Posted
by wildchild
on Server Fault
See other posts from Server Fault
or by wildchild
Published on 2010-05-20T11:17:08Z
Indexed on
2010/05/20
11:20 UTC
Read the original article
Hit count: 205
Hello all,
I have a querry ..Is there any backup strategies for array configurations for Clariion,cellera,centera ..and for symmetrix as well.
Any help in this regard will be greatly appreciated.
Thanks.
© Server Fault or respective owner
as seen on Server Fault
- Search for 'Server Fault'
Hi there,
We have a cluster running with 3 VSpere ESX4 server that all are connected to a lefthand san through iSCSI. This all worked well but a week ago there was a problem with the san. After fixing that problem the VMWARE server continued working but this weekend I saw that 1 server didn't have…
>>> More
as seen on Server Fault
- Search for 'Server Fault'
I'm afraid I don't know much about SAN's so please forgive my lack of detail or technical terms.
As a developer I've just completed and put on an existing production system a new application but it would appear to have tipped the scales regarding the performance of the backups being taken from the…
>>> More
as seen on Server Fault
- Search for 'Server Fault'
Hello,
I currently have 2 cPanel web servers that are little 1RU dual cpu quad core xeons. They have a lot of resources for processing and handling web requests, and never exceed more than 10% cpu usage. They also have plenty of RAM.
The problem is though that they both have RAID 1 160Gb SAS hard…
>>> More
as seen on Server Fault
- Search for 'Server Fault'
We have a poor man's SAN setup in a 1U Ubuntu server running iSCSI-Target with two 300GB drives in RAID-0. We then are using it for block level storage for virtual machines. The hypervisor is connected to the SAN via gigabit on a dedicated VLAN and interfaces.
We only have a single virtual machine…
>>> More
as seen on Server Fault
- Search for 'Server Fault'
I have 2 identical servers:
-48GB Ram
-8GigE NIC's
-2FC NIC's
-2x72GB RAID1 Hard Drives
-Server 2008R2 Host
I also Have a Fibre Channel SAN:
-16x146GB RAID10 Hard Drives
-2xDual-port FC Controllers (Controller A and B both have ports 1 and 2)
-Server 1 has Fiber to Ports A1 and B1
-Server 2 has Fiber…
>>> More
as seen on Oracle Blogs
- Search for 'Oracle Blogs'
Oracle Storage Implementation Boot Camp: ZFS Storage Appliance and Flash
Thursday
20th September 9.30 – 16.30
…
>>> More
as seen on Server Fault
- Search for 'Server Fault'
Recently I've designed and configured a 4 node cluster for a webapp that does lots of file handling. The cluster have been broken down into 2 main roles, webserver and storage. Each role is replicated to a second server using drbd in active/passive mode. The webserver does a NFS mount of the data…
>>> More
as seen on Super User
- Search for 'Super User'
Trying to migrate data from C: to D: via the SBS console is failing.
The wizard starts running but drops out in the first few seconds.
I'll post the full logs, but the important lines appear to be as follows:
An exception of type 'Type: System.IO.FileNotFoundException, mscorlib,
Version=2…
>>> More
as seen on Server Fault
- Search for 'Server Fault'
I have Replicated Gluster Storage which is used by Auto scaling Servers. Both, Auto scaling and Storage are allocated in two Availability zones.
Gluster:
Number of Bricks: 4 x 2 = 8
Transport-type: tcp
Bricks:
Brick1: gluster01:/storage/1a # Zone A
Brick2: gluster02:/storage/1b # Zone B
Brick3:…
>>> More
as seen on Server Fault
- Search for 'Server Fault'
Hello, I am looking at buying three servers, and trying to figure out which storage solution makes the most sense in terms of performance and cost.
Total budget is around: $10,000.
OPTION 1: Dell servers with RAID 10 (4 Drives) each 7200RPM SAS 500GB, for a total capacity of 1TB. Each server is…
>>> More
