Monthly Archives

Articles indexed in June 2012

Page 36/464 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

  • Java: Combination of recursive loops which has different FOR loop inside; Output: FOR loops indexes

    - by vvinjj
    currently recursion is fresh & difficult topic for me, however I need to use it in one of my algorithms. Here is the challenge: I need a method where I specify number of recursions (number of nested FOR loops) and number of iterations for each FOR loop. The result should show me, something simmilar to counter, however each column of counter is limited to specific number. ArrayList<Integer> specs= new ArrayList<Integer>(); specs.add(5); //for(int i=0 to 5; i++) specs.add(7); specs.add(9); specs.add(2); specs.add(8); specs.add(9); public void recursion(ArrayList<Integer> specs){ //number of nested loops will be equal to: specs.size(); //each item in specs, specifies the For loop max count e.g: //First outside loop will be: for(int i=0; i< specs.get(0); i++) //Second loop inside will be: for(int i=0; i< specs.get(1); i++) //... } The the results will be similar to outputs of this manual, nested loop: int[] i; i = new int[7]; for( i[6]=0; i[6]<5; i[6]++){ for( i[5]=0; i[5]<7; i[5]++){ for(i[4] =0; i[4]<9; i[4]++){ for(i[3] =0; i[3]<2; i[3]++){ for(i[2] =0; i[2]<8; i[2]++){ for(i[1] =0; i[1]<9; i[1]++){ //... System.out.println(i[1]+" "+i[2]+" "+i[3]+" "+i[4]+" "+i[5]+" "+i[6]); } } } } } } I already, killed 3 days on this, and still no results, was searching it in internet, however the examples are too different. Therefore, posting the programming question in internet first time in my life. Thank you in advance, you are free to change the code efficiency, I just need the same results.

    Read the article

  • Firefox not honoring must-revalidate cache headers returned by jQuery.ajax() request

    - by Oliver Weichhold
    UPDATE 1: Judging by this thread I am not the only one having this problem in FF 12 and only in 12. UPDATE 2: The problem does not seem to be limited to Ajax requests. From the looks of it everything that makes it into Firefox 12's cache will be fetched from there. No matter what. The server can specify cache control headers all day long. Bummer! What I'm trying to achieve is the following behavior: Browser may cache the response without revalidating for up to 5 minutes I don't care if the browser revalidates on every request (Both Chrome and IE9 do for example) When the expiration is up the browser MUST revalidate (which in my case will result in fresh data) Chrome and IE9 exhibit the desired behavior when issuing a jquery.ajax() request with ifModified: true and cache: true while Firefox 12 never revalidates, which poses a serious problem. These are the actual response headers: HTTP/1.1 200 OK Server: nginx Date: Sun, 03 Jun 2012 07:13:43 GMT Content-Type: text/javascript; charset=UTF-8 Transfer-Encoding: chunked Connection: keep-alive Vary: Accept-Encoding Cache-Control: private, must-revalidate, max-age=300 Last-Modified: Sun, 03 Jun 2012 07:07:13 GMT Content-Encoding: gzip Any suggestions?

    Read the article

  • Where should I put zoomIn in my MapActivity?

    - by Johny
    I'm writing an Android app, and I'd like to zoomIn as soon as the map has been loaded. I get the following error: java.lang.IllegalArgumentException: width and height must be > 0 This MapActivity - width and height must be > 0 question suggests the problem is the zoomIn() method is in the onCreate() method. But I get same error when I put it in the onResume() method. I've been searching for hours and I can't find anything about it at http://developer.android.com or anywhere else... Also I can't find a way to get the time point the map has been loaded. A "MapLoadedListener" or something like that... EDIT Here is my code: public class AMap extends MapActivity{ private final String LOG_TAG = this.getClass().getSimpleName(); private Context mContext; private Chronometer timer; private TextView tvCountdown; private RelativeLayout rl; private MapView mapView; private MapController mapController; private List<Overlay> mapOverlays; private PlayersOverlay playersOverlay; private Drawable drawable; private Builder endDialog; private ContextThemeWrapper ctw; private Handler mHandler = new Handler(); private Player player = new Player(); private StartTask startTask; private EndTask endTask; private MyDBAdapter mdba; private Cursor playersCursor; private UpdateBroadcastReceiver r; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.map_view); mContext = AMap.this; // set map mapView = (MapView) findViewById(R.id.mapview); mapView.setBuiltInZoomControls(true); mapView.setFocusable(true); // find the relative layout rl = (RelativeLayout) findViewById(R.id.rl); // set the chronometer timer = (Chronometer) findViewById(R.id.tv_timer); timer.setBackgroundColor(Color.DKGRAY); // set the countdown textview tvCountdown = (TextView) findViewById(R.id.tv_countdown); // Open DB connection and get players Cursor mdba = new MyDBAdapter(mContext); mdba.open(); playersCursor = mdba.getGame(); // Get this player's id and location Intent starter = this.getIntent(); player.setId(starter.getIntExtra("id", 0)); player.setLatitude(starter.getDoubleExtra("lat", 0)); player.setLongitude(starter.getDoubleExtra("lon", 0)); // Set this player's location as map's center GeoPoint geoPoint = new GeoPoint((int) (player.getLatitude()*1E6), (int) (player.getLongitude()*1E6)); mapController = mapView.getController(); mapController.setCenter(geoPoint); mapController.setZoom(15); Log.d(LOG_TAG, "My playersCursor has "+playersCursor.getCount()+" rows"); // drawable is needed but not used drawable = this.getResources().getDrawable(R.drawable.ic_launcher); // set PlayersOverlay (locations and statuses) playersOverlay = new PlayersOverlay(player.getId(), playersCursor, drawable, this); mapOverlays = mapView.getOverlays(); mapOverlays.add(playersOverlay); mHandler.postDelayed(mUpdateTimeTask, 100); } private Runnable mUpdateTimeTask = new Runnable() { public void run() { int h = mapView.getLayoutParams().height; int w = mapView.getLayoutParams().width; Log.d(LOG_TAG, "w = "+w+" , h = "+h); mHandler.postAtTime(this, System.currentTimeMillis() + 1000); } }; @Override public void onAttachedToWindow(){ Log.d(LOG_TAG, "Attached to Window"); int h = mapView.getLayoutParams().height; int w = mapView.getLayoutParams().width; Log.d(LOG_TAG, " Attached to window: w = "+w+" , h = "+h); //mapController.zoomInFixing(screenPoint.x, screenPoint.y); } public void onWindowFocusChanged(boolean hasFocus){ Log.d(LOG_TAG, "Focus changed to: "+hasFocus); int h = mapView.getLayoutParams().height; int w = mapView.getLayoutParams().width; Log.d(LOG_TAG, " Window focus changed: w = "+w+" , h = "+h); //mapController.zoomInFixing(screenPoint.x, screenPoint.y); } @Override protected void onStart(){ super.onStart(); // Create and register the broadcast receiver for messages from service IntentFilter filter = new IntentFilter(AppConstants.iGAME_UPDATE); r = new UpdateBroadcastReceiver(); registerReceiver(r, filter); // Create the dialog for end of game ctw = new ContextThemeWrapper(mContext, android.R.style.Theme_Translucent_NoTitleBar_Fullscreen); endDialog = new AlertDialog.Builder(ctw); endDialog.setMessage("End of Game"); endDialog.setCancelable(false); endDialog.setNeutralButton("OK", new OnClickListener(){ @Override public void onClick(DialogInterface dialog, int which) { Intent highScores = new Intent(AMap.this, HighScores.class); startActivity(highScores); playersCursor.close(); finish(); } }); } @Override protected void onStop() { if(!playersCursor.isClosed()) playersCursor.close(); unregisterReceiver(r); mdba.close(); super.onStop(); } @Override protected boolean isRouteDisplayed() { return false; } // Receives signal from NetworkService that DB has been updated public class UpdateBroadcastReceiver extends BroadcastReceiver { boolean startSignal, update, endSignal; @Override public void onReceive(Context context, Intent intent) { endSignal = intent.getBooleanExtra("endSignal", false); if(endSignal){ Log.d(LOG_TAG, "Game Update BroadcastReceiver received End Signal"); endTask = new EndTask(); endTask.execute(); return; } update = intent.getBooleanExtra("update", false); if(update){ Log.d(LOG_TAG, "Game Update BroadcastReceiver received game update"); playersCursor.requery(); mapView.invalidate(); return; } startSignal = intent.getBooleanExtra("startSignal", false); if(startSignal){ Log.d(LOG_TAG, "Game Update BroadcastReceiver received Start Signal"); startTask = new StartTask(); startTask.execute(); return; } } } class StartTask extends AsyncTask<Void,Integer,Void>{ private final ToneGenerator tg = new ToneGenerator(AudioManager.STREAM_NOTIFICATION, 100); private final long DELAY = 1200; @Override protected Void doInBackground(Void... params) { int i = 3; while(i>=0){ publishProgress(i); try { Thread.sleep(DELAY); } catch (InterruptedException e) { e.printStackTrace(); } i--; } return null; } @Override protected void onProgressUpdate(Integer... progress){ tg.startTone(ToneGenerator.TONE_PROP_PROMPT); tvCountdown.setText(""+progress[0]); } @Override protected void onPostExecute(Void result) { rl.removeView(tvCountdown); timer.setBase(SystemClock.elapsedRealtime()); timer.start(); //enable screen touches playersOverlay.setGameStarted(true); } } class EndTask extends AsyncTask<Void,Void,Void>{ @Override protected void onPreExecute(){ //disable screen touches playersOverlay.setEndOfGame(true); timer.stop(); } @Override protected Void doInBackground(Void... params) { return null; } @Override protected void onPostExecute(Void result) { try{ endDialog.show(); }catch(Exception e){ Toast.makeText(mContext, "End of game", Toast.LENGTH_LONG); Intent highScores = new Intent(AMap.this, HighScores.class); startActivity(highScores); playersCursor.close(); finish(); } mHandler.removeCallbacks(mUpdateTimeTask); } } }

    Read the article

  • LuaEdit can't find module when Lua files all in the same folder

    - by joverboard
    I downloaded LuaEdit to use as an IDE and debug tool however I'm having trouble using it for even the simplest things. I've created a solution with 2 files in it, all of which are stored in the same folder. My files are as follows: --startup.lua require("foo") test("Testing", "testing", "one, two, three") --foo.lua foo = {} print("In foo.lua") function test(a,b,c) print(a,b,c) end This works fine when in my C++ compiler when accessed through some embed code, however when I attempt to use the same code in LuaEdit, it crashes on line 3 require("foo") with an error stating: module 'foo' not found: no field package.preload['foo'] no file 'C:\Program Files (x86)\LuaEdit 2010\lua\foo.lua' no file 'C:\Program Files (x86)\LuaEdit 2010\lua\foo\init.lua' no file 'C:\Program Files (x86)\LuaEdit 2010\foo.lua' no file 'C:\Program Files (x86)\LuaEdit 2010\foo\init.lua' no file '.\foo.lua' no file 'C:\Program Files (x86)\LuaEdit 2010\foo.dll' no file 'C:\Program Files (x86)\LuaEdit 2010\loadall.dll' no file '.\battle.dll' I have also tried creating these files prior to adding them to a solution and still get the same error. Is there some setting I'm missing? It would be great to have an IDE/debugger but it's useless to me if it can't run linked functions.

    Read the article

  • How to move a google doc into a folder using Zend Gdata

    - by Andre
    Hi Guys I am really struggling with moving a document from my root folder to another folder using zend gdata here is how i am trying to do it, but its not working. $service = Zend_Gdata_Docs::AUTH_SERVICE_NAME; $client = Zend_Gdata_ClientLogin::getHttpClient($gUser, $gPass, $service); $link = "https://docs.google.com/feeds/documents/private/full/spreadsheet:0AUFNVEpLOVg2U0E"; // Not real id for privacy purposes $docs = new Zend_GData_Docs($client); // Attach a category object of folder to this entry // I have tried many variations of this including attaching label categories $cat = new Zend_Gdata_App_Extension_Category('My Folder Name','http://schemas.google.com/docs/2007#folder'); $entry = $docs->getDocumentListEntry($link); $entry->setCategory(array($cat)); $return = $docs->updateEntry($entry,$entry->getEditLink()->href); When I run this I get No errors, but nothing seems to change, and the return data does not contain the new category. EDIT: Ok I realised that its not the category but the link that decides which "collection" (folder) a resource belongs too. https://developers.google.com/google-apps/documents-list/#managing_collections_and_their_contents says that each resource has as et of parent links, so I tried changing my code to do set link instead of set category, but this did not work. $folder = "https://docs.google.com/feeds/documents/private/full/folder%3A0wSFA2WHc"; $rel = "http://schemas.google.com/docs/2007#parent"; $linkObj = new Zend_Gdata_App_Extension_Link($folder,$rel,'application/atom+xml', NULL,'Folder Name'); $links = $entry->getLink(); array_push($links,$linkObj); $entry->setLink($links); $return = $docs->updateEntry($entry,$entry->getEditLink()->href); EDIT: SOLVED [nearly] OK Here is how to move/copy, sort of, from one folder to another: simpler than initially thought, but problem is it creates a reference and NOT a move! It now in both places at the same time.... // Folder you wnat to move too $folder = "https://docs.google.com/feeds/folders/private/full/folder%asdsad"; $data = $docs->insertDocument($entry, $folder); // Entry is the entry you want moved using insert automatically assigns link & category for you...

    Read the article

  • Apache HTTP Server+Tomcat: Which file generates mod_jk.conf, how to modify generated stuff, and how does httpd reach it?

    - by Sk8erPeter
    I'm using XAMPP with Apache HTTP Server and Tomcat Add-On installed. There's a default mod_jk.conf which is generated by Tomcat when starting it. But which file generates this mod_jk.conf file? How can I modify default values? By default, it looks like this: pastebin - mod_jk.conf. How does Apache HTTP Server reach this file? I can't see any reference to this file when looking into httpd.conf. When I put a VirtualHost in my httpd.conf file, and I put the line JkMount /* ajp13 into it, Apache HTTP Server service can't start (causes a 7024 event id error in Event Viewer (with error code 1, but nothing specific), but puts no error messages into error.log. The VirtualHost looks like this: pastebin - VirtualHost + JkMount. This way Apache HTTP Server can not start. If I comment out the line JkMount /* ajp13, it starts without a problem. BUT if I put the following line, which is the same as in mod_jk.conf, before the mentioned VirtualHost again, the service can start! <IfModule !mod_jk.c LoadModule jk_module "C:/xampp/tomcat/xampp/apache/modules/mod_jk.so" </IfModule Why do I have to put this line in again? Why does that happen, that the http://localhost/example does work, so this query is redirected to AJP13, but I have to put the LoadModule line in again in another file? EDIT: I don't have a clue why, I surely modified something, but now /example doesn't work either... And the config above gives a 500 Internal Server Error... :S Thanks!

    Read the article

  • Access forbidden! using xampp on macosx 10.5

    - by erikvold
    I installed xampp back around January 2009, and CF8 to test coldfusion on my macbook (note: I do not think that this issue is related to CF, but only xampp). I only ever used the apache part of xampp, and this was working for over a year. In the last couple of months at the most I've started getting the following error message (even for none CF sites, and non .cfm pages, the error occurs for .html files..): Access forbidden! You don't have permission to access the requested object. It is either read-protected or not readable by the server. If you think this is a server error, please contact the webmaster Error 403 erikvold.lan Sun Mar 21 20:58:45 2010 Apache/2.2.11 (Unix) DAV/2 mod_ssl/2.2.11 OpenSSL/0.9.7l PHP/5.2.9 mod_perl/2.0.4 Perl/v5.10.0 As far as I recall I haven't made any change, so it's like it was working for a year then just stopped working..

    Read the article

  • Modifying the initrd.img to run additional binaries in a PXE booted RHEL 6

    - by Charles Long
    I am trying to add additional automation to our existing RHEL 6 (or Oralce's implementation thereof) PXE install process by running a script in the %pre section of my kickstart config that call hpacucli, HP's raid device configuration binary. My approach has been to modify the PXE served initrd.img. I've unpacked the initrd.img and copied in the required libraries, binaries, and scripts but when the system boots using the modified initrd.img, the modified /lib (and /lib_64) are moved aside to /lib_old and /lib is linked to the /mnt/runtime/lib. How can I change this configuration so that the /lib is not moved (unlikely) or required libraries are available in the runtime /mnt/runtime/lib? To test and confirm this I've been able to get the install process to move to the 6th virtual console, which allows me to see errors, and then open a shell (a useful debugging mechanism). %pre exec /dev/tty6 2 /dev/tty6 chvt 6 /bin/sh

    Read the article

  • Centos Xen resizing DomU partition and volume group

    - by thepearson
    I have a setup like so: Dom0 LV | DomU Physical Disk | | XVDA1 XVDA2 (/boot) (DomU PV) | VolGroup00 (DomU VG) | | LogVol00 LogVol01 (swap) (/) I am trying to resize the DomU root Filesystem. (VolGroup00-LogVol01) I realize that I now need to resize the partition XVDA2, however when I try doing this with parted on Dom0 it just tells me "Error: Could not detect file system." So to resize the root part VolGroup-LogVol00 shouldn't the process be: # Shut down DomU xm shutdown domU #Resize Dom0 Logical volume lvextend -L+2G /dev/volumes/domU-vol # Parted parted /dev/volumes/domU-vol # Resize root partition resize 2 START END (This is where I get an error) "Error: Could not detect file system." # add the vm volume group to Dom0 lvm kpartx -a /dev/volumes/domU-vol # resize the domU PV pvresize /dev/mapper/domU-pl (as listed in pvdisplay) # The domU volume group should automatically adjust # resize the DomU lv lvextend -L+2G /dev/VolGroup/LogVol00 And then obviously increase the fs, remove the device from kpartx etc The problem is I dont know how to resize the partition? How do I resize this partition so I can run pvresize on the DomU? Thanks

    Read the article

  • php.ini use multiple include paths - openbasedir restriction

    - by hfidgen
    I need to allow an include path for a vhost subdomain on Plesk 10. I've edited the PHP PEAR path into /etc/php.ini as I'm happy for it to be globally available: include_path = ".:/usr/share/pear/" This works insofar as PHP is able to see the files in that directory when a script tries to include them, but I'm getting the dreaded openbasedir error: Warning: require_once() [function.require-once]: open_basedir restriction in effect. File(/usr/share/pear/xxxx.php) is not within the allowed path(s): (/var/www/vhosts/xxxx.com/subdomains/test/httpdocs/:/tmp/) Am I right in saying that the subdomain or main domain can have a vhost.conf file in which I can alter the openbasedir allowed paths? I've tried searching out solutions but I'm afraid I can't quite see one yet :)

    Read the article

  • Strange ssh login

    - by Hikaru
    I am running debian server and i have received a strange email warning about ssh login It says, that user mail logged in using ssh from remote address: Environment info: USER=mail SSH_CLIENT=92.46.127.173 40814 22 MAIL=/var/mail/mail HOME=/var/mail SSH_TTY=/dev/pts/7 LOGNAME=mail TERM=xterm PATH=/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games LANG=en_US.UTF-8 SHELL=/bin/sh KRB5CCNAME=FILE:/tmp/krb5cc_8 PWD=/var/mail SSH_CONNECTION=92.46.127.173 40814 my-ip-here 22 I looked in /etc/shadow and find out, that password for is not set mail:*:15316:0:99999:7::: I found this lines for login in auth.log n 3 02:57:09 gw sshd[2090]: pam_winbind(sshd:auth): getting password (0x00000388) Jun 3 02:57:09 gw sshd[2090]: pam_winbind(sshd:auth): pam_get_item returned a password Jun 3 02:57:09 gw sshd[2091]: pam_winbind(sshd:auth): user 'mail' granted access Jun 3 02:57:09 gw sshd[2091]: Accepted password for mail from 92.46.127.173 port 45194 ssh2 Jun 3 02:57:09 gw sshd[2091]: pam_unix(sshd:session): session opened for user mail by (uid=0) Jun 3 02:57:10 gw CRON[2051]: pam_unix(cron:session): session closed for user root and lots of auth failures for this user. There is no lines with COMMAND string for this user. Nothing was found with "rkhunter" and with "ps aux" process inspection, also there is no suspicious connections was found with "netstat" (as I can see) Can anyone tell me how it is possible and what else should be done? Thanks in advance.

    Read the article

  • Have some questions about setting up a VPN to my private cloud servers

    - by Pure.Krome
    I've got a number of Virtual Servers running at a pretty big Cloud provider. They are all running Windows 2008 R2. I have a CISCO ASA firewall in front of them. Currently, I've got all ports blocked except 80/443/21/3386 (for Remote Desktop). I asked to have a VPN enabled on the firewall and they said it's easy to do BUT I need to use the 3rd party Cisco software. Now, I don't want to get into a debate about it .. but we don't want to install anything extra on our -client- computers. We all use Windows 7 and we love using the built in VPN client to connect to other private LANS we have setup in other locations. So i'm wondering what options I have to create a VPN tunnel to our private cloud LAN? All our cloud servers are part of WORKGROUP, so there's no Active Directory .. nor do we want to install all that. Secondly, we know we can open up a firewall port - so any ports for starting a VPN is fine! Lastly, I was thinking of just using one of the existing servers as the VPN server (and using the Windows VPN software) .. but I'm not sure this is a good thing? Remember - we just want to use the baked in VPN software in Windows 7 .. which is PPTP or SSTP or L2TP/IPSEC. I would -LOVE- to use some free OSS software. For usernames/passwords? We'd probably just have one account .. like U:Hithere P:whatever.. so we don't need any hardcore account management, like Active Directory, etc. So does anyone have any ideas?

    Read the article

  • Ubuntu 12.04 cloud edition on Amazon - Apache2 - /etc

    - by jdog
    I have setup a web server on Amazon with 3 Virtual hosts. For some reason I can't get any of the sites going on it, they all show a 404 error. /var/log/apache2/error.log shows "File does not exist: /etc/apache2/htdocs" I have checked: a2ensite all my virtual hosts actually checked softlinks in sites-enabled access rights in /var/www to 777, in case user is not www-data grep -r htdocs /etc/apache2 (returns nothing) ports.conf has NameVirtualHost directive exactly matching Virtual Hosts What else could this be? ports.conf # If you just change the port or add more ports here, you will likely also # have to change the VirtualHost statement in # /etc/apache2/sites-enabled/000-default # This is also true if you have upgraded from before 2.2.9-3 (i.e. from # Debian etch). See /usr/share/doc/apache2.2-common/NEWS.Debian.gz and # README.Debian.gz NameVirtualHost 107.20.169.163:80 Listen 80 <IfModule mod_ssl.c> # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to <VirtualHost *:443> # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> sites-available/www.seleconlight.com <VirtualHost 107.20.169.163:80> ServerName www.seleconlight.com DocumentRoot /var/www/www.seleconlight.com CustomLog /var/log/apache2/www.seleconlight.com-access.log combined ErrorLog /var/log/apache2/www.seleconlight.com-error.log </VirtualHost>

    Read the article

  • ssh crashes connecting using host names on windows

    - by AliGibbs
    On a new install of Windows Server 2008, I attempting to use ssh to connect to another host. I have installed putty/openssh. This works without a problem when trying a command such as: ssh 192.168.0.2 However, this will crash when trying something like: ssh testserver with the error as follows in the windows event viewer: Faulting application ssh.exe, version 0.0.0.0, time stamp 0x40843497, faulting module kernel32.dll, version 6.0.6001.18000, time stamp 0x4791a76d, exception code 0xc0000005, fault offset 0x0004bbb8, process id 0xe94, application start time 0x01cb873195e795d5. Any suggestions? thanks in advance

    Read the article

  • Private cloud solution [Eucalyptus,OpenStack, Nimbus] for Java deployments [Glassfish, Tomcat]

    - by Tadas D.
    I am interested in a way to have private cloud which would host Glassfish (or Tomcat) server. Which option from Eucalyptus, Openstack or Nimbus would be best to deploy java applications on it? Or maybe there is something other and I am looking wrong at the problem? The way I imagine this, that I should have some shared storage that I could expand by introducing new nodes to this cluster and have easy management for glassfish instances: something like virtual machines images that I can start and stop on demand and that image is shared among nodes. I don't need concrete step-by-step solution here but guidelines how this should be done are very welcome.

    Read the article

  • Free / Cached / Available memory on Linux

    - by pkoraca
    I have read that linux uses free memory for caching, to make system faster. However, both Nagios and Paessler PRTG monitoring system show me that my memory usage is critical. I could change Nagios mem_usage script to sum free and cached memory, but would that be correct information? I doubt that they misunderstood Linux memory usage. Lets say I have 8 GB RAM. 5 GB are used, 2 GB is cached, and I have 1 GB of free memory. Real available memory should be free+cached (3 GB)? If some new application would need additional 3 GB RAM, could it take everything from cache and free without using swap, or is there a minimum that should be in cache? Real example: $ cat /proc/meminfo MemTotal: 5984256 kB MemFree: 137052 kB Buffers: 140484 kB Cached: 3439616 kB SwapCached: 244 kB Active: 3148824 kB Inactive: 2341768 kB ... My monitoring tools show that I have 137 MB free RAM, however I have ~3,5 GB in Cache. Thanks!

    Read the article

  • How do i mitigate DDOS attacks on static servers?

    - by acidzombie24
    Here is a slightly different take on DDOS attacks. Rather than a server with dynamic content being attack i was curious how to deal with attacks on servers with STATIC CONTENT. This means cpu tends to not be an issue. Its either bandwidth or connection problems. How would i mitigate a DDOS attack knowing nothing about the attacker (for example country, ip address or anything else). I was wondering is shorting the timeout and increasing amount of connections is an acceptable solution? Or maybe that is completely useless? Also i would limit the amount of connections per IP address. Would the above help or be pointless? Keeping in mind everything is static checking for multiple request of the same page (html, css, js, etc) could be a sign of a attack. What are some measures i can take on a static content server?

    Read the article

  • SSO "Portal"

    - by Clinton Blackmore
    Pursuant to my question on alleviating the password explosion, I've contacted some of the services to whom we are paying money to access their websites to ask if we could authenticate our own users, and some of them said yes and send me specs on how to do so. (One of the sites called such a system a page a "portal"; I've never heard the term used in quite that way.) It is simple enough that I am tempted to roll my own. The largest complication is that one site wants us to store a key for every user in our database (and I think the LDAP database makes sense) after their initial login. So, non-trivial, but doable. The nature of these sorts of tasks, I expect, is that if they start out small and simple, they don't end that way. There must be some software that addresses this that is readily extended, surely. In my searching, I've come across: SimpleSAMLphp JOSSO RubyCAS-Server Shibboleth Pubcookie OpenID [Wow, gee. I'd missed some of those in my previous searches! The wikipedia page on Central Authentication Services is useful, and the section on Alternatives to OpenID makes it look like there is a lot of choice.] Can anyone recommend any of these, or suggest ones to avoid? Internally, we are authenticating using Apple's Open Directory [ == OpenLDAP + Kerberos + Password Server (which, I believe, == SAML) ]. As far as extending/tweaking/advanced configuration of a system, I am able to program in Python, C++, can do some basic PHP, and may be able to remember some Java. Looks like I need to pick up Ruby at some point. Addendum: I would also like users to be able to change their passwords over the web (and for certain users to change passwords of other users).

    Read the article

  • Installing chrome in Centos 6.2 (Final)

    - by usjes
    I need to install chrome in a dedicated centos server where I only access via ssh, it doesn't have X or any windows graphical stuff. I need it to be able to pack extensions using google-chrome --pack-extension. I tried adding this to /etc/yum.repos.d/google.repo [google-chrome] name=google-chrome - 32-bit baseurl=http://dl.google.com/linux/chrome/rpm/stable/i386 enabled=1 gpgcheck=1 gpgkey=https://dl-ssl.google.com/linux/linux_signing_key.pub And then yum install google-chrome-stable, but there's a huge list of dependencies problems: How can I install chrome without breaking anything else? UPDATE: Ok, I installed perl-CGI from .rpm because yum couldn't find it, now dependencies resolve and it show me this list of packages to install: Dependencies Resolved ============================================================================================================================================================================================================================================= Package Arch Version Repository Size ============================================================================================================================================================================================================================================= Installing: google-chrome-stable x86_64 19.0.1084.52-138391 google-chrome 35 M Installing for dependencies: ConsoleKit x86_64 0.4.1-3.el6 base 82 k ConsoleKit-libs x86_64 0.4.1-3.el6 base 17 k GConf2 x86_64 2.28.0-6.el6 base 964 k ORBit2 x86_64 2.14.17-3.1.el6 base 168 k bc x86_64 1.06.95-1.el6 base 110 k cdparanoia-libs x86_64 10.2-5.1.el6 base 47 k cups x86_64 1:1.4.2-44.el6_2.3 updates 2.3 M dbus x86_64 1:1.2.24-5.el6_1 base 207 k desktop-file-utils x86_64 0.15-9.el6 base 47 k ed x86_64 1.1-3.3.el6 base 72 k eggdbus x86_64 0.6-3.el6 base 91 k foomatic x86_64 4.0.4-1.el6_1.1 base 251 k foomatic-db noarch 4.0-7.20091126.el6 base 980 k foomatic-db-filesystem noarch 4.0-7.20091126.el6 base 4.4 k foomatic-db-ppds noarch 4.0-7.20091126.el6 base 19 M ghostscript x86_64 8.70-11.el6_2.6 updates 4.4 M ghostscript-fonts noarch 5.50-23.1.el6 base 751 k gstreamer x86_64 0.10.29-1.el6 base 764 k gstreamer-plugins-base x86_64 0.10.29-1.el6 base 942 k gstreamer-tools x86_64 0.10.29-1.el6 base 23 k iso-codes noarch 3.16-2.el6 base 2.4 M lcms-libs x86_64 1.19-1.el6 base 100 k libIDL x86_64 0.8.13-2.1.el6 base 83 k libXScrnSaver x86_64 1.2.0-1.el6 base 19 k libXfont x86_64 1.4.1-2.el6_1 base 128 k libXv x86_64 1.0.5-1.el6 base 21 k libfontenc x86_64 1.0.5-2.el6 base 24 k libgudev1 x86_64 147-2.40.el6 base 59 k libmng x86_64 1.0.10-4.1.el6 base 165 k libogg x86_64 2:1.1.4-2.1.el6 base 21 k liboil x86_64 0.3.16-4.1.el6 base 121 k libtheora x86_64 1:1.1.0-2.el6 base 129 k libvisual x86_64 0.4.0-9.1.el6 base 135 k libvorbis x86_64 1:1.2.3-4.el6_2.1 updates 168 k mailx x86_64 12.4-6.el6 base 234 k man x86_64 1.6f-29.el6 base 263 k mesa-libGLU x86_64 7.11-3.el6 base 201 k nvidia-graphics195.30-libs x86_64 195.30-120.el6 atrpms 13 M openjpeg-libs x86_64 1.3-7.el6 base 59 k pax x86_64 3.4-10.1.el6 base 69 k phonon-backend-gstreamer x86_64 1:4.6.2-20.el6 base 125 k polkit x86_64 0.96-2.el6_0.1 base 158 k poppler x86_64 0.12.4-3.el6_0.1 base 557 k poppler-data noarch 0.4.0-1.el6 base 2.2 M poppler-utils x86_64 0.12.4-3.el6_0.1 base 73 k portreserve x86_64 0.0.4-4.el6_1.1 base 22 k qt x86_64 1:4.6.2-20.el6 base 4.0 M qt-sqlite x86_64 1:4.6.2-20.el6 base 50 k qt-x11 x86_64 1:4.6.2-20.el6 base 12 M qt3 x86_64 3.3.8b-30.el6 base 3.5 M redhat-lsb x86_64 4.0-3.el6.centos base 24 k redhat-lsb-graphics x86_64 4.0-3.el6.centos base 12 k redhat-lsb-printing x86_64 4.0-3.el6.centos base 11 k sgml-common noarch 0.6.3-32.el6 base 43 k time x86_64 1.7-37.1.el6 base 26 k tmpwatch x86_64 2.9.16-4.el6 base 31 k xdg-utils noarch 1.0.2-17.20091016cvs.el6 base 58 k xml-common noarch 0.6.3-32.el6 base 9.5 k xorg-x11-font-utils x86_64 1:7.2-11.el6 base 75 k xz x86_64 4.999.9-0.3.beta.20091007git.el6 base 137 k xz-lzma-compat x86_64 4.999.9-0.3.beta.20091007git.el6 base 16 k Transaction Summary ============================================================================================================================================================================================================================================= Install 62 Package(s) Is it safe to continue and install all that or could I break something already installed?

    Read the article

  • Wired and wireless conections: force Windows to connect to laptop through Ethernet?

    - by danielkza
    I have a desktop connected to the internet and to my home network through Wi-Fi, and a latptop connected to said desktop through an Ethernet cable. But Windows seems to only reach the laptop through Wi-Fi: I want to transfer files through the wired connection instead. Setting up Internet Connectin Sharing and disconnecting the laptop from Wi-Fi altogether doesn't seem like the most elegant solution to me. I also thought about going to the hosts file and setting up the IP address manually, but that would make the laptop completely unavailable if it's not wired, which happens quite often unfortunately. Is there any way for me to tell Windows to use the wired connection for a particular host if possible, and fallback to any other route it finds otherwise?

    Read the article

  • How to make fonts smooth and readable in Debian/Ubuntu?

    - by jmdeldin
    What is the best, most foolproof way of getting nice font rendering in Linux? Currently, I am experiencing thin, ugly fonts (shown below). I have wasted too much time tweaking fonts.conf, and I have yet to find a decent combination. I am running Debian 6.0 with no desktop environment (just Openbox for a window manager) in a VM on a Macbook Pro (OS X 10.7.4). Screenshots The following screenshots were taken without fonts.conf and .Xdefaults tweaks. running in "native" Openbox environment: http://i.imgur.com/10bnH.png running over X11, which looks a little worse than Openbox: http://i.imgur.com/sq8jk.png Thank you!

    Read the article

  • Hidden bootloader

    - by Jack
    I need a bootloader that will work as described: I want my computer to boot Windows, that is my main OS installed on a primary bootable partition. However, I'd like to have a 2-3 second span with blinking cursor, before Windows starts. If I press any key in that period it should launch Ubuntu from a small Truecrypt-encoded partition, upon providing a correct password. In other words I'm looking for a hidden bootloader that would expose itself only when a key is pressed during a certain time. Do you happen to know anything like that?

    Read the article

  • How to create hyperlink to legacy application in Lotus Notes

    - by Thorbjørn Ravn Andersen
    We have a legacy application in Lotus Notes which I occasionally need to direct others to through either email or a web page. I've had a look and Notes supports right-click-Copy as link which gives me the following on the clipboard: TITLE <NDL> <REPLICA 41256489:003B32D7> <VIEW OF23697E95:6CDA5D6D-ON412564C7:00553BC3> <NOTE OF6BCA8821:34ABD6F6-ONC12577C8:0034BEF2> <HINT>CN=XXX/O=YYY</HINT> <REM>....</REM> </NDL> (slightly anonymized). How can I create a hyperlink which - when clicked - allow others to open Notes to this location? Note: We run 5.0.11.

    Read the article

  • Very long DNS lookups inside my network

    - by Nuno Cordeiro
    Ever since I installed DD-WRT (v24-sp2 08/07/10 std-usb-ftp) on my router (RT-N16), my browsing got substantially slower. Using FirePHP I figured out that it's being caused by VERY long DNS lookups (~30 seconds). When the domain name was very recently accessed then speed is very good. I tried changing DNS on the computer and I tried messing around with the options on DD-WRT. I have tried to configure the router with Google DNS and/or OpenDNS. My current DNS output after using ipconfig -all is: 192.168.1.1 208.67.220.220 8.8.8.8 208.67.222.222 Can someone help me debug and solve this problem? I'd like to snoop the requests themselves. How can I know which DNS requests are being sent and which are failing/succeeding? Note: I don't expect this to be relevant but my router is connected to the internet through an ONT.

    Read the article

  • Is my Power Supply Unit fried?

    - by Rob
    So my laptop just started smoking where I plug my charger in. I run a netbook, the Acer Aspire One. My charger won't charge it, because when I plug my charger into the netbook, the charging light that indicates the netbook is receiving power turns off. Is there anything I can do to troubleshoot where the problem is and what should I do now? Is just my charger fried and should I replace it. Or could there also be a problem with my netbook and do I need to look for other problems?

    Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >