Linux driver for Intel ICH10R

Posted by Pablo Santa Cruz on Server Fault See other posts from Server Fault or by Pablo Santa Cruz
Published on 2009-09-10T15:59:48Z Indexed on 2010/03/22 19:21 UTC
Read the original article Hit count: 534

Filed under:

raid

|

hardware-raid

|

drivers

Hi!

I would like to know what 64-bit Linux distribution can I use with an Intel ICH10R RAID. I have tried CentOS 5.2 and Ubuntu Server 8.04. Neither support that raid controller.

Also, I would like to know where do I setup the RAID-5 I want to use. I am using a TYAN S7002 motherboard and the BIOS software does not include an option to configure the RAID as I am used to do with Dell servers...

Thanks a lot in advance.

© Server Fault or respective owner

Related posts about raid

Booting from integrated RAID controller when another RAID controller is installed in a PCIe slot

as seen on Server Fault - Search for 'Server Fault'
I have a GA MA785GT UD3H motherboard with Windows Server 2008 R2 installed on a RAID1 using the on-board RAID controller. I have now installed a RocketRaid 2680 controller and set up a RAID5 for all my data to be stored on. Unfortunately I now cannot boot from the RAID1 anymore, the PC is trying… >>> More
Onboard RAID vs Software RAID

as seen on Server Fault - Search for 'Server Fault'
My motherboard, an Asus M4a79t Deluxe, advertises RAID 0/1/5 capabilities. My limited understanding is that onboard RAID is better than software RAID. Is this necessarily true? Is an onboard RAID controller closer in performance to a software controller or a dedicated hardware controller? >>> More
RAID-1 and regular drive removal (using RAID-1 as a backup measure)

as seen on Super User - Search for 'Super User'
Is using mdadm's RAID-1 of 2 partitions (one on laptop's internal HDD, one on external HDD) a good idea. I want the system to work as RAID-1 if both drives are present, work as regular volume (degradad RAID-1) if external HDD is unplugged and quickly resync when I plug external HDD again. Questions: Is… >>> More
Explain difference in SQLIO numbers for RAID 0 versus RAID 5 over 6 disks

as seen on Stack Overflow - Search for 'Stack Overflow'
When using the SQLIO benchmark tool on a 4-core Dell server with 6 15k 450GB (fast) drives, RAID 0, we found the max throughput was 2MB per second. But when configured as RAID 5, we get 30 MB per second. It seems that the RAID controller, Dell Perc 5i integrated controller, is maxing out the… >>> More
RAID 5 RECONSTRUCT with RAID Reconstructor

as seen on Server Fault - Search for 'Server Fault'
I have Dell Poweredge server 2600 with Raid 5 in 3 hard drive Scsi 36gb each, it was fail to boot sinc the third drive is offline. I attached Sata card adapter to Sata hard drive and install OS SERVER 2003 to it, downloaded drivers for Raid and everything goes fine when I use recovery data software… >>> More

Related posts about hardware-raid

Hardware Raid Card Reviews with SSDs

as seen on Super User - Search for 'Super User'
Yes I realize there are several questions about this but none of them seem to have the answer I'm looking for. I have two SSDs and am looking to buy a purely hardware raid card for them; however, I can't seem to find any reviews that have specifically tested hardware raid cards with SSDs rather than… >>> More
Well supported Hardware Raid Controller

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
Hello alltogether I am currently planning to buy a hardware-raid controller. This became necessary since I am running Linux and Windows in parallel and now need the redundancy for both OS (Im am going to use RAID1 / Mirroring). Therefore I am searching for a hardware raid controller which is well… >>> More
Recommended motherboard with hardware raid for Linux

as seen on Server Fault - Search for 'Server Fault'
Hi. We want to setup an internal office server for testing jobs (LAMP), email and samba. Only about 5-10 users. We are also considering starting to virtualize, initially by a base Ubuntu Server with Xen or VMWare Open Source server. Our current system runs with a Linux Raid which has worked great… >>> More
Hardware RAID Controller Support for SSD TRIM

as seen on Server Fault - Search for 'Server Fault'
Do any hardware RAID controllers available today support TRIM? If not, do any manufacturers have target dates for supporting TRIM? Should I even care about TRIM for SSDs installed in performance-sensitive workstations? Before you suggest it, yes software RAID would sidestep the issue, but my requirements… >>> More
Ubuntu: Monitor hardware RAID and notify upon failure?

as seen on Server Fault - Search for 'Server Fault'
I am using the 3ware 9650SE-2LP Raid controller for a 2-drive RAID 1 setup in some new Ubuntu 10.04 x64 servers. Is there a way for the server to send me a notification when one of the drives fails? I would prefer an e-mail if possible. Thanks. >>> More