Search Results

Search found 98885 results on 3956 pages for 'server xml'.

Page 1/3956 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • More than 100,000 articles !

    - by developerit
    In one month, we already got more than 100,000, and we continue to crawl! We plan on hitting 250,000 total articles next month. Due to the large amount of data we are gathering, we are planning on updating our SQL stored procedure to improve performance. We may be migrating to SQL Server 2008 Entreprise, as we are currently running on SQL Server 2005 Express Edition… We are at 400 Mb of data, getting more and more close to the 2 Gb limit. Stay tune for more info and browse daily fresh articles about web development.

    Read the article

  • XML Schema: Namespace issues when importing shared elements

    - by netzwerg
    When trying to import shared definitions from a XML Schema, I can properly reference shared types, but referencing shared elements causes validation errors. This is the schema that imports the shared definitions (example.xsd): <?xml version="1.0" encoding="UTF-8"?> <xs:schema elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:shared="http://shared.com"> <xs:import namespace="http://shared.com" schemaLocation="shared.xsd"/> <xs:element name="example"> <xs:complexType> <xs:sequence> <xs:element ref="importedElement"/> <xs:element ref="importedType"/> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="importedElement"> <xs:complexType> <xs:sequence> <xs:element ref="shared:fooElement"/> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="importedType"> <xs:complexType> <xs:sequence> <xs:element name="bar" type="shared:barType"/> </xs:sequence> </xs:complexType> </xs:element> </xs:schema> These are the shared definitions (shared.xsd): <?xml version="1.0" encoding="UTF-8"?> <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://shared.com" targetNamespace="http://shared.com"> <xs:element name="fooElement"> <xs:simpleType> <xs:restriction base="xs:integer"/> </xs:simpleType> </xs:element> <xs:simpleType name="barType"> <xs:restriction base="xs:integer"/> </xs:simpleType> </xs:schema> Now consider this XML instance: <?xml version="1.0"?> <example xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="example.xsd"> <importedElement> <fooElement>42</fooElement> </importedElement> <importedType> <bar>42</bar> </importedType> </example> When validated, the "importedType" works perfectly fine, but the "importedElement" gives the following error: Invalid content was found starting with element 'fooElement'. One of '{"http://shared.com":fooElement}' is expected I would guess that my troubles are related to namespace issues (hence the somehow misleading "got fooElement but was expecting fooElement") -- any hints on what's wrong here?

    Read the article

  • New Cumulative Updates for SQL Server 2005 & SQL Server 2008 R2

    - by AaronBertrand
    Early this morning, the SQL Server Release Services team pushed out three new cumulative updates for SQL Server. KB #2489375 - SQL Server 2005 SP3 CU #14 (9.00.4317) KB #2489409 - SQL Server 2005 SP4 CU #2 (9.00.5259) KB #2489376 - SQL Server 2008 R2 CU #6 (10.50.1765) There are a lot more fixes in the 2008 R2 update - 43, by my count. In comparison, only 9 fixes for 2005 SP4, and only 2 fixes for 2005 SP3. You can draw your own conclusions from that data, particularly if you are still on SQL Server...(read more)

    Read the article

  • Alternative for namespaces in xml

    - by mridul4c
    I have a web-service which gives a xml feed for number of clients of us, our clients consumes the xml in different types of devices. In our XML we have some namespaces also. But one of our clients can't detect namespaces because of some limitation at their end. But I can't provide a new xml for him as well. Please suggest me something so that I can satisfy the needs of namespaces without using that, so that i can change my xml to be usable by all of them. Thanks in advance.

    Read the article

  • SSIS - XML Source Script

    - by simonsabin
    The XML Source in SSIS is great if you have a 1 to 1 mapping between entity and table. You can do more complex mapping but it becomes very messy and won't perform. What other options do you have? The challenge with XML processing is to not need a huge amount of memory. I remember using the early versions of Biztalk with loaded the whole document into memory to map from one document type to another. This was fine for small documents but was an absolute killer for large documents. You therefore need a streaming approach. For flexibility however you want to be able to generate your rows easily, and if you've ever used the XmlReader you will know its ugly code to write. That brings me on to LINQ. The is an implementation of LINQ over XML which is really nice. You can write nice LINQ queries instead of the XMLReader stuff. The downside is that by default LINQ to XML requires a whole XML document to work with. No streaming. Your code would look like this. We create an XDocument and then enumerate over a set of annoymous types we generate from our LINQ statement XDocument x = XDocument.Load("C:\\TEMP\\CustomerOrders-Attribute.xml");   foreach (var xdata in (from customer in x.Elements("OrderInterface").Elements("Customer")                        from order in customer.Elements("Orders").Elements("Order")                        select new { Account = customer.Attribute("AccountNumber").Value                                   , OrderDate = order.Attribute("OrderDate").Value }                        )) {     Output0Buffer.AddRow();     Output0Buffer.AccountNumber = xdata.Account;     Output0Buffer.OrderDate = Convert.ToDateTime(xdata.OrderDate); } As I said the downside to this is that you are loading the whole document into memory. I did some googling and came across some helpful videos from a nice UK DPE Mike Taulty http://www.microsoft.com/uk/msdn/screencasts/screencast/289/LINQ-to-XML-Streaming-In-Large-Documents.aspx. Which show you how you can combine LINQ and the XmlReader to get a semi streaming approach. I took what he did and implemented it in SSIS. What I found odd was that when I ran it I got different numbers between using the streamed and non streamed versions. I found the cause was a little bug in Mikes code that causes the pointer in the XmlReader to progress past the start of the element and thus foreach (var xdata in (from customer in StreamReader("C:\\TEMP\\CustomerOrders-Attribute.xml","Customer")                                from order in customer.Elements("Orders").Elements("Order")                                select new { Account = customer.Attribute("AccountNumber").Value                                           , OrderDate = order.Attribute("OrderDate").Value }                                ))         {             Output0Buffer.AddRow();             Output0Buffer.AccountNumber = xdata.Account;             Output0Buffer.OrderDate = Convert.ToDateTime(xdata.OrderDate);         } These look very similiar and they are the key element is the method we are calling, StreamReader. This method is what gives us streaming, what it does is return a enumerable list of elements, because of the way that LINQ works this results in the data being streamed in. static IEnumerable<XElement> StreamReader(String filename, string elementName) {     using (XmlReader xr = XmlReader.Create(filename))     {         xr.MoveToContent();         while (xr.Read()) //Reads the first element         {             while (xr.NodeType == XmlNodeType.Element && xr.Name == elementName)             {                 XElement node = (XElement)XElement.ReadFrom(xr);                   yield return node;             }         }         xr.Close();     } } This code is specifically designed to return a list of the elements with a specific name. The first Read reads the root element and then the inner while loop checks to see if the current element is the type we want. If not we do the xr.Read() again until we find the element type we want. We then use the neat function XElement.ReadFrom to read an element and all its sub elements into an XElement. This is what is returned and can be consumed by the LINQ statement. Essentially once one element has been read we need to check if we are still on the same element type and name (the inner loop) This was Mikes mistake, if we called .Read again we would advance the XmlReader beyond the start of the Element and so the ReadFrom method wouldn't work. So with the code above you can use what ever LINQ statement you like to flatten your XML into the rowsets you want. You could even have multiple outputs and generate your own surrogate keys.        

    Read the article

  • SQL Authority News – Download Microsoft SQL Server 2014 Feature Pack and Microsoft SQL Server Developer’s Edition

    - by Pinal Dave
    Yesterday I attended the SQL Server Community Launch in Bangalore and presented on Performing an effective Presentation. It was a fun presentation and people very well received it. No matter on what subject, I present, I always end up talking about SQL. Here are two of the questions I had received during the event. Q1) I want to install SQL Server on my development server, where can we get it for free or at an economical price (I do not have MSDN)? A1) If you are not going to use your server in a production environment, you can just get SQL Server Developer’s Edition and you can read more about it over here. Here is another favorite question which I keep on receiving it during the event. Q2) I already have SQL Server installed on my machine, what are different feature pack should I install and where can I get them from. A2) Just download and install Microsoft SQL Server 2014 Service Pack. Here is the link for downloading it. The Microsoft SQL Server 2014 Feature Pack is a collection of stand-alone packages which provide additional value for Microsoft SQL Server. It includes tool and components for Microsoft SQL Server 2014 and add-on providers for Microsoft SQL Server 2014. Here is the list of component this product contains: Microsoft SQL Server Backup to Windows Azure Tool Microsoft SQL Server Cloud Adapter Microsoft Kerberos Configuration Manager for Microsoft SQL Server Microsoft SQL Server 2014 Semantic Language Statistics Microsoft SQL Server Data-Tier Application Framework Microsoft SQL Server 2014 Transact-SQL Language Service Microsoft Windows PowerShell Extensions for Microsoft SQL Server 2014 Microsoft SQL Server 2014 Shared Management Objects Microsoft Command Line Utilities 11 for Microsoft SQL Server Microsoft ODBC Driver 11 for Microsoft SQL Server – Windows Microsoft JDBC Driver 4.0 for Microsoft SQL Server Microsoft Drivers 3.0 for PHP for Microsoft SQL Server Microsoft SQL Server 2014 Transact-SQL ScriptDom Microsoft SQL Server 2014 Transact-SQL Compiler Service Microsoft System CLR Types for Microsoft SQL Server 2014 Microsoft SQL Server 2014 Remote Blob Store SQL RBS codeplex samples page SQL Server Remote Blob Store blogs Microsoft SQL Server Service Broker External Activator for Microsoft SQL Server 2014 Microsoft OData Source for Microsoft SQL Server 2014 Microsoft Balanced Data Distributor for Microsoft SQL Server 2014 Microsoft Change Data Capture Designer and Service for Oracle by Attunity for Microsoft SQL Server 2014 Microsoft SQL Server 2014 Master Data Service Add-in for Microsoft Excel Microsoft SQL Server StreamInsight Microsoft Connector for SAP BW for Microsoft SQL Server 2014 Microsoft SQL Server Migration Assistant Microsoft SQL Server 2014 Upgrade Advisor Microsoft OLEDB Provider for DB2 v5.0 for Microsoft SQL Server 2014 Microsoft SQL Server 2014 PowerPivot for Microsoft SharePoint 2013 Microsoft SQL Server 2014 ADOMD.NET Microsoft Analysis Services OLE DB Provider for Microsoft SQL Server 2014 Microsoft SQL Server 2014 Analysis Management Objects Microsoft SQL Server Report Builder for Microsoft SQL Server 2014 Microsoft SQL Server 2014 Reporting Services Add-in for Microsoft SharePoint Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL

    Read the article

  • MS12-070 : Security Updates for all supported versions of SQL Server

    - by AaronBertrand
    This week there was a security release for all supported versions of SQL Server . Each version has 32-bit and 64-bit patches, and each version has GDR (General Distribution Release) and QFE (Quick-Fix Engineering) patches. GDR should be applied if you are at the base (RTM or SP) build for your version, while QFE should be applied if you have installed any cumulative updates after the RTM or SP build. ( More details here .) SQL Server 2005 RTM, SP1, SP2, SP3 - not supported SP4 - GDR = 9.00.5069,...(read more)

    Read the article

  • SQL SERVER – Resolving SQL Server Connection Errors – SQL in Sixty Seconds #030 – Video

    - by pinaldave
    One of the most famous errors related to SQL Server is about connecting to SQL Server itself. Here is how it goes, most of the time developers have worked with SQL Server and knows pretty much every error which they face during development language. However, hardly they install fresh SQL Server. As the installation of the SQL Server is a rare occasion unless you are DBA who is responsible for such an instance – the error faced during installations are pretty rare as well. I have earlier written an article about this which describes how to resolve the errors which are related to SQL Server connection. Even though the step by step directions are pretty simple there are many first time IT Professional who are not able to figure out how to resolve this error. I have quickly built a video which is covering most of the solutions related to resolving the connection error. In the Fix SQL Server Connection Error article following workarounds are described: SQL Server Services TCP/IP Settings Firewall Settings Enable Remote Connection Browser Services Firewall exception of sqlbrowser.exe Recreating Alias Related Tips in SQL in Sixty Seconds: SQL SERVER – FIX : ERROR : (provider: Named Pipes Provider, error: 40 – Could not open a connection to SQL Server) (Microsoft SQL Server, Error: ) SQL SERVER – Could not connect to TCP error code 10061: No connection could be made because the target machine actively refused it SQL SERVER – Connecting to Server Using Windows Authentication by SQLCMD SQL SERVER – Fix : Error: 15372 Failed to generate a ser instance od SQL Server due to a failure in starting the process for the user instance. The connection will be closed SQL SERVER – Dedicated Access Control for SQL Server Express Edition – An error occurred while obtaining the dedicated administrator connection (DAC) port. SQL SERVER – Fix : Error: 4064 – Cannot open user default database. Login failed. Login failed for user What would you like to see in the next SQL in Sixty Seconds video? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology, Video Tagged: Excel

    Read the article

  • Use XQuery to Access XML in Emacs

    - by Gregory Burd
    There you are working on a multi-MB/GB/TB XML document or set of documents, you want to be able to quickly query the content but you don't want to load the XML into a full-blown XML database, the time spent setting things up is simply too expensive. Why not combine a great open source editor, Emacs, and a great XML XQuery engine, Berkeley DB XML? That is exactly what Donnie Cameron did. Give it a try.

    Read the article

  • Validating an XML document fragment against XML schema

    - by shylent
    Terribly sorry if I've failed to find a duplicate of this question. I have a certain document with a well-defined document structure. I am expressing that structure through an XML schema. That data structure is operated upon by a RESTful service, so various nodes and combinations of nodes (not the whole document, but fragments of it) are exposed as "resources". Naturally, I am doing my own validation of the actual data, but it makes sense to validate the incoming/outgoing data against the schema as well (before the fine-grained validation of the data). What I don't quite grasp is how to validate document fragments given the schema definition. Let me illustrate: Imagine, the example document structure is: <doc-root> <el name="foo"/> <el name="bar"/> </doc-root> Rather a trivial data structure. The schema goes something like this: <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <xsd:element name="doc-root"> <xsd:complexType> <xsd:sequence> <xsd:element name="el" type="myCustomType" /> </xsd:sequence> </xsd:complexType> </xsd:element> <xsd:complexType name="myCustomType"> <xsd:attribute name="name" use="required" /> </xsd:complexType> </xsd:schema> Now, imagine, I've just received a PUT request to update an 'el' object. Naturally, I would receive not the full document or not any xml, starting with 'doc-root' at its root, but the 'el' element itself. I would very much like to validate it against the existing schema then, but just running it through a validating parser wouldn't work, since it will expect a 'doc-root' at the root. So, again, the question is, - how can one validate a document fragment against an existing schema, or, perhaps, how can a schema be written to allow such an approach. Hope it made sense.

    Read the article

  • SQL SERVER – Color Coding SQL Server Management Studio Status Bar – SQL in Sixty Seconds #023 – Video

    - by pinaldave
    I often see developers executing the unplanned code on production server when they actually want to execute on the development server. Developers and DBAs get confused because when they use SQL Server Management Studio (SSMS) they forget to pay attention to the server they are connecting. It is very easy to fix this problem. You can select different color for a different server. Once you have different color for different server in the status bar, it will be easier for developer easily notice the server against which they are about to execute the script. Personally when I work on SQL Server development, here is the color code, which I follow. I keep Green for my development server, blue for my staging server and red for my production server. Honestly color coding does not signify much but different color for different server is the key here. More Tips on SSMS in SQL in Sixty Seconds: Generate Script for Schema and Data in SQL Server – SQL in Sixty Seconds #021  Remove Debug Button in SQL Server Management Studio – SQL in Sixty Seconds #020  Three Tricks to Comment T-SQL in SQL Server Management Studio – SQL in Sixty Seconds #019  Importing CSV into SQL Server – SQL in Sixty Seconds #018   Tricks to Replace SELECT * with Column Names – SQL in Sixty Seconds #017 I encourage you to submit your ideas for SQL in Sixty Seconds. We will try to accommodate as many as we can. If we like your idea we promise to share with you educational material. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology, Video

    Read the article

  • Windows Server 2003 Terminal Server does not give out all available licenses

    - by Erwin Blonk
    I installed the Terminal Server role in Windows Server 2003 Standard 64-bits. Still, only 2 connections are allowed. The License Manager says that there are 10 Device CALs available, which is correct, and that none are given out. For good measure I let the server reboot, to no effect. Before this, there was another server (same Windows, except that it is 32 bits) active as a licensing server. I removed the role first and then then added it to the new server. I then removed the Terminal Server Licensing Server component off the old one and added it to the new one. After that, I added to licenses. When that didn't give the required result, I rebooted to new server. Still, the new server, with licenses and all, acts as if it has the 2 license RDP. The server are all stand-alone, there is no active directory been set up. Both servers are in different workgroups. Update (4/12/10): The server has changed the entries in the Terminal Server Licensing a few times. After installing the licenses it added an entry of which the exact phrasing I forgot but it was about temporary Windows 2003 device licenses. Later it added Windows Server 2003 - TS Per Device CAL. The temporary held 2 licenses (standard RDP licenses, I think) and the other 10. At some point, seemingly unrelated from the testing we did, it used a licenses from the new pool. This morning, 2 licenses were used from the pool of 10 and only 1 from the temporary/RDP pool (I wish I had screenshots to show, it changed every few hours oir so it seems). Although I had already activated the server over the internet, and re-activated it, I decided to go through the whole procedure by phone. Long story short, here is what it says now: Existing Windows 2000 Server, type:built-in [no licenses used, I add for for sake of being complete] Windows Server 2003 - Terminal Server Per Device CAL Token, type:open [none of 10 used] Windows Server 2003 - TS Per Device CAL, type:open [3 of 10 used] As I tried to explain, this is the end result after a few changes, most of which I can't directly connect to any action from my part. Only going to the activation procedure by phone seemed to directly effect the TS, resulting in the above configuration. Still, it is impossible to connect with more than 3 people, which is 1 up from the 2 that could connect yesterday. TS does say 7 licenses are avaible. Yet it won't give them out.

    Read the article

  • Windows Server 2003 Terminal Server with installed licenses will not go beyond 2 connections

    - by Erwin Blonk
    I installed the Terminal Server role in Windows Server 2003 Standard 64-bits. Still, only 2 connections are allowed. The License Manager says that there are 10 Device CALs available, which is correct, and that none are given out. For good measure I let the server reboot, to no effect. Before this, there was another server (same Windows, except that it is 32 bits) active as a licensing server. I removed the role first and then then added it to the new server. I then removed the Terminal Server Licensing Server component off the old one and added it to the new one. After that, I added to licenses. When that didn't give the required result, I rebooted to new server. Still, the new server, with licenses and all, acts as if it has the 2 license RDP. The server are all stand-alone, there is no active directory been set up. Both servers are in different workgroups.

    Read the article

  • Migrate database from SQL Server Standard to SQL Server Express for DotNetNuke

    - by Bjørn
    Hello, we have an old server that we want to dedicate fully as a public webserver (hosting a few DotNetNuke sites), and for this purpose we would like to install SQL Server Express (probably 2008) on the server and thus have both the Database server and the Web Server on the machine. But: The databases for the webserver are hosted on a SQL Server 2005 Standard today. So the question is: Is it possible to move a database from a Standard Server to an Express Server?

    Read the article

  • Windows Server 2003 Terminal Server does not give out all available licenses (solved)

    - by Erwin Blonk
    I installed the Terminal Server role in Windows Server 2003 Standard 64-bits. Still, only 2 connections are allowed. The License Manager says that there are 10 Device CALs available, which is correct, and that none are given out. For good measure I let the server reboot, to no effect. Before this, there was another server (same Windows, except that it is 32 bits) active as a licensing server. I removed the role first and then then added it to the new server. I then removed the Terminal Server Licensing Server component off the old one and added it to the new one. After that, I added to licenses. When that didn't give the required result, I rebooted to new server. Still, the new server, with licenses and all, acts as if it has the 2 license RDP. The server are all stand-alone, there is no active directory been set up. Both servers are in different workgroups. Update (4/12/10): The server has changed the entries in the Terminal Server Licensing a few times. After installing the licenses it added an entry of which the exact phrasing I forgot but it was about temporary Windows 2003 device licenses. Later it added Windows Server 2003 - TS Per Device CAL. The temporary held 2 licenses (standard RDP licenses, I think) and the other 10. At some point, seemingly unrelated from the testing we did, it used a licenses from the new pool. This morning, 2 licenses were used from the pool of 10 and only 1 from the temporary/RDP pool (I wish I had screenshots to show, it changed every few hours oir so it seems). Although I had already activated the server over the internet, and re-activated it, I decided to go through the whole procedure by phone. Update 2 (4/12/10) The problem has been solved. It seems the activation over the web, while it said to have succeeded, did not work correctly. After activating by phone, it did work. What was different from the old setup and what put me on the wrong foot from that moment, was that I now need to create seperate user account because a session with one user account will be taken over by someone else when that account is used by that person. On the previous server, it was possible to open several sesions with the same account. We now use Per Device licenses, I'm not sure what was used before. Thanks all for the replies.

    Read the article

  • Modifying SQL Server Schema Collection

    - by Mevdiven
    SQL Server XML Schema Collection is an interesting concept and I find it very useful when designing dynamic data content. However as I work my way through implementing Schema Collections, I find it very difficult to maintain them. Schema Collection DDL allows only CREATE and ALTER/ADD nodes to existing schemes. CREATE XML SCHEMA COLLECTION [ <relational_schema>. ]sql_identifier AS 'XSD Content' ALTER XML SCHEMA COLLECTION [ <relational_schema>. ]sql_identifier ADD 'Schema Component' When you want to remove any node from a schema you have to issue following DDL's. If that schema collection assigned to a table column, you have to alter table to remove schema collection association from that column Drop the schema collection object Re-Create schema collection Alter table column to re-associate schema collection to that column. This is pain when it comes to 100+ of schemes in a collection. Also you have to re-create XML indexes all over again, if any. Any solutions, suggestions, tricks to make this schema collection object editing process easier?

    Read the article

  • SQL Server Agent was not running on Server Dynamics CRM 2013

    - by No1_Melman
    I'm trying to install Dynamics CRM 2013 on a server. This server is on a VM. There are several other VMs, an ADDS & DNS, a MSSQL and a WebServer VM. Each server is a Windows Server 2012 R2. The SQL Server is 2012 Enterprise. Each VM is part of the main Domain, set by the ADDS & DNS. NSLookup confirms I can see the computer at the right IP address. Each separate VM has its own static IP, the DNS is set to the ADDS & DNS. I use the domain administrator to log into all the servers, and make the that domain administrator a local administrator. I've set up all the domain users for the CRM and gave them appropriate permissions, I have also added the accounts to the appropriate places, such that the CRM Deployment user is in the SQL security. The SQL Agent is running. SQL server configuration manager has SQL server network configuration TCP/IP enabled to allow remote connections. The SQL server has the domain user as a administrator, which is the same user being used to install the CRM. In the CRM setup i point to the [Servername]\[Instance] and I have also tried just the [Servername]. to make this easier I called the server MSSQL and left the instance name to the default. I even install the MSSQL instance as the domain administrator. CRM can find the ReportServer url. I have enable all the ports required, including: 135, 1433, 1434, 2382, 2383, 4022. 1434 UDP. I feel like I have absolutely done everything, I have google many times and tried all the different methods, and for the life of me I cant seem to get the CRM setup to find the SQL server agent. It passes everything else perfectly fine. I can even ping the MSSQL server. What is the problem, why does the CRM still keep giving the error: SQLSERVERAGENT (SQLSERVERAGENT) service is not running on the server MSSQL On the MSSQL server, the name of the sql server agent service is: SQL Server Agent (MSSQLSERVER)

    Read the article

  • Parsing XML in a non-XML column

    - by slugster
    Hi, i am reasonably proficient with SQLServer, but i'm not a DBA so i'm not sure how to approach this. I have an XML chunk stored in an ntext column. Due to it being a legacy database and the requirements of the project i cannot change the table (yet). This is an example of the data i need to manipulate: <XmlSerializableHashtable xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <Entries> <Entry> <key xsi:type="xsd:string">CurrentYear</key><value xsi:type="xsd:string">2010</value> </Entry> <Entry> <key xsi:type="xsd:string">CurrentMonth</key><value xsi:type="xsd:string">4</value> </Entry> </Entries> </XmlSerializableHashtable> each row will have a chunk like this, but obviously with different keys/values in the XML. Is there any clever way i can parse this XML in to a name/value pairs style view? Or should i be using SQLServer's XML querying abilities even though it isn't an XML column? If so, how would i query a specific value out of that column? (Note: adding a computed XML column on the end of the table is a possibility, if that helps). Thanks for any assistance!

    Read the article

  • Linked server problem on SQL Server 2005

    - by BradyKelly
    I have a weird issue and I hope someone can steer me in the right direction for resolving this please. When I execute the following query against a linked server, I get the following error. I can connect to the server in SSMS as a separate server, and execute a similar query against its Deposits table. The nn.nn is my own replacement to avoid broadcasting our server addresses. The query: select td.Batch , td.DateTimeDeposited from Deposits cd left join [172.nn.nn.32\sqlexpress].Terminal.dbo.Deposits td on cd.DateTimeDeposited = td.DateTimeDeposited The error: OLE DB provider "SQLNCLI" for linked server "172.nn.nn.11\sqlexpress" returned message "Login timeout expired". OLE DB provider "SQLNCLI" for linked server "172.nn.nn.11\sqlexpress" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". Msg 65535, Level 16, State 1, Line 0 SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. Notice how the error is about server 172.nn.nn.11 and not 172.nn.nn.32. SOLVED (STUPID ME): Somebody had added an extra bit to my query that was scrolled off-screen and was querying the 17.nn.nn.11 server.

    Read the article

  • Can't access SQL Server 2008 from workstations, but can from server

    - by Kev
    We have an app that can use mssql2k or 2k8. We've been using 2k but I decided to try 2k8 to compare. I installed in on our win2k3 server alongside mssql2k. In the ODBC applet on the server, I was able to set up access to 2k8, and it passes the test at the end successfully, whether I tell it to use Windows Authentication or an sql login. The latter is how the app always accessed mssql2k. The app works fine from the server, but when I try it on a workstation (winxpsp3), I get a window titled, "Microsoft SQL Server Login" that says: Connection failed: SQLState: '01000' SQL Server Error: 53 [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). Connection failed: SQLState: '08001' SQL Server ERror: 17 [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied. Then I get the ODBC login dialog, which I can't get to login correctly (I just keep getting the same error above), even copying and pasting a password after resetting it on the server, and whether "trusted" is checked or not. "Options" is disabled. The server was straight SERVERNAME for mssql2k, but for mssql2k8 it's called SERVERNAME\mssql2008. That works on the server, why not on the workstation? (Which I'm logged in as the same person on, BTW.)

    Read the article

  • SQL SERVER – Concat Strings in SQL Server using T-SQL – SQL in Sixty Seconds #035 – Video

    - by pinaldave
    Concatenating  string is one of the most common tasks in SQL Server and every developer has to come across it. We have to concat the string when we have to see the display full name of the person by first name and last name. In this video we will see various methods to concatenate the strings. SQL Server 2012 has introduced new function CONCAT which concatenates the strings much efficiently. When we concat values with ‘+’ in SQL Server we have to make sure that values are in string format. However, when we attempt to concat integer we have to convert the integers to a string or else it will throw an error. However, with the newly introduce the function of CONCAT in SQL Server 2012 we do not have to worry about this kind of issue. It concatenates strings and integers without casting or converting them. You can specify various values as a parameter to CONCAT functions and it concatenates them together. Let us see how to concat the values in Sixty Seconds: Here is the script which is used in the video. -- Method 1: Concatenating two strings SELECT 'FirstName' + ' ' + 'LastName' AS FullName -- Method 2: Concatenating two Numbers SELECT CAST(1 AS VARCHAR(10)) + ' ' + CAST(2 AS VARCHAR(10)) -- Method 3: Concatenating values of table columns SELECT FirstName + ' ' + LastName AS FullName FROM AdventureWorks2012.Person.Person -- Method 4: SQL Server 2012 CONCAT function SELECT CONCAT('FirstName' , ' ' , 'LastName') AS FullName -- Method 5: SQL Server 2012 CONCAT function SELECT CONCAT('FirstName' , ' ' , 1) AS FullName Related Tips in SQL in Sixty Seconds: SQL SERVER – Concat Function in SQL Server – SQL Concatenation String Function – CONCAT() – A Quick Introduction 2012 Functions – FORMAT() and CONCAT() – An Interesting Usage A Quick Trick about SQL Server 2012 CONCAT Function – PRINT A Quick Trick about SQL Server 2012 CONCAT function What would you like to see in the next SQL in Sixty Seconds video? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology, Video Tagged: Excel

    Read the article

  • gwt+xml- can i read through incomplete XML using the GWT XML Parser

    - by Arvind
    I have a requirement where a user is typing in XML in a text area, and I want to show the various nodes in a tree...But as the user is typing in the xml, it wont be a complete xml (since he is still typing in the XML)... How do I read an incomplete XML and correctly generate the tree? I understand how to read an xml and generate nodes in the tree, what I want to know is, how to read the incomplete XML as it is being typed in

    Read the article

  • Why isn't the Spring AOP XML schema properly loaded when Tomcat loads & reads beans.xml

    - by chrisbunney
    I'm trying to use Spring's Schema Based AOP Support in Eclipse and am getting errors when trying to load the configuration in Tomcat. There are no errors in Eclipse and auto-complete works correctly for the aop namespace, however when I try to load the project into eclipse I get this error: 09:17:59,515 WARN XmlBeanDefinitionReader:47 - Ignored XML validation warning org.xml.sax.SAXParseException: schema_reference.4: Failed to read schema document 'http://www.springframework.org/schema/aop/spring-aop-2.5.xsd', because 1) could not find the document; 2) the document could not be read; 3) the root element of the document is not . Followed by: SEVERE: StandardWrapper.Throwable org.springframework.beans.factory.xml.XmlBeanDefinitionStoreException: Line 39 in XML document from /WEB-INF/beans.xml is invalid; nested exception is org.xml.sax.SAXParseException: cvc-complex-type.2.4.c: The matching wildcard is strict, but no declaration can be found for element 'aop:config'. Caused by: org.xml.sax.SAXParseException: cvc-complex-type.2.4.c: The matching wildcard is strict, but no declaration can be found for element 'aop:config'. Based on this, it seems the schema is not being read when Tomcat parses the beans.xml file, leading to the <aop:config> element not being recognised. My beans.xml file is as follows: <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:jaxws="http://cxf.apache.org/jaxws" xmlns:aop="http://www.springframework.org/schema/aop" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.5.xsd http://cxf.apache.org/jaxws http://cxf.apache.org/schemas/jaxws.xsd http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-2.5.xsd"> <!--import resource="classpath:META-INF/cxf/cxf.xml" /--> <!--import resource="classpath:META-INF/cxf/cxf-extension-soap.xml" /--> <!--import resource="classpath:META-INF/cxf/cxf-servlet.xml" /--> <!-- NOTE: endpointName attribute maps to wsdl:port@name & should be the same as the portName attribute in the @WebService annotation on the IWebServiceImpl class --> <!-- NOTE: serviceName attribute maps to wsdl:service@name & should be the same as the serviceName attribute in the @WebService annotation on the ASDIWebServiceImpl class --> <!-- NOTE: address attribute is the actual URL of the web service (relative to web app location) --> <jaxws:endpoint xmlns:tns="http://iwebservices.ourdomain/" id="iwebservices" implementor="ourdomain.iwebservices.IWebServiceImpl" endpointName="tns:IWebServiceImplPort" serviceName="tns:IWebService" address="/I" wsdlLocation="wsdl/I.wsdl"> <!-- To have CXF auto-generate WSDL on the fly, comment out the above wsdl attribute --> <jaxws:features> <bean class="org.apache.cxf.feature.LoggingFeature" /> </jaxws:features> </jaxws:endpoint> <aop:config> <aop:aspect id="myAspect" ref="aBean"> </aop:aspect> </aop:config> </beans> The <aop:config> element in my beans.xml file is copy-pasted from the Spring website to try and remove any possible source of error Can anyone shed any light on why this error is occurring and what I can do to fix it?

    Read the article

  • Create an XML file using Datasets Using info from XML Schema

    - by Voulnet
    Hello there, I have been thinking about the optimal way to create an XML file using data from a Dataset AND according to the rules of an XML schema. I've been searching around for a bit, and I failed to find a way in which I only take the data from the Dataset and put it inside a XML tags, with the tags being defined by an already-existing schema. So it might go like this: 1- Create Dataset and fill its rows with data. 2- Create an XML according to an XML schema rules. 3- Fill said XML file with data from Dataset such that data is taken from the Dataset while structure of the XML file is taken from the XML schema.

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >