Search Results

Search found 23925 results on 957 pages for 'multiple render targets'.

Page 97/957 | < Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

  • How to Use 3 Monitors

    - by The.Anti.9
    Right now my setup has a nice big 24" flatscreen in the center, and a 19" flatscreen to the left. And a big gaping hole on the right. I have a 3rd monitor to put there, but I'm not sure how to get the computer to recognize it. Do I need a graphics card with 3 ports? Or can I span the monitors over non SLI-Linked graphics cards? Is it possible to plug my 3rd monitor into the on-board VGA port and have it work?

    Read the article

  • Linux Twinview : copy window application to both screens

    - by Dom
    I use the SUN Presenter Openoffice Extension with a twinview Ubuntu laptop. it works well : I have the video-projector with my presentation and my laptop screen with the slides (and time...). My problem is when I want to present a mono-screen application, like Firefox, gnome-terminal. It is displayed only on one monitor, which is not really efficient if you want to be interactive. Is there a way to display these types of application on both display and to interact with both ? Thanks

    Read the article

  • What's problem with multi monitor usage in rdc7?

    - by e-turhan
    Hello, I want to use dual monitors with remote desktop on windows 7 ultimate. Host machine is win server 2008 r2. I open the run window type mstsc /multimon and press enter, also "use all my monitors for the remote session" is checked.By this way RDC is opening but only in one monitor.Do I need to do any changes on host too? I have tried /span attribute and it worked but I don't want it.

    Read the article

  • Monitor occasionally doesn't display properly

    - by homestead
    Hi, I am using dual monitors, and this behavior has occured on 2 different computers (using the same monitors). When I turn the monitors off, and then on again after a while, 1 monitor turns on, displays the Dell logo etc. but doesn't display the windows login. It is just a blank page, and then the green light turns orange. Turning it on/off many times or just waiting a while eventually results in it working again, but I am very confused why!

    Read the article

  • Setting up httpd-vhosts.conf for multiple virtual hosts

    - by Chris Sobolewski
    I have a simple test setup using xampp at home, and I am getting really weird behavior when I attempt to set up multiple virtual hosts on this box. Here is my vhosts file: NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] ServerName foo DocumentRoot "D:\wamp\xampp\htdocs\foo" ErrorLog logs/foo-error_log CustomLog logs/foo-access_log common <Directory "D:\wamp\xampp\htdocs\foo"> Options Indexes FollowSymLinks Includes execCGI AllowOverride All Order Allow,Deny Allow From All </Directory> </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] ServerName bar DocumentRoot "D:\wamp\xampp\htdocs\bar" ErrorLog logs/bar-error_log CustomLog logs/bar-access_log common <Directory "D:\wamp\xampp\htdocs\bar"> Options Indexes FollowSymLinks Includes execCGI AllowOverride All Order Allow,Deny Allow From All </Directory> </VirtualHost> When I attempt to run visit the first site, it works as expected. When I attempt to run the second site, I get a weird hybrid mishmash of both sites. It's the weirdest thing.

    Read the article

  • LCD monitor reports incorrect maximum resolution

    - by SLaks
    I have four 20" Planar 2010M LCD monitors with a maximum resolution of 1600 x 1200 connected to two nVidia video cards (8600 GT and 7600 GS). I'm running Windows Server 2003 x86. Recently, two of the monitors have started mis-reporting their maximum resolution as 1280 x 1024. When this first happened, I used nVidia's Custom Resolutions feature to force the monitors back to 1600 x 1200. Yesterday, however, I upgraded nVidia's video card driver, and ever since, I cannot get the DVI one back to 1600 x 1200. When I add the custom resolution in nVidia's control panel, if I set either the width or the height to even a single pixel more than 1280 x 1024, nothing changes when I click Test (the monitor doesn't even flash black, although after 15 seconds, it flashes black and doesn't change). After adding Does anyone know what the problem is? Is there anything I can do about it?

    Read the article

  • Adding a CRT display to my HP Mini laptop

    - by Ritwik G
    I tried to add a CRT display to my HP Mini. Here are the details : This is where I thought the display plug must be inserted. This is what the plug looks like: (Please tell me what this thing is actually called. I am pretty sure it is not called a plug. lol) This is where the above plug usually goes into my desktop CPU : Details of my CPU monitor, which I am trying to connect : It did not work :( You can see it not working below: (Yes, the CRT Monitor was switched on) Can this ever work ? How to make this work ?

    Read the article

  • Configuring three monitors with two Radeon X1600/X1650 graphics cards under Ubuntu

    - by cpm
    I have three SyncMaster 932a monitors I want to use with two Radeon X1600/X1650 cards under Linux. I am running X.org X Server 1.6.0, as provided by Ubuntu's Wubi installer. After turning off mirroring, I ended up with this xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection The left monitor had a menu bar and a task bar, the center monitor was just desktop, and windows would maximize to the current monitor. The third monitor and second graphics card weren't being used at all. Then I changed my configuration to manually specify each card with their PCI bus: Section "ServerLayout" Identifier "TheLayout" Screen 0 "Radeon Screen 1" Screen 1 "Radeon Screen 2" RightOf "Radeon Screen 1" EndSection Section "Screen" Identifier "Radeon Screen 1" Monitor "Configured Monitor" Device "Radeon the First" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "Radeon Screen 2" Monitor "Configured Monitor" Device "Radeon the Second" EndSection Section "Device" Identifier "Radeon the First" Driver "radeon" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Radeon the Second" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Now both the left and right monitors have task bars and menu bars. Windows cannot be dragged from the first two monitors to the third monitor. Also, maximizing in the left or center window fills both monitors. I also tried adding Option "Xinerama" "true" to the ServerLayout section. X11 wasn't able to start up. I want to: Allow moving windows along all three monitors. Maximizing only fills the current monitor. Either have menu/task bars on only the left monitor or all three monitors How can I make this possible?

    Read the article

  • 3 Monitors 2 different graphic cards

    - by Michael
    I am looking to add a third monitor to my workstation. I currently have 2 monitors connected to a geforce gt 120. I am wanting to find the cheapest solution on adding another monitor, I have a old ati x300 laying around and wanting to know if I would be able to use that to power the other monitor and if it would conflict with my other graphic card (I am not a gamer). What I want to do is have the at x300 power 1 monitor via dvi and the gt 120 power 2 monitors via vga and dvi. Thanks edit: im running windows 7 64bit

    Read the article

  • Can two Identical devices be present on the same bus in any PCI Topology

    - by vaibbhav
    As per the PCI standard, devices are identified on the basis of Vendor Id, Device Id and the bus no. All devices of same type have identical vendor id and device id. If I put two such devices on the same bus say bus 0. How will the PCI Software Subsystem distinguish between the two? If such a case is not possible in PCI, then can such thing be possible through PCI Express Switch?

    Read the article

  • Utilize two gateways on the same network same interface with load balancing

    - by RushPL
    My setup is two ISPs on a single interface and single network. I can either set my default gateway to 192.168.0.1 or 192.168.1.250 and either work. My desire is to utilize both of them with some load balancing. I have tried to follow the advice given in here http://serverfault.com/a/96586 #!/bin/sh ip route show table main | grep -Ev '^default' \ | while read ROUTE ; do ip route add table ISP1 $ROUTE done ip route add default via 192.168.1.250 table ISP1 ip route add default via 192.168.0.1 table ISP2 iptables -t mangle -A PREROUTING -j CONNMARK --restore-mark iptables -t mangle -A PREROUTING -m mark ! --mark 0 -j ACCEPT iptables -t mangle -A PREROUTING -j MARK --set-mark 10 iptables -t mangle -A PREROUTING -m statistic --mode random --probability 0.5 -j MARK --set-mark 20 iptables -t mangle -A PREROUTING -j CONNMARK --save-mark Now then I do "traceroute somehost" repeatedly I can only get route through my default route which is 192.168.1.250. Shouldn't the packets change routes in a random manner? How to debug it?

    Read the article

  • uname -a gives wrong version of kernel in gentoo?

    - by freedrull
    Hi I'm running gentoo and doing uname -a gives the wrong kernel version. tony@P_P-o ~ $ uname -a Linux P_P-o 2.6.27-gentoo-r8 #12 SMP PREEMPT Sun Nov 8 19:46:59 PST 2009 i686 Genuine Intel(R) CPU T2060 @ 1.60GHz GenuineIntel GNU/Linux Running eix gentoo-sources shows that I have a later version than that installed: tony@P_P-o ~ $ eix gentoo-sources [U] sys-kernel/gentoo-sources Available versions: (2.6.16-r13) 2.6.16-r13!b!s (2.6.25-r9) 2.6.25-r9!b!s (2.6.26-r4) 2.6.26-r4!b!s (2.6.27-r8) 2.6.27-r8!b!s (2.6.27-r10) 2.6.27-r10!b!s (2.6.28-r5) 2.6.28-r5!b!s (2.6.28-r6) 2.6.28-r6!b!s (2.6.29-r5) 2.6.29-r5!b!s (2.6.29-r6) 2.6.29-r6!b!s (2.6.30) ~2.6.30!b!s (2.6.30-r3) ~2.6.30-r3!b!s (2.6.30-r4) 2.6.30-r4!b!s (2.6.30-r5) 2.6.30-r5!b!s (2.6.30-r6) 2.6.30-r6!b!s (2.6.30-r7) 2.6.30-r7!b!s (2.6.30-r8) 2.6.30-r8!b!s (2.6.31) ~2.6.31!b!s (2.6.31-r1) ~2.6.31-r1!b!s (2.6.31-r2) ~2.6.31-r2!b!s (2.6.31-r3) ~2.6.31-r3!b!s (2.6.31-r4) ~2.6.31-r4!b!s {build symlink ultra1} Installed versions: 2.6.27-r8(2.6.27-r8)!b!s(07:48:25 PM 06/19/2009)(-build -symlink) 2.6.28-r5(2.6.28-r5)!b!s(12:35:17 PM 06/08/2009)(-build -symlink) 2.6.29-r5(2.6.29-r5)!b!s(07:44:33 PM 06/19/2009)(-build -symlink) 2.6.30-r6(2.6.30-r6)!b!s(11:14:45 PM 10/02/2009)(-build -symlink) Homepage: http://dev.gentoo.org/~dsd/genpatches Description: Full sources including the Gentoo patchset for the 2.6 kernel tree What gives?

    Read the article

  • Moving a window from a disconnected monitor to connected monitor on Vista

    - by RickMeasham
    I have a laptop that runs Vista Mega Ultimate Amazing for Business 64-bit. When at work, I connect a monitor via USB (which totally rocks) to the "left" of the laptop monitor. It's identified as monitor 3. At home, I use an old CRT monitor that sits to the right of the laptop monitor. It's monitor 2. Monitor 1 is, of course, the inbuilt laptop monitor. Now at home I open a window, any window, on monitor 2. Then I come to work and plug in monitor 3. Anything I had open on monitor 2 is now stuck in unretrievable land. (Actually, it's probably anything that was minimised when I left home that belonged on monitor 2 will expand back onto monitor 2, even though it's disconnected) How can I get those windows back onto connected monitors?

    Read the article

  • Ubuntu Lucid: Erratic screen behaviour after boot

    - by fgysin
    In short: about 50% of the time I have a screwed up monitor setup after reboot. About 50% it is totally correct. Now the longer version: I updated my machine from 9.04 to 10.04 (via 9.10). At first I run into some monitor problems (I have a 3-monitor setup) because of the known bug in the new xserver driver for xinerama. This messes up behaviour if the mouse goes either left or above the screen number 0, i.e. I had to make my left-most monitor screen 0. Everything worked out fine finally, I got my 3-monitor setup back with xinerama enabled to get one big desktop streched over 3 screens. Now the fun part: Every time I start up my machine only one of the 3 monitors gets a signal and is woken up: it only recognizes the left-most monitor (screen 0) and crams all the desktop stuff into this one screen. If I go into nvidia settings I only see one physical device although all 3 are connected and have power. When I look into the xorg.conf I can still see my old setup with 3 devices, 3 screens, xinerama active etc... But I was totally unable to get 3 montitors to work. (I tried unplugging monitors, reconfiguring whole nvidia setup, ...) But it gets even better: When I restart my machine (i.e. choose the restart option from the Ubuntu menu) it shuts down and tries to restart. The restart then gets stuck after showing the Ubuntu splash screen with the 'loading bar' (the moving dots thingy) and I am forced to kill the machine by cutting power. But after the power cut the machine boots up normally and suddenly I get my 3 monitor setup back up working. That is until the next time I shut down and start up, where it all starts over again and I only have one monitor... (see above) I really have a hard time seeing where the error is. It must be that the restart boot somehow differs from the 'normal' boot. But the fact that it gets stuck and I need to cut power which then basically triggers a 'normal' boot does not really support this theory... My setup (please tell me if you need further info): 3 monitors as 3 screens as one desktop (with xinerama) 2 nvidia cards where screen 0 and 1 are on card 0 and screen 2 is on card 1 Ubuntu 10.04 Lucid Lynx (updated from 9.10, 9.04, ....) I would appreciate every idea on the subject, at the moment I really don't have any clue what to do...

    Read the article

  • Switch monitor configurations on Windows 7

    - by Horst Walter
    I use one of my PCs for flight simulation as well as for home theater. In case one it has 2 monitors attached, and in case 2 (home theater) a HD TV is being used. All 3 monitors are attached at the same time to the graphics card. How could it best switch best between different configurations. In case 1 I'd like to have the configuration with monitor 1/2, alternatively I'd like quickly to switch to another config only with the HD TV as primary screen. A similar question has been asked 6 months back with no full solution yet, so I come up with it again. The comment there of Darius (Windows + P key) is the best so far.

    Read the article

  • FTP client that supports 2 concurrent FTP sessions

    - by oninea
    I'm looking for an FTP client that can connect to two different FTP servers at the same time and allow file transfer or synchronization between those two servers. Basically what I want to achieve is to transfer/synchronize files between 2 different sites from my local machine. Are there any clients around that support this functionality? If there are none, is there an alternative to achieve this? I've taken a look at net2ftp, a web based FTP client, which provides almost the same functionality that I need. What I'm looking for though is a desktop app. Any ideas?

    Read the article

  • Daisy-chainable DisplayPort Monitors

    - by thepurplepixel
    I am the proud new owner of a MacBook Pro with a mini-DisplayPort. My desk setup used to allow me to position the screen of my old MacBook beside an external monitor, essentially allowing dual-head. It was also advantageous that my old MBP and my external monitor had the same resolution, 1440x900. Now, I'm searching for a set of two monitors that I can use a HengeDock with. Unfortunately, the MacBook Pro suffers from having only one mini-DisplayPort. Looking up the spec for DisplayPort 1.2 (which the MBP supports), DisplayPort daisy chaining is supported. What I'm looking for is a monitor that has two DisplayPorts so I can daisy chain two monitors off the single mini-DisplayPort. What I don't want is a USB-based video solution. I need full acceleration on both monitors; an external video card won't cut it. I hope I don't have to wait a few years for these monitors to come out. TL;DR: I need two monitors with two DisplayPorts each that I can daisy-chain. Thanks!

    Read the article

  • 3 monitors, 2 X screens, Twinview not working as expected

    - by mononym
    Hi Guys, I have 3 monitors on 2 graphics cards (both nvidia) to get all 3 working i set 2 as twinview and one to have its own x screen. but when i do this, the twinview screens (which previously worked like 2 seperate screens) now work as one, ie a maximised window is across both screens How can i get the twinview to work as 2 seperate screens again?

    Read the article

  • ATI Radeon 5850 I cant seem to get 3 monitors up at the same time. 2 Monitors and a HDTV but still.

    - by Jan
    Ive just bought the top end ATI Radeon card with 2 normal monitor ports and a HDMI. The idea was to continue using my dual screen setup as always and to use the last plug, the HDMI on my TV. I got a new 52 inch HD TV with all the necessary bits. This should work fine. But.. in Display Properties I still get only my 2 monitors up as options. Not the Digital TV. When I unplug 1 monitor and restart the computer, I get the TV and the other monitor. But never all 3 at the same time. Why is this ? Where can I go to tell it that I need all 3 screens at the same time. Also I get a message saying my gfx card also gives sound through the HDMI cable.. But the TV tells me its recieving a sound format that it does not understand. Any ideas on that too while were at it ?

    Read the article

  • Dell Latitude E6420 dual-boot Ubuntu + Windows 7 Optimus graphics problems

    - by Ryan
    I have a Dell Latitude E6420 laptop with Ubuntu 12.04 alongside Windows 7 (dual-boot) docked in a docking station with 2 DVI outputs. It took me a week of tinkering to get the dual external monitors to work in Ubuntu, and I had to disabled the "Optimus" feature in the BIOS. But now neither external monitor is detected in Windows, and the resolution is also very low. Do you know how I can successfully dual-boot Windows 7 and Ubuntu on this machine using my 2 external DVI monitors? I have an open question here too, trying to resolve this same issue: http://askubuntu.com/questions/146933/dock-with-dual-external-dvi-monitors-with-intel-nvidia-optimus

    Read the article

  • Can I animate render targets or the swap chain?

    - by Eric F.
    I want to animate some synthetic video bits to fullscreen w/o tearing. Can I set up D3D 9/10/11 in exclusive mode, and have it present a series of buffers that I'm writing to? I know how to copy system memory bits into a texture, then draw that texture as a fullscreen quad, but it seems like overkill. Why should I use the triangle rasterizer when I want to do something so simple? All I want to do is set up a long (4-8 buffer) swapchain and set the bits of the back buffer that is about to be displayed. Or, I want to allocate 4-8 RenderTargets, and on each frame, copy the bits from system memory to the RenderTarget, then set it as the next thing to display. I've never seen or heard about anybody doing this, but it seems so dead simple!

    Read the article

  • One server with multiple desktops "heads" with VNC

    - by Alexis K
    I am managing a system of kiosks. Each kiosk currently is running a web browser with the application for the kiosk running in the browser. Each kiosk needs to be able to display separate content. At times, the application running in the web browser freezes. Thus, I have to go out to the site to refresh the page. I want to see if there is a way to have one central server that has multiple browser heads. Then each kiosk would run a program like VNC to display one of the heads. This way when the program freezes, I just have to login to the central server and refresh the page. Getting VNC or another remote desktop software installed on the clients is no problem. What I am looking for is a way to have VNC remote into a specific head of a head of a web browser. Does such a thing exist? Or do I have to run a VM for each kiosk to remote into? Any advice, pointers, or solutions would be helpful.

    Read the article

  • How to quickly switch monitors on multi-monitor setup? (W7)

    - by Saxtus
    At my desktop PC, I have 3 displays hooked up on my Palit GeForce GTX 480 to extend my desktop: DVI: Samsung SyncMaster T220 (22" 16:10, 1680x1050, as my main) DVI: Samsung SyncMaster 940BF (19" 4:3, 1280x1024) HDMI: Sony Bravia KDL-32D3000 (32" 16:9, 1360x768) As expected, the GFX card can only utilize 2 of the displays at any given time, so I have to manually switch using Windows' "Display Properties" dialog, each time I want to switch between them. I've tried UltraMon, DisplayFusion and PowerStrip (so please don't refer me to a question where those are given as solutions) but they are unable to switch monitors. Instead they can only change display resolutions and settings on the existing active monitors, with specially weird results when I've saved the monitor states and then tried to switch monitors using the saved states! Any idea on how to bypass the awful "Display Properties" dialog and it's "confirm your change" timer? Thanks in advance.

    Read the article

  • Use xrandr to set the absolute position of the screen?

    - by Eli
    I am running XFCE on Fedora 15. I use xrandr to set the secondary display (HDMI-0) to be to the right of the primary (DVI-0), however it is always at the top-right. Is it possible to set the absolute position of the display (e.g. DVI-0 at 0,0 and HDMI-0 at 1920,56), or even set the display to be at the bottom-right? I cannot modify the Xorg.conf, which would be the easy way, as that would mean generating an Xorg.conf file (there is none right now), and I do not know of any automated tool to do that (other than the fglrx driver). The reason why I need this is because I want to extend the XFCE panel accross both monitors, but with there being a 56-pixel-wide dead zone at the bottom I cannot do this.

    Read the article

< Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >