Search Results

Search found 27946 results on 1118 pages for 'output buffer empty'.

Page 999/1118 | < Previous Page | 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006  | Next Page >

• Call 32-bit or 64-bit program from bootloader

  - by user1002358

  There seems to be quite a lot of identical information on the Internet about writing the following 3 bootloaders: Infinite loop jmp $ Print a single character Print "Hello World". This is fantastic, and I've gone through these 3 variations with very little trouble. I'd like to write some 32- or 64-bit code in C and compile it, and call that code from the bootloader... basically a bootloader that, for example, sets the computer up to run some simple numerical simulation. I'll start by listing primes, for example, and then maybe some input/output from the user to maybe compute a Fourier transform. I don't know. I haven't found any information on how to do this, but I can already foresee some problems before I even begin. First of all, compiling a C program compiles it into one of several different files, depending on the target. For Windows, it's a PE file. For Linux, it's a .out file. These files are both quite different. In my instance, the target isn't Windows or Linux, it's just whatever I have written in the bootloader. Secondly, where would the actual code reside? The bootloader is exactly 512 bytes, but the program I write in C will certainly compile to something much larger. It will need to sit on my (virtual) hard disk, probably in some sort of file system (which I haven't even defined!) and I will need to load the information from this file into memory before I can even think about executing it. But from my understanding, all this is many, many orders of magnitude more complex than a 12-line "Hello World" bootloader. So my question is: How do I call a large 32- or 64-bit program (written in C/C++) from my 16-bit bootloader.

  Read the article

• Random begining index iterator for HashSet

  - by funktku

  I use HashSet for add(); remove(); clear(); iterator(); methods. So far everything worked like a charm. However, now I need to fulfill a different requirement. I'd like to be able to start iterating from a certain index. For example, I'd like the following two programs to have same output. Program 1 Iterator it=map.iterator(); for(int i=0;i<100;i++) { it.next(); } while (it.hasNext()) { doSomethingWith(it.next()); } Program 2 Iterator it=map.iterator(100); while (it.hasNext()) { doSomethingWith(it.next()); } The reason I don't want to use the Program 1 is that it creates un-neccesary overhead. From my researchs, I couldn't not find a practical way of creating an iterator with begining index. So, my question is, what would be a good way to achieve my goal while minimizing the overheads? Thank you.

  Read the article

• need to clean malformed tags using regular expression

  - by Brian

  Looking to find the appropriate regular expression for the following conditions: I need to clean certain tags within free flowing text. For example, within the text I have two important tags: <2004:04:12 and . Unfortunately some of tags have missing "<" or "" delimiter. For example, some are as follows: 1) <2004:04:12 , I need this to be <2004:04:12> 2) 2004:04:12>, I need this to be <2004:04:12> 3) <John Doe , I need this to be <John Doe> I attempted to use the following for situation 1: String regex = "<\\d{4}-\\d{2}-\\d{2}\\w*{2}[^>]"; String output = content.replaceAll(regex,"$0>"); This did find all instances of "<2004:04:12" and the result was "<2004:04:12 ". However, I need to eliminate the space prior to the ending tag. Not sure this is the best way. Any suggestions. Thanks

  Read the article

• Tracking down origin of I/O in multi-process server

  - by Craig Ringer

  I'm currently trying to track down some phantom I/O in a PostgreSQL build I'm testing. It's a multi-process server and it isn't simple to associate disk I/O back to a particular back-end and query. I thought Linux's perf tool would be ideal for this, but I'm struggling to capture block I/O performance counter metrics and associate them with user-space activity. It's easy to record block I/O requests and completions with, eg: sudo perf record -g -T -u postgres -e 'block:block_rq_*' and the user-space pid is recorded, but there's no kernel or user-space stack captured, or ability to snapshot bits of the user-space process's heap (say, query text) etc. So while you have the pid, you don't know what the process was doing at that point. Just perf script output like: postgres 7462 [002] 301125.113632: block:block_rq_issue: 8,0 W 0 () 208078848 + 1024 [postgres] If I add the -g flag to perf record it'll take snapshots of the kernel stack, but doesn't capture user-space state for perf events captured in the kernel. The user-space stack only goes up to the entry-point from userspace, like LWLockRelease, LWLockAcquire, memcpy (mmap'd IO), __GI___libc_write, etc. So. Any tips? Being able to capture a snapshot of the user-space stack in response to kernel events would be ideal.

  Read the article

• Perl, Net::Traceroute::PurePerl return value

  - by John R

  This is a sub routine that I copied from CPAN. It works fine as it is when I run it from the command line. I have a similar function from Net::Traceroute that also works fine AND allows me to return the string with a SOAP call. The problem comes when I try to return the ~string(?) from the function below with a SOAP call. sub tr { use Net::Traceroute::PurePerl; my $t = new Net::Traceroute::PurePerl( backend => 'PurePerl', # this optional host => 'www.whatever.com', debug => 0, max_ttl => 30, query_timeout => 2, packetlen => 40, protocol => 'udp', # Or icmp ); $t->traceroute; $t->pretty_print; return $t; #print $t; } The output looks like a string except the last part of the string looks like this: 28 * * * 29 * * * 30 * * * Net::Traceroute::PurePerl=HASH(0x11fa6bf0) I don't know what is different about Net::Traceroute::PurePerl that won't allow me to return the value with SOAP since the Net::Traceroute version does allow me to return it with SOAP.

  Read the article

• Need Help on JavaScript to Trim

  - by MacpaLtd

  I am facing some problems with my server space. The images are using all the space from the server, making it slow. As it is an eCommerce website, it cannot be slow or we lose customers. If I have the following: SKU's : ABC123-001 > catName > Phone ABC753-851 > catName > MAC AT1233-098 > catName > PC How can I use trim to make it the following: SKU's : 123 > catName > Phone 753 > catName > MAC 1233 > catName > PC Which I would use in the following script: <script type="text/javascript"> $(function(){ var sku = $("#ProductBreadcrumb ul li:last").text(); $(".ProductThumbImage img").attr('src','http://img.example.com/images/'+catName+'/'+sku+'.jpg'); }); </script> So, basically, the output for the picture link would be: http://img.example.com/images/phone/123.jpg http://img.example.com/images/mac/753.jpg http://img.example.com/images/pc/1233.jpg So yeah, first problem I have to face is.. How can I trim it? I am not familiar with JavaScript so any help would be really appreciated :D

  Read the article

• Anyone Experiencing Slow Builds With VS2010?

  - by MrKWatkins

  Hi, We've recently upgraded to the final release of VS2010 and are experiencing very slow build times compared to the same code under 2008. I was wondering if anyone else is experiencing the same so I can work out whether it's just our environment or not? A few details: Using VS2010 Ultimate on Windows 7 with fairly beefy machines, talking to TFS 2010. The solution has been upgraded from VS2008 but still builds against .NET 3.5 and ASP.NET MVC 1.0. It doesn't seem to be the compilation itself taking long but something else in the build process. This is because even projects that are up to date and don't need compiling are taking a few seconds or so to process. It's not due to an Visual Studio addin because a couple guys in the team haven't installed any. The first build after loading VS2010 is pretty quick, then they seem to slow down over time. For example on of the projects in my solution just took 00:00:00.08 to process after a restart. (The project was up to date and didn't need compiling) I then immediately hit rebuild and it jumps to 00:00:01.33. We're also experiencing the problem with another solution that uses .NET 4.0 that was building perfectly fine under VS2010 RC. There are no build events or anything like that I can blame, just straightforward assembly builds. The IDE is not very responsive during the slow builds. Anyone else has similar problems? Update: It looks like the resolving assembly references is taking a long time. Looking at the MSBuild diagnostic output or the example above the first build has 30ms for ResolveAssemblyReferences, the second build has 800ms. Subsequent builds seem to be taking longer copying stuff around, e.g. CopyFilesToOutputDirectory jumps from 1ms to 27ms.

  Read the article

• Multidimensional Array To Mysql Codeigniter

  - by rochellecanale

  A little help how can I create an input query using this array? Or how can I pass it in the table? my table layout sample is this: sales_table id | product_name | price | qty | subtotal This is derived from the var_dump() function. Here is my code in array //array code from unserialized function $products = unserialize($this->session->userdata('product_list')); //This is the output. Array ( [2] => Array ( [id] => 2 [product_name] => NOKIA 5110 [product_desc] => Cellphone [product_price] => 500.00 [product_qty] => 1 [product_amount] => 500 [product_code] => NOKI2012-84353 ) [3] => Array ( [id] => 3 [product_name] => HP IPAQ RW6828 [product_desc] => Cellphone [product_price] => 1500.00 [product_qty] => 1 [product_amount] => 1500 [product_code] => HP I2012-08386 ) )

  Read the article

• Getting the type of an array of T, without specifying T - Type.GetType("T[]")

  - by Merlyn Morgan-Graham

  I am trying to create a type that refers to an array of a generic type, without specifying the generic type. That is, I would like to do the equivalent of Type.GetType("T[]"). I already know how to do this with a non-array type. E.g. Type.GetType("System.Collections.Generic.IEnumerable`1") // or typeof(IEnumerable<>) Here's some sample code that reproduces the problem. using System; using System.Collections.Generic; public class Program { public static void SomeFunc<T>(IEnumerable<T> collection) { } public static void SomeArrayFunc<T>(T[] collection) { } static void Main(string[] args) { Action<Type> printType = t => Console.WriteLine(t != null ? t.ToString() : "(null)"); Action<string> printFirstParameterType = methodName => printType( typeof(Program).GetMethod(methodName).GetParameters()[0].ParameterType ); printFirstParameterType("SomeFunc"); printFirstParameterType("SomeArrayFunc"); var iEnumerableT = Type.GetType("System.Collections.Generic.IEnumerable`1"); printType(iEnumerableT); var iEnumerableTFromTypeof = typeof(IEnumerable<>); printType(iEnumerableTFromTypeof); var arrayOfT = Type.GetType("T[]"); printType(arrayOfT); // Prints "(null)" // ... not even sure where to start for typeof(T[]) } } The output is: System.Collections.Generic.IEnumerable`1[T] T[] System.Collections.Generic.IEnumerable`1[T] System.Collections.Generic.IEnumerable`1[T] (null) I'd like to correct that last "(null)". This will be used to get an overload of a function via reflections by specifying the method signature: var someMethod = someType.GetMethod("MethodName", new[] { typeOfArrayOfT }); // ... call someMethod.MakeGenericMethod some time later I've already gotten my code mostly working by filtering the result of GetMethods(), so this is more of an exercise in knowledge and understanding.

  Read the article

• Dictionary w/ null key?

  - by Ralph

  Firstly, why doesn't Dictionary<TKey, TValue> support a single null key? Secondly, is there an existing dictionary-like collection that does? I want to store an "empty" or "missing" or "default" System.Type, thought null would work well for this. More specifically, I've written this class: class Switch { private Dictionary<Type, Action<object>> _dict; public Switch(params KeyValuePair<Type, Action<object>>[] cases) { _dict = new Dictionary<Type, Action<object>>(cases.Length); foreach (var entry in cases) _dict.Add(entry.Key, entry.Value); } public void Execute(object obj) { var type = obj.GetType(); if (_dict.ContainsKey(type)) _dict[type](obj); } public static void Execute(object obj, params KeyValuePair<Type, Action<object>>[] cases) { var type = obj.GetType(); foreach (var entry in cases) { if (entry.Key == null || type.IsAssignableFrom(entry.Key)) { entry.Value(obj); break; } } } public static KeyValuePair<Type, Action<object>> Case<T>(Action action) { return new KeyValuePair<Type, Action<object>>(typeof(T), x => action()); } public static KeyValuePair<Type, Action<object>> Case<T>(Action<T> action) { return new KeyValuePair<Type, Action<object>>(typeof(T), x => action((T)x)); } public static KeyValuePair<Type, Action<object>> Default(Action action) { return new KeyValuePair<Type, Action<object>>(null, x => action()); } } For switching on types. There are two ways to use it: Statically. Just call Switch.Execute(yourObject, Switch.Case<YourType>(x => x.Action())) Precompiled. Create a switch, and then use it later with switchInstance.Execute(yourObject) Works great except when you try to add a default case to the "precompiled" version (null argument exception).

  Read the article

• C++: why a self pointer of a struct automatically changes to void*

  - by Stone

  struct ptr{ int node; ptr *next; ptr(){} ptr(int _node, ptr *_next){ node=_node; next=_next; } }; struct list_t{ ptr *sht; int size; void push(int node){ size++; sht=new ptr(node,sht); } }shthead[100001], comp[200001], tree[200001]; The struct ptr is a smart pointer, be used as a linked list. But when I debug the code in gdb, I found that the ptr*'s were all converted to void*. GDB output: (gdb) pt ptr type = struct ptr { int node; void *next; public: ptr(void); ptr(int, void *); } However, I can still see the data of the struct if I covert them back to ptr* in gdb. What's the reason for this please?

  Read the article

• Java giving incorrect year values

  - by whistler

  Something very, very strange is occurring in my program, and I'm wondering if anyone out there has seen this occur before. And, if so, how to fix it. Basically, I am parsing an csv file...no problem there. One column contains a date and I am taking it in as a String and changing to a Date object. Again, no problem there. The code is as follows: SimpleDateFormat dateFormat = new SimpleDateFormat("MM/dd/yy hh:mm"); Date initialDate = new Date(); try { initialDate = dateFormat.parse(rows.get(0)[8]); System.out.println(initialDate); } catch (ParseException e) { // TODO Auto-generated catch block e.printStackTrace(); } Of course, I'm parsing other columns as well (and those are working fine). So, when I run my program for a small csv file (2.8 MB), the dates come out (i.e. are parsed) perfectly. However, when I run the program for a large csv file (25 MB), the dates are a hot mess. For example, take a look at the year values I am getting (the following is just a tiny portion of the println output from the code above): 1000264 at Sun Nov 05 15:30:00 EST 2186 1000320 at Sat Mar 04 17:30:00 EST 2169 1000347 at Sat Apr 01 09:45:00 EDT 2169 1000413 at Tue Jul 09 13:00:00 EDT 2182 1000638 at Fri Dec 11 13:45:00 EST 2167 1000667 at Wed Dec 10 10:00:00 EST 2188 1000690 at Mon Jan 02 13:00:00 EST 2169 1000843 at Thu Feb 11 13:30:00 EST 2196 In actuality, the years are in the realm of 1990-2006 or so. Again, this does not happen with the small csv file. Does anyone know what's going on here and how I can fix it? I need to process the large csv file (the small one was just for testing purposes). By request, here are the actual dates in the csv file and after that the value given by the code above: 5/20/03 15:30 5/20/03 15:30 8/30/04 9:00 8/30/04 9:00 12/20/04 10:30 12/20/04 10:30 Sun Nov 05 15:30:00 EST 2186 Sun Nov 05 15:30:00 EST 2186 Sun Nov 05 15:30:00 EST 2186 Thu Dec 08 09:00:00 EST 2196 Tue Dec 12 10:30:00 EST 2186 Tue Dec 12 10:30:00 EST 2186

  Read the article

• Threads syncronization with ThreadPoolExecutor

  - by justme1

  I'm trying to implement some logic when I create main(father) thread witch executes several other threads. Then it waits for some condition which child threads creates. After condition is meet the father executes some more child threads. The problem that when I use wait/notify I have java.lang.IllegalMonitorStateException exception. Here is the code: public class MyExecutor { final static ArrayBlockingQueue<Runnable> queue = new ArrayBlockingQueue<Runnable>(10); final static ExecutorService svc = Executors.newFixedThreadPool(1); static final ThreadPoolExecutor threadPool = new ThreadPoolExecutor(5, 8, 10, TimeUnit.SECONDS, queue); public static void main(String[] args) throws InterruptedException { final MyExecutor me = new MyExecutor(); svc.execute(new Runnable() { public void run() { try { System.out.println("Main Thread"); me.execute(threadPool, 1); System.out.println("Main Thread waiting"); wait(); System.out.println("Main Thread notified"); me.execute(threadPool, 2); Thread.sleep(100); threadPool.shutdown(); threadPool.awaitTermination(20000, TimeUnit.SECONDS); } catch (InterruptedException e) { e.printStackTrace(); } } }); svc.shutdown(); svc.awaitTermination(10000, TimeUnit.SECONDS); System.out.println("Main Thread finished"); } public void execute(ThreadPoolExecutor tpe, final int id) { tpe.execute(new Runnable() { public void run() { try { System.out.println("Child Thread " + id); Thread.sleep(2000); System.out.println("Child Thread " + id + " finished"); notify(); } catch (InterruptedException e) { e.printStackTrace(); } } }); } } When I comment wait and notify line I have the following output: Main Thread Main Thread waiting Main Thread notified Child Thread 1 Child Thread 2 Child Thread 1 finished Child Thread 2 finished Main Thread finished

  Read the article

• Need help in Hashtable implementation

  - by rafael

  Hi all, i'm quite a beginner in C# , i tried to write a program that extract words from an entered string, the user has to enter a minimum length for the word to filter the words output ... my code doesn't look good or intuitive, i used two arrays countStr to store words , countArr to store word length corresponding to each word .. but the problem is i need to use hashtables instead of those two arrays , because both of their sizes are depending on the string length that the user enter , i think that's not too safe for the memory or something ? here's my humble code , again i'm trying to replace those two arrays with one hashtable , how can this be done ? using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Collections; namespace ConsoleApplication2 { class Program { static void Main(string[] args) { int i = 0 ; int j = 0; string myString = ""; int counter = 0; int detCounter = 0; myString = Console.ReadLine(); string[] countStr = new string[myString.Length]; int[] countArr = new int[myString.Length]; Console.Write("Enter minimum word length:"); detCounter = int.Parse(Console.ReadLine()); for (i = 0; i < myString.Length; i++) { if (myString[i] != ' ') { counter++; countStr[j] += myString[i]; } else { countArr[j] = counter; counter = 0; j++; } } if (i == myString.Length) { countArr[j] = counter; } for (i = 0; i < myString.Length ; i++) { if (detCounter <= countArr[i]) { Console.WriteLine(countStr[i]); } } Console.ReadLine(); } } }

  Read the article

• setting value to a parameter - always saying that it is null REALLY NEED INPUT

  - by Amina

  So I have this schedule visit page with two groups. Group 1 contains a list of: Cases. Group 2 contains a list of: Parties. each group has a checkboxes next to its item for the user to select. My Issue when i select a case and/or a party and save -- then go to the edit page of the visit i just saved and only my selected case is checked and the party i selected is not checked. After debugging i realized that the partyId is not being saved properly during the create page and thus not showing as selected or saved on the edit page. I really need help on how to properly save the party selected and setting for it a value from the parameter. Here is my code of what i have for saving a case and would like to know how to properly save with party. Controller [HttpPost] [ValidateInput(false)] public ActionResult Create(VisitViewModel viewModel, Guid[] associatedCasesSelected, Guid[] selectedParties) { if (!ModelState.IsValid) { viewModel.Time = _timeEntryHelper.Value; AddLookupsToViewModel(viewModel); return View(viewModel); } var visitEntry = Mapper.Map<VisitViewModel, VisitEntry>(viewModel); ... viewModel.CasePartyIds = selectedParties; try { _visitEntryService.Create(visitEntry, associatedCasesSelected); this.FlashInfo(string.Format(Message.ConfirmationMessageCreate, Resources.Entities.Visit.EntityName)); } catch (RulesException ex) { ex.CopyTo(ModelState); } if (ModelState.IsValid) return RedirectToAction("Edit", "Case", new { caseId = viewModel.CaseId }); AddLookupsToViewModel(viewModel); return View(viewModel); } VisitEntryService public void Create(VisitEntry visitEntry,IList<Guid>caseIds) { EnsureValid(visitEntry); _visitEntryRepository.Save(visitEntry); caseIds = AddCurrentCaseToCases(visitEntry.CaseId, caseIds); foreach (var caseId in caseIds.Distinct()) { var visit = new Visit {CaseId = caseId, VisitEntryId = visitEntry.VisitEntryId}; _visitService.Create(visit); } } AddCurrentCaseToCases private static IList<Guid>AddCurrentCaseToCases(Guid caseId, IEnumerable<Guid>caseIds) { var cases = new List<Guid>(); if (caseIds != null) { cases.AddRange(caseIds); if(!caseIds.Contains(caseId)) cases.Add(caseId); } else cases.Add(caseId); return cases; } VisitService public Visit Get(Guid visitId) { return DataContext.Visits.SingleOrDefault(v => v.VisitId == visitId); } public void Save(Visit visit) { if(visit.VisitId == Guid.Empty) { visit.VisitId = Guid.NewGuid(); DataContext.Visits.InsertOnSubmit(visit); } else { var currentVisit = Get(visit.VisitId); if (currentVisit == null) throw RepositoryExceptionFactory.Create("Visit", "VisitId"); } DataContext.SubmitChanges(); } Any TIPS or IDEAS is greatly appreciated at this time :) The entitiy for the parties will be VisitEntryParty

  Read the article

• backbonejs remove anomaly concept

  - by user1537158

  I was building a small app for adding and deleting li from ul using Backbonejs.One of the SO members cymen helped me code it, using that i tailored the code a little.currently if i add one element and delete , it works , but the second time i add an element (to ul) and go to delete it , i get Uncaught TypeError: Cannot call method 'remove' of undefined Pasting my code here , HTML : <input type="text" id="name"> <button id="add">Add</button> <ul id="mylist"></ul> JS: $(function(){ var myCollection = Backbone.Collection.extend(); var myView = Backbone.View.extend({ el:$('body'), tagName:'li', initialize : function(e){ this.collection.bind("add",this.render,this); this.collection.bind("remove",this.render,this); }, events:{ 'click #add' : 'addfoo' }, addfoo : function(){ var myname= $('#name').val(); $('#name').val(''); this.collection.add({name:myname}); }, render : function(){ $('#mylist').empty(); this.collection.each(function(model){ console.log("myView"); var remove = new myRemoveView({model:model}); remove.render(); }); } }); var myRemoveView = Backbone.View.extend({ el:$('body'), events:{ 'click .button':'removeFoo' }, removeFoo : function(){ console.log("here"); this.model.collection.remove(this.model); }, render : function(){ console.log("second view"); $('#mylist').append('<li>'+this.model.get('name') + "<button class='button'>"+"delete"+"</button></li>"); return; } }); var view = new myView({collection: new myCollection()}); }); Two things i did not understand : i) in the removeFoo function , we write this.model.collection.remove(this.model) shouldnt this have been this.collection.model.remove , something of that sort ? ii) i add a li to ul , then i delete it , when i add another li (appending to ul works perfect) but this time when i go to delete it throws me the above error : Uncaught TypeError :cannot call method 'remove' of undefined can you please help me figure out these 2 doubts in my code , btw SO member cymen's code works like a charm only my tailored code (above) is giving me errors. SO member cymen's code : JS Fiddle for his code Thank you

  Read the article

• SVG rotate deletes Elemets

  - by user1468661

  I'm trying to generate svg-Code in a web-application. Here's an example output: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd"> <svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:ev="http://www.w3.org/2001/xml-events" version="1.1" baseProfile="full" width="1000px" height="600px"> <rect x="147.50198255352893" y="109.43695479777953" width="15.860428231562253" height="295.79698651863595" stroke="rgb(0,0,0)" fill="rgb(255,255,255)" stroke-width="3" transform="rotate(20 155.43219666931006 257.3354480570975)"/> <rect x="163.36241078509119" y="405.2339413164155" width="379.85725614591587" height="-23.79064234734335" stroke="rgb(0,0,0)" fill="rgb(255,255,255)" stroke-width="3" transform="rotate(20 353.2910388580491 393.3386201427438)"/> <rect x="543.219666931007" y="381.44329896907215" width="22.204599524187188" height="-353.6875495638382" stroke="rgb(0,0,0)" fill="rgb(255,255,255)" stroke-width="3" transform="rotate(20 554.3219666931006 204.59952418715304)"/> </svg> There should be three rotated Rectangles, but somehow in Chrome, Safari, and Inkscape only one of them is displayed. I did google and have no clue what is wrong. Thx for your help.

  Read the article

• Android getSelectedItem, how to use?

  - by user1881184

  Im trying use the spinner control result in order to point it to another screen that would be on the app. For example in the spinner control if the user chose chevy it would then take you to another screen which is coded in chevy.xml and Chevy.class. This is what i have thus far and need some help, as our book only used getSelectedItem and the example was only for an output statement. Please help. import android.app.Activity; import android.content.Intent; import android.os.Bundle; import android.view.View; import android.widget.AdapterView; import android.widget.AdapterView.OnItemSelectedListener; import android.widget.Spinner; public class Mainpage extends Activity implements OnItemSelectedListener { String carChoice, chevy, ford, dodge, toyota; public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); /* carChoice = group.getSelectedItem().toString(); } if (carChoice.compareTo(chevy)==0) { startActivity(new Intent(Mainpage.this, Chevy.class)); */ } public void onItemSelected(AdapterView<?> arg0, View arg1, int arg2, long arg3) { final Spinner group = (Spinner) findViewById(R.id.carGroup); group.setOnItemSelectedListener(this); // TODO Auto-generated method stub String selected = group.getItemAtPosition(1).toString(); } public void onNothingSelected(AdapterView<?> arg0) { // TODO Auto-generated method stub } }

  Read the article

• Submitting form in php file accessed by Ajax?

  - by dronnoc

  Hi people, I am trying to figure out how to submit a form in a page being accessed by Ajax? here are some code snippets to help demonstrate what i am trying to say. HTML BODY - THIS IS WHAT THE USER WILL SEE. <html> <head> <script language="javascript" src="linktoajaxfile.js"> </head> <body onLoad="gotoPage(0)"> <div id="fillThis"> </div> </body> </html> AJAX FILE var xmlhttp function gotoPage(phase) { xmlhttp=GetXmlHttpObject(); if (xmlhttp==null) { alert ("Your browser does not support AJAX!"); return; } var url="pageofstuffce.php"; url=url+"?stg="+phase; url=url+"&sid="+Math.random(); xmlhttp.onreadystatechange=stateChanged; xmlhttp.open("GET",url,true); xmlhttp.send(null); } function stateChanged() { if (xmlhttp.readyState==4) { document.getElementById("fillThis").innerHTML=xmlhttp.responseText; } } function GetXmlHttpObject() { if (window.XMLHttpRequest) { // code for IE7+, Firefox, Chrome, Opera, Safari return new XMLHttpRequest(); } if (window.ActiveXObject) { // code for IE6, IE5 return new ActiveXObject("Microsoft.XMLHTTP"); } return null; } PAGE OF DATA <?php $stage = $_GET['stg']; if($stage == 0) { echo '<a onClick="gotoPage(1)">click me</a>'; } elseif($stage == 1) { <form> <input type="text" name="name"> <input type="submit" name="submit"> </form> } elseif(somehow can reach here) { show data from form. } ?> Can anyone perhaps help me get past the form and display the data in the same page? Also, i have looked around, and i don't think anything around has what i need... correct me if i'm wrong though :) Thanks in advance, and i hope i didn't put in too much detail :) Dronnoc EDIT Forgot to mention what I've tried; I have tried submitting the form to itself (same file) and that destroyed the ajax link, and opened the page. i have also tried just having the button move the page onto another step, but the $_POST variable is empty... i am at a loss, so does anyone else have any ideas?

  Read the article

• Inputs inside ListView doesn't change values from old to recently set on ItemUpdating event

  - by Tema

  Hi, I would appreciate if someone help me to understand this situation. I do not know why but when i edit selected ListView item (containing few TextBoxes) and then press Update button in the ItemUpdating event i always get old values instead of those which were typed recently. Why? I do not use Page_Load event so i do not need check on PostBack I try to get value before i bind data from DB to ListView, so it can't override recently typed values I tried to get TextBoxes values in different Event handlers - ItemCommand, ItemUpdating, ItemDataBound - result si always the same Collection NewValues and OldValues are always empty (i think this is because i don't use SqlDataSource control) The only one way i can get new values - is to check Request, but in this case i can't use control validators ... so probably it is bad idea to work with only request. This is the code of ItemUpdating method: ListViewItem editItem = AdminUsersListView.EditItem; Guid userId = new Guid((editItem.FindControl("UserId") as HiddenField).Value); Hashtable dataUpdate = new Hashtable { { "UserName", Request[ (editItem.FindControl("UserNameNew") as TextBox).UniqueID ] }, { "Email", Request[ (editItem.FindControl("Email") as TextBox).UniqueID ] }, { "IsApproved", Request[ (editItem.FindControl("IsApproved") as CheckBox).UniqueID ] == "on" }, { "IsLockedOut", Request[ (editItem.FindControl("IsLockedOut") as CheckBox).UniqueID ] == "on" } }; var x1 = dataUpdate["UserName"]; // this is corrent new value from Request var x2 = (editItem.FindControl("UserNameNew") as TextBox).Text; // this is WRONG! OLD! value from TextBox ... Why??? using (Entities entities = new Entities()) { aspnet_Membership membershipItem = entities.aspnet_Membership.Where(MBS => MBS.UserId == userId).FirstOrDefault(); membershipItem.Email = dataUpdate["Email"].ToString(); membershipItem.LoweredEmail = membershipItem.Email.ToLower(); membershipItem.IsApproved = Convert.ToBoolean(dataUpdate["IsApproved"]); membershipItem.IsLockedOut = Convert.ToBoolean(dataUpdate["IsLockedOut"]); entities.SaveChanges(); aspnet_Users userItem = entities.aspnet_Users.Where(USR => USR.UserId == userId).FirstOrDefault(); userItem.UserName = dataUpdate["UserName"].ToString(); userItem.LoweredUserName = userItem.UserName.ToLower(); entities.SaveChanges(); } AdminUsersListView.EditIndex = -1; AdminUsersListView.DataSource = _getDataList(); AdminUsersListView.DataBind(); Thanks, Art

  Read the article

• ASP.Net MVC and Windows 7 404 error

  - by Paul Rivers

  O.K. Stupid question..... I sepnt nearly a day getting an MVC site working, and then I published it. After that, the hell began. I'm using Windows 7, Visual Studio 2008 and MVC. I published it and first the Default.aspx wouldn't come up. I gave up on playing with that for a few and just did the easy thing a typed in default.aspx. I'll fix that problem later. So, I clicked on one of my navigation buttons which prior to this worked just fine in the internal development IIS, and I get a 404 error. I spent two days surfing the Microsoft support forums and every other support forum I can find. No fix. So, I tried something a little different. Just to see if I screwed up. I created a new TestMVC application. Set the output to a website on the local IIS. Compiled and after typing in the default.aspx (it was set as the startup file in the project) I then clicked on the About button on the base MVC application. And what do I get? 404. I know this is new, folks, but this is crazy. What is it about this process that would take this much effort to get it right, especially since it works on the test server.

  Read the article

• Heapsort not working in Python for list of strings using heapq module

  - by VSN

  I was reading the python 2.7 documentation when I came across the heapq module. I was interested in the heapify() and the heappop() methods. So, I decided to write a simple heapsort program for integers: from heapq import heapify, heappop user_input = raw_input("Enter numbers to be sorted: ") data = map (int, user_input.split(",")) new_data = [] for i in range(len(data)): heapify(data) new_data.append(heappop(data)) print new_data This worked like a charm. To make it more interesting, I thought I would take away the integer conversion and leave it as a string. Logically, it should make no difference and the code should work as it did for integers: from heapq import heapify, heappop user_input = raw_input("Enter numbers to be sorted: ") data = user_input.split(",") new_data = [] for i in range(len(data)): heapify(data) print data new_data.append(heappop(data)) print new_data Note: I added a print statement in the for loop to see the heapified list. Here's the output when I ran the script: `$ python heapsort.py Enter numbers to be sorted: 4, 3, 1, 9, 6, 2 [' 1', ' 3', ' 2', ' 9', ' 6', '4'] [' 2', ' 3', '4', ' 9', ' 6'] [' 3', ' 6', '4', ' 9'] [' 6', ' 9', '4'] [' 9', '4'] ['4'] [' 1', ' 2', ' 3', ' 6', ' 9', '4']` The reasoning I applied was that since the strings are being compared, the tree should be the same if they were numbers. As is evident, the heapify didn't work correctly after the third iteration. Could someone help me figure out if I am missing something here? I'm running Python 2.4.5 on RedHat 3.4.6-9. Thanks, VSN

  Read the article

• Prolog Beginner: How to unify with arithmentic cmparison operators or how to get a set var to range

  - by sixtyfootersdude

  I am new to prolog. I need to write an integer adder that will add numbers between 0-9 to other numbers 0-9 and produce a solution 0-18. This is what I want to do: add(in1, in2, out) :- in1 < 10, in2 < 10, out < 18. I would like to be able to call it like this: To Check if it is a valid addition: ?- add(1,2,3). true ?- add(1,2,4). false With one missing variable: ?- add(X,2,3). 1 ?- add(1,4,X). 5 With multiple missing variables: ?-add(X,Y,Z). % Some output that would make sense. Some examples could be: X=1, Y=1, Z=2 ; X=2, Y=1, Z=3 ...... I realize that this is probably a pretty simplistic question and it is probably very straightforward. However cording to the prolog tutorial I am using: "Unlike unification Arithmetic Comparison Operators operators cannot be used to give values to a variable. The can only be evaluated when every term on each side have been instantiated."

  Read the article

• Memory Management with returning char* function

  - by RageD

  Hello all, Today, without much thought, I wrote a simple function return to a char* based on a switch statement of given enum values. This, however, made me wonder how I could release that memory. What I did was something like this: char* func() { char* retval = new char; // Switch blah blah - will always return some value other than NULL since default: return retval; } I apologize if this is a naive question, but what is the best way to release the memory seeing as I cannot delete the memory after the return and, obviously, if I delete it before, I won't have a returned value. What I was thinking as a viable solution was something like this void func(char*& in) { // blah blah switch make it do something } int main() { char* val = new char; func(val); // Do whatever with func (normally func within a data structure with specific enum set so could run multiple times to change output) val = NULL; delete val; val = NULL; return 0; } Would anyone have anymore insight on this and/or explanation on which to use? Regards, Dennis M.

  Read the article

• [C# Thread] I'd like access to a share on the network!

  - by JustLooking

  Some Details I am working with VisualWebGUI, so this app is like ASP.NET, and it is deployed on IIS 7 (for testing) For my 'Web Site', Anonymous Authentication is set to a specific user (DomainName\DomainUser). In my web.config, I have impersonation on. This is how I got my app to access the share in the first place. The Problem There is a point in the the app where we use the Thread class, something similar to: Thread myThread = new Thread(new ThreadStart(objInstance.PublicMethod)); myThread.Start(); What I have noticed is that I can write to my logs (text file on the share), everywhere throughout my code, except in the thread that I kicked off. I added some debugging output and what I see for users is: The thread that's kicked off: NT AUTHORITY\NETWORK SERVICE Everywhere else in my code: DomainName\DomainUser (described in my IIS setup) OK, for some reason the thread gets a different user (NETWORK SERVICE). Fine. But, my share (and the actual log file) was given 'Full Control' to the NETWORK SERVICE user (this share resides on a different server than the one that my app is running). If NETWORK SERVICE has rights to this folder, why do I get access denied? Or is there a way to have the thread I kick off have the same user as the process?

  Read the article

< Previous Page | 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006  | Next Page >