Monthly Archives

Articles indexed in December 2012

Page 207/287 | < Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >

• overriding default scheduler for blkio requests in cgroups

  - by Aamir Mushtaq

  I am trying to optimize a set of servers that have to reside on single machine. i.e. i can have multiple application server, a DB server and of course a samba server as well in same instance. Now I was looking into several optimizing options available to me. In my quest, i did my tuning of the network stack. coming to the CPU, MEMORY and the BLKIO tweaks, i am using CGROUPS. The problem i am facing is that for enhanced performance in the nature of the applications that i am running, the CFQ Scheduler that is implemented for the BLKIO subsystem is not optimal. I was looking more for a Deadline Scheduler because that will serve my purpose well. My question is whether it is possible for us to change the scheduler in the kernel compilation itself for the BLKIO to Deadline and it will reflect in my usage of [CGROUP hierarchies][3]? Since when running the service cgconf, a new fs is mounted and i dont want it to revert to CFQ scheduler. I also welcome any suggestions that will enable me to have more control over my resources.

  Read the article

• Server-Ip address is not getting displayed in snmp-trap messages

  - by Gaurav

  my problem is about Ip Address which I am receiving on the windows system snmp-trap messages,is some thing like that UDP: [192.168.1.150]:1029->[0.0.0.0]:0 while same trap message on linux system has been displayed as UDP: [192.168.1.150]:1030->[192.168.1.23] Now,if you observed carefully these two ,its clearly shown that server ip is not coming in windows traps-Ip([0.0.0.0]:0).what would be the possible reason?please anyone can help me about understanding this & can provide the solution for this problem.

  Read the article

• [SOLVED]Can't enable mysql and mysqli extension in PHP [closed]

  - by Sydcul

  I used to had my website hosted at a hosting company. But i decided to start my own webserver and in order to get phpBB, MediaWiki, etc. working i need PHP and MySQL. So after a bit of screwing around i could get those working but the MySQL and MySQLi extensions do not seem to work. When i use phpMyAdmin, phpBB, whatever it would say it is not installed correctly. I uncommented it in php.ini, i put my PHP folder in path, still not working. Please note i am not a PHP developer at all. Using: Windows Server 2003 Small Buisiness (too lazy to install Linux) Apache2 (not sure what version) PHP 5.2 (threaded, manually installed) MySQL 5.5.28 Thanks in advance, -Sydcul EDIT: Solved. Don't know how, just used the installer and it worked.

  Read the article

• Point domain to port used by java app

  - by takeshin

  I have successfully installed YouTrack issue tracker following the guides at: http://confluence.jetbrains.net/display/YTD3/Linux.+YouTrack+JAR+as+a+Service http://youtrack.jetbrains.com/issue/JT-7619 The application is now running at: mydomain.com:8080 How do I configure the server to run at youtrack.mydomain.com instead? I've been trying to set a reverse proxy in Apache, but it didn't work for me.

  Read the article

• linux ftp server with virtual users

  - by kjertil

  i know there are already similar questions for this matter but the answers doesn't really make much sense to anyone who is not really technically comfortable in Linux. I've already tried articles like these for example: http://howto.gumph.org/content/setup-virtual-users-and-directories-in-vsftpd/ with the result of accidently breaking the whole system. The problem is that, while there are several technical possibilities to set up virtual users with a FTP server, it is not as easy as managing for instance a Filezilla server on Windows. I've seen some Web based GUI's but most of them seems to be out of date. The different flavours of Linux and the large amount of different popular FTP servers also seems to make the matter more complicated. I guess my question is, is there a way, to set up virtual FTP users on Linux without the hastle of having to manually edit PAM, MYSQL and config files?

  Read the article

• Cisco ASA5505 8.2 Multiple Outside IP to Multiple Inside IP

  - by GriffJ

  Trying to setup ASA5505. Semi working but having issues with accessing services from the outside. ASA5505 Basic License, Version 8.2. (plus upgrade to unlimited inside hosts). Alert: I'm a Cisco Noob. 321.321.39.X is a place holder for privacy. I came up with this config and tested it tonight. ASA Version 8.2(1) ! hostname <removed> domain-name <removed> enable password <removed> encrypted passwd <removed> encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 172.21.36.1 255.255.252.0 ! interface Vlan2 nameif outside security-level 0 ip address 321.321.39.10 255.255.255.248 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name <removed> access-list outside_inbound extended permit tcp any host 321.321.39.10 eq pptp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq https access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 993 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq smtp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 1001 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 465 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq domain access-list outside_inbound extended permit udp any eq domain host 321.321.39.11 eq domain access-list outside_inbound extended permit tcp any host 321.321.39.12 eq www access-list outside_inbound extended permit tcp any host 321.321.39.12 eq https access-list outside_inbound extended permit tcp any host 321.321.39.13 eq www access-list outside_inbound extended permit tcp any host 321.321.39.13 eq https access-list outside_inbound extended permit icmp any any echo-reply access-list outside_inbound extended permit icmp any any source-quench access-list outside_inbound extended permit icmp any any unreachable access-list outside_inbound extended permit icmp any any time-exceeded access-list outside_inbound extended permit icmp any any traceroute access-list outside_inbound extended permit icmp any any echo pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 2 321.321.39.11-321.321.39.14 netmask 255.255.255.248 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface pptp 172.21.37.20 pptp netmask 255.255.255.255 static (inside,outside) 321.321.39.11 172.21.37.14 netmask 255.255.255.255 static (inside,outside) 321.321.39.12 172.21.37.24 netmask 255.255.255.255 static (inside,outside) 321.321.39.13 172.21.37.17 netmask 255.255.255.255 access-group outside_inbound in interface outside route outside 0.0.0.0 0.0.0.0 321.321.39.9 1 route inside 192.168.15.0 255.255.255.0 172.21.36.52 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 172.21.36.0 255.255.252.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet 172.21.36.0 255.255.252.0 inside telnet timeout 60 ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect pptp inspect ipsec-pass-thru inspect http ! service-policy global_policy global prompt hostname context The servers that had static forwards did not have any outside network access. couldn't ping google.com for instance. mail server couldn't Domain POP the Barracuda spam filter from our ISP etc. So after doing some reading I removed the statics for 172.21.37.11, 12 and 13, and replaced those three with what's below.. static (inside,outside) tcp 321.321.39.11 https 172.21.37.14 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 993 172.21.37.14 993 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 smtp 172.21.37.14 smtp netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 1001 172.21.37.14 1001 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 465 172.21.37.14 465 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 domain 172.21.37.14 domain netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 www 172.21.37.24 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 https 172.21.37.24 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 www 172.21.37.17 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 https 172.21.37.17 https netmask 255.255.255.255 Now the servers (for instance 172.21.37.14) could ping the outside world again. Mail started flowing (Domain POP was successful) etc. etc. But I forgot to check if webmail worked from the outside admittedly. But the webservers at 172.21.37.17 and 172.21.37.24 still didn't respond from the outside world. Although I was able to PPTP VPN in on 321.321.39.10 (interface) which is the outside interface IP address. and it is static mapped to 172.21.37.20. So I'm thinking there must be something wrong with NAT somewhere? no response from 321.321.39.11 to 321.321.39.14.. Could anyone look over the config and please let me know what I've done wrong? Is there something I've missed? well obviously but.. please help! Thank you.

  Read the article

• Forward public port to localhost

  - by Dan

  I have a process running on my Ubuntu 12.04 server that insists on binding to a public IP address. I only want it accessible from localhost, and NOT the outside world. I've been trying to work out a way to forward 1.2.3.4:8888 to 127.0.0.1:8888. I saw something about iptables not wanting to forward connections to loopback, and I haven't been able to make it work with xinetd either. It's also important that the connection not only be available on localhost, but be inaccessible on the interface it's trying to run on. Is this even possible?

  Read the article

• How can I make a sub-domain point to a dynamic IP and the rest of the domain as it is hosted on a server with static IP?

  - by sleeping_dragon

  Basically, I have a domain mydomain.com hosted by a certain hosting company on its servers. I have access to the cpanel and can make changes a s per required. However, I want to host a dvr remote interface on one of its pages. The DVR is in my office which has a dynamic IP address. I first thought of using the numerous free DDNS services available. But then since I already own a domain name I thought of using that one. How do I do it?

  Read the article

• What does "link to unknown" mean?

  - by Question Overflow

  I just upgraded my server to Fedora 17 which made a switch of my bootloader from GRUB Legacy to GRUB2. There are two symbolic links in the /etc folder that points to the files grub.conf and grub.cfg in /boot/grub and /boot/grub2 respectively. Though the targets seem correct, the link icons are displaying an X status which seems to indicate that the links are broken. Upon right-clicking the property type, it states "link to unknown". The file size of the link corresponds exactly with the file size of the target file, so, why does the links appear to be broken? The image of the link icons: As requested, the following are the outputs from the commands: $ ls -l /etc/grub.conf lrwxrwxrwx. 1 root root 22 Jul 14 2011 /etc/grub.conf -> ../boot/grub/grub.conf $ ls -l /etc/grub2.cfg lrwxrwxrwx. 1 root root 22 Dec 10 18:57 /etc/grub2.cfg -> ../boot/grub2/grub.cfg

  Read the article

• SSL issues with puppet agent at openSUSE

  - by Roman Grazhdan

  I have a master running at my vps, and it has a simple helloworld manifest which works fine with any ubuntu machine I have. It connects, exchanges keys and creates test file allright, so I'm sure it's not server issue. The agent which is running at a virtual machine with openSUSE says: err: Could not request certificate: SSL_connect returned=1 errno=0 state=SSLv3 read server certificate B: certificate verify failed. This is often because the time is out of sync on the server or client I believe it's probably a broken or missing lib, since the package is not built very accurately - it wouldn't start out of the box because of wrong path to lockfile, for example. So how do I figure out what exactly is wrong here? The time is allright, I've checked it. I probably could do without SSL if it's possible, since that SUSE machines are just for training, but it's the last opportunity.

  Read the article

• what causes drops in apache throughput?

  - by Robbie Mckennie

  i was poking around in the windows task manager, and i found this cool network throughput graphing thing. so i wanted to see it max out, so i started downloading a 1.8gb image (from the localhost to a remote system). but, much to my surprise, it looked like this: i count 16 dips, so i divided the 1.8gb into 16 and i got 115mb. then i looked up the mtu of ip, and i knew the mtu of ethernet from my reading, both far smaller than 115mb. and since tcp is connection orientated, it doesn't have an mtu.

  Read the article

• fatal error 'stdio.h' Python 2.7 on Mc OS X 10.7.5 [closed]

  - by DjangoRocks

  I have this weird issue on my Mac OS X 10.7.5 /Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33:10: fatal error: 'stdio.h' file not found What caused the above error? This error has been bugging me and i can't install mysql-python as i'm stuck with this step. I'm using Python 2.7.3. Things like Google App Engine ( python ), python script, tornado generally works on my mac. But not mysql-python. I've install MySQL using the dmg image and have copied the mysql folder to /usr/local/ How do i fix this? ======UPDATE====== I've ran the command, and tried to install mysql-python by running sudo python setup.py install. But received the following: running install running bdist_egg running egg_info writing MySQL_python.egg-info/PKG-INFO writing top-level names to MySQL_python.egg-info/top_level.txt writing dependency_links to MySQL_python.egg-info/dependency_links.txt writing MySQL_python.egg-info/PKG-INFO writing top-level names to MySQL_python.egg-info/top_level.txt writing dependency_links to MySQL_python.egg-info/dependency_links.txt reading manifest file 'MySQL_python.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' writing manifest file 'MySQL_python.egg-info/SOURCES.txt' installing library code to build/bdist.macosx-10.6-intel/egg running install_lib running build_py copying MySQLdb/release.py -> build/lib.macosx-10.6-intel-2.7/MySQLdb running build_ext gcc-4.2 not found, using clang instead building '_mysql' extension clang -fno-strict-aliasing -fno-common -dynamic -g -O2 -DNDEBUG -g -O3 -Dversion_info=(1,2,4,'rc',5) -D__version__=1.2.4c1 -I/usr/local/mysql/include -I/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7 -c _mysql.c -o build/temp.macosx-10.6-intel-2.7/_mysql.o -Os -g -fno-common -fno-strict-aliasing -arch x86_64 In file included from _mysql.c:29: /Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33:10: fatal error: 'stdio.h' file not found #include <stdio.h> ^ 1 error generated. error: command 'clang' failed with exit status 1 What other possible ways can i fix it? thanks! Best Regards.

  Read the article

• Apache2 default vhost in alphabetical order or override with _default_ vhost?

  - by benbradley

  I've got multiple named vhosts on an Apache web server (CentOS 5, Apache 2.2.3). Each vhost has their own config file in /etc/httpd/vhosts.d and these vhost config files are included from the main httpd conf with... Include vhosts.d/*.conf Here's an example of one of the vhost confs... NameVirtualHost *:80 <VirtualHost *:80> ServerName www.domain.biz ServerAlias domain.biz www.domain.biz DocumentRoot /var/www/www.domain.biz <Directory /var/www/www.domain.biz> Options +FollowSymLinks Order Allow,Deny Allow from all </Directory> CustomLog /var/log/httpd/www.domain.biz_access.log combined ErrorLog /var/log/httpd/www.domain.biz_error.log </VirtualHost> Now I when anyone tries to access the server directly by using the public IP address, they get the first vhost specified in the aggregated config (so in my case it's alphabetical order from the vhosts.d directory). Anyone accessing the server directly by IP address, I'd like them to just get an 403 or a 404. I've discovered several ways to set a default/catch-all vhost and some conflicting opinions. I could create a new vhost conf in vhosts.d called 000aaadefault.conf or something but that feels a bit nasty. I could have a <VirtualHost> block in my main httpd.conf before the vhosts.d directory is included. I could just specify a DocumentRoot in my main httpd.conf What about specifying a default vhost in httpd.conf with _default_ http://httpd.apache.org/docs/2.2/vhosts/examples.html#default Would having a <VirtualHost _default_:*> block in my httpd.conf before I Include vhosts.d/*.conf be the best way for a catch-all?

  Read the article

• What are the possible problems, when wget returns code 500 but same request works in normal browsers?

  - by markus

  What should I be looking for, when wget returns 500 but the same URL works fine in my web browser? I don't see any access_log entries that seem to be related to the error. DEBUG output created by Wget 1.14 on linux-gnu. <SSL negotiation info stripped out> ---request begin--- GET /survey/de/tools/clear-caches/password/<some-token> HTTP/1.1 User-Agent: Wget/1.14 (linux-gnu) Accept: */* Host: testing.thesurveylab.net Connection: Keep-Alive ---request end--- HTTP request sent, awaiting response... ---response begin--- HTTP/1.0 500 Internal Server Error Date: Wed, 12 Dec 2012 14:53:07 GMT Server: Apache/2.2.3 (CentOS) Set-Cookie: blueprint2-staging=8jnbmkqapl30hjkgo0u6956pd1; path=/ Expires: Thu, 19 Nov 1981 08:52:00 GMT Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma: no-cache Strict-Transport-Security: max-age=8640000;includeSubdomains X-UA-Compatible: IE=Edge,chrome=1 Content-Length: 5 Connection: close Content-Type: text/html; charset=UTF-8 ---response end--- 500 Internal Server Error Stored cookie testing.thesurveylab.net -1 (ANY) / <session> <insecure> [expiry none] blueprint2-staging 8jnbmkqapl30hjkgo0u6956pd1 Closed 3/SSL 0x0000000001f33430 2012-12-12 15:53:07 ERROR 500: Internal Server Error.

  Read the article

• Good way to store domain CSR and KEY files

  - by Bert Goethals

  For my company I'm starting to manage more and more domains; and with that more and more certificates for those domains. What is a good way to store the basic KEY and CSR files generated? I was considering a git repo on our private code server. This does not seem secure enough though. Would you suggest and other system, or how this can be done securely with a source control system like git? Also: Does it make sense to store the CRT files and CA files in use?

  Read the article

• disable RADIUS for Cisco 2500 wireless controller

  - by Tim Vaughan

  I have a Cisco 2500 wireless controller and four lightweight access points. I want to use the controller to manage a wireless network secured by WPA only, without using RADIUS or anything else. We'll handle the authentication using a captive portal behind the access points. However, it seems like the controller's default security policy requires a RADIUS server and I can't find out how to switch the policy off. The documentation assumes I'm in an environment which needs heavy-duty security and the use case is actually a small charity/business with much less stringent security requirements. How do I disable the complicated security policy and instead run a simple one that just uses WPA?

  Read the article

• Possible Solution for Setting up a Linux VPN Server to Encrypt WLAN Traffic of Macs and iPhones on

  - by GorillaPatch

  I would like to set up a VPN server on debian linux to encrypt wireless traffic coming from my Mac or iOS device. I would like to use a certificate-based solution. Setting up a PKI infrastructure and managing certificates is OK for me. 1. Which server to pick? By looking through the internet and here on stackoverflow I found the following possible solutions: strongSwan IPSec and racoon Which solution is feasible for a linode running debian squeeze? 2. How to configure the network? If I understood correctly a VPN has a virtual network interface as an endpoint on the server side. Naively I would think that I need a DHCP server running on the server to assign a dynamic private IP (like of the class C network 192.168.xxx.xxx) to the connecting clients. Next I think I would need to set up masquerading to NAT the incoming VPN traffic to the real interface directly connected to the internet. Is this the right way to go? Do you have any configuration examples? I often saw VPN configurations used to connect to your home network, but that is not what I am looking for. I have a server up in the internet and want to use it as a proxy to encrypt traffic in insecure network environments like public WLANs.

  Read the article

• suppress warnings from windows live mail untrusted cerficate ssl

  - by monkeyking

  Hi we have setup our own mailserver using ssl. Each time I start up windows live mail, in comes up with an annoying message that "The server you are connected to is using a security certificate that could not be verified" Is there some way to add this cerficate such that we wont see this message on every program start. When using firefox (our mailserver can also be webbased) or thunderbird, I get the option to allow the certificate without asking again. I'm perfectly aware that we can buy a certificate that will make the message go away, but this we dont want to do. Thanks edit: I have succesfully imported the certificate such that I can access the website without complains using ie, however the problem still persists in windows live mail.

  Read the article

• SQL Server 2008 R2 - Cannot create database snapshot

  - by Chris Diver

  Server: Windows Server 2008 R2 X64 Enterprise SQL: SQL Server 2008 R2 Enterprise X64 I have a default SQL Server instance, the SQL Server service account is running as a domain user. I am trying to create a database snapshot in the directory where the mdf files are stored. The T-SQL syntax is correct. The file system is NTFS. The error message I get is: Msg 1823, Level 16, State 2, Line 1 A database snapshot cannot be created because it failed to start. Msg 5119, Level 16, State 1, Line 1 Cannot make the file "e:\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\TestDB.ss" a sparse file. Make sure the file system supports sparse files. The local SQLServerMSSQLUser$db$MSSQLSERVER group has Full Control permission on the folder where I am trying to create the snapshot. I can fix the problem in two ways, neither of which are suitable. Add the SQL Server service (domain) account to the local Administrators group and restart the SQL service. Grant the local SQLServerMSSQLUser$db$MSSQLSERVER group Full control on E:\ I have tried to change the owner of the DATA directory to SQLServerMSSQLUser$db$MSSQLSERVER to no avail. I have no issue creating a new database Why can I not create a snapshot by giving permission only on the DATA folder? Update 23/09/2010: I have tried mrdenny's suggestion with no luck (but learned something new in the process), I suspect the problem may be due to the fact that the domain is a windows 2000 domain running in mixed mode. I had to install hotfix KB976494 for Server 2008 R2, as the SQL Server 2008 R2 installer would not verify the service account correctly with the domain. I noticed that Server 2000 isn't a supported operating system for SQL 2008 R2 but cannot find anything that would suggest it shouldn't work in a 2000 domain. I dis-joined the test server from the domain and changed the service accounts to the local service account and I still have the same issue. I will try to re-install the server without joining the domain and without the hotfix and see if the issue persists.

  Read the article

• How to add/update lotus notes signature 8.5 from C# using API

  - by faris

  I want build a third party tool to make our employees fill the Contact Form information , and then make him able to add his information as a signature image to the Lotus notes .. so if the customer want to send a new email , the signature will be added automatically to the email .. I use lotus notes V. 8.5 .. But how I can do it ,, is there any API available to make this happens ? I appreciates any help ...

  Read the article

• Read ahead buffering while playing video file from optical disc

  - by Saxtus

  I was wondering if there is a program for Windows 7 (64-bit), that reads ahead the file to be played back (usually MKV files in my case) to the RAM, so the disc that the video file resides in, won't spin for the entire duration of the playback, but only every time the cache is almost empty (with big enough cache so it won't need the drive for long periods). A program that I've used in the past (called DVDIdle), was doing that universally for every video player I wanted, but they've stopped updating it 6 years ago and now it doesn't seem to work with Windows 7 (tried using compatibility mode too). The method I am using now, is to either have the drive wearing down and buzzing all the time or manually copy the entire file to HDD, SSD or RamDisk and play it from there. The closest thing I've found, is a software that slows down the drive's spin speed, but I was looking for something more convenient, automated, without waiting for an entire file to be copied before starting playback or needing any HDD space, like I've used to in the past. Thanks in advance.

  Read the article

• alias gcc='gcc -fpermissive' or modifying ./configure script

  - by robo

  I am compiling quite big project from source. The compilation always ends with: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive] I have already compiled this project one year ago. So I know a solution to this. Actualy I found more solutions: Adding a typecast to appropriate line of cpp code (It went to endless number of changes in each file. So I found next solution.) Modifying a makefile to compile that file with -fpermissive option. (I had to modify a lot of lines in each makefile. So I find even better solution.) "g++" or "gcc" was stored in a variable so I added -fpermissive to these variables. This is the best solution I have. It is sufficient to add this option to each makefile once. Unfortunately this software has big number of subdirectories. So I need to modify more than 100 makefiles. It took me whole day one year ago. Is there a way how to do this faster. What about this? alias gcc='gcc -fpermissive' I am not familiar with aliases. But it should be easy to try this. Is the syntax correct? And is this one correct? alias g++='g++ -fpermissive' ? And do I need to export the alias somehow? Will the make program respect the alias? Should I maybe change ./configure script? Or the ./configure.in? Or other file?

  Read the article

• Convert a gray PNG with alpha to a 1-bit black rectanble with 8-bit alpha

  - by jcayzac

  I use a tool to render LaTeX equations as PNG. The resulting images are in RGBA8888 format. I would like to extract the luminance (grayscale from RGB channels, multiplied by the A channel) as my new alpha channel, set the picture fully black, and save the result in Gray1Alpha8 (G1A8) format. So far I've only managed to get G1A4 or G8A8 but not G1A8. Also, the resulting picture looks like it's not multiplied correctly… convert original.png \ \( -clone 0 -alpha extract \) \ \( -clone 0 -clone 1 -compose multiply -composite \) \ -delete 0 +swap -alpha off -compose copy_opacity -composite -colorspace Gray -depth 4 result.png What am I missing?

  Read the article

• Setting font size of Closed Captions on iPhone using ffmpeg or mencoder

  - by forthrin

  Does anyone know how to either: Make ffmpeg set subtitle font size in the output video file Make mencoder produce an iPhone-compatible video file (with subtitles) I finally found out how to get Closed Captions video on iPhone, with mkv and srt files as source material. The secret was using the mov_text subtitle codec in ffmpeg (and turning on Closed Captions in the iPhone settings of course): ffmpeg -y -i in.mkv -i in.srt -map 0:0 -map 0:1 -map 1:0 -vcodec copy -acodec aac -ab 256k -scodec mov_text -strict -2 -metadata title="Title" -metadata:s:s:0 language=eng out.mp4 However, the font size appears very small on the iPhone, and I can't find out how to set it with ffmpeg (the iPhone has no option for this). I found out that mencoder has a -subfont-text-scale option, but I don't have a lot of experience with this program. The following, my best attempt so far, produces an output file which is not playable on the iPhone. sudo port install mplayer +mencoder_extras +osd mencoder in.mkv -sub in.srt -o out.mp4 -ovc copy -oac faac -faacopts br=256:mpeg=4:object=2 -channels 2 -srate 48000 -subfont-text-scale 10 -of lavf -lavfopts format=mp4 PS! As requested, here is the output from mencoder: 192 audio & 400 video codecs success: format: 0 data: 0x0 - 0xb64b9d2f libavformat version 54.6.101 (internal) libavformat file format detected. [matroska,webm @ 0x1015c9a50]Unknown entry 0x80 [lavf] stream 0: video (h264), -vid 0 [lavf] stream 1: audio (ac3), -aid 0, -alang eng VIDEO: [H264] 1280x544 0bpp 49.894 fps 0.0 kbps ( 0.0 kbyte/s) [V] filefmt:44 fourcc:0x34363248 size:1280x544 fps:49.894 ftime:=0.0200 ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 54.23.100 (internal) AUDIO: 48000 Hz, 2 ch, s16le, 448.0 kbit/29.17% (ratio: 56000->192000) Selected audio codec: [ffac3] afm: ffmpeg (FFmpeg AC-3) ========================================================================== ** MUXER_LAVF ***************************************************************** REMEMBER: MEncoder's libavformat muxing is presently broken and can generate INCORRECT files in the presence of B-frames. Moreover, due to bugs MPlayer will play these INCORRECT files as if nothing were wrong! ******************************************************************************* OK, exit. videocodec: framecopy (1280x544 0bpp fourcc=34363248) VIDEO CODEC ID: 28 AUDIO CODEC ID: 15002, TAG: 0 Writing header... [mp4 @ 0x1015c9a50]Codec for stream 0 does not use global headers but container format requires global headers [mp4 @ 0x1015c9a50]Codec for stream 1 does not use global headers but container format requires global headers Then the following repeats itself for every frame: Pos: 0.0s 1f ( 2%) 0.00fps Trem: 0min 0mb A-V:0.000 [0:0] [mp4 @ 0x1015c9a50]malformated aac bitstream, use -absf aac_adtstoasc Error while writing frame. I recognize -absf aac_adtstoasc as an ffmpeg option (does mencoder spawn ffmpeg?), but I don't know how to pass this option on (my hunch is this is not even the origin of the problem).

  Read the article

• Can there be multiple monitors with these video cards and setup

  - by z_Zelman

  I have a Acer Aspire TimelineX 4830TG-6808 laptop running windows 7 Ultimate with one VGA port and one HDMI port. It has one Intel HD Graphics family card and one NVIDIA GeForce GT 540M. Right now I have one monitor running via the VGA port, and also the basic laptop monitor. When I look at the monitor setup, I see one unused video card available. Can I have another monitor via the HDMI port? If I cannot run three monitors, is there some way I could make a large "single" desktop that extends over two monitors? For the sake of celerity, maybe something like having a virtual machine window that extends over two monitors. Could this maybe come from third party software?

  Read the article

< Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >