Search Results

Search found 22532 results on 902 pages for 'computer hardware'.

Page 93/902 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

• Installing Windows 7

  - by M K Rajyana

  I have purchased Windows 7 Ultimate with two DVDs 32 bit & 64 bit with one key. I wish to try 32 bit first & 64 bit later. Can i use same key for 64 bit software later on same computer?

  Read the article

• CUDA driver installation on a laptop with nVidia NVS140M card

  - by stanigator

  I'm trying to first figure out if my computer contains a CUDA-enabled card. It has an nVidia NVS 140M card, but I can't seem to figure out if it is the 128 MB version or 256 MB version. On the laptop purchase receipt, I found out that I ordered the 128 MB version, but the control panel description of the card said otherwise as shown below: When I ran the CUDA driver from nVidia's site, it cannot find a hardware compatible with CUDA (even though the product series is CUDA-enabled, the card does not have 256 MB minimum of memory to do so). What would be your recommendations in this case with trying to use CUDA on this computer (I'm not sure if nothing can be done at this point)? Thanks in advance.

  Read the article

• When gaming computer freezes with a blank screen and a buzzing sound

  - by The Colour Of Heartache

  I have a problem with random freezes when playing games. Sometimes it's fine for hours, other times it dosn't last even one. I tried googling around and I found recomendations to update my graphics drivers and to test for overheating. The graphics drivers haven't helped worked and Furmark created a consistant heat higher than I get during a crash. I even tried running a game using the Linux dual boot and WINE, that crashed too. Here are the tempreture logs leading up to the latest crash. The GPU dosn't hit 80, and I've hit 90 with no crash on firmark. DATE TIME MHz CPU_0 CPU_1 CPU_2 CPU_3 LOAD% GPU 04/05/12 15:21:00 3200.16 63 58 57 56 15.4 77 04/05/12 15:21:05 3200.16 63 59 58 56 15.8 76 04/05/12 15:21:10 3200.16 62 59 58 55 15.1 78 04/05/12 15:21:15 3200.16 63 59 58 56 16.5 77 04/05/12 15:21:20 3200.16 64 58 58 57 15.3 77 04/05/12 15:21:25 3200.16 63 58 59 56 15.8 78 04/05/12 15:21:30 3200.16 63 58 58 57 15.8 77 04/05/12 15:21:35 3200.16 63 58 58 56 17.0 77 04/05/12 15:21:40 3200.16 63 59 59 56 15.9 77 04/05/12 15:21:45 3200.16 63 58 58 58 15.6 77 04/05/12 15:21:50 3200.16 63 58 58 58 15.8 77 04/05/12 15:21:55 3200.16 63 58 59 56 15.9 77 04/05/12 15:22:00 3200.16 63 58 58 57 15.8 77 04/05/12 15:21:05 3200.16 63 58 58 56 15.9 77 04/05/12 15:21:10 3200.16 63 57 58 56 15.3 78 04/05/12 15:21:15 3200.16 64 58 58 56 15.4 78 04/05/12 15:21:20 3200.16 63 58 58 56 15.4 77 04/05/12 15:21:25 3200.16 62 58 58 57 15.6 77 04/05/12 15:21:30 3200.16 62 58 58 57 15.8 77 04/05/12 15:21:35 3200.16 63 59 58 56 15.9 77 04/05/12 15:21:40 3200.16 63 58 58 56 15.9 77 04/05/12 15:21:45 3200.16 63 59 58 56 15.6 77 04/05/12 15:21:50 3200.16 62 59 58 58 15.8 77 04/05/12 15:21:55 3200.16 63 58 58 57 15.9 77 04/05/12 15:22:00 3200.16 63 58 58 56 15.9 77 04/05/12 15:22:05 3200.16 63 58 58 56 16.3 77 04/05/12 15:22:10 3200.16 64 58 59 56 15.7 77 04/05/12 15:22:15 3200.16 63 58 60 57 17.2 77 04/05/12 15:22:20 3200.16 63 58 58 56 15.5 78 04/05/12 15:22:25 3200.16 63 58 60 57 15.9 77 04/05/12 15:22:30 3200.16 63 59 59 57 15.6 76 04/05/12 15:22:35 3200.16 64 59 60 57 17.7 77 04/05/12 15:22:40 3200.16 63 59 58 57 16.0 77 04/05/12 15:22:45 3200.16 64 58 58 57 15.8 77 04/05/12 15:22:50 3200.16 63 59 58 56 15.8 77 04/05/12 15:22:55 3200.16 63 58 59 57 15.8 78 04/05/12 15:23:00 3200.16 63 59 58 57 15.7 77 04/05/12 15:22:05 3200.16 62 58 57 58 15.9 77 04/05/12 15:22:10 3200.16 63 58 59 57 15.9 77 04/05/12 15:22:15 3200.16 63 59 58 56 17.1 77 04/05/12 15:22:20 3200.16 63 58 59 57 16.0 77 04/05/12 15:22:25 3200.16 63 58 58 57 15.9 77 04/05/12 15:22:30 3200.16 63 59 59 57 15.7 77 04/05/12 15:22:35 3200.16 64 59 58 58 21.0 77 04/05/12 15:22:40 3200.16 63 59 58 58 16.0 77 04/05/12 15:22:45 3200.16 64 59 59 57 15.7 77 04/05/12 15:22:50 3200.16 63 59 58 56 15.8 78 04/05/12 15:22:55 3200.16 63 59 58 57 15.8 78 04/05/12 15:23:00 3200.16 63 59 57 57 15.9 77 04/05/12 15:23:05 3200.16 64 58 58 58 15.7 77 04/05/12 15:23:10 3200.16 63 59 58 56 15.9 77 04/05/12 15:23:15 3200.16 64 59 58 57 16.6 77 04/05/12 15:23:20 3200.16 63 59 58 58 16.0 77 04/05/12 15:23:25 3200.16 63 58 58 57 15.7 77 04/05/12 15:23:30 3200.16 63 59 58 56 15.4 78 04/05/12 15:23:35 3200.16 64 60 59 61 17.7 77 04/05/12 15:23:40 3200.16 63 59 58 57 15.6 77 04/05/12 15:23:45 1600.08 53 54 53 52 4.4 76 04/05/12 15:23:50 3200.16 63 59 57 56 15.8 77 04/05/12 15:23:55 3200.16 63 58 57 57 15.6 77 04/05/12 15:24:00 3200.16 63 58 58 58 15.9 77 04/05/12 15:23:05 3200.16 64 59 58 56 15.6 77 04/05/12 15:23:10 3200.16 64 59 58 57 15.9 77 04/05/12 15:23:15 3200.16 63 59 58 59 16.7 77 04/05/12 15:23:20 3200.16 64 58 58 58 16.0 77 04/05/12 15:23:25 3200.16 64 58 58 57 15.7 77 04/05/12 15:23:30 3200.16 64 58 58 57 15.2 78 04/05/12 15:23:35 3200.16 63 59 59 58 17.8 77 04/05/12 15:23:40 3200.16 63 59 59 58 15.8 77 04/05/12 15:23:45 1600.08 53 54 53 52 4.7 76 04/05/12 15:23:50 3200.16 63 59 57 56 16.9 77 04/05/12 15:23:55 3200.16 63 58 59 56 15.7 77 04/05/12 15:24:00 3200.16 63 58 59 57 15.9 77 I also got a dmp file, here's what BlueScreenView gave me. The first three lines were in red, the summery says that the crash was casued by hal.dll and the address hal.dll+12903 Filename Address in Stack From Address To Address Size Time Stamp Time String Product Name File Description File Version Company Full Path hal.dll hal.dll+12903 fffff800`033e0000 fffff800`03429000 0x00049000 0x4a5bdf08 14/07/2009 02:27:36 ntoskrnl.exe ntoskrnl.exe+185923 fffff800`02e05000 fffff800`033e0000 0x005db000 0x4ec7a284 19/11/2011 13:35:16 Microsoft® Windows® Operating System NT Kernel & System 6.1.7600.16917 (win7_gdr.111118-2330) Microsoft Corporation C:\Windows\system32\ntoskrnl.exe pci.sys pci.sys+9aff fffff880`0108f000 fffff880`010c2000 0x00033000 0x4a5bc117 14/07/2009 00:19:51 kdcom.dll fffff800`00bc4000 fffff800`00bce000 0x0000a000 0x4d4d40d9 05/02/2011 13:21:45 mcupdate_GenuineIntel.dll fffff880`00c26000 fffff880`00c6a000 0x00044000 0x4a5bdf66 14/07/2009 02:29:10 PSHED.dll fffff880`00c6a000 fffff880`00c7e000 0x00014000 0x4a5be027 14/07/2009 02:32:23 Microsoft® Windows® Operating System Platform Specific Hardware Error Driver 6.1.7600.16385 (win7_rtm.090713-1255) Microsoft Corporation C:\Windows\system32\PSHED.dll CLFS.SYS fffff880`00c7e000 fffff880`00cdc000 0x0005e000 0x4a5bc11d 14/07/2009 00:19:57 CI.dll fffff880`00cdc000 fffff880`00d9c000 0x000c0000 0x4a5be01d 14/07/2009 02:32:13 Wdf01000.sys fffff880`00e0e000 fffff880`00eb2000 0x000a4000 0x4a5bc19f 14/07/2009 00:22:07 WDFLDR.SYS fffff880`00eb2000 fffff880`00ec1000 0x0000f000 0x4a5bc11a 14/07/2009 00:19:54 sptd.sys fffff880`00ec1000 fffff880`00fe7000 0x00126000 0x4ad24632 11/10/2009 21:55:14 WMILIB.SYS fffff880`00fe7000 fffff880`00ff0000 0x00009000 0x4a5bc117 14/07/2009 00:19:51 SCSIPORT.SYS fffff880`00d9c000 fffff880`00dcb000 0x0002f000 0x4a5bcac0 14/07/2009 01:01:04 ACPI.sys fffff880`01021000 fffff880`01078000 0x00057000 0x4a5bc106 14/07/2009 00:19:34 msisadrv.sys fffff880`01078000 fffff880`01082000 0x0000a000 0x4a5bc0fe 14/07/2009 00:19:26 vdrvroot.sys fffff880`01082000 fffff880`0108f000 0x0000d000 0x4a5bcadb 14/07/2009 01:01:31 partmgr.sys fffff880`010c2000 fffff880`010d7000 0x00015000 0x4a5bc11e 14/07/2009 00:19:58 volmgr.sys fffff880`010d7000 fffff880`010ec000 0x00015000 0x4a5bc11d 14/07/2009 00:19:57 volmgrx.sys fffff880`010ec000 fffff880`01148000 0x0005c000 0x4a5bc141 14/07/2009 00:20:33 pciide.sys fffff880`01148000 fffff880`0114f000 0x00007000 0x4a5bc115 14/07/2009 00:19:49 PCIIDEX.SYS fffff880`0114f000 fffff880`0115f000 0x00010000 0x4a5bc114 14/07/2009 00:19:48 mountmgr.sys fffff880`0115f000 fffff880`01179000 0x0001a000 0x4a5bc11a 14/07/2009 00:19:54 atapi.sys fffff880`01179000 fffff880`01182000 0x00009000 0x4a5bc113 14/07/2009 00:19:47 ataport.SYS fffff880`01182000 fffff880`011ac000 0x0002a000 0x4a5bc118 14/07/2009 00:19:52 msahci.sys fffff880`011ac000 fffff880`011b7000 0x0000b000 0x4a5bcabd 14/07/2009 01:01:01 amdxata.sys fffff880`011b7000 fffff880`011c2000 0x0000b000 0x4ba3a3ca 19/03/2010 17:18:18 fltmgr.sys fffff880`01211000 fffff880`0125d000 0x0004c000 0x4a5bc11f 14/07/2009 00:19:59 fileinfo.sys fffff880`0125d000 fffff880`01271000 0x00014000 0x4a5bc481 14/07/2009 00:34:25 Ntfs.sys fffff880`0145c000 fffff880`015fe000 0x001a2000 0x4d79996d 11/03/2011 04:39:25 msrpc.sys fffff880`01271000 fffff880`012cf000 0x0005e000 0x4a5bc17c 14/07/2009 00:21:32 ksecdd.sys fffff880`01400000 fffff880`0141a000 0x0001a000 0x4ec48579 17/11/2011 04:54:33 cng.sys fffff880`012cf000 fffff880`01342000 0x00073000 0x4ec48cfb 17/11/2011 05:26:35 pcw.sys fffff880`0141a000 fffff880`0142b000 0x00011000 0x4a5bc0ff 14/07/2009 00:19:27 Fs_Rec.sys fffff880`0142b000 fffff880`01435000 0x0000a000 0x4a5bc111 14/07/2009 00:19:45 ndis.sys fffff880`01653000 fffff880`01745000 0x000f2000 0x4a5bc184 14/07/2009 00:21:40 NETIO.SYS fffff880`01745000 fffff880`017a5000 0x00060000 0x4bbe946f 09/04/2010 03:43:59 ksecpkg.sys fffff880`017a5000 fffff880`017d0000 0x0002b000 0x4ec48d32 17/11/2011 05:27:30 tcpip.sys fffff880`01802000 fffff880`01a00000 0x001fe000 0x4e83eb7f 29/09/2011 04:52:31 fwpkclnt.sys fffff880`01600000 fffff880`0164a000 0x0004a000 0x4a5bc164 14/07/2009 00:21:08 vmstorfl.sys fffff880`017d0000 fffff880`017e0000 0x00010000 0x4a5bc67e 14/07/2009 00:42:54 volsnap.sys fffff880`01342000 fffff880`0138e000 0x0004c000 0x4a5bc128 14/07/2009 00:20:08 spldr.sys fffff880`017e0000 fffff880`017e8000 0x00008000 0x4a0858bb 11/05/2009 17:56:27 rdyboost.sys fffff880`0138e000 fffff880`013c8000 0x0003a000 0x4a5bc48a 14/07/2009 00:34:34 mup.sys fffff880`017e8000 fffff880`017fa000 0x00012000 0x4a5bc201 14/07/2009 00:23:45 hwpolicy.sys fffff880`0164a000 fffff880`01653000 0x00009000 0x4a5bc0fa 14/07/2009 00:19:22 fvevol.sys fffff880`011c2000 fffff880`011fc000 0x0003a000 0x4abd7db2 26/09/2009 03:34:26 disk.sys fffff880`01435000 fffff880`0144b000 0x00016000 0x4a5bc11d 14/07/2009 00:19:57 CLASSPNP.SYS fffff880`013c8000 fffff880`013f8000 0x00030000 0x4a5bc11e 14/07/2009 00:19:58 cdrom.sys fffff880`00dcb000 fffff880`00df5000 0x0002a000 0x4a5bc11a 14/07/2009 00:19:54 MpFilter.sys fffff880`02c1a000 fffff880`02c4b000 0x00031000 0x4d9cc801 06/04/2011 21:07:29 Null.SYS fffff880`02c4b000 fffff880`02c54000 0x00009000 0x4a5bc109 14/07/2009 00:19:37 Beep.SYS fffff880`02c54000 fffff880`02c5b000 0x00007000 0x4a5bca8d 14/07/2009 01:00:13 vga.sys fffff880`02c5b000 fffff880`02c69000 0x0000e000 0x4a5bc587 14/07/2009 00:38:47 VIDEOPRT.SYS fffff880`02c69000 fffff880`02c8e000 0x00025000 0x4a5bc58b 14/07/2009 00:38:51 watchdog.sys fffff880`02c8e000 fffff880`02c9e000 0x00010000 0x4a5bc53f 14/07/2009 00:37:35 RDPCDD.sys fffff880`02c9e000 fffff880`02ca7000 0x00009000 0x4a5bce62 14/07/2009 01:16:34 rdpencdd.sys fffff880`02ca7000 fffff880`02cb0000 0x00009000 0x4a5bce62 14/07/2009 01:16:34 rdprefmp.sys fffff880`02cb0000 fffff880`02cb9000 0x00009000 0x4a5bce63 14/07/2009 01:16:35 Msfs.SYS fffff880`02cb9000 fffff880`02cc4000 0x0000b000 0x4a5bc113 14/07/2009 00:19:47 Npfs.SYS fffff880`02cc4000 fffff880`02cd5000 0x00011000 0x4a5bc114 14/07/2009 00:19:48 tdx.sys fffff880`02cd5000 fffff880`02cf3000 0x0001e000 0x4a5bc16b 14/07/2009 00:21:15 TDI.SYS fffff880`02cf3000 fffff880`02d00000 0x0000d000 0x4a5bc16e 14/07/2009 00:21:18 afd.sys fffff880`02d00000 fffff880`02d89000 0x00089000 0x4efa940c 28/12/2011 04:59:08 netbt.sys fffff880`02d89000 fffff880`02dce000 0x00045000 0x4a5bc178 14/07/2009 00:21:28 ws2ifsl.sys fffff880`02dce000 fffff880`02dd9000 0x0000b000 0x4a5bccf9 14/07/2009 01:10:33 wfplwf.sys fffff880`02dd9000 fffff880`02de2000 0x00009000 0x4a5bccb6 14/07/2009 01:09:26 pacer.sys fffff880`00c00000 fffff880`00c26000 0x00026000 0x4a5bccc5 14/07/2009 01:09:41 vpcnfltr.sys fffff880`02de2000 fffff880`02df6000 0x00014000 0x4ab97aae 23/09/2009 02:32:30 netbios.sys fffff880`02c00000 fffff880`02c0f000 0x0000f000 0x4a5bccb6 14/07/2009 01:09:26 serial.sys fffff880`04075000 fffff880`04092000 0x0001d000 0x4a5bcaa8 14/07/2009 01:00:40 wanarp.sys fffff880`04092000 fffff880`040ad000 0x0001b000 0x4a5bcced 14/07/2009 01:10:21 vpcvmm.sys fffff880`040ad000 fffff880`04103180 0x00056180 0x4ab97ab6 23/09/2009 02:32:38 termdd.sys fffff880`04104000 fffff880`04118000 0x00014000 0x4a5bce64 14/07/2009 01:16:36 rdbss.sys fffff880`04118000 fffff880`04169000 0x00051000 0x4a5bc219 14/07/2009 00:24:09 nsiproxy.sys fffff880`04169000 fffff880`04175000 0x0000c000 0x4a5bc15e 14/07/2009 00:21:02 mssmbios.sys fffff880`04175000 fffff880`04180000 0x0000b000 0x4a5bc3be 14/07/2009 00:31:10 discache.sys fffff880`04180000 fffff880`0418f000 0x0000f000 0x4a5bc52e 14/07/2009 00:37:18 csc.sys fffff880`04280000 fffff880`04303000 0x00083000 0x4a5bc22a 14/07/2009 00:24:26 dfsc.sys fffff880`04303000 fffff880`04321000 0x0001e000 0x4db78623 27/04/2011 03:57:39 blbdrive.sys fffff880`04321000 fffff880`04332000 0x00011000 0x4a5bc4df 14/07/2009 00:35:59 tunnel.sys fffff880`04332000 fffff880`04358000 0x00026000 0x4a5bccc1 14/07/2009 01:09:37 intelppm.sys fffff880`04358000 fffff880`0436e000 0x00016000 0x4a5bc0fd 14/07/2009 00:19:25 nvlddmkm.sys fffff880`0fe34000 fffff880`10b52000 0x00d1e000 0x4f4e68c4 29/02/2012 19:04:52 nvBridge.kmd fffff880`10b52000 fffff880`10b53180 0x00001180 0x4d27c482 08/01/2011 02:57:22 dxgkrnl.sys fffff880`04450000 fffff880`04544000 0x000f4000 0x4d3fa1a0 26/01/2011 05:22:56 dxgmms1.sys fffff880`04544000 fffff880`0458a000 0x00046000 0x4d3fa174 26/01/2011 05:22:12 usbuhci.sys fffff880`0458a000 fffff880`04597000 0x0000d000 0x4d8c0a8f 25/03/2011 04:22:55 USBPORT.SYS fffff880`04597000 fffff880`045ed000 0x00056000 0x4d8c0a97 25/03/2011 04:23:03 usbehci.sys fffff880`045ed000 fffff880`045fe000 0x00011000 0x4d8c0a91 25/03/2011 04:22:57 HDAudBus.sys fffff880`04400000 fffff880`04424000 0x00024000 0x4a5bcbf5 14/07/2009 01:06:13 1394ohci.sys fffff880`10b54000 fffff880`10b92000 0x0003e000 0x4a5bcc30 14/07/2009 01:07:12 Rt64win7.sys fffff880`10b92000 fffff880`10bc4000 0x00032000 0x49a65b0d 26/02/2009 10:04:13 i8042prt.sys fffff880`04424000 fffff880`04442000 0x0001e000 0x4a5bc11d 14/07/2009 00:19:57 kbdclass.sys fffff880`10bc4000 fffff880`10bd3000 0x0000f000 0x4a5bc116 14/07/2009 00:19:50 VMkbd.sys fffff880`04442000 fffff880`0444d000 0x0000b000 0x4b5a836f 23/01/2010 06:04:47 serenum.sys fffff880`10bd3000 fffff880`10bdf000 0x0000c000 0x4a5bcaa1 14/07/2009 01:00:33 av1shsvl.SYS fffff880`0436e000 fffff880`043b3000 0x00045000 0x4a5cf4d7 14/07/2009 22:12:55 wmiacpi.sys fffff880`10bdf000 fffff880`10be8000 0x00009000 0x4a5bc3b6 14/07/2009 00:31:02 CompositeBus.sys fffff880`10be8000 fffff880`10bf8000 0x00010000 0x4a5bcaa1 14/07/2009 01:00:33 AgileVpn.sys fffff880`0fe00000 fffff880`0fe16000 0x00016000 0x4a5bccf0 14/07/2009 01:10:24 rasl2tp.sys fffff880`043b3000 fffff880`043d7000 0x00024000 0x4a5bcce3 14/07/2009 01:10:11 ndistapi.sys fffff880`0fe16000 fffff880`0fe22000 0x0000c000 0x4a5bccd8 14/07/2009 01:10:00 ndiswan.sys fffff880`04200000 fffff880`0422f000 0x0002f000 0x4a5bcce3 14/07/2009 01:10:11 raspppoe.sys fffff880`0422f000 fffff880`0424a000 0x0001b000 0x4a5bcce9 14/07/2009 01:10:17 raspptp.sys fffff880`0424a000 fffff880`0426b000 0x00021000 0x4a5bccea 14/07/2009 01:10:18 rassstp.sys fffff880`043d7000 fffff880`043f1000 0x0001a000 0x4a5bccf1 14/07/2009 01:10:25 tapoas.sys fffff880`0fe22000 fffff880`0fe2f000 0x0000d000 0x4c3a627f 12/07/2010 01:31:59 tap0901.sys fffff880`043f1000 fffff880`043fe000 0x0000d000 0x4b22da33 12/12/2009 00:48:03 rdpbus.sys fffff880`0426b000 fffff880`04276000 0x0000b000 0x4a5bceaa 14/07/2009 01:17:46 mouclass.sys fffff880`0418f000 fffff880`0419e000 0x0000f000 0x4a5bc116 14/07/2009 00:19:50 swenum.sys fffff880`0444d000 fffff880`0444e480 0x00001480 0x4a5bca92 14/07/2009 01:00:18 ks.sys fffff880`0419e000 fffff880`041e1000 0x00043000 0x4b8f37d9 04/03/2010 05:32:25 umbus.sys fffff880`041e1000 fffff880`041f3000 0x00012000 0x4a5bcc20 14/07/2009 01:06:56 vpcusb.sys fffff880`04000000 fffff880`0401d000 0x0001d000 0x4ab97ab7 23/09/2009 02:32:39 usbrpm.sys fffff880`0401d000 fffff880`0402c000 0x0000f000 0x4a5bd2c2 14/07/2009 01:35:14 USBD.SYS fffff880`045fe000 fffff880`045fff00 0x00001f00 0x4d8c0a8b 25/03/2011 04:22:51 vmnetadapter.sys fffff880`10bf8000 fffff880`10c00000 0x00008000 0x4a800ce5 10/08/2009 13:04:53 VMNET.SYS fffff880`04276000 fffff880`04280000 0x0000a000 0x4a800ce2 10/08/2009 13:04:50 vpchbus.sys fffff880`0402c000 fffff880`04068000 0x0003c000 0x4ab97ab0 23/09/2009 02:32:32 usbhub.sys fffff880`04c26000 fffff880`04c80000 0x0005a000 0x4d8c0aaa 25/03/2011 04:23:22 NDProxy.SYS fffff880`04c80000 fffff880`04c95000 0x00015000 0x4a5bccdd 14/07/2009 01:10:05 HdAudio.sys fffff880`04c95000 fffff880`04cf1000 0x0005c000 0x4a5bcc23 14/07/2009 01:06:59 portcls.sys fffff880`04cf1000 fffff880`04d2e000 0x0003d000 0x4a5bcc03 14/07/2009 01:06:27 drmk.sys fffff880`04d2e000 fffff880`04d50000 0x00022000 0x4a5bd8e5 14/07/2009 02:01:25 ksthunk.sys fffff880`04d50000 fffff880`04d55200 0x00005200 0x4a5bca93 14/07/2009 01:00:19 win32k.sys fffff960`000c0000 fffff960`003d4000 0x00314000 0x00000000 Dxapi.sys fffff880`04d56000 fffff880`04d62000 0x0000c000 0x4a5bc574 14/07/2009 00:38:28 udfs.sys fffff880`04d62000 fffff880`04db6000 0x00054000 0x4a5bc1f9 14/07/2009 00:23:37 monitor.sys fffff880`04db6000 fffff880`04dc4000 0x0000e000 0x4a5bc58c 14/07/2009 00:38:52 TSDDD.dll fffff960`004c0000 fffff960`004ca000 0x0000a000 0x00000000 hidusb.sys fffff880`04dc4000 fffff880`04dd2000 0x0000e000 0x4a5bcbfe 14/07/2009 01:06:22 HIDCLASS.SYS fffff880`04dd2000 fffff880`04deb000 0x00019000 0x4a5bcbfd 14/07/2009 01:06:21 HIDPARSE.SYS fffff880`04deb000 fffff880`04df3080 0x00008080 0x4a5bcbf9 14/07/2009 01:06:17 cdd.dll fffff960`00660000 fffff960`00687000 0x00027000 0x00000000 mouhid.sys fffff880`04c00000 fffff880`04c0d000 0x0000d000 0x4a5bca94 14/07/2009 01:00:20 luafv.sys fffff880`05a78000 fffff880`05a9b000 0x00023000 0x4a5bc295 14/07/2009 00:26:13 WudfPf.sys fffff880`05a9b000 fffff880`05abc000 0x00021000 0x4a5bcbd1 14/07/2009 01:05:37 crashdmp.sys fffff880`05abc000 fffff880`05aca000 0x0000e000 0x4a5bcabd 14/07/2009 01:01:01 dump_dumpata.sys fffff880`05aca000 fffff880`05ad6000 0x0000c000 0x4a5bc113 14/07/2009 00:19:47 dump_msahci.sys fffff880`05ad6000 fffff880`05ae1000 0x0000b000 0x4a5bcabd 14/07/2009 01:01:01 dump_dumpfve.sys fffff880`05ae1000 fffff880`05af4000 0x00013000 0x4a5bc18f 14/07/2009 00:21:51 vmnetbridge.sys fffff880`05af4000 fffff880`05b04000 0x00010000 0x4a800d26 10/08/2009 13:05:58 lltdio.sys fffff880`05b04000 fffff880`05b19000 0x00015000 0x4a5bcc92 14/07/2009 01:08:50 rspndr.sys fffff880`05b19000 fffff880`05b31000 0x00018000 0x4a5bcc92 14/07/2009 01:08:50 HTTP.sys fffff880`05b31000 fffff880`05bf9000 0x000c8000 0x4a5bc1a8 14/07/2009 00:22:16 bowser.sys fffff880`05a00000 fffff880`05a1e000 0x0001e000 0x4d6497da 23/02/2011 06:15:06 mpsdrv.sys fffff880`05a1e000 fffff880`05a36000 0x00018000 0x4a5bcc79 14/07/2009 01:08:25 mrxsmb.sys fffff880`05a36000 fffff880`05a63000 0x0002d000 0x4dc0bf1a 04/05/2011 03:51:06 mrxsmb10.sys fffff880`066ce000 fffff880`0671c000 0x0004e000 0x4e17c0a7 09/07/2011 03:44:55 mrxsmb20.sys fffff880`0671c000 fffff880`0673f000 0x00023000 0x4dc0bf19 04/05/2011 03:51:05 hcmon.sys fffff880`0673f000 fffff880`0674b000 0x0000c000 0x4b5a765b 23/01/2010 05:08:59 vmci.sys fffff880`0674b000 fffff880`06763000 0x00018000 0x4b5a6e03 23/01/2010 04:33:23 vmx86.sys fffff880`06896000 fffff880`0696c000 0x000d6000 0x4b5a8e0d 23/01/2010 06:50:05 MpNWMon.sys fffff880`0696c000 fffff880`0697c000 0x00010000 0x4d9cc7fb 06/04/2011 21:07:23 peauth.sys fffff880`06600000 fffff880`066a6000 0x000a6000 0x4a5bd8df 14/07/2009 02:01:19 secdrv.SYS fffff880`0697c000 fffff880`06987000 0x0000b000 0x4508052e 13/09/2006 14:18:38 srvnet.sys fffff880`06987000 fffff880`069b4000 0x0002d000 0x4dba2ca3 29/04/2011 04:12:35 tcpipreg.sys fffff880`069b4000 fffff880`069c6000 0x00012000 0x4a5bcccd 14/07/2009 01:09:49 vmnetuserif.sys fffff880`069c6000 fffff880`069d0000 0x0000a000 0x4b5a7a6b 23/01/2010 05:26:19 vstor2-mntapi10.sys fffff880`069d0000 fffff880`069dc000 0x0000c000 0x49e94462 18/04/2009 04:09:22 vstor2-ws60.sys fffff880`069dc000 fffff880`069e8000 0x0000c000 0x4ad39a52 12/10/2009 22:06:26 srv2.sys fffff880`06800000 fffff880`06867000 0x00067000 0x4dba2cb3 29/04/2011 04:12:51 srv.sys fffff880`06763000 fffff880`067f8000 0x00095000 0x4dba2cc1 29/04/2011 04:13:05 NisDrvWFP.sys fffff880`06867000 fffff880`0687f000 0x00018000 0x4d9cc855 06/04/2011 21:08:53 WinRing0x64.sys fffff880`0687f000 fffff880`06886000 0x00007000 0x488b26c1 26/07/2008 14:29:37 asyncmac.sys fffff880`0aa8f000 fffff880`0aa9a000 0x0000b000 0x4a5bcce5 14/07/2009 01:10:13 nvoclk64.sys fffff880`0aa9a000 fffff880`0aaaa000 0x00010000 0x4ab00e3d 15/09/2009 22:59:25 I'd apreciate any help because I'm well outside of my comfort zone.

  Read the article

• Determining failing sectors on portable flash memory

  - by Faxwell Mingleton

  I'm trying to write a program that will detect signs of failure for portable flash memory devices (thumb drives, etc). I have seen tools in the past that are able to detect failing sectors and other kinds of trouble on conventional mechanical hard drives, but I fear that flash memory does not have the same kind of predictable low-level access to the hardware due to the internal workings of the storage. Things like wear-leveling and other block-remapping techniques (to skip over 'dead' sectors?) lead me to believe that determining if a flash drive is failing will be difficult at best, if not impossible (short of having constant read failures and device unmounts). Flash drives at their end-of-life should be easy to detect (constant CRC discrepancies during reads and all-out failure). But what about drives that might be failing early? Are there any tell-tale signs like slower throughput speeds that might indicate a flash drive is going to fail much sooner than normal? Along the lines of detecting potentially bad blocks, I had considered attempting random reads/writes to a file close to or exactly the size of the entire volume, but even then is it possible that the drive might report sizes under its maximum capacity to account for 'dead' blocks? In short, is there any way to circumvent or at least detect (algorithmically or otherwise) the use of block-remapping or other life extension techniques for flash memory? Let me end this question by expressing my uncertainty as to whether or not this belongs on serverfault.com . This is definitely a hardware-related question, but I also desire a software solution - preferably one that I can program myself. If this question is misplaced, I will be happy to migrate it to serverfault - but I do need a programming solution. Please let me know if you need clarification :) Thanks!

  Read the article

• Uncorrectable Machine Check Exception on HP DL360 G7

  - by ReDSerpenT

  i have about every hour in IML (hplog) from HP DL360 G7 record: CRITICAL: CPU - Uncorrectable Machine Check Exception (Board 0, Processor 1, APIC ID 0x00000003, Bank 0x00000005, Status 0xBE000000'00800400, Address 0x00003FFF'811239E0, Misc 0x00000000'00007FFF) hpasmcli show server System : ProLiant DL360 G7 ROM version : P68 09/30/2010 iLo present : Yes Can someone tell me what part is being referenced by the IML status codes above? Thank in advance!

  Read the article

• DIY a simple .inf on an existing .sys?

  - by Stijn Sanders

  In continuation of attempting to get an old Digi ST-1032 working on a new server, we've downgraded a server to Windows 2000 in an attempt to use the NT4 drivers. And it works, the old software setup works, finds the device on the SCSI bus, and connects the 32 ports to COM3..COM34 or any other set using the port remapper tool. The minor issue that remains is that Plug-and-Play still detects this device over SCSI and tries to wizard you into selecting a driver for it. Which doesn't exists (Digi Intl support confirms this device is so old, a 2000 or XP driver was never made). The exact name displayed is "DigiIntl ST-1032 SCSI Net Device" (Oddly enough, two devices get detected with this name, on two neighbouring LUN's, could one be the built-in terminator?) Is there a way to concoct a simple .inf that would (re-)register the existing sts.sys that appears to get registered by the (old) installer of the driver software?

  Read the article

• Force RAID to read "exiled" disk?

  - by user197015

  We have a RAID 6 array (Infortrend EonStor DS S16F) that recently had two disks fail. Immediately prior to replacing these two disks, a third, good, disk was accidentally ejected from the array. After reinserting this disk it is marked as "exiled" by the array's firmware, and so even after replacing the two failed disks with new ones the array refuses to rebuild the logical volume and remains inaccessible. Since the temporarily-ejected disk is still functional and nothing has been written to the array since it was ejected, it seems that it should theoretically be possible to recover all the data on the array, but how can we convince the array to use the data from the "exiled" disk? Thanks for any help or advice you can offer.

  Read the article

• Differences between KVR16N11H/8 and KVR16N11/8 memory except for height?

  - by rzetterberg

  I accidentally ordered KVR16N11/8 instead of KVR16N11H/8 and I'm wondering if I'm going to have compability issues with my Intel DP67DE motherboard. When searching for compatible RAM on Kingstons site for that motherboard the KVR16N11H/8 RAM was one of the compatible ones. The KVR16N11/8 did not show up as compatible for that motherboard. The only difference I can see is that they have different physical height, or am I missing something?

  Read the article

• What exactly is a Mobile mouse? + Mouse Recommendation

  - by chobo2

  I am really disappointed with Logitech. My first cordless wireless mouse was from them and it lasted like 5 years. So I decided to get another one from them http://www.futureshop.ca/catalog/proddetail.asp?logon=&langid=EN&sku_id=0665000FS10099373&catid= And this mouse sucks bad. After 6 months it broke. I returned it under warranty and got a new one now 4-6 month later it is on the verge of breaking again.... You pay like $50 for this mouse and it lasts like 6 months that sad. I just lost faith in Logitech mice as I remember my bro also had a logitech mouse too and it broke after like 6 months. He then bought another logitech mouse(different model) that has been working for maybe 2 years(and no signs of breaking) but I am not crazy about the mouse(I don't like the 2 buttons by the wheel) and I not sure if they even sell it(maybe they got rid of it because it lasts too long). http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=1578495&CatId=1285 So I am looking at a Microsoft mouse. http://www.futureshop.ca/catalog/proddetail.asp?logon=&langid=EN&sku_id=0665000FS10125565&catid= I am looking at this one but I am not sure what they mean by mobile mouse. I think that is what MS calls notebook mice. So I am not sure if this would be a good mouse to get for a desktop. I see it uses like a micro usb receiver but I am not sure if it is smaller then a standard mouse. But almost all the mice I looked at at futureshop.ca or staples are labeled notebook mice or mobile mice. So not sure what mice would be right for me. I don't want a corded one though. I really liked the LX6 design alot but it can't last more than 6 months. Thanks

  Read the article

• Does the Intel DX79TO motherboard support x8 devices (SAS HBAs) on PCIe x16 slots?

  - by Zac B

  Context: I have an Intel DX79TO motherboard and a Sun SAS3081E-S/LSI 1060E-S HBA card with a PCIe x8 interface. I plug the HBA into my mobo next to my graphics card, and the HBA power lights illuminate, but the BIOS and OSes (tried Linux, ESXi, Win7) don't see the HBA at all. Question: Does the DX79TO motherboard support non-x16/non-GPU devices in its PCIe x16 slots? According to this question, some consumer motherboards don't support this, but I can't figure out whether or not this motherboard/family does. The answer will affect whether I buy a new motherboard or RMA the SAS card, with money attached to each course, so I figured I'd ask here first. What I've Tried: I've read the spec/manuals for the motherboard and the HBA, and I didn't see anything regarding whether or not the x16 slots were back-compatible to lower lane widths/non graphics-card devices, or whether or not the card could run in wider slots than x8. I've tried contacting Intel, but that was over a month ago and I haven't yet heard anything back except an automated "we got your email!" message.

  Read the article

• USB Drive Not recognized

  - by user36582

  My Friend's Pen Drive, which was working well very well just few days ago, is not being recognized after getting used by a virus affected machine. Its not on fdisk -l or lsusb However in dmesg I can see the following: [ 977.300013] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 977.420014] usb 5-2: device descriptor read/64, error -71 [ 977.644023] usb 5-2: device descriptor read/64, error -71 [ 977.860013] usb 5-2: new full speed USB device using uhci_hcd and address 3 [ 977.980013] usb 5-2: device descriptor read/64, error -71 [ 978.204013] usb 5-2: device descriptor read/64, error -71 [ 978.420013] usb 5-2: new full speed USB device using uhci_hcd and address 4 [ 978.828015] usb 5-2: device not accepting address 4, error -71 [ 978.940015] usb 5-2: new full speed USB device using uhci_hcd and address 5 [ 979.348013] usb 5-2: device not accepting address 5, error -71 [ 979.348292] hub 5-0:1.0: unable to enumerate USB device on port 2 [ 1017.848015] usb 5-2: new full speed USB device using uhci_hcd and address 6 [ 1017.968012] usb 5-2: device descriptor read/64, error -71 [ 1018.192017] usb 5-2: device descriptor read/64, error -71 [ 1018.408014] usb 5-2: new full speed USB device using uhci_hcd and address 7 [ 1018.528012] usb 5-2: device descriptor read/64, error -71 [ 1018.752023] usb 5-2: device descriptor read/64, error -71 [ 1018.968012] usb 5-2: new full speed USB device using uhci_hcd and address 8 [ 1019.376019] usb 5-2: device not accepting address 8, error -71 [ 1019.488011] usb 5-2: new full speed USB device using uhci_hcd and address 9 [ 1019.896016] usb 5-2: device not accepting address 9, error -71 [ 1019.896308] hub 5-0:1.0: unable to enumerate USB device on port 2 [ 1049.984016] usb 5-1: new full speed USB device using uhci_hcd and address 10 [ 1050.104014] usb 5-1: device descriptor read/64, error -71 [ 1050.328014] usb 5-1: device descriptor read/64, error -71 [ 1050.544014] usb 5-1: new full speed USB device using uhci_hcd and address 11 [ 1050.664018] usb 5-1: device descriptor read/64, error -71 [ 1050.888019] usb 5-1: device descriptor read/64, error -71 [ 1051.104025] usb 5-1: new full speed USB device using uhci_hcd and address 12 [ 1051.512014] usb 5-1: device not accepting address 12, error -71 [ 1051.624101] usb 5-1: new full speed USB device using uhci_hcd and address 13 [ 1052.032014] usb 5-1: device not accepting address 13, error -71 [ 1052.032991] hub 5-0:1.0: unable to enumerate USB device on port 1 What these Errors actually mean and how Can I get this pen drive Back to work ??

  Read the article

• Graphics card not working but integrated graphics is working

  - by Dustin Martin

  I have a PCIe Geforce 6600 that I've been using in my PC for a couple years now without problems. Recently though I've not been using the PC and had it unplugged. When I when to use it again I accidentally plugged in the monitor to the VGA port for the integrated graphics instead of the 6600 card VGA port and began using it again (I'm currently running Windows 7). I then realized that I had the monitor plugged in wrong and switched the monitor to the 6600 port. Unfortunately I cannot get it to work. When the monitor is plugged in to the 6600 port the monitor will not display anything; not when booting up or in Windows (so I don’t believe the problem is Windows related). I've even tried booting a live CD for Ubuntu to see if that will recognize the card but no luck. Somehow it seems I need to "turn off" the integrated graphics and instruct the PC to use the 6600 card but I'm at a loss for how to do that. I looked high and low in the BIOS for a setting to do this but cannot find anything at all. I have a MSI motherboard and AMI Bios. Any ideas?

  Read the article

• BIOS interrupts, privilege levels and paging

  - by Jack

  Hi, I was learning about Intel 8086-80486 CPUs and their interactions with HW. But I still don´t understand it quite well. Please, help me fill blank spots. First, I know that CPU communicates with HW using BIOS interrupts. But, what really happens in PC, when I call some INT instruction? I know that according the interrupt table some instructions begin to execute, but how by executing some instructions can BIOS recognize what I want to do? Becouse as far as I know, CPU has no extra communication channel with BIOS, it can only adress memory and receive data. So how can I instruct BIOS to do something, when I can only address RAM? Next thing I don't understand is about privilege levels. I know about ring model, and access rights, but how does the CPU know which privilege level has executed an instruction? I think that these privileges apply only when intruction is trying to address memory, but how does an application get its privilege level? I mean I know its level 3, but how is it set? And last thing, I know that paging is address scheme that is used to support aplication-transparent virtual memory, or swapping, but I could not find any information about how paging is tied with protected mode. Like if paging is like next mode independent of protected mode, or its somehow implemented within protected mode. And if it is implemented in protected mode, isn´t it too slow, to first address application space, then offset, and then paging folder, page and offset once again?

  Read the article

• HD Tune warning for "Reallocated Event Count" with a new/unused drive. How serious is that?

  - by Developer Art

  I've just looked at the health status of my old 2,5 inch 500 Gb Fujitsu drive with a popular "HD Tune" utility. It shows a warning for the "Reallocated Event Count" property. How serious is that? The thing is that the drive is practically new. I pulled it out of a new laptop over a year ago and never used it since. Right now it only has 53 "Power On" hours which sounds about right since I only had it running a few evenings overnight before switching it for something more performant. Does this warning indicate that the drive is likely to fail some time in the future? I'm somewhat perplexed since the drive is effectively unused. What is more, I have arranged with somebody to buy off this drive since I don't really need. It is 12,5 mm thick (with 3 plates) meaning it doesn't fit into an external enclosure which makes it quite useless to me. Can I give away the drive without having it on my conscience or better cancel the deal? In other words, can the drive be used safely for years to come or better throw it away? I'm running a sector test now to see if there are any real problems. Will post the results as soon as they're available.

  Read the article

• OSS4 on Debian Squeeze

  - by mit

  Hi, I am trying to get OSS4 to work on a Debian Squeeze 64 bit machine with an usb sound adapter. There is no sound from this adapter at the present, although it worked just before on the previous installation. You can see the output of some commands here: $ sudo /etc/init.d/oss4-base restart Stopping Open Sound System: SNDCTL_MIX_EXTINFO: No such device or address done. Starting Open Sound System: done (OSS is already loaded). $ sudo /etc/init.d/oss4-base stop Stopping Open Sound System: SNDCTL_MIX_EXTINFO: No such device or address done. $ sudo /etc/init.d/oss4-base start Starting Open Sound System: done (OSS is already loaded). $ ossinfo Version info: OSS 4.2 (b 2002/201001250441) (0x00040100) GPL Platform: Linux/x86_64 2.6.32-5-xen-amd64 #1 SMP Fri Dec 10 17:41:50 UTC 2010 (pc11) Number of audio devices: 2 Number of audio engines: 2 Number of MIDI devices: 0 Number of mixer devices: 2 Device objects 0: osscore0 OSS core services 1: oss_hdaudio0 ATI HD Audio interrupts=0 (613) HD Audio controller ATI HD Audio Vendor ID 0x10024383 Subvendor ID 0x10192816 Codec 0: Not present 2: oss_usb0 USB audio core services 3: usb0d8c0126-0 USB sound device 4: usb0d8c0126-1 USB sound device 5: usb0d8c0126-2 USB sound device 6: usb0d8c0126-3 USB sound device MIDI devices (/dev/midi*) Mixer devices 0: (USB sound device )(Mixer 0 of device object 3) 1: USB sound device (Mixer 0 of device object 5) Audio devices (USB sound device play /dev/oss/usb0d8c0126-1/pcm0 ) (device index 0) USB sound device play /dev/oss/usb0d8c0126-3/pcm0 (device index 1) Nodes /dev/dsp -> /dev/oss/usb0d8c0126-1/pcm0 /dev/dsp_out -> /dev/oss/usb0d8c0126-1/pcm0 /dev/dsp_mmap -> /dev/oss/usb0d8c0126-1/pcm0 $ osstest Sound subsystem and version: OSS 4.2 (b 2002/201001250441) (0x00040100) Platform: Linux/x86_64 2.6.32-5-xen-amd64 #1 SMP Fri Dec 10 17:41:50 UTC 2010 *** Scanning sound adapter #-1 *** /dev/oss/usb0d8c0126-1/pcm0 (audio engine 0): USB sound device play - Device not present - Skipping *** Scanning sound adapter #-1 *** /dev/oss/usb0d8c0126-3/pcm0 (audio engine 1): USB sound device play - Performing audio playback test... /dev/oss/usb0d8c0126-3/pcm0: No such file or directory Can't open the device *** Some errors were detected during the tests *** $ ossxmix /dev/oss/usb0d8c0126-2/mix0: No such file or directory No mixers could be opened $ ossmix SNDCTL_MIX_EXTINFO: No such device or address ad@pc11:~$ man ossmix ad@pc11:~$ ossmix -a SNDCTL_MIX_EXTINFO: No such device or address ad@pc11:~$ man ossmix ad@pc11:~$ ossmix -D SNDCTL_MIX_EXTINFO: No such device or address ad@pc11:~$ ossmix -D 0 SNDCTL_MIX_EXTINFO: No such device or address ad@pc11:~$ man ossmix ad@pc11:~$ ossxmix /dev/oss/usb0d8c0126-2/mix0: No such file or directory No mixers could be opened How can I make oss sound work? I can add more information if necessary.

  Read the article

• HP D530 Startup Error: 512 - Chassis Fan Not Detected

  - by lyrikles

  I'm using the HP D530 Motherboard/CPU that I installed in a new case with a 600W PSU. There was a problem with the onboard chassis fan connector (3-wire) not supplying sufficient power to the chassis fan indicated by the fan spinning very slowly, but I never experienced the "512 Error" at boot. Also, the same fan works perfectly connected directly to the PSU. I disconnected it since I already have plenty of fans connected via the PSU directly. Since then, on startup, I get the error: "512 - Chassis Fan Not Detected" and am asked to "Press F1 to continue". This gets quite annoying since I use this machine remotely (w/ FreeNAS). What could be causing the onboard fan connector to not be giving enough power? If this is unable to be corrected, how can I make the BIOS think there's a chassis fan plugged in without actually plugging a fan into the onboard connector? Would it be possible to jumper the pins without damaging the motherboard or PSU? Thanks,Erik

  Read the article

• Why does Mass Effect 1 run so slow on my machine if I have an XFX NVidia 9400GT video card? [closed]

  - by Papuccino1

  I so sick and tired of having my components pass the minimum requirements of a game and then I get 15 FPS on the game on everything low. Should't PC developers say 'use at least this video card for a smooth 30 FPS'? Here are my specs: Windows 7 2GB DDR2 RAM XFX Nvidia 9400gt Intel Pentium D Dual Core 2.8ghz I should be at LEAST getting 30 FPS on everything low right? Please tell me what I can do to make games run as they should, or is my video card not good for these games? Here are the recommended requirements from the official site: Recommended System Requirements for Mass Effect on the PC Operating System: Windows XP or Vista Processor: 2.6+GHZ Intel or 2.4+GHZ AMD Memory: 2 Gigabyte Ram Video Card: NVIDIA GeForce 7900 GTX or higher. ATI X1800 XL series or higher Hard Drive Space: 12 Gigabytes Sound Card: DirectX 9.0c compatible sound card and drivers – 5.1 sound card recommended My videocard is 9400GT, how is that worse than a 7900GTX? :S Edit 2: I should note, that I get poor frames when running the game in absolute BOTTOM specs. lowest resolution, no particles, etc. etc. Absolute ZERO and getting poor framerates.

  Read the article

• NetBSD Networking

  - by Mike

  Hello, everyone! I have an old Toshiba Satellite 4015CDT, with Pentium II MMX, 32MB RAM, 4GB HDD. It also has one USB 1.0 port, parallel and serial ports, a 3.5" floppy drive and a CD-ROM drive (probably almost dead). I've installed NetBSD on this machine (full install) and now I want to connect it to the Internet. Although it has one PCMCIA modem card in it, it is obviously not an option. I've narrowed down my available options to the following: Connect a USB wireless adapter. I have a Realtek RTL8192 adapter, but although the system gives me the device's name (through dmesg) it fails to recognize it as a network adapter. Connect the laptop to another machine through a serial connection, so that the other machine will serve as a bridge to the Internet. Here is the page from the NetBSD documentation on serial connections. Unfortunately, I was not able to find anything on bridging there. I would very much appreciate your suggestions on the topic. Thanks in advance.

  Read the article

• Intel® Core™2 Duo Desktop Processor vs Intel® Core™ i3 Desktop Processor?

  - by metal gear solid

  Intel® Core™2 Duo Desktop Processor vs Intel® Core™ i3 Desktop Processor? Which CPU is better to buy ? Intel® Core™ i3-530 Processor (4M Cache, 2.93 GHz) (it supports DDR3 also) or Intel® Core™2 Duo Processor E7500 (3M Cache, 2.93 GHz, 1066 MHz FSB) (it supports DDR2 only ) Although I do not play games on my PC but I need good performance in Adobe Photoshop, Watching Full HD Movies. I need good performance in Multitasking. Along with any of these CPU I would purchase 2 GB x 2 stick of RAM. and I will use Windows 7. and I will use Microsoft VPC images also with MS Virtual PC.

  Read the article

• Upgrading a PERC h310 to a PERC H710 mini RAID controller on a Dell R620

  - by Gregg Leventhal

  I have an ESXi 5.0 Free license host using an internal Datastore (RAID 5, 5 Disk) that was configured with a Dell PERC h310 RAID controller. The disk performance was very poor, so I upgraded to the PERC H710 Mini. The IT Tech installed the controller and powered the host back on. I had to rescan the controller and the datastore appeared. Should any settings be changed in the RAID BIOS, or should the default settings be sufficient? Is they anything to be aware of when performing this type of upgrade in order to achieve the maximum performance?

  Read the article

• Cheap dvr media server

  - by Tester101

  I would like to build a new computer to be used as a DVR and media server. I am thinking of using mythtv as the DVR software, but short of that decision I am completely open to suggestions. Requirements: Must be cheap. Must have low power consumption (since it will always be on). Should be quiet. Should be small. I'm really not sure where to start with this project, and am open to any hardware/software suggestions. Is it possible to build a small quiet and cheap system? *Keep in mind I am working on this project because I am tired of Cable rate increases, but I can't imagine living without a DVR so cost is very important and I would like the system to be sub $200.00. The system also needs to handle the new digital broadcast system. Thanks for the help,

  Read the article

• Intel Centrino Ultimate-N 6300 vs Advanced-N 6200 2x2

  - by wag2639

  Does the Ultimate-N 6300 actually offer better performance than the 6200? Are there any stats or benchmarks to show the difference? Also, what about battery performance? Does using the extra stream consume significantly more battery?

  Read the article

• Dell Poweredge 2650 RAM Upgrade

  - by Vik

  Hi, I bought an old Dell Poweredge 2650 off ebay to use as a dev server, but I need to get more RAM for it. From what I understand there were 2 versions of the 2650 released, with the older version only supporting PC1600 RAM (200MHz) and the 2nd version supporting PC2400. Unfortunately Dell thought it wasn't necessary to label their servers as such so I can't tell what version I have. Does anyone know if there is a way to tell without buying and testing RAM in the server?

  Read the article

• How to improve Windows Aero desktop performance?

  - by Click Ok

  Sincerely I don't understand why in Windows Experience ratings, the "Game Graphics" in my pc is 5.0 and "Graphic Elements" (windows aero desktop performance) is 3.9. How it is possible? My VGA is nice for games but bad for Windows Desktop? What I can do to improve windows aero desktop performance?

  Read the article

• Buying replacement Macbook Pro Battery - Genuine vs. eBay

  - by Nicolas Webb

  I'm looking to replace my Macbook Pro's battery (15", last model before the Unibody). It's currently at 55% capacity (as reported in System Information and Battery Health Monitor). I've reset the SMC firmware, calibrated the battery, and it's just not lasting that long anymore. I've seen some genuine replacements that are "pulls" (pulled from used computers) that are rated at least 90% capacity (iFixit, MacSales). I've also seen a variety of batteries on eBay that look more like clones than genuine batteries, but are new. A new battery from Apple is $129, and when I brought my laptop in they ran the Battery test and said if I bought the battery right then they'd give me a discount (around $100). Anyone out there used one of these "OEM Compatible" batteries? Fit/finish good? (I don't want a funky color or a corner that sticks out.) Or, should I just suck it up and get the genuine replacement (for about twice the price)?

  Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >