Monthly Archives

Articles indexed in April 2012

Page 186/252 | < Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >

  • Can I use the Airport Express as a an uplink between two networks?

    - by Ant Swift
    I have two separate networks using different IP ranges, 192.168.0.* for the wired only, isolated network and 192.160.1.* for the wireless only network which is connected to the internet. The wired network has a network printer setup and working and I want to be able to share it out to members of the wireless network (see diagram below). In short I need some kind of uplink between the two networks. Currently running a cable is out since there is no suitable route. I have a spare Airport Express and I am wondering if I could attach it to the wired network and have it join the wireless and act as the uplink between the two. Anyone know if the device is capable of this?

    Read the article

  • How to route traffic from VM (Parallels) over an Open VPN connection on the host (OS X)

    - by withakay
    Scenario: I have a Mac running Lion that is connected to an OpenVPN server I have a Windows XP VM (running on parallels, but I don't think this is important) I want to be able to route traffic from the XP VM via the host Mac's OpenVPN connection so that I can log on to a domain. The remote network is 172.16.0.0/23 (255.255.254.0) Open VPN is configured to supply address in the 10.100.101.0/24 range and sets up the routing to 172.16.0.0 using the gateway 10.100.101.1/32 My local network is 192.16.1.0/24 NOTE: I do not want to install OpenVPN into the XP virtual machine as I would have to use a passwordless key in order for OpenVPN to connect before logon. Anyone got any ideas?

    Read the article

  • Test disk recovery

    - by AIB
    I had a 250GB hard disk having several NTFS partitions. The disk was a dynamic disk (created in windows). Now when I formatted windows (which was in another disk), the dynamic disk is shown as offline. I tried using the testdisk tool to recover the data and created a partial backup. Testdisk is able to list all partitions in the disk. All partitions are shown as type 'D' (Deleted). I want to change the 'D' to 'P' (Primary), 'L'(Logical), 'E' (Extended) appropriately and build a new partition table. If I can write the partition table to disk, the disk will be of 'basic' type and should be readable in all OS. What should be the appropriate partition types? I checked the files on the partitions and no OS was ound. So none of the partitions were bootable. Will randomly selecting P,L,E hurt the data in anyway?

    Read the article

  • Access denied on virtual machine

    - by newbie
    I have a friend on the same network as me hosting a virtual machine using vmware server.The guest OS is Windows 7 and Windows Server 2003.He granted me administrative priveleges for the machine but when i try to add a user to that VM it says access denied. Moreover when i try to start the VM remotely using the command vmrun -T server -h https://computer-name.domain.com:8333/sdk -u domain/user -p passwd start "[standard] Win2k3Client1/Win2k3Client1.vmx" This shows unsufficient priveleges on host operating system but i am able to login with same username password on VMWare Web Access

    Read the article

  • Could not open IPV6 addr on web browser

    - by vito
    I have ipv6 address fe80::21f:a4ff:fe91:2e44%4. This is the address of modem/router. I am unable to open this address in browser to view the web configuration. I am able to telnet to fe80::21f:a4ff:fe91:2e44%4, view the console UI & can do settings. I can also open 192.168.1.1(IPv4 address of modem/router) in browser. I tried [fe80::21f:a4ff:fe91:2e44] in all browsers like IE, Firefox & Chrome. It was not possible.

    Read the article

  • Windows does not recognize DVDs inserted into Blu-ray drive

    - by icemanind
    I am having a problem with a Blu-ray drive I have in my PC. Its a Blu-ray reader drive and it reads and writes CDs and DVDs. My drive has been working great for about a year now, but for some reason now, when I insert a DVD, Windows 7 doesn't recognize that there is a disc in the drive. I have to eject the disc and insert it again. I sometimes have to do this like 30 times before it "catches" and Windows 7 recognizes the disc. My discs are not scratched up. It does it even with brand new discs. I've tried about 10 different DVDs and the same problem happens. One thing that is weird though is that the problem does not seem to happen when I insert Blu-ray discs. The problem only happens with DVD discs. I tried running a drive lens cleaner. Same issue. Any suggestions?

    Read the article

  • Why won't IE let users login to a website unless in In Private mode?

    - by Richard Fawcett
    I'm not entirely sure this belongs on SuperUser.com. I also considered ServerFault.com and StackOverflow.com, but on balance, I think it should belong here? We host a website which has the same code responding to multiple domain names. On 28th December (without any changes deployed to the website) a percentage of users suddenly could not login, and the blank login page was just rendered again even when the correct credentials were entered. The issue is still ongoing. After remote controlling an affected user's PC, we've found the following: The issue affects Internet Explorer 9. The user can login from the same machine on Chrome. The user can login from an In Private browser session using IE9. The user can login if the website is added to the Trusted Sites security zone. The user can NOT login from an IE session in safe mode (started with iexplore -extoff). Only one hostname that the website responds to prevents login, the same user account on the other hostname works fine (note that this is identical code and database running server side), even though that site is not in trusted sites zone. Series of HTTP requests in the failure case: GET request to protected page, returns a 302 FOUND response to login page. GET request to login page. POST to login page, containing credentials, returns redirect to protected page. GET request to protected page... for some reason auth fails and browser is redirected to login page, as in step 1. Other information: Operating system is Windows 7 Ultimate Edition. AV system is AVG Internet Security 2012. I can think of lots of things that could be going wrong, but in every case, one of the findings above is incompatible with the theory. Any ideas what is causing login to fail? Update 06-Jan-2012 Enhanced logging has shown that the .ASPXAUTH cookie is being set in step 3. Its expiry date is 28 days in the future, its path is /, the domain is mysite.com, and its value is an encrypted forms ticket, as expected. However, the cookie is not being received by the web server during step 4. Other cookies are being presented to the server during step 4, it's just this one that is missing. I've seen that cookies are usually set with a domain starting with a period, but mine isn't. Should it be .mysite.com instead of mysite.com? However, if this was wrong, it would presumably affect all users?

    Read the article

  • How should I troubleshoot a problematic wireless connection on Linux?

    - by Gearoid Murphy
    I recently purchased a netgear 150 usb wireless dongle for use with my 11.10 Xubuntu amd64 system. Using the network-manager interface, I can see local wireless networks and enter the authentication details for my local wireless lan. Unfortunately, the connection does not seem to work, I keep getting notifications that my wireless has disconnected (but none indicating that I've connected). When I examine syslog, it seems to indicate that I've successfully associated with the wireless switch and that dhcp has successfully acquired an ip address but the log shows that the dhcp process keeps sending requests, eventually dropping the connection. 'ifconfig wlan0' never shows the dhcp address logged in syslog. I suspect that the problem lies with the usb dongle, my configuration or the wireless switch but I am not certain how to isolate the problem, can anyone provide some insight on how I should go about homing in on the cause of this problem or verifying the functionality of the individual components, thanks.

    Read the article

  • Altering the Windows 7 grouping thumbnail preview

    - by russ
    I like the windows 7 grouping behaviour for multiple similar windows, except when I have multiple Explorer windows open. In this case, showing thumbnails of each open explorer window is next to useless, and I would like to know how to either: Disable thumbnail display completely (but preserve the grouping behaviour) Disable thumbnail display for a subset of programs (all explorer.exe instances) Change the number of similar programs that are open before the grouping behaviour falls back on a more sensible text preview when hovering over the taskbar icon (currently 14 or over) I don't particularly want to disable any other features of windows to get this behaviour, so disabling the theme compleletely isn't what I want to do. I definitely want to keep the grouping behaviour. Its just those thumbnail previews I would like to alter. Here are some screen shots of what I don't want, and what I do want: http://dl.dropbox.com/u/13184372/StackOverflow/BadGrouping.png http://dl.dropbox.com/u/13184372/StackOverflow/GoodGrouping.png

    Read the article

  • Word 2010 Crashing

    - by Flymo
    We have an office with all users using the same spec'ed PCs with the same Image deployed to them, so that the software and configuration is identical. I have one user whos keeps having the install of MS Word 2010 crash intermittently. First i reinstalled Office 2010 Suite, but will have the crashes. The PC has been replaced with a clean install of Windows and Office but we are still having the issues with Word crashing. We have had the user to log onto another PC which we know to be working fine, but again, Word keeps crashing. Below is the Error from EventViewer: Faulting application name: WINWORD.EXE, version: 14.0.6024.1000, time stamp: 0x4d83e310 Faulting module name: MSVCR90.dll, version: 9.0.30729.6161, time stamp: 0x4dace5b9 Exception code: 0xc0000417 Fault offset: 0x000320f0 Faulting process id: 0xc34 Faulting application start time: 0x01cd1881ea917c33 Faulting application path: C:\Program Files\Microsoft Office\Office14\WINWORD.EXE Faulting module path: C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57\MSVCR90.dll Report Id: edd97602-8477-11e1-aa13-001111db42bf The PC is running Windows 7 Professional and Office 2010 We have tried everything we can think of. If anyone could enlighten us, it would be very much appretiated. Cheers

    Read the article

  • How many virtual processors or cores should I assign to my Guest OS?

    - by reidLinden
    I've just received an upgraded Host machine, and am looking to push some of those advances to my workstations Guest OS(s). In particular, I used to have a single processor, with 2 cores, so my Guest OS only had 1/1. Now, I've got a single processor with 8 cores, so I'm curious about what would be recommended for my Guest OS now? 1 processor/4 cores? 2 processors/2 cores? 4 processors/1 core? My instinct says to stick with the number of physical processors (or less), but, is that based on reality? I spent a good while looking for an answer to this, but perhaps my google-karma isn't in my favor today.

    Read the article

  • Silent install FirePro v4900 Driver on Windows Embedded 7 Standard

    - by Birgit_B
    I'm trying to install the Drivers for a FirePro v4900 on a Windows Embedded 7 Standard 64bit OS. I want the system to be as small as possible, so i would rather not install the whole catalyst control center, but only the necessary drivers. Because the installation should be accomplished absolutely unattended, the installation process of the FirePro-Driver should also be done without any user interaction. I see two possible solutions for the Problem: Install only the Drivers: Is it possible to solely install the necessary drivers? How would i achieve that? This solution would be the preferred one, because of the smaller footprint. Silent custom install the provided "FirePro_8.911.3.3_VistaWin7_X32X64_135673.exe" (found at ATI FirePro™ Driver). Is there a way, to do that? Thank you in advance for your support! Update: I managed to accomplish a silent installation. I extracted the contents of the above mention installer-file and ran \$_OUTDIR\Bin64\Setup.exe -Install. (There are some other Parameters, just run Setup.exe /?). But i couldn't achieve to just install the drivers without the Cataclyst Control Center, and it seams the Control Center has some unfulfilled dependencies and so it crashes...

    Read the article

  • Seven Worlds will collide…. High Availability BI is not such a Distant Sun.

    - by Testas
    Over the last 5 years I have observed Microsoft persevere with the notion of Self Service BI over a series of conferences as far back as SQLBits V in Newport. The release of SQL Server 2012, improvements in Excel and the integration with SharePoint 2010 is making this a reality. Business users are now empowered to create their own BI reports through a number of different technologies such as PowerPivot, PowerView and Report Builder. This opens up a whole new way of working; improving staff productivity, promoting efficient decision making and delivering timely business reports. There is, however; a serious question to answer. What happens should any of these applications become unavailable? More to the point, how would the business react should key business users be unable to fulfil reporting requests for key management meetings when they require it?  While the introduction of self-service BI will provide instant access to the creation of management information reports, it will also cause instant support calls should the access to the data become unavailable. These are questions that are often overlooked when a business evaluates the need for self-service BI. But as I have written in other blog posts, the thirst for information is unquenchable once the business users have access to the data. When they are unable to access the information, you will be the first to know about it and will be expected to have a resolution to the downtime as soon as possible. The world of self-service BI is pushing reporting and analytical databases to the tier 1 application level for some of Coeo’s customers. A level that is traditionally associated with mission critical OLTP environments. There is recognition that by making BI readily available to the business user, provisions also need to be made to ensure that the solution is highly available so that there is minimal disruption to the business. This is where High Availability BI infrastructures provide a solution. As there is a convergence of technologies to support a self-service BI culture, there is also a convergence of technologies that need to be understood in order to provide the high availability architecture required to support the self-service BI infrastructure. While you may not be the individual that implements these components, understanding the concepts behind these components will empower you to have meaningful discussions with the right people should you put this infrastructure in place. There are 7 worlds that you will have to understand to successfully implement a highly available BI infrastructure   1.       Server/Virtualised server hardware/software 2.       DNS 3.       Network Load Balancing 4.       Active Directory 5.       Kerberos 6.       SharePoint 7.       SQL Server I have found myself over the last 6 months reaching out to knowledge that I learnt years ago when I studied for the Windows 2000 and 2003 (MCSE) Microsoft Certified System Engineer. (To the point that I am resuming my studies for the Windows Server 2008 equivalent to be up to date with newer technologies) This knowledge has proved very useful in the numerous engagements I have undertaken since being at Coeo, particularly when dealing with High Availability Infrastructures. As a result of running my session at SQLBits X and SQL Saturday in Dublin, the feedback I have received has been that many individuals desire to understand more of the concepts behind the first 6 “worlds” in the list above. Over the coming weeks, a series of blog posts will be put on this site to help understand the key concepts of each area as it pertains to a High Availability BI Infrastructure. Each post will not provide exhaustive coverage of the topic. For example DNS can be a book in its own right when you consider that there are so many different configuration options with Forward Lookup, Reverse Lookups, AD Integrated Zones and DNA forwarders to name some examples. What I want to do is share the pertinent points as it pertains to the BI infrastructure that you build so that you are equipped with the knowledge to have the right discussion when planning this infrastructure. Next, we will focus on the server infrastructure that will be required to support the High Availability BI Infrastructure, from both a physical box and virtualised perspective. Thanks   Chris

    Read the article

  • Sun ZFS Backup Appliance ??!

    - by user13138569
    ???Sun ZFS Backup Appliance ????????? Exadata ? D2D ??????????????? High Capacity ? High Performance ? 2 ????????????????SunRack 1242 ?????????? ??????? ZFS Storage Appliance ???????????????? Web ??????????????Analytics ??????????????? ????????????????????????? High CapacityHigh Performance ?????? ??? 2 (??????) 2 (??????) CPU Intel Xeon E7-4820 (8-core, 2GHz)x4 Intel Xeon E7-4820 (8-core, 2GHz)x4 ??? 256GB 256GB ???????? QDR Infiniband, 10Gbe, 1Gbe(???? 4 ???????) QDR Infiniband, 10Gbe, 1Gbe(???? 4 ???????) ???????? ??????(Raw) 132TB 55TB ????????? 2 (?? 22 ????????) 4 (?? 22 ????????) ??????? 3TB 7200rpm 600GB 15000rpm ??????????? 4 4 ????????????????????????ZFS Backup Appliance ???? Exadata ?????????????????????????????????????????????·???????????????????? OTN ???????????????????????????????????????? Oracle Exadata Backup Configuration Utility v1.0.1 Oracle ZFS Storage Appliance Plugin Downloads US???????????

    Read the article

  • Customer Concepts TV

    - by Richard Lefebvre
    Eliminate the Guesswork in Your Customer's Sales Organization Selling is the lifeblood of every business. In the past, companies would increase headcount to boost sales. In today’s business environment, companies need to re-evaluate the way in which they sell. Sales and marketing organisations must optimise performance, increase team productivity and focus on the best opportunities. Oracle Fusion CRM has been specifically designed with tools to help sales and marketing teams improve efficiency and drive revenue. Territory modeling and management, quota and commission management, collaborative features, real-time customer information and mobile device integration are just some features incorporated. Join us on Customer Concepts TV as we aim to help you find the right strategy for your prospect and customers. Whether they already have a CRM solution in place or are looking for the next level of CRM implementation, this online TV show will give you very practical advice that can help you to make the most out of your CRM implementation.Register now to reserve your spot for this exclusive, live-stream event. Customer Concepts TV comes to you on April 24. Watch the Customer Concepts TV trailer here

    Read the article

  • Spotlight on RIVA: CRM integration for Oracle CRM on Demand and Microsoft Exchange

    - by Richard Lefebvre
    Introducing Riva from Omni - an Oracle ISV partner specializing in Enterprise Management and Integration Solutions Riva delivers advanced, server-side integration for Oracle CRM On Demand and Microsoft Exchange or even Novell GroupWise. Riva allows Oracle customers to go beyond the standard Outlook plug-in to deliver additional value for the end user as they interact between Outlook and CRM On Demand. Riva syncs CRM On Demand to ALL Exchange mail apps, not just Windows Outlook.  So, whether customers are using Outlook 2010, Outlook Web Access (web client), Outlook 2011 for Mac, Apple Mail, Outlook on Citrix  or a mobile device, Riva's got them covered. There are no plug-ins to be installed, configured, managed and maintained on users' desktops, laptops as Riva delivers Server-side synchronisation for CRMOD and Exchange. The automation of CRM and Outlook integration will remove the reliance upon users to synchronise between the two with Riva handling this process. Riva allows administrators to define sync policies and apply them to individuals or groups of users depending on their sync requirements. Administrators will be able to determine and manage the exposure of the most pertinent detail to be synchronised between Outlook and CRM On Demand. Custom and organic contact filtering for large deployments i.e. Based on ownership, groupings and contact frequency, filters can be applied on what contact records are shared with the users. Riva provides the capability to synchronise CRM and Outlook beyond Contacts, Calendar entries and Email. The synchronisation can be extended to cater for  opportunities, quotes and custom objects for example within the Outlook interface. Riva SmartConvert Folders can automate the creation of opportunities and associated contacts for example if they don't already exist. This can facilitate a reduction in manual detail entry through quick association whilst also benefiting user adoption. From a mobile perspective, Riva allows users to view and manage their CRM On Demand contacts, calendar, tasks, opportunities and cases from iPad, iPhone, Android and BlackBerry devices.  Again, there are no mobile apps or additional plugins to install, configure or manage. We sync CRM On Demand to Exchange.  Because the mobile device is connected to an Exchange mailbox, the information automatically syncs down to the native address book, calendar and mail apps on the smartphone or tablet. Riva Datasheet for CRM On Demand Riva Brochure – Oracle CRM On Demand  Technical Knowledgebase & Riva Trial  http://kb.omni-ts.com/47/ Comparison to Outlook Plug-ins Riva Diagram – Riva Comparison with Outlook Plug-ins Contact: Wolfgang Berger - [email protected]

    Read the article

  • Rundum sicher. Ganzheitlich gut beraten.

    - by A&C Redaktion
    IT-Security hat sich unter den Beratungsthemen zu einer ganzheitlichen Disziplin entwickelt. Trotz der großen Nachfrage sind bisher nur ausgewählte Unternehmen in der Lage, das gesamte Spektrum der IT-Sicherheitsberatung umfassend anzubieten. Die TWINSEC GmbH fokussiert sich als Oracle Gold Partner darauf, große und mittelständische Unternehmen bei der Umsetzung von Sicherheitsanforderungen zu beraten. Norbert Drecker, als Geschäftsführer des Kölner Beratungshauses, kann genau beschreiben, warum das Sicherheitsthema in den obersten Führungsetagen inzwischen höchste Priorität hat. Am Beispiel Oracle Identity Analytics erklärt Norbert Drecker, wie sich die Konsolidierung von Berechtigungen realisieren lässt und welchen Vorteil die Rezertifizierung in der konkreten Anwendung bringt. Wenn Sie erfahren wollen, warum Oracle Identity Analytics das richtige Werkzeug für mehr Sicherheit im Unternehmen ist und, wenn Sie wissen wollen, warum TWINSEC auf die intensive Zusammenarbeit mit Oracle setzt, dann schauen Sie sich das Video an.

    Read the article

  • Invitation: HARNESSING THE POWER OF FUSION

    - by mseika
    HARNESSING THE POWER OF FUSION: IMPLEMENT AND EXTEND ORACLE'S NEXT-GENERATION APPLICATIONS TO MEET CHANGING CLIENT NEEDSBRUSSELS, BELGIUM, APRIL 23RD, 2012 - APRIL 24th, 2012 The pace of business continues to accelerate. Clients demand solutions that not only meet their needs today, but evolve as quickly as markets, competition and technology. Oracle Fusion Applications can help you to anticipate and satisfy your clients changing needs. Designed for an era of business disruption, they co-exist with existing IT investments, but leverage new technologies (such as mobility and SOA) and breakthrough Cloud computing delivery models as you need them. They also support unprecedented levels of extensibility. To show you how, Oracle's Product Development organization invites you to join an exclusive Fusion Applications presentation and demonstration event for Oracle partners in Europe. This intensive 2-day event will illustrate Fusion Applications capabilities that can enhance ROI for your clients across four major product families: Financials, Procurement and Project Portfolio Management (ERP) Customer Relationship Management (CRM) Human Capital Management (HCM) Supply Chain Management (SCM) Led by Oracle Product Development personnel, this event will also demonstrate how to extend the Fusion Applications user experience, data model, business process and reporting using new Functional Setup and Composer technologies. These can help you address unique client needs without impacting future upgrades. This presentation and demonstration event is intended for consulting business development and delivery personnel. Reserve your Seats today for April 23rd - 24th event To register to this event CLICK HERE For further information please contact me at [email protected]. Best regards Paul ThompsonSenior Director EMEA Alliances and Solutions Partner Programs Markku RouhiainenDirector, Applications Partner EnablementWestern Europe

    Read the article

  • Invitation: HARNESSING THE POWER OF FUSION

    - by mseika
    HARNESSING THE POWER OF FUSION: IMPLEMENT AND EXTEND ORACLE'S NEXT-GENERATION APPLICATIONS TO MEET CHANGING CLIENT NEEDSBRUSSELS, BELGIUM, APRIL 23RD, 2012 - APRIL 24th, 2012 The pace of business continues to accelerate. Clients demand solutions that not only meet their needs today, but evolve as quickly as markets, competition and technology. Oracle Fusion Applications can help you to anticipate and satisfy your clients changing needs. Designed for an era of business disruption, they co-exist with existing IT investments, but leverage new technologies (such as mobility and SOA) and breakthrough Cloud computing delivery models as you need them. They also support unprecedented levels of extensibility. To show you how, Oracle's Product Development organization invites you to join an exclusive Fusion Applications presentation and demonstration event for Oracle partners in Europe. This intensive 2-day event will illustrate Fusion Applications capabilities that can enhance ROI for your clients across four major product families: Financials, Procurement and Project Portfolio Management (ERP) Customer Relationship Management (CRM) Human Capital Management (HCM) Supply Chain Management (SCM) Led by Oracle Product Development personnel, this event will also demonstrate how to extend the Fusion Applications user experience, data model, business process and reporting using new Functional Setup and Composer technologies. These can help you address unique client needs without impacting future upgrades. This presentation and demonstration event is intended for consulting business development and delivery personnel. Reserve your Seats today for April 23rd - 24th event To register to this event CLICK HERE For further information please contact me at [email protected]. Best regards Paul ThompsonSenior Director EMEA Alliances and Solutions Partner Programs Markku RouhiainenDirector, Applications Partner EnablementWestern Europe

    Read the article

  • Concurrency Utilities for Java EE 6: JSR 236 Rebooting

    - by arungupta
    JSR 166 added support for concurrency utilities in the Java platform. The JSR 236's, a.k.a Concurrency Utilities for Java EE, goal was to extend that support to the Java EE platform by adding asynchronous abilities to different application components. The EG was however stagnant since Dec 2003. Its coming back to life with the co-spec lead Anthony Lai's message to the JSR 236 EG (archived here). The JSR will be operating under JCP 2.8's transparency rules and can be tracked at concurrency-spec.java.net. All the mailing lists are archived here. The final release is expected in Q1 2013 and the APIs will live in the javax.enterprise.concurrent package. Please submit your nomination if you would like to join this EG.

    Read the article

  • Neue Termine im April und Mai

    - by Ulrike Schwinn (DBA Community)
    Es gibt wieder neue Veranstaltungen der Oracle Business Unit Datenbank. Merken Sie sich die Termine vor! Im April findet ein Webseminar zum Thema "Einfache Installation und Verwaltung von Oracle Datenbanken" statt. Beginn ist um 10:30.  Einwahldaten, Registrierung und Agenda sind hier zu finden. Im Mai werden zwei Workshops zum Thema Oracle Text in der Niederlassung in Düsseldorf (22.05.2012) und Stuttgart (24.05.2012) veranstaltet. Informationen zu Agenda und Anmeldung sind hier zu lesen.  

    Read the article

  • ???: Oracle NoSQL Database??

    - by zhangqm
    ?????????Oracle?????Oracle NoSQL Database,?????NoSQL Database ??????????Oracle NoSQL Database??2???,Community Edition ?Enterprise Edition?????????NoSQL Database 11g R2 (11gR2.1.2.123). ?????????????????: Oracle NoSQL Database OTN portal (includes download facility) Oracle NoSQL Database OTN documentation Oracle NoSQL Database license information ??Oracle NoSQL Database ???????????,????,?????(key-value)???TB????,????????????(???)????,??????????????????????????,????,??????????? ?Oracle NoSQL Database?,???????????key-value???,??key???????:??????????key?(?????string),????????(??????????bytes)??????key-value ??primary key?hash?,????????????????????????????????,???????,????????????????????????? ???????????????????Java API??????Oracle NoSQL Database driver ????????,?????key-value????????????????Oracle NoSQL Database ?????Create, Read, Update and Delete (CRUD)??,???????durability??????????????????????:?????web console???command line??? Oracle Berkeley DB Java Edition Oracle NoSQL Database?? Oracle Berkeley DB Java Edition ????????,??????????????????????????????,?????????????????? ????????????Oracle NoSQL Database Driver?????key-value????????????Oracle NoSQL Database Driver??:?????????hash??????????????????,?????????????????????? ????????Oracle NoSQL Database Oracle NoSQL Database????????????????????????????????????????????????????????????????: ???? ???? ???? ?????? ???? ?????? ????,??,?? ???? ???? ??? (sub-millisecond) ???????? ????? ??????? ????????  ?????Oracle?????? ???? (Oracle Big Data Appliance) ???? ?????????????????????????????????,???“??”???????????,Oracle NoSQL Database???????????Oracle NoSQL Database?????(Cloud)??,????????(TB?PB??)???Oracle NoSQL Database ??????ETL??(??MapReduce, Hadoop)??,??acquire-organize-analyze ?????????? ???????Oracle NoSQL Database?????: • Large schema-less data repositories• Web?? (click-through capture)• ????• ????• ?????????? • Sensor/statistics/network capture (?????, ?????)• ?????????• ???? (MMS, SMS, routing)• ???? Oracle NoSQL Database (Community Edition ??)??????????? Oracle Big Data Appliance???

    Read the article

  • Eight New Oracle Database Assemblies Ready to Run In Your Oracle VM Cloud with Oracle Enterprise Manager 12c

    - by Adam Hawley
    By Sudip Datta, Senior Director, Oracle Enterprise Manager Product Management This week, 8 database virtual assemblies were released via EM 12c Self-Update. The database assemblies are already patched to Oracle recommended levels. Customers running EM 12c in online mode (i.e. connected to My Oracle Support) will see the assemblies in their EM console (screenshot below). They can then deploy the Assemblies using the Self-Service Provisioning outlined in the "Cloud Administration Guide". The EM12c agent will be deployed along with the assemblies, so the databases will be managed automatically from the onset. You can also get a general demo of the cloud management features (including assembly deployment) in http://www.oracle.com/technetwork/oem/cloud-mgmt/index.html. More database and middleware assemblies will follow soon.

    Read the article

  • ?????? ??????????! ?Gold???? vol.5 <??>

    - by M.Morozumi
    ???ORACLE MASTER Gold Oracle Database 11g?????????????? ?????????????????????? ------------------------------- FLASHBACK ( ) ??????????Point-in-Time ???????????? DROP TABLE ?????????????????( ) ????????????????1????????? a. DATABASE b. TABLE c. COLUMN d. ????????????? ??????????????? ------------------------------- ??:b. TABLE ??: FLASHBACK TABLE ???????????Point-in-Time ???????????? DROP TABLE ?????????????????FLASHBACK COLUMN ??????????????

    Read the article

  • John Hitchcock of Pace Describes the Oracle Agile PLM Customer Experience

    John Hitchcock, Senior Manager of Configuration Management at Pace (formerly 2Wire, Inc.), sat down for an interview during Oracle's Innovation Summit with Kerrie Foy, Manager of PLM Product Marketing at Oracle. Learn why his organization upgraded to the latest version of Agile and expanded the footprint to achieve impressive savings and productivity gains across the global, networked product value-chain.

    Read the article

< Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >