Search Results

Search found 1823 results on 73 pages for 'partitions'.

Page 1/73 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Acer S3 SSD and HD Deleted partitions?

  - by user207784

  I'm new to Linux and Ubuntu, and I think I have a problem. I have an Acer Aspire S3 with 20GB SSD and 320GB HD. I installed Ubuntu 12.04 64bit on it today, and when it asked about partitions, without knowing better, I erased the partitions. There is some information at https://help.ubuntu.com/community/AspireS3 about using the SSD and HD efficiently, but since I deleted the partitions, I don't know what to do. How can I recreate the partitions mentioned in the above link so that I can take advantage of having SSD and HD? I installed GParted, but I don't know what I should do now, and I don't want to screw things up further. I greatly appreciate any help that can be offered me. EDIT: I was playing with GParted, and I just realized that I can see dev/sda and dev/sdb, so perhaps I didn't do something horrible to my partitions. I am also sorry for asking such (dumb?) questions. At this point, is there a way to tell whether I have actually screwed up my partitions? Thanks, Joe

  Read the article

• Order of partitions for root, home and swap with respect to Windows partitions

  - by Tim

  I am installing Ubuntu on the same hard drive as Windows 7. The partitions of Windows 7 have already occupied the left part of the hard drive. I was wondering how to arrange the order of partitions of root, home and swap, i.e. which is on the left just besides one Windows partition, which is in the middle and which is on the far right? Is there some consideration regarding about this arrangement? Thanks and regards!

  Read the article

• Please help, mounting other partitions on startup [duplicate]

  - by Kongthap

  This question already has an answer here: Is there a program to mount all of my drives automatically? 2 answers These are my all partitions. This is my /etc/fstab I would like to auto mount sda3 (NTFS), sda6 (ext4), sda7 (ext4) on startup, please help me edit the /etc/fstab file. I've searched for GUI way of doing this but I cannot find pysdm on the software center. Thanks. Edited!!! I've edited fstab as shown in the picture, I got error during booting, please help me find out what went wrong. P.S. I've created /mnt/extdisk1, I copied and pasted the UUID so it was not misspelling.

  Read the article

• Is it OK to create all primary partitions.?

  - by james

  I have a 320GB hard disk. I only use either ubuntu or kubuntu (12.04 for now). I don't want to use windows or any other dual boot os. And i need only 3 partitions on my hard disk. One for the OS and remaining two for data storage. I don't want to create swap also. Now can i create all primary partitions on the hard disk. Are there any disadvantages in doing so. If all the partitions are primary i think i can easily resize partitions in future. On second thought i have the idea of using seperate partition for /home. Is it good practice . If i have to do this, i will create 4 partitions all primary. In any case i don't want to create more than 4 partitions . And i know the limit will be 4. So is it safe to create all 3 or 4 primary partitions. Pls suggest me, What are the good practices . (previously i used win-xp and win-7 on dual boot with 2 primary partitions and that bugged me somehow i don't remember. Since then i felt there should be only one primary partition in a hard disk.) EDIT 1 : Now i will use four partitions in the sequence - / , /home , /for-data , /swap . I have another question. Does a partition need continuous blocks on the disk. I mean if i want to resize partitions later, can i add space from sda3 to sda1. Is it possible and is it safe to do ?

  Read the article

• Fixing partitions and Installing BackTrack

  - by Josh

  My whole problem started when I started trying to install Backtrack(3 or 4) Backtrack was trying to install itself over my entire windows partition (Which I had combined into one when I installed windows 7). So I booted back into windows 7 on my netbook (eee pc 1000 HE btw) I went into disk-manager with the aim of making a partition to install backtrack on but came out with a really screwed up drive. So I had two partions when I started: the windows system partition, and then my main partition and they were blue in diskmanager (I think that has something to do with formatting). After I went through the steps to make a 10 GB FAT32 partition for backtrack I had about five partitons one called PE: that I have no Idea what it is the windows system file, my main partiton 10 GB unallocated space, and two other partions under 50MB each that are both unused space. And they were all converted to simple volumes (Green instead of blue). And backtrack still wants to erase my entire drive. Question number 1: How do I get it back to the way it was? Question 2: How to I get backtrack to dual boot on my netbook?

  Read the article

• How mysql handles partitions internally

  - by shal

  I would like to know how does mysql handles / implements the partitions internally.

  Read the article

• No root partition

  - by christian ashton

  I'm having serious problems trying to install ubuntu 14.04 on my Toshiba Satellite C850 laptop. Whenever I try to install it it says "No root file system found. Please correct this error from the partitioning menu." I've tried to create new partitions but I don't know what size to make them etc. can someone please help me on this? (Is there a way to create partitions through the terminal? I'm new to ubuntu) but i was on it 2 days ago, laptops crashed and now I can't get past the installation. I've created a new partitioning table just need guidance on which partitions to create and how big to make them. I have absolutely no partitions whatsoever on my hard drive (or whatever the partitions are part of) so it will need to be from the very start. Thanks in advance!

  Read the article

• Linux, fdisk: change order of partitions

  - by osgx

  I have a harddrive with 24 logical partitions on it. Half of them are Linux and half are windows. Current ordering is: 3 Linux partitions; 12 windows partitions; 9 Linux partitions. In this setup, Windows can access any of partition (no limits on partition number), but Linux can't access sda16, sda17 ... Can I change numbering of partitions without moving them on disk? I want to put all Linux partitions to be <16; and windows partitions to be 16, so linux will be able to access all linux partitions. I have fdisk/sfdisk and it sees all partitions.

  Read the article

• Partitions and cdrom are not mounted, and the bars are missing in Ubuntu 12.04

  - by nuit

  Provide my spec and sorry for my poor English first. MB: Gigabyte G31M-S2L (bios ver. F9) CPU: intel E5200 2G RAM HD1: WD 160G with 2 partitions (partition 1:60G, NTFS, win xp; partition 2:100G, NTFS) HD2: WD 320G with 2 partitions (partition 3:220G, NTFS; partition 4:100G, ext4, Ubuntu) Recently, I tried to install Ubuntu 12.04 Beta 2 on my desktop PC (on partition 4). At the beginning, everything looked great including the auto-mounting of partitions 1~3 and the unity (3D). However, after I deleted and re-allocated the partitions on HD2 and re-installed Ubuntu on partition 4, the partitions 1~3 are no longer auto-mounted when I logged in the desktop (and even the inserted cdrom would not be mounted either), and the launch bar and menu bar in unity (3D) are missing. The configurations during these two installations are all the same as default. Are there any possible reasons or solutions for this issue? Thank you in advance!

  Read the article

• Partitions and cdrom are not automounted

  - by nuit

  Provide my spec and sorry for my poor English first. MB: Gigabyte G31M-S2L (bios ver. F9) CPU: intel E5200 2G RAM HD1: WD 160G with 2 partitions (partition 1:60G, NTFS, win xp; partition 2:100G, NTFS) HD2: WD 320G with 2 partitions (partition 3:220G, NTFS; partition 4:100G, ext4, Ubuntu) Recently, I tried to install Ubuntu 12.04 Beta 2 on my desktop PC (on partition 4). At the beginning, everything looked great including the auto-mounting of partitions 1~3 and the unity (3D). However, after I deleted and re-allocated the partitions on HD2 and re-installed Ubuntu on partition 4, the partitions 1~3 are no longer auto-mounted when I logged in the desktop (and even the inserted cdrom would not be mounted either). The configurations during these two installations are all the same as default. Are there any possible reasons or solutions for this issue?

  Read the article

• Failed to unmount partitions

  - by msknapp

  I'm trying to install ubuntu from a pen drive. I have windows 7 installed already and want to keep that installation. I have a 3TB drive that has one 2TB partition on it, so the last 1TB is completely unused, which is where I want to install ubuntu. I started ubuntu in "try ubuntu" mode and then opened gparted, and then deleted the unused partition for the last third of my drive, then tried to install ubuntu. During the install, it asked me if I wanted to unmount the drives I already have The installer has detected that the following disks have mounted partitions: /dev/sda, /dev/sdb Do you want the installer to try to unmount the partitions on these disks before continuing? If you leave them mounted, you will not be able to create, delete, or resize partitions on these disks, but you may be able to install to existing partitions there. No, Yes I said no because I don't want to lose my windows 7 installation, nor any of that data. I wonder, if I had said yes above, would I have lost all the data on those drives? Anyways, I hit no and continued. I chose to install ubuntu alongside windows 7, and hit continue. A few minutes passed when this popup appeared: Failed to unmount partitions The installer needs to commit changes to partition tables, but cannot do so because the partitions on the following mount points could not be unmounted: /media/ubuntu/Three\ Terabyte Drive Terabyte\ DriveDrive Please close any applications using these mount points. Would you like the installer to try to unmount these partitions again? Go Back, Continue Why is this not working? What am I supposed to do? ========== Update: I went ahead and said yes, it can unmount those partitions. It finished installing Ubuntu, but now when i start my machine it just takes me to the grub rescue prompt. Seems like it broke something. What can I do now? =============== Results of fdisk -l: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00027e14 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 976771071 488282112 7 HPFS/NTFS/exFAT WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 4294967295 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdc: 16.0 GB, 16008609792 bytes 255 heads, 63 sectors/track, 1946 cylinders, total 31266816 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 * 32 31266815 15633392 c W95 FAT32 (LBA) Disk /dev/sdd: 999.5 GB, 999501594624 bytes 255 heads, 63 sectors/track, 121515 cylinders, total 1952151552 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002ae3f Device Boot Start End Blocks Id System /dev/sdd1 2048 1952151551 976074752 7 HPFS/NTFS/exFAT

  Read the article

• How can I merge partitions of a USB flash drive?

  - by Billy

  I have this USB flash drive which has two partitions separated by the manufacturer. The interface included doesn't allow me to merge them and I was wondering if someone has come across such problem.

  Read the article

• Dealing with three Windows partitions in dual boot installation

  - by Tim

  For dual-boot installation of Ubuntu after Windows. Quoted from ubuntuguide If a Windows boot partition exists as a second NTFS partition, it should be left alone. If there is a Windows recovery partition also installed, it can also be left alone as long as there are only two NTFS partitions total on the hard drive (i.e. there is no NTFS boot partition as well). If there are a total of 3 NTFS partitions on the hard drive, then the third Windows NTFS partition (the recovery partition) should be removed after creating Recovery CDs from it (see here). In the last case where Windows has three partitions, I was wondering why it says the recovery partition shall be removed? Is it possible to keep the three and create another extended partition with several logical partitions for installing Ubuntu and dual-booting the two OSes? I plan to dual-boot install Ubuntu 10.04 with existing Windows 7. Following is the layout of the current partitions of my hard drive viewed from Windows 7: So must I remove the Lenovo_Recovery (Q:) partition for the same reason you give for the first question? Thanks and regards!

  Read the article

• Problem with partitions and 12.04

  - by Wejq

  Can I have some help? I tried to install Ubuntu 12.04 on my laptop, that has some partitions: 2 ntfs (one of them is restricted by the system) 2 ext4s 1 Linux swap But when I insert my CD, and run liveCD (as I am now), the installer can't see any of my partitions, it can see only /dev/sda as unallocated place, so does gparted (Fdisk seems ok). On these partitions I have data, that I can use by windows on NTFS's. Here is some of this data:

  Read the article

• ubuntu 12.04 installer does not recognize drive partitions

  - by endless forms

  I recently purchased a new HP Pavilion HPE desktop running Windows 7. I am trying to install a dual-boot system with 12.04. However, when I run the LiveCD I only get as far as the "Install" window where you can select the partitions for your drives. On the bottom where it says "device for boot loader installation" I have "/dev/sda" and cannot select any other devices. All the options to change the drives are greyed out, most likely because there are no drives in the window. I partitioned my largest drive using the tools within Windows, then booted into the CD, but nothing shows up. I then used Gparted to change the new space from unallocated to an /ext2, and still nothing shows up. The installer does not recognize anything, but when I go into an Ubuntu session and use the disk utility manager I can see the partitions I made. Anything I do has to be done outside of the installer. I have no files on this new computer, so this is the perfect time to install a parallel OS. I would like avoid completely reinstalling Windows, however. I've been over the forums many times, but all the answers I've found have not worked for me. I also tried flagging the new, empty partition as boot, but that screwed Windows up. Also, the WUBI installer hits the same point and quits. I know that the disk itself is fine because I just made another dual boot system on a Gateway PC. This makes me think something within this computer is preventing the installer from "seeing" the drives. Any help would be much appreciated! Edit in response: The main part of the partitioning window shows no partitions, everything is blank. There is no way to add partitions, and all the buttons are useless. I've tried defragging my drive multiple times, and I also used the same disk to dual-boot another PC with no problems, so it's not the disk, it's definitely the computer.

  Read the article

• NTFS partitions hidden under EXT4 file system / partition...want to recover files from NTFS

  - by user7534

  I am new to ubuntu, but very impressed with the system. so one day i tried installing ubuntu 10.10 along with windows in dual boot first place it didnt get installed properly and during second attempt i could do it right but oh...i lost my windows 7 , here is my problem and what i have done till now. i have hdd installed with ubuntu same disk have windows partitions and i need to extract data from those ...very very important i tried to access the same from ubuntu ...can not access it, 3.reinstalled the windows 7 , hdd is not detected 4.during installation ubuntu gone , so reintalled scan in ubuntu says hdd is fine and DiskInternals linux reader actual show the NTFS partitions , recovery tool not able to get any data out. , please help i need data from these partitions...please I feel that i have put ext4 partition on ntfs filesystem...and now not able to access it

  Read the article

• NTFS partitions hidden under EXT4 file system / partion...want to recover files from NTFS

  - by user7534

  Hi all, I am new to ubuntu, but very impressed with the system. so one day i tried installing ubuntu 10.10 along with windows in dual boot first place it didnt get installed properly and during second attempt i could do it right but oh...i lost my windows 7 , here is my problem and what i have done till now. i have hdd installed with ubuntu same disk have windows partitions and i need to extract data from those ...very very important i tried to access the same from ubuntu ...can not access it, 3.reinstalled the windows 7 , hdd is not detected 4.during installation ubuntu gone , so reintalled scan in ubuntu says hdd is fine and DiskInternals linux reader actual show the NTFS partitions , recovery tool not able to get any data out. , please help i need data from these partitions...please I feel that i have put ext4 partition on ntfs filesystem...and now not able to access it

  Read the article

• Fix overlapping partitions

  - by Alex

  I have problem with overlapping partitions. GParted shows me all my disk as unallocated area, output of fdisk below: alex@alex-ThinkPad-SL510:~$ sudo fdisk -l /dev/sda Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xfb4b9b90 Device Boot Start End Blocks Id System /dev/sda1 * 2048 2457599 1227776 7 HPFS/NTFS/exFAT /dev/sda2 2457600 571351724 284447062+ 7 HPFS/NTFS/exFAT /dev/sda3 571342846 604661759 16659457 5 Extended /dev/sda4 604661760 625137663 10237952 7 HPFS/NTFS/exFAT /dev/sda5 598650880 604661759 3005440 82 Linux swap / Solaris /dev/sda6 571342848 598650879 13654016 83 Linux Partition table entries are not in disk order Do I understand correctly that overlapping partitions are sda2 and sda3 (sda2 and sda6 overlaps too, because sda6 is the first chunk of sda3, sda3 has type "extended")? Are sda2 and sda3 the cause of problem? How can i fix it without deleting partitions? My OS is Ubuntu 12.04, 64 bit. Thanks in advance.

  Read the article

• Only recognizes one partition from multi partitions SD card

  - by Jay Ngo

  Hello everybody, I split my sd card into 2 partitions. When i use usb-card-reader to read my sd card, only the one partition shows up on the screen, the other doesn't. I have run the command "sudo fdisk -l" and the result is the same, only one partition is recognized. But i do believe both partitions of my sd card work fine, because i still can boot my single-board computer with that sd card and run some programms, which are inside that unreadable partition. How can i access both partitions of my sd card? Does anyone know how to solve this kind of problem? I really appreciate your help.

  Read the article

• Support for 15,000 Partitions in SQL Server 2008 SP2 and SQL Server 2008 R2 SP1

  In SQL Server 2008 and SQL Server 2008 R2, the number of partitions on tables and indexes is limited to 1,000. This paper discusses how SQL Server 2008 SP2 and SQL Server 2008 R2 SP1 address this limitation by providing an option to increase the limit to 15,000 partitions. It describes how support for 15,000 partitions can be enabled and disabled on a database. It also talks about performance characteristics, certain limitations associated with this support, known issues, and their workarounds. This support is targeted to enterprise customers and ISVs with large-scale decision support or data warehouse requirements. The Future of SQL Server MonitoringMonitor wherever, whenever with Red Gate's SQL Monitor. See it live in action now.

  Read the article

• Only recognizes one of multiple partitions on SD card

  - by Jay Ngo

  Hello everybody, I split my sd card into 2 partitions. When i use usb-card-reader to read my sd card, only the one partition shows up on the screen, the other doesn't. I have run the command "sudo fdisk -l" and the result is the same, only one partition is recognized. But i do believe both partitions of my sd card work fine, because i still can boot my single-board computer with that sd card and run some programms, which are inside that unreadable partition. How can i access both partitions of my sd card? Does anyone know how to solve this kind of problem? I really appreciate your help.

  Read the article

• Ubuntu only recognizes one partition from multi partitions SD card

  - by Jay Ngo

  Hello everybody, I split my sd card into 2 partitions. When i use usb-card-reader to read my sd card, only the one partition shows up on the screen, the other doesn't. I have run the command "sudo fdisk -l" and the result is the same, only one partition is recognized. But i do believe both partitions of my sd card work fine, because i still can boot my single-board computer with that sd card and run some programms, which are inside that unreadable partition. How can i access both partitions of my sd card? Does anyone know how to solve this kind of problem? I really appreciate your help.

  Read the article

• Disable auto-mount for particular partitions on usb drives

  - by nealmcb

  I have a big USB disk with 3 partitions: one for backup and two other bootable ones for installing and testing new distros. I want the backup partition automounted on boot. But I don't want the two test partitions automounted. Despite my use of "noauto" in /etc/fstab, something (gnome?) seems to be mounting them when I plug the drive it. LABEL=mybook /srv/backup ext4 defaults 0 2 LABEL=mybook-root /media/mybook-root ext4 user,noauto 0 2 LABEL=mybook-spare /media/mybook-spare ext4 user,noauto 0 2 In previous Ubuntu distributions it seems that it was possible to configure gnome so it would avoid mounting particular partitions on removable drives like USB: gnome-mount --write-settings --mount-options noauto --device /dev/sda1 This is no longer available in Lucid (when did it go away?) Is there another way to do this now?

  Read the article

• Installing multiple ubuntu partitions on same machine without corrupting GRUB

  - by LGB

  I had only ubuntu installed on my pc, but I felt like adding another ubuntu (same version) partition so I could have one just for work/study and another one just for personal generic use. I installed it and it worked out okay, but I found I needed more space on the new created Ubuntu partition, so I booted up from the Live CD, and used GParted to move/shrink/grow the partitions as the Ubuntu's tutorials suggested it was pretty straightforward. But in doing all this I messed up with Grub, so when I start my system it shows: error: unknow filesystem grub rescue What would be the easiest way to recover it so I could have both partitions working? Btw, it wouldn't be a problem for me to lose the partitions if it's the shortest/easiest way. Thanks in advance.

  Read the article

• Can I resize my partitions?

  - by Tim

  Following is a screenshot of my current partitions shown by gparted Note that the partitions on the right of /dev/sda3, without labels on them in the figure, are /dev/sda6 (for /home), /dev/sda7 (for /), unallocated, and /dev/sda5 (for swap), from left to right, form altogether the primary partition /dev/sda4. I would like to resize the partitions, such that some unused space from /dev/sda7 (for /) and the small unallocated space can be moved to /dev/sda3 (for /windows-d) and make it larger. If it is possible, I wonder how to do that? Thanks and regards!

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >