Search Results

Search found 25123 results on 1005 pages for 'domain model'.

Page 969/1005 | < Previous Page | 965 966 967 968 969 970 971 972 973 974 975 976  | Next Page >

  • How to diagnose computer lockup/freezing problem

    - by Scott Mitchell
    I built a desktop computer a couple years back with the following specs: CPU: Intel Core 2 Quad Q9300 Yorkfield 2.5GHz 6MB L2 Cache LGA 775 95W Quad-Core Processor BX80580Q9300 Motherboard: EVGA 122-CK-NF68-T1 LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard Video Card: Two EVGA 256-P2-N758-TR GeForce 8600GT SCC 256MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card PSU: SeaSonic S12 Energy Plus SS-550HT 550W ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS Certified Active PFC Power Supply Memory: Two G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-4GBPQ Since its inception, the machine has periodically locked up, the regularlity having varied over the years from once a day to once a month. Typically, lockups happen once every few days. By "lockup" I mean my computer just freezes. The screen locks up, I can't move the mouse. Hitting keys on my keyboard that normally turn LEDs on or off on the keyboard (such as Caps Lock) no longer turn the LEDs on or off. If there was music playing at the time of the lockup, noise keeps coming out of the speakers, but it's just the current frequency/note that plays indefinitely. There is no BSOD. When such a lockup occurs I have to do a hard reboot by either turning off the computer or hitting the reset button. I have the most recent version of the NVIDIA hardware drivers, and update them semi-regularly, but that hasn't seemed to help. I am currently using Windows 7 x64, but was previously using Windows Server 2003 x64 and having the same lockup issues. My guess is that it's somehow video driver or motherboard related, but I don't know how to go about diagnosing this problem to narrow down which of the two is the culprit. Additional information re: cooling Regarding cooling... I've not installed any after-market cooling systems aside from two regular fans I scavenged from an older computer. The fan atop the CPU is the one that shipped with it. One of the two scavenged fans I added it located at the bottom tower of the corner, in an attempt to create some airflow from front to back. The second fan is pointed directly at the two video cards. SpeedFan installation and readings Per studiohack's suggestion, I installed SpeedFan, which provided the following temperature readings: GPU: 63C GPU: 65C System: 76C CPU: 64C AUX: 36C Core 0: 78C Core 1: 76C Core 2: 79C Core 3: 79C Update #3: Another Lockup :-( Well, I had another lockup last night. :-( SpeedFan reported the CPU temp at 38 C when it happened, and there was no spike in temperature leading up to the freeze. One thing I notice is that the freeze seems more likely to happen if I am watching a video. In fact, of the last 5 freezes over the past month, 4 of them have been while watching a video on Flickr. Not necessarily the same video, but a video nevertheless. I don't know if this is just coincidence or if it means anything. (As an aside, each night before bedtime my 2 year old daughter sits on my lap and watches some home videos on Flickr and, in the last month, has learned the phrase, "Uh oh, computer broke.") Update #4: MemTest86 and 3DMark06 Test Results: Per suggestions in the comments, I ran the MemTest86 overnight and it cycled through the 8 GB of memory 5 times without error. I also ran the 3DMark06 test without a problem (see my scores at http://3dmark.com/3dm06/15163549). So... what now? :-) Any further suggestions on what to check? Is there some way to get a stack trace or something when the computer locks like that? Thanks

    Read the article

  • CentOS 6.2 Bridge Setup for KVM

    - by Gaia
    I'm trying to set up bridged networking with KVM on CentOS 6.2 to no avail. There are plenty of docs and tutorials about it, but they all seem to conflict or don't provide info specific enough to my situation. I just don't get it. I access the host via public IP "xxx.xxx.128.58". All other available IPs (/29) should be bridged and made available to the only KVM guest (running a public facing LAMP stack) that will be setup on this machine. The amazingly unhelpful NOC people assigned the extra IPs to eth1. Is this correct? Should br0 bridge to eth0 or eth1? How do I set this up? Here is the relevant info: eth0 Link encap:Ethernet HWaddr 00:25:90:68:FE:BC inet6 addr: fe80::225:90ff:fe68:febc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:763 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:550811 (537.9 KiB) TX bytes:648 (648.0 b) Memory:fb980000-fba00000 eth1 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.58 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 inet6 addr: fe80::225:90ff:fe68:febd/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1806 errors:0 dropped:0 overruns:0 frame:0 TX packets:1505 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:133166 (130.0 KiB) TX bytes:106070 (103.5 KiB) Memory:fb900000-fb980000 eth1:0 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.59 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 eth1:1 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.60 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 eth1:2 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.61 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 eth1:3 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.62 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) virbr0 Link encap:Ethernet HWaddr 52:54:00:62:55:68 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > cat /etc/sysconfig/network NETWORKING=yes HOSTNAME=XXXX.domain.com > brctl show bridge name bridge id STP enabled interfaces br0 8000.00259068febc no eth0 virbr0 8000.525400625568 yes virbr0-nic > ls -fl | grep ifcfg -rw-r--r-- 1 root root 198 Jun 7 10:58 ifcfg-eth0 -rw-r--r--. 1 root root 254 Oct 7 2011 ifcfg-lo -rw-r--r-- 1 root root 77 Jun 6 18:51 ifcfg-eth1-range0 -rw-r--r-- 1 root root 168 Jun 6 18:50 ifcfg-eth1 > cat ifcfg-eth0 DEVICE="eth0" BOOTPROTO="static" BRIDGE="br0" HWADDR="00:25:90:68:FE:BC" IPV6INIT="yes" MTU="1500" NM_CONTROLLED="yes" ONBOOT="yes" TYPE="Ethernet" IPADDR="yyy.yyy.216.131" NETMASK="255.255.255.128" > cat ifcfg-eth1 DEVICE="eth1" HWADDR="00:25:90:68:FE:BD" NM_CONTROLLED="yes" ONBOOT="yes" BOOTPROTO="static" IPADDR="xxx.xxx.128.58" NETMASK="255.255.255.248" GATEWAY="xxx.xxx.128.57" > cat ifcfg-eth1-range0 IPADDR_START="xxx.xxx.128.59" IPADDR_END="xxx.xxx.128.62" CLONENUM_START="0" Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface xxx.xxx.128.56 * 255.255.255.248 U 0 0 0 eth1 192.168.122.0 * 255.255.255.0 U 0 0 0 virbr0 link-local * 255.255.0.0 U 1003 0 0 eth1 default xxx.xxx.128.57 0.0.0.0 UG 0 0 0 eth1

    Read the article

  • Securing smtp with login

    - by Paul Peelen
    I have a ispconfig server, and it seems that someone is using it to send spam. I got about 130 "Mail Delivery System" email about declined send email. This spammer uses my email address as sent from adress, so I get all these email adresses to my mail. I am using Postfix and Courier. I installed my server according to this guide: http://www.howtoforge.com/perfect-server-debian-lenny-ispconfig3-p3 I did this a few months ago. My question: Can I secure my server to require login to be able to send email, and if so... how? Thanks! EDIT Some data from mail.log, these kind of error show up constantly: Jun 15 17:58:16 bolt postfix/qmgr[10712]: CC7DA1242AE: from=<paul@*****.se>, size=3782, nrcpt=1 (queue active) Jun 15 17:58:16 bolt postfix/smtp[11337]: CC7DA1242AE: to=<[email protected]>, relay=none, delay=4641, delays=4640/0.01/0.32/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=cmlisboa.pt type=MX: Host not found, try again) Jun 15 17:58:19 bolt postfix/smtpd[10836]: connect from static-200-105-220-154.acelerate.net[200.105.220.154] Jun 15 17:58:20 bolt postfix/smtpd[10836]: NOQUEUE: reject: RCPT from static-200-105-220-154.acelerate.net[200.105.220.154]: 550 5.1.1 <advertising@*****.com>: Recipient address rejected: User unknown in virtual mailbox table; from=<[email protected]> to=<advertising@*****.com> proto=ESMTP helo=<static-200-105-220-154.acelerate.net> Jun 15 17:58:20 bolt postfix/smtpd[10836]: lost connection after DATA (0 bytes) from static-200-105-220-154.acelerate.net[200.105.220.154] Jun 15 17:58:20 bolt postfix/smtpd[10836]: disconnect from static-200-105-220-154.acelerate.net[200.105.220.154] Jun 15 17:58:29 bolt postfix/smtpd[10834]: connect from unknown[62.176.172.226] Jun 15 17:58:32 bolt postfix/smtpd[10834]: 386791241F9: client=unknown[62.176.172.226] Jun 15 17:58:34 bolt postfix/cleanup[10975]: 386791241F9: message-id=<[email protected]> Jun 15 17:58:34 bolt postfix/qmgr[10712]: 386791241F9: from=<[email protected]>, size=867, nrcpt=1 (queue active) Jun 15 17:58:35 bolt postfix/smtpd[10834]: disconnect from unknown[62.176.172.226] Jun 15 17:58:35 bolt amavis[11084]: (11084-17) Blocked SPAM, [62.176.172.226] [62.176.172.226] <[email protected]> -> <*****@*****>, Message-ID: <[email protected]>, mail_id: XczovKoMBYNr, Hits: 18.471, size: 867, 833 ms Jun 15 17:58:35 bolt postfix/smtp[10732]: 386791241F9: to=<*****@*****>, relay=127.0.0.1[127.0.0.1]:10024, delay=3.5, delays=2.7/0/0/0.83, dsn=2.7.0, status=sent (250 2.7.0 Ok, discarded, id=11084-17 - SPAM) Jun 15 17:58:35 bolt postfix/qmgr[10712]: 386791241F9: removed Jun 15 17:58:43 bolt postfix/smtpd[10836]: warning: 178.121.154.194: address not listed for hostname mm-194-154-121-178.dynamic.pppoe.mgts.by Jun 15 17:58:43 bolt postfix/smtpd[10836]: connect from unknown[178.121.154.194] Jun 15 17:58:45 bolt postfix/smtpd[10727]: connect from unknown[180.134.223.86] EDIT #2 Got some more info from the logs, this is a send request: mail.info.1:Jun 15 16:41:57 bolt amavis[5399]: (05399-06) Passed CLEAN, [110.139.48.64] [110.139.48.64] <paul@*****.se> -> <[email protected]>, Message-ID: <CHILKAT-MID-7c54ebcf-5501-de9b-f0b1-4f0234290d8d@HP-IRISH>, mail_id: 35l56Ramx6Nc, Hits: -2.941, size: 3329, queued_as: 2485770086, 136 ms mail.info.1:Jun 15 16:41:57 bolt postfix/smtp[4743]: 375C570082: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=4.8, delays=4.7/0/0/0.14, dsn=2.0.0, status=sent (250 2.0.0 Ok, id=05399-06, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 2485770086) Which apparently got thrue. Any ideas how to restrict this?

    Read the article

  • mod_mono 'Service Temporarily Unavailable' issue

    - by Charlie Somerville
    I've deployed an ASP.NET web application on a Linux (Debian) server running Apache 2.2 and mod_mono 1.9 It's working well, however Mono occasionally segfaults and uses the entire CPU which causes the website to stop working and display 'Service Temporarily Unavailable' Killing mono fixes it, but obviously this isn't a good solution. I tailed the system log after this happened and I saw the following error messages from the kernel: Apr 20 01:49:37 charliesomerville kernel: [1596436.204158] mono[17909]: segfault at b645f671 ip b645f671 sp b4ffb604 error 4<6>mono[19047]: segfault at b645f66e ip b645f66e sp b4bf7604 error 4<6>mono[18017]: segfault at b645f66e ip b645f66e sp b52fe604 error 4<6>mono[19668]: segfault at b645f5e6 ip b645f5e6 sp b48f4604 error 4<6>mono[22565]: segfault at b645f674 ip b645f674 sp b45f1604 error 4<6>mono[17700]: segfault at b645f661 ip b645f661 sp b51fd604 error 4<6>mono[19596]: segfault at b645f5e6 ip b645f5e6 sp b49f5604 error 4 Apr 20 01:49:37 charliesomerville kernel: [1596436.208172] mono[23219]: segfault at b645f66e ip b645f66e sp b44f0604 error 4 At the end of Apache's error.log are the following errors: [Tue Apr 20 03:10:23 2010] [error] (70014)End of file found: read_data failed [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 System.ArgumentNullException: null key Parameter name: key at System.Collections.Hashtable.get_Item (System.Object key) [0x00000] at System.Runtime.Serialization.SerializationCallbacks.GetSerializationCallbacks (System.Type t) [0x00000] at System.Runtime.Serialization.ObjectManager.RaiseOnDeserializingEvent (System.Object obj) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectContent (System.IO.BinaryReader reader, System.Runtime.Serialization.Formatters.Binary.TypeMetadata metadata, Int64 objectId, System.Object& objectInstance, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectInstance (System.IO.BinaryReader reader, Boolean isRuntimeObject, Boolean hasTypeInfo, System.Int64& objectId, System.Object& value, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObject (BinaryElement element, System.IO.BinaryReader reader, System.Int64& objectId, System.Object& value, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadNextObject (System.IO.BinaryReader reader) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectGraph (System.IO.BinaryReader reader, Boolean readHeaders, System.Object& result, System.Runtime.Remoting.Messaging.Header[]& headers) [0x00000] at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.NoCheckDeserialize (System.IO.Stream serializationStream, System.Runtime.Remoting.Messaging.HeaderHandler handler) [0x00000] at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize (System.IO.Stream serializationStream) [0x00000] at System.Runtime.Remoting.Channels.CADSerializer.DeserializeObject (System.IO.MemoryStream mem) [0x00000] at System.Runtime.Remoting.RemotingServices.GetDomainProxy (System.AppDomain domain) [0x00000] at System.AppDomain.CreateDomain (System.String friendlyName, System.Security.Policy.Evidence securityInfo, System.AppDomainSetup info) [0x00000] at System.Web.Hosting.ApplicationHost.CreateApplicationHost (System.Type hostType, System.String virtualDir, System.String physicalDir) [0x00000] at Mono.WebServer.VPathToHost.CreateHost (Mono.WebServer.ApplicationServer server, Mono.WebServer.WebSource webSource) [0x00000] at Mono.WebServer.ApplicationServer.GetApplicationForPath (System.String vhost, Int32 port, System.String path, Boolean defaultToRoot) [0x00000] at (wrapper remoting-invoke-with-check) Mono.WebServer.ApplicationServer:GetApplicationForPath (string,int,string,bool) at Mono.WebServer.ModMonoWorker.GetOrCreateApplication (System.String vhost, Int32 port, System.String filepath, System.String virt) [0x00000] at Mono.WebServer.ModMonoWorker.InnerRun (System.Object state) [0x00000] at Mono.WebServer.ModMonoWorker.Run (System.Object state) [0x00000] [Tue Apr 20 03:10:26 2010] [error] (70014)End of file found: read_data failed [Tue Apr 20 03:10:26 2010] [error] Command stream corrupted, last command was -1 Along with the above errors, Apache's error.log is packed with hundreds (if not thousands) of the following error: Maximum number (20) of concurrent mod_mono requests to /tmp/mod_mono_dashboard_default_2.lock reached. Droping request. At the moment, I'm thinking there might be something wrong with configuration here (it's basically running on out-of-the-box config)

    Read the article

  • Linux bcm43224 wifi adapter slows down a couple minutes after boot

    - by Blubber
    I just installed Ubuntu on my mid 2012 MacBook Air. Everything worked out of the box, but the wifi is showing some weird behavior. When I first login it's really fast, loading google.com is near instant, and browsing in general feels at least as smooth as it did on Mac OS. However, after a couple minutes the connection slows down dramatically, sometimes it takes over 5s to load google.com, a simple reboot fixes the problem for another couple minutes. Specs: Wifi: 02:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01) Driver: open-source brcmsmac driver Kernel: Linux wega 3.8.0-21-generic #32-Ubuntu SMP Tue May 14 22:16:46 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Distro: Ubuntu 13.04 (uptodate) I tried a number of things, none of which actually helped Use proprietary sta driver from broadcom Installed firmware into /lib/firmware/brcms (which, as far as I can tell from logs, does not get loaded at all) Switch router to only use 2.4 OR 5 GHz Set router to only use a OR g OR n Set router to use AES encryption only Turned off power management on the adapter Set regulatory region to the correct value (NL) on both router and laptop Disable ipv6 Nothing seems to help, the slowdown always occurs. I did notice that the latency (ping google.com) stays roughly the same (around 9ms). Below is some more information that might be of use. $ lspci -nnk | grep -iA2 net 02:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01) Subsystem: Apple Inc. Device [106b:00e9] Kernel driver in use: bcma-pci-bridge $ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no $ lsmod Module Size Used by dm_crypt 22820 1 arc4 12615 2 brcmsmac 550698 0 coretemp 13355 0 kvm_intel 132891 0 parport_pc 28152 0 kvm 443165 1 kvm_intel ppdev 17073 0 cordic 12574 1 brcmsmac brcmutil 14755 1 brcmsmac mac80211 606457 1 brcmsmac cfg80211 510937 2 brcmsmac,mac80211 bnep 18036 2 rfcomm 42641 12 joydev 17377 0 applesmc 19353 0 input_polldev 13896 1 applesmc snd_hda_codec_hdmi 36913 1 microcode 22881 0 snd_hda_codec_cirrus 23829 1 nls_iso8859_1 12713 1 uvcvideo 80847 0 btusb 22474 0 snd_hda_intel 39619 3 videobuf2_vmalloc 13056 1 uvcvideo snd_hda_codec 136453 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_cirrus bcm5974 17347 0 bluetooth 228619 22 bnep,btusb,rfcomm snd_hwdep 13602 1 snd_hda_codec lpc_ich 17061 0 videobuf2_memops 13202 1 videobuf2_vmalloc videobuf2_core 40513 1 uvcvideo videodev 129260 2 uvcvideo,videobuf2_core bcma 41051 1 brcmsmac snd_pcm 97451 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30180 1 snd_seq_midi snd_seq 61554 2 snd_seq_midi_event,snd_seq_midi snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 29425 2 snd_pcm,snd_seq snd 68876 16 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_hda_codec_cirrus mei 41158 0 soundcore 12680 1 snd apple_bl 13673 0 mac_hid 13205 0 lp 17759 0 parport 46345 3 lp,ppdev,parport_pc usb_storage 57204 0 hid_apple 13237 0 hid_generic 12540 0 ghash_clmulni_intel 13259 0 aesni_intel 55399 399 aes_x86_64 17255 1 aesni_intel xts 12885 1 aesni_intel lrw 13257 1 aesni_intel gf128mul 14951 2 lrw,xts ablk_helper 13597 1 aesni_intel cryptd 20373 4 ghash_clmulni_intel,aesni_intel,ablk_helper i915 600351 3 ahci 25731 3 libahci 31364 1 ahci video 19390 1 i915 i2c_algo_bit 13413 1 i915 drm_kms_helper 49394 1 i915 usbhid 47074 0 drm 286313 4 i915,drm_kms_helper hid 101002 3 hid_generic,usbhid,hid_apple $ dmesg | egrep 'b43|bcma|brcm|[F]irm' [ 0.055025] [Firmware Bug]: ioapic 2 has no mapping iommu, interrupt remapping will be disabled [ 0.152336] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 2.187681] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-99] only partially covers this bridge [ 12.553600] bcma-pci-bridge 0000:02:00.0: enabling device (0000 -> 0002) [ 12.553657] bcma: bus0: Found chip with id 0xA8D8, rev 0x01 and package 0x08 [ 12.553688] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0) [ 12.553715] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0) [ 12.553764] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0) [ 12.605777] bcma: bus0: Bus registered [ 12.852925] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 17 [ 13.085176] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 13.085186] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement) [ 20.862617] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated [ 20.862622] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 20.862625] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 20.897957] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) $ iwconfig lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"wlan" Mode:Managed Frequency:5.22 GHz Access Point: E0:46:9A:4E:63:9A Bit Rate=65 Mb/s Tx-Power=17 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=63/70 Signal level=-47 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:13 Invalid misc:56 Missed beacon:0

    Read the article

  • Making sense of S.M.A.R.T

    - by James
    First of all, I think everyone knows that hard drives fail a lot more than the manufacturers would like to admit. Google did a study that indicates that certain raw data attributes that the S.M.A.R.T status of hard drives reports can have a strong correlation with the future failure of the drive. We find, for example, that after their first scan error, drives are 39 times more likely to fail within 60 days than drives with no such errors. First errors in re- allocations, offline reallocations, and probational counts are also strongly correlated to higher failure probabil- ities. Despite those strong correlations, we find that failure prediction models based on SMART parameters alone are likely to be severely limited in their prediction accuracy, given that a large fraction of our failed drives have shown no SMART error signals whatsoever. Seagate seems like it is trying to obscure this information about their drives by claiming that only their software can accurately determine the accurate status of their drive and by the way their software will not tell you the raw data values for the S.M.A.R.T attributes. Western digital has made no such claim to my knowledge but their status reporting tool does not appear to report raw data values either. I've been using HDtune and smartctl from smartmontools in order to gather the raw data values for each attribute. I've found that indeed... I am comparing apples to oranges when it comes to certain attributes. I've found for example that most Seagate drives will report that they have many millions of read errors while western digital 99% of the time shows 0 for read errors. I've also found that Seagate will report many millions of seek errors while Western Digital always seems to report 0. Now for my question. How do I normalize this data? Is Seagate producing millions of errors while Western digital is producing none? Wikipedia's article on S.M.A.R.T status says that manufacturers have different ways of reporting this data. Here is my hypothesis: I think I found a way to normalize (is that the right term?) the data. Seagate drives have an additional attribute that Western Digital drives do not have (Hardware ECC Recovered). When you subtract the Read error count from the ECC Recovered count, you'll probably end up with 0. This seems to be equivalent to Western Digitals reported "Read Error" count. This means that Western Digital only reports read errors that it cannot correct while Seagate counts up all read errors and tells you how many of those it was able to fix. I had a Seagate drive where the ECC Recovered count was less than the Read error count and I noticed that many of my files were becoming corrupt. This is how I came up with my hypothesis. The millions of seek errors that Seagate produces are still a mystery to me. Please confirm or correct my hypothesis if you have additional information. Here is the smart status of my western digital drive just so you can see what I'm talking about: james@ubuntu:~$ sudo smartctl -a /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD1001FALS-00E3A0 Serial Number: WD-WCATR0258512 Firmware Version: 05.01D05 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Jun 10 19:52:28 2010 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 179 175 021 Pre-fail Always - 4033 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 270 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 1468 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 262 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 46 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 223 194 Temperature_Celsius 0x0022 105 102 000 Old_age Always - 42 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0

    Read the article

  • Intermittent 404 on select assets, LAMP stack

    - by Tom Lagier
    We have a LAMP stack WordPress server that is serving most assets correctly. However, one plugin's CSS file and several images are returning soft 404s roughly 20% of the time. I can't find any reference to the 404 in the access logs, but the browser is definitely receiving a 404 response from somewhere (WordPress, I would assume). When I use an alias URL that does not match the site URL but does resolve to the asset path, the resource loads correctly 100% of the time. However, using the site url only resolves for the select, problematic assets 20% of the time. You can test one of the problematic assets here: http://www.mreco.org/wp-content/uploads/2014/05/zero-cost.jpg However the alias link always resolves correctly: http://mr-eco.wordpress.promocampaigns.com/wp-content/uploads/2014/05/zero-cost.jpg Stranger, if I attempt to access outdated content that definitely does not exist on the server, at the live URL it returns the content roughly 50% of the time. Using the alias link, it 404s 100% of the time - the correct behavior. Error log and PHP error log are clean. A sample access log (pulled from grep 'zero-cost.jpg' /var/log/httpd/mr-eco-access_log) from several refreshes of the live direct link (where I am not seeing any 404's): 10.166.202.202 - - [28/May/2014:20:27:41 +0000] "GET /wp-content/uploads/2014/05/zero-cost.jpg HTTP/1.1" 304 - 10.166.202.202 - - [28/May/2014:20:27:42 +0000] "GET /wp-content/uploads/2014/05/zero-cost.jpg HTTP/1.1" 304 - 10.166.202.202 - - [28/May/2014:20:27:43 +0000] "GET /wp-content/uploads/2014/05/zero-cost.jpg HTTP/1.1" 304 - 10.166.202.202 - - [28/May/2014:20:27:43 +0000] "GET /wp-content/uploads/2014/05/zero-cost.jpg HTTP/1.1" 304 - 10.176.201.37 - - [28/May/2014:20:27:56 +0000] "GET /wp-content/uploads/2014/05/zero-cost.jpg HTTP/1.1" 200 57027 Chrome's dev tools list the following network activity before displaying 404 page content: zero-cost.jpg /wp-content/uploads/2014/05 GET 404 Not Found text/html Other 15.9?KB 73.2?KB 953?ms 947?ms My Apache configuration is standard, I've listed the virtual host entry and .htaccess file below. I can provide other parts of Apache config if necessary. Virtual host: <VirtualHost *:80> DocumentRoot /var/www/public_html/mr-eco.wordpress.promocampaigns.com ServerName www.mreco.org ServerAlias mreco.org mr-eco.wordpress.promocampaigns.com ErrorLog logs/mr-eco-error_log CustomLog logs/mr-eco-access_log common <Directory /var/www/public_html/mr-eco.wordpress.promocampaigns.com> AllowOverride All SetOutputFilter DEFLATE </Directory> </VirtualHost> .htaccess: # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress I have checked for multiple A records and can confirm that there is a single A record pointing at the domain: ;; ANSWER SECTION: mreco.org. 60 IN A 50.18.58.174 I'm fairly new to systems administration, and at a complete loss as to what could cause this. In the past, inconsistently 404ing assets have been because of out-of-sync instances behind a load balancer. In this case, it is a single instance behind the load balancer. Because of the inconsistency, it feels like a caching issue. We don't make use of Apache caching, and as far as I know WordPress should not be caching either. What I've done so far: Reset WordPress permalinks Disabled WordPress plugins Re-generated WordPress .htaccess file Swapped ServerName and ServerAlias directives Cleared browser cache Confirmed disk location of resources Checked PHP, access, and error logs Confirmed correct DNS setup (can post if necessary) I'm at a total loss. Thanks for helping me out!

    Read the article

  • Courier Maildrop error user unknown. Command output: Invalid user specified

    - by cad
    Hello I have a problem with maildrop. I have read dozens of webs/howto/emails but couldnt solve it. My objective is moving automatically spam messages to a spam folder. My email server is working perfectly. It marks spam in subject and headers using spamassasin. My box has: Ubuntu 9.04 Web: Apache2 + Php5 + MySQL MTA: Postfix 2.5.5 + SpamAssasin + virtual users using mysql IMAP: Courier 0.61.2 + Courier AuthLib WebMail: SquirrelMail I have read that I could use Squirrelmail directly (not a good idea), procmail or maildrop. As I already have maildrop in the box (from courier) I have configured the server to use maildrop (added an entry in transport table for a virtual domain). I found this error in email: This is the mail system at host foo.net I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to postmaster. If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system <[email protected]>: user unknown. Command output: Invalid user specified. Final-Recipient: rfc822; [email protected] Action: failed Status: 5.1.1 Diagnostic-Code: x-unix; Invalid user specified. ---------- Forwarded message ---------- From: test <[email protected]> To: [email protected] Date: Sat, 1 May 2010 19:49:57 +0100 Subject: fail fail An this in the logs May 1 18:50:18 foo.net postfix/smtpd[14638]: connect from mail-bw0-f212.google.com[209.85.218.212] May 1 18:50:19 foo.net postfix/smtpd[14638]: 8A9E9DC23F: client=mail-bw0-f212.google.com[209.85.218.212] May 1 18:50:19 foo.net postfix/cleanup[14643]: 8A9E9DC23F: message-id=<[email protected]> May 1 18:50:19 foo.net postfix/qmgr[14628]: 8A9E9DC23F: from=<[email protected]>, size=1858, nrcpt=1 (queue active) May 1 18:50:23 foo.net postfix/pickup[14627]: 1D4B4DC2AA: uid=5002 from=<[email protected]> May 1 18:50:23 foo.net postfix/cleanup[14643]: 1D4B4DC2AA: message-id=<[email protected]> May 1 18:50:23 foo.net postfix/pipe[14644]: 8A9E9DC23F: to=<[email protected]>, relay=spamassassin, delay=3.8, delays=0.55/0.02/0/3.2, dsn=2.0.0, status=sent (delivered via spamassassin service) May 1 18:50:23 foo.net postfix/qmgr[14628]: 8A9E9DC23F: removed May 1 18:50:23 foo.net postfix/qmgr[14628]: 1D4B4DC2AA: from=<[email protected]>, size=2173, nrcpt=1 (queue active) **May 1 18:50:23 foo.netpostfix/pipe[14648]: 1D4B4DC2AA: to=<[email protected]>, relay=maildrop, delay=0.22, delays=0.06/0.01/0/0.15, dsn=5.1.1, status=bounced (user unknown. Command output: Invalid user specified. )** May 1 18:50:23 foo.net postfix/cleanup[14643]: 4C2BFDC240: message-id=<[email protected]> May 1 18:50:23 foo.net postfix/qmgr[14628]: 4C2BFDC240: from=<>, size=3822, nrcpt=1 (queue active) May 1 18:50:23 foo.net postfix/bounce[14651]: 1D4B4DC2AA: sender non-delivery notification: 4C2BFDC240 May 1 18:50:23 foo.net postfix/qmgr[14628]: 1D4B4DC2AA: removed May 1 18:50:24 foo.net postfix/smtp[14653]: 4C2BFDC240: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[209.85.211.97]:25, delay=0.91, delays=0.02/0.03/0.12/0.74, dsn=2.0.0, status=sent (250 2.0.0 OK 1272739824 37si5422420ywh.59) May 1 18:50:24 foo.net postfix/qmgr[14628]: 4C2BFDC240: removed My config files: http://lar3d.net/main.cf (/etc/postfix) http://lar3d.net/master.c (/etc/postfix) http://lar3d.net/local.cf (/etc/spamassasin) http://lar3d.net/maildroprc (maildroprc) If I change master.cf line (as suggested here) maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/lib/courier/bin/maildrop -d ${recipient} with maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/lib/courier/bin/maildrop -d vmail ${recipient} I get the email in /home/vmail/MailDir instead of the correct dir (/home/vmail/foo.net/info/.SPAM ) After reading a lot I have some guess but not sure. - Maybe I have to install userdb? - Maybe is something related with mysql, but everything is working ok - If I try with procmail I will face same problem... - What are flags DRhu for? Couldnt find doc about them - In some places I found maildrop line with more parameters flags=DRhu user=vmail argv=/usr/lib/courier/bin/maildrop -d $ ${recipient} ${extension} ${recipient} ${user} ${nexthop} ${sender} I am really lost. Dont know how to continue. If you have any idea or need another config file please let me know. Thanks!!!

    Read the article

  • DNS lookups failing somewhere between firewall and router

    - by TessellatingHeckler
    we have a setup of ADSL line - Cisco 837 ADSL router - Zyxel ZyWall 35 firewall/NAT - Switch == Intel load balanced NICS in a server. It has been fine for years, suddenly DNS resolution stopped working on the server. No changes that I know of, so I can't work backwards from there. It was configured with the ISP's DNS servers, neither network device does DNS relaying. Wireshark shows the request go out but nothing comes back. The server networking stack seems OK though, because if we query an internal DNS server on a remote site, that works. I can logon to the Cisco, and DNS resolves OK from the command line. I can logon to the ZyWall, and DNS does not resolve from the command line. So the problem seems to be the firewall, patch cable or router, yes? On the router: interface Ethernet0 ip address aaa.bbb.ccc.ddd 255.255.255.ddd ip tcp adjust-mss 1450 hold-queue 100 out On the firewall: DNS server set to 8.8.8.8 (Google's), DNS traffic allowed LAN-WAN. What else should I look for? Update: Following This guide I've got traffic logging on the Cisco. I have also got access to a public DNS server which I can run tcpdump on to see things from the other side. And as per the below comments, I've tested with Dig and see that DNS over TCP works, and over UDP does not. Currently: DNS request from the server using TCP shows up in the firewall log, and in the Cisco log, and in tcpdump on the DNS server, the answer comes back, it works fine. DNS request from the server using UDP shows up in the firewall log, and in the Cisco log, does NOT show in tcpdump on the DNS server, times out. DNS request from the cisco (using UDP) does show up in tcpdump on the DNS server, answer received, works fine. Ping requests from the server and the cisco to the DNS server show up in tcpdump on the DNS server. DNS request from the server using UDP does show up on the firewall. Summary: TCP seems fine throughought. UDP works over the ADSL and to the Cisco, and it works from the server to the Cisco, but it doesn't cross the Cisco properly, it seems. I did see the Cisco showing as connected at 10Mb/full-duplex internally, and the firewall showing as 100Mb/full-duplex externally. I have forced the firewall to 10Mb and rebooted both devices. That seemed to help get UDP traffic (server-firewall-cisco) instead of (server-firewall), but did not fix it. Update: Sanitized Cisco config: version 12.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname cisco ! logging queue-limit 100 enable secret 5 {password} enable password 7 {password} ! ip subnet-zero ip domain name example.org ip name-server {nameserver_IP} ! ! ip audit notify log ip audit po max-events 100 no ftp-server write-enable ! interface Ethernet0 ip address {Inside_public_IP} 255.255.255.248 ip tcp adjust-mss 1460 hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface Dialer1 ip unnumbered Ethernet0 encapsulation ppp dialer pool 1 dialer idle-timeout 0 dialer persistent no cdp enable ppp chap hostname {ADSL_Username} ppp chap password 7 {ADSL_Password} ! ip classless ip route 0.0.0.0 0.0.0.0 Dialer1 no ip http server no ip http secure-server ! access-list 23 permit {IP} dialer-list 1 protocol ip permit no cdp run snmp-server enable traps tty ! {con, vty} end

    Read the article

  • bind9 DNS Ubuntu names pingible on server, but not on Windows Machines?

    - by leeand00
    I setup a DNS server today on Ubuntu, following this tutorial. My intent was to setup my network for dns-name resolving on the private LAN within a single zone (nothing fancy I just want name resolution). I've tested the setup on the DNS server machine itself, and I can ping all the machines listed in the configuration file. I've also configured the Windows Machines on my network, and for some reason they are incapable of pinging by names as was possible on the DNS Server itself. I've tried running nslookup on the Windows DNS clients and I receive and error mentioning the address of the DNS server. DNS forwarding works fine, I'm not having any trouble accessing the internet, the problem only lies within accessing names within the private LAN. Here are my configuration files: options { directory "/var/cache/bind"; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { 8.8.8.8; 8.8.8.4; 74.242.0.12; //68.87.76.178; }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.options zone "leerdomain.local" { type master; file "/etc/bind/zones/leerdomain.local.db"; notify no; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.2.168.192.in-addr.arpa"; notify no; }; /etc/bind/named.conf.local Lookup: $TTL 3D @ IN SOA ns.leerdomain.local. admin.leerdomain.local. ( 2010011001 28800 3600 604800 38400 ); leerdomain.local. IN NS ns.leerdomain.local. ns IN A 192.168.2.9 asus IN A 192.168.2.254 www IN CNAME asus vaio IN A 192.168.2.253 iptouch IN A 192.168.2.252 toshiba IN A 192.168.2.251 gw IN A 192.168.2.1 TXT "Network Gateway" /etc/bind/zones/leerdomain.local.db (Validates fine with named-checkzone when validating zone leerdomain.local) Reverse Lookup: $TTL 3D @ IN SOA ns.leerdomain.local. admin.leerdomain.local. ( 201001101 28800 604800 604800 86400 ) IN NS ns.leerdomain.local. 1 IN PTR gw.leerdomain.local. 254 IN PTR asus.leerdomain.local. 253 IN PTR vaio.leerdomain.local. 252 IN PTR iptouch.leerdomain.local. 251 IN PTR toshiba.leerdomain.local. /etc/bind/zones/rev.2.168.192.in-addr.arpa *(Does not validate with named-checkzone when validating zone leerdomain.local gives an error of: zone leerdomain.local/IN: NS 'ns.leerdomain.local' has no address records (A or AAAA) zone leerdomain.local/IN: not loaded due to errors. * Despite not validating bind9 starts without errors in /var/log/syslog I've also configured a few of the windows machines on my network to have the static ip as specified in the lookup and reverse lookup config files. i.e. Using nslookup yields the following results: C:\Users\leeand00>nslookup ns Server: UnKnown Address: 192.168.2.9 *** UnKnown can't find ns: Non-existent domain C:\Users\leeand00>nslookup gw Server: UnKnown Address: 192.168.2.9 Name: gw. Additionally trying to ping by name also fails on machines that are not the DNS Server. Is there something wrong with my configuration of either the nameserver or the Windows Boxes that is keeping me from accessing other machines using names?

    Read the article

  • smartctl -t long isn't finishing

    - by xenoterracide
    I been running smartctl -t long on a drive for about 2 days now and it seems to be stalled at 10%. short and conveyance both passed. I have to send 1 of 2 drives purchased back I found badblocks with badblocks (none on this drive and I'ts made over a pass already). I'm just wondering if I should be concerned about this. smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: WDC WD10EARS-00Y5B1 Serial Number: WD-WMAV51582123 Firmware Version: 80.00A80 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon May 10 22:19:52 2010 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 241) Self-test routine in progress... 10% of test remaining. Total time to complete Offline data collection: (20100) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 231) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 2 3 Spin_Up_Time 0x0027 131 131 021 Pre-fail Always - 6408 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 12 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 148 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 10 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 7 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 174 194 Temperature_Celsius 0x0022 106 102 000 Old_age Always - 41 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Completed without error 00% 99 - # 2 Extended offline Interrupted (host reset) 10% 30 - # 3 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

    Read the article

  • Magento hosting on a budget

    - by spa
    I have to do a setup for Magento. My constraint is primarily ease of setup and fault tolerance/fail over. Furthermore costs are an issue. I have three identical physical servers to get the job done. Each server node has an i7 quad core, 16GB RAM, and 2x3TB HD in a software RAID 1 configuration. Each node runs Ubuntu 12.04. right now. I have an additional IP address which can be routed to any of these nodes. The Magento shop has max. 1000 products, 50% of it are bundle products. I would estimate that max. 100 users are active at once. This leads me to the conclusion, that performance is not top priority here. My first setup idea One node (lb) runs nginx as a load balancer. The additional IP is used with domain name and routed to this node by default. Nginx distributes the load equally to the other two nodes (shop1, shop2). Shop1 and shop2 are configured equally: each server runs Apache2 and MySQL. The Mysqls are configured with master/slave replication. My failover strategy: Lb fails = Route IP to shop1 (MySQL master), continue. Shop1 fails = Lb will handle that automatically, promote MySQL slave on shop2 to master, reconfigure Magento to use shop2 for writes, continue. Shop2 fails = Lb will handle that automatically, continue. Is this a sane strategy? Has anyone done a similar setup with Magento? My second setup idea Another way to do it would be to use drbd for storing the MySQL data files on shop1 and shop2. I understand that in this scenario only one node/MySQL instance can be active and the other is used as hot standby. So in case shop1 fails, I would start up MySQL on shop2, route the IP to shop2, and continue. I like that as the MySQL setup is easier and the nodes can be configured 99% identical. So in this case the load balancer becomes useless and I have a spare server. My third setup idea The third way might be master-master replication of MySQL databases. However, in my optinion this might be tricky, as Magento isn't build for this scenario (e.g. conflicting ids for new rows). I would not do that until I have heard of a working example. Could you give me an advice which route to follow? There seems not one "good" way to do it. E.g. I read blog posts which describe a MySQL master/slave setup for Magento, but elsewhere I read, that data might get duplicated when the slave lags behind the master (e.g. when an order is placed, a customer might get created twice). I'm kind of lost here.

    Read the article

  • Incorrect gzipping of http requests, can't find who's doing it

    - by Ned Batchelder
    We're seeing some very strange mangling of HTTP responses, and we can't figure out what is doing it. We have an app server handling JSON requests. Occasionally, the response is returned gzipped, but with incorrect headers that prevent the browser from interpreting it correctly. The problem is intermittent, and changes behavior over time. Yesterday morning it seemed to fail 50% of the time, and in fact, seemed tied to one of our two load-balanced servers. Later in the afternoon, it was failing only 20 times out of 1000, and didn't correlate with an app server. The two app servers are running Apache 2.2 with mod_wsgi and a Django app stack. They have identical Apache configs and source trees, and even identical packages installed on Red Hat. There's a hardware load balancer in front, I don't know the make or model. Akamai is also part of the food chain, though we removed Akamai and still had the problem. Here's a good request and response: * Connected to example.com (97.7.79.129) port 80 (#0) > POST /claim/ HTTP/1.1 > User-Agent: curl/7.19.7 (x86_64-pc-linux-gnu) libcurl/7.19.7 OpenSSL/0.9.8k zlib/1.2.3.3 libidn/1.15 > Host: example.com > Accept: */* > Referer: http://example.com/apps/ > Accept-Encoding: gzip,deflate > Content-Length: 29 > Content-Type: application/x-www-form-urlencoded > } [data not shown] < HTTP/1.1 200 OK < Server: Apache/2 < Content-Language: en-us < Content-Encoding: identity < Content-Length: 47 < Content-Type: application/x-javascript < Connection: keep-alive < Vary: Accept-Encoding < { [data not shown] * Connection #0 to host example.com left intact * Closing connection #0 {"msg": "", "status": "OK", "printer_name": ""} And here's a bad one: * Connected to example.com (97.7.79.129) port 80 (#0) > POST /claim/ HTTP/1.1 > User-Agent: curl/7.19.7 (x86_64-pc-linux-gnu) libcurl/7.19.7 OpenSSL/0.9.8k zlib/1.2.3.3 libidn/1.15 > Host: example.com > Accept: */* > Referer: http://example.com/apps/ > Accept-Encoding: gzip,deflate > Content-Length: 29 > Content-Type: application/x-www-form-urlencoded > } [data not shown] < HTTP/1.1 200 OK < Server: Apache/2 < Content-Language: en-us < Content-Encoding: identity < Content-Type: application/x-javascript < Content-Encoding: gzip < Content-Length: 59 < Connection: keep-alive < Vary: Accept-Encoding < X-N: S < { [data not shown] * Connection #0 to host example.com left intact * Closing connection #0 ?V?-NW?RPR?QP*.I,)-???A??????????T??Z? ??/ There are two things to notice about the bad response: It has two Content-Encoding headers, and the browsers seem to use the first. So they see an identity encoding header, and gzipped content, so they can't interpret the response. The bad response has an extra "X-N: S" header. Perhaps if I could find out what intermediary adds "X-N: S" headers to responses, I could track down the culprit...

    Read the article

  • Moved DNS and Email Hosting, Now Can't Send/Receive To/From Domains Hosted on Previous Host

    - by maxfinis
    Our company had 4 domains whose emails and DNS were hosted by one company, and then we moved the email and DNS hosting for 3 of the 4 domains to a new company. Now, the 3 domains that were moved can't send or receive emails to and from the one domain still left on the old server. All other email functions work fine for all 4 domains. There are no bouncebacks, error messages, or emails stuck in queue, and no evidence of these missing emails hitting the new servers. The new hosting company confirms that everything is fine on their end, and assures me that it's most likely an old zone file still remaining on the old nameserver, and so the emails sent from the old host is routed to what it believes is still the authoritative nameserver. Because the old zone file's MX records still contain the old resource, the requests never leave the old nameserver to go online to do a fresh search for the real (new) authoritative nameserver. The compounding problem is that the old company is rather inept and doesn't seem to have the technical expertise to identify the problem, much less fix it. (I know, I know.) Is the problem truly that this old zone file just needs to be deleted from the old company's nameserver? If so, what's the best way for me to describe this to them? If not, what do you think could be the issue? Any help is much appreciated. I'm not in IT, so all this is new to me. I know it seems weird for me (the client) to have to do this legwork, but I just want to get this resolved. Here's what I've done: Ran dig to verify that the old server's MX records still point to the old authoritative server, instead of going online to do a fresh search: ~$ dig @old.nameserver.com domainthatwasmoved.com mx ; << DiG 9.6.0-APPLE-P2 << @old.nameserver.com domainThatWasMoved.com mx ; (1 server found) ;; global options: +cmd ;; Got answer: ;; -HEADER<<- opcode: QUERY, status: NOERROR, id: 61227 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1 ;; QUESTION SECTION: ;domainthatwasmoved.com. IN MX ;; ANSWER SECTION: domainthatwasmoved.com. 3600 IN MX 10 mail.oldmailserver.com. ;; ADDITIONAL SECTION: mail.oldmailserver.com. 3600 IN A 65.198.191.5 ;; Query time: 29 msec ;; SERVER: 65.198.191.5#53(65.198.191.5) ;; WHEN: Sun Dec 26 16:59:22 2010 ;; MSG SIZE rcvd: 88 Ran dig to try to see where the new hosting company's servers look when emails are sent from the 3 domains that were moved, and got refused: ~$ dig @new.nameserver.net domainStillAtOldHost.com mx ; << DiG 9.6.0-APPLE-P2 << @new.nameserver.net domainStillAtOldHost.com mx ; (1 server found) ;; global options: +cmd ;; Got answer: ;; -HEADER<<- opcode: QUERY, status: REFUSED, id: 31599 ;; flags: qr rd; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; WARNING: recursion requested but not available ;; QUESTION SECTION: ;domainStillAtOldHost.com. IN MX ;; Query time: 31 msec ;; SERVER: 216.201.128.10#53(216.201.128.10) ;; WHEN: Sun Dec 26 17:00:14 2010 ;; MSG SIZE rcvd: 34

    Read the article

  • Having Hotlink Protectin problem in nginx

    - by Ayaz Malik
    Hello, i am having image hotlink protection problem in my nginx need help. i have a huge issue of my site's images being submited to social networks like stumbleupon with direct link ... xxxxx.jpg which some times get huge traffic and increases cpu usage plus bandwidth usage. what i am trying to do is block direct access to image from other refrers and hotlink protection. Here is the code from my vhost.conf server { access_log off; error_log logs/vhost-error_log warn; listen 80; server_name mydomain.com www.mydomain.com; # uncomment location below to make nginx serve static files instead of Apache # NOTE this will cause issues with bandwidth accounting as files wont be logged location ~* \.(gif|jpg|jpeg|png|wmv|avi|mpg|mpeg|mp4|htm|html|js|css)$ { root /home/username/public_html; expires 1d; } root /home/mydomain/public_html; } location / { client_max_body_size 10m; client_body_buffer_size 128k; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; # you can increase proxy_buffers here to suppress "an upstream response # is buffered to a temporary file" warning proxy_buffers 16 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; proxy_connect_timeout 30s; proxy_redirect http://www.mydomain.com:81 http://www.mydomain.com; proxy_redirect http://mydomain.com:81 http://mydomain.com; proxy_pass http://ip_address/; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; expires 24h; } } So for hotlink protection i added this code : location ~* (\.jpg|\.png|\.gif|\.jpeg)$ { valid_referers blocked www.mydomain.com mydomain.com; if ($invalid_referer) { return 403; } This is how the current nginx code for this domain looks like but didn't worked: server { access_log off; error_log logs/vhost-error_log warn; listen 80; server_name mydomain.com www.mydomain.com; # uncomment location below to make nginx serve static files instead of Apache # NOTE this will cause issues with bandwidth accounting as files wont be logged location ~* \.(gif|jpg|jpeg|png|wmv|avi|mpg|mpeg|mp4|htm|html|js|css)$ { root /home/username/public_html; expires 1d; } root /home/mydomain/public_html; } location ~* (\.jpg|\.png|\.gif|\.jpeg)$ { valid_referers blocked www.mydomain.com mydomain.com; if ($invalid_referer) { return 403; } location / { client_max_body_size 10m; client_body_buffer_size 128k; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; # you can increase proxy_buffers here to suppress "an upstream response # is buffered to a temporary file" warning proxy_buffers 16 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; proxy_connect_timeout 30s; proxy_redirect http://www.mydomain.com:81 http://www.mydomain.com; proxy_redirect http://mydomain.com:81 http://mydomain.com; proxy_pass http://ip_address/; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; expires 24h; } } Thank you in advance :) cheers

    Read the article

  • Performing mechanical movements using computer

    - by Vi
    How to make a computer (in particular, my laptop) to perform some mechanical movements without buying anything $5, soldering things inside computer or creating big sophisticated circuits? Traditionally CD-ROM tray is used to make computer do some movement IRL by, for example, SSH command, but in laptop tray is one-shot (unless manually reloaded) and also not very comfortable [mis]usage. Some assistance circuits can be in use too, but not complex. For example, there is a little motor that can work on USB power. Devices in my computer: DVD-ROM tray: one-time push. USB power: continuous power to the motor or LEDS or relay that turns on something powerful. Audio card. 3 outputs (modprobe alsa model=test can set Mic and Line-in as additional output). One controllable DC output (microphone) that can power up LED and some electronic (may be even mechanic?) relay. Also with sophisticated additional circuiting can control a lot of devices with a good precision. Both input and output support. Probably the most useful object in computer for radio ham. Modem. Don't know about this much, it doesn't work because of hsfmodem crashes kernel if memory is = 1GB. May be it's "pick up" and "hang up" can turn on and off power taken from USB port? Video card. VGA port? S-Video port? Will them be useful? Backlight. Tunable, but probably unuseful. CardBus (or some) slot. Nothing interesting for the task probably (is it?). AC adapter and battery. Probably nothing programmable here. /* My AC adapter already have additional jacks to connect extra devics */ Keyboard. No use. Touchpad. Good sensor (synclient -m 1), but no output. Various LEDs inside laptop. Probably too weak and requires soldering. Fans inside laptop. Poor control over them, requires soldering and dangerous to tinker. HDD (internal and external) that can be spin down and up (hdparm -Y, cat /dev/ubb). But connecting anything serially with it's power line makes HDD underpowered... And too complex. Is something are missed? Any ideas how to use described components? Any other ideas? May be there are easily available /* in developing countries */ cheap devices like "enhanced multimeters" that are controllable from computer and can provide configurable output and measure current and other things? Things to aid pushing many physical buttons with computer. Isn't this a simple idea and implementation and a lot of use in good hands?

    Read the article

  • Server Admin is not allowing me to configure DNS

    - by Clinton Blackmore
    We have a Mac OS X 10.5.8 Server running DNS (and a few other services). When I connect to it (using Server Admin 10.5.3 [which comes from the Server Admin 10.5.7 tools]), and click to look at the DNS settings, all appears normal -- it shows many reverse entries and two top-level domains. However, when I select one of our domains and open the disclosure triangle, the list is empty! [There should be over a dozen entries, and the reverse entries do show up.] If I then tell it I want to add, say, an A Record to the domain, almost everything disappears -- and I am left with a list showing our two domains, one with a disclosure triangle underneath it showing a single entry, and one reverse entry to correspond to the new A record. named appears to be working fine. DNS names resolve. It appears to simply be that Server Admin is having problems with the data on the computer. No one here would have manually created a DNS entry. Now, while I think I've backed up the DNS (I backed up /var/named/, /etc/named.conf, and /etc/dns/, as mentioned here), I'm really not sure if just replacing the files would restore the DNS settings we have if things go south. I am contemplating going to settings and changing the log level from "Information" to "Debug", but 1) I am just a little concerned that it might write a bad configuration to the disk, and 2) I think it would only affect named and not Server Admin, and, so far as I can tell, named is not having a problem. (Nothing looks strange in /Library/Logs/named.log when I open it via Console/Terminal. Oddly, though, when I click on the 'log' button for DNS in Server Admin, I see no text at all, just a fully white window. When I look at one of our secondary DNS servers, I am able to see the log file through Server Admin.) This entry appears in the system log when I run Server Admin on the server: Jun 17 09:02:08 od1 Server Admin[3892]: Unexpected call to doMarkConfigurationAsDirty by 'DNS' plugin during updateConfigurationViewFromDescription It seems to occur after I've looked at DNS, look at another service, and then click back on DNS. Think that the most likely cause is a corrupt configuration file, I glanced through all the files that I backed up, and none of them is obviously gobbledygook. Here are some oddities I find when running Server Admin from a remote computer to manage the DNS. When I click to see the log file for DNS, the server starts writing messages like these to its system.log: Jun 17 09:59:04 od1 kernel[0]: Limiting open port RST response from 252 to 250 packets per second Jun 17 09:59:06 od1 kernel[0]: Limiting open port RST response from 258 to 250 packets per second This stops when I click on a different service. The inderterminate progress indicator (the spinning wheel that appears beside the "Revert" and "Save" buttons in the bottom-right corner of Server Admin) looks really strange. As far as I can tell, instead of just spinning and waiting, it is being told to start spinning repeatedly, resulting in a jerky animation. Here are some of the messages being logged on the computer running Server Admin: At startup: *** ERROR: -[GRAxes computeLayout]:1124 - plotRect height = 0.000000 <= 0.0 *** *** ERROR: -[GRChartView computeLayout]:1194 - Layout for overlay axes (0x18758f50) failed. *** (These messages don't concern me too much as they go away for a while if you delete ~/Library/Preferences/com.apple.ServerAdmin.plist). At shutdown: 2010-06-17 10:02:17.202 Server Admin[7770:10b] *** -[GroupTextField windowDidResignKey:]: unrecognized selector sent to instance 0x16e12490 More concerning are these messages: 2010-06-17 09:59:47.269 Server Admin[7770:10b] Unexpected call to doMarkConfigurationAsDirty by 'DNS' plugin during updateConfigurationViewFromDescription Server Admin(7770,0xb0453000) malloc: *** error for object 0x1c115390: double free *** set a breakpoint in malloc_error_break to debug 2010-06-17 10:01:00.795 Server Admin[7770:10b] *** -[ServiceEntry sessionHost]: unrecognized selector sent to instance 0x2af500 Any thoughts on: what the problem is how I can troubleshoot it or how to fix it? If I do need to wipe out DNS and restart, is there a good way to do this?

    Read the article

  • Centos/OVH: public IP on KVM virtual machine

    - by Sébastien
    Since a few days, I'm trying to configure my KVM vm to have a public IP address, without any success. First, I'm on OVH, and you need to know they don't allow networking from different mac addresses. I have so registered a virtual mac address associated with my failover IP Here's my configuration: Guest wanted IP: 46.105.40.x Host IP: 176.31.240.x Host configuration dummy0 interface: ifcfg-dummy0 BOOTPROTO=static IPADDR=10.0.0.1 NETMASK=255.0.0.0 ONBOOT=yes NM_CONTROLLED=no ARP=yes BRIDGE=br0 br0 bridge: ifcfg-br0 DEVICE=br0 TYPE=Bridge DELAY=0 ONBOOT=yes BOOTPROTO=static IPADDR=192.168.1.1 NETMASK=255.255.255.0 PEERDNS=yes NM_CONTROLLED=no ARP=yes Failover ip is redirected to the br0 bridge with ip route add 46.105.40.xxx dev br0 > cat /proc/sys/net/ipv4/ip_forward 1 > cat /proc/sys/net/ipv4/conf/vnet0/proxy_arp 1 > route -n Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 176.31.240.254 0.0.0.0 UG 0 0 0 eth0 46.105.40.x 0.0.0.0 255.255.255.255 UH 0 0 0 br0 176.31.240.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 Guest configuration: KVM: <interface type='bridge'> <mac address='02:00:00:30:22:05'/> <source bridge='br0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </interface> I've borrowed most of the OVH configuration here (in french, http://guides.ovh.com/BridgeClient) for the guest configuration eth0 interface: ifcfg-eth0 DEVICE="eth0" BOOTPROTO=none HWADDR="02:00:00:30:22:05" NM_CONTROLLED="yes" ONBOOT="yes" TYPE="Ethernet" UUID="e9138469-0d81-4ee6-b5ab-de0d7d17d1c8" USERCTL=no PEERDNS=yes IPADDR=46.105.40.xxx NETMASK=255.255.255.255 GATEWAY=176.31.240.254 ARP=yes For the routes, I have in route-eth0: 176.31.240.254 dev eth0 default via 176.31.240.254 dev eth0 With this configuration, I don't have any access to the internet. The only thing I can do is to ping the public ip of the host, nothing more. My final conclusion is that the route does not work, because, when, on the guest, I run ping 8.8.8.8, I have, on the host: > tcpdump -i vnet0 icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on br0, link-type EN10MB (Ethernet), capture size 65535 bytes 13:38:09.009324 IP 46-105-40-xxx.kimsufi.com > google-public-dns-a.google.com: ICMP echo request, id 50183, seq 1, length 64 13:38:09.815344 IP 46-105-40-xxx.kimsufi.com > google-public-dns-a.google.com: ICMP echo request, id 50183, seq 2, length 64 I never get the ping reply, only the request. It seems Guest - Host communication is fine. On eth0: > tcpdump -i eth0 icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 13:39:40.240561 IP 46-105-40-xxx.kimsufi.com > google-public-dns-a.google.com: ICMP echo request, id 50439, seq 1, length 64 13:39:40.250161 IP google-public-dns-a.google.com > 46-105-40-xxx.kimsufi.com: ICMP echo reply, id 50439, seq 1, length 64 I have the request and the reply on eth0, but reply is not forwarded to the bridge. I really don't understand why, I though it was the aim of the route to do that! IPtables is disabled on both host and guest. I really hope some of you will be able to help me! Many thanks in advance, Sébastien

    Read the article

  • Bizarre and very specific Internet connection loss

    - by Synetech
    Yesterday (Friday, September 21, 2012), my Internet connection started acting up. After some testing, I confirmed a very specific and baffling set of symptoms: Internet connection goes away every 25-35 minutes (I did not confirm the exact interval, but it seems to be about 30 mins.) Only some protocols are affected; HTTP*, P2P, etc. stop working; FTP, etc. continue to work When it’s stopped, cannot even ping router or cable-modem IPs or view their firmware pages Domain-names and IPs are irrelevant (for protocols that stop working, neither work, for those that still work, both work) Resetting router fixes it for another 30 minutes Keeping the connection idle or active doesn’t seem to make a difference (nor the bandwidth usage in that period) Connecting directly to cable-modem allows it to work indefinitely Disconnecting the router from the cable-modem works indefinitely (no Internet connection obviously, but can still access router IP and firmware page) Connecting the router to the cable-modem, but putting the modem on standby also works indefinitely Same problem with both a wireless laptop and wired (on any port) desktop (both Windows 7; will try to test Windows XP when possible) Nothing had changed in the days leading up to the issue. No modifications to the networking configuration or the router; there were not even any Windows updates except for an MSSE definition update. Waiting does not fix it, nor does any amount of fiddling with anything; only resetting the router fixes it for 30 minutes (resetting the cable-modem doesn't work either) I tried cleaning the pins in the router’s plugs, but that didn’t help, which was not really a surprise since I was not getting a lost connection error. Obviously my first thought was that the router was having a problem, and this is borne out by some tests. The problem is that when it drops, it is not a full drop since I can still do things like ftp ftp.mcafee.com and such which means that the connection and DNS are still working. Moreover, if it were the router, then why does it stay alive indefinitely when not connected to the cable-modem (i.e., no outside influence)? The problem doesn't seem to be either the cable-modem nor the router, but rather an interaction between the two, like something from the outside (port scan? hacker? ISP?) that is triggering a problem in the router. I see that there have been a couple of vulnerabilities for the DI-524, but those were a while back and should be fixed since I have the last firmware for it. I don’t think it’s my ISP (Rogers) since I have been using the router for several years without problem and can connect indefinitely when bypassing it. But I can’t rule them out since that is one of the only possible things that could have suddenly changed. Does anybody have any ideas of explanations, fixed, or tests? (I note that when I opened the router, I heard a very high-pitched noise from somewhere near the capacitors/ferrite ring which I don’t think I heard the last time I opened it a few years ago, but then if it were that, then why would it affect only a very small, specific set of functions?)

    Read the article

  • How to set up a centralized backup server with lots of offsite workstations, intermittent internet connectivity, and stubborn users?

    - by Zac B
    This might be an impossible question. Context: We have a bunch of computers across around 1000 users. We have a centralized office where 900 of the users work, most of the time. Most of the computers are laptops. They are very frequently coming on and off the network for hours at a time. Users often take their computers home and do lots of work from home. In addition, there are a handful of users who work elsewhere in the country, who are offline (no internet connection whatsoever) for more than half of the time they use their machines. All of the machines are Windows 7/XP. Problem: People are always losing data. One day someone accidentally deletes a bunch of files. The next day someone else installs a bad driver or tries to mess with something in system32 and needs a personal data backup/reinstall of Windows. Because of how many of our business operations are done without an internet connection, and how frequently computers come on- and offline, it's unfeasible to make users use network storage for all of their data. We tried giving them Dropboxes, and they stored their files elsewhere. We bought and deployed Altiris, and they uninstalled it and blamed us when they couldn't get files back that they accidentally deleted while they were offline and hadn't taken a backup in months. We tried teaching them backup best-practices, and using scheduled sync tools to upload things to the network drives, and they turned them off because they "looked like viruses". It doesn't help that many of these users are pretty high up in the business and are not amicable to any sort of "you need to do something regularly because we say so" solution. Question: Other than finding another job where IT is treated differently and users are willing to follow best practices, how would people recommend I implement a file backup solution that supports the following: Backs up to a centralized server over LAN or WAN whenever a network link becomes available, or on a schedule. Supports interrupted/resumed backups (and hopefully file-delta only backups), since connections to the network (WAN or LAN) are often slow and only open for half an hour or so. Supports relatively rapid, "I accidentally deleted the TPS reports! Oh no!" single-file recovery, ideally administered from the central backup server rather than the client PC. Supports local-to-local file delta backup on a schedule, so that users without a network connection for a few days can still retrieve accidental deletions or whatnot. Ideally, the local stored backups would be pushed up to the server whenever network link is available. Isn't configurable on the clients without certain credentials. Because the CFOs (who won't give up their admin rights on the domain) will disable it if they can. Backs up the entire hard drive. There are people who are self-righteous about storing things in C:\, or in the recycle bin, or in the C:\Windows dir (yes, I know). I'm fine integrating multiple products/solutions, or scripting different programs together myself (I'm a somewhat competent programmer), but I've been drawing a blank on where to start. Dropbox is folder-specific, Altiris doesn't cope with LAN outages or interrupted/resumed backups, Volume Shadow Copy is awesome for a local-to-local solution, but I don't know how to push days of stored shadow copies up to a server in a 2 hour window of network access. The company is fine with spending decent money on this, thousands (USD) on a server, and hundreds on clients, if necessary. I want to emphasize that this isn't a shopping list request. While I wish there was a program out there that did what I want, I've looked pretty hard, and not found anything that fits the bill. Instead, I'm hoping for ideas on where to start hacking things together from scratch/from different technologies to make something stable that works. Cheers!

    Read the article

  • Configuring Wireless on Cisco 851W

    - by Aequitarum Custos
    Either a powersurge or something caused our router's configuration to get wiped, and our last backup was before the wireless network was setup. We have not been able to reconfigure the wireless since then, so was curious if anyone here would be able to determine what configuration is needed. We are using a Cisco 851W running 12.4(15)T9 We would like to use WPA encryption, and have it on the same network as the rest of the office network. Config file is below: User Access Verification Building configuration... Current configuration : 3857 bytes ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption no service dhcp ! hostname BOB ! boot-start-marker boot-end-marker ! enable secret 5 ********************* ! no aaa new-model ! ! dot11 syslog no ip source-route ! ! ip cef no ip bootp server ip domain name BOB.com ip name-server 61.11.1.1 ip name-server 61.11.1.2 ! ! ! username BOBB privilege 15 password 7 ************************* ! ! archive log config hidekeys ! ! ip tcp synwait-time 10 ! ! ! interface FastEthernet0 no cdp enable ! interface FastEthernet1 no cdp enable ! interface FastEthernet2 no cdp enable ! interface FastEthernet3 no cdp enable ! interface FastEthernet4 description WAN Connection$ETH-WAN$ ip address 61.11.1.14 255.255.254.0 ip nat outside ip virtual-reassembly duplex auto speed auto no cdp enable ! interface Dot11Radio0 no ip address shutdown ! encryption mode ciphers tkip speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root no cdp enable ! interface Dot11Radio0.1 encapsulation dot1Q 1 native no cdp enable bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 spanning-disabled bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding ! interface Dot11Radio0.20 ip access-group Guest-ACL in no cdp enable ! interface Vlan1 description Internal Network ip address 192.168.2.60 255.255.255.0 ip nat inside ip nat enable ip virtual-reassembly ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 61.11.2.14 ! ip http server no ip http secure-server ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended Guest-ACL deny ip any 192.0.0.0 0.0.0.255 permit ip any any ! access-list 1 permit 192.0.0.0 0.0.0.255 access-list 100 remark SDM_ACL Category=2 access-list 100 permit ip 192.0.0.0 0.0.0.255 any no cdp run ! control-plane ! !

    Read the article

  • SQLExpress service unable to start Error code 17053

    - by Chris Sobolewski
    A user was instructed by their software support to upgrade a program and install SQLExpress as part of the installation process. Since that time, the service has been able to start, citing error 17053, which appears to be an authentication issue. Here is the error log: 2011-01-11 13:17:45.50 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2) 2011-01-11 13:17:45.50 Server (c) 2005 Microsoft Corporation. 2011-01-11 13:17:45.50 Server All rights reserved. 2011-01-11 13:17:45.50 Server Server process ID is 3332. 2011-01-11 13:17:45.50 Server Authentication mode is WINDOWS-ONLY. 2011-01-11 13:17:45.50 Server Logging SQL Server messages in file 'c:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'. 2011-01-11 13:17:45.52 Server This instance of SQL Server last reported using a process ID of 2332 at 11/10/2010 2:15:24 PM (local) 11/10/2010 7:15:24 PM (UTC). This is an informational message only; no user action is required. 2011-01-11 13:17:45.52 Server Error: 17053, Severity: 16, State: 1. 2011-01-11 13:17:45.52 Server UpdateUptimeRegKey: Operating system error 5(Access is denied.) encountered. 2011-01-11 13:17:45.52 Server Registry startup parameters: 2011-01-11 13:17:45.52 Server -d c:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf 2011-01-11 13:17:45.52 Server -e c:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG 2011-01-11 13:17:45.52 Server -l c:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\mastlog.ldf 2011-01-11 13:17:45.52 Server Error: 17113, Severity: 16, State: 1. 2011-01-11 13:17:45.52 Server Error 3(The system cannot find the path specified.) occurred while opening file 'c:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf' to obtain configuration information at startup. An invalid startup option might have caused the error. Verify your startup options, and correct or remove them if necessary. 2011-01-11 13:17:45.52 Server Error: 17053, Severity: 16, State: 1. 2011-01-11 13:17:45.52 Server UpdateUptimeRegKey: Operating system error 5(Access is denied.) encountered. 4 Server Error: 17053, Severity: 16, State: 1. 2011-01-11 13:08:21.34 Server UpdateUptimeRegKey: Operating system error 5(Access is denied.) encountered. 12:47:20.85 spid5s SQL Trace ID 1 was started by login "sa". 2011-01-11 12:47:20.90 spid5s Starting up database 'mssqlsystemresource'. 2011-01-11 12:47:20.93 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required. 2011-01-11 12:47:21.21 spid5s Error: 15466, Severity: 16, State: 1. 2011-01-11 12:47:21.21 spid5s An error occurred during decryption. 2011-01-11 12:47:21.38 spid8s Starting up database 'model'. 2011-01-11 12:47:21.38 Server Error: 17182, Severity: 16, State: 1. 2011-01-11 12:47:21.38 Server TDSSNIClient initialization failed with error 0x5, status code 0x90. 2011-01-11 12:47:21.38 Server Error: 17182, Severity: 16, State: 1. 2011-01-11 12:47:21.38 Server TDSSNIClient initialization failed with error 0x5, status code 0x1. 2011-01-11 12:47:21.38 Server Error: 17826, Severity: 18, State: 3. 2011-01-11 12:47:21.38 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log. 2011-01-11 12:47:21.38 Server Error: 17120, Severity: 16, State: 1. 2011-01-11 12:47:21.38 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems. One lead I had was to change the SQL logon account from "Network Service" to "Local System". Unfortunately, that is resulting in the error message The Security ID Structure is Invalid [0x80070539] Any help either uninstalling or getting SQLExpress running would be fantastic.

    Read the article

  • Local DNS server (bind) and the router DHCP

    - by Luca
    I just set up an internal http server for internal use (I set up Redmine), in a small network (30 or so PCs). I set up the http server on a virtual box ubuntu, that runs also the DNS server (bind). In the DNS lookup I added the Redmine server name (redmine.engserver <- 192.168.1.14) and as forwarders the outside ISP DNS IP adresses. I am using a small wi-fi router (ASUS RT-N66U) as DHCP (and as gateway). In the DHCP config page I set up as DNS the ubuntu server IP (it is fixed 192.168.1.14). Now when I connect a new PC to the network, the DHCP router issues its new IP and as DNS servers it issues: primary: 192.168.1.14 (ubuntu machine) and seconary 192.168.1.1 (the router itself). ipconfig /all Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DHCPv6 IAID . . . . . . . . . . . : 248539109 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-15-AA-3F-D0-67-E5-49-A7-EF DNS Servers . . . . . . . . . . . : 192.168.1.14 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Before changing the DHCP setting on the router, I would always get only one DNS server: 192.168.1.1 (which uses probably DNS forwarding to external public DNS services). The problem is this: If in my browser I type www.google.com, it works all the time. If in the browser I type http://redmine.engserver/ it works most of the time, but sometimes it ends up with a yahoo page search or something else. In the DNS cache it shows as (Server not found). ipconfig /displaydns I looked with wireshark and it seems like sometimes the client PC interrogates the secondary DNS (192.168.1.1) instead of the first 192.168.1.14. Obviously this one is a public domain and it does not have the redmine.engserver entry. What is wrong in this configuration? Is it even legitimate to have 2 DNS (one internal and one forwarded by the router) which are inconsistent? Is there another way to have a local name service in a small office network? Why is the router DHCP issuing itself as DNS?

    Read the article

  • Routing not working correctly using the laravel framework

    - by samayres1992
    I'm using the book wrote by one of the guys that created laravel, so I'd like to think for the most part this code isn't horribly wrong. My server is setup with nginx serving all static files and apache2 serving php. My config for each are the following: apache2: <VirtualHost *> # Host that will serve this project. ServerName litl.it # The location of our projects public directory. DocumentRoot /var/www/litl.it/laravel/public # Useful logs for debug. CustomLog /var/log/apache.access.log common ErrorLog /var/log/apache.error.log # Rewrites for pretty URLs, better not to rely on .htaccess. <Directory /var/www/litl.it/laravel/public> <IfModule mod_rewrite.c> Options -MultiViews RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^ index.php [L] </IfModule> </Directory> nginx: server { # Port that the web server will listen on. listen 80; # Host that will serve this project. server_name litl.it *.litl.it; # Useful logs for debug. access_log /var/log/nginx.access.log; error_log /var/log/nginx.error.log; rewrite_log on; # The location of our projects public directory. root /var/www/litl.it/laravel/public; # Point index to the Laravel front controller. index index.php; location / { # URLs to attempt, including pretty ones. try_files $uri $uri/ /index.php?$query_string; } # Remove trailing slash to please routing system. if (!-d $request_filename) { rewrite ^/(.+)/$ /$1 permanent; } # PHP FPM configuration. location ~* \.php$ { proxy_pass http://127.0.0.1:8080; include /etc/nginx/proxy_params; try_files index index.php $uri =404; include /etc/nginx/fastcgi_params; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root/php/$fastcgi_script_name; } # We don't need .ht files with nginx. location ~ /\.ht { deny all; } location @proxy { proxy_pass http://127.0.0.1:8080; include /etc/nginx/proxy_params; } error_page 403 /error/403.html; error_page 404 /error/404.html; error_page 405 /error/405.html; error_page 500 501 502 503 504 /error/5xx.html; location ^~ /error/ { internal; root /var/www/litl.it/lavarel/public/error; } } I'm including these server configs, as I feel this maybe the issue? Here is my incredibly basic routing file that should return "routing is working" on domain.com/test but instead it just returns the homepage. <?php Route::get('/', function() { return View::make('hello'); }); Route::get('/test', function() { return "routing is working"; }); Any ideas where I'm going wrong, I'm following this tutorial very closely and I'm confused why there is issue. Thanks!

    Read the article

  • How can I work around problems with certificate configuration in Remote Desktop Services?

    - by Michael Steele
    I am setting up a Remote Desktop Services farm, and am having trouble configuring certificates for it to use. A demonstration of the problem I'm seeing can be found in Step #4. At this point I am convinced that there are problems with the user interface, and am looking for ways around them. Is there any way to configure certificates in Remote Desktop Services so that the settings hold and are reflected in the GUI? If not, is there any way for me to verify that the settings are correct? Step #1 - Create certificate to be used. I've configured a certificate to use with RD Web Access. The certificate is stored with in the Certificates MMC on my RD Connection Broker, and I am configuring the farm from that computer. I found by letting RD Web Access generate its own certificate that the following properties are required: Enhanced Key Usage Server Authentication Client Authentication This may not be required, but the self-signed certificate includes it. Key Usage Digital Signature Key Agreement Subject Alternative Name DNS Name=domain.com Detour about self-signed certificate generation As a quick detour, I was able to work around a problem with creating self-signed certificates using powershell. The documentation for the New-RDCertificate cmdlet gives the following example: PS C:\> $password = ConvertTo-SecureString -string "password" -asplaintext -force New-RDCertificate -Role RDWebAccess -DnsName "test-rdwa.contoso.com" -Password $password -ConnectionBroker rdcb.contoso.com -ExportPath "c:\test-rdwa.pfx" Typing this into the shell will result in an error message claiming that a function, Get-Server cannot be found. Prior to using New-RDCertificate, you must import the RemoteDesktop Module with Import-Module RemoteDesktop. Step #2 - Observe out-of-box behavior The first time you visit the Deployment Properties dialog box by navigating to Server Manager - Remote Desktop Services - Collections and selecting "Edit Deployment Properties" from the "TASKS" dropdown list in the "COLLECTIONS" grouping, you will see the following screen: This window is misleading because the level field is listed as "Not Configured". If I understand correctly all three of the role services are using a self-signed certificate. For the RD Web Access role this can be verified by visiting the website: The certificate being used also appears in the Certificates MMC: Step #3 - Assign new certificate The Deployment Properties dialog box will allow me to select my existing certificate. The certificate must be placed within the local computers Certificates MMC in the "Personal" certificate store. The private key will need to be exportable, and you will need to provide the password. I temporarily exported my certificate to a file named temp.pfx with a password, and then imported it into Remote Desktop Services from there. Once this is done the GUI will indicate that it is ready to accept the new configuration. Once I click the "Apply" button, the GUI indicates success. This can be verified by visiting the RD Web Access web site a second time. There is no certificate error. Step #4 - The GUI fails to maintain its state If the GUI is closed and reopened, all of these settings appear to be lost. Actually, the certificate I configured is still being used. I am able to continue accessing the RD Web Access site without any certificate errors. Oddly, if I use the "Create new certificate..." button to generate a self-signed certificate this window will update to an "Untrusted" level. This setting will then be maintained through the opening and closing of the Deployment Properties dialog box. Is there anything I can do to have my settings appear to stick? I feel like something is wrong when the GUI claims I haven't fully configured certificates.

    Read the article

< Previous Page | 965 966 967 968 969 970 971 972 973 974 975 976  | Next Page >