Search Results

Search found 24675 results on 987 pages for 'table'.

Page 944/987 | < Previous Page | 940 941 942 943 944 945 946 947 948 949 950 951  | Next Page >

  • HDFC Bank's Journey to Oracle Private Database Cloud

    - by Nilesh Agrawal
    One of the key takeaways from a recent post by Sushil Kumar is the importance of business initiative that drives the transformational journey from legacy IT to enterprise private cloud. The journey that leads to a agile, self-service and efficient infrastructure with reduced complexity and enables IT to deliver services more closely aligned with business requirements. Nilanjay Bhattacharjee, AVP, IT of HDFC Bank presented a real-world case study based on one such initiative in his Oracle OpenWorld session titled "HDFC BANK Journey into Oracle Database Cloud with EM 12c DBaaS". The case study highlighted in this session is from HDFC Bank’s Lending Business Segment, which comprises roughly 50% of Bank’s top line. Bank’s Lending Business is always under pressure to launch “New Schemes” to compete and stay ahead in this segment and IT has to keep up with this challenging business requirement. Lending related applications are highly dynamic and go through constant changes and every single and minor change in each related application is required to be thoroughly UAT tested certified before they are certified for production rollout. This leads to a constant pressure in IT for rapid provisioning of UAT databases on an ongoing basis to enable faster time to market. Nilanjay joined Sushil Kumar, VP, Product Strategy, Oracle, during the Enterprise Manager general session at Oracle OpenWorld 2012. Let's watch what Nilanjay had to say about their recent Database cloud deployment. “Agility” in launching new business schemes became the key business driver for private database cloud adoption in the Bank. Nilanjay spent an hour discussing it during his session. Let's look at why Database-as-a-Service(DBaaS) model was need of the hour in this case  - Average 3 days to provision UAT Database for Loan Management Application Silo’ed UAT environment with Average 30% utilization Compliance requirement consume UAT testing resources DBA activities leads to $$ paid to SI for provisioning databases manually Overhead in managing configuration drift between production and test environments Rollout impact/delay on new business initiatives The private database cloud implementation progressed through 4 fundamental phases - Standardization, Consolidation, Automation, Optimization of UAT infrastructure. Project scoping was carried out and end users and stakeholders were engaged early on right from planning phase and including all phases of implementation. Standardization and Consolidation phase involved multiple iterations of planning to first standardize on infrastructure, db versions, patch levels, configuration, IT processes etc and with database level consolidation project onto Exadata platform. It was also decided to have existing AIX UAT DB landscape covered and EM 12c DBaaS solution being platform agnostic supported this model well. Automation and Optimization phase provided the necessary Agility, Self-Service and efficiency and this was made possible via EM 12c DBaaS. EM 12c DBaaS Self-Service/SSA Portal was setup with required zones, quotas, service templates, charge plan defined. There were 2 zones implemented - Exadata zone  primarily for UAT and benchmark testing for databases running on Exadata platform and second zone was for AIX setup to cover other databases those running on AIX. Metering and Chargeback/Showback capabilities provided business and IT the framework for cloud optimization and also visibility into cloud usage. More details on UAT cloud implementation, related building blocks and EM 12c DBaaS solution are covered in Nilanjay's OpenWorld session here. Some of the key Benefits achieved from UAT cloud initiative are - New business initiatives can be easily launched due to rapid provisioning of UAT Databases [ ~3 hours ] Drastically cut down $$ on SI for DBA Activities due to Self-Service Effective usage of infrastructure leading to  better ROI Empowering  consumers to provision database using Self-Service Control on project schedule with DB end date aligned to project plan submitted during provisioning Databases provisioned through Self-Service are monitored in EM and auto configured for Alerts and KPI Regulatory requirement of database does not impact existing project in queue This table below shows typical list of activities and tasks involved when a end user requests for a UAT database. EM 12c DBaaS solution helped reduce UAT database provisioning time from roughly 3 days down to 3 hours and this timing also includes provisioning time for database with production scale data (ranging from 250 G to 2 TB of data) - And it's not just about time to provision,  this initiative has enabled an agile, efficient and transparent UAT environment where end users are empowered with real control of cloud resources and IT's role is shifted as enabler of strategic services instead of being administrator of all user requests. The strong collaboration between IT and business community right from planning to implementation to go-live has played the key role in achieving this common goal of enterprise private cloud. Finally, real cloud is here and this cloud is accompanied with rain (business benefits) as well ! For more information, please go to Oracle Enterprise Manager  web page or  follow us at :  Twitter | Facebook | YouTube | Linkedin | Newsletter

    Read the article

  • top tweets WebLogic Partner Community – March 2012

    - by JuergenKress
    Send us your tweets @wlscommunity #WebLogicCommunity and follow us on twitter http://twitter.com/wlscommunity PeterPaul ? RT @JDeveloper: EJB 3 Deployment guide for WebLogic Server Version: 10.3.4.0 dlvr.it/1J5VcV Andrejus Baranovskis ?Open ADF PopUp on Page Load fb.me/1Rx9LP3oW Sten Vesterli ? RT @OracleBlogs: Using the Oracle E-Business Suite SDK for Java on ADF Applications ow.ly/1hVKbB <- Neat! No more WS calls Java Buddy ?JavaFX 2.0: Example of MediaPlay java-buddy.blogspot.com/2012/03/javafx… Georges Saab Build improvements coming to #openJDK for #jdk8 mail.openjdk.java.net/pipermail/buil… NetBeans Team Share your #Java experience! JavaOne 2012 India call for papers: ow.ly/9xYg0 GlassFish ? GlassFish 3.1.2 Screencasts & Videos – bit.ly/zmQjn2 chriscmuir ?G+: New blog post: ADF Runtimes vs WLS versions as of JDeveloper 11.1.1.6.0 – bit.ly/y8tkgJ Michael Heinrichs New article: Creating a Sprite Animation with JavaFX blog.netopyr.com/2012/03/09/cre… Oracle WebLogic ? #WebLogic Devcast Webinar Series for March: Enterprise Java Scale Out, JPA, Distributed Grid Data Cache bit.ly/zeUXEV #Coherence Andrejus Baranovskis ?Extending Application Module for ADF BC Proxy User DB Connection fb.me/Bj1hLUqm OTNArchBeat ? Oracle Fusion Middleware on JDK 7 | Mark Nelson bit.ly/w7IroZ OTNArchBeat ? Java Champion Jonas Bonér Explains the Akka Platform bit.ly/x2GbXm Adam Bien ? (Java) FX Experience Tools–Feels Like Native Mac App: FX Experience Tools application comes with a native Mac O… bit.ly/waHF3H GlassFish ? GlassFish new recruit and Eclipse integration progress – bit.ly/y5eEkk JDeveloper & ADF Prototyping ADF Libraries dlvr.it/1Hhnw0 Eric Elzinga ?Oracle Fusion Middleware on JDK 7, bit.ly/xkphFQ ADF EMG ? Working with ADF in Arabic, Hebrew or other right-to-left-written language? Oracle UX asks for your help. groups.google.com/forum/?fromgro… Java ? A simple #JavaFX Login Form with a TRON like effect ow.ly/9n9AG JDeveloper & ADF ? Logging in Oracle ADF Applications dlvr.it/1HZhcX OTNArchBeat ? Oracle Cloud Conference: dates and locations worldwide bit.ly/ywXydR UK Oracle User Group ? Simon Haslam, ACE Director present on #WebLogic for DBAs at #oug_ire2012 j.mp/zG6vz3 @oraclewebcenter @oracleace #dublin Steven Davelaar ? Working with ADF and not a member of ADF EMG? You miss lots of valuable info, join now! sites.google.com/site/oracleemg… Simon Haslam @MaciejGruszka: Oracle plans to provide Forms & Reports plug-in for OVAB next year to help deployment. #ukoug MW SIG GlassFish ? Introducing JSR 357: Social Media API – bit.ly/yC8vez JAX London ? Are you coming to Java EE workshops by @AdamBien at JAX Days? Save £100 by registering today. #jaxdays #javaee jaxdays.com WebLogic Community ?Welcome to our Munich WebLogic 12c Bootcamp in Munich! If you also want to attend a training register for the Community oracle.com/partners/goto/… chriscmuir ? My first webcast for Oracle! (be kind) Basing ADF Business Component View Objects on More that one Entity Object bit.ly/ArKija OTNArchBeat ? Oracle Weblogic Server 12c is available on Oracle Solaris 11 (SPARC and x86) bit.ly/xE3TLg JDeveloper & ADF ? Basing ADF Business Component View Objects on More that one Entity Object – YouTube dlvr.it/1H93Qr OTNArchBeat ? Application-Driven Virtualization with Oracle Virtual Assembly Builder | Ronen Kofman bit.ly/wF1C1N Oracle WebLogic ? Steve Button’s blog: WebLogic Server Singleton Services ow.ly/1hOu4U Barbara Ann May ?@oracledevtools: New update: #NetBeans IDE 7.1.1, with support for #GlassFish 3.1.2 bit.ly/mOLcQd #java #developer OTNArchBeat ? Using Coherence with JDeveloper: bit.ly/AkoEQb WebLogic Community ? WebLogic Partner Community Newsletter February 2012 wp.me/p1LMIb-f3 GlassFish ? GlassFish 3.1.2 – new Podcast episode : bit.ly/wc6oBE Frank Nimphius ?Cool! Open JDeveloper 11.1.1.5, go help–>check for updates. First thing shown is that 11.1.1.6 is available. Never miss a new release Adam Bien ?5 Minutes (Video) With Java EE …Or With NetBeans + GlassFish: This screencast covers a 5-minute development of a… bit.ly/xkOJMf WebLogic Community ? Free Oracle WebLogic Certification Application Grid Implementation Specialist wp.me/p1LMIb-eT OTNArchBeat ?Oracle Coherence: First Steps Using Clusters and Basic API Usage | Ricardo Ferreira bit.ly/yYQ3Wz GlassFish ? JMS 2.0 Early Draft is here – bit.ly/ygT1VN OTNArchBeat ? Exalogic Networking Part 2 | The Old Toxophilist bit.ly/xuYMIi OTNArchBeat ?New Release: GlassFish Server 3.1.2. Read All About It! | Paul Davies bit.ly/AtlGxo Oracle WebLogic ?OTN Virtual Developer Day: #WebLogic 12c & #Coherence ost-conference on-demand page live with bonus #Virtualbox lab – bit.ly/xUy6BJ Oracle WebLogic ? Steve Button’s blog: WebLogic Server 11g (10.3.6) Documentation ow.ly/1hJgUB Lucas Jellema ? Just published an article on the AMIS blog: technology.amis.nl/2012/03/adf-11… ADF 11g – programmatically sorting rich table columns. Java Certification ? New Course! Learn how to create mobile applications using Java ME: bit.ly/xZj1Jh Simon Haslam ? @MaciejGruszka WebLogic 12c can run against 11g domain config without changes …and can rollback to 11. #ukoug MW SIG Justin Kestelyn ? Learn Advanced ADF, free and online bit.ly/wEKSRc WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: twitter,WebLogic,WebLogic Community,OPN,Oracle,Jürgen Kress,WebLogic 12c

    Read the article

  • Extending QuickBooks Reporting with the QuickBooks ADO.NET Data Provider

    - by dataintegration
    The ADO.NET Provider for QuickBooks comes with several reports you may request from QuickBooks by default. However, there are many more that are not readily available. The ADO.NET Provider for QuickBooks makes it easy for you to create new reports and customize existing ones. In this article, we will illustrate how to create your own report and retrieve it from the Server Explorer in Visual Studio. For this example we will show how to create an Item Profitability Report. Creating the report script file Step 1: Download the sample reports available here. Extract them to a folder of your choice. Step 2: Make a copy of the ReportGeneralSummary.rsd file and rename it to ItemProfitability.rsd. Then open the file in any text editor. Step 3: Open the installation directory of the ADO.NET Provider for QuickBooks. Under the \db\ folder, locate the ReportJob.rsb file. Open this file in another text editor. Note: Although we are using ReportJob.rsb for this example, other reports may be contained in other Report*.rsb files. We recommend consulting the included help file and first locating the Report stored procedure and ReportType you are looking for. Otherwise, you may open each Report*.rsb file and look under the "reporttype" input for the report you are attempting to create. Step 4: First, let's rename the title of ItemProfitability.rsd. Near the top of the file you will see a title and description. Change the title to match the name of the file. Change the description to anything you like. For example: <rsb:info title="ItemProfitability" description="Executes my custom report."> Just below the Title, there are a number of columns. The Id represents the row number. The RowType represents the type of data returned by QuickBooks. The ColumnValue* columns represent all of the column data returned by QuickBooks. In some instances, we may need to add additional ColumnValue columns. Step 5: To add additional ColumnValue columns, simply copy the last column, paste it directly below, and continue increasing the numerical value at end of the attribute name. For example: <attr name="ColumnValue9" xs:type="string" readonly="true" required="false" desc="Represents a column of data."/> <attr name="ColumnValue10" xs:type="string" readonly="true" required="false" desc="Represents a column of data."/> <attr name="ColumnValue11" xs:type="string" readonly="true" required="false" desc="Represents a column of data."/> <attr name="ColumnValue12" xs:type="string" readonly="true" required="false" desc="Represents a column of data."/> ... Caution: Do not rename the ColumnValue* definitions themselves. They are generalized so that we can understand each type of report returned by QuickBooks. Renaming them to something other than ColumnValue* will cause your columns to return with null values. Step 6: Now let's update the available inputs for the table. From the ReportJob.rsb file, copy all of the input elements into ItemProfitability under the "Psuedo-Column definitions" comment. You will be replacing the existing input elements in ItemProfitability with inputs from ReportJob. When you are done, it should look like this: <!-- Psuedo-Column definitions --> <input name="reporttype" description="The type of the report." value="ITEMESTIMATESVSACTUALS,ITEMPROFITABILITY,JOBESTIMATESVSACTUALSDETAIL,JOBESTIMATESVSACTUALSSUMMARY,JOBPROFITABILITYDETAIL,JOBPROFITABILITYSUMMARY," default="ITEMESTIMATESVSACTUALS" /> <input name="reportperiod" description="Report date range in the format (fromdate:todate), and either value may be omitted for an open ended range (e.g. 2009-12-25:). Supported date format: yyyy-MM-dd." /> <input name="reportdaterangemacro" description="Use a predefined date range." value="ALL,TODAY,THISWEEK,THISWEEKTODATE,THISMONTH,THISMONTHTODATE,THISQUARTER,THISQUARTERTODATE,THISYEAR,THISYEARTODATE,YESTERDAY,LASTWEEK,LASTWEEKTODATE,LASTMONTH,LASTMONTHTODATE,LASTQUARTER,LASTQUARTERTODATE,LASTYEAR,LASTYEARTODATE,NEXTWEEK,NEXTFOURWEEKS,NEXTMONTH,NEXTQUARTER,NEXTYEAR," default="ALL" /> ... Step 7: Now let's update the operationname attribute. This needs to match the same operationname used by ReportJob. After you have copied the correct value from ReportJob.rsb, the operationname in ItemProfitability should look like so: <rsb:set attr="operationname" value="qbReportJob"/> Step 8: There is one more thing we can do to make this a true Item Profitability report. We can remove the reporttype input and hardcode the value. To do this, copy and paste the rsb:set used for operationname. Then rename the attr and value to match the name and value you want to use. For example: <rsb:set attr="operationname" value="qbReportJob"/> <rsb:set attr="reporttype" value="ITEMPROFITABILITY"/> After this you can remove the input for reporttype. Now that you have your own report file, we can move on to displaying the report in the Visual Studio server explorer. Accessing the report through the Data Provider Step 1: Open Visual Studio. In the Server Explorer, configure a new connection with the QuickBooks Data Provider. Step 2: For the Location connection string property, enter the directory where the new report has been saved to. Step 3: The new report should appear as a new view in the Server Explorer. Let's retrieve data from it. Step 4: You can specify any inputs in the WHERE clause. New Report Example Script To help you get started using this new QuickBooks Data Provider report, you will need to download the QuickBooks ADO.NET Data Provider and the fully functional sample script.

    Read the article

  • How to UEFI install Ubuntu 12.10?

    - by Geezanansa
    Running a newer FM1 motherboard which is using an AMD 3870k APU with a new 1TB HDD. Following the advice in the motherboard manual and https://help.ubuntu.com/community/UEFI have now got to grub option screen for UEFI install. see http://imgur.com/VW5vz The dvd.iso being used is Ubuntu 12.10 desktop amd64 from ubuntu .com. The hdd has had a gpt partition table made for, by using gparted when in a live desktop session when booted in bios mode. (*edit/update: Although the old cd updates on running it is an old kernel and it did make a gpt but that version of gparted uses fdisk whereas gdisk is required to make gpt. Think am going to have to spend more time here http://www.dedoimedo.com/computers/gparted.html lol Using the gparted from 12.10 live session to make partitions; following the guidance regarding this at https://help.ubuntu.com/community/UEFI#Creating_an_EFI_partition, but can only boot to grub option screen http://imgur.com/VW5vz when 12.10 options to "try ubuntu" or "install ubuntu" are selected they give errors as described below*) but after making the gpt decided to leave it unformatted/unallocated space with the intention of using installer to set up partitions. update-originally but gparted now sees hdd as http://imgur.com/hFIvm as described above. *Booting live dvd in EFI mode gives "Secure Boot not installed" just before grub kernel option list with the option to "install ubuntu" but get "can not read cd/0" and "the kernel must be loaded first" errors; when that option is selected. Any pointers on how to get installer going for UEFI install would be good. Thanks in advance. update: Hopefully these screenshots can help better highlight where i am going wrong or if there is something else going on http://imgur.com/g30RB, http://imgur.com/VW5vz, http://imgur.com/31E0q, http://imgur.com/bnuaG, http://imgur.com/y4KGu, http://imgur.com/3u2QE, http://imgur.com/n9lN3, http://imgur.com/FEKvz, http://imgur.com/hFIvm, update: Thank you fernando garcia for pointing me in the right direction to start the process of elimantion. What i have done since asking question is a little home work starting here http://askubuntu.com/faq#bounty and here http://askubuntu.com/questions/how-to-ask. Looking at other similar questions was good fun and found this 12.10 UEFI Secure Boot install the most relative in helping getting ubuntu to uefi install on my system. In response to wolverine's question this article was referred to http://web.dodds.net/~vorlon/wiki/blog/SecureBoot_in_Ubuntu_12.10/ This article in the first sentence gives a link to http://www.ubuntu.com/download which is where i downloaded the 12.10 desktop amd64 .iso(and others) but have been unable to do a efi install of ubuntu on this system and as this is a new system have ended up just going with bios installer running which at least puts my mind at ease that i have not bricked my new mobo.(had to do a clrcmos and flash to latest bios version) So it possibly could be the bios settings or the bios version being used that is problem. To try and eliminate bios version i can not get to post screen in order to id bios version being used. Pressing tab to show post instead of logo and trying to pausebreak to catch post is proving difficult. If logo screen in bios is disabled just get black screen no post shown and pressing tab does not show post. Appreciate using appropriate bios settings and latest 12.10 release should simply get uefi installer running when selected from the grub list (nice graphic details in Identifying if computer boots the cd in efi mode section at https://help.ubuntu.com/community/UEFI#Identifying_if_the_computer_boots_the_CD_in_EFI_mode) And to confirm the hdd is booting in efi mode https://help.ubuntu.com/community/UEFI#Identifying_if_the_computer_boots_the_HDD_in_EFI_mode running the command [ -d /sys/firmware/efi ] && echo "EFI boot on HDD" || echo "Legacy boot on HDD" gave Legacy boot on HDD This is as expected because i allowed the bios installer (which was 12.04 desktop amd64 after trying 12.10 desktop amd64 in efi mode) to run to get a working installation. Which is not what was intended or wished for but wanted to get a working os to bench test new mobo i.e. prove it is working. There are other options as in installing other bootmanagers/loaders but do not wish to do so as shim should get grub2 going that is after secure boot has been signed.(Now got rough idea what should happen just it aint happening. Is it possible ahci drivers are required?) Will post boot info script url of the updated config/setup. The original question asked seems irrelevant to what is being said in this update but as the problem is not resolved will keep on trying efi installing! i.e the problem is same as when question asked just trying to update. Have tried to edit and update the best i can!

    Read the article

  • Windows Azure End to End Examples

    - by BuckWoody
    I’m fascinated by the way people learn. I’m told there are several methods people use to understand new information, from reading to watching, from experiencing to exploring. Personally, I use multiple methods of learning when I encounter a new topic, usually starting with reading a bit about the concepts. I quickly want to put those into practice, however, especially in the technical realm. I immediately look for examples where I can start trying out the concepts. But I often want a “real” example – not just something that represents the concept, but something that is real-world, showing some feature I could actually use. And it’s no different with the Windows Azure platform – I like finding things I can do now, and actually use. So when I started learning Windows Azure, I of course began with the Windows Azure Training Kit – which has lots of examples and labs, presentations and so on. But from there, I wanted more examples I could learn from, and eventually teach others with. I was asked if I would write a few of those up, so here are the ones I use. CodePlex CodePlex is Microsoft’s version of an “Open Source” repository. Anyone can start a project, add code, documentation and more to it and make it available to the world, free of charge, using various licenses as they wish. Microsoft also uses this location for most of the examples we publish, and sample databases for SQL Server. If you search in CodePlex for “Azure”, you’ll come back with a list of projects that folks have posted, including those of us at Microsoft. The source code and documentation are there, so you can learn using actual examples of code that will do what you need. There’s everything from a simple table query to a full project that is sort of a “Corporate Dropbox” that uses Windows Azure Storage. The advantage is that this code is immediately usable. It’s searchable, and you can often find a complete solution to meet your needs. The disadvantage is that the code is pretty specific – it may not cover a huge project like you’re looking for. Also, depending on the author(s), you might not find the documentation level you want. Link: http://azureexamples.codeplex.com/site/search?query=Azure&ac=8    Tailspin Microsoft Patterns and Practices is a group here that does an amazing job at sharing standard ways of doing IT – from operations to coding. If you’re not familiar with this resource, make sure you read up on it. Long before I joined Microsoft I used their work in my daily job – saved a ton of time. It has resources not only for Windows Azure but other Microsoft software as well. The Patterns and Practices group also publishes full books – you can buy these, but many are also online for free. There’s an end-to-end example for Windows Azure using a company called “Tailspin”, and the work covers not only the code but the design of the full solution. If you really want to understand the thought that goes into a Platform-as-a-Service solution, this is an excellent resource. The advantages are that this is a book, it’s complete, and it includes a discussion of design decisions. The disadvantage is that it’s a little over a year old – and in “Cloud” years that’s a lot. So many things have changed, improved, and have been added that you need to treat this as a resource, but not the only one. Still, highly recommended. Link: http://msdn.microsoft.com/en-us/library/ff728592.aspx Azure Stock Trader Sometimes you need a mix of a CodePlex-style application, and a little more detail on how it was put together. And it would be great if you could actually play with the completed application, to see how it really functions on the actual platform. That’s the Azure Stock Trader application. There’s a place where you can read about the application, and then it’s been published to Windows Azure – the production platform – and you can use it, explore, and see how it performs. I use this application all the time to demonstrate Windows Azure, or a particular part of Windows Azure. The advantage is that this is an end-to-end application, and online as well. The disadvantage is that it takes a bit of self-learning to work through.  Links: Learn it: http://msdn.microsoft.com/en-us/netframework/bb499684 Use it: https://azurestocktrader.cloudapp.net/

    Read the article

  • org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'transactionManager

    - by BilalFromParis
    when I add the code into my spring configuration file beans-hibernate.xml <bean id="transactionManager" class="org.springframework.orm.hibernate3.HibernateTransactionManager"> <property name="sessionFactory" ref="sessionFactory" /> </bean> It doesn't work and I don't know why, can someone help me please ? My Dao Class is : public class CourseDaoImpl implements CourseDao { private SessionFactory sessionFactory; public void setSessionFactory(SessionFactory sessionFactory) { this.sessionFactory = sessionFactory; } @Transactional public void store(Course course) { sessionFactory.getCurrentSession().saveOrUpdate(course); } @Transactional public void delete(Long courseId) { Course course = (Course)sessionFactory.getCurrentSession().get(Course.class, courseId); sessionFactory.getCurrentSession().delete(course); } @Transactional(readOnly=true) public Course findById(Long courseId) { return (Course)sessionFactory.getCurrentSession().get(Course.class, courseId); } @Transactional public List<Course> findAll() { Query query = sessionFactory.getCurrentSession().createQuery("FROM Course"); return (List<Course>)query.list(); } } but : juil. 04, 2012 3:38:18 AM org.springframework.context.support.AbstractApplicationContext prepareRefresh Infos: Refreshing org.springframework.context.support.ClassPathXmlApplicationContext@6ba8fb1b: startup date [Wed Jul 04 03:38:18 CEST 2012]; root of context hierarchy juil. 04, 2012 3:38:18 AM org.springframework.beans.factory.xml.XmlBeanDefinitionReader loadBeanDefinitions Infos: Loading XML bean definitions from class path resource [beans-hibernate.xml] juil. 04, 2012 3:38:19 AM org.springframework.beans.factory.support.DefaultListableBeanFactory preInstantiateSingletons Infos: Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@5a7fed46: defining beans [org.springframework.aop.config.internalAutoProxyCreator,org.springframework.transaction.annotation.AnnotationTransactionAttributeSource#0,org.springframework.transaction.interceptor.TransactionInterceptor#0,org.springframework.transaction.config.internalTransactionAdvisor,sessionFactory,transactionManager,courseDao]; root of factory hierarchy juil. 04, 2012 3:38:19 AM org.hibernate.annotations.common.Version INFO: HCANN000001: Hibernate Commons Annotations {4.0.1.Final} juil. 04, 2012 3:38:19 AM org.hibernate.Version logVersion INFO: HHH000412: Hibernate Core {4.1.3.Final} juil. 04, 2012 3:38:19 AM org.hibernate.cfg.Environment INFO: HHH000206: hibernate.properties not found juil. 04, 2012 3:38:19 AM org.hibernate.cfg.Environment buildBytecodeProvider INFO: HHH000021: Bytecode provider name : javassist juil. 04, 2012 3:38:19 AM org.hibernate.service.jdbc.connections.internal.DriverManagerConnectionProviderImpl configure INFO: HHH000402: Using Hibernate built-in connection pool (not for production use!) juil. 04, 2012 3:38:19 AM org.hibernate.service.jdbc.connections.internal.DriverManagerConnectionProviderImpl configure INFO: HHH000115: Hibernate connection pool size: 20 juil. 04, 2012 3:38:19 AM org.hibernate.service.jdbc.connections.internal.DriverManagerConnectionProviderImpl configure INFO: HHH000006: Autocommit mode: false juil. 04, 2012 3:38:19 AM org.hibernate.service.jdbc.connections.internal.DriverManagerConnectionProviderImpl configure INFO: HHH000401: using driver [org.hibernate.dialect.PostgreSQLDialect] at URL [jdbc:postgresql://localhost:5432/spring] juil. 04, 2012 3:38:19 AM org.hibernate.service.jdbc.connections.internal.DriverManagerConnectionProviderImpl configure INFO: HHH000046: Connection properties: {user=Bilal, password=**} juil. 04, 2012 3:38:19 AM org.hibernate.dialect.Dialect INFO: HHH000400: Using dialect: org.hibernate.dialect.PostgreSQLDialect juil. 04, 2012 3:38:19 AM org.hibernate.engine.jdbc.internal.LobCreatorBuilder useContextualLobCreation INFO: HHH000423: Disabling contextual LOB creation as JDBC driver reported JDBC version [3] less than 4 juil. 04, 2012 3:38:19 AM org.hibernate.engine.transaction.internal.TransactionFactoryInitiator initiateService INFO: HHH000399: Using default transaction strategy (direct JDBC transactions) juil. 04, 2012 3:38:19 AM org.hibernate.hql.internal.ast.ASTQueryTranslatorFactory INFO: HHH000397: Using ASTQueryTranslatorFactory juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.SchemaUpdate execute INFO: HHH000228: Running hbm2ddl schema update juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.SchemaUpdate execute INFO: HHH000102: Fetching database metadata juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.SchemaUpdate execute INFO: HHH000396: Updating schema juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.TableMetadata INFO: HHH000261: Table found: public.course juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.TableMetadata INFO: HHH000037: Columns: [fee, id, title, end_date, begin_date] juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.TableMetadata INFO: HHH000108: Foreign keys: [] juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.TableMetadata INFO: HHH000126: Indexes: [course_pkey] juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.SchemaUpdate execute INFO: HHH000232: Schema update complete juil. 04, 2012 3:38:19 AM org.springframework.beans.factory.support.DefaultSingletonBeanRegistry destroySingletons Infos: Destroying singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@5a7fed46: defining beans [org.springframework.aop.config.internalAutoProxyCreator,org.springframework.transaction.annotation.AnnotationTransactionAttributeSource#0,org.springframework.transaction.interceptor.TransactionInterceptor#0,org.springframework.transaction.config.internalTransactionAdvisor,sessionFactory,transactionManager,courseDao]; root of factory hierarchy juil. 04, 2012 3:38:19 AM org.hibernate.service.jdbc.connections.internal.DriverManagerConnectionProviderImpl stop INFO: HHH000030: Cleaning up connection pool [jdbc:postgresql://localhost:5432/spring] Exception in thread "main" org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'transactionManager' defined in class path resource [beans-hibernate.xml]: Invocation of init method failed; nested exception is java.lang.NoClassDefFoundError: org/hibernate/engine/SessionFactoryImplementor at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1455) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:294) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:225) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:291) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:193) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:585) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:913) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:464) at org.springframework.context.support.ClassPathXmlApplicationContext.(ClassPathXmlApplicationContext.java:139) at org.springframework.context.support.ClassPathXmlApplicationContext.(ClassPathXmlApplicationContext.java:83) at com.boutaya.bill.main.Main.main(Main.java:14) Caused by: java.lang.NoClassDefFoundError: org/hibernate/engine/SessionFactoryImplementor at org.springframework.orm.hibernate3.SessionFactoryUtils.getDataSource(SessionFactoryUtils.java:123) at org.springframework.orm.hibernate3.HibernateTransactionManager.afterPropertiesSet(HibernateTransactionManager.java:411) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1514) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1452) ... 12 more Caused by: java.lang.ClassNotFoundException: org.hibernate.engine.SessionFactoryImplementor at java.net.URLClassLoader$1.run(Unknown Source) at java.net.URLClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) ... 16 more I think the problem is when I use the Class : org.springframework.orm.hibernate3.HibernateTransactionManager ???

    Read the article

  • Supporting users if they're not on your site

    - by Roger Hart
    Have a look at this Read Write Web article, specifically the paragraph in bold and the comments. Have a wry chuckle, or maybe weep for the future of humanity - your call. Then pause, and worry about information architecture. The short story: Read Write Web bumps up the Google rankings for "Facebook login" at the same time as Facebook makes UI changes, and a few hundred users get confused and leave comments on Read Write Web complaining about not being able to log in to their Facebook accounts.* Blindly clicking the first Google result is not a navigation behaviour I'd anticipated for folks visiting big names sites like Facebook. But then, I use Launchy and don't know where any of my files are, depend on Firefox auto-complete, view Facebook through my IM client, and don't need a map to find my backside with both hands. Not all our users behave in the same way, which means not all of our architecture is within our control, and people can get to your content in all sorts of ways. Even if the Read Write Web episode is a prank of some kind (there are, after all, plenty of folks who enjoy orchestrated trolling) it's still a useful reminder. Your users may take paths through and to your content you cannot control, and they are unlikely to deconstruct their assumptions along the way. I guess the meaningful question is: can you still support those users? If they get to you from Google instead of your front door, does what they find still make sense? Does your information architecture still work if your guests come in through the bathroom window? Ok, so here they broke into the house next door - you can't be expected to deal with that. But the rest is well worth thinking about. Other off-site interaction It's rarely going to be as funny as the comments at Read Write Web, but your users are going to do, say, and read things they think of as being about you and your products, in places you don't control. That's good. If you pay attention to it, you get data. Your users get a better experience. There are easy wins, too. Blogs, forums, social media &c. People may look for and find help with your product on blogs and forums, on Twitter, and what have you. They may learn about your brand in the same way. That's fine, it's an interaction you can be part of. It's time-consuming, certainly, but you have the option. You won't get a blogger to incorporate your site navigation just in case your users end up there, but you can be there when they do. Again, Anne Gentle, Gordon McLean and others have covered this in more depth than I could. Direct contact Sales people, customer care, support, they all talk to people. Are they sending links to your content? if so, which bits? Do they know about all of it? Do they have the content they need to support them - messaging that funnels sales, FAQ that are realistically frequent, detailed examples of things people want to do, that kind of thing. Are they sending links because users can't find the good stuff? Are they sending précis of your content, or re-writes, or brand new stuff? If so, does that mean your content isn't up to scratch, or that you've got content missing? Direct sales/care/support interactions are enormously valuable, and can help you know what content your users find useful. You can't have a table of contents or a "See also" in a phonecall, but your content strategy can support more interactions than browsing. *Passing observation about Facebook. For plenty if folks, it is  the internet. Its services are simple versions of what a lot of people use the internet for, and they're aggregated into one stop. Flickr, Vimeo, Wordpress, Twitter, LinkedIn, and all sorts of games, have Facebook doppelgangers that are not only friendlier to entry-level users, they're right there, behind only one layer of authentication. As such, it could own a lot of interaction convention. Heavy users may well not be tech-savvy, and be quite change averse. That doesn't make this episode not dumb, but I'm happy to go easy on 'em.

    Read the article

  • Scripting out Contained Database Users

    - by Argenis
      Today’s blog post comes from a Twitter thread on which @SQLSoldier, @sqlstudent144 and @SQLTaiob were discussing the internals of contained database users. Unless you have been living under a rock, you’ve heard about the concept of contained users within a SQL Server database (hit the link if you have not). In this article I’d like to show you that you can, indeed, script out contained database users and recreate them on another database, as either contained users or as good old fashioned logins/server principals as well. Why would this be useful? Well, because you would not need to know the password for the user in order to recreate it on another instance. I know there is a limited number of scenarios where this would be necessary, but nonetheless I figured I’d throw this blog post to show how it can be done. A more obscure use case: with the password hash (which I’m about to show you how to obtain) you could also crack the password using a utility like hashcat, as highlighted on this SQLServerCentral article. The Investigation SQL Server uses System Base Tables to save the password hashes of logins and contained database users. For logins it uses sys.sysxlgns, whereas for contained database users it leverages sys.sysowners. I’ll show you what I do to figure this stuff out: I create a login/contained user, and then I immediately browse the transaction log with, for example, fn_dblog. It’s pretty obvious that only two base tables touched by the operation are sys.sysxlgns, and also sys.sysprivs – the latter is used to track permissions. If I connect to the DAC on my instance, I can query for the password hash of this login I’ve just created. A few interesting things about this hash. This was taken on my laptop, and I happen to be running SQL Server 2014 RTM CU2, which is the latest public build of SQL Server 2014 as of time of writing. In 2008 R2 and prior versions (back to 2000), the password hashes would start with 0x0100. The reason why this changed is because starting with SQL Server 2012 password hashes are kept using a SHA512 algorithm, as opposed to SHA-1 (used since 2000) or Snefru (used in 6.5 and 7.0). SHA-1 is nowadays deemed unsafe and is very easy to crack. For regular SQL logins, this information is exposed through the sys.sql_logins catalog view, so there is really no need to connect to the DAC to grab an SID/password hash pair. For contained database users, there is (currently) no method of obtaining SID or password hashes without connecting to the DAC. If we create a contained database user, this is what we get from the transaction log: Note that the System Base Table used in this case is sys.sysowners. sys.sysprivs is used as well, and again this is to track permissions. To query sys.sysowners, you would have to connect to the DAC, as I mentioned previously. And this is what you would get: There are other ways to figure out what SQL Server uses under the hood to store contained database user password hashes, like looking at the execution plan for a query to sys.dm_db_uncontained_entities (Thanks, Robert Davis!) SIDs, Logins, Contained Users, and Why You Care…Or Not. One of the reasons behind the existence of Contained Users was the concept of portability of databases: it is really painful to maintain Server Principals (Logins) synced across most shared-nothing SQL Server HA/DR technologies (Mirroring, Availability Groups, and Log Shipping). Often times you would need the Security Identifier (SID) of these logins to match across instances, and that meant that you had to fetch whatever SID was assigned to the login on the principal instance so you could recreate it on a secondary. With contained users you normally wouldn’t care about SIDs, as the users are always available (and synced, as long as synchronization takes place) across instances. Now you might be presented some particular requirement that might specify that SIDs synced between logins on certain instances and contained database users on other databases. How would you go about creating a contained database user with a specific SID? The answer is that you can’t do it directly, but there’s a little trick that would allow you to do it. Create a login with a specified SID and password hash, create a user for that server principal on a partially contained database, then migrate that user to contained using the system stored procedure sp_user_migrate_to_contained, then drop the login. CREATE LOGIN <login_name> WITH PASSWORD = <password_hash> HASHED, SID = <sid> ; GO USE <partially_contained_db>; GO CREATE USER <user_name> FROM LOGIN <login_name>; GO EXEC sp_migrate_user_to_contained @username = <user_name>, @rename = N’keep_name’, @disablelogin = N‘disable_login’; GO DROP LOGIN <login_name>; GO Here’s how this skeleton would look like in action: And now I have a contained user with a specified SID and password hash. In my example above, I renamed the user after migrated it to contained so that it is, hopefully, easier to understand. Enjoy!

    Read the article

  • SQLAuthority News – #SQLPASS 2012 Seattle Update – Memorylane 2009, 2010, 2011

    - by pinaldave
    Today is the first day of the SQLPASS 2012 and I will be soon posting SQL Server 2012 experience over here. Today when I landed in Seattle, I got the nostalgia feeling. I used to stay in the USA. I stayed here for more than 7 years – I studied here and I worked in USA. I had lots of friends in Seattle when I used to stay in the USA. I always wanted to visit Seattle because it is THE place. I remember once I purchased a ticket to travel to Seattle through Priceline (well it was the cheapest option and I was a student) but could not fly because of an interesting issue. I used to be Teaching Assistant of an advanced course and the professor asked me to build a pop-quiz for the course. I unfortunately had to cancel the trip. Before I returned to India – I pretty much covered every city existed in my list to must visit, except one – Seattle. It was so interesting that I never made it to Seattle even though I wanted to visit, when I was in USA. After that one time I never got a chance to travel to Seattle. After a few years I also returned to India for good. Once on Television I saw “Sleepless in Seattle” movie playing and I immediately changed the channel as it reminded me that I never made it to Seattle before. However, destiny has its own way to handle decisions. After I returned to India – I visited Seattle total of 5 times and this is my 6th visit to Seattle in less than 3 years. I was here for 3 previous SQLPASS events – 2009, 2010, and 2011 as well two Microsoft Most Valuable Professional Summit in 2009 and 2010. During these five trips I tried to catch up with all of my all friends but I realize that time has its own way of doing things. Many moved out of Seattle and many were too busy revive the old friendship but there were few who always make a point to meet me when I travel to the city. During the course of my visits I have made few fantastic new friends – Rick Morelan (Joes 2 Pros) and Greg Lynch. Every time I meet them I feel that I know them for years. I think city of Seattle has played very important part in our relationship that I got these fantastic friends. SQLPASS is the event where I find all of my SQL Friends and I look for this event for an entire year. This year’s my goal is to meet as many as new friends I can meet. If you are going to be at SQLPASS – FIND ME. I want to have a photo with you. I want to remember each name as I believe this is very important part of our life – making new friends and sustaining new friendship. Here are few of the pointers where you can find me. All Keynotes – Blogger’s Table Exhibition Booth Joes 2 Pros Booth #117 – Do not forget to stop by at the booth – I might have goodies for you – limited editions. Book Signing Events – Check details in tomorrow’s blog or stop by Booth #117 Evening Parties 6th Nov – Welcome Reception Evening Parties 7th Nov - Exhibitor Reception – Do not miss Booth #117 Evening Parties 8th Nov - Community Appreciation Party Additionally at few other locations – Embarcadero Booth In Coffee shops in Convention Center If you are SQLPASS – make sure that I find an opportunity to meet you at the event. Reserve a little time and lets have a coffee together. I will be continuously tweeting about my where about on twitter so let us stay connected on twitter. Here is my experience of my earlier experience of attending SQLPASS. SQLAuthority News – Book Signing Event – SQLPASS 2011 Event Log SQLAuthority News – Meeting SQL Friends – SQLPASS 2011 Event Log SQLAuthority News – Story of Seattle – SQLPASS 2011 Event Log SQLAuthority News – SQLPASS Nov 8-11, 2010-Seattle – An Alternative Look at Experience SQLAuthority News – Notes of Excellent Experience at SQL PASS 2009 Summit, Seattle Let us meet! Reference: Pinal Dave (http://blog.SQLAuthority.com)   Filed under: PostADay, SQL, SQL Authority, SQL PASS, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

    Read the article

  • Answers to “What source control system do you use?” (and some winners)

    - by jamiet
    About a month ago I posed a question here on my blog SQL Server devs–what source control system do you use, if any? (answer and maybe win free stuff) in which I asked SQL Server developers to answer the following questions: Are you putting your SQL Server code into a source control system? If so, what source control server software (e.g. TFS, Git, SVN, Mercurial, SourceSafe, Perforce) are you using? What source control client software are you using (e.g. TFS Team Explorer, Tortoise, Red Gate SQL Source Control, Red Gate SQL Connect, Git Bash, etc…)? Why did you make those particular software choices? Any interesting anecdotes to share in regard to your use of source control and SQL Server? I had some really great responses (I highly recommend going and reading them). I promised that the five best, most thought-provoking, responses (as determined by me) would win one of five pairs of licenses for Red Gate SQL Source Control and Red Gate SQL Connect; here are the five that I chose (note that if you responded but did not leave a means of getting in touch then you weren’t considered for one of the prizes – sorry): In general, I don't think the management overhead and licensing cost associated with TFS is worthwhile if all you're doing is using source control. To get value from TFS, at a minimum you need to be using team build, and possibly other stuff as well, such as the sharepoint integration. If that's all you need, then svn with Tortoise would be my first choice. If you want to add build automation later, you can do this with cruisecontrol (is it still called that?), JetBrains, etc. For a long time I thought that Redgate's claims about "bridging the SSMS-VS divide" were a load of hot air, since in my experience anyone who knew what they were doing was using Visual Studio, in particular SSDT and its predecessors. However, on a recent client I was putting in source control for the first time, and I discovered that the "divide" really does exist. That client has ended up using svn with Redgate SQL Source Control, with no build automation, but with scope to add it in the future. Gavin Campbell I think putting the DB under source control is a great idea.  I have issues with the earlier versions of SQL Source Control in that it provides little help in versioning the DB. I think the latest version merges SQL Compare and SQL Source Control together.  Which is how it should have been all along. Sure I have the DB scripts in SVN, but I can't automate DB builds and changes without more tools.  Frankly I'm surprised databases don't have some sort of versioning built into them. Nick Portelli Source control has been immensely useful and saved me from a lot of rework on more than one occasion.  I have learned that you have to be extremely careful checking in data.  Our system is internal only so during the system production run once a week, if there is a problem that I can fix easily(for example, a control table points to a file in the wrong environment), I'll do it directly in production so the run can continue as soon as possible since we have a specified time window.  We do full test runs to minimize this but it has come up once or twice.  We use Red-Gate source control to "push" from the test environment to the production environment.  There have been a couple of occasions where the test environment with the wrong setting was pushed back over the production environment because the change was made only in production.  Gotta keep an eye on that. Alan Dykes Goodness is it manual.  And can be extremely painful at times.  Not only are we running thin, we are constrained on the tools we can get ($$ must mean free).  Certainly no excuse, and a great opportunity to improve my skills by learning new things.  But...  Getting buy in a on a proven process or methodology is hard, takes time, and diverts us from development.  If SQL Source Control is easy to use and proven oh boy could you get some serious fans around here!  Seriously though, as the "accidental dba" of this shop any new ideas / easy to implement tools can make a world of difference in productivity and most importantly accuracy.  Manual = bad. :) John Hennesey (who left his email address) The one thing I would love to know more about is the unique challenges of working with databases as source code - you can store scripts, but are they written as deployment scripts with all the logic about how to apply them to an existing DB? Where is that baseline DB? Where's the data? How does a team share the data and the code? It's a real challenge. Merrill Aldrich Congratulations to the five of you. Red Gate will be in touch with you soon about your free licenses. Thank you to all those that responded. And again, go and check out all the responses – those above are only small proportion from what is a very interesting comment thread. @Jamiet

    Read the article

  • SQL SERVER – Beginning New Weekly Series – Memory Lane – #002

    - by pinaldave
    Here is the list of curetted articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2006 Query to Find ByteSize of All the Tables in Database This was my second blog post and today I do not remember what was the business need which has made me build this query. It was built for SQL Server 2000 and it will not directly run on SQL Server 2005 or later version now. It measured the byte size of the tables in the database. This can be done in many different ways as well for example SP_HELPDB as well SP_HELP. I wish to build similar script in 2005 and later version. 2007 This week I had completed my – 1 Year (365 blogs) and very first 1 Million Views. I was pretty excited at that time with this new achievement. SQL SERVER Versions, CodeNames, Year of Release When I started with SQL Server I did not know all the names correctly for each version and I often used to get confused with this. However, as time passed by I started to remember all the codename as well. In this blog post I have not included SQL Server 2012′s code name as it was not released at the time. SQL Server 2012′s code name is Denali. Here is the question for you – anyone know what is the internal name of the SQL Server’s next version? Searching String in Stored Procedure I have already started to work with 2005 by this time and I was personally converting each of my stored procedures to SQL Server 2005 compatible. As we were upgrading from SQL Server 2000 to SQL Server 2005 we had to search each of the stored procedures and make sure that we remove incompatible code from it. For example, syscolumns of SQL Server 2000 was now being replaced by sys.columns of SQL Server 2005. This stored procedure was pretty helpful at that time. Later on I build few additional versions of the same stored procedure. Version 1: This version finds the Stored Procedures related to Table Version 2: This is specific version which works with SQL Server 2005 and later version 2008 Clear Drop Down List of Recent Connection From SQL Server Management Studio It happens to all of us when we connected to some remote client server and we never ever have to connect to it again. However, it keeps on bothering us that the name shows up in the list all the time. In this blog post I covered a quick tip about how we can remove the same. I also wrote a small article about How to Check Database Integrity for all Databases and there was a funny question from a reader requesting T-SQL code to refresh databases. 2009 Stored Procedure are Compiled on First Run – SP is taking Longer to Run First Time A myth is quite prevailing in the industry that Stored Procedures are pre-compiled and they should always run faster. It is not true. Stored procedures are compiled on very first execution of it and that is the reason why it takes longer when it executes first time. In this blog post I had a great time discussing the same concept. If you do not agree with it, you are welcome to read this blog post. Removing Key Lookup – Seek Predicate – Predicate – An Interesting Observation Related to Datatypes Performance Tuning is an interesting concept and my personal favorite one. In many blog posts I have described how to do performance tuning and how to improve the performance of the queries. In this quick quick tip I have explained how one can remove the Key Lookup and improve performance. Here are very relevant articles on this subject: Article 1 | Article 2 | Article 3 2010 Recycle Error Log – Create New Log file without a Server Restart During one of the consulting assignments I noticed DBA restarting server to create new log file. This is absolutely not necessary and restarting server might have many other negative impacts. There is a common sp_cycle_errorlog which can do the same task efficiently and properly. Have you ever used this SP or feature? Additionally I had a great time presenting on SQL Server Best Practices in SharePoint Conference. 2011 SSMS 2012 Reset Keyboard Shortcuts to Default It is very much possible that we mix up various SQL Server shortcuts and at times we feel like resetting it to default. In SQL Server 2012 it is not easy to do it, there is a process to follow and I enjoyed blogging about it. Fundamentals of Columnstore Index Columnstore index is introduced in SQL Server 2012 and have been a very popular subject. It increases the speed of the server dramatically as well can be an extremely useful feature with Datawharehousing. However updating the columnstore index is not as simple as a simple UPDATE statement. Read in a detailed blog post about how Update works with Columnstore Index. Additionally, you can watch a Quick Video on this subject. SQL Server 2012 New Features I had decided to explore SQL Server 2012 features last year and went through pretty much every single concept introduced in separate blog posts. Here are two blog posts where I describe how SQL Server 2012 functions works. Introduction to CUME_DIST – Analytic Functions Introduction to FIRST _VALUE and LAST_VALUE – Analytic Functions OVER clause with FIRST_VALUE and LAST_VALUE – Analytic Functions I indeed enjoyed writing about SQL Server 2012 functions last year. Have you gone through all the new features which are introduced in SQL Server 2012? If not, it is still not late to go through them. Reference: Pinal Dave (http://blog.sqlauthority.com)   Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Subterranean IL: Constructor constraints

    - by Simon Cooper
    The constructor generic constraint is a slightly wierd one. The ECMA specification simply states that it: constrains [the type] to being a concrete reference type (i.e., not abstract) that has a public constructor taking no arguments (the default constructor), or to being a value type. There seems to be no reference within the spec to how you actually create an instance of a generic type with such a constraint. In non-generic methods, the normal way of creating an instance of a class is quite different to initializing an instance of a value type. For a reference type, you use newobj: newobj instance void IncrementableClass::.ctor() and for value types, you need to use initobj: .locals init ( valuetype IncrementableStruct s1 ) ldloca 0 initobj IncrementableStruct But, for a generic method, we need a consistent method that would work equally well for reference or value types. Activator.CreateInstance<T> To solve this problem the CLR designers could have chosen to create something similar to the constrained. prefix; if T is a value type, call initobj, and if it is a reference type, call newobj instance void !!0::.ctor(). However, this solution is much more heavyweight than constrained callvirt. The newobj call is encoded in the assembly using a simple reference to a row in a metadata table. This encoding is no longer valid for a call to !!0::.ctor(), as different constructor methods occupy different rows in the metadata tables. Furthermore, constructors aren't virtual, so we would have to somehow do a dynamic lookup to the correct method at runtime without using a MethodTable, something which is completely new to the CLR. Trying to do this in IL results in the following verification error: newobj instance void !!0::.ctor() [IL]: Error: Unable to resolve token. This is where Activator.CreateInstance<T> comes in. We can call this method to return us a new T, and make the whole issue Somebody Else's Problem. CreateInstance does all the dynamic method lookup for us, and returns us a new instance of the correct reference or value type (strangely enough, Activator.CreateInstance<T> does not itself have a .ctor constraint on its generic parameter): .method private static !!0 CreateInstance<.ctor T>() { call !!0 [mscorlib]System.Activator::CreateInstance<!!0>() ret } Going further: compiler enhancements Although this method works perfectly well for solving the problem, the C# compiler goes one step further. If you decompile the C# version of the CreateInstance method above: private static T CreateInstance() where T : new() { return new T(); } what you actually get is this (edited slightly for space & clarity): .method private static !!T CreateInstance<.ctor T>() { .locals init ( [0] !!T CS$0$0000, [1] !!T CS$0$0001 ) DetectValueType: ldloca.s 0 initobj !!T ldloc.0 box !!T brfalse.s CreateInstance CreateValueType: ldloca.s 1 initobj !!T ldloc.1 ret CreateInstance: call !!0 [mscorlib]System.Activator::CreateInstance<T>() ret } What on earth is going on here? Looking closer, it's actually quite a clever performance optimization around value types. So, lets dissect this code to see what it does. The CreateValueType and CreateInstance sections should be fairly self-explanatory; using initobj for value types, and Activator.CreateInstance for reference types. How does the DetectValueType section work? First, the stack transition for value types: ldloca.s 0 // &[!!T(uninitialized)] initobj !!T // ldloc.0 // !!T box !!T // O[!!T] brfalse.s // branch not taken When the brfalse.s is hit, the top stack entry is a non-null reference to a boxed !!T, so execution continues to to the CreateValueType section. What about when !!T is a reference type? Remember, the 'default' value of an object reference (type O) is zero, or null. ldloca.s 0 // &[!!T(null)] initobj !!T // ldloc.0 // null box !!T // null brfalse.s // branch taken Because box on a reference type is a no-op, the top of the stack at the brfalse.s is null, and so the branch to CreateInstance is taken. For reference types, Activator.CreateInstance is called which does the full dynamic lookup using reflection. For value types, a simple initobj is called, which is far faster, and also eliminates the unboxing that Activator.CreateInstance has to perform for value types. However, this is strictly a performance optimization; Activator.CreateInstance<T> works for value types as well as reference types. Next... That concludes the initial premise of the Subterranean IL series; to cover the details of generic methods and generic code in IL. I've got a few other ideas about where to go next; however, if anyone has any itching questions, suggestions, or things you've always wondered about IL, do let me know.

    Read the article

  • SSAS Maestro Training in July 2012 #ssasmaestro #ssas

    - by Marco Russo (SQLBI)
    A few hours ago Chris Webb blogged about SSAS Maestro and I’d like to propagate the news, adding also some background info. SSAS Maestro is the premier certification on Analysis Services that selects the best experts in Analysis Services around the world. In 2011 Microsoft organized two rounds of training/exams for SSAS Maestros and up to now only 11 people from the first wave have been announced – around 10% of attendees of the course! In the next few days the new Maestros from the second round should be announced and this long process is caused by many factors that I’m going to explain. First, the course is just a step in the process. Before the course you receive a list of topics to study, including the slides of the course. During the course, students receive a lot of information that might not have been included in the slides and the best part of the course is class interaction. Students are expected to bring their experience to the table and comparing case studies, experiences and having long debates is an important part of the learning process. And it is also a part of the evaluation: good questions might be also more important than good answers! Finally, after the course, students have their homework and this may require one or two months to be completed. After that, a long (very long) evaluation process begins, taking into account homework, labs, participation… And for this reason the final evaluation may arrive months later after the course. We are going to improve and shorten this process with the next courses. The first wave of SSAS Maestro had been made by invitation only and now the program is opening, requiring a fee to participate in order to cover the cost of preparation, training and exam. The number of attendees will be limited and candidates will have to send their CV in order to be admitted to the course. Only experienced Analysis Services developers will be able to participate to this challenging program. So why you should do that? Well, only 10% of students passed the exam until now. So if you need 100% guarantee to pass the exam, you need to study a lot, before, during and after the course. But the course by itself is a precious opportunity to share experience, create networking and learn mission-critical enterprise-level best practices that it’s hard to find written on books. Oh, well, many existing white papers are a required reading *before* the course! The course is now 5 days long, and every day can be *very* long. We’ll have lectures and discussions in the morning and labs in the afternoon/evening. Plus some more lectures in one or two afternoons. A heavy part of the course is about performance optimization, capacity planning, monitoring. This edition will introduce also Tabular models, and don’t expect something you might find in the SSAS Tabular Workshop – only performance, scalability monitoring and optimization will be covered, knowing Analysis Services is a requirement just to be accepted! I and Chris Webb will be the teachers for this edition. The course is expensive. Applying for SSAS Maestro will cost around 7000€ plus taxes (reduced to 5000€ for students of a previous SSAS Maestro edition). And you will be locked in a training room for the large part of the week. So why you should do that? Well, as I said, this is a challenging course. You will not find the time to check your email – the content is just too much interesting to think you can be distracted by something else. Another good reason is that this course will take place in Italy. Well, the course will take place in the brand new Microsoft Innovation Campus, but in general we’ll be able to provide you hints to get great food and, if you are willing to attach one week-end to your trip, there are plenty of places to visit (and I’m not talking about the classic Rome-Florence-Venice) – you might really need to relax after such a week! Finally, the marking process after the course will be faster – we’d like to complete the evaluation within three months after the course, considering that 1-2 months might be required to complete the homework. If at this point you are not scared: registration will open in mid-April, but you can already write to [email protected] sending your CV/resume and a short description of your level of SSAS knowledge and experience. The selection process will start early and you may want to put your admission form on top of the FIFO queue!

    Read the article

  • What Counts For a DBA: Simplicity

    - by Louis Davidson
    Too many computer processes do an apparently simple task in a bizarrely complex way. They remind me of this strip by one of my favorite artists: Rube Goldberg. In order to keep the boss from knowing one was late, a process is devised whereby the cuckoo clock kisses a live cuckoo bird, who then pulls a string, which triggers a hat flinging, which in turn lands on a rod that removes a typewriter cover…and so on. We rely on creating automated processes to keep on top of tasks. DBAs have a lot of tasks to perform: backups, performance tuning, data movement, system monitoring, and of course, avoiding being noticed.  Every day, there are many steps to perform to maintain the database infrastructure, including: checking physical structures, re-indexing tables where needed, backing up the databases, checking those backups, running the ETL, and preparing the daily reports and yes, all of these processes have to complete before you can call it a day, and probably before many others have started that same day. Some of these tasks are just naturally complicated on their own. Other tasks become complicated because the database architecture is excessively rigid, and we often discover during “production testing” that certain processes need to be changed because the written requirements barely resembled the actual customer requirements.   Then, with no time to change that rigid structure, we are forced to heap layer upon layer of code onto the problematic processes. Instead of a slight table change and a new index, we end up with 4 new ETL processes, 20 temp tables, 30 extra queries, and 1000 lines of SQL code.  Report writers then need to build reports and make magical numbers appear from those toxic data structures that are overly complex and probably filled with inconsistent data. What starts out as a collection of fairly simple tasks turns into a Goldbergian nightmare of daily processes that are likely to cause your dinner to be interrupted by the smartphone doing the vibration dance that signifies trouble at the mill. So what to do? Well, if it is at all possible, simplify the problem by either going into the code and refactoring the complex code to simple, or taking all of the processes and simplifying them into small, independent, easily-tested steps.  The former approach usually requires an agreement on changing underlying structures that requires countless mind-numbing meetings; while the latter can generally be done to any complex process without the same frustration or anger, though it will still leave you with lots of steps to complete, the ability to test each step independently will definitely increase the quality of the overall process (and with each step reporting status back, finding an actual problem within the process will be definitely less unpleasant.) We all know the principle behind simplifying a sequence of processes because we learned it in math classes in our early years of attending school, starting with elementary school. In my 4 years (ok, 9 years) of undergraduate work, I remember pretty much one thing from my many math classes that I apply daily to my career as a data architect, data programmer, and as an occasional indentured DBA: “show your work”. This process of showing your work was my first lesson in simplification. Each step in the process was in fact, far simpler than the entire process.  When you were working an equation that took both sides of 4 sheets of paper, showing your work was important because the teacher could see every step, judge it, and mark it accordingly.  So often I would make an error in the first few lines of a problem which meant that the rest of the work was actually moving me closer to a very wrong answer, no matter how correct the math was in the subsequent steps. Yet, when I got my grade back, I would sometimes be pleasantly surprised. I passed, yet missed every problem on the test. But why? While I got the fact that 1+1=2 wrong in every problem, the teacher could see that I was using the right process. In a computer process, the process is very similar. We take complex processes, show our work by storing intermediate values, and test each step independently. When a process has 100 steps, each step becomes a simple step that is tested and verified, such that there will be 100 places where data is stored, validated, and can be checked off as complete. If you get step 1 of 100 wrong, you can fix it and be confident (that if you did your job of testing the other steps better than the one you had to repair,) that the rest of the process works. If you have 100 steps, and store the state of the process exactly once, the resulting testable chunk of code will be far more complex and finding the error will require checking all 100 steps as one, and usually it would be easier to find a specific needle in a stack of similarly shaped needles.  The goal is to strive for simplicity either in the solution, or at least by simplifying every process down to as many, independent, testable, simple tasks as possible.  For the tasks that really can’t be done completely independently, minimally take those tasks and break them down into simpler steps that can be tested independently.  Like working out division problems longhand, have each step of the larger problem verified and tested.

    Read the article

  • SQL SERVER – Beginning New Weekly Series – Memory Lane – #001

    - by pinaldave
    I am introducing a new series today.  This series is called “Memory Lane.”  From the last six years and 2,300 articles, there are fantastic articles I keep revisiting.  Sometimes when I read old blog posts I think I should have included something or added a bit more to the topic.  But for many articles, I still feel they are fantastic (even after six years) and could be read again and again. I have also found that after six years of blogging, readers will write to me and say “Pinal, why don’t you write about X, Y or Z.”  The answer is: I already did!  It is here on the blog, or in the comments, or possibly in one of my books.  The solution has always been there, it is simply a matter of finding it and presenting it again.  That is why I have created Memory Lane.  I will be listing the best articles from the same week of the past six years.  You will find plenty of reading material every Saturday from articles of SQLAuthority past. Here is the list of curetted articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2006 Query to Display Foreign Key Relationships and Name of the Constraint for Each Table in Database My blogging journey began with this blog post. As many of you know my journey began with creating a repository of my scripts. This was very first script which I had written to find out foreign key relationship and constraints. The same query was updated later on using the new SYS schema modification in SQL Server. Version 1: Using sys.schema Version 2: Using sys.schema and additional columns 2007 Milestone Posts – 1 Year (365 blogs) and 1 Million Views When I reached 1st week of Nov in 2007 SQLAuthority.com blog had around 365 blog posts and 1 Million Views. I was not obsessed with the statistics before but this was indeed an interesting moment for me as I was blogging for myself and did not realize that so many people are reading my blog. In year 2006 there were not many bloggers so blogging was new to me as well. I was learning it as I go. 2008 Stored Procedure WITH ENCRYPTION and Execution Plan If you have stored procedure and its code is encrypted when you execute it what will be displayed in the execution plan. There are two kinds of execution plans 1) Estimated and 2) Actual. It will be indeed interesting to know what is displayed in both the cases when Stored Procedure is encrypted. What is your guess? Now go ahead and click on here and figure out your answer. If the user is not able to login into SQL Server due to any error or issues there were two different blog post addresses the same issue here and here. 2009 It seems like Nov is the month of SQLPASS month. In 2009 on the same week I was in USA attending SQLPASS event. I had a fantastic experience attending the event. Here are the blog posts covering the subject Day 1, Day 2, Day 3, Day 4 2010 Finding the last backup time for all the databases This little script is very powerful and instantly gives details when was the last time your database backup performed. If you are reading this blog post – I say just go ahead and check if everything is alright on your server and you have all the necessary latest backup. It is better to be safe than sorrow. Version 1: Above script was improved to get more details about the database Version 2: This version of the script will include pretty much have all the backup related information in a single script. Do not miss to save it for future use. Are you a Database Administrator or a Database Developer? Three years ago I created a very small survey and the results which I have received are very interesting. The question was asking what is the profile of the visitor of that blog post and I noticed that DBA and Developers have balanced with little inclination towards Developers. Have you voted so far? If not, go ahead! 2011 New Book Released – SQL Server Interview Questions And Answers One year ago, on November 3, 2011 I published my book SQL Server Interview Questions and Answers.  The book has a lot of great reviews, and we have even received emails telling us this book was a life changer because it helped get them a great new job.  I don’t think anyone can get a job just from my book.  It was the individual who studied hard and took it seriously, and was determined to learn something new.  The book might have helped guide them and show them the topics to study, but they spent their own energy on it.  It was their own skills that helped them pass the exam. So, in this very first installment, I would like to thank the readers for accepting our book, for giving it great reviews and for using it and sharing it.  Our goal in writing this book was to help others, and it seems like we succeeded. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Justifiable Perks.

    - by Phil Factor
        I was once the director of a start-up IT Company, and had the task of recruiting a proportion of the management team. As my background was in IT management, I was rather more familiar with recruiting Geeks for technology jobs, but here, one of my early tasks was interviewing a Marketing Director.  The small group of financiers had suggested a rather strange Irishman called  Halleran.  From my background in City of London dealing-rooms, I was slightly unprepared for the experience of interviewing anyone wearing a pink suit. Many of my older City colleagues would have required resuscitation after seeing his white leather shoes. However, nobody will accuse me of prejudging an interviewee. After all, many Linux experts who I’ve come to rely on have appeared for interview dressed as hobbits. In fact, the interview went well, and we had even settled his salary.  I was somewhat unprepared for the coda.    ‘And I will need to be provided with a Ferrari  by the company.’    ‘Hmm. That seems reasonable.’    Initially, he looked startled, and then a slow smile of victory spread across his face.    ‘What colour would you like?’ I asked genially.    ‘It has to be red.’ He looked very earnest on this point.    ‘Fine. I have to go past Hamleys on the way home this evening, so I’ll pick one up then for you.’    ‘Er.. Hamley’s is a toyshop, not a Ferrari Dealership.’    I stared at him in bafflement for a few seconds. ‘You’re not seriously asking for a real Ferrari are you?’     ‘Well, yes. Not for my own sake, you understand. I’d much prefer a simple run-about, but my position demands it. How could I maintain the necessary status in the office without one? How could I do my job in marketing when my grey Datsun was all too visible in the car Park? It is a tool of the job.’    ‘Excuse me a moment, but I must confer with the MD’    I popped out to see Chris, the MD. ‘Chris, I’m interviewing a lunatic in a pink suit who is trying to demand that a Ferrari is a precondition of his employment. I tried the ‘misunderstanding trick’ but it didn’t faze him.’     ‘Sorry, Phil, but we’ve got to hire him. The VCs insist on it. You’ve got to think of something that doesn’t involve committing to the purchase of a Ferrari. Current funding barely covers the rent for the building.’    ‘OK boss. Leave it to me.’    On return, I slapped O’Halleran’s file on the table with a genial, paternalistic smile. ‘Of course you should have a Ferrari. The only trouble is that it will require a justification document that can be presented to the board. I’m sure you’ll have no problem in preparing this document in the required format.’ The initial look of despair was quickly followed by a bland look of acquiescence. He had, earlier in the interview, argued with great eloquence his skill in preparing the tiresome documents that underpin the essential corporate and government deals that were vital to the success of this new enterprise. The justification of a Ferrari should be a doddle.     After the interview, Chris nervously asked how I’d fared.     ‘I think it is all solved.’    ‘… without promising a Ferrari, I hope.’    ‘Well, I did actually; on condition he justified it in writing.’    Chris issued a stream of invective. The strain of juggling the resources in an underfunded startup was beginning to show.    ‘Don’t worry. In the unlikely event of him coming back with the required document, I’ll give him mine.’    ‘Yours?’ He strode over to the window to stare down at the car park.    He needn’t have worried: I knew that his breed of marketing man could more easily lay an ostrich egg than to prepare a decent justification document. My Ferrari is still there at the back of my garage. Few know of the Ferrari cultivator, a simple inexpensive motorized device designed for the subsistence farmers of southern Italy. It is the very devil to start, but it creates a perfect tilth for the seedbed.

    Read the article

  • Can't connect to Wired Network after installing 12.04

    - by ezz9
    I have installed 12.04 into a used HP Compaq DC 7100 CMT. Plugged in LAN cable into the computer and it says network disconnected. from what I understand on the things I've read, it's not getting the address right, maybe it's just a guess (hardware address 00:16:35:78:47:bb). I know the LAN cable is working I can get on the net with the old computer. (Old computer is using device MAC address; Auto eth0 00:11:11:E6:4F:FE). I have put this address into the newer HP and it shows last used (minutes ago) but no Internet sever not found. I tried the hardware address it says never. I feel and think this should be easy to fix. But I just don't know. Here is the info everyone has asked for, but they never say what I should do. sudo lshw -C network; rfkill list; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; uname -a; ifconfig; route -n *-network description: ethernet interface product; NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:40:00.0 logical name: eth0 verson: 01 serial: 00:16:35:78:47:bb size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000-fd configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion= 3.121 duplex=full firmware=5751-v3.29a latency=0 link=yes multicast=yes port=twi sted pair speed=100Mbit/s resources: irq:17 memory:f0400000-f040ffff auto lo iface lo inet loopback DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION= "Ubuntu 12.04 LTS" 00:00.0 host bridge [0600]: Inter Corporation 82915G/P/GV/GL/PL/910GL Memory Con troller Hub [8086:2580] (rev 04) 00.02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL inte grated Graphics Controller [8086:2582] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03) 00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #1 [8086:2658] (rev 03) 00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #2 [8086:2659] (rev 03) 00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #3 [8086:265a] (rev 03) 00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #4 [8086:265b] (rev 03) 00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB2 UHCI Controller [8086:265c] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI bridge [8086:244e] (rev d 3) 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/ FRW (ICH6 Family) AC'97 Autio conrtroller [8086:266e] (rev 03) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/RF (ICH6/ICH6R) LPC Interfa ce Bridge [8086:2640] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 fami ly) IDE Controller [8086:266f] (rev 03) 00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Con troller [8086:2651] (rev 03) 40:00.0 Ethernet controller [0200]: Broadcom Corporation NetXreme BCM5751 Gigab it Ethernet PCI Express [14e4:1677} (rev 01) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Linux bob-desktop 3.2.0-23-generic-pae #36-Ubuntu SMP Tpr 10 22:19:09 UTC 20 12 i686 i686 i386 GNU/Linux eth0 Link encap:Ethernet HWaddr 00:16:35:78:47:bb inet6 addr: fe80::216:35ff:47bb/64 Scope:link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2517 errors:0 dropped:0 overruns:0 frame:0 TX packets:164 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:164508 (164.5 KB) TX bytes: 40884 (40.0 KB) Interrupt:17 lo Link encap:Local loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3290 errors:0 dropped:0 overruns:0 frame:0 TX packets:3290 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen: 0 RX bytes:267212 (267.2 KB) TX bytes: 267212 (267.2 KB) Kernel Ip routing table Destination Gateway Genmask Flags Metric Ref Use Iface ran this sudo dhclient eth0 no reply ran this ip addr 1: lo <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST ,MULTICAST ,UP ,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/enter 00:16:35:78:47:BB brd ff:ff:ff:ff:ff:ff inet 169.254.7.172/16 brd 169.254.255.255 scope link eth0:avahi inet6 fe80::216:35ff:fe78:47bb/64 scope link valid_lft forever preferred_lft forever Help please.

    Read the article

  • SQL SERVER – ?Finding Out What Changed in a Deleted Database – Notes from the Field #041

    - by Pinal Dave
    [Note from Pinal]: This is a 41th episode of Notes from the Field series. The real world is full of challenges. When we are reading theory or book, we sometimes do not realize how real world reacts works and that is why we have the series notes from the field, which is extremely popular with developers and DBA. Let us talk about interesting problem of how to figure out what has changed in the DELETED database. Well, you think I am just throwing the words but in reality this kind of problems are making our DBA’s life interesting and in this blog post we have amazing story from Brian Kelley about the same subject. In this episode of the Notes from the Field series database expert Brian Kelley explains a how to find out what has changed in deleted database. Read the experience of Brian in his own words. Sometimes, one of the hardest questions to answer is, “What changed?” A similar question is, “Did anything change other than what we expected to change?” The First Place to Check – Schema Changes History Report: Pinal has recently written on the Schema Changes History report and its requirement for the Default Trace to be enabled. This is always the first place I look when I am trying to answer these questions. There are a couple of obvious limitations with the Schema Changes History report. First, while it reports what changed, when it changed, and who changed it, other than the base DDL operation (CREATE, ALTER, DELETE), it does not present what the changes actually were. This is not something covered by the default trace. Second, the default trace has a fixed size. When it hits that size, the changes begin to overwrite. As a result, if you wait too long, especially on a busy database server, you may find your changes rolled off. But the Database Has Been Deleted! Pinal cited another issue, and that’s the inability to run the Schema Changes History report if the database has been dropped. Thankfully, all is not lost. One thing to remember is that the Schema Changes History report is ultimately driven by the Default Trace. As you may have guess, it’s a trace, like any other database trace. And the Default Trace does write to disk. The trace files are written to the defined LOG directory for that SQL Server instance and have a prefix of log_: Therefore, you can read the trace files like any other. Tip: Copy the files to a working directory. Otherwise, you may occasionally receive a file in use error. With the Default Trace files, if you ask the question early enough, you can see the information for a deleted database just the same as any other database. Testing with a Deleted Database: Here’s a short script that will create a database, create a schema, create an object, and then drop the database. Without the database, you can’t do a standard Schema Changes History report. CREATE DATABASE DeleteMe; GO USE DeleteMe; GO CREATE SCHEMA Test AUTHORIZATION dbo; GO CREATE TABLE Test.Foo (FooID INT); GO USE MASTER; GO DROP DATABASE DeleteMe; GO This sets up the perfect situation where we can’t retrieve the information using the Schema Changes History report but where it’s still available. Finding the Information: I’ve sorted the columns so I can see the Event Subclass, the Start Time, the Database Name, the Object Name, and the Object Type at the front, but otherwise, I’m just looking at the trace files using SQL Profiler. As you can see, the information is definitely there: Therefore, even in the case of a dropped/deleted database, you can still determine who did what and when. You can even determine who dropped the database (loginame is captured). The key is to get the default trace files in a timely manner in order to extract the information. If you want to get started with performance tuning and database security with the help of experts, read more over at Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • IndyTechFest Recap

    - by Johnm
    The sun had yet to raise above the horizon on Saturday, May 22nd and I was traveling toward the location of the 2010 IndyTechFest. In my freshly awaken, and pre-coffee, state I reflected on the months that preceded this day and how quickly they slipped away. The big day had finally come and the morning dew glistened with a unique brightness that morning. What is this all about? For those who are unfamiliar with IndyTechFest, it is a regional conference held in Indianapolis and hosted by the Indianapolis .NET Developers Association (IndyNDA) and the Indianapolis Professional Association for SQL Server (IndyPASS).  The event presents multiple tracks and sessions covering subjects such as Business Intelligence,  Database Administration, .NET Development, SharePoint Development, Windows Mobile Development as well as non-Microsoft topics such as Lean and MongoDB. This year's event was the third hosting of IndyTechFest. No man is an island No event such as IndyTechFest is executed by a single person. My fellow co-founders, with their highly complementary skill sets and philanthropy make the process very enjoyable. Our amazing volunteers and their aid were indispensible. The generous financial support of our sponsors that made the event and fabulous prizes possible. The spectacular line up of speakers who came from near and far to donate their time and knowledge. Our beloved attendees who sacrificed the first sunny Saturday in weeks to expand their skill sets and network with their peers. We are deeply appreciative. Challenges in preparation With the preparation of any event comes challenges. It is these challenges that makes the process of planning an event so interesting. This year's largest challenge was the location of the event. In the past two years IndyTechFest was held at the Gene B. Glick Junior Achievement Center in Indianapolis. This facility has been the hub of the Indy technical community for many years. As the big day drew near, the facility's availability came into question due to some recent changes that had occurred with those who operated the facility. We began our search for an alternative option. Thankfully, the Marriott Indianapolis East was available, was very spacious and willing to work within the range of our budget. Within days of our event, the decision to move proved to be wise since the prior location had begun renovations to the interior. Whew! Always trust your gut. Every day it's getting better At the ending of each year, we huddle together, review the evaluations and identify an area in which the event could improve. This year's big opportunity for improvement resided in the prize give-away portion at the end of the day. In the 2008 event, admittedly, this portion was rather chaotic, rushed and disorganized. This year, we broke the drawing into two sections, of which each attendee received two tickets. The first ticket was a drawing for the mountain of books that were given away. The second ticket was a drawing for the big prizes, the 2 Xboxes, 3 laptops and iPad. We peppered the ticket drawings with gift card raffles and tossing t-shirts into the audience. If at first you don't succeed, try and try again Each year of IndyTechFest, we have offered a means for ad-hoc sessions or discussion groups to pop-up. To our disappointment it was something that never quite took off. We have always believed that this unique type of session was valuable and wanted to figure out a way to make it work for this year. A special thanks to Alan Stevens, who took on and facilitated the "open space" track and made it an official success. Share with your tweety When the attendee badges were designed we decided to place an emphasis on the attendee's Twitter account as well as the events hash-tag (#IndyTechFest) to encourage some real-time buzz during the day. At the host table we displayed a Twitter feed for all to enjoy. It was quite successful and encouraging use of social media. My badge was missing my Twitter account since it was recently changed. For those who care to follow my rather sparse tweets, my address is @johnnydata. Man, this is one long blog post! All in all it was a very successful event. It is always great to see new faces and meet old friends. The planning for the 2011 IndyTechFest will kick off very soon. We have more capacity for future growth and a truck full of great ideas. Stay tuned!

    Read the article

  • Stumbling Through: Making a case for the K2 Case Management Framework

    I have recently attended a three-day training session on K2s Case Management Framework (CMF), a free framework built on top of K2s blackpearl workflow product, and I have come away with several different impressions for some of the different aspects of the framework.  Before we get into the details, what is the Case Management Framework?  It is essentially a suite of tools that, when used together, solve many common workflow scenarios.  The tool has been developed over time by K2 consultants that have realized they tend to solve the same problems over and over for various clients, so they attempted to package all of those common solutions into one framework.  Most of these common problems involve workflow process that arent necessarily direct and would tend to be difficult to model.  Such solutions could be achieved in blackpearl alone, but the workflows would be complex and difficult to follow and maintain over time.  CMF attempts to simplify such scenarios not so much by black-boxing the workflow processes, but by providing different points of entry to the processes allowing them to be simpler, moving the complexity to a middle layer.  It is not a solution in and of itself, development is still required to tie the pieces together. CMF is under continuous development, both a plus and a minus in that bugs are fixed quickly and features added regularly, but it may be difficult to know which versions are the most stable.  CMF is not an officially supported K2 product, which means you will not get technical support but you will get access to the source code. The example given of a business process that would fit well into CMF is that of a file cabinet, where each folder in said file cabinet is a case that contains all of the data associated with one complaint/customer/incident/etc. and various users can access that case at any time and take one of a set of pre-determined actions on it.  When I was given that example, my first thought was that any workflow I have ever developed in the past could be made to fit this model there must be more than just this model to help decide if CMF is the right solution.  As the training went on, we learned that one of the key features of CMF is SharePoint integration as each case gets a SharePoint site created for it, and there are a number of excellent web parts that can be used to design a portal for users to get at all the information on their cases.  While CMF does not require SharePoint, without it you will be missing out on a huge portion of functionality that CMF offers.  My opinion is that without SharePoint integration, you may as well write your workflows and other components the old fashioned way. When I heard that each case gets its own SharePoint site created for it, warning bells immediately went off in my head as I felt that depending on the data load, a CMF enabled solution could quickly overwhelm SharePoint with thousands of sites so we have yet another deciding factor for CMF:  Just how many cases will your solution be creating?  While it is not necessary to use the site-per-case model, it is one of the more useful parts of the framework.  Without it, you are losing a big chunk of what CMF has to offer. When it comes to developing on top of the Case Management Framework, it becomes a matter of configuring what makes up a case, what can be done to a case, where each action on a case should take the user, and then typing up actions to case statuses.  This last step is one that I immediately warmed up to, as just about every workflow Ive designed in the past needed some sort of mapping table to set the status of a work item based on the action being taken definitely one of those common solutions that it is good to see rolled up into a re-useable entity (and it gets a nice configuration UI to boot!).  This concept is a little different than traditional workflow design, in that you dont have to think of an end-to-end process around passing a case along a path, rather, you must envision the case as central object with workflow threads branching off of it and doing their own thing with the case data.  Certainly there can be certain workflow threads that get rather complex, but the idea is that they RELATE to the case, they dont BECOME the case (though it is still possible with action->status mappings to prevent certain actions in certain cases, so it isnt always a wide-open free for all of actions on a case). I realize that this description of the Case Management Framework merely scratches the surface on what the product actually can do, and I dont think Ive conclusively defined for what sort of business scenario you can make a case for Case Management Framework.  What I do hope to have accomplished with this post is to raise awareness of CMF there is a (free!) product out there that could potentially simplify a tangled workflow process and give (for free!) a very useful set of SharePoint web parts and a nice set of (free!) reports.  The best way to see if it will truly fit your needs is to give it a try did I mention it is FREE?  Er, ok, so it is free, but only obtainable at this time for K2 partnersDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Explaining Explain Plan Notes for Auto DOP

    - by jean-pierre.dijcks
    I've recently gotten some questions around "why do I not see a parallel plan" while Auto DOP is on (I think)...? It is probably worthwhile to quickly go over some of the ways to find out what Auto DOP was thinking. In general, there is no need to go tracing sessions and look under the hood. The thing to start with is to do an explain plan on your statement and to look at the parameter settings on the system. Parameter Settings to Look At First and foremost, make sure that parallel_degree_policy = AUTO. If you have that parameter set to LIMITED you will not have queuing and we will only do the auto magic if your objects are set to default parallel (so no degree specified). Next you want to look at the value of parallel_degree_limit. It is typically set to CPU, which in default settings equates to the Default DOP of the system. If you are testing Auto DOP itself and the impact it has on performance you may want to leave it at this CPU setting. If you are running concurrent statements you may want to give this some more thoughts. See here for more information. In general, do stick with either CPU or with a specific number. For now avoid the IO setting as I've seen some mixed results with that... In 11.2.0.2 you should also check that IO Calibrate has been run. Best to simply do a: SQL> select * from V$IO_CALIBRATION_STATUS; STATUS        CALIBRATION_TIME ------------- ---------------------------------------------------------------- READY         04-JAN-11 10.04.13.104 AM You should see that your IO Calibrate is READY and therefore Auto DOP is ready. In any case, if you did not run the IO Calibrate step you will get the following note in the explain plan: Note -----    - automatic DOP: skipped because of IO calibrate statistics are missing One more note on calibrate_io, if you do not have asynchronous IO enabled you will see:  ERROR at line 1: ORA-56708: Could not find any datafiles with asynchronous i/o capability ORA-06512: at "SYS.DBMS_RMIN", line 463 ORA-06512: at "SYS.DBMS_RESOURCE_MANAGER", line 1296 ORA-06512: at line 7 While this is changed in some fixes to the calibrate procedure, you should really consider switching asynchronous IO on for your data warehouse. Explain Plan Explanation To see the notes that are shown and explained here (and the above little snippet ) you can use a simple explain plan mechanism. There should  be no need to add +parallel etc. explain plan for <statement> SELECT PLAN_TABLE_OUTPUT FROM TABLE(DBMS_XPLAN.DISPLAY()); Auto DOP The note structure displaying why Auto DOP did not work (with the exception noted above on IO Calibrate) is like this: Automatic degree of parallelism is disabled: <reason> These are the reason codes: Parameter -  parallel_degree_policy = manual which will not allow Auto DOP to kick in  Hint - One of the following hints are used NOPARALLEL, PARALLEL(1), PARALLEL(MANUAL) Outline - A SQL outline of an older version (before 11.2) is used SQL property restriction - The statement type does not allow for parallel processing Rule-based mode - Instead of the Cost Based Optimizer the system is using the RBO Recursive SQL statement - The statement type does not allow for parallel processing pq disabled/pdml disabled/pddl disabled - For some reason (alter session?) parallelism is disabled Limited mode but no parallel objects referenced - your parallel_degree_policy = LIMITED and no objects in the statement are decorated with the default PARALLEL degree. In most cases all objects have a specific degree in which case Auto DOP will honor that degree. Parallel Degree Limited When Auto DOP does it works you may see the cap you imposed with parallel_degree_limit showing up in the note section of the explain plan: Note -----    - automatic DOP: Computed Degree of Parallelism is 16 because of degree limit This is an obvious indication that your are being capped for this statement. There is one quite interesting one that happens when you are being capped at DOP = 1. First of you get a serial plan and the note changes slightly in that it does not indicate it is being capped (we hope to update the note at some point in time to be more specific). It right now looks like this: Note -----    - automatic DOP: Computed Degree of Parallelism is 1 Dynamic Sampling With 11.2.0.2 you will start seeing another interesting change in parallel plans, and since we are talking about the note section here, I figured we throw this in for good measure. If we deem the parallel (!) statement complex enough, we will enact dynamic sampling on your query. This happens as long as you did not change the default for dynamic sampling on the system. The note looks like this: Note ----- - dynamic sampling used for this statement (level=5)

    Read the article

  • Cardinality Estimation Bug with Lookups in SQL Server 2008 onward

    - by Paul White
    Cost-based optimization stands or falls on the quality of cardinality estimates (expected row counts).  If the optimizer has incorrect information to start with, it is quite unlikely to produce good quality execution plans except by chance.  There are many ways we can provide good starting information to the optimizer, and even more ways for cardinality estimation to go wrong.  Good database people know this, and work hard to write optimizer-friendly queries with a schema and metadata (e.g. statistics) that reduce the chances of poor cardinality estimation producing a sub-optimal plan.  Today, I am going to look at a case where poor cardinality estimation is Microsoft’s fault, and not yours. SQL Server 2005 SELECT th.ProductID, th.TransactionID, th.TransactionDate FROM Production.TransactionHistory AS th WHERE th.ProductID = 1 AND th.TransactionDate BETWEEN '20030901' AND '20031231'; The query plan on SQL Server 2005 is as follows (if you are using a more recent version of AdventureWorks, you will need to change the year on the date range from 2003 to 2007): There is an Index Seek on ProductID = 1, followed by a Key Lookup to find the Transaction Date for each row, and finally a Filter to restrict the results to only those rows where Transaction Date falls in the range specified.  The cardinality estimate of 45 rows at the Index Seek is exactly correct.  The table is not very large, there are up-to-date statistics associated with the index, so this is as expected. The estimate for the Key Lookup is also exactly right.  Each lookup into the Clustered Index to find the Transaction Date is guaranteed to return exactly one row.  The plan shows that the Key Lookup is expected to be executed 45 times.  The estimate for the Inner Join output is also correct – 45 rows from the seek joining to one row each time, gives 45 rows as output. The Filter estimate is also very good: the optimizer estimates 16.9951 rows will match the specified range of transaction dates.  Eleven rows are produced by this query, but that small difference is quite normal and certainly nothing to worry about here.  All good so far. SQL Server 2008 onward The same query executed against an identical copy of AdventureWorks on SQL Server 2008 produces a different execution plan: The optimizer has pushed the Filter conditions seen in the 2005 plan down to the Key Lookup.  This is a good optimization – it makes sense to filter rows out as early as possible.  Unfortunately, it has made a bit of a mess of the cardinality estimates. The post-Filter estimate of 16.9951 rows seen in the 2005 plan has moved with the predicate on Transaction Date.  Instead of estimating one row, the plan now suggests that 16.9951 rows will be produced by each clustered index lookup – clearly not right!  This misinformation also confuses SQL Sentry Plan Explorer: Plan Explorer shows 765 rows expected from the Key Lookup (it multiplies a rounded estimate of 17 rows by 45 expected executions to give 765 rows total). Workarounds One workaround is to provide a covering non-clustered index (avoiding the lookup avoids the problem of course): CREATE INDEX nc1 ON Production.TransactionHistory (ProductID) INCLUDE (TransactionDate); With the Transaction Date filter applied as a residual predicate in the same operator as the seek, the estimate is again as expected: We could also force the use of the ultimate covering index (the clustered one): SELECT th.ProductID, th.TransactionID, th.TransactionDate FROM Production.TransactionHistory AS th WITH (INDEX(1)) WHERE th.ProductID = 1 AND th.TransactionDate BETWEEN '20030901' AND '20031231'; Summary Providing a covering non-clustered index for all possible queries is not always practical, and scanning the clustered index will rarely be optimal.  Nevertheless, these are the best workarounds we have today. In the meantime, watch out for poor cardinality estimates when a predicate is applied as part of a lookup. The worst thing is that the estimate after the lookup join in the 2008+ plans is wrong.  It’s not hopelessly wrong in this particular case (45 versus 16.9951 is not the end of the world) but it easily can be much worse, and there’s not much you can do about it.  Any decisions made by the optimizer after such a lookup could be based on very wrong information – which can only be bad news. If you think this situation should be improved, please vote for this Connect item. © 2012 Paul White – All Rights Reserved twitter: @SQL_Kiwi email: [email protected]

    Read the article

  • Reference Data Management and Master Data: Are Relation ?

    - by Mala Narasimharajan
    Submitted By:  Rahul Kamath  Oracle Data Relationship Management (DRM) has always been extremely powerful as an Enterprise Master Data Management (MDM) solution that can help manage changes to master data in a way that influences enterprise structure, whether it be mastering chart of accounts to enable financial transformation, or revamping organization structures to drive business transformation and operational efficiencies, or restructuring sales territories to enable equitable distribution of leads to sales teams following the acquisition of new products, or adding additional cost centers to enable fine grain control over expenses. Increasingly, DRM is also being utilized by Oracle customers for reference data management, an emerging solution space that deserves some explanation. What is reference data? How does it relate to Master Data? Reference data is a close cousin of master data. While master data is challenged with problems of unique identification, may be more rapidly changing, requires consensus building across stakeholders and lends structure to business transactions, reference data is simpler, more slowly changing, but has semantic content that is used to categorize or group other information assets – including master data – and gives them contextual value. In fact, the creation of a new master data element may require new reference data to be created. For example, when a European company acquires a US business, chances are that they will now need to adapt their product line taxonomy to include a new category to describe the newly acquired US product line. Further, the cross-border transaction will also result in a revised geo hierarchy. The addition of new products represents changes to master data while changes to product categories and geo hierarchy are examples of reference data changes.1 The following table contains an illustrative list of examples of reference data by type. Reference data types may include types and codes, business taxonomies, complex relationships & cross-domain mappings or standards. Types & Codes Taxonomies Relationships / Mappings Standards Transaction Codes Industry Classification Categories and Codes, e.g., North America Industry Classification System (NAICS) Product / Segment; Product / Geo Calendars (e.g., Gregorian, Fiscal, Manufacturing, Retail, ISO8601) Lookup Tables (e.g., Gender, Marital Status, etc.) Product Categories City à State à Postal Codes Currency Codes (e.g., ISO) Status Codes Sales Territories (e.g., Geo, Industry Verticals, Named Accounts, Federal/State/Local/Defense) Customer / Market Segment; Business Unit / Channel Country Codes (e.g., ISO 3166, UN) Role Codes Market Segments Country Codes / Currency Codes / Financial Accounts Date/Time, Time Zones (e.g., ISO 8601) Domain Values Universal Standard Products and Services Classification (UNSPSC), eCl@ss International Classification of Diseases (ICD) e.g., ICD9 à IC10 mappings Tax Rates Why manage reference data? Reference data carries contextual value and meaning and therefore its use can drive business logic that helps execute a business process, create a desired application behavior or provide meaningful segmentation to analyze transaction data. Further, mapping reference data often requires human judgment. Sample Use Cases of Reference Data Management Healthcare: Diagnostic Codes The reference data challenges in the healthcare industry offer a case in point. Part of being HIPAA compliant requires medical practitioners to transition diagnosis codes from ICD-9 to ICD-10, a medical coding scheme used to classify diseases, signs and symptoms, causes, etc. The transition to ICD-10 has a significant impact on business processes, procedures, contracts, and IT systems. Since both code sets ICD-9 and ICD-10 offer diagnosis codes of very different levels of granularity, human judgment is required to map ICD-9 codes to ICD-10. The process requires collaboration and consensus building among stakeholders much in the same way as does master data management. Moreover, to build reports to understand utilization, frequency and quality of diagnoses, medical practitioners may need to “cross-walk” mappings -- either forward to ICD-10 or backwards to ICD-9 depending upon the reporting time horizon. Spend Management: Product, Service & Supplier Codes Similarly, as an enterprise looks to rationalize suppliers and leverage their spend, conforming supplier codes, as well as product and service codes requires supporting multiple classification schemes that may include industry standards (e.g., UNSPSC, eCl@ss) or enterprise taxonomies. Aberdeen Group estimates that 90% of companies rely on spreadsheets and manual reviews to aggregate, classify and analyze spend data, and that data management activities account for 12-15% of the sourcing cycle and consume 30-50% of a commodity manager’s time. Creating a common map across the extended enterprise to rationalize codes across procurement, accounts payable, general ledger, credit card, procurement card (P-card) as well as ACH and bank systems can cut sourcing costs, improve compliance, lower inventory stock, and free up talent to focus on value added tasks. Change Management: Point of Sales Transaction Codes and Product Codes In the specialty finance industry, enterprises are confronted with usury laws – governed at the state and local level – that regulate financial product innovation as it relates to consumer loans, check cashing and pawn lending. To comply, it is important to demonstrate that transactions booked at the point of sale are posted against valid product codes that were on offer at the time of booking the sale. Since new products are being released at a steady stream, it is important to ensure timely and accurate mapping of point-of-sale transaction codes with the appropriate product and GL codes to comply with the changing regulations. Multi-National Companies: Industry Classification Schemes As companies grow and expand across geographies, a typical challenge they encounter with reference data represents reconciling various versions of industry classification schemes in use across nations. While the United States, Mexico and Canada conform to the North American Industry Classification System (NAICS) standard, European Union countries choose different variants of the NACE industry classification scheme. Multi-national companies must manage the individual national NACE schemes and reconcile the differences across countries. Enterprises must invest in a reference data change management application to address the challenge of distributing reference data changes to downstream applications and assess which applications were impacted by a given change. References 1 Master Data versus Reference Data, Malcolm Chisholm, April 1, 2006.

    Read the article

  • Database-as-a-Service on Exadata Cloud

    - by Gagan Chawla
    Note – Oracle Enterprise Manager 12c DBaaS is platform agnostic and is designed to work on Exadata/non-Exadata, physical/virtual, Oracle/non Oracle platforms and it’s not a mandatory requirement to use Exadata as the base platform. Database-as-a-Service (DBaaS) is an important trend these days and the top business drivers motivating customers towards private database cloud model include constant pressure to reduce IT Costs and Complexity, and also to be able to improve Agility and Quality of Service. The first step many enterprises take in their journey towards cloud computing is to move to a consolidated and standardized environment and Exadata being already a proven best-in-class popular consolidation platform, we are seeing now more and more customers starting to evolve from Exadata based platform into an agile self service driven private database cloud using Oracle Enterprise Manager 12c. Together Exadata Database Machine and Enterprise Manager 12c provides industry’s most comprehensive and integrated solution to transform from a typical silo’ed environment into enterprise class database cloud with self service, rapid elasticity and pay-per-use capabilities.   In today’s post, I’ll list down the important steps to enable DBaaS on Exadata using Enterprise Manager 12c. These steps are chalked down based on a recent DBaaS implementation from a real customer engagement - Project Planning - First step involves defining the scope of implementation, mapping functional requirements and objectives to use cases, defining high availability, network, security requirements, and delivering the project plan. In a Cloud project you plan around technology, business and processes all together so ensure you engage your actual end users and stakeholders early on in the project right from the scoping and planning stage. Setup your EM 12c Cloud Control Site – Once the project plan approval and sign off from stakeholders is achieved, refer to EM 12c Install guide and these are some important tips to follow during the site setup phase - Review the new EM 12c Sizing paper before you get started with install Cloud, Chargeback and Trending, Exadata plug ins should be selected to deploy during install Refer to EM 12c Administrator’s guide for High Availability, Security, Network/Firewall best practices and options Your management and managed infrastructure should not be combined i.e. EM 12c repository should not be hosted on same Exadata where target Database Cloud is to be setup Setup Roles and Users – Cloud Administrator (EM_CLOUD_ADMINISTRATOR), Self Service Administrator (EM_SSA_ADMINISTRATOR), Self Service User (EM_SSA_USER) are the important roles required for cloud lifecycle management. Roles and users are managed by Super Administrator via Setup menu –> Security option. For Self Service/SSA users custom role(s) based on EM_SSA_USER should be created and EM_USER, PUBLIC roles should be revoked during SSA user account creation. Configure Software Library – Cloud Administrator logs in and in this step configures software library via Enterprise menu –> provisioning and patching option and the storage location is OMS shared filesystem. Software Library is the centralized repository that stores all software entities and is often termed as ‘local store’. Setup Self Update – Self Update is one of the most innovative and cool new features in EM 12c framework. Self update can be accessed via Setup -> Extensibility option by Super Administrator and is the unified delivery mechanism to get all new and updated entities (Agent software, plug ins, connectors, gold images, provisioning bundles etc) in EM 12c. Deploy Agents on all Compute nodes, and discover Exadata targets – Refer to Exadata discovery cookbook for detailed walkthrough to ensure successful discovery of Exadata targets. Configure Privilege Delegation Settings – This step involves deployment of privilege setting template on all the nodes by Super Administrator via Setup menu -> Security option with the option to define whether to use sudo or powerbroker for all provisioning and patching operations. Provision Grid Infrastructure with RAC Database on Compute Nodes – Software is provisioned in this step via a provisioning profile using EM 12c database provisioning. In case of Exadata, Grid Infrastructure and RAC Database software is already deployed on compute nodes via OneCommand from Oracle, so SSA Administrator just needs to discover Oracle Homes and Listener as EM targets. Databases will be created as and when users request for databases from cloud. Customize Create Database Deployment Procedure – the actual database creation steps are "templatized" in this step by Self Service Administrator and the newly saved deployment procedure will be used during service template creation in next step. This is an important step and make sure you have locked all the required variables marked as locked as ‘Y’ in this table. Setup Self Service Portal – This step involves setting up of zones, user quotas, service templates, chargeback plan. The SSA portal is setup by Self Service Administrator via Setup menu -> Cloud -> Database option and following guided workflow. Refer to DBaaS cookbook for details. You also have an option to customize SSA login page via steps documented in EM 12c Cloud Administrator’s guide Final Checks – Define and document process guidelines for SSA users and administrators. Get your SSA users trained on Self Service Portal features and overall DBaaS model and SSA administrators should be familiar with Self Service Portal setup pieces, EM 12c database lifecycle management capabilities and overall EM 12c monitoring framework. GO LIVE – Announce rollout of Database-as-a-Service to your SSA users. Users can login to the Self Service Portal and request/monitor/view their databases in Exadata based database cloud. Congratulations! You just delivered a successful database cloud implementation project! In future posts, we will cover these additional useful topics around database cloud – DBaaS Implementation tips and tricks – right from setup to self service to managing the cloud lifecycle ‘How to’ enable real production databases copies in DBaaS with rapid provisioning in database cloud Case study of a customer who recently achieved success with their transformational journey from traditional silo’ed environment on to Exadata based database cloud using Enterprise Manager 12c. More Information – Podcast on Database as a Service using Oracle Enterprise Manager 12c Oracle Enterprise Manager 12c Installation and Administration guide, Cloud Administration guide DBaaS Cookbook Exadata Discovery Cookbook Screenwatch: Private Database Cloud: Set Up the Cloud Self-Service Portal Screenwatch: Private Database Cloud: Use the Cloud Self-Service Portal Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

    Read the article

  • Breaking through the class sealing

    - by Jason Crease
    Do you understand 'sealing' in C#?  Somewhat?  Anyway, here's the lowdown. I've done this article from a C# perspective, but I've occasionally referenced .NET when appropriate. What is sealing a class? By sealing a class in C#, you ensure that you ensure that no class can be derived from that class.  You do this by simply adding the word 'sealed' to a class definition: public sealed class Dog {} Now writing something like " public sealed class Hamster: Dog {} " you'll get a compile error like this: 'Hamster: cannot derive from sealed type 'Dog' If you look in an IL disassembler, you'll see a definition like this: .class public auto ansi sealed beforefieldinit Dog extends [mscorlib]System.Object Note the addition of the word 'sealed'. What about sealing methods? You can also seal overriding methods.  By adding the word 'sealed', you ensure that the method cannot be overridden in a derived class.  Consider the following code: public class Dog : Mammal { public sealed override void Go() { } } public class Mammal { public virtual void Go() { } } In this code, the method 'Go' in Dog is sealed.  It cannot be overridden in a subclass.  Writing this would cause a compile error: public class Dachshund : Dog { public override void Go() { } } However, we can 'new' a method with the same name.  This is essentially a new method; distinct from the 'Go' in the subclass: public class Terrier : Dog { public new void Go() { } } Sealing properties? You can also seal seal properties.  You add 'sealed' to the property definition, like so: public sealed override string Name {     get { return m_Name; }     set { m_Name = value; } } In C#, you can only seal a property, not the underlying setters/getters.  This is because C# offers no override syntax for setters or getters.  However, in underlying IL you seal the setter and getter methods individually - a property is just metadata. Why bother sealing? There are a few traditional reasons to seal: Invariance. Other people may want to derive from your class, even though your implementation may make successful derivation near-impossible.  There may be twisted, hacky logic that could never be second-guessed by another developer.  By sealing your class, you're protecting them from wasting their time.  The CLR team has sealed most of the framework classes, and I assume they did this for this reason. Security.  By deriving from your type, an attacker may gain access to functionality that enables him to hack your system.  I consider this a very weak security precaution. Speed.  If a class is sealed, then .NET doesn't need to consult the virtual-function-call table to find the actual type, since it knows that no derived type can exist.  Therefore, it could emit a 'call' instead of 'callvirt' or at least optimise the machine code, thus producing a performance benefit.  But I've done trials, and have been unable to demonstrate this If you have an example, please share! All in all, I'm not convinced that sealing is interesting or important.  Anyway, moving-on... What is automatically sealed? Value types and structs.  If they were not always sealed, all sorts of things would go wrong.  For instance, structs are laid-out inline within a class.  But what if you assigned a substruct to a struct field of that class?  There may be too many fields to fit. Static classes.  Static classes exist in C# but not .NET.  The C# compiler compiles a static class into an 'abstract sealed' class.  So static classes are already sealed in C#. Enumerations.  The CLR does not track the types of enumerations - it treats them as simple value types.  Hence, polymorphism would not work. What cannot be sealed? Interfaces.  Interfaces exist to be implemented, so sealing to prevent implementation is dumb.  But what if you could prevent interfaces from being extended (i.e. ban declarations like "public interface IMyInterface : ISealedInterface")?  There is no good reason to seal an interface like this.  Sealing finalizes behaviour, but interfaces have no intrinsic behaviour to finalize Abstract classes.  In IL you can create an abstract sealed class.  But C# syntax for this already exists - declaring a class as a 'static', so it forces you to declare it as such. Non-override methods.  If a method isn't declared as override it cannot be overridden, so sealing would make no difference.  Note this is stated from a C# perspective - the words are opposite in IL.  In IL, you have four choices in total: no declaration (which actually seals the method), 'virtual' (called 'override' in C#), 'sealed virtual' ('sealed override' in C#) and 'newslot virtual' ('new virtual' or 'virtual' in C#, depending on whether the method already exists in a base class). Methods that implement interface methods.  Methods that implement an interface method must be virtual, so cannot be sealed. Fields.  A field cannot be overridden, only hidden (using the 'new' keyword in C#), so sealing would make no sense.

    Read the article

< Previous Page | 940 941 942 943 944 945 946 947 948 949 950 951  | Next Page >