Search Results

Search found 32492 results on 1300 pages for 'reporting database'.

Page 922/1300 | < Previous Page | 918 919 920 921 922 923 924 925 926 927 928 929  | Next Page >

• Best practice for scaling a single application source to multiple nodes

  - by Andrew Waters

  I have an application which needs to scale horizontally to cover web and service nodes (at the moment they're all on one) but interact with the same set of databases and source files (both application code and custom assets). Database is no problem, it's handled already with replication in MongoDB. Also, the configuration of the servers are the same (100% linux). This question is literally about sharing a filesystem between machines so that its content is always correct, regardless of the node accessing it. My two thoughts have so far been NFS and SAN - SAN being prohibitively expensive and NFS seeing some performance issues on the second node with regards to glob()ing in PHP. Does anyone have recommended strategies or other techniques that don't involved sharding data across nodes or any potential gotchas in NFS that may cause slow disk seek times? To give you an idea of the scale, the main node initialises it's application modules in ~ 0.01 seconds. The secondary is taking ~2.2 seconds. They're VM's inside a local virtual network in ESXi and ping time between them is ~0.3ms

  Read the article

• automating sql express backup via VSS backup

  - by Ornus

  I need to set up on my server automated daily SQL db backups (sql express, so no maintenance plans). To keep things simple I'm gonna use a backup solution (JungleDisk) that uses VSS to back up the DB file. SQL fully supports VSS and on requests freezes DB I/O, so I understand I'm taking snapshots. JungleDisk supports doing differential back up and compression, so it simplifies things and keeps the cost/bandwidth down. Is it enough to just backup up db file (mdf). Do I need to back up transaction log (ldf) file as well? I'm ok with losing a day's worth of work (since the last backup). if I go this route, what's the best way to restore the database? are there any issues with this approach I'm not aware of?

  Read the article

• txt file descriptor in lsof

  - by wfaulk

  In my experience, files that have the file descriptor of txt in lsof output are the executable file itself and shared objects. The lsof man page says that it means "program text (code and data)". While debugging a problem, I found a large number of data files (specifically, ElasticSearch database index files) that lsof reported as txt. These are definitely not executable files. The process was ElasticSearch itself, which is a java process, if that helps point someone in the right direction. I want to understand how this process is opening and using these files that gets it to be reported in this way. I'm trying to understand some memory utilization, and I suspect that these open files are related to some metrics I'm seeing in some way. The system is Solaris 10 x86.

  Read the article

• How are SQL Server CALs counted?

  - by Sam

  Running a SQL Server, as far as I understand it, you need one CAL for every user who connects to the database server. But what happens if the only computer which is accessing the SQL Server is the server running your business layer? If, for example, you got 1 SQL Server and 1 Business logic server, and 100 Clients who all just query and use the business logic server. No client is using the SQL Server directly, no one is even allowed to contact it. So, since there is only one computer using the SQL server, do I need only 1 CAL??? I somehow can't believe this would count as only 1 CAL needed for the SQL Server, but I would like to know why not.

  Read the article

• Open Source Visualization and Dashboard Software

  - by helios

  I am working on an open source Application Performance Monitoring (APM) software and looking for a visualization tool with dashboard capabilities. I came across Graphite which looks pretty good but wondering if there is anything better out there before I settle down with that tool. Here's the list of features I am interested in: Must-Have Open Source license API to submit real time data Web-based visualization interface Persistence - file or database Nice-To-Have Dashboard Capabilities: Allow users to select a few metrics (CPU, Heap Usage, # of Active Users etc.) and place them on a single page for easier monitoring. Any suggestions?

  Read the article

• MOSS 2007 Sharepoint Shared Services AD Import SQL/Search Error prevents user import

  - by TrevJen

  When attempting to import new AD users (Shared Services Administration Shared Service User Profiles and Properties) I receive an error on the top of the User Profiles and Properties page. "An error has occurred while accessing the SQL Server database or the Office SharePoint Server Search service. If this is the first time you have seen this message, try again later. If this problem persists, contact your administrator." I have tried the following: Rebooted server Checked service account permissions and passwords Checked the MIPSCHEDULEDJOB table to ensure all 6 required entries are there.

  Read the article

• Is there a way to insert a formatted calculation into Excel 2010 without using an image?

  - by Ryan Taylor

  I am maintaining a list of database column names, notes, and their calculations in an Excel 2010 spreadsheet. The calculations are included so as to document how to derive the values for the various columns and not for calculations within the spreadsheet. I have been entering the calculations into the cells simply as unformatted text like so: 100 - ((FiscalYearRegionConsumption - BaselineRegionConsumption) / (GoalRegionConsumption - BaselineRegionConsumption)) * 100 However, for long and/or complex calculations this could become rather unreadable. To improve readability and comprehension I would like to "pretty" print the calculation in an Excel cell. This would result in formatting that would like like this: The only solution I have come up with is to: Write the calculation in another application such as Word Take a screenshot of said calculation Past the screenshot into Excel The primary concern with this approach is maintenance. Should the calculation change or need correction I have to update two different sources of information. Is there a better way included a formatted calculation into an Excel cell?

  Read the article

• PostgreSQL disaster recovery options

  - by Alex

  My customer has quite a large (the total "data" folder size is 200G) PostgreSQL database and we are working on a disaster recovery plan. We have identified three different types of disasters so far: hardware outage, too much load and unintentional data loss due to erroneously executed bad migration (like DELETE or ALTER TABLE DROP COLUMN). First two types seem to be easy to mitigate but we can't elaborate a good mitigation plan for the third type. I proposed to use ZFS and frequent (hourly) snapshots but "ZFS" means "OpenIndiana" these days and our Ops engineers do not have much expertise in it, so using OpenIndiana imposes another risk. Colleagues try to convince me that restoring from PostgreSQL PITR backup can be as fast as restoring from a ZFS snapshot but I highly doubt that replaying, say, 50G of archived WALs can be considered "fast". What other options are we missing? Is ZFS an only viable alternative? Can we get a fast Pg DB restore time in the Linux environment?

  Read the article

• Daily Weekly and Monthly DB backup with logrotate?

  - by benjisail

  I am currently keeping daily backup of my database by doing a daily mysqldump and by using logrotate to keep the 7 last days of mysqldump. I would like to improve this backup process to keep 7 daily backup, 3 weekly backups and 12 monthly backup. I found this article which explain how to di this with logrotate : http://www.hotcoding.com/os/sysadmin/35751.html However I am using the dateext logrotate option to name my backup files so I cannot use this solution. How can I do daily, weekly and monthly backup with logrotate and with the dateext option?

  Read the article

• Outlook 2007 Clients attachments not opening correctly

  - by Az

  Hello, Thanks for taking the time to read this. We are having an issue on our Terminal Server clients that has me perplexed. We are running Server2003 x64 and Exchange 2007 environment. When we attempt to open an attachment for example .jpeg and the user selects to open the file, it prompts them to select a program to open the file with. The file associations apear to be fine, if I save the document to the desktop and open it, it opens with the correct program automatically. If i select "always open using this program" it will then open automatically, but I don't want to have to do this for all file types we open regularly on each client. Is this some sort of Exchange server security setting that is forcing them to associate the file? Does outlook or exchange maintain its own file association database? Thanks for reading!

  Read the article

• MySql calculate number of connections needed

  - by Udi I

  I am trying to figure my needs regarding web service hosting. After trying Azure I have realized that the default MySql they provide (through a third party) limits the account to 4 connections. You can then upgrade the account to 15, 30 or 40 connections (which is quite expensive). Their 15 connections plan is descirbed as: "Excellent choice for light test and staging apps that need a reliable MySQL database". I have 2 questions: if my application is a web service which needs to preform ~120k Queries a day (Normal/BELL distribution) and each query is ~150ms(duration)/~400ms(fetch), how many connection do I need? If instead of using cloud computing, I will choose a VPS, how many connections will I be able to handle on a 1GB 2 cores VPS? Thank you!

  Read the article

• What is the simplest and fastest way to transfer large file through a Windows network?

  - by Sake

  I have a Window Server 2000 machine running MS SQL Server that stores over 20GB of data. The database is backed-up every day to the second harddrive. I want to transfer those backup files to another computer to build another test server and for recovery practicing. (the backup never actually got restored for almost 5 years. Don't tell my boss about that!) I have trouble transfering that huge file through the network. I've tried plain network copy, apache download, and ftp. Any method I tried end up failing when the amount of data transfered reach 2GB. The last time that I successfully transfered the file, it was through a usb attached external harddrive. But I want to perform this task routinely and preferably automatically. Wonder what is the most pragmatic approach for this situation ?

  Read the article

• How to get a maximum file size of VZFS parition?

  - by Nulldevice

  I have a VPS hosting with a VZFS file system. How can I determine maximum file size of VZFS partition? UPD: Free space (or total space) is not what i need. Sometimes file cannot occupy a hole partition volume - fat16 with 2Gb limit is a good example. I need to use a large database file (say, 64Gb) and so I need to know if a file system of VPS hosting will cope with it. It is easy to calculate for an ext3 filesystem using tune2fs, but VPS uses VSFS by Virtuozzo, and it is documented bad. Is it any generic way to calculate maximum file size for some filesystem in linux?

  Read the article

• PHPMyAdmin - Can I view actual field values instead of the foreign keys?

  - by Callum

  I have a database with some MyISAM tables. The tables contain foreign key relationships, but they are not inherently "enforced" (I believe "referential integrity" is the term). Using PHPMyAdmin, what I'd like to do is be able to view records from the tables but have all foreign keys replaced by whatever value they are representing. Eg, instead of seeing: 23 | 14 | $6.50 I'd like to see.. Extra Large | Thin Crust | $6.50 ($6.50 would be an editable field, the first two fields would not be). Any helpers? Thanks.

  Read the article

• How to address an EC2 instance from both inside and outside datacenter?

  - by Alexandr Kurilin

  I'm trying to find a good way of being able to address my EC2 database instance from both inside and outside of the datacenter. Other EC2 instances need to be able to call into it, and other clients like pgAdmin might need to connect to it from the outside world as well. It's my understanding that using the internal and external DNS names is sustainable long term as each reboot leads to a change. I'm thinking of associating an Elastic IP with the instance and giving it an A record (say db1.mydomain.com) which I then will use both within and outside the datacenter. Further instances in the same role will get the same treatment and a DNS record of db2.mydomain.com etc. Now, is there a cleaner and more stable way of achieving this result? Am going about this the wrong way? Suggestions?

  Read the article

• KB2667402 update fails to install with 0x80004005. Yet it's also showing as installed

  - by growse

  I've got 15 Windows 2008 R2 x64 servers that I manage with SCCM2012. I've noticed during my Windows updates reporting that there's two boxes that are showing as 'error' for total updates installed. Digging around, it looks like the update that is failing to install is KB2667402. The Software Centre on the server itself shows the following: The software change returned error code 0x80004005(-2147467259). So SCCM thinks it hasn't installed the update. However, if I go to the Programs and Features application and select 'Windows Updates', I can see an entry for KB2667402: If I try and uninstall this, I get an error: An error occurred. Not all of the updates were successfully uninstalled If I try and download the patch from Microsoft directly, I get the same error installing as displayed in Software Centre. The only odd thing about this setup that I can think would affect this is that I run the RDP service on a non-standard port. However, I do this across all the servers, so it seems odd that it would fail on just 2 out of 15. The tail of the WindowsUpdate.log file is below: 2012-06-26 15:33:53:184 3924 1608 COMAPI ------------- 2012-06-26 15:33:53:190 3924 1608 COMAPI -- START -- COMAPI: Install [ClientId = CcmExec] 2012-06-26 15:33:53:190 3924 1608 COMAPI --------- 2012-06-26 15:33:53:190 3924 1608 COMAPI - Allow source prompts: No; Forced: No; Force quiet: Yes 2012-06-26 15:33:53:190 3924 1608 COMAPI - Updates in request: 1 2012-06-26 15:33:53:190 3924 1608 COMAPI - ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed 2012-06-26 15:33:53:199 860 1198 Agent ************* 2012-06-26 15:33:53:199 860 1198 Agent ** START ** Agent: Installing updates [CallerId = CcmExec] 2012-06-26 15:33:53:199 860 1198 Agent ********* 2012-06-26 15:33:53:199 860 1198 Agent * Updates to install = 1 2012-06-26 15:33:53:201 860 1198 Agent * Title = Security Update for Windows Server 2008 R2 x64 Edition (KB2667402) 2012-06-26 15:33:53:201 860 1198 Agent * UpdateId = {48859BE4-1331-4CD2-8E70-3B537180A0D0}.103 2012-06-26 15:33:53:201 860 1198 Agent * Bundles 1 updates: 2012-06-26 15:33:53:201 860 1198 Agent * {D854ECF1-99A7-4D67-B435-2D041BF79565}.103 2012-06-26 15:33:53:204 3924 1608 COMAPI - Updates to install = 1 2012-06-26 15:33:53:204 3924 1608 COMAPI <<-- SUBMITTED -- COMAPI: Install [ClientId = CcmExec] 2012-06-26 15:33:53:221 860 1198 Agent WARNING: failed to calculate prior restore point time with error 0x80070002; setting restore point 2012-06-26 15:33:53:222 860 1198 Agent WARNING: LoadLibrary failed for srclient.dll with hr:8007007e 2012-06-26 15:33:53:322 860 1198 DnldMgr Preparing update for install, updateId = {D854ECF1-99A7-4D67-B435-2D041BF79565}.103. 2012-06-26 15:33:53:325 5700 117c Misc =========== Logging initialized (build: 7.5.7601.17514, tz: +0100) =========== 2012-06-26 15:33:53:325 5700 117c Misc = Process: C:\Windows\system32\wuauclt.exe 2012-06-26 15:33:53:325 5700 117c Misc = Module: C:\Windows\system32\wuaueng.dll 2012-06-26 15:33:53:324 5700 117c Handler ::::::::::::: 2012-06-26 15:33:53:325 5700 117c Handler :: START :: Handler: CBS Install 2012-06-26 15:33:53:325 5700 117c Handler ::::::::: 2012-06-26 15:33:53:330 5700 117c Handler Starting install of CBS update D854ECF1-99A7-4D67-B435-2D041BF79565 2012-06-26 15:33:53:342 5700 117c Handler CBS package identity: Package_for_KB2667402~31bf3856ad364e35~amd64~~6.1.2.0 2012-06-26 15:33:53:366 5700 117c Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\44059e0415033d6f699a50ef69dd5ff2\windows6.1-kb2667402-v2-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\44059e0415033d6f699a50ef69dd5ff2\inst 2012-06-26 15:33:56:270 5700 3b8 Handler FATAL: CBS called Error with 0x80004005, 2012-06-26 15:33:56:402 5700 117c Handler FATAL: Completed install of CBS update with type=0, requiresReboot=0, installerError=1, hr=0x80004005 2012-06-26 15:33:56:405 5700 117c Handler ::::::::: 2012-06-26 15:33:56:406 5700 117c Handler :: END :: Handler: CBS Install 2012-06-26 15:33:56:406 5700 117c Handler ::::::::::::: 2012-06-26 15:33:56:433 860 1198 Agent ********* 2012-06-26 15:33:56:433 860 1198 Agent ** END ** Agent: Installing updates [CallerId = CcmExec] 2012-06-26 15:33:56:433 860 1198 Agent ************* 2012-06-26 15:33:56:433 860 d14 AU Can not perform non-interactive scan if AU is interactive-only 2012-06-26 15:33:56:450 3924 e40 COMAPI >>-- RESUMED -- COMAPI: Install [ClientId = CcmExec] 2012-06-26 15:33:56:450 3924 e40 COMAPI - Install call complete (succeeded = 0, succeeded with errors = 0, failed = 1, unaccounted = 0) 2012-06-26 15:33:56:450 3924 e40 COMAPI - Reboot required = No 2012-06-26 15:33:56:450 3924 e40 COMAPI - WARNING: Exit code = 0x00000000; Call error code = 0x80240022 2012-06-26 15:33:56:451 3924 e40 COMAPI --------- 2012-06-26 15:33:56:451 3924 e40 COMAPI -- END -- COMAPI: Install [ClientId = CcmExec] 2012-06-26 15:33:56:451 3924 e40 COMAPI ------------- 2012-06-26 15:33:56:536 860 13a4 AU Triggering Offline detection (non-interactive) 2012-06-26 15:33:56:536 860 d14 AU ############# 2012-06-26 15:33:56:536 860 d14 AU ## START ## AU: Search for updates 2012-06-26 15:33:56:536 860 d14 AU ######### 2012-06-26 15:33:56:539 860 d14 AU <<## SUBMITTED ## AU: Search for updates [CallId = {2DBB046C-2265-421B-A37B-93BDECC6C261}] 2012-06-26 15:33:56:539 860 1788 Agent ************* 2012-06-26 15:33:56:539 860 1788 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates] 2012-06-26 15:33:56:539 860 1788 Agent ********* 2012-06-26 15:33:56:539 860 1788 Agent * Online = No; Ignore download priority = No 2012-06-26 15:33:56:539 860 1788 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1" 2012-06-26 15:33:56:539 860 1788 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed 2012-06-26 15:33:56:539 860 1788 Agent * Search Scope = {Machine} 2012-06-26 15:33:58:562 860 1788 Agent * Found 0 updates and 70 categories in search; evaluated appl. rules of 180 out of 1072 deployed entities 2012-06-26 15:33:58:565 860 1788 Agent ********* 2012-06-26 15:33:58:565 860 1788 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates] 2012-06-26 15:33:58:565 860 1788 Agent ************* 2012-06-26 15:33:58:650 860 f2c AU >>## RESUMED ## AU: Search for updates [CallId = {2DBB046C-2265-421B-A37B-93BDECC6C261}] 2012-06-26 15:33:58:650 860 f2c AU # 0 updates detected 2012-06-26 15:33:58:650 860 f2c AU ######### 2012-06-26 15:33:58:650 860 f2c AU ## END ## AU: Search for updates [CallId = {2DBB046C-2265-421B-A37B-93BDECC6C261}] 2012-06-26 15:33:58:650 860 f2c AU ############# 2012-06-26 15:33:58:650 860 f2c AU Featured notifications is disabled. 2012-06-26 15:33:58:651 860 f2c AU Successfully wrote event for AU health state:0 2012-06-26 15:33:58:652 860 f2c AU Successfully wrote event for AU health state:0

  Read the article

• SQL Server plus small files

  - by user1467163

  I have a MSSQL server, 3 volumes, that runs some processes that seem to take way too long. One of these processes reads in a zip file, then writes to a database based on what's in the zip file.... for each record. I have 2 volumes in use and am creating the third- so I am trying to plan how to do this. OS has to remain on vol. 1. The TLogs should probably go on the new volume and the mdf's on the existing vol.2.. Do I put the file store on the volume with the MDF's so they don't interfere with the TLog writes, or with the TLogs so they don't interfere with the TLog flush to the MDFs? I know it's best to have more servers / volumes but I have to make do with whats on hand for now. I appreciate any suggestions.

  Read the article

• MySQL: Auto-increment value: 0 is smaller than max used value: xx

  - by Rhodri

  Increasingly I'm getting tables having to be repaired dwith the message returned of: Auto-increment value: 0 is smaller than max used value: xx This has happened on tables with 200 rows and tables with ~3 million rows, but so far the same few tables have had the problem. I'm running MySQL 5.0.22. The repairs are run by a script which checks every minute for the need to repair MySQL tables. I also have an automated backup of the 6 Gigabyte database running very two hours and the repairs always get trigged around the time of the backup. Any ideas?

  Read the article

• WMV file won't play in Windows Media Player

  - by user1053768

  I have a .wmv file I uploaded to my website. When I click the link to the video, the video plays in Windows Media Player without any problems. However, on some systems when the user clicks the link, Windows Media Player gives them the error: Window Media Player cannot play the file. The player might not support the file type or might not support the codec that was used to compress the file All I did was copy the video to the server and store the URL in a database. Why are users getting this error? How can I fix it?

  Read the article

• Installing software at large organisation

  - by CJ7

  I have to give an MSI to a large organisation for it to install (presumably via GPO) on to some of their workstations that are running XP. I already know that my application is not allowed to write to the application folder. I realise it should be writing to the AppData folder. The organisation has allocated a folder on a server for the database files and other configuration files. This folder is referenced by UNC naming and not by mapped drives. My question is: based on normal practices, is my app likely to have the rights to create a sub-folder on this server? Is my app likely to have the rights to create files on this server?

  Read the article

• Remove postgres from Mac - installed in /usr/local/, can I just delete files?

  - by Richard

  I want to completely uninstall postgres and start from scratch - the version I have is refusing to work with PostGIS 2.0. I have read other answers on how to do this, but none of them seem to fit the way postgres is set up on this machine. I'm not sure postgres was originally installed on this machine - it wasn't via brew or Postgres.app or the EnterpriseDB installer - but it seems to be living in /usr/local: $ which psql /usr/local/pgsql-9.1/bin/psql The postgres binary itself is in /usr/local/var/postgres/. How can I kill it forever? Can I simply go to /usr/local and do rm -rf pgsql-9.1, and the same in /usr/local/var, and make sure there are no paths in my profile file? Or is there more to it than that? From memory I think I'll need to delete the database files too somehow. Thanks for the help.

  Read the article

• Oracle Logical Standby redo generation

  - by DCookie

  Oracle 10.2.0.4 database with a logical standby on Win2K3. Recently a rather large delete operation was carried out on the production instance. I'm experiencing difficulty with the logical standby, in that it gets a couple of hundred (58M size) archive logs into the operation and the apply process fails with an out-of-memory error. Unfortunately, every time it fails it has to restart the apply from the beginning of the transaction. This is taking a couple of days each time. Anyway, in trying to resolve this problem, I've noticed that each archive log from the production system generates 5 or 6 log switches on the standby. I don't understand why this should be. Anyone have any ideas? A related question that I've not found the answer for: does anyone know if the logical standby must be running in archivelog mode? I really don't have a need to keep the logs.

  Read the article

• Is there a software that can index the contents of the registry for quick lookups?

  - by Benoit

  Searching in the Windows registry can be ve------ry------ lo----ng. Is there some tool available that can index the contents of the whole registry, or contents of a single hive, such that fast lookups are available? (for example generating some SQLite database with FTS3 or FTS4 enabled for full text search) Thank you. PS. I don't want RegScanner or tools that perform a new, linear search every time. I want an indexer, with which then a search can be instantaneous. See question comments.

  Read the article

• Cannot access any remote resource after connecting to Cisco VPN on Vista

  - by Deepak Singh Rawat

  I have installed Cisco vpn client version 5.0.07.0290 on Vista Business SP2. I am able to successfully connnect to the vpn. But after connecting I am not able to access any resource in the vpn (like database, other computers in the network etc.). I have tried the following without any success : Older versions of the client Other vpn clients like Shrewsoft : same issue as the cisco vpn client Disabled Internet Connection Sharing service Installed the client in the root administrator account Run the installer as administrator Run the vpngui and ipsecdialer in XP compatibility mode and as administrator I am not sure how to troubleshoot this issue. Can somebody please help me in troubleshooting this issue? P.S : I've Zonealarm firewall, can that be an issue?

  Read the article

• let mysql use full resources

  - by shekhar

  We have a Windows server 2008 R2. It has 24GB RAM and 2.926 Mhz, 8 Core(s), 8 Logical Process. We have a large MySQL database and it's taking a lot of time to execute some queries. But while running queries, I have observed it's NOT utilizing full resources. I am thinking that if I let MySQL utilize maximum resources on my server, it can reduce execution time. How can I let my MySQL server utilize maximum resources in a healthy way?

  Read the article

< Previous Page | 918 919 920 921 922 923 924 925 926 927 928 929  | Next Page >