Daily Archives

Articles indexed Thursday October 31 2013

Page 1/18 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Stack , data and address space limits on an Ubuntu server

  - by PaulDaviesC

  I am running an Ubuntu server which has around 5000 users. The users are allowed to SSH in to the system. So in order to cap the memory used up by a process I have capped the address space limits using limits.conf. So my question is , should I be limiting the data and stack ? I feel that is not required since I am capping address space. Are there any pitfalls if I do not cap the stack and data limits?

  Read the article

• Unable to configure DD-WRT SNMP monitoring with Zabbix

  - by Jien Wai

  Installed Zabbix on Ubuntu but not sure what setting I missed. Base on my concept, I would like to using SNMP to monitoring DD-WRT router which it using SNMP service. I did enable to SNMP service at DD-WRT router page. And also created a host at Zabbix with included DD-WRT template. After I done it I still unable to get any connection/information at Zabbix which mean the router doesn't communicate with Zabbix. The above picture is my DD-WRT's SNMP configuration. http://img13.imageshack.us/img13/2228/rhj2.png Also this is the Zabbix configuration which I have created the service to monitoring my DD-WRT router. http://imageshack.us/a/img853/7311/hlpr.png

  Read the article

• install CA root trust certificate in Cent OS

  - by Shyamin Ayesh

  i install SSL certificate in my web site and now i have some questions about it. my web site is working correctly in google chrome web browser but it's not working in firefox browser. one of my friend is say's me the CA Root Trust certificate is not installed in the server. now i need to know how can i confirm the CA Root Trust is not installed and how to install CA Root Trust certificate in Cent OS 6.4 minimal with Apache. my SSL certificate issued AlphaSSL and it's domain validating wildcard certificate CA - G2. thank you very much for prompt reply !

  Read the article

• How can I join a Lubuntu machine to a Windows 2008 domain? [duplicate]

  - by Maria Caba

  This question already has an answer here: How can I have a Linux machine join a Windows Domain? 6 answers I have a Lubuntu machine and I want to join it to a Windows domain. I've read that you need to download extra software to make this work, does anybody have any suggestion??

  Read the article

• TCP/IP Ilustrated 1 second edition [on hold]

  - by user196821

  Well, I want to read and learn about how tcpip works in detail, so I got a copy of the well known book of Richard Stevens. But after a little, I discovered there is a second edition of the book, so I checked it out. But surprisingly, the second edition does not cover some subjects that the first actually does (like telnet, ftp, smtp etc...), so I thought "well I just have to read the misshing chapters on the first edition", but if they removed them in the second, it is for a reason. Is there really a good reason for that?

  Read the article

• order of operations for environment variables

  - by alyda

  I want to understand how environment variables are set and reset (overridden). I'm running Apache/2.2.24 (Unix) PHP/5.4.14 on a mac . My theory is this: Environment vars can be set in bash, then they can be overwritten with httpd.conf preceding a VirtualHost directive that precedes php.ini, which can then be overwritten by .htaccess (if allowable) and finally by PHP I tried the following: setting environment variable in bash: I added export ENVIRONMENT='local' to my ~/.bashrc file, restarted apache and did not get any output from print_r($_ENV); (in a simple index.php file at the root of my webserver). I also tried putting ENVIRONMENT='local' into /etc/environment, and restarting apache, nothing, as well as /etc/bashrc, restart apache. still nothing. setting environment variable in httpd.conf: I added SetEnv ENVIRONMENT 'local-httpd to the end of my /etc/apache2/httpd.conf file (but before I load other conf files, such as virtual host [Include /private/etc/apache2/other/*.conf]). I now see the variable in the array print_r($_SERVER); but not print_r($_ENV);. setting environment variable in httpd-vhosts.conf: I added SetEnv ENVIRONMENT 'local-vhost to my /etc/apache2/extra/httpd-vhosts.conf file in my generic directive that points to my default document root. I now see the variable has been overwritten (to local-vhost from local-httpd, so I know where the variable is getting set). setting environment variable in php.ini: while searching for a proper place to put my environment variable, I noticed that variables_order = "GPCS" was set to the production value rather than EGPCS. I changed it, restarted my server and found that I was now getting output for print_r($_ENV); but not my expected custom variable. It also appears that I am not able to set a custom variable in this file. Please tell me if I am wrong setting environment variable in .htaccess: I added SetEnv ENVIRONMENT 'local-htaccess'. This worked as expected, overwriting all other values that were set. setting / overwriting environment variable in PHP: if (...) { putenv('ENVIRONMENT=local'); } I'm asking this question because I have a lot of local and remote testing servers, some of which may or may not allow me access to modify httpd, httpd-vhost, php.ini or environment variables. I want to understand what is best for those difference scenarios (shared hosting, heroku, local servers, etc) I obviously don't know how to properly set the environment variable in bash in a way that php can use it, I'd like to know how to do that (as I think Heroku does something similar with heroku config set...)

  Read the article

• how to enable remote access to a MySQL server on an AZURE virtual machine

  - by Rees

  I have an AZURE virtual machine with a MySQL server installed on it running ubuntu 13.04. I am trying to remote connect to the MySQL server however get the simple error "Can't connect to MySQL server on {IP}" I have already done the follow: * commented out the bind-address within the /etc/mysql/my.cnf * commented out skip-external-locking within the same my.cnf * "ufw allow mysql" * "iptables -A INPUT -i eth0 -p tcp -m tcp --dport 3306 -j ACCEPT" * setup an AZURE endpoint for mysql * "sudo netstat -lpn | grep 3306" does indeed show mysql LISTENING * "GRANT ALL ON *.* TO remote@'%' IDENTIFIED BY 'password'; * "GRANT ALL ON *.* TO remote@'localhost' IDENTIFIED BY 'password'; * "/etc/init.d/mysql restart" * I can connect via SSH tunneling, but not without it * I have spun up an identical ubuntu 13.04 server on rackspace and SUCCESSFULLY connected using the same procedures outlined here. NONE of the above works on my azure server however. I thought the creation of an endpoint would work, but no luck. Any help please? Is there something I'm missing entirely?

  Read the article

• failover cluster file replication

  - by user156144

  I have a Windows 2008 R2 failover cluster server. I am going to move one of our window services onto this new server. The service writes some trace information to a log file on the local harddrive. This will become a problem when it is moved to cluster server when cluster A become unavailable and cluster B takes over and now there are 2 places where I need to look for log files. Is there a way to make sure regardless of which cluster is on, I get one complete log file? I have been researching this and there is something called DFS replication but i was wondering if there is something better that works with failover cluster... I prefer not having to update my code. I can specify it to write log files to a different location by changing app.config file but no code change...

  Read the article

• Creating mdraid device on top of other existing mdraid devices

  - by Dmitriusan

  I'm considering creating something like "hierarchical raid" and wondering whether it is possible using pure mdraid. Moreover, I'm going to boot from this device. I'm using Ubuntu Server 12.04 LTS with Grub2 bootloader. Motivation behind doing that is: I have 4 x 1tb 7200rpm disks. Two are newer and faster (up to 200mb/sec) and other two are slower (up to 140mb/sec). I want to create RAID-0 device from them. When creating such RAID-0 directly from 4 hard disks, I get summary speed up to ~480mb/sec. That is roughly 4*120mb/sec, so RAID-0 works with speed of the slowest device. I have an idea to create a separate RAID-0 md0 device from 500gb partitions of slower hard disks. Theoretically, this md0 device will have speed 2*140=240~280mb/sec. After that, I'm going to add this md0 device to RAID-0 with faster disks, finishing with up to 3*200=600mb/sec. Stripe-width for this raid will be 2x times bigger than for underlying raid with slow disks. Questions are: is it possible or I'm missing something? will that work as expected? can I boot from such consolidated raid device? any better ideas? any pitfalls? I don't want to use fakeraid for consolidating slow disks for multiple reasons (portability, ability to customize parameters and so on). PS Speed is needed for home virtualization server and just for experience/fun. Reliability is provided via regular automatic backups to a separate device. PPS I considered also using different stripe-width for hard disks with different speed in single raid, but mdraid does not seem to support that.

  Read the article

• ESXi 5.1 ghettoVCB stuck at Clone: 10% done

  - by stormdrain

  Trying to run ghettoVCB for the first time here. I am using a NAS that is set up as a datastore on the host. I did a dry run and it completed without error. The VM is ~500GB and there is only one on the host that I'm trying to backup. I proceeded to start the actual backup: ./ghettoVCB.sh -m vmname -g ghettoVCB.conf It goes though the config and looks like it's taking off: 2013-10-24 11:43:19 -- info: CONFIG - USING GLOBAL GHETTOVCB CONFIGURATION FILE = ghettoVCB.conf 2013-10-24 11:43:19 -- info: CONFIG - VERSION = 2013_01_11_0 2013-10-24 11:43:19 -- info: CONFIG - GHETTOVCB_PID = 17398616 2013-10-24 11:43:19 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/nas2tb-001/esxi4 2013-10-24 11:43:19 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3 2013-10-24 11:43:19 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2013-10-24_11-43-18 2013-10-24 11:43:19 -- info: CONFIG - DISK_BACKUP_FORMAT = thin 2013-10-24 11:43:19 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0 2013-10-24 11:43:19 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0 2013-10-24 11:43:19 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 4 2013-10-24 11:43:19 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5 2013-10-24 11:43:19 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15 2013-10-24 11:43:19 -- info: CONFIG - LOG_LEVEL = info 2013-10-24 11:43:19 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB-2013-10-24_11-43-18-17398616.log 2013-10-24 11:43:19 -- info: CONFIG - ENABLE_COMPRESSION = 0 2013-10-24 11:43:19 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0 2013-10-24 11:43:19 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0 2013-10-24 11:43:19 -- info: CONFIG - ALLOW_VMS_WITH_SNAPSHOTS_TO_BE_BACKEDUP = 0 2013-10-24 11:43:19 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all 2013-10-24 11:43:19 -- info: CONFIG - VM_SHUTDOWN_ORDER = 2013-10-24 11:43:19 -- info: CONFIG - VM_STARTUP_ORDER = 2013-10-24 11:43:19 -- info: CONFIG - EMAIL_LOG = 0 2013-10-24 11:43:19 -- info: 2013-10-24 11:43:22 -- info: Initiate backup for vmname 2013-10-24 11:43:22 -- info: Creating Snapshot "ghettoVCB-snapshot-2013-10-24" for serv2 Destination disk format: VMFS thin-provisioned Cloning disk '/vmfs/volumes/esxi4-storage/vmname/vmname_1.vmdk'... Clone: 10% done. and it's been that way for over an hour now. Stuck at Clone: 10% done.. Thing is: I can see the vmdk on the NAS. And it looks like almost the whole thing is there. On the NAS it's showing ~430GB but on vSphere Client Summary is shows as 507GB. I don't see the vmdk on the NAS growing any more. The logfile mimics some of the above and is sitting at "Creating Snapshot..." and nothing else is coming in. Is the vmdk on the NAS showing all those GB because of the provisioning or something? i.e. is the size of the file not necessarily indicative of the amount of actual data that has been copied? Is there are reason it might be "Stuck" at 10%? i.e. could it really be taking this long? Any other tips? Thanks. Edit: as soon as I hit the Submit button, I glance over to see that it has incremented to 11% done. Good to know it'll be complete sometime around when the sun explodes.

  Read the article

• Connecting to Aerohive APs from Laptops running Win. 7 using authentication from a Windows 2008 domain server

  - by user264116

  I have deployed a wireless network using Aerohive access points. 2 of them are set up as radius servers. I want my users to be able to use the same user name and password they use when they log onto our domain. They are able to do this from android devices or computers running Windows 8. It will not work on Windows 7 machines. How do I remedy this situation, keeping in mind that the machines are personal machines not company owned and I will have no way to change their hardware or software.

  Read the article

• Static IPv6 address in Windows unused for outgoing connections

  - by Luc

  I'm running a Windows server and trying to get it to use a static IPv6 address for outgoing connections to other IPv6 hosts (such as Gmail). I need this because Gmail requires a ptr record, and I can't set one for random addresses. The static address is configured on the host, but it also has a temporary privacy address as well as a random address from the router it seems. By default Windows uses the privacy address; it seems this is the expected behavior (and it makes perfect sense for people/users that did not set a static address, but I did!). I've tried disabling the privacy address with: netsh int ipv6 set privacy disabled This indeed gets rid of the privacy address, but I still have the random address that the router assigned. To disable this, it was said I needed to disable "router discovery" using this command: net interface ipv6 set interface 14 routerdiscovery=disabled Upon doing this, all IPv6 connectivity is lost. If I do this while pinging Gmail, it will report "Destination host unreachable" as soon as I enter the command. In the static IPv6 configuration, I did configure the default gateway and prefix length, so I don't see why it's unable to connect. Probably has something to do with the lack of ARP in IPv6 and somehow being unable to resolve the router's MAC, but I wouldn't know how to fix this. Finally I've tried disabling the DHCPv6 lease with these commands: netsh interface ipv6 set interface "IDMZ Team" managedaddress=disabled netsh interface ipv6 set interface "IDMZ Team" otherstateful=disabled Which was to no avail; the host continues to obtain and use the router-assigned IPv6 address. The router is a FritzBox 7340, which shows me all the IPv4 and IPv6 addresses that the host (identified by MAC) utilizes, but I'm unable to change the assigned address. Maybe this could be done over the telnet interface of the router somehow, but again, I wouldn't know how to do this even if it's the way to go. In short, any of the following would probably solve my problem: Change Windows' source address selection behavior. Have Windows not get an address from the router and not generate a privacy address; Have the router hand out a static address and make Windows use that as source address. Recover connectivity after disabling router discovery on Windows. Alternatively I might use some (batch, perl, ...) script to throw away all IPv6 addresses except the desired one, but this feels rather hacky. If it's the only way (or less hacky than another hacky solution), it might be an option though. Thanks!

  Read the article

• nginx reverse ssl proxy with multiple subdomains

  - by BrianM

  I'm trying to locate a high level configuration example for my current situation. We have a wildcard SSL certificate for multiple subdomains which are on several internal IIS servers. site1.example.com (X.X.X.194) -> IISServer01:8081 site2.example.com (X.X.X.194) -> IISServer01:8082 site3.example.com (X.X.X.194) -> IISServer02:8083 I am looking to handle the incoming SSL traffic through one server entry and then pass on the specific domain to the internal IIS application. It seems I have 2 options: Code a location section for each subdomain (seems messy from the examples I have found) Forward the unencrypted traffic back to the same nginx server configured with different server entries for each subdomain hostname. (At least this appears to be an option). My ultimate goal is to consolidate much of our SSL traffic to go through nginx so we can use HAProxy to load balance servers. Will approach #2 work within nginx if I properly setup the proxy_set_header entries? I envision something along the lines of this within my final config file (using approach #2): server { listen Y.Y.Y.174:443; #Internally routed IP address server_name *.example.com; proxy_pass http://Y.Y.Y.174:8081; } server { listen Y.Y.Y.174:8081; server_name site1.example.com; -- NORMAL CONFIG ENTRIES -- proxy_pass http://IISServer01:8081; } server { listen Y.Y.Y.174:8081; server_name site2.example.com; -- NORMAL CONFIG ENTRIES -- proxy_pass http://IISServer01:8082; } server { listen Y.Y.Y.174:8081; server_name site3.example.com; -- NORMAL CONFIG ENTRIES -- proxy_pass http://IISServer02:8083; } This seems like a way, but I'm not sure if it's the best way. Am I missing a simpler approach to this?

  Read the article

• Sharing two SSL wildcard certificates in memory in nginx

  - by hvtilborg

  I have an nginx server running with two IP addresses, say 1.2.3.4 and 4.3.2.1. Besides there are two wildcard SSL certificates for *.example.net (i.e. wc1, pointing to 1.2.3.4) and *.sub.example.net (i.e. wc2, pointing to 4.3.2.1). The nginx docs mention that you can share a wildcard certificate between server instances like this: ssl_certificate wc1.crt; ssl_certificate_key wc1.key; server { listen 1.2.3.4:443; server_name www.example.net; ssl on; ... } server { listen 1.2.3.4:443; server_name test.example.net; ssl on; ... } However, I was wondering whether this same construct is possible to use with the second wildcard certificate too. Both domains have around 500 subdomains. Do they not get mixed up, since the ssl_certificate construct is now global?

  Read the article

• built in "Offer Remote Assistance" not working because of permissions

  - by Caleb_S

  I'm trying to enable permissions for a user on a Windows7 machine to use the built in feature called "Offer Remote Assistance" or "Windows Remote Assistance". This feature works fine if the user is added to the "domain admins" security group, but for security reasons, I cannot leave him in that group. This is within a SBS2003 Domain. I have added the user and also a group that he is apart of to the Small Business Server Remote Assistance Policy, after following some documentation I was able to find, but this has not worked. Can you tell me how to enable this feature for this user and or a user group? http://content.screencast.com/users/CASEIT/folders/Forum%20Pictures/media/2a518bc9-4184-4520-8b76-cdf46555f568/2011-08-18_1330.png

  Read the article

• How to backup/restore excluding filestream varbinary in SQL Server 2008?

  - by fdierre

  There is an application used in a production site that uses SQL Server 2008 as its DBMS. The database schema uses Filestream Varbinary to save binary data on the filesystem instead of directly into the DB tables. The point is that now and then it would be useful to copy the production database on development machines, mostly for doing troubleshooting. The database is too big for comfortably moving it around, but it would be ok if it could be moved leaving out the filestream varbinary fields. In other words, I am trying to make an "imperfect" copy of a database: i.e., on the destination database, it is ok to have NULL values instead of the varbinary. Is this possible? I tried looking for the feature on the SQL Server Management studio and did a backup that excludes the filegroup containing the filestream varbinary, but I cannot restore: MSSMS complains that the restore cannot be done because the backup is incomplete (of course). Is it possible to achieve what I am trying to do in some way?

  Read the article

• port forwarding on windows server 2008 to Hyper-v machines

  - by This is it

  I have a host machine (win server 2008 R2) with several Hyper-V virtual machines. I want to be able to redirect certain ports of host to virtual machines. There is virtual network connection between host and virtual machines (192.168.10.xxx). Host is also attached to external network (10.10.10.123). Virtual machines have several other networks between them. E.g., I want to be able to redirect traffic from 10.10.10.123 12345 to 192.168.10.321 54321 I tried RRAS in windows server but for it to work Default gateway to 10.10.10.123 has to be set in virtual machines. Virtual machines can not be on external network.

  Read the article

• How to change Excel Pivot table "Report Filter"s values cell formatting

  - by Damiqib

  My Excel is in Finnish, but don't let that bother you... First Report Filter "Kupi" has only number values in my source table, for example 643203, 3533, 253244, etc. How ever in Pivot's "Report Filter" all those values are converted to date values MONTH yyyy. How do I reformat the filter values to respect the original cell formatting?! The same problem is with actual date values in my source table when using "Report Filter" in Pivot table. In my source data my dates are in format: dd.mm.yyyy and for some reason in Pivot's "Report Filter" all dates are shown in MONTH yyyy-format?! Why is that and what do I need to do to fix this?

  Read the article

• Extend my LAN network

  - by user268291

  i have a patch panel and hardwiring already setup in my office. The patch panel is 24-port and all the ports are engaged. All my switch ports are engaged. Now, I have a printer connected to a wall point (RJ45) which I want to shift to a new room where there is no LAN setup. I want to have two RJ45 wall plugs in the new room so that I can connect one RJ45 port to have my LAN in the new room and the other RJ45 wall port I want to use for my printer. There is no option other than LAN (no wireless). Please help me and tell me how do I get the two RJ45 wall plate plugs in the new room up and keep my LAN running. It is a little urgent for me. Please help.

  Read the article

• ffmpeg XDCAM HD vtag profiles

  - by sebastian

  Hey guys sorry for disturbing you again, but these days I have a lot of work to do with ffmpeg. I found on http://code.google.com/p/ffmbc/wiki/XDCAMHD422Encoding vtag settings for XDCAM HD 422 and used them in my script, everything works fine for HD 422, now I am desperately searching for normal HD vtags and have found only one so far was xd3v for Apple XDCAM HD 1080i50 (35 Mb/s VBR) which I don't need because its interlaced. What I need are the vtags for 1080p24, 1080p25 and 1080p30. Here is the script I have found and adapted a bit: ffmpeg -threads "4" -i "$2" -pix_fmt yuv420p -vtag xdv3 -vcodec mpeg2video -r 25 -flags +ildct+ilme -top 1 -dc 10 -intra_vlc 1 -non_linear_quant 1 -qmin 1 -qmax 3 -lmin '1*QP2LAMBDA' -rc_max_vbv_use 1 -rc_min_vbv_use 1 -b 35000k -minrate 35000k -maxrate 35000k -bufsize 36408333 -bf 2 -aspect 16:9 -acodec pcm_s16be -vf scale=${FC_PARAM_width}:${FC_PARAM_height} "$3" If there are any other mistakes in the script, please correct me :)

  Read the article

• Not receiving bounced emails from PHPList

  - by user1780242

  I am sending a test campaign to my own address and to a fictitious nonsense address and I am receiving the email at my account but I am not receiving any bounces. My settings in the config.php file are: $message_envelope = '[email protected]'; $bounce_protocol = 'pop'; $bounce_mailbox_host = 'localhost'; $bounce_mailbox_user = '[email protected]'; $bounce_mailbox_password = 'XXXXXX'; What's the next step in figuring out the problem? I also tried both variations of the following: $bounce_mailbox_port = "110/pop3/notls"; #$bounce_mailbox_port = "110/pop3"; I am running a Godaddy Centos 6 VPS and Plesk 11.

  Read the article

• Display Driver stopped responding and recovered successfully- Blue Screen - HP Elite Book

  - by Fahad Saleem

  I have HP ELiteBook , this problem has become a routine headache for me (after every 20, 25 minutes_ - While using, suddenly everything hangs and black out goes around and then a message pop at the task bar below that display driver stopped ...and successfully recovered but the hangs and black screen continues and then the Blue Death Screen comes" and then i have no other option but to restart Is this a driver problem ? Hardware problem ? what should I do Please be specific , no stories and theories

  Read the article

• Disable Win+S Key on Windows 8.1?

  - by Rubistro

  How can the Windows + S keyboard shortcut be disabled on Windows 8.1? I had Win+S mapped to take a screen capture in Windows 8 using Evernote. (not using Windows built-in PrintScr to capture the entire screen): After the update, Win+S always brings up the Search panel: A solution using RegEdit would be fine. I just need it disabled so that other capture programs, such as Evernote and Greenshot can use it (as before, pre-Win 8.1).

  Read the article

• TV not detected by Windows/VGA - when there is a WHDI device in the signal chain

  - by ashwalk

  I'm at my wit's end with this one... I had an EVGA GTS 250, and I used to plug it's HDMI out into a WHDI sender, which transmitted to its corresponding WHDI receiver 15ft away, which then connected to a Samsung LN40D LCD TV through another HDMI cable. PC/VGA < [hdmi cable] < WHDI sender <[air] WHDI receiver < [hdmi cable] < TV It was perfect, stable, no perceivable latency. I just plugged everything the first time and it worked instantly. It sent 5.1 audio, and Windows/nVidia Control Center detected the TV by its name. The WHDI device is this one: http://goo.gl/Q8iWI5 Now I bought an EVGA GTX 650, and WHDI doesn't work anymore. Both Windows and nVidia Control Center won't detect the TV, only the monitor that's connected via DVI. The TV screen shows "TX202913 connected. Check video signal." on top of a black screen. Though the device is not the problem itself, just the fact that it's not allowing direct connection between PC and TV. I would bet that if put an AVR in its place I'd also have this issue. The HDMI on this new card works with other monitors. If I put the older card back, WHDI works normally. I have googled this for 5 months on and off. Once I bumped into a page that showed how to force a display device to always-on through registry edit. Once I restarted windows, the Tv (through WHDI) displayed my expanded or duplicated desktop at 1024x768 ONLY, and listed the display as "digital display". I could not change the resolution and it wouldn't playback audio (although the option was available at nVidia Control Center HDMI audio options, but did not work). This proves that there is no conflict between the devices, except that software-wise, Windows cannot, for the life of it, understand that there's a TV there to send video/audio to. Since this won't do (no audio, poor video), I reverted this regedit. It's also not an EDID problem within the TV, since when connected directly it works. The last weird bit of this saga is that today, I reminded of Windows' "Add Device" dialog, gave it a go, and a "Samsung Generic UPNP TV" showed up, which I promptly installed the drives for, rising to a climax of... ...NOTHING HAPPENING. As far as I can tell, it really didn't change anything other than using up a few kb in my main disc. I should also say that I looked a LOT into handshake problems and nothing applied either. Do any of you have an idea of what may be going on? I can't stand the thought of having a us$200 device not working because of the addition of a newer graphics card, when the much older one had no issues. There is absolutely NO REASON for this to happen. There is NO documentation on WHDI online. Apparently no one buys this stuff. For the same reason, no one responded to this same plea for help on NVidia and EVGA forums. Worst case, this can be a warning about this setup for people in the future. Thanx in advance.

  Read the article

• Logout user script

  - by Baconlove

  I am trying to create a script in ARD that will let me logout a user. Now I have a script which does start the logout, but I want it to execute instead of waiting 60 seconds. The script currently is: osascript -e 'tell application "System Events" to log out' As I said, this works but then I want it to press return on the logout dialog. The script I tried to make it do that is: osascript -e 'tell application "System Events" to log out' -e 'keystroke return' which doesn't work. Is there a way, possibly by telling the system to press Cmd+Opt+q, then Enter, to log out without waiting for the timeout to expire?

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >