Daily Archives

Articles indexed Saturday October 26 2013

Page 1/15 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Indian government department have more unsecure website then others.

  - by Anirudha

  Originally posted on: http://geekswithblogs.net/anirugu/archive/2013/10/26/indian-government-department-have-more-unsecure-website-then-others.aspxOne of my friend share his college experience with me. He is not related with computer science. One day he told me that Ankia Fadia come to their college. In front of many student he show how to hack BSNL website by tricks. he break the flow how BSNL site work. I have told them BSNL is one of the most unsecure website of India   If you logged-in to website maybe it’s run in few seconds but sometime it run in 58 minute. OK this is not grammar mistake 58 minute is less then 1 hour. This means open a tab and put the link to open. it will open in hours. If you are using IE8, Chrome and Firefox you will be forced to use IE7 or downgrade. I simply use Ie7 mode in IE for make it work. This happen because they use something that is called DynaTrace. This site is most unsecure. now guess how !   Suppose my username is xyz and password is abc. How I can reset the password I simply go to website and in their site when I do reset my password he told me to fill password and password will not worked here.you can use here password here to reset my password. Remember that username are different then broadband username and password. Suppose if I want to reset your password I simply need to know your broadband username and I can reset it myself. I just logged in with my username and when I open the page for reset password I can fill your bb username and password will work here. I have not tried this. the broadband username can easily guess. this is depend on same way how people’s broandband username made. IS this Safe ? Nope, There are many thing on the site which make me feel that is 1900 century website. They still lived in popup life.  These site are nothing but a crap. not work most of time and when work it’s run too slowly.

  Read the article

• Python error after installing libboost-all-dev on debian [migrated]

  - by Cameron Metzke

  A friend of mine wanted the liboost libraries installed on our shared computer so after installing libboost-all-dev 1.49.0.1 ( A debian wheezy machine ), I get this error when using the "pydoc modules" command on the commandline. It spits out the following error -- root@debian:/usr/include/c++/4.7# pydoc modules Please wait a moment while I gather a list of all available modules... **[debian:49065] [[INVALID],INVALID] ORTE_ERROR_LOG: A system-required executable either could not be found or was not executable by this user in file ../../../../../../orte/mca/ess/singleton/ess_singleton_module.c at line 357 [debian:49065] [[INVALID],INVALID] ORTE_ERROR_LOG: A system-required executable either could not be found or was not executable by this user in file ../../../../../../orte/mca/ess/singleton/ess_singleton_module.c at line 230 [debian:49065] [[INVALID],INVALID] ORTE_ERROR_LOG: A system-required executable either could not be found or was not executable by this user in file ../../../orte/runtime/orte_init.c at line 132 -------------------------------------------------------------------------- It looks like orte_init failed for some reason; your parallel process is likely to abort. There are many reasons that a parallel process can fail during orte_init; some of which are due to configuration or environment problems. This failure appears to be an internal failure; here's some additional information (which may only be relevant to an Open MPI developer): orte_ess_set_name failed --> Returned value A system-required executable either could not be found or was not executable by this user (-127) instead of ORTE_SUCCESS -------------------------------------------------------------------------- -------------------------------------------------------------------------- It looks like MPI_INIT failed for some reason; your parallel process is likely to abort. There are many reasons that a parallel process can fail during MPI_INIT; some of which are due to configuration or environment problems. This failure appears to be an internal failure; here's some additional information (which may only be relevant to an Open MPI developer): ompi_mpi_init: orte_init failed --> Returned "A system-required executable either could not be found or was not executable by this user" (-127) instead of "Success" (0) -------------------------------------------------------------------------- *** The MPI_Init() function was called before MPI_INIT was invoked. *** This is disallowed by the MPI standard. *** Your MPI job will now abort. [debian:49065] Abort before MPI_INIT completed successfully; not able to guarantee that all other processes were killed!** root@debian:/usr/include/c++/4.7# I tried looking into the problem and ended up uninstalling the following to get it to work again. openmpi common all 1.4.5-1 libibverbs-dev amd64 1.1.6-1 libopenmpi-dev amd64 1.4.5-1 mpi-default-dev amd64 1.0.1 libboost-mpi-python1.49.0 although pydoc works again, I'm assuming the packages I removed are gunna hurt somethiong else down the track ? As you guessed im not a c/c++ programmer. So I guess my question is, will this hurt something later ? is their a way to install those packages without hurting python ?

  Read the article

• How to load the environment variables at boot time before X11 on Ubuntu Precise?

  - by Fnux

  Using Ubuntu Precise 64 bit, I'm facing a problem that I'm unable to solve and that I'll try to describe below: I'm using a console mode program (let's say abc) that uses Go, NodeJS, Java and Scala. In order for abc to work with these languages, I've to declare the following statements: a) within /etc/environment: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" CLASSPATH=$CLASSPATH:/usr/share/java/scala-library.jar b) within /etc/login.defs ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin ENV_PATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin c) a) within /etc/sudoers: `# env_reset Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin"` Then, when I start abc from a terminal, all is fine and I can use any of the 4 languages described above. However, if I put a script within /etc/init.d that starts abc during the boot process (i.e. before to start the GUI), using Java from abc still is fine, but using Go, NodeJS or Scala doesn't work anymore. Then, I guess that during the boot process, the script within /etc/init.d that starts abc is executed before that the different environment variables set within /etc/sudoers, /etc/environment and /etc/login.defs are loaded. So, my question is: how to force the environment variables to be loaded before that my script starting abc is launched? Any help and advice on this topic would be trully appreciated. TIA. Cheers. Thanks again to Mark and Danila. Below is the current "abc" script file that I put within /etc/init.d `#! /bin/sh ### EDIT: ADD THIS VARS DEFINITIONS: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" CLASSPATH=$CLASSPATH:/usr/share/java/scala-library.jar "ENV_SUPATH PATH"="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" "ENV_PATH PATH"="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" "Defaults secure_path"="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" ##### EXPORT this VARS so they are accessible to children:" export "PATH" "CLASSPATH" "ENV_SUPATH PATH" "ENV_PATH PATH" "Defaults secure_path" `### BEGIN INIT INFO `# Provides: abc `# Required-Start: $remote_fs $syslog `# Required-Stop: $remote_fs $syslog `# Default-Start: 2 3 4 5 `# Default-Stop: 0 1 6 `# Short-Description: abc initscript `# Description: This iniscript starts and stops abc `### END INIT INFO `# Author: Fnux, fnux.fl at gmail dot com `# Version: 1.2 `# Note: (edit ABC_PATH if abc isn't installed in /opt/abc) NAME=abc ABC_PATH=/opt/abc START="-d" STOP="-k" VERSION="-v" SCRIPTNAME=/etc/init.d/$NAME STARTMESG="\nStarting abc in deamon mode." UPMESG="\n$NAME is running." DOWNMESG="\n$NAME is not running." STATUS=`pidof $NAME` `# Exit if abc is not installed [ -x "$ABC_PATH/$NAME" ] || exit 0 case "$1" in start) echo $STARTMESG cd $ABC_PATH ./$NAME $START ;; stop) cd $ABC_PATH ./$NAME $STOP ;; status) if [ "$STATUS" > 0 ] ; then echo $UPMESG else echo $DOWNMESG fi ;; restart) cd $ABC_PATH ./$NAME $STOP echo $STARTMESG ./$NAME $START ;; version) cd $ABC_PATH ./$NAME $VERSION ;; *) echo "Usage: $SCRIPTNAME {start|status|restart|stop|version}" >&2 exit 3 ;; esac : So, where and how should I write the needed environment variables for: a) Go needs the following statements (ie: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin ENV_PATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin `# env_reset Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin") b) and Scala needs this one: (ie CLASSPATH=$CLASSPATH:/usr/share/java/scala-library.jar). TIA for an explanation how to do so. Cheers.

  Read the article

• Hiera can't find puppet environment

  - by quickshiftin

  I'm testing out hiera and hitting a snag on the hierarchy configuration. What I have is extremely simple, the part that isn't working is specification of hiera datadir files based on environment. Here's the config file (/etc/hiera.yaml) I'm trying --- :backends: - yaml :logger: console :hierarchy: - "%{::environment}" :yaml: :datadir: /var/lib/hiera Now, I have a file /var/lib/hiera/development.yaml blah: meh When I run hiera it's not finding the file or the value $ hiera -d blah DEBUG: Fri Oct 25 15:50:52 -0600 2013: Hiera YAML backend starting DEBUG: Fri Oct 25 15:50:52 -0600 2013: Looking up blah in YAML backend nil I've verified this agent is configured for development $ sudo puppet agent --configprint environment development Now let me prove hiera is capable of finding something; a change to the hiera.yaml file: :hierarchy: - development And now hiera finds the file and the value $ hiera -d blah DEBUG: Fri Oct 25 15:53:25 -0600 2013: Hiera YAML backend starting DEBUG: Fri Oct 25 15:53:25 -0600 2013: Looking up blah in YAML backend DEBUG: Fri Oct 25 15:53:25 -0600 2013: Looking for data source development DEBUG: Fri Oct 25 15:53:25 -0600 2013: Found blah in development meh So why isn't it working with the dynamic environment configuration? I got that straight from the documentation. Note, I have tried running the hiera command via sudo with no change in the result.

  Read the article

• Can not change to a static IP in Fedora 19

  - by user196272

  Im having a bit of a weird situation. Ive installed Fedora Linux 19 onto a virtual machine with no GUI. initially eth0 does not show up when I perform ifconfig. when I run dmesg | grep eth I see the adapter but it says it changed names to p2p1. Once I perform the ifconfig p2p1 up command it shows up. Now when I try to edit the /etc/sysconfig/network-scripts/ifcfg-p2p1, it does not exist. the only scripts that are there lo and enp0s3. If I try to create the ifcfg-p2p1 file with the correct settings, I can not restart the network service. I tried editing the enp0s3 file, but that did not work. Im fairly new to linux and not sure what else to put in here, so if you need any more information just let me know and Ill put it in here.

  Read the article

• Configuring apache and php to handle many connections

  - by Marc

  My preliminary setup is like this. Two QuadCore 8GB servers running debian 6, with php and apache, One QuadCore 16GB server running debian 6, with mysql My plan is to have one 8Gb server to act as a proxy server, using vertx java to handle connections. I will let vertx use HttpClient to send web requests to the second 8GB server. This would have apache installed and use php to deliver any information that it gets from the mysql server on the third, 16GB server. The main reason I want this setup is to have things separated, so the "proxy" will be the only way to access the system, as the other two server will only be reachable from the local network. I can have the vertx proxy handle 5000+ concurrent connections, but, I don't know how to configure apache to handle all the requests coming from the proxy. Php will connect over mysqli with persistent connection pool of 500-800 connections, the mysql server seems not to have any issues on this part. In previous projects, the apache part was always causing issues, no matter how I set it up. I might not fully understand how to setup apache, since normally apache should handle many concurrent connections, but it does seem to now.

  Read the article

• DDR3 10600 memory running at 533mhz

  - by Elger

  I bought a second hand hp dl160 g6 a year ago with 48GB configured in it. I discovered checking with cpu-z and doublechecked with speccy the memory runs at only 533Mhz. I checked the configuration with the HP memory configurator and the banks are populated correctly for max performance. There are 12 banks populated with micron and hynix memory of 4gb, all capable of running 1333mhz. What could me wrong here? C:\Users\Administrator>wmic Memorychip get manufacturer, partnumber, speed, seri alnumber, devicelocator, banklabel BankLabel DeviceLocator Manufacturer PartNumber SerialNumber Speed BANK0 PROC 1 DIMM 3A Micron 36JSZF51272PZ1G4F C5DF65D7 1333 BANK1 PROC 1 DIMM 2D Micron 36JSZF51272PY1G4D 951565E0 1333 BANK3 PROC 1 DIMM 6B Micron 36JSZF51272PZ1G4F 3F3160D6 1333 BANK4 PROC 1 DIMM 5E Hyundai HMT151R7BFR4C-H9 E28A3014 1333 BANK6 PROC 1 DIMM 9C Micron 36JSZF51272PZ1G4F 26DF7E1A 1333 BANK7 PROC 1 DIMM 8F Micron 36JSZF51272PZ1G4G 77FC67D7 1333 BANK9 PROC 2 DIMM 3A Hyundai HMT151R7BFR4C-H9 FB763433 1333 BANK10 PROC 2 DIMM 2D Hyundai HMT151R7BFR4C-H9 E18AA014 1333 BANK12 PROC 2 DIMM 6B Hyundai HMT151R7BFR4C-H9 DF8A1014 1333 BANK13 PROC 2 DIMM 5E Hyundai HMT151R7BFR4C-H9 6968511A 1333 BANK15 PROC 2 DIMM 9C Hyundai HMT151R7BFR4C-H9 F28A7014 1333 BANK16 PROC 2 DIMM 8F Micron 36JSZF51272PZ1G4G 76FC67D7 1333

  Read the article

• How to see the olddir after mount --bind olddir newdir?

  - by freestyler

  In my debian 7: $ pwd /home/freestyler $ mkdir old new # mount --bind old new then $ mount /dev/cciss/c0d0p9 on /home/freestyler/new type ext4(rw,noatime,nodiratime,user_xattr,barrier=1,data=ordered) I can only see the /dev/cciss/c0d0p9, which is not the same as /home/freestyler/old How can I get the original olddir path? In debian 6: the mount outpt the olddir path well: $ mount /home/freestyler/old on /home/freestyler/new type none (rw,bind)

  Read the article

• grep is inconsistently defaulting to grep -P?

  - by Sammitch

  I have a script that does some housekeeping that works perfectly well when invoked from an interactive shell, but did nothing when invoked by cron. To troubleshoot this I started a shell with a 'blank' environment with the command: env -i /bin/bash --noprofile --norc Using this blank env I've dug into my script and found that the following grep will not match any files: grep -il "^ws_status\s*=\s*[\"']remove[\"']$" However, when run from an interactive shell the command will return the filenames of the matching files. As a note, the expression is matching lines like: WS_STATUS = "remove" Through trial-and-error I discovered that adding -P to the options [Perl regex] the command started working normally in the 'blank' shell. However, I have no idea why my login shell appears to be defaulted to grep -P. There is only one grep binary, /bin/grep There are no aliases defined for grep=pgrep or grep="grep -P" There is no env variable GREP_OPTIONS defined. What's the deal here? Note: OS is RHEL v5.10, Bash is v3.2.25, grep is v2.5.1

  Read the article

• How to make Tun module running at linux start

  - by harmony

  i installed Tun using: modprobe tun then did: lsmod | grep tun tun 83840 0 Please how to make Tun running at reboot? This is written on Hamachi website: ...Then add tun to the list of modules by using your favorite text editor and Create /etc/modules-load.d/tun.conf #Load tun module at boot. tun But this folder foes not exist in my /etc Is it wise to add line "modprobe tun" into /etc/rc.local ?

  Read the article

• Exim forwards not going out through TLS

  - by Blake

  I'm trying to get Exim to use STARTTLS to send emails that are just FORWARDS. I have a server accepting email at example-accepting.com for users. So I want [email protected] to forward all email to [email protected]. If I do this from the command like on example-accepting.com... echo "test" | mail -s "ssl/tls test" [email protected] Success!! Sent via TLS BUT, if I send an email to [email protected] the forward fails, it's NOT being sent via TLS. I've tried both forwarding the email via /etc/aliases and the user .forward file. The email is indeed sent, but NOT via TLS. Why is it when I run "mail" from the command like it's working like it should, but a .forward is not using TLS? Thanks

  Read the article

• Optical multicast

  - by Randomblue

  I have a 10G XPF+ optical cable with market updates from a stock exchange. This cable goes into a switch, which then multicasts every packet to a couple of computers. The problem with using a switch for multicast is that there is latency overhead, even with a pass-through switch (~200ns). Are there "optical" solutions (I'm thinking of a beam splitter of some sort) which would allow for close to zero latency 10G multicast?

  Read the article

• Network traffic is not being forwarded from a VM to the network using a bridged interface with Xen + libvirt

  - by foob

  I'm having trouble getting network access from a VM that I'm running using Xen and libvirt. I've been trying different things and reading similar posts online for a couple of days but I'm really stuck at this point. If anybody could offer some insight it would be much appreciated. I have a VM that I'm running on a host with a bridge set up as br0 and an interface eth0 on a 192.168.60.0/24 subnet. The networking portion of the libvirt configuration xml is: <interface type='bridge'> <mac address='ff:a0:d1:e5:07:de'/> <source bridge='br0'/> <script path='/etc/xen/scripts/vif-bridge'/> <model type='virtio' /> </interface> When I start the VM a vif6.0 interface is created on the host and the ifconfig output is: br0 Link encap:Ethernet HWaddr 00:A0:D1:C3:07:DE inet addr:192.168.60.33 Bcast:192.168.60.255 Mask:255.255.255.0 inet6 addr: fe80::2a0:d1ff:fee5:7de/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13 errors:0 dropped:0 overruns:0 frame:0 TX packets:40 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3570 (3.4 KiB) TX bytes:3508 (3.4 KiB) eth0 Link encap:Ethernet HWaddr 00:A0:D1:C3:07:DE inet6 addr: fe80::2a0:d1ff:fee5:7de/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:492 (492.0 b) Interrupt:19 Memory:fe8f0000-fe900000 vif6.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:80 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:6660 (6.5 KiB) TX bytes:468 (468.0 b) virbr0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) The 'brctl show' output seems to show the bridge being configured correctly: br0 8000.00a0d1e507de no eth0 vif6.0 The ifcfg-eth0 contents in the VM are: DEVICE=eth0 BOOTPROTO=static HWADDR=FF:A0:D1:E5:07:DE IPADDR=192.168.60.133 NETMASK=255.255.255.0 ONBOOT=yes and the output of ifconfig in the VM look like what I would expect: eth0 Link encap:Ethernet HWaddr FF:A0:D1:E5:07:DE inet addr:192.168.60.133 Bcast:192.168.60.255 Mask:255.255.255.0 inet6 addr: fe80::fda0:d1ff:fee5:7de/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:80 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:468 (468.0 b) TX bytes:7780 (7.5 KiB) but when I try to ssh or ping another computer I get 'no route to host.' Using tcpdump on the host system I tried to see if I could narrow down where the problem is: # tcpdump -vv -i vif6.0 tcpdump: WARNING: vif6.0: no IPv4 address assigned tcpdump: listening on vif6.0, link-type EN10MB (Ethernet), capture size 96 bytes 14:49:40.833997 arp who-has 192.168.60.35 tell 192.168.60.133 14:49:41.833314 arp who-has 192.168.60.35 tell 192.168.60.133 14:49:42.833309 arp who-has 192.168.60.35 tell 192.168.60.133 So the VM is sending out out an arp who-has packet when I try to ssh to 192.168.60.35. I think that this means the setup within the VM is ok and that this is an issue on the host system. If I run tcpdump with the interface of br0 then I don't see these arp packets. My thought here is that the packets are being blocked before going on to the bridge somehow. I tried adding an iptables rule to resolve this: -A FORWARD -m physdev --physdev-is-bridged -j ACCEPT but it didn't work. I also tried the following: /sbin/sysctl -w net.bridge.bridge-nf-call-ip6tables=0 /sbin/sysctl -w net.bridge.bridge-nf-call-iptables=0 /sbin/sysctl -w net.bridge.bridge-nf-call-arptables=0 /sbin/sysctl -w net.ipv4.ip_forward=1 which had no impact. Is it obvious to somebody who has more experience than me what I'm missing here? Should vif6.0 have the same MAC address is eth0 in the vm? Do I need more rules in my iptables? Thanks for any help!

  Read the article

• Windows 2012/IIS 8 + ASP.NET MVC Applicaiton 403.14 (Forbidden) - The Web server is configured to not list the contents

  - by WiredPrairie

  I have a very simple MVC 4 application I'm trying to deploy to a Windows 2012 server. Inconsistently, when navigating to the root of the web application (http://localhost/app), it returns a 403.14-Forbidden: Detailed Error Information: Module: DirectoryListingModule Notification: ExecuteRequestHandler Handler: StaticFile Error Code: 0x00000000 Requested URL: http://localhost:80/test1/ Physical Path: c:\apps\test1\ Logon Method: Negotiate The web application is: Is a very vanilla VS2012 MVC4 Intranet template -- with only a tweak to a label to prove things were working. runs in an Integrated v4.0 application pool setup to use Windows authentication application pool has a custom AD Identity assigned (so it can gain access to a SQL server) application pool identity has read permissions in the c:\apps\test1 folder in which it is running It's an MVC4 application, targeting .NET 4.0 currently -There's no default document in an MVC4 application (like a default.aspx), as there shouldn't need to be one. I don't want to enable directory listings (as that's not the real error). Installed: Roles / Web Server (IIS) / Appliation Development / (.NET 4.5 Extensibility, Application Initialization, ASP.NET 4.5, ISAP Extensions, ISAPI Filters, WebSocket Protocol) Works locally on my machine in IISExpress on Windows 8 Has configured in web.config: <modules runAllManagedModulesForAllRequests="true" /> is set to precompiled during publish When I change the precompiled option to false, the web application does not fail (in my testing at least, it seems to work consistently). The reason I say it's inconsistent is that I've seen it work, then I've published, and the error returns. I can't find a pattern to the issue (and right now, I haven't been able to get it work again, at all). The 403 is returned from a local or remote web browser. I've had trouble finding a solution that isn't intended for older versions of Windows (like suggestions to reinstall ASP.NET which won't work on Windows 2012). I really don't know what else to try.

  Read the article

• Howo to get Multipath IO with Dell MD3600i into active/active setup?

  - by Disco

  I'm desperately trying to improve performance of my SAN connection. Here's what i have: [root@xnode1 dell]# multipath -ll mpath1 (36d4ae520009bd7cc0000030e4fe8230b) dm-2 DELL,MD36xxi [size=5.5T][features=3 queue_if_no_path pg_init_retries 50][hwhandler=1 rdac][rw] \_ round-robin 0 [prio=200][active] \_ 18:0:0:0 sdb 8:16 [active][ready] \_ 19:0:0:0 sdd 8:48 [active][ghost] \_ 20:0:0:0 sdf 8:80 [active][ghost] \_ 21:0:0:0 sdh 8:112 [active][ready] And multipath.conf : defaults { udev_dir /dev polling_interval 5 prio_callout none rr_min_io 100 max_fds 8192 user_friendly_names yes path_grouping_policy multibus default_features "1 fail_if_no_path" } blacklist { device { vendor "*" product "Universal Xport" } } devices { device { vendor "DELL" product "MD36xxi" path_checker rdac path_selector "round-robin 0" hardware_handler "1 rdac" failback immediate features "2 pg_init_retries 50" no_path_retry 30 rr_min_io 100 prio_callout "/sbin/mpath_prio_rdac /dev/%n" } } And sessions. [root@xnode1 dell]# iscsiadm -m session tcp: [13] 10.0.51.220:3260,1 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c tcp: [14] 10.0.50.221:3260,2 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c tcp: [15] 10.0.51.221:3260,2 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c tcp: [16] 10.0.50.220:3260,1 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c I'm getting very poor read performance : dd if=/dev/mapper/mpath1 of=/dev/null bs=1M count=1000 The SAN is configured as follows: CTRL0,PORT0 : 10.0.50.220 CTRL0,PORT1 : 10.0.50.221 CTRL1,PORT0 : 10.0.51.220 CTRL1,PORT1 : 10.0.51.221 And on the host : IF0 : 10.0.50.1 IF1 : 10.0.51.1 (Dual 10GbE Ethernet Card Intel DA2) It's connected to a 10gbE switch dedicated for SAN traffic. My questions being; why the connection is set up as 'ghost' and not 'ready' like an active/active configuration ?

  Read the article

• How to use cURL to FTPS upload to SecureTransport (hint: SITE AUTH and client certificates)

  - by Seamus Abshere

  I'm trying to connect to SecureTransport 4.5.1 via FTPS using curl compiled with gnutls. You need to use --ftp-alternative-to-user "SITE AUTH" per http://curl.haxx.se/mail/lib-2006-07/0068.html Do you see anything wrong with my client certificates? I try with # mycert.crt -----BEGIN CERTIFICATE----- ... -----END CERTIFICATE----- # mykey.pem -----BEGIN RSA PRIVATE KEY----- ... -----END RSA PRIVATE KEY----- And it says "530 No client certificate presented": myuser@myserver ~ $ curl -v --ftp-ssl --cert mycert.crt --key mykey.pem --ftp-alternative-to-user "SITE AUTH" -T helloworld.txt ftp://ftp.example.com:9876/upload/ * About to connect() to ftp.example.com port 9876 (#0) * Trying 1.2.3.4... connected * Connected to ftp.example.com (1.2.3.4) port 9876 (#0) < 220 msn1 FTP server (SecureTransport 4.5.1) ready. > AUTH SSL < 334 SSLv23/TLSv1 * found 142 certificates in /etc/ssl/certs/ca-certificates.crt > USER anonymous < 331 Password required for anonymous. > PASS [email protected] < 530 Login incorrect. > SITE AUTH < 530 No client certificate presented. * Access denied: 530 * Closing connection #0 curl: (67) Access denied: 530 I also tried with a pk8 version... # openssl pkcs8 -in mykey.pem -topk8 -nocrypt > mykey.pk8 -----BEGIN CERTIFICATE----- ... -----END CERTIFICATE----- ...but got exactly the same result. What's the trick to sending a client certificate to SecureTransport?

  Read the article

• long access times and errors in iis application

  - by user55862

  I am having an issue with an IIS application (details of environment at the end of the message). The web site works great most of the time and I cannot reproduce any error in our test system. On the live system however with on averare of 5-15 requests per second I have a problem with that some requests (about 0.05%) will take over 300 seconds to complete. The other requests complete withing 5-10 seconds. It seem like if all the errornous requests end up with a Timer_EntityBody error in the error log. I have never seen this as an end user but I guess that they will receive some kind of error message. I am trying to find out what can be causing this errornous behaviour. Any ideas are welcome. I have read something about that there can be an MTU issue if ICMP and MTU protocols are blocked in the firewall. Does that sound reasonable? I have also read about updating to IIS 7 should do the trick. Does it sound reasonable? I think that the problem has another cause but I have no idea of what. I have tried running hte perormance monitor, monitoring for database locks and active transaction counts. I can see some of these in the perfmon log for the MSSQL server (another machine) for example: Active transactions is sometimes peaking and sometimes for long periods Lock waits per seconds is sometimes peaking Transactions per second is sometimes peaking Page IO Latch wait is sometimes peaking Lock wait time (ms) is sometimes peaking But I cannot see that any of these correlate to the errors in the IIS error log. On the IIS server machine I can also see with perfmon that some values peak a few times during a day: Request execution time Avg disk queue length I can neither see that any of these correlate to the errors in the IIS error log. In the below code I have anonymized by replacing some parts with HIDDEN The following can be seen in the access log 2010-10-01 08:35:05 W3SVC1301873091 **HIDDEN** POST /**HIDDEN**/Modules/BalanceModule.aspx - 80 - **HIDDEN** Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.1;+.NET+CLR+2.0.50727;+.NET+CLR+3.0.4506.2152;+.NET+CLR+3.5.30729;+.NET4.0C;+.NET4.0E) ASP.NET_SessionId=**HIDDEN** 400 0 64 0 2241 127799 At the same time the following can be seen in the error log: 2010-10-01 08:35:05 **HIDDEN** 1999 **HIDDEN** 80 HTTP/1.0 POST /**HIDDEN**/Modules/BalanceModule.aspx - 1301873091 Timer_EntityBody Test+Pool I can tell the following about the environment: Server: Windows Server 2003 x64 SP2 running on VMWare HTTP Server: IIS v6.0 with ASP.NET 2.0.50727 Antivirus: Trend Micro OfficeScan (Is it a good idea to have this on a server?)

  Read the article

• How to auto-cc a system email account any time a user creates an appointment

  - by Ferdy

  I will not bother explaining my full architecture or reasons for wanting this in order to keep this question short: Is it possible to auto-cc a certain email account any time a Exchange user creates an appointment or meeting in his own calendar? Is it possible using rules? Our Exchange 2007 server is outsourced, I cannot change the configuration or install plugins server-side Preferably, it still should work server-side, because users may use the Outlook client but also Outlook Web Access Is there any other way, perhaps using group policies? My conclusion so far is that the only viable way to accomplish this is to build an Outlook add-on. The problem there is that it will need to be managed for thousands of desktop users and that the add-on will not work when using another client (OWA, mobile). An alternative architecture could be to pull the information from the user's calendar on a scheduled basis. Given that we are talking about a lot of users, scalability is a major issue, this has also been confirmed by Microsoft. Can you confirm that my thinking is correct or do you have any other solutions?

  Read the article

• How to know which block device maps to which physical drive

  - by Karolis T.

  I have a server with software RAID 1, two hot-swap sata disks. One hard drive started showing errors, I'm thinking about removing and replacing it, only problem is that I have no idea which of the two correspond to which devices. And I can't shut the server down to find out. I have /dev/sda and /dev/sdb, /dev/sda is the failing one. Thought about doing something along the lines # mdadm --manage /dev/md0 --remove /dev/sda1 then somehow stop/suspend the drive using tuning software and try to listen which of the two stopped, but that's not gonna work in a noisy server environment. Drive panels have no LEDs. Thanks for any ideas!

  Read the article

• How not to show user name beside each consecutive message

  - by Joce

  After years on GTalk, I recently switched to Pidgin for my IM needs. Almost all is ok with me, though there's on thing that bugs me. It shows the name of the author beside each consecutive message. e.g. joce: Hey joce: Long time no see! joce: How are you? Bob: Hey! Bob: Indeed! Instead of (as it is in GTalk): joce: Hey Long time no see! How are you? bob: Hey! Indeed! Is there a setting that I've missed or a plugin that could do that for me?

  Read the article

• 'rename' on files with apostrophes

  - by nomen

  I'm trying to batch rename some files using the 'rename' utility. Unfortunately, the file names contain apostrophes, and it's messing things up. I'm not sure how to proceed. Here's what I've tried: rename -n '/.*(\d\d).jpg/Foo's Excellent Photo - $1.jpg/' # fails due to end of string rename -n '/.*(\d\d).jpg/Foo\'s Excellent Photo - $1.jpg/' # fails due to end of string rename -n "/.*(\d\d).jpg/Foo's Excellent Photo - $1.jpg/" # fails due to shell expansion Can anybody help?

  Read the article

• Mediawiki extension error

  - by vinylguitar

  I'm running the latest version of mediawiki using MoWeS Portable II from my desktop. I just installed this extension on the wiki http://www.mediawiki.org/wiki/Extension:MsUpload It adds an option to upload files (to be embedded in an article) to the edit screen of an article. After installing it when I try and edit an article I get the following error: Fatal error: Call to undefined method OutputPage::addModules() in C:\Users\User\Desktop\knowledge mapedia 10 25 13 copy\mowes_portable\www\mediawiki\extensions\MsUpload\msupload.php on line 65 Also here is what I posted in the localsettings.php file (I put it in at the end of localsettings.php if it makes a difference): Start --------------------------------------- MsUpload $wgMSU_ShowAutoKat = false; #autocategorisation $wgMSU_CheckedAutoKat = false; #checkbox for autocategorisation checked $wgMSU_debug = false; #debug mode $wgMSU_ImgParams = '400px'; #default max-size for inserted image $wgMSU_UseDragDrop = true; #show drag&drop area require_once "$IP/extensions/MsUpload/msupload.php"; End --------------------------------------- MsUpload require_once "$IP/extensions/msupload/msupload.php"; At line 65 in the localsettings.php file there is the following: line 64 ## Database settings line 65 $wgDBtype = "mysql"; line 66 $wgDBserver = "localhost"; line 67 $wgDBname = "mediawiki"; line 68 $wgDBuser = "root"; line 69 $wgDBpassword = ""; Any idea what I'm doing wrong?

  Read the article

• Restoring the exact state of a linux install to a different laptop with different sized drives and other hardware

  - by user259774

  I have an IBM running a Manjaro install that has already been used and settled into, with packages installed, browser profiles, etc, etc. The drive is 60gb, and it has a swap partition and an ext4 root partition. I need to move this profile to a Toshiba computer with a 320gb drive. How should I go about this? My inclination would be to shut down the toshiba, boot a live linux system, dd the whole 60gb drive to a file, boot the toshiba to a live system, then dd the file to its 320gb drive. Would this work? I know that it wouldn't with windows, but I believe this is an artificially imposed limitation from Microsoft. Is this correct, or is Linux similarly limited? If not, how could I go about this? Would clonezilla work, or would the hardware disparities prevent it from working?

  Read the article

• Ouya Controller on Windows 8 to Emulate a Microsoft 360 Controller

  - by TheCompander

  I thought I'd create a central repository for those looking to get their OUYA controller working in Windows. Currently there is an underlying Windows driver issue causing the left/right triggers to be recognized as Z-Axis and Z-Rotation as well as button presses. The Xbox 360 Controller Emulator is able to connect to the controller but the underlying driver issue causes the emulated Right Trigger to remain HIGH and consequently unusable by games that look for a 360 controller (eg. Batman Arkham Origins [tested today], all buttons work except the Right Trigger). Has anyone made progress in overcoming this issue? if not would anyone know where to start to modify the controller driver to ignore the z-axis? I was intrigued into investigate this out of interest and because there is no purely bluetooth game controller on the market to my knowledge.

  Read the article

• Start Menu Shortcuts resisting reorganisation

  - by seusr

  Running Win7. The Start Menu was getting too big, so I've navigated to C:\ProgramData\Microsoft\Windows\Start Menu\Programs and created some sub-folders in various categories [image editors, system utilities, media players, security for example] in which to group the shortcuts. Having created the group folders, I've dragged and dropped the Start Menu shortcuts into them. However it seems all Start Menu shortcuts are not alike. Some programs, their shortcut folders having been moved from the Start Menu, spawn NEW [but empty] folders bearing their company names in the top level of the Start Menu eg AVICodec Some programs don't have Start Menu shortcut folders that can be seen in WinExplorer [or equiv] at all, even though they turn up under the Start Menu itself. It seems these can be moved where they are visible i.e. in the Start - All Programs by dragging and dropping not just onto the desired folder but by hovering to expand the desired folder and then dropping between other shortcuts there. Eg Daum, Format Factory That's not such a problem, but why it's happening is a mystery. What's going on, and how to make these shortcuts behave normally or otherwise control them properly?

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >