Search Results

Search found 41497 results on 1660 pages for 'fault'.

Page 96/1660 | < Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >

• LSI 9285-8e and Supermicro SC837E26-RJBOD1 duplicate enclosure ID and slot numbers

  - by Andy Shinn

  I am working with 2 x Supermicro SC837E26-RJBOD1 chassis connected to a single LSI 9285-8e card in a Supermicro 1U host. There are 28 drives in each chassis for a total of 56 drives in 28 RAID1 mirrors. The problem I am running in to is that there are duplicate slots for the 2 chassis (the slots list twice and only go from 0 to 27). All the drives also show the same enclosure ID (ID 36). However, MegaCLI -encinfo lists the 2 enclosures correctly (ID 36 and ID 65). My question is, why would this happen? Is there an option I am missing to use 2 enclosures effectively? This is blocking me rebuilding a drive that failed in slot 11 since I can only specify enclosure and slot as parameters to replace a drive. When I do this, it picks the wrong slot 11 (device ID 46 instead of device ID 19). Adapter #1 is the LSI 9285-8e, adapter #0 (which I removed due to space limitations) is the onboard LSI. Adapter information: Adapter #1 ============================================================================== Versions ================ Product Name : LSI MegaRAID SAS 9285-8e Serial No : SV12704804 FW Package Build: 23.1.1-0004 Mfg. Data ================ Mfg. Date : 06/30/11 Rework Date : 00/00/00 Revision No : 00A Battery FRU : N/A Image Versions in Flash: ================ BIOS Version : 5.25.00_4.11.05.00_0x05040000 WebBIOS Version : 6.1-20-e_20-Rel Preboot CLI Version: 05.01-04:#%00001 FW Version : 3.140.15-1320 NVDATA Version : 2.1106.03-0051 Boot Block Version : 2.04.00.00-0001 BOOT Version : 06.253.57.219 Pending Images in Flash ================ None PCI Info ================ Vendor Id : 1000 Device Id : 005b SubVendorId : 1000 SubDeviceId : 9285 Host Interface : PCIE ChipRevision : B0 Number of Frontend Port: 0 Device Interface : PCIE Number of Backend Port: 8 Port : Address 0 5003048000ee8e7f 1 5003048000ee8a7f 2 0000000000000000 3 0000000000000000 4 0000000000000000 5 0000000000000000 6 0000000000000000 7 0000000000000000 HW Configuration ================ SAS Address : 500605b0038f9210 BBU : Present Alarm : Present NVRAM : Present Serial Debugger : Present Memory : Present Flash : Present Memory Size : 1024MB TPM : Absent On board Expander: Absent Upgrade Key : Absent Temperature sensor for ROC : Present Temperature sensor for controller : Absent ROC temperature : 70 degree Celcius Settings ================ Current Time : 18:24:36 3/13, 2012 Predictive Fail Poll Interval : 300sec Interrupt Throttle Active Count : 16 Interrupt Throttle Completion : 50us Rebuild Rate : 30% PR Rate : 30% BGI Rate : 30% Check Consistency Rate : 30% Reconstruction Rate : 30% Cache Flush Interval : 4s Max Drives to Spinup at One Time : 2 Delay Among Spinup Groups : 12s Physical Drive Coercion Mode : Disabled Cluster Mode : Disabled Alarm : Enabled Auto Rebuild : Enabled Battery Warning : Enabled Ecc Bucket Size : 15 Ecc Bucket Leak Rate : 1440 Minutes Restore HotSpare on Insertion : Disabled Expose Enclosure Devices : Enabled Maintain PD Fail History : Enabled Host Request Reordering : Enabled Auto Detect BackPlane Enabled : SGPIO/i2c SEP Load Balance Mode : Auto Use FDE Only : No Security Key Assigned : No Security Key Failed : No Security Key Not Backedup : No Default LD PowerSave Policy : Controller Defined Maximum number of direct attached drives to spin up in 1 min : 10 Any Offline VD Cache Preserved : No Allow Boot with Preserved Cache : No Disable Online Controller Reset : No PFK in NVRAM : No Use disk activity for locate : No Capabilities ================ RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span Supported Drives : SAS, SATA Allowed Mixing: Mix in Enclosure Allowed Mix of SAS/SATA of HDD type in VD Allowed Status ================ ECC Bucket Count : 0 Limitations ================ Max Arms Per VD : 32 Max Spans Per VD : 8 Max Arrays : 128 Max Number of VDs : 64 Max Parallel Commands : 1008 Max SGE Count : 60 Max Data Transfer Size : 8192 sectors Max Strips PerIO : 42 Max LD per array : 16 Min Strip Size : 8 KB Max Strip Size : 1.0 MB Max Configurable CacheCade Size: 0 GB Current Size of CacheCade : 0 GB Current Size of FW Cache : 887 MB Device Present ================ Virtual Drives : 28 Degraded : 0 Offline : 0 Physical Devices : 59 Disks : 56 Critical Disks : 0 Failed Disks : 0 Supported Adapter Operations ================ Rebuild Rate : Yes CC Rate : Yes BGI Rate : Yes Reconstruct Rate : Yes Patrol Read Rate : Yes Alarm Control : Yes Cluster Support : No BBU : No Spanning : Yes Dedicated Hot Spare : Yes Revertible Hot Spares : Yes Foreign Config Import : Yes Self Diagnostic : Yes Allow Mixed Redundancy on Array : No Global Hot Spares : Yes Deny SCSI Passthrough : No Deny SMP Passthrough : No Deny STP Passthrough : No Support Security : No Snapshot Enabled : No Support the OCE without adding drives : Yes Support PFK : Yes Support PI : No Support Boot Time PFK Change : Yes Disable Online PFK Change : No PFK TrailTime Remaining : 0 days 0 hours Support Shield State : Yes Block SSD Write Disk Cache Change: Yes Supported VD Operations ================ Read Policy : Yes Write Policy : Yes IO Policy : Yes Access Policy : Yes Disk Cache Policy : Yes Reconstruction : Yes Deny Locate : No Deny CC : No Allow Ctrl Encryption: No Enable LDBBM : No Support Breakmirror : No Power Savings : Yes Supported PD Operations ================ Force Online : Yes Force Offline : Yes Force Rebuild : Yes Deny Force Failed : No Deny Force Good/Bad : No Deny Missing Replace : No Deny Clear : No Deny Locate : No Support Temperature : Yes Disable Copyback : No Enable JBOD : No Enable Copyback on SMART : No Enable Copyback to SSD on SMART Error : Yes Enable SSD Patrol Read : No PR Correct Unconfigured Areas : Yes Enable Spin Down of UnConfigured Drives : Yes Disable Spin Down of hot spares : No Spin Down time : 30 T10 Power State : Yes Error Counters ================ Memory Correctable Errors : 0 Memory Uncorrectable Errors : 0 Cluster Information ================ Cluster Permitted : No Cluster Active : No Default Settings ================ Phy Polarity : 0 Phy PolaritySplit : 0 Background Rate : 30 Strip Size : 64kB Flush Time : 4 seconds Write Policy : WB Read Policy : Adaptive Cache When BBU Bad : Disabled Cached IO : No SMART Mode : Mode 6 Alarm Disable : Yes Coercion Mode : None ZCR Config : Unknown Dirty LED Shows Drive Activity : No BIOS Continue on Error : No Spin Down Mode : None Allowed Device Type : SAS/SATA Mix Allow Mix in Enclosure : Yes Allow HDD SAS/SATA Mix in VD : Yes Allow SSD SAS/SATA Mix in VD : No Allow HDD/SSD Mix in VD : No Allow SATA in Cluster : No Max Chained Enclosures : 16 Disable Ctrl-R : Yes Enable Web BIOS : Yes Direct PD Mapping : No BIOS Enumerate VDs : Yes Restore Hot Spare on Insertion : No Expose Enclosure Devices : Yes Maintain PD Fail History : Yes Disable Puncturing : No Zero Based Enclosure Enumeration : No PreBoot CLI Enabled : Yes LED Show Drive Activity : Yes Cluster Disable : Yes SAS Disable : No Auto Detect BackPlane Enable : SGPIO/i2c SEP Use FDE Only : No Enable Led Header : No Delay during POST : 0 EnableCrashDump : No Disable Online Controller Reset : No EnableLDBBM : No Un-Certified Hard Disk Drives : Allow Treat Single span R1E as R10 : No Max LD per array : 16 Power Saving option : Don't Auto spin down Configured Drives Max power savings option is not allowed for LDs. Only T10 power conditions are to be used. Default spin down time in minutes: 30 Enable JBOD : No TTY Log In Flash : No Auto Enhanced Import : No BreakMirror RAID Support : No Disable Join Mirror : No Enable Shield State : Yes Time taken to detect CME : 60s Exit Code: 0x00 Enclosure information: # /opt/MegaRAID/MegaCli/MegaCli64 -encinfo -a1 Number of enclosures on adapter 1 -- 3 Enclosure 0: Device ID : 36 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port B Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 65 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11820 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 48 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 1: Device ID : 65 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port A Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 36 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11760 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 47 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 2: Device ID : 252 Number of Slots : 8 Number of Power Supplies : 0 Number of Fans : 0 Number of Temperature Sensors : 0 Number of Alarms : 0 Number of SIM Modules : 1 Number of Physical Drives : 0 Status : Normal Position : 1 Connector Name : Unavailable Enclosure type : SGPIO Failed in first Inquiry commnad FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : Unavailable Inquiry data : Vendor Identification : LSI Product Identification : SGPIO Product Revision Level : N/A Vendor Specific : Exit Code: 0x00 Now, notice that each slot 11 device shows an enclosure ID of 36, I think this is where the discrepancy happens. One should be 36. But the other should be on enclosure 65. Drives in slot 11: Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 5, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 48 WWN: Sequence Number: 11 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : YES Device Firmware Level: A5C0 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8a53 Connected Port Number: 1(path0) Inquiry Data: MJ1311YNG6YYXAHitachi HDS5C3030ALA630 MEAOA5C0 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 19, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 19 WWN: Sequence Number: 4 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : NO Device Firmware Level: A580 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8e53 Connected Port Number: 0(path0) Inquiry Data: MJ1313YNG1VA5CHitachi HDS5C3030ALA630 MEAOA580 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Update 06/28/12: I finally have some new information about (what we think) the root cause of this problem so I thought I would share. After getting in contact with a very knowledgeable Supermicro tech, they provided us with a tool called Xflash (doesn't appear to be readily available on their FTP). When we gathered some information using this utility, my colleague found something very strange: root@mogile2 test]# ./xflash.dat -i get avail Initializing Interface. Expander: SAS2X36 (SAS2x36) 1) SAS2X36 (SAS2x36) (50030480:00EE917F) (0.0.0.0) 2) SAS2X36 (SAS2x36) (50030480:00E9D67F) (0.0.0.0) 3) SAS2X36 (SAS2x36) (50030480:0112D97F) (0.0.0.0) This lists the connected enclosures. You see the 3 connected (we have since added a 3rd and a 4th which is not yet showing up) with their respective SAS address / WWN (50030480:00EE917F). Now we can use this address to get information on the individual enclosures: [root@mogile2 test]# ./xflash.dat -i 5003048000EE917F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00EE917F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 5003048000E9D67F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00E9D67F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 500304800112D97F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:0112D97F Enclosure Logical Id: 50030480:0112D97F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 Did you catch it? The first 2 enclosures logical ID is partially masked out where the 3rd one (which has a correct unique enclosure ID) is not. We pointed this out to Supermicro and were able to confirm that this address is supposed to be set during manufacturing and there was a problem with a certain batch of these enclosures where the logical ID was not set. We believe that the RAID controller is determining the ID based on the logical ID and since our first 2 enclosures have the same logical ID, they get the same enclosure ID. We also confirmed that 0000007F is the default which comes from LSI as an ID. The next pointer that helps confirm this could be a manufacturing problem with a run of JBODs is the fact that all 6 of the enclosures that have this problem begin with 00E. I believe that between 00E8 and 00EE Supermicro forgot to program the logical IDs correctly and neglected to recall or fix the problem post production. Fortunately for us, there is a tool to manage the WWN and logical ID of the devices from Supermicro: ftp://ftp.supermicro.com/utility/ExpanderXtools_Lite/. Our next step is to schedule a shutdown of these JBODs (after data migration) and reprogram the logical ID and see if it solves the problem. Update 06/28/12 #2: I just discovered this FAQ at Supermicro while Google searching for "lsi 0000007f": http://www.supermicro.com/support/faqs/faq.cfm?faq=11805. I still don't understand why, in the last several times we contacted Supermicro, they would have never directed us to this article :\

  Read the article

• Disk I/O error copying a Exchange 2007 database

  - by Scottio

  Hi all, A short time ago due to disk space I moved our Exchange database onto an external drive, the drive was new and the database was being backed up daily. I've now discovered the database is corrupt, I've run the Exchange utils to fix the database and this works but it corrupts again as soon as I try to move it. I need to get it off the disk, any suggestions? I'm also trying to restore the last good database but I'd like try to get the database off this disk, any suggestions? PS I know putting the db on an external disk was a bad move, I had no where else to put it :-( Thanks

  Read the article

• Ghost application error

  - by yaar zeigerman

  Back story for better understanding: I have a ghost made by someone else and toady some one I worked with made a new ghost in the same folder with the regular ghost I work with. I am trying to run the ghost now but get a 1808: Ghost Decompression Error and after aborting I get this message "Application Error 19225: Ghost has detected corruption in the image file. Please perform an integrity check on the image. If this problem persists, contact Symantec Technical Support at http://service.symantec.com" I would like to now if him making a new ghost could have ruined the old ghost and if not where did my problem come from and how do I fix it ?

  Read the article

• Cloudera Manager CDH5 - Installation Failure on Oozie Database

  - by Nerrve

  While doing the installation, i keep getting a failure on the step "Creating Oozie database" java.lang.Exception: DB schema exists at org.apache.oozie.tools.OozieDBCLI.validateDBSchema(OozieDBCLI.java:877) at org.apache.oozie.tools.OozieDBCLI.createDB(OozieDBCLI.java:184) at org.apache.oozie.tools.OozieDBCLI.run(OozieDBCLI.java:127) at org.apache.oozie.tools.OozieDBCLI.main(OozieDBCLI.java:78) How do i fix this? Where do i get the password/username/dbname for the PostgreSQL database to drop the existing schema? I tried cat /etc/cloudera-scm-server/db*.properties | grep pass and /var/lib/cloudera-scm-server-db/data/generated-password.txt but the passwords don't work!

  Read the article

• How to Route Traffic in Case PPTP Remote Client is on Same Subnet as Server

  - by Marcus Cole

  I've a PPTP server setup on my local home network (192.168.1.0/24, pfSense). Now sometimes when I'm away and want to connect remotely my client (Windows 7) is also on the same network because e.g. the hotel has set it up the same way. Thus the connection works, but I can't reach any PC on my home network because everything is routed directly to the client local router which is in the same subnet. Is there a way to work around this by messing with a configuration or adapting Windows routing table, i.e. without modifying either network?

  Read the article

• 503 error (Service Unavailable) in the jetty server

  - by Ankit

  What is the solution of 503 error (Service Unavailable) in the jetty server. I am using jetty with the eclipse IDE besides the GWT as front end tool. At the same time my one module is running good, but when i try to run my second module which is error free, i get the error 503 service unavailable. Please Help me Ankit

  Read the article

• 64-bit Cisco VPN client (IPsec) ?

  - by mika

  Cisco VPN client (IPsec) does not support 64bit Windows. Worse, Cisco does not even plan to release a 64-bit version, instead they say that "For x64 (64-bit) Windows support, you must utilize Cisco's next-generation Cisco AnyConnect VPN Client." Cisco VPN Client Introduction Cisco VPN Client FAQ But SSL VPN licences cost extra. For example, most new ASA firewalls come with plenty of IPSec VPN licences but only a few SSL VPN licences. What alternatives do you have for 64-bit Windows? So far, I know two: 32-bit Cisco VPN Client on a virtual machine NCP Secure Entry Client on 64-bit Windows Any other suggestions or experiences? -mika-

  Read the article

• Apache Bad Request "Size of a request header field exceeds server limit" with Kerberos SSO

  - by Aurelin

  I'm setting up an SSO for Active Directory users through a website that runs on an Apache (Apache2 on SLES 11.1), and when testing with Firefox it all works fine. But when I try to open the website in Internet Explorer 8 (Windows 7), all I get is "Bad Request Your browser sent a request that this server could not understand. Size of a request header field exceeds server limit. Authorization: Negotiate [ultra long string]" My vhost.cfg looks like this: <VirtualHost hostname:443> LimitRequestFieldSize 32760 LimitRequestLine 32760 LogLevel debug <Directory "/data/pwtool/sec-data/adbauth"> AuthName "Please login with your AD-credentials (Windows Account)" AuthType Kerberos KrbMethodNegotiate on KrbAuthRealms REALM.TLD KrbServiceName HTTP/hostname Krb5Keytab /data/pwtool/conf/http_hostname.krb5.keytab KrbMethodK5Passwd on KrbLocalUserMapping on Order allow,deny Allow from all </Directory> <Directory "/data/pwtool/sec-data/adbauth"> Require valid-user </Directory> SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL SSLCertificateFile /etc/apache2/ssl.crt/hostname-server.crt SSLCertificateKeyFile /etc/apache2/ssl.key/hostname-server.key </VirtualHost> I also made sure that the cookies are deleted and tried several smaller values for LimitRequestFieldSize and LimitRequestLine. Another thing that seems weird to me is that even with LogLevel debug I won't get any logs about this. The log's last line is ssl_engine_kernel.c(1879): OpenSSL: Write: SSL negotiation finished successfully Does anyone have an idea about that?

  Read the article

• Twitterbot/0.1,gzip(gfe),gzip(gfe)

  - by Pete

  I see a lot of this on my google app engine error log: 05-18 06:44AM 00.897 /NTp9 405 17ms 0cpu_ms 0kb Twitterbot/0.1,gzip(gfe),gzip(gfe) 128.242.241.133 - - [18/May/2010:06:44:00 -0700] "HEAD /NTp9 HTTP/1.1" 405 124 - "Twitterbot/0.1,gzip(gfe),gzip(gfe)" Should I do something for it??

  Read the article

• Modify SonicWALL Global VPN Client Encrypted RCF

  - by PaulWaldman

  Presently rolling out VPN to access to a small office. I am using a SonicWALL TZ-170 running SonicOS Enhanced 3.4.1.0-2e. I've created an encrypted RCF file for the clients to import into the SonicWALL Global VPN Client. Is there a way to provide friendly names for the "Connection Name" and "HostName" in the RCF file? If I create an unencrypted RFC file I can easily modify these values. Is there anyway to modify them in an encrypted RCF file? Thanks.

  Read the article

• WebDav rename fails on an Apache mod_dav install behind NginX

  - by The Daemons Advocate

  I'm trying to solve a problem with renaming files over WebDav. Our stack consists of a single machine, serving content through Nginx, Varnish and Apache. When you try to rename a file, the operation fails with the stack that we're currently using. To connect to WebDav, a client program must: Connect over https://host:443 to NginX NginX unwraps and forwards the request to a Varnish server on http://localhost:81 Varnish forwards the request to Apache on http://localhost:82, which offers a session via mod_dav Here's an example of a failed rename: $ cadaver https://webdav.domain/ Authentication required for Webdav on server `webdav.domain': Username: user Password: dav:/> cd sandbox dav:/sandbox/> mkdir test Creating `test': succeeded. dav:/sandbox/> ls Listing collection `/sandbox/': succeeded. Coll: test 0 Mar 12 16:00 dav:/sandbox/> move test newtest Moving `/sandbox/test' to `/sandbox/newtest': redirect to http://webdav.domain/sandbox/test/ dav:/sandbox/> ls Listing collection `/sandbox/': succeeded. Coll: test 0 Mar 12 16:00 For more feedback, the WebDrive windows client logged an error 502 (Bad Gateway) and 303 (?) on the rename operation. The extended logs gave this information: Destination URI refers to different scheme or port (https://hostname:443) (want: http://hostname:82). Some other Restrictions: Investigations into NginX's Webdav modules show that it doesn't really fit our needs, and forwarding webdav traffic to Apache isn't an option because we don't want to enable Apache SSL. Are there any ways to trick mod_dav to forward to another host? I'm open to ideas :).

  Read the article

• QoS for Cisco Router to Prioritize Voice and Interactive Traffic

  - by TJ Huffington

  I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

  Read the article

• Long pause when accessing DFS namespace

  - by Matt

  We've recently migrated our Windows network to use DFS for shared files. DFS is working well, except for one annoying problem: users experience a significant delay when they try to access a DFS namespace that they have not accessed for some time. I have tried to troubleshoot the issue but have not had any success so far, and I was hoping someone here may have some pointers to help resolve the problem. Firstly, some background on our network: The network uses a Windows 2008 functional level Active Directory domain with two Windows 2008 DCs and two DNS servers (one on each of the DCs). The network is DNS only - no WINS. All computers are located at the same site and connected by Gigabit Ethernet. We have approximately 20 Domain-based DFS namespaces in Windows 2008 mode, and each DFS namespace has two Windows 2008 DFS namespace servers (the same two servers for all namespaces). All namespace servers are in FQDN mode and all folder targets are specified using their FQDN. All computers are up-to-date with Service Packs and patches. The actual folder targets (i.e. the SMB shares our DFS folders point to) are scattered across several file and application servers, all running Windows 2008 bar two application servers which run Windows 2003 R2, with no replication setup at all (e.g. all DFS folders currently only have one folder target). Some more detail on the problem: The namespace access delay is generally 1 - 10 seconds long and seems to occur when a particular computer has not accessed the requested namespace for approximately five minutes or more. For example, if the user has not accessed \\domain.name\namespace1\ for more than five minutes and attempts to access \\domain.name\namespace1\ via Windows Explorer, the Explorer window will freeze for 1 - 10 seconds before finally resuming and displaying the folders that exist in \\domain.name\namespace1. If they then close the Explorer window and attempt to access \\domain.name\namespace1\ again within five minutes the contents will be displayed almost instantly - if they wait longer than five minutes it will go through the 1 - 10 second pause again. Once "inside" the namespace everything is nice and snappy, it's just the initial connection to the namespace that is slow. The browsing delays seem to affect all variants of Windows that we use (Windows 2008 x64 SP2, Windows 2003 R2 x86 SP2, Windows XP Pro x86 SP3) - it is possibly a bit worse in Windows XP / 2003 than in Windows 2008, but I'm not sure if the difference isn't just psychological. Accessing the underlying folder targets directly exhibits no delay at all - i.e. if the SMB shares pointed to by DFS are accessed directly (bypassing DFS) then there is no pause. During trouble-shooting I noticed that the "Cache duration" for all of our DFS roots is set to 300 seconds - 5 minutes. Given that this is the same amount of time required to trigger the pause I assume that this caching is somehow related, although I am unsure exactly what is cached on the client and hence what needs to be looked up again after 5 minutes have elapsed. In trying to resolve the problem I have already tried / checked the following (without success): Run dcdiag on both Domain Controllers - no problems found Done some basic DNS server checks without finding any problems - I don't know how to check the DNS servers in detail, but I would add that the network is not exhibiting any other strange behavior that may point to a DNS problem Disabled Anti-virus on clients and servers Removing one of the namespace servers from a couple of namespaces - no difference So that's where I'm up to - and I'm out of ideas. Can anyone suggest what may be causing the delays and/or what I should be trying next?

  Read the article

• URL rewriting in .htaccess

  - by Steven

  Ugly URLs: www.domainname.com/en/piece/piece.php?piece_id=1 www.domainname.com/en/piece/piece.php?piece_id=2 www.domainname.com/en/piece/piece.php?piece_id=3 ... Friendly URLs: piece.domainname.com/en/1 piece.domainname.com/en/2 piece.domainname.com/en/3 ... I want to present website users only friendly URLs. How to do it? Do I have to use RedirectMatch, if so, how to do it?

  Read the article

• Dovecot install: what does this error mean?

  - by jamie

  I have postfix and dovecot installed on CentOS 6 (linode) along with MySQL. The table and user is already set up, postfix installed fine, but dovecot gives me this error in the mail log: Warning: Killed with signal 15 (by pid=9415 uid=0 code=kill) The next few lines say this: Apr 7 16:13:35 dovecot: master: Dovecot v2.0.9 starting up (core dumps disabled) Apr 7 16:13:35 dovecot: config: Warning: NOTE: You can get a new clean config file with: doveconf -n > dovecot-new.conf Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:1: protocols=pop3s is no longer supported. to disable non-ssl pop3, use service pop3-login { inet_listener pop3 { p$ Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:5: ssl_cert_file has been replaced by ssl_cert = <file Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:6: ssl_key_file has been replaced by ssl_key = <file Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:8: namespace private {} has been replaced by namespace { type=private } Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:24: add auth_ prefix to all settings inside auth {} and remove the auth {} section completely Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:25: auth_user has been replaced by service auth { user } I am following directions for the install on CentOS 5 with changes in the dovecot.conf file from different sources specific to CentOS 6. So the dovecot.conf file might not be correct, but there is no good source I have found yet for making dovecot install correctly. Can anyone tell me what the error above means? The terminal does not give any message as to start OK or FAIL. When I issue the service dovecot start command, it says: Starting Dovecot Imap: and nothing more.

  Read the article

• multiple puppet masters

  - by Oli

  I would like to set up an additional puppet master but have the CA server handled by only 1 puppet master. I have set this up as per the documentation here: http://docs.puppetlabs.com/guides/scaling_multiple_masters.html I have configured my second puppet master as follows: [main] ... ca = false ca_server = puppet-master1.test.net I am using passenger so I am a bit confused how the virtual-host.conf file should look for my second puppet-master2.test.net. Here is mine (updated as per Shane Maddens answer): LoadModule passenger_module /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18/ext/apache2/mod_passenger.so PassengerRoot /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18 PassengerRuby /usr/bin/ruby Listen 8140 <VirtualHost *:8140> ProxyPassMatch ^/([^/]+/certificate.*)$ https://puppet-master1.test.net:8140/$1 SSLEngine on SSLProtocol -ALL +SSLv3 +TLSv1 SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:-LOW:-SSLv2:-EXP SSLCertificateFile /var/lib/puppet/ssl/certs/puppet-master2.test.net.pem SSLCertificateKeyFile /var/lib/puppet/ssl/private_keys/puppet-master2.test.net.pem #SSLCertificateChainFile /var/lib/puppet/ssl/ca/ca_crt.pem #SSLCACertificateFile /var/lib/puppet/ssl/ca/ca_crt.pem # If Apache complains about invalid signatures on the CRL, you can try disabling # CRL checking by commenting the next line, but this is not recommended. #SSLCARevocationFile /var/lib/puppet/ssl/ca/ca_crl.pem SSLVerifyClient optional SSLVerifyDepth 1 # The `ExportCertData` option is needed for agent certificate expiration warnings SSLOptions +StdEnvVars +ExportCertData # This header needs to be set if using a loadbalancer or proxy RequestHeader unset X-Forwarded-For RequestHeader set X-SSL-Subject %{SSL_CLIENT_S_DN}e RequestHeader set X-Client-DN %{SSL_CLIENT_S_DN}e RequestHeader set X-Client-Verify %{SSL_CLIENT_VERIFY}e DocumentRoot /etc/puppet/rack/public/ RackBaseURI / <Directory /etc/puppet/rack/> Options None AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> I have commented out the #SSLCertificateChainFile, #SSLCACertificateFile & #SSLCARevocationFile - this is not a CA server so not sure I need this. How would I get passenger to work with these? I would like to use ProxyPassMatch which I have configured as per the documentation. I don't want to specify a ca server in every puppet.conf file. I am getting this error when trying to get create a cert from a puppet client pointing to the second puppet master server (puppet-master2.test.net): [root@puppet-client2 ~]# puppet agent --test Error: Could not request certificate: Could not intern from s: nested asn1 error Exiting; failed to retrieve certificate and waitforcert is disabled On the puppet client I have this [main] server = puppet-master2.test.net What have I missed? -- update Here is a new virtual host file on my secondary puppet master. Is this correct? I have SSL turned off? LoadModule passenger_module /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18/ext/apache2/mod_passenger.so PassengerRoot /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18 PassengerRuby /usr/bin/ruby # you probably want to tune these settings PassengerHighPerformance on PassengerMaxPoolSize 12 PassengerPoolIdleTime 1500 # PassengerMaxRequests 1000 PassengerStatThrottleRate 120 RackAutoDetect Off RailsAutoDetect Off Listen 8140 <VirtualHost *:8140> SSLEngine off ProxyPassMatch ^/([^/]+/certificate.*)$ https://puppet-master1.test.net:8140/$1 # Obtain Authentication Information from Client Request Headers SetEnvIf X-Client-Verify "(.*)" SSL_CLIENT_VERIFY=$1 SetEnvIf X-SSL-Client-DN "(.*)" SSL_CLIENT_S_DN=$1 DocumentRoot /etc/puppet/rack/public/ RackBaseURI / <Directory /etc/puppet/rack/> Options None AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> Cheers, Oli

  Read the article

• Unable to install Wordpress on Amazon's EC2 instance due to missing php-mbstring

  - by alexus

  I've created a new instance on Amazon's EC2 and I'm trying in wordpress and it's failing due to php-mbstring: # yum install wordpress Loaded plugins: amazon-id, rhui-lb Resolving Dependencies --> Running transaction check ---> Package wordpress.noarch 0:3.9.1-1.el7 will be installed --> Processing Dependency: php-simplepie >= 1.3.1 for package: wordpress-3.9.1-1.el7.noarch --> Processing Dependency: php-mbstring for package: wordpress-3.9.1-1.el7.noarch --> Processing Dependency: php-gd for package: wordpress-3.9.1-1.el7.noarch --> Processing Dependency: php-enchant for package: wordpress-3.9.1-1.el7.noarch --> Processing Dependency: php-PHPMailer for package: wordpress-3.9.1-1.el7.noarch --> Running transaction check ---> Package php-PHPMailer.noarch 0:5.2.6-1.el7 will be installed --> Processing Dependency: php-mbstring >= 5.1.0 for package: php-PHPMailer-5.2.6-1.el7.noarch ---> Package php-gd.x86_64 0:5.4.16-21.el7 will be installed --> Processing Dependency: libpng15.so.15(PNG15_0)(64bit) for package: php-gd-5.4.16-21.el7.x86_64 --> Processing Dependency: libt1.so.5()(64bit) for package: php-gd-5.4.16-21.el7.x86_64 --> Processing Dependency: libpng15.so.15()(64bit) for package: php-gd-5.4.16-21.el7.x86_64 --> Processing Dependency: libXpm.so.4()(64bit) for package: php-gd-5.4.16-21.el7.x86_64 --> Processing Dependency: libX11.so.6()(64bit) for package: php-gd-5.4.16-21.el7.x86_64 ---> Package php-simplepie.noarch 0:1.3.1-4.el7 will be installed --> Processing Dependency: php-mbstring for package: php-simplepie-1.3.1-4.el7.noarch --> Processing Dependency: php-IDNA_Convert for package: php-simplepie-1.3.1-4.el7.noarch ---> Package wordpress.noarch 0:3.9.1-1.el7 will be installed --> Processing Dependency: php-mbstring for package: wordpress-3.9.1-1.el7.noarch --> Processing Dependency: php-enchant for package: wordpress-3.9.1-1.el7.noarch --> Running transaction check ---> Package libX11.x86_64 0:1.6.0-2.1.el7 will be installed --> Processing Dependency: libX11-common = 1.6.0-2.1.el7 for package: libX11-1.6.0-2.1.el7.x86_64 --> Processing Dependency: libxcb.so.1()(64bit) for package: libX11-1.6.0-2.1.el7.x86_64 ---> Package libXpm.x86_64 0:3.5.10-5.1.el7 will be installed ---> Package libpng.x86_64 2:1.5.13-5.el7 will be installed ---> Package php-IDNA_Convert.noarch 0:0.8.0-2.el7 will be installed --> Processing Dependency: php-mbstring for package: php-IDNA_Convert-0.8.0-2.el7.noarch ---> Package php-PHPMailer.noarch 0:5.2.6-1.el7 will be installed --> Processing Dependency: php-mbstring >= 5.1.0 for package: php-PHPMailer-5.2.6-1.el7.noarch ---> Package php-simplepie.noarch 0:1.3.1-4.el7 will be installed --> Processing Dependency: php-mbstring for package: php-simplepie-1.3.1-4.el7.noarch ---> Package t1lib.x86_64 0:5.1.2-14.el7 will be installed ---> Package wordpress.noarch 0:3.9.1-1.el7 will be installed --> Processing Dependency: php-mbstring for package: wordpress-3.9.1-1.el7.noarch --> Processing Dependency: php-enchant for package: wordpress-3.9.1-1.el7.noarch --> Running transaction check ---> Package libX11-common.noarch 0:1.6.0-2.1.el7 will be installed ---> Package libxcb.x86_64 0:1.9-5.el7 will be installed --> Processing Dependency: libXau.so.6()(64bit) for package: libxcb-1.9-5.el7.x86_64 ---> Package php-IDNA_Convert.noarch 0:0.8.0-2.el7 will be installed --> Processing Dependency: php-mbstring for package: php-IDNA_Convert-0.8.0-2.el7.noarch ---> Package php-PHPMailer.noarch 0:5.2.6-1.el7 will be installed --> Processing Dependency: php-mbstring >= 5.1.0 for package: php-PHPMailer-5.2.6-1.el7.noarch ---> Package php-simplepie.noarch 0:1.3.1-4.el7 will be installed --> Processing Dependency: php-mbstring for package: php-simplepie-1.3.1-4.el7.noarch ---> Package wordpress.noarch 0:3.9.1-1.el7 will be installed --> Processing Dependency: php-mbstring for package: wordpress-3.9.1-1.el7.noarch --> Processing Dependency: php-enchant for package: wordpress-3.9.1-1.el7.noarch --> Running transaction check ---> Package libXau.x86_64 0:1.0.8-2.1.el7 will be installed ---> Package php-IDNA_Convert.noarch 0:0.8.0-2.el7 will be installed --> Processing Dependency: php-mbstring for package: php-IDNA_Convert-0.8.0-2.el7.noarch ---> Package php-PHPMailer.noarch 0:5.2.6-1.el7 will be installed --> Processing Dependency: php-mbstring >= 5.1.0 for package: php-PHPMailer-5.2.6-1.el7.noarch ---> Package php-simplepie.noarch 0:1.3.1-4.el7 will be installed --> Processing Dependency: php-mbstring for package: php-simplepie-1.3.1-4.el7.noarch ---> Package wordpress.noarch 0:3.9.1-1.el7 will be installed --> Processing Dependency: php-mbstring for package: wordpress-3.9.1-1.el7.noarch --> Processing Dependency: php-enchant for package: wordpress-3.9.1-1.el7.noarch --> Finished Dependency Resolution Error: Package: php-PHPMailer-5.2.6-1.el7.noarch (epel) Requires: php-mbstring >= 5.1.0 Error: Package: php-IDNA_Convert-0.8.0-2.el7.noarch (epel) Requires: php-mbstring Error: Package: wordpress-3.9.1-1.el7.noarch (epel) Requires: php-mbstring Error: Package: php-simplepie-1.3.1-4.el7.noarch (epel) Requires: php-mbstring Error: Package: wordpress-3.9.1-1.el7.noarch (epel) Requires: php-enchant You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest # I'm using RHEL7: # cat /etc/redhat-release Red Hat Enterprise Linux Server release 7.0 (Maipo) # yum repolist Loaded plugins: amazon-id, rhui-lb repo id repo name status epel/x86_64 Extra Packages for Enterprise Linux 7 - x86_64 4,325 rhui-REGION-client-config-server-7/x86_64 Red Hat Update Infrastructure 2.0 Client Configuration Server 7 1 rhui-REGION-rhel-server-releases/7Server/x86_64 Red Hat Enterprise Linux Server 7 (RPMs) 4,447 repolist: 8,773 # a while back and another environment I had to run following command first in order to get access to php-mbstring: rhn-channel --add --channel=rhel-x86_64-server-optional-6 How do you do that in Amazon EC2?:

  Read the article

• How to calculate CPU % based on raw CPU ticks in SNMP

  - by bjeanes

  According to http://net-snmp.sourceforge.net/docs/mibs/ucdavis.html#scalar_notcurrent ssCpuUser, ssCpuSystem, ssCpuIdle, etc are deprecated in favor of the raw variants (ssCpuRawUser, etc). The former values (which don't cover things like nice, wait, kernel, interrupt, etc) returned a percentage value: The percentage of CPU time spent processing user-level code, calculated over the last minute. This object has been deprecated in favour of 'ssCpuRawUser(50)', which can be used to calculate the same metric, but over any desired time period. The raw values return the "raw" number of ticks the CPU spent: The number of 'ticks' (typically 1/100s) spent processing user-level code. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors). My question is: how do you turn the number of ticks into percentage? That is, how do you know how many ticks per second (it's typically — which implies not always — 1/100s, which either means 1 every 100 seconds or that a tick represents 1/100th of a second). I imagine you also need to know how many CPUs there are or you need to fetch all the CPU values to add them all together. I can't seem to find a MIB that gives you an integer value for # of CPUs which makes the former route awkward. The latter route seems unreliable because some of the numbers overlap (sometimes). For example, ssCpuRawWait has the following warning: This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. This time may also be included within the 'ssCpuRawSystem(52)' counter. Some help would be appreciated. Everywhere seems to just say that % is deprecated because it can be derived, but I haven't found anywhere that shows the official standard way to perform this derivation. The second component is that these "ticks" seem to be cumulative instead of over some time period. How do I sample values over some time period? The ultimate information I want is: % of user, system, idle, nice (and ideally steal, though there doesn't seem to be a standard MIB for this) "currently" (over the last 1-60s would probably be sufficient, with a preference for smaller time spans).

  Read the article

• Hot deploying with Tomcat Manager fails because file already exists

  - by Artem

  Tomcat beginner question that I hope will help many. Could someone explain how TomCat hot deploy is supposed to work. We have a currently deployed 'TomCatTest', and we want to fix a small bug in 'TomCatTest' with no downtime for users. We are using the Tomcat Manager console, and just trying to upload a file there. We must be making a stupid error, but we see: 'FAIL - War file "TomCatTest.war" already exists on server' There are many many posts suggesting this works somehow: http://serverfault.com/questions/120706/replace-single-file-on-tomcat-deployed-war http://tomcat.apache.org/tomcat-6.0-doc/config/host.html#Automatic%20Application%20Deployment For the life of me, I can't figure out this simple problem. Could you help, please?

  Read the article

• Installing esx 3.5 on hpblade 460c G7

  - by stillStudent

  I was trying to install ESX 3.5 on hp blade 460c but it fails with error no 'network adapter is detected'. Anybody has work around for this. I also tried to install ESX 4.1, it also had the same problem but in case of 4.1 there is support to add your custom driver while installing. So I added NIC drivers and installation completed successfully. ESX 3.5 installtion does not support adding custom drivers while installing. I can't use ESX 4.1 because it does not support 'license server' configuration and only asks for license file(key). I do not have license keys, I only have vmware license server. That is the reason I have to be with ESX 3.5.

  Read the article

• Connect to a Fortinet VPN with Ubuntu

  - by Dan

  I don't know a lot about VPNs but I'd like to connect to a Fortinet VPN with Ubuntu. I can connect on Windows using Forticlient just by entering the policy server (vpn.theserver.com) and then it asks for a user/password. I use IPSec.

  Read the article

• conversion of a VMDK image with qemu-img failed with "error while reading sector 131072: Invalid argument"

  - by Erik Sjölund

  I tried to convert a VMDK image found in a OVA file to the QCOW2 format with the qemu-img command but it failed with the error message qemu-img: error while reading sector 131072: Invalid argument user@ubuntu:/tmp$ wget ftp://ftp.sanger.ac.uk/pub/databases/Pfam/vm/PfamWeb_20120124.ova user@ubuntu:/tmp$ tar xfv PfamWeb_20120124.ova PfamWeb_20120124_2.ovf PfamWeb_20120124_2.mf PfamWeb_20120124_2-disk1.vmdk user@ubuntu:/tmp$ qemu-img convert -O qcow2 PfamWeb_20120124_2-disk1.vmdk PfamWeb_20120124_2.qcow2 qemu-img: error while reading sector 131072: Invalid argument user@ubuntu:/tmp$ qemu-img --version | grep "qemu-img version" qemu-img version 1.0, Copyright (c) 2004-2008 Fabrice Bellard user@ubuntu:/tmp$ dpkg-query -f='${Version}\n' --show qemu-utils 1.0+noroms-0ubuntu14.1 user@ubuntu:/tmp$ cat /etc/issue Ubuntu 12.04.1 LTS \n \l How do I avoid the error?

  Read the article

• DHCP "no answer" on CentOS 6.4

  - by Kev

  I installed a DHCP server (yum install dhcp) and this is my conf: # create new # specify domain name option domain-name "mydomain.name"; # specify DNS's hostname or IP address option domain-name-servers 10.0.1.1, 10.0.1.2; option ntp-servers 10.0.1.1, 10.0.1.2; allow unknown-clients; # default lease time default-lease-time 2628000; # max lease time max-lease-time 2628000; # about a month # this DHCP server to be declared valid authoritative; # specify network address and subnet mask subnet 10.0.0.0 netmask 255.0.0.0 { # specify the range of lease IP address range dynamic-bootp 10.0.2.1 10.0.2.50; # specify broadcast address option broadcast-address 10.255.255.255; # specify default gateway option routers 10.0.0.1; allow unknown-clients; } service dhcp start reports [ OK ]. Yet, if I disable my other DHCP server (Win2k3) and get a client to try renewing its IP lease, it times out. So I installed dhcping. No matter what options I try, including directing dhcping at my server, adding a client address in the range, adding my hardware address, it replies 'no answer'. I'm also trying -i since that seems to be more akin to what a WinXP client would try to do, based on /var/log/messages. It logs the attempts (from dhcping here) as: Oct 24 18:55:13 newdc dhcpd: DHCPINFORM from 10.0.2.15 via eth0:4 Oct 24 18:55:13 newdc dhcpd: DHCPACK to 10.0.2.15 (00:11:25:66:4e:7f) via eth0:4 Oct 24 18:55:13 newdc dhcpd: DHCPINFORM from 10.0.2.15 via eth0:3 Oct 24 18:55:13 newdc dhcpd: DHCPACK to 10.0.2.15 (00:11:25:66:4e:7f) via eth0:3 Oct 24 18:55:13 newdc dhcpd: DHCPINFORM from 10.0.2.15 via eth0 Oct 24 18:55:13 newdc dhcpd: DHCPACK to 10.0.2.15 (00:11:25:66:4e:7f) via eth0 The :3 and :4 are because I have a few extra Host(A) records for this server so it responds on more than one IP for our intranet app. No answer? It sounds like it should be getting three answers...no? (And if that's the problem, how do I limit the DHCP service to replying from eth0?)

  Read the article

• Adding data sources for unixODBC/isql on Mac OSX Lion

  - by NP01

  I have installed unixODBC from source and mysql-odbc connector from .dmg installer on Mac OSX Lion. This was done a while ago, and at that time I successfully installed a data source (let's call it foo). Now I am trying to add another data source (DSN). I've done this through both ODBC Manager and the command-line tool myodbc-installer given with the tar bundle of the mysql-odbc connector from the mysql website. An entry shows up in /Library/ODBC/odbc.ini, which looks like this: [ODBC Data Sources] bar = MySQL ODBC 5.1 Driver [ODBC] Trace = 0 TraceAutoStop = 0 TraceFile = TraceLibrary = [myodbc] Driver = /usr/local/lib/libmyodbc5.so SERVER = localhost PORT = 3306 [bar] Driver = /usr/local/lib/libmyodbc5.so Description = DATABASE = bar However, isql fails to find it: anitya:Preferences neil$ isql bar bar bar -v [IM002][unixODBC][Driver Manager]Data source name not found, and no default driver specified [ISQL]ERROR: Could not SQLConnect Weird thing is, the old DSN foo, which is not to be seen in /Library/ODBC/odbc.ini or /etc/odbc.ini, works fine: anitya:Preferences neil$ isql foo foo foo +---------------------------------------+ | Connected! | | | | sql-statement | | help [tablename] | | quit | | | +---------------------------------------+ SQL> I'm miffed about where the DSN entries need to be entered on OSX Lion to be found by isql. Thanks in advance for your help!

  Read the article

• SUSE 12.1 Apache startup after oci8 installation

  - by DKSan

  I have got a virtual server running opensuse 11.4 with apache, php, oracle instantclient, and oci installed through pecl. The steps it took for me to have it up and running on 11.4 were: # Install instantclient rpm -Uvh oracle-instantclient11.2-basic-11.2.0.2.0.x86_64.rpm rpm -Uvh oracle-instantclient11.2-devel-11.2.0.2.0.x86_64.rpm # Install OCI8 through pecl pecl install oci8 # add oci8 to modules vi /etc/php5/conf.d/oci8.ini extension=oci8.so # add LD_LIBRARY_PATH to apache vi /etc/sysconfig/apache2 # add to bottom of script export LD_LIBRARY_PATH="/usr/lib/oracle/11.2/client64/lib" # restart Apache /etc/init.d/apache2 restart Celebrating the same procedure on a fresh installation of OpenSUSE 12.1 results in apache throwing the following message at startup: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php5/extensions/oci8.so' - libnnz11.so: cannot open shared object file: No such file or directory in Unknown on line 0 I can't get any explanation, why it is working for 11.4 and in 12.1 it stops working. Can someone please point me in the right direction..

  Read the article

< Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >