Why can't add a hot spare in freebsd? Can anybody help me fix it?

Posted by hamlet on Server Fault See other posts from Server Fault or by hamlet
Published on 2011-06-27T07:20:07Z Indexed on 2011/06/27 8:24 UTC
Read the original article Hit count: 297

Filed under:

raid

|

freebsd

|

raid1

|

hot-spare

Why can't add a hot spare? Can anybody help me fix it?

mfiutil add e1:s1 mfid0

mfiutil: Drive 1 is not available

My mfi status::

mfiutil show config

mfi0 Configuration: 1 arrays, 1 volumes, 0 spares

array 0 of 2 drives:
    drive 0 (  137G) ONLINE <HITACHI HUS153014VLS300 A410 serial=JFWHSB4C>

SAS enclosure 1, slot 0

    drive 1 (  137G) ONLINE <HITACHI HUS153014VLS300 A410 serial=JFWJ3AEC>

SAS enclosure 1, slot 1

volume mfid0 (136G) RAID-1 64K OPTIMAL spans:
    array 0

mfiutil show events

1468 (boot + 25s/BATTERY/WARN) - Battery removed

1475 (boot + 52s/DRIVE/WARN) - PD 00(e1/s0) is not a certified drive

1478 (boot + 52s/DRIVE/WARN) - PD 01(e1/s1) is not a certified drive

1480 (boot + 64s/BATTERY/WARN) - BBU disabled; changing WB virtual disks to WT

mfiutil show volumes

mfi0 Volumes: Id Size Level Stripe State Cache Name

mfid0 ( 136G) RAID-1 64K OPTIMAL Disabled

© Server Fault or respective owner

Related posts about raid

Booting from integrated RAID controller when another RAID controller is installed in a PCIe slot

as seen on Server Fault - Search for 'Server Fault'
I have a GA MA785GT UD3H motherboard with Windows Server 2008 R2 installed on a RAID1 using the on-board RAID controller. I have now installed a RocketRaid 2680 controller and set up a RAID5 for all my data to be stored on. Unfortunately I now cannot boot from the RAID1 anymore, the PC is trying… >>> More
Onboard RAID vs Software RAID

as seen on Server Fault - Search for 'Server Fault'
My motherboard, an Asus M4a79t Deluxe, advertises RAID 0/1/5 capabilities. My limited understanding is that onboard RAID is better than software RAID. Is this necessarily true? Is an onboard RAID controller closer in performance to a software controller or a dedicated hardware controller? >>> More
RAID-1 and regular drive removal (using RAID-1 as a backup measure)

as seen on Super User - Search for 'Super User'
Is using mdadm's RAID-1 of 2 partitions (one on laptop's internal HDD, one on external HDD) a good idea. I want the system to work as RAID-1 if both drives are present, work as regular volume (degradad RAID-1) if external HDD is unplugged and quickly resync when I plug external HDD again. Questions: Is… >>> More
Explain difference in SQLIO numbers for RAID 0 versus RAID 5 over 6 disks

as seen on Stack Overflow - Search for 'Stack Overflow'
When using the SQLIO benchmark tool on a 4-core Dell server with 6 15k 450GB (fast) drives, RAID 0, we found the max throughput was 2MB per second. But when configured as RAID 5, we get 30 MB per second. It seems that the RAID controller, Dell Perc 5i integrated controller, is maxing out the… >>> More
RAID 5 RECONSTRUCT with RAID Reconstructor

as seen on Server Fault - Search for 'Server Fault'
I have Dell Poweredge server 2600 with Raid 5 in 3 hard drive Scsi 36gb each, it was fail to boot sinc the third drive is offline. I attached Sata card adapter to Sata hard drive and install OS SERVER 2003 to it, downloaded drivers for Raid and everything goes fine when I use recovery data software… >>> More

Related posts about freebsd

FreeBSD performance tuning. Sysctls, loader.conf, kernel

as seen on Server Fault - Search for 'Server Fault'
I wanted to share knowledge of tuning FreeBSD via sysctl.conf/loader.conf/KENCONF. It was initially based on Igor Sysoev's (author of nginx) presentation about FreeBSD tuning up to 100,000-200,000 active connections. Tunings are for FreeBSD-CURRENT. Since 7.2 amd64 some of them are tuned well by… >>> More
Boot FreeBSD/FreeNAS (their bootloader) from isolinux?

as seen on Super User - Search for 'Super User'
I'm creating a multiboot cd but have trouble with the FreeNAS/FreeBSD boot loader. If the image has isolinux, its just basically to copy & paste their config, but with the FreeBSD loader its different. Can someone please help me with this one? :) Thanks! >>> More
FreeBSD 8 Kernel Configuration Error Using the VESA Option

as seen on Server Fault - Search for 'Server Fault'
I'm trying to reconfigure FreeBSD 8 (amd64) to allow for a high resolution terminal by following these instructions. The problem is that when I add the two lines: options VESA options SC_PIXEL_MODE and try to build: make buildkernel KERNCONF=VESAKERN I get the following error: /usr/src/sys/amd64/conf/VESAKERN:… >>> More
Ierrs on Network Interface - Pfsense/Freebsd

as seen on Server Fault - Search for 'Server Fault'
Hello all, We're using PfSense as an internal router/firewall (no connection to WAN). Using the Web-GUI, under Status --- Interfaces, there's one particular interface where I have some errors: In/out errors 3513/0 I then SSHed to the firewall to validate the info provided by the WebGUI and… >>> More
Mounting a share with spaces in FreeBSD fstab

as seen on Server Fault - Search for 'Server Fault'
I'm trying to mount a smb network share in fstab on FreeBSD, which works fine for a share without spaces, but fails if a space is in the name. I have replaced the space with \040 which is what everything on google has said, but that didn't help. Share name I'm trying to mount is "Data Backups". Share… >>> More