void pointers - Page 920

Run Your Tests With Any NUnit Version

- by Alois Kraus

I always thought that the NUnit test runners and the test assemblies need to reference the same NUnit.Framework version. I wanted to be able to run my test assemblies with the newest GUI runner (currently 2.5.3). Ok so all I need to do is to reference both NUnit versions the newest one and the official for the current project. There is a nice article form Kent Bogart online how to reference the same assembly multiple times with different versions. The magic works by referencing one NUnit assembly with an alias which does prefix all types inside it. Then I could decorate my tests with the TestFixture and Test attribute from both NUnit versions and everything worked fine except that this was ugly. After playing a little bit around to make it simpler I found that I did not need to reference both NUnit.Framework assemblies. The test runners do not require the TestFixture and Test attribute in their specific version. That is really neat since the test runners are instructed by attributes what to do in a declarative way there is really no need to tie the runners to a specific version. At its core NUnit has this little method hidden to find matching TestFixtures and Tests public bool CanBuildFrom(Type type) { if (!(!type.IsAbstract || type.IsSealed)) { return false; } return (((Reflect.HasAttribute(type, "NUnit.Framework.TestFixtureAttribute", true) || Reflect.HasMethodWithAttribute(type, "NUnit.Framework.TestAttribute" , true)) || Reflect.HasMethodWithAttribute(type, "NUnit.Framework.TestCaseAttribute" , true)) || Reflect.HasMethodWithAttribute(type, "NUnit.Framework.TheoryAttribute" , true)); } That is versioning and backwards compatibility at its best. I tell NUnit what to do by decorating my tests classes with NUnit Attributes and the runner executes my intent without the need to bind me to a specific version. The contract between NUnit versions is actually a bit more complex (think of AssertExceptions) but this is also handled nicely by using not the concrete type but simply to check for the catched exception type by string. What can we learn from this? Versioning can be easy if the contract is small and the users of your library use it in a declarative way (Attributes). Everything beyond it will force you to reference several versions of the same assembly with all its consequences. Type equality is lost between versions so none of your casts will work. That means that you cannot simply use IBigInterface in two versions. You will need a wrapper to call the correct versioned one. To get out of this mess you can use one (and only one) version agnostic driver to encapsulate your business logic from the concrete versions. This is of course more work but as NUnit shows it can be easy. Simplicity is therefore not a nice thing to have but also requirement number one if you intend to make things more complex in version two and want to support any version (older and newer). Any interaction model above easy will not be maintainable. There are different approached to versioning. Below are my own personal observations how versioning works within the .NET Framwork and NUnit. Versioning Models 1. Bug Fixing and New Isolated Features When you only need to fix bugs there is no need to break anything. This is especially true when you have a big API surface. Microsoft did this with the .NET Framework 3.0 which did leave the CLR as is but delivered new assemblies for the features WPF, WCF and Windows Workflow Foundations. Their basic model was that the .NET 2.0 assemblies were declared as red assemblies which must not change (well mostly but each change was carefully reviewed to minimize the risk of breaking changes as much as possible) whereas the new green assemblies of .NET 3,3.5 did not have such obligations since they did implement new unrelated features which did not have any impact on the red assemblies. This is versioning strategy aimed at maximum compatibility and the delivery of new unrelated features. If you have a big API surface you should strive hard to do the same or you will break your customers code with every release. 2. New Breaking Features There are times when really new things need to be added to an existing product. The .NET Framework 4.0 did change the CLR in many ways which caused subtle different behavior although the API´s remained largely unchanged. Sometimes it is possible to simply recompile an application to make it work (e.g. changed method signature void Func() –> bool Func()) but behavioral changes need much more thought and cannot be automated. To minimize the impact .NET 2.0,3.0,3.5 applications will not automatically use the .NET 4.0 runtime when installed but they will keep using the “old” one. What is interesting is that a side by side execution model of both CLR versions (2 and 4) within one process is possible. Key to success was total isolation. You will have 2 GCs, 2 JIT compilers, 2 finalizer threads within one process. The two .NET runtimes cannot talk (except via the usual IPC mechanisms) to each other. Both runtimes share nothing and run independently within the same process. This enables Explorer plugins written for the CLR 2.0 to work even when a CLR 4 plugin is already running inside the Explorer process. The price for isolation is an increased memory footprint because everything is loaded and running two times. 3. New Non Breaking Features It really depends where you break things. NUnit has evolved and many different Assert, Expect… methods have been added. These changes are all localized in the NUnit.Framework assembly which can be easily extended. As long as the test execution contract (TestFixture, Test, AssertException) remains stable it is possible to write test executors which can run tests written for NUnit 10 because the execution contract has not changed. It is possible to write software which executes other components in a version independent way but this is only feasible if the interaction model is relatively simple. Versioning software is hard and it looks like it will remain hard since you suddenly work in a severely constrained environment when you try to innovate and to keep everything backwards compatible at the same time. These are contradicting goals and do not play well together. The easiest way out of this is to carefully watch what your customers are doing with your software. Minimizing the impact is much easier when you do not need to guess how many people will be broken when this or that is removed.

Read the article

Customize Team Build 2010 – Part 13: Get control over the Build Output

In the series the following parts have been published Part 1: Introduction Part 2: Add arguments and variables Part 3: Use more complex arguments Part 4: Create your own activity Part 5: Increase AssemblyVersion Part 6: Use custom type for an argument Part 7: How is the custom assembly found Part 8: Send information to the build log Part 9: Impersonate activities (run under other credentials) Part 10: Include Version Number in the Build Number Part 11: Speed up opening my build process template Part 12: How to debug my custom activities Part 13: Get control over the Build Output Part 14: Execute a PowerShell script Part 15: Fail a build based on the exit code of a console application In the part 8, I have explained how you can add informational messages, warnings or errors to the build output. If you want to integrate with other lines of text to the build output, you need to do more. This post will show you how you can add extra steps, additional information and hyperlinks to the build output. UPDATE 13-12-2010: Thanks to Jason Pricket, it is now also possible to not show every activity in the build log. This is really useful when you are doing for-loops in your template. To see how you can do that, check out Jason's blog: http://blogs.msdn.com/b/jpricket/archive/2010/12/09/tfs-2010-making-your-build-log-less-noisy.aspx Add an hyperlink to the end of the build output Lets start with a simple example of how you can adjust the build output. In this case we are going to add at the end of the build output an hyperlink where a user can click on to for example start the deployment to the test environment. In part 4 you can find information how you can create a custom activity To add information to the build output, you need the BuildDetail. This value is a variable in your xaml and is thus easily transferable to you custom activity. Besides the BuildDetail the user has also to specify the text and the url that has to be added to the end of the build output. The following code segment shows you how you can achieve this. [BuildActivity(HostEnvironmentOption.All)] public sealed class AddHyperlinkToBuildOutput : CodeActivity { [RequiredArgument] public InArgument<IBuildDetail> BuildDetail { get; set; } [RequiredArgument] public InArgument<string> DisplayText { get; set; } [RequiredArgument] public InArgument<string> Url { get; set; } protected override void Execute(CodeActivityContext context) { // Obtain the runtime value of the input arguments IBuildDetail buildDetail = context.GetValue(this.BuildDetail); string displayText = context.GetValue(this.DisplayText); string url = context.GetValue(this.Url); // Add the hyperlink buildDetail.Information.AddExternalLink(displayText, new Uri(url)); buildDetail.Information.Save(); } } If you add this activity to somewhere in your build process template (within the scope Run on Agent), you will get the following build output Add an line of text to the build output The next challenge is to add this kind of output not only to the end of the build output but at the step that is currently executing. To be able to do this, you need the current node in the build output. The following code shows you how you can achieve this. First you need to get the current activity tracking, which you can get with the following line of code IActivityTracking currentTracking = context.GetExtension<IBuildLoggingExtension>().GetActivityTracking(context); Then you can create a new node and set its type to Activity Tracking Node (so copy it from the current node) and do nice things with the node. IBuildInformationNode childNode = currentTracking.Node.Children.CreateNode(); childNode.Type = currentTracking.Node.Type; childNode.Fields.Add("DisplayText", "This text is displayed."); You can also add a build step to display progress IBuildStep buildStep = childNode.Children.AddBuildStep("Custom Build Step", "This is my custom build step"); buildStep.FinishTime = DateTime.Now.AddSeconds(10); buildStep.Status = BuildStepStatus.Succeeded; Or you can add an hyperlink to the node childNode.Children.AddExternalLink("My link", new Uri(http://www.ewaldhofman.nl)); When you combine this together you get the following result in the build output You can download the full solution at BuildProcess.zip. It will include the sources of every part and will continue to evolve.

Read the article

Customize Team Build 2010 – Part 13: Get control over the Build Output

In the series the following parts have been published Part 1: Introduction Part 2: Add arguments and variables Part 3: Use more complex arguments Part 4: Create your own activity Part 5: Increase AssemblyVersion Part 6: Use custom type for an argument Part 7: How is the custom assembly found Part 8: Send information to the build log Part 9: Impersonate activities (run under other credentials) Part 10: Include Version Number in the Build Number Part 11: Speed up opening my build process template Part 12: How to debug my custom activities Part 13: Get control over the Build Output Part 14: Execute a PowerShell script Part 15: Fail a build based on the exit code of a console application In the part 8, I have explained how you can add informational messages, warnings or errors to the build output. If you want to integrate with other lines of text to the build output, you need to do more. This post will show you how you can add extra steps, additional information and hyperlinks to the build output. Add an hyperlink to the end of the build output Lets start with a simple example of how you can adjust the build output. In this case we are going to add at the end of the build output an hyperlink where a user can click on to for example start the deployment to the test environment. In part 4 you can find information how you can create a custom activity To add information to the build output, you need the BuildDetail. This value is a variable in your xaml and is thus easily transferable to you custom activity. Besides the BuildDetail the user has also to specify the text and the url that has to be added to the end of the build output. The following code segment shows you how you can achieve this. [BuildActivity(HostEnvironmentOption.All)] public sealed class AddHyperlinkToBuildOutput : CodeActivity { [RequiredArgument] public InArgument<IBuildDetail> BuildDetail { get; set; } [RequiredArgument] public InArgument<string> DisplayText { get; set; } [RequiredArgument] public InArgument<string> Url { get; set; } protected override void Execute(CodeActivityContext context) { // Obtain the runtime value of the input arguments IBuildDetail buildDetail = context.GetValue(this.BuildDetail); string displayText = context.GetValue(this.DisplayText); string url = context.GetValue(this.Url); // Add the hyperlink buildDetail.Information.AddExternalLink(displayText, new Uri(url)); buildDetail.Information.Save(); } } If you add this activity to somewhere in your build process template (within the scope Run on Agent), you will get the following build output Add an line of text to the build output The next challenge is to add this kind of output not only to the end of the build output but at the step that is currently executing. To be able to do this, you need the current node in the build output. The following code shows you how you can achieve this. First you need to get the current activity tracking, which you can get with the following line of code IActivityTracking currentTracking = context.GetExtension<IBuildLoggingExtension>().GetActivityTracking(context); Then you can create a new node and set its type to Activity Tracking Node (so copy it from the current node) and do nice things with the node. IBuildInformationNode childNode = currentTracking.Node.Children.CreateNode(); childNode.Type = currentTracking.Node.Type; childNode.Fields.Add("DisplayText", "This text is displayed."); You can also add a build step to display progress IBuildStep buildStep = childNode.Children.AddBuildStep("Custom Build Step", "This is my custom build step"); buildStep.FinishTime = DateTime.Now.AddSeconds(10); buildStep.Status = BuildStepStatus.Succeeded; Or you can add an hyperlink to the node childNode.Children.AddExternalLink("My link", new Uri(http://www.ewaldhofman.nl)); When you combine this together you get the following result in the build output You can download the full solution at BuildProcess.zip. It will include the sources of every part and will continue to evolve.

Read the article

Demystifying Silverlight Dependency Properties

- by dwahlin

I have the opportunity to teach a lot of people about Silverlight (amongst other technologies) and one of the topics that definitely confuses people initially is the concept of dependency properties. I confess that when I first heard about them my initial thought was “Why do we need a specialized type of property?” While you can certainly use standard CLR properties in Silverlight applications, Silverlight relies heavily on dependency properties for just about everything it does behind the scenes. In fact, dependency properties are an essential part of the data binding, template, style and animation functionality available in Silverlight. They simply back standard CLR properties. In this post I wanted to put together a (hopefully) simple explanation of dependency properties and why you should care about them if you’re currently working with Silverlight or looking to move to it. What are Dependency Properties? XAML provides a great way to define layout controls, user input controls, shapes, colors and data binding expressions in a declarative manner. There’s a lot that goes on behind the scenes in order to make XAML work and an important part of that magic is the use of dependency properties. If you want to bind data to a property, style it, animate it or transform it in XAML then the property involved has to be a dependency property to work properly. If you’ve ever positioned a control in a Canvas using Canvas.Left or placed a control in a specific Grid row using Grid.Row then you’ve used an attached property which is a specialized type of dependency property. Dependency properties play a key role in XAML and the overall Silverlight framework. Any property that you bind, style, template, animate or transform must be a dependency property in Silverlight applications. You can programmatically bind values to controls and work with standard CLR properties, but if you want to use the built-in binding expressions available in XAML (one of my favorite features) or the Binding class available through code then dependency properties are a necessity. Dependency properties aren’t needed in every situation, but if you want to customize your application very much you’ll eventually end up needing them. For example, if you create a custom user control and want to expose a property that consumers can use to change the background color, you have to define it as a dependency property if you want bindings, styles and other features to be available for use. Now that the overall purpose of dependency properties has been discussed let’s take a look at how you can create them. Creating Dependency Properties When .NET first came out you had to write backing fields for each property that you defined as shown next: Brush _ScheduleBackground; public Brush ScheduleBackground { get { return _ScheduleBackground; } set { _ScheduleBackground = value; } } Although .NET 2.0 added auto-implemented properties (for example: public Brush ScheduleBackground { get; set; }) where the compiler would automatically generate the backing field used by get and set blocks, the concept is still the same as shown in the above code; a property acts as a wrapper around a field. Silverlight dependency properties replace the _ScheduleBackground field shown in the previous code and act as the backing store for a standard CLR property. The following code shows an example of defining a dependency property named ScheduleBackgroundProperty: public static readonly DependencyProperty ScheduleBackgroundProperty = DependencyProperty.Register("ScheduleBackground", typeof(Brush), typeof(Scheduler), null); Looking through the code the first thing that may stand out is that the definition for ScheduleBackgroundProperty is marked as static and readonly and that the property appears to be of type DependencyProperty. This is a standard pattern that you’ll use when working with dependency properties. You’ll also notice that the property explicitly adds the word “Property” to the name which is another standard you’ll see followed. In addition to defining the property, the code also makes a call to the static DependencyProperty.Register method and passes the name of the property to register (ScheduleBackground in this case) as a string. The type of the property, the type of the class that owns the property and a null value (more on the null value later) are also passed. In this example a class named Scheduler acts as the owner. The code handles registering the property as a dependency property with the call to Register(), but there’s a little more work that has to be done to allow a value to be assigned to and retrieved from the dependency property. The following code shows the complete code that you’ll typically use when creating a dependency property. You can find code snippets that greatly simplify the process of creating dependency properties out on the web. The MVVM Light download available from http://mvvmlight.codeplex.com comes with built-in dependency properties snippets as well. public static readonly DependencyProperty ScheduleBackgroundProperty = DependencyProperty.Register("ScheduleBackground", typeof(Brush), typeof(Scheduler), null); public Brush ScheduleBackground { get { return (Brush)GetValue(ScheduleBackgroundProperty); } set { SetValue(ScheduleBackgroundProperty, value); } } The standard CLR property code shown above should look familiar since it simply wraps the dependency property. However, you’ll notice that the get and set blocks call GetValue and SetValue methods respectively to perform the appropriate operation on the dependency property. GetValue and SetValue are members of the DependencyObject class which is another key component of the Silverlight framework. Silverlight controls and classes (TextBox, UserControl, CompositeTransform, DataGrid, etc.) ultimately derive from DependencyObject in their inheritance hierarchy so that they can support dependency properties. Dependency properties defined in Silverlight controls and other classes tend to follow the pattern of registering the property by calling Register() and then wrapping the dependency property in a standard CLR property (as shown above). They have a standard property that wraps a registered dependency property and allows a value to be assigned and retrieved. If you need to expose a new property on a custom control that supports data binding expressions in XAML then you’ll follow this same pattern. Dependency properties are extremely useful once you understand why they’re needed and how they’re defined. Detecting Changes and Setting Defaults When working with dependency properties there will be times when you want to assign a default value or detect when a property changes so that you can keep the user interface in-sync with the property value. Silverlight’s DependencyProperty.Register() method provides a fourth parameter that accepts a PropertyMetadata object instance. PropertyMetadata can be used to hook a callback method to a dependency property. The callback method is called when the property value changes. PropertyMetadata can also be used to assign a default value to the dependency property. By assigning a value of null for the final parameter passed to Register() you’re telling the property that you don’t care about any changes and don’t have a default value to apply. Here are the different constructor overloads available on the PropertyMetadata class: PropertyMetadata Constructor Overload Description PropertyMetadata(Object) Used to assign a default value to a dependency property. PropertyMetadata(PropertyChangedCallback) Used to assign a property changed callback method. PropertyMetadata(Object, PropertyChangedCalback) Used to assign a default property value and a property changed callback. There are many situations where you need to know when a dependency property changes or where you want to apply a default. Performing either task is easily accomplished by creating a new instance of the PropertyMetadata class and passing the appropriate values to its constructor. The following code shows an enhanced version of the initial dependency property code shown earlier that demonstrates these concepts: public Brush ScheduleBackground { get { return (Brush)GetValue(ScheduleBackgroundProperty); } set { SetValue(ScheduleBackgroundProperty, value); } } public static readonly DependencyProperty ScheduleBackgroundProperty = DependencyProperty.Register("ScheduleBackground", typeof(Brush), typeof(Scheduler), new PropertyMetadata(new SolidColorBrush(Colors.LightGray), ScheduleBackgroundChanged)); private static void ScheduleBackgroundChanged(DependencyObject d, DependencyPropertyChangedEventArgs e) { var scheduler = d as Scheduler; scheduler.Background = e.NewValue as Brush; } The code wires ScheduleBackgroundProperty to a property change callback method named ScheduleBackgroundChanged. What’s interesting is that this callback method is static (as is the dependency property) so it gets passed the instance of the object that owns the property that has changed (otherwise we wouldn’t be able to get to the object instance). In this example the dependency object is cast to a Scheduler object and its Background property is assigned to the new value of the dependency property. The code also handles assigning a default value of LightGray to the dependency property by creating a new instance of a SolidColorBrush. To Sum Up In this post you’ve seen the role of dependency properties and how they can be defined in code. They play a big role in XAML and the overall Silverlight framework. You can think of dependency properties as being replacements for fields that you’d normally use with standard CLR properties. In addition to a discussion on how dependency properties are created, you also saw how to use the PropertyMetadata class to define default dependency property values and hook a dependency property to a callback method. The most important thing to understand with dependency properties (especially if you’re new to Silverlight) is that they’re needed if you want a property to support data binding, animations, transformations and styles properly. Any time you create a property on a custom control or user control that has these types of requirements you’ll want to pick a dependency property over of a standard CLR property with a backing field. There’s more that can be covered with dependency properties including a related property called an attached property….more to come.

Read the article

Entity Framework v1 – tips and Tricks Part 3

- by Rohit Gupta

General Tips on Entity Framework v1 & Linq to Entities: ToTraceString() If you need to know the underlying SQL that the EF generates for a Linq To Entities query, then use the ToTraceString() method of the ObjectQuery class. (or use LINQPAD) Note that you need to cast the LINQToEntities query to ObjectQuery before calling TotraceString() as follows: 1: string efSQL = ((ObjectQuery)from c in ctx.Contact 2: where c.Address.Any(a => a.CountryRegion == "US") 3: select c.ContactID).ToTraceString(); ================================================================================ MARS or MultipleActiveResultSet When you create a EDM Model (EDMX file) from the database using Visual Studio, it generates a connection string with the same name as the name of the EntityContainer in CSDL. In the ConnectionString so generated it sets the MultipleActiveResultSet attribute to true by default. So if you are running the following query then it streams multiple readers over the same connection: 1: using (BAEntities context = new BAEntities()) 2: { 3: var cons = 4: from con in context.Contacts 5: where con.FirstName == "Jose" 6: select con; 7: foreach (var c in cons) 8: { 9: if (c.AddDate < new System.DateTime(2007, 1, 1)) 10: { 11: c.Addresses.Load(); 12: } 13: } 14: } ================================================================================= Explicitly opening and closing EntityConnection When you call ToList() or foreach on a LINQToEntities query the EF automatically closes the connection after all the records from the query have been consumed. Thus if you need to run many LINQToEntities queries over the same connection then explicitly open and close the connection as follows: 1: using (BAEntities context = new BAEntities()) 2: { 3: context.Connection.Open(); 4: var cons = from con in context.Contacts where con.FirstName == "Jose" 5: select con; 6: var conList = cons.ToList(); 7: var allCustomers = from con in context.Contacts.OfType<Customer>() 8: select con; 9: var allcustList = allCustomers.ToList(); 10: context.Connection.Close(); 11: } ====================================================================== Dispose ObjectContext only if required After you retrieve entities using the ObjectContext and you are not explicitly disposing the ObjectContext then insure that your code does consume all the records from the LinqToEntities query by calling .ToList() or foreach statement, otherwise the the database connection will remain open and will be closed by the garbage collector when it gets to dispose the ObjectContext. Secondly if you are making updates to the entities retrieved using LinqToEntities then insure that you dont inadverdently dispose of the ObjectContext after the entities are retrieved and before calling .SaveChanges() since you need the SAME ObjectContext to keep track of changes made to the Entities (by using ObjectStateEntry objects). So if you do need to explicitly dispose of the ObjectContext do so only after calling SaveChanges() and only if you dont need to change track the entities retrieved any further. ======================================================================= SQL InjectionAttacks under control with EFv1 LinqToEntities and LinqToSQL queries are parameterized before they are sent to the DB hence they are not vulnerable to SQL Injection attacks. EntitySQL may be slightly vulnerable to attacks since it does not use parameterized queries. However since the EntitySQL demands that the query be valid Entity SQL syntax and valid native SQL syntax at the same time. So the only way one can do a SQLInjection Attack is by knowing the SSDL of the EDM Model and be able to write the correct EntitySQL (note one cannot append regular SQL since then the query wont be a valid EntitySQL syntax) and append it to a parameter. ====================================================================== Improving Performance You can convert the EntitySets and AssociationSets in a EDM Model into precompiled Views using the edmgen utility. for e.g. the Customer Entity can be converted into a precompiled view using edmgen and all LinqToEntities query against the contaxt.Customer EntitySet will use the precompiled View instead of the EntitySet itself (the same being true for relationships (EntityReference & EntityCollections of a Entity)). The advantage being that when using precompiled views the performance will be much better. The syntax for generating precompiled views for a existing EF project is : edmgen /mode:ViewGeneration /inssdl:BAModel.ssdl /incsdl:BAModel.csdl /inmsl:BAModel.msl /p:Chap14.csproj Note that this will only generate precompiled views for EntitySets and Associations and not for existing LinqToEntities queries in the project.(for that use CompiledQuery.Compile<>) Secondly if you have a LinqToEntities query that you need to run multiple times, then one should precompile the query using CompiledQuery.Compile method. The CompiledQuery.Compile<> method accepts a lamda expression as a parameter, which denotes the LinqToEntities query that you need to precompile. The following is a example of a lamda that we can pass into the CompiledQuery.Compile() method 1: Expression<Func<BAEntities, string, IQueryable<Customer>>> expr = (BAEntities ctx1, string loc) => 2: from c in ctx1.Contacts.OfType<Customer>() 3: where c.Reservations.Any(r => r.Trip.Destination.DestinationName == loc) 4: select c; Then we call the Compile Query as follows: 1: var query = CompiledQuery.Compile<BAEntities, string, IQueryable<Customer>>(expr); 2: 3: using (BAEntities ctx = new BAEntities()) 4: { 5: var loc = "Malta"; 6: IQueryable<Customer> custs = query.Invoke(ctx, loc); 7: var custlist = custs.ToList(); 8: foreach (var item in custlist) 9: { 10: Console.WriteLine(item.FullName); 11: } 12: } Note that if you created a ObjectQuery or a Enitity SQL query instead of the LINQToEntities query, you dont need precompilation for e.g. 1: An Example of EntitySQL query : 2: string esql = "SELECT VALUE c from Contacts AS c where c is of(BAGA.Customer) and c.LastName = 'Gupta'"; 3: ObjectQuery<Customer> custs = CreateQuery<Customer>(esql); 1: An Example of ObjectQuery built using ObjectBuilder methods: 2: from c in Contacts.OfType<Customer>().Where("it.LastName == 'Gupta'") 3: select c This is since the Query plan is cached and thus the performance improves a bit, however since the ObjectQuery or EntitySQL query still needs to materialize the results into Entities hence it will take the same amount of performance hit as with LinqToEntities. However note that not ALL EntitySQL based or QueryBuilder based ObjectQuery plans are cached. So if you are in doubt always create a LinqToEntities compiled query and use that instead ============================================================ GetObjectStateEntry Versus GetObjectByKey We can get to the Entity being referenced by the ObjectStateEntry via its Entity property and there are helper methods in the ObjectStateManager (osm.TryGetObjectStateEntry) to get the ObjectStateEntry for a entity (for which we know the EntityKey). Similarly The ObjectContext has helper methods to get an Entity i.e. TryGetObjectByKey(). TryGetObjectByKey() uses GetObjectStateEntry method under the covers to find the object, however One important difference between these 2 methods is that TryGetObjectByKey queries the database if it is unable to find the object in the context, whereas TryGetObjectStateEntry only looks in the context for existing entries. It will not make a trip to the database ============================================================= POCO objects with EFv1: To create POCO objects that can be used with EFv1. We need to implement 3 key interfaces: IEntityWithKey IEntityWithRelationships IEntityWithChangeTracker Implementing IEntityWithKey is not mandatory, but if you dont then we need to explicitly provide values for the EntityKey for various functions (for e.g. the functions needed to implement IEntityWithChangeTracker and IEntityWithRelationships). Implementation of IEntityWithKey involves exposing a property named EntityKey which returns a EntityKey object. Implementation of IEntityWithChangeTracker involves implementing a method named SetChangeTracker since there can be multiple changetrackers (Object Contexts) existing in memory at the same time. 1: public void SetChangeTracker(IEntityChangeTracker changeTracker) 2: { 3: _changeTracker = changeTracker; 4: } Additionally each property in the POCO object needs to notify the changetracker (objContext) that it is updating itself by calling the EntityMemberChanged and EntityMemberChanging methods on the changeTracker. for e.g.: 1: public EntityKey EntityKey 2: { 3: get { return _entityKey; } 4: set 5: { 6: if (_changeTracker != null) 7: { 8: _changeTracker.EntityMemberChanging("EntityKey"); 9: _entityKey = value; 10: _changeTracker.EntityMemberChanged("EntityKey"); 11: } 12: else 13: _entityKey = value; 14: } 15: } 16: ===================== Custom Property ==================================== 17: 18: [EdmScalarPropertyAttribute(IsNullable = false)] 19: public System.DateTime OrderDate 20: { 21: get { return _orderDate; } 22: set 23: { 24: if (_changeTracker != null) 25: { 26: _changeTracker.EntityMemberChanging("OrderDate"); 27: _orderDate = value; 28: _changeTracker.EntityMemberChanged("OrderDate"); 29: } 30: else 31: _orderDate = value; 32: } 33: } Finally you also need to create the EntityState property as follows: 1: public EntityState EntityState 2: { 3: get { return _changeTracker.EntityState; } 4: } The IEntityWithRelationships involves creating a property that returns RelationshipManager object: 1: public RelationshipManager RelationshipManager 2: { 3: get 4: { 5: if (_relManager == null) 6: _relManager = RelationshipManager.Create(this); 7: return _relManager; 8: } 9: } ============================================================ Tip : ProviderManifestToken – change EDMX File to use SQL 2008 instead of SQL 2005 To use with SQL Server 2008, edit the EDMX file (the raw XML) changing the ProviderManifestToken in the SSDL attributes from "2005" to "2008" ============================================================= With EFv1 we cannot use Structs to replace a anonymous Type while doing projections in a LINQ to Entities query. While the same is supported with LINQToSQL, it is not with LinqToEntities. For e.g. the following is not supported with LinqToEntities since only parameterless constructors and initializers are supported in LINQ to Entities. (the same works with LINQToSQL) 1: public struct CompanyInfo 2: { 3: public int ID { get; set; } 4: public string Name { get; set; } 5: } 6: var companies = (from c in dc.Companies 7: where c.CompanyIcon == null 8: select new CompanyInfo { Name = c.CompanyName, ID = c.CompanyId }).ToList(); ;

Read the article

Globally Handling Request Validation In ASP.NET MVC

- by imran_ku07

Introduction: Cross Site Scripting(XSS) and Cross-Site Request Forgery (CSRF) attacks are one of dangerous attacks on web. They are among the most famous security issues affecting web applications. OWASP regards XSS is the number one security issue on the Web. Both ASP.NET Web Forms and ASP.NET MVC paid very much attention to make applications build with ASP.NET as secure as possible. So by default they will throw an exception 'A potentially dangerous XXX value was detected from the client', when they see, < followed by an exclamation(like <!) or < followed by the letters a through z(like <s) or & followed by a pound sign(like &#123) as a part of querystring, posted form and cookie collection. This is good for lot of applications. But this is not always the case. Many applications need to allow users to enter html tags, for example applications which uses Rich Text Editor. You can allow user to enter these tags by just setting validateRequest="false" in your Web.config application configuration file inside <pages> element if you are using Web Form. This will globally disable request validation. But in ASP.NET MVC request handling is different than ASP.NET Web Form. Therefore for disabling request validation globally in ASP.NET MVC you have to put ValidateInputAttribute in your every controller. This become pain full for you if you have hundred of controllers. Therefore in this article i will present a very simple way to handle request validation globally through web.config. Description: Before starting how to do this it is worth to see why validateRequest in Page directive and web.config not work in ASP.NET MVC. Actually request handling in ASP.NET Web Form and ASP.NET MVC is different. In Web Form mostly the HttpHandler is the page handler which checks the posted form, query string and cookie collection during the Page ProcessRequest method, while in MVC request validation occur when ActionInvoker calling the action. Just see the stack trace of both framework. ASP.NET MVC Stack Trace: System.Web.HttpRequest.ValidateString(String s, String valueName, String collectionName) +8723114 System.Web.HttpRequest.ValidateNameValueCollection(NameValueCollection nvc, String collectionName) +111 System.Web.HttpRequest.get_Form() +129 System.Web.HttpRequestWrapper.get_Form() +11 System.Web.Mvc.ValueProviderDictionary.PopulateDictionary() +145 System.Web.Mvc.ValueProviderDictionary..ctor(ControllerContext controllerContext) +74 System.Web.Mvc.ControllerBase.get_ValueProvider() +31 System.Web.Mvc.ControllerActionInvoker.GetParameterValue(ControllerContext controllerContext, ParameterDescriptor parameterDescriptor) +53 System.Web.Mvc.ControllerActionInvoker.GetParameterValues(ControllerContext controllerContext, ActionDescriptor actionDescriptor) +109 System.Web.Mvc.ControllerActionInvoker.InvokeAction(ControllerContext controllerContext, String actionName) +399 System.Web.Mvc.Controller.ExecuteCore() +126 System.Web.Mvc.ControllerBase.Execute(RequestContext requestContext) +27 ASP.NET Web Form Stack Trace: System.Web.HttpRequest.ValidateString(String s, String valueName, String collectionName) +3213202 System.Web.HttpRequest.ValidateNameValueCollection(NameValueCollection nvc, String collectionName) +108 System.Web.HttpRequest.get_QueryString() +119 System.Web.UI.Page.GetCollectionBasedOnMethod(Boolean dontReturnNull) +2022776 System.Web.UI.Page.DeterminePostBackMode() +60 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +6953 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +154 System.Web.UI.Page.ProcessRequest() +86 Since the first responder of request in ASP.NET MVC is the controller action therefore it will check the posted values during calling the action. That's why web.config's requestValidate not work in ASP.NET MVC. So let's see how to handle this globally in ASP.NET MVC. First of all you need to add an appSettings in web.config. <appSettings> <add key="validateRequest" value="true"/> </appSettings> I am using the same key used in disable request validation in Web Form. Next just create a new ControllerFactory by derving the class from DefaultControllerFactory. public class MyAppControllerFactory : DefaultControllerFactory { protected override IController GetControllerInstance(Type controllerType) { var controller = base.GetControllerInstance(controllerType); string validateRequest=System.Configuration.ConfigurationManager.AppSettings["validateRequest"]; bool b; if (validateRequest != null && bool.TryParse(validateRequest,out b)) ((ControllerBase)controller).ValidateRequest = bool.Parse(validateRequest); return controller; } } Next just register your controller factory in global.asax. protected void Application_Start() { //............................................................................................ ControllerBuilder.Current.SetControllerFactory(new MyAppControllerFactory()); } This will prevent the above exception to occur in the context of ASP.NET MVC. But if you are using the Default WebFormViewEngine then you need also to set validateRequest="false" in your web.config file inside <pages> element Now when you run your application you see the effect of validateRequest appsetting. One thing also note that the ValidateInputAttribute placed inside action or controller will always override this setting. Summary: Request validation is great security feature in ASP.NET but some times there is a need to disable this entirely. So in this article i just showed you how to disable this globally in ASP.NET MVC. I also explained the difference between request validation in Web Form and ASP.NET MVC. Hopefully you will enjoy this.

Read the article

Anti-Forgery Request Helpers for ASP.NET MVC and jQuery AJAX

- by Dixin

Background To secure websites from cross-site request forgery (CSRF, or XSRF) attack, ASP.NET MVC provides an excellent mechanism: The server prints tokens to cookie and inside the form; When the form is submitted to server, token in cookie and token inside the form are sent in the HTTP request; Server validates the tokens. To print tokens to browser, just invoke HtmlHelper.AntiForgeryToken():<% using (Html.BeginForm()) { %> <%: this.Html.AntiForgeryToken(Constants.AntiForgeryTokenSalt)%> <%-- Other fields. --%> <input type="submit" value="Submit" /> <% } %> This invocation generates a token then writes inside the form:<form action="..." method="post"> <input name="__RequestVerificationToken" type="hidden" value="J56khgCvbE3bVcsCSZkNVuH9Cclm9SSIT/ywruFsXEgmV8CL2eW5C/gGsQUf/YuP" />  <input type="submit" value="Submit" /> </form> and also writes into the cookie: __RequestVerificationToken_Lw__= J56khgCvbE3bVcsCSZkNVuH9Cclm9SSIT/ywruFsXEgmV8CL2eW5C/gGsQUf/YuP When the above form is submitted, they are both sent to server. In the server side, [ValidateAntiForgeryToken] attribute is used to specify the controllers or actions to validate them:[HttpPost] [ValidateAntiForgeryToken(Salt = Constants.AntiForgeryTokenSalt)] public ActionResult Action(/* ... */) { // ... } This is very productive for form scenarios. But recently, when resolving security vulnerabilities for Web products, some problems are encountered. Specify validation on controller (not on each action) The server side problem is, It is expected to declare [ValidateAntiForgeryToken] on controller, but actually it has be to declared on each POST actions. Because POST actions are usually much more then controllers, this is a little crazy Problem Usually a controller contains actions for HTTP GET and actions for HTTP POST requests, and usually validations are expected for HTTP POST requests. So, if the [ValidateAntiForgeryToken] is declared on the controller, the HTTP GET requests become invalid:[ValidateAntiForgeryToken(Salt = Constants.AntiForgeryTokenSalt)] public class SomeController : Controller // One [ValidateAntiForgeryToken] attribute. { [HttpGet] public ActionResult Index() // Index() cannot work. { // ... } [HttpPost] public ActionResult PostAction1(/* ... */) { // ... } [HttpPost] public ActionResult PostAction2(/* ... */) { // ... } // ... } If browser sends an HTTP GET request by clicking a link: http://Site/Some/Index, validation definitely fails, because no token is provided. So the result is, [ValidateAntiForgeryToken] attribute must be distributed to each POST action:public class SomeController : Controller // Many [ValidateAntiForgeryToken] attributes. { [HttpGet] public ActionResult Index() // Works. { // ... } [HttpPost] [ValidateAntiForgeryToken(Salt = Constants.AntiForgeryTokenSalt)] public ActionResult PostAction1(/* ... */) { // ... } [HttpPost] [ValidateAntiForgeryToken(Salt = Constants.AntiForgeryTokenSalt)] public ActionResult PostAction2(/* ... */) { // ... } // ... } This is a little bit crazy, because one application can have a lot of POST actions. Solution To avoid a large number of [ValidateAntiForgeryToken] attributes (one for each POST action), the following ValidateAntiForgeryTokenAttribute wrapper class can be helpful, where HTTP verbs can be specified:[AttributeUsage(AttributeTargets.Class | AttributeTargets.Method, AllowMultiple = false, Inherited = true)] public class ValidateAntiForgeryTokenWrapperAttribute : FilterAttribute, IAuthorizationFilter { private readonly ValidateAntiForgeryTokenAttribute _validator; private readonly AcceptVerbsAttribute _verbs; public ValidateAntiForgeryTokenWrapperAttribute(HttpVerbs verbs) : this(verbs, null) { } public ValidateAntiForgeryTokenWrapperAttribute(HttpVerbs verbs, string salt) { this._verbs = new AcceptVerbsAttribute(verbs); this._validator = new ValidateAntiForgeryTokenAttribute() { Salt = salt }; } public void OnAuthorization(AuthorizationContext filterContext) { string httpMethodOverride = filterContext.HttpContext.Request.GetHttpMethodOverride(); if (this._verbs.Verbs.Contains(httpMethodOverride, StringComparer.OrdinalIgnoreCase)) { this._validator.OnAuthorization(filterContext); } } } When this attribute is declared on controller, only HTTP requests with the specified verbs are validated:[ValidateAntiForgeryTokenWrapper(HttpVerbs.Post, Constants.AntiForgeryTokenSalt)] public class SomeController : Controller { // GET actions are not affected. // Only HTTP POST requests are validated. } Now one single attribute on controller turns on validation for all POST actions. Maybe it would be nice if HTTP verbs can be specified on the built-in [ValidateAntiForgeryToken] attribute, which is easy to implemented. Submit token via AJAX The browser side problem is, if server side turns on anti-forgery validation for POST, then AJAX POST requests will fail be default. Problem For AJAX scenarios, when request is sent by jQuery instead of form:$.post(url, { productName: "Tofu", categoryId: 1 // Token is not posted. }, callback); This kind of AJAX POST requests will always be invalid, because server side code cannot see the token in the posted data. Solution The tokens are printed to browser then sent back to server. So first of all, HtmlHelper.AntiForgeryToken() must be called somewhere. Now the browser has token in HTML and cookie. Then jQuery must find the printed token in the HTML, and append token to the data before sending:$.post(url, { productName: "Tofu", categoryId: 1, __RequestVerificationToken: getToken() // Token is posted. }, callback); To be reusable, this can be encapsulated into a tiny jQuery plugin:/// <reference path="jquery-1.4.2.js" /> (function ($) { $.getAntiForgeryToken = function (tokenWindow, appPath) { // HtmlHelper.AntiForgeryToken() must be invoked to print the token. tokenWindow = tokenWindow && typeof tokenWindow === typeof window ? tokenWindow : window; appPath = appPath && typeof appPath === "string" ? "_" + appPath.toString() : ""; // The name attribute is either __RequestVerificationToken, // or __RequestVerificationToken_{appPath}. tokenName = "__RequestVerificationToken" + appPath; // Finds the <input type="hidden" name={tokenName} value="..." /> from the specified. // var inputElements = $("input[type='hidden'][name='__RequestVerificationToken" + appPath + "']"); var inputElements = tokenWindow.document.getElementsByTagName("input"); for (var i = 0; i < inputElements.length; i++) { var inputElement = inputElements[i]; if (inputElement.type === "hidden" && inputElement.name === tokenName) { return { name: tokenName, value: inputElement.value }; } } return null; }; $.appendAntiForgeryToken = function (data, token) { // Converts data if not already a string. if (data && typeof data !== "string") { data = $.param(data); } // Gets token from current window by default. token = token ? token : $.getAntiForgeryToken(); // $.getAntiForgeryToken(window). data = data ? data + "&" : ""; // If token exists, appends {token.name}={token.value} to data. return token ? data + encodeURIComponent(token.name) + "=" + encodeURIComponent(token.value) : data; }; // Wraps $.post(url, data, callback, type). $.postAntiForgery = function (url, data, callback, type) { return $.post(url, $.appendAntiForgeryToken(data), callback, type); }; // Wraps $.ajax(settings). $.ajaxAntiForgery = function (settings) { settings.data = $.appendAntiForgeryToken(settings.data); return $.ajax(settings); }; })(jQuery); In most of the scenarios, it is Ok to just replace $.post() invocation with $.postAntiForgery(), and replace $.ajax() with $.ajaxAntiForgery():$.postAntiForgery(url, { productName: "Tofu", categoryId: 1 }, callback); // Token is posted. There might be some scenarios of custom token. Here $.appendAntiForgeryToken() is provided:data = $.appendAntiForgeryToken(data, token); // Token is already in data. No need to invoke $.postAntiForgery(). $.post(url, data, callback); And there are scenarios that the token is not in the current window. For example, an HTTP POST request can be sent by iframe, while the token is in the parent window. Here window can be specified for $.getAntiForgeryToken():data = $.appendAntiForgeryToken(data, $.getAntiForgeryToken(window.parent)); // Token is already in data. No need to invoke $.postAntiForgery(). $.post(url, data, callback); If you have better solution, please do tell me.

Read the article

Using Unity – Part 6

- by nmarun

This is the last of the ‘Unity’ series and I’ll be talking about generics here. If you’ve been following the previous articles, you must have noticed that I’m just adding more and more ‘Product’ classes to the project. I’ll change that trend in this blog where I’ll be adding an ICaller interface and a Caller class. 1: public interface ICaller<T> where T : IProduct 2: { 3: string CallMethod<T>(string typeName); 4: } 5: 6: public class Caller<T> : ICaller<T> where T:IProduct 7: { 8: public string CallMethod<T>(string typeName) 9: { 10: //... 11: } 12: } We’ll fill-in the implementation of the CallMethod in a few, but first, here’s what we’re going to do: create an instance of the Caller class pass it the IProduct as a generic parameter in the CallMethod method, we’ll use Unity to dynamically create an instance of IProduct implemented object I need to add the config information for ICaller and Caller types. 1: <typeAlias alias="ICaller`1" type="ProductModel.ICaller`1, ProductModel" /> 2: <typeAlias alias="Caller`1" type="ProductModel.Caller`1, ProductModel" /> The .NET Framework’s convention to express generic types is ICaller`1, where the digit following the "`" matches the number of types contained in the generic type. So a generic type that contains 4 types contained in the generic type would be declared as: 1: <typeAlias alias="Caller`4" type="ProductModel.Caller`4, ProductModel" /> On my .aspx page, I have the following UI design: 1: <asp:RadioButton ID="LegacyProduct" Text="Product" runat="server" GroupName="ProductWeb" 2: AutoPostBack="true" OnCheckedChanged="RadioButton_CheckedChanged" /> 3: <br /> 4: <asp:RadioButton ID="NewProduct" Text="Product 2" runat="server" GroupName="ProductWeb" 5: AutoPostBack="true" OnCheckedChanged="RadioButton_CheckedChanged" /> 6: <br /> 7: <asp:RadioButton ID="ComplexProduct" Text="Product 3" runat="server" GroupName="ProductWeb" 8: AutoPostBack="true" OnCheckedChanged="RadioButton_CheckedChanged" /> 9: <br /> 10: <asp:RadioButton ID="ArrayConstructor" Text="Product 4" runat="server" GroupName="ProductWeb" 11: AutoPostBack="true" OnCheckedChanged="RadioButton_CheckedChanged" /> Things to note here are that all these radio buttons belong to the same GroupName => only one of these four can be clicked. Next, all four controls postback to the same ‘OnCheckedChanged’ event and lastly the ID’s point to named types of IProduct (already added to the web.config file). 1: <type type="IProduct" mapTo="Product" name="LegacyProduct" /> 2: 3: <type type="IProduct" mapTo="Product2" name="NewProduct" /> 4: 5: <type type="IProduct" mapTo="Product3" name="ComplexProduct"> 6: ... 7: </type> 8: 9: <type type="IProduct" mapTo="Product4" name="ArrayConstructor"> 10: ... 11: </type> In my calling code, I see which radio button was clicked, pass that as an argument to the CallMethod method. 1: protected void RadioButton_CheckedChanged(object sender, EventArgs e) 2: { 3: string typeName = ((RadioButton)sender).ID; 4: ICaller<IProduct> caller = unityContainer.Resolve<ICaller<IProduct>>(); 5: productDetailsLabel.Text = caller.CallMethod<IProduct>(typeName); 6: } What’s basically happening here is that the ID of the control gets passed on to the typeName which will be one of “LegacyProduct”, “NewProduct”, “ComplexProduct” or “ArrayConstructor”. I then create an instance of an ICaller and pass the typeName to it. Now, we’ll fill in the blank for the CallMethod method (sorry for the naming guys). 1: public string CallMethod<T>(string typeName) 2: { 3: IUnityContainer unityContainer = HttpContext.Current.Application["UnityContainer"] as IUnityContainer; 4: T productInstance = unityContainer.Resolve<T>(typeName); 5: return ((IProduct)productInstance).WriteProductDetails(); 6: } This is where I’ll resolve the IProduct by passing the type name and calling the WriteProductDetails() method. With all things in place, when I run the application and choose different radio buttons, the output should look something like below: Basically this is how generics come to play in Unity. Please see the code I’ve used for this here. This marks the end of the ‘Unity’ series. I’ll definitely post any updates that I find, but for now I don’t have anything planned.

Read the article

Using ExcelPacke to create Excel sheets on server

- by DigiMortal

In one of my community projects I needed to output some listings as Excel file. As installing Excel to server is non-sense that I was easily able to avoid I found simple solution for Excel 2007 files – open-source project called ExcelPackage. In this posting I will show you hot to create simple event attendees report in Excel 2007 format using ExcelPackage. Cautions Although ExcelPackage works well for me here are some things you should be aware of. ExcelPackage needs file system access because compression library it uses is designed so. There is only very old source code available and it is published under GPL. So if you are writing application to your customers then you cannot use this library unless you make your whole application open-source. ExcelPackage has also some technical problems and it is not very easy to use in simple cases. Authors have not provided any new releases since the beginning of 2007 so I have good reason to consider this project as abandoned. You may find the extensive package EPPlus also useful as there are new versions coming over time. EPPlus is also published under GPL (because ExcelPackage is under GPL), so you can use it only on very limited manner. If you don’t afraid some s*itfight with technology and GPL is okay for your system then let’s go on. Exporting event attendees list to Excel Suppose we have list with event attendees and we want to export it to Excel. We are behaving normally and we don’t install Excel desktop software to our web server. Here is the code. void ExportToExcel(Event evt) { var fileInfo = new FileInfo(Path.GetTempPath() + "\\" + DateTime.Now.Ticks + ".xlsx"); using (var xls = new ExcelPackage(fileInfo)) { var sheet = xls.Workbook.Worksheets.Add(evt.Title); sheet.Cell(1, 1).Value = "First name"; sheet.Cell(1, 2).Value = "Last name"; sheet.Cell(1, 3).Value = "E-mail"; sheet.Cell(1, 4).Value = "Phone"; sheet.Cell(1, 5).Value = "Registered"; sheet.Cell(1, 6).Value = "Live Meeting"; var i = 1; foreach(var attendee in evt.Attendees) { i++; var profile = attendee.Profile; sheet.Cell(i, 1).Value = profile.FirstName; sheet.Cell(i, 2).Value = profile.LastName; sheet.Cell(i, 3).Value = profile.Email; sheet.Cell(i, 4).Value = profile.Phone; sheet.Cell(i, 5).Value = att.Created.ToString(); sheet.Cell(i, 6).Value = att.LiveMeeting.ToString(); } xls.Save(); } Response.Clear(); Response.ContentType = "application/vnd.openxmlformats"; Response.AddHeader("Content-Disposition", "attachment; filename=" + fileInfo.Name); Response.WriteFile(fileInfo.FullName); Response.Flush(); if (fileInfo.Exists) fileInfo.Delete(); } And here is the result. Although it is possible to make this list more effective and nice it works and users can start using it until all the nice bells and whistles are coming. Conclusion After some fighting with technology it was not very hard to get nice Excel 2007 sheets coming out from our server. We used ExcelPackage library to create list of event attendees and our event organizers can now simply download data to Excel if they need to contact with attendees or manage their data using Excel tools.

Read the article

WCF – interchangeable data-contract types

- by nmarun

In a WSDL based environment, unlike a CLR-world, we pass around the ‘state’ of an object and not the reference of an object. Well firstly, what does ‘state’ mean and does this also mean that we can send a struct where a class is expected (or vice-versa) as long as their ‘state’ is one and the same? Let’s see. So I have an operation contract defined as below: 1: [ServiceContract] 2: public interface ILearnWcfServiceExtend : ILearnWcfService 3: { 4: [OperationContract] 5: Employee SaveEmployee(Employee employee); 6: } 7: 8: [ServiceBehavior] 9: public class LearnWcfService : ILearnWcfServiceExtend 10: { 11: public Employee SaveEmployee(Employee employee) 12: { 13: employee.EmployeeId = 123; 14: return employee; 15: } 16: } Quite simplistic operation there (which translates to ‘absolutely no business value’). Now, the data contract Employee mentioned above is a struct. 1: public struct Employee 2: { 3: public int EmployeeId { get; set; } 4: 5: public string FName { get; set; } 6: } After compilation and consumption of this service, my proxy (in the Reference.cs file) looks like below (I’ve ignored the rest of the details just to avoid unwanted confusion): 1: public partial struct Employee : System.Runtime.Serialization.IExtensibleDataObject, System.ComponentModel.INotifyPropertyChanged I call the service with the code below: 1: private static void CallWcfService() 2: { 3: Employee employee = new Employee { FName = "A" }; 4: Console.WriteLine("IsValueType: {0}", employee.GetType().IsValueType); 5: Console.WriteLine("IsClass: {0}", employee.GetType().IsClass); 6: Console.WriteLine("Before calling the service: {0} - {1}", employee.EmployeeId, employee.FName); 7: employee = LearnWcfServiceClient.SaveEmployee(employee); 8: Console.WriteLine("Return from the service: {0} - {1}", employee.EmployeeId, employee.FName); 9: } The output is: I now change my Employee type from a struct to a class in the proxy class and run the application: 1: public partial class Employee : System.Runtime.Serialization.IExtensibleDataObject, System.ComponentModel.INotifyPropertyChanged { The output this time is: The state of an object implies towards its composition, the properties and the values of these properties and not based on whether it is a reference type (class) or a value type (struct). And as shown above, we’re actually passing an object by its state and not by reference. Continuing on the same topic of ‘type-interchangeability’, WCF treats two data contracts as equivalent if they have the same ‘wire-representation’. We can do so using the DataContract and DataMember attributes’ Name property. 1: [DataContract] 2: public struct Person 3: { 4: [DataMember] 5: public int Id { get; set; } 6: 7: [DataMember] 8: public string FirstName { get; set; } 9: } 10: 11: [DataContract(Name="Person")] 12: public class Employee 13: { 14: [DataMember(Name = "Id")] 15: public int EmployeeId { get; set; } 16: 17: [DataMember(Name="FirstName")] 18: public string FName { get; set; } 19: } I’ve created two data contracts with the exact same wire-representation. Just remember that the names and the types of data members need to match to be considered equivalent. The question then arises as to what gets generated in the proxy class. Despite us declaring two data contracts (Person and Employee), only one gets emitted – Person. This is because we’re saying that the Employee type has the same wire-representation as the Person type. Also that the signature of the SaveEmployee operation gets changed on the proxy side: 1: [System.CodeDom.Compiler.GeneratedCodeAttribute("System.ServiceModel", "4.0.0.0")] 2: [System.ServiceModel.ServiceContractAttribute(ConfigurationName="ServiceProxy.ILearnWcfServiceExtend")] 3: public interface ILearnWcfServiceExtend 4: { 5: [System.ServiceModel.OperationContractAttribute(Action="http://tempuri.org/ILearnWcfServiceExtend/SaveEmployee", ReplyAction="http://tempuri.org/ILearnWcfServiceExtend/SaveEmployeeResponse")] 6: ClientApplication.ServiceProxy.Person SaveEmployee(ClientApplication.ServiceProxy.Person employee); 7: } But, on the service side, the SaveEmployee still accepts and returns an Employee data contract. 1: [ServiceBehavior] 2: public class LearnWcfService : ILearnWcfServiceExtend 3: { 4: public Employee SaveEmployee(Employee employee) 5: { 6: employee.EmployeeId = 123; 7: return employee; 8: } 9: } Despite all these changes, our output remains the same as the last one: This is type-interchangeability at work! Here’s one more thing to ponder about. Our Person type is a struct and Employee type is a class. Then how is it that the Person type got emitted as a ‘class’ in the proxy? It’s worth mentioning that WSDL describes a type called Employee and does not say whether it is a class or a struct (see the SOAP message below): 1: <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 2: xmlns:tem="http://tempuri.org/" 3: xmlns:ser="http://schemas.datacontract.org/2004/07/ServiceApplication"> 4: <soapenv:Header/> 5: <soapenv:Body> 6: <tem:SaveEmployee> 7:  8: <tem:employee> 9:  10: <ser:EmployeeId>?</ser:EmployeeId> 11:  12: <ser:FName>?</ser:FName> 13: </tem:employee> 14: </tem:SaveEmployee> 15: </soapenv:Body> 16: </soapenv:Envelope> There are some differences between how ‘Add Service Reference’ and the svcutil.exe generate the proxy class, but turns out both do some kind of reflection and determine the type of the data contract and emit the code accordingly. So since the Employee type is a class, the proxy ‘Person’ type gets generated as a class. In fact, reflecting on svcutil.exe application, you’ll see that there are a couple of places wherein a flag actually determines a type as a class or a struct. One example is in the ExportISerializableDataContract method in the System.Runtime.Serialization.CodeExporter class. Seems like these flags have a say in deciding whether the type gets emitted as a struct or a class. This behavior is different if you use the WSDL tool though. WSDL tool does not do any kind of reflection of the data contract / serialized type, it emits the type as a class by default. You can check this using the two command lines below: Note to self: Remember ‘state’ and type-interchangeability when traversing through the WSDL planet!

Read the article

RequestValidation Changes in ASP.NET 4.0

- by Rick Strahl

There’s been a change in the way the ValidateRequest attribute on WebForms works in ASP.NET 4.0. I noticed this today while updating a post on my WebLog all of which contain raw HTML and so all pretty much trigger request validation. I recently upgraded this app from ASP.NET 2.0 to 4.0 and it’s now failing to update posts. At first this was difficult to track down because of custom error handling in my app – the custom error handler traps the exception and logs it with only basic error information so the full detail of the error was initially hidden. After some more experimentation in development mode the error that occurs is the typical ASP.NET validate request error (‘A potentially dangerous Request.Form value was detetected…’) which looks like this in ASP.NET 4.0: At first when I got this I was real perplexed as I didn’t read the entire error message and because my page does have: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="NewEntry.aspx.cs" Inherits="Westwind.WebLog.NewEntry" MasterPageFile="~/App_Templates/Standard/AdminMaster.master" ValidateRequest="false" EnableEventValidation="false" EnableViewState="false" %> WTF? ValidateRequest would seem like it should be enough, but alas in ASP.NET 4.0 apparently that setting alone is no longer enough. Reading the fine print in the error explains that you need to explicitly set the requestValidationMode for the application back to V2.0 in web.config: <httpRuntime executionTimeout="300" requestValidationMode="2.0" /> Kudos for the ASP.NET team for putting up a nice error message that tells me how to fix this problem, but excuse me why the heck would you change this behavior to require an explicit override to an optional and by default disabled page level switch? You’ve just made a relatively simple fix to a solution a nasty morass of hard to discover configuration settings??? The original way this worked was perfectly discoverable via attributes in the page. Now you can set this setting in the page and get completely unexpected behavior and you are required to set what effectively amounts to a backwards compatibility flag in the configuration file. It turns out the real reason for the .config flag is that the request validation behavior has moved from WebForms pipeline down into the entire ASP.NET/IIS request pipeline and is now applied against all requests. Here’s what the breaking changes page from Microsoft says about it: The request validation feature in ASP.NET provides a certain level of default protection against cross-site scripting (XSS) attacks. In previous versions of ASP.NET, request validation was enabled by default. However, it applied only to ASP.NET pages (.aspx files and their class files) and only when those pages were executing. In ASP.NET 4, by default, request validation is enabled for all requests, because it is enabled before the BeginRequest phase of an HTTP request. As a result, request validation applies to requests for all ASP.NET resources, not just .aspx page requests. This includes requests such as Web service calls and custom HTTP handlers. Request validation is also active when custom HTTP modules are reading the contents of an HTTP request. As a result, request validation errors might now occur for requests that previously did not trigger errors. To revert to the behavior of the ASP.NET 2.0 request validation feature, add the following setting in the Web.config file: <httpRuntime requestValidationMode="2.0" /> However, we recommend that you analyze any request validation errors to determine whether existing handlers, modules, or other custom code accesses potentially unsafe HTTP inputs that could be XSS attack vectors. Ok, so ValidateRequest of the form still works as it always has but it’s actually the ASP.NET Event Pipeline, not WebForms that’s throwing the above exception as request validation is applied to every request that hits the pipeline. Creating the runtime override removes the HttpRuntime checking and restores the WebForms only behavior. That fixes my immediate problem but still leaves me wondering especially given the vague wording of the above explanation. One thing that’s missing in the description is above is one important detail: The request validation is applied only to application/x-www-form-urlencoded POST content not to all inbound POST data. When I first read this this freaked me out because it sounds like literally ANY request hitting the pipeline is affected. To make sure this is not really so I created a quick handler: public class Handler1 : IHttpHandler { public void ProcessRequest(HttpContext context) { context.Response.ContentType = "text/plain"; context.Response.Write("Hello World <hr>" + context.Request.Form.ToString()); } public bool IsReusable { get { return false; } } } and called it with Fiddler by posting some XML to the handler using a default form-urlencoded POST content type: and sure enough – hitting the handler also causes the request validation error and 500 server response. Changing the content type to text/xml effectively fixes the problem however, bypassing the request validation filter so Web Services/AJAX handlers and custom modules/handlers that implement custom protocols aren’t affected as long as they work with special input content types. It also looks that multipart encoding does not trigger event validation of the runtime either so this request also works fine: POST http://rasnote/weblog/handler1.ashx HTTP/1.1 Content-Type: multipart/form-data; boundary=------7cf2a327f01ae User-Agent: West Wind Internet Protocols 5.53 Host: rasnote Content-Length: 40 Pragma: no-cache <xml>asdasd</xml>--------7cf2a327f01ae *That* probably should trigger event validation – since it is a potential HTML form submission, but it doesn’t. New Runtime Feature, Global Scope Only? Ok, so request validation is now a runtime feature but sadly it’s a feature that’s scoped to the ASP.NET Runtime – effective scope to the entire running application/app domain. You can still manually force validation using Request.ValidateInput() which gives you the option to do this in code, but that realistically will only work with the requestValidationMode set to V2.0 as well since the 4.0 mode auto-fires before code ever gets a chance to intercept the call. Given all that, the new setting in ASP.NET 4.0 seems to limit options and makes things more difficult and less flexible. Of course Microsoft gets to say ASP.NET is more secure by default because of it but what good is that if you have to turn off this flag the very first time you need to allow one single request that bypasses request validation??? This is really shortsighted design… <sigh>© Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET

Read the article

Looking into Entity Framework Code First Migrations

- by nikolaosk

In this post I will introduce you to Code First Migrations, an Entity Framework feature introduced in version 4.3 back in February of 2012.I have extensively covered Entity Framework in this blog. Please find my other Entity Framework posts here . Before the addition of Code First Migrations (4.1,4.2 versions), Code First database initialisation meant that Code First would create the database if it does not exist (the default behaviour - CreateDatabaseIfNotExists). The other pattern we could use is DropCreateDatabaseIfModelChanges which means that Entity Framework, will drop the database if it realises that model has changes since the last time it created the database.The final pattern is DropCreateDatabaseAlways which means that Code First will recreate the database every time one runs the application.That is of course fine for the development database but totally unacceptable and catastrophic when you have a production database. We cannot lose our data because of the work that Code First works.Migrations solve this problem.With migrations we can modify the database without completely dropping it.We can modify the database schema to reflect the changes to the model without losing data.In version EF 5.0 migrations are fully included and supported. I will demonstrate migrations with a hands-on example.Let me say a few words first about Entity Framework first. The .Net framework provides support for Object Relational Mappingthrough EF. So EF is a an ORM tool and it is now the main data access technology that microsoft works on. I use it quite extensively in my projects. Through EF we have many things out of the box provided for us. We have the automatic generation of SQL code.It maps relational data to strongly types objects.All the changes made to the objects in the memory are persisted in a transactional way back to the data store. You can find in this post an example on how to use the Entity Framework to retrieve data from an SQL Server Database using the "Database/Schema First" approach.In this approach we make all the changes at the database level and then we update the model with those changes. In this post you can see an example on how to use the "Model First" approach when working with ASP.Net and the Entity Framework.This model was firstly introduced in EF version 4.0 and we could start with a blank model and then create a database from that model.When we made changes to the model , we could recreate the database from the new model. The Code First approach is the more code-centric than the other two. Basically we write POCO classes and then we persist to a database using something called DBContext.Code First relies on DbContext. We create 2,3 classes (e.g Person,Product) with properties and then these classes interact with the DbContext class we can create a new database based upon our POCOS classes and have tables generated from those classes.We do not have an .edmx file in this approach.By using this approach we can write much easier unit tests.DbContext is a new context class and is smaller,lightweight wrapper for the main context class which is ObjectContext (Schema First and Model First).Let's move on to our hands-on example.I have installed VS 2012 Ultimate edition in my Windows 8 machine. 1) Create an empty asp.net web application. Give your application a suitable name. Choose C# as the development language2) Add a new web form item in your application. Leave the default name.3) Create a new folder. Name it CodeFirst .4) Add a new item in your application, a class file. Name it Footballer.cs. This is going to be a simple POCO class.Place this class file in the CodeFirst folder.The code follows public class Footballer { public int FootballerID { get; set; } public string FirstName { get; set; } public string LastName { get; set; } public double Weight { get; set; } public double Height { get; set; } }5) We will have to add EF 5.0 to our project. Right-click on the project in the Solution Explorer and select Manage NuGet Packages... for it.In the window that will pop up search for Entity Framework and install it.Have a look at the picture below If you want to find out if indeed EF version is 5.0 version is installed have a look at the References. Have a look at the picture below to see what you will see if you have installed everything correctly.Have a look at the picture below 6) Then we need to create a context class that inherits from DbContext.Add a new class to the CodeFirst folder.Name it FootballerDBContext.Now that we have the entity classes created, we must let the model know.I will have to use the DbSet<T> property.The code for this class follows public class FootballerDBContext:DbContext { public DbSet<Footballer> Footballers { get; set; } } Do not forget to add (using System.Data.Entity;) in the beginning of the class file 7) We must take care of the connection string. It is very easy to create one in the web.config.It does not matter that we do not have a database yet.When we run the DbContext and query against it , it will use a connection string in the web.config and will create the database based on the classes.I will use the name "FootballTraining" for the database.In my case the connection string inside the web.config, looks like this <connectionStrings> <add name="CodeFirstDBContext" connectionString="server=.;integrated security=true; database=FootballTraining" providerName="System.Data.SqlClient"/> </connectionStrings>8) Now it is time to create Linq to Entities queries to retrieve data from the database . Add a new class to your application in the CodeFirst folder.Name the file DALfootballer.csWe will create a simple public method to retrieve the footballers. The code for the class followspublic class DALfootballer { FootballerDBContext ctx = new FootballerDBContext(); public List<Footballer> GetFootballers() { var query = from player in ctx.Footballers select player; return query.ToList(); } } 9) Place a GridView control on the Default.aspx page and leave the default name.Add an ObjectDataSource control on the Default.aspx page and leave the default name. Set the DatasourceID property of the GridView control to the ID of the ObjectDataSource control.(DataSourceID="ObjectDataSource1" ). Let's configure the ObjectDataSource control. Click on the smart tag item of the ObjectDataSource control and select Configure Data Source. In the Wizzard that pops up select the DALFootballer class and then in the next step choose the GetFootballers() method.Click Finish to complete the steps of the wizzard.Build and Run your application. 10) Obviously you will not see any records coming back from your database, because we have not inserted anything. The database is created, though.Have a look at the picture below. 11) Now let's change the POCO class. Let's add a new property to the Footballer.cs class. public int Age { get; set; } Build and run your application again. You will receive an error. Have a look at the picture below 12) That was to be expected.EF Code First Migrations is not activated by default. We have to activate them manually and configure them according to your needs. We will open the Package Manager Console from the Tools menu within Visual Studio 2012.Then we will activate the EF Code First Migration Features by writing the command “Enable-Migrations”. Have a look at the picture below. This adds a new folder Migrations in our project. A new auto-generated class Configuration.cs is created.Another class is also created [CURRENTDATE]_InitialCreate.cs and added to our project.The Configuration.cs is shown in the picture below. The [CURRENTDATE]_InitialCreate.cs is shown in the picture below 13) ??w we are ready to migrate the changes in the database. We need to run the Add-Migration Age command in Package Manager ConsoleAdd-Migration will scaffold the next migration based on changes you have made to your model since the last migration was created.In the Migrations folder, the file 201211201231066_Age.cs is created.Have a look at the picture below to see the newly generated file and its contents. Now we can run the Update-Database command in Package Manager Console .See the picture above.Code First Migrations will compare the migrations in our Migrations folder with the ones that have been applied to the database. It will see that the Age migration needs to be applied, and run it.The EFMigrations.CodeFirst.FootballeDBContext database is now updated to include the Age column in the Footballers table.Build and run your application.Everything will work fine now.Have a look at the picture below to see the migrations applied to our table. 14) We may want it to automatically upgrade the database (by applying any pending migrations) when the application launches.Let's add another property to our Poco class. public string TShirtNo { get; set; }We want this change to migrate automatically to the database.We go to the Configuration.cs we enable automatic migrations. public Configuration() { AutomaticMigrationsEnabled = true; } In the Page_Load event handling routine we have to register the MigrateDatabaseToLatestVersion database initializer. A database initializer simply contains some logic that is used to make sure the database is setup correctly. protected void Page_Load(object sender, EventArgs e) { Database.SetInitializer(new MigrateDatabaseToLatestVersion<FootballerDBContext, Configuration>()); } Build and run your application. It will work fine. Have a look at the picture below to see the migrations applied to our table in the database. Hope it helps!!!

Read the article

Gnome Do not Launching

- by PyRulez

When I try running gnome do, I get this. chris@Chris-Ubuntu-Laptop:~$ gnome-do pgrep: invalid user name: -u and it is not writable Trying sudo: chris@Chris-Ubuntu-Laptop:~$ sudo gnome-do [NetworkService] Could not initialize Network Manager dbus: Unable to open the session message bus. [Error 17:54:30.122] [SystemService] Could not initialize dbus: Unable to open the session message bus. (Do:2401): Wnck-CRITICAL **: wnck_set_client_type got called multiple times. (Do:2401): libdo-WARNING **: Binding '<Super>space' failed! [Error 17:54:30.649] [AbstractKeyBindingService] Key "" is already mapped. Tomboy.NotesItemSource "Tomboy Notes" encountered an error in UpdateItems: System.TypeInitializationException: An exception was thrown by the type initializer for Tomboy.TomboyDBus ---> System.Exception: Unable to open the session message bus. ---> System.ArgumentNullException: Argument cannot be null. Parameter name: address at NDesk.DBus.Bus.Open (System.String address) [0x00000] in <filename unknown>:0 at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 at Tomboy.TomboyDBus..cctor () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at Tomboy.NotesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Firefox.PlacesItemSource "Firefox Places" encountered an error in UpdateItems: System.InvalidCastException: Cannot cast from source type to destination type. at Mono.Data.Sqlite.SqliteDataReader.VerifyType (Int32 i, DbType typ) [0x00000] in <filename unknown>:0 at Mono.Data.Sqlite.SqliteDataReader.GetString (Int32 i) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource+<LoadPlaceItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem].AddEnumerable (IEnumerable`1 enumerable) [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem]..ctor (IEnumerable`1 collection) [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.ToArray[PlaceItem] (IEnumerable`1 source) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Do.Universe.Linux.GNOMESpecialLocationsItemSource "GNOME Special Locations" encountered an error in UpdateItems: System.IO.FileNotFoundException: Could not find file "/root/.gtk-bookmarks". File name: '/root/.gtk-bookmarks' at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean anonymous, FileOptions options) [0x00000] in <filename unknown>:0 at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.FileStream:.ctor (string,System.IO.FileMode,System.IO.FileAccess,System.IO.FileShare) at System.IO.File.OpenRead (System.String path) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path, System.Text.Encoding encoding, Boolean detectEncodingFromByteOrderMarks, Int32 bufferSize) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.StreamReader:.ctor (string) at Do.Universe.Linux.GNOMESpecialLocationsItemSource+<ReadBookmarkItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at Do.Universe.Linux.GNOMESpecialLocationsItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . ^[^\Full thread dump: "<unnamed thread>" tid=0x0xb7570700 this=0x0x56f18 thread handle 0x403 state : not waiting owns () at (wrapper managed-to-native) Mono.Unix.Native.Syscall.read (int,intptr,ulong) <0xffffffff> at Mono.Unix.Native.Syscall.read (int,void*,ulong) <0x00023> at Mono.Unix.UnixStream.Read (byte[],int,int) <0x0008b> at NDesk.DBus.Connection.ReadMessage () <0x0003c> at NDesk.DBus.Connection.Iterate () <0x0001b> at NDesk.DBus.BusG/<Init>c__AnonStorey0.<>m__0 (intptr,NDesk.GLib.IOCondition,intptr) <0x00033> at (wrapper native-to-managed) NDesk.DBus.BusG/<Init>c__AnonStorey0.<>m__0 (intptr,NDesk.GLib.IOCondition,intptr) <0xffffffff> at (wrapper managed-to-native) Gtk.Clipboard.gtk_clipboard_wait_is_text_available (intptr) <0xffffffff> at Gtk.Clipboard.WaitIsTextAvailable () <0x00017> at Do.Universe.SelectedTextItem.UpdateSelection (object,System.EventArgs) <0x00027> at Do.Platform.AbstractApplicationService.OnSummoned () <0x00025> at Do.Platform.ApplicationService.<ApplicationService>m__31 (object,System.EventArgs) <0x00013> at Do.Core.Controller.OnSummoned () <0x00025> at Do.Core.Controller.Summon () <0x00027> at Do.Do.Main (string[]) <0x001eb> at (wrapper runtime-invoke) <Module>.runtime_invoke_void_object (object,intptr,intptr,intptr) <0xffffffff> "<unnamed thread>" tid=0x0xb2c81b40 this=0x0x194150 thread handle 0x412 state : interrupted state owns () at (wrapper managed-to-native) System.IO.InotifyWatcher.ReadFromFD (intptr,byte[],intptr) <0xffffffff> at System.IO.InotifyWatcher.Monitor () <0x0005f> at System.Threading.Thread.StartInternal () <0x00057> at (wrapper runtime-invoke) object.runtime_invoke_void__this__ (object,intptr,intptr,intptr) <0xffffffff> "Universe Update Dispatcher" tid=0x0xb29ffb40 this=0x0x569d8 thread handle 0x41b state : interrupted state owns () at (wrapper managed-to-native) System.Threading.WaitHandle.WaitOne_internal (System.Threading.WaitHandle,intptr,int,bool) <0xffffffff> at System.Threading.WaitHandle.WaitOne (System.TimeSpan,bool) <0x00133> at System.Threading.WaitHandle.WaitOne (System.TimeSpan) <0x00022> at Do.Core.UniverseManager.UniverseUpdateLoop () <0x0007a> at System.Threading.Thread.StartInternal () <0x00057> at (wrapper runtime-invoke) object.runtime_invoke_void__this__ (object,intptr,intptr,intptr) <0xffffffff> Tomboy.NotesItemSource "Tomboy Notes" encountered an error in UpdateItems: System.TypeInitializationException: An exception was thrown by the type initializer for Tomboy.TomboyDBus ---> System.Exception: Unable to open the session message bus. ---> System.ArgumentNullException: Argument cannot be null. Parameter name: address at NDesk.DBus.Bus.Open (System.String address) [0x00000] in <filename unknown>:0 at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 at Tomboy.TomboyDBus..cctor () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at Tomboy.NotesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Firefox.PlacesItemSource "Firefox Places" encountered an error in UpdateItems: System.InvalidCastException: Cannot cast from source type to destination type. at Mono.Data.Sqlite.SqliteDataReader.VerifyType (Int32 i, DbType typ) [0x00000] in <filename unknown>:0 at Mono.Data.Sqlite.SqliteDataReader.GetString (Int32 i) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource+<LoadPlaceItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem].AddEnumerable (IEnumerable`1 enumerable) [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem]..ctor (IEnumerable`1 collection) [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.ToArray[PlaceItem] (IEnumerable`1 source) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Do.Universe.Linux.GNOMESpecialLocationsItemSource "GNOME Special Locations" encountered an error in UpdateItems: System.IO.FileNotFoundException: Could not find file "/root/.gtk-bookmarks". File name: '/root/.gtk-bookmarks' at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean anonymous, FileOptions options) [0x00000] in <filename unknown>:0 at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.FileStream:.ctor (string,System.IO.FileMode,System.IO.FileAccess,System.IO.FileShare) at System.IO.File.OpenRead (System.String path) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path, System.Text.Encoding encoding, Boolean detectEncodingFromByteOrderMarks, Int32 bufferSize) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.StreamReader:.ctor (string) at Do.Universe.Linux.GNOMESpecialLocationsItemSource+<ReadBookmarkItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at Do.Universe.Linux.GNOMESpecialLocationsItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . It stops when I try my key combination, ctrl-alt-. It does not pop up though.

Read the article

C#: My World Clock

- by Bruce Eitman

[Placeholder: I will post the entire project soon] I have been working on cleaning my office of 8 years of stuff from several engineers working on many projects. It turns out that we have a few extra single board computers with displays, so at the end of the day last Friday I though why not create a little application to display the time, you know, a clock. How difficult could that be? It turns out that it is quite simple – until I decided to gold plate the project by adding time displays for our offices around the world. I decided to use C#, which actually made creating the main clock quite easy. The application was simply a text box and a timer. I set the timer to fire a couple of times a second, and when it does use a DateTime object to get the current time and retrieve a string to display. And I could have been done, but of course that gold plating came up. Seems simple enough, simply offset the time from the local time to the location that I want the time for and display it. Sure enough, I had the time displayed for UK, Italy, Kansas City, Japan and China in no time at all. But it is October, and for those of us still stuck with Daylight Savings Time, we know that the clocks are about to change. My first attempt was to simply check to see if the local time was DST or Standard time, then change the offset for China. China doesn’t have Daylight Savings Time. If you know anything about the time changes around the world, you already know that my plan is flawed – in a big way. It turns out that the transitions in and out of DST take place at different times around the world. If you didn’t know that, do a quick search for “Daylight Savings” and you will find many WEB sites dedicated to tracking the time changes dates, and times. Now the real challenge of this application; how do I programmatically find out when the time changes occur and handle them correctly? After a considerable amount of research it turns out that the solution is to read the data from the registry and parse it to figure out when the time changes occur. Reading Time Change Information from the Registry Reading the data from the registry is simple, using the data is a little more complicated. First, reading from the registry can be done like: byte[] binarydata = (byte[])Registry.GetValue("HKEY_LOCAL_MACHINE\\Time Zones\\Eastern Standard Time", "TZI", null); Where I have hardcoded the registry key for example purposes, but in the end I will use some variables. We now have a binary blob with the data, but it needs to be converted to use the real data. To start we will need a couple of structs to hold the data and make it usable. We will need a SYSTEMTIME and REG_TZI_FORMAT. You may have expected that we would need a TIME_ZONE_INFORMATION struct, but we don’t. The data is stored in the registry as a REG_TZI_FORMAT, which excludes some of the values found in TIME_ZONE_INFORMATION. struct SYSTEMTIME { internal short wYear; internal short wMonth; internal short wDayOfWeek; internal short wDay; internal short wHour; internal short wMinute; internal short wSecond; internal short wMilliseconds; } struct REG_TZI_FORMAT { internal long Bias; internal long StdBias; internal long DSTBias; internal SYSTEMTIME StandardStart; internal SYSTEMTIME DSTStart; } Now we need to convert the binary blob to a REG_TZI_FORMAT. To do that I created the following helper functions: private void BinaryToSystemTime(ref SYSTEMTIME ST, byte[] binary, int offset) { ST.wYear = (short)(binary[offset + 0] + (binary[offset + 1] << 8)); ST.wMonth = (short)(binary[offset + 2] + (binary[offset + 3] << 8)); ST.wDayOfWeek = (short)(binary[offset + 4] + (binary[offset + 5] << 8)); ST.wDay = (short)(binary[offset + 6] + (binary[offset + 7] << 8)); ST.wHour = (short)(binary[offset + 8] + (binary[offset + 9] << 8)); ST.wMinute = (short)(binary[offset + 10] + (binary[offset + 11] << 8)); ST.wSecond = (short)(binary[offset + 12] + (binary[offset + 13] << 8)); ST.wMilliseconds = (short)(binary[offset + 14] + (binary[offset + 15] << 8)); } private REG_TZI_FORMAT ConvertFromBinary(byte[] binarydata) { REG_TZI_FORMAT RTZ = new REG_TZI_FORMAT(); RTZ.Bias = binarydata[0] + (binarydata[1] << 8) + (binarydata[2] << 16) + (binarydata[3] << 24); RTZ.StdBias = binarydata[4] + (binarydata[5] << 8) + (binarydata[6] << 16) + (binarydata[7] << 24); RTZ.DSTBias = binarydata[8] + (binarydata[9] << 8) + (binarydata[10] << 16) + (binarydata[11] << 24); BinaryToSystemTime(ref RTZ.StandardStart, binarydata, 4 + 4 + 4); BinaryToSystemTime(ref RTZ.DSTStart, binarydata, 4 + 16 + 4 + 4); return RTZ; } I am the first to admit that there may be a better way to get the settings from the registry and into the REG_TXI_FORMAT, but I am not a great C# programmer which I have said before on this blog. So sometimes I chose brute force over elegant. Now that we have the Bias information and the start date information, we can start to make sense of it. The bias is an offset, in minutes, from local time (if already in local time for the time zone in question) to get to UTC – or as Microsoft defines it: UTC = local time + bias. Standard bias is an offset to adjust for standard time, which I think is usually zero. And DST bias is and offset to adjust for daylight savings time. Since we don’t have the local time for a time zone other than the one that the computer is set to, what we first need to do is convert local time to UTC, which is simple enough using: DateTime.Now.ToUniversalTime(); Then, since we have UTC we need to do a little math to alter the formula to: local time = UTC – bias. In other words, we need to subtract the bias minutes. I am ahead of myself though, the standard and DST start dates really aren’t dates. Instead they indicate the month, day of week and week number of the time change. The dDay member of SYSTEM time will be set to the week number of the date change indicating that the change happens on the first, second… day of week of the month. So we need to convert them to dates so that we can determine which bias to use, and when to change to a different bias. To do that, I wrote the following function: private DateTime SystemTimeToDateTimeStart(SYSTEMTIME Time, int Year) { DayOfWeek[] Days = { DayOfWeek.Sunday, DayOfWeek.Monday, DayOfWeek.Tuesday, DayOfWeek.Wednesday, DayOfWeek.Thursday, DayOfWeek.Friday, DayOfWeek.Saturday }; DateTime InfoTime = new DateTime(Year, Time.wMonth, Time.wDay == 1 ? 1 : ((Time.wDay - 1) * 7) + 1, Time.wHour, Time.wMinute, Time.wSecond, DateTimeKind.Utc); DateTime BestGuess = InfoTime; while (BestGuess.DayOfWeek != Days[Time.wDayOfWeek]) { BestGuess = BestGuess.AddDays(1); } return BestGuess; } SystemTimeToDateTimeStart gets two parameters; a SYSTEMTIME and a year. The reason is that we will try this year and next year because we are interested in start dates that are in the future, not the past. The function starts by getting a new Datetime with the first possible date and then looking for the correct date. Using the start dates, we can then determine the correct bias to use, and the next date that time will change: NextTimeChange = StandardChange; CurrentBias = TimezoneSettings.Bias + TimezoneSettings.DSTBias; if (DSTChange.Year != 1 && StandardChange.Year != 1) { if (DSTChange.CompareTo(StandardChange) < 0) { NextTimeChange = DSTChange; CurrentBias = TimezoneSettings.StdBias + TimezoneSettings.Bias; } } else { // I don't like this, but it turns out that China Standard Time // has a DSTBias of -60 on every Windows system that I tested. // So, if no DST transitions, then just use the Bias without // any offset CurrentBias = TimezoneSettings.Bias; } Note that some time zones do not change time, in which case the years will remain set to 1. Further, I found that the registry settings are actually wrong in that the DST Bias is set to -60 for China even though there is not DST in China, so I ignore the standard and DST bias for those time zones. There is one thing that I have not solved, and don’t plan to solve. If the time zone for this computer changes, this application will not update the clock using the new time zone. I tell you this because you may need to deal with it – I do not because I won’t let the user get to the control panel applet to change the timezone. Copyright © 2012 – Bruce Eitman All Rights Reserved

Read the article

Performance Optimization – It Is Faster When You Can Measure It

- by Alois Kraus

Performance optimization in bigger systems is hard because the measured numbers can vary greatly depending on the measurement method of your choice. To measure execution timing of specific methods in your application you usually use Time Measurement Method Potential Pitfalls Stopwatch Most accurate method on recent processors. Internally it uses the RDTSC instruction. Since the counter is processor specific you can get greatly different values when your thread is scheduled to another core or the core goes into a power saving mode. But things do change luckily: Intel's Designer's vol3b, section 16.11.1 "16.11.1 Invariant TSC The time stamp counter in newer processors may support an enhancement, referred to as invariant TSC. Processor's support for invariant TSC is indicated by CPUID.80000007H:EDX[8]. The invariant TSC will run at a constant rate in all ACPI P-, C-. and T-states. This is the architectural behavior moving forward. On processors with invariant TSC support, the OS may use the TSC for wall clock timer services (instead of ACPI or HPET timers). TSC reads are much more efficient and do not incur the overhead associated with a ring transition or access to a platform resource." DateTime.Now Good but it has only a resolution of 16ms which can be not enough if you want more accuracy. Reporting Method Potential Pitfalls Console.WriteLine Ok if not called too often. Debug.Print Are you really measuring performance with Debug Builds? Shame on you. Trace.WriteLine Better but you need to plug in some good output listener like a trace file. But be aware that the first time you call this method it will read your app.config and deserialize your system.diagnostics section which does also take time. In general it is a good idea to use some tracing library which does measure the timing for you and you only need to decorate some methods with tracing so you can later verify if something has changed for the better or worse. In my previous article I did compare measuring performance with quantum mechanics. This analogy does work surprising well. When you measure a quantum system there is a lower limit how accurately you can measure something. The Heisenberg uncertainty relation does tell us that you cannot measure of a quantum system the impulse and location of a particle at the same time with infinite accuracy. For programmers the two variables are execution time and memory allocations. If you try to measure the timings of all methods in your application you will need to store them somewhere. The fastest storage space besides the CPU cache is the memory. But if your timing values do consume all available memory there is no memory left for the actual application to run. On the other hand if you try to record all memory allocations of your application you will also need to store the data somewhere. This will cost you memory and execution time. These constraints are always there and regardless how good the marketing of tool vendors for performance and memory profilers are: Any measurement will disturb the system in a non predictable way. Commercial tool vendors will tell you they do calculate this overhead and subtract it from the measured values to give you the most accurate values but in reality it is not entirely true. After falling into the trap to trust the profiler timings several times I have got into the habit to Measure with a profiler to get an idea where potential bottlenecks are. Measure again with tracing only the specific methods to check if this method is really worth optimizing. Optimize it Measure again. Be surprised that your optimization has made things worse. Think harder Implement something that really works. Measure again Finished! - Or look for the next bottleneck. Recently I have looked into issues with serialization performance. For serialization DataContractSerializer was used and I was not sure if XML is really the most optimal wire format. After looking around I have found protobuf-net which uses Googles Protocol Buffer format which is a compact binary serialization format. What is good for Google should be good for us. A small sample app to check out performance was a matter of minutes: using ProtoBuf; using System; using System.Diagnostics; using System.IO; using System.Reflection; using System.Runtime.Serialization; [DataContract, Serializable] class Data { [DataMember(Order=1)] public int IntValue { get; set; } [DataMember(Order = 2)] public string StringValue { get; set; } [DataMember(Order = 3)] public bool IsActivated { get; set; } [DataMember(Order = 4)] public BindingFlags Flags { get; set; } } class Program { static MemoryStream _Stream = new MemoryStream(); static MemoryStream Stream { get { _Stream.Position = 0; _Stream.SetLength(0); return _Stream; } } static void Main(string[] args) { DataContractSerializer ser = new DataContractSerializer(typeof(Data)); Data data = new Data { IntValue = 100, IsActivated = true, StringValue = "Hi this is a small string value to check if serialization does work as expected" }; var sw = Stopwatch.StartNew(); int Runs = 1000 * 1000; for (int i = 0; i < Runs; i++) { //ser.WriteObject(Stream, data); Serializer.Serialize<Data>(Stream, data); } sw.Stop(); Console.WriteLine("Did take {0:N0}ms for {1:N0} objects", sw.Elapsed.TotalMilliseconds, Runs); Console.ReadLine(); } } The results are indeed promising: Serializer Time in ms N objects protobuf-net 807 1000000 DataContract 4402 1000000 Nearly a factor 5 faster and a much more compact wire format. Lets use it! After switching over to protbuf-net the transfered wire data has dropped by a factor two (good) and the performance has worsened by nearly a factor two. How is that possible? We have measured it? Protobuf-net is much faster! As it turns out protobuf-net is faster but it has a cost: For the first time a type is de/serialized it does use some very smart code-gen which does not come for free. Lets try to measure this one by setting of our performance test app the Runs value not to one million but to 1. Serializer Time in ms N objects protobuf-net 85 1 DataContract 24 1 The code-gen overhead is significant and can take up to 200ms for more complex types. The break even point where the code-gen cost is amortized by its faster serialization performance is (assuming small objects) somewhere between 20.000-40.000 serialized objects. As it turned out my specific scenario involved about 100 types and 1000 serializations in total. That explains why the good old DataContractSerializer is not so easy to take out of business. The final approach I ended up was to reduce the number of types and to serialize primitive types via BinaryWriter directly which turned out to be a pretty good alternative. It sounded good until I measured again and found that my optimizations so far do not help much. After looking more deeper at the profiling data I did found that one of the 1000 calls did take 50% of the time. So how do I find out which call it was? Normal profilers do fail short at this discipline. A (totally undeserved) relatively unknown profiler is SpeedTrace which does unlike normal profilers create traces of your applications by instrumenting your IL code at runtime. This way you can look at the full call stack of the one slow serializer call to find out if this stack was something special. Unfortunately the call stack showed nothing special. But luckily I have my own tracing as well and I could see that the slow serializer call did happen during the serialization of a bool value. When you encounter after much analysis something unreasonable you cannot explain it then the chances are good that your thread was suspended by the garbage collector. If there is a problem with excessive GCs remains to be investigated but so far the serialization performance seems to be mostly ok. When you do profile a complex system with many interconnected processes you can never be sure that the timings you just did measure are accurate at all. Some process might be hitting the disc slowing things down for all other processes for some seconds as well. There is a big difference between warm and cold startup. If you restart all processes you can basically forget the first run because of the OS disc cache, JIT and GCs make the measured timings very flexible. When you are in need of a random number generator you should measure cold startup times of a sufficiently complex system. After the first run you can try again getting different and much lower numbers. Now try again at least two times to get some feeling how stable the numbers are. Oh and try to do the same thing the next day. It might be that the bottleneck you found yesterday is gone today. Thanks to GC and other random stuff it can become pretty hard to find stuff worth optimizing if no big bottlenecks except bloatloads of code are left anymore. When I have found a spot worth optimizing I do make the code changes and do measure again to check if something has changed. If it has got slower and I am certain that my change should have made it faster I can blame the GC again. The thing is that if you optimize stuff and you allocate less objects the GC times will shift to some other location. If you are unlucky it will make your faster working code slower because you see now GCs at times where none were before. This is where the stuff does get really tricky. A safe escape hatch is to create a repro of the slow code in an isolated application so you can change things fast in a reliable manner. Then the normal profilers do also start working again. As Vance Morrison does point out it is much more complex to profile a system against the wall clock compared to optimize for CPU time. The reason is that for wall clock time analysis you need to understand how your system does work and which threads (if you have not one but perhaps 20) are causing a visible delay to the end user and which threads can wait a long time without affecting the user experience at all. Next time: Commercial profiler shootout.

Read the article

Updating a SharePoint master page via a solution (WSP)

- by Kelly Jones

In my last blog post, I wrote how to deploy a SharePoint theme using Features and a solution package. As promised in that post, here is how to update an already deployed master page. There are several ways to update a master page in SharePoint. You could upload a new version to the master page gallery, or you could upload a new master page to the gallery, and then set the site to use this new page. Manually uploading your master page to the master page gallery might be the best option, depending on your environment. For my client, I did these steps in code, which is what they preferred. (Image courtesy of: http://www.joiningdots.net/blog/2007/08/sharepoint-and-quick-launch.html ) Before you decide which method you need to use, take a look at your existing pages. Are they using the SharePoint dynamic token or the static token for the master page reference? The wha, huh? SO, there are four ways to tell an .aspx page hosted in SharePoint which master page it should use: “~masterurl/default.master” – tells the page to use the default.master property of the site “~masterurl/custom.master” – tells the page to use the custom.master property of the site “~site/default.master” – tells the page to use the file named “default.master” in the site’s master page gallery “~sitecollection/default.master” – tells the page to use the file named “default.master” in the site collection’s master page gallery For more information about these tokens, take a look at this article on MSDN. Once you determine which token your existing pages are pointed to, then you know which file you need to update. So, if the ~masterurl tokens are used, then you upload a new master page, either replacing the existing one or adding another one to the gallery. If you’ve uploaded a new file with a new name, you’ll just need to set it as the master page either through the UI (MOSS only) or through code (MOSS or WSS Feature receiver code – or using SharePoint Designer). If the ~site or ~sitecollection tokens were used, then you’re limited to either replacing the existing master page, or editing all of your existing pages to point to another master page. In most cases, it probably makes sense to just replace the master page. For my project, I’m working with WSS and the existing pages are set to the ~sitecollection token. Based on this, I decided to just upload a new version of the existing master page (and not modify the dozens of existing pages). Also, since my client prefers Features and solutions, I created a master page Feature and a corresponding Feature Receiver. For information on creating the elements and feature files, check out this post: http://sharepointmagazine.net/technical/development/deploying-the-master-page . This works fine, unless you are overwriting an existing master page, which was my case. You’ll run into errors because the master page file needs to be checked out, replaced, and then checked in. I wrote code in my Feature Activated event handler to accomplish these steps. Here are the steps necessary in code: Get the file name from the elements file of the Feature Check out the file from the master page gallery Upload the file to the master page gallery Check in the file to the master page gallery Here’s the code in my Feature Receiver: 1: public override void FeatureActivated(SPFeatureReceiverProperties properties) 2: { 3: try 4: { 5: 6: SPElementDefinitionCollection col = properties.Definition.GetElementDefinitions(System.Globalization.CultureInfo.CurrentCulture); 7: 8: using (SPWeb curweb = GetCurWeb(properties)) 9: { 10: foreach (SPElementDefinition ele in col) 11: { 12: if (string.Compare(ele.ElementType, "Module", true) == 0) 13: { 14: // <Module Name="DefaultMasterPage" List="116" Url="_catalogs/masterpage" RootWebOnly="FALSE"> 15: // <File Url="myMaster.master" Type="GhostableInLibrary" IgnoreIfAlreadyExists="TRUE" 16: // Path="MasterPages/myMaster.master" /> 17: // </Module> 18: string Url = ele.XmlDefinition.Attributes["Url"].Value; 19: foreach (System.Xml.XmlNode file in ele.XmlDefinition.ChildNodes) 20: { 21: string Url2 = file.Attributes["Url"].Value; 22: string Path = file.Attributes["Path"].Value; 23: string fileType = file.Attributes["Type"].Value; 24: 25: if (string.Compare(fileType, "GhostableInLibrary", true) == 0) 26: { 27: //Check out file in document library 28: SPFile existingFile = curweb.GetFile(Url + "/" + Url2); 29: 30: if (existingFile != null) 31: { 32: if (existingFile.CheckOutStatus != SPFile.SPCheckOutStatus.None) 33: { 34: throw new Exception("The master page file is already checked out. Please make sure the master page file is checked in, before activating this feature."); 35: } 36: else 37: { 38: existingFile.CheckOut(); 39: existingFile.Update(); 40: } 41: } 42: 43: //Upload file to document library 44: string filePath = System.IO.Path.Combine(properties.Definition.RootDirectory, Path); 45: string fileName = System.IO.Path.GetFileName(filePath); 46: char slash = Convert.ToChar("/"); 47: string[] folders = existingFile.ParentFolder.Url.Split(slash); 48: 49: if (folders.Length > 2) 50: { 51: Logger.logMessage("More than two folders were detected in the library path for the master page. Only two are supported.", 52: Logger.LogEntryType.Information); //custom logging component 53: } 54: 55: SPFolder myLibrary = curweb.Folders[folders[0]].SubFolders[folders[1]]; 56: 57: FileStream fs = File.OpenRead(filePath); 58: 59: SPFile newFile = myLibrary.Files.Add(fileName, fs, true); 60: 61: myLibrary.Update(); 62: newFile.CheckIn("Updated by Feature", SPCheckinType.MajorCheckIn); 63: newFile.Update(); 64: } 65: } 66: } 67: } 68: } 69: } 70: catch (Exception ex) 71: { 72: string msg = "Error occurred during feature activation"; 73: Logger.logException(ex, msg, ""); 74: } 75: 76: } 77: 78: /// <summary> 79: /// Using a Feature's properties, get a reference to the Current Web 80: /// </summary> 81: /// <param name="properties"></param> 82: public SPWeb GetCurWeb(SPFeatureReceiverProperties properties) 83: { 84: SPWeb curweb; 85: 86: //Check if the parent of the web is a site or a web 87: if (properties != null && properties.Feature.Parent.GetType().ToString() == "Microsoft.SharePoint.SPWeb") 88: { 89: 90: //Get web from parent 91: curweb = (SPWeb)properties.Feature.Parent; 92: 93: } 94: else 95: { 96: //Get web from Site 97: using (SPSite cursite = (SPSite)properties.Feature.Parent) 98: { 99: curweb = (SPWeb)cursite.OpenWeb(); 100: } 101: } 102: 103: return curweb; 104: } This did the trick. It allowed me to update my existing master page, through an easily repeatable process (which is great when you are working with more than one environment and what to do things like TEST it!). I did run into what I would classify as a strange issue with one of my subsites, but that’s the topic for another blog post.

Read the article

readonly keyword

- by nmarun

This is something new that I learned about the readonly keyword. Have a look at the following class: 1: public class MyClass 2: { 3: public string Name { get; set; } 4: public int Age { get; set; } 5: 6: private readonly double Delta; 7: 8: public MyClass() 9: { 10: Initializer(); 11: } 12: 13: public MyClass(string name = "", int age = 0) 14: { 15: Name = name; 16: Age = age; 17: Initializer(); 18: } 19: 20: private void Initializer() 21: { 22: Delta = 0.2; 23: } 24: } I have a couple of public properties and a private readonly member. There are two constructors – one that doesn’t take any parameters and the other takes two parameters to initialize the public properties. I’m also calling the Initializer method in both constructors to initialize the readonly member. Now when I build this, the code breaks and the Error window says: “A readonly field cannot be assigned to (except in a constructor or a variable initializer)” Two things after I read this message: It’s such a negative statement. I’d prefer something like: “A readonly field can be assigned to (or initialized) only in a constructor or through a variable initializer” But in my defense, I AM assigning it in a constructor (only indirectly). All I’m doing is creating a method that does it and calling it in a constructor. Turns out, .net was not ‘frameworked’ this way. We need to have the member initialized directly in the constructor. If you have multiple constructors, you can just use the ‘this’ keyword on all except the default constructors to call the default constructor. This default constructor can then initialize your readonly members. This will ensure you’re not repeating the code in multiple places. A snippet of what I’m talking can be seen below: 1: public class Person 2: { 3: public int UniqueNumber { get; set; } 4: public string Name { get; set; } 5: public int Age { get; set; } 6: public DateTime DateOfBirth { get; set; } 7: public string InvoiceNumber { get; set; } 8: 9: private readonly string Alpha; 10: private readonly int Beta; 11: private readonly double Delta; 12: private readonly double Gamma; 13: 14: public Person() 15: { 16: Alpha = "FDSA"; 17: Beta = 2; 18: Delta = 3.0; 19: Gamma = 0.0989; 20: } 21: 22: public Person(int uniqueNumber) : this() 23: { 24: UniqueNumber = uniqueNumber; 25: } 26: } See the syntax in line 22 and you’ll know what I’m talking about. So the default constructor gets called before the one in line 22. These are known as constructor initializers and they allow one constructor to call another. The other ‘myth’ I had about readonly members is that you can set it’s value only once. This was busted as well (I recall Adam and Jamie’s show). Say you’ve initialized the readonly member through a variable initializer. You can over-write this value in any of the constructors any number of times. 1: public class Person 2: { 3: public int UniqueNumber { get; set; } 4: public string Name { get; set; } 5: public int Age { get; set; } 6: public DateTime DateOfBirth { get; set; } 7: public string InvoiceNumber { get; set; } 8: 9: private readonly string Alpha = "asdf"; 10: private readonly int Beta = 15; 11: private readonly double Delta = 0.077; 12: private readonly double Gamma = 1.0; 13: 14: public Person() 15: { 16: Alpha = "FDSA"; 17: Beta = 2; 18: Delta = 3.0; 19: Gamma = 0.0989; 20: } 21: 22: public Person(int uniqueNumber) : this() 23: { 24: UniqueNumber = uniqueNumber; 25: Beta = 3; 26: } 27: 28: public Person(string name, DateTime dob) : this() 29: { 30: Name = name; 31: DateOfBirth = dob; 32: 33: Alpha = ";LKJ"; 34: Gamma = 0.0898; 35: } 36: 37: public Person(int uniqueNumber, string name, int age, DateTime dob, string invoiceNumber) : this() 38: { 39: UniqueNumber = uniqueNumber; 40: Name = name; 41: Age = age; 42: DateOfBirth = dob; 43: InvoiceNumber = invoiceNumber; 44: 45: Alpha = "QWER"; 46: Beta = 5; 47: Delta = 1.0; 48: Gamma = 0.0; 49: } 50: } In the above example, every constructor over-writes the values for the readonly members. This is perfectly valid. There is a possibility that based on the way the object is instantiated, the readonly member will have a different value. Well, that’s all I have for today and read this as it’s on a related topic.

Read the article

Integrating Coherence & Java EE 6 Applications using ActiveCache

- by Ricardo Ferreira

OK, so you are a developer and are starting a new Java EE 6 application using the most wonderful features of the Java EE platform like Enterprise JavaBeans, JavaServer Faces, CDI, JPA e another cool stuff technologies. And your architecture need to hold piece of data into distributed caches to improve application's performance, scalability and reliability? If this is your current facing scenario, maybe you should look closely in the solutions provided by Oracle WebLogic Server. Oracle had integrated WebLogic Server and its champion data caching technology called Oracle Coherence. This seamless integration between this two products provides a comprehensive environment to develop applications without the complexity of extra Java code to manage cache as a dependency, since Oracle provides an DI ("Dependency Injection") mechanism for Coherence, the same DI mechanism available in standard Java EE applications. This feature is called ActiveCache. In this article, I will show you how to configure ActiveCache in WebLogic and at your Java EE application. Configuring WebLogic to manage Coherence Before you start changing your application to use Coherence, you need to configure your Coherence distributed cache. The good news is, you can manage all this stuff without writing a single line of code of XML or even Java. This configuration can be done entirely in the WebLogic administration console. The first thing to do is the setup of a Coherence cluster. A Coherence cluster is a set of Coherence JVMs configured to form one single view of the cache. This means that you can insert or remove members of the cluster without the client application (the application that generates or consume data from the cache) knows about the changes. This concept allows your solution to scale-out without changing the application server JVMs. You can growth your application only in the data grid layer. To start the configuration, you need to configure an machine that points to the server in which you want to execute the Coherence JVMs. WebLogic Server allows you to do this very easily using the Administration Console. In this example, I will call the machine as "coherence-server". Remember that in order to the machine concept works, you need to ensure that the NodeManager are being executed in the target server that the machine points to. The NodeManager executable can be found in <WLS_HOME>/server/bin/startNodeManager.sh. The next thing to do is to configure a Coherence cluster. In the WebLogic administration console, go to Environment > Coherence Clusters and click in "New". Call this Coherence cluster of "my-coherence-cluster". Click in next. Specify a valid cluster address and port. The Coherence members will communicate with each other through this address and port. Our Coherence cluster are now configured. Now it is time to configure the Coherence members and add them to this cluster. In the WebLogic administration console, go to Environment > Coherence Servers and click in "New". In the field "Name" set to "coh-server-1". In the field "Machine", associate this Coherence server to the machine "coherence-server". In the field "Cluster", associate this Coherence server to the cluster named "my-coherence-cluster". Click in "Finish". Start the Coherence server using the "Control" tab of WebLogic administration console. This will instruct WebLogic to start a new JVM of Coherence in the target machine that should join the pre-defined Coherence cluster. Configuring your Java EE Application to Access Coherence Now lets pass to the funny part of the configuration. The first thing to do is to inform your Java EE application which Coherence cluster to join. Oracle had updated WebLogic server deployment descriptors so you will not have to change your code or the containers deployment descriptors like application.xml, ejb-jar.xml or web.xml. In this example, I will show you how to enable DI ("Dependency Injection") to a Coherence cache from a Servlet 3.0 component. In the WEB-INF/weblogic.xml deployment descriptor, put the following metadata information: <?xml version="1.0" encoding="UTF-8"?> <wls:weblogic-web-app xmlns:wls="http://xmlns.oracle.com/weblogic/weblogic-web-app" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd http://xmlns.oracle.com/weblogic/weblogic-web-app http://xmlns.oracle.com/weblogic/weblogic-web-app/1.4/weblogic-web-app.xsd"> <wls:context-root>myWebApp</wls:context-root> <wls:coherence-cluster-ref> <wls:coherence-cluster-name>my-coherence-cluster</wls:coherence-cluster-name> </wls:coherence-cluster-ref> </wls:weblogic-web-app> As you can see, using the "coherence-cluster-name" tag, we are informing our Java EE application that it should join the "my-coherence-cluster" when it loads in the web container. Without this information, the application will not be able to access the predefined Coherence cluster. It will form its own Coherence cluster without any members. So never forget to put this information. Now put the coherence.jar and active-cache-1.0.jar dependencies at your WEB-INF/lib application classpath. You need to deploy this dependencies so ActiveCache can automatically take care of the Coherence cluster join phase. This dependencies can be found in the following locations: - <WLS_HOME>/common/deployable-libraries/active-cache-1.0.jar - <COHERENCE_HOME>/lib/coherence.jar Finally, you need to write down the access code to the Coherence cache at your Servlet. In the following example, we have a Servlet 3.0 component that access a Coherence cache named "transactions" and prints into the browser output the content (the ammount property) of one specific transaction. package com.oracle.coherence.demo.activecache; import java.io.IOException; import javax.annotation.Resource; import javax.servlet.ServletException; import javax.servlet.annotation.WebServlet; import javax.servlet.http.HttpServlet; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import com.tangosol.net.NamedCache; @WebServlet("/demo/specificTransaction") public class TransactionServletExample extends HttpServlet { @Resource(mappedName = "transactions") NamedCache transactions; protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { int transId = Integer.parseInt(request.getParameter("transId")); Transaction transaction = (Transaction) transactions.get(transId); response.getWriter().println("<center>" + transaction.getAmmount() + "</center>"); } } Thats it! No more configuration is necessary and you have all set to start producing and getting data to/from Coherence. As you can see in the example code, the Coherence cache are treated as a normal dependency in the Java EE container. The magic happens behind the scenes when the ActiveCache allows your application to join the defined Coherence cluster. The most interesting thing about this approach is, no matter which type of Coherence cache your are using (Distributed, Partitioned, Replicated, WAN-Remote) for the client application, it is just a simple attribute member of com.tangosol.net.NamedCache type. And its all managed by the Java EE container as an dependency. This means that if you inject the same dependency (the Coherence cache named "transactions") in another Java EE component (JSF managed-bean, Stateless EJB) the cache will be the same. Cool isn't it? Thanks to the CDI technology, we can extend the same support for non-Java EE standards components like simple POJOs. This means that you are not forced to only use Servlets, EJBs or JSF in order to inject Coherence caches. You can do the same approach for regular POJOs created for you and managed by lightweight containers like Spring or Seam.

Read the article

Making a Case For The Command Line

- by Jesse Taber

Originally posted on: http://geekswithblogs.net/GruffCode/archive/2013/06/30/making-a-case-for-the-command-line.aspxI have had an idea percolating in the back of my mind for over a year now that I’ve just recently started to implement. This idea relates to building out “internal tools” to ease the maintenance and on-going support of a software system. The system that I currently work on is (mostly) web-based, so we traditionally we have built these internal tools in the form of pages within the app that are only accessible by our developers and support personnel. These pages allow us to perform tasks within the system that, for one reason or another, we don’t want to let our end users perform (e.g. mass create/update/delete operations on data, flipping switches that turn paid modules of the system on or off, etc). When we try to build new tools like this we often struggle with the level of effort required to build them. Effort Required Creating a whole new page in an existing web application can be a fairly large undertaking. You need to create the page and ensure it will have a layout that is consistent with the other pages in the app. You need to decide what types of input controls need to go onto the page. You need to ensure that everything uses the same style as the rest of the site. You need to figure out what the text on the page should say. Then, when you figure out that you forgot about an input that should really be present you might have to go back and re-work the entire thing. Oh, and in addition to all of that, you still have to, you know, write the code that actually performs the task. Everything other than the code that performs the task at hand is just overhead. We don’t need a fancy date picker control in a nicely styled page for the vast majority of our internal tools. We don’t even really need a page, for that matter. We just need a way to issue a command to the application and have it, in turn, execute the code that we’ve written to accomplish a given task. All we really need is a simple console application! Plumbing Problems A former co-worker of mine, John Sonmez, always advocated the Unix philosophy for building internal tools: start with something that runs at the command line, and then build a UI on top of that if you need to. John’s idea has a lot of merit, and we tried building out some internal tools as simple Console applications. Unfortunately, this was often easier said that done. Doing a “File –> New Project” to build out a tool for a mature system can be pretty daunting because that new project is totally empty. In our case, the web application code had a lot of of “plumbing” built in: it managed authentication and authorization, it handled database connection management for our multi-tenanted architecture, it managed all of the context that needs to follow a user around the application such as their timezone and regional/language settings. In addition, the configuration file for the web application (a web.config in our case because this is an ASP .NET application) is large and would need to be reproduced into a similar configuration file for a Console application. While most of these problems are could be solved pretty easily with some refactoring of the codebase, building Console applications for internal tools still potentially suffers from one pretty big drawback: you’d have to execute them on a machine with network access to all of the needed resources. Obviously, our web servers can easily communicate the the database servers and can publish messages to our service bus, but the same is not true for all of our developer and support personnel workstations. We could have everyone run these tools remotely via RDP or SSH, but that’s a bit cumbersome and certainly a lot less convenient than having the tools built into the web application that is so easily accessible. Mix and Match So we need a way to build tools that are easily accessible via the web application but also don’t require the overhead of creating a user interface. This is where my idea comes into play: why not just build a command line interface into the web application? If it’s part of the web application we get all of the plumbing that comes along with that code, and we’re executing everything on the web servers which means we’ll have access to any external resources that we might need. Rather than having to incur the overhead of creating a brand new page for each tool that we want to build, we can create one new page that simply accepts a command in text form and executes it as a request on the web server. In this way, we can focus on writing the code to accomplish the task. If the tool ends up being heavily used, then (and only then) should we consider spending the time to build a better user experience around it. To be clear, I’m not trying to downplay the importance of building great user experiences into your system; we should all strive to provide the best UX possible to our end users. I’m only advocating this sort of bare-bones interface for internal consumption by the technical staff that builds and supports the software. This command line interface should be the “back end” to a highly polished and eye-pleasing public face. Implementation As I mentioned at the beginning of this post, this is an idea that I’ve had for awhile but have only recently started building out. I’ve outlined some general guidelines and design goals for this effort as follows: Text in, text out: In the interest of keeping things as simple as possible, I want this interface to be purely text-based. Users will submit commands as plain text, and the application will provide responses in plain text. Obviously this text will be “wrapped” within the context of HTTP requests and responses, but I don’t want to have to think about HTML or CSS when taking input from the user or displaying responses back to the user. Task-oriented code only: After building the initial “harness” for this interface, the only code that should need to be written to create a new internal tool should be code that is expressly needed to accomplish the task that the tool is intended to support. If we want to encourage and enable ourselves to build good tooling, we need to lower the barriers to entry as much as possible. Built-in documentation: One of the great things about most command line utilities is the ‘help’ switch that provides usage guidelines and details about the arguments that the utility accepts. Our web-based command line utility should allow us to build the documentation for these tools directly into the code of the tools themselves. I finally started trying to implement this idea when I heard about a fantastic open-source library called CLAP (Command Line Auto Parser) that lets me meet the guidelines outlined above. CLAP lets you define classes with public methods that can be easily invoked from the command line. Here’s a quick example of the code that would be needed to create a new tool to do something within your system: 1: public class CustomerTools 2: { 3: [Verb] 4: public void UpdateName(int customerId, string firstName, string lastName) 5: { 6: //invoke internal services/domain objects/hwatever to perform update 7: } 8: } This is just a regular class with a single public method (though you could have as many methods as you want). The method is decorated with the ‘Verb’ attribute that tells the CLAP library that it is a method that can be invoked from the command line. Here is how you would invoke that code: Parser.Run(args, new CustomerTools()); Note that ‘args’ is just a string[] that would normally be passed passed in from the static Main method of a Console application. Also, CLAP allows you to pass in multiple classes that define [Verb] methods so you can opt to organize the code that CLAP will invoke in any way that you like. You can invoke this code from a command line application like this: SomeExe UpdateName -customerId:123 -firstName:Jesse -lastName:Taber ‘SomeExe’ in this example just represents the name of .exe that is would be created from our Console application. CLAP then interprets the arguments passed in order to find the method that should be invoked and automatically parses out the parameters that need to be passed in. After a quick spike, I’ve found that invoking the ‘Parser’ class can be done from within the context of a web application just as easily as it can from within the ‘Main’ method entry point of a Console application. There are, however, a few sticking points that I’m working around: Splitting arguments into the ‘args’ array like the command line: When you invoke a standard .NET console application you get the arguments that were passed in by the user split into a handy array (this is the ‘args’ parameter referenced above). Generally speaking they get split by whitespace, but it’s also clever enough to handle things like ignoring whitespace in a phrase that is surrounded by quotes. We’ll need to re-create this logic within our web application so that we can give the ‘args’ value to CLAP just like a console application would. Providing a response to the user: If you were writing a console application, you might just use Console.WriteLine to provide responses to the user as to the progress and eventual outcome of the command. We can’t use Console.WriteLine within a web application, so I’ll need to find another way to provide feedback to the user. Preferably this approach would allow me to use the same handler classes from both a Console application and a web application, so some kind of strategy pattern will likely emerge from this effort. Submitting files: Often an internal tool needs to support doing some kind of operation in bulk, and the easiest way to submit the data needed to support the bulk operation is in a file. Getting the file uploaded and available to the CLAP handler classes will take a little bit of effort. Mimicking the console experience: This isn’t really a requirement so much as a “nice to have”. To start out, the command-line interface in the web application will probably be a single ‘textarea’ control with a button to submit the contents to a handler that will pass it along to CLAP to be parsed and run. I think it would be interesting to use some javascript and CSS trickery to change that page into something with more of a “shell” interface look and feel. I’ll be blogging more about this effort in the future and will include some code snippets (or maybe even a full blown example app) as I progress. I also think that I’ll probably end up either submitting some pull requests to the CLAP project or possibly forking/wrapping it into a more web-friendly package and open sourcing that.

Read the article

Process.Start() and ShellExecute() fails with URLs on Windows 8

- by Rick Strahl

Since I installed Windows 8 I've noticed that a number of my applications appear to have problems opening URLs. That is when I click on a link inside of a Windows application, either nothing happens or there's an error that occurs. It's happening both to my own applications and a host of Windows applications I'm running. At first I thought this was an issue with my default browser (Chrome) but after switching the default browser to a few others and experimenting a bit I noticed that the errors occur - oddly enough - only when I run an application as an Administrator. I also tried switching to FireFox and Opera as my default browser and saw exactly the same behavior. The scenario for this is a bit bizarre: Running on Windows 8 Call Process.Start() (or ShellExecute() in Win32 API) with a URL or an HTML file Run 'As Administrator' (works fine under non-elevated user account!) or with UAC off A browser other than Internet Explorer is set as your Default Web Browser Talk about a weird scenario: Something that doesn't work when you run as an Administrator which is supposed to have rights to everything on the system! Instead running under an Admin account - either elevated with a User Account Control prompt or even when running as a full Administrator fails. It appears that this problem does not occur for everyone, but when I looked for a solution to this, I saw quite a few posts in relation to this with no clear resolutions. I have three Windows 8 machines running here in the office and all three of them showed this behavior. Lest you think this is just a programmer's problem - this can affect any software running on your system that needs to run under administrative rights. Try it out Now, in order for this next example to fail, any browser but Internet Explorer has to be your default browser and even then it may not fail depending on how you installed your browser. To see if this is a problem create a small Console application and call Process.Start() with a URL in it:namespace Win8ShellBugConsole { class Program { static void Main(string[] args) { Console.WriteLine("Launching Url..."); Process.Start("http://microsoft.com"); Console.Write("Press any key to continue..."); Console.ReadKey(); Console.WriteLine("\r\n\r\nLaunching image..."); Process.Start(Path.GetFullPath(@"..\..\sailbig.jpg")); Console.Write("Press any key to continue..."); Console.ReadKey(); } } } Compile this code. Then execute the code from Explorer (not from Visual Studio because that may change the permissions). If you simply run the EXE and you're not running as an administrator, you'll see the Web page pop up in the browser as well as the image loading. Now run the same thing with Run As Administrator: Now when you run it you get a nice error when Process.Start() is fired: The same happens if you are running with User Account Control off altogether - ie. you are running as a full admin account. Now if you comment out the URL in the code above and just fire the image display - that works just fine in any user mode. As does opening any other local file type or even starting a new EXE locally (ie. Process.Start("c:\windows\notepad.exe"). All that works, EXCEPT for URLs. The code above uses Process.Start() in .NET but the same happens in Win32 Applications that use the ShellExecute API. In some of my older Fox apps ShellExecute returns an error code of 31 - which is No Shell Association found. What's the Deal? It turns out the problem has to do with the way browsers are registering themselves on Windows. Internet Explorer - being a built-in application in Windows 8 - apparently does this correctly, but other browsers possibly don't or at least didn't at the time I installed them. So even Chrome, which continually updates itself, has a recent version that apparently has this registration issue fixed, I was unable to simply set IE as my default browser then use Chrome to 'Set as Default Browser'. It still didn't work. Neither did using the Set Program Associations dialog which lets you assign what extensions are mapped to by a given application. Each application provides a set of extension/moniker mappings that it supports and this dialog lets you associate them on a system wide basis. This also did not work for Chrome or any of the other browsers at first. However, after repeated retries here eventually I did manage to get FireFox to work, but not any of the others. What Works? Reinstall the Browser In the end I decided on the hard core pull the plug solution: Totally uninstall and re-install Chrome in this case. And lo and behold, after reinstall everything was working fine. Now even removing the association for Chrome, switching to IE as the default browser and then back to Chrome works. But, even though the version of Chrome I was running before uninstalling and reinstalling is the same as I'm running now after the reinstall now it works. Of course I had to find out the hard way, before Richard commented with a note regarding what the issue is with Chrome at least: http://code.google.com/p/chromium/issues/detail?id=156400 As expected the issue is a registration issue - with keys not being registered at the machine level. Reading this I'm still not sure why this should be a problem - an elevated account still runs under the same user account (ie. I'm still rickstrahl even if I Run As Administrator), so why shouldn't an app be able to read my Current User registry hive? And also that doesn't quite explain why if I register the extensions using Run As Administrator in Chrome when using Set as Default Browser). But in the end it works… Not so fast It's now a couple of days later and still there are some oddball problems although this time they appear to be purely Chrome issues. After the reinstall Chrome seems to pop up properly with ShellExecute() calls both in regular user and Admin mode. However, it now looks like Chrome is actually running two completely separate user profiles for each. For example, when I run Visual Studio in Admin mode and go to View in browser, Chrome complains that it was installed in Admin mode and can't launch (WTF?). Then you retry a few times later and it ends up working. When launched that way some of the plug-ins installed don't show up with the effect that sometimes they're visible sometimes they're not. Also Chrome seems to loose my configuration and Google sign in between sessions now, presumably when switching user modes. Add-ins installed in admin mode don't show up in user mode and vice versa. Ah, this is lovely. Did I mention that I freaking hate UAC precisely because of this kind of bullshit. You can never tell exactly what account your app is running under, and apparently apps also have a hard time trying to put data into the right place that works for both scenarios. And as my recent post on using Windows Live accounts shows it's yet another level of abstraction ontop of the underlying system identity that can cause all sort of small side effect headaches like this. Hopefully, most of you are skirting this issue altogether - having installed more recent versions of your favorite browsers. If not, hopefully this post will take you straight to reinstallation to fix this annoying issue.© Rick Strahl, West Wind Technologies, 2005-2012Posted in Windows .NET Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Installing nGinX Reverse Proxy on CentOS 5

- by heavymark

I'm trying to install nGinX as a reverse proxy on CentOS 5 with apache. The instructions to do this are here: http://wiki.mediatemple.net/w/(dv):Configure_nginx_as_reverse_proxy_web_server Note- in the instructions, for the url to get nginx I'm using the following: http://nginx.org/download/nginx-1.0.10.tar.gz Now here is my problem. After installing the required packages and running .configure I get the following: checking for OS + Linux 2.6.18-028stab094.3 x86_64 checking for C compiler ... found + using GNU C compiler + gcc version: 4.1.2 20080704 (Red Hat 4.1.2-51) checking for gcc -pipe switch ... found checking for gcc builtin atomic operations ... found checking for C99 variadic macros ... found checking for gcc variadic macros ... found checking for unistd.h ... found checking for inttypes.h ... found checking for limits.h ... found checking for sys/filio.h ... not found checking for sys/param.h ... found checking for sys/mount.h ... found checking for sys/statvfs.h ... found checking for crypt.h ... found checking for Linux specific features checking for epoll ... found checking for sendfile() ... found checking for sendfile64() ... found checking for sys/prctl.h ... found checking for prctl(PR_SET_DUMPABLE) ... found checking for sched_setaffinity() ... found checking for crypt_r() ... found checking for sys/vfs.h ... found checking for nobody group ... found checking for poll() ... found checking for /dev/poll ... not found checking for kqueue ... not found checking for crypt() ... not found checking for crypt() in libcrypt ... found checking for F_READAHEAD ... not found checking for posix_fadvise() ... found checking for O_DIRECT ... found checking for F_NOCACHE ... not found checking for directio() ... not found checking for statfs() ... found checking for statvfs() ... found checking for dlopen() ... not found checking for dlopen() in libdl ... found checking for sched_yield() ... found checking for SO_SETFIB ... not found checking for SO_ACCEPTFILTER ... not found checking for TCP_DEFER_ACCEPT ... found checking for accept4() ... not found checking for int size ... 4 bytes checking for long size ... 8 bytes checking for long long size ... 8 bytes checking for void * size ... 8 bytes checking for uint64_t ... found checking for sig_atomic_t ... found checking for sig_atomic_t size ... 4 bytes checking for socklen_t ... found checking for in_addr_t ... found checking for in_port_t ... found checking for rlim_t ... found checking for uintptr_t ... uintptr_t found checking for system endianess ... little endianess checking for size_t size ... 8 bytes checking for off_t size ... 8 bytes checking for time_t size ... 8 bytes checking for setproctitle() ... not found checking for pread() ... found checking for pwrite() ... found checking for sys_nerr ... found checking for localtime_r() ... found checking for posix_memalign() ... found checking for memalign() ... found checking for mmap(MAP_ANON|MAP_SHARED) ... found checking for mmap("/dev/zero", MAP_SHARED) ... found checking for System V shared memory ... found checking for POSIX semaphores ... not found checking for POSIX semaphores in libpthread ... found checking for struct msghdr.msg_control ... found checking for ioctl(FIONBIO) ... found checking for struct tm.tm_gmtoff ... found checking for struct dirent.d_namlen ... not found checking for struct dirent.d_type ... found checking for PCRE library ... found checking for system md library ... not found checking for system md5 library ... not found checking for OpenSSL md5 crypto library ... found checking for sha1 in system md library ... not found checking for OpenSSL sha1 crypto library ... found checking for zlib library ... found creating objs/Makefile Configuration summary + using system PCRE library + OpenSSL library is not used + md5: using system crypto library + sha1: using system crypto library + using system zlib library nginx path prefix: "/usr/local/nginx" nginx binary file: "/usr/local/nginx/sbin/nginx" nginx configuration prefix: "/usr/local/nginx/conf" nginx configuration file: "/usr/local/nginx/conf/nginx.conf" nginx pid file: "/usr/local/nginx/logs/nginx.pid" nginx error log file: "/usr/local/nginx/logs/error.log" nginx http access log file: "/usr/local/nginx/logs/access.log" nginx http client request body temporary files: "client_body_temp" nginx http proxy temporary files: "proxy_temp" nginx http fastcgi temporary files: "fastcgi_temp" nginx http uwsgi temporary files: "uwsgi_temp" nginx http scgi temporary files: "scgi_temp" It says if you get errors to stop and make sure packages are installed. I didn't get errors but as you can see I got several "not founds". Are those considered errors? If so how do I resolve that. And as noted in the link, I cannot install through yum, because it wont work with plesk then. Thanks!

Read the article

IntelliSense for Razor Hosting in non-Web Applications

- by Rick Strahl

When I posted my Razor Hosting article a couple of weeks ago I got a number of questions on how to get IntelliSense to work inside of Visual Studio while editing your templates. The answer to this question is mainly dependent on how Visual Studio recognizes assemblies, so a little background is required. If you open a template just on its own as a standalone file by clicking on it say in Explorer, Visual Studio will open up with the template in the editor, but you won’t get any IntelliSense on any of your related assemblies that you might be using by default. It’ll give Intellisense on base System namespace, but not on your imported assembly types. This makes sense: Visual Studio has no idea what the assembly associations for the single file are. There are two options available to you to make IntelliSense work for templates: Add the templates as included files to your non-Web project Add a BIN folder to your template’s folder and add all assemblies required there Including Templates in your Host Project By including templates into your Razor hosting project, Visual Studio will pick up the project’s assembly references and make IntelliSense available for any of the custom types in your project and on your templates. To see this work I moved the \Templates folder from the samples from the Debug\Bin folder into the project root and included the templates in the WinForm sample project. Here’s what this looks like in Visual Studio after the templates have been included: Notice that I take my original example and type cast the Context object to the specific type that it actually represents – namely CustomContext – by using a simple code block: @{ CustomContext Model = Context as CustomContext; } After that assignment my Model local variable is in scope and IntelliSense works as expected. Note that you also will need to add any namespaces with the using command in this case: @using RazorHostingWinForm which has to be defined at the very top of a Razor document. BTW, while you can only pass in a single Context 'parameter’ to the template with the default template I’ve provided realize that you can also assign a complex object to Context. For example you could have a container object that references a variety of other objects which you can then cast to the appropriate types as needed: @{ ContextContainer container = Context as ContextContainer; CustomContext Model = container.Model; CustomDAO DAO = container.DAO; } and so forth. IntelliSense for your Custom Template Notice also that you can get IntelliSense for the top level template by specifying an inherits tag at the top of the document: @inherits RazorHosting.RazorTemplateFolderHost By specifying the above you can then get IntelliSense on your base template’s properties. For example, in my base template there are Request and Response objects. This is very useful especially if you end up creating custom templates that include your custom business objects as you can get effectively see full IntelliSense from the ‘page’ level down. For Html Help Builder for example, I’d have a Help object on the page and assuming I have the references available I can see all the way into that Help object without even having to do anything fancy. Note that the @inherits key is a GREAT and easy way to override the base template you normally specify as the default template. It allows you to create a custom template and as long as it inherits from the base template it’ll work properly. Since the last post I’ve also made some changes in the base template that allow hooking up some simple initialization logic so it gets much more easy to create custom templates and hook up custom objects with an IntializeTemplate() hook function that gets called with the Context and a Configuration object. These objects are objects you can pass in at runtime from your host application and then assign to custom properties on your template. For example the default implementation for RazorTemplateFolderHost does this: public override void InitializeTemplate(object context, object configurationData) { // Pick up configuration data and stuff into Request object RazorFolderHostTemplateConfiguration config = configurationData as RazorFolderHostTemplateConfiguration; this.Request.TemplatePath = config.TemplatePath; this.Request.TemplateRelativePath = config.TemplateRelativePath; // Just use the entire ConfigData as the model, but in theory // configData could contain many objects or values to set on // template properties this.Model = config.ConfigData as TModel; } to set up a strongly typed Model and the Request object. You can do much more complex hookups here of course and create complex base template pages that contain all the objects that you need in your code with strong typing. Adding a Bin folder to your Template’s Root Path Including templates in your host project works if you own the project and you’re the only one modifying the templates. However, if you are distributing the Razor engine as a templating/scripting solution as part of your application or development tool the original project is likely not available and so that approach is not practical. Another option you have is to add a Bin folder and add all the related assemblies into it. You can also add a Web.Config file with assembly references for any GAC’d assembly references that need to be associated with the templates. Between the web.config and bin folder Visual Studio can figure out how to provide IntelliSense. The Bin folder should contain: The RazorHosting.dll Your host project’s EXE or DLL – renamed to .dll if it’s an .exe Any external (bin folder) dependent assemblies Note that you most likely also want a reference to the host project if it contains references that are going to be used in templates. Visual Studio doesn’t recognize an EXE reference so you have to rename the EXE to DLL to make it work. Apparently the binary signature of EXE and DLL files are identical and it just works – learn something new everyday… For GAC assembly references you can add a web.config file to your template root. The Web.config file then should contain any full assembly references to GAC components: <configuration> <system.web> <compilation debug="true"> <assemblies> <add assembly="System.Web.Mvc, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> <add assembly="System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> <add assembly="System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> </assemblies> </compilation> </system.web> </configuration> And with that you should get full IntelliSense. Note that if you add a BIN folder and you also have the templates in your Visual Studio project Visual Studio will complain about reference conflicts as it’s effectively seeing both the project references and the ones in the bin folder. So it’s probably a good idea to use one or the other but not both at the same time :-) Seeing IntelliSense in your Razor templates is a big help for users of your templates. If you’re shipping an application level scripting solution especially it’ll be real useful for your template consumers/users to be able to get some quick help on creating customized templates – after all that’s what templates are all about – easy customization. Making sure that everything is referenced in your bin folder and web.config is a good idea and it’s great to see that Visual Studio (and presumably WebMatrix/Visual Web Developer as well) will be able to pick up your custom IntelliSense in Razor templates.© Rick Strahl, West Wind Technologies, 2005-2011Posted in Razor

Read the article

C#: Why Decorate When You Can Intercept

- by James Michael Hare

We've all heard of the old Decorator Design Pattern (here) or used it at one time or another either directly or indirectly. A decorator is a class that wraps a given abstract class or interface and presents the same (or a superset) public interface but "decorated" with additional functionality. As a really simplistic example, consider the System.IO.BufferedStream, it itself is a descendent of System.IO.Stream and wraps the given stream with buffering logic while still presenting System.IO.Stream's public interface: 1: Stream buffStream = new BufferedStream(rawStream); Now, let's take a look at a custom-code example. Let's say that we have a class in our data access layer that retrieves a list of products from a database: 1: // a class that handles our CRUD operations for products 2: public class ProductDao 3: { 4: ... 5: 6: // a method that would retrieve all available products 7: public IEnumerable<Product> GetAvailableProducts() 8: { 9: var results = new List<Product>(); 10: 11: // must create the connection 12: using (var con = _factory.CreateConnection()) 13: { 14: con.ConnectionString = _productsConnectionString; 15: con.Open(); 16: 17: // create the command 18: using (var cmd = _factory.CreateCommand()) 19: { 20: cmd.Connection = con; 21: cmd.CommandText = _getAllProductsStoredProc; 22: cmd.CommandType = CommandType.StoredProcedure; 23: 24: // get a reader and pass back all results 25: using (var reader = cmd.ExecuteReader()) 26: { 27: while(reader.Read()) 28: { 29: results.Add(new Product 30: { 31: Name = reader["product_name"].ToString(), 32: ... 33: }); 34: } 35: } 36: } 37: } 38: 39: return results; 40: } 41: } Yes, you could use EF or any myriad other choices for this sort of thing, but the germaine point is that you have some operation that takes a non-trivial amount of time. What if, during the production day I notice that my application is performing slowly and I want to see how much of that slowness is in the query versus my code. Well, I could easily wrap the logic block in a System.Diagnostics.Stopwatch and log the results to log4net or other logging flavor of choice: 1: // a class that handles our CRUD operations for products 2: public class ProductDao 3: { 4: private static readonly ILog _log = LogManager.GetLogger(typeof(ProductDao)); 5: ... 6: 7: // a method that would retrieve all available products 8: public IEnumerable<Product> GetAvailableProducts() 9: { 10: var results = new List<Product>(); 11: var timer = Stopwatch.StartNew(); 12: 13: // must create the connection 14: using (var con = _factory.CreateConnection()) 15: { 16: con.ConnectionString = _productsConnectionString; 17: 18: // and all that other DB code... 19: ... 20: } 21: 22: timer.Stop(); 23: 24: if (timer.ElapsedMilliseconds > 5000) 25: { 26: _log.WarnFormat("Long query in GetAvailableProducts() took {0} ms", 27: timer.ElapsedMillseconds); 28: } 29: 30: return results; 31: } 32: } In my eye, this is very ugly. It violates Single Responsibility Principle (SRP), which says that a class should only ever have one responsibility, where responsibility is often defined as a reason to change. This class (and in particular this method) has two reasons to change: If the method of retrieving products changes. If the method of logging changes. Well, we could “simplify” this using the Decorator Design Pattern (here). If we followed the pattern to the letter, we'd need to create a base decorator that implements the DAOs public interface and forwards to the wrapped instance. So let's assume we break out the ProductDAO interface into IProductDAO using your refactoring tool of choice (Resharper is great for this). Now, ProductDao will implement IProductDao and get rid of all logging logic: 1: public class ProductDao : IProductDao 2: { 3: // this reverts back to original version except for the interface added 4: } 5: And we create the base Decorator that also implements the interface and forwards all calls: 1: public class ProductDaoDecorator : IProductDao 2: { 3: private readonly IProductDao _wrappedDao; 4: 5: // constructor takes the dao to wrap 6: public ProductDaoDecorator(IProductDao wrappedDao) 7: { 8: _wrappedDao = wrappedDao; 9: } 10: 11: ... 12: 13: // and then all methods just forward their calls 14: public IEnumerable<Product> GetAvailableProducts() 15: { 16: return _wrappedDao.GetAvailableProducts(); 17: } 18: } This defines our base decorator, then we can create decorators that add items of interest, and for any methods we don't decorate, we'll get the default behavior which just forwards the call to the wrapper in the base decorator: 1: public class TimedThresholdProductDaoDecorator : ProductDaoDecorator 2: { 3: private static readonly ILog _log = LogManager.GetLogger(typeof(TimedThresholdProductDaoDecorator)); 4: 5: public TimedThresholdProductDaoDecorator(IProductDao wrappedDao) : 6: base(wrappedDao) 7: { 8: } 9: 10: ... 11: 12: public IEnumerable<Product> GetAvailableProducts() 13: { 14: var timer = Stopwatch.StartNew(); 15: 16: var results = _wrapped.GetAvailableProducts(); 17: 18: timer.Stop(); 19: 20: if (timer.ElapsedMilliseconds > 5000) 21: { 22: _log.WarnFormat("Long query in GetAvailableProducts() took {0} ms", 23: timer.ElapsedMillseconds); 24: } 25: 26: return results; 27: } 28: } Well, it's a bit better. Now the logging is in its own class, and the database logic is in its own class. But we've essentially multiplied the number of classes. We now have 3 classes and one interface! Now if you want to do that same logging decorating on all your DAOs, imagine the code bloat! Sure, you can simplify and avoid creating the base decorator, or chuck it all and just inherit directly. But regardless all of these have the problem of tying the logging logic into the code itself. Enter the Interceptors. Things like this to me are a perfect example of when it's good to write an Interceptor using your class library of choice. Sure, you could design your own perfectly generic decorator with delegates and all that, but personally I'm a big fan of Castle's Dynamic Proxy (here) which is actually used by many projects including Moq. What DynamicProxy allows you to do is intercept calls into any object by wrapping it with a proxy on the fly that intercepts the method and allows you to add functionality. Essentially, the code would now look like this using DynamicProxy: 1: // Note: I like hiding DynamicProxy behind the scenes so users 2: // don't have to explicitly add reference to Castle's libraries. 3: public static class TimeThresholdInterceptor 4: { 5: // Our logging handle 6: private static readonly ILog _log = LogManager.GetLogger(typeof(TimeThresholdInterceptor)); 7: 8: // Handle to Castle's proxy generator 9: private static readonly ProxyGenerator _generator = new ProxyGenerator(); 10: 11: // generic form for those who prefer it 12: public static object Create<TInterface>(object target, TimeSpan threshold) 13: { 14: return Create(typeof(TInterface), target, threshold); 15: } 16: 17: // Form that uses type instead 18: public static object Create(Type interfaceType, object target, TimeSpan threshold) 19: { 20: return _generator.CreateInterfaceProxyWithTarget(interfaceType, target, 21: new TimedThreshold(threshold, level)); 22: } 23: 24: // The interceptor that is created to intercept the interface calls. 25: // Hidden as a private inner class so not exposing Castle libraries. 26: private class TimedThreshold : IInterceptor 27: { 28: // The threshold as a positive timespan that triggers a log message. 29: private readonly TimeSpan _threshold; 30: 31: // interceptor constructor 32: public TimedThreshold(TimeSpan threshold) 33: { 34: _threshold = threshold; 35: } 36: 37: // Intercept functor for each method invokation 38: public void Intercept(IInvocation invocation) 39: { 40: // time the method invocation 41: var timer = Stopwatch.StartNew(); 42: 43: // the Castle magic that tells the method to go ahead 44: invocation.Proceed(); 45: 46: timer.Stop(); 47: 48: // check if threshold is exceeded 49: if (timer.Elapsed > _threshold) 50: { 51: _log.WarnFormat("Long execution in {0} took {1} ms", 52: invocation.Method.Name, 53: timer.ElapsedMillseconds); 54: } 55: } 56: } 57: } Yes, it's a bit longer, but notice that: This class ONLY deals with logging long method calls, no DAO interface leftovers. This class can be used to time ANY class that has an interface or virtual methods. Personally, I like to wrap and hide the usage of DynamicProxy and IInterceptor so that anyone who uses this class doesn't need to know to add a Castle library reference. As far as they are concerned, they're using my interceptor. If I change to a new library if a better one comes along, they're insulated. Now, all we have to do to use this is to tell it to wrap our ProductDao and it does the rest: 1: // wraps a new ProductDao with a timing interceptor with a threshold of 5 seconds 2: IProductDao dao = TimeThresholdInterceptor.Create<IProductDao>(new ProductDao(), 5000); Automatic decoration of all methods! You can even refine the proxy so that it only intercepts certain methods. This is ideal for so many things. These are just some of the interceptors we've dreamed up and use: Log parameters and returns of methods to XML for auditing. Block invocations to methods and return default value (stubbing). Throw exception if certain methods are called (good for blocking access to deprecated methods). Log entrance and exit of a method and the duration. Log a message if a method takes more than a given time threshold to execute. Whether you use DynamicProxy or some other technology, I hope you see the benefits this adds. Does it completely eliminate all need for the Decorator pattern? No, there may still be cases where you want to decorate a particular class with functionality that doesn't apply to the world at large. But for all those cases where you are using Decorator to add functionality that's truly generic. I strongly suggest you give this a try!

Read the article

Changing an HTML Form's Target with jQuery

- by Rick Strahl

This is a question that comes up quite frequently: I have a form with several submit or link buttons and one or more of the buttons needs to open a new Window. How do I get several buttons to all post to the right window? If you're building ASP.NET forms you probably know that by default the Web Forms engine sends button clicks back to the server as a POST operation. A server form has a <form> tag which expands to this: <form method="post" action="default.aspx" id="form1"> Now you CAN change the target of the form and point it to a different window or frame, but the problem with that is that it still affects ALL submissions of the current form. If you multiple buttons/links and they need to go to different target windows/frames you can't do it easily through the <form runat="server"> tag. Although this discussion uses ASP.NET WebForms as an example, realistically this is a general HTML problem although likely more common in WebForms due to the single form metaphor it uses. In ASP.NET MVC for example you'd have more options by breaking out each button into separate forms with its own distinct target tag. However, even with that option it's not always possible to break up forms - for example if multiple targets are required but all targets require the same form data to the be posted. A common scenario here is that you might have a button (or link) that you click where you still want some server code to fire but at the end of the request you actually want to display the content in a new window. A common operation where this happens is report generation: You click a button and the server generates a report say in PDF format and you then want to display the PDF result in a new window without killing the content in the current window. Assuming you have other buttons on the same Page that need to post to base window how do you get the button click to go to a new window? Can't you just use a LinkButton or other Link Control? At first glance you might think an easy way to do this is to use an ASP.NET LinkButton to do this - after all a LinkButton creates a hyper link that CAN accept a target and it also posts back to the server, right? However, there's no Target property, although you can set the target HTML attribute easily enough. Code like this looks reasonable: <asp:LinkButton runat="server" ID="btnNewTarget" Text="New Target" target="_blank" OnClick="bnNewTarget_Click" /> But if you try this you'll find that it doesn't work. Why? Because ASP.NET creates postbacks with JavaScript code that operates on the current window/frame: <a id="btnNewTarget" target="_blank" href="javascript:__doPostBack('btnNewTarget','')">New Target</a> What happens with a target tag is that before the JavaScript actually executes a new window is opened and the focus shifts to the new window. The new window of course is empty and has no __doPostBack() function nor access to the old document. So when you click the link a new window opens but the window remains blank without content - no server postback actually occurs. Natch that idea. Setting the Form Target for a Button Control or LinkButton So, in order to send Postback link controls and buttons to another window/frame, both require that the target of the form gets changed dynamically when the button or link is clicked. Luckily this is rather easy to do however using a little bit of script code and jQuery. Imagine you have two buttons like this that should go to another window: <asp:LinkButton runat="server" ID="btnNewTarget" Text="New Target" OnClick="ClickHandler" /> <asp:Button runat="server" ID="btnButtonNewTarget" Text="New Target Button" OnClick="ClickHandler" /> ClickHandler in this case is any routine that generates the output you want to display in the new window. Generally this output will not come from the current page markup but is generated externally - like a PDF report or some report generated by another application component or tool. The output generally will be either generated by hand or something that was generated to disk to be displayed with Response.Redirect() or Response.TransmitFile() etc. Here's the dummy handler that just generates some HTML by hand and displays it: protected void ClickHandler(object sender, EventArgs e) { // Perform some operation that generates HTML or Redirects somewhere else Response.Write("Some custom output would be generated here (PDF, non-Page HTML etc.)"); // Make sure this response doesn't display the page content // Call Response.End() or Response.Redirect() Response.End(); } To route this oh so sophisticated output to an alternate window for both the LinkButton and Button Controls, you can use the following simple script code: <script type="text/javascript"> $("#btnButtonNewTarget,#btnNewTarget").click(function () { $("form").attr("target", "_blank"); }); </script> So why does this work where the target attribute did not? The difference here is that the script fires BEFORE the target is changed to the new window. When you put a target attribute on a link or form the target is changed as the very first thing before the link actually executes. IOW, the link literally executes in the new window when it's done this way. By attaching a click handler, though we're not navigating yet so all the operations the script code performs (ie. __doPostBack()) and the collection of Form variables to post to the server all occurs in the current page. By changing the target from within script code the target change fires as part of the form submission process which means it runs in the correct context of the current page. IOW - the input for the POST is from the current page, but the output is routed to a new window/frame. Just what we want in this scenario. Voila you can dynamically route output to the appropriate window.© Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET HTML jQuery

Read the article

The Red Gate and .NET Reflector Debacle

- by Rick Strahl

About a month ago Red Gate – the company who owns the NET Reflector tool most .NET devs use at one point or another – decided to change their business model for Reflector and take the product from free to a fully paid for license model. As a bit of history: .NET Reflector was originally created by Lutz Roeder as a free community tool to inspect .NET assemblies. Using Reflector you can examine the types in an assembly, drill into type signatures and quickly disassemble code to see how a particular method works. In case you’ve been living under a rock and you’ve never looked at Reflector, here’s what it looks like drilled into an assembly from disk with some disassembled source code showing: Note that you get tons of information about each element in the tree, and almost all related types and members are clickable both in the list and source view so it’s extremely easy to navigate and follow the code flow even in this static assembly only view. For many year’s Lutz kept the the tool up to date and added more features gradually improving an already amazing tool and making it better. Then about two and a half years ago Red Gate bought the tool from Lutz. A lot of ruckus and noise ensued in the community back then about what would happen with the tool and… for the most part very little did. Other than the incessant update notices with prominent Red Gate promo on them life with Reflector went on. The product didn’t die and and it didn’t go commercial or to a charge model. When .NET 4.0 came out it still continued to work mostly because the .NET feature set doesn’t drastically change how types behave. Then a month back Red Gate started making noise about a new Version Version 7 which would be commercial. No more free version - and a shit storm broke out in the community. Now normally I’m not one to be critical of companies trying to make money from a product, much less for a product that’s as incredibly useful as Reflector. There isn’t day in .NET development that goes by for me where I don’t fire up Reflector. Whether it’s for examining the innards of the .NET Framework, checking out third party code, or verifying some of my own code and resources. Even more so recently I’ve been doing a lot of Interop work with a non-.NET application that needs to access .NET components and Reflector has been immensely valuable to me (and my clients) if figuring out exact type signatures required to calling .NET components in assemblies. In short Reflector is an invaluable tool to me. Ok, so what’s the problem? Why all the fuss? Certainly the $39 Red Gate is trying to charge isn’t going to kill any developer. If there’s any tool in .NET that’s worth $39 it’s Reflector, right? Right, but that’s not the problem here. The problem is how Red Gate went about moving the product to commercial which borders on the downright bizarre. It’s almost as if somebody in management wrote a slogan: “How can we piss off the .NET community in the most painful way we can?” And that it seems Red Gate has a utterly succeeded. People are rabid, and for once I think that this outrage isn’t exactly misplaced. Take a look at the message thread that Red Gate dedicated from a link off the download page. Not only is Version 7 going to be a paid commercial tool, but the older versions of Reflector won’t be available any longer. Not only that but older versions that are already in use also will continually try to update themselves to the new paid version – which when installed will then expire unless registered properly. There have also been reports of Version 6 installs shutting themselves down and failing to work if the update is refused (I haven’t seen that myself so not sure if that’s true). In other words Red Gate is trying to make damn sure they’re getting your money if you attempt to use Reflector. There’s a lot of temptation there. Think about the millions of .NET developers out there and all of them possibly upgrading – that’s a nice chunk of change that Red Gate’s sitting on. Even with all the community backlash these guys are probably making some bank right now just because people need to get life to move on. Red Gate also put up a Feedback link on the download page – which not surprisingly is chock full with hate mail condemning the move. Oddly there’s not a single response to any of those messages by the Red Gate folks except when it concerns license questions for the full version. It puzzles me what that link serves for other yet than another complete example of failure to understand how to handle customer relations. There’s no doubt that that all of this has caused some serious outrage in the community. The sad part though is that this could have been handled so much less arrogantly and without pissing off the entire community and causing so much ill-will. People are pissed off and I have no doubt that this negative publicity will show up in the sales numbers for their other products. I certainly hope so. Stupidity ought to be painful! Why do Companies do boneheaded stuff like this? Red Gate’s original decision to buy Reflector was hotly debated but at that the time most of what would happen was mostly speculation. But I thought it was a smart move for any company that is in need of spreading its marketing message and corporate image as a vendor in the .NET space. Where else do you get to flash your corporate logo to hordes of .NET developers on a regular basis? Exploiting that marketing with some goodwill of providing a free tool breeds positive feedback that hopefully has a good effect on the company’s visibility and the products it sells. Instead Red Gate seems to have taken exactly the opposite tack of corporate bullying to try to make a quick buck – and in the process ruined any community goodwill that might have come from providing a service community for free while still getting valuable marketing. What’s so puzzling about this boneheaded escapade is that the company doesn’t need to resort to underhanded tactics like what they are trying with Reflector 7. The tools the company makes are very good. I personally use SQL Compare, Sql Data Compare and ANTS Profiler on a regular basis and all of these tools are essential in my toolbox. They certainly work much better than the tools that are in the box with Visual Studio. Chances are that if Reflector 7 added useful features I would have been more than happy to shell out my $39 to upgrade when the time is right. It’s Expensive to give away stuff for Free At the same time, this episode shows some of the big problems that come with ‘free’ tools. A lot of organizations are realizing that giving stuff away for free is actually quite expensive and the pay back is often very intangible if any at all. Those that rely on donations or other voluntary compensation find that they amount contributed is absolutely miniscule as to not matter at all. Yet at the same time I bet most of those clamouring the loudest on that Red Gate Reflector feedback page that Reflector won’t be free anymore probably have NEVER made a donation to any open source project or free tool ever. The expectation of Free these days is just too great – which is a shame I think. There’s a lot to be said for paid software and having somebody to hold to responsible to because you gave them some money. There’s an incentive –> payback –> responsibility model that seems to be missing from free software (not all of it, but a lot of it). While there certainly are plenty of bad apples in paid software as well, money tends to be a good motivator for people to continue working and improving products. Reasons for giving away stuff are many but often it’s a naïve desire to share things when things are simple. At first it might be no problem to volunteer time and effort but as products mature the fun goes out of it, and as the reality of product maintenance kicks in developers want to get something back for the time and effort they’re putting in doing non-glamorous work. It’s then when products die or languish and this is painful for all to watch. For Red Gate however, I think there was always a pretty good payback from the Reflector acquisition in terms of marketing: Visibility and possible positioning of their products although they seemed to have mostly ignored that option. On the other hand they started this off pretty badly even 2 and a half years back when they aquired Reflector from Lutz with the same arrogant attitude that is evident in the latest episode. You really gotta wonder what folks are thinking in management – the sad part is from advance emails that were circulating, they were fully aware of the shit storm they were inciting with this and I suspect they are banking on the sheer numbers of .NET developers to still make them a tidy chunk of change from upgrades… Alternatives are coming For me personally the single license isn’t a problem, but I actually have a tool that I sell (an interop Web Service proxy generation tool) to customers and one of the things I recommend to use with has been Reflector to view assembly information and to find which Interop classes to instantiate from the non-.NET environment. It’s been nice to use Reflector for this with its small footprint and zero-configuration installation. But now with V7 becoming a paid tool that option is not going to be available anymore. Luckily it looks like the .NET community is jumping to it and trying to fill the void. Amidst the Red Gate outrage a new library called ILSpy has sprung up and providing at least some of the core functionality of Reflector with an open source library. It looks promising going forward and I suspect there will be a lot more support and interest to support this project now that Reflector has gone over to the ‘dark side’…© Rick Strahl, West Wind Technologies, 2005-2011

Search Results

Search found 23792 results on 952 pages for 'void pointers'.

Page 920/952 | < Previous Page | 916 917 918 919 920 921 922 923 924 925 926 927 | Next Page >

- by Alois Kraus

- by dwahlin

- by Rohit Gupta

- by imran_ku07

- by Dixin

- by nmarun

- by DigiMortal

- by nmarun

- by Rick Strahl

- by nikolaosk

- by PyRulez

- by Bruce Eitman

- by Alois Kraus

- by Kelly Jones

- by nmarun

- by Ricardo Ferreira

- by Jesse Taber

- by Rick Strahl

- by heavymark

- by Rick Strahl

- by James Michael Hare

- by Rick Strahl

- by Rick Strahl

< Previous Page | 916 917 918 919 920 921 922 923 924 925 926 927 | Next Page >