Search Results

Search found 24931 results on 998 pages for 'information visualization'.

Page 988/998 | < Previous Page | 984 985 986 987 988 989 990 991 992 993 994 995  | Next Page >

• Failing Sata HDD

  - by DaveCol

  I think my HDD is fried... Could someone confirm or help me restore it? I was using Hardware RAID 1 Configuration [2 x 160GB SATA HDD] on a CentOS 4 Installation. All of a sudden I started seeing bad sectors on the second HDD which stopped being mirrored. I have removed the RAID array and have tested with SMART which showed the following error: 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 I have no clue what this means, or if I can recover from it. Could someone give me some ideas on how to fix this, or what HDD to get to replace this? Complete SMART report: Smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: GB0160CAABV Serial Number: 6RX58NAA Firmware Version: HPG1 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue Oct 19 13:42:42 2010 COT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0002 097 097 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 100 100 020 Pre-fail Always - 152 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 214 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 73109713 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15133 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail Always - 154 184 Unknown_Attribute 0x0032 038 038 000 Old_age Always - 62 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 189 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x001a 061 055 000 Old_age Always - 656408615 194 Temperature_Celsius 0x0000 039 045 000 Old_age Offline - 39 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x0032 070 059 000 Old_age Always - 12605265 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 62 SMART Error Log Version: 1 ATA Error Count: 4645 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4645 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 7b 86 b1 ea 00 00:38:52.796 READ DMA ec 03 45 00 00 00 a0 00 00:38:52.796 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:52.794 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 04 79 86 b1 ea 00 00:38:49.935 READ DMA Error 4644 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 04 79 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:49.935 READ DMA Error 4643 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4642 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4641 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15131 - # 2 Short offline Completed without error 00% 15131 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• dpkg: warning: files list file for package 'x' missing

  - by Mark

  I get this warning for several packages every time I install any package or perform apt-get upgrade. Not sure what is causing it; it's a fresh Debian install on my OpenVZ server and I haven't changed any dpkg settings. Here's an example: root@debian:~# apt-get install cowsay Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: filters The following NEW packages will be installed: cowsay 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 21.9 kB of archives. After this operation, 91.1 kB of additional disk space will be used. Get:1 http://ftp.us.debian.org/debian/ unstable/main cowsay all 3.03+dfsg1-4 [21.9 kB] Fetched 21.9 kB in 0s (70.2 kB/s) Selecting previously unselected package cowsay. dpkg: warning: files list file for package 'libssh2-1:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libkrb5-3:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libwrap0:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libcap2:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libpam-ck-connector:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libc6:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libtalloc2:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libselinux1:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libp11-kit0:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libavahi-client3:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libbz2-1.0:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libpcre3:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libgpm2:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libgnutls26:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libavahi-common3:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libcroco3:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'liblzma5:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libpaper1:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libsensors4:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libbsd0:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libavahi-common-data:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libss2:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libblkid1:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libslang2:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libacl1:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libcomerr2:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libkrb5support0:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'e2fslibs:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'librtmp0:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libidn11:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libpcap0.8:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libattr1:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libdevmapper1.02.1:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'odbcinst1debian2:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libexpat1:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libltdl7:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libkeyutils1:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libcups2:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libsqlite3-0:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libck-connector0:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'zlib1g:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libnl1:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libfontconfig1:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libudev0:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libsepol1:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libmagic1:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libk5crypto3:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libunistring0:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libgpg-error0:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libusb-0.1-4:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libpam0g:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libpopt0:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libgssapi-krb5-2:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libgeoip1:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libcurl3-gnutls:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libtasn1-3:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libuuid1:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libgcrypt11:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libgdbm3:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libdbus-1-3:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libsysfs2:amd64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libfreetype6:amd64' missing; assuming package has no files currently installed (Reading database ... 21908 files and directories currently installed.) Unpacking cowsay (from .../cowsay_3.03+dfsg1-4_all.deb) ... Processing triggers for man-db ... Setting up cowsay (3.03+dfsg1-4) ... root@debian:~# Everything works fine, but these warning messages are pretty annoying. Does anyone know how I can fix this?

  Read the article

• socket connection failed, telnet OK

  - by cf16

  my problem is that I can't connect two comps through socket (windows xp and windows7) although the server created with socket is listening and I can telnet it. It receives then information and does what should be done, but if I run the corresponding socket client I get error 10061. Moreover I am behind firewall - these two comps are running within my LAN, the windows firewalls are turned off, comp1: 192.168.1.2 port 12345 comp1: 192.168.1.6 port 12345 router: 192.168.1.1 Maybe port forwarding could help? But most important for me is to answer why Sockets fail if telnet works fine. client: int main(){ // Initialize Winsock. WSADATA wsaData; int iResult = WSAStartup(MAKEWORD(2,2), &wsaData); if (iResult != NO_ERROR) printf("Client: Error at WSAStartup().\n"); else printf("Client: WSAStartup() is OK.\n"); // Create a socket. SOCKET m_socket; m_socket = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); if (m_socket == INVALID_SOCKET){ printf("Client: socket() - Error at socket(): %ld\n", WSAGetLastError()); WSACleanup(); return 7; }else printf("Client: socket() is OK.\n"); // Connect to a server. sockaddr_in clientService; clientService.sin_family = AF_INET; //clientService.sin_addr.s_addr = inet_addr("77.64.240.156"); clientService.sin_addr.s_addr = inet_addr("192.168.1.5"); //clientService.sin_addr.s_addr = inet_addr("87.207.222.5"); clientService.sin_port = htons(12345); if (connect(m_socket, (SOCKADDR*)&clientService, sizeof(clientService)) == SOCKET_ERROR){ printf("Client: connect() - Failed to connect.\n"); wprintf(L"connect function failed with error: %ld\n", WSAGetLastError()); iResult = closesocket(m_socket); if (iResult == SOCKET_ERROR) wprintf(L"closesocket function failed with error: %ld\n", WSAGetLastError()); WSACleanup(); return 6; } // Send and receive data int bytesSent; int bytesRecv = SOCKET_ERROR; // Be careful with the array bound, provide some checking mechanism char sendbuf[200] = "Client: Sending some test string to server..."; char recvbuf[200] = ""; bytesSent = send(m_socket, sendbuf, strlen(sendbuf), 0); printf("Client: send() - Bytes Sent: %ld\n", bytesSent); while(bytesRecv == SOCKET_ERROR){ bytesRecv = recv(m_socket, recvbuf, 32, 0); if (bytesRecv == 0 || bytesRecv == WSAECONNRESET){ printf("Client: Connection Closed.\n"); break; }else printf("Client: recv() is OK.\n"); if (bytesRecv < 0) return 0; else printf("Client: Bytes received - %ld.\n", bytesRecv); } system("pause"); return 0; } server: int main(){ WORD wVersionRequested; WSADATA wsaData={0}; int wsaerr; // Using MAKEWORD macro, Winsock version request 2.2 wVersionRequested = MAKEWORD(2, 2); wsaerr = WSAStartup(wVersionRequested, &wsaData); if (wsaerr != 0){ /* Tell the user that we could not find a usable WinSock DLL.*/ printf("Server: The Winsock dll not found!\n"); return 0; }else{ printf("Server: The Winsock dll found!\n"); printf("Server: The status: %s.\n", wsaData.szSystemStatus); } /* Confirm that the WinSock DLL supports 2.2.*/ /* Note that if the DLL supports versions greater */ /* than 2.2 in addition to 2.2, it will still return */ /* 2.2 in wVersion since that is the version we */ /* requested. */ if (LOBYTE(wsaData.wVersion) != 2 || HIBYTE(wsaData.wVersion) != 2 ){ /* Tell the user that we could not find a usable WinSock DLL.*/ printf("Server: The dll do not support the Winsock version %u.%u!\n", LOBYTE(wsaData.wVersion), HIBYTE(wsaData.wVersion)); WSACleanup(); return 0; }else{ printf("Server: The dll supports the Winsock version %u.%u!\n", LOBYTE(wsaData.wVersion), HIBYTE(wsaData.wVersion)); printf("Server: The highest version this dll can support: %u.%u\n", LOBYTE(wsaData.wHighVersion), HIBYTE(wsaData.wHighVersion)); } //////////Create a socket//////////////////////// //Create a SOCKET object called m_socket. SOCKET m_socket; // Call the socket function and return its value to the m_socket variable. // For this application, use the Internet address family, streaming sockets, and the TCP/IP protocol. // using AF_INET family, TCP socket type and protocol of the AF_INET - IPv4 m_socket = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); // Check for errors to ensure that the socket is a valid socket. if (m_socket == INVALID_SOCKET){ printf("Server: Error at socket(): %ld\n", WSAGetLastError()); WSACleanup(); //return 0; }else{ printf("Server: socket() is OK!\n"); } ////////////////bind////////////////////////////// // Create a sockaddr_in object and set its values. sockaddr_in service; // AF_INET is the Internet address family. service.sin_family = AF_INET; // "127.0.0.1" is the local IP address to which the socket will be bound. service.sin_addr.s_addr = htons(INADDR_ANY);//inet_addr("127.0.0.1");//htons(INADDR_ANY); //inet_addr("192.168.1.2"); // 55555 is the port number to which the socket will be bound. // using the htons for big-endian service.sin_port = htons(12345); // Call the bind function, passing the created socket and the sockaddr_in structure as parameters. // Check for general errors. if (bind(m_socket, (SOCKADDR*)&service, sizeof(service)) == SOCKET_ERROR){ printf("Server: bind() failed: %ld.\n", WSAGetLastError()); closesocket(m_socket); //return 0; }else{ printf("Server: bind() is OK!\n"); } // Call the listen function, passing the created socket and the maximum number of allowed // connections to accept as parameters. Check for general errors. if (listen(m_socket, 1) == SOCKET_ERROR) printf("Server: listen(): Error listening on socket %ld.\n", WSAGetLastError()); else{ printf("Server: listen() is OK, I'm waiting for connections...\n"); } // Create a temporary SOCKET object called AcceptSocket for accepting connections. SOCKET AcceptSocket; // Create a continuous loop that checks for connections requests. If a connection // request occurs, call the accept function to handle the request. printf("Server: Waiting for a client to connect...\n"); printf("***Hint: Server is ready...run your client program...***\n"); // Do some verification... while (1){ AcceptSocket = SOCKET_ERROR; while (AcceptSocket == SOCKET_ERROR){ AcceptSocket = accept(m_socket, NULL, NULL); } // else, accept the connection... note: now it is wrong implementation !!!!!!!! !! !! (only 1 char) // When the client connection has been accepted, transfer control from the // temporary socket to the original socket and stop checking for new connections. printf("Server: Client Connected! Mammamija. \n"); m_socket = AcceptSocket; char recvBuf[200]=""; char * rc=recvBuf; int bytesRecv=recv(m_socket,recvBuf,64,0); if(bytesRecv==0 || bytesRecv==WSAECONNRESET){ cout<<"server: connection closed.\n"; }else{ cout<<"server: recv() is OK.\n"; if(bytesRecv<0){ return 0; }else{ printf("server: bytes received: %ld.\n",recvBuf); } }

  Read the article

• Linux (NAS) Permissions problem (Permission Denied)

  - by calumbrodie

  This is probably easier to show than to explain... -bash-3.2$ id uid=501(admin) gid=503(admin) groups=100(users),501(admins),503(admin) -bash-3.2$ groups admin users admins -bash-3.2$ ls -l total 8 drwxrwxrwx 78 admin www 4096 Dec 9 09:02 Inbox drwxrwxrwx 21 admin www 4096 Dec 8 21:45 Movies drwxrwx--- 3 admin www 52 Dec 9 07:57 TV -bash-3.2$ cd Movies -bash-3.2$ ls -l total 20 drwxrwx--- 7 admin www 4096 Dec 8 00:04 Action drwxrwx--- 6 admin www 4096 Dec 8 00:05 Animation drwxrwx--- 4 admin www 4096 Dec 8 00:17 Comedy drwxrwx--- 4 admin www 4096 Dec 8 00:14 Drama drwxrwx--- 4 admin www 4096 Dec 8 00:14 Family drwxrwx--- 6 admin www 58 Dec 6 19:10 Foreign Language drwxrwx--- 2 admin www 31 Dec 7 23:58 Horror drwxrwx--- 3 admin www 50 Dec 8 00:15 Science Fiction drwxrwx--- 2 admin www 6 Dec 8 00:16 Thriller -bash-3.2$ cd ../Inbox -bash: cd: ../Inbox: Permission denied Filesystem is XFS. Are there permissions on the directories that ls -l wouldn't show? I'm the owner of all directories and files inside them. I can sudo to modify the file permissions or view the contents of the folders but I need them to be accessible by 'admin'. Any ideas? I'll be checking the question regularly so let me know if I need to update this with more information. Thanks Edit : Added strace execve("/bin/ls", ["ls", "Inbox"], [/* 21 vars */]) = 0 brk(0) = 0x26000 uname({sys="Linux", node="axentraserver.the-brodie-stora.mystora.com", ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001c000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=17972, ...}) = 0 mmap2(NULL, 17972, PROT_READ, MAP_PRIVATE, 3, 0) = 0x4001d000 close(3) = 0 open("/lib/librt.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0P\25\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=39776, ...}) = 0 mmap2(NULL, 57816, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40025000 mprotect(0x4002b000, 28672, PROT_NONE) = 0 mmap2(0x40032000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5) = 0x40032000 close(3) = 0 open("/lib/libacl.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\0\24\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=134375, ...}) = 0 mmap2(NULL, 54368, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40034000 mprotect(0x4003a000, 28672, PROT_NONE) = 0 mmap2(0x40041000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5) = 0x40041000 close(3) = 0 open("/lib/libselinux.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\2147\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=297439, ...}) = 0 mmap2(NULL, 117504, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40042000 mprotect(0x40056000, 28672, PROT_NONE) = 0 mmap2(0x4005d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13) = 0x4005d000 close(3) = 0 open("/lib/libgcc_s.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\10\"\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=43164, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40022000 mmap2(NULL, 74572, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x4005f000 mprotect(0x4006a000, 28672, PROT_NONE) = 0 mmap2(0x40071000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xa) = 0x40071000 close(3) = 0 open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0XI\1\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1517948, ...}) = 0 mmap2(NULL, 1245628, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40072000 mprotect(0x40195000, 32768, PROT_NONE) = 0 mmap2(0x4019d000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x123) = 0x4019d000 mmap2(0x401a0000, 8636, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x401a0000 close(3) = 0 open("/lib/libpthread.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\230A\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=121044, ...}) = 0 mmap2(NULL, 115184, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x401a3000 mprotect(0x401b5000, 28672, PROT_NONE) = 0 mmap2(0x401bc000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11) = 0x401bc000 mmap2(0x401be000, 4592, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x401be000 close(3) = 0 open("/lib/libattr.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\364\f\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=40571, ...}) = 0 mmap2(NULL, 45512, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x401c0000 mprotect(0x401c3000, 32768, PROT_NONE) = 0 mmap2(0x401cb000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3) = 0x401cb000 close(3) = 0 open("/lib/libdl.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\254\10\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=15344, ...}) = 0 mmap2(NULL, 41116, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x401cc000 mprotect(0x401ce000, 28672, PROT_NONE) = 0 mmap2(0x401d5000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0x401d5000 close(3) = 0 open("/lib/libsepol.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\330/\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=228044, ...}) = 0 mmap2(NULL, 301748, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x401d7000 mprotect(0x4020f000, 28672, PROT_NONE) = 0 mmap2(0x40216000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x37) = 0x40216000 mmap2(0x40217000, 39604, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40217000 close(3) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40221000 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40222000 set_tls(0x40221d00, 0x40221d00, 0x40024000, 0x402223e8, 0x41) = 0 mprotect(0x401d5000, 4096, PROT_READ) = 0 mprotect(0x401bc000, 4096, PROT_READ) = 0 mprotect(0x4019d000, 8192, PROT_READ) = 0 mprotect(0x4005d000, 4096, PROT_READ) = 0 mprotect(0x40032000, 4096, PROT_READ) = 0 mprotect(0x40023000, 4096, PROT_READ) = 0 munmap(0x4001d000, 17972) = 0 set_tid_address(0x402218a8) = 9539 set_robust_list(0x402218b0, 0xc) = 0 rt_sigaction(SIGRTMIN, {0x401a6d90, [], SA_SIGINFO|0x4000000}, NULL, 8) = 0 rt_sigaction(SIGRT_1, {0x401a6c64, [], SA_RESTART|SA_SIGINFO|0x4000000}, NULL, 8) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0 brk(0) = 0x26000 brk(0x47000) = 0x47000 open("/proc/mounts", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000 read(3, "rootfs / rootfs rw 0 0\nubi0:root"..., 1024) = 1024 read(3, "fs.xino,noplink,create=mfs,sum,b"..., 1024) = 428 read(3, "", 1024) = 0 close(3) = 0 munmap(0x4001d000, 4096) = 0 access("/etc/selinux/", F_OK) = 0 open("/etc/selinux/config", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory) ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(1, TIOCGWINSZ, {ws_row=52, ws_col=153, ws_xpixel=918, ws_ypixel=728}) = 0 stat64("Inbox", {st_mode=S_IFDIR|0777, st_size=4096, ...}) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/nsswitch.conf", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1696, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000 read(3, "#\n# /etc/nsswitch.conf\n#\n# An ex"..., 4096) = 1696 read(3, "", 4096) = 0 close(3) = 0 munmap(0x4001d000, 4096) = 0 open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=17972, ...}) = 0 mmap2(NULL, 17972, PROT_READ, MAP_PRIVATE, 3, 0) = 0x4001d000 close(3) = 0 open("/lib/libnss_files.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\304\27\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=49256, ...}) = 0 mmap2(NULL, 70316, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40223000 mprotect(0x4022c000, 28672, PROT_NONE) = 0 mmap2(0x40233000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8) = 0x40233000 close(3) = 0 mprotect(0x40233000, 4096, PROT_READ) = 0 munmap(0x4001d000, 17972) = 0 open("/etc/passwd", O_RDONLY) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=1661, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 1661 close(3) = 0 munmap(0x4001d000, 4096) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/group", O_RDONLY) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=700, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000 read(3, "root:x:0:root\nbin:x:1:root,bin,d"..., 4096) = 700 close(3) = 0 munmap(0x4001d000, 4096) = 0 open("Inbox", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = -1 EACCES (Permission denied) write(2, "ls: ", 4ls: ) = 4 write(2, "Inbox", 5Inbox) = 5 write(2, ": Permission denied", 19: Permission denied) = 19 write(2, "\n", 1 ) = 1 close(1) = 0 exit_group(2) = ? 2nd edit: Elaboration for Mike. The Inbox sits at the following location /home/admin/MyLibrary/MyVideos/Inbox /home/admin/MyLibrary/MyVideos/Movies The system is a Netgear Stora NAS box that I have root access to. The /home/ folder is mounted as an smb share on various computers around the house. The folder /Inbox cannot be opened on any of those machines (they all connect as 'admin'). When I ssh into the box using the 'admin' credentials I am also unable to access the folder. The folder was created via a Web Admin page hosted on the NAS. The user/group for the Inbox folder was previously apache:www (expected as this folder was created by the web application), but I chmod/chowned the folder as the root user in an attempt to grant the admin user (therefore the rest of the connected machines) access to the files. Sorry for not including this earlier, I wasn't sure if it was relevant and didn't want to confuse the situation. -Thanks 3rd Edit Sorry again - It looks like this NAS is running some custom version of Red Hat, not Debian as previously stated - I'm not sure if this makes a difference

  Read the article

• Why load increase ,ssd iops increase but cpu iowait decrease?

  - by mq44944

  There is a strange thing on my server which has a mysql running on it. The QPS is more than 4000 but TPS is less than 20. The server load is more than 80 and cpu usr is more than 86% but iowait is less than 8%. The disk iops is more than 16000 and util of disk is more than 99%. When the QPS decreases, the load decreases, the cpu iowait increases. I can't catch this! root@mypc # dmidecode | grep "Product Name" Product Name: PowerEdge R510 Product Name: 084YMW root@mypc # megacli -PDList -aALL |grep "Inquiry Data" Inquiry Data: SEAGATE ST3600057SS ES656SL316PT Inquiry Data: SEAGATE ST3600057SS ES656SL30THV Inquiry Data: ATA INTEL SSDSA2CW300362CVPR201602A6300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR2044037K300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR204402PX300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR204403WN300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR202000HU300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR202001E7300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR204402WE300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR204404E5300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR204401QF300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR20450001300EGN the mysql data files lie on the ssd disks which are organizaed using RAID 10. root@mypc # megacli -LDInfo -L1 -a0 Adapter 0 -- Virtual Drive Information: Virtual Disk: 1 (Target Id: 1) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:1427840MB State: Optimal Stripe Size: 64kB Number Of Drives:2 Span Depth:5 Default Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Exit Code: 0x00 -------- -----load-avg---- ---cpu-usage--- ---swap--- -------------------------io-usage----------------------- -QPS- -TPS- -Hit%- time | 1m 5m 15m |usr sys idl iow| si so| r/s w/s rkB/s wkB/s queue await svctm %util| ins upd del sel iud| lor hit| 09:05:29|79.80 64.49 42.00| 82 7 6 5| 0 0|16421.1 10.6262705.9 85.2 8.3 0.5 0.1 99.5| 0 0 0 3968 0| 495482 96.58| 09:05:30|79.80 64.49 42.00| 79 7 8 6| 0 0|15907.4 230.6254409.7 6357.5 8.4 0.5 0.1 98.5| 0 0 0 4195 0| 496434 96.68| 09:05:31|81.34 65.07 42.31| 81 7 7 5| 0 0|16198.7 8.6259029.2 99.8 8.1 0.5 0.1 99.3| 0 0 0 4220 0| 508983 96.70| 09:05:32|81.34 65.07 42.31| 82 7 5 5| 0 0|16746.6 8.7267853.3 92.4 8.5 0.5 0.1 99.4| 0 0 0 4084 0| 503834 96.54| 09:05:33|81.34 65.07 42.31| 81 7 6 5| 0 0|16498.7 9.6263856.8 92.3 8.0 0.5 0.1 99.3| 0 0 0 4030 0| 507051 96.60| 09:05:34|81.34 65.07 42.31| 80 8 7 6| 0 0|16328.4 11.5261101.6 95.8 8.1 0.5 0.1 98.3| 0 0 0 4119 0| 504409 96.63| 09:05:35|81.31 65.33 42.52| 82 7 6 5| 0 0|16374.0 8.7261921.9 92.5 8.1 0.5 0.1 99.7| 0 0 0 4127 0| 507279 96.66| 09:05:36|81.31 65.33 42.52| 81 8 6 5| 0 0|16496.2 8.6263832.0 84.5 8.5 0.5 0.1 99.2| 0 0 0 4100 0| 505054 96.59| 09:05:37|81.31 65.33 42.52| 82 8 6 4| 0 0|16239.4 9.6259768.8 84.3 8.0 0.5 0.1 99.1| 0 0 0 4273 0| 510621 96.72| 09:05:38|81.31 65.33 42.52| 81 7 6 5| 0 0|16349.6 8.7261439.2 81.4 8.2 0.5 0.1 98.9| 0 0 0 4171 0| 510145 96.67| 09:05:39|81.31 65.33 42.52| 82 7 6 5| 0 0|16116.8 8.7257667.6 96.5 8.0 0.5 0.1 99.1| 0 0 0 4348 0| 513093 96.74| 09:05:40|79.60 65.24 42.61| 79 7 7 7| 0 0|16154.2 242.9258390.4 6388.4 8.5 0.5 0.1 99.0| 0 0 0 4033 0| 507244 96.70| 09:05:41|79.60 65.24 42.61| 79 7 8 6| 0 0|16583.1 21.2265129.6 173.5 8.2 0.5 0.1 99.1| 0 0 0 3995 0| 501474 96.57| 09:05:42|79.60 65.24 42.61| 81 8 6 5| 0 0|16281.0 9.7260372.2 69.5 8.3 0.5 0.1 98.7| 0 0 0 4221 0| 509322 96.70| 09:05:43|79.60 65.24 42.61| 80 7 7 6| 0 0|16355.3 8.7261515.5 104.3 8.2 0.5 0.1 99.6| 0 0 0 4087 0| 502052 96.62| -------- -----load-avg---- ---cpu-usage--- ---swap--- -------------------------io-usage----------------------- -QPS- -TPS- -Hit%- time | 1m 5m 15m |usr sys idl iow| si so| r/s w/s rkB/s wkB/s queue await svctm %util| ins upd del sel iud| lor hit| 09:05:44|79.60 65.24 42.61| 83 7 5 4| 0 0|16469.4 11.6263387.0 138.8 8.2 0.5 0.1 98.7| 0 0 0 4292 0| 509979 96.65| 09:05:45|79.07 65.37 42.77| 80 7 6 6| 0 0|16659.5 9.7266478.7 85.0 8.4 0.5 0.1 98.5| 0 0 0 3899 0| 496234 96.54| 09:05:46|79.07 65.37 42.77| 78 7 7 8| 0 0|16752.9 8.7267921.8 97.1 8.4 0.5 0.1 98.9| 0 0 0 4126 0| 508300 96.57| 09:05:47|79.07 65.37 42.77| 82 7 6 5| 0 0|16657.2 9.6266439.3 84.3 8.3 0.5 0.1 98.9| 0 0 0 4086 0| 502171 96.57| 09:05:48|79.07 65.37 42.77| 79 8 6 6| 0 0|16814.5 8.7268924.1 77.6 8.5 0.5 0.1 99.0| 0 0 0 4059 0| 499645 96.52| 09:05:49|79.07 65.37 42.77| 81 7 6 5| 0 0|16553.0 6.8264708.6 42.5 8.3 0.5 0.1 99.4| 0 0 0 4249 0| 501623 96.60| 09:05:50|79.63 65.71 43.01| 79 7 7 7| 0 0|16295.1 246.9260475.0 6442.4 8.7 0.5 0.1 99.1| 0 0 0 4231 0| 511032 96.70| 09:05:51|79.63 65.71 43.01| 80 7 6 6| 0 0|16568.9 8.7264919.7 104.7 8.3 0.5 0.1 99.7| 0 0 0 4272 0| 517177 96.68| 09:05:53|79.63 65.71 43.01| 79 7 7 6| 0 0|16539.0 8.6264502.9 87.6 8.4 0.5 0.1 98.9| 0 0 0 3992 0| 496728 96.52| 09:05:54|79.63 65.71 43.01| 79 7 7 7| 0 0|16527.5 11.6264363.6 92.6 8.5 0.5 0.1 98.8| 0 0 0 4045 0| 502944 96.59| 09:05:55|79.63 65.71 43.01| 80 7 7 6| 0 0|16374.7 12.5261687.2 134.9 8.6 0.5 0.1 99.2| 0 0 0 4143 0| 507006 96.66| 09:05:56|76.05 65.20 42.96| 77 8 8 8| 0 0|16464.9 9.6263314.3 111.9 8.5 0.5 0.1 98.9| 0 0 0 4250 0| 505417 96.64| 09:05:57|76.05 65.20 42.96| 79 7 6 7| 0 0|16460.1 8.8263283.2 93.4 8.3 0.5 0.1 98.8| 0 0 0 4294 0| 508168 96.66| 09:05:58|76.05 65.20 42.96| 80 7 7 7| 0 0|16176.5 9.6258762.1 127.3 8.3 0.5 0.1 98.9| 0 0 0 4160 0| 509349 96.72| 09:05:59|76.05 65.20 42.96| 75 7 9 10| 0 0|16522.0 10.7264274.6 93.1 8.6 0.5 0.1 97.5| 0 0 0 4034 0| 492623 96.51| -------- -----load-avg---- ---cpu-usage--- ---swap--- -------------------------io-usage----------------------- -QPS- -TPS- -Hit%- time | 1m 5m 15m |usr sys idl iow| si so| r/s w/s rkB/s wkB/s queue await svctm %util| ins upd del sel iud| lor hit| 09:06:00|76.05 65.20 42.96| 79 7 7 7| 0 0|16369.6 21.2261867.3 262.5 8.4 0.5 0.1 98.9| 0 0 0 4305 0| 494509 96.59| 09:06:01|75.33 65.23 43.09| 73 6 9 12| 0 0|15864.0 209.3253685.4 6238.0 10.0 0.6 0.1 98.7| 0 0 0 3913 0| 483480 96.62| 09:06:02|75.33 65.23 43.09| 73 7 8 12| 0 0|15854.7 12.7253613.2 93.6 11.0 0.7 0.1 99.0| 0 0 0 4271 0| 483771 96.64| 09:06:03|75.33 65.23 43.09| 75 7 9 9| 0 0|16074.8 8.7257104.3 81.7 8.1 0.5 0.1 98.5| 0 0 0 4060 0| 480701 96.55| 09:06:04|75.33 65.23 43.09| 76 7 8 9| 0 0|16221.7 9.7259500.1 139.4 8.1 0.5 0.1 97.6| 0 0 0 3953 0| 486774 96.56| 09:06:05|74.98 65.33 43.24| 78 7 8 8| 0 0|16330.7 8.7261166.5 85.3 8.2 0.5 0.1 98.5| 0 0 0 3957 0| 481775 96.53| 09:06:06|74.98 65.33 43.24| 75 7 9 9| 0 0|16093.7 11.7257436.1 93.7 8.2 0.5 0.1 99.2| 0 0 0 3938 0| 489251 96.60| 09:06:07|74.98 65.33 43.24| 75 7 5 13| 0 0|15758.9 19.2251989.4 188.2 14.7 0.9 0.1 99.7| 0 0 0 4140 0| 494738 96.70| 09:06:08|74.98 65.33 43.24| 69 7 10 15| 0 0|16166.3 8.7258474.9 81.2 8.9 0.5 0.1 98.7| 0 0 0 3993 0| 487162 96.58| 09:06:09|74.98 65.33 43.24| 74 7 9 10| 0 0|16071.0 8.7257010.9 93.3 8.2 0.5 0.1 99.2| 0 0 0 4098 0| 491557 96.61| 09:06:10|70.98 64.66 43.14| 71 7 9 12| 0 0|15549.6 216.1248701.1 6188.7 8.3 0.5 0.1 97.8| 0 0 0 3879 0| 480832 96.66| 09:06:11|70.98 64.66 43.14| 71 7 10 13| 0 0|16233.7 22.4259568.1 257.1 8.2 0.5 0.1 99.2| 0 0 0 4088 0| 493200 96.62| 09:06:12|70.98 64.66 43.14| 78 7 8 7| 0 0|15932.4 10.6254779.5 108.1 8.1 0.5 0.1 98.6| 0 0 0 4168 0| 489838 96.63| 09:06:13|70.98 64.66 43.14| 71 8 9 12| 0 0|16255.9 11.5259902.3 103.9 8.3 0.5 0.1 98.0| 0 0 0 3874 0| 481246 96.52| 09:06:14|70.98 64.66 43.14| 60 6 16 18| 0 0|15621.0 9.7249826.1 81.9 8.0 0.5 0.1 99.3| 0 0 0 3956 0| 480278 96.65|

  Read the article

• 2-Bay External HDD Enclosure in JBOD mode fails to detect both drives (Linux & Windows)

  - by mgc8888

  I recently purchased a couple of USB 3.0 External HDD Enclosures to use for storage and backup; the idea was to have one act as backup to the other, with 4 x 3TB drives in total. However, the second drive in each is not accessible in either Linux nor Windows, and I could not determine the reason. 1. Situation The two enclosures are slightly different (couldn't find them in stock at the same time) yet from many little details appear to be the same Chinese base design with a tweaked outer shell. The models are: Sharkoon 2-Bay RAID Box Fantec MR-35DU3 The drives are Seagate 3TB Barracuda ST33000651AS, firmware CC44, all identical. From reading manuals and online sources, I determined that JBOD would be the optimal setup for my needs -- addressing the two drives separately in each enclosure would be important, making it easy to swap drives and mix&match them if needed; all the other modes implied the controller doing a combination of the drives. The software used was Debian GNU/Linux - testing/wheezy - kernel 2.6.39-2 and Windows 7 Ultimate. 2. Description of the problem Now, here comes the problem: every time I connect either of the enclosures to a PC using the supplied cable (tried a different one as well), only the HDD in the top bay is readable, the one below is detected yet errors out in various ways. According to the manuals, it should not happen: in JBOD, the system should be able to "see" two separate drives upon connection. This happens with both enclosures and any combination of HDDs (i.e. if I swap them, the same thing happens), so the HDDs are good and I think so are the enclosures (two different companies making similar products that failed in an identical fashion would be very unlikely). The top HDD can be used fine every time, I actually tried a speed test from Linux and got about 150MiB/s reads, so all is working as it should; the one below refuses to work every time. So the failure is consistent. To make sure this was not some obscure Linux bug, I tried the same under Windows 7, and the system also only created one drive letter for a drive of 3TB size (so it was only seeing one instead of both). Placing an older, known good, 2TB drive in the top bay made that the one recognised, so we have the same issue under Windows as well. Log entries under Linux (tested here with a 3TB and a 2TB drive so I could differentiate them; either one works in the top enclosure, in the test setup the 3TB one is on top). You can see them being detected, the top one is ok, but for the bottom one only errors: Jul 19 23:28:15 media kernel: [260150.582436] usb 6-1: New USB device found, idVendor=1ca1, idProduct=18ae Jul 19 23:28:15 media kernel: [260150.582440] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jul 19 23:28:15 media kernel: [260150.582442] usb 6-1: Product: Usb Sata Bridge Jul 19 23:28:15 media kernel: [260150.582444] usb 6-1: Manufacturer: SYMWAVE Jul 19 23:28:15 media kernel: [260150.582446] usb 6-1: SerialNumber: 39584B304C4E3441 Jul 19 23:28:15 media kernel: [260150.870412] scsi11 : usb-storage 6-1:1.0 Jul 19 23:28:16 media kernel: [260151.882087] scsi 11:0:0:0: Direct-Access SYMWAVE ST33000651AS CC44 PQ: 0 ANSI: 4 Jul 19 23:28:16 media kernel: [260151.882242] scsi 11:0:0:1: Direct-Access SYMWAVE ST32000641AS CC12 PQ: 0 ANSI: 4 Jul 19 23:28:16 media kernel: [260151.882677] sd 11:0:0:0: Attached scsi generic sg2 type 0 Jul 19 23:28:16 media kernel: [260151.882774] sd 11:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). Jul 19 23:28:16 media kernel: [260151.882857] sd 11:0:0:1: Attached scsi generic sg3 type 0 Jul 19 23:28:16 media kernel: [260151.882893] sd 11:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) Jul 19 23:28:16 media kernel: [260151.883085] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.883582] sd 11:0:0:0: [sdb] Write Protect is off Jul 19 23:28:16 media kernel: [260151.883961] sd 11:0:0:1: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) Jul 19 23:28:16 media kernel: [260151.884145] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.884570] sd 11:0:0:1: [sdc] Write Protect is off Jul 19 23:28:16 media kernel: [260151.884855] sd 11:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). Jul 19 23:28:16 media kernel: [260151.885286] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.885807] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.909595] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.910159] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.910163] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.910167] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.910169] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.910172] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.910182] quiet_error: 2 callbacks suppressed Jul 19 23:28:16 media kernel: [260151.910570] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.911153] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.911156] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.911159] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.911161] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.911164] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.911385] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.911902] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.911905] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.911908] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.911910] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.911913] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.912128] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.912650] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.912653] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.912656] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.912657] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.912660] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.912876] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.913439] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.913442] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.913445] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.913446] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.913449] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.945227] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.945863] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.945866] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.945870] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.945871] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.945875] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 (...) and so on for like 10 seconds until it gives up (...) 3. Question So, my question would be: what is causing this? Am I missing something, should I configure things differently, is this a known limitation? Searching online for more information did not yield any useful results... Thank you in advance for any help!

  Read the article

• Moving data files failing

  - by Miles Hayler

  Trying to migrate data from C: to D: via the SBS console is failing. The wizard starts running but drops out in the first few seconds. I'll post the full logs, but the important lines appear to be as follows: An exception of type 'Type: System.IO.FileNotFoundException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred. Message: The system cannot find the file specified. (Exception from HRESULT: 0x80070002) Stack: at TaskScheduler.TaskSchedulerClass.GetFolder(String Path) at Microsoft.WindowsServerSolutions.Common.WindowsTaskScheduler..ctor(String taskPath, String taskName) BaseException: Microsoft.WindowsServerSolutions.Storage.Common.StorageException: GetServerBackupTaskStatus: fail to find the task --- ErrorCode:0 I've been googling for days with no luck. I have found that mscorlib is a component of .net, and I've discovered multiple instances of the file in %windir%, %windir%\winsxs, %windir%\Microsoft.net Anyone come across and fixed this one before? --------------------------------------------------------- [1516] 110315.190856.1105: Storage: Initializing...C:\Program Files\Windows Small Business Server\Bin\MoveData.exe [1516] 110315.190856.2875: Storage: Data Store to be moved: Exchange [1516] 110315.190856.5305: TaskScheduler: Exception System.IO.FileNotFoundException: [1516] 110315.190856.5605: Exception: --------------------------------------- An exception of type 'Type: System.IO.FileNotFoundException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred. Timestamp: 03/15/2011 19:08:56 Message: The system cannot find the file specified. (Exception from HRESULT: 0x80070002) Stack: at TaskScheduler.TaskSchedulerClass.GetFolder(String Path) at Microsoft.WindowsServerSolutions.Common.WindowsTaskScheduler..ctor(String taskPath, String taskName) [1516] 110315.190856.5625: Storage: Exception Microsoft.WindowsServerSolutions.Common.WindowsTaskSchedulerException: [1516] 110315.190856.5635: Exception: --------------------------------------- [b]An exception of type 'Type: Microsoft.WindowsServerSolutions.Common.WindowsTaskSchedulerException, Common, Version=6.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' has occurred.[/b] Timestamp: 03/15/2011 19:08:56 Message: Failed to find the task path Stack: at Microsoft.WindowsServerSolutions.Common.WindowsTaskScheduler..ctor(String taskPath, String taskName) at Microsoft.WindowsServerSolutions.Storage.Common.ServerBackupUtility.GetServerBackupTaskStatus() --------------------------------------- An exception of type 'Type: System.IO.FileNotFoundException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred. Timestamp: 03/15/2011 19:08:56 Message: The system cannot find the file specified. (Exception from HRESULT: 0x80070002) Stack: at TaskScheduler.TaskSchedulerClass.GetFolder(String Path) at Microsoft.WindowsServerSolutions.Common.WindowsTaskScheduler..ctor(String taskPath, String taskName) [1516] 110315.190856.5665: Storage: Error Retrieving Server Backup Task Status: ErrorCode:0 BaseException: Microsoft.WindowsServerSolutions.Storage.Common.StorageException: GetServerBackupTaskStatus: fail to find the task ---> ErrorCode:0 BaseException: Microsoft.WindowsServerSolutions.Common.WindowsTaskSchedulerException: Failed to find the task path ---> System.IO.FileNotFoundException: The system cannot find the file specified. (Exception from HRESULT: 0x80070002) at TaskScheduler.TaskSchedulerClass.GetFolder(String Path) at Microsoft.WindowsServerSolutions.Common.WindowsTaskScheduler..ctor(String taskPath, String taskName) --- End of inner exception stack trace --- at Microsoft.WindowsServerSolutions.Common.WindowsTaskScheduler..ctor(String taskPath, String taskName) at Microsoft.WindowsServerSolutions.Storage.Common.ServerBackupUtility.GetServerBackupTaskStatus() --- End of inner exception stack trace --- at Microsoft.WindowsServerSolutions.Storage.Common.ServerBackupUtility.GetServerBackupTaskStatus() at Microsoft.WindowsServerSolutions.Storage.MoveData.Helper.get_ServerBackupTaskState() [1516] 110315.190857.6216: Storage: Backup Task State: Unknown [1516] 110315.190857.9347: Storage: Launching the Move Data Wizard! [1516] 110315.190857.9397: Wizard: Admin:QueryNextPage(null) = Storage.MoveDataWizard.GettingStartedPage [1516] 110315.190857.9417: Wizard: TOC Storage.MoveDataWizard.GettingStartedPage is on ExpectedPath [1516] 110315.190857.9577: Wizard: Storage.MoveDataWizard.GettingStartedPage entered [1516] 110315.190857.9657: Wizard: Admin:QueryNextPage(Storage.MoveDataWizard.GettingStartedPage) = Storage.MoveDataWizard.DiagnoseDataStorePage [1516] 110315.190857.9657: Wizard: TOC Storage.MoveDataWizard.DiagnoseDataStorePage is on ExpectedPath [1516] 110315.190857.9657: Wizard: Admin:QueryNextPage(Storage.MoveDataWizard.DiagnoseDataStorePage) = Storage.MoveDataWizard.NewDataStoreLocationPage [1516] 110315.190857.9657: Wizard: TOC Storage.MoveDataWizard.NewDataStoreLocationPage is on ExpectedPath [1516] 110315.190857.9657: Wizard: Admin:QueryNextPage(Storage.MoveDataWizard.NewDataStoreLocationPage) = null [1516] 110315.190857.9697: Wizard: ---------------------------------- [1516] 110315.190857.9697: Wizard: The pages visted: [1516] 110315.190857.9697: Wizard: Current Page := [TOC Storage.MoveDataWizard.GettingStartedPage] [1516] 110315.190857.9697: Wizard: [TOC] : TOC Storage.MoveDataWizard.DiagnoseDataStorePage [1516] 110315.190857.9697: Wizard: [TOC] : TOC Storage.MoveDataWizard.NewDataStoreLocationPage [1516] 110315.190857.9697: Wizard: Step 1 of 3 [1516] 110315.190907.0406: Wizard: Admin:QueryNextPage(Storage.MoveDataWizard.GettingStartedPage) = Storage.MoveDataWizard.DiagnoseDataStorePage [1516] 110315.190907.0416: Wizard: Storage.MoveDataWizard.GettingStartedPage exited with the button: Next [1516] 110315.190907.0416: WizardChainEngine Next Clicked: Going to page {0}.: Storage.MoveDataWizard.DiagnoseDataStorePage [1516] 110315.190907.0496: Wizard: Storage.MoveDataWizard.DiagnoseDataStorePage entered [1516] 110315.190907.0606: Wizard: Admin:QueryNextPage(Storage.MoveDataWizard.DiagnoseDataStorePage) = Storage.MoveDataWizard.NewDataStoreLocationPage [1516] 110315.190907.0606: Wizard: Admin:QueryNextPage(Storage.MoveDataWizard.NewDataStoreLocationPage) = null [1516] 110315.190907.0606: Wizard: ---------------------------------- [1516] 110315.190907.0606: Wizard: The pages visted: [1516] 110315.190907.0606: Wizard: [TOC] visited: TOC Storage.MoveDataWizard.GettingStartedPage [1516] 110315.190907.0606: Wizard: Current Page := [TOC Storage.MoveDataWizard.DiagnoseDataStorePage] [1516] 110315.190907.0616: Wizard: [TOC] : TOC Storage.MoveDataWizard.NewDataStoreLocationPage [1516] 110315.190907.0616: Wizard: Step 2 of 3 [19772] 110315.190907.0656: Storage: Starting System Diagnosis [19772] 110315.190907.0656: Storage: Getting Data Store Information [19772] 110315.190907.1086: Storage: Create the list of storage and DB directory path [19772] 110315.190907.1246: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingTasks..ctor [19772] 110315.190907.1546: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingTasks.Initialize [19772] 110315.190907.1596: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.Initialize [19772] 110315.190907.1606: Messaging: Exchange install path: C:\Program Files\Microsoft\Exchange Server\bin [19772] 110315.190908.4157: Messaging: E12 Monad runspace created ID: Microsoft.PowerShell [19772] 110315.190908.4237: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190908.4287: Messaging: Executed management shell command: get-exchangeserver [19772] 110315.190910.2369: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190910.2369: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.Initialize [19772] 110315.190910.5699: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingTasks.GatherAdminInfo [19772] 110315.190910.5699: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190910.5719: Messaging: Executed management shell command: get-user -Identity "dmagroup.local\Administrator" [19772] 110315.190911.0870: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.0880: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.0880: Messaging: Executed management shell command: get-mailbox -Identity "d2ae2bf0-48a7-4ce9-9e72-bb3c765454ac" [19772] 110315.190911.1300: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.1310: Messaging: User Administrator is mail enabled and can use MessagingManagement to send mail. [19772] 110315.190911.1310: Messaging: Email address used for user: [email protected] [19772] 110315.190911.1440: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.1440: Messaging: Executed management shell command: get-group -Identity "Domain Admins" [19772] 110315.190911.1630: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.1640: Messaging: User Administrator is a member of Domain Admins and can use MessagingManagement to manage Exchange. [19772] 110315.190911.1640: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Management.MessagingTasks.GatherAdminInfo [19772] 110315.190911.1640: Messaging: MessagingManagement enabled for Exchange management: True [19772] 110315.190911.1640: Messaging: MessagingManagement enabled for mail submission: True [19772] 110315.190911.1640: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Management.MessagingTasks.Initialize [19772] 110315.190911.1640: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Tasks.TaskMoveExchangeData.CreateDataStoreDriveList [19772] 110315.190911.1670: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.Initialize [19772] 110315.190911.1670: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.1670: Messaging: Executed management shell command: get-storagegroup -Server "SERVER01" [19772] 110315.190911.2990: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.3070: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.Initialize [19772] 110315.190911.3070: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.3070: Messaging: Executed management shell command: get-mailboxdatabase -Server "SERVER01" [19772] 110315.190911.4440: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.4520: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.Initialize [19772] 110315.190911.4520: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.4520: Messaging: Executed management shell command: get-publicfolderdatabase -Server "SERVER01" [19772] 110315.190911.5240: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.5510: Storage: Data Store Drive/s Details:Name=C:\,Size=12675712420 [19772] 110315.190911.5510: Storage: Data Store Size Details: Current Total Size=12675712420 Required Size=12675712420 [19772] 110315.190911.5510: Storage: MoveData Task can move the Data Store=True [19772] 110315.190911.8401: Storage: An error was encountered when performing system diagnosis : ErrorCode:0 BaseException: Microsoft.WindowsServerSolutions.Storage.Common.StorageException: WMI error occurred while accessing drive ---> System.Management.ManagementException: Not found at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode) at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext() at Microsoft.WindowsServerSolutions.Storage.Common.DriveUtil.IsDriveRemovable(String drive) --- End of inner exception stack trace --- at Microsoft.WindowsServerSolutions.Storage.Common.DriveUtil.IsDriveRemovable(String drive) at Microsoft.WindowsServerSolutions.Storage.Common.DataStoreInfo.LoadAvailableDrives() at Microsoft.WindowsServerSolutions.Storage.Common.MoveDataUtil.CanMoveData(DataStoreInfo storeInfo, MoveDataError& error) at Microsoft.WindowsServerSolutions.Storage.MoveData.DiagnoseDataStorePagePresenter.DiagnoseDataStore(Object sender, DoWorkEventArgs args) [1516] 110315.190912.0331: Storage: An error occured during the execution: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> ErrorCode:0 BaseException: Microsoft.WindowsServerSolutions.Storage.Common.StorageException: Diagnosing the Data Store failed (see the inner exception) ---> ErrorCode:0 BaseException: Microsoft.WindowsServerSolutions.Storage.Common.StorageException: WMI error occurred while accessing drive ---> System.Management.ManagementException: Not found at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode) at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext() at Microsoft.WindowsServerSolutions.Storage.Common.DriveUtil.IsDriveRemovable(String drive) --- End of inner exception stack trace --- at Microsoft.WindowsServerSolutions.Storage.Common.DriveUtil.IsDriveRemovable(String drive) at Microsoft.WindowsServerSolutions.Storage.Common.DataStoreInfo.LoadAvailableDrives() at Microsoft.WindowsServerSolutions.Storage.Common.MoveDataUtil.CanMoveData(DataStoreInfo storeInfo, MoveDataError& error) at Microsoft.WindowsServerSolutions.Storage.MoveData.DiagnoseDataStorePagePresenter.DiagnoseDataStore(Object sender, DoWorkEventArgs args) at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument) --- End of inner exception stack trace --- at Microsoft.WindowsServerSolutions.Storage.MoveData.DiagnoseDataStorePagePresenter.backgroundWorker_RunWorkerCompleted(Object sender, RunWorkerCompletedEventArgs e) --- End of inner exception stack trace --- at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Delegate.DynamicInvokeImpl(Object[] args) at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme) at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme) at System.Windows.Forms.Control.InvokeMarshaledCallbacks() at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg) at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData) at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context) at Microsoft.WindowsServerSolutions.Common.Wizards.Framework.WizardFrameView.Create() at Microsoft.WindowsServerSolutions.Common.Wizards.Framework.WizardChainEngine.Launch() at Microsoft.WindowsServerSolutions.Storage.MoveData.MainClass.LaunchMoveDataWizard() at Microsoft.WindowsServerSolutions.Storage.MoveData.MainClass.Main(String[] args)

  Read the article

• Tomcat 7 taking ages to start up after upgrade

  - by Lawrence

  I recently updated my server installation from Tomcat 6 to Tomcat 7, in order to take advantage of better connection pooling. My project uses Hibernate, for object persistance, a Mysql 5.5.20 database, and memcached for caching. When I was using Tomcat 6, Tomcat would start in about 8 seconds. After moving to Tomcat 7, it now takes between 75 - 80 seconds to start (this is on a Macbook pro 15", core i7 2Ghz, 8Gb of RAM). The only thing that has really changed between during the move from Tomcat 6 to 7 has been my context.xml file, which controls the connection pooling information: <Context antiJARLocking="true" reloadable="true" path=""> <Resource name="jdbc/test-db" auth="Container" type="javax.sql.DataSource" factory="org.apache.tomcat.jdbc.pool.DataSourceFactory" testOnBorrow="true" testOnReturn="false" testWhileIdle="true" validationQuery="SELECT 1" validationQueryTimeout="20000" validationInterval="30000" timeBetweenEvictionRunsMillis="60000" logValidationErrors="true" autoReconnect="true" username="webuser" password="xxxxxxx" driverClassName="com.mysql.jdbc.Driver" url="jdbc:mysql://databasename.us-east-1.rds.amazonaws.com:3306/test-db" maxActive="15" minIdle="2" maxIdle="10" maxWait="10000" maxAge="7200000"/> </Context> Now, as you can see, the database is running on Amazon RDS (where our live servers are), and thus is about 200ms round trip time away from my machine. I have already checked that I have security permissions to that database from my machine, (and anyway, it connects after 75 secs, so it cant be that). My initial thought was that Tomcat 7 and hibernate are doing something weird (like pre-instantiating a bunch of connections or something), and the latency to the database is amplifying the effects. While trying to diagnose the problem, I used jstack to get a stack trace of the Tomcat 7 server while its doing its startup thing. Here is the stack trace... Full thread dump Java HotSpot(TM) 64-Bit Server VM (20.12-b01-434 mixed mode): "Attach Listener" daemon prio=9 tid=7fa4c0038800 nid=0x10c39a000 waiting on condition [00000000] java.lang.Thread.State: RUNNABLE "Abandoned connection cleanup thread" daemon prio=5 tid=7fa4bb810000 nid=0x10f3ba000 in Object.wait() [10f3b9000] java.lang.Thread.State: WAITING (on object monitor) at java.lang.Object.wait(Native Method) - waiting on <7f40a0070> (a java.lang.ref.ReferenceQueue$Lock) at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118) - locked <7f40a0070> (a java.lang.ref.ReferenceQueue$Lock) at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134) at com.mysql.jdbc.NonRegisteringDriver$1.run(NonRegisteringDriver.java:93) "PoolCleaner[545768040:1352724902327]" daemon prio=5 tid=7fa4be852800 nid=0x10e772000 in Object.wait() [10e771000] java.lang.Thread.State: TIMED_WAITING (on object monitor) at java.lang.Object.wait(Native Method) - waiting on <7f40c7c90> (a java.util.TaskQueue) at java.util.TimerThread.mainLoop(Timer.java:509) - locked <7f40c7c90> (a java.util.TaskQueue) at java.util.TimerThread.run(Timer.java:462) "localhost-startStop-1" daemon prio=5 tid=7fa4bd034800 nid=0x10d66b000 runnable [10d668000] java.lang.Thread.State: RUNNABLE at java.net.SocketInputStream.socketRead0(Native Method) at java.net.SocketInputStream.read(SocketInputStream.java:129) at com.mysql.jdbc.util.ReadAheadInputStream.fill(ReadAheadInputStream.java:114) at com.mysql.jdbc.util.ReadAheadInputStream.readFromUnderlyingStreamIfNecessary(ReadAheadInputStream.java:161) at com.mysql.jdbc.util.ReadAheadInputStream.read(ReadAheadInputStream.java:189) - locked <7f3673be0> (a com.mysql.jdbc.util.ReadAheadInputStream) at com.mysql.jdbc.MysqlIO.readFully(MysqlIO.java:3014) at com.mysql.jdbc.MysqlIO.reuseAndReadPacket(MysqlIO.java:3467) at com.mysql.jdbc.MysqlIO.reuseAndReadPacket(MysqlIO.java:3456) at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3997) at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:2468) at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:2629) at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2713) - locked <7f366a1c0> (a com.mysql.jdbc.JDBC4Connection) at com.mysql.jdbc.ConnectionImpl.configureClientCharacterSet(ConnectionImpl.java:1930) at com.mysql.jdbc.ConnectionImpl.initializePropsFromServer(ConnectionImpl.java:3571) at com.mysql.jdbc.ConnectionImpl.connectOneTryOnly(ConnectionImpl.java:2445) at com.mysql.jdbc.ConnectionImpl.createNewIO(ConnectionImpl.java:2215) - locked <7f366a1c0> (a com.mysql.jdbc.JDBC4Connection) at com.mysql.jdbc.ConnectionImpl.<init>(ConnectionImpl.java:813) at com.mysql.jdbc.JDBC4Connection.<init>(JDBC4Connection.java:47) at sun.reflect.GeneratedConstructorAccessor10.newInstance(Unknown Source) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at com.mysql.jdbc.Util.handleNewInstance(Util.java:411) at com.mysql.jdbc.ConnectionImpl.getInstance(ConnectionImpl.java:399) at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:334) at org.apache.tomcat.jdbc.pool.PooledConnection.connectUsingDriver(PooledConnection.java:278) at org.apache.tomcat.jdbc.pool.PooledConnection.connect(PooledConnection.java:182) at org.apache.tomcat.jdbc.pool.ConnectionPool.createConnection(ConnectionPool.java:699) at org.apache.tomcat.jdbc.pool.ConnectionPool.borrowConnection(ConnectionPool.java:631) at org.apache.tomcat.jdbc.pool.ConnectionPool.init(ConnectionPool.java:485) at org.apache.tomcat.jdbc.pool.ConnectionPool.<init>(ConnectionPool.java:143) at org.apache.tomcat.jdbc.pool.DataSourceProxy.pCreatePool(DataSourceProxy.java:116) - locked <7f34f0dc8> (a org.apache.tomcat.jdbc.pool.DataSource) at org.apache.tomcat.jdbc.pool.DataSourceProxy.createPool(DataSourceProxy.java:103) at org.apache.tomcat.jdbc.pool.DataSourceFactory.createDataSource(DataSourceFactory.java:539) at org.apache.tomcat.jdbc.pool.DataSourceFactory.getObjectInstance(DataSourceFactory.java:237) at org.apache.naming.factory.ResourceFactory.getObjectInstance(ResourceFactory.java:143) at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304) at org.apache.naming.NamingContext.lookup(NamingContext.java:843) at org.apache.naming.NamingContext.lookup(NamingContext.java:154) at org.apache.naming.NamingContext.lookup(NamingContext.java:831) at org.apache.naming.NamingContext.lookup(NamingContext.java:168) at org.apache.catalina.core.NamingContextListener.addResource(NamingContextListener.java:1061) at org.apache.catalina.core.NamingContextListener.createNamingContext(NamingContextListener.java:671) at org.apache.catalina.core.NamingContextListener.lifecycleEvent(NamingContextListener.java:270) at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119) at org.apache.catalina.util.LifecycleBase.fireLifecycleEvent(LifecycleBase.java:90) at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5173) - locked <7f46b07f0> (a org.apache.catalina.core.StandardContext) at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150) - locked <7f46b07f0> (a org.apache.catalina.core.StandardContext) at org.apache.catalina.core.ContainerBase$StartChild.call(ContainerBase.java:1559) at org.apache.catalina.core.ContainerBase$StartChild.call(ContainerBase.java:1549) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) at java.util.concurrent.FutureTask.run(FutureTask.java:138) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:680) "Catalina-startStop-1" daemon prio=5 tid=7fa4b7a5e800 nid=0x10d568000 waiting on condition [10d567000] java.lang.Thread.State: WAITING (parking) at sun.misc.Unsafe.park(Native Method) - parking to wait for <7f480e970> (a java.util.concurrent.FutureTask$Sync) at java.util.concurrent.locks.LockSupport.park(LockSupport.java:156) at java.util.concurrent.locks.AbstractQueuedSynchronizer.parkAndCheckInterrupt(AbstractQueuedSynchronizer.java:811) at java.util.concurrent.locks.AbstractQueuedSynchronizer.doAcquireSharedInterruptibly(AbstractQueuedSynchronizer.java:969) at java.util.concurrent.locks.AbstractQueuedSynchronizer.acquireSharedInterruptibly(AbstractQueuedSynchronizer.java:1281) at java.util.concurrent.FutureTask$Sync.innerGet(FutureTask.java:218) at java.util.concurrent.FutureTask.get(FutureTask.java:83) at org.apache.catalina.core.ContainerBase.startInternal(ContainerBase.java:1123) - locked <7f453c630> (a org.apache.catalina.core.StandardHost) at org.apache.catalina.core.StandardHost.startInternal(StandardHost.java:800) - locked <7f453c630> (a org.apache.catalina.core.StandardHost) at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150) - locked <7f453c630> (a org.apache.catalina.core.StandardHost) at org.apache.catalina.core.ContainerBase$StartChild.call(ContainerBase.java:1559) at org.apache.catalina.core.ContainerBase$StartChild.call(ContainerBase.java:1549) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) at java.util.concurrent.FutureTask.run(FutureTask.java:138) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:680) "GC Daemon" daemon prio=2 tid=7fa4b9912800 nid=0x10d465000 in Object.wait() [10d464000] java.lang.Thread.State: TIMED_WAITING (on object monitor) at java.lang.Object.wait(Native Method) - waiting on <7f4506d28> (a sun.misc.GC$LatencyLock) at sun.misc.GC$Daemon.run(GC.java:100) - locked <7f4506d28> (a sun.misc.GC$LatencyLock) "Low Memory Detector" daemon prio=5 tid=7fa4b480b800 nid=0x10c8ae000 runnable [00000000] java.lang.Thread.State: RUNNABLE "C2 CompilerThread1" daemon prio=9 tid=7fa4b480b000 nid=0x10c7ab000 waiting on condition [00000000] java.lang.Thread.State: RUNNABLE "C2 CompilerThread0" daemon prio=9 tid=7fa4b480a000 nid=0x10c6a8000 waiting on condition [00000000] java.lang.Thread.State: RUNNABLE "Signal Dispatcher" daemon prio=9 tid=7fa4b4809800 nid=0x10c5a5000 runnable [00000000] java.lang.Thread.State: RUNNABLE "Surrogate Locker Thread (Concurrent GC)" daemon prio=5 tid=7fa4b4808800 nid=0x10c4a2000 waiting on condition [00000000] java.lang.Thread.State: RUNNABLE "Finalizer" daemon prio=8 tid=7fa4b793f000 nid=0x10c297000 in Object.wait() [10c296000] java.lang.Thread.State: WAITING (on object monitor) at java.lang.Object.wait(Native Method) - waiting on <7f451c8f0> (a java.lang.ref.ReferenceQueue$Lock) at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118) - locked <7f451c8f0> (a java.lang.ref.ReferenceQueue$Lock) at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134) at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159) "Reference Handler" daemon prio=10 tid=7fa4b793e000 nid=0x10c194000 in Object.wait() [10c193000] java.lang.Thread.State: WAITING (on object monitor) at java.lang.Object.wait(Native Method) - waiting on <7f452e168> (a java.lang.ref.Reference$Lock) at java.lang.Object.wait(Object.java:485) at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116) - locked <7f452e168> (a java.lang.ref.Reference$Lock) "main" prio=5 tid=7fa4b7800800 nid=0x104329000 waiting on condition [104327000] java.lang.Thread.State: WAITING (parking) at sun.misc.Unsafe.park(Native Method) - parking to wait for <7f480e9a0> (a java.util.concurrent.FutureTask$Sync) at java.util.concurrent.locks.LockSupport.park(LockSupport.java:156) at java.util.concurrent.locks.AbstractQueuedSynchronizer.parkAndCheckInterrupt(AbstractQueuedSynchronizer.java:811) at java.util.concurrent.locks.AbstractQueuedSynchronizer.doAcquireSharedInterruptibly(AbstractQueuedSynchronizer.java:969) at java.util.concurrent.locks.AbstractQueuedSynchronizer.acquireSharedInterruptibly(AbstractQueuedSynchronizer.java:1281) at java.util.concurrent.FutureTask$Sync.innerGet(FutureTask.java:218) at java.util.concurrent.FutureTask.get(FutureTask.java:83) at org.apache.catalina.core.ContainerBase.startInternal(ContainerBase.java:1123) - locked <7f451fd90> (a org.apache.catalina.core.StandardEngine) at org.apache.catalina.core.StandardEngine.startInternal(StandardEngine.java:302) - locked <7f451fd90> (a org.apache.catalina.core.StandardEngine) at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150) - locked <7f451fd90> (a org.apache.catalina.core.StandardEngine) at org.apache.catalina.core.StandardService.startInternal(StandardService.java:443) - locked <7f451fd90> (a org.apache.catalina.core.StandardEngine) at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150) - locked <7f453e810> (a org.apache.catalina.core.StandardService) at org.apache.catalina.core.StandardServer.startInternal(StandardServer.java:732) - locked <7f4506d58> (a [Lorg.apache.catalina.Service;) at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150) - locked <7f44f7ba0> (a org.apache.catalina.core.StandardServer) at org.apache.catalina.startup.Catalina.start(Catalina.java:684) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:322) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:451) "VM Thread" prio=9 tid=7fa4b7939800 nid=0x10c091000 runnable "Gang worker#0 (Parallel GC Threads)" prio=9 tid=7fa4b7802000 nid=0x10772b000 runnable "Gang worker#1 (Parallel GC Threads)" prio=9 tid=7fa4b7802800 nid=0x10782e000 runnable "Gang worker#2 (Parallel GC Threads)" prio=9 tid=7fa4b7803000 nid=0x107931000 runnable "Gang worker#3 (Parallel GC Threads)" prio=9 tid=7fa4b7804000 nid=0x107a34000 runnable "Gang worker#4 (Parallel GC Threads)" prio=9 tid=7fa4b7804800 nid=0x107b37000 runnable "Gang worker#5 (Parallel GC Threads)" prio=9 tid=7fa4b7805000 nid=0x107c3a000 runnable "Gang worker#6 (Parallel GC Threads)" prio=9 tid=7fa4b7805800 nid=0x107d3d000 runnable "Gang worker#7 (Parallel GC Threads)" prio=9 tid=7fa4b7806800 nid=0x107e40000 runnable "Concurrent Mark-Sweep GC Thread" prio=9 tid=7fa4b78e3800 nid=0x10bd0b000 runnable "Gang worker#0 (Parallel CMS Threads)" prio=9 tid=7fa4b78e2800 nid=0x10b305000 runnable "Gang worker#1 (Parallel CMS Threads)" prio=9 tid=7fa4b78e3000 nid=0x10b408000 runnable "VM Periodic Task Thread" prio=10 tid=7fa4b4815800 nid=0x10c9b1000 waiting on condition "Exception Catcher Thread" prio=10 tid=7fa4b7801800 nid=0x104554000 runnable JNI global references: 919 The only thing I can figure out from this is that it looks like the mysql jdbc drivers might have something to do with the long start up (the various stack traces I took during the start up process all pretty much look the same as this). Could anyone shed some light on what might be causing this? Have I done something dense in my context.xml? Is hibernate perhaps to blame?

  Read the article

• GRUB doesn't recognize partitions on one harddisk

  - by knizz

  I have a dualboot computer with Windows Vista (on hd0) and Ubuntu 9.10. The bootloader is GRUB and the windows bootloader lets me decide between Vista and Ubuntu-Installation (broken WuBi). But now (i don't know why that changed) I can't use start the windows-bootloader anymore. I tried "ls" on the grub-prompt and it gave me a list like: (hd0) (hd1) (hd1,0) (hd1,1) (hd1,2) ... (fd0) It recognizes all partitions of hd1 (the ubuntu-harddisk) but not of hd0(the win-disk). .. WHY? Here is the result of the "boot info script" for the technical details: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks for (UUID=a7c510e3-2399-437b-ab92-fa609e48d63f)/boot/grub. => No boot loader is installed in the MBR of /dev/sdb sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows Vista Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe /wubildr.mbr /wubildr sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb1: _________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unbekannter Dateisystemtyp „“ sdb2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb3: _________________________________________________________________________ File system: Bios Boot Partition Boot sector type: - Boot sector info: sdb4: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 9.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb5: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Platte /dev/sda: 640.1 GByte, 640135028736 Byte 255 Köpfe, 63 Sektoren/Spuren, 77825 Zylinder, zusammen 1250263728 Sektoren Einheiten = Sektoren von 1 × 512 = 512 Bytes Disk identifier: 0x52554d66 Partition Boot Start End Size Id System /dev/sda1 * 2,048 307,202,047 307,200,000 7 HPFS/NTFS /dev/sda2 307,202,048 1,250,258,943 943,056,896 7 HPFS/NTFS Drive: sdb ___________________ _____________________________________________________ Platte /dev/sdb: 640.1 GByte, 640135028736 Byte 255 Köpfe, 63 Sektoren/Spuren, 77825 Zylinder, zusammen 1250263728 Sektoren Einheiten = Sektoren von 1 × 512 = 512 Bytes Disk identifier: 0x00000000 Partition Boot Start End Size Id System /dev/sdb1 1 1,250,263,727 1,250,263,727 ee GPT GUID Partition Table detected. Partition Start End Size System /dev/sdb1 34 262,177 262,144 Microsoft Windows /dev/sdb2 262,178 1,131,253,933 1,130,991,756 Linux or Data /dev/sdb3 1,131,253,934 1,131,255,887 1,954 Bios Boot Partition /dev/sdb4 1,131,255,888 1,245,312,528 114,056,641 Linux or Data /dev/sdb5 1,245,312,529 1,250,263,694 4,951,166 Linux Swap blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 AE1440441440122F ntfs /dev/sda2 3AE66E4DE66E0A09 ntfs data /dev/sdb2 5419D16119DAA4DE ntfs LaufwerkD /dev/sdb4 a7c510e3-2399-437b-ab92-fa609e48d63f ext4 /dev/sdb5 60a0143a-e01b-450a-bbd1-f22059e47b65 swap ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sdb4 / ext4 (rw,errors=remount-ro) =========================== sdb4/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s /boot/grub/grubenv ]; then have_grubenv=true load_env fi set default="0" if [ ${prev_saved_entry} ]; then saved_entry=${prev_saved_entry} save_env saved_entry prev_saved_entry= save_env prev_saved_entry fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi if [ ${recordfail} = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/white ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry "Ubuntu, Linux 2.6.31-20-generic" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi set quiet=1 insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-20-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro quiet splash initrd /boot/initrd.img-2.6.31-20-generic } menuentry "Ubuntu, Linux 2.6.31-20-generic (recovery mode)" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-20-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro single initrd /boot/initrd.img-2.6.31-20-generic } menuentry "Ubuntu, Linux 2.6.31-14-generic" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi set quiet=1 insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-14-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro quiet splash initrd /boot/initrd.img-2.6.31-14-generic } menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-14-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro single initrd /boot/initrd.img-2.6.31-14-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows Vista (loader) (on /dev/sda1)" { insmod ntfs set root=(hd0,1) search --no-floppy --fs-uuid --set ae1440441440122f chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### =============================== sdb4/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 # / was on /dev/sdb4 during installation UUID=a7c510e3-2399-437b-ab92-fa609e48d63f / ext4 errors=remount-ro 0 1 # swap was on /dev/sdb5 during installation UUID=60a0143a-e01b-450a-bbd1-f22059e47b65 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 =================== sdb4: Location of files loaded by Grub: =================== 583.8GB: boot/grub/core.img 583.8GB: boot/grub/grub.cfg 579.7GB: boot/initrd.img-2.6.31-14-generic 580.0GB: boot/initrd.img-2.6.31-20-generic 579.7GB: boot/vmlinuz-2.6.31-14-generic 579.8GB: boot/vmlinuz-2.6.31-20-generic 580.0GB: initrd.img 579.7GB: initrd.img.old 579.8GB: vmlinuz 579.7GB: vmlinuz.old =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on sdb1 00000000 54 34 dc 3b 8b ff 6c fa 3e 59 3d 24 25 af 5f 9b |T4.;..l.>Y=$%._.| 00000010 72 f8 36 3d 56 30 22 fd c6 08 5e 39 7f dc 29 48 |r.6=V0"...^9..)H| 00000020 48 e5 24 52 77 b0 fc 64 b6 ce 48 c3 07 ce b5 81 |H.$Rw..d..H.....| 00000030 06 68 60 4f 6e fb 83 92 df 3a 54 b9 df 21 2a cd |.h`On....:T..!*.| 00000040 1e 2f e2 49 fe cf 81 2d 52 17 1a 4e 66 b4 f3 f0 |./.I...-R..Nf...| 00000050 41 25 e3 96 26 28 fe 19 61 72 75 f8 40 a3 b7 ef |A%..&(..aru.@...| 00000060 5f 79 dc cb 28 44 44 7c 9b 9a 7b 6c 4b 4b 60 0f |_y..(DD|..{lKK`.| 00000070 a9 97 87 bc 85 9f db bb d2 1a 88 9f aa 49 18 d5 |.............I..| 00000080 92 2d db 7e fe f7 8d 7a 18 c0 33 c5 bd 7a 46 07 |.-.~...z..3..zF.| 00000090 c8 27 13 66 94 49 62 9f bc 99 56 55 25 fb 94 a9 |.'.f.Ib...VU%...| 000000a0 3f b2 a7 0a 87 d0 a4 4e 51 f1 09 02 c4 29 eb ff |?......NQ....)..| 000000b0 26 3b 51 3e 5a 0c db ee a6 57 a7 c3 ba a1 74 90 |&;Q>Z....W....t.| 000000c0 ee 70 08 18 cc b8 d0 22 ce 96 c7 cb 68 40 98 20 |.p....."....h@. | 000000d0 49 3d 07 ec df d1 8d cf 19 bc 42 90 70 24 01 b4 |I=........B.p$..| 000000e0 28 cf c6 50 d3 95 5a 1b 18 15 33 c7 b2 a8 95 92 |(..P..Z...3.....| 000000f0 bb 93 fe 18 2b 81 c1 6b 9c 30 f1 65 50 6a 80 3d |....+..k.0.ePj.=| 00000100 74 37 a8 59 a6 51 8a 63 b6 d8 16 9f a9 47 2a 7c |t7.Y.Q.c.....G*|| 00000110 04 a7 fe 69 47 02 bf e9 b7 1b 7a ea 60 5c 3c 53 |...iG.....z.`\<S| 00000120 5b 10 78 dc 4d d2 a8 22 30 45 37 fb 56 06 9f 06 |[.x.M.."0E7.V...| 00000130 aa df cf 87 3a 3e cf 72 f2 e5 a6 c6 aa e2 7c 1c |....:>.r......|.| 00000140 64 c2 fc 80 ce 02 fc 7f 0f c6 60 81 bf cd 3b 5a |d.........`...;Z| 00000150 37 a5 38 1b 0c 1b 39 2e d6 f6 3d a2 36 e5 87 c3 |7.8...9...=.6...| 00000160 17 b5 fd ee 33 c7 ce a3 d9 c2 57 dc ee 85 48 9d |....3.....W...H.| 00000170 33 60 02 cd c5 83 44 44 ea b6 07 25 0a 4b a6 6e |3`....DD...%.K.n| 00000180 fc 51 42 cd 84 0b 65 b6 19 a1 e5 b2 eb 14 0c fa |.QB...e.........| 00000190 24 77 f5 44 6e 5d 39 dd b6 8e cc f8 30 fe 21 46 |$w.Dn]9.....0.!F| 000001a0 9c ff 95 c6 c7 b5 0a df 54 ca d2 ac bc 64 d0 97 |........T....d..| 000001b0 94 54 d9 29 0f 91 60 20 c3 e4 53 c2 b0 e4 40 72 |.T.)..` ..S...@r| 000001c0 7e 25 bc 81 06 ad 05 46 14 a7 e6 71 6b 5c db 9c |~%.....F...qk\..| 000001d0 0a 5e 76 23 ae 06 01 36 98 21 65 2c 90 e7 4b 1a |.^v#...6.!e,..K.| 000001e0 2a 2d 80 a5 48 db 9e 14 e0 9f e9 aa 00 e3 77 32 |*-..H.........w2| 000001f0 0f fd 94 db 55 a6 64 46 be ae ca de da ee 89 68 |....U.dF.......h| 00000200 =======Devices which don't seem to have a corresponding hard drive============== sdc sdd sde

  Read the article

• Root certificate authority works windows/linux but not mac osx - (malformed)

  - by AKwhat

  I have created a self-signed root certificate authority which if I install onto windows, linux, or even using the certificate store in firefox (windows/linux/macosx) will work perfectly with my terminating proxy. I have installed it into the system keychain and I have set the certificate to always trust. Within the chrome browser details it says "The certificate that Chrome received during this connection attempt is not formatted correctly, so Chrome cannot use it to protect your information. Error type: Malformed certificate" I used this code to create the certificate: openssl genrsa -des3 -passout pass:***** -out private/server.key 4096 openssl req -batch -passin pass:***** -new -x509 -nodes -sha1 -days 3600 -key private/server.key -out server.crt -config ../openssl.cnf If the issue is NOT that it is malformed (because it works everywhere else) then what else could it be? Am I installing it incorrectly? To be clear: Within the windows/linux OS, all browsers work perfectly. Within mac only firefox works if it uses its internal certificate store and not the keychain. It's the keychain method of importing a certificate that causes the issue. Thus, all browsers using the keychain will not work. Root CA Cert: -----BEGIN CERTIFICATE----- **some base64 stuff** -----END CERTIFICATE----- Intermediate CA Cert: Certificate: Data: Version: 3 (0x2) Serial Number: 1 (0x1) Signature Algorithm: sha1WithRSAEncryption Issuer: C=*****, ST=*******, L=******, O=*******, CN=******/emailAddress=****** Validity Not Before: May 21 13:57:32 2014 GMT Not After : Jun 20 13:57:32 2014 GMT Subject: C=*****, ST=********, O=*******, CN=*******/emailAddress=******* Subject Public Key Info: Public Key Algorithm: rsaEncryption RSA Public Key: (4096 bit) Modulus (4096 bit): 00:e7:2d:75:38:23:02:8e:b9:8d:2f:33:4c:2a:11: 6d:d4:f8:29:ab:f3:fc:12:00:0f:bb:34:ec:35:ed: a5:38:10:1e:f3:54:c2:69:ae:3b:22:c0:0d:00:97: 08:da:b9:c9:32:c0:c6:b1:8b:22:7e:53:ea:69:e2: 6d:0f:bd:f5:96:b2:d0:0d:b2:db:07:ba:f1:ce:53: 8a:5e:e0:22:ce:3e:36:ed:51:63:21:e7:45:ad:f9: 4d:9b:8f:7f:33:4c:ed:fc:a6:ac:16:70:f5:96:36: 37:c8:65:47:d1:d3:12:70:3e:8d:2f:fb:9f:94:e0: c9:5f:d0:8c:30:e0:04:23:38:22:e5:d9:84:15:b8: 31:e7:a7:28:51:b8:7f:01:49:fb:88:e9:6c:93:0e: 63:eb:66:2b:b4:a0:f0:31:33:8b:b4:04:84:1f:9e: d5:ed:23:cc:bf:9b:8e:be:9a:5c:03:d6:4f:1a:6f: 2d:8f:47:60:6c:89:c5:f0:06:df:ac:cb:26:f8:1a: 48:52:5e:51:a0:47:6a:30:e8:bc:88:8b:fd:bb:6b: c9:03:db:c2:46:86:c0:c5:a5:45:5b:a9:a3:61:35: 37:e9:fc:a1:7b:ae:71:3a:5c:9c:52:84:dd:b2:86: b3:2e:2e:7a:5b:e1:40:34:4a:46:f0:f8:43:26:58: 30:87:f9:c6:c9:bc:b4:73:8b:fc:08:13:33:cc:d0: b7:8a:31:e9:38:a3:a9:cc:01:e2:d4:c2:a5:c1:55: 52:72:52:2b:06:a3:36:30:0c:5c:29:1a:dd:14:93: 2b:9d:bf:ac:c1:2d:cd:3f:89:1f:bc:ad:a4:f2:bd: 81:77:a9:f4:f0:b9:50:9e:fb:f5:da:ee:4e:b7:66: e5:ab:d1:00:74:29:6f:01:28:32:ea:7d:3f:b3:d7: 97:f2:60:63:41:0f:30:6a:aa:74:f4:63:4f:26:7b: 71:ed:57:f1:d4:99:72:61:f4:69:ad:31:82:76:67: 21:e1:32:2f:e8:46:d3:28:61:b1:10:df:4c:02:e5: d3:cc:22:30:a4:bb:81:10:dc:7d:49:94:b2:02:2d: 96:7f:e5:61:fa:6b:bd:22:21:55:97:82:18:4e:b5: a0:67:2b:57:93:1c:ef:e5:d2:fb:52:79:95:13:11: 20:06:8c:fb:e7:0b:fd:96:08:eb:17:e6:5b:b5:a0: 8d:dd:22:63:99:af:ad:ce:8c:76:14:9a:31:55:d7: 95:ea:ff:10:6f:7c:9c:21:00:5e:be:df:b0:87:75: 5d:a6:87:ca:18:94:e7:6a:15:fe:27:dd:28:5e:c0: ad:d2:91:d3:2d:8e:c3:c0:9f:fb:ff:c0:36:7e:e2: d7:bc:41 Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Subject Alternative Name: DNS:localhost, DNS:dropbox.com, DNS:*.dropbox.com, DNS:filedropper.com, DNS:*.filedropper.com X509v3 Subject Key Identifier: F3:E5:38:5B:3C:AF:1C:73:C1:4C:7D:8B:C8:A1:03:82:65:0D:FF:45 X509v3 Authority Key Identifier: keyid:2B:37:39:7B:9F:45:14:FE:F8:BC:CA:E0:6E:B4:5F:D6:1A:2B:D7:B0 DirName:/C=****/ST=******/L=*******/O=*******/CN=******/emailAddress=******* serial:EE:8C:A3:B4:40:90:B0:62 X509v3 Basic Constraints: CA:TRUE Signature Algorithm: sha1WithRSAEncryption 46:2a:2c:e0:66:e3:fa:c6:80:b6:81:e7:db:c3:29:ab:e7:1c: f0:d9:a0:b7:a9:57:8c:81:3e:30:8f:7d:ef:f7:ed:3c:5f:1e: a5:f6:ae:09:ab:5e:63:b4:f6:d6:b6:ac:1c:a0:ec:10:19:ce: dd:5a:62:06:b4:88:5a:57:26:81:8e:38:b9:0f:26:cd:d9:36: 83:52:ec:df:f4:63:ce:a1:ba:d4:1c:ec:b6:66:ed:f0:32:0e: 25:87:79:fa:95:ee:0f:a0:c6:2d:8f:e9:fb:11:de:cf:26:fa: 59:fa:bd:0b:74:76:a6:5d:41:0d:cd:35:4e:ca:80:58:2a:a8: 5d:e4:d8:cf:ef:92:8d:52:f9:f2:bf:65:50:da:a8:10:1b:5e: 50:a7:7e:57:7b:94:7f:5c:74:2e:80:ae:1e:24:5f:0b:7b:7e: 19:b6:b5:bd:9d:46:5a:e8:47:43:aa:51:b3:4b:3f:12:df:7f: ef:65:21:85:c2:f6:83:84:d0:8d:8b:d9:6d:a8:f9:11:d4:65: 7d:8f:28:22:3c:34:bb:99:4e:14:89:45:a4:62:ed:52:b1:64: 9a:fd:08:cd:ff:ca:9e:3b:51:81:33:e6:37:aa:cb:76:01:90: d1:39:6f:6a:8b:2d:f5:07:f8:f4:2a:ce:01:37:ba:4b:7f:d4: 62:d7:d6:66:b8:78:ad:0b:23:b6:2e:b0:9a:fc:0f:8c:4c:29: 86:a0:bc:33:71:e5:7f:aa:3e:0e:ca:02:e1:f6:88:f0:ff:a2: 04:5a:f5:d7:fe:7d:49:0a:d2:63:9c:24:ed:02:c7:4d:63:e6: 0c:e1:04:cd:a4:bf:a8:31:d3:10:db:b4:71:48:f7:1a:1b:d9: eb:a7:2e:26:00:38:bd:a8:96:b4:83:09:c9:3d:79:90:e1:61: 2c:fc:a0:2c:6b:7d:46:a8:d7:17:7f:ae:60:79:c1:b6:5c:f9: 3c:84:64:7b:7f:db:e9:f1:55:04:6e:b5:d3:5e:d3:e3:13:29: 3f:0b:03:f2:d7:a8:30:02:e1:12:f4:ae:61:6f:f5:4b:e9:ed: 1d:33:af:cd:9b:43:42:35:1a:d4:f6:b9:fb:bf:c9:8d:6c:30: 25:33:43:49:32:43:a5:a8:d8:82:ef:b0:a6:bd:8b:fb:b6:ed: 72:fd:9a:8f:00:3b:97:a3:35:a4:ad:26:2f:a9:7d:74:08:82: 26:71:40:f9:9b:01:14:2e:82:fb:2f:c0:11:51:00:51:07:f9: e1:f6:1f:13:6e:03:ee:d7:85:c2:64:ce:54:3f:15:d4:d7:92: 5f:87:aa:1e:b4:df:51:77:12:04:d2:a5:59:b3:26:87:79:ce: ee:be:60:4e:87:20:5c:7f -----BEGIN CERTIFICATE----- **some base64 stuff** -----END CERTIFICATE-----

  Read the article

• Hard Disk DRDY error: is it a crash

  - by pranjal

  I am using IBM Thinkpad, 1.7GHz, 512 RAM with Linux Mint 9 installed. I have two partitions in addition to root. One of the partitions became read-only yesterday, after which I rebooted my system. It is extremely slow along with DRDY Error : Is my Hard disk crashed ? Error Log while booting. Differences between boot sector and its backup. failed command : READ DMA BMDMA : stat 0X25 ata 1.00 : status : { DRDY ERR } ata 1.00 : status :{ UNC } Buffer I/O error on logical device, logical block 65467 smartctl output for the partition: mint mint # smartctl -a /dev/sda1 smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: TOSHIBA MK4026GAX RoHS Serial Number: X5LY1623T Firmware Version: PA107E User Capacity: 40,007,761,920 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Feb 17 06:48:25 2011 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 153) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 310 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3968 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 40 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 7257 10 Spin_Retry_Count 0x0033 179 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3484 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 489 193 Load_Cycle_Count 0x0032 064 064 000 Old_age Always - 367150 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Lifetime Min/Max 14/57) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 33 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 82 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 101 222 Loaded_Hours 0x0032 085 085 000 Old_age Always - 6146 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 227 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 2371 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2371 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:10.061 READ DMA f8 00 00 00 00 00 e0 00 00:03:10.061 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:10.053 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:10.053 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:10.053 READ NATIVE MAX ADDRESS Error 2370 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:03.328 READ DMA f8 00 00 00 00 00 e0 00 00:03:03.327 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:03.320 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:03.319 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:03.319 READ NATIVE MAX ADDRESS Error 2369 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:56.582 READ DMA f8 00 00 00 00 00 e0 00 00:02:56.582 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:56.574 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:56.574 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:56.574 READ NATIVE MAX ADDRESS Error 2368 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:49.809 READ DMA f8 00 00 00 00 00 e0 00 00:02:49.809 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:49.801 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:49.801 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:49.801 READ NATIVE MAX ADDRESS Error 2367 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:43.056 READ DMA f8 00 00 00 00 00 e0 00 00:02:43.056 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:43.048 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:43.048 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:43.047 READ NATIVE MAX ADDRESS SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging Do I need to get a new Hard Disk my PC ?

  Read the article

• Redmine install not working and displaying directory contents - Ubuntu 10.04

  - by Casey Flynn

  I've gone through the steps to set up and install the redmine project tracking web app on my VPS with Apache2 but I'm running into a situation where instead of displaying the redmine app, I just see the directory contents: Does anyone know what could be the problem? I'm not sure what other files might be of use to diagnose what's going on. Thanks! # # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.2/ for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log" # with ServerRoot set to "" will be interpreted by the # server as "//var/log/apache2/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation (available # at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/etc/apache2" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # #<IfModule !mpm_winnt.c> #<IfModule !mpm_netware.c> LockFile /var/lock/apache2/accept.lock #</IfModule> #</IfModule> # # PidFile: The file in which the server should record its process # identification number when it starts. # This needs to be set in /etc/apache2/envvars # PidFile ${APACHE_PID_FILE} # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # event MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_event_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog /var/log/apache2/error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # Include module configuration: Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf # Include all the user configurations: Include /etc/apache2/httpd.conf # Include ports listing Include /etc/apache2/ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # # Define an access log for VirtualHosts that don't define their own logfile CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined # Include of directories ignores editors' and dpkg's backup files, # see README.Debian for details. # Include generic snippets of statements Include /etc/apache2/conf.d/ # Include the virtual host configurations: Include /etc/apache2/sites-enabled/ # Enable fastcgi for .fcgi files # (If you're using a distro package for mod_fcgi, something like # this is probably already present) #<IfModule mod_fcgid.c> # AddHandler fastcgi-script .fcgi # FastCgiIpcDir /var/lib/apache2/fastcgi #</IfModule> LoadModule fcgid_module /usr/lib/apache2/modules/mod_fcgid.so LoadModule passenger_module /var/lib/gems/1.8/gems/passenger-3.0.7/ext/apache2/mod_passenger.so PassengerRoot /var/lib/gems/1.8/gems/passenger-3.0.7 PassengerRuby /usr/bin/ruby1.8 ServerName demo and my vhosts file #No DNS server, default ip address v-host #domain: none #public: /home/casey/public_html/app/ <VirtualHost *:80> ServerAdmin webmaster@localhost # ScriptAlias /redmine /home/casey/public_html/app/redmine/dispatch.fcgi DirectoryIndex index.html DocumentRoot /home/casey/public_html/app/public <Directory "/home/casey/trac/htdocs"> Order allow,deny Allow from all </Directory> <Directory /var/www/redmine> RailsBaseURI /redmine PassengerResolveSymlinksInDocumentRoot on </Directory> # <Directory /> # Options FollowSymLinks # AllowOverride None # </Directory> # <Directory /var/www/> # Options Indexes FollowSymLinks MultiViews # AllowOverride None # Order allow,deny # allow from all # </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /home/casey/public_html/app/log/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel debug CustomLog /home/casey/public_html/app/log/access.log combined # Alias /doc/ "/usr/share/doc/" # <Directory "/usr/share/doc/"> # Options Indexes MultiViews FollowSymLinks # AllowOverride None # Order deny,allow # Deny from all # Allow from 127.0.0.0/255.0.0.0 ::1/128 # </Directory> </VirtualHost>

  Read the article

• SElinux process killed while trying to set boolean

  - by Antonio

  I've got a strange problem. I can not allow apache to connect to database at my CentOC 6.4 box: [root@centos6 ~]# setsebool -P httpd_can_network_connect on Killed [root@centos6 ~]# sestatus -b | grep httpd_can_network_connect httpd_can_network_connect off httpd_can_network_connect_cobbler off httpd_can_network_connect_db off I watched log file, but there was no log messages: tail -f /var/log/audit/audit.log UPDATE: There are some information in /var/log/messages: Nov 9 19:07:16 vs302 kernel: setsebool invoked oom-killer: gfp_mask=0x280da, order=0, oom_adj=0, oom_score_adj=0 Nov 9 19:07:16 vs302 kernel: setsebool cpuset=/ mems_allowed=0 Nov 9 19:07:16 vs302 kernel: Pid: 1660, comm: setsebool Not tainted 2.6.32-358.23.2.el6.x86_64 #1 Nov 9 19:07:16 vs302 kernel: Call Trace: Nov 9 19:07:16 vs302 kernel: [<ffffffff810cb641>] ? cpuset_print_task_mems_allowed+0x91/0xb0 Nov 9 19:07:16 vs302 kernel: [<ffffffff8111ce40>] ? dump_header+0x90/0x1b0 Nov 9 19:07:16 vs302 kernel: [<ffffffff8111d2c2>] ? oom_kill_process+0x82/0x2a0 Nov 9 19:07:16 vs302 kernel: [<ffffffff8111d201>] ? select_bad_process+0xe1/0x120 Nov 9 19:07:16 vs302 kernel: [<ffffffff8111d700>] ? out_of_memory+0x220/0x3c0 Nov 9 19:07:16 vs302 kernel: [<ffffffff8112c3dc>] ? __alloc_pages_nodemask+0x8ac/0x8d0 Nov 9 19:07:16 vs302 kernel: [<ffffffff81160d6a>] ? alloc_pages_vma+0x9a/0x150 Nov 9 19:07:16 vs302 kernel: [<ffffffff81143f0b>] ? handle_pte_fault+0x76b/0xb50 Nov 9 19:07:16 vs302 kernel: [<ffffffff81228664>] ? task_has_capability+0xb4/0x110 Nov 9 19:07:16 vs302 kernel: [<ffffffff81004a49>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e Nov 9 19:07:16 vs302 kernel: [<ffffffff8114452a>] ? handle_mm_fault+0x23a/0x310 Nov 9 19:07:16 vs302 kernel: [<ffffffff811485b6>] ? vma_adjust+0x556/0x5e0 Nov 9 19:07:16 vs302 kernel: [<ffffffff810474e9>] ? __do_page_fault+0x139/0x480 Nov 9 19:07:16 vs302 kernel: [<ffffffff81148b8a>] ? vma_merge+0x29a/0x3e0 Nov 9 19:07:16 vs302 kernel: [<ffffffff81149fdc>] ? do_brk+0x26c/0x350 Nov 9 19:07:16 vs302 kernel: [<ffffffff8100ba1d>] ? retint_restore_args+0x5/0x6 Nov 9 19:07:16 vs302 kernel: [<ffffffff81513bfe>] ? do_page_fault+0x3e/0xa0 Nov 9 19:07:16 vs302 kernel: [<ffffffff81510fb5>] ? page_fault+0x25/0x30 Nov 9 19:07:16 vs302 kernel: Mem-Info: Nov 9 19:07:16 vs302 kernel: Node 0 DMA per-cpu: Nov 9 19:07:16 vs302 kernel: CPU 0: hi: 0, btch: 1 usd: 0 Nov 9 19:07:16 vs302 kernel: Node 0 DMA32 per-cpu: Nov 9 19:07:16 vs302 kernel: CPU 0: hi: 186, btch: 31 usd: 30 Nov 9 19:07:16 vs302 kernel: active_anon:132249 inactive_anon:46 isolated_anon:0 Nov 9 19:07:16 vs302 kernel: active_file:56 inactive_file:59 isolated_file:0 Nov 9 19:07:16 vs302 kernel: unevictable:0 dirty:2 writeback:0 unstable:0 Nov 9 19:07:16 vs302 kernel: free:1369 slab_reclaimable:1774 slab_unreclaimable:11588 Nov 9 19:07:16 vs302 kernel: mapped:54 shmem:48 pagetables:1211 bounce:0 Nov 9 19:07:16 vs302 kernel: Node 0 DMA free:2440kB min:72kB low:88kB high:108kB active_anon:12156kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:14648kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:24kB slab_unreclaimable:8kB kernel_stack:0kB pagetables:16kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes Nov 9 19:07:16 vs302 kernel: lowmem_reserve[]: 0 590 590 590 Nov 9 19:07:16 vs302 kernel: Node 0 DMA32 free:3036kB min:3072kB low:3840kB high:4608kB active_anon:516840kB inactive_anon:184kB active_file:224kB inactive_file:236kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:604988kB mlocked:0kB dirty:8kB writeback:0kB mapped:216kB shmem:192kB slab_reclaimable:7072kB slab_unreclaimable:46344kB kernel_stack:880kB pagetables:4828kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:128 all_unreclaimable? no Nov 9 19:07:16 vs302 kernel: lowmem_reserve[]: 0 0 0 0 Nov 9 19:07:16 vs302 kernel: Node 0 DMA: 0*4kB 1*8kB 0*16kB 0*32kB 0*64kB 1*128kB 1*256kB 0*512kB 0*1024kB 1*2048kB 0*4096kB = 2440kB Nov 9 19:07:16 vs302 kernel: Node 0 DMA32: 129*4kB 67*8kB 30*16kB 19*32kB 6*64kB 2*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 3036kB Nov 9 19:07:16 vs302 kernel: 182 total pagecache pages Nov 9 19:07:16 vs302 kernel: 0 pages in swap cache Nov 9 19:07:16 vs302 kernel: Swap cache stats: add 0, delete 0, find 0/0 Nov 9 19:07:16 vs302 kernel: Free swap = 0kB Nov 9 19:07:16 vs302 kernel: Total swap = 0kB Nov 9 19:07:16 vs302 kernel: 157439 pages RAM Nov 9 19:07:16 vs302 kernel: 6271 pages reserved Nov 9 19:07:16 vs302 kernel: 2686 pages shared Nov 9 19:07:16 vs302 kernel: 146395 pages non-shared Nov 9 19:07:16 vs302 kernel: [ pid ] uid tgid total_vm rss cpu oom_adj oom_score_adj name Nov 9 19:07:16 vs302 kernel: [ 271] 0 271 2798 231 0 -17 -1000 udevd Nov 9 19:07:16 vs302 kernel: [ 476] 0 476 2797 230 0 -17 -1000 udevd Nov 9 19:07:16 vs302 kernel: [ 718] 0 718 2279 122 0 0 0 dhclient Nov 9 19:07:16 vs302 kernel: [ 762] 0 762 6909 58 0 -17 -1000 auditd Nov 9 19:07:16 vs302 kernel: [ 787] 0 787 62270 147 0 0 0 rsyslogd Nov 9 19:07:16 vs302 kernel: [ 801] 25 801 40326 2655 0 0 0 named Nov 9 19:07:16 vs302 kernel: [ 850] 0 850 16563 172 0 -17 -1000 sshd Nov 9 19:07:16 vs302 kernel: [ 875] 0 875 23451 240 0 0 0 sshd Nov 9 19:07:16 vs302 kernel: [ 966] 498 966 4780 44 0 0 0 wrapper Nov 9 19:07:16 vs302 kernel: [ 968] 498 968 497404 40812 0 0 0 java Nov 9 19:07:16 vs302 kernel: [ 1057] 0 1057 20216 225 0 0 0 master Nov 9 19:07:16 vs302 kernel: [ 1064] 89 1064 20278 209 0 0 0 qmgr Nov 9 19:07:16 vs302 kernel: [ 1071] 0 1071 27075 121 0 0 0 bash Nov 9 19:07:16 vs302 kernel: [ 1111] 0 1111 24880 350 0 0 0 httpd Nov 9 19:07:16 vs302 kernel: [ 1117] 48 1117 24913 351 0 0 0 httpd Nov 9 19:07:16 vs302 kernel: [ 1118] 48 1118 24880 337 0 0 0 httpd Nov 9 19:07:16 vs302 kernel: [ 1119] 48 1119 24880 337 0 0 0 httpd Nov 9 19:07:16 vs302 kernel: [ 1120] 48 1120 24880 337 0 0 0 httpd Nov 9 19:07:16 vs302 kernel: [ 1121] 48 1121 24880 337 0 0 0 httpd Nov 9 19:07:16 vs302 kernel: [ 1122] 48 1122 24880 337 0 0 0 httpd Nov 9 19:07:16 vs302 kernel: [ 1124] 48 1124 24880 337 0 0 0 httpd Nov 9 19:07:16 vs302 kernel: [ 1125] 48 1125 24880 337 0 0 0 httpd Nov 9 19:07:16 vs302 kernel: [ 1129] 0 1129 29313 151 0 0 0 crond Nov 9 19:07:16 vs302 kernel: [ 1143] 0 1143 1018 22 0 0 0 agetty Nov 9 19:07:16 vs302 kernel: [ 1146] 0 1146 1015 22 0 0 0 mingetty Nov 9 19:07:16 vs302 kernel: [ 1514] 0 1514 23451 237 0 0 0 sshd Nov 9 19:07:16 vs302 kernel: [ 1517] 0 1517 27075 113 0 0 0 bash Nov 9 19:07:16 vs302 kernel: [ 1641] 89 1641 20236 218 0 0 0 pickup Nov 9 19:07:16 vs302 kernel: [ 1659] 0 1659 25234 39 0 0 0 tail Nov 9 19:07:16 vs302 kernel: [ 1660] 0 1660 89903 85712 0 0 0 setsebool Nov 9 19:07:16 vs302 kernel: Out of memory: Kill process 1660 (setsebool) score 568 or sacrifice child Nov 9 19:07:16 vs302 kernel: Killed process 1660, UID 0, (setsebool) total-vm:359612kB, anon-rss:342708kB, file-rss:140kB

  Read the article

• Async ignored on AJAX requests on Nginx server

  - by eComEvo

  Despite sending an async request to the server over AJAX, the server will not respond until the previous unrelated request has finished. The following code is only broken in this way on Nginx, but runs perfectly on Apache. This call will start a background process and it waits for it to complete so it can display the final result. $.ajax({ type: 'GET', async: true, url: $(this).data('route'), data: $('input[name=data]').val(), dataType: 'json', success: function (data) { /* do stuff */} error: function (data) { /* handle errors */} }); The below is called after the above, which on Apache requires 100ms to execute and repeats itself, showing progress for data being written in the background: checkStatusInterval = setInterval(function () { $.ajax({ type: 'GET', async: false, cache: false, url: '/process-status?process=' + currentElement.attr('id'), dataType: 'json', success: function (data) { /* update progress bar and status message */ } }); }, 1000); Unfortunately, when this script is run from nginx, the above progress request never even finishes a single request until the first AJAX request that sent the data is done. If I change the async to TRUE in the above, it executes one every interval, but none of them complete until that very first AJAX request finishes. Here is the main nginx conf file: #user nobody; worker_processes 1; #error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info; #pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; server_names_hash_bucket_size 64; # configure temporary paths # nginx is started with param -p, setting nginx path to serverpack installdir fastcgi_temp_path temp/fastcgi; uwsgi_temp_path temp/uwsgi; scgi_temp_path temp/scgi; client_body_temp_path temp/client-body 1 2; proxy_temp_path temp/proxy; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; #access_log logs/access.log main; # Sendfile copies data between one FD and other from within the kernel. # More efficient than read() + write(), since the requires transferring data to and from the user space. sendfile on; # Tcp_nopush causes nginx to attempt to send its HTTP response head in one packet, # instead of using partial frames. This is useful for prepending headers before calling sendfile, # or for throughput optimization. tcp_nopush on; # don't buffer data-sends (disable Nagle algorithm). Good for sending frequent small bursts of data in real time. tcp_nodelay on; types_hash_max_size 2048; # Timeout for keep-alive connections. Server will close connections after this time. keepalive_timeout 90; # Number of requests a client can make over the keep-alive connection. This is set high for testing. keepalive_requests 100000; # allow the server to close the connection after a client stops responding. Frees up socket-associated memory. reset_timedout_connection on; # send the client a "request timed out" if the body is not loaded by this time. Default 60. client_header_timeout 20; client_body_timeout 60; # If the client stops reading data, free up the stale client connection after this much time. Default 60. send_timeout 60; # Size Limits client_body_buffer_size 64k; client_header_buffer_size 4k; client_max_body_size 8M; # FastCGI fastcgi_connect_timeout 60; fastcgi_send_timeout 120; fastcgi_read_timeout 300; # default: 60 secs; when step debugging with XDEBUG, you need to increase this value fastcgi_buffer_size 64k; fastcgi_buffers 4 64k; fastcgi_busy_buffers_size 128k; fastcgi_temp_file_write_size 128k; # Caches information about open FDs, freqently accessed files. open_file_cache max=200000 inactive=20s; open_file_cache_valid 30s; open_file_cache_min_uses 2; open_file_cache_errors on; # Turn on gzip output compression to save bandwidth. # http://wiki.nginx.org/HttpGzipModule gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; gzip_http_version 1.1; gzip_vary on; gzip_proxied any; #gzip_proxied expired no-cache no-store private auth; gzip_comp_level 6; gzip_buffers 16 8k; gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript application/javascript; # show all files and folders autoindex on; server { # access from localhost only listen 127.0.0.1:80; server_name localhost; root www; # the following default "catch-all" configuration, allows access to the server from outside. # please ensure your firewall allows access to tcp/port 80. check your "skype" config. # listen 80; # server_name _; log_not_found off; charset utf-8; access_log logs/access.log main; # handle files in the root path /www location / { index index.php index.html index.htm; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root www; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9100 # location ~ \.php$ { try_files $uri =404; fastcgi_pass 127.0.0.1:9100; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } # add expire headers location ~* ^.+.(gif|ico|jpg|jpeg|png|flv|swf|pdf|mp3|mp4|xml|txt|js|css)$ { expires 30d; } # deny access to .htaccess files (if Apache's document root concurs with nginx's one) # deny access to git & svn repositories location ~ /(\.ht|\.git|\.svn) { deny all; } } # include config files of "enabled" domains include domains-enabled/*.conf; } Here is the enabled domain conf file: access_log off; access_log C:/server/www/test.dev/logs/access.log; error_log C:/server/www/test.dev/logs/error.log; # HTTP Server server { listen 127.0.0.1:80; server_name test.dev; root C:/server/www/test.dev/public; index index.php; rewrite_log on; default_type application/octet-stream; #include /etc/nginx/mime.types; # Include common configurations. include domains-common/location.conf; } # HTTPS server server { listen 443 ssl; server_name test.dev; root C:/server/www/test.dev/public; index index.php; rewrite_log on; default_type application/octet-stream; #include /etc/nginx/mime.types; # Include common configurations. include domains-common/location.conf; include domains-common/ssl.conf; } Contents of ssl.conf: # OpenSSL for HTTPS connections. ssl on; ssl_certificate C:/server/bin/openssl/certs/cert.pem; ssl_certificate_key C:/server/bin/openssl/certs/cert.key; ssl_session_timeout 5m; ssl_protocols SSLv3 TLSv1 TLSv1.1 TLSv1.2; ssl_ciphers HIGH:!aNULL:!MD5; ssl_prefer_server_ciphers on; # Pass the PHP scripts to FastCGI server listening on 127.0.0.1:9100 location ~ \.php$ { try_files $uri =404; fastcgi_param HTTPS on; fastcgi_pass 127.0.0.1:9100; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } Contents of location.conf: # Remove trailing slash to please Laravel routing system. if (!-d $request_filename) { rewrite ^/(.+)/$ /$1 permanent; } location / { try_files $uri $uri/ /index.php?$query_string; } # We don't need .ht files with nginx. location ~ /(\.ht|\.git|\.svn) { deny all; } # Added cache headers for images. location ~* \.(png|jpg|jpeg|gif)$ { expires 30d; log_not_found off; } # Only 3 hours on CSS/JS to allow me to roll out fixes during early weeks. location ~* \.(js|css)$ { expires 3h; log_not_found off; } # Add expire headers. location ~* ^.+.(gif|ico|jpg|jpeg|png|flv|swf|pdf|mp3|mp4|xml|txt)$ { expires 30d; } # Pass the PHP scripts to FastCGI server listening on 127.0.0.1:9100 location ~ \.php$ { try_files $uri /index.php =404; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; fastcgi_pass 127.0.0.1:9100; } Any ideas where this is going wrong?

  Read the article

• pasenger does not start puppet master under nginx

  - by Anadi Misra

  On the server [root@bangvmpllDA02 logs]# ruby -v ruby 1.8.7 (2011-06-30 patchlevel 352) [x86_64-linux] [root@bangvmpllDA02 logs]# puppet --version 3.0.1 and [root@bangvmpllDA02 logs]# service nginx configtest nginx: the configuration file /apps/nginx/nginx.conf syntax is ok nginx: configuration file /apps/nginx/nginx.conf test is successful [root@bangvmpllDA02 logs]# service nginx status nginx (pid 25923 25921 25920 25917 25908) is running... [root@bangvmpllDA02 logs]# however none of my agents are able to connect to the master, they all fail with errors like so [amisr1@blramisr195602 ~]$ puppet agent --test --verbose --server bangvmpllda02.XXX.com Info: Creating a new SSL certificate request for blramisr195602.XXX.com Info: Certificate Request fingerprint (SHA256): 26:EB:08:1F:82:32:E4:03:7A:64:8E:30:A3:99:93:26:E6:66:B9:B0:49:B6:08:F9:67:CA:1B:0C:00:B9:1D:41 Error: Could not request certificate: Error 405 on SERVER: <html> <head><title>405 Not Allowed</title></head> <body bgcolor="white"> <center><h1>405 Not Allowed</h1></center> <hr><center>nginx</center> </body> </html> Exiting; failed to retrieve certificate and waitforcert is disabled when I check logs on puppet master [root@bangvmpllDA02 logs]# tail puppet_access.log [05/Dec/2012:17:45:18 +0530] "GET /production/certificate/ca? HTTP/1.1" 404 162 "-" "Ruby" [05/Dec/2012:18:32:23 +0530] "PUT /production/certificate_request/sl63anadi.XXX.com HTTP/1.1" 405 166 "-" "-" [05/Dec/2012:18:33:33 +0530] "GET /production/certificate/sl63anadi.XXX.com? HTTP/1.1" 404 162 "-" "-" [05/Dec/2012:18:33:33 +0530] "GET /production/certificate_request/sl63anadi.XXX.com? HTTP/1.1" 404 162 "-" "-" [05/Dec/2012:18:33:33 +0530] "PUT /production/certificate_request/sl63anadi.XXX.com HTTP/1.1" 405 166 "-" "-" and the error logs show that nginx is not really able to process the request well 2012/12/05 18:33:33 [error] 25920#0: *23 open() "/etc/puppet/rack/public/production/certificate/sl63anadi.XXX.com" failed (2: No such file or directory), client: 10.209.47.26, server: , request: "GET /production/certificate/sl63anadi.XXX.com? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" 2012/12/05 18:33:33 [error] 25920#0: *24 open() "/etc/puppet/rack/public/production/certificate_request/sl63anadi.XXX.com" failed (2: No such file or directory), client: 10.209.47.26, server: , request: "GET /production/certificate_request/sl63anadi.XXX.com? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" 2012/12/05 18:47:56 [error] 25923#0: *27 open() "/etc/puppet/rack/public/production/certificate/ca" failed (2: No such file or directory), client: 10.209.47.31, server: , request: "GET /production/certificate/ca? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" 2012/12/05 18:47:56 [error] 25923#0: *28 open() "/etc/puppet/rack/public/production/certificate_request/blramisr195602.XXX.com" failed (2: No such file or directory), client: 10.209.47.31, server: , request: "GET /production/certificate_request/blramisr195602.XXX.com? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" Passenger does not show any application groups either [root@bangvmpllDA02 nginx]# passenger-status ----------- General information ----------- max = 15 count = 0 active = 0 inactive = 0 Waiting on global queue: 0 ----------- Application groups ----------- [root@bangvmpllDA02 nginx]# here's my nginx configuration [root@bangvmpllDA02 logs]# cat ../nginx.conf user puppet; worker_processes 4; #error_log logs/error.log; #error_log logs/error.log notice; error_log logs/error.log info; #pid logs/nginx.pid; events { use epoll; worker_connections 1024; } http { include mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log logs/access.log main; sendfile on; #tcp_nopush on; server_tokens off; #keepalive_timeout 0; keepalive_timeout 120; gzip on; gzip_http_version 1.1; gzip_disable "msie6"; gzip_vary on; gzip_min_length 1100; gzip_buffers 64 8k; gzip_comp_level 3; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml; server { listen 80; server_name bangvmpllda02.XXXX.com; charset utf-8; #access_log logs/http.access.log main; location / { root html; index index.html index.htm index.php; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { root html; fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param SCRIPT_NAME $fastcgi_script_name; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # location ~ /\.ht { access_log off; log_not_found off; deny all; } location ~* \.(jpg|jpeg|gif|png|css|js|ico|xml)$ { access_log off; log_not_found off; expires 2d; } } # Passenger needed for puppet passenger_root /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18; passenger_ruby /usr/bin/ruby; passenger_max_pool_size 15; server { ssl on; listen 8140 default ssl; server_name bangvmpllda02.XXXX.com; passenger_enabled on; passenger_set_cgi_param HTTP_X_CLIENT_DN $ssl_client_s_dn; passenger_set_cgi_param HTTP_X_CLIENT_VERIFY $ssl_client_verify; passenger_min_instances 5; access_log logs/puppet_access.log; error_log logs/puppet_error.log; root /etc/puppet/rack/public; ssl_certificate /var/lib/puppet/ssl/certs/bangvmpllda02.XXX.com.pem; ssl_certificate_key /var/lib/puppet/ssl/private_keys/bangvmpllda02.XXX.com.pem; ssl_crl /var/lib/puppet/ssl/ca/ca_crl.pem; ssl_client_certificate /var/lib/puppet/ssl/certs/ca.pem; ssl_ciphers SSLv2:-LOW:-EXPORT:RC4+RSA; ssl_prefer_server_ciphers on; ssl_verify_client optional; ssl_verify_depth 1; ssl_session_cache shared:SSL:128m; ssl_session_timeout 5m; } } and the puppet.conf [main] # The Puppet log directory. # The default value is '$vardir/log'. logdir = /var/log/puppet # Where Puppet PID files are kept. # The default value is '$vardir/run'. rundir = /var/run/puppet dns_alt_names = devops.XXXX.com,devops confdir = /etc/puppet vardir = /var/lib/puppet storeconfigs = true storeconfigs_backend = puppetdb thin_storeconfigs = false async_storeconfigs = false ssl_client_header = SSL_CLIENT_S_D ssl_client_verify_header = SSL_CLIENT_VERIFY # Where SSL certificates are kept. # The default value is '$confdir/ssl'. ssldir = $vardir/ssl any ideas where am I going wrong? I checkthe directory permissions; /usr/share/puppet, /etc/puppet and /var/lib/puppet (and files inside them) are owned by puppet user.

  Read the article

• Can't connect to samba

  - by Rick

  Windows 7, connecting to Samba shares I have a follow up question from the link above. I am running Samba 3.0.23d on FreeBSD is release 7.1 I changed the policies as described above but still cannot connect to the samba server with the windows 7 or a server 2008. I feel it is a problem with recognizing the new machines on the network. the windows machines can see the samba server, but cannot connect to it or view any of the files. After changing the security policies the samba server asked for network id and password but would not allow the machine to connect, said they were unknown username or bad password. Here is my current config file. there is no sign of encryption anywhere, should I just add the line? not sure what that would do elsewhere. Workgroup = WWOFFSET server string = WWO File Server (%v) security = server username map = /usr/local/etc/smb.users hosts allow = 10. 127. # If you want to automatically load your printer list rather # than setting them up individually then you'll need this ; load printers = yes # you may wish to override the location of the printcap file ; printcap name = /etc/printcap # on SystemV system setting printcap name to lpstat should allow # you to automatically obtain a printer list from the SystemV spool # system ; printcap name = lpstat # It should not be necessary to specify the print system type unless # it is non-standard. Currently supported print systems include: # bsd, cups, sysv, plp, lprng, aix, hpux, qnx ; printing = cups # Uncomment this if you want a guest account, you must add this to /etc/passwd # otherwise the user "nobody" is used ; guest account = pcguest # this tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/log.%m # Put a capping on the size of the log files (in Kb). max log size = 50 # Use password server option only with security = server # The argument list may include: # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] # or to auto-locate the domain controller/s # password server = * ; password server = <NT-Server-Name> password server = SERVER0 # Use the realm option only with security = ads # Specifies the Active Directory realm the host is part of ; realm = MY_REALM # Backend to store user information in. New installations should # use either tdbsam or ldapsam. smbpasswd is available for backwards # compatibility. tdbsam requires no further configuration. ; passdb backend = tdbsam ; passdb backend = smbpasswd # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting. # Note: Consider carefully the location in the configuration file of # this line. The included file is read at that point. ; include = /usr/local/etc/smb.conf.%m # Most people will find that this option gives better performance. # See the chapter 'Samba performance issues' in the Samba HOWTO Collection # and the manual pages for details. # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 socket options = TCP_NODELAY # Configure Samba to use multiple interfaces # If you have multiple network interfaces then you must list them # here. See the man page for details. ; interfaces = 192.168.12.2/24 192.168.13.2/24 # Browser Control Options: # set local master to no if you don't want Samba to become a master # browser on your network. Otherwise the normal election rules apply ; local master = no # OS Level determines the precedence of this server in master browser # elections. The default value should be reasonable ; os level = 33 # Domain Master specifies Samba to be the Domain Master Browser. This # allows Samba to collate browse lists between subnets. Don't use this # if you already have a Windows NT domain controller doing this job ; domain master = yes # Preferred Master causes Samba to force a local browser election on startup # and gives it a slightly higher chance of winning the election ; preferred master = yes # Enable this if you want Samba to be a domain logon server for # Windows95 workstations. ; domain logons = yes # if you enable domain logons then you may want a per-machine or # per user logon script # run a specific logon batch file per workstation (machine) ; logon script = %m.bat # run a specific logon batch file per username ; logon script = %U.bat # Where to store roving profiles (only for Win95 and WinNT) # %L substitutes for this servers netbios name, %U is username # You must uncomment the [Profiles] share below ; logon path = \\%L\Profiles\%U # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server ; wins support = yes # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # WINS Proxy - Tells Samba to answer name resolution queries on # behalf of a non WINS capable client, for this to work there must be # at least one WINS Server on the network. The default is NO. ; wins proxy = yes # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names # via DNS nslookups. The default is NO. dns proxy = no # charset settings ; display charset = ASCII ; unix charset = ASCII ; dos charset = ASCII # These scripts are used on a domain controller or stand-alone # machine to add or delete corresponding unix accounts ; add user script = /usr/sbin/useradd %u ; add group script = /usr/sbin/groupadd %g ; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u ; delete user script = /usr/sbin/userdel %u ; delete user from group script = /usr/sbin/deluser %u %g ; delete group script = /usr/sbin/groupdel %g unix extensions = no

  Read the article

• Printing fails after first print with Centos 6 and HP LaserJet P3015dn printer

  - by Gavin Simpson

  Centos 6 recognises and configures a HP LaserJet P3015dn printer connected via USB. This machine is being configured as a small group file/print server. I can print a test page, which is processed/printed correctly. The next time printing is attempted (say printing a second test page), the page is not printed and the printer is set to disabled. The status of the printer is stated as: Stopped - /usr/lib/cups/backend/hp failed in the printer configuration dialogue. /var/log/cups/error_log contains this information (first two lines were there prior to the failed print job) E [24/Jun/2004:09:12:57 +0100] Returning HTTP Forbidden for Resume-Printer (ipp://localhost/printers/HP-LaserJet-P3010-Series) from localhost E [24/Jun/2004:09:20:59 +0100] Returning HTTP Forbidden for CUPS-Delete-Printer (ipp://localhost/printers/HP-LaserJet-P3010-Series) from localhost D [24/Jun/2004:09:37:28 +0100] [Job 28] The following messages were recorded from 09:36:43 AM to 09:37:28 AM D [24/Jun/2004:09:37:28 +0100] [Job 28] Adding start banner page "none". D [24/Jun/2004:09:37:28 +0100] [Job 28] Adding end banner page "none". D [24/Jun/2004:09:37:28 +0100] [Job 28] File of type application/vnd.cups-banner queued by "gavin". D [24/Jun/2004:09:37:28 +0100] [Job 28] hold_until=0 D [24/Jun/2004:09:37:28 +0100] [Job 28] Queued on "HP-LaserJet-P3010-Series" by "gavin". D [24/Jun/2004:09:37:28 +0100] [Job 28] job-sheets=none,none D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[0]="HP-LaserJet-P3010-Series" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[1]="28" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[2]="gavin" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[3]="Test Page" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[4]="1" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[5]="job-uuid=urn:uuid:b3370a97-4ab6-3451-40a2-6239b13fa3e1 job-originating-host-name=localhost" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[6]="/var/spool/cups/d00028-001" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[0]="CUPS_CACHEDIR=/var/cache/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[1]="CUPS_DATADIR=/usr/share/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[2]="CUPS_DOCROOT=/usr/share/cups/www" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[4]="CUPS_REQUESTROOT=/var/spool/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[5]="CUPS_SERVERBIN=/usr/lib/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[6]="CUPS_SERVERROOT=/etc/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[7]="CUPS_STATEDIR=/var/run/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[8]="HOME=/var/spool/cups/tmp" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[10]="[email protected]" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[11]="SOFTWARE=CUPS/1.4.2" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[12]="TMPDIR=/var/spool/cups/tmp" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[13]="USER=root" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[15]="CUPS_ENCRYPTION=IfRequested" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[16]="IPP_PORT=631" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[17]="CHARSET=utf-8" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[18]="LANG=en_US.UTF-8" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[19]="PPD=/etc/cups/ppd/HP-LaserJet-P3010-Series.ppd" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[20]="RIP_MAX_CACHE=8m" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[21]="CONTENT_TYPE=application/vnd.cups-banner" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[22]="DEVICE_URI=hp:/usb/HP_LaserJet_P3010_Series?serial=VNBV993GM4" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[23]="PRINTER_INFO=Hewlett-Packard HP LaserJet P3010 Series" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[24]="PRINTER_LOCATION=electra.geog.ucl.ac.uk" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[25]="PRINTER=HP-LaserJet-P3010-Series" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[26]="CUPS_FILETYPE=document" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[27]="FINAL_CONTENT_TYPE=application/vnd.cups-postscript" D [24/Jun/2004:09:37:28 +0100] [Job 28] Started filter /usr/lib/cups/filter/bannertops (PID 2858) D [24/Jun/2004:09:37:28 +0100] [Job 28] Started filter /usr/lib/cups/filter/pstops (PID 2859) D [24/Jun/2004:09:37:28 +0100] [Job 28] Started backend /usr/lib/cups/backend/hp (PID 2860) D [24/Jun/2004:09:37:28 +0100] [Job 28] load_banner(filename="/var/spool/cups/d00028-001") D [24/Jun/2004:09:37:28 +0100] [Job 28] Page = 612x792; 12,12 to 600,780 D [24/Jun/2004:09:37:28 +0100] [Job 28] Page = 612x792; 12,12 to 600,780 D [24/Jun/2004:09:37:28 +0100] [Job 28] slow_collate=0, slow_duplex=0, slow_order=0 D [24/Jun/2004:09:37:28 +0100] [Job 28] Before copy_comments - %!PS-Adobe-3.0 D [24/Jun/2004:09:37:28 +0100] [Job 28] %!PS-Adobe-3.0 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%BoundingBox: 12 12 600 780 D [24/Jun/2004:09:37:28 +0100] [Job 28] %cupsRotation: 0 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%Creator: bannertops/CUPS v1.4.2 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%CreationDate: Thu 24 Jun 2004 09:36:43 AM BST D [24/Jun/2004:09:37:28 +0100] [Job 28] %%LanguageLevel: 2 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%DocumentData: Clean7Bit D [24/Jun/2004:09:37:28 +0100] [Job 28] %%Title: (Test Page) D [24/Jun/2004:09:37:28 +0100] [Job 28] %%For: (gavin) D [24/Jun/2004:09:37:28 +0100] [Job 28] %%Pages: 1 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%DocumentSuppliedResources: font Monospace D [24/Jun/2004:09:37:28 +0100] [Job 28] %%+ font Monospace-Bold D [24/Jun/2004:09:37:28 +0100] [Job 28] %%+ font Monospace-BoldOblique D [24/Jun/2004:09:37:28 +0100] [Job 28] %%+ font Monospace-Oblique D [24/Jun/2004:09:37:28 +0100] [Job 28] %%EndComments D [24/Jun/2004:09:37:28 +0100] [Job 28] Before copy_prolog - %%BeginProlog D [24/Jun/2004:09:37:28 +0100] [Job 28] STATE: +connecting-to-device D [24/Jun/2004:09:37:28 +0100] [Job 28] prnt/backend/hp.c 762: ERROR: cannot open channel PRINT D [24/Jun/2004:09:37:28 +0100] [Job 28] Backend returned status 1 (failed) D [24/Jun/2004:09:37:28 +0100] [Job 28] Printer stopped due to backend errors; please consult the error_log file for details. D [24/Jun/2004:09:37:28 +0100] [Job 28] End of messages D [24/Jun/2004:09:37:28 +0100] [Job 28] printer-state=5(stopped) D [24/Jun/2004:09:37:28 +0100] [Job 28] printer-state-message="/usr/lib/cups/backend/hp failed" D [24/Jun/2004:09:37:28 +0100] [Job 28] printer-state-reasons=paused /var/log/messages contains the following reports associated with the recognition of the printer and the failed print job: Jun 24 09:35:07 electra kernel: usb 1-8: new high speed USB device using ehci_hcd and address 2 Jun 24 09:35:07 electra kernel: usb 1-8: New USB device found, idVendor=03f0, idProduct=8d17 Jun 24 09:35:07 electra kernel: usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 24 09:35:07 electra kernel: usb 1-8: Product: HP LaserJet P3010 Series Jun 24 09:35:07 electra kernel: usb 1-8: Manufacturer: Hewlett-Packard Jun 24 09:35:07 electra kernel: usb 1-8: SerialNumber: VNBV993GM4 Jun 24 09:35:07 electra kernel: usb 1-8: configuration #1 chosen from 1 choice Jun 24 09:35:07 electra kernel: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x8D17 Jun 24 09:35:07 electra kernel: usbcore: registered new interface driver usblp Jun 24 09:35:07 electra udev-configure-printer: invalid or missing IEEE 1284 Device ID Jun 24 09:35:08 electra hp[1942]: io/hpmud/pp.c 627: unable to read device-id ret=-1 Jun 24 09:35:09 electra python: io/hpmud/pp.c 627: unable to read device-id ret=-1 Jun 24 09:35:51 electra kernel: usblp0: removed Jun 24 09:37:28 electra hp[2860]: io/hpmud/dot4.c 254: unable to read Dot4ReverseReply data: Resource temporarily unavailable exp=2 act=0 Jun 24 09:37:28 electra hp[2860]: io/hpmud/dot4.c 330: invalid DOT4InitReply: cmd=0, result=20#012, revision=0 Jun 24 09:37:28 electra hp[2860]: prnt/backend/hp.c 762: ERROR: cannot open channel PRINT I am now at a loss as to how to proceed to get this printer working on my Centos machine. How can I configure the machine to print more than a single print job without needing to be unplugged/plugged in repeatedly?

  Read the article

• After segment lost TCP connection never recovers

  - by mvladic

  Take a look at following trace taken with Wireshark: http://dl.dropbox.com/u/145579/trace1.pcap or http://dl.dropbox.com/u/145579/trace2.pcap I will repeat here an interesting part (from trace1.pcap): No. Time Source Destination Protocol Length Info 1850 2012-02-09 13:44:32.609 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=581704 Win=65392 Len=0 1851 2012-02-09 13:44:32.610 192.168.4.213 172.22.37.4 COTP 550 DT TPDU (0) [COTP fragment, 509 bytes] 1852 2012-02-09 13:44:32.639 192.168.4.213 172.22.37.4 COTP 590 DT TPDU (0) [COTP fragment, 509 bytes] 1853 2012-02-09 13:44:32.639 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=582736 Win=65392 Len=0 1854 2012-02-09 13:44:32.657 192.168.4.213 172.22.37.4 TCP 590 [TCP Previous segment lost] 62479 > iso-tsap [ACK] Seq=583232 Ack=345 Win=65191 Len=536 1855 2012-02-09 13:44:32.657 192.168.4.213 172.22.37.4 TCP 108 [TCP segment of a reassembled PDU] 1856 2012-02-09 13:44:32.657 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1853#1] iso-tsap > 62479 [ACK] Seq=345 Ack=582736 Win=65392 Len=0 1857 2012-02-09 13:44:32.657 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1853#2] iso-tsap > 62479 [ACK] Seq=345 Ack=582736 Win=65392 Len=0 1858 2012-02-09 13:44:32.675 192.168.4.213 172.22.37.4 COTP 590 [TCP Fast Retransmission] DT TPDU (0) [COTP fragment, 509 bytes] 1859 2012-02-09 13:44:32.715 192.168.4.213 172.22.37.4 TCP 590 [TCP Retransmission] [TCP segment of a reassembled PDU] 1860 2012-02-09 13:44:32.715 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=583272 Win=65392 Len=0 1861 2012-02-09 13:44:32.796 192.168.4.213 172.22.37.4 COTP 590 [TCP Retransmission] DT TPDU (0) EOT 1862 2012-02-09 13:44:32.945 192.168.4.213 172.22.37.4 TCP 590 [TCP Retransmission] [TCP segment of a reassembled PDU] 1863 2012-02-09 13:44:32.945 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=583808 Win=65392 Len=0 1864 2012-02-09 13:44:32.963 192.168.4.213 172.22.37.4 COTP 590 DT TPDU (0) [COTP fragment, 509 bytes] 1865 2012-02-09 13:44:32.963 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1863#1] iso-tsap > 62479 [ACK] Seq=345 Ack=583808 Win=65392 Len=0 1866 2012-02-09 13:44:32.963 192.168.4.213 172.22.37.4 TCP 576 [TCP segment of a reassembled PDU] 1867 2012-02-09 13:44:32.963 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1863#2] iso-tsap > 62479 [ACK] Seq=345 Ack=583808 Win=65392 Len=0 1868 2012-02-09 13:44:33.235 192.168.4.213 172.22.37.4 COTP 590 [TCP Retransmission] DT TPDU (0) [COTP fragment, 509 bytes] 1869 2012-02-09 13:44:33.434 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=584344 Win=65392 Len=0 1870 2012-02-09 13:44:33.447 192.168.4.213 172.22.37.4 COTP 590 DT TPDU (0) [COTP fragment, 509 bytes] 1871 2012-02-09 13:44:33.447 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1869#1] iso-tsap > 62479 [ACK] Seq=345 Ack=584344 Win=65392 Len=0 1872 2012-02-09 13:44:33.806 192.168.4.213 172.22.37.4 COTP 590 [TCP Retransmission] DT TPDU (0) [COTP fragment, 509 bytes] 1873 2012-02-09 13:44:34.006 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=584880 Win=65392 Len=0 1874 2012-02-09 13:44:34.018 192.168.4.213 172.22.37.4 COTP 590 DT TPDU (0) [COTP fragment, 509 bytes] 1875 2012-02-09 13:44:34.018 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1873#1] iso-tsap > 62479 [ACK] Seq=345 Ack=584880 Win=65392 Len=0 1876 2012-02-09 13:44:34.932 192.168.4.213 172.22.37.4 TCP 590 [TCP Retransmission] [TCP segment of a reassembled PDU] 1877 2012-02-09 13:44:35.132 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=585416 Win=65392 Len=0 1878 2012-02-09 13:44:35.144 192.168.4.213 172.22.37.4 COTP 590 DT TPDU (0) [COTP fragment, 509 bytes] 1879 2012-02-09 13:44:35.144 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1877#1] iso-tsap > 62479 [ACK] Seq=345 Ack=585416 Win=65392 Len=0 1880 2012-02-09 13:44:37.172 192.168.4.213 172.22.37.4 TCP 590 [TCP Retransmission] [TCP segment of a reassembled PDU] 1881 2012-02-09 13:44:37.372 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=585952 Win=65392 Len=0 1882 2012-02-09 13:44:37.385 192.168.4.213 172.22.37.4 COTP 590 DT TPDU (0) [COTP fragment, 509 bytes] 1883 2012-02-09 13:44:37.385 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1881#1] iso-tsap > 62479 [ACK] Seq=345 Ack=585952 Win=65392 Len=0 1884 2012-02-09 13:44:41.632 192.168.4.213 172.22.37.4 TCP 590 [TCP Retransmission] [TCP segment of a reassembled PDU] 1885 2012-02-09 13:44:41.832 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=586488 Win=65392 Len=0 1886 2012-02-09 13:44:41.844 192.168.4.213 172.22.37.4 COTP 590 DT TPDU (0) [COTP fragment, 509 bytes] 1887 2012-02-09 13:44:41.844 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1885#1] iso-tsap > 62479 [ACK] Seq=345 Ack=586488 Win=65392 Len=0 1888 2012-02-09 13:44:50.554 192.168.4.213 172.22.37.4 TCP 590 [TCP Retransmission] [TCP segment of a reassembled PDU] 1889 2012-02-09 13:44:50.753 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=587024 Win=65392 Len=0 1890 2012-02-09 13:44:50.766 192.168.4.213 172.22.37.4 COTP 590 DT TPDU (0) [COTP fragment, 509 bytes] 1891 2012-02-09 13:44:50.766 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1889#1] iso-tsap > 62479 [ACK] Seq=345 Ack=587024 Win=65392 Len=0 1892 2012-02-09 13:45:08.385 192.168.4.213 172.22.37.4 TCP 590 [TCP Retransmission] [TCP segment of a reassembled PDU] 1893 2012-02-09 13:45:08.585 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=587560 Win=65392 Len=0 1894 2012-02-09 13:45:08.598 192.168.4.213 172.22.37.4 COTP 590 DT TPDU (0) [COTP fragment, 509 bytes] 1895 2012-02-09 13:45:08.598 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1893#1] iso-tsap > 62479 [ACK] Seq=345 Ack=587560 Win=65392 Len=0 1896 2012-02-09 13:45:44.059 192.168.4.213 172.22.37.4 TCP 590 [TCP Retransmission] [TCP segment of a reassembled PDU] 1897 2012-02-09 13:45:44.259 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=588096 Win=65392 Len=0 1898 2012-02-09 13:45:44.272 192.168.4.213 172.22.37.4 COTP 590 DT TPDU (0) [COTP fragment, 509 bytes] 1899 2012-02-09 13:45:44.272 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1897#1] iso-tsap > 62479 [ACK] Seq=345 Ack=588096 Win=65392 Len=0 1900 2012-02-09 13:46:55.386 192.168.4.213 172.22.37.4 TCP 590 [TCP Retransmission] [TCP segment of a reassembled PDU] Some background information (not much, unfortunately, as I'm responsible only for server part): Server (172.22.37.4) is Windows Server 2008 R2 and client (192.168.4.213) is Ericsson telephone exchange of whom I do not know much. Client sends a file to server using FTAM protocol. This problem happens very often. I think, either client or server is doing sliding window protocol wrong. Server sends dup ack, client retransmits lost packet, but soon after client sends packets with wrong seq. Again, Server sends dup ack, client retransmits lost packet - but, this time with longer retransmission timeout. Again, client sends packet with wrong seq. Etc... Retransmission timeout grows to circa 4 minutes and communications never recovers to normal.

  Read the article

• Configuring OpenLDAP and SSL

  - by Stormshadow

  I am having trouble trying to connect to a secure OpenLDAP server which I have set up. On running my LDAP client code java -Djavax.net.debug=ssl LDAPConnector I get the following exception trace (java version 1.6.0_17) trigger seeding of SecureRandom done seeding SecureRandom %% No cached client session *** ClientHello, TLSv1 RandomCookie: GMT: 1256110124 bytes = { 224, 19, 193, 148, 45, 205, 108, 37, 101, 247, 112, 24, 157, 39, 111, 177, 43, 53, 206, 224, 68, 165, 55, 185, 54, 203, 43, 91 } Session ID: {} Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_W ITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SH A, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA] Compression Methods: { 0 } *** Thread-0, WRITE: TLSv1 Handshake, length = 73 Thread-0, WRITE: SSLv2 client hello message, length = 98 Thread-0, received EOFException: error Thread-0, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake Thread-0, SEND TLSv1 ALERT: fatal, description = handshake_failure Thread-0, WRITE: TLSv1 Alert, length = 2 Thread-0, called closeSocket() main, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake javax.naming.CommunicationException: simple bind failed: ldap.natraj.com:636 [Root exception is javax.net.ssl.SSLHandshakeException: Remote host closed connection during hands hake] at com.sun.jndi.ldap.LdapClient.authenticate(Unknown Source) at com.sun.jndi.ldap.LdapCtx.connect(Unknown Source) at com.sun.jndi.ldap.LdapCtx.<init>(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(Unknown Source) at javax.naming.spi.NamingManager.getInitialContext(Unknown Source) at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source) at javax.naming.InitialContext.init(Unknown Source) at javax.naming.InitialContext.<init>(Unknown Source) at javax.naming.directory.InitialDirContext.<init>(Unknown Source) at LDAPConnector.CallSecureLDAPServer(LDAPConnector.java:43) at LDAPConnector.main(LDAPConnector.java:237) Caused by: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(Unknown Source) at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source) at java.io.BufferedInputStream.fill(Unknown Source) at java.io.BufferedInputStream.read1(Unknown Source) at java.io.BufferedInputStream.read(Unknown Source) at com.sun.jndi.ldap.Connection.run(Unknown Source) at java.lang.Thread.run(Unknown Source) Caused by: java.io.EOFException: SSL peer shut down incorrectly at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source) ... 9 more I am able to connect to the same secure LDAP server however if I use another version of java (1.6.0_14) I have created and installed the server certificates in the cacerts of both the JRE's as mentioned in this guide -- OpenLDAP with SSL When I run ldapsearch -x on the server I get # extended LDIF # # LDAPv3 # base <dc=localdomain> (default) with scope subtree # filter: (objectclass=*) # requesting: ALL # # localdomain dn: dc=localdomain objectClass: top objectClass: dcObject objectClass: organization o: localdomain dc: localdomain # admin, localdomain dn: cn=admin,dc=localdomain objectClass: simpleSecurityObject objectClass: organizationalRole cn: admin description: LDAP administrator # search result search: 2 result: 0 Success # numResponses: 3 # numEntries: 2 On running openssl s_client -connect ldap.natraj.com:636 -showcerts , I obtain the self signed certificate. My slapd.conf file is as follows ####################################################################### # Global Directives: # Features to permit #allow bind_v2 # Schema and objectClass definitions include /etc/ldap/schema/core.schema include /etc/ldap/schema/cosine.schema include /etc/ldap/schema/nis.schema include /etc/ldap/schema/inetorgperson.schema # Where the pid file is put. The init.d script # will not stop the server if you change this. pidfile /var/run/slapd/slapd.pid # List of arguments that were passed to the server argsfile /var/run/slapd/slapd.args # Read slapd.conf(5) for possible values loglevel none # Where the dynamically loaded modules are stored modulepath /usr/lib/ldap moduleload back_hdb # The maximum number of entries that is returned for a search operation sizelimit 500 # The tool-threads parameter sets the actual amount of cpu's that is used # for indexing. tool-threads 1 ####################################################################### # Specific Backend Directives for hdb: # Backend specific directives apply to this backend until another # 'backend' directive occurs backend hdb ####################################################################### # Specific Backend Directives for 'other': # Backend specific directives apply to this backend until another # 'backend' directive occurs #backend <other> ####################################################################### # Specific Directives for database #1, of type hdb: # Database specific directives apply to this databasse until another # 'database' directive occurs database hdb # The base of your directory in database #1 suffix "dc=localdomain" # rootdn directive for specifying a superuser on the database. This is needed # for syncrepl. rootdn "cn=admin,dc=localdomain" # Where the database file are physically stored for database #1 directory "/var/lib/ldap" # The dbconfig settings are used to generate a DB_CONFIG file the first # time slapd starts. They do NOT override existing an existing DB_CONFIG # file. You should therefore change these settings in DB_CONFIG directly # or remove DB_CONFIG and restart slapd for changes to take effect. # For the Debian package we use 2MB as default but be sure to update this # value if you have plenty of RAM dbconfig set_cachesize 0 2097152 0 # Sven Hartge reported that he had to set this value incredibly high # to get slapd running at all. See http://bugs.debian.org/303057 for more # information. # Number of objects that can be locked at the same time. dbconfig set_lk_max_objects 1500 # Number of locks (both requested and granted) dbconfig set_lk_max_locks 1500 # Number of lockers dbconfig set_lk_max_lockers 1500 # Indexing options for database #1 index objectClass eq # Save the time that the entry gets modified, for database #1 lastmod on # Checkpoint the BerkeleyDB database periodically in case of system # failure and to speed slapd shutdown. checkpoint 512 30 # Where to store the replica logs for database #1 # replogfile /var/lib/ldap/replog # The userPassword by default can be changed # by the entry owning it if they are authenticated. # Others should not be able to see it, except the # admin entry below # These access lines apply to database #1 only access to attrs=userPassword,shadowLastChange by dn="cn=admin,dc=localdomain" write by anonymous auth by self write by * none # Ensure read access to the base for things like # supportedSASLMechanisms. Without this you may # have problems with SASL not knowing what # mechanisms are available and the like. # Note that this is covered by the 'access to *' # ACL below too but if you change that as people # are wont to do you'll still need this if you # want SASL (and possible other things) to work # happily. access to dn.base="" by * read # The admin dn has full write access, everyone else # can read everything. access to * by dn="cn=admin,dc=localdomain" write by * read # For Netscape Roaming support, each user gets a roaming # profile for which they have write access to #access to dn=".*,ou=Roaming,o=morsnet" # by dn="cn=admin,dc=localdomain" write # by dnattr=owner write ####################################################################### # Specific Directives for database #2, of type 'other' (can be hdb too): # Database specific directives apply to this databasse until another # 'database' directive occurs #database <other> # The base of your directory for database #2 #suffix "dc=debian,dc=org" ####################################################################### # SSL: # Uncomment the following lines to enable SSL and use the default # snakeoil certificates. #TLSCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem #TLSCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key TLSCipherSuite TLS_RSA_AES_256_CBC_SHA TLSCACertificateFile /etc/ldap/ssl/server.pem TLSCertificateFile /etc/ldap/ssl/server.pem TLSCertificateKeyFile /etc/ldap/ssl/server.pem My ldap.conf file is # # LDAP Defaults # # See ldap.conf(5) for details # This file should be world readable but not world writable. HOST ldap.natraj.com PORT 636 BASE dc=localdomain URI ldaps://ldap.natraj.com TLS_CACERT /etc/ldap/ssl/server.pem TLS_REQCERT allow #SIZELIMIT 12 #TIMELIMIT 15 #DEREF never Why is it that I can connect to the same server using one version of JRE while I cannot with another ?

  Read the article

• Can't get simple Apache VHost up and running

  - by TK Kocheran

  Unfortunately, I can't seem to get a simple Apache VHost online. I used to simply have one VHost which bound to all: <VirtualHost *:80>, but this isn't appropriate for security anymore. I need to have one VHost for localhost requests (ie my dev server) and one for incoming requests via my domain name. Here's my new VHost: NameVirtualHost domain1.com <VirtualHost domain1.com:80> DocumentRoot /var/www ServerName domain1.com </VirtualHost> <VirtualHost domain2.com:80> DocumentRoot /var/www ServerName domain2.com </VirtualHost> After I restart my server, I see the following errors in my log: [Wed Feb 16 11:26:36 2011] [error] [client ####.###.###.###] File does not exist: /htdocs [Wed Feb 16 11:26:36 2011] [error] [client ####.###.###.###] File does not exist: /htdocs What am I doing wrong? EDIT As per the answer give below, I have modified my configuration. Here are my configuration files: /etc/apache2/ports.conf: Listen 80 <IfModule mod_ssl.c> # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to <VirtualHost *:443> # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> Here are my actual defined sites: /etc/apache2/sites-enabled/000-localhost: NameVirtualHost 127.0.0.1:80 <VirtualHost 127.0.0.1:80> ServerAdmin ######### DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> RewriteEngine On RewriteLog "/var/log/apache2/mod_rewrite.log" RewriteLogLevel 9 <Location /> <Limit GET POST PUT> order allow,deny allow from all deny from 65.34.248.110 deny from 69.122.239.3 deny from 58.218.199.147 deny from 65.34.248.110 </Limit> </Location> </VirtualHost> /etc/apache2/sites-enabled/001-rfkrocktk.dyndns.org: NameVirtualHost rfkrocktk.dyndns.org:80 <VirtualHost rfkrocktk.dyndns.org:80> DocumentRoot /var/www ServerName rfkrocktk.dyndns.org </VirtualHost> And, just for kicks, my main file: /etc/apache2/apache2.conf: # # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.2/ for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log" # with ServerRoot set to "" will be interpreted by the # server as "//var/log/apache2/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation (available # at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/etc/apache2" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # #<IfModule !mpm_winnt.c> #<IfModule !mpm_netware.c> LockFile /var/lock/apache2/accept.lock #</IfModule> #</IfModule> # # PidFile: The file in which the server should record its process # identification number when it starts. # This needs to be set in /etc/apache2/envvars # PidFile ${APACHE_PID_FILE} # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # event MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_event_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog /var/log/apache2/error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # Include module configuration: Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf # Include all the user configurations: Include /etc/apache2/httpd.conf # Include ports listing Include /etc/apache2/ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # # Define an access log for VirtualHosts that don't define their own logfile CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined # Include of directories ignores editors' and dpkg's backup files, # see README.Debian for details. # Include generic snippets of statements Include /etc/apache2/conf.d/ # Include the virtual host configurations: Include /etc/apache2/sites-enabled/ what else do I need to do to fix it? Should I be telling apache to listen on 127.0.0.1:80, or isn't it already listening there?

  Read the article

• Sendmail to local domain ignoring MX records (part 2)

  - by FractalizeR

  Hello. I have the exact problem, like in this post: http://serverfault.com/questions/25068/sendmail-to-local-domain-ignoring-mx-records I am also using email provider like GMail For Your Domain (which stores your mail and manages it). I am sending mail from my server directly, but receiving mail is done via Yandex (email provider). Since the server hosts forum, I prefer to send mail directly from it because using another mail provider can slow things. Also, when I send 300.000 emails to my subscribers, email provider will surely block me thinking I send spam. My DNS zone now is: ; ; GSMFORUM.RU ; $TTL 1H gsmforum.ru. SOA ns1.hc.ru. support.hc.ru. ( 2009122268 ; Serial 1H ; Refresh 30M ; Retry 1W ; Expire 1H ) ; Minimum gsmforum.ru. NS ns1.hc.ru. gsmforum.ru. NS ns2.hc.ru. @ A 79.174.68.223 *.gsmforum.ru. CNAME @ ns1 A 79.174.68.223 ns2 A 79.174.68.224 @ MX 10 mx.yandex.ru. mail CNAME domain.mail.yandex.net. yamail-xxxxxxxxx CNAME mail.yandex.ru. Server hostname is server.gsmforum.ru. May be this is the cause? Can someone explain the reason of the matter (the rules that make sendmail consider domain to be local)? Can I easily change *.gsmforum.ru. CNAME @ into *.gsmforum.ru. A 79.174.68.224 to solve this problem? [root@server ~]# cat /etc/mail/local-host-names localhost localhost.localdomain This server hosts gsmforum.ru so I cannot put it into another domain like David Mackintosh suggests. Putting domain in mailertable doesn't solve the problem also. sendmail -bt still shows, that address is local. DontProbeInterfaces is also set to true at sendmail config. M4 file follows: divert(-1)dnl dnl # dnl # This is the sendmail macro config file for m4. If you make changes to dnl # /etc/mail/sendmail.mc, you will need to regenerate the dnl # /etc/mail/sendmail.cf file by confirming that the sendmail-cf package is dnl # installed and then performing a dnl # dnl # make -C /etc/mail dnl # include(`/usr/share/sendmail-cf/m4/cf.m4')dnl VERSIONID(`setup for linux')dnl OSTYPE(`linux')dnl dnl # dnl # Do not advertize sendmail version. dnl # dnl define(`confSMTP_LOGIN_MSG', `$j Sendmail; $b')dnl dnl # dnl # default logging level is 9, you might want to set it higher to dnl # debug the configuration dnl # dnl define(`confLOG_LEVEL', `9')dnl dnl # dnl # Uncomment and edit the following line if your outgoing mail needs to dnl # be sent out through an external mail server: dnl # dnl define(`SMART_HOST', `smtp.your.provider')dnl dnl # define(`confDEF_USER_ID', ``8:12'')dnl dnl define(`confAUTO_REBUILD')dnl define(`confTO_CONNECT', `1m')dnl define(`confTRY_NULL_MX_LIST', `True')dnl define(`confDONT_PROBE_INTERFACES',`True') define(`PROCMAIL_MAILER_PATH', `/usr/bin/procmail')dnl define(`ALIAS_FILE', `/etc/aliases')dnl define(`STATUS_FILE', `/var/log/mail/statistics')dnl define(`UUCP_MAILER_MAX', `2000000')dnl define(`confUSERDB_SPEC', `/etc/mail/userdb.db')dnl define(`confPRIVACY_FLAGS', `authwarnings,novrfy,noexpn,restrictqrun')dnl define(`confAUTH_OPTIONS', `A')dnl dnl # dnl # The following allows relaying if the user authenticates, and disallows dnl # plaintext authentication (PLAIN/LOGIN) on non-TLS links dnl # dnl define(`confAUTH_OPTIONS', `A p')dnl dnl # dnl # PLAIN is the preferred plaintext authentication method and used by dnl # Mozilla Mail and Evolution, though Outlook Express and other MUAs do dnl # use LOGIN. Other mechanisms should be used if the connection is not dnl # guaranteed secure. dnl # Please remember that saslauthd needs to be running for AUTH. dnl # dnl TRUST_AUTH_MECH(`EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl dnl define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl dnl # dnl # Rudimentary information on creating certificates for sendmail TLS: dnl # cd /usr/share/ssl/certs; make sendmail.pem dnl # Complete usage: dnl # make -C /usr/share/ssl/certs usage dnl # dnl define(`confCACERT_PATH', `/etc/pki/tls/certs')dnl dnl define(`confCACERT', `/etc/pki/tls/certs/ca-bundle.crt')dnl dnl define(`confSERVER_CERT', `/etc/pki/tls/certs/sendmail.pem')dnl dnl define(`confSERVER_KEY', `/etc/pki/tls/certs/sendmail.pem')dnl dnl # dnl # This allows sendmail to use a keyfile that is shared with OpenLDAP's dnl # slapd, which requires the file to be readble by group ldap dnl # dnl define(`confDONT_BLAME_SENDMAIL', `groupreadablekeyfile')dnl dnl # dnl define(`confTO_QUEUEWARN', `4h')dnl dnl define(`confTO_QUEUERETURN', `5d')dnl dnl define(`confQUEUE_LA', `12')dnl dnl define(`confREFUSE_LA', `18')dnl define(`confTO_IDENT', `0')dnl dnl FEATURE(delay_checks)dnl FEATURE(`no_default_msa', `dnl')dnl FEATURE(`smrsh', `/usr/sbin/smrsh')dnl FEATURE(`mailertable', `hash -o /etc/mail/mailertable.db')dnl FEATURE(`virtusertable', `hash -o /etc/mail/virtusertable.db')dnl FEATURE(redirect)dnl FEATURE(always_add_domain)dnl FEATURE(use_cw_file)dnl FEATURE(use_ct_file)dnl dnl # dnl # The following limits the number of processes sendmail can fork to accept dnl # incoming messages or process its message queues to 20.) sendmail refuses dnl # to accept connections once it has reached its quota of child processes. dnl # dnl define(`confMAX_DAEMON_CHILDREN', `20')dnl dnl # dnl # Limits the number of new connections per second. This caps the overhead dnl # incurred due to forking new sendmail processes. May be useful against dnl # DoS attacks or barrages of spam. (As mentioned below, a per-IP address dnl # limit would be useful but is not available as an option at this writing.) dnl # dnl define(`confCONNECTION_RATE_THROTTLE', `3')dnl dnl # dnl # The -t option will retry delivery if e.g. the user runs over his quota. dnl # FEATURE(local_procmail, `', `procmail -t -Y -a $h -d $u')dnl FEATURE(`access_db', `hash -T<TMPF> -o /etc/mail/access.db')dnl FEATURE(`blacklist_recipients')dnl EXPOSED_USER(`root')dnl dnl # dnl # For using Cyrus-IMAPd as POP3/IMAP server through LMTP delivery uncomment dnl # the following 2 definitions and activate below in the MAILER section the dnl # cyrusv2 mailer. dnl # dnl define(`confLOCAL_MAILER', `cyrusv2')dnl dnl define(`CYRUSV2_MAILER_ARGS', `FILE /var/lib/imap/socket/lmtp')dnl dnl # dnl # The following causes sendmail to only listen on the IPv4 loopback address dnl # 127.0.0.1 and not on any other network devices. Remove the loopback dnl # address restriction to accept email from the internet or intranet. dnl # DAEMON_OPTIONS(`Name=MTA,Port=smtp') dnl # dnl # The following causes sendmail to additionally listen to port 587 for dnl # mail from MUAs that authenticate. Roaming users who can't reach their dnl # preferred sendmail daemon due to port 25 being blocked or redirected find dnl # this useful. dnl # dnl DAEMON_OPTIONS(`Port=submission, Name=MSA, M=Ea')dnl dnl # dnl # The following causes sendmail to additionally listen to port 465, but dnl # starting immediately in TLS mode upon connecting. Port 25 or 587 followed dnl # by STARTTLS is preferred, but roaming clients using Outlook Express can't dnl # do STARTTLS on ports other than 25. Mozilla Mail can ONLY use STARTTLS dnl # and doesn't support the deprecated smtps; Evolution <1.1.1 uses smtps dnl # when SSL is enabled-- STARTTLS support is available in version 1.1.1. dnl # dnl # For this to work your OpenSSL certificates must be configured. dnl # dnl DAEMON_OPTIONS(`Port=smtps, Name=TLSMTA, M=s')dnl dnl # dnl # The following causes sendmail to additionally listen on the IPv6 loopback dnl # device. Remove the loopback address restriction listen to the network. dnl # dnl DAEMON_OPTIONS(`port=smtp,Addr=::1, Name=MTA-v6, Family=inet6')dnl dnl # dnl # enable both ipv6 and ipv4 in sendmail: dnl # dnl DAEMON_OPTIONS(`Name=MTA-v4, Family=inet, Name=MTA-v6, Family=inet6') dnl # dnl # We strongly recommend not accepting unresolvable domains if you want to dnl # protect yourself from spam. However, the laptop and users on computers dnl # that do not have 24x7 DNS do need this. dnl # FEATURE(`accept_unresolvable_domains')dnl dnl # dnl FEATURE(`relay_based_on_MX')dnl dnl # dnl # Also accept email sent to "localhost.localdomain" as local email. dnl # LOCAL_DOMAIN(`localhost.localdomain')dnl dnl # dnl # The following example makes mail from this host and any additional dnl # specified domains appear to be sent from mydomain.com dnl # dnl MASQUERADE_AS(`mydomain.com')dnl dnl # dnl # masquerade not just the headers, but the envelope as well dnl # dnl FEATURE(masquerade_envelope)dnl dnl # dnl # masquerade not just @mydomainalias.com, but @*.mydomainalias.com as well dnl # dnl FEATURE(masquerade_entire_domain)dnl dnl # dnl MASQUERADE_DOMAIN(localhost)dnl dnl MASQUERADE_DOMAIN(localhost.localdomain)dnl dnl MASQUERADE_DOMAIN(mydomainalias.com)dnl dnl MASQUERADE_DOMAIN(mydomain.lan)dnl MAILER(smtp)dnl MAILER(procmail)dnl dnl MAILER(cyrusv2)dnl FEATURE(`dnsbl',`zen.spamhaus.org',`Rejected - your IP is blacklisted by http://www.spamhaus.org')

  Read the article

• IRQ problem with 2.6.32/2.6.39 kernel on Debian Squeeze x86_64

  - by MasterM

  I recently assembled a new computer so that all hardware is pretty new. Since then I've been experiencing some problem with IRQs when running Debian 6.0. On random occasions, usually after an hour or so of running I hear a beep and this shows up in dmesg: [ 3537.762795] irq 16: nobody cared (try booting with the "irqpoll" option) [ 3537.762797] Pid: 0, comm: swapper Tainted: P W O 2.6.39-2-amd64 #1 [ 3537.762798] Call Trace: [ 3537.762799] <IRQ> [<ffffffff810924d4>] ? __report_bad_irq+0x3a/0xa2 [ 3537.762803] [<ffffffff810926a4>] ? note_interrupt+0x168/0x1da [ 3537.762805] [<ffffffff81090dd4>] ? handle_irq_event_percpu+0x171/0x18f [ 3537.762807] [<ffffffff8100e0e2>] ? read_tsc+0x5/0x16 [ 3537.762809] [<ffffffff8106b8a2>] ? update_ts_time_stats+0x32/0x6b [ 3537.762810] [<ffffffff81090e26>] ? handle_irq_event+0x34/0x52 [ 3537.762812] [<ffffffff81063fb7>] ? sched_clock_idle_wakeup_event+0x12/0x1c [ 3537.762813] [<ffffffff81092df2>] ? handle_fasteoi_irq+0x82/0xa4 [ 3537.762815] [<ffffffff8100aadb>] ? handle_irq+0x1a/0x23 [ 3537.762816] [<ffffffff8100a384>] ? do_IRQ+0x45/0xaa [ 3537.762818] [<ffffffff81332c93>] ? common_interrupt+0x13/0x13 [ 3537.762818] <EOI> [<ffffffff81332c8e>] ? common_interrupt+0xe/0x13 [ 3537.762821] [<ffffffff81026800>] ? native_safe_halt+0x2/0x3 [ 3537.762829] [<ffffffffa016ed58>] ? acpi_idle_do_entry+0x39/0x62 [processor] [ 3537.762831] [<ffffffffa016edde>] ? acpi_idle_enter_c1+0x5d/0xad [processor] [ 3537.762834] [<ffffffff81261033>] ? cpuidle_idle_call+0x11f/0x1cc [ 3537.762835] [<ffffffff81008dd2>] ? cpu_idle+0xab/0xe1 [ 3537.762837] [<ffffffff8169fc60>] ? start_kernel+0x3e0/0x3eb [ 3537.762838] [<ffffffff8169f3c8>] ? x86_64_start_kernel+0x102/0x10f [ 3537.762839] handlers: [ 3537.762840] [<ffffffffa0358d5a>] (rtl8169_interrupt+0x0/0x2d7 [r8169]) [ 3537.762842] [<ffffffffa08ff2ca>] (nv_kern_isr+0x0/0x54 [nvidia]) [ 3537.762902] Disabling IRQ #16 After that Xorg either hogs on CPU or is unstable (up to hanging the system completely). When I restart Xorg everything is fine again and the problem doesn't occur until next reboot. I tried to upgrade the kernel from stock 2.6.32 to 2.6.39 from unstable repository but that didn't help. Booting with irqpoll option only seems to prolong the initial time period after which the problem occurs. I'm using latest NVIDIA drivers and Realtek firmware from firmware-realtek package. I have two GTX 560Ti that run in SLI. Disabling SLI or taking out one card completely doesn't solve the problem either. Output of uname -a is: Linux whitestar 2.6.39-2-amd64 #1 SMP Wed Jun 8 11:01:04 UTC 2011 x86_64 GNU/Linux Output of lspci is: 00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:01.1 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 05) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.2 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 5 (rev b5) 00:1c.6 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation Device 1200 (rev a1) 01:00.1 Audio device: nVidia Corporation Device 0e0c (rev a1) 02:00.0 VGA compatible controller: nVidia Corporation Device 1200 (rev a1) 02:00.1 Audio device: nVidia Corporation Device 0e0c (rev a1) 04:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) 06:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) 07:00.0 PCI bridge: Device 1b21:1080 (rev 01) 08:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) 08:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) Contents of /proc/interrupts: CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 0: 77 0 0 0 0 0 0 0 IO-APIC-edge timer 1: 2 0 0 0 0 0 0 0 IO-APIC-edge i8042 8: 1 0 0 0 0 0 0 0 IO-APIC-edge rtc0 9: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi acpi 12: 4 0 0 0 0 0 0 0 IO-APIC-edge i8042 16: 699083 0 0 0 0 0 0 0 IO-APIC-fasteoi nvidia, eth0 17: 87810 0 0 0 0 0 0 0 IO-APIC-fasteoi firewire_ohci, hda_intel, nvidia 18: 242 0 0 0 0 0 0 0 IO-APIC-fasteoi hda_intel 23: 85925 0 0 0 0 0 0 0 IO-APIC-fasteoi ehci_hcd:usb5, ehci_hcd:usb6 40: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 41: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 42: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 43: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 44: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 45: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 46: 79853 0 0 0 0 0 0 0 PCI-MSI-edge ahci 48: 1 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 49: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 50: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 51: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 52: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 53: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 54: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 55: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 56: 1 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 57: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 58: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 59: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 60: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 61: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 62: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 63: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 64: 173506 0 0 0 0 0 0 0 PCI-MSI-edge hda_intel NMI: 482 89 25 13 277 24 11 10 Non-maskable interrupts LOC: 783857 194752 114133 70577 372438 179065 117179 162016 Local timer interrupts SPU: 0 0 0 0 0 0 0 0 Spurious interrupts PMI: 482 89 25 13 277 24 11 10 Performance monitoring interrupts IWI: 0 0 0 0 0 0 0 0 IRQ work interrupts RES: 131917 46750 7432 3291 150003 9576 3435 3067 Rescheduling interrupts CAL: 2759 6563 7150 6997 5387 7140 7269 6678 Function call interrupts TLB: 4396 2038 1336 492 5434 1896 1121 606 TLB shootdowns TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 0 0 0 0 Machine check exceptions MCP: 37 37 37 37 37 37 37 37 Machine check polls ERR: 0 MIS: 0 Last but not least, right after boot-up those lines are usually present in dmesg: [ 18.367094] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 18.458859] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj. I'm not sure if it's related or a symptom of a bigger problem so I'm posting it just in case. I don't really know what other information might be of relevance here. Don't hesitate to ask for more in the comments.

  Read the article

• ubuntu 10.04 logs itself out overnight

  - by Corey

  Every night when I leave work, I lock the screen via ubuntu's "power" button in the top right hand panel. When I come to work in the morning, I'm greeted with the log-in screen. This doesn't happen every night, but most. I'm running ubuntu 10.04 on a Dell inspiron. I've included some HW specs, and also dmesg output. Please let me know what other logs may be useful. thanks! Corey ~$ dmesg [20559.696062] type=1503 audit(1285957687.048:16): operation="open" pid=6212 parent=1 profile="/usr/bin/evince" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/usr/local/lib/libltdl.so.7.2.2" [21127.951621] type=1503 audit(1285958255.300:17): operation="open" pid=6390 parent=1 profile="/usr/bin/evince" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/usr/local/lib/libltdl.so.7.2.2" [291038.528014] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [291038.528025] render error detected, EIR: 0x00000000 [291038.528042] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 22973891 at 22973890) [291038.828014] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [291038.828023] render error detected, EIR: 0x00000000 [291038.828042] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 22973894 at 22973890) ~$ lspci -vv 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) Subsystem: Dell Device 02e1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) Subsystem: Dell Device 02e1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 27 Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at dc00 [size=8] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) Subsystem: Dell Device 02e1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at feaf8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: 80000000-801fffff Prefetchable memory behind bridge: 0000000080200000-00000000803fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at d880 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at d800 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at d480 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at d400 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) (prog-if 20) Subsystem: Dell Device 02e1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at feaf7c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt, intel-rng 00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at d080 [size=8] Region 1: I/O ports at d000 [size=4] Region 2: I/O ports at cc00 [size=8] Region 3: I/O ports at c880 [size=4] Region 4: I/O ports at c800 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 4: I/O ports at 0400 [size=32] Kernel modules: i2c-i801 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) Subsystem: Dell Device 02e1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 26 Region 0: I/O ports at e800 [size=256] Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fdfe0000 (64-bit, prefetchable) [size=64K] Expansion ROM at febe0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 log$ tail -n 15 Xorg.0.log.old for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. (II) Power Button: Close (II) UnloadModule: "evdev" (II) Power Button: Close (II) UnloadModule: "evdev" (II) USB Optical Mouse: Close (II) UnloadModule: "evdev" (II) Dell Dell USB Entry Keyboard: Close (II) UnloadModule: "evdev" (II) Macintosh mouse button emulation: Close (II) UnloadModule: "evdev" (II) AIGLX: Suspending AIGLX clients for VT switch ddxSigGiveUp: Closing log

  Read the article

• solved: passenger(mod_rails) fails to start puppet master under nginx

  - by Anadi Misra

  On the server [root@bangvmpllDA02 logs]# ruby -v ruby 1.8.7 (2011-06-30 patchlevel 352) [x86_64-linux] [root@bangvmpllDA02 logs]# puppet --version 3.0.1 and [root@bangvmpllDA02 logs]# service nginx configtest nginx: the configuration file /apps/nginx/nginx.conf syntax is ok nginx: configuration file /apps/nginx/nginx.conf test is successful [root@bangvmpllDA02 logs]# service nginx status nginx (pid 25923 25921 25920 25917 25908) is running... [root@bangvmpllDA02 logs]# however none of my agents are able to connect to the master, they all fail with errors like so [amisr1@blramisr195602 ~]$ puppet agent --test --verbose --server bangvmpllda02.XXX.com Info: Creating a new SSL certificate request for blramisr195602.XXX.com Info: Certificate Request fingerprint (SHA256): 26:EB:08:1F:82:32:E4:03:7A:64:8E:30:A3:99:93:26:E6:66:B9:B0:49:B6:08:F9:67:CA:1B:0C:00:B9:1D:41 Error: Could not request certificate: Error 405 on SERVER: <html> <head><title>405 Not Allowed</title></head> <body bgcolor="white"> <center><h1>405 Not Allowed</h1></center> <hr><center>nginx</center> </body> </html> Exiting; failed to retrieve certificate and waitforcert is disabled when I check logs on puppet master [root@bangvmpllDA02 logs]# tail puppet_access.log [05/Dec/2012:17:45:18 +0530] "GET /production/certificate/ca? HTTP/1.1" 404 162 "-" "Ruby" [05/Dec/2012:18:32:23 +0530] "PUT /production/certificate_request/sl63anadi.XXX.com HTTP/1.1" 405 166 "-" "-" [05/Dec/2012:18:33:33 +0530] "GET /production/certificate/sl63anadi.XXX.com? HTTP/1.1" 404 162 "-" "-" [05/Dec/2012:18:33:33 +0530] "GET /production/certificate_request/sl63anadi.XXX.com? HTTP/1.1" 404 162 "-" "-" [05/Dec/2012:18:33:33 +0530] "PUT /production/certificate_request/sl63anadi.XXX.com HTTP/1.1" 405 166 "-" "-" and the error logs show that nginx is not really able to process the request well 2012/12/05 18:33:33 [error] 25920#0: *23 open() "/etc/puppet/rack/public/production/certificate/sl63anadi.XXX.com" failed (2: No such file or directory), client: 10.209.47.26, server: , request: "GET /production/certificate/sl63anadi.XXX.com? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" 2012/12/05 18:33:33 [error] 25920#0: *24 open() "/etc/puppet/rack/public/production/certificate_request/sl63anadi.XXX.com" failed (2: No such file or directory), client: 10.209.47.26, server: , request: "GET /production/certificate_request/sl63anadi.XXX.com? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" 2012/12/05 18:47:56 [error] 25923#0: *27 open() "/etc/puppet/rack/public/production/certificate/ca" failed (2: No such file or directory), client: 10.209.47.31, server: , request: "GET /production/certificate/ca? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" 2012/12/05 18:47:56 [error] 25923#0: *28 open() "/etc/puppet/rack/public/production/certificate_request/blramisr195602.XXX.com" failed (2: No such file or directory), client: 10.209.47.31, server: , request: "GET /production/certificate_request/blramisr195602.XXX.com? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" Passenger does not show any application groups either [root@bangvmpllDA02 nginx]# passenger-status ----------- General information ----------- max = 15 count = 0 active = 0 inactive = 0 Waiting on global queue: 0 ----------- Application groups ----------- [root@bangvmpllDA02 nginx]# here's my nginx configuration [root@bangvmpllDA02 logs]# cat ../nginx.conf user puppet; worker_processes 4; #error_log logs/error.log; #error_log logs/error.log notice; error_log logs/error.log info; #pid logs/nginx.pid; events { use epoll; worker_connections 1024; } http { include mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log logs/access.log main; sendfile on; #tcp_nopush on; server_tokens off; #keepalive_timeout 0; keepalive_timeout 120; gzip on; gzip_http_version 1.1; gzip_disable "msie6"; gzip_vary on; gzip_min_length 1100; gzip_buffers 64 8k; gzip_comp_level 3; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml; server { listen 80; server_name bangvmpllda02.XXXX.com; charset utf-8; #access_log logs/http.access.log main; location / { root html; index index.html index.htm index.php; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { root html; fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param SCRIPT_NAME $fastcgi_script_name; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # location ~ /\.ht { access_log off; log_not_found off; deny all; } location ~* \.(jpg|jpeg|gif|png|css|js|ico|xml)$ { access_log off; log_not_found off; expires 2d; } } # Passenger needed for puppet passenger_root /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18; passenger_ruby /usr/bin/ruby; passenger_max_pool_size 15; server { ssl on; listen 8140 default ssl; server_name bangvmpllda02.XXXX.com; passenger_enabled on; passenger_set_cgi_param HTTP_X_CLIENT_DN $ssl_client_s_dn; passenger_set_cgi_param HTTP_X_CLIENT_VERIFY $ssl_client_verify; passenger_min_instances 5; access_log logs/puppet_access.log; error_log logs/puppet_error.log; root /etc/puppet/rack/public; ssl_certificate /var/lib/puppet/ssl/certs/bangvmpllda02.XXX.com.pem; ssl_certificate_key /var/lib/puppet/ssl/private_keys/bangvmpllda02.XXX.com.pem; ssl_crl /var/lib/puppet/ssl/ca/ca_crl.pem; ssl_client_certificate /var/lib/puppet/ssl/certs/ca.pem; ssl_ciphers SSLv2:-LOW:-EXPORT:RC4+RSA; ssl_prefer_server_ciphers on; ssl_verify_client optional; ssl_verify_depth 1; ssl_session_cache shared:SSL:128m; ssl_session_timeout 5m; } } and the puppet.conf [main] # The Puppet log directory. # The default value is '$vardir/log'. logdir = /var/log/puppet # Where Puppet PID files are kept. # The default value is '$vardir/run'. rundir = /var/run/puppet dns_alt_names = devops.XXXX.com,devops confdir = /etc/puppet vardir = /var/lib/puppet storeconfigs = true storeconfigs_backend = puppetdb thin_storeconfigs = false async_storeconfigs = false ssl_client_header = SSL_CLIENT_S_D ssl_client_verify_header = SSL_CLIENT_VERIFY # Where SSL certificates are kept. # The default value is '$confdir/ssl'. ssldir = $vardir/ssl any ideas where am I going wrong? I checkthe directory permissions; /usr/share/puppet, /etc/puppet and /var/lib/puppet (and files inside them) are owned by puppet user. Solved The simple solution to my complicated problem was that I had placed the config.ru in wrong place moved it to /etc/puppet/rack , it was in /etc/puppet/rack/public Well!!! :-/

  Read the article

• Server error 500: Undefinable problem with my Zend Framework based site

  - by sanders

  Lately I had to reinstall my development site on my ubuntu machine since my system crashed after an os update. 4 days later my site is still not running as it should. Whenever i do an action which has in it an action on a database, it stops working. For example when Registring a new user, i get the following error: [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/user/register [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/css/main.css My Bootstrap class looks like this: <?php class Bootstrap extends Zend_Application_Bootstrap_Bootstrap{ /** * * @var unknown_type */ public $frontcontroller; /** * * @var unknown_type */ protected $_logger; /** * * @var unknown_type */ protected $_acl; /** * * @var unknown_type */ protected $_auth; /** * Setup the logging */ protected function _initLogging() { $this->bootstrap('frontController'); $logger = new Zend_Log(); $writer = 'production' == $this->getEnvironment() ? new Zend_Log_Writer_Stream(APPLICATION_PATH . '/../data/logs/app.log') : new Zend_Log_Writer_Firebug(); $logger->addWriter($writer); if ('production' == $this->getEnvironment()) { $filter = new Zend_Log_Filter_Priority(Zend_Log::CRIT); $logger->addFilter($filter); } $this->_logger = $logger; Zend_Registry::set('log', $logger); } protected function _initDefaultModuleAutoloader(){ $this->_logger->info('Bootstrap '. __METHOD__); $this->_resourceLoader = new Zend_Application_Module_Autoloader(array( 'namespace' => 'EventManager', 'basePath' => APPLICATION_PATH . '/modules/eventManager', )); $this->_resourceLoader->addResourceTypes(array( 'modelResource' => array( 'path' => 'models/resources', 'namespace' => 'Resource', ), 'service' => array( 'path' => 'services', 'namespace' => 'Service' ), )); } // @todo develop this function protected function _initDbProfiler(){ $this->_logger->info('Bootstrap ' . __METHOD__); if ('production' !== $this->getEnvironment()) { $this->bootstrap('db'); $profiler = new Zend_Db_Profiler_Firebug('All DB Queries'); $profiler->setEnabled(true); $this->getPluginResource('db')->getDbAdapter()->setProfiler($profiler); } } /** * Add Controller Action Helpers */ protected function _initActionHelpers() { $this->_logger->info('Bootstrap ' . __METHOD__); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Acl()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_RedirectCommon()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Service()); } /** * * @return unknown_type */ protected function _initRoutes(){ $this->_logger->info('Initialize Routes '. __METHOD__); $this->bootstrap('frontController'); $router = $this->frontController->getRouter(); $route = new Zend_Controller_Router_route( 'register', array( 'controller' => 'user', 'action' => 'register' ) ); $router->addRoute('register',$route); $route = new Zend_Controller_Router_route( 'login', array( 'controller' => 'user', 'action' => 'login' ) ); $router->addRoute('login',$route); $route = new Zend_Controller_Router_route( 'logout', array( 'controller' => 'user', 'action' => 'logout' ) ); $router->addRoute('logout',$route); } /** * * @return void */ protected function _initLocale(){ $this->_logger->info('Bootstrap '.__METHOD__); $locale = new Zend_Locale('nl_NL'); Zend_Registry::set('Zend_Locale', $locale); } protected function _initAcl(){ $this->_acl = new EventManager_Service_Acl(); } /** * * @return void */ protected function _initViewSettings(){ $this->_logger->info('Bootstrap '.__METHOD__); $this->bootstrap('view'); $this->bootstrap('Acl'); $this->_view = $this->getResource('view'); //set encoding and doctype $this->_view->setEncoding('UTF-8'); $this->_view->doctype('XHTML1_STRICT'); $this->_view->headMeta()->appendHttpEquiv('Content-Type', 'text/html; charset=UTF-8'); $this->_view->headMeta()->appendHttpEquiv('Content-Language', 'en-US'); //@todo op een later moment moeten hier nog de stylesheets worden toegevoegd $this->_view->headLink()->appendStylesheet('/css/main.css'); //$this->_view->headTitle('Event Manager'); /* Set the head style. $this->_view->headTitle->headStyle(); */ $this->_view->headTitle()->setSeparator(' - '); $this->_auth = Zend_Auth::getInstance(); $navigation = new Zend_Config_Xml(APPLICATION_PATH.'/configs/navigation.xml','nav'); $navContainer = new Zend_Navigation($navigation); $this->_view->navigation($navContainer)->setAcl($this->_acl)->setRole($this->_auth->getStorage()->read()->usr_role); //THIS IS LINE 169!!!!!!!!! } /** * Add graceful error handling to the dispatch, this will handle * errors during Front Controller dispatch. */ public function run() { $errorHandling = $this->getOption('errorhandling'); try { parent::run(); } catch(Exception $e) { if (true == (bool) $errorHandling['graceful']) { $this->__handleErrors($e, $errorHandling['email']); } else { throw $e; } } } /** * Handle errors gracefully, this will work as long as the views, * and the Zend classes are available * * @param Exception $e * @param string $email */ protected function __handleErrors(Exception $e, $email) { header('HTTP/1.1 500 Internal Server Error'); $view = new Zend_View(); $view->addScriptPath(dirname(__FILE__) . '/../views/scripts'); echo $view->render('fatalError.phtml'); if ('' != $email) { $mail = new Zend_Mail(); $mail->setSubject('Fatal error in application Storefront'); $mail->addTo($email); $mail->setBodyText( $e->getFile() . "\n" . $e->getMessage() . "\n" . $e->getTraceAsString() . "\n" ); @$mail->send(); } } } I have tried to debug my code, but everyting goes well until I do somethign with the db. But I don't know what goes wrong with the db. I don't get any clear error messages. Can someone help me? Some more possible interesting data: [bootstrap] resources.db.adapter = "PDO_MYSQL" resources.db.isdefaulttableadapter = true resources.db.params.dbname = "ladosa" resources.db.params.username = "root" resources.db.params.password = "root" resources.db.params.hostname = "localhost" resources.db.params.charset = "UTF8" resources.db.params.profiler.enabled = true resources.db.params.profiler.class = Zend_Db_Profiler_Firebug Autoloadernamespaces[] = "Zend_" Autoloadernamespaces[] = "SF_" phpsettings.display_errors = 0 phpsettings.error_reporting = 8191 phpSettings.date.timezone = "Europe/Amsterdam" bootstrap.path = APPLICATION_PATH"/bootstrap/Bootstrap.php" pluginPaths.resource_ = APPLICATION_PATH"/resources" resources.frontcontroller.moduledirectory = APPLICATION_PATH"/modules" resources.frontcontroller.defaultmodule = "eventManager" resources.frontcontroller.params.prefixDefaultModule = true resources.frontcontroller.exceptions = false resources.view[] = "" resources.layout.layoutPath = APPLICATION_PATH "/layouts/scripts" resources.view.encoding = "UTF-8" resources.view.title = Rode kruis Vrijwilligers applicatie ;resources.view.helperPath.Default_View_Helper = APPLICATION_PATH "/modules/eventManager/views/helpers" resources.layout.layout = "main" [production:bootstrap] [development:bootstrap] ;resources.frontController.throwExceptions = 1 ;phpSettings.display_startup_errors=1 ;phpSettings.display_errors = 1 ;resources.frontcontroller.throwerrors = [test:production] btw. I CAN login to my database command line with the given username and password. Update: today i decided to investigate on my http request and i came to an error 500. My apache logs don't give any related information, I think. I posted the logs above. Any idea's?

  Read the article

< Previous Page | 984 985 986 987 988 989 990 991 992 993 994 995  | Next Page >