-
as seen on Server Fault
- Search for 'Server Fault'
I have a GA MA785GT UD3H motherboard with Windows Server 2008 R2 installed on a RAID1 using the on-board RAID controller.
I have now installed a RocketRaid 2680 controller and set up a RAID5 for all my data to be stored on.
Unfortunately I now cannot boot from the RAID1 anymore, the PC is trying…
>>> More
-
as seen on Server Fault
- Search for 'Server Fault'
My motherboard, an Asus M4a79t Deluxe, advertises RAID 0/1/5 capabilities. My limited understanding is that onboard RAID is better than software RAID. Is this necessarily true? Is an onboard RAID controller closer in performance to a software controller or a dedicated hardware controller?
>>> More
-
as seen on Super User
- Search for 'Super User'
Is using mdadm's RAID-1 of 2 partitions (one on laptop's internal HDD, one on external HDD) a good idea.
I want the system to work as RAID-1 if both drives are present, work as regular volume (degradad RAID-1) if external HDD is unplugged and quickly resync when I plug external HDD again.
Questions:
Is…
>>> More
-
as seen on Stack Overflow
- Search for 'Stack Overflow'
When using the SQLIO benchmark tool on a 4-core Dell server with 6 15k 450GB (fast) drives, RAID 0, we found the max throughput was 2MB per second. But when configured as RAID 5, we get 30 MB per second.
It seems that the RAID controller, Dell Perc 5i integrated controller, is maxing out the…
>>> More
-
as seen on Server Fault
- Search for 'Server Fault'
I have Dell Poweredge server 2600 with Raid 5 in 3 hard drive Scsi 36gb each, it was fail to boot sinc the third drive is offline.
I attached Sata card adapter to Sata hard drive and install OS SERVER 2003 to it, downloaded drivers for Raid and everything goes fine when I use recovery data software…
>>> More
-
as seen on Ask Ubuntu
- Search for 'Ask Ubuntu'
Ever since 10.04, I can't print to an HP laserjet p3005.
I'm even using an entirely different computer now with a fresh install
of 10.10. I've tried with and without the latest hplip.
Recently, sometimes I can get it to print a few things, but eventually it always fails
(usually when printing a…
>>> More
-
as seen on Ask Ubuntu
- Search for 'Ask Ubuntu'
Ever since 10.04, I can't print to an HP laserjet p3005.
I'm even using an entirely different computer now with a fresh install
of 10.10. I've tried with and without the latest hplip.
Recently, sometimes I can get it to print a few things, but eventually it always fails
(usually when printing a…
>>> More
-
as seen on Super User
- Search for 'Super User'
I have a laptop here, a HP HDX 16 EO1000 with a Blu-Ray drive.
Installed on the machine is a software package called HP MediaSmart, which presumably can play Blu-Ray movies.
However, when inserting a BD disk and starting HP MediaSmart, it comes up with a warning screen and the following message:
…
>>> More
-
as seen on Ask Ubuntu
- Search for 'Ask Ubuntu'
This is my first post, so please let me know if i have inadvertanly broken any rules.
Problem
There seems to be a problem with HPLIP and USB connections in ubuntu 14.04LTS. After upgrading i managed to get the printing to work but today it has broken.
Initial Issue (Solved)
After upgrading to…
>>> More
-
as seen on Server Fault
- Search for 'Server Fault'
After receiving our HP ProLiant DL360 I'd like to integrate the machine into our Munin system and thus enable ProLiant specific information to be exposed via SNMP.
I'm running Debian Lenny with kernel 2.6.26-2-vserver-amd64 . I've followed http://downloads.linux.hp.com/SDR/getting_started.html and…
>>> More
