Search Results

Search found 37607 results on 1505 pages for 'ms access 97'.

Page 983/1505 | < Previous Page | 979 980 981 982 983 984 985 986 987 988 989 990  | Next Page >

• Multiple interfaces to one IP address?

  - by Delan Azabani

  At present, I have: a Netgear router with DHCP off at 192.168.0.1 my computer eth0 at 192.168.0.2 wlan0 at 192.168.0.2 The wlan0 interface always connects to the router, while the eth0 interface connects to other computers with crossover and acts as a dnsmasq DHCP server for network boot and installation. If I use the Gnome NetworkManager to enable both connections, that is, with wlan0 connected to the router/internet and eth0 to another computer, both as 192.168.0.2, I cannot access the internet while eth0 is connected. Why is this? How can I configure my computer to follow wlan0 for Internet usage, but use eth0 for itself (the latter is working but blocking wlan0).

  Read the article

• Windows 7 can ping but can't see device on other subnet

  - by user192702

  I have 2 Windows 7 on 2 different subnets but 1 of them is unable to reach a NAS. The topology is as follow. Any idea why this is the case? Is there some Windows settings I need to apply? Subnet 1 - PC 1 - NAS Subnet 2 - PC 2 PC 1 is able to do the following: - Load the admin page on the browser. - Show the NAS under Windows Explorer - Network. - Access the NAS when typed in \\ in Windows Explorer. PC 2 is unable to do any of the above 3. It can however ping the NAS and get a response.

  Read the article

• UDP multicast streaming of media content over WIFI

  - by sajad

  I am using vlc to stream media content over wireless network in scenario like this (from content streamer to stream receiver client): The bandwidth of wireless network is 54 Mb/s and UDP stream's required bandwidth is only 4 Mb/s; however there is trouble in receiving media stream and quality of playing specifically in multicast mode; means I can play the stream but it has jitter and does not play smoothly. In uni-cast I can stream up to 5 media streams correctly, but in multicast mode there is problem with streaming just one media! However when I stream from client some multicast streams; the wifi access-point can receive data correctly and I can see the video in "udp streamer" side correctly even when number of multicast streams increases to 9; But as you see I want to stream from streaming server and receive media in client size. Is this a typical problem of streaming real-time contents over wireless networks? Is it necessary to change configurations of my WIFI switch or it is just a software trouble? thank you

  Read the article

• Connecting two pcs through cable, at the same time as wireless

  - by Steffen

  I've got 2 pcs setup with WLAN - however when I copy files between the machines it takes forever (obviously, since I run 801.11g). So I thought, why not just connect them directly with a cable (my wireless router is the other end of the house, that's why I don't use cables to that) However how should I configure the LAN connection on each machine, so I can use it for transferring files between them, whilst using my WLAN to access the Internet ? I was thinking about letting one machine be gateway, but then Windows pops up with a lot of warnings (basically it says this won't work when you're using two disjoint networks) And now I'm at a loss as to what to try.

  Read the article

• Need Help with fixing permissions in mounted Drive

  - by Master

  I am trying a lot still my problem is not solved. I have a partion called Server and inside it i have 5 folders like Folder 1 FOlder 2 Folder 3 I am mounting the drive on startup by using following command as told to me by some senoir members and it works but with some problems /dev/sdb1 /media/Server ntfs defaults,umask=006,fmask=000,dmask=007,uid=1000,gid=1001 0 0 The problem is with this command the permission are applied to all folders like Folder 1 , Folder 2 , FOlder3 But i want that only FOlder 3 should be publicly readable and writable while all other should be private and no one should have access to that. How can i achieve that

  Read the article

• LDAP for privilege control?

  - by neoice

  I've been wondering for a while if LDAP can be used to control user privileges. For example, if I have UNIX and web logins, is there an easy way to grant a user access to just or just UNIX (or even both?) My current attempt at solving this very problem was to create 'login' and 'nologin' groups, but this doesn't seem fine-grained enough to meet the ideas I have in my head. I'm also still in the situation where all UNIX users are web users, which isn't a problem so much as an indicator of the limitations. Does anyone have any input on this? Has this problem already been solved?

  Read the article

• Can't connect to my FTP server, why?

  - by Joseph

  I have a windows 2008 server running with FTP 7 on IIS 7. I have it configured to connect as it is out of the box, with a particular user (lets say john) with read/write access. When I use my FileZilla client software, I can connect to the server as john just fine. No problems at all. However, when I try to connect using Windows Explorer or using the cmd prompt I get stone walled, saying "Login failed". My client machine is Windows Vista Ultimate. Does anyone know what might be causing this?

  Read the article

• Authenticating a Windows client to a Samba share

  - by hekevintran

  I have a Samba network share being served by a Linux machine. The share is read-only unless you give it a username and password. I want my Windows 7 client machine to connect to it. It appears that the Windows machine is connecting as a guest because it does not have write access. The Windows machine never asks me whether or not it should connect as a guest or with a username. How do I make the Windows machine authenticate? Where do I input my password? This seems like such a simple thing yet I am totally confused. On Mac OS and Linux, it simply asks you for a username.

  Read the article

• Where can I find logs for SFTP?

  - by Jake

  I'm trying to set up sftp-server but the client is getting an error, Connection closed by server with exitcode 1 /var/log/auth.log (below) doesn't help much, how can I find out what the error is? I'm running Ubuntu 10.04.1 LTS sshd[27236]: Accepted password for theuser from (my ip) port 13547 ssh2 sshd[27236]: pam_unix(sshd:session): session opened for user theuser by (uid=0) sshd[27300]: subsystem request for sftp sshd[27236]: pam_unix(sshd:session): session closed for user theuser Update: I've been prodding this for a while now, I've got the sftp command on another server giving me a more useful error. Request for subsystem 'sftp' failed on channel 0 Couldn't read packet: Connection reset by peer Everything I've found on the net suggests this id a problem with sftp-server but when I remove the chroot from sshd config I can access the system. I assume this means sftp-server is accessible and set up correctly.

  Read the article

• webmin not working on port 10000

  - by Ali

  Hi, I posted a similar question yesterday but can't seem to find that post. I have installed webmin on my server which has SSL and its service is running but I am unable to open it in browser. I thought may be the port is blocked by server's firewall so I entered port 10000 (TCP - inbound) in APF but still no luck. When I use https://localhost:10000 on server to access webmin then it works fine but not remotely. Why is such a simple thing so hard to run? Thanks

  Read the article

• One time use FTP passwords with C-Panel/WHM?

  - by Tim Post

  I'm in a position where I need to give about a dozen people one shot FTP access to a domain in order to upload their work. I'd like to use single shot passwords, e.g once they login and upload, that's it. Single use. I don't see any obvious means of doing this conveniently with C-Panel. Prior to going through the bother of writing a WHM add on to accomplish the same, I'd like to make sure that I'm not re-inventing the wheel. Thanks in advance.

  Read the article

• How to invalidate nginx reverse proxy cache in front of other nginx servers?

  - by Olivier Lance

  I'm running a Proxmox server on a single IP address, that will dispatch HTTP requests to containers depending on the requested host. I am using nginx on the Proxmox side to listen to HTTP requests and I am using the proxy_pass directive in my different server blocks to dispatch requests according to the server_name. My containers run on Ubuntu and are also running a nginx instance. I'm having troubles with caching on a particular website that is fully static: nginx keeps on serving me stale content after files updates, until I: Clear /var/cache/nginx/ and restart nginx or set proxy_cache off for this server and reload the config Here's the detail of my configuration: On the server (proxmox): /etc/nginx/nginx.conf: user www-data; worker_processes 8; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; use epoll; } http { ## # Basic Settings ## sendfile on; #tcp_nopush on; tcp_nodelay on; #keepalive_timeout 65; types_hash_max_size 2048; server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; client_body_buffer_size 1k; client_max_body_size 8m; large_client_header_buffers 1 1K; ignore_invalid_headers on; client_body_timeout 5; client_header_timeout 5; keepalive_timeout 5 5; send_timeout 5; server_name_in_redirect off; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Gzip Settings ## gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; gzip_vary on; gzip_proxied any; gzip_comp_level 6; # gzip_buffers 16 8k; gzip_http_version 1.1; gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; limit_conn_zone $binary_remote_addr zone=gulag:1m; limit_conn gulag 50; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } /etc/nginx/conf.d/proxy.conf: proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_hide_header X-Powered-By; proxy_intercept_errors on; proxy_buffering on; proxy_cache_key "$scheme://$host$request_uri"; proxy_cache_path /var/cache/nginx levels=1:2 keys_zone=cache:10m inactive=7d max_size=700m; /etc/nginx/sites-available/my-domain.conf: server { listen 80; server_name .my-domain.com; access_log off; location / { proxy_pass http://my-domain.local:80/; proxy_cache cache; proxy_cache_valid 12h; expires 30d; proxy_cache_use_stale error timeout invalid_header updating; } } On the container (my-domain.local): nginx.conf: (everything is inside the main config file -- it's been done quickly...) user www-data; worker_processes 1; error_log logs/error.log; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; #tcp_nopush on; keepalive_timeout 65; gzip off; server { listen 80; server_name .my-domain.com; root /var/www; access_log logs/host.access.log; } } I've read many blog posts and answers before resolving to posting my own questions... most answers I can see suggest setting sendfile off; but that didn't work for me. I have tried many other things, double checked my settings and all seems fine. So I'm wondering whether I am not expecting nginx's cache to do something it's not meant to...? Basically, I thought that if one of my static files in my container was updated, the cache in my reverse proxy would be invalidated and my browser would get the new version of the file when it requests it... But I now have the sentiment I misunderstood many things. Of all things, I now wonder how nginx on the server can know about a file in the container has changed? I have seen a directive proxy_header_pass (or something alike), should I use this to let the nginx instance from the container somehow inform the one in Proxmox about updated files? Is this expectation just a dream, or can I do it with nginx on my current architecture?

  Read the article

• Jail Linux user to directory for FTP login

  - by Greg

  I'm planning on using vsftpd to act as a secure ftp server, but I am having difficulty controlling the linux users that will be used as ftp logins. The users are required to be "jailed" into a specific directory (and subdirectories) and have full read/write access. Requirements: - User account "admin_ftp" should be jailed to /var/www directory. - Other accounts will be added as needed, for each site... e.g: - User account "picturegallery_ftp" should be jailed to /var/www/picturegallery.com directory. I have tried the following, but to no avail: # Group to store all ftp accounts in. groupadd ftp_accounts # Group for single user, with the same name as the username. groupadd admin_ftp useradd -g admin_ftp -G ftp_accounts admin_ftp chgrp -R ftp_accounts /var/www chmod -R g+w /var/www When I log into FTP using account admin_ftp, I am given the error message: 500 OOPS: cannot change directory:/home/admin_ftp But didn't I specify the home directory? Extra internets for a guide how to do this specifically for vsftpd :)

  Read the article

• Win 2k3 server's network problem.

  - by Sam

  I'm running 4 of Win2k3 64bit servers in the same subnet. It's been more than an year that I've running them without a problem. Recently, I kept losing the connection to one of the server. Let's say it's 'server A' which has a problem. Losing the connection means that I can't access to server A from the other servers. I've checked if server A has any internet connection problems or are there any abnomal event logs in the eventvwr - but haven't found any problems. The problem usually resolved if I restart the server again. But as time goes by, it keeps happen again and again. I can't afford to restart the server every time, and I really want to find out the reason. Can anyone help me out? Let me know if you guys need any of more information.

  Read the article

• Mount drive when symbolic link is accessed

  - by Danilo Campos

  I have a MacBook Pro with two internal drives: an SSD and a slow rotational drive. On the rotational drive I keep heavy, rarely accessed files like movies, photos, etc. These are symlinked from the SSD, so applications like iPhoto and iTunes will still find everything where they expect. I don't usually have the rotational drive mounted because it's loud and mostly unused. Is there a way to mount it when the system tries to access data behind a symlink, then unmount it automatically later? (Intermediate *nix user, here, feel free to tell me I am asking for magic.) Thanks for your help!

  Read the article

• Shared block device file system (cluster file system without networking)

  - by fungs

  Is there any file system that can be mounted multiple times and supports concurrent file access for Linux? Basically I want something like a cluster file system but without the need to have a running network for a distributed lock manager. That can be very handy in connection with virtual machines that can share data with the host or another VM without the need to create a network link. This I want to avoid to keep the network architecture secure (virtual machine in DMZ) but share large files. No need to scale it up, just two machines that mount the same block device. Shouldn't it be possible to have file locking information right on the disk?

  Read the article

• Temporary file storage - script for webserver

  - by Chris

  I'm looking for a script (preferably php) which I can use for to temporarily exchange files. I had such a script before (it was written in flash), but - damn - just can't find it anymore. Here the features I'm looking for: I have a logon, which allows me to create "upload spaces". for these "upload spaces" I define a time how long the space will be available for (until the files are deleted), and who can access it - in the means of typing in an email, and that user gets a link with the "online space", user ID and password. the other user then clicks on the link and uploads the file, and I get (preferably) an email should there be any file changes I get an email before the content gets deleted Now, 3 additional things: - it should be open- source - run on linux (preferably lamp) - no, I dont wanna use dropbox or similar :p Thanks in advance everybody, Cheers Chris

  Read the article

• What parameters to mdadm, to re-create md device with payload starting at 0x22000 position on backing storage?

  - by Adam Ryczkowski

  I try to recover from mdadm raid disaster, which happened when moving from ubuntu server 10.04 to 12.04. I know the correct order of devices from dmesg log, but given this information, I still cannot access the data. The superblocks look messy; the mdadm --examine for each disk is on this question on askubuntu By inspecting the raw contents of backing storage, I found the beginning of my data (the LUKS container in my case) at position 0x22000 relative to the beginning of the first partition in the raid. Question: What is the combination of options issued to "mdadm --create" to re-create mdadm that starts with the given offset? Bitmap size? PS. The relevant information from syslog when the system was healthy are pasted here.

  Read the article

• can't add sharepoint users from trusted domain

  - by user22215

  I have a very strange problem with our Sharepoint 2007 implementation. I went in today to grant access to a user and was greeted with "The user does not exist or is not unique." Let me start off by saying that this user is not on our domain we have a 2 way trust connecting to one of our subsidiaries. I can see the users in the people pick but can't add them into Sharepoint. This problem flared up after we had some trust issues last two days ago. So I must ask has anyone came across this error and if so what steps did you take to resolve it? This link further highlights my problem: http://social.technet.microsoft.com/forums/en-US/sharepointgeneral/thread/41265a91-191c-4952-9c8c-1e0129b9fd3a

  Read the article

• Windows 2003 Server on a domain, XP client PCs on a workgroup - file share without authentication?

  - by Zach

  I have a windows 2003 server on a domain and client PCs running XP on a workgroup. I have created a file share on the server that should be accessible by the client PCs. I even set the security and sharing to 'Everyone' just to test. When I try to access the file share from any of the XP machines, I get an authentication prompt that displays asking for credentials, even though 'Everyone' has full control currently (just for testing purposes). Why is it asking to authenticate? I need it to where it doesn't ask to authenticate. I also made sure passwords were set on all XP machines since I found this could be one possible issue and they all were. Any ideas? Thanks!

  Read the article

• VPN, routing, specified application

  - by Adrian

  Details: eth0 = current internet port pptp1 = VPN connection, if I connect to my provider, he give me an IP address, which is accessible from the internet. This is what I need. I want to connect through this IP back to my PC. I want to keep my primary internet connection (eth0) on my PC for all traffic, but route traffic to VPN for specified application/or port, to access application/port from the IP, which I given from the pptp provider. Huhh? Difficult but, it is possible? If yes, how? Incoming port will be always: 33340 Outgoing port can be change, but usually it is 33330

  Read the article

• Problem installing SSL on centos 5.2 with plesk

  - by Haluk

  Hello, I'm trying to install an ssl certificate to a dedicated centos 5.2 server. I followed the hosting company's instructions but the ssl is not working. When I try to access my website using https, Firefox gives the following error: uses an invalid security certificate. The certificate expired on 3/13/2010 11:56 AM. (Error code: sec_error_expired_certificate) I'm not sure where the problem is. You should also know that this server has plesk installed, even though I'm not using it, it could potentially be somehow overriding my httpd.conf or ssl.conf. Thanks!

  Read the article

• Remote connection to dynamic public ip & private ip addresses

  - by user53864

  Many times I connected to windows computer which has static public ip address via remote desktop over wan links. I'm wondering how could I connect to the remote computer that has dynamic public ip address & private ip addresses assigned. I've 2 systems at home: xp system-------connected to internet(dynamic public ip) & allowed other users to connected to the internet on the interface. windows vista system--------enabled dhcp on the interface to access internet from xp. How could I remotely connect from my office to the 'vista system'?. If I've a router/modem at my home it may be possible to allow the ports for the system but I don't. Any tips?

  Read the article

• what damage can be caused if scandisk is not run before defrag

  - by Justin Gregoire

  Hello, I would like to know what the damage to a drive can be if a scandisk is not performed before a disk defrag. I have looked up some sites that say a scandisk should be run to correct any issues that may be apparent on the system, making sure that the drive is free of errors before a disk defrag is done. I have to perform a defrag on a computer without having physical access to it (using remote connection). I know that the scandisk requires a reboot to the system (causing me to lose my connection) which would be difficult to restart physically if the system does not come back on by itself once rebooted (this has happened before). Any suggestions? Thank you.

  Read the article

• How to detect when a user copies files from a server over the network?

  - by Mr. Graves

  I have a few virtual servers + desktops that are used for shared development with remote users, including some consultants. Each user has an account with access to most aspects of the server. I don't want to prevent people from being productive, or track passwords or read emails, but I do want to know when and what files they copy from the virtual server or what they upload from the server to a remote site, and what if any applications they install. This will help make sure my IP is protected, that no one is installing tools they shouldn't, and that things are licensed appropriately. What is the simplest way to do this? In order of importance I would say detecting file transfers off the machine to be most critical. Thanks

  Read the article

< Previous Page | 979 980 981 982 983 984 985 986 987 988 989 990  | Next Page >