Daily Archives

Articles indexed Monday September 3 2012

Page 1/16 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • route lan traffic through wirless mifi

    - by Randall Blake
    I have a Windows 7 laptop accessing the internet through Verizon wireless MIFI configured as 192.168.1.1. It supports only 5 wireless connections, so I don't want to use up connections unnecessarily. That laptop has an ethernet nic which I have given a static IP of 192.168.0.5. Everything else on the 192.168.0.0 network acquires an address via DHCP from a DLink router whose address is 192.168.0.1. Also on that network are a printer, some network cameras, and a linux pc. The linux pc does not have a wireless card (and I don't want to buy one). The linux pc is located at 192.168.0.122. I can ping the linux pc from the windows pc. But I cannot access the internet from the linux pc. I can ping everything on the 192.168.0.0 network EXCEPT the ethernet card in the Windows PC. It seems as though my DLink router will not route requests to the 192.168.0.5 nic on the windows pc. My windows pc has a default route pointing to the 192.168.1.0 network. It also has a route telling it to route all traffic destined for the 192.168.0.0 network through the 192.168.0.5 interface. I have tried adding a default route to the linux pc to "gateway" 192.168.0.5, but that does not work. I have also tried adding a default route to the linux pc to the gateway 192.168.0.1 (the DLink router) but that will not give me internet access either (over the 192.168.1.0 network). I tried these two different routes at different times - I did not set them both at the same time. I suppose this is a simple problem to solve, but I cannot seem to solve it. How can I give internet access over the 192.168.1.1 MIFI to my linux pc on 192.168.0.122? Thanks EDIT: Additional Info Internet | | MIFI (192.168.1.1) (wireless) | | (192.168.1.3) (wireless) Windows 7 PC Dlink Router (192.168.0.1) ------------ (192.168.0.5) (wired) | | |linux pc (192.168.0.122) (wired) | |printer (192.168.0.100) (wireless) | |network cameras, etc (192.168.0.103) (wireless) Only the windows pc is multi-homed with a wireless nic that connects to the MIFI wirelessly, and an ethernet nic with a wired connection to the DLink router. (The DLink permits both wired and wireless connections.) I don't want to use Windows internet connection sharing because I believe it will set up the ethernet nic as a gateway on 192.168.0.1 and a DHCP server. I already have the Dlink performing that role and I don't want to change that if I do not have to. (The Dlink permits me to make DHCP reservations and I really like that feature. I don't want to lose it.)

    Read the article

  • Can no longer deploy to Amazon AWS using VS 2010

    - by KevinDeus
    Did something change on Amazon recently? I'm trying to redeploy to my Amazon instance, and the "Publish to Amazon Cloudformation" plugin for VS 2010 no longer appears to update my instance. It tells me that upload is successful, but my instance does not appear to be updating on Amazon I've tried disabling all my instances and using the tool to create a new instance , but no luck. I do see that the URL of the deployed application (which looks like this: http://c2-107-20-11-27.compute-1.amazonaws.com) does not appear to match up with the public IP of my instance on Amazon. (even when it creates a new one) This seems to indicate that something might be broken. any clues? (btw, whenever the Amazon VS2010 Plugin creates a new instance, I am sure to reconnect my elastic IP with the new instance)

    Read the article

  • Must partprobe before using drive?

    - by Jeff Welling
    This is a followup question to Cannot mount /dev/sdc1 on Debian 5.0, special device /dev/sdc1 doesn't exist Basically, I have 6 SATA hard drives in a machine and I'm trying to create a RAID6 array with them. When I try to run the mdadm command to create (with the verbose option) a raid array, I see messages like "mdadm: super1.x cannot open /dev/sdf1: No such device or address" which are resolved by doing partprobe /dev/sdf and then re-running the mdadm command. The problem is that I have to run partprobe after each reboot, and from experience I don't think this is normal behaviour -- on no other linux machine do I have to partprobe the device before I can use it. Something must be going wrong, but how do I troubleshoot this to find out what? Could this be caused by a hardware problem? Edit: Additional note - before I seemed to only have this problem with one drive, but now I'm having it with 3 drives.

    Read the article

  • DNS server redirect users on first visit

    - by Sihan Zheng
    I am looking for a DNS level solution, that redirects a user to a specific IP on the first visit, than directs them to the correct IP on subsequent visits. So the idea is, for example, if a user visits "malicioussite.com", the first time they try to resolve that DNS name, it resolves to the IP of an internal web server, showing them a warning. On subsequent resolves, the users would get the actual IP, so they can visit the site. How can this be achieved? I am really flexible on what I can use, as long as its on the DNS level.

    Read the article

  • I am trying to set up a ubuntu sever 12.04 on my machine [migrated]

    - by Jseb
    I am trying to set up a server on my home network which will eventually host rails. I am not great in linux server and i try to follow the prompt. I did succesfully get to a black screen which then prompts me to a username then password to then do anything ( assuming). However here what i try to do I kinda fellow his tutorial http://www.ubuntugeek.com/step-by-step-ubuntu-11-04-natty-lamp-server-setup.html but however the command where not 100% like him not in same order but same idea. Then i want to install ubuntu server with gui here the command i try with sudo apt-get upgrade sudo apt-get install ubuntu-desktop Which however give me the following error Err http... inRelease w Failed to fetch ht... So been ignored if i try the desktop one i get E: unable to locate package ubuntu E: unable to locate package desktop So i am assuming i am not connected to the internet, so i try the following command sudo vi /etc/network/interfaces here the output it gives me and i know my gateway on my laptop is 192.168.1.1 address: 192.168.1.148 netmask: 255.255.255.0 network: 192.168.1.0 broadcasts: 192.168.1.255 gateway: 192.168.1.1 Btw i do not know the command to get out of vi and saving it. Err http://us.archive.ubuntu.com precises InRelease Err http://us.archive.ubuntu.com precises-updates InRelease Err http://us.archive.ubuntu.com precises-backports InRelease Reading package lists... Done W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise/InRelease W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise-updates/InRelease W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise-backport/InRelease

    Read the article

  • Free space on Dedi' in CentOS

    - by Trance84
    It will sound stupid but i need to figure out how much disk space i have in my dedicated server, it runs CentOS6...the last command i issued was this [[email protected] ~]# df -h Filesystem Size Used Avail Use% Mounted on rootfs 9.7G 6.4G 2.9G 69% / /dev/root 9.7G 6.4G 2.9G 69% / none 1000M 288K 1000M 1% /dev /dev/sda2 914G 200M 868G 1% /home But again, stupid as it may sound... i cant figure out how much space i have in "/" folder (root) And is it possible that "/usr" have a different space (partition)?

    Read the article

  • Rails + Nginx + Unicorn multiple apps

    - by Mikhail Nikalyukin
    I get the server where is currently installed two apps and i need to add another one, here is my configs. nginx.conf user www-data www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Disable unknown domains ## server { listen 80 default; server_name _; return 444; } ## # Virtual Host Configs ## include /home/ruby/apps/*/shared/config/nginx.conf; } unicorn.rb deploy_to = "/home/ruby/apps/staging.domain.com" rails_root = "#{deploy_to}/current" pid_file = "#{deploy_to}/shared/pids/unicorn.pid" socket_file= "#{deploy_to}/shared/sockets/.sock" log_file = "#{rails_root}/log/unicorn.log" err_log = "#{rails_root}/log/unicorn_error.log" old_pid = pid_file + '.oldbin' timeout 30 worker_processes 10 # ????? ???? ? ??????????? ?? ????????, ???????? ??????? ? ??????? ???? ???? listen socket_file, :backlog => 1024 pid pid_file stderr_path err_log stdout_path log_file preload_app true GC.copy_on_write_friendly = true if GC.respond_to?(:copy_on_write_friendly=) before_exec do |server| ENV["BUNDLE_GEMFILE"] = "#{rails_root}/Gemfile" end before_fork do |server, worker| defined?(ActiveRecord::Base) and ActiveRecord::Base.connection.disconnect! if File.exists?(old_pid) && server.pid != old_pid begin Process.kill("QUIT", File.read(old_pid).to_i) rescue Errno::ENOENT, Errno::ESRCH end end end after_fork do |server, worker| defined?(ActiveRecord::Base) and ActiveRecord::Base.establish_connection end Also im added capistrano to the project deploy.rb # encoding: utf-8 require 'capistrano/ext/multistage' require 'rvm/capistrano' require 'bundler/capistrano' set :stages, %w(staging production) set :default_stage, "staging" default_run_options[:pty] = true ssh_options[:paranoid] = false ssh_options[:forward_agent] = true set :scm, "git" set :user, "ruby" set :runner, "ruby" set :use_sudo, false set :deploy_via, :remote_cache set :rvm_ruby_string, '1.9.2' # Create uploads directory and link task :configure, :roles => :app do run "cp #{shared_path}/config/database.yml #{release_path}/config/database.yml" # run "ln -s #{shared_path}/db/sphinx #{release_path}/db/sphinx" # run "ln -s #{shared_path}/config/unicorn.rb #{release_path}/config/unicorn.rb" end namespace :deploy do task :restart do run "if [ -f #{unicorn_pid} ] && [ -e /proc/$(cat #{unicorn_pid}) ]; then kill -s USR2 `cat #{unicorn_pid}`; else cd #{deploy_to}/current && bundle exec unicorn_rails -c #{unicorn_conf} -E #{rails_env} -D; fi" end task :start do run "cd #{deploy_to}/current && bundle exec unicorn_rails -c #{unicorn_conf} -E #{rails_env} -D" end task :stop do run "if [ -f #{unicorn_pid} ] && [ -e /proc/$(cat #{unicorn_pid}) ]; then kill -QUIT `cat #{unicorn_pid}`; fi" end end before 'deploy:finalize_update', 'configure' after "deploy:update", "deploy:migrate", "deploy:cleanup" require './config/boot' nginx.conf in app shared path upstream staging_whotracker { server unix:/home/ruby/apps/staging.whotracker.com/shared/sockets/.sock; } server { listen 209.105.242.45; server_name beta.whotracker.com; rewrite ^/(.*) http://www.beta.whotracker.com/$1 permanent; } server { listen 209.105.242.45; server_name www.beta.hotracker.com; root /home/ruby/apps/staging.whotracker.com/current/public; location ~ ^/sitemaps/ { root /home/ruby/apps/staging.whotracker.com/current/system; if (!-f $request_filename) { break; } if (-f $request_filename) { expires -1; break; } } # cache static files :P location ~ ^/(images|javascripts|stylesheets)/ { root /home/ruby/apps/staging.whotracker.com/current/public; if ($query_string ~* "^[0-9a-zA-Z]{40}$") { expires max; break; } if (!-f $request_filename) { break; } } if ( -f /home/ruby/apps/staging.whotracker.com/shared/offline ) { return 503; } location /blog { index index.php index.html index.htm; try_files $uri $uri/ /blog/index.php?q=$uri; } location ~ \.php$ { try_files $uri =404; include /etc/nginx/fastcgi_params; fastcgi_pass unix:/var/run/php-fastcgi/php-fastcgi.socket; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } location / { proxy_set_header HTTP_REFERER $http_referer; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_max_temp_file_size 0; # If the file exists as a static file serve it directly without # running all the other rewite tests on it if (-f $request_filename) { break; } if (!-f $request_filename) { proxy_pass http://staging_whotracker; break; } } error_page 502 =503 @maintenance; error_page 500 504 /500.html; error_page 503 @maintenance; location @maintenance { rewrite ^(.*)$ /503.html break; } } unicorn.log executing ["/home/ruby/apps/staging.whotracker.com/shared/bundle/ruby/1.9.1/bin/unicorn_rails", "-c", "/home/ruby/apps/staging.whotracker.com/current/config/unicorn.rb", "-E", "staging", "-D", {5=>#<Kgio::UNIXServer:/home/ruby/apps/staging.whotracker.com/shared/sockets/.sock>}] (in /home/ruby/apps/staging.whotracker.com/releases/20120517114413) I, [2012-05-17T06:43:48.111717 #14636] INFO -- : inherited addr=/home/ruby/apps/staging.whotracker.com/shared/sockets/.sock fd=5 I, [2012-05-17T06:43:48.111938 #14636] INFO -- : Refreshing Gem list worker=0 ready ... master process ready ... reaped #<Process::Status: pid 2590 exit 0> worker=6 ... master complete Deploy goes successfully, but when i try to access beta.whotracker.com or ip-address i get SERVER NOT FOUND error, while others app works great. Nothing shows up in error logs. Can you please point me where is my fault?

    Read the article

  • Understanding NFS4 (Linux server)

    - by drumfire
    I've been a bit bothered by NFS4 on Linux. Some information 'out there' seems to conflict with other information, and other information appears hard to find. So here are a couple of things that caught my attention, hopefully someone out there can shed some light on this. This question focuses exclusively on NFS4 without Kerberos etc. 1. Exports There is ambiguous information in the exports manpage on the structure of /etc/exports. To quote from exports(5): Also, each line may have one or more specifications for default options after the path name, in the form of a dash ("-") followed by an option list. The option list is used for all subsequent exports on that line only. What does "subsequent exports on that line only" mean? 1.2 fsid=0 not required anymore? I was searching for fsid when I found a comment on the linux-nfs list stating fsid=0 is not required anymore. Now I'm just confused, do I need it with nfs4 or not?! 2. Non-exported directory still mountable Say I have the following tree: /exp /exp/users /exp/distr /exp/distr/archlinux /exp/distr/debian And I have the following entries in this fstab entry: /dev/disk/by-label/users /mnt/users ext4 defaults 0 0 /dev/disk/by-label/distr /mnt/distr ext4 defaults 0 0 /mnt/users /exp/users none bind 0 0 /mnt/distr /exp/distr none bind 0 0 And my exports is exactly this: /exp 192.168.1.0/24(fsid=0,rw,async,no_subtree_check,no_root_squash) /exp/distr 192.168.1.0/24(rw,async,no_subtree_check,no_root_squash) And exportfs -arv shows: exporting 192.168.1.0/24:/exp/distr exporting 192.168.1.0/24:/exp Then why am I able to do this and get no error on a client: mount -t nfs4 server:/exp/users /tmp/test Even though /exp/users is not exported? I didn't export this directory, and while I don't see the contents of /dev/disk/by-label/users unless I specify crossmnt, I am still able to write to the directory. Everything I write to there goes to the underlying directory of /exp/users which can be seen when I umount /exp/users; ls /exp/users.. 3. The odd case of showmount -d server As stated by rpc.mountd(8), this command should display directories that are either currently mounted by clients, or stale entries in /var/lib/nfs/rmtab, as can be read: The rpc.mountd daemon registers every successful MNT request by adding an entry to the /var/lib/nfs/rmtab file. When receivng a UMNT request from an NFS client, rpc.mountd simply removes the matching entry from /var/lib/nfs/rmtab, as long as the access control list for that export allows that sender to access the export. (...) Note, however, that there is little to guarantee that the contents of /var/lib/nfs/rmtab are accurate. A client may continue accessing an export even after invoking UMNT. If the client reboots without sending a UMNT request, stale entries remain for that client in /var/lib/nfs/rmtab. After reading this I surely wonder: Isn't it terribly insecure to just expose this type of client information; Aren't unaware server admins bound to have an rmtab with a lot of stale clients; Is this the reason that clients that mount nfs4 directories with mount -v get to see output like "nothing was mounted" even though something was mounted? I have a lot of other questions regarding nfs4, but I'll keep it at this for the moment.. :)

    Read the article

  • How do I access the web server on my desktop from my laptop?

    - by Steven
    I'm running Apache on my stationary and I would like to access a website through my laptop. This is some of the Apache config: NameVirtualHost 127.0.0.1:80 <VirtualHost 127.0.0.1:80> ServerName mysite.com DocumentRoot I:/wamp/www/mysite/ </VirtualHost> ServerName localhost:80 <Directory /> Options FollowSymLinks AllowOverride all Order deny,allow Deny from all </Directory> On my laptop I've added the following to the HOSTS file: 10.0.0.3 mysite.com But accessing the page through mysite.com is not very successfull. If I enter the IP address directly, I only get a Forbidden message. What do I need to do in order to get this to work? Update I'm runing WAMPSERVER 2.1 (Apache 2.2.17) Apache is up and running I can ping 10.0.0.3 from laptop I'm not able to ping http://mysite.com from laptop IE gives me a 403 Forbidden - The website declined to show this webpage The only log that get's entries when trying to access the website from my laptop, is access.log. access.log 10.0.0.4 - - [13/Jun/2011:10:14:04 +0200] "GET / HTTP/1.1" 403 202 apache_error.log [Mon Jun 13 10:08:16 2011] [error] VirtualHost localhost:0 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results UPDATE 2 My apache config has the following entry: AllowOverride all Order Deny,Allow Deny from all Allow from 127.0.0.1 Could it be that this Allow from is stopping other computers accessing the page?

    Read the article

  • Using IIS7 as a reverse proxy

    - by Jon
    My question is pretty much identical to the question listed but they did not get an answer as they ended up using Linux as the reverse proxy. http://serverfault.com/questions/55309/using-iis7-as-a-reverse-proxy I need to have IIS the main site and linux (Apache) being the proxied site(s). so I have site1.com (IIS7) site2.com (Linux Apache) they have subdomains of sub1.site1.com sub2.site1.com sub3.site2.com I want all traffic to go to site1.com and to say anything that is site2.com should be proxied to linux box on internal network, (believe ARR can do this but not sure how). I can not have it running as Apache doing the proxying as I need IIS exposed directly. any and all advice would be great. EDIT I think this might help me: <rule name="Canonical Host Name" stopProcessing="true"> <match url="(.*)" /> <conditions> <add input="{HTTP_HOST}" negate="true" pattern="^cto\.com$" /> <add input="{HTTP_HOST}" negate="true" pattern="^antoniochagoury\.com$" /> <add input="{HTTP_HOST}" negate="true" pattern="www.antoniochagoury\.com$" /> </conditions> <action type="Redirect" url="http://www.cto20.com/{R:1}" redirectType="Permanent" /> </rule> from: http://www.cto20.com/post/Tips-Tricks-3-URL-Rewriting-Rules-Everyone-Should-Use.aspx I will have a look at this when I have access to the IIS7 box. Thanks

    Read the article

  • Problem with the hosts file in Windows XP

    - by Mee
    I have a computer with Windows XP SP2 with a weird problem. The hosts file doesn't work. No matter what I do, adding or removing entries in the file doesn't make any difference, pinging the added names times out. I tried flushing the DNS cache (using ipconfig /flushdns) but that didn't work, I even tried to restart the DNS client service but that made no difference too. Removing entries also has no effect, I ping the names and I get a reply. Help!!! Edit: Thanks for your answer guys, but the problem is more complicated than this. It seems I'll have to reinstall Windows.

    Read the article

  • Is there any way to stop or pause Windows fake-raid re-synching?

    - by haimg
    I have two physical disks, each one holds two volumes, they are Windows fake-RAID1. E.g.: Disk A: Partition1 Partition2 Disk B: Partition1-Mirror Partition2-Mirror After an unclean reboot, Windows started resynching these as expected. What was not expected, however, is that it started resynching both volumes at the same time. Both disks seek back and forth like crazy, and synching performance is horrible. Question: Is these any option to stop or pause synching of just one volume? I know I can put one of the disks offline, but that will stop synchronization of all volumes on that disk. Note: I have certain reasons why I need to torture myself with Windows RAID. I'm not interested in alternative RAID solutions right now.

    Read the article

  • Ping isn't acting accurate?

    - by Earlz
    I've been trying to diagnose some latency issues with my internet connection. I've been lagging out of online video games and such, which of course could be their server's fault. So, I've been running ping some. It doesn't indicate anything unusual, but it does act a bit strange. I can start it with something like ping internethost -i 0.1 so that it will send a ton of packets, and every 10-20 seconds it will appear to just freeze for 2 or 3 seconds. The packets are still being received in the right order though, and there is no packet loss. The weirdest thing is that after the little freeze up, it will usually just report a ping time that is about 10-30ms higher than the average. How does this happen? Is ping still being accurate? I'm using Arch Linux. The host I'm pinging is my website, which shouldn't be doing any kind of ping slowing or filtering.

    Read the article

  • Remote login/access on windows

    - by acidzombie24
    Hi I was wondering what software I can use to access my and other machines remotely? I used ssh which is nice but i don't know how it would be like on windows. (I assume its the same idea but windows console instead of a bash terminal?) Windows has a lot of applications that require GUI/MouseClicks. Actually I don't know a single ssh or vpn command line installer not that i'm complaining (but is helpful if you can mention some). I haven't use a VPN, is this taking control of a users screen/session? Or is it another instance/session as if you logged in as a different user on that box? What solutions are at my disposal for windows? (7)

    Read the article

  • Which is the most independent and secure email service? [closed]

    - by Rafal
    I'm looking for a provider with a secure transfer protocol (like https) Secured (as much as it is possible) from being hacked or spied on. One that won't scan my email in order to display more accurate ads. One that won't sell my personal information. One that won't disclose my emails to some sort of government (it probably must be based outside of US or Chinese jurisdiction I reckon) Encrypted if possible. It can be simple and without huge storage. If you know/use any similar service I would be really grateful if you could point me there. Cheerz

    Read the article

  • Hard drive failure during a move

    - by user52141
    So, odd situation here... I shipped a computer via UPS. The computer was well protected, wrapped in multiple layers of padding and tightly packed to minimize any chance of damage. The package arrived in great condition, no damage to the box at all - it looks like it was handled with utmost care. (And given it was shipped 2nd day express and cost $200 to ship, it had better have been) However, upon unpacking it and turning it on... suddenly the computer is telling us there is no boot device. I've checked everything I can think of and everything points to complete and utter hard drive failure. So - what on earth could cause hard drive failure during shipping?

    Read the article

  • Why did numbered list stop working after I hit Enter?

    - by Michael Leach
    I have a numbered list like: 1.0 Excel 2010 1.1 Introduction to Excel 2010 1.1.A. A general overview of Excel 2010, geared towards beginners 1.1.B. There are 3 videos in this series I put the cursor at the end of the last line on 1.1.B and hit Enter. The next line should begin with 1.1.C but nothing appears when the cursor returns to the next line. Another example, if I put the cursor at the end of 1.1.A and hit enter, I should get a new 1.1.B and the original 1.1.B should be renamed to 1.1.C. After hitting enter, a new 1.1.B doesn't appear and the previous 1.1.B drops all the way to the next page. So the next bullet number that should come up doesn't come up. I tried Microsoft Fix It to reset the Registry and that didn't work either. This is very frustrating. Does anybody know how to fix this?

    Read the article

  • Pysdm has disabled my ability to write to my storage partition

    - by Atlas
    I have a dual boot setup with Windows 7 and Mint 13 Cinnamon. As well as their respective partitions I also have a large one (NTFS) for storing all my music, videos, documents etc. I downloaded pysdm as I was told it would enable me to configure Linux to auto-mount my storage partition. It has indeed been helpful in auto-mounting my storage. However, since installing it I can no longer write to the partition which makes 500GB of my hard drive utterly useless! I've tried to unselect the "Mount file system in read only mode" option, but the program keeps re-checking it after I close that window (and even when I click apply). Why is it doing this and how can I get it to recognise that I need to read AND write on that partition?

    Read the article

  • Combining two operators in Evil-mode Emacs

    - by Dyslexic Tangent
    In vim I've remapped > and < when in visual mode to >gv and <gv respectively, like so: vnoremap > >gv vnoremap < <gv Since my target for this question are folks experienced with emacs and not vim, what > and < do is indent/dedent visually selected text. What gv does is reselect the previously selected text. These maps cause > and < to indent/dedent and then reselect the previously selected text. I'm trying out emacs with evil-mode and I'd like to do the same, but I'm having some difficulty figuring out how, exactly, to accomplish the automatic reselection. It looks like I need to somehow call evil-shift-right and evil-visual-restore sequentially, but I don't know how to create a map that will do both, so I tried creating my own function which would call both sequentially and map that instead, but it didn't work, possibly due to the fact that both of them are defined, not as functions with defun but instead as operators with evil-define-operator. I tried creating my own operators: (evil-define-operator shift-left-reselect (beg end) (evil-shift-left beg end) (evil-visual-restore)) (evil-define-operator shift-right-reselect (beg end) (evil-shift-right beg end) (evil-visual-restore)) but that doesn't restore visual as expected. A stab in the dark gave me this: (evil-define-operator shift-left-reselect (beg end) (evil-shift-left beg end) ('evil-visual-restore)) (evil-define-operator shift-right-reselect (beg end) (evil-shift-right beg end) ('evil-visual-restore)) but that selects one additional line whenever it is supposed to reselect. For now I've been using the following, which only has the problem where it reselects an additional line in the < operator. (evil-define-operator shift-right-reselect (beg end) (evil-shift-right beg end) (evil-visual-make-selection beg end)) (evil-define-operator shift-left-reselect (beg end) (evil-shift-left beg end) (evil-visual-make-selection beg end)) and I've mapped them: (define-key evil-visual-state-map ">" 'shift-right-reselect) (define-key evil-visual-state-map "<" 'shift-left-reselect) any help / pointers / tips would be greatly appreciated. Thanks in advance.

    Read the article

  • Is it possible to make a persistent USB serial port regardless ofthe existence of the USB device?

    - by Keith Nicholas
    USB serial ports, especially devices which emulate serial ports, don't quite behave the same as old serial ports, which causes a few problems with some software. old serial ports, always existed, they never come and go out of existence. With USB devices that emulate serial ports, they come and go depending on whether they are powered / reset etc. Is there a way under windows to make the USB serial port permanently exist regardless of the presence of the device? (not just come back as the same name as it was before).

    Read the article

  • refile a table row in emacs org mode

    - by justinhj
    I have a template for org-capture more that looks like: ("w" "Websites" table-line (file+olp "~/Dropbox/mystuff.org" "Websites" "To view") "| %c | %^{Description}") which adds a table line to a table of web pages I want to view when I do org-capture and press 'w'. This works just fine. The I wanted to refile the To View table line to a table with the headline "Viewed" using this (setq org-refile-targets '(("mystuff.org" :regexp . "Viewed") But what org mode does is takes the whole table rather than the url on the row I want to refile, and puts the To View table under the Viewed table. Obviously not what I want. Is there a way to do what I want?

    Read the article

  • Internet not working on a VirtualBox Linux machine

    - by mtahmed
    I installed VirtualBox on a Windows 7 PC and installed Xubuntu (Ubuntu with XFCE) on it. Now on the Windows, I am connected to the internet through a LAN which automatically authenticates to connect to the network(because its my work computer). I have also installed the guest additions on this virtual machine (Xubuntu). I tried both NAT and bridging to set up internet connection but I still cannot connect to the internet. For NAT: The browser doesn't say website not found but it keeps trying to load it forever and the network status monitor (the one provided by VirtualBox) doesn't show any green light (no incoming packets). For Bridging: Same as for NAT but the network status monitor shows incoming packets and outgoing packets. But internet still doesn't work. I tried a lot of different things but none worked.

    Read the article

  • Outlook Calendar Error "The attachment size exceeds the allowable limit", even when there is no attachment

    - by Laura Kane-Punyon
    I have an outlook meeting series that occurs weekly. Every week, I open the current occurrence, attach the current week’s meeting materials and send an update to the invites. I have done this for the same meeting series for several years. Recently, I started to run into a problem where every time I try to update or cancel a meeting occurrence I received the error “the attachment size exceeds the allowable limit” regardless of whether or not I have an attachment. I am not even able to cancel the series in order to start fresh. I have 2 questions regarding this issue: Is there any way to send attachments on the occurrence of a meeting invite without running into this issue? Is there any way to remove this meeting series?

    Read the article

  • My hard drive seems to be overheating... what should I do?

    - by George Edison
    After a cold boot, the hard drive in my notebook jumps to 56? within an hour or so of idling. Is 56? a cause for alarm? Notes: The notebook is on a flat desk and none of the vents are obstructed. The video card is currently at 55? and the CPU at 50?. It's a Western Digital 250GB hard drive. SMART reports the drive healthy but does warn that: Edit: this problem had a very surprise ending. I inverted the notebook and unscrewed some of the panels on the back (there was one covering the hard drive, and one that provided access to the memory). I couldn't see any dust, so I simply screwed everything back together and powered it on... and it worked! The temperature is now staying at 46?, and it feels notable cooler to the touch. So I can only assume that some internal fan was malfunctioning or something. Whatever the case, it's working now so I won't complain. Edit: I have an SSD now, so temperature isn't as big an issue as it was when I had a mechanical drive.

    Read the article

  • Not playing .mov files in WMP, not loading .mov files in Windows Live Movie Maker. What am I missing?

    - by royatl
    My friend needs to create a video and she has some source files that are .MOV format. I assume they are h.264. She can view the files with QuickTime. She has a laptop running Vista, and a just-downloaded version of Windows Live Movie Maker (which I'll call LMM for short). LMM shows an 'X' icon when she tries to add one of these files to it. My machine runs Windows 7 Pro, and a slightly earlier build of LMM and has no problems editing video with these source files. I assume she's missing a codec but what can I tell her? I've looked at the answer that mentions a QuickTime DirectShow Source Filter Plugin. It mentions only playback through WMP, not editing via LMM, but is that what she needs? I didn't have to load anything like that. That project's now done (she punted and used iMovie on a Mac). But I did gain another clue. She could play a 720p .MOV file, but these were 1920x1080 files.

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >