Search Results

Search found 3276 results on 132 pages for 'luck'.

Page 92/132 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• dom0 enable IPv6 for guests

  - by user98651

  I am looking at deploying IPv6 to my virtual machines. Right now I have v6 working great on the dom0 using a 6in4 provided by Hurricane Electric as I do not have native v6. However, I would like to distribute some of the /48 I am receiving to the domUs (/64 per machine would be ideal, but I am open to your suggestions). Static configuration on the domU side is fine. All I want to accomplish is getting the traffic to pass through the dom0 to the domU. To say the least, I'm still trying to wrap my head around all the virtual interfaces and bridges Xen creates. Yes, I have Googled around for this a bit and have not found anything great. I tried using two "vif-route6" bash scripts with no luck (possibly due to my ignorance with Xen networking). I am still stuck (mainly in how to configure the dom0). I would like to imagine this problem is relatively easy to solve and I look forward to your suggestions and help! Edited post to clarify my end goal: getting IPv6 to domU guests. I am completely open to suggestions but am hoping for something other than setting up a tunnel for every guest.

  Read the article

• How can I setup OpenVPN with IPv4 and IPv6 using a tap device?

  - by Lekensteyn

  I've managed to setup OpenVPN for full IPv4 connectivity using tap0. Now I want to do the same for IPv6. Addresses and network setup (note that my real prefix is replaced by 2001:db8): 2001:db8::100:0:0/96 my assigned IPv6 range 2001:db8::100:abc:0/112 OpenVPN IPv6 range 2001:db8::100:abc:1 tap0 (on server) (set as gateway on client) 2001:db8::100:abc:2 tap0 (on client) 2001:db8::1:2:3:4 gateway for server Home laptop (tap0: 2001:db8::100:abc:2/112 gateway 2001:db8::100:abc:1/112) | | | (running Kubuntu 10.10; OpenVPN 2.1.0-3ubuntu1) | wifi | | router | | OpenVPN INTERNET | eth0 | /tap0 VPS (eth0:2001:db8::1:2:3:4/64 gateway 2001:db8::1) (tap0: 2001:db8::100:abc:1/112) (running Debian 6; OpenVPN 2.1.3-2) The server has both native IPv4 and IPv6 connectivity, the client has only IPv4. I can ping6 to and from my server over OpenVPN, but not to other machines (for example, ipv6.google.com). net.ipv6.conf.all.forwarding is set to 1, I've tried disabling net.ipv6.conf.all.accept_ra as well, without luck. Using tcpdump on both the server and client, I can see that packets are actually transferred over tap0 to eth0. The router (2001:db8::1) send a neighbor solicitation for the client (2001:db8::100:abc:2) to eth0 after it receives the ICMP6 echo-request. The server does not respond to that solicitation, which causes the ICMP6 echo-request not be routed to the destination. How can I make this IPv6 connection work?

  Read the article

• how to diagnose a hard system seizure? Dell+Ubuntu

  - by rob

  I've got Ubuntu 9.10 on a Dell Vostro 420 desktop, a little over a year old, which I use for plain vanilla work stuff (email, web, terminal, text editor). Every now and then, at totally random times, it completely freezes on me. Hard. Mouse and keyboard stop working, cursor stops blinking, clock stops moving. All I can do is hold down the power button on the front of the box to shut it off. Sometimes it happens after several months of continuous uptime; sometimes it happens a few minutes after a reboot, while all I've done is open a terminal to look at log files, or maybe firefox to do a google search. Each time, there is nothing at all in /var/log/messages at the time of the crash. This makes it seem like a hardware problem, and indeed a few months ago I opened the box and wiggled everything and the problem went away for a while. But now it's back. I went in and checked everything, took out each RAM card and reseated. No luck. I ran all the system diagnostics (the long version) and everything passed with flying colors. Something is messed up in this box, but without any useful logs or failed tests, how in the world am I going to find it? And of course, Dell's not gonna help me cause I went and replaced Windows with Ubuntu. What steps would you take next to track down this problem?

  Read the article

• Converting flv and mp4 video format to '.ogg' using FFmpeg

  - by user163906

  I have HostGator VPS server with FFmpeg installed. It allows me to convert .wmv to .flv as well as .mp4 files successfully using the following commands for flv and mp4: ffmpeg -i WantsABath.wmv -b 600k -r 24 -ar 22050 -ab 96k WantsABath.flv ffmpeg -i WantsABath.wmv WantsABath.mp4 but it won't allow me to convert any file format to .ogg. I tried using the command: ffmpeg -i input.mp4 -acodec libvorbis -vcodec libtheora -f ogv output.ogv by mondain but no luck with it. I am doubting that my VPS doesn't have libtheora installed. I tried configuring it by using SSH but I don't know how to make sure if it is installed or not. I tried checking with php_info but can't find anything regarding libtheora. Here's my FFmpeg version: FFmpeg version SVN-r19795, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --enable-libmp3lame --enable-libvorbis --disable-mmx --enable-shared --prefix=/usr/ --enable-gpl libavutil 50. 3. 0 / 50. 3. 0 libavcodec 52.35. 0 / 52.35. 0 libavformat 52.38. 0 / 52.38. 0 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0. 7. 1 / 0. 7. 1 This details doean't show libtheor Can anyone please suggest me something?

  Read the article

• MAMP Pro virtual hosts on Mountain Lion not being recognized

  - by user135242

  I'm running MAMP PRO 2.1.1 on OSX 10.8.1 and not having any luck getting Apache to recognize any hosts that have been set up in MAMP besides localhost. This only happens when trying to use port 80. When I switch to port 8888 everything runs fine. Mountain Lion's Apache has been disabled and I get no errors or warnings when starting MAMP and the servers. Any doc root I set for "localhost" runs without problem. Any other server name I define, however, results in "cannot connect" when viewing in Chrome (not to be confused with "cannot find" - the browser is in fact following /etc/hosts to 127.0.0.1, but MAMP's Apache is simply not responding) I was wondering if anyone else has run into this issue or knows how to solve it. I'm working on some WordPress development and it keeps wanting to redirect to the base URL (with no port reference) even during setup. I'm sure I could fix things from the WP side but I'd rather figure out what the root issue is with MAMP. Thanks in advance for any insight you can provide.

  Read the article

• Slow browsing through IE on Windows Server 2012

  - by Volodymyr

  We've run into strange issue on the freshly installed servers. H/W: IBM server X3550 M4 7914; OS: Windows Server 2012 Std. Then we try to browse on the servers thru IE, not all sites are opened or it takes too long time to open the page, i.e. very few of them can be opened. Local FW are disabled. Servers are in a new subnet and traffic is allowed for it. VLAN is configured properly Another Windows Server 2012 host is running OK and Internet access works fine, but it is VM running on Hyper-V 2012. No proxy is used on the network. At the same time, if one tries to establish telnet session to any site on 80/443 ports - it does work. Google works as well. I've tried to configure single Qlogic adapter to check if the issue remains - it does. Teaming is configured with the means of QLogic, not by built-in functionality. IE Enhanced Security is disabled. IE settings were reset, more than once. Why would certain sites work while others not - Idk. I also tried to disable ecncapability and restart server - no luck netsh int tcp set global ecncapability=disabled Any thoughts? UPD1 VMQ is disabled. Servers are not running Hyper-V. UPD2 Servers were rebuilt from scratch, got a mail a few mins ago. Issue still remains. Teaming is now configured with the means of Windows Server 2012.

  Read the article

• Exchange 2010 certificate errors

  - by Frederik Nielsen

  I have a problem with my newly setup Exchange environment for our hosted customers. First off, when configuring the outlook client, it gives a certificate warning although the certificate has been bought and setup. I am using a setup like this: autodiscover.CUSTOMERDOMAIN.TLD CNAME autodiscover.exchange.COMPANYDOMAIN.TLD (Companydomain is our company that hosts the exchange servers, customerdomain being the customers domain) Shouldn't that work? I know that Microsoft does something like that for Office365, but I really don't think they buy a certificate for every customer.. So I guess some redirection should be setup somehow - any guidance? Next thing: When we accept that error, and move on to actually starting Outlook, it states that the certificate is not valid for the RPC proxy server exchange.COMPANYDOMAIN.TLD - this domain is not right, as that domain is not included in the certificate. I would instead like this domain to be mail.exchange.COMPANYDOMAIN.TLD I tried to run this script setting both internal and external URL's to be the same, with no luck. Any guidance on this one? I am running Exchange 2010 SP2, with CAS, HT and MBX split up on 3 different servers.

  Read the article

• Windows 7 System File Checker (sfc) not working

  - by Andrew

  I have a strange problem with Windows 7 RTM. I'm running Ultimate 64-bit edition. Whenever I run sfc /scannow I get this error: Windows Resource Protection could not start the repair service. My research so far has told me that I need to set the Windows Module Installer and Windows Installer services' startup types to Manual. They already were, so I manually started those services and tried again. No luck. I've even booted into my Windows 7 repair disc and tried running sfc /scannow from that. All I get is this: A repair operation is already pending. Restart and try again. History: I'm trying to run sfc because I am unable to open any images in Windows Photo Viewer. Whenever I try, I get the error "Class not registered." I believe the problem started after I installed Gladinet, but I can't be sure. I've uninstalled Gladinet, but the problem remains. System Restore was disabled (yes, I know I'm stupid - you don't have to remind me). Please help. Thanks.

  Read the article

• HP EliteBook 8440P - USB ports stop working on docking station

  - by r0ca

  I have a HP Elitebook 8440P running Windows XP Pro SP3. I installed it on my docking station and everything went smooth for a while. Last week, my mouse and any other USB devices stoped working sudenly... It was working fine on my laptop itself but nothing on my docking station. LCD attached monitor works and same for LAN and PS2 keyboard. I updated the BIOS, Chipset, Video Drivers, also changed my docking station by a brand new one but the problem still comes back. I also noticed something in Device Manager... A Generic USB Root Hub has an error on it, a Yellow/Orange exclamation mark. I tried to update that driver but no luck. Windows is unable to process it. This seems to be the problem but can't fix it. I may only re-image my laptop but for me, I need to avoid that since I have so many apps installed on it. If anybody has any advice, I'll take it!

  Read the article

• Discover the public ip of a network without being connected

  - by Martin Trigaux

  Let say, I'm next to a network and can see the traffic (with airodump or similar tool) but can not decipher it (because I am not connected on the network). Is it possible to discover the public ip address of the network ? I know the MAC address of the users connected on the network but do I know the one of the router ? If yes, maybe there is a way to do the matching. I know IP addresses are not forever but some addresses are static and never change. Maybe there is a database of MAC address having recorded that. Google has a database that match MAC address and geographical coordinates so why not with IP addresses ? Other idea, if I know where am I, I can maybe guess the IP range used in the city by the ISP (is it findable ?) and then try to "ping" each IP on the range (if it is a /24, it's possible, even /16 maybe). Will I get some information like the MAC of the box or see some traffic on the network ? These are two ideas I had. I don't know if they are doable, certainly not perfect. Do you think of some others ? By trying several methods, maybe I can get a guess with a bit of luck. Thank you

  Read the article

• Win7 'locking' process/files/folders?

  - by Dynde

  I've had a fair bit problems with sometimes files/folders/processes being 'locked' by Windows. The weird thing is, it's not like the traditional sense, I think, where tools like UnlockIT and wholockme would work. It seems that just giving it a little often helps - making me think it could either be the HDD, the memory, or something in Windows. A scenario: I go into a folder - don't open anything at all, go back up, cut or drag-move the folder to someplace else, it says "Action can't be completed because the folder or a file in it is open in another program". Waiting sometimes 20 seconds sometimes a little longer, and I can move it. Another scenario is deleting a bunch of files in a folder, and it appears that everything is gone, but then suddenly after a few seconds an .exe file pops back up, and I can't delete it. Waiting a few minutes, then pressing refresh and it's gone. I have the strangest feeling that there's a problem with either HDD or memory. I already tried disabling Windows indexing service with no luck. Does anyone have any ideas? EDIT: I should say, that I have a very fast system, 16 GB DDR3 RAM, i7-2600k CPU, SSD main HDD, so I really should not be experiencing any sort of problems, where one might say that it's "reasonable" for the system not to respond right away. Edit2: And I updated SSD firmware a couple months ago, so it shouldn't be bad release FW either

  Read the article

• Can not boot windows XP from cloned hard disk - what can I do?

  - by Martin

  My configuration: a PC (some years old) with MSI K8N-Neo-4F Motherboard, 1 GB RAM. Disk 1 (Maxtor, SATA II, 250 GB): 2 Partitions, on Partition 1 (48 GB): Windows XP Professional (NTFS) on Partition 2 (190 GB): data (NTFS) I wanted to have a larger and faster disk (the PC is incredibly slow and permanently the disk is rattling when I try to open an application or during Windows startup), so I took Disk 2 (Seagate, Sata II, 500 GB), installed in the PC, created at first a 400 GB-partition at the end of the disk and cloned the data to it, which worked well Installed a swap partition and a partition for Ubuntu Linux 12.10 on the first "part" of the disk so I was able to boot Linux and the old Windows XP with the Linux "System selection" at startup. Now I wanted to move Windows XP to the new disk, deleted the Linux partitions cloned Windows XP to the new disk (with free tools - EASESUS), left both disks in the PC and tried to select the new hard drive during boot as boot partition. This did not work, the PC refused to boot from this second disk. I tried many things like making the boot partition on the 2nd drive "active" in the Windows System Preferences modifying the boot.ini file to boot from the second disk - tried to boot from it, but ended with an error message stating that it was not possible to boot from this disk because of a hardware failure or something else or so removing the original disk and plugging the new one on the same SATA port as the original one - also booting failed with an error message repairing the MBR by booting into recovery mode from the Windows XP Installation CD-ROM, selecting the second disk and doing "FIXMBR" which said that everything was fine with the MBR. after that at least the PC tried to boot from the newer disk and then startup was hanging during the blue screen with the Windows Logo.... no luck. ... deleting the cloned partition and cloning again - this time with Macrium Reflect Free version... - no success during booting. I tried a lot of things with no success, so I wonder what I am doing wrong?! What could I do to successfully clone my Win XP partition to replace the original disk by a larger one which is bootable.

  Read the article

• Is there any way to tweak / rotate mouse orientation? Any applications? Registry edits?

  - by calbar

  I've got a very frustrating issue with my new Logitech Marathon Mouse M705. It is absolutely perfect for what I need, with the exception that it tracks on an angle for some reason. What I mean is when you slide the cursor to the left, it trends upward - when you slide to the right, it trends down. Moving the cursor along a flat horizontal line is no longer a natural motion - you need to fight what I suspect is a mechanical error of some kind. Unfortunately, I've already exchanged this mouse once and tested both on different Windows 7 and Mac OS X machines - the problem continues to occur. Is there a software solution for me? I'm incredibly surprised there is no simple way to adjust the orientation... how can every mouse manufacturer possibly adjust their hardware to track to everyone's tastes? What about those who need to flip orientation a full 90 or 180 degrees? I only need to adjust mine a few degrees, but I'm sure that need has arisen as well. Anyway, I'm running the latest SetPoint drivers (6.00) on Windows 7 and there are no orientation options available. I've checked out uberOptions and the M705 isn't supported yet (with the last version update over 6 months ago). MAF Mouse instructions are a very strange series of mouse clicks to activate. This app also seems a little overkill and costs $$ (which I'm willing to pay as a last resort). Is there no universal registry value for mouse orientation? How about for SetPoint drivers specifically? I've done a simple search in regedit without any luck. An XML file somewhere? Anything?

  Read the article

• What Windows service binds a NIC to the network?

  - by Bigbio2002

  I have a server that takes several minutes for the NIC to bind itself to the network upon startup (it has a statically-configured IP). This causes DNS/WINS/Intersite Messaging to fail to start, since they're dependent on a network connection. While I'm still attempting to find a root cause to this issue (I've done firmware updates, checked for any odd drivers/services, no luck so far), but in the meantime, I want to adjust the load order of services to ensure that the NIC binds first before these services attempt to start. The only question is, which service is it? The server is running Server 2008 R2 and only has one NIC installed. (On a side note, there are two other small but odd problems occuring with the server. The server had the issue described in KB2298620, which I've fixed. The other problem occurs in Windows Server Backup. No events appear in the upper portion of the window, despite the fact that backups are running in the background. Whenever I attempt to modify the backup schedule, it gives me the error "Not enough storage is available to process this command" and appears to fail, when, in fact, it actually succeeds. These may be separate issues, but something tells me that some of these might share a common root cause.)

  Read the article

• Auto Launching PHP-FPM

  - by Seth

  My plist file <?xml version='1.0' encoding='UTF-8'?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > <plist version='1.0'> <dict> <key>Label</key><string>org.macports.php-fpm</string> <key>ProgramArguments</key> <array> <string>/opt/local/bin/daemondo</string> <string>--label=php-fpm</string> <string>--start-cmd</string> <string>/opt/local/sbin/php-fpm</string> <string>;</string> <string>--pid=fileauto</string> <string>--pidfile</string> <string>/opt/local/var/run/php-fpm/php-fpm.pid</string> </array> <key>Debug</key><false/> <key>Disabled</key><true/> <key>OnDemand</key><false/> </dict> </plist> After rebooting, it's not loading up automatically. I still have to manually start php-fpm. I have tried unloading and adding RunAtLoad etc. with no luck and tried both these launchctl commands. sudo launchctl load -F /Library/LaunchDaemons/org.macports.php-fpm.plist sudo launchctl load -w /Library/LaunchDaemons/org.macports.php-fpm.plist

  Read the article

• How can I configure Samba to share (read/write) any folder with root permissions?

  - by Mike Toews

  I have a CentOS 5 VirtualBox guest on a Win7x64 host. I am attempting to setup a read/write share a directory owned by root with my Windows host using Samba, but I'm having no luck after running around in circles. To simplify matters, I've disabled my Firewall (/etc/init.d/iptables stop). As security and permissions are irrelevant for this purpose, I'd rather not have to set up another unix user/group/password. Here is the output from testparm Load smb config files from /etc/samba/smb.conf rlimit_max: rlimit_max (1024) below minimum Windows limit (16384) Processing section "[Guest Share]" Loaded services file OK. Server role: ROLE_STANDALONE and the source of /etc/samba/smb.conf: [global] workgroup = WRKGRP netbios name = SMBSERVER security = SHARE load printers = No [Guest Share] comment = Guest access share path = /root/src read only = No guest ok = Yes Running /etc/init.d/smb restart shows an OK status. However, on my Windows host, I can only see the share folder on the guest \\IPv4, but I cannot go into "Guest Share": "The network name cannot be found" error message is a common error, with a likely cause: The user you are trying to access the share with does not have sufficient permissions to access the path for the share. Both read (r) and access (x) should be possible. Am I trying to use root as a passwordless Samba guest? I'd like to, is it possible? How can I configure Samba to share (read/write) any folder with root permissions?

  Read the article

• Change A Password

  - by Thomas

  I have a non-domain machine that I use with our company's domain resources over vpn regularly. I switched to Windows 8 (fresh install), and the "Change a password" option went away from the Ctrl-Alt-Del window. Can't seem to google anything about this subject, or find a way to access that password change dialog. I tried running the .reg file from http://www.sevenforums.com/tutorials/63014-ctrl-alt-del-screen-add-remove-change-password.html with no luck. I also tried to Disable "Remove Change Password" via gpedit.msc. I could do it from my domain laptop, but I like to do it on this machine because it updates all my saved copies of those credentials. My local account is tied to my hotmail account if that matters. Updates: Administrator account. I apologize for stating this was an upgrade, it was a fresh install to a diff't drive. 64-bit Pro install. Bounty's almost up If someone can just confirm that the Change A Password... should or should not be present on a non-domain, Live tied, Win8 install, I'll be satisfied that I can or cannot expect to fix it.

  Read the article

• OpenVPN access to a private network

  - by Gior312

  There are many similar topics about my issue, however I cannot figure out a solution for myself. There are three hosts. A without a routable address but with an Internet access. Server S with a routable Internet address and host B behind NAT in a private network. What I've managed to do is a OpenVPN connection between A and B via S. Everything works fine so far according to this manual VPN Setup What I want to do is to connect A to Bs private network 10.A.B.x I tried this manual but had no luck. So A has a vpn address 10.9.0.10, B's vpn address is 10.9.0.6 and B's private network is 10.20.20.0/24. When at the Server I try to make a route to Bs private network like this sudo route add 10.20.20.0 netmask 255.255.255.0 gw 10.9.0.6 dev tun0 it says "route: netmask 000000ff doesn't make sense with host route" but I don't know how to tell Server to look for a private network in a different way. Do you know how can I make it right ?

  Read the article

• Virtualbox Networking: XP Guest, Ubuntu Host: Connecting to Windows servers & local network?

  - by user51833

  Here's what I have: Windows XP running in VirtualBox 3.0.8_OSE r53138; Host OS = Ubuntu 9.10 "Karmic Koala"; Windows network in my office with smb fileservers; Guest OS is connected to the internet and is sharing folders with Host OS; Limited networking expertise. Here's what I actually need to do: Use MS Outlook in my XP guest with all its calendar-sharing features and stuff (if this is all done through the internet then great) - or find a Linux app that can do the same stuff; Map Windows network servers, eg. smb://server01/ in my XP guest (I can already access these in Ubuntu. Here's what I've tried with no luck: Entering the server address (example above) in my XP guest windows explorer address bar (got a "could not access the file, path or drive" error message - maybe if I could enter login/pass information? But I don't know how); Mapping the server as a network drive (Windows could not find the path); Mounting the server as one of my shared folders (I couldn't find it through the shared folders browser in VirtualBox - is there somewhere in the Linux filesystem that Ubuntu keeps links to mounted servers?).

  Read the article

• Very Slow DSL (ethernet) speed [New Interesting Update]

  - by Abhijit

  Very IMPORTANT and INTERESTING UPDATE: Due to some reason I just thought to do a complete new setup and this time I decided to again have openSUSE plus ubuntu. So I first reinstall lubuntu and then I installed OpenSUSE 12.2 (64 bit). Now, my DSL speed is working very normal and fine on opensuse. So this is very scary. Is it possible for any operating system to manipulate my NIC so that it will work fine only on that operating system and not on another os? Regarding positive thinking and not being paranoid, what is it that makes ONLY suse to get my NIC to work at normal speed but ubuntu can not do it? Not even fedora? Not even linux mint? What all these OS are lacking that enables suse to work great? == ORIGINAL QUESTION == I 'was' on opensuse 12.2 when my dsl speed was normal. Yesterday I switched from opensuse to ubuntu 12.04 and speed decreased. It came to range of 7-10-13-20-25-kbps. Then I switch to linux mint, and then to fedora. Still slow speed. When I was in ubuntu I disabled ipv6 but still no luck. Now I am in fedora but this time with DIFFERENT ISP. And still I am getting very slow sped. So my guess is this is nothing to do with os. What can be wrong? Is this problem of NIC? Does NIC speed decreases over time? Does NIC life ends over time as with keyboard or mouse? Help please All the os I used are 64 bit and my laptop is Compaq Presario A965Tu Intel Centrino DUal Core. Interesting thing to notice is I get normal speed while downloading torrent inside torrent client softwares. This slow speed issue applied to download from any web browser or installing software using terminal.

  Read the article

• Why is XSP/mono giving me file/write errors with lucence?

  - by acidzombie24

  I am using mono 2.6.7, xsp 2.8.? and i am not sure what else. I'll try downgrading xsp and whatever else. Today i notice my server randomly gets Http Error 500, internal server error. I looked in my log files http://www.pastie.org/1426236 and it appears that the problem is locking lucence which it does by creating a file called write.lock. This use to work with no problem but now it gives me pain. It will fix itself if i refresh the page several times but it will break just as easily. My other site will not work everytime i restart apache and i need to by hand delete the file (at least it doesnt get random 500 errors). However now it just says Lock obtain timed out: NativeFSLock@/var/www/SITE_2/App_Data/LuceneIndex_a/write.lock no matter what. I even chmod -R 777 the directory and still no luck. write.lock doesnt even exist. I have no clue whats going on. Any ideas?

  Read the article

• DirectAdmin Centos4 server has virus

  - by Rogier21

  Hello all, I have a problem with a webserver that runs Centos4 with DirectAdmin. Since a few weeks some websites hosted on it are not redirecting on search engines properly, they are redirected to some malware site, resulting in a ban from google. Now I have used 3 virusscanners: ClamAV: Didn't find anything Bitdefender: Found a 2-3 files with JS infection, deleted them AVG: Finds lots of files, but doesn't have the option to clean! The virus that it finds is: JS/Redir JS/Dropper Still the strange thing is: website a (www.aa.com) does not have any infected files (have gone through all the files manually, is a custom PHP app, nothing special) but does still have the same virus. Website b (www.bb.com) does have the infected files as only one. I deleted all these files and suspended the account, but no luck, still the same error. I do get the log entries on the website from the searchengines so the DNS entries are not changed. But now I have gone through the httpd files but cannot find anything. Where can I start looking for this?

  Read the article

• Notebook display problem (multiplication)

  - by SubniC

  Hi, I'm having some troubles with the display of a LG E500 notebook. The thing is that without any known reason the display starts to show the screen divided in eigth parts and each part show the display image as if I had a matrix of eigth displays :) I thought it could be some kind of refresh rate problem or driver related, but it is happening at boot-up as well and the BIOS. I got the computer completely unassambled yesterday and I check all the wires and connectors looking for something broken or unconected, but without luck... You can see a picture here of the problem (sorry for the low quality, but I think it illustrate the problem. EDIT 1: I uploaded a new pictrue, here you cans ee the problem better :) There are three horizontal lines that you can see just between the windows. You can see the grey line at the first moment you turn on the computer and the after the duplicated screens show up just like if they where arranged over a grid (over the horizontal lines...) I hope it makes any sense. Do you know what could be happening? or can you tell me what would you do? Thank you very much for your help.

  Read the article

• Can't install Hyper-V in Windows 8 Pro. Causes boot loop, pain & suffering

  - by Nick

  Hardware: Intel i7 2600K (not overclocked, SLAT compatible, virt. features enabled in bios) Asus Maximus IV Extreme-Z (Z68) 16Gb RAM 256Gb SSD Other non-trivial working parts Adding Hyper-V is causing a boot loop resulting in an attempt at automatic repair by Windows 8 after the second or third loop: I'm trying to get the Windows Phone 8 SDK installed and I've narrowed down my troubles to the Hyper-V feature in Win8. This is required to run the WP8 emulator and there are no install options to omit this feature. My first attempt completely borked the OS as I did not have a recent restore point or system image, so I did a completely clean install and made plenty of backups/restore points. I skipped the SDK install and went straight for the windows feature add-on for Hyper-V. This confirmed that Hyper-V is the issue as the same behavior resulted. I cannot find any hint in the Event Logs. Cancelling automatic recovery causes the same behavior to repeat. I don't have any other VM products installed. My only recourse is to use a restore point, try something else, install it again, and see what happens. No luck so far. I'm on my 10th attempt here. Any help would be much appreciated.

  Read the article

• How to Set Up an SMTP Submission Server on Linux

  - by Kevin Cox

  I was trying to set up a mail server with no luck. I want it to accept mail from authenticated users only and deliver them. I want the users to be able to connect over the internet. Ideally the mail server wouldn't accept any incoming mail. Essentially I want it to accept messages on a receiving port and transfer them to the intended recipient out port 25. If anyone has some good links and guides that would be awesome. I am quite familiar with linux but have never played around with MTA's and am currently running debian 6. More Specific Problem! Sorry, that was general and postfix is complex. I am having trouble enabling the submission port with encryption and authentication. What Works: Sending mail from the local machine. (sendmail [email protected]). Ports are open. (25 and 587) Connecting to 587 appears to work, I get a "need to starttls" warning and starttls appears to work. But when I try to connect with the next command I get the error below. # openssl s_client -connect localhost:587 -starttls smtp CONNECTED(00000003) depth=0 /CN=localhost.localdomain verify error:num=18:self signed certificate verify return:1 depth=0 /CN=localhost.localdomain verify return:1 --- Certificate chain 0 s:/CN=localhost.localdomain i:/CN=localhost.localdomain --- Server certificate -----BEGIN CERTIFICATE----- MIICvDCCAaQCCQCYHnCzLRUoMTANBgkqhkiG9w0BAQUFADAgMR4wHAYDVQQDExVs b2NhbGhvc3QubG9jYWxkb21haW4wHhcNMTIwMjE3MTMxOTA1WhcNMjIwMjE0MTMx OTA1WjAgMR4wHAYDVQQDExVsb2NhbGhvc3QubG9jYWxkb21haW4wggEiMA0GCSqG SIb3DQEBAQUAA4IBDwAwggEKAoIBAQDEFA/S6VhJihP6OGYrhEtL+SchWxPZGbgb VkgNJ6xK2dhR7hZXKcDtNddL3uf1YYWF76efS5oJPPjLb33NbHBb9imuD8PoynXN isz1oQEbzPE/07VC4srbsNIN92lldbRruDfjDrAbC/H+FBSUA2ImHvzc3xhIjdsb AbHasG1XBm8SkYULVedaD7I7YbnloCx0sTQgCM0Vjx29TXxPrpkcl6usjcQfZHqY ozg8X48Xm7F9CDip35Q+WwfZ6AcEkq9rJUOoZWrLWVcKusuYPCtUb6MdsZEH13IQ rA0+x8fUI3S0fW5xWWG0b4c5IxuM+eXz05DvB7mLyd+2+RwDAx2LAgMBAAEwDQYJ KoZIhvcNAQEFBQADggEBAAj1ib4lX28FhYdWv/RsHoGGFqf933SDipffBPM6Wlr0 jUn7wler7ilP65WVlTxDW+8PhdBmOrLUr0DO470AAS5uUOjdsPgGO+7VE/4/BN+/ naXVDzIcwyaiLbODIdG2s363V7gzibIuKUqOJ7oRLkwtxubt4D0CQN/7GNFY8cL2 in6FrYGDMNY+ve1tqPkukqQnes3DCeEo0+2KMGuwaJRQK3Es9WHotyrjrecPY170 dhDiLz4XaHU7xZwArAhMq/fay87liHvXR860tWq30oSb5DHQf4EloCQK4eJZQtFT B3xUDu7eFuCeXxjm4294YIPoWl5pbrP9vzLYAH+8ufE= -----END CERTIFICATE----- subject=/CN=localhost.localdomain issuer=/CN=localhost.localdomain --- No client certificate CA names sent --- SSL handshake has read 1605 bytes and written 354 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: E07926641A5EF22B15EB1D0E03FFF75588AB6464702CF4DC2166FFDAC1CA73E2 Session-ID-ctx: Master-Key: 454E8D5D40380DB3A73336775D6911B3DA289E4A1C9587DDC168EC09C2C3457CB30321E44CAD6AE65A66BAE9F33959A9 Key-Arg : None Start Time: 1349059796 Timeout : 300 (sec) Verify return code: 18 (self signed certificate) --- 250 DSN read:errno=0 If I try to connect from evolution I get the following error: The reported error was "HELO command failed: TCP connection reset by peer".

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >