Search Results

Search found 25518 results on 1021 pages for 'iterative development'.

Page 975/1021 | < Previous Page | 971 972 973 974 975 976 977 978 979 980 981 982  | Next Page >

  • nginx - Redirect specific page paths to https while keeping everything else on http (in a single server call)?

    - by Kris Anderson
    From what I've gathered so far it's clear that running if statements in nginx should be avoided at all costs. Most of the examples I've found so far regarding specific page redirects involve multiple servers being used. But, isn't that a bit wasteful? I'm not sure, but I would think multiple servers to accomplish this would be somewhat slower then a single server when under heavy load. My current server call is this: server { listen 10.0.0.60:80; listen 10.0.0.60:443 default ssl; #other code } What I want to do is redirect certain http requests to https requests. For example, I want /login/ and /my-account/ to always be forced to use SSL. If you're on /help/ though, I want that served over the default http. Is there a way to accomplish this within a single server call? Or is there no downside to using 2 server calls to get this working? nginx seems to be under pretty active development and a lot of the older guides I've followed were from times when you couldn't listen to requests for port 80 and 443 within the same server call. But now that nginx has been updated to support that (I'm running 1.2.4), I'm wondering if there's a "best practice" way of handling this today. Any help would be greatly appreciated. EDIT: I did find this guide: http://redant.com.au/blog/manage-ssl-redirection-in-nginx-using-maps-and-save-the-universe/ and I updated my code as follows: map $uri $my_preferred_proto { default "http"; ~^/#/user/login "https"; } server { listen 10.0.0.60:80; ## listen for ipv4; this line is default and implied listen 10.0.0.60:443 default ssl; if ($my_preferred_proto = "none") { set $my_preferred_proto $scheme; } if ($my_preferred_proto != $scheme) { return 301 $my_preferred_proto://mysite.com$request_uri; } It's not working though. When I change the default to https everything is redirected to SSL so it does somewhat work. But the redirect of /#/user/login is not redirecting to HTTPS. Any ideas? Also, is this a good way to go about this?

    Read the article

  • Trying to setup postfix

    - by Frexuz
    I used this guide: http://jonsview.com/how-to-setup-email-services-on-ubuntu-using-postfix-tlssasl-and-dovecot telnet localhost 25 says 220 episodecalendar.com ESMTP Postfix (Ubuntu) ehlo localhost 250-episodecalendar.com 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH LOGIN PLAIN 250-AUTH=LOGIN PLAIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN Installation seems fine? /var/log/mail.log says Nov 26 14:04:06 ubuntu postfix/pickup[12107]: A742E2B9E1: uid=0 from=<root> Nov 26 14:04:06 ubuntu postfix/cleanup[12114]: A742E2B9E1: message-id=<[email protected]> Nov 26 14:04:06 ubuntu postfix/qmgr[12108]: A742E2B9E1: from=<[email protected]>, size=300, nrcpt=1 (queue active) Nov 26 14:04:06 ubuntu postfix/local[12115]: A742E2B9E1: to=<[email protected]>, relay=local, delay=3.3, delays=3.3/0/0/$ Nov 26 14:04:06 ubuntu postfix/cleanup[12114]: AD2662B9E0: message-id=<[email protected]> Nov 26 14:04:06 ubuntu postfix/qmgr[12108]: AD2662B9E0: from=<>, size=2087, nrcpt=1 (queue active) Nov 26 14:04:06 ubuntu postfix/bounce[12117]: A742E2B9E1: sender non-delivery notification: AD2662B9E0 Nov 26 14:04:06 ubuntu postfix/local[12115]: AD2662B9E0: to=<[email protected]>, relay=local, delay=0.02, delays=0.01/0/0/0$ Nov 26 14:04:06 ubuntu postfix/qmgr[12108]: AD2662B9E0: removed Nov 26 14:04:06 ubuntu postfix/qmgr[12108]: A742E2B9E1: removed I'm not really understanding the log file, and obviously I'm not getting any emails. Right now I'm running Ubuntu on a Virtualbox (development box). Is that a problem? The internet connection works fine on it. What about domains etc..? edit: /etc/postfix/main.cf # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client.

    Read the article

  • RHEL5: Can't create sparse file bigger than 256GB in tmpfs

    - by John Kugelman
    /var/log/lastlog gets written to when you log in. The size of this file is based off of the largest UID in the system. The larger the maximum UID, the larger this file is. Thankfully it's a sparse file so the size on disk is much smaller than the size ls reports (ls -s reports the size on disk). On our system we're authenticating against an Active Directory server, and the UIDs users are assigned end up being really, really large. Like, say, UID 900,000,000 for the first AD user, 900,000,001 for the second, etc. That's strange but should be okay. It results in /var/log/lastlog being huuuuuge, though--once an AD user logs in lastlog shows up as 280GB. Its real size is still small, thankfully. This works fine when /var/log/lastlog is stored on the hard drive on an ext3 filesystem. It breaks, however, if lastlog is stored in a tmpfs filesystem. Then it appears that the max file size for any file on the tmpfs is 256GB, so the sessreg program errors out trying to write to lastlog. Where is this 256GB limit coming from, and how can I increase it? As a simple test for creating large sparse files I've been doing: dd if=/dev/zero of=sparse-file bs=1 count=1 seek=300GB I've tried Googling for "tmpfs max file size", "256GB filesystem limit", "linux max file size", things like that. I haven't been able to find much. The only mention of 256GB I can find is that ext3 filesystems with 2KB blocks are limited to 256GB files. But our hard drives are formatted with 4K blocks so that doesn't seem to be it--not to mention this is happening in a tmpfs mounted ON TOP of the hard drive so the ext3 partition shouldn't be a factor. This is all happening on a 64-bit Red Hat Enterprise Linux 5.4 system. Interestingly, on my personal development machine, which is a 32-bit Fedora Core 6 box, I can create 300GB+ files in tmpfs filesystems no problem. On the RHEL5.4 systems it is no go.

    Read the article

  • Providing reverse records for records that map to ISP IP

    - by thejartender
    I have been instructed to use my ISP ip (as a temporary fix for mapping my name server and domain records as my router dishes out rfc 1918 adresses to devices in my network where I am running an Ubuntu server, my router and my development laptop andso I have fixed: $TTL 3H @ IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); thejarbar.org. IN A 10.0.0.42 @ IN NS ns.thejarbar.org. yuccalaptop IN A 10.0.0.19 ns IN A 10.0.0.42 gw IN A 10.0.0.138 www IN CNAME thejarbar.org. To a temporary version of: $TTL 3H @ IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); thejarbar.org. IN A 88.89.190.171 @ IN NS ns.thejarbar.org. yuccalaptop IN A 10.0.0.19 ns IN A 88.89.190.171 gw IN A 10.0.0.138 www IN CNAME thejarbar.org. I am using bind and when using named-checkzone on this file according to my zone configurations, this file has no errors. I then run dig thejarbar.org @88.89.190.171 and get an expected authorative reply. My issue is creating my reverse DNS SOA zone and I would gratly appreciate assistance and guidance. I am stuck on how to represent the reverse records correctly for the eddresses that map to my isp IP. I am trying: $TTL 3H 0.0.10.in-addr.arpa. IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); 171.190.89.88. IN PTR thejarbar.org. 171.190.89.88. IN NS ns.thejarbar.org. 19 IN PTR yuccalaptop.thejarbar.org. 138 IN PTR gw.thejarbar.org. www IN PTR www.thejarbar.org. But running named-checkzone on this file leaves an erroneous return that IN: has no NS records I would greatly appreciate assistance

    Read the article

  • My virtualhost not working for non-www version

    - by johnlai2004
    I have a development web server (ubuntu + apache) that can be accessed via the url glacialsummit.com. For some reason, http://www.glacialsummit.com serves pages from the /srv/www/glacialsummit.com/ directory, but http://glacialsummit.com serves pages from the /var/www/ directory. Here's what some of my virtualhost config files look like filename: /etc/apache2/sites-enabled/glacialsummit.com <VirtualHost 97.107.140.47:80> ServerAdmin [email protected] ServerName glacialsummit.com ServerAlias www.glacialsummit.com DocumentRoot /srv/www/glacialsummit.com/public_html/ ErrorLog /srv/www/glacialsummit.com/logs/error.log CustomLog /srv/www/glacialsummit.com/logs/access.log combined </VirtualHost> <VirtualHost 97.107.140.47:443> ServerAdmin [email protected] ServerName glacialsummit.com ServerAlias www.glacialsummit.com DocumentRoot /srv/www/glacialsummit.com/public_html/ ErrorLog /srv/www/glacialsummit.com/logs/error.log CustomLog /srv/www/glacialsummit.com/logs/access.log combined SSLEngine on SSLCertificateFile /etc/ssl/localcerts/www.glacialsummit.com.crt SSLCertificateKeyFile /etc/ssl/localcerts/www.glacialsummit.com.key <FilesMatch "\.(cgi|shtml|phtml|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory /usr/lib/cgi-bin> SSLOptions +StdEnvVars </Directory> BrowserMatch ".*MSIE.*" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 </VirtualHost> <VirtualHost 97.107.140.47:80> ServerAdmin [email protected] ServerName project.glacialsummit.com ServerAlias www.project.glacialsummit.com DocumentRoot /srv/www/project.glacialsummit.com/public_html/ ErrorLog /srv/www/project.glacialsummit.com/logs/error.log CustomLog /srv/www/project.glacialsummit.com/logs/access.log combined </VirtualHost> ## i have many other vhosts that work fine in this file filename /etc/apache2/sites-enabled/000-default <VirtualHost 97.107.140.47:80> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> filename: /etc/apache2/ports.conf NameVirtualHost 97.107.140.47:80 Listen 80 <IfModule mod_ssl.c> # SSL name based virtual hosts are not yet supported, therefore no # NameVirtualHost statement here Listen 443 </IfModule> How do I make http://glacialsummit.com serve web pages from /srv/www/glacialsummit.com/public_html just like http://www.glacialsummit.com?

    Read the article

  • open-sshd service withou pam support !! How can I add pam support to sshd? Ubuntu

    - by marc.riera
    Hi, I'm using AD as my user account server with ldap. Most of the servers run with UsePam yes except this one, it has lack of pam support on sshd. root@linserv9:~# ldd /usr/sbin/sshd linux-vdso.so.1 => (0x00007fff621fe000) libutil.so.1 => /lib/libutil.so.1 (0x00007fd759d0b000) libz.so.1 => /usr/lib/libz.so.1 (0x00007fd759af4000) libnsl.so.1 => /lib/libnsl.so.1 (0x00007fd7598db000) libcrypto.so.0.9.8 => /usr/lib/libcrypto.so.0.9.8 (0x00007fd75955b000) libcrypt.so.1 => /lib/libcrypt.so.1 (0x00007fd759323000) libc.so.6 => /lib/libc.so.6 (0x00007fd758fc1000) libdl.so.2 => /lib/libdl.so.2 (0x00007fd758dbd000) /lib64/ld-linux-x86-64.so.2 (0x00007fd759f0e000) I have this packages installed root@linserv9:~# dpkg -l|grep -E 'pam|ssh' ii denyhosts 2.6-2.1 an utility to help sys admins thwart ssh hac ii libpam-modules 0.99.7.1-5ubuntu6.1 Pluggable Authentication Modules for PAM ii libpam-runtime 0.99.7.1-5ubuntu6.1 Runtime support for the PAM library ii libpam-ssh 1.91.0-9.2 enable SSO behavior for ssh and pam ii libpam0g 0.99.7.1-5ubuntu6.1 Pluggable Authentication Modules library ii libpam0g-dev 0.99.7.1-5ubuntu6.1 Development files for PAM ii openssh-blacklist 0.1-1ubuntu0.8.04.1 list of blacklisted OpenSSH RSA and DSA keys ii openssh-client 1:4.7p1-8ubuntu1.2 secure shell client, an rlogin/rsh/rcp repla ii openssh-server 1:4.7p1-8ubuntu1.2 secure shell server, an rshd replacement ii quest-openssh 5.2p1_q13-1 Secure shell root@linserv9:~# What I'm doing wrong? thanks. Edit: root@linserv9:~# cat /etc/pam.d/sshd # PAM configuration for the Secure Shell service # Read environment variables from /etc/environment and # /etc/security/pam_env.conf. auth required pam_env.so # [1] # In Debian 4.0 (etch), locale-related environment variables were moved to # /etc/default/locale, so read that as well. auth required pam_env.so envfile=/etc/default/locale # Standard Un*x authentication. @include common-auth # Disallow non-root logins when /etc/nologin exists. account required pam_nologin.so # Uncomment and edit /etc/security/access.conf if you need to set complex # access limits that are hard to express in sshd_config. # account required pam_access.so # Standard Un*x authorization. @include common-account # Standard Un*x session setup and teardown. @include common-session # Print the message of the day upon successful login. session optional pam_motd.so # [1] # Print the status of the user's mailbox upon successful login. session optional pam_mail.so standard noenv # [1] # Set up user limits from /etc/security/limits.conf. session required pam_limits.so # Set up SELinux capabilities (need modified pam) # session required pam_selinux.so multiple # Standard Un*x password updating. @include common-password

    Read the article

  • How to connect to a Virtualbox guest from the host when network cable unplugged

    - by Greg K
    I'd like to work offline (I'm flying to the US twice this month), to do this I need access to a linux development server. When I work from home I boot a VirtualBox VM and that acts as my dev server for the day (providing Apache, PHP & MySQL to run my server side code). However, I'd like to work with my VM when I'm not connected to a network. I have my Ubuntu VM guest set up with a bridge connection so it can serve HTTP and provide SSH access from inside my local network. I've tried to manually configure my network settings on both Mac OSX (the host) and Ubuntu (the guest) but I can't even ping my own NIC address (127.0.0.1 can, 192.168.21.x I can't) in OS X when I unplug the cable. Manual network settings: $ ifconfig en0 en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether 00:xx:xx:xx:xx:xx inet 192.168.21.5 netmask 0xffffff00 broadcast 192.168.21.255 media: autoselect (100baseTX <full-duplex,flow-control>) status: active I can ping localhost fine, as well as my VM (.20) and SSH too. $ ping 192.168.21.5 PING 192.168.21.5 (192.168.21.5): 56 data bytes 64 bytes from 192.168.21.5: icmp_seq=0 ttl=64 time=0.085 ms 64 bytes from 192.168.21.5: icmp_seq=1 ttl=64 time=0.102 ms 64 bytes from 192.168.21.5: icmp_seq=2 ttl=64 time=0.100 ms 64 bytes from 192.168.21.5: icmp_seq=3 ttl=64 time=0.094 ms $ ping 192.168.21.20 PING 192.168.21.20 (192.168.21.20): 56 data bytes 64 bytes from 192.168.21.20: icmp_seq=0 ttl=64 time=0.910 ms 64 bytes from 192.168.21.20: icmp_seq=1 ttl=64 time=1.181 ms 64 bytes from 192.168.21.20: icmp_seq=2 ttl=64 time=1.159 ms 64 bytes from 192.168.21.20: icmp_seq=3 ttl=64 time=1.320 ms Network cable unplugged: $ ifconfig en0 en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether 00:xx:xx:xx:xx:xx media: autoselect status: inactive $ ping 192.168.21.5 PING 192.168.21.5 (192.168.21.5): 56 data bytes ping: sendto: No route to host ping: sendto: No route to host Request timeout for icmp_seq 0 ping: sendto: No route to host Request timeout for icmp_seq 1 Does OS X disable the NIC when the network cable is unplugged? Any way to stop it doing this?

    Read the article

  • Optimal setup for ASUS P6X58D Premium BIOS (no OC)?

    - by rumtscho
    Normally, I'd trust the mainboard manufacturer to choose the best options as defaults. But I had trouble with the board, because even with Quick Boot enabled, it booted twice as slowly as a Pentium 4 Celeron. Then I changed lots of options at once (most of them weren't explained in the manual, just mentioned with a single sentence) and the boot time is only marginally worse than the Pentium 4 (54 sec against 46 sec from button to pw entering screen). Now I don't know if I have turned something off which should have stayed on. I guess I even won't be able to boot from a CD now, because even though it is present in the boot sequence, I took off a timeout I think it needs to check whether there is a disk in the drive. The second reason is that I don't have an internal HDD, only a SSD. I forgot my sources blush but I am under the impression that today's BIOS and OS options are geared toward booting from a HDD, which is often less than optimal when one boots from a SSD, especially when there are functions which cause avoidable writing cycles, as a SSD wears out after too many writing cycles. Most of the things I've read concern the OS, but there are some BIOS-relevant options too. I am especially confused about the disk mode. The board supports AHCI, IDE-simulation and RAID, but of the different articles I've read, there is a proponent for each and no clear arguments for any. So can one tell me which options are important in general and which are important for a SSD-only system? I don't want to overclock the CPU, so you don't have to say anything about this (yes I know the board is meant for OC:)). I am thinking of overclocking the RAM, since they sold me 1600er heatsinked modules which are running at 1066 now, but I'm not sure yet about that. The rest of the system: i7-930, Intel X25-m G2, 6 GB RAM, GTS 250, some no-name Blue-ray ROM. 2 external HDDs over USB 2.0. Lots of other USB-connected hardware (12 devices I think), no SATA 3 drives (will disabling the controller have an impact on performance?), no LAN, only WiFi. Lucid Lynx 64 bit, no dual boot, no virtual installations. The main uses of the system are: managing and playing/showing all the media stored on the external disks, lots of image manipulation, some video editing, a bit of (non-demanding) gaming, rarely development. Lots of Internet surfing too, but this shouldn't have much impact on performance.

    Read the article

  • Converting an EC2 AMI to vmdk image

    - by Reed G. Law
    I've come quite close to getting Amazon Linux to boot inside VirtualBox, thanks to this answer and these websites. A quick overview of the steps I've taken: Launch EC2 instance with Amazon Linux 2011.09 64-bit AMI dd the contents of the EBS volume over ssh to a local image file. Mount the image file as a loopback device and then to a local mount point. Create a new empty disk image file, partition with an offset for a bootloader, and create an ext4 filesystem. Mount the new image's partition and copy everything from the EC2 image. Install grub (using Ubuntu's grub-legacy-ec2 package, not grub2). Convert the image file to vmdk using qemu-img. Create a new VirtualBox VM with the vmdk. Now the VM boots, grub loads, and the kernel is found. But it fails when it tries to mount the root device: dracut Warning: No root device "block:/dev/xvda1" found dracut Warning: Boot has failed. To debug this issue add "rdshell" to the kernel command line. dracut Warning: Signal caught! dracut Warning: Boot has failed. To debug this issue add "rdshell" to the kernel command line. Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.35.14-107.1.39.amzn1.x86_64 #1 I have tried changing /boot/grub/menu.lst to find the root device by label and UUID, but nothing works. I'm guessing the xen kernel is not compatible with VirtualBox. The reasoning behind all this effort is to make a Vagrant box that is as close to possible as the production enviroment, so deploys can be tested locally. I know it's cheap to do test runs on EC2, but poor connectivity often ruins the experience. Plus it would be really nice to have a virtual machine with the production environment so that co-workers don't have to install everything under the sun just to get up and running with app development. If I were to try running a different kernel, what kernel could I get to be as close as possible to Amazon Linux 2011.09?

    Read the article

  • Complete Active Directory redesign and GPO application

    - by Wolfgang Kuehne
    after much testing and hundreds of tries and hours invested I decided to consult you experts here. Overview: I want to apply some GPO to our users which will add some specific site to the Trusted Sites in Internet Explorer settings for all users. However, the more I try the more confusing the results become. The GPO is either applied to one group of users, or to another one. Finally, I came to the conclusion that this weird behavior is cause rather by the poor organization in Users and Groups in Active Directory. As such I want to kick the problem from the root: Redesign the Active Directory Users and Groups. Scenario: There is one Domain Controller, and we use Terminal Services (so there is a Terminal Server as well). Users usually log on to the Terminal Server using Remote Desktop to perform their daily tasks. I would classify the users in the following way: IT: Admins, Software Development Business: Administration, Management The current structure of the Active Directory Users and Groups is a result of the previous IT management. The company has used Small Business Server which has created multiple default user groups and containers. Unfortunately, the guys working before me have do no documentation at all. Now, as I inherit this structure I am in the no mans land. No idea which direction to head first. As you can see, the Active Directory User and Groups have become a bit confusing. There is no SBS anymore, but when migrating from SBS to the current Windows Server 2008 R2 environment the guys before me have simply copied the same structure. The real question: Where should I start cleaning from, ensuring that I won't break totally the current infrastructure? What is a nice organization for the scenario that I have explained above? Possible useful info for the current structure: Computers folder contains Terminal Services Computers user group Members: TerminalServer computer located at Server -> Terminalserver OU Member of: NONE Foreign Security Principals : EMPTY Managed Service Accounts : EMPTY Microsoft Exchange Security Groups : not sure if needed, our emails are administered by external service provider Distribution Groups : not sure if needed Security Groups : there are couple of groups which are needed SBS users : contains all the users Terminalserver : contains only the TerminalServer machine

    Read the article

  • Fedora 13 post security update boot problem

    - by Alex
    Hello. About a month ago I installed a security update that had new Kernek 2.6.34.x from 2.6.33.x), this is when the problem occurred for the first time. After the install my computer would not boot at all, black screen without any visible hard drive activity (I gave it good 30 minutes on black screen, before took actions)... I poped in installation DVD and went in rescue mode to change back the boot option to old kernel (was just a guess where the problem was). After restart computer loaded just file, took a long time for it to start because of SELinux targeted policy relabel is required. Relabeling could take very long time depending on file size. I assumed that the update got messed up somehow and continued working with modified boot option. Couple of days ago, there was another kernel update. I installed it and same problem as before. This rules out corrupted update theory... Black screen right after 'BIOS' screen before OS gets loaded. I had to rescue system again... Below is copy of my grub.conf file. I am fairly new to LINUX (couple of years of experience), mostly development and basic config... nothing crazy. # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,0) # kernel /vmlinuz-version ro root=/dev/mapper/vg_obalyuk-lv_root # initrd /initrd-[generic-]version.img #boot=/dev/sda default=2 timeout=0 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title Fedora (2.6.34.6-54.fc13.i686.PAE) root (hd0,0) kernel /vmlinuz-2.6.34.6-54.fc13.i686.PAE ro root=/dev/mapper/vg_obalyuk-lv_root rd_LVM_LV=vg_obalyuk/lv_root rd_LVM_LV=vg_obalyuk/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet initrd /initramfs-2.6.34.6-54.fc13.i686.PAE.img title Fedora (2.6.34.6-47.fc13.i686.PAE) root (hd0,0) kernel /vmlinuz-2.6.34.6-47.fc13.i686.PAE ro root=/dev/mapper/vg_obalyuk-lv_root rd_LVM_LV=vg_obalyuk/lv_root rd_LVM_LV=vg_obalyuk/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet initrd /initramfs-2.6.34.6-47.fc13.i686.PAE.img title Fedora (2.6.33.8-149.fc13.i686.PAE) root (hd0,0) kernel /vmlinuz-2.6.33.8-149.fc13.i686.PAE ro root=/dev/mapper/vg_obalyuk-lv_root rd_LVM_LV=vg_obalyuk/lv_root rd_LVM_LV=vg_obalyuk/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet initrd /initramfs-2.6.33.8-149.fc13.i686.PAE.img I like my system to be up to date... Let me know if I can post any other files that can be of help. Has anyone else had this problem? Does anyone has any ideas how to fix this problem? p.s. Anything helps, you ppl are great! thx for ur time.

    Read the article

  • Tomcat with virtual hosts - 404

    - by Thardas
    I have a CentOS 5.2 server set up with Apache 2.2.3 and Tomcat 5.5.27. The server hosts multiple virtual hosts connected to multiple Tomcats. For instance we have one tomcat for development and testing and one tomcat for production. project.demo.us.com points to dev tomcat and project.us.com points to production tomcat. Here's the virtual host's configuration: <VirtualHost *:80> ServerName project.demo.us.com CustomLog logs/project.demo.us.com/access_log combined env=!VLOG ErrorLog logs/project.demo.us.com/error_log DocumentRoot /var/www/vhosts/project.demo.us.com <Directory /var/www/vhosts/project.demo.us.com> Allow from all AllowOverride All Options -Indexes FollowSymLinks </Directory> ########## ########## ########## JkMount /project/* online </VirtualHost> JkMount line defines that we use online worker and our workers.properties contains this: worker.list=..., online, ... worker.online.port=7703 worker.online.host=localhost worker.online.type=ajp13 worker.online.lbfactor=1 And tomcat's conf/server.xml contains: <Connector port="7703" enableLookups="false" redirectPort="8443" protocol="AJP/1.3" URIEncoding="UTF-8" maxThreads="80" minSpareThreads="10" maxSpareThreads="15"/> I'm not sure what redirectPort is but I tried to telnet to that port and there's no one answering, so it shouldn't matter? Tomcat's webapps directory contains project.war and the server automatically deployed it under project directory which contains index.jsp and hello.html. The latter is for static debugging purposes. Now when I try to access http://project.demo.us.com/project/index.jsp, I get Tomcat's HTTP Status 404 - The requested resource () is not available. The same thing happens to hello.html so it's not working with static content either. Apache's access_log contains: 88.112.152.31 - - [10/Aug/2009:12:15:14 +0300] "GET /demo/index.jsp HTTP/1.1" 404 952 "-" "Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.5; en-US; rv:1.9.1.2) Gecko/20090729 Firefox/3.5.2" I couldn't find any mention of the request in Tomcat's logs. If I shutdown this specific tomcat, I no longer get Tomcat's 404 but Apache's 503 Service Temporarily Unavailable, so I should be configuring the correct Tomcat. Is there something obvious that I'm missing? Is there any place where I could find out what path the Tomcat is using to look for requested files?

    Read the article

  • How could I let Skydrive desktop sync to MicroSD in Windows 8 tablet?

    - by peSHIr
    I have a Samsung Slate 7 tablet with (now) Windows 8 on it. This machine has a 64 Gb SSD and I have a 64 Gb MicroSD card in it. I also have a Skydrive on my main Microsoft ID that contains about 45 Gb of content. With Windows and some development stuff installed, my Skydrive will not fit on the main drive of the tablet. (Besides, my idea was to keep data on the memory card anyway, to make it easier to repave the machine without data loss if need be.) My problem should now be clear: I want to install the Skydrive desktop app to sync my Skydrive to the MicroSD card. This is not possible, as Skydrive does not allow syncing files to removable drives. I have tried a number of things already, but none of them worked: Use the mklink command line tool to create a directory link/junction from a folder name on SSD to a folder on the MicroSD and then try to install Skydrive sync to the SSD link folder. Skydrive however still recognizes this as something it does not want to sync onto. The various different filter drivers mentioned on Agnipulse (including the Hitachi one) that should make windows see some or all of the removable drives in the system as fixed drives do not seem work on (64-bit) Windows 8: they either can't be installed, do nothing and/or cause Windows 8 to go into Automatic Repair mode when rebooting. The Lexar BootIt app seems to be meant to flip the relevant bit in the on-board drive controller of supported USB pen drives, but I tried it anyway. Of course it did nothing to how the MicroSD card was seen. I have now run out of ideas, it seems, and I was wondering if anyone here has a solution to let Windows 8 see the MicroSD memory card in my tablet as a fixed drive instead of removable drive, or some other way of getting the Skydrive desktop to sync my Skydrive data to that MicroSD card. And to be complete: this is not a duplicate question of this or this as those ask about getting USB drives multiple partitions to work on Windows XP. This question is specific about getting desktop Skydrive to sync to MicroSD card in Windows 8, which seems to be a question I have not seen on superuser so far.

    Read the article

  • recommendations for efficient offsite remote backup solution of vm's

    - by senorsmile
    I am looking for recommendations for backing up my current 6 vm's(and soon to grow to up to 20). Currently I am running a two node proxmox cluster(which is a debian base using kvm for virtualization with a custom web front end to administer). I have two nearly identical boxes with amd phenom II x4's and asus motherboards. Each has 4 500 GB sata2 hdd's, 1 for the os and other data for the proxmox install, and 3 using mdadm+drbd+lvm to share the 1.5 TB's of storage between the two machines. I mount lvm images to kvm for all of the virtual machines. I currently have the ability to do live transfer from one machine to the other, typically within seconds(it takes about 2 minutes on the largest vm running win2008 with m$ sql server). I am using proxmox's built-in vzdump utility to take snapshots of the vm's and store those on an external harddrive on the network. I then have jungledisk service (using rackspace) to sync the vzdump folder for remote offsite backup. This is all fine and dandy, but it's not very scalable. For one, the backups themselves can take up to a few hours every night. With jungledisk's block level incremental transfers, the sync only transfers a small portion of the data offsite, but that still takes at least a half an hour. The much better solution would of course be something that allows me to instantly take the difference of two time points (say what was written from 6am to 7am), zip it, then send that difference file to the backup server which would instantly transfer to the remote storage on rackspace. I have looked a little into zfs and it's ability to do send/receive. That coupled with a pipe of the data in bzip or something would seem perfect. However, it seems that implementing a nexenta server with zfs would essentially require at least one or two more dedicated storage servers to serve iSCSI block volumes (via zvol's???) to the proxmox servers. I would prefer to keep the setup as minimal as possible (i.e. NOT having separate storage servers) if at all possible. I have also briefly read about zumastor. It looks like it could also do what I want, but it appears to have halted development in 2008. So, zfs, zumastor or other?

    Read the article

  • How to upgrade a 1.4.3 TortoiseSVN-created repository to 1.6.x?

    - by SiegeX
    A few years ago, TortoiseSVN 1.4.3 was deployed to our software development team and we are now looking at upgrading the client to the latest 1.6.x version. I had hoped this upgrade would be transparent with the additional features and modifications being client-side. For the most part, this was true except for a very important feature -- merging. When I try to merge a feature branch back into truck I get a show-stopping "Merge tracking not supported error." Here are some facts worth noting: When the repo was first created (before I was on board), it was created via the TortoiseSVN client itself. We do not have a 'svn server daemon' per se, rather the repository folders/database resides on a share folder that is accessible from our workstation machines via file:///. This was actually an eye opener for me, I had always thought there was some SVN server daemon we were talking to. We do not have any access to the underlying machine hosting the SVN share other than the ability to read/write to the share itself. I don't even know what OS the machine is running on. This share server was chosen because its drives are backed up nightly by our IT group. In all honesty, we really don't need the merge tracking feature although it would be nice to have. For the time being it would be sufficient to be able to use a 1.6.x TortoiseSVN client on the 1.4.3 repository and have it merge (sans tracking) without error. So now the question becomes, how does one upgrade a client-created 1.4.3 repo to a 1.6.x compatible version without access to the underlying machine the repo resides on? I was hoping the TortoiseSVN client itself had the ability to do this but that does not appear to be the case. Will I be forced to copy the entire repo over to my local drive, run some svn commands to upgrade the repo locally then copy the repo back to the share point? If so, will doing this break any compatibility with the the 1.4.3 clients in case we cant upgrade them all at the same time? Thanks for the help.

    Read the article

  • How to upgrade a 1.4.3 TortoiseSVN-created repository to 1.6.x?

    - by SiegeX
    A few years ago, TortoiseSVN 1.4.3 was deployed to our software development team and we are now looking at upgrading the client to the latest 1.6.x version. I had hoped this upgrade would be transparent with the additional features and modifications being client-side. For the most part, this was true except for a very important feature -- merging. When I try to merge a feature branch back into truck I get a show-stopping "Merge tracking not supported error." Here are some facts worth noting: When the repo was first created (before I was on board), it was created via the TortoiseSVN client itself. We do not have a 'svn server daemon' per se, rather the repository folders/database resides on a share folder that is accessible from our workstation machines via file:///. This was actually an eye opener for me, I had always thought there was some SVN server daemon we were talking to. We do not have any access to the underlying machine hosting the SVN share other than the ability to read/write to the share itself. I don't even know what OS the machine is running on. This share server was chosen because its drives are backed up nightly by our IT group. In all honesty, we really don't need the merge tracking feature although it would be nice to have. For the time being it would be sufficient to be able to use a 1.6.x TortoiseSVN client on the 1.4.3 repository and have it merge (sans tracking) without error. So now the question becomes, how does one upgrade a client-created 1.4.3 repo to a 1.6.x compatible version without access to the underlying machine the repo resides on? I was hoping the TortoiseSVN client itself had the ability to do this but that does not appear to be the case. Will I be forced to copy the entire repo over to my local drive, run some svn commands to upgrade the repo locally then copy the repo back to the share point? If so, will doing this break any compatibility with the the 1.4.3 clients in case we cant upgrade them all at the same time? Thanks for the help.

    Read the article

  • Deploying website content via Subversion

    - by Johann
    we have recently set up a new development infrastructure and process for one of our clients. This involves the strict use of subversion as a central source code repository. The svn repositories contains a seperate branch for code on the live system (/branches/live/). The repositories are use for PHP content (mainly Wordpress Blogs), but in future they may hold other asp code as well. Bonus points for a solutions which more or less in the same way with ASP code on Windows Server 2008 R2. We have two servers: one staging system and one live system. The staging system is updated regularly with the code of the trunk. The live system is update manually. Each webroot on the servers are working copy of either the trunk (staging system) or the live branch (live system). The current workflow is: Developing on the dev's box - commit into the trunk - auto-deploy on staging system - testing on the staging system - merging into /branches/live/ - manual deployment on live system. This works for one-way changes very well, however we have some troubles on every wordpress (or plugin) update: The WP update process removes the directories and unpack the archive of the new version. This removes the svn admin area as well, which produces a lot of errors. We could switch to SVN 1.7 with a single, global admin area, but this would only solve on part of the problem. Finally, we have done the update via the WP Gui, restored the svn admin area, added/removed the files and committed the changes to the trunk. After testing, we had to do basically the same thing on the live server (except the commit, we just reverted the changes and merged the new files from the staging system to the live system). I'm currently thinking of the following: The htdocs of each website is a svn export Each website has a svn working copy beside the htdocs directory a script which "replays" the changes in the wc from htdocs after an update in WP (rsync'ing the changed files to the working copy, rsync'ing new files and svn add them and finally svn delete the deleted files). The script would have to exclude some files (like wp-config.php, uploads/temp directories, etc.). Are there better ways to do this? Unfortunaly, a complete CI server is out of scope due to time and budget limitations.

    Read the article

  • Web application/ site service (like Google App Engine) for PHP/ MySQL and Postgres

    - by Simon
    I would like to find a service similar to Google App Engine for PHP/ MySQL/ Postgres sites/ applications. We host two different types of site. i). PHP/ Mysql/ Zend Framework <VirtualHost *:80> DocumentRoot "/home/websites/website.com/public" ServerName website.com # This should be omitted in the production environment SetEnv APPLICATION_ENV development <Directory "/home/websites/website.com/public"> Options Indexes MultiViews FollowSymLinks AllowOverride All Order allow,deny Allow from all RewriteEngine On RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ index.php [NC,L] </Directory> </VirtualHost> ii). Matrix CMS - PHP/ Postgres + loads of pear classes <VirtualHost *:80> ServerName server.example.com DocumentRoot /home/websites/mysource_matrix/core/web Options -Indexes FollowSymLinks <Directory /home/websites/mysource_matrix> Order deny,allow Deny from all </Directory> <DirectoryMatch "^/home/websites/mysource_matrix/(core/(web|lib)|data/public|fudge)"> Order allow,deny Allow from all </DirectoryMatch> <DirectoryMatch "^/home/websites/mysource_matrix/data/public/assets"> php_flag engine off </DirectoryMatch> <FilesMatch "\.inc$"> Order allow,deny Deny from all </FilesMatch> <LocationMatch "/(CVS|\.FFV)/"> Order allow,deny Deny from all </LocationMatch> Alias /__fudge /home/websites/mysource_matrix/fudge Alias /__data /home/websites/mysource_matrix/data/public Alias /__lib /home/websites/mysource_matrix/core/lib Alias / /home/websites/mysource_matrix/core/web/index.php/ </VirtualHost> My key requirements are: I don't want to worry/ know/ care about the server/ infrastructure Secure/ up to date software/ os Good monitoring Automatic scalability SLA I apologise for the length of the question. In short all I want to do is i). create vhost, ii). create db iii). install app/ site iv). relax. Thanks. Edit: I include the Matrix vhost because that is the only complication that I cannot really do via a .htaccess file.

    Read the article

  • What is the current state of Ubuntu's transition from init scripts to Upstart? [migrated]

    - by Adam Eberlin
    What is the current state of Ubuntu's transition from init.d scripts to upstart? I was curious, so I compared the contents of /etc/init.d/ to /etc/init/ on one of our development machines, which is running Ubuntu 12.04 LTS Server. # /etc/init.d/ # /etc/init/ acpid acpid.conf apache2 --------------------------- apparmor --------------------------- apport apport.conf atd atd.conf bind9 --------------------------- bootlogd --------------------------- cgroup-lite cgroup-lite.conf --------------------------- console.conf console-setup console-setup.conf --------------------------- container-detect.conf --------------------------- control-alt-delete.conf cron cron.conf dbus dbus.conf dmesg dmesg.conf dns-clean --------------------------- friendly-recovery --------------------------- --------------------------- failsafe.conf --------------------------- flush-early-job-log.conf --------------------------- friendly-recovery.conf grub-common --------------------------- halt --------------------------- hostname hostname.conf hwclock hwclock.conf hwclock-save hwclock-save.conf irqbalance irqbalance.conf killprocs --------------------------- lxc lxc.conf lxc-net lxc-net.conf module-init-tools module-init-tools.conf --------------------------- mountall.conf --------------------------- mountall-net.conf --------------------------- mountall-reboot.conf --------------------------- mountall-shell.conf --------------------------- mounted-debugfs.conf --------------------------- mounted-dev.conf --------------------------- mounted-proc.conf --------------------------- mounted-run.conf --------------------------- mounted-tmp.conf --------------------------- mounted-var.conf networking networking.conf network-interface network-interface.conf network-interface-container network-interface-container.conf network-interface-security network-interface-security.conf newrelic-sysmond --------------------------- ondemand --------------------------- plymouth plymouth.conf plymouth-log plymouth-log.conf plymouth-splash plymouth-splash.conf plymouth-stop plymouth-stop.conf plymouth-upstart-bridge plymouth-upstart-bridge.conf postgresql --------------------------- pppd-dns --------------------------- procps procps.conf rc rc.conf rc.local --------------------------- rcS rcS.conf --------------------------- rc-sysinit.conf reboot --------------------------- resolvconf resolvconf.conf rsync --------------------------- rsyslog rsyslog.conf screen-cleanup screen-cleanup.conf sendsigs --------------------------- setvtrgb setvtrgb.conf --------------------------- shutdown.conf single --------------------------- skeleton --------------------------- ssh ssh.conf stop-bootlogd --------------------------- stop-bootlogd-single --------------------------- sudo --------------------------- --------------------------- tty1.conf --------------------------- tty2.conf --------------------------- tty3.conf --------------------------- tty4.conf --------------------------- tty5.conf --------------------------- tty6.conf udev udev.conf udev-fallback-graphics udev-fallback-graphics.conf udev-finish udev-finish.conf udevmonitor udevmonitor.conf udevtrigger udevtrigger.conf ufw ufw.conf umountfs --------------------------- umountnfs.sh --------------------------- umountroot --------------------------- --------------------------- upstart-socket-bridge.conf --------------------------- upstart-udev-bridge.conf urandom --------------------------- --------------------------- ureadahead.conf --------------------------- ureadahead-other.conf --------------------------- wait-for-state.conf whoopsie whoopsie.conf To be honest, I'm not entirely sure if I'm interpreting the division of responsibilities properly, as I didn't expect to see any overlap (of what framework handles which services). So I was quite surprised to learn that there was a significant amount of overlap in service references, in addition to being unable to discern which of the two was intended to be the primary service framework. Why does there seem to be a fair amount of redundancy in individual service handling between init.d and upstart? Is something else at play here that I'm missing? What is preventing upstart from completely taking over for init.d? Is there some functionality that certain daemons require which upstart does not yet have, which are preventing some services from converting? Or is it something else entirely?

    Read the article

  • Windows 2008 IIS 7.0 HTTP to HTTPS Redirect -- Versus IIS 6.0 Mechanism

    - by Dan7el
    This topic, creating a mechanism for redirection from HTTP to HTTPS on a Windows 2008 server running IIS 7.0 is a much written-about topic on the Internet. How this is done is really not so much my issue. My issue is more of explaining why this can't be done with the standard HTTP Redirect module that ships with Windows 2008 IIS 7.0. Instead, there are other methods needed that are more arduous. First, the IIS 6.0 method requires no externally available modules nor does it require any additional modifications to the web.config or any type of other development effort. It's outlined here: http://blogs.microsoft.co.il/blogs/dorr/archive/2009/01/13/how-to-force-redirection-from-http-to-https-on-iis-6-0.aspx And, you can see the basic steps are to run the snap-in, get the properties on the site, and do some modifications. Presto, you have the HTTP -- HTTP redirect setup. Now, on the IIS 7.0 platform, it doesn't seem this simple. An initial search found the following site: http://www.sslshopper.com/iis7-redirect-http-to-https.html Which has two separate approcates: 1. Involves installing a separately available Microsoft module -- URL Rewrite Module, and then adding XML to the web.config. 2. Custom Error Page. ...there might be other methods, but these are the basic ones and the first is listed as the primary method. But wait...There exists on the IIS 7.0 an HTTP Redirect Module. So...why can't I use the HTTP Redirect Module to do this very thing? This is really my big question. I need to know this because my management is going to insist I use the HTTP Redirect Module and set up the HTTP to HTTPS redirect in a similar fashion to how we do in IIS 6.0. Can someone please explain to me, in clean, simple, easy to understand, terms that both I and my management can understand as to why I need to go get the URL Rewrite Module and install that on the server and make the web.config changes suggested by the article instead of simply using the HTTP Redirect module that's already installed on the site? Thanks a bunch.

    Read the article

  • debian packages version convention

    - by JackWu
    I'm using debian/Ubuntu, and get confused about versions of packages. When using dpkg -l command, I get: ii vim 2:7.3.429-2ubuntu2.1 Vi IMproved - enhanced vi editor ii vim-common 2:7.3.429-2ubuntu2.1 Vi IMproved - Common files ii vim-runtime 2:7.3.429-2ubuntu2.1 Vi IMproved - Runtime files ii vim-tiny 2:7.3.429-2ubuntu2.1 Vi IMproved - enhanced vi editor - compact version ii virt-what 1.11-1 detect if we are running in a virtual machine ii w3m 0.5.3-5ubuntu1 WWW browsable pager with excellent tables/frames support ii watershed 6 reduce superfluous executions of idempotent command ii wget 1.13.4-2ubuntu1 retrieves files from the web ii whiptail 0.52.11-2ubuntu10 Displays user-friendly dialog boxes from shell scripts ii whoopsie 0.1.33 Ubuntu crash database submission daemon ii wimlib9 1.5.0-1~webupd8~precise Library to extract, create, modify, and mount WIM files ii wimtools 1.5.0-1~webupd8~precise Tools to extract, create, modify, and mount WIM files ii wireless-tools 30~pre9-5ubuntu2 Tools for manipulating Linux Wireless Extensions ii wpasupplicant 0.7.3-6ubuntu2.1 client support for WPA and WPA2 (IEEE 802.11i) ii x11-common 1:7.6+12ubuntu2 X Window System (X.Org) infrastructure ii x11-utils 7.6+4ubuntu0.1 X11 utilities ii xauth 1:1.0.6-1 X authentication utility ii xbitmaps 1.1.1-1 Base X bitmaps ii xclip 0.12-1 command line interface to X selections ii xfonts-encodings 1:1.0.4-1ubuntu1 Encodings for X.Org fonts ii xfonts-utils 1:7.6+1 X Window System font utility programs ii xkb-data 2.5-1ubuntu1.3 X Keyboard Extension (XKB) configuration data ii xml-core 0.13 XML infrastructure and XML catalog file support rc xpdf 3.02-21build1 Portable Document Format (PDF) reader ii xterm 271-1ubuntu2.1 X terminal emulator ii xz-lzma 5.1.1alpha+20110809-3 XZ-format compression utilities - compatibility commands ii xz-utils 5.1.1alpha+20110809-3 XZ-format compression utilities ii zabbix-agent 1:1.8.11-1 network monitoring solution - agent ii zlib1g 1:1.2.3.4.dfsg-3ubuntu4 compression library - runtime ii zlib1g-dev 1:1.2.3.4.dfsg-3ubuntu4 compression library - development ii zsh 4.3.17-1ubuntu1 shell with lots of features The third column is version, but it all messed up in a way I can't understand. I mean, different packages use total different naming specification. Here are the major questions: Why there are ubuntu in them, and there are not? what all the special -~+ mean? alpha and build, dfsg, what are they? Can I just use them casually? vim and other packages have 2:, what does that mean? How version comparison works, since they can be so different? Can anyone please explain this to me? Or where can I find an official document? Thanks in advance.

    Read the article

  • Cannot connect to WEBrick on home network

    - by Chris Stewart
    I'm an Android developer and often my applications require server-side code. I typically use Ruby on Rails for the web app, and during development will run the server on my local machine (Mac OS X) with WEBrick. In the morning when I get to the office, I'll run ifconfig in the console to see what IP my laptop has been given that day. I'll use that IP in my Android app when making requests to the web app in question. This all works fine, when I'm in my office. When I get home, I attempt to do the same thing, find my laptop's IP via ifconfig, set it in my app's config file, but the destination can never be found. To exclude my app from the set of hurdles, I attempt to visit the web server IP (e.g., http://192.168.1.4:3000) from my phone's browser, and it cannot connect. If I try from my laptop, which is running the web server, it works fine. If I try from another machine, on the same network, it also is unable to connect. Given this, I think I've narrowed it down to some kind of configuration in my home network, but I frankly have no idea what the cause could be. I don't have anything special at home, your basic Verizon FiOS router/modem with everything connected via Wi-Fi (Wi-Fi for both phone and laptop at work as well, fyi). I've tried disabling the firewall on my Verizon router, enabling port forwarding, and just about everything else I could do for port 3000, and nothing has changed. Dear Server Fault geniuses, please help a poor developer out. :) Edit: Some follow up items to add. My Mac's firewall is not active, and all incoming requests are allowed. I've also verified on my phone and laptop, that they're on the same network (192.168.1.4 Mac, 192.168.1.9 Phone). I have no idea why this isn't working. Edit 2: I went into System Preferences, enabled Web Sharing, and tried to view the website from my phone and it didn't connect. So it's not WEBrick or related to Rails. The firewall on my machine is off and the firewall on my router is off. Edit 3: Some progress. I set up port forwarding for port 3000 to my laptop, found the external IP, and used that and it connected fine. So, there's definitely something not quite set up correctly on my internal network.

    Read the article

  • Drupal on an NFS share has terrible performance

    - by Marcus
    We have a setup where a Drupal 7 site with the following setup - a VMware ESXi 4.1 host server running a web vm and an NFS VM. The web VM is using Apache and mod_php. The site is still in development thus we have to turn off all forms of caching due to the frequently-updated files. Each page request takes around 15-20 seconds to complete. Profiling the PHP code shows that the vast majority of time (normally over 90%) is taking by all the is_dir(), is_file() function calls that load up the modules. I've increased PHP's realpath cache size to several megs and an strace shows that the lstat calls then drop from over 200 to around 6 and stat() decreases a bit (around 600 calls). However, while this has shaved off quite a bit of time, I am simply unable to break past the 10 second per request barrier. Is there a way to get better performance out of this setup that doesn't involve caching? Configs and stats: VMs: web - Centos 6 64bt, 2.5GB RAM, normal CPU/HD prioritisation nfs - Centos 6 64bt, 2GB RAM, normal CPU priority, high HD priority PHP: 32M realpath cache size (it's this high for testing purposes) NFS: ~]# egrep -v '#|^$' /etc/nfsmount.conf [ NFSMount_Global_Options ] Defaultvers=4 Ac=False Rsize=32k Wsize=32k Bsize=32k Reading speeds via NFS are not an issue a dd of a 100M test file using 32k blocks returns: 3200+0 records in 3200+0 records out 104857600 bytes (105 MB) copied, 1.84984 s, 56.7 MB/s real 0m1.857s user 0m0.007s sys 0m0.330s Strace on Apache process with empty realpath cache: % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 50.78 1.157452 337 3434 28 stat 32.58 0.742656 628 1182 425 open 9.29 0.211788 762 278 1 lstat 3.17 0.072322 0 237865 write 2.45 0.055839 490 114 13 access 0.45 0.010262 43 237 brk 0.34 0.007725 10 811 74 read 0.28 0.006340 9 679 fstat 0.22 0.005069 18 281 poll 0.20 0.004533 6 698 getdents 0.09 0.001960 10 190 mmap 0.05 0.001065 14 74 accept4 0.04 0.001000 333 3 chdir 0.03 0.000750 4 190 munmap 0.01 0.000339 0 836 close 0.01 0.000247 3 75 writev 0.00 0.000068 0 611 fcntl 0.00 0.000063 1 77 shutdown 0.00 0.000000 0 1 lseek 0.00 0.000000 0 5 rt_sigaction 0.00 0.000000 0 1 rt_sigprocmask 0.00 0.000000 0 3 setitimer 0.00 0.000000 0 5 socket 0.00 0.000000 0 5 5 connect 0.00 0.000000 0 74 getsockname 0.00 0.000000 0 15 setsockopt 0.00 0.000000 0 5 getcwd 0.00 0.000000 0 1 futex ------ ----------- ----------- --------- --------- ---------------- Strace after realpaths are cached % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 60.14 1.371006 484 2831 28 stat 31.79 0.724705 627 1155 425 open 3.53 0.080354 0 237865 write 2.65 0.060433 530 114 13 access 0.43 0.009913 99 100 brk 0.38 0.008730 11 804 74 read 0.35 0.007910 12 675 fstat 0.30 0.006775 10 654 getdents 0.13 0.003065 11 281 poll 0.09 0.002000 333 6 1 lstat 0.07 0.001545 2 807 close 0.05 0.001063 14 74 accept4 0.04 0.001000 6 179 mmap 0.02 0.000404 2 179 munmap 0.01 0.000271 4 75 writev 0.01 0.000212 0 611 fcntl 0.01 0.000129 2 77 shutdown 0.00 0.000022 0 74 getsockname 0.00 0.000000 0 1 lseek 0.00 0.000000 0 5 rt_sigaction 0.00 0.000000 0 1 rt_sigprocmask 0.00 0.000000 0 3 setitimer 0.00 0.000000 0 3 socket 0.00 0.000000 0 3 3 connect 0.00 0.000000 0 15 setsockopt 0.00 0.000000 0 5 getcwd 0.00 0.000000 0 3 chdir ------ ----------- ----------- --------- --------- ---------------- Mount: nfs.xxx.xxx.xxx:/path/to/website/files on /path/to/website/files type nfs (rw,hard,intr,noac,vers=4,addr=xx.xx.xx.xx,clientaddr=xx.xx.xx.xx) Any help is, naturally, appreciated.

    Read the article

  • Apache won't follow Symlink

    - by Marvin Dickhaus
    I have a LAMP server (Ubuntu 12.10) setup on my development machine. It is a T60 modified with an SSD. The server base is in /var/www. Apache has the following config: DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews SymLinksIfOwnerMatch AllowOverride all Order allow,deny allow from all </Directory> I'm currently developing a SilverStripe CMS featured site. The folder for the server is /var/www/sfk/. The framework and all cms relavant features are in their respective folders. The only folder that need to be modified would be the /var/www/sfk/mysite folder. Because of that I want to keep the mysite folder under my home directory and symlink it into the server folder. So here is what I've done: ln -s ~/sfk/mysite/ /var/www/sfk/ sudo chgrp www-data /var/www/sfk/mysite -R ls tells me the following: /var/www/sfk (exerpt) drwxr-xr-x 3 marvin www-data 4096 Nov 16 16:53 assets drwxr-xr-x 12 marvin www-data 4096 Nov 16 16:53 cms drwxr-xr-x 29 marvin www-data 4096 Nov 16 16:53 framework -rw-r--r-- 1 marvin www-data 2410 Nov 16 16:53 index.php lrwxrwxrwx 1 marvin www-data 24 Nov 20 17:45 mysite -> /home/marvin/sfk/mysite/ -rw-rw-r-- 1 marvin www-data 514 Nov 16 16:55 _ss_environment.php drwxr-xr-x 4 marvin www-data 4096 Nov 16 16:53 themes and ls /var/www/sfk/mysite/ drwxrwxr-x 6 marvin www-data 4096 Nov 16 00:15 code drwxrwxr-x 2 marvin www-data 4096 Nov 16 11:51 _config -rwxrwxr-x 1 marvin www-data 2685 Nov 16 15:39 _config.php drwxrwxr-x 2 marvin www-data 4096 Nov 16 00:15 css drwxrwxr-x 2 marvin www-data 4096 Nov 16 00:15 images drwxrwxr-x 2 marvin www-data 4096 Nov 16 00:15 javascript drwxrwxr-x 5 marvin www-data 4096 Nov 16 00:15 templates This is literally the same setup I have on my desktop machine. The problem I have is that the mysite/ folder is just not recognized. I'm thankful for every advice I get. I'm frustrated because I'm stuck with this issue for hours.

    Read the article

  • ASA and cisco vs NSA sonic firewall

    - by Lbaker101
    Currently I’m trying to structure our network to fully support and be redundant with BGP/Multi homing. Our current company size is 40 employees but the major part of that is our Development department. We are a software company and continued connection to the internet is a requirement as 90% of work stops when the net goes down. The only thing hosted on site (that needs to remain up) is our exchange server. Right now i'm faced with 2 different directions and was wondering if I could get your opinions on this. We will have 2 ISPs that are both 20meg up/down and dedicated fiber (so 40megs combined). This is handed off as an Ethernet cable into our server room. ISP#1 first digital ISP#2 CenturyLink we currently have 2x ASA5505s but the 2nd one is not in use. It was there to be a failover and it just needs the security+ license to be matched with the primary device. But this depends on the network structure. I have been looking into the hardware that would be required to be fully redundant and I found that we will either of the following. 2x Cisco 2921+ series routers with failover licenses. They will go in front of the ASAs and either connects in a failover state or 1 ISP into each of the 2921 series routers and then 1 line into each of the ASAs (thus all 4 hardware components will be used actively). So 2x Cisco 2921+ series routers 2x Cisco ASA5505 firewalls The other route 2x SonicWalls NSA2400MX series. 1 primary and the secondary will be in a failover state. This will remove the ASAs from the network and be about 2k cheaper than the cisco route. This also brings down the points of failure because it’s just the 2x sonicwalls It will also allow us to scale all the way up to 200-400 users (depending on their configuration). This also makes so the Sonic walls. So the real question is with the added functionality ect of the sonicwall is there a point in paying so much more to stay the cisco route? Thanks!

    Read the article

< Previous Page | 971 972 973 974 975 976 977 978 979 980 981 982  | Next Page >