Monthly Archives

Articles indexed in October 2013

Page 215/261 | < Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >

  • Forward declaration of derived inner class

    - by Loom
    I ran into problem implementing some variations of factory method. // from IFoo.h struct IFoo { struct IBar { virtual ~IBar() = 0; virtual void someMethod() = 0; }; virtual IBar *createBar() = 0; }; // from Foo.h struct Foo : IFoo { // implementation of Foo, Bar in Foo.cpp struct Bar : IBar { virtual ~Bar(); virtual void someMethod(); }; virtual Bar *createBar(); // implemented in Foo.cpp }; I'd like to place declaration of Foo::Bar in Foo.cpp. For now I cannot succeed: struct Foo : IFoo { //struct Bar; //1. error: invalid covariant return type // for ‘virtual Foo::Bar* //struct Bar : IBar; //2. error: expected ‘{’ before ‘;’ token virtual Bar *createBar(); // virtual IBar *createBar(); // Is not acceptable by-design }; Is there a trick to have just forward declaration of Boo in Foo.hpp and to have full declaration in Foo.cpp?

    Read the article

  • Why SetUnhandledExceptionFilter cannot capture some exception but AddVectoredExceptionHandler can do

    - by wrongite
    I have experienced a problem that the function I passed to the SetUnhandledExceptionFilter didn't get called when the exception code c0000374 raising. But it works fine with the exception code c0000005. Then I tried to use the AddVectoredExceptionHandler instead, and it didn't have the problem, the handler function get called correctly. Is it the API bug? Can I use AddVectoredExceptionHandler instead of SetUnhandledExceptionFilter everywhere? The both functions work correctly with // Exception code c0000005 int* p1 = NULL; *p1 = 99; Only AddVectoredExceptionHandler can capture this exception. // Exception code c0000374 int* p2 = new int; delete p2; delete p2; Test program. #include <tchar.h> #include <fstream> #include <Windows.h> LONG WINAPI VectoredExceptionHandler(PEXCEPTION_POINTERS pExceptionInfo) { std::ofstream f; f.open("VectoredExceptionHandler.txt", std::ios::out | std::ios::trunc); f << std::hex << pExceptionInfo->ExceptionRecord->ExceptionCode << std::endl; f.close(); return EXCEPTION_CONTINUE_SEARCH; } LONG WINAPI TopLevelExceptionHandler(PEXCEPTION_POINTERS pExceptionInfo) { std::ofstream f; f.open("TopLevelExceptionHandler.txt", std::ios::out | std::ios::trunc); f << std::hex << pExceptionInfo->ExceptionRecord->ExceptionCode << std::endl; f.close(); return EXCEPTION_CONTINUE_SEARCH; } int _tmain(int argc, _TCHAR* argv[]) { AddVectoredExceptionHandler(1, VectoredExceptionHandler); SetUnhandledExceptionFilter(TopLevelExceptionHandler); // Exception code c0000374 int* p2 = new int; delete p2; delete p2; // Exception code c0000005 int* p1 = NULL; *p1 = 99; return 0; }

    Read the article

  • iOS: AVQueuePlayer/AVPlayerItem 'An AVPlayerItem can occupy only one position in a player's queue at a time.'

    - by JoshDG
    I keep getting this error: 'An AVPlayerItem can occupy only one position in a player's queue at a time.' I NSLog'd the players items, and none of them seem to be equal. Further, I added this just to be sure: if([player canInsertItem:itemToAdd afterItem:nil]) [player insertItem:itemToAdd afterItem:nil]; When I wasn't sure if that would work (can have two identical items in different memory locations) I wrote a category method to test if a player contains an item or something identical to it. Yet, I'm still getting the error. I've seen several posts of people getting this error with MPMoviePlayerController, but I'm not using that custom class, just the out of the box AVQueuePlayer. Any ideas on how to fix this?

    Read the article

  • jQuery Validate plugin - password check - minimum requirements - Regex

    - by QviXx
    I've got a little problem with my password-checker. There's got a registration form with some fields. I use jQuery Validate plugin to validate user-inputs. It all works except the password-validation: The password should meet some minimum requirements: minimum length: 8 - I just use 'minlength: 8' at least one lower-case character at least one digit Allowed Characters: A-Z a-z 0-9 @ * _ - . ! At the moment I use this code to validate the password: $.validator.addMethod("pwcheck", function(value, element) { return /^[A-Za-z0-9\d=!\-@._*]+$/.test(value); }); This Code works for the allowed characters but not for minimum requirements. I know that you can use for example (?=.*[a-z]) for a lower-case-requirement. But I just don't get it to work. If I add (?=.*[a-z]) the whole code doesn't work anymore. I need to know how to properly add the code to the existing one. Thank you for your answers! This is the complete code <script> $(function() { $("#regform").validate({ rules: { forename: { required: true }, surname: { required: true }, username: { required: true }, password: { required: true, pwcheck: true, minlength: 8 }, password2: { required: true, equalTo: "#password" }, mail1: { required: true, email: true }, mail2: { required: true, equalTo: "#mail1" } }, messages: { forename: { required: "Vornamen angeben" }, surname: { required: "Nachnamen angeben" }, username: { required: "Usernamen angeben" }, password: { required: "Passwort angeben", pwcheck: "Das Passwort entspricht nicht den Kriterien!", minlength: "Das Passwort entspricht nicht den Kriterien!" }, password2: { required: "Passwort wiederholen", equalTo: "Die Passwörter stimmen nicht überein" }, mail1: { required: "Mail-Adresse angeben", email: "ungültiges Mail-Format" }, mail2: { required: "Mail-Adresse wiederholen", equalTo: "Die Mail-Adressen stimmen nicht überein" } } }); $.validator.addMethod("pwcheck", function(value, element) { return /^[A-Za-z0-9\d=!\-@._*]+$/.test(value); }); }); </script>

    Read the article

  • Apk Expansion Files - Application Licensing - Developer account - NOT_LICENSED response

    - by mUncescu
    I am trying to use the APK Expansion Files extension for Android. I have uploaded the APK to the server along with the extension files. If the application was previously published i get a response from the server saying NOT_LICENSED: The code I use is: APKExpansionPolicy aep = new APKExpansionPolicy(mContext, new AESObfuscator(getSALT(), mContext.getPackageName(), deviceId)); aep.resetPolicy(); LicenseChecker checker = new LicenseChecker(mContext, aep, getPublicKey(); checker.checkAccess(new LicenseCheckerCallback() { @Override public void allow(int reason) { @Override public void dontAllow(int reason) { try { switch (reason) { case Policy.NOT_LICENSED: mNotification.onDownloadStateChanged(IDownloaderClient.STATE_FAILED_UNLICENSED); break; case Policy.RETRY: mNotification.onDownloadStateChanged(IDownloaderClient.STATE_FAILED_FETCHING_URL); break; } } finally { setServiceRunning(false); } } @Override public void applicationError(int errorCode) { try { mNotification.onDownloadStateChanged(IDownloaderClient.STATE_FAILED_FETCHING_URL); } finally { setServiceRunning(false); } } }); So if the application wasn't previously published the Allow method is called. If the application was previously published and now it isn't the dontAllow method is called. I have tried: http://developer.android.com/guide/google/play/licensing/setting-up.html#test-response Here it says that if you use a developer or test account on your test device you can set a specific response, I use LICENSED as response and still get NOT_LINCESED. Resetting the phone, clearing google play store cache, application data. Changing the versioncode number in different combinations still doesn't work. Edit: In case someone else was facing this problem I received an mail from the google support team We are aware that newly created accounts for testing in-app billing and Google licensing server (LVL) return errors, and are working on resolving this problem. Please stay tuned. In the meantime, you can use any accounts created prior to August 1st, 2012, for testing. So it seems to be a problem with their server, if I use the main developer thread everything works fine.

    Read the article

  • Using Validation Groups Inside ASP.NET User Controls

    - by bipinjoshi
    Validation groups allow you to validate data entry controls in groups. Server controls such as validation controls, Button and TextBox have ValidationGroup property that takes a string value. All the server controls having the same ValidationGroup value act as one validation group. Validation groups come handy in situations where you wish to validate only a small set of controls from many controls housed on a Web Form. Using validation groups is quite easy and straightforward. However, if you have a validation group inside a user control and there are more than one user control instances on a Web Form you face some problem.http://www.binaryintellect.net/articles/13427d3d-1f98-4dc0-849b-72e95b8b66a2.aspx 

    Read the article

  • Configuring Site Policy in SharePoint 2013 using server code

    - by panjkov
    When you create Site Policy in SharePoint, you can configure its options using browser, which is particularly convenient when you have that policy configured for publishing in Content Type Hub. But, when you need to configure multiple sites with same policy, and you for any reason have to deploy multiple instances of same site policy, this browser-based editing process is not something that you would want to use. In that case, some way of configuring policy options automatically would be helpful...(read more)

    Read the article

  • How to fix a Silverlight download progress indicator that jumps from 0% to 100%

    - by JaydPage
    Originally posted on: http://geekswithblogs.net/JaydPage/archive/2013/10/29/fixing-a-broken-silverlight-xap-file-download-progress-indicator-that.aspxAfter moving our silverlight application to a new server I came across an problem whereby the download progress indicator on the splash screen was stuck on 0% until the file had completely downloaded.After about an hour of searching for the answer I realised that there is a distinct lack of help out there for this problem.It is a simple fix:1) On the server that is hosting your website, go into IIS and click on the website.2) Click on the compression section3) Un-check the option that says "Dynamic Content Compression"4) Save changes

    Read the article

  • Shared Excel WorkBook is locked by another user

    - by Simone
    I’ve been trying everything; this is the last chance I have. I moved folders and files from an old Windows Server 2003 File Server to a new FS (Win Server 2008 R2) with DFS and ABE enabled. Now, a specific Shared Excel file is driving me crazy, out of a sudden, lots of times per day, users are getting the following error while opening that file: Filename.xlsx is locked for editing by ‘another user’. Open ‘Read-Only’ or, click ‘Notify’ to open.. I’ve already followed this, with no joy: http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/05/14/the-definitive-locked-file-post.aspx In any case, I strongly think this is not client-related, since it never gave that problem in the past with Windows Server 2003. I’ve found and followed many other solutions, nothing. The users are all utilizing Office 2010 on Windows 7 machines, besides a few users who are still on Windows XP machines. I appreciate any help, thank you!

    Read the article

  • Could not find rake-10.1.0 in any of the sources

    - by spuder
    I've got a ruby on rails application (gitlab) which is installed via puppet. Everything on the test system runs fine, but production generates an error about rake Running /home/git/gitlab-shell/bin/check Could not find rake-10.1.0 in any of the sources Run bundle install to install missing gems. Here is the full rake check: root@gitlab:/home/git# sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production Checking Environment ... Git configured for git user? ... yes Has python2? ... yes python2 is supported version? ... yes Checking Environment ... Finished Checking GitLab Shell ... GitLab Shell version >= 1.7.1 ? ... OK (1.7.1) Repo base directory exists? ... yes Repo base directory is a symlink? ... no Repo base owned by git:git? ... yes Repo base access is drwxrws---? ... yes update hook up-to-date? ... yes update hooks in repos are links: ... Could not find rake-10.1.0 in any of the sources Run `bundle install` to install missing gems. gitlab-shell self-check failed Try fixing it: Make sure GitLab is running; Check the gitlab-shell configuration file: sudo -u git -H editor /home/git/gitlab-shell/config.yml Please fix the error above and rerun the checks. Checking GitLab Shell ... Finished Checking Sidekiq ... Running? ... yes Number of Sidekiq processes ... 1 Checking Sidekiq ... Finished Checking GitLab ... Database config exists? ... yes Database is SQLite ... no All migrations up? ... yes GitLab config exists? ... yes GitLab config outdated? ... no Log directory writable? ... yes Tmp directory writable? ... yes Init script exists? ... yes Init script up-to-date? ... yes projects have namespace: ... Spencer Owen / bar ... yes Projects have satellites? ... Spencer Owen / bar ... can't create, repository is empty Redis version >= 2.0.0? ... yes Your git bin path is "/usr/bin/git" Git version >= 1.7.10 ? ... yes (1.8.4) Checking GitLab ... Finished The step 'gitlab-shell check' effectively runs the following command. If I run that command manually, everything passes. root@gitlab:/home/git/gitlab# sudo -u git -H /home/git/gitlab-shell/bin/check Check GitLab API access: OK Check directories and files: /home/git/repositories: OK /home/git/.ssh/authorized_keys: OK I have verified that rake is in fact installed root@gitlab:/home/git/gitlab# gem install rake -v 10.1.0 root@gitlab:/home/git/gitlab# bundle install root@gitlab:/home/git/gitlab# sudo -u git -H gem install rake -v 10.1.0 root@gitlab:/home/git/gitlab# sudo -u git -H bundle install Ruby is installed with update alternatives root@gitlab:/home/git/gitlab# sudo -u git -H ruby --version ruby 1.9.3p0 (2011-10-30 revision 33570) [x86_64-linux] root@gitlab:/home/git/gitlab# sudo -u git -H ls -l `which ruby` lrwxrwxrwx 1 root root 22 Oct 8 20:26 /usr/bin/ruby -> /etc/alternatives/ruby root@gitlab:/home/git/gitlab# sudo -u git -H gem --version 2.1.10 root@gitlab:/home/git/gitlab# sudo -u git -H ls -l `which gem` lrwxrwxrwx 1 root root 21 Oct 10 20:50 /usr/bin/gem -> /etc/alternatives/gem I've tried the solution mentioned below, to allow shared gems http://stackoverflow.com/questions/19284914/bundle-exec-fails-with-could-not-find-rake-10-1-0-in-any-of-the-sources http://stackoverflow.com/questions/18978002/could-not-find-rake-with-bundle-exec root@gitlab:/home/git/gitlab# cat /home/git/gitlab/.bundle/config --- BUNDLE_FROZEN: '1' BUNDLE_PATH: vendor/bundle BUNDLE_WITHOUT: development:test:postgres BUNDLE_DISABLE_SHARED_GEMS: '1' I've exhausted google, so I'm hoping for someone more familiar with ruby to offer any ideas how to resolve the error. Could not find rake-10.1.0 in any of the sources

    Read the article

  • What does Embedded SATA Controller : ATA mean?

    - by paulH
    I have a Poweredge R510 server with a PERC H700 Integrated RAID controller that is exhibiting slower than expected disk speeds (RAID 1 and RAID 10 arrays) and I'm looking at the configuration of the server. Running the command omreport chassis biossetup on the server shows me the following configuration setting: Embedded SATA Controller : ATA I can also see that the possible options for this setting are: off | ata | qdma | raid I've been looking online to find out what this setting means and what the various options refer to but I've been unable to find anything particularly helpful, so I was hoping that somebody here could help to enlighten me. Thanks, Paul.

    Read the article

  • HDFS datanode startup fails when disks are full

    - by mbac
    Our HDFS cluster is only 90% full but some datanodes have some disks that are 100% full. That means when we mass reboot the entire cluster some datanodes completely fail to start with a message like this: 2013-10-26 03:58:27,295 ERROR org.apache.hadoop.hdfs.server.datanode.DataNode: java.io.IOException: Mkdirs failed to create /mnt/local/sda1/hadoop/dfsdata/blocksBeingWritten Only three have to fail this way before we start experiencing real data loss. Currently we workaround it by decreasing the amount of space reserved for the root user but we'll eventually run out. We also run the re-balancer pretty much constantly, but some disks stay stuck at 100% anyway. Changing the dfs.datanode.failed.volumes.tolerated setting is not the solution as the volume has not failed. Any ideas?

    Read the article

  • .htaccess redirect root directory and subpages with parameters

    - by wali
    I am having difficulty trying to redirect a root directory while at the same time redirect pages in a sub directory to a different URL. For example: http://test.example.com/olddir/sub/page.php?v=one to http://test.example.com/new/one while also redirecting the any request to the root of the olddir folder. I have tried RewriteCond %{QUERY_STRING} v=one RewriteRule ^/olddir/sub/page.php /new/? [R=301] and RedirectMatch /oldir "test.example.com" RedirectMatch /olddir/sub/page.php?v=one "test.example.com/new/one" Any help at this point will be extremely appreciated...Thanks!

    Read the article

  • "tshark: There are no interfaces on which a capture can be done" in Amazon Linux AMI

    - by user1264304
    My goal is to capture packets with tshark in Amazon Linux AMI. While typing tshark in the command line there's an error: "tshark: There are no interfaces on which a capture can be done" How to implement the solution from Wireshark setup Linux for nonroot user $ sudo apt-get install wireshark $ sudo dpkg-reconfigure wireshark-common $ sudo usermod -a -G wireshark $USER $ gnome-session-quit --logout --no-prompt in Amazon Linux AMI (it's not Ubuntu)? Thanks.

    Read the article

  • Access to message queuing system is denied MSMQ?

    - by user1401694
    My problem is a little confusing. I have 2 servers (Windows Server 2008 R2) with MSMQ installed and I want to use Server B to consume a MessageQueue on Server A. When I try to Receive it always throws a message error: "Access to message queuing system is denied.". IP between them. Server A: 172.31.23.130 Server B: 172.31.23.195 FormatName:Direct=TCP:172.31.23.195\private$\queuesource (It's working for Sends) I can ping each server from the other; The firewall is disabled; The "queuesource" has Full Control to "Everyone", "Anonymous Logon", "Network", "Network Services"; Journal is disabled; Authentication is ok; The queue is Transactional. My code in .Net C# is basically like this: MessageQueue _sourceQueue = new MessageQueue(); _sourceQueue.Path = "FormatName:Direct=TCP:172.31.23.195\private$\queuesource"; _sourceQueue.Receive(); // << here throw an exception. Actually I'm using the Private Queue only to avoid Active Directory's problems. For example, if the server DNS fail all network fail. I don't know what do anymore.

    Read the article

  • how to use iptables to block the IP of device connected to openwrt router

    - by scola
    I have two routers(A,B).the A connect to internet with IP:192.168.1.1 The openwrt router B connect the lan of A by bridge with static IP:192.168.1.111. I am learning to use iptables to control the devices connected to B(wlan) . I use my phone to connect wifi of B,the phone's IP is IP:192.168.1.100.it can surf the internet normally. I want to block the phone's IP to make the phone can not connect to internet. refer to http://bredsaal.dk/some-small-iptables-on-openwrt-tips iptables -A input_wan -s 192.168.1.100 --jump REJECT iptables -A forwarding_rule -d 192.168.1.100 --jump REJECT but it do not work.the phone still connect to internet normally. and I tried other chain(INPUT,OUTPUT,FORWARD).so many chains confused me. iptables -I OUTPUT -o br-lan -s 192.168.1.100 -j DROP and it do not work again. I'm sure that the iptables have no problem. root@OpenWrt:/etc# iptables -L|grep Chain Chain INPUT (policy ACCEPT) Chain FORWARD (policy DROP) Chain OUTPUT (policy ACCEPT) Chain forward (1 references) Chain forwarding_lan (1 references) Chain forwarding_rule (1 references) Chain forwarding_wan (1 references) Chain input (1 references) Chain input_lan (1 references) Chain input_rule (1 references) Chain input_wan (1 references) Chain output (1 references) root@OpenWrt:/etc# ifconfig br-lan Link encap:Ethernet HWaddr 0C:82:68:97:57:BA inet addr:192.168.1.111 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::e82:68ff:fe97:57ba/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14976 errors:0 dropped:0 overruns:0 frame:0 TX packets:7656 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2851980 (2.7 MiB) TX bytes:1902785 (1.8 MiB) eth0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:58201 errors:0 dropped:11 overruns:0 frame:0 TX packets:45012 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:54591348 (52.0 MiB) TX bytes:5711142 (5.4 MiB) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:312 errors:0 dropped:0 overruns:0 frame:0 TX packets:312 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:39961 (39.0 KiB) TX bytes:39961 (39.0 KiB) mon.wlan0 Link encap:UNSPEC HWaddr 0C-82-68-97-57-BA-00-48-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4900 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1223807 (1.1 MiB) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37346 errors:0 dropped:0 overruns:0 frame:0 TX packets:49662 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:3808021 (3.6 MiB) TX bytes:54486310 (51.9 MiB) root@OpenWrt:/etc/config# cat network config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'ifname' 'eth0' option 'type' 'bridge' option 'proto' 'static' option 'ipaddr' '192.168.1.111' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.1' option dns 192.168.1.1 and how to use iptables to control the network of wlan? Thanks in advance and sorry for poor English.

    Read the article

  • CPU Affinity on ARM processors

    - by dsljanus
    I am using some RaspberryPI boards for a data acquisition system. They are nice boards, with plenty of community support around them, but they are really slow. I am thinking of gradually replacing them with ODROID multicore boards, with the Samsung Exynos processors. I have some experience using taskset to set CPU affinity on my servers because I am always running Node.js applications that are by definition single threaded. Now, is it possible to do this on an ARM board? I do not see why it would not in theory, but I have doubts over how well it is going to work. Does anyone have experience with this kind of hack? Also, I would appreciate any comments about ARM CPUs and how they differ from x86.

    Read the article

  • How to see all nics in Solaris 8/9

    - by help_me
    I have a questions regarding how to see all NICS in the solaris 8/9 SPARC boxes. Even if they are active/inactive. dladm show-link command does not work. cat /etc/path_to_inst could but it's hard to make out the NICS. Also when a cable is disconnected from the NIC ifconfig -a still shows the NIC as "UP/RUNNING" without looking at the system message, is there a way to know that the NIC is unplugged? Thank you!

    Read the article

  • Remove Applications page on MDT 2012 Deployment Summary

    - by Ben M.
    I am using SCCM 2012 and MDT 2012 for OSD and app deployment. Because of the nature of how some of the apps need to be detected (and which changes as apps get updated) they show up with a warning sign on the Applications tab of the Deployment Summary. There is pretty much no way to get them all green check marked (not realistically in our setup anyway) so I would like to get rid of that page so that I don't have to hear about it from my teams as they deploy. Any help would be appreciated. MDT Summary screen: Applications Installed (the tab I want to remove)

    Read the article

  • How long are the default times for greylisting? [on hold]

    - by rubo77
    In Wikipedia it sais: A mail transfer agent (MTA) using greylisting will "temporarily reject" any email from a sender it does not recognize. If the mail is legitimate the originating server will, after a delay, try again and, if sufficient time has elapsed, the email will be accepted. But how can I find out how long these delays are on my server and on the receiving side? My goal is to speed up email-traffic with partners using greylisting too and speed up the receiving of the first email someone sends to customers on my server.

    Read the article

  • Connecting with SMB from Mac to Windows server

    - by Jérôme
    I'm trying to connect from my Mac to a directory on a Windows server. Here is what I'm doing from the finder : menu Go->connect to server->smb://srv-fichiers1/Personnel/conujer I get an error (error code -36). But, from the finder window, if I click on Shared->All->srv-fichier1->Personnel->conujer, I have access to the directory. I don't understand why I cannot connect straight to conujer.

    Read the article

  • bash script with permanent ssh connection

    - by samuelf
    I use a bash script which runs /usr/bin/ssh -f -N -T -L8888:127.0.0.1:3306 [email protected] However, when I run the bash script, it waits.. I see the connection coming up but the script doesn't exit.. it's like it's waiting for the SSH process to finish, because when I manually kill it the bash script finishes as well. Any ideas how to resolve this? UPDATE: I have croned this script.. and the cron process is the one that becomes a zombie.. the actual scripts runs just fine, sorry about that, with ps -auxf I get: root 597 0.0 0.7 2372 912 ? Ss Jul12 0:00 cron root 2595 0.0 0.8 2552 1064 ? S 02:09 0:00 \_ CRON 1001 2597 0.0 0.0 0 0 ? Zs 02:09 0:00 \_ [sh] <defunct> 1001 2603 0.0 0.0 0 0 ? Z 02:09 0:00 \_ [cron] <defunct> and when I kill the ssh the defuncts disappear.. why would they become defunct?

    Read the article

  • Please help to find a solution for two way, real-time synchronization on Centos 5.5 64Bit

    - by Vipul Limbachiya
    I am in need of a real time, two way synchronization software for Centos 5.5 / 64Bit. Here's little explanation: It needs to be able to perform: Two way synchronization. It must be realtime. By realtime means it can be almost realtime, i.e. a delay of 1 second for example is fine. And the folders are on the same server. I am currently using GlusterFS across two webservers. However, it has extremely poor small file read performance and it's slowing down my website. There's nothing more that can be done to improve this, I have already tested many configurations. As a solution, I was going to mount a RAM drive (tmpfs) that mirrors the GlusterFS web files but get the webserver to use the RAM drive. The issue is that I need two way realtime mirroring or replication between glusterfs and the RAM drive. I need this is as Apache writes files as wells. As I said, realtime two way synchronization across two folders. Which are in fact 2 different mounts points. The RAM (tmpfs) mount poing and the GlusterFS mount point. I already know about: Rsync - Which is one way Unison - Which is not realtime Please suggest me any solution free or paid. Thanks in advance

    Read the article

  • Installing Helvetica on Windows

    - by Marek D
    I've installed Helvetica Neue fonts on my Windows. The problem is when websites use Helvetica or Helvetica Neue typeface, they almost exclusively do it simply using "Helvetica" or "Helvetica Neue" font-family. But In my windows, the Helvetica fonts are installed as a "HelveticaNeueLT Com 45 Lt" or "Helvetica LT Std" or similar extended name. I've tried to create my test page, and the browser renders the font properly only if I use the full font name. I'd like to know, how to make windows/browser display Helvetica properly?

    Read the article

  • How to remove large number of files/folders in linux

    - by user1745713
    We are using hadoop to split a table into smaller files to feed to mahout, but in the process, we created a huge amount of _temporary logs. we have an nfs mount for the hadoop volume so we can use all the linux commands to delete folders files, but we just can't get them to be deleted, here's what I've tried so far: hadoop fs -rmr /.../_temporary : hangs for hours and does nothing on nfs mount: rmr -rf /.../_temporary :hangs for hours and does nothing find . -name '*.*' -type f -delete : same as above the folders look like this (38 of these folders inside _temporary): drwxr-xr-x 319324 user user 319322 Oct 24 12:12 _attempt_201310221525_0404_r_000000_0 the content of these are actually folders, not files. each one of those 319322 folders has exactly one file inside. not sure why the do the logging this way. Any help is appreciated.

    Read the article

< Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >