Search Results

Search found 30252 results on 1211 pages for 'network programming'.

Page 986/1211 | < Previous Page | 982 983 984 985 986 987 988 989 990 991 992 993  | Next Page >

• SQL server could not connect: Lacked Sufficient Buffer Space...

  - by chumad

  I recently moved my app to a new server - the app is written in c# against the 3.5 framework. The hardware is faster but the OS is the same (Win Server 2003). No new software is running. On the prior hardware the app would run for months with no problems. Now, in this new install, I get the following error after about 3 days, and the only way to fix it is to reboot: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.) I have yet to find a service I can even shut down to make it work. Anyone had this before and know a solution?

  Read the article

• How to forward traffic using iptables rules?

  - by ProbablePattern

  I am new to iptables and I have been doing Google searches for a few days now without finding a good solution to this problem. I have computer A with a public ip address (say 192.0.2.1) that can access the Internet unrestricted. I have another computer B with a private ip address (192.168.1.1) that can only access computer A. How do I use iptables to forward network traffic from B through A to the Internet? I need to use http, ftp, and https in order to use apt-get with sudo. Both computers run Ubuntu linux. I have tried using Squid but I think it is far too complicated for what I need to do.

  Read the article

• Avoid Windows Explorer to load complete executable file

  - by user13001

  On Windows Vista, when browsing to a network folder containing executables, Windows Explorer seems to load all the files completely just to be able to show the executable icon (the resource monitor indicates loads of traffic during the loading of the directory) On XP only a part of the file is loaded. Is there a way to avoid the complete loading of these files? Note that disabling my anti virus does not help. Update: This only happens with for executable linked with /SWAPRUN:NET. Microsoft confirmed this as a bug in Vista, but they seem not very eager to fix this.

  Read the article

• LAN full of public ipv4 addresses - How to filter it?

  - by sparc86

  The answer to my question maybe is not that hard but anyways, I do not know what to do. So, I just got in a new job in a Univerisity and I found out that the network (the LAN) is full of public IP addresses. Seriously, the whole LAN (probably more than 150 hosts) has it' own internet IP address and I don't know how to manage it. I have a very good experience using iptables (Linux firewall) in a NAT'ed environment. But then how should I proceed in an environment where all my LAN is working with a bunch of public IP addresses? Should I just use the "forward" rules and ignore the NAT rules or is there any other issue in such environment which I should take care? Can I add a firewall between the router and the LAN in order to produce packet filtering for these public IP addresses in my LAN or will this just not work? Thanks!

  Read the article

• Clearing Windows file share "memory"

  - by Tom Shaw

  I'm currently upgrading a Samba file server (from 3.0.23d to 3.4.3). I have a problem on the Windows client side: if the client was accessing a UNC path or mapped drive from the Samba server before the upgrade, then after the upgrade those paths or drives are not accessible. However, I can consistently resolve the client side problem for good by rebooting the client and then re-mapping all of the mapped drives. The problem appears to be related to the client's "memory" of the pre-upgrade Samba server, which the reboot and re-map clears. I have the same issue and same fix on Windows XP SP3 and Windows Server 2003 SP2. This question is specifically: is it possible to reproduce the benefits of the Windows reboot without actually rebooting the client? I have tried restarting various Windows services, disabling and enabling the network, logging out and back in again, but nothing except a reboot appears to do the trick.

  Read the article

• Unable to run Django on Mac OS X

  - by cybervaldez

  I'm working with a Django project on my Mac (running Leopard) and I want to show it to my team. I've already passed the neccessary port forwards from my router to my Mac's LAN IP address but it doesn't work. I've also tried running the XAMPP server since that always worked with my Windows XP computer but it still doesn't work. Whenever I type my > it's showing a Page Load Error. Is this possibly an issue with an Mac OS X configuration that I need to setup first to allow my port forwards to get in? It's my first time to do this with Mac, perhaps I need to configure something else in network preferences?

  Read the article

• Enterprise Level Monitoring Solution

  - by Garthmeister J.

  My company is currently looking to replace our current solution used for monitoring our web-based enterprise solutions for both up-time and performance. Please note this is not intended to be a network monitoring-type solution (internally we currently use Nagios). If anyone has a provider that they have had a positive experience with, it would be much appreciated. Here is a list of our requirements: • Must have a large number of probes/agents around the globe to be representative of our customer base • Must have a flexible scripting capability to automate multi-step user actions • 24 hour a day monitoring • Flexible alerting system • Report generation capability • Mimic browser specific monitoring (optional, not a must-have)

  Read the article

• Need help configuring NAT

  - by QuinnFTW

  First of all, the router I am using is a Cisco WRVS4400N. My company runs a software which handles the MySQL database of all of their products. The software now has an e-commerce module, so I have to set up a secure tunnel from our network to the server that will be hosting our e-commerce site so that when the database is updated, the site will also be updated. The technician completeing the job said there is an IP conflict, and has asked me to NAT 192.168.0.0/24 to 192.168.115.0/24. I am not really sure how to do this, and they want to charge $150 an hour to do it for me. Can anyone help?

  Read the article

• Wifi and eth behavior

  - by r00ster

  I have a wireless router 150M Wireless Lite N Router Model No. TL-WR740N / TL-WR740ND. Normally, when I'm connected to the local network using eth0 I can ping other machines by issuing ping name. When I'm connected through wifi I have to issue ping name.domain.com. The machine is only visible in intranet. How to achieve the same behavior with wifi? The second problem is, that I can not connect to some external sites through wifi but through eth everything is ok. I guess that is related to some port forwarding, but I'm not sure. How can I resolve this issue? EDIT: I'm using Linux Mint.

  Read the article

• is using Hosts for resolving a sql-server more performant?

  - by Ice

  Hi, we have a legacy application which uses a access.mdb with hundreds of ODBC-connected tables on a sql-server. the access.mdb contains nothing else than these odbc-connections. Now we consider to use a virtual sql-servername for these odbc connections and resolve it in the local hosts-file with the ip-address of the real sql-server. Like this we can easy switch between a test-sql-database server and the the server for production in changing one single entry in the hosts. EVERYTHING works fine and now comes the question: Could it be that this is more performant because there is one single point on resolving the sql-server (name or ip-address)? Is there something like a network-cache / DNS-Cache? peace Ice

  Read the article

• Windows xp media center, iTunes, Home sharing problem with app Remote and Apple tv2

  - by Amador

  Hello everybody, greetings from Mexico, sorry about my english but here it goes: I recently bought and apple tv 2nd generation it works just fine, i can see you tube videos but i cant see my library. My pc is conected to the same wi-fi than my apple tv. I have the latest software. I have my firewall off. I turned off and on my router. Search for iphone, ipad remotes on, sharing my library on my local network on, in itunes. Ive checked that my id was the same. On top of that the Remote app doesnt seem to work either. Please help, im kinda loosing my mind over this

  Read the article

• Windows 8 Hidden Downloading? Slow Internet?

  - by EApubs

  After upgrading to Windows 8, im facing a very slow download speed. My router and the NIC is working fine because on the same PC I also have Linux. In Linux, everything works fine. When checking through the task manager, it shows that the system use the full bandwidth 1Mbps even without a download. The process menu doesn't show whats taking much bandwidth. The bitdefender's firewall also shows network activity. Is there any hidden apps downloading? How to fix this?

  Read the article

• netgear GS108TV2 RSTP configuration

  - by jhowland

  I have a large set of GS108TV2 units--my goal is to set up a network which is comprised of several loops for redundancy/fault tolerance. I have a minimal 3 switch loop configured, with RSTP enabled on two ports on each switch. I have my bridge max age set to 6, and my bridge forward delay set to 4, which are the minimum values allowed. Hello time is fixed at 2 seconds. The switches respond to a cable being removed from a socket, but it takes too long. I cannot get the switch to respond to a loss of connection on one of the redundant ports in less than 20 seconds. Is there any way to configure these switches to respond faster than 20 seconds? That is unacceptable for my application. thanks in advance for any help

  Read the article

• Prompt for credentials in a batch script

  - by Inteladu

  I am trying to perform a network copy of files via a batch script. However, as usual there are some networks where the 'copy' command fails saying 'Bad username or password'. And when I try using xcopy, it never works. I have also tried using, net use \\server\ password /user:domain\username net use \\server\ipc$ /user:domain\username password But none of these work. Any ideas on how I can accomplish this? I was also wondering if it is possible to prompt the ususal Windows login dialog for this...(just an idea) Any leads on this would be highly appreciated. Thanks & Regards, inteladu

  Read the article

• What is causing my wireless problems?

  - by user34629

  I have a Dell XPS M1330, since I moved to my new house, the wireless barely works on it, my housemates report no problems, so I guess it's something to do with my laptop. It's eratic in normal mode, sometimes not working for days, usually working on-and-off, forcing me to reload pages a few times before they work, etc. It works perfectly in safe mode, the driver I'm using is the Intel PRO/Wireless 3945ABG Network Connection, version 12.4.4.5, with a date at 26/10/2009, the most recent one I could find, bluetooth is not enabled, and I'm running Vista 32-bit Home Premium, which it shipped with. I also tried disabling IPv6 and resetting the IP stack, both to no avail. Can anybody help me?

  Read the article

• Active Directory Account Always Locked

  - by Joel

  My account in the domain at work comes up locked every morning and it's turning out to be unbearable. The domain admins have no clue as to what could be causing it and therefore I must call evey morning to have my account unlocked. I normally don't log off when leaving for the day, next morning I can unlock my computer and access my workstation but when I try to do anything domain-related I realize my account is locked. This is what I've tried so far: Deleted all network drives Made sure all the servers I remotely access neither have a session with my account or a service running under my account. No service is locally running with my account in my workstation. What else can I try?

  Read the article

• Where does traffic shaping typically take place?

  - by eekmeter

  As part of upgrading our network infrastructure we are looking to traffic shape our bandwidth since we only have about 3Mb down / 1 Mb up. We're looking to prioritize it so that web browsing gets priority and in the future some VOIP might be added in as well. Internal LAN traffic doesn't need to be controlled just our outbound connection. I've been looking at Cisco hardware and it seems that several of their products do shaping at the core switch, firewall, and router level. I'm wondering where does shaping normally take place? Is it normally done at the router, core switch, or firewall?

  Read the article

• Windows 7 File Transfer Speed over Gigabit is slow

  - by Adam Haile

  I've got windows 7 pro running on my file server and my main desktop. Each has a gigabit network connection and I'm connected to a gigabit switch. However, when trying to copy some large files, it's running pretty slow at a measly 12-15 MB/s The data is coming from a 7200RPM SATA drive (which I think should be good for almost 150MB/s) and going to a Drobo on the server connected via FireWire 800, so I can't think of any bottlenecks I might have in the hardware. But TeraCopy still says it's only going at 12-15 MB/s What else could be wrong here?

  Read the article

• Web map services displaying poorly

  - by user29261

  Web map services no longer display correctly in ArcGIS and Google Earth - no one else on network is experiencing these. Using windows 7 OS. These problem began abruptly (1 day they were working, the next they were not). Specific problems include not displaying at all; correct display on 10% of the monitor and repeating lines of coloured squiggles and text on the remaining 90%; and small, widely spaced, pixels in place of colour fill. Links where this occurs: arcgis http://wms.ess-ws.nrcan.gc.ca/wms/toporama_en Google earth http://openmaps.gov.bc.ca/kml/BCGov_Web_Map_Library.kml I can't pinpoint any changes to the computer setup which may have prompted this, however, adding arcgis 10.1 SP 1 occured around the same time. Probably just a coincidence. Anyone had similar problems? or solutions to these? Thanks for any thoughts. Jim

  Read the article

• DHCP server can't see other machines

  - by William

  Hi, I setup a private network from virtual machines and one of the machines is the DHCP server for the group. I want to specify a next-server for the DHCP server but I'm having trouble connecting to any of the machines that I lease IPs to. I'm just trying to do a simple ping/ssh to 10.0.0.252 (a machine with a lease) but it doesn't seem to respond. Any advice? I'm assuming I need to be able to connect to my next-server but maybe I'm wrong. Thanks.

  Read the article

• And the Winner Is ...

  - by Oracle OpenWorld Blog Team

  If you know excellent Oracle technologists, now's your chance to nominate them for an award. by Karen Shamban It’s possible to win an Oracle Excellence Award in one of 12 categories this year—nominations are open now through July 17, 2012. Winning customers and partners will be hosted at Oracle OpenWorld or JavaOne 2012, where they can meet with Oracle executives, network with peers, and be featured in an upcoming edition of an Oracle publication such as Oracle Magazine. This year’s Oracle Excellence Award categories are: •    CIO of the Year•    Database Administrator of the Year•    Eco-Enterprise Innovation•    Java Business Innovation•    Leadership•    Oracle Fusion Middleware Innovation•    Proactive Support Champion–Global•    Specialized Partner of the Year–Europe, Middle East, and Africa•    Specialized Partner of the Year–Global•    Specialized Partner of the Year–North America•    Technologist of the Year Learn more about each award and nominate a deserving candidate now! Go to the Oracle Excellence Awards information page for details.

  Read the article

• Cannot ping a VM from a Hyper-V host

  - by user1688175

  I am facing a weird situation in my network environment. My infrastructure looks like this: I have a D-LINK DIR-635 acting as my default gateway (192.168.0.1) A physical Windows 2012 Server (192.168.0.10) with the following roles: DHCP, DNS, AD DS and Hyper-V. A virtual Windows 2012 Server (192.168.0.50) which I intent to use as an IIS server (Role is not deployed yet). My virtual machine was able to get an IP address from the DHCP server and is working perfectly (I can ping the default gateway [by IP, FQDN or DNS Alias], the Hyper-V host and any site on the Internet (CNN.com for example). However I cannot ping the VM from my host. It says: Request Timed Out. Do you guys know what I might be doing wrong? Any support is appreciated! Thanks!

  Read the article

• In-house Trusted Certificate

  - by MrEdmundo

  Hi there I'm a developer looking at introducing ClickOnce deployment for an internal .NET Winforms application that will be distributed via the corporate network. Now I would like to deploy this application under the full trust model however in order for that to happen I need to sign the software with a certificate. I can do that with a "test" certificate that has no information of the publisher etc, however that means an extra step will occur on the users workstation where they will have to confirm that the software is OK. So what I want to know is. is there a way I can get my IT Infrastructure guys to create me a an "internal" certificate from the domains Certificate Authority, or do I have to go and pay for a certificate from somebody like VeriSign? Thanks

  Read the article

• Issues connecting VMWare VM to Windows 7 (host)

  - by MasterGberry

  I am on windows 7 trying to figure out why i cannot ping my computer or my VM from the other one, yet I am able to ping the router on both and other computers on the network. My desktop is running windows 7 64 bit and my vm is running CentOS 64 bit (which is what I use to test my web server stuff). At my school the VM has a dedicated IP and i don't have this issue, but I am home now and having issues trying to set this up behind my dumb router...I had already tried changing the VINC (i believe) to hide the vmnet1 and vmnet8 connections from the windows firewall and this seemed to have worked for like 5 minutes and then stopped... Any ideas? Thanks

  Read the article

• syslog facilities

  - by user65971

  Hi, I have an application (in java) running in a windows PC and I want to send logging messages to a syslog server running in a linux box somewhere in the network. The problem I have is, that it is not clear to me what should I use as facility in this case. I.e. can I (/should I) send the logging info as one of LOCAL0-LOCAL7? Or are they not supposed to be used by remote applications? It is not clear to me if they are usable or not. Should I use USER instead? Could anyone help me on this please? Thank you

  Read the article

< Previous Page | 982 983 984 985 986 987 988 989 990 991 992 993  | Next Page >