then what do you recommend?

    Read the article

  • Firefox crash on first load on Ubuntu Linux on older Dell Laptop

    - by Ira Baxter
    I've had a Dell Latitude laptop since about 2000 without managing to destroy it. A month ago the Windows 2000 system on it did something stupid to its file system and Windows was completely lost. No point in reinstalling Windows 2000, so I installed an Ubuntu Linux on the laptop. Everything seems normal (installed, rebooted, I can log in, run GnuChess, poke about). ... but ... when I attempt to launch Firefox from the top bar menu icon, I get a bunch of disk activity, the whirling cursor icon goes round a bit and then everything stops: disk, icon, mouse. Literally nothing happens for 5 minutes. Ubuntu is dead, as far as I can tell. A reboot, and I can repeat this reliably. So on the face of it, everything works but Firefox. That seems really strange. The only odd thing about this system when Firefox is booting is that while it has an Ethernet port (that worked fine under Windows), it isn't actually plugged into an Ethernet. As this is the first Firefox boot since the Ubuntu install, maybe Firefox mishandles Internet access? Why would that crash Ubuntu? (I need to go try the obvious experiment of plugging it in).

    Read the article

  • Epson Artisan 800 on Ubuntu/Linux

    - by Tim Lytle
    Update for Ubuntu 10.04: Printing should work 'out-of-box', scanning still needs the newer sane backend. Looking for a known good way to setup an Epson Artisan 800 on Ubuntu specifically or any linux box in general. It is a printer/scanner with ethernet/wifi/usb. I'd like to use it as a network printer/scanner being able to do both from my Windows and Ubuntu machines; however, if it needs to be physically connected to a computer (preferably the Ubuntu machine) that is doable (again, then sharing print/scan functions to the network). Basically, I'm looking for someone who has used this printer/scanner (or similar) in a multi-platform environment to share how the set it up and how well it worked. Updated: A little more information, like most printers (I expect) the documentation for the printer basically says, "don't use plug-n-play, run our setup CD from your Windows/Mac system", to do anything (set it up for network use even). I guess that's to make it easy for anyone else to setup, but when you're looking to use it with an unsupported (by Epson's documentation) OS, you're just stuck on your own. What I was hoping for was someone who could say, "Forget the bundled software, do [this] to set it up on wifi manually, install [this] to connect to the scanner from [os], printing works with [this] driver - at least that's how I set it up." I'll will (and have so far) use the information here, and post my own setup when I'm done, if there's no one else out there with that experience.

    Read the article

  • picking a linux compatable motherboard

    - by Chris
    Last time I bought a new computer (I build them myself) I got a motherboard that had really poor linux support for a long time. Specifically the audio. I had to wait months before the kernel supported the on board audio chipset. That is exactly the situation I'm trying to avoid this time around. I have some specific questions about "server motherboards" actually. I looked at a few models of server motherboards by intel, and some random models on newegg. I wasn't able to see much of a difference from regular desktop motherboard other than most had two sockets, and support for much more ram. These boards seem more popular with Linux users. Why? AMD and Intel both have server CPUs as well. Some question, what's the difference? To make this question more concrete, I was looking at this this motherboard. The main questions about it that I can't answer are: Can I get a motherboard without on board raid and audio? I wanted to get a hardware raid controller and a PCI audio card. I thought a server motherboard would be cheaper and not have these "extras", since who wants an audio card on a server? Where can I found out about Linux support for the components on this board? "Intel ICH10R", "Realtek ALC889", "Marvell 88E8056" I'm buying this computer to work as a Linux desktop for a lot of compiling, coding and audio/video work, but I don't want to rule out the possibility of installing windows and playing some games at one point. (even if the last game I got has been sitting in its box unopened for almost a year). Is it a good idea to buy a "server motherboard" and play games on it, or are desktop boards better value for this? The ultimate solution for me would be a motherboard that had GPL divers for onboard LAN, a single CPU socket, lots of PCI express and PCI. USB 3.0, and no fancy hard disk controllers since I'll be getting a separate one.

    Read the article

  • Trouble getting latest version of Git

    - by TheMethod
    I am using Ubuntu 10.04 LTS. I'm looking at using git as source control for personal projects and Github as a remote repository. I was having trouble pushing a commit to my remote github repo getting the following error message: The requested URL returned error: 403 while accessing https://github.com/Jstall/helloworld.git/info/refs When I did some digging I found that the problem could be me not having the latest version of Git. When I did a --version I found that I have version 1.7.0.4 locally. So I tried to update git using: sudo apt-get install git but get the following error: Reading package lists... Done Building dependency tree Reading state information... Done Package git is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package git has no installation candidate I've tried running: sudo apt-get update and trying again but it didn't seem to make a difference. I'm not sure if it's relevant but I'm also getting a couple of 404's when I run update: Err http://wine.budgetdedicated.com edgy/main Packages 404 Not Found Fetched 4,117B in 0s (5,142B/s) W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/edgy/universe/binary-i386/Packages.gz 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://wine.budgetdedicated.com/apt/dists/edgy/main/binary-i386/Packages.gz 404 Not Found I'm not sure when I should try next. Could anyone suggest a course of action to get this resolved? Any advice would be appreciated. Thanks much!

    Read the article

  • Nginx and automatic updates

    - by Desmond Hume
    I'm on Ubuntu 12.04.1 with unattended-upgrades configured for automatic security updates, and I installed Nginx by first adding deb http://nginx.org/packages/ubuntu/ lucid nginx deb-src http://nginx.org/packages/ubuntu/ lucid nginx to /etc/apt/sources.list file, just as was suggested by the official wiki, and then by sudo apt-get update sudo apt-get install nginx which installed Nginx with all the standard modules. But now I think I could make good use of one or two of the Nginx optional modules, like the gzip precompression module or some security-related one. So far, I see two ways of adding an optional module to Nginx, one is compiling and installing from the source code and the other is described in this article. So, which of the ways should I choose so that automatic updates still run for and apply to Nginx and its optional modules? Or should I create a cron job with a command/script specific for Nginx instead of using unattended-upgrades utility? Can I choose between volume updates and security-only updates to be automatically applied to the standard and optional modules? And finally, is there a possibility to automatically update Nginx's modules on the fly (without any connections having been dropped), like the documentation suggests it's possible with sudo kill -USR2 $( cat /run/nginx.pid ) P.S. Actually I'm not certain if unattended-upgrades utility would automatically update the standard modules in the first place, not enough time has passed since Nginx was installed to say for sure.

    Read the article

  • Get Illegal Instruction error when booting Linux in VirtualBox, works fine when booted directly

    - by rkjnsn
    I have a computer on which I am dual booting Windows 7 and Gentoo Linux (both 64-bit). I want to be able to load up my Linux installation in a VM while I am booted into Windows. I have installed VirtualBox and followed the instructions for creating a raw disk VMDK. When I start the VM, Linux starts booting, but then fails with the following error when unlocking my root partition: truecrypt[441] trap invalid opcode ip:373615538e0 sp:3dd0e0dfb60 error:0 in libpixman-1.so.0[373614d6000+8d000] Everything works fine when I boot into Linux directly. What could cause an illegal instruction to be hit in libpixman only when booting in VirtualBox? Update: As a troubleshooting step, I recompiled pixman without "-march", and no longer get an illegal instruction error in that library. (The boot fails in the same spot with the same error in a different library, however.) How can I determine the specific opcode that isn't working in VirtualBox so I can disable it in my CFLAGS without having to disable all CPU-specific optimizations? I am still confused as to why there would be any user-mode instruction that would fail to work in a VM. Is this a known limitation? My CPU is an Intel Core i7 3720QM, and I have hardware virtualization support enabled.

    Read the article

  • Setting up a Network Bridge on Linux VM (Windows 7 Host)

    - by GrandAdmiral
    I would like to use NetEm to simulate a low bandwidth environment while testing an Internet-connected device. My plan is to setup a bridge in a Linux VM (Linux Mint 13) on a Windows 7 host. Unfortunately I'm having trouble setting up the bridge. Then I can use NetEm in the Linux VM to limit the bandwidth to an external device. I went with the following script: ifconfig eth0 0.0.0.0 promisc up ifconfig eth1 0.0.0.0 promisc up Then create the bridge and bring it up: brctl addbr br0 brctl setfd br0 0 brctl addif br0 eth0 brctl addif br0 eth1 dhclient br0 ifconfig br0 up When I run that script, I see the following warning: Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service smbd reload Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the reload(8) utility, e.g. reload smbd The device connecting to the bridge is able to obtain an IP Address, but it can only ping the IP Address of the bridge (both are 10.2.32.xx). Then after a few minutes, other parts of our network go down. I'm not sure why, but once I kill the bridge the network is fine. Is it possible to setup a network bridge in a Linux VM? Do I need to do something else with the dhclient br0 part of the script? By the way, I'm using VirtualBox. The wired connection is eth0 and the wireless connection is eth1. The wired connection is connecting to the device and the wireless connection is going to the network. Both adapters are set up as bridged adapters with promiscuous mode set to "allow all".

    Read the article

  • Why do hosts prefer Linux to Windows Server?

    - by iconiK
    So far I see a HUGE majority of hosts provide only Linux shared hosting, providing Windows only to VPS (or even to only dedicated servers). Why is it so? While Windows is a lot more expensive than Linux (though it depends on a lot of factors, not just initial and support license cost), it also provides ASP.NET, IIS and of course, Microsoft SQL Server. I know in the past it might have been because of cPanel being Linux only but now they have a Windows version. But still, why is Linux predominantly used on shared hosting? PHP works on both systems. IIS can be (and probably is) faster. MySQL runs on both systems as well. cPanel has a Windows version. Python, Perl, Ruby, all run on Windows as well. You even have MS SQL Server Express, which I find more superior than MySQL in both speed and features. Access is there for low usage requirements, as is SQLite (which is so great for quick small stuff). And with PowerShell you have a good alternative to the Unix shell. EDIT: I am looking for common reasons, I realize each hosting company (and/or it's clients) may have different needs. This becomes very important when you get to VPS or Cloud which give you a full operating system to use.

    Read the article

  • Install VirtualBox on Ubuntu 12.04.1 (on [Samsung] Chromebook)

    - by iphonedev7
    I have dual booted Ubuntu Linux 12.04.1 LTS on my Samsung Series 5 ChromeBook, and am trying to run/install Oracle VirtualBox (from the generic .run file downloaded from their website). However, every time I try to run it (as root from the command line), it gives me the following error occurs: Please install the build and header files for your current Linux kernel. The current kernel version is 3.4.0 Problems were found which would prevent VirtualBox from installing. I have tried the version from the Software Center, as well as the command line installation, both of which gave me errors based on my linux-headers/linux-kernel/linux-[kernel]-image. Here's an error I keep getting (on the command line): First Installation: checking all kernels... It is likely that 3.4.0 belongs to a chroot's host Building only for 3.5.0-18-generic Building initial module for 3.5.0-18-generic ERROR (dkms apport): kernel package linux-headers-3.5.0-18-generic is not supported Error! Bad return status for module build on kernel: 3.5.0-18-generic (x86_64) Consult /var/lib/dkms/virtualbox/4.1.12/build/make.log for more information. Setting up virtualbox-qt (4.1.12-dfsg-2ubuntu0.2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place ...And one of the more cryptic errors I get when trying to start any Virtual Machine: Result Code: NS_ERROR_FAILURE (0x80004005) Component: Machine Interface: IMachine {5eaa9319-62fc-4b0a-843c-0cb1940f8a91}

    Read the article

  • Ubuntu 12.04/12.10 can't detect windows or any other partitions(Asus z77 UEFI BIOS)

    - by user971155
    I've recently completed tinkering my new pc(motherboard ASUS z77 with UEFI BIOS) and unfortunately not everything works quite well. After installing windows 7 ultimate on a single primary partition(SATA drive) I decided to allocate one more logical partition for additional needs. When I tried doing it with the manager - it said that it couldn't allocate requested size even though I certainly asked for much less than it was available. I thought that it might have been a windows issue and proceded to installing Ubuntu 12.10 x64. When the graphical interface loaded it showed me a message stating that it can't find any other operating system on the drive. When I used custom partioning option it showed me none of my current partions(including that with windows). However, when I boot with "Try Ubuntu" feature it does find them ! I find it weird though. Here's what the console present me with: ubuntu@ubuntu:~$ sudo os-prober /dev/sda1:Windows 7 (loader):Windows:chain ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00072b98 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 100020223 49906688 7 HPFS/NTFS/exFAT /dev/sda3 100022270 1250263039 575120385 5 Extended /dev/sda4 566669312 1250263039 341796864 83 Linux I also tried creating partitions from disk utility which results in error: , Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sda, start=51211402240, size=1923000000, type=0x83 Entering MS-DOS parser (offset=0, size=640135028736) MSDOS_MAGIC found looking at part 0 (offset 1048576, size 104857600, type 0x07) new part entry looking at part 1 (offset 105906176, size 51104448512, type 0x07) new part entry looking at part 2 (offset 51211402240, size 588923274240, type 0x05) Entering MS-DOS extended parser (offset=51211402240, size=588923274240) readfrom = 51211402240 MSDOS_MAGIC found Exiting MS-DOS extended parser looking at part 3 (offset 290134687744, size 349999988736, type 0x83) new part entry Exiting MS-DOS parser MSDOS partition table detected containing partition table scheme = 1 got it Error: Can't have overlapping partitions. ped_disk_new() failed Here's what I get when I try to install the system i.stack.imgur.com/pjlb9.png, i.stack.imgur.com/g1lXN.png P.S. It's strange that I even can't create any more partitions neither with disk-utility nor with windows 7 native tools

    Read the article

  • Routing table on Linux not respected

    - by MRHaarmann
    I have a very specific problem, building a Linux VPN endpoint (with external VPN Gateway), which should route certain networks over the tunnel, others via default gateway. The Linux VPN should do a NAT on the outgoing connections for the VPN peers. Setup is as following: Internet gateway LAN 192.168.25.1/24 VPN Gateway LAN 10.45.99.2/24 (VPN tunnel 10.45.99.1 to net 87.115.17.40/29, separate connection to Internet) Linux VPN Router eth0 192.168.25.71/24 eth0:503 10.45.99.1/24 Default 192.168.25.1 route to 87.115.17.40/29 via 10.45.99.2 (send_redirects disabled, ip_forward enabled) Linux clients (multiple): eth0 192.168.25.x/24 Default 192.168.25.1 route to 87.115.17.40/29 via 192.168.25.71 Ping to the machines via tunnel from the VPN Router is working. Now I want to establish a routing from my clients over the VPN gateway and the client packet gets routed to 192.168.25.1 ! traceroute output shows the packets get routed to 192.168.25.71, but then to 192.168.25.1. So the route is not respected in forward ! IPTables and Routing: ip route show 87.115.17.40/29 via 10.45.99.2 dev eth0 10.45.99.0/24 dev eth0 proto kernel scope link src 10.45.99.1 192.168.25.0/24 dev eth0 proto kernel scope link src 192.168.25.71 default via 192.168.25.1 dev eth0 iptables -A INPUT -i eth0:503 -j REJECT iptables -t nat -A POSTROUTING -o eth0:503 -j MASQUERADE iptables -A FORWARD -i eth0:503 -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 192.168.25.0/24 -o eth0:503 -j ACCEPT So what is wrong with my setup ? The route is chosen correctly from localhost, but all the clients get forwarded to the Internet GW. thanks for helping, Marcus

    Read the article

  • Linux virtualization choices with graphic acceleration / video card support

    - by Urbn
    I am in the process of building a new desktop machine for work and fun. I am looking to run a undecided flavor of Linux (guessing Ubuntu) as my primary OS and several Windows installs with a Windows 7 install for .net development and gaming as virtualized environments. From my previous experiences with virtualization software in Linux I was never able to find an application that offered descent video card support / graphic acceleration etc. to be capable of playing any games within one of the virtualized environments. And since I will be investing quite a bit of money into this system for gaming I would naturally want to find the best option available to achieve this setup. So Onto my question: Is there any virtualization software available for Linux that has full video card support, graphic acceleration and capable of taking advantage of everything the video cards have to offer within the virtualized environments? Or am I stuck with running Windows 7 as my primary OS and using virtualization for Linux and the other OS's? Also I have no preference on open/closed source and price range would be up to $175.00 to support at least 3 virtualized environments.

    Read the article

  • Ubuntu network card problem.

    - by Steve Greene
    Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, it works fine under Windows Vista. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System.

    Read the article

  • How to setup a virtual machine in Ubuntu desktop to run Debian Server

    - by stickman
    I want to run a virtual machine in my Ubuntu desktop that runs a Debian server. The purpose of this is to generate Debian packages. I have some C++ applications that were originally developed on my Ubuntu machine, and I need to (re)compile them on a Debian server in order to: build Deb packages for deployment on a Debian server make sure that the applications will definitely work on a debian server The idea is so that I can do 90% of my development on Ubuntu (where I am more comfortable), and deploy a binary package that definitely works on Debian. BTW, I am developing on Karmic Kola (Ubuntu 9.10). [Edit] Following the advice I got so far, I have installed debootstrap and Debian 'Lenny' on /srv/chroot/debian_lenny on my machine. I am not sure this is the server version, but in any case I dont think that matters for my purposes (though it would be useful to know how to specifically install the server version). At the moment though, I am like a fish out of water, since there is no GUI, and it is only a console that I have in the chroot jail. I had a look in the home folder (I cheated, by using the KNavigator in Ubuntu), and there are no folders there - which presumably mean that no users have been set up as yet in the Debian "system". I would like to know how to do the following: Download and install the dev tools needed for (re)compiling my C++ apps Copy my projects from the Ubuntu "system" to the Debian "system" After building the binaries, I would like to create a debian binary package containing all of my binaries, so that I can install the package on a Debian server (my remote server)

    Read the article

  • Automated Linux VMs on Hyper-V 2012

    - by Mick
    I have a requirement to create a ton of linux VMs for our customers (we run managed infrastructure) on Hyper-V 2012 in the coming months and I have an issue with automating it. Here is how I need it to work: User accesses their web page and creates a VM. VM is created with a unique IP and name User logs in over SSH I know Hyper-V quite well and can work with powershell and am a C# programmer so the development side of things is taken care of. I also know enough about Linux to be at least competent: I have used it on and off for a number of years but not done anything Enterprise-level with it. All this can be done easily by manual processes but I need to be able to script or program this to automate it as there could be hundreds of them being created but I don't know how. My first thought is to have a database with random-generated names and IPs already created but I don't know how to get a Linux VM to boot up and grab one from the database... I suppose a Kickstart script would take care of it but I don't know what to do from there. Here is what is bouncing around in my head: Create a std linux build. - Easy to do Someone clicks "Create VM" and I pull a name and IP from the database and write it to a kickstart script. - Easy to do I could then open the template VHDX file and copy in the script and then save it. - Not sure if possible User boots up new VM and the kickstart script gives it the name and IP I assigned it. My problem is that I don't know how to open a VHDX file and insert a kickstart script into it... can't figure it out. I am reaching here and this solution may be miles off... I am more used to creating Windows VMs with scripts and so on which i am more familiar with... any help would be appreciated. Thanks Mick

    Read the article

  • How can I upgradge from Ubuntu Intrepid Ibex 8.10 to Jaunty 9.04 when old-releases no longer has the necessary packages?

    - by tommy chheng
    I changed my sources.list to: deb http://old-releases.ubuntu.com/ubuntu/ intrepid main restricted universe multiverse deb http://old-releases.ubuntu.com/ubuntu/ intrepid-updates main restricted universe multiverse deb http://old-releases.ubuntu.com/ubuntu/ intrepid-security main restricted universe multiverse I tried installing sudo apt-get install update-manager-core but i get this error: 1 upgraded, 3 newly installed, 0 to remove and 40 not upgraded. Need to get 2506kB/2555kB of archives. After this operation, 4346kB of additional disk space will be used. Do you want to continue [Y/n]? Y Err http://old-releases.ubuntu.com intrepid-updates/main update-manager-core 1:0.93.34 404 Not Found Err http://old-releases.ubuntu.com intrepid-security/main dpkg 1.14.20ubuntu6.3 404 Not Found Failed to fetch http://old-releases.ubuntu.com/ubuntu/pool/main/d/dpkg/dpkg_1.14.20ubuntu6.3_amd64.deb 404 Not Found Failed to fetch http://old-releases.ubuntu.com/ubuntu/pool/main/u/update-manager/update-manager-core_0.93.34_amd64.deb 404 Not Found E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Running apt-get update or --fix-missing returns the same errors. How can I successfully upgrade from Intrepid Ibex to Jaunty 9.04?

    Read the article

  • Linux usd disk just create sg device

    - by MTilsted
    I have a Corsair R60 ssd disk which is a disk with both sata and usb connectors. But the usb thing seems to be a bit non-standard, or maybe its just my fedora linux. When I insert the disk using a usb cabel to a running Fedora 14 linux system, a device called /dev/sg3 is added but that is all. No new /dev/sd* device is created so I can't mount the disk. If I look at cat /proc/scsi/sg/device_strs I get ATA Hitachi HTS54321 FB2O HL-DT-ST DVDRAM GSA-T50N RP05 Seagate Desktop 0130 Corsair CSSD-R60GB2 So the disk is there. (The last entry) but my linux will for some reason not see it as a usb hard disk. When I insert other usb disks they work fine. It is only this specific disk which causes problems. I have tried on 3 different computers with the same result. A hint to the problem may be that if I add the disk to a windows system(With usb) the disk is called "A fixed disk" and not a portable disk as expected. The disk works fine with linux If i connect it with the sata cabel, but I would really like to have it working with usb too. (To mount it on computers without sata).

    Read the article

  • Postfix connects to wrong relay?

    - by Eric
    I am trying to set up postfix on my ubuntu server in order to send emails via my isp's smtp server. I seem to have missed something because the mail.log tells me: Jan 19 11:23:11 mediaserver postfix/smtp[5722]: CD73EA05B7: to=<[email protected]>, relay=new.mailia.net[85.183.240.20]:25, delay=6.2, delays=5.7/0.02/0.5/0, dsn=4.7.0, status=deferred (SASL authentication failed; server new.mailia.net[85.183.240.20] said: 535 5.7.0 Error: authentication failed: ) The relay "new.mailia.net[85.183.240.20]:25" was not set up by me. I use "relayhost = smtp.alice.de". Why is postfix trying to connect to a different server? Here is my main.cf: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = mediaserver alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mydestination = mediaserver, localhost.localdomain, , localhost relayhost = smtp.alice.de mynetworks = 127.0.0.0/8 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all myorigin = /etc/mailname inet_protocols = all sender_canonical_maps = hash:/etc/postfix/sender_canonical smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_password smtp_sasl_security_options = noanonymous Output of postconf -n: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all inet_protocols = ipv4 mailbox_size_limit = 0 mydestination = mediaserver, localhost.localdomain, , localhost myhostname = mediaserver mynetworks = 127.0.0.0/8 myorigin = /etc/mailname readme_directory = no recipient_delimiter = relayhost = smtp.alice.de sender_canonical_maps = hash:/etc/postfix/sender_canonical smtp_generic_maps = hash:/etc/postfix/generic smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_password smtp_sasl_security_options = noanonymous smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes

    Read the article

  • Ubuntu: Network connection seems to fail after some time

    - by chrischu
    I just bought a Shuttle XS-35 barebone mini-PC and put a 1 TB WD hard drive and 2 Gigs of RAM into it and installed Ubuntu onto it. The machine will post as a media server (streaming videos to my PS3) and as a webserver for some small private projects. Now I wanted to copy my videos from my Windows 7 machine to the Ubuntu machine and therefore created a Samba share on the Ubuntu machine. I tried copying the files with the standard Windows copy function and with SyncToy but after some time (sometimes 5 copied files, sometimes 120 copied files) the Samba share just disappears. When that happens I can't reach the internet from the Ubuntu machine although the network connection still seems to be fine (IP still there etc.). Between the machines lies a LinkSys router. When I try to ping my router (after the connection doesn't work anymore) from the Ubuntu machine only a very small subset of the packages actually get there (something around 20%). When I restart the Ubuntu machine everything seems to work normal again. I have no idea where the problem lies here. Does anybody have a clue? Thanks in advance!

    Read the article

  • Boot records messed on dual boot (win7 and ubuntu) machine with SSD and HDD

    - by Michael
    i have a lenovo ideapad y570 with two hard drives: SSD and normal HDD both managed by RapidDrive and windows 7 pre-installed. First, i have shrunk my 500 GB HDD a little bit to make some place for a linux installation. Then i installed linux mint 12 to it, also installed grub onto the drive (dev/sdb). Installation programm has not allowed me to install grub on sda. Then i replaced linux mint with ubuntu 12.04 but installed grub onto the SSD (which is dev/sda and was the default-option). After that i could boot into my windows, only ubuntu worked. So i did a research, and tried: rewriting mbr of windows into sda1, reinstalling grub, replacing grub2 with grub-legacy, and now i think my partitions table are totally messed. Here is fdisk -l output: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 * 2048 411647 204800 7 HPFS/NTFS/exFAT /dev/sda2 411648 1009430959 504509656 7 HPFS/NTFS/exFAT Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5e5d1cc8 Device Boot Start End Blocks Id System /dev/sdb1 * 1979 884389887 442193954+ 12 Compaq diagnostics /dev/sdb2 884391934 976771071 46189569 5 Extended /dev/sdb5 884391936 937705471 26656768 83 Linux /dev/sdb6 937707520 967006207 14649344 83 Linux /dev/sdb7 967008256 976771071 4881408 82 Linux swap / Solaris I also cant mount any windows partitions to recover data. And when i open gparted, the whole sda-disk appears unallocated and it states "can not have a partition outside the disk!", also the end-sector address of /dev/sda2 confuses me. If i boot from the SSD, it throws some mbr error and wont boot, if i boot from the HDD, i only get the grub bash. How do i restore the partition tables? I can boot only from a live-cd at the machine. Thanks for any help.

    Read the article

  • Write once, read many (WORM) using Linux file system

    - by phil_ayres
    I have a requirement to write files to a Linux file system that can not be subsequently overwritten, appended to, updated in any way, or deleted. Not by a sudo-er, root, or anybody. I am attempting to meet the requirements of the financial services regulations for recordkeeping, FINRA 17A-4, which basically requires that electronic documents are written to WORM (write once, read many) devices. I would very much like to avoid having to use DVDs or expensive EMC Centera devices. Is there a Linux file system, or can SELinux support the requirement for files to be made complete immutable immediately (or at least soon) after write? Or is anybody aware of a way I could enforce this on an existing file system using Linux permissions, etc? I understand that I can set readonly permissions, and the immutable attribute. But of course I expect that a root user would be able to unset those. I considered storing data to small volumes that are unmounted and then remounted read-only, but then I think that root could still unmount and remount as writable again. I'm looking for any smart ideas, and worst case scenario I'm willing to do a little coding to 'enhance' an existing file system to provide this. Assuming there is a file system that is a good starting point. And put in place a carefully configured Linux server to act as this type of network storage device, doing nothing else. After all of that, encryption on the files would be useful too!

    Read the article

  • PCI configuration method error (Linux Kernel)

    - by user326580
    (I'm not sure if here is the best place for that question, so I will be pleased if anyone suggests me a more proper forum for that.) I'm trying to install Ubuntu 12.04.4 in a netbook (from an usb), but the kernel stops very early in initialization process. After two days of research, I've found that it boots with the parameter pci=conf2 but not with the default conf1 method. Nevertheless, after kernel boot, it seems that Ubuntu can't find usb devices and I'm not be able to install it. Trying with Debian, its a graphic installer and I found that the mouse isn't working neither.I think pci devices are not working. I tried about 50% of kernel pci boot options in the kernel-parameters file (in conjunction with the implicit default conf1) without luck. Any suggestions? PS: The problem is the same with kernel 2.6 or 3. (In Spanish) No estoy seguro si éste es el mejor lugar para esta pregunta, por lo cual estaré encantado si alguno me sugiere un mejor lugar para ella. Estoy intentando instalar Ubuntu 12.04.4 en una netbook (desde un usb), pero el kernel se detiene muy temprano en la inicialización. Después de dos días de investigar, encontré que arranca con el parámetro pci=conf2 pero no con método default conf1. Sin embargo después de que el kernel arranca, parece que Ubuntu no logra encontrar los dispositivos usb y no puedo instalar el sistema. Intentando con Debian y su instalador gráfico, encontré que el ratón tampoco funcionaba, así que pienso que los dispositivos pci no están funcionando. Intenté con aproximadamente el 50% de las opciones de arranque del kernel para pci (en conjunción con el método implícito conf1) sin suerte. Alguna idea? PS: El problema es el mismo con el kernel 2.6 o 3.

    Read the article

  • Dual boot Windows 8 and Ubuntu 12.10 across a reboot

    - by AK4749
    My Setup: I have two separate SSDs, and each contains an independently bootable OS - W8 and U12.10. From my extremely limited knowledge, this means each has a functioning EFI partition(?). My default boot order (GA-Z68XP-UD3P mobo with UEFI firmware update) boots the UEFI partition containing windows first, but if I enter the BIOS I can select the "ubuntu" entry to successfully boot ubuntu. Both drives are GPT, and are EFI boots. What I want to do: Reboot Windows 8, re-enter W8 (this is happening now due to the default boot order). What I want to change, however, is to boot into Ubuntu if i reboot from ubuntu. Essentially, I would like to work within one OS unless I consciously choose otherwise. Normally, I would not even ask to something I thought was impossible, but... Why I think this is possible: When trying EasyBCD to add ubuntu to the W8 UEFI bootloader, I noticed an "iReboot" addon or something that allows you to select which OS to boot into from within the OS. Note that I ended up not using the NeoGrub entry to chain Ubuntu off the W8 bootloader because I couldn't get much help with it. Is this possible? Have I had too much coffee and gone insane? Thank you all for your time, AK

    Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >