Daily Archives

Articles indexed Friday March 30 2012

Page 2/18 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Conky to Monitor WLS Managed Servers

    - by John Graves
    I've been using a little utility on my linux-based machines for years called conky.  It can be used to monitor system resources, but I wanted to modify it to monitor my WebLogic managed servers too. Once installing conky, you'll need to update the .conkyrc file.  Here is a simple example. Basically, the important lines are these: - Admin (7001) ${if_empty ${exec /usr/sbin/lsof -i :7001 | grep LISTEN}}${color red}DOWN${color} ${else}${color green} UP ${color}(${tcp_portmon 7001 7001 count}) ${endif} - OSB (8011) ${if_empty ${exec /usr/sbin/lsof -i :8011 | grep LISTEN}}${color red}DOWN${color} ${else}${color green} UP ${color}(${tcp_portmon 8011 8011 count}) ${endif} - BAM (9001) ${if_empty ${exec /usr/sbin/lsof -i :9001 | grep LISTEN}}${color red}DOWN${color} ${else}${color green} UP ${color}(${tcp_portmon 9001 9001 count}) ${endif} - DB (1521) ${if_empty ${exec /usr/sbin/lsof -i :1521 | grep LISTEN}}${color red}DOWN${color} ${else}${color green} UP ${color}(${tcp_portmon 1521 1521 count}) ${endif} It uses lsof to find out if ports are in use. Here is a video showing it in action.

    Read the article

  • Solution for installing the ADF 11.1.1.6.0 Runtimes onto a standalone WLS 10.3.6

    - by Chris Muir
    A few customers are hitting the following problem with regards to JDeveloper 11.1.1.6.0 so it's worth documenting a solution. As noted in my previous post the ADF Runtimes for JDeveloper 11.1.1.6.0 will work against a 10.3.5 and 10.3.6 WLS server.  In terms of the JDeveloper 11.1.1.6.0 download Oracle has coupled the 10.3.5 server with that release, not a 10.3.6 server. This has caught some customers out as they are attempting to use the JDeveloper installer to load the 11.1.1.6.0 ADF Runtimes into the middleware home of a standalone 10.3.6 WLS server.  When doing so the installer complains as follows: "The product maintenance level of the current server (WebLogic Server: 10.3.5.0) is not compatible with the maintenance level of the product installed on your system (WebLogic Server: 10.3.6.0).  Please obtain a compatible installer or perform maintenance or your current system to achieve the desired level." The solution is to install the runtimes using the standalone 11.1.1.6.0 ADF Runtime Libraries installer available from OTN (see the options under "Application Development Runtime").

    Read the article

  • What Extends JComponent?

    - by Geertjan
    Let NetBeans IDE tell you what extends JComponent: Thanks to Damian from Gdansk in Poland who left a comment in this blog yesterday that explains how to achieve the above: "Let's say you would like to find all implementations of TreeModel interface. I found today an answer: r-click on class/interface -> chose Navigate->Inspect Hierarchy->select second filter at the bottom of opened window or press Alt+Shift+F12 and then Alt+B." In the list above, double-click an item to open it in the NetBeans Java editor. Handy tip, dziekuje bardzo, Damian.

    Read the article

  • No more: "What was my password again? Was it 12345 or 123456?"

    - by hinkmond
    Keep track of all your passwords with this Java ME password tracker on your Java feature phone. See: Java ME KeePassMobile Here's a quote: You can put all your passwords in one database, which is locked with one master key and/or a key file. ... KeePassMobile is a password manager software for mobile phones (J2ME platform) that is compatible to KeePass. With KeePassMobile you are able to store all your passwords in a highly-encrypted KeePass (1.x*) database on your mobile phone and view them on the go! Don't leave home without it! And, don't forget your master password either, because if you do... you're pretty much fried with Y-rays. Hinkmond

    Read the article

  • UK Oracle User Group Event: Trends in Identity Management

    - by B Shashikumar
    As threat levels rise and new technologies such as cloud and mobile computing gain widespread acceptance, security is occupying more and more mindshare among IT executives. To help prepare for the rapidly changing security landscape, the Oracle UK User Group community and our partners at Enline/SENA have put together an User Group event in London on Apr 19 where you can learn more from your industry peers about upcoming trends in identity management. Here are some of the key trends in identity management and security that we predicted at the beginning of last year and look how they have turned out so far. You have to admit that we have a pretty good track record when it comes to forecasting trends in identity management and security. Threat levels will grow—and there will be more serious breaches:   We have since witnessed breaches of high value targets like RSA and Epsilon. Most organizations have not done enough to protect against insider threats. Organizations need to look for security solutions to stop user access to applications based on real-time patterns of fraud and for situations in which employees change roles or employment status within a company. Cloud computing will continue to grow—and require new security solutions: Cloud computing has since exploded into a dominant secular trend in the industry. Cloud computing continues to present many opportunities like low upfront costs, rapid deployment etc. But Cloud computing also increases policy fragmentation and reduces visibility and control. So organizations require solutions that bridge the security gap between the enterprise and cloud applications to reduce fragmentation and increase control. Mobile devices will challenge traditional security solutions: Since that time, we have witnessed proliferation of mobile devices—combined with increasing numbers of employees bringing their own devices to work (BYOD) — these trends continue to dissolve the traditional boundaries of the enterprise. This in turn, requires a holistic approach within an organization that combines strong authentication and fraud protection, externalization of entitlements, and centralized management across multiple applications—and open standards to make all that possible.  Security platforms will continue to converge: As organizations move increasingly toward vendor consolidation, security solutions are also evolving. Next-generation identity management platforms have best-of-breed features, and must also remain open and flexible to remain viable. As a result, developers need products such as the Oracle Access Management Suite in order to efficiently and reliably build identity and access management into applications—without requiring security experts. Organizations will increasingly pursue "business-centric compliance.": Privacy and security regulations have continued to increase. So businesses are increasingly look for solutions that combine strong security and compliance management tools with business ready experience for faster, lower-cost implementations.  If you'd like to hear more about the top trends in identity management and learn how to empower yourself, then join us for the Oracle UK User Group on Thu Apr 19 in London where Oracle and Enline/SENA product experts will come together to share security trends, best practices, and solutions for your business. Register Here.

    Read the article

  • ???????????!???·???

    - by Kumiko Fujita
    “???????????!”???? “???????????!”????????????·????????????????????????????????????????????????????????????? ???????????????????????????????????????????????! ???????·??? ???????????IT???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ??????????????????????????????????????????????????????·???????/?????????????????????????????????????????????????????????????! ???? ????? ????? ??????????????/??/??? ??????????????? PDF??(WMV)??(MP4) ????????????????????/?? ???????????????????? PDF??(WMV)??(MP4) ??????????????????? ?????????~????/????????~ PDF??(WMV)??(MP4) ???????????????????? ?????????????????????????- Oracle ASM Cluster File System (ACFS)????! PDF??(WMV)??(MP4) ??????????????????EM????? ???????? Oracle Enterprise Manager 12c ??? PDF??(WMV)??(MP4) SPARC???????Solaris?????? SPARC ????? ~ OVM ???????! PDF??(WMV)??(MP4) ???? ?Oracle DB 11g R2 ??????????????????/????????????????! Oracle????????

    Read the article

  • John Hitchcock of Pace Describes the Oracle Agile PLM Customer Experience

    John Hitchcock, Senior Manager of Configuration Management at Pace (formerly 2Wire, Inc.), sat down for an interview during Oracle's Innovation Summit with Kerrie Foy, Manager of PLM Product Marketing at Oracle. Learn why his organization upgraded to the latest version of Agile and expanded the footprint to achieve impressive savings and productivity gains across the global, networked product value-chain.

    Read the article

  • How to properly install libsvm-3.11?

    - by Gomathi
    I'm using libvm-3.11. I downloaded it at http://www.csie.ntu.edu.tw/~cjlin/libsvm/ and extracted. Then I set path in Matlb. After that whenever I run my program, it gives the same error always. ??? Invalid MEX-file 'E:\Gomu\Gomu General\final yr Project\proj\libsvm-3.11\windows\svmtrain.mexw32': The specified module could not be found. . Error in == trysvm at 6 svmStruct = svmtrain(T,TrainMat,'showplot',true); What should I do?

    Read the article

  • Proper way to measure the scalability of web Application

    - by Jorge
    Let's say that I have a web Application where i'm going to have 300 users and each one have to see data on real time, imagine that each client make an ajax call to the server to see in real time what's happens with the changes of the data, this calls are made each 300 ms per user. I know that i can run a simulation to see if the hardware of my server supports this example. But what happen's if the number of users start to grow up. Is there a way that i can measure the hardware needed to handle this growing behavior, a software, a formula, algorithm or maybe recommend me if i need to implement an distributed application with multiplies servers and balance the loads.

    Read the article

  • Best IDE for HTML, CSS, and Javascript for mac [closed]

    - by jon2512chua
    I'm currently looking to move to using an IDE for web development. The options I'm considering are: Aptana Studio Coda Expresso Please base your answers on the following criteria, in descending order of importance: Supports HTML, CSS, JavaScript Powerful (having good code completion, good debugger, great syntax highlighting etc) Fast and light Supports HTML5, CSS3, and major JavaScript frameworks (JQuery or YUI) Great design (both usability and aesthetics) Supports PHP, Ruby, and Python Has Git integrated I've updated the question to be more objective. I'm mainly looking for an answer that addresses how well each of the IDEs addresses my criteria.

    Read the article

  • Java vs COBOL programming examples

    - by Jodi
    I am a COBOL programmer, desperately trying to learn and program Java. Although I understand the OO priciples and concepts, I am at a lost putting all together. I am trying to find some examples on how code will look in COBOL vs Java - something a bit more complicated than "hello world" [I am past that initial headache! :-)], that includes OO principles - basically, a decent 1000+ liner in COBOL, with the Java code to work through. After working through book after book, doing the examples, and even writing small java programs at work, I think working through an example I can compare will be the best way to getting my thinking cap converted, and being able to do in Java what I can do after 10 years with COBOL. Can anybody help?

    Read the article

  • What should I think about when switching from Python to Java?

    - by Nick Rosencrantz
    I was a Java developer in the early 2000s, switched to Python in 2008 and now Iäm working in Java again. Is there anything special you think I should keep in mind when going back to a Java environment? I used to work with EJB 1.0, I didn't work with EJB 2.0 and now we have JPA instead. I'm comfortable programming in Java and my new job with Java is much better than my Python job even though Python is my favorite language the tools and others things about my Java job makes it much better. I found when I searched jobs that demand for Java developer was much greater than demand for Python programmers- do you have a similar experience? Thank you

    Read the article

  • Wireless connection works but the internet is too slow to use in Ubuntu 11.04

    - by Garrin
    The internet is so slow as to be unusable. And I'm not being picky. Even after minutes I can't get my Google home page to load. I tried installing a package through apt-get and was getting rates between 0 and a few hundred bytes/s. That's bytes, not kilobytes! Mostly 0 however (no exaggeration, it spends large amounts of time stalled). And I would go to a speed test web site of some kind but I can't since nothing will load. Briefly put, the laptop I am using was connected to two wireless networks while using Ubuntu 11.04 without any issues before this. It was also connected to a wired network without any issues. It dual boats Windows 7 which has never had any issues, not even with the current wireless network. Just to be clear, on the current wi-fi network, Windows 7 encounters no issues (speedtest.net puts the network speed at 1mb/s) but my network connection in Ubuntu 11.04 is so slow as to literally be unusable. I am unfamiliar with the router except for the fact that it boasts a Rogers logo (that's a large ISP/cable provider in Canada for those not familiar with the land of igloos and polar bears). I am far from the router and some desktop widget I use tells me the signal strength is at 58% (it seems fairly reliable and this would appear to match up with the filled bars in the network icon). I should also mention I'm just renting a room in this house so I'm not the network administrator and while I can access the 192.168.0.1 router page, the password wasn't set to 'password' so it's not much use to me. Here are a bunch of commands I ran which don't tell me a whole lot but I thought might be more instructive to the wise around here: lspci (just showing my network card): 05:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) This one is self explanatory. PING www.googele.com (216.65.41.185) 56(84) bytes of data. 64 bytes from nnw.net (216.65.41.185): icmp_req=1 ttl=51 time=267 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=2 ttl=51 time=190 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=3 ttl=51 time=212 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=4 ttl=51 time=207 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=5 ttl=51 time=220 ms --- www.googele.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4003ms rtt min/avg/max/mdev = 190.079/219.699/267.963/26.121 ms ifconfig eth0 Link encap:Ethernet HWaddr 20:6a:8a:02:20:da UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:960 (960.0 B) TX bytes:960 (960.0 B) wlan0 Link encap:Ethernet HWaddr 20:7c:8f:05:c6:bf inet addr:192.168.0.16 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::227c:8fff:fe05:c6bf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:982 errors:0 dropped:0 overruns:0 frame:0 TX packets:658 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:497250 (497.2 KB) TX bytes:95076 (95.0 KB) Thank you

    Read the article

  • Zoom out recursively for all the folders

    - by Chaitanya
    I want to reduce the icons size in all the folders. In ubuntu 11.10, version, there is an option to decrease icons size and I changed there, and all the icons size is reduced recursively. I am using 11.10 version now. Here, whichever folder I open every time I need to zoom out.(I want zoom out). If I have 20 recursive folders, I open each and every folder and right click there and zoom out. Do we have any global command or grapical tool to reduce the icons size in all the folders. I was told that unity will do this work but I am confused how to use it. If unity is the only solution, please guide me where to change the size. Thanks a ton, Thanks, Chaitanya.

    Read the article

  • unzip error "End-of-central-directory signature not found"

    - by Tim
    I try to unzip a zip file, but got an error: $ unzip COCR2_100.zip Archive: COCR2_100.zip End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive. note: COCR2_100.zip may be a plain executable, not an archive unzip: cannot find zipfile directory in one of COCR2_100.zip or COCR2_100.zip.zip, and cannot find COCR2_100.zip.ZIP, period. I googled but didn't find a solution. I was wondering why it is and how I should fix it? Thanks! The zip file can be downloaded from COCR2_100. It is an application, and here is its website http://users.belgacom.net/chardic/cocr2.html. My OS is 10.10.

    Read the article

  • Why can't I change my icon theme in gnome-classic?

    - by Shibumi
    I'm running Ubuntu 11.10 (updated) and gnome-classic (I missed it :3) I've tried setting my icon theme, GTK theme, and window theme in gnome-tweak-tool, as well as Ubuntu Tweak, gconf-editor, and dconf-editor. Even though it shows my selections are selected, the icons and themes stay the same. Any Help would be greatly appreciated! Update: I've tested things out on gnome-shell and Unity, and I have full control over icons and such in those environments, but still no control in gnome-classic. I would really like to figure this out. Update 2: It seems that after uninstalling Unity that I have full control over everything. Any explanation (since Unity or some part of it seemed to be the cause) would be really nice.

    Read the article

  • How to create a recovery partition in memory

    - by Luis Alvarado
    How can I create a recovery partition in memory as an option when booting the PC so that I can check all partitions including the system one that typically loads Ubuntu. This way I can fsck for example the partition that is normally running Ubuntu but without having it running it at that moment. The recovery partition would have access to some tools to check the disck, memory, etc. Is this doable?

    Read the article

  • Is it possible to have .bashrc outside home directory?

    - by FSchmidt
    I want to put a .bashrc file in a directory where my application is located, to set up path variables accordingly independent of the location of the directory at the moment. At the same time, I want to be able to run the application right away, without having to source a shell file to set the path every time. Therefore I figured I could use .bashrc which is executed when the non-login terminal is started. If I do put it in the proper .bashrc in the home directory, I would have to give an absolute path which I want to avoid. Is there a way to have something like .bashrc but not in home directory (ie a shell that is executed when terminal is started?)

    Read the article

  • PC won't boot up after installing 11.10

    - by bakhshu
    I have a HP/Compaq s1010z (AMD64) desktop and installed 11.10 from a CD (using the entire disk). So it formatted the entire drive, went through installation and then it ejected the CD and asked me to click the Restart button, which I did. It rebooted fine the first time, but any time thereafter, it fails. Meaning, after the initial BIOS screen, the monitor seems to be stuck in limbo with a text cursor blinking on the top left corner, as if it can't find anything to boot from. At first I tried reinstalling (reformat entire drive again) - no improvement. Then I did an in-place re-installation (leave home dirs in place, just redo the OS), nothing there either. Then I put in the 11.04 CD, changed the boot order to CD first, and got the CD menu, chose 'Boot from first hard disk' and it booted fine. The problem is that I can't boot without the 11.04 CD, how ironic! Any ideas?

    Read the article

  • downgrading a ubuntu 10.04 LTS virtual server

    - by castigli
    I am downgrading an existing ubuntu 10.04 LTS Virtual Server to one with less memory and a smaller drive ( from 80GB to 40GB ). My hoster ( hetzner.de ) does not give me the possibility of doing an inplace downgrade, so I have to create a new server. What is the best way to make an image of the first system and "apply it" to the new one ? I know there other answer but in my situation I am not sure I would be able to use Clonezilla or other GUI tools, because the installation is minimal with no GUI. Thanks in advance Michele

    Read the article

  • How can I install another version of Ubuntu on my computer and then uninstall it without messing up my bootup process?

    - by snowguy
    I have Ubuntu 11.10 installed and I am having some problems with it. I'd like to see if the problems are related to some customizations I did. Since one of my problems relate to the slow logout process, I don't want to use the live version. I want to actually install a new version in a separate partition along side my current version and then, after testing that new version and figuring out what I want, just removing the partition and going back to a single version of Ubuntu on this computer. Does anyone know how to do that without messing up my boot process?

    Read the article

  • Unity 3D won't load - Choosing "Ubuntu" during login still loads Unity 2D

    - by Shasteriskt
    I just installed Ubuntu 11.10 on my ASUS N43SL laptop and Unity 3D loaded right after installation. But upon reboot, I noticed that Ubuntu loaded Unity 2D instead of Unity 3D. I logged-off and made sure I had "Ubuntu" selected during login, but after many attempts Unity 3D just won't load. Just to make it definite, I did echo $DESKTOP_SESSION on the terminal and it says ubuntu-2d, which is not expected. My laptop runs on i5 with 1Gb NVIDIA GT540M so I don't think its a case of lacking graphics capability. And yes, I have installed the proprietary driver using "Additional Drivers" in "System Settings". What can be the cause of this problem? How can it be fixed?

    Read the article

  • Can not add custom keyboard shortcut

    - by krasilich
    I'm trying to assign custom shortcut to lunch my own script (I don't need it in terminal window, just lunch it) So, I went to Settings - Keyboard - Shortcuts - Custom Shortcuts press the button with "+" and enter the name of shortcut and the command itself. But then I cannot bind keys to that shortcut. I select new row and press needed keys (Shift + F3) and nothing happens. I can change the keys for system shortcuts, but do not have any luck with my own. Any ideas?

    Read the article

  • Unknown file system : grub Rescue

    - by Rahul Rodrigues
    I have Lenovo Y560 Laptop on which installed Windows 7 and Ubuntu 11.10 as dual boot.Due to some reason i had to recover boot loader using bootrec.exe /fixmbr and bootrec.exe /fix boot,It created one partition of size 198MB named "tet" and my both os were working fine. Ysterday while making some changes in partition table i deleted that "tets" partition and after reboot im getting following error Error:unknow filesystem grub rescue i tried to boot from windows installer cd and but it stucks at "starting windows" so not able to run commands which i have mentioned earliar and tried to boot from Ubuntu 11.10,it stucks after showing following error memory full can't kill anymore process. Please help me out

    Read the article

  • Microsoft IntelliMouse episodic pauses

    - by Rob Hills
    I have a Microsoft IntelliMouse connected via USB to a computer (directly, NOT via hub) currently running Ubuntu 11.10, but this problem also existed before we upgraded from 10.10. Every now and then (apparently randomly) the computer "pauses" for anything up to a few seconds. This usually occurs after a mouse movement and during the pause, the computer is completely unresponsive to mouse or keyboard. lsusb shows: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0409:0058 NEC Corp. HighSpeed Hub Bus 001 Device 004: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet] Bus 003 Device 013: ID 045e:001e Microsoft Corp. IntelliMouse Explorer Bus 001 Device 005: ID 04a9:1097 Canon, Inc. PIXMA iP5000 Bus 001 Device 006: ID 0a5c:200a Broadcom Corp. Bluetooth dongle Bus 001 Device 007: ID 0911:1c57 Philips Speech Processing Bus 001 Device 008: ID 04a9:2219 Canon, Inc. CanoScan 9950F so the mouse appears to be correctly identified. Syslog episodically shows the following sequence: Jan 15 11:48:32 kayes-computer kernel: [10588.512036] usb 3-1: USB disconnect, device number 10 Jan 15 11:48:33 kayes-computer kernel: [10589.248026] usb 3-1: new low speed USB device number 11 using uhci_hcd Jan 15 11:48:33 kayes-computer mtp-probe: checking bus 3, device 11: "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1" Jan 15 11:48:33 kayes-computer kernel: [10589.448596] input: Microsoft Microsoft IntelliMouse® Explorer as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input11 Jan 15 11:48:33 kayes-computer kernel: [10589.448706] generic-usb 0003:045E:001E.000B: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:1d.1-1/input0 Jan 15 11:48:33 kayes-computer mtp-probe: bus: 3, device: 11 was not an MTP device though I can't confirm if these are directly associated with the "pauses". Any thoughts on what might be causing this or what else I can do to diagnose the problem?

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >