Search Results

Search found 26947 results on 1078 pages for 'util linux'.

Page 996/1078 | < Previous Page | 992 993 994 995 996 997 998 999 1000 1001 1002 1003  | Next Page >

  • Symbolic link not allowed or link target not accessible

    - by TK Kocheran
    I can't seem to get a symlink working in my Apache VirtualHost, no matter what I try and I see the following error in the error log: Symbolic link not allowed or link target not accessible: /var/www/carddesigner I can browse the actual symlink from Linux with no problems whatsoever: $ ls -l /var/www | grep "carddesigner" lrwxrwxrwx 1 rfkrocktk rfkrocktk 64 2011-02-28 16:52 carddesigner -> /home/rfkrocktk/Documents/Projects/Work/carddesigner/build/main/ Additionally, I've made sure that the my VirtualHost allows the FollowSymLinks option: /etc/apache2/sites-enabled/000-localhost: <VirtualHost 127.0.0.1:80> ServerAdmin ########## DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Deny from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel debug CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> RewriteEngine On RewriteLog "/var/log/apache2/mod_rewrite.log" RewriteLogLevel 9 </VirtualHost> I can't seem to find any other configuration files that seem to override this and/or prevent symlinks from being loaded. Any ideas? Here are my permissions on the actual referenced files: $ ls -l ~/Documents/Projects/Work/carddesigner/build/main total 12 drwxrwxrwx 5 rfkrocktk rfkrocktk 4096 2011-02-28 16:11 advanced drwxrwxrwx 2 rfkrocktk rfkrocktk 4096 2011-02-28 16:10 core drwxrwxrwx 2 rfkrocktk rfkrocktk 4096 2011-02-28 16:10 simple Seems like the permissions are good to go, right?

    Read the article

  • Easy line break removal from text fields and/or selections

    - by AmV
    I'm looking for a tool that allows me to easily re-wrap text (i.e. remove line breaks, but not paragraph breaks from a text selection or the current text field that is being edited), and that works at least with text fields in my browser (Chrome) and on Windows. Bonus points for anything that works outside the browser, and that works in-place (i.e. that doesn't require copy-pasting the text through a separate window or using something like http://www.textfixer.com/tools/remove-line-breaks.php) Browser extensions, GreaseMonkey scripts or applications that also work on Linux and/or Mac (or even better, that are multi-platform) are all welcomed. Here is an example of how the tool should behave. If I have the following in a text field: This is a test for SuperUser.com. This is a test for SuperUser.com. This is a test for SuperUser.com. This is a test for SuperUser.com This is a test for SuperUser.com. This is a test for SuperUser.com. This is a test for SuperUser.com. This is a test for SuperUser.com I'd like to have an easy tool that allows me to, for example, select the text, and with a keyboard shortcut convert it to: This is a test for SuperUser.com. This is a test for SuperUser.com. This a test for SuperUser.com. This is a test for SuperUser.com This is a test for SuperUser.com. This is a test for SuperUser.com. This a test for SuperUser.com. This is a test for SuperUser.com Thanks in advance!

    Read the article

  • Mail server: can't connect via POP/IMAP

    - by MelkerOVan
    I've followed this guide on setting up a mail server on my dedicated server. I've been able to send mails from the php application I'm using and the linux commandline (using telnet, php, etc). The problem is that I cannot connect to the server via IMAP/POP which I've setup using Courier. I've tried using thunderbird but it complains that the username or password is wrong. I doubt it is the username/password but I don't know how to trouble shoot this. Edit: Here's the messages in mail.log: Jan 9 22:43:38 mail authdaemond: received auth request, service=imap, authtype=login Jan 9 22:43:38 mail authdaemond: authmysql: trying this module Jan 9 22:43:38 mail authdaemond: SQL query: SELECT id, crypt, "", uid, gid, home, "", "", name, "" FROM users WHERE id = '[email protected]' AND (enabled=1) Jan 9 22:43:38 mail authdaemond: password matches successfully Jan 9 22:43:38 mail authdaemond: authmysql: sysusername=<null>, sysuserid=5000, sysgroupid=5000, homedir=/var/spool/mail/virtual, [email protected], fullname=peter, maildir=<null>, quota=<null>, options=<null> Jan 9 22:43:38 mail authdaemond: authmysql: clearpasswd=<null>, passwd=password Jan 9 22:43:38 mail authdaemond: Authenticated: sysusername=<null>, sysuserid=5000, sysgroupid=5000, homedir=/var/spool/mail/virtual, [email protected], fullname=peter, maildir=<null>, quota=<null>, options=<null> Jan 9 22:43:38 mail authdaemond: Authenticated: clearpasswd=peter, passwd=password Jan 9 22:43:38 mail imapd: chdir Maildir: No such file or directory

    Read the article

  • How to verify a self-signed certificate from another server using openssl?

    - by ntsue
    I am new to openssl and I am having some trouble verifying (from a client machine) an ftp server using ssl with a self-signed certificate. I generated the .cer file by going to my server in IIS and exporting the certificate without the private key. I believe that this is all that I should need on the client side, right? I use the following code to verify the certificate openssl verify ftp.cer and the error that I get back is error 20 at 0 depth lookup:unable to get local issuer certificate I tried this as well: openssl verify -CAfile ftp.cer ftp.cer but received the same error. From what I understand about SSL, this is happening because I have no chain of trust that connects to this server. By default, openssl did not install any trusted CAs and this is fine. I would just like to tell it to trust this server. I tried various tutorials telling me how to add a certificate authority, including this one here, however the instructions are for linux and include adding a symlink and I am trying to do this in windows. If anyone could provide any guidance on how to do this, or enlighten me if I am not understanding something correctly, I would greatly appreciate it. Thanks!

    Read the article

  • Acer Aspire one is falling apart on Ubuntu

    - by Narcolapser
    Question: How do I have my netbook detect and install hardware? Info: I have an Acer Aspire One, it came with windows XP and I loaded it with Win7. I decided I wanted to change to Ubuntu so I tried Ubuntu netbook remix, which failed horribly, and so after attempting 3 or so other OS's I ended with Ubuntu Desktop 9.10. Which worked fine for a while, but there were some minor issues so I asked a question about it here and decided to change my OS again. This last weekend I tried mandriva like that guy in my other question suggested, no success. when I had though my netbook lost the ability to use it's touch pad, I didn't think much of it, just thought it must be a driver or something. But When Mandriva failed, and I also while I was at it tried Damn small linux and Debian, which both failed to, I decided to switch back to Ubuntu Desktop(some where in here my keyboard stopped working for one attempt to). But first I gave the netbook remix one more try. it worked this time, with the exception of it didn't have any networking. I thought it was a driver issue again and finished the weekend with ubuntu desktop 9.10 again. But now things get really crazy. it doesn't know it has a wireless card or an ethernet card. It doesn't know my phone is connected trying to provide wireless broadband either. I'm clueless on what could be the problem. And with only a minimal amount of experience with Ubuntu can't navigate the entire interface with only my keyboard(it doesn't detect a USB mouse when I plug it in, it had when I installed it. in fact the network interfaces were working just fine when I live boot ubuntu to installed it). Even so, I don't know where to go or what to do to make it recognize it's hardware. I'm in a dire situation, any help is welcome.

    Read the article

  • How to troubleshoot connectivity when curl gets an *empty response*

    - by chad
    I want to know how to proceed in troubleshooting why a curl request to a webserver doesn't work. I'm not looking for help that would be dependent upon my environment, I just want to know how to collect information about exactly what part of the communication is failing, port numbers, etc. chad-integration:~ # curl -v 111.222.159.30 * About to connect() to 111.222.159.30 port 80 (#0) * Trying 111.222.159.30... connected * Connected to 111.222.159.30 (111.222.159.30) port 80 (#0) > GET / HTTP/1.1 > User-Agent: curl/7.19.0 (x86_64-suse-linux-gnu) libcurl/7.19.0 OpenSSL/0.9.8h zlib/1.2.3 libidn/1.10 > Host: 111.222.159.30 > Accept: */* > * Empty reply from server * Connection #0 to host 111.222.159.30 left intact curl: (52) Empty reply from server * Closing connection #0 So, I understand that an empty response means that curl didn't get any response from the server. No problem, that's precisely what I'm trying to figure out. But what more specific info can I derive from cURL here? It was able to successfully "connect", so doesn't that involve some bidirectional communication? If so, then why does the response not come also? Note, I've verified my service is up and returning responses. Note, I'm a bit green at this level of networking, so feel free to provide some general orientation material.

    Read the article

  • PHP output buffer settings ignored by server

    - by Ecom Evolution
    I have been trying to flush the output of certain scripts to the browser on demand, but they do not work on our production server. For instance, I tried running the "Phoca Changing Collation tool" (find it on Google) and I don't see any output until the script finishes executing. I've tried immediately flushing the buffer on other scripts that work fine on any server but this one using the following code: echo "something"; ob_flush(); flush(); Setting "ob_implicit_flush(1);" doesn't help either. The server is Apache 2.2.21 with PHP 5.2.17 running on Linux. You can see our php.ini file here if that will help: http://www.smallfiles.org/download/1123/php.ini.html This isn't the only problem we are having with the server ignoring in-script directives. The server also ignores timeout coding such as: ini_set('max_execution_time', 900*60); AND set_time_limit(86400); Script always times out at the php.ini default. Doesn't seem to matter if script is executed in IE or Firefox. Tried "ini_set('zlib.output_compression_level', 'Off');" and checked that it is "Off" in the php.ini file. The code "apache_setenv('no-gzip', 1);" causes a fatal error so tried uploading a .htaccess file with the "mod_gzip_on No" directive. Neither helps. Tried running Apache as fcgi and suphp, but same results. Server is NOT in safe mode. Pullin ma hair out!

    Read the article

  • apache permission errors

    - by Wilduck
    I'm trying to set up Apache on a arch-linux box as a testing environment (I'm only using the localhost, not trying to serve anything to the greater web). When setting up Django with mod_wsgi, it recommended that I set up a WSGIScriptAlias from / to /usr/local/django/mysite/apache/django.wsgi . I've done this, as well as added the /usr/.../apache directory to my httpd.conf. When I try to access http://localhost I get a 403 forbidden error. I have no idea why this is happening. Things I've tried so far: 1) chown -R http .../apache 2) chmod -R 777 .../apache 3) using a simple Alias directive to host a static file from that directory. None of these have worked. I'm at a loss for what I'm doing wrong. Below is a relevant excerpt from my httpd.conf: Alias / /usr/local/django/mysite/apache <Directory "/usr/local/django/mysite/apache"> Order deny,allow Allow from all </Directory> So my question is: what am I doing wrong?

    Read the article

  • How to configure DNS server to forward queries about particular domain AND all of its subdomains

    - by user71061
    I have DNS server (linux box with bind9), which is authorative for some domains, and forward all other queries to external DNS server of my ISP provider. So far no problem. Now I want that queries about some specific domains were forwarded to my internal DNS server, f.e.: zone "some_domain" { type forward; forwarders { some_internal_dns_ip; }; }; So far still no problem, all works ok. But then, I want also to forward some reverse DNS queries to my internal DNS. So, I have added: zone "16.172.in-addr.arpa" { type forward; forwarders { some_internal_dns_ip; }; }; And this doesn't work as I expect. Queries about "16.172.in-addr.arpa" (for example 1.16.172.in-addr.arpa) are resolved correctly, but reverse queries about full address (for example 1.1.16.172.in-addr.arpa) are not. I understand that my server should use here some recursive query, but could not configure it. I have already tried adding following options recursion yes; allow-recursion { 127.0.0.1; }; allow-recursion-on { 127.0.0.1; }; but with no success . (I have used loopback address here, because I need this functionality only for my DNS host, and not for its clients) Any suggestions?

    Read the article

  • Security in shared hosting vs VPS 'virtual appliances'

    - by Pedro Loureiro
    I have to change my hosting provider. Right now I have a shared hosting account but I'm considering trying the LAMP stack appliance from turnkeylinux.org. I'm very comfortable with using linux, I've been using it for a long time. I have no problem ssh'ing into remote machines and do whatever I have to do (coding, reading logs, moving files, deploying, etc). The problem is that none of those tasks have involved securing the server/firewall. My experience has been as a desktop user or developer deploying apps/files in remote servers. Ignoring the security in the application logic (read: any scripts, frameworks, websites I might have created or installed) - I'm worried about things like base configuration of deamons, firewall, ports, executable scripts being readable from the outside and whatnot. My question is: how do you compare the (expected) out of the box security of the LAMP stack from turnkey and the (expected) security of a "regular" shared hosting provider? I was hoping to find some guides with a list of steps to do to protect my server but the only documentation I found was simply referring to ubuntu's documentation.

    Read the article

  • Mac OS X Client With Static DHCP Assignment Requests Wrong IP via Option 50

    - by Starchy
    I have a number of Mac (and a few Linux) laptops getting DHCP from a Force10 layer 3 switch, the only DHCP server on the subnet. There's a global dynamic pool, and for each full-time employee's laptop I have a single IP static pool set by MAC address. One and only one of the clients, running OS X 10.7.5, consistently fails to get a static assignment. The MAC address in the static pool definition has been carefully re-checked. Running tcpdump on a mirrored port when the laptop connects, I see that it is specifically requesting 10.100.0.252 (a dynamic address): 11:32:10.108280 IP (tos 0x0, ttl 255, id 28293, offset 0, flags [none], proto UDP (17), length 328) 0.0.0.0.bootpc > broadcasthost.bootps: [udp sum ok] BOOTP/DHCP, Request from 3c:07:54:xx:xx:xx (oui Unknown), length 300, xid 0x1399da89, Flags [none] (0x0000) Client-Ethernet-Address 3c:07:54:xx:xx:xx (oui Unknown) Vendor-rfc1048 Extensions Magic Cookie 0x63825363 DHCP-Message Option 53, length 1: Request Parameter-Request Option 55, length 9: Subnet-Mask, Default-Gateway, Domain-Name-Server, Domain-Name Option 119, LDAP, Option 252, Netbios-Name-Server Netbios-Node MSZ Option 57, length 2: 1500 Client-ID Option 61, length 7: ether 3c:07:54:xx:xx:xx Requested-IP Option 50, length 4: 10.100.0.252 Lease-Time Option 51, length 4: 7776000 Hostname Option 12, length 10: "host-name" END Option 255, length 0 PAD Option 0, length 0, occurs 8 I haven't been able to find any extra system prefs or unusual software on the laptop. Disabling the interface and rebooting or temporarily setting the IP manually both fail to make any difference. Any suggestions appreciated.

    Read the article

  • Apache2, Tomcat6, and proxy redirects

    - by Randal Hale
    So here is my question - go easy and slow. I'm a GIS Consultant and general hack with linux. I inherited this volunteer job essentially because I knew more than the rest of the team - or the rest of the team isn't as stubborn as I am... With that said a number of people have been mucking around in the server before I got involved so I've been cleaning up a lot of things. The domain names have been changed to protect the innocent. I have a server running Apache2 (port 80) and tomcat6 (8080) running on ubuntu server 10.4. There is a virtual host on Apache2 called "Runner" (the domain is runner.org). I have mod_proxy loaded. I am trying to redirect everyone that visits runner.org to http://some.ip.address:8080/openrunner-webapp/ So far I've gotten runner.org assigned to the apache2 server. Someone set up a redirect in the httpd.conf file but I believe it needs to go into the virtualhost. I tried setting the redirect in the virtualhost as: *ProxyPass / http://localhost:8080/openrunner-webapp All that does is show me the root of the Apache webserver. Anyway I'm stuck

    Read the article

  • How can a Postfix/Dovecot(ssl)/Apache/Roundcube(non-ssl) setup leak email addresses?

    - by Jens Björnhager
    I have a linux box email server with Postfix as the MTA, Dovecot as the IMAP server and Apache with Roundcube as webmail. In my /etc/postfix/aliases I have just above a hundred different aliases which makes as many email addresses on my domain. I use one address per website so I easily can shut down spam infested addresses. During the half a year or so that I have had this setup, I have received 3 spam from 2 sources. As I know exactly where I entered this address, it should be easy to pinpoint email leaking websites and services. However, these sources are, according to me, not likely email sellers. And for one of them to sell my email twice? I contacted one of the sources and they are adamant that their system is tight. They suggested the possibility that it is my server that is doing the leaking. So, my question is: How likely is it that my box is leaking email addresses, and how? I don't store fully qualified email addresses anywhere in my system except in my maildir. I use SSL connection to IMAP I do not use https on webmail

    Read the article

  • Why can't I connect to computers on my network using our external IP address?

    - by Kivin
    My home network is serviced by an ADSL line. The modem is in bridged mode. The router performs the PPPoE. Three computers are connected to the router: two wired Windows 7 boxes and a Ubuntu Linux box over wifi. The computers are hosting various forms of services including FTP and HTTP. The router has port forwarding mapped from the relevant ports to the reserved IP addresses for the computers. If I attempt to connect to a server inside the network, such as ftp://67.xx.xxx.xxx from inside the network, the request times out. However if I connect using the internally mapped address, such as ftp://192.168.0.100, all is well. This is a nuisance for setting up software, especially on the laptop which needs to be able to phone home from anywhere, and I just don't have enough expertise with networking to know why this is occurring to even have a clue whether it can be solved or not. edit: It should be noted that the servers can be accessible outside the network - say, at the starbucks across the street - perfectly fine, using the ISP provided address and the appropriate port.

    Read the article

  • Troubleshooting iptables and configuring it to drop the priority of long-term connections

    - by intuited
    I'm somewhat familiar with the general concepts of iptables, and would like to learn it in more detail. I'm hoping that my learning experience can also be useful. The situation: I'm running dd-wrt on my router. Despite its purported QoS skills, I'm still seeing connection latency shoot up hugely whenever there's an ongoing http connection, eg some large download. Under such conditions, it can take 10 seconds or more to load a basic webpage; sometimes the connections are dropped entirely. I've tried adjusting the parameters, dropping the allotted bandwidth for up and download to well under my limit, but nothing seems to work. dd-wrt is configured to use HTB as the QoS algorithm; HFSC, although presented as an option, seems to cause the router to crash, and is rumoured to not actually work on any linux system. I'd like to be able to troubleshoot this issue and hopefully improve the settings that dd-wrt is using, but I'm finding the learning curve a bit overwhelming. For starters I am not sure what HTB actually specifies: is this a set of iptables commands, or do some of those commands specify how HTB is to be used? I would like it to prioritize based on protocol the way that it already supposed to, and in addition I'd like to have it drop the priority of connections which have a high total byte count, say over 400KB. Also tips on utilities that can be run under dd-wrt to get more info on what's going on in there are appreciated. I've tried to get iftop to work but there were issues running curses. I'm leaning towards replacing dd-wrt with openwrt; comments on this strategy are also welcome. I suspect that I would be well advised to get a second router as a standin before trying that. It may be worth noting that my total bandwidth is pretty limited (256Kbit/s).

    Read the article

  • RAID 5 Install on Ubuntu Server 12.04 [closed]

    - by tarabyte
    Environment: Ubuntu Server 12.04, installing from bootable flash drive Error: No root file system is defined. Please correct this from the partitioning menu. I'm trying to set up a personal file server with software RAID 5. I just got three hard drives for this, but haven't found any solid documentation. I'm unsure what the basic way to partition my hard drives is. Can someone upload a screenshot of their "partition disks" screen so that I can compare with mine (attached)? Should I set the bootable flag? Do I need a /home partition? A /boot partition? Should I "Use [my partition] as: Ext4 journaling file system"? Or make that field "physical volume for RAID"? I am an engineer, but I have only a cursory knowledge of all-things-linux. If you know of any good learning resources I'd be happy to hear about those too (that way I don't have to blindly follow deprecated tutorials online). well, image would be here but i don't have a high enough reputation yet (please vote up :)) Thank you, References I've looked into: https://help.ubuntu.com/community/Installation/SoftwareRAID https://help.ubuntu.com/12.04/serverguide/advanced-installation.html http://forevergeeks.com/setup-ubuntu-server-with-raid-5/

    Read the article

  • Need to find jni.h in cmake on Mac

    - by Ilan Tal
    I am trying to make VTK compile on a Mac Air machine. I am using CMake 2.8-9, using Xcode4 as the generator. If I press the Configure button with VTK_WRAP_JAVA not checked, it will go with no errors. However I definitely need to use the wrap java since my main program is in Java and I need to get to VTK which is c++. As soon as I check the wrap Java, I get Could NOT find JNI. It apparently is looking for jni.h which in Linux there is no problem finding, but in the Mac it apparently can't find it. I did a locate jni.h and got new-host-2:~ geraldkolodny$ locate jni.h /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.7.sdk/System/Library/Frameworks/JavaVM.framework/Versions/A/Headers/jni.h /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.8.sdk/System/Library/Frameworks/JavaVM.framework/Versions/A/Headers/jni.h /Library/Java/JavaVirtualMachines/jdk1.7.0_07.jdk/Contents/Home/include/jni.h I tried to manually put into JAVA_INCLUDE_PATH2 either entry 2 or 3 (without the jni.h at the end), but it still can't find jni.h. Xcode used to have a template for jni but that is now gone in the latest version. I am fresh out of ideas on how to solve this problem. I'd be grateful for any suggestions. Thanks, Ilan

    Read the article

  • Kerberos & localhost

    - by Alex Leach
    I've got a Kerberos v5 server set up on a Linux machine, and it's working very well when connecting to other hosts (using samba, ldap or ssh), for which there are principals in my kerberos database. Can I use kerberos to authenticate against localhost though? And if I can, are there reasons why I shouldn't? I haven't made a kerberos principal for localhost. I don't think I should; instead I think the principal should resolve to the machine's full hostname. Is that possible? I'd ideally like a way to configure this on just one server (whether kerberos, DNS, or ssh), but if each machine needs some custom configuration, that'd work too. e.g $ ssh -v localhost ... debug1: Unspecified GSS failure. Minor code may provide more information Server host/[email protected] not found in Kerberos database ... EDIT: So I had a bad /etc/hosts file. If I remember correctly, the original version I got with Ubuntu had two 127.0. IP addresses, something like:- 127.0.0.1 localhost 127.0.*1*.1 hostname For no good reason, I'd changed mine a long time ago to: 127.0.0.1 localhost 127.0.*0*.1 hostname.example.com hostname This seemed to work fine with everything until I tried out ssh with kerberos (a recent endeavour). Somehow this configuration led to sshd resolving the machine's kerberos principal to "host/localhost@\n", which I suppose makes sense if it uses /etc/hosts for forward and reverse dns lookups in preference to external dns. So I commented out the latter line, and sshd magically started authenticating with gssapi-with-mic. Awesome. (Then I investigated localhost and asked the question)

    Read the article

  • Subversion all or nothing access to repo tree

    - by Glader
    I'm having some problems setting up access to my Subversion repositories on a Linux server. The problem is that I can only seem to get an all-or-nothing structure going. Either everyone gets read access to everything or noone gets read or write access to anything. The setup: SVN repos are located in /www/svn/repoA,repoB,repoC... Repositories are served by Apache, with Locations defined in etc/httpd/conf.d/subversion.conf as: <Location /svn/repoA> DAV svn SVNPath /var/www/svn/repoA AuthType Basic AuthName "svn repo" AuthUserFile /var/www/svn/svn-auth.conf AuthzSVNAccessFile /var/www/svn/svn-access.conf Require valid-user </Location> <Location /svn/repoB> DAV svn SVNPath /var/www/svn/repoB AuthType Basic AuthName "svn repo" AuthUserFile /var/www/svn/svn-auth.conf AuthzSVNAccessFile /var/www/svn/svn-access.conf Require valid-user </Location> ... svn-access.conf is set up as: [/] * = [/repoA] * = userA = rw [/repoB] * = userB = rw But checking out URL/svn/repoA as userA results in Access Forbidded. Changing it to [/] * = userA = r [/repoA] * = userA = rw [/repoB] * = userB = rw gives userA read access to ALL repositories (including repoB) but only read access to repoA! so in order for userA to get read-write access to repoB i need to add [/] userA = rw which is mental. I also tried changing Require valid-user to Require user userA for repoA in subversion.conf, but that only gave me read access to it. I need a way to default deny everyone access to every repository, giving read/write access only when explicitly defined. Can anyone tell me what I'm doing wrong here? I have spent a couple of hours testing and googling but come up empty, so now I'm doing the post of shame.

    Read the article

  • How do I install a different OS on a Compaq Presario cq56 with preinstalled SuSE 11?

    - by McCoy
    Thing is, I don't have a clue of Linux systems, I usually use WinXP. Bought a notebook with SuSE 11 on it, because I have my XP licence and thought I could install that if I found the chipset drivers for the hardware (which I'm not completely sure I have the right versions of). Then I thought I'd give it a shot with the SuSE, looked nice enough. But I can't get my external hd to work (tried force mount) and the banshee doesn't do anything like playing video. Since that is one of the two main purposes of this notebook, I need to get that to work. Tried downloading VLC player, but that only works with SuSE 11.1 upwards. So I downloaded a SuSE 11.3 and burned the iso. But surprise, no way the notebook would boot from cd. Same with the XP cd (considered setting up a dual boot). And no, I can't get to BIOS to reset to default, either. So I can basically do nothing else than going online with this thing and that's not enough for me (gamer in withdrawal, yikes!). I need at least to get to my firefox profile on the external hd and be able to watch video. Can somebody please help me? I think at this point I'd prefer to install XP and MAYBE the SuSE 11.3 after that. I'm not a native speaker, so please speak plainly, thanks. :) Edit: if this is impossible, could someone please help me with the external hd mount and video playback? Edit: Found out how to boot from cd by now. But still no XP, because I get bluescreen after bluescreen while setup is loading files. I guess it's the missing SATA drivers...

    Read the article

  • PHP/MySQL Performance Testing with Just PHP

    - by Mike Gifford
    I'm trying to diagnose a server where the website is loading very slowly, but unfortunately my client has only provided me with FTP access. I've got FTP access so I can upload PHP scripts, but can't set up any other server side tools. I have access to phpMyAdmin, but not direct access to the MySQL server. It is also unfortunately a Windows server (and we've been a Linux shop for over a decade now). So, if I wan to evaluate MySQL & disk speed performance through PHP on a generic server, what is the best way to do this? There are already tools like: https://github.com/raphaelm/php-benchmark or https://github.com/InfinitySoft/php-benchmark But I'm surprised there isn't something that someone has already set up & configured to just run through and do some basic testing of a server's responsiveness. Every time we evaluate a new server environment it's handy to be able to compare it to an existing one quickly to see if there are any anomalies. I guess I'd just hoped that someone else had written up a script to do this already. I know I have, but that was before Github when there was a handy place to post scraps of code like this. Originally posted in http://stackoverflow.com/questions/12321498/php-mysql-performance-testing-with-just-php but it was recommended that I re-post it here.

    Read the article

  • Intel Atom overheating in ASUS EEE Box 1501P

    - by Sergey L.
    I have had an ASUS EEE Box 1501P for just a little bit over a year. Of course it breaks 2 months after the warranty runs out. http://www.asus.com/Eee/EeeBox_PC/EeeBox_PC_EB1501P/ I have been using the box as a Home Media Center. Running mostly 24/7 often pausing a video overnight. Since last week the fan started running extremely loud. After some digging I found that the Intel Atom CPU in it is overheating and the built-in sensor is reporting temperatures way over 105°C. This got me worried, so I took the unit apart. Completely vacuumed the heat sink, oiled the fan, but the unit is still showing the same behaviour. After turning it on and just observing the hardware monitor in the BIOS the temperature slowly rises from 40°C to over 95°C in appx 5 min. I am running the newest BIOS and a lightweight Linux OPENELEC OS with XBMC on it. Now I am wondering if it could be a faulty heat sensor in the Atom. Recommended running temperature is up to 85°C, but I have not detected any performance hits when running at the above mentioned 105°C and there seem to be no software faults. How can an Atom with an attached heat sink and a fan running at full capacity even get this hot in the first place at 0 load? Aren't those things designed to generate virtually no heat? Could it be a faulty heat sensor? What shall I try to fix this? I would prefer not to damage the CPU, since it is hard fused into the motherboard and cannot be replaced. I could remove the heat pipe/heat sink, but it is getting hot, so heat is properly transferring from the CPU to the heat pipe, the fan is running at full capacity, is recently oiled and warm air is making it out of the exhaust. Edit: One more note: The North-bridge (or whatever it is called nowadays) is on the same heat pipe.

    Read the article

  • How to bypass resume from hibernate [closed]

    - by Daniel Trebbien
    I am attempting to resume a Windows Vista laptop from hibernate, but the resume process seems to be stuck in an endless loop in which Windows is repeatedly trying to read from the optical drive. When I press the Power On button on the laptop, the screen is black (not even the backlight turns on) and the following occurs in a loop: Five seconds pass and I hear the optical drive being accessed. (There's no disk in the drive, so it sounds like a short buzzing noise.) Two seconds pass and I hear the optical drive being accessed. Two seconds pass and I hear the optical drive being accessed. So it's three short buzzing noises in a row, over and over again. Eventually I have to abruptly power off the machine. I have tried inserting a data CD into the drive as well as a bootable CD (a live Linux distro boot disk). For both, the optical drive spins up for a bit, but stops after Windows decides that the disk is not what it is looking for. I have since lost the Windows Vista recovery DVD, but I don't know if inserting the recovery disk into the optical drive would have a different effect than the bootable CD. I have tried pressing F8 immediately after pressing the Power On button (hoping to enter System Restore), but that did not have an effect. Is there a special key sequence that will cause Windows to bypass resuming from hibernate, effectively ignoring hiberfil.sys?

    Read the article

  • Headless VirtualBox VM NAT Network

    - by dirt
    I have a remote linux server accessible through SSH only. My goal is to host multiple Virtual Machines on this host server using VirtualBox. The host server has 1 IP address, so NAT will be used to route to the VMs for example 10022 will forward to server1:22 and 20022 will forward to server2:22. I have installed VirtualBox and copied a pre-configured CentOS VM to the host server. I start the VM, but cannot establish a connection to the server for example ssh -p 10022 127.0.0.1 times out. I've tried many things: Method 1: Copied existing .vdi, attached to new VM Method 2: Imported .Ova VM (thought it would help any MAC re-init issues?) NAT network type, tried natnet1 192.168/16 and 10.0/16 VBoxManage modifyvm "hermes.awoms.com" --natnet1 "192.168/16" Port forwarding with and without specifying VM ip in modifyvm --natpf1 command VBoxManage modifyvm "hermes" --natpf1 "guestssh,tcp,,10022,,,22" VBoxManage modifyvm "hermes" --natpf1 "guestssh,tcp,,10022,192.168.0.15,22" I can't see if VM is even booting (VBoxHeadless "hermes" --start & runs with no errors) I can't tell if VM is getting an IP address Is there anything else I can do to get more information from VirtualBox or the VM starting up when the only access I have is SSH?

    Read the article

  • Cheapest iSCSI SAN for Windows 2008/SQL Server clustering?

    - by MichaelGG
    Are there any production-quality iSCSI SANs suitable for use with Windows Server 2008/SQL Server for failover clustering? So far, I've only seen Dell's MD3000i, and HP's MSA 2000 (2012i), which both are around $6K with a minimal disk configuration. Buffalo (yea, I know), has a $1000 device with iSCSI support, but they say it will not work for 2008 failover clustering. I'm interested in seeing something suitable for failover in a production environment, but with very low IO requirements. (Clustering, say, a 30GB DB.) As for using software: On Windows, StarWind seems to have a great solution. But it's actually more money than buying a hardware SAN. (As I understand, only the enterprise edition supports having replicas, and that's $3000 a license.) I was thinking I could use Linux, something like DRBD + an iSCSI target would be fine. However, I haven't seen any free or low-cost iSCSI software that supports SCSI-3 persistent reservations, which Windows 2008 needs for failover clustering. I know $6K isn't much at all, just curious to see if there are practical cheaper solutions out there. And finally, yes, the software is expensive, but many small business get MS BizSpark, so the Windows 2008 Enterprise / SQL 2008 licenses are completely free.

    Read the article

< Previous Page | 992 993 994 995 996 997 998 999 1000 1001 1002 1003  | Next Page >