Search Results

Search found 30252 results on 1211 pages for 'network programming'.

Page 951/1211 | < Previous Page | 947 948 949 950 951 952 953 954 955 956 957 958  | Next Page >

  • 12.10 Wireless hotspot configuration and internet browsing - question

    - by Indian
    In our campus we have a leased line connection from a service provider, which has an external IP W.X.Y.Z. This connection is distributed from the server several sub-networks / subnets as follows: Faculty: 172.33....../ 255.255.0.0 Administration: 172.34......./255.255.255.0 Students: 172.35...../255.255.216.0 A student has a laptop with a fixed IP address 172.35.23.123 / 255.255.216.0 where the IP address is on the ethernet port. The gateways for internet access are 172.31.1.1 and 172.31.1.2. Further the student has a wireless port which is inaccessible in the hostel area. The OS of the student is Ubuntu 12.10. The student in the possession of an android phone on which he wishes to install specific software and therefore wishes to activate the internet therein. The student has already attempted the Wireless hotspot solution which works for 12.04 but has not been successful. Various instructions on the internet have helped the student to do the following Installation of dhcp server and hostapd: sudo apt-get install isc-dhcp-server sudo apt-get install hostapd File: /etc/network/interfaces auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 10.10.0.1 netmask 255.255.255.0 dns-nameservers 172.31.1.1 172.31.1.2 File: /etc/dhcp/dhcpd.conf subnet 10.10.0.0 netmask 255.255.255.0 { range 10.10.0.2 10.10.0.4; option routers 10.10.0.1; option domain-name-servers 172.31.1.1 172.31.1.2; default-lease-time 6000; max-lease-time 72000; } File: /etc/hostapd/hostapd.conf interface=wlan0 driver=nl80211 ssid=my_hotspot channel=1 hw_mode=g auth_algs=1 wpa=3 wpa_passphrase=1234567890 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP CCMP rsn_pairwise=CCMP File: /etc/default/hostapd RUN_DAEMON=”yes” DAEMON_CONF=”/etc/hostapd/hostapd.conf” DAEMON_OPTS=”-dd” File: /etc/default/isc-dhcp-server INTERFACES=”wlan0” File: /etc/rc.local iptables -t nat -A POSTROUTING -s 10.10.0.0/16 -o eth0 -j MASQUERADE exit 0 After all the configuration, the computer is restarted. The student can see that the hotspot named “my_hotspot” is available. The hotspot also awards an address to the android phone. The student will now be able to browse the internet.

    Read the article

  • Error while trying to configure VLAN with Open vSwitch

    - by Abhishek Chanda
    I am trying to connect a number of VMs using Open vSwitch. The VMs are on two separate physical boxes. Here is what I did: Created two tap devices on one physical host sudo ip tuntap add mode tap tap0 and same for tap1 Bring them up sudo ip link set tap0 up Add them as ports to Open vSwitch (br0 was created as a OVS bridge previously) sudo ovs-vsctl add-port br0 tap0 tag=1 Now I booted the VMs (using VirtualBox) and assigned addresses 192.168.122.11 and 192.168.122.12. Now when I try to ping one VM from another, I get the error Connect: network is unreachable. Since both VMs are connected to the switch on the same VLAN, I expect to be able to ping one from another. What is going wrong here?

    Read the article

  • Nagios: Which services should I monitor on different roles of servers?

    - by Itai Ganot
    I've started working in a new workplace and my first task is to build a Nagios server and configure it to monitor the servers in the network. Since I'm starting from scratch I wanted to hear from you, experienced users, which checks should I configure for each role? For example, there are some basic checks which I run on each Linux machine I monitor: SSH, Ping, Load, Current Users, Swap Usage, etc... Now my question is, which specific checks should I run for a DataBase server, for a Networking Switch, for Httpd servers? (I currently monitor how many httpd processes are running) Thanks in advance

    Read the article

  • How to reuse backup on Time Machine on Snow Leopard after a logic board change, after choosing wrong

    - by kmiffy
    After my logic board was replaced, I connected my laptop back to my network, and Time Machine gave me a popup, as shown on this thread: http://superuser.com/questions/78068/recycle-time-machine-for-new-machine/78264#78264 I misread the question and clicked on "Create New Backup" when I should have clicked on "Reuse Backup" to connect to my old backup file. How can I trigger that popup again? Turning Time Machine on and off does not work, and the instructions on forums to fix via terminal doesn't work because snow leopard is missing the fsaclctl command (and I'm also not familiar with terminal commands.) Thanks.

    Read the article

  • Sharing VPN from XP to Linux virtual

    - by user55513
    Hi I will keep the question simple with few details, if more is needed tell me. Thanks. I am playing around with networking and virtualbox. So I have 2 virtual machines. One is windows xp and another has linux in it. Windows XP has 2 network cards. One for the internet and the other to connect to the linux computer. Linux has one 1 card and it can only access the internet passing through Windows XP. Internet works fine until I activate OpenVPN on Windows. When I turn on VPN, Linux has no access to it. How can I make linux use VPN too? I believe it has something to do with using the "route" command on XP to send VPN traffic to Linux but I was not able to figure it out how yet.

    Read the article

  • Where should I go to learn about networking? [closed]

    - by Ollie Saunders
    I wonder if anyone could recommend resource or resources such as a good book that: explains how all the important protocols work and interact. I’m interested in those that are relevant in a typical home network and used over the Internet explains in detail how ADSL Internet connections work to the level of depth necessary so that I’m able to tweak and measure performance settings starts from the beginning but attempts to provide proper understanding rather than idiot-oriented steps to follow Basically, I’m interested in how these technologies work and tend to be implemented in hardware and software rather than “here’s what to do if…” I’m interested in Computer Networking by Andrew S. Tanenbaum and I wonder if anyone else has any experience with that title. It’s expensive but I could probably loan a copy for £3 from the library or so.

    Read the article

  • Lagging digital tv over ethernet

    - by Steve
    I have a HD Home Run TV over ethernet device, which connects the aerial to my router, and from there the router connects to my PC over about 15m of 100Mbps ethernet cable. The TV output lags every second. It does not do so for a computer much closer to the router. It is odd to me that the network rate is around 7Mbps on a 100Mbps cable. I am not downloading or streaming anything else on the affected computer. Is this lag caused by the speed of the cable, the length of the cable, or interference on the cable? I am considering swapping the ethernet cable with shielded ethernet cable.

    Read the article

  • Cisco 1841 Box and Watchguard XTM21-W

    - by Corey
    I have never set one of these up before and need a little assistance. Right now we have a T1 line coming in from Sprint to a Cisco 1841 and then on to our router. However, when I plug the Cisco 1841 into Port 0 and the router into Port 3 it does not work. In Port 1 I have my management computer plugged in. We have one subnet and this must be easy but I cannot figure out how to make this work. When the firewall is plugged in then I get no internet or network access.

    Read the article

  • ubuntu qcow2 image for local usage

    - by aisbaa
    I'm using kvm and I would like to run ubuntu server on it. My goal is to run db2 database instance for development. Is there ready to use ubuntu qcow2 images online for such purpose? Or should I install it from live cd? I've found this instruction UEC/Images, but at launch I get: $ kvm -fda ${floppy} -drive if=virtio,file=./disk.img -boot a ... Nothing to boot: No such file or directory (http://ipxe.org/...) No more network devices No bootable device. Solution: I havent found pre-installed ubuntu virtual machine image online, so solution is to install it by your self.

    Read the article

  • sftp chroot access via SSH

    - by Cudos
    Hello. I have this setup in sshd_config: AllowUsers test1 test2 Match group sftpgroup ChrootDirectory /var/www X11Forwarding no AllowTcpForwarding no ForceCommand internal-sftp Match user test2 ChrootDirectory /var/www/somedomain.dk X11Forwarding no AllowTcpForwarding no ForceCommand internal-sftp I am trying to restrict test2 to only use /var/www/somedomain.dk For some reason when I try to login e.g. with Filezilla on account test2 I get this error: "Server unexpectedly closed network connection" The users are created and works. the SSH service has been stopped and started. test1 works when using e.g. filezilla and the root of the connection is /var/www. What am I doing wrong?

    Read the article

  • running adb via wifi on ubuntu 13.04

    - by Blaze Tama
    First, im new on linux so please bear with me. I have a rooted android phone and i was able to run the adb via wifi network on windows, where i just need to go to the adb's directory and type adb connect. However, i can't just do that in my ubuntu. Everytime i enter adb connect, the terminal always said that i dont have the adb and i must install it. When i check the ADT Bundle (I downloaded the bundled one from here), i can see the adb is there inside the platform-tools folder. I already tried to change the directory to the platform-tools and run the adb connect from there, but its still not working. Do i need to install the adb again via terminal? Or did i miss something? You may be wondering why dont i just download the adb (again) via terminal and do trial and error? The answer is because i dont have a good internet connection, so i want to avoid unnecessary downloads. Thanks for your time :D

    Read the article

  • Eventlog entry for allowed connection in Windows Firewall

    - by Jaap
    I was seeing a lot of entries in the eventlog: The Windows Filtering Platform has permitted a connection. Application Information: Process ID: 4 Application Name: System Network Information: Direction: Inbound Source Address: 10.xxx.xxx.xxx Source Port: 80 Destination Address: 10.xxx.xxx.xxx Destination Port: 31773 Protocol: 6 Filter Information: Filter Run-Time ID: 67903 Layer Name: Receive/Accept Layer Run-Time ID: 44 We have a loadbalancer which checks every second to see if the application is still running (a health check). The logs contain large amounts of this kind of entries, which makes the Event Viewer slow and it's difficult to find the more interesting logs. How do I make sure these messages don't end up in the event logs?

    Read the article

  • Unable to open up port 80 on EC2 using elasticfox

    - by uswaretech
    I have launched an instance of EC2. Initially the security group I created did not have the port 80 open. I sshed and installed Apache etc, and now want to open port 80. I am using elasticfox. So I go to Security Group - [My Group name] - Grant new permission Open up the port 80(Http with TCP) for network range 0.0.0.0/0 Now my assumption is that these ports should be opened up on the instance, but the instance is not responding on the allocated IPs, public DNS entry. What should I do next?

    Read the article

  • IIS permissions issue pointing docroot to Samba share

    - by lalalalalalalambda
    I have an IIS project which is stored on a Samba shared, network mounted with the following line: X: \\my-samba-server\dev /user:freddie Connectivity is fine, can read/write files from X:. In IIS, I'm trying to set it as the Physical path via \\my-samba-server\dev\folder\to\my\files, which results in the following 500.19 error: Config Error | Cannot read configuration file due to insufficient permissions It is by default trying to use the Pass-through authentication. If I try to set this to connect as the specific user freddie, I receive: The specified user does not exist What is the correct way to connect to a path which has been setup as described above? *Samba man pages indicate version 3.6 is on the Debian host

    Read the article

  • Trendnet tew-424ub wireless not working after update 12.10

    - by dwa
    I updated packages from the software manager and now my wireless won't work. It's a Trendnet tew-424ub iwconfig says lo no wireless extensions. eth0 no wireless extensions. sudo lshw -C network: description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 02 serial: 1c:6f:65:46:e9:d4 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.137 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:de00(size=256) memory:fdaff000-fdafffff memory:fdae0000-fdaeffff memory:fda00000-fda0ffff lsusb: Bus 003 Device 002: ID 0bc2:3332 Seagate RSS LLC Expansion Bus 003 Device 003: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet] Bus 003 Device 006: ID 0457:0163 Silicon Integrated Systems Corp. 802.11 Wireless LAN Adapter Bus 005 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 005: ID 0781:5530 SanDisk Corp. Cruzer Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Help? I'm not sure where to start. I've been browsing forums and such for a long time and nothing I try is working.

    Read the article

  • Unable to connect guest using VMWare Player

    - by eLAN
    I'm running RedHat server 5.3 as guest on Window XP VMware palyer. the network setting is set to "Host Only", but I have tries all other settings. I'm able to ping the guest machine, but I'm unable to connect it in any other way including webserver, Tomcat, Telnet, ssh. all of the services above are working from within the guest (using localhost). Guest firewall and SELinux are disabled. any idea on what I should check next? every idea will be appreciated... thnaks Ilan

    Read the article

  • Cross-Forest Trust

    - by cdalley
    I am looking at testing a cross-domain trust we can have two domain controllers (with different forests and domain names) setup so we can move everyone onto the new domain. We do NOT run exchange on site and we do not have any links to O365 to AD currently. Onto the problem: I have setup two DCs in a Virtual Machine: They are on the same network 192.168.0.* The Windows 2003 server: Name: OLDSRVR "Clone" of our current Domain Controller IP: 192.168.0.1 Domain: internal.test.com The Windows 2012 server: Name: ADCTEST01 Brand new domain setup from scratch separate to internal.test.com Domain: internal.test2.com IP: 192.168.0.2 OLDSRVR can only see ADCTEST if it has dynamic IP set. If I set a static IP it cannot see it. If I try using the dynamic IP and try to join it gets to the end then complains "??The trust relationship between this workstation and the primary domain failed" Any ideas?

    Read the article

  • Security of a free public VPN service

    - by Mark Belli
    I just started using VPNBOOK, which is a (very efficent) free VPN solution. I have a question: VPNBOOK user and pass used to connect to their vpn network are publicily available on their homepage; everybody uses them to connect to the vpn. Can a user intercept my wifi traffic and: Understand that my connections are directed to VPNBOOK servers. If point 1 is successful, then they could use VPNBOOK public user and pass to decrypt my traffic? I hope I am missing something, otherwise it would be a very big weakness and I would revert to a paid service (with a private account)

    Read the article

  • My co-worker has not been doing such a good job for the past decade. What do I do? [closed]

    - by stijn
    Possible Duplicate: How do I approach a coworker about his or her code quality? I started working with him almost a decade ago and back then I had never really programmed before, being a young hardware engineer. Right now however I have made quite some progress in all areas being part of software design and i am much, much more skilled than my co-worker who is 15 years older and has been programming more than twice as long. He is super nice and definitely smart enough, but lately his lack of skill and performance are starting to drag me down because we're more and more working on the same codebase. And soon we are going to do a quite ambitious start from scratch creating a whole new hard/software system. I feel it is time to address all issues now, but i do not know how to start. Here are some of the things that I would like to see him improve on: no consistent usage of style, spaces nor tabs (eg if(something ) a =b ) adds newlines around pieces of code to make it easier to read, then commits those with messages like 'no changes made' overall commit messages are useless and so are most of the comments, if there are any (eg 'remove solves for bug Rik' if Rik reported a bug). There is no function/class documentation. lots of spelling errors, in both English and native language, which sometimes are mixed 6/7/8 level deep deep nesting is no exception, a lot of functions start with one level already like if(ptr!=Null){ even when ptr is the result of allocation via new in the constructor numerous source files have over 10k lines of those lines, a major part is simply a result of copy-pasting functionality instead of using a function. This includes copying comments so we end up with 50 occurrences of var=NULL; //TODO TEST this!!!!!!! another part is hundreds of lines of dead code knows what versioning does, yet comments out old code and places new code underneath it when making changes coding skills are below par, especially for the type of rather high precision applications we do. Yet somehow, after a lot of trying and testing, stuff starts to work. But then breaks again some time later because every change casues a waterfall effect. violates every single item in the C++ FAQ lite, practices every bad practice I can think of still doesn't know how to properly use the debugger, but spends hours inspecting messy logfiles in notepad on a tiny laptop screen. Does not make any adjustments to the settings of the software he uses. Never uses keyboard shortcuts. does not seem to progress or learn new things at all. Work rather slow, mostly due to the lack of planning and incorrect usage of tools. How does one deal with this? For starters, how do I make him aware of all these problems? Should I tell the staff about it? And the next step, how to get him to learn new things and adopt another way of working?

    Read the article

  • Can working exclusively with niche apps or tech hurt your career in software development? How to get out of the cycle? [closed]

    - by Keoma
    I'm finding myself in a bit of a pickle. I've been at a pretty comfortable IT group for almost a decade. I got my start here working on web development, mostly CRUD, but have demonstrated the ability to figure out more complex problems. I'm not a rock star, but I have received many compliments on my programming aptitude, and technologists and architects have commented on my ability to pick things up (for example, I recently learned a very popular web framework that shall remain nameless since I don’t want to be identified). My problem is that, over time, my responsibilities have been shifting towards work such as support or ‘development’ with some rather niche products (afraid to mention here due to potential for being identified). Some of this work, if it includes anything resembling coding, is very menial scripting in languages such as Powershell or VBScript. The vast majority of the time, however, a typical day consists of going back and forth with the product’s vendor support to send them logs and apply configuration changes or patches they recommend. I’m basically starved for some actual software development. However, even though I’m more than capable of doing that development work (and actually do a much better job at it than anything else), our boss is more interested in the kind of work I mentioned above, her reasoning being that since no one else in the organization wants to do it, it must mean job security. This has been going on for close to 3 years, and the only reason I have held on is on the promise that we would eventually get more development projects assigned to us. Well, that turned out not to be true at all. A recent talk with the boss has just made it more explicitly clear, as she told me in no uncertain terms that it’s very likely that development work (web or otherwise) would go to another group. The reason given to me is that our we don’t have enough resources in our group to handle that. So now I find myself in the position that I either have to stay in what has essentially become a dead end IT job that is tied to the fortunes of a niche stack of apps, or try to find a position that will be better for my long term career. My problem (is it a problem?), however, is that compared to others, my development projects in the last three years are very sparse in number. To compound things, projects using the latest and most popular frameworks, amount to the big fat number of just one—with no work of that kind in the foreseeable future. I am very concerned that this sparseness in my resume is a deficit, and that it will hurt my chances of landing a different job. I’m also wondering how much it will hurt me, and whether that can be ameliorated with hobby projects of my own. I guess I’m looking for opinions. Thank you very much for reading.

    Read the article

  • What happens when you add a Graphics card to a i7 with build in graphics (e.g. HD 4000)

    - by Matt
    I'm thinking of upgrading my computer from an AMD Phenom II X4 955BE with a AMD Radeon HD 6800 Graphics card (not integrated) to using a Intel Core i7 3770. As I have no knowledge of integrated graphics, my question is, what happens to the computing power when not using the HD4000 integrated graphics of the CPU (does it mean the CPU will run faster then it would if I relied on it?) Also what is better the CPUs inbuilt HD4000 or my Radeon Graphics card? I am mostly interested in terms of content creation: Using Adobe After Effects, 3D Rendering etc. Not too bothered about gaming performance. I will be using the spare parts of this build and older systems to make a second computer for network renders so what will be the advantages of keeping the Radeon with the current system for that?

    Read the article

  • Port Forwarding on Actiontec GT704-WG Router Issues

    - by adamweeks
    I am trying to setup a server at customer's location that has the Actiontec GT704-WG DSL router. The port forwarding it not working at all. Here's the details: Server: OpenSuse Linux box with a static IP address of 192.168.1.200 Application running accepting connections on port 8060 Firewall disabled Local connections (within the network) working properly Router: Updated to latest firmware available DHCP range set to 192.168.1.69-192.168.1.199 to not have any conflicts with the server Firewall set to "off" Rule set in the "Applications" setting to forward 8060 TCP and UDP to 192.168.1.200 machine (I've tried using the "TCP,UDP" option as well as both individual options) I've also tried just simply putting the server in the DMZ to see if I could connect to anything, but still nothing. Looking for any clues before I call and waste hours explaining the issue to tech support.

    Read the article

  • Methodology to understanding JQuery plugin & API's developed by third parties

    - by Taoist
    I have a question about third party created JQuery plug ins and API's and the methodology for understanding them. Recently I downloaded the JQuery Masonry/Infinite scroll plug in and I couldn't figure out how to configure it based on the instructions. So I downloaded a fully developed demo, then manually deleted everything that wouldn't break the functionality. The code that was left allowed me to understand the plug in much greater detail than the documentation. I'm now having a similar issue with a plug in called JQuery knob. http://anthonyterrien.com/knob/ If you look at the JQuery Knob readme file it says this is working code: $(function() { $('.dial') .trigger( 'configure', { "min":10, "max":40, "fgColor":"#FF0000", "skin":"tron", "cursor":true } ); }); But as far as I can tell it isn't at all. The read me also says the Plug in uses Canvas. I am wondering if I am suppose to wrap this code in a canvas context or if this functionality is already part of the plug in. I know this kind of "question" might not fit in here but I'm a bit confused on the assumptions around reading these kinds of documentation and thought I would post the query regardless. Curious to see if this is due to my "newbi" programming experience or if this is something seasoned coders also fight with. Thank you. Edit In response to Tyanna's reply. I modified the code and it still doesn't work. I posted it below. I made sure that I checked the Google Console to insure the basics were taken care of, such as not getting a read-error on the library. <!DOCTYPE html> <meta charset="UTF-8"> <title>knob</title> <link rel="stylesheet" href="http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/themes/hot-sneaks/jquery-ui.css" type="text/css" /> <script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.js" charset="utf-8"></script> <script src="https://ajax.googleapis.com/ajax/libs/jqueryui/1.8.21/jquery-ui.min.js"></script> <script src="js/jquery.knob.js"></script> <div id="button1">test </div> <script> $(function() { $("#button1").click(function () { $('.dial').trigger( 'configure', { "min":10, "max":40, "fgColor":"#FF0000", "skin":"tron", "cursor":true } ); }); }); </script>

    Read the article

  • Password Expired Server 2008 R2

    - by Shaharyar
    Hello everybody, We're facing some trouble with our Server 2008 R2 installation. The passwords expired and we're prompted to change the password. After changing it, we get following error message: Configuration Information could no be read from the domain controller, either because the machine is unavailable, or access has been denied. But we aren't even using a domain controller. So we tried running the server in Safe Mode where we get following message after changing the password: An attempt was made to logon, but the network logon service was not started. Are there any other things I could try? All help is more than appreciated!

    Read the article

  • Connect to NFS on availability

    - by berkes
    What would be a good way to automatically mount an NFS when it gets/is available? I have the following: Media server at home, running Ubuntu, 10.10 with GUI *) Laptop often at home, often on the road or at clients. Ubuntu 10.10 with GUI. What I'd like is my laptop connecting to the nfs (or any other mountable networked filesystem) so that Banshee sees all the music, new podcast-entries (and video) from that media-server. I already have firefly (mt-daapd) running, which works, but is flakey on both server-side and client-side. But its biggest downside, is that I cannot easily fix metadata on files on the media-server this way. DAAP is read-only by design. I can mount nfs manually, through a sudo mount /media/nfsmultimedia/. I am not looking for a manual, or howto on setting up a NFS client and server. Merely a way to have this more transparently working. Obviously I'd like the NFS to be unmounted if the network is no longer available (i.e. when I open my laptop-lid on my clients buro). It may be, that an NFS is not suited for this, in that case, I'd love to hear other options. :) *) Actually: I also have a fileserver, backupserver and webserver to which I'd like to connect in a somewhat similar way. Right now I connect to these over SSH, using gvfs.

    Read the article

< Previous Page | 947 948 949 950 951 952 953 954 955 956 957 958  | Next Page >