Search Results

Search found 82 results on 4 pages for 'siddharth pandey'.

Page 1/4 | 1 2 3 4  | Next Page >

• USB drives not recognized all of a sudden (module usb_storage not loading)

  - by Siddharth

  I am very close to the solution, just need to know how to get usb-storage to load I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. sudo lsusb results Bus.... skipped 4 lines Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 sudo dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Edit : jsiddharth@siddharth-desktop:~$ sudo udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing UDEV [4757.144372] add /module/usb_storage (module) UDEV [4757.146558] remove /module/usb_storage (module) UDEV [4757.148707] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6 (usb) UDEV [4757.149699] add /bus/usb/drivers/usb-storage (drivers) UDEV [4757.151214] remove /bus/usb/drivers/usb-storage (drivers) UDEV [4757.156873] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0 (usb) UDEV [4757.160903] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) UDEV [4757.164672] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165163] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165440] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) Narrowing down more : Seems like I need usb_storage to load as a module jsiddharth@siddharth-desktop:~$ lsmod | grep usb usbserial 37201 0 usbhid 41937 0 hid 77428 1 usbhid Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful.

  Read the article

• USB drives not recognized all of a sudden (usb_storage not loaded lsmod does not report usb_storage)

  - by Siddharth

  I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. sudo lsusb results Bus.... skipped 4 lines Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 sudo dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Edit : jsiddharth@siddharth-desktop:~$ sudo udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing UDEV [4757.144372] add /module/usb_storage (module) UDEV [4757.146558] remove /module/usb_storage (module) UDEV [4757.148707] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6 (usb) UDEV [4757.149699] add /bus/usb/drivers/usb-storage (drivers) UDEV [4757.151214] remove /bus/usb/drivers/usb-storage (drivers) UDEV [4757.156873] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0 (usb) UDEV [4757.160903] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) UDEV [4757.164672] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165163] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165440] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) Narrowing down more : Seems like I need usb_storage to load as a module jsiddharth@siddharth-desktop:~$ lsmod | grep usb usbserial 37201 0 usbhid 41937 0 hid 77428 1 usbhid Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful.

  Read the article

• How to Add Date Picker To VBA UserForm

  - by user1760110

  I am looking for a control to add to userForm to enable user to pick the date.I a good one at this address Formatting MM/DD/YYYY dates in textbox in VBA from Siddharth Rout which is perfect but it generate invisible sheets which is not nessaccary for my application I tried to stop creating sheets but i couldnt figure it out. Can you please let me know how I can properly modified the Siddharth Rout code or ponit me to another application like that? Thanks for you time

  Read the article

• Ubuntu 12.10 installation in virtual box

  - by Rohit Pandey

  I am trying to install Ubuntu 12.10 as guest in virtual box in Windows 7 machine. After intallation and copying the files it asks me to restart Now and I click that button but I get an error that Virtual box stopped working and it prompts me to close the virtual box. When i restart Virtual box, Status in the Ubuntu is displayed as Aborted and after restarting it tries to reinstall Ubuntu. I have tried thrice. Please guide me how to resolve this issue. Regards, Rohit.

  Read the article

• Is it possible to migrate struts/spring based application to GWT?

  - by Satish Pandey

  I am using the combination of spring, spring-security, struts and iBatis in my application. Now I am looking to migrate the struts UI to GWT. The new combination must be spring, spring-security, GWT and iBatis. I applied a layered approach to develop my application. In Controller/UI layer i am using Struts. I want to replace struts and use GWT in Controller/UI layer. Is is possible to use GWT without affecting another layers DAO/BL/SL?

  Read the article

• Difference between spring setter and interface injection?

  - by Satish Pandey

  I know how constructor and setter injection works in spring. Normally I use interfaces instead of classes to inject beans using setter and I consider it as interface injection, but in case of constructor we also use interfaces (I am confused). In following example I use JobProcessor interface instead of JobProcessorImpl class. public class JobScheduler { // JobProcessor interface private JobProcessor jobProcessor; // Dependecy injection public void setJobProcessor(JobProcessor jobProcessor){ this.jobProcessor = jobProcessor; } } I tried to find a solution by googling but there are different opinions by writers. Even some people says that spring doesn't support interface injection in their blogs/statements. Can someone help me by example?

  Read the article

• WebLogic Server internal server error [migrated]

  - by Abhinav Pandey

  When I deployed a project in Apache Tomcat 6.0 it is working fine. When I deployed a same project in WebLogic Server 10.3 it's showing an error: Error 500--Internal Server Error javax.servlet.ServletException: [HTTP:101249][weblogic.servlet.internal.WebAppServletContext@ae43b8 - appName: '_appsdir_ab_dir', name: 'ab', context-path: '/ab', spec-version: 'null']: Servlet class FirstServlet for servlet FirstServlet could not be loaded because the requested class was not found in the classpath . java.lang.UnsupportedClassVersionError: FirstServlet : Unsupported major.minor version 51.0.

  Read the article

• ubuntu 12.04 refuses to install with windows 7

  - by Amitabh Pandey

  I have a desktop computer with windows 7 installed on it . Recently I downloaded ubuntu 12.04 and burned the iso image on a new blank DVD . After successfully burning DVD , I booted from the DVD. Ubutu interface appeared asking me to either choose try ubuntu or install ubuntu . I chose to install ubuntu. Again on next screen I choose to install ubuntu inside windows 7. After pressing continue button the following message appeared : " checking battery state .............. ok checking for running unattended upgrades : acpid : exiting speech dispatcher disabled ; edit /etc/default/ speech -dispatcher Asking all remaining processes to terminate ............. ok Please remove installation media and close the tray (if any) then press enter : " Now the problem is that when I remove the installation media ( ie the DVD ) and press enter then instead of installing ubuntu the computer reboots into windows 7 !!! I am a newbie to ubuntu and therefore do not know much about it . What should I do?

  Read the article

• Setting Higher Z-Index for Sprite

  - by Siddharth

  For my game, I have to set highest z index for my sprite. At present, I wrote following code but didn't work for me. Sprite houseSprite = new Sprite(pX, pY, textureManager.houseBgRegion.deepCopy(), mVertexBufferObjectManager); attachChild(houseSprite); houseSprite.setZIndex(500); sortChildren(); My requirement did not satisfied with setting sprite in the HUD. So any how I have to apply highest z index. Also in my game sprites are dynamically generated as per game play. So members please share your thoughts.

  Read the article

• Rotate Body From Corner

  - by Siddharth

  I want to ask that how to rotate body from corner? movableBeam.getBeamBody().setTransform(movableBeam.getBeamBody().getPosition(), angle); The above line of code rotate the beam from center that I want rotate from one of the conner. Any member please help me. EDIT : float beamCenterX = movableBeam.getX() + movableBeam.getWidth() / 2f; float beamCenterY = movableBeam.getY() + movableBeam.getHeight() / 2f; float cornerOffsetX = movableBeam.getX() - beamCenterX; float cornerOffsetY = movableBeam.getY() - beamCenterY; float bodyAngle = (float) Math.atan2(cornerOffsetY, cornerOffsetX); float newAngle = imageAngle + bodyAngle; float newCornerOffsetX = (float) Math.cos(Math .toDegrees(newAngle)); float newCornerOffsetY = (float) Math.sin(Math .toDegrees(newAngle)); cornerOffsetX = movableBeam.getX() - movableBeam.getWidth() / 2f; cornerOffsetY = movableBeam.getY() - movableBeam.getHeight() / 2f; Vector2 postion = new Vector2( (newCornerOffsetX - cornerOffsetX + movableBeam.getX()) / PhysicsConstants.PIXEL_TO_METER_RATIO_DEFAULT, (newCornerOffsetY - cornerOffsetY + movableBeam.getY()) / PhysicsConstants.PIXEL_TO_METER_RATIO_DEFAULT); movableBeam.getBeamBody().setTransform(postion, newAngle);

  Read the article

• How do I set a touch listener in a child scene in AndEngine?

  - by Siddharth

  In my game, I want to implement touch listener for my child scene objects. Basically I tried all the possible way to implement this that I have usually done for my normal scenes, but those methods do not work here. Could somebody provide some guidance for setting touch area listener in child scene? Here is my code: menuScene.setTouchAreaBindingEnabled(true); menuScene.registerTouchArea(resumeButtonSprite); menuScene.registerTouchArea(retryButtonSprite); menuScene.registerTouchArea(exitButtonSprite); menuScene.setOnAreaTouchListener(new IOnAreaTouchListener() { @Override public boolean onAreaTouched(TouchEvent pSceneTouchEvent, ITouchArea pTouchArea, float pTouchAreaLocalX, float pTouchAreaLocalY) { System.out.println("Touch"); return true; } }); In this code, menuScene was a child scene activity. Also after research I found that my engine was stopped while the child scene was activated so the touch event is not detected. I want to implement a pause menu in my game so any desirable solution for a pause menu implementation would help.

  Read the article

• Installed Ubuntu on a Intel I5 3330 (over a dh 77eb motherboard), networking fails

  - by Siddharth

  To my surprise network fails after Ubuntu installs. modprobe e1000, did not get networking to kick off modprobe e1000e, too did not load Searched for the drivers on the intel site, no linux drivers listed. lspci reports 00:19.0 Ethernet controller [0200]: Intel Corporation Device [8086:1503] (rev 04) Any idea on how to proceed ? Is there a place where I can map driver names (like e1000, e1000e) with the model numbers ?

  Read the article

• Developing JSON API for a Carpool Engine

  - by Siddharth

  I am developing a new set of API methods for carpooling/cab booking, so if a developer needs to develop an app or webportal for carpooling, he can call my JSON API. Basically making it easy for developers. My API current has: AddVehicle AddJourney SearchJourney SubscribeToThisJourney(journey) SubscriberList(journey) to get list of people who have subscribed for this journey AcceptSubscription(subscriber) AcceptedSubcriberList SubscriberList to get list of providers I have subscribed to I need help with replacing subscriber with something else. It's difficult to remember, and confusing when you see 3 methods that mean very different things: SubscriberList, SubscribedToThisJourneyList and AcceptedSubscriberList. Confusing to remember. One is a list of who I have subscribed to Who has subscribed to me Whose subscription I have accepted How can I name these methods to make them easier to understand and remember?

  Read the article

• Combine Two Shader Program

  - by Siddharth

  For my android application, I want to apply brightness and contrast shader on same image. At present I am using gpuimage plugin. In that I found two separate program for brightness and contrast as per the following. Contrast shader: varying highp vec2 textureCoordinate; uniform sampler2D inputImageTexture; uniform lowp float contrast; void main() { lowp vec4 textureColor = texture2D(inputImageTexture, textureCoordinate); gl_FragColor = vec4(((textureColor.rgb - vec3(0.5)) * contrast + vec3(0.5)), textureColor.w); } Brightness shader: varying highp vec2 textureCoordinate; uniform sampler2D inputImageTexture; uniform lowp float brightness; void main() { lowp vec4 textureColor = texture2D(inputImageTexture, textureCoordinate); gl_FragColor = vec4((textureColor.rgb + vec3(brightness)), textureColor.w); } Now applying both of the effects I write following code varying highp vec2 textureCoordinate; uniform sampler2D inputImageTexture; varying highp vec2 textureCoordinate2; uniform sampler2D inputImageTexture2; uniform lowp float contrast; uniform lowp float brightness; void main() { lowp vec4 textureColorForContrast = texture2D(inputImageTexture, textureCoordinate); lowp vec4 contastVec4 = vec4(((textureColorForContrast.rgb - vec3(0.5)) * contrast + vec3(0.5)), textureColorForContrast.w); lowp vec4 textureColorForBrightness = texture2D(inputImageTexture2, textureCoordinate2); lowp vec4 brightnessVec4 = vec4((textureColorForBrightness.rgb + vec3(brightness)), textureColorForBrightness.w); gl_FragColor = contastVec4 + brightnessVec4; } Doesn't able to get desire result. I can't able to figure out what I have to do next? So please friends help me in this. What program I have to write?

  Read the article

• Implement 2x speed in tower of defense type game

  - by Siddharth

  I was currently developing tower of defense game and I want to implement 2x feature for my game. Game usually run with 1x speed that was normal speed of the game. Here what 1x and 2x mean : 1x - mention normal speed of the game, 2x - mention the game object moves with double speed means user experience the fast game play. I want to implement such functionality for my game. The functionality that I want contains in the game Medieval Castle game that was available in the market. https://play.google.com/store/apps/details?id=com.nova.root&feature=search_result#?t=W251bGwsMSwxLDEsImNvbS5ub3ZhLnJvb3QiXQ.. The screen shot also shows the 1x and 2x button in that game. I think for 2x speed of the game I have to increase the speed of each object that were in the game. So any member please help what to do for that implementation. Only idea become enough for me.

  Read the article

• USB drives not recognized all of a sudden

  - by Siddharth

  I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. lsusb results Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful. Thanks.

  Read the article

• Ragdoll continuous movement

  - by Siddharth

  I have created a ragdoll for my game but the problem I found was that the ragdoll joints are not perfectly implemented so they are continuously moving. Ragdoll does not stand at fix place. I here paste my work for that and suggest some guidance about that so that it can stand on fix place. chest = new Chest(pX, pY, gameObject.getmChestTextureRegion(), gameObject); head = new Head(pX, pY - 16, gameObject.getmHeadTextureRegion(), gameObject); leftHand = new Hand(pX - 6, pY + 6, gameObject.getmHandTextureRegion() .clone(), gameObject); rightHand = new Hand(pX + 12, pY + 6, gameObject .getmHandTextureRegion().clone(), gameObject); rightHand.setFlippedHorizontal(true); leftLeg = new Leg(pX, pY + 18, gameObject.getmLegTextureRegion() .clone(), gameObject); rightLeg = new Leg(pX + 7, pY + 18, gameObject.getmLegTextureRegion() .clone(), gameObject); rightLeg.setFlippedHorizontal(true); gameObject.getmScene().registerTouchArea(chest); gameObject.getmScene().attachChild(chest); gameObject.getmScene().registerTouchArea(head); gameObject.getmScene().attachChild(head); gameObject.getmScene().registerTouchArea(leftHand); gameObject.getmScene().attachChild(leftHand); gameObject.getmScene().registerTouchArea(rightHand); gameObject.getmScene().attachChild(rightHand); gameObject.getmScene().registerTouchArea(leftLeg); gameObject.getmScene().attachChild(leftLeg); gameObject.getmScene().registerTouchArea(rightLeg); gameObject.getmScene().attachChild(rightLeg); // head revolute joint revoluteJointDef = new RevoluteJointDef(); revoluteJointDef.enableLimit = true; revoluteJointDef.initialize(head.getHeadBody(), chest.getChestBody(), chest.getChestBody().getWorldCenter()); revoluteJointDef.localAnchorA.set(0f, 0f); revoluteJointDef.localAnchorB.set(0f, -0.5f); revoluteJointDef.lowerAngle = (float) (0f / (180 / Math.PI)); revoluteJointDef.upperAngle = (float) (0f / (180 / Math.PI)); headRevoluteJoint = (RevoluteJoint) gameObject.getmPhysicsWorld() .createJoint(revoluteJointDef); // // left leg revolute joint revoluteJointDef.initialize(leftLeg.getLegBody(), chest.getChestBody(), chest.getChestBody().getWorldCenter()); revoluteJointDef.localAnchorA.set(0f, 0f); revoluteJointDef.localAnchorB.set(-0.15f, 0.75f); revoluteJointDef.lowerAngle = (float) (0f / (180 / Math.PI)); revoluteJointDef.upperAngle = (float) (0f / (180 / Math.PI)); leftLegRevoluteJoint = (RevoluteJoint) gameObject.getmPhysicsWorld() .createJoint(revoluteJointDef); // right leg revolute joint revoluteJointDef.initialize(rightLeg.getLegBody(), chest.getChestBody(), chest.getChestBody().getWorldCenter()); revoluteJointDef.localAnchorA.set(0f, 0f); revoluteJointDef.localAnchorB.set(0.15f, 0.75f); revoluteJointDef.lowerAngle = (float) (0f / (180 / Math.PI)); revoluteJointDef.upperAngle = (float) (0f / (180 / Math.PI)); rightLegRevoluteJoint = (RevoluteJoint) gameObject.getmPhysicsWorld() .createJoint(revoluteJointDef); // left hand revolute joint revoluteJointDef.initialize(leftHand.getHandBody(), chest.getChestBody(), chest.getChestBody().getWorldCenter()); revoluteJointDef.localAnchorA.set(0f, 0f); revoluteJointDef.localAnchorB.set(-0.25f, 0.1f); revoluteJointDef.lowerAngle = (float) (0f / (180 / Math.PI)); revoluteJointDef.upperAngle = (float) (0f / (180 / Math.PI)); leftHandRevoluteJoint = (RevoluteJoint) gameObject.getmPhysicsWorld() .createJoint(revoluteJointDef); // right hand revolute joint revoluteJointDef.initialize(rightHand.getHandBody(), chest.getChestBody(), chest.getChestBody().getWorldCenter()); revoluteJointDef.localAnchorA.set(0f, 0f); revoluteJointDef.localAnchorB.set(0.25f, 0.1f); revoluteJointDef.lowerAngle = (float) (0f / (180 / Math.PI)); revoluteJointDef.upperAngle = (float) (0f / (180 / Math.PI)); rightHandRevoluteJoint = (RevoluteJoint) gameObject.getmPhysicsWorld() .createJoint(revoluteJointDef);

  Read the article

• Setting Anchor Point

  - by Siddharth

  I want to set anchor point for the sprite like cocos2d has done for their implementation. I do not found any thing like that in andengine so please provide guidance on that. I want to move the sprite on touch so I use following code but that does not work for me. super.setPosition(pX - this.getWidthScaled() / 2, pY - this.getHeightScaled() / 2); Because I touch on the corner of the image but automatically it comes at center of the image because of above code. I want to remain the touch at desire position and drag it. For me the anchor point became useful. But I don't found anything in andengine.

  Read the article

• How to create Executable Jar

  - by Siddharth

  When I try to create a jar file i found the following error, so please someone help me to out of this. Exception in thread "LWJGL Application" com.badlogic.gdx.utils.GdxRuntimeException: Couldn't load file: img/black_ring.png at com.badlogic.gdx.graphics.Pixmap.(Pixmap.java:137) at com.badlogic.gdx.graphics.glutils.FileTextureData.prepare(FileTextureData.java:55) at com.badlogic.gdx.graphics.Texture.load(Texture.java:175) at com.badlogic.gdx.graphics.Texture.create(Texture.java:159) at com.badlogic.gdx.graphics.Texture.(Texture.java:133) at com.badlogic.gdx.graphics.Texture.(Texture.java:122) at com.badlogic.runningball.UserBall.(UserBall.java:19) at com.badlogic.runningball.GameScreen.(GameScreen.java:25) at com.badlogic.runningball.RunningBall.create(RunningBall.java:12) at com.badlogic.gdx.backends.lwjgl.LwjglApplication.mainLoop(LwjglApplication.java:126) at com.badlogic.gdx.backends.lwjgl.LwjglApplication$1.run(LwjglApplication.java:113) Caused by: com.badlogic.gdx.utils.GdxRuntimeException: File not found: img/black_ring.png (Internal) at com.badlogic.gdx.files.FileHandle.read(FileHandle.java:108) at com.badlogic.gdx.files.FileHandle.length(FileHandle.java:364) at com.badlogic.gdx.files.FileHandle.readBytes(FileHandle.java:156) at com.badlogic.gdx.graphics.Pixmap.(Pixmap.java:134) ... 10 more

  Read the article

• Continuous Movement of gun bullet

  - by Siddharth

  I was using box2d for the movement of the body. When I apply gravity (0,0) the bullet continuously move but when I change gravity to the earth the behavior was changed. I also try to apply continuous force to the bullet body but the behavior was not so good. So please provide any suggestion to continuously move bullet body in earth gravity. currentVelocity = bulletBody.getLinearVelocity(); if (currentVelocity.len() < speed|| currentVelocity.len() > speed + 0.25f) { velocityChange = Math.abs(speed - currentVelocity.len()); currentVelocity.set(currentVelocity.x* velocityChange, currentVelocity.y*velocityChange); bulletBody.applyLinearImpulse(currentVelocity,bulletBody.getWorldCenter()); } I apply above code for the continuous velocity of the body. And also I did not able to find any setGravityScale method in the library.

  Read the article

• Break the object body

  - by Siddharth

  In my game, I want to break the object body creating slicing effect. After research I found that I have to use ray casting but I don't know how to use it. If some one know how to break the physics body then please provide information to me. EDIT : I don't have any logic how to do that in andengine. Only I have some link to do slicing http://www.emanueleferonato.com/2012/03/05/breaking-objects-with-box2d-the-realistic-way/ Yes I have to slice physics body into two parts. My physics body have 2d objects.

  Read the article

• Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)

  - by Siddharth

  My mysql installation was screwed up. I uninstalled and installed it multiple times. But I kept getting a hang or a error "cant connect". I now finally have it running with sudo -u mysql mysqld. How do I get mysqld to run at startup, and why do I need to run it as user mysql. Can I change it to run as root ? Edit Filesystem Size Used Avail Use% Mounted on /dev/sda1 230G 5.5G 213G 3% / none 2.0G 268K 2.0G 1% /dev none 2.0G 3.2M 2.0G 1% /dev/shm none 2.0G 92K 2.0G 1% /var/run none 2.0G 0 2.0G 0% /var/lock none 2.0G 0 2.0G 0% /lib/init/rw /dev/sda5 230G 20G 199G 9% /home

  Read the article

• How do I increase moving speed of body?

  - by Siddharth

  How to move ball speedily on the screen using box2d in libGDX? package com.badlogic.box2ddemo; import com.badlogic.gdx.ApplicationListener; import com.badlogic.gdx.Gdx; import com.badlogic.gdx.graphics.GL10; import com.badlogic.gdx.graphics.Texture; import com.badlogic.gdx.graphics.g2d.Sprite; import com.badlogic.gdx.graphics.g2d.SpriteBatch; import com.badlogic.gdx.graphics.g2d.TextureRegion; import com.badlogic.gdx.math.Matrix4; import com.badlogic.gdx.math.Vector2; import com.badlogic.gdx.physics.box2d.Body; import com.badlogic.gdx.physics.box2d.BodyDef; import com.badlogic.gdx.physics.box2d.BodyDef.BodyType; import com.badlogic.gdx.physics.box2d.Box2DDebugRenderer; import com.badlogic.gdx.physics.box2d.CircleShape; import com.badlogic.gdx.physics.box2d.Fixture; import com.badlogic.gdx.physics.box2d.FixtureDef; import com.badlogic.gdx.physics.box2d.PolygonShape; import com.badlogic.gdx.physics.box2d.World; public class Box2DDemo implements ApplicationListener { private SpriteBatch batch; private TextureRegion texture; private World world; private Body groundDownBody, groundUpBody, groundLeftBody, groundRightBody, ballBody; private BodyDef groundBodyDef1, groundBodyDef2, groundBodyDef3, groundBodyDef4, ballBodyDef; private PolygonShape groundDownPoly, groundUpPoly, groundLeftPoly, groundRightPoly; private CircleShape ballPoly; private Sprite sprite; private FixtureDef fixtureDef; private Vector2 ballPosition; private Box2DDebugRenderer renderer; Vector2 vector2; @Override public void create() { texture = new TextureRegion(new Texture( Gdx.files.internal("img/red_ring.png"))); sprite = new Sprite(texture); sprite.setOrigin(sprite.getWidth() / 2, sprite.getHeight() / 2); batch = new SpriteBatch(); world = new World(new Vector2(0.0f, 0.0f), false); groundBodyDef1 = new BodyDef(); groundBodyDef1.type = BodyType.StaticBody; groundBodyDef1.position.x = 0.0f; groundBodyDef1.position.y = 0.0f; groundDownBody = world.createBody(groundBodyDef1); groundBodyDef2 = new BodyDef(); groundBodyDef2.type = BodyType.StaticBody; groundBodyDef2.position.x = 0f; groundBodyDef2.position.y = Gdx.graphics.getHeight(); groundUpBody = world.createBody(groundBodyDef2); groundBodyDef3 = new BodyDef(); groundBodyDef3.type = BodyType.StaticBody; groundBodyDef3.position.x = 0f; groundBodyDef3.position.y = 0f; groundLeftBody = world.createBody(groundBodyDef3); groundBodyDef4 = new BodyDef(); groundBodyDef4.type = BodyType.StaticBody; groundBodyDef4.position.x = Gdx.graphics.getWidth(); groundBodyDef4.position.y = 0f; groundRightBody = world.createBody(groundBodyDef4); groundDownPoly = new PolygonShape(); groundDownPoly.setAsBox(480.0f, 10f); fixtureDef = new FixtureDef(); fixtureDef.density = 0f; fixtureDef.restitution = 1f; fixtureDef.friction = 0f; fixtureDef.shape = groundDownPoly; fixtureDef.filter.groupIndex = 0; groundDownBody.createFixture(fixtureDef); groundUpPoly = new PolygonShape(); groundUpPoly.setAsBox(480.0f, 10f); fixtureDef = new FixtureDef(); fixtureDef.friction = 0f; fixtureDef.restitution = 0f; fixtureDef.density = 0f; fixtureDef.shape = groundUpPoly; fixtureDef.filter.groupIndex = 0; groundUpBody.createFixture(fixtureDef); groundLeftPoly = new PolygonShape(); groundLeftPoly.setAsBox(10f, 320f); fixtureDef = new FixtureDef(); fixtureDef.friction = 0f; fixtureDef.restitution = 0f; fixtureDef.density = 0f; fixtureDef.shape = groundLeftPoly; fixtureDef.filter.groupIndex = 0; groundLeftBody.createFixture(fixtureDef); groundRightPoly = new PolygonShape(); groundRightPoly.setAsBox(10f, 320f); fixtureDef = new FixtureDef(); fixtureDef.friction = 0f; fixtureDef.restitution = 0f; fixtureDef.density = 0f; fixtureDef.shape = groundRightPoly; fixtureDef.filter.groupIndex = 0; groundRightBody.createFixture(fixtureDef); ballPoly = new CircleShape(); ballPoly.setRadius(16f); fixtureDef = new FixtureDef(); fixtureDef.shape = ballPoly; fixtureDef.density = 1f; fixtureDef.friction = 1f; fixtureDef.restitution = 1f; ballBodyDef = new BodyDef(); ballBodyDef.type = BodyType.DynamicBody; ballBodyDef.position.x = (int) 200; ballBodyDef.position.y = (int) 200; ballBody = world.createBody(ballBodyDef); ballBody.setLinearVelocity(200f, 200f); // ballBody.applyLinearImpulse(new Vector2(250f, 250f), // ballBody.getLocalCenter()); ballBody.createFixture(fixtureDef); renderer = new Box2DDebugRenderer(true, false, false); } @Override public void dispose() { ballPoly.dispose(); groundLeftPoly.dispose(); groundUpPoly.dispose(); groundDownPoly.dispose(); groundRightPoly.dispose(); world.destroyBody(ballBody); world.dispose(); } @Override public void pause() { } @Override public void render() { world.step(1f/30f, 3, 3); Gdx.gl.glClearColor(1f, 1f, 1f, 1f); Gdx.gl.glClear(GL10.GL_COLOR_BUFFER_BIT); batch.begin(); vector2 = ballBody.getLinearVelocity(); System.out.println("X=" + vector2.x + " Y=" + vector2.y); ballPosition = ballBody.getPosition(); renderer.render(world,batch.getProjectionMatrix()); // int preX = (int) (vector2.x / Math.abs(vector2.x)); // int preY = (int) (vector2.y / Math.abs(vector2.y)); // // if (Math.abs(vector2.x) == 0.0f) // ballBody1.setLinearVelocity(1.4142137f, vector2.y); // else if (Math.abs(vector2.x) < 1.4142137f) // ballBody1.setLinearVelocity(preX * 5, vector2.y); // // if (Math.abs(vector2.y) == 0.0f) // ballBody1.setLinearVelocity(vector2.x, 1.4142137f); // else if (Math.abs(vector2.y) < 1.4142137f) // ballBody1.setLinearVelocity(vector2.x, preY * 5); batch.draw(sprite, (ballPosition.x - (texture.getRegionWidth() / 2)), (ballPosition.y - (texture.getRegionHeight() / 2))); batch.end(); } @Override public void resize(int arg0, int arg1) { } @Override public void resume() { } } I implement above code but I can not achieve higher moving speed of the ball

  Read the article

• Reloading Resources on Resume

  - by Siddharth

  I'm having a problem with my game. If I press the "Home button" the game is paused... everythings fine, but if I then go back to the game all the resources are reloaded before I can continue the game. And it takes quite a bit. Is this normal, or is there a way to avoid the reloading? I have write following code in onResume and onPause method. It loads same texture again and again on resume of game. @Override protected void onPause() { super.onPause(); if (Utility.flagSound && mScene != null) { if (mScene.getUserData().equals(Constants.GAME_SCENE)) Utility.isPlayLevelMusic = false; else Utility.isPlayLevelMusic = true; audioManager.gameBgMusic.pause(); audioManager.levelBgMusic.pause(); } if (this.mEngine != null && this.mEngine.isRunning()) { this.mEngine.stop(); } } @Override protected void onResume() { super.onResume(); if (audioManager != null && Utility.flagSound && dataManager != null) { if (Utility.flagSound) { if (Utility.isPlayLevelMusic) audioManager.levelBgMusic.play(); else audioManager.gameBgMusic.play(); } } if (this.mEngine != null && !this.mEngine.isRunning()) { this.mEngine.start(); } } I would be glad if anybody could help...

  Read the article

• Remove gravity from single body

  - by Siddharth

  I have multiple bodies in my game world in andengine. All the bodies affected by gravity but in that I want my specific body does not affected by the gravity. For that solution after research I found that I have to use body.setGravityScale(0) method for my problem solution. But in my andengine extension I don't found that method so please provide guidance about how get access about that method. Also for the above problem any other guidance will be acceptable. Thank You! I apply following code for reverse gravity final Vector2 vec = new Vector2(0, -SensorManager.GRAVITY_EARTH * bulletBody.getMass()); bulletBody.applyForce(vec, bulletBody.getWorldCenter());

  Read the article

1 2 3 4  | Next Page >