Search Results

Search found 24624 results on 985 pages for 'linux rrt'.

Page 920/985 | < Previous Page | 916 917 918 919 920 921 922 923 924 925 926 927  | Next Page >

  • Which is more secure: Tomcat standalone or Tomcat behind Apache?

    - by NoozNooz42
    This question is not about performance, nor about load-balancing, etc. Which would be more secure: running Tomcat in standalone mode or running Tomcat behind apache? The thing is, Tomcat is written in Java and hence it is pretty much immune to buffer overrun/overflow (unless a buffer overrun in a C-written lib used by Tomcat can be triggered, but they're rare [the last I remember was in zlib, many many moons ago] and one heck of a hack to actually exploit), which gets rid of a lot of potential exploits. This page: http://wiki.apache.org/tomcat/FAQ/Security has this to say: There have been no public cases of damage done to a company, organization, or individual due to a Tomcat security issue... there have been only theoretical vulnerabilities found. All of those were addressed even though there were no documented cases of actual exploitation of these vulnerabilities. This, combined with the fact that buffer overrun/overflow are pretty much non-existent in Java, makes me believe that Tomcat in standalone mode is pretty secure. In addition to that, I can install both Java and Tomcat on Linux without needing to be root. The only moment I need to be root is to set up a transparent port 8080 to port 80 forwarding (and 8443 to 443). Two iptables line as root, that's all root is needed for. (I don't know for Apache). Apache is much more used than Tomcat and definitely does not have a security track record as good as Tomcat. What would make Tomcat + Apache more secure? What would make Tomcat + Apache less secure? In short: which is more secure, Tomcat standalone or Tomcat with Apache? (remembering that performance aren't an issue here)

    Read the article

  • Exclude list of specific files in wget

    - by nanker
    I am trying to download a lot of pages from a website on dial-up and it can be brutally slow. I have almost got the perfect wget command, but because I'm downloading pages from the same site wget wastes times downloading the same standard images for each page. If I know the name of the default page images, is there any way to have wget ignore and thus avoid downloading those for each and every page? Here is an example of one of the wget commands that my shell script generates into another shell script to download all of the pages: mkdir candy-canes-on-the-flannel-board-in-preschool cd candy-canes-on-the-flannel-board-in-preschool wget -p -nd -A jpg,html -k http://www.teachpreschool.org/2011/12/candy-canes-on-the-flannel-board-in-preschool/ wget -c --random-wait --timeout=30 --user-agent="Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.3) Gecko/2008092416 Firefox/3.0.3" http://www.teachpreschool.org/2011/12/candy-canes-on-the-flannel-board-in-preschool/ -O "candy-canes-on-the-flannel-board-in-preschool" rm Baby-and-Toddler.jpg Childrens-Books.jpg Creative-Art.jpg Felt-Fun.jpg Happy_Rainbow-e1338766526528.jpg index.html Language-and-Literacy.jpg Light-table-Button.jpg Math.jpg Outdoor-Play.jpg outer-jacket1-300x153.jpg preschoolspot-button-small.jpg robots.txt Science-and-Nature.jpg Signature-2.jpg Story-Telling.jpg Tags-on-Preschool.jpg Teaching-Two-and-Three-Year-olds.jpg cd ../ Now I realize the script is not likely as savvy as it could be but it is doing what I need at the moment except that you can see from the rm command that I would just like to prevent wget from downloading the files in the first place if possible. I almost forgot to mention, there are two wget commands and that is because the first one downloads the page as index.html and for some reason it does not open in my browser, however, when I open it and look at it in vim all of the page's content is there, so I am not sure why it does not open. But if I just issue the second wget command as it is then that page, same file really with an alternate name, opens up fine. Something that if I could fix would also help to streamline the process.

    Read the article

  • VPN Client solution

    - by realtek
    I have several VPN's that I need to establish on a daily basis but from multiple workstations. What I would like to do it have either a server or vpn router that can perform this connection itself and that I can then route traffic through this device or server depending on the subnet I am trying to reach. The issue is that I only use VPN Clients to connect, so I am basically trying to achieve almost a site to site VPN but by using basically a VPN Client type connection from my network. The main VPN Client I use is the Sonicwall Global VPN Client where I initially use a Preshared Key and then it always prompts me for a username and password (not RSA key). My question is, is there any type of linux distro or even a hardware vpn router that can do this and connect to a Sonicwall device as if it were a client? I have tried pfSense which is very good but it fails to connect, probably due to a mismatch of settings. I have tried many others. Even dd-wrt on my router but it does not support whatever protocol Sonicwall uses. (I thought L2TP/IPSec) but it appears it may not be that. Any advice would be great! The other other thing I have thought of that I have not tried yet is Windows Server Routing and Remote Access but I have a feeling that won't work either. Thanks

    Read the article

  • Firefox not using Kerberos despite being configured to

    - by Nicolas Raoul
    I am deploying Linux/Firefox on a corporate Kerberos network. I followed this Kerberos-on-Firefox procedure but still Firefox does not connect via the company's Kerberos. I am using Firefox 3.0.18 on RedHat EL Server 5.5 Here is what I did: Run kinit on the command line to create a Kerberos ticket Check with klist: the ticket is valid until tomorrow, service principal is krbtgt/[email protected]. In Firefox, set network.negotiate-auth.trusted-uris and network.negotiate-auth.delegation-uris to .dc.thecompany.com. Load the company's portal page via its full hostname: http://server37.thecompany.com/alfresco. (note: server37 is actually the machine I am running Firefox on, but that should not be a problem I guess) PROBLEM: the company's intranet portal still serves me the login/password page. The same portal correctly uses Kerberos on Internet Explorer/Windows 7 machines, same settings, and shows the user's personal page. The server does not see any Kerberos request coming. Did I do something wrong? I enabled NSPR_LOG_MODULES=negotiateauth:5 as explained here, but the log file stays empty.

    Read the article

  • Installing Windows 7 over PXE, preferably with domain autojoin

    - by Ivan Vucica
    At an educational non-profit, I've inherited a previously set-up Windows domain that, after the first reinstall of the machines, we ended up not using by simply not joining machines back into the domain. Over last summer, before the annual reinstall for shipping machines to the summer school, I toyed with the idea of installing Windows 7 over network, instead of just imaging the machines. It took a bit longer than I expected to figure out the basics; honestly, I expected that Windows would be more friendly for PXE installation out of the box. What I'm interested in is best practices for installing Windows 7 over PXE with domain autojoin. I'd love it if the whole setup could optionally be hosted on a UNIX based system as well. I've had some success by preparing an ISO using Windows Deployment Kit, and loading the ISO into memory. This was needed since I wanted a menu, and I think I couldn't get PXELINUX to chainload into Windows' bootloader. Unfortunately, I couldn't figure out much about customization of the Windows setup in that timeframe nor could I get Samba to work properly; studying the stuff ended up being too lengthy, especially the portion where I edited a disk image on Windows and copied it outside. WDK didn't make things easier by mounting the disk image into RAM, and writing it in its entirety when done with it, making me a very sad boy. I've recently found a different approach, too, that appears to be closer to Microsoft's original idea for netboot deployment and does not involve ISOs. So my question boils down to the following. What exact approach do you use for netbooting Windows 7 setup? How can Windows 7 setup be best customized to be completely unattended, including installation on specific system partition and not destroying the data partition, creation of passworded admin and default user, choice of MAC-address-based hostname, and joining a domain? As much details as possible for everyone's future reference would be appreciated. WDS isn't a bad choice, but if a Linux-based install can be used, that'd be better.

    Read the article

  • append $myorigin to localpart of 'from', append different domain to localpart of incomplete recipient address

    - by PJ P
    We have been having some trouble getting Postfix to behave in a very specific fashion in which sender and recipient addresses with only a localpart (i.e. no @domain) are handled differently. We have a number of applications that use mailx to send messages. We would like to know the username and hostname of the sending party. For example, if root sends an email from db001.company.local, we would like the email to be addressed from [email protected]. This is accomplished by ensuring $myorigin is set to $myhostname. We also want unqualified recipients to have a different domain appended. For example, if a message is sent to 'dbadmin' it should qualify to '[email protected]'. However, by the nature of Postfix and $myorigin, an unqualified recipient would instead qualify to [email protected]. We do not want to adjust the aliases on all servers to forward appropriately. (in fact, every possible recipient doesn't have an entry in /etc/passwd) All company employees have mailboxes on Exchange, which Postfix eventually routes to, and no local Linux/Unix mailboxes are used or access. We would love to tell our application owners to ensure they use a fully qualified email address for all recipients, but the powers that be dictate that any negligence must be accommodated. If we were to keep $myorigin equal to $myhostname, we could resolve this issue by having an entry such as the following in 'recipient_canonical_maps': @$myorigin @company.com However, unfortunately, we cannot use variables in these map files. We also want to avoid having to manually enter and maintain the actual hostname in 'recipient_canonical_maps' for each server. Perhaps once our servers are 'puppetized' we can dynamically adjust this file, but we're not there yet. After an afternoon of fiddling I've decided to reach out. Any thoughts? Thanks in advance.

    Read the article

  • Want to use something like Citrix XenDesktop, Free Alternative?

    - by Chris
    I'm looking to go into IT, general office server management, and it looks like XenDesktop would be a awesome tool to use. If I get it right, you would store a central image of the OS you want to deploy (in an iso file) on the main server. Then use XenDesktop to pull that image down to the client, and it will then boot the OS inside of the virtual machine. Does it download the image of the OS and store it locally (like cloning the VM onto the client?) I'd love to find a free (possibly open source?) alternative to this, I keep on hearing about KVM in Linux and PXE booting a minimalistic OS to use remote KVMs.... Would that be what I'm looking for? Ideally, I'd like a system.. - That allows me to manage one central image for multiple clients (virtualized hardware) - Easily boot a thin client OS that connected to XenDesktop. Would those things be possible with some kind of free alternative? Some guidance would be greatly appreciated.

    Read the article

  • Remote Socket Read In Multi-Threaded Application Returns Zero Bytes or EINTR (104)

    - by user39891
    Hi. Am a c-coder for a while now - neither a newbie nor an expert. Now, I have a certain daemoned application in C on a PPC Linux. I use PHP's socket_connect as a client to connect to this service locally. The server uses epoll for multiplexing connections via a Unix socket. A user submitted string is parsed for certain characters/words using strstr() and if found, spawns 4 joinable threads to different websites simultaneously. I use socket, connect, write and read, to interact with the said webservers via TCP on their port 80 in each thread. All connections and writes seems successful. Reads to the webserver sockets fail however, with either (A) all 3 threads seem to hang, and only one thread returns -1 and errno is set to 104. The responding thread takes like 10 minutes - an eternity long:-(. *I read somewhere that the 104 (is EINTR?), which in the network context suggests that ...'the connection was reset by peer'; or (B) 0 bytes from 3 threads, and only 1 of the 4 threads actually returns some data. Isn't the socket read/write thread-safe? I use thread-safe (and reentrant) libc functions such as strtok_r, gethostbyname_r, etc. *I doubt that the said webhosts are actually resetting the connection, because when I run a single-threaded standalone (everything else equal) all things works perfectly right, but of course in series not parallel. There's a second problem too (oops), I can't write back to the client who connect to my epoll-ed Unix socket. My daemon application will hang and hog CPU 100% for ever. Yet nothing is written to the clients end. Am sure the client (a very typical PHP socket application) hasn't closed the connection whenever this is happening - no error(s) detected either. Any ideas? I cannot figure-out whatever is wrong even with Valgrind, GDB or much logging. Kindly help where you can.

    Read the article

  • Kickstart: Serve dynamic kickstart images via a CGI or PHP script?

    - by Stefan Lasiewski
    I'd like to kickstart a couple dozen RHEL6/SL6 servers. However, some of these servers are different and I don't want to create a new ks.cfg file for each class of server. Are there any products which can generate a Kickstart file dynamically on the fly, from a template? For example, if I append a line like this to the KERNEL: APPEND ks=http://192.168.1.100/cgi-bin/ks.cgi Then the script ks.cgi can determine what host this is (Via the MAC address), and print out Kickstart options which are appropriate for that host. I could optionally override some options by passing parameters to the script, like this: APPEND ks=http://192.168.1.100/cgi-bin/ks.cgi?NODETYPE=production&IP=192.168.2.80 After we kickstart the server, we activate Cfengine/Puppet on this system and manage the system using our favorite Configuration Management product. We're experimenting with xCAT but it is proving too cumbersome. I've looked into Cobbler, but I'm not sure it does this. Update: A roll-your-own solution is discussed in the O'Reilly book: Managing RPM-Based Systems with Kickstart and Yum, Chapter 3. Customizing Your Kickstart Install Dynamic ks.cfg, which echos some of the comments in this thread: To implement such a tool is beyond the scope of this Short Cut, but I can walk through the high-level design. Any such solution would mix a data store (the things that change) with a templating solution (the things that don’t change). The data store would hold the per-machine data, such as the IP address and hostname. You would also need a unique identifier, perhaps the hostname, such that you could pick up a given machine’s data. The data store could be a flat file, XML data, or a relational database such as PostgreSQL or MySQL. In turn, to invoke the system, you pass a machine’s unique identifier as a URL parameter. For example: boot: linux ks=http://your.kickstart.server/gen_config?host-server25 In this example, the CGI (or servlet, or whatever) generates a ks.cfg for the machine server25. But where, oh where, is the code for ks.cgi?

    Read the article

  • Adding Netem Filter Rules

    - by fontsix
    iam new in programming and using linux. My Question is, is it possible to add Netem Filter Rules later ? I want to create an PHP-Interface for Netem and I don't know how much filters were required. This should be some kind of dynamically. In Example : A user with a static IP starts an Netem Command (Latency) with PHP Interface this means these five command werde executed by php in the first step $classid = 11; $handle = 10; "sudo tc qdisc add dev eth0 handle 1: root htb"; "sudo tc class add dev eth0 parent 1: classid 1:1 htb rate 100Mbps"; "sudo tc class add dev eth0 parent 1:1 classid 1:$classid htb rate 100Mbps"; "sudo tc qdisc add dev eth0 parent 1:$classid handle $handle: netem delay 100ms"; "sudo tc filter add dev eth0 protocol ip parent 1:0 prio 3 u32 match ip dst $dest flowid 1:$classid"; Now, if there would be a second user who wants to use Netem independent of the first user, i only want to execute the last 3 commands, like "sudo tc class add dev eth0 parent 1:1 classid 1:$classid htb rate 100Mbps"; "sudo tc qdisc add dev eth0 parent 1:$classid handle $handle: netem delay 100ms"; "sudo tc filter add dev eth0 protocol ip parent 1:0 prio 3 u32 match ip dst $dest flowid 1:$classid"; There is an Algorithmus for increasing variables $classid and $handle. This should work. Now my Question: Is it possible only to add these 3 commands to add a new class with new qdisc and a new filter rule ? Or how can i realize it ? The Apache Error_log tells me "sh: line 1: flowid: command not found" but i can't find any mistake. I hope you could help Best regards fontsix

    Read the article

  • Which version control should I use for my configuration files?

    - by rakete
    I want to store some of my configuration files (~/.emacs.d/, .Xdefaults, etc. linux $HOME stuff) in version control so I can easily sync them with my notebook/workplace and see my past changes and revert to them should the need arise. So far it seems to me that there are quite some people using git for this and I think that I too want to use a distributed vcs for this (if only to get more used to them) but I can't say that I am very experienced with all things dvcs. I did use darcs and git briefly and so far I can say that I really like the way git handles branches, and I think the possibility to have different branches within the same directory is especially useful for my use case. Darcs on the other hand has cherry picking of patches, which too is quite the convenient feature when managing configuration files (at least I assume it is). So, what would you recommend to use? And what would be your reasoning for your recommendation? What other vcs with nice feature that I haven't mentioned exist and would make a good vcs to store configuration files and why?

    Read the article

  • Finding useful crash-information in Windows 8 Consumer Preview

    - by Lukas Knuth
    I'm currently diving into C# and wanted to play around with the new Metro-styled-applications introduced with Windows 8, so I updated my Windows 7 to Windows 8 Consumer Preview. The problem I'm facing right now is, that the system freezes after 3-5 minutes. It does not take any input from the keyboard or mouse and it does not recover (at least not in less then 10 minutes). Since I have a background in Linux, I'd like to find some information about the cause of the freeze, but I have no idea where to search. I checked the system-logs (under "System Control" - "Management") but they only record that the system was shut down unexpectedly (doe to the face that I held down the power-button to reboot the PC). There is no useful crash-information in there. I don't want to spend hours on randomly reinstalling drivers and doing things that "might help". Isn't there any place I can find some useful information about the freeze? Before you ask: I installed Windows 8 as an updated on my old Windows 7 installation (which worked fine by the way). My hardware fits the minimum requirements (specs can be found here, the MacMini 3,1 model with 2GHz processor). I have updated the graphics-card drivers to the newest Windows 8 drivers from nVidia.

    Read the article

  • How can I enable pid and ppid fields in psacct dump-acct?

    - by annavt
    I am currently using the psacct package on Centos to perform accounting on processes run by users. The info file1 suggests that it is possible to output pid and ppid depending on what information your operating system provides in it's struct acct. pid and ppid are listed in /usr/include/linux/acct.h on my system: struct acct_v3 { char ac_flag; /* Flags */ char ac_version; /* Always set to ACCT_VERSION */ __u16 ac_tty; /* Control Terminal */ __u32 ac_exitcode; /* Exitcode */ __u32 ac_uid; /* Real User ID */ __u32 ac_gid; /* Real Group ID */ __u32 ac_pid; /* Process ID */ __u32 ac_ppid; /* Parent Process ID */ ... But pid and ppid are not output when I run dump-acct: # dump-acct /var/account/pacct.1 | tail awk | 0.0| 0.0| 81.0| 0| 0|8792.0|Thu Nov 24 04:03:04 2011 tmpwatch | 0.0| 0.0| 1.0| 0| 0|3816.0|Thu Nov 24 04:03:04 2011 cups | 0.0| 0.0| 4.0| 0| 0|8728.0|Thu Nov 24 04:03:04 2011 awk | 0.0| 0.0| 4.0| 0| 0|8792.0|Thu Nov 24 04:03:04 2011 runlevel | 0.0| 0.0| 0.0| 0| 0|3804.0|Thu Nov 24 04:03:04 2011 chkconfig | 0.0| 0.0| 0.0| 0| 0|3840.0|Thu Nov 24 04:03:04 2011 inn-cron-expire | 0.0| 0.0| 0.0| 0| 0|8728.0|Thu Nov 24 04:03:04 2011 awk | 0.0| 0.0| 0.0| 0| 0|8792.0|Thu Nov 24 04:03:04 2011 gzip | 5.0| 0.0| 9.0| 0| 0|4044.0|Thu Nov 24 04:03:04 2011 accton | 0.0| 0.0| 1.0| 0| 0| 0.0|Thu Nov 24 04:03:04 2011 Is it likely that there is no support in my kernel for this feature or that my psacct version does not support this? How can I add pid and ppid to my accounting logs? CentOS release 5.6 Kernel 2.6.18-238.19.1.el5 psacct 6.3.2 Thanks in advance Anna

    Read the article

  • Website Use Monitoring for 3 People

    - by linkedlinked
    I work in an IT startup with 2 partners, and I'm the programmer/IT guy -- in other words, the work horse. To make a long story short, I'm doing most of the work right now, while they spend all day on Facebook. That's OK, because they're paying my salary, but if the project fails, I'm sure they'll blame me for it (I'm doing my best to make sure that doesn't happen!), and I want some sort of recourse. I already have an app that blocks time-wasters on my local PC, and keeps logs of when the app is enabled (so I can say "I had Facebook blocked from 9am-5pm today.") Is there any way I can get a brief summary of the most heavily visited sites, split up by client PC? At the end of the month, I want to be able to say "You both load Facebook, on average, every 10 minutes. You spend hours a day on Youtube, and haven't opened up our bugtracker in weeks" and maybe have a nifty chart or graph to match it. We have a crappy D-Link router, and no IT budget. They are both on Windows Vista, I run Ubuntu Linux. I don't want to install any monitoring software on their PC, but I'm totally fine with, say, routing all the network traffic through my machine. I guess I can think of lots of ways to accomplish this (telnet into JSSH and list open tabs? log all the DNS requests, per-domain? even thinking of setting up a webcam on my desk and just keeping 5-minute snapshots...), I just don't really know where to start. Any advice is appreciated, thanks!

    Read the article

  • Errors with Using Webcam

    - by C.G.
    I have been having some issues accessing a webcam from my machine. Sometimes (not always) when I run a program that accesses the device (cheese, guvcview, and code using openCV), I get either of two messages, which lead to the program crashing. The first occurs after running the webcam for some time. libv4l2: error dequeuing buf: No such device VIDIOC_DQBUF: No such device The other will occur without even letting me have a chance to run the webcam. libv4l2: error turning on stream: No space left on device VIDIOC_STREAMON - Unable to start capture: No space left on device Occasionally after getting these errors I will also receive a message saying that no such device can be found for subsequent runs. Other than the times that the "No device found" message appears the webcam appears when I use lsusb. My machine runs Linux Fedora 16, and the webcam is a Logitech C920. I do have ffmpeg installed, and I have been able to run the web camera many times in the past without errors. What is particularly puzzling about these errors is that they just sprung up this past weekend. No new software or hardware has been installed on this machine recently; I haven't changed any settings recently either. It could possibly be a driver issue, but I don't know what could have changed which could lead to this issue. Any attempts at researching this problem has been fruitless as this seems to most commonly occur with multiple webcams. I am only working with one device. I'd appreciate any advice for this problem, as this has become a bit frustrating.

    Read the article

  • PhpMyAdmin import/export - strange character encoding issues.

    - by John Hunt
    Hello, I'm migrating a site to a new host, and there are a couple of databases on there. There's no SSH access so I'm stuck with phpmyadmin. The issue is that certain characters (namely just whitespace) seems to being corrupt on the new site (same html, and apache doesn't seem to be messing with any encodings - you can see the strange characters have changed when I use less on my linux machine after downloading a table dump from both servers.) The issue isn't as bad if I import into the new database as utf-8 - whitespace characters only have one funny A type symbol instead of two. I've been trying various combinations of character encoding etc to no avail. Exporting from: phpMyAdmin 2.6.2 MySQL 4.1.20 MySQL connection collation: utf8_general_ci MySQL charset: UTF-8 Unicode (utf8) Collation on tables and their fields is: latin1_swedish_ci Importing to: phpMyAdmin - 2.11.9.2 MySQL client version: 5.0.45 MySQL charset: UTF-8 Unicode (utf8) MySQL connection collation: utf8_general_ci The import sql has this kind of thing in it: ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=192 ; I get the impression this is actually a bug or something with mysqldump as nothing seems to work.. does anyone have any insight into this? Cheers, John.

    Read the article

  • Can I get all active directory passwords in clear text using reversible encryption?

    - by christian123
    EDIT: Can anybody actually answer the question? Thanks, I don't need no audit trail, I WILL know all the passwords and users can't change them and I will continue to do so. This is not for hacking! We recently migrated away from a old and rusty Linux/Samba domain to an active directory. We had a custom little interface to manage accounts there. It always stored the passwords of all users and all service accounts in cleartext in a secure location (Of course, many of you will certainly not think of this a being secure, but without real exploits nobody could read that) and disabled password changing on the samba domain controller. In addition, no user can ever select his own passwords, we create them using pwgen. We don't change them every 40 days or so, but only every 2 years to reward employees for really learning them and NOT writing them down. We need the passwords to e.g. go into user accounts and modify settings that are too complicated for group policies or to help users. These might certainly be controversial policies, but I want to continue them on AD. Now I save new accounts and their PWGEN-generated (pwgen creates nice sounding random words with nice amounts of vowels, consonants and numbers) manually into the old text-file that the old scripts used to maintain automatically. How can I get this functionality back in AD? I see that there is "reversible encryption" in AD accounts, probably for challenge response authentication systems that need the cleartext password stored on the server. Is there a script that displays all these passwords? That would be great. (Again: I trust my DC not to be compromised.) Or can I have a plugin into AD users&computers that gets a notification of every new password and stores it into a file? On clients that is possible with GINA-dlls, they can get notified about passwords and get the cleartext.

    Read the article

  • Setting up a network where packets are traced

    - by Marcus
    My situation is the following: I have an internet connection, which is shared between people. More or less obviously, people is using it to download illegal stuff. Since I'm the owner of the connection, I want to avoid being sued. I don't want to prevent the people from doing the things they want, but I want to be legally safe. Now, I have relatively little competences in network administration, so I was wondering: is it possible to setup a network, where the source and destination of the packets are logged? I would use this to prove, in case of lawsuit, that the traffic was coming from a given machine. if the idea is feasible, is there any wireless router on which I can install linux, where I can install the packet sniffer? how much space could the logs take (containing only the timestamp/source/destination), per GB of traffic? a very rough estimation would be very helpful. if a machine on my network is sending bittorrent packets to a certain IP, would this log be able to reflect the time, source ip and destination ip? I assume that obviously the torrent data would be encrypted and un-decryptable. Am I missing something? Is there a better strategy? Any pointer to documentation would be helpful as well - in that case, I would use this as starting point.

    Read the article

  • If I partition a drive connected via eSata will it show different partitions when connected via USB?

    - by jeffreypriebe
    I have an odd problem with an external drive. I'm formatting it connected to my laptop prior to connecting it to my router. The HDD enclosure has both an eSata and USB connections. Generally, I connect it via eSata to my laptop. I created my partitions and connected it to the router, but I see partition information that is different than what I created. After chasing leads concerning large HDD size, I mindlessly connected the HDD to my laptop with USB. Lo! I see the same partitions as the router. Attached are screenshots using the same program and the HDD in question. The only difference is the connection. For the first, I connected via eSata and hit "refresh" on the partition program. Then, turned off the HDD, disconnected the eSata cable, and connected via USB. Power and refresh. eSata: reports a total HDD size of 2328 GB, with four partitions (the third being 1.96TB) USB: reports a total HDD size of 280 GB, with three partitions (the third being 279 GB) Any idea why this is happening? It looks like it clearly is an issue of the 4K sector size and not playing nice with the USB enclosure. I tried it eSata and USB in Windows and Linux and it appears consistently that eSata is reporting correctly, USB incorrectly.

    Read the article

  • How to Install OS without DVD and USB boot

    - by Timothy James Reed
    I just purchased a used Dell F1D 1U rack mount server and would like to install Ubuntu or ESXi with Virtual Disks or anything for that matter. I'v read that Dell's have built in DRAC so you can access it remotely. There are 3 ethernet plugs in the back but I dont know which one to use. In the BIOS it says I can configure Remote access on [com1] or [com2] not sure if that is ethernet 1 & 2. I also set it up so to use a static IP adress. Thats as far as I have gone. Not sure what to do next. I'v Tried to do a PXE server with TFTP but get stuck at Error "cant locate file" or something like that. Not even sure I want to go that route anymore because of all the hassel of editing files. All my computers are OSX or Linux and the only Windows I have is via VMWare. What steps to i do now?

    Read the article

  • How to access remote network resource from local machine

    - by jerluc
    I just configured VPN access successfully so that I now can connect to my workstation at work from my personal Linux box at home. The problem is that all of my dev files for a server I'm locally running are on my personal box and cannot be transfered to my workstation (at least not in any timely manner over this connection given the amount of data, in addition to the many reconfigurations which would be required for the server to run even if I could somehow get the files across). So essentially, I am able to run my server locally on my personal computer, however, the data-sources required for the back-end are accessible only from within the office's network. But is there some way for me to somehow either access the data-sources directly through a VPN connection or even if I need to be a bit more convoluted by connecting via VPN to my workstation and then somehow connecting to the data-sources through my workstation to my personal computer? And here I could really care less about the speed of the connection from my server to the data-sources since they will probably only be fetched a few times every hour or so. Thanks! Sorry if this a stupid question and/or doesn't make any sense! (And sorry for anyone who read this at stackoverflow, I posted it in the wrong area.)

    Read the article

  • MicroSD card getting corrupted for no good reason

    - by ChaosR
    I recently bought an MicroSD card online. It's a Sandisk 16GB class 2. However, it has a nasty problem. Every time I fill it with my data, the fat tables get corrupted. I've tried reformatting it, blanking it, doesn't seem to solve the problem. I have tried windows and linux (ubuntu), both have the problem. I've used my usb microsd readers, and even tried putting it in my phone and putting data on it from there. All have this problem. Now the really odd thing is, besides the corrupted file tables, no programs can find anything wrong with the hardware. I've tried both chkdisk and "badblocks -w", neither give any type of error. Now I don't know if the actual data gets corrupted, or if its just filesystem tables. What happens is that one or more folders start showing a load of chinese-charred (random UTF8 symbols I suppose) folders and files, and it is impossible to do anything with those. All the other data (outside of the corrupted folders) seems fine. I've tried to test it, and the problem doesn't seem to show up until I fill the disk upto about 3~4GB. After that I can still access the data. But as soon as I eject/safely remove/unmount it, the bad things happen somehow. Next time I plug it in, the folders I most recently wrote to (but sometimes also the folders I wrote the time before last time to) are all gibberish. Does anybody have any clue what might be going on here? EDIT: It seems I can't even put ext3 or ext4 on it, they both complain about a corrupted journal. Gheh, guess something is really broken here.

    Read the article

  • Build suggestion for mini itx server [on hold]

    - by Spyros
    I am looking to create a home server and since there does not seem to be a nice ready made one to purchase, i thought of building a mini itx one. I am not familiar with the best hardware/case to pick and therefore i thought i would ask for your experience. I will most probably install a simple linux distro, probably Debian and most probably without a desktop environment as well. Therefore, I am not looking for the best graphics card, though a decent one is preferred for sure. I would say that the most important thing is that the case/hardware play well with each other and the machine has decent specs ( i think something like 8gb RAM and 1TB hdd is most probably my most important things). I understand that this question can be closed as subjective, but it would be a great help for me if some of you guys who have been doing a similar build, can suggest something. I tried to find a stack exchange variant for the question, but it seems that this one more closely relates to the subject. But I will definitely understand it if people close it due to being subjective in nature. If you can maybe move it somewhere or so, please feel free to do so. Thank you for your time :)

    Read the article

  • Display with intel integrated graphics, bitcoin mine with Radeon 6950

    - by karategeek6
    I'm on Ubuntu Linux 11.04 64 bit. I have an intel i5 with integrated graphics and a Radeon 6950, with one monitor. I would like to run my graphics on the integrated card, and run bitcoin mining on the 6950. I have bitcoin mining working when I use the 6950 for both display and mining. Every time I try and and use the integrated graphics instead, OpenCL doesn't recognize my 6950. Using aticonfig --initial when using the integrated graphics for display breaks things. So I used the xorg.conf it created as a basis and tried to manually edit it. I really don't know what I'm doing, though. My last attempt is given below. The graphics ran off the integrated card, but the 6950 wasn't recognized. Any help would be greatly appreciated! xorg.conf: #Section "ServerLayout" # Identifier "Intel Layout" # Screen "Default Screen" # Identifier "aticonfig Layout" # Screen "aticonfig-Screen[0]-0" # Screen 0 "aticonfig-Screen[0]-0" 0 0 #EndSection Section "Module" Load "glx" EndSection # Intel Section "Device" Identifier "Intel Integrated Graphics" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Monitor" Identifier "Default Monitor" Option "VendorName" "Monitor Vendor" Option "ModelName" "Monitor Name" Option "DPMS" "true" EndSection Section "Screen" Identifier "Default Screen" Device "Intel Integrated Graphics" Monitor "Default Monitor" DefaultDepth 24 EndSection # ATI Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • Can I get a domain controller not to act as DNS for the members?

    - by rsw
    Hi, Let me try to explain my current setup. I have one linux machine acting as DHCP and DNS (dhcpd3 and bind) in my network. This works fine, all computers I hook up to the network gets an IP address and proper DNS servers set. Let's call it 10.12.0.10 However, we also have a Windows Server 2003 Domain Controller in our network to which we add our Windows computers (running XP), let's call it 10.12.0.20. I noticed that when I run 'nslookup' on one of the windows machines, it says that the primary DNS is 10.12.0.20. This have not been much of a problem since: The Windows clients are stationary The Windows server in itself point out my real DHCP/DNS, since I can reach everything specified in it However, this turns out to be a problem when we use Laptops. They connect to the domain here and gets a DNS server, but when the user travels or connect the computer from home, we hit a problem. They are connected to their internet, but their DNS is 10.12.0.20 which they can't reach since they're at home and not at the office network. I solved this by removing the register key called "NameServer" with the value 10.12.0.20, but it gets set again whenever they logon to the domain the next time (when they get back to the office). Can I somehow make the computers take whatever DNS server they are handed when connecting to the internet or a home network, instead of always trying to reach the Domain Controller?

    Read the article

< Previous Page | 916 917 918 919 920 921 922 923 924 925 926 927  | Next Page >