Monthly Archives

Articles indexed in November 2012

Page 441/450 | < Previous Page | 437 438 439 440 441 442 443 444 445 446 447 448  | Next Page >

  • Ruby does not run code correctly

    - by seefour
    I run this basic code in Ruby (on Windows): def hello () puts 'test' end hello and the Interpreter throws me this error: app.ru:1: syntax error, unexpected tIDENTIFIER, expecting $end hello puts 'test' It seems like Ruby is skipping lines? I've tried various encoding formats, other code and it still gives me an error similar to this. Why is it happening? EDIT The suggestions were to either use different editors or semi-colons to see if the lines were an issue. The version is also new - 1.9.3p327, so that shouldn't have been a problem. Parentheses aren't a problem either.

    Read the article

  • C# - Coding a nested stateflow diagram

    - by weberc2
    I have the following state diagram. I know how to make a simple state machine that transitions between non-nested states; however, I don't know how to transition between nested states. Could someone explain how to do this at an appropriately high level (i.e., you don't need to write the code for me--unless you're feeling particularly generous :P). State Diagram [EDIT: The bottom "A", "C", and "E" should be "B", "D", and "F" respectively; sorry!] What I know how to do public class MyState : State // State enumeration { public static MyState A = new MyState("State A"); public static MyState B = new MyState("State B"); public static MyState C = new MyState("State C"); public static MyState D = new MyState("State D"); public static MyState E = new MyState("State E"); public static MyState F = new MyState("State F"); public static MyState NEUT = new MyState("Neutral"); public static MyState P = new MyState("P"); protected MyState(string name) : base(name) { } } public class MyEvent : Event // Event enumeration { public static MyEvent X_POS = new MyEvent("X+"); public static MyEvent X_NEG = new MyEvent("X-"); public static MyEvent Y_POS = new MyEvent("Y+"); public static MyEvent Y_NEG = new MyEvent("Y-"); protected MyEvent(string name) : base(name) { } } public class MyStateMachine : StateMachine<MyState, MyEvent> // State Machine implementation { public MyStateMachine() : base(MyState.P) // MyState.P = initial state { // Set up the transition table // P this.addTransition(MYState.P, MyState.NEUT, MyEvent.Y_NEG); // NEUTRAL this.addTransition(MyState.NEUT, MyState.P, MyEvent.Y_POS); this.addTransition(MyState.NEUT, MyState.A, MyEvent.Y_NEG); this.addTransition(MyState.NEUT, MyState.B, MyEvent.Y_POS); this.addTransition(MyState.NEUT, MyState.C, MyEvent.Y_NEG); this.addTransition(MyState.NEUT, MyState.D, MyEvent.Y_POS); this.addTransition(MyState.NEUT, MyState.E, MyEvent.Y_NEG); this.addTransition(MyState.NEUT, MyState.F, MyEvent.Y_POS); // A this.addTransition(MyState.A, MyState.NEUT, MyEvent.Y_POS); // B this.addTransition(MyState.B, MyState.NEUT, MyEvent.Y_NEG); // C this.addTransition(MyState.C, MyState.NEUT, MyEvent.Y_POS); // D this.addTransition(MyState.D, MyState.NEUT, MyEvent.Y_NEG); // E this.addTransition(MyState.E, MyState.NEUT, MyEvent.Y_POS); // F this.addTransition(MyState.F, MyState.NEUT, MyEvent.Y_NEG); } public void move(MyEvent eevent) { try { this.moveNext(eevent); } catch (Exception e) { } } }

    Read the article

  • Bash script "read" not pausing for user input when executed from SSH shell

    - by Aaron Hancock
    I'm new to Bash scripting, so please be gentle. I'm connected to a Ubuntu server via SSH (PuTTY) and when I run this command, I expect the bash script that downloads and executes to allow user input and then echo that input. It seems to just write out the echo label for the input request and terminate. wget -O - https://raw.github.com/aaronhancock/pub/master/bash/readtest.sh | bash Any clue what I might be doing wrong? UPDATE: This bash command does exactly what I wanted bash <(wget -q -O - https://raw.github.com/aaronhancock/pub/master/bash/readtest.sh)

    Read the article

  • pyramid view redirection

    - by ascobol
    This question title may be slightly incorrect but I could not find a better one (yet). I'm trying to integrate Mozilla Persona (browserid) into a Pyramid application. The login process is: user can login on any page by clicking on the login button a popup then shows a login form when the users enters correct login/password, an ajax call is made by the popup to a pyramid view that checks users credentials, and calls pyramid remember function if the check succeeded the browserid javascript code then reloads the current page Now I want to handle the case of a new user subscribing to the web app and present a new view asking for a few more details (desired username, etc) Since the "remember" function is called by an ajax call from the popup, I cannot redirect the user the the "/newuser" page. So every view needs to redirect new users to the "/newuser" url whenever the remembered browserid has no corresponding user in the database. Is there a way to intercept user requests before calling a view to call the "new_user" view instead ? Or maybe my authentication approach is fundamentally incorrect and I should rely on another approach ?

    Read the article

  • Convert VBA to VBS

    - by dnLL
    I have a little VBA script with some functions that I would like to convert to a single VBS file. Here is an example of what I got: Private Declare Function GetPrivateProfileString Lib "kernel32" Alias "GetPrivateProfileStringA" (ByVal lpApplicationName As String, ByVal lpKeyName As Any, ByVal lpDefault As String, ByVal lpReturnedString As String, ByVal nSize As Long, ByVal lpFileName As String) As Long Private Function ReadIniFileString(ByVal Sect As String, ByVal Keyname As String) As String Dim Worked As Long Dim RetStr As String * 128 Dim StrSize As Long Dim iNoOfCharInIni As Integer Dim sIniString, sProfileString As String iNoOfCharInIni = 0 sIniString = "" If Sect = "" Or Keyname = "" Then MsgBox "Erreur lors de la lecture des paramètres dans " & IniFileName, vbExclamation, "INI" Access.Application.Quit Else sProfileString = "" RetStr = Space(128) StrSize = Len(RetStr) Worked = GetPrivateProfileString(Sect, Keyname, "", RetStr, StrSize, IniFileName) If Worked Then iNoOfCharInIni = Worked sIniString = Left$(RetStr, Worked) End If End If ReadIniFileString = sIniString End Function And then, I need to use this function to put some values in strings. VBS doesn't seem to like any of my var declaration ((Dim) MyVar As MyType). If I'm able to adapt that code to VBS, I should be able to do the rest of my functions too. How can I adapt/convert this to VBS? Thank you.

    Read the article

  • iOS - Application logging test and production code

    - by Peter Warbo
    I am doing a bunch of logging when I'm testing my application which is useful for getting information about variable state and such. However I have read that you should use logging sparsely in production code (because it can potentially slow down your application). But my question is now: if my app is in production and people are using it, whenever a crash (god forbid) occurs, how will I be able to interpret the crash information if I have removed the logging statements? Then I suppose I will only have a stacktrace for me to interpret? Does this mean I should leave logging in production code only WHERE it's really essential for me to interpret what has happened? Also how will the logging statements relate to the crash reports? Will they be combined? I'm thinking of using Flurry as analytics and crash reports...

    Read the article

  • How to include css in a hmvc setup in codeigniter

    - by tariq
    I have setup the combination Codeigniter + HMVC + Twitter Bootstrap using this tutorial. I have created two modules named app and session. The app module contains the twitter bootstrap sample. When I click on About link, a new login page is displayed which is the session module configured using <?php echo Modules::run('session/session/index'); ?> The problem I am facing is that when I include the twitter bootstrap in both the views, the app module gets realigned and corousal doesnt work. How do I get the CSS to work with the session module ?

    Read the article

  • Why can't I extract a C++ type from a Python type using boost::python::extractor?

    - by Robin
    I've wrapped a C++ class using Py++ and everything is working great in Python. I can instantiate the c++ class, call methods, etc. I'm now trying to embed some Python into a C++ application. This is also working fine for the most-part. I can call functions on a Python module, get return values, etc. The python code I'm calling returns one of the classes that I wrapped: import _myextension as myext def run_script(arg): my_cpp_class = myext.MyClass() return my_cpp_class I'm calling this function from C++ like this: // ... excluding error checking, ref counting, etc. for brevity ... PyObject *pModule, *pFunc, *pArgs, *pReturnValue; Py_Initialize(); pModule = PyImport_Import(PyString_FromString("cpp_interface")); pFunc = PyObject_GetAttrString(pModule, "run_script"); pArgs = PyTuple_New(1); PyTuple_SetItem(pArgs, 0, PyString_FromString("an arg")); pReturnValue = PyObject_CallObject(pFunc, pArgs); bp::extract< MyClass& > extractor(pReturnValue); // PROBLEM IS HERE if (extractor.check()) { // This check is always false MyClass& cls = extractor(); } The problem is the extractor never actually extracts/converts the PyObject* to MyClass (i.e. extractor.check() is always false). According to the docs this is the correct way to extract a wrapped C++ class. I've tried returning basic data types (ints/floats/dicts) from the Python function and all of them are extracted properly. Is there something I'm missing? Is there another way to get the data and cast to MyClass?

    Read the article

  • wamp magento no admin page

    - by Mortgage Ms
    I have a live magento website hosted in Bluehost, I just installed wamp and tried to clone the live website to local wamp server. After some configuration changed from live server to local, the site is working with no problem, however, there is no admin page! If I go to localhost/magento/admin, it takes me to 404 page and throw error: The requested URL /magento/admin was not found on this server. How do I fix this? Thanks lots. Server info: wampserver2.2e-php5.4.3-httpd2.2.22-mysql5.5.24-32b

    Read the article

  • Play! Framework - Can my view template be localised when rendering it as an AsyncResult?

    - by avik
    I've recently started using the Play! framework (v2.0.4) for writing a Java web application. In the majority of my controllers I'm following the paradigm of suspending the HTTP request until the promise of a web service response has been fulfilled. Once the promise has been fulfilled, I return an AsyncResult. This is what most of my actions look like (with a bunch of code omitted): public static Result myActionMethod() { Promise<MyWSResponse> wsResponse; // Perform a web service call that will return the promise of a MyWSResponse... return async(wsResponse.map(new Function<MyWSResponse, Result>() { @Override public Result apply(MyWSResponse response) { // Validate response... return ok(myScalaViewTemplate.render(response.data())); } })); } I'm now trying to internationalise my app, but hit the following error when I try to render a template from an async method: [error] play - Waiting for a promise, but got an error: There is no HTTP Context available from here. java.lang.RuntimeException: There is no HTTP Context available from here. at play.mvc.Http$Context.current(Http.java:27) ~[play_2.9.1.jar:2.0.4] at play.mvc.Http$Context$Implicit.lang(Http.java:124) ~[play_2.9.1.jar:2.0.4] at play.i18n.Messages.get(Messages.java:38) ~[play_2.9.1.jar:2.0.4] at views.html.myScalaViewTemplate$.apply(myScalaViewTemplate.template.scala:40) ~[classes/:na] at views.html.myScalaViewTemplate$.render(myScalaViewTemplate.template.scala:87) ~[classes/:na] at views.html.myScalaViewTemplate.render(myScalaViewTemplate.template.scala) ~[classes/:na] In short, where I've got a message bundle lookup in my view template, some Play! code is attempting to access the original HTTP request and retrieve the accept-languages header, in order to know which message bundle to use. But it seems that the HTTP request is inaccessible from the async method. I can see a couple of (unsatisfactory) ways to work around this: Go back to the 'one thread per request' paradigm and have threads block waiting for responses. Figure out which language to use at Controller level, and feed that choice into my template. I also suspect this might not be an issue on trunk. I know that there is a similar issue in 2.0.4 with regards to not being able to access or modify the Session object which has recently been fixed. However I'm stuck on 2.0.4 for the time being, so is there a better way that I can resolve this problem?

    Read the article

  • jQuery Validation 1.10 and MVC server-side errors

    - by sam360
    This feature used to work just fine on my website. If I added a custom error to ModelState, the input on the page would be marked as "input-validation-error" and the Html.ValidationMessage() would take care of rendering a span with the error message inside it. Due to incompatibility reasons we had to upgrade our jQuery Validation to 1.10: Now when I add a custom error to ModelState, I can debug and see that the HTML elements being rendered correctly, but as soon as the page load is completed, jQuery Validation removes the error message and set the "class" attribute of the input to "valid"! Has any one else come across this issue? UPDATE Testing further shows that the error message is shown on the screen until the field gains focus. As soon as the field gains focus jQuery Validation removes the customer server-side error message and marks the field as good.

    Read the article

  • Visual Studio 2012 won't start

    - by David Aleu
    I installed VS2012 Premium from our MSDN subscription and it was working fine the first couple of days but then I installed a few extensions I can't now start VS2012 and it gives the error: Faulting application name: devenv.exe, version: 11.0.50727.1, time stamp: 0x5011ecaa Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b8f Exception code: 0xc0000374 Fault offset: 0x000ce6c3 Faulting process id: 0xee8 Faulting application start time: 0x01cd89bb777fc1dd Faulting application path: C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\devenv.exe Faulting module path: C:\Windows\SysWOW64\ntdll.dll I'm running it on Windows 7 64 bit. I've tried to repair, uninstall and install again and nothing. I tried to restore to a previous restore system point but nothing. The extensions I installed I can remember: VS10x Code Map VSCommands Visual SVN Nuget manager (all the above my colleagues have it too and it works fine for them) and: Web Essentials Visual Studio Color Theme Editor SlowCheetah Mobile Ready HTML5 Questions are: Anyone else has had this problem? Is there a way I can uninstall extensions from a command line or software? (I removed the extensions folder but that doesn't do anything) Can I repair the "C:\Windows\SysWOW64\ntdll.dll"? Is it really a problem with this dll? I haven't been able to find any similar issue in other versions and because VS2012 is new doesn't seem to be much information either.

    Read the article

  • How to avoid mouse move on Touch

    - by VirtualBlackFox
    I have a WPF application that is capable of being used both with a mouse and using Touch. I disable all windows "enhancements" to just have touch events : Stylus.IsPressAndHoldEnabled="False" Stylus.IsTapFeedbackEnabled="False" Stylus.IsTouchFeedbackEnabled="False" Stylus.IsFlicksEnabled="False" The result is that a click behave like I want except on two points : The small "touch" cursor (little white star) appears where clicked an when dragging. Completely useless as the user finger is already at this location no feedback is required (Except my element potentially changing color if actionable). Elements stay in the "Hover" state after the movement / Click ends. Both are the consequences of the fact that while windows transmit correctly touch events, he still move the mouse to the last main-touch-event. I don't want windows to move the mouse at all when I use touch inside my application. Is there a way to completely avoid that? Notes: Handling touch events change nothing to this. Using SetCursorPos to move the mouse away make the cursor blink and isn't really user-friendly. Disabling the touch panel to act as an input device completely disable all events (And I also prefer an application-local solution, not system wide). I don't care if the solution involve COM/PInvoke or is provided in C/C++ i'll translate. If it is necessary to patch/hook some windows dlls so be it, the software will run on a dedicated device anyway. I'm investigating the surface SDK but I doubt that it'll show any solution. As a surface is a pure-touch device there is no risk of bad interaction with the mouse.

    Read the article

  • How does Backbone.js connect View to Model

    - by William Sham
    I am trying to learn backbone.js through the following example. Then I got stuck at the point ItemView = Backbone.View.extend why you can use this.model.get? I thought this is referring to the instance of ItemView that would be created. Then why would ItemView has a model property at all?!! (function($){ var Item = Backbone.Model.extend({ defaults: { part1: 'hello', part2: 'world' } }); var List = Backbone.Collection.extend({ model: Item }); var ItemView = Backbone.View.extend({ tagName: 'li', initialize: function(){ _.bindAll(this, 'render'); }, render: function(){ $(this.el).html('<span>'+this.model.get('part1')+' '+this.model.get('part2')+'</span>'); return this; } }); var ListView = Backbone.View.extend({ el: $('body'), events: { 'click button#add': 'addItem' }, initialize: function(){ _.bindAll(this, 'render', 'addItem', 'appendItem'); this.collection = new List(); this.collection.bind('add', this.appendItem); this.counter = 0; this.render(); }, render: function(){ $(this.el).append("<button id='add'>Add list item</button>"); $(this.el).append("<ul></ul>"); _(this.collection.models).each(function(item){ appendItem(item); }, this); }, addItem: function(){ this.counter++; var item = new Item(); item.set({ part2: item.get('part2') + this.counter }); this.collection.add(item); }, appendItem: function(item){ var itemView = new ItemView({ model: item }); $('ul', this.el).append(itemView.render().el); } }); var listView = new ListView(); })(jQuery);

    Read the article

  • Book &ldquo;Team Foundation Server 2012 Starter&rdquo; published

    - by terje
    During the summer and fall this year, me and my colleague Jakob Ehn has worked together on a book project that has now finally hit the stores! The title of the book is Team Foundation Server 2012 Starter and is published by Packt Publishing. Get it from http://www.packtpub.com/team-foundation-server-2012-starter/book or from Amazon http://www.amazon.com/dp/1849688389                     The book is part of a concept that Packt have with starter-books, intended for people new to Team Foundation Server 2012 and who want a quick guideline to get it up and working.  It covers the fundamentals, from installing and configuring it, and how to use it with source control, work items and builds. It is done as a step-by-step guide, but also includes best practices advice in the different areas. It covers the use of both the on-premises and the TFS Services version. It also has a list of links and references in the end to the most relevant Visual Studio 2012 ALM sites. Our good friend and fellow ALM MVP Mathias Olausson have done the review of the book, thanks again Mathias! We hope the book fills the gap between the different online guide sites and the more advanced books that are out. Book Description Your quick start guide to TFS 2012, top features, and best practices with hands on examples Overview Install TFS 2012 from scratch Get up and running with your first project Streamline release cycles for maximum productivity In Detail Team Foundation Server 2012 is Microsoft's leading ALM tool, integrating source control, work item and process handling, build automation, and testing. This practical "Team Foundation Server 2012 Starter Guide" will provide you with clear step-by-step exercises covering all major aspects of the product. This is essential reading for anyone wishing to set up, organize, and use TFS server. This hands-on guide looks at the top features in Team Foundation Server 2012, starting with a quick installation guide and then moving into using it for your software development projects. Manage your team projects with Team Explorer, one of the many new features for 2012. Covering all the main features in source control to help you work more efficiently, including tools for branching and merging, we will delve into the Agile Planning Tools for planning your product and sprint backlogs. Learn to set up build automation, allowing your team to become faster, more streamlined, and ultimately more productive with this "Team Foundation Server 2012 Starter Guide". What you will learn from this book Install TFS 2012 on premise Access TFS Services in the cloud Quickly get started with a new project with product backlogs, source control, and build automation Work efficiently with source control using the top features Understand how the tools for branching and merging in TFS 2012 help you isolate work and teams Learn about the existing process templates, such as Visual Studio Scrum 2.0 Manage your product and sprint backlogs using the Agile planning tools Approach This Starter guide is a short, sharp introduction to Team Foundation Server 2012, covering everything you need to get up and running. Who this book is written for If you are a developer, project lead, tester, or IT administrator working with Team Foundation Server 2012 this guide will get you up to speed quickly and with minimal effort.

    Read the article

  • Team Foundation Server 2012 Build Global List Problems

    - by Bob Hardister
    My experience with the upgrade and use of TFS 2012 has been very positive. I did come across a couple of issues recently that tripped things up for a while. ISSUE 1 The first issue is that 2012 prior to Update 1 published an invalid build list item value to the collection global list. In 2010, the build global list, list item value syntax is an underscore between the build definition and the build number. In the 2012 RTM this underscore was replaced with a backslash, which is invalid.  Specifically, an upload of the global list fails when the backslash is followed at some point by a period. The error when using the API is: <detail ExceptionMessage="TF26204: The account you entered is not recognized. Contact your Team Foundation Server administrator to add your account." BaseExceptionName="Microsoft.TeamFoundation.WorkItemTracking.Server.ValidationException"><details id="600019" http://schemas.microsoft.com/TeamFoundation/2005/06/WorkItemTracking/faultdetail/03"http://schemas.microsoft.com/TeamFoundation/2005/06/WorkItemTracking/faultdetail/03" /></detail> when uploading the global list via the process editor the error is: This issue is corrected in Update1 as the backslash is changed to a forward slash. ISSUE 2 The second issue is that when upgrading from 2010 to 2012, the builds in 2010 are not published to the 2012 global list.  After the upgrade the 2012 global lists doesn’t have any builds and only builds run in 2012 are published to the global list. This was reported to the MSDN forums and Connect. To correct this I wrote a utility to pull all the builds and recreate the builds global list for each project in each collection.  This is a console application with a program.cs, a globallists.cs and a app.config (not published here). The utility connects to TFS 2012, loops through the collections or a target collection as specified in the app.config. Then loops through the projects, the build definitions, and builds.  It creates a global list for each project if that project has at least one build. Then it imports the new list to TFS.  Here’s the code for program and globalists classes. Program.CS using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.TeamFoundation.Framework.Client; using Microsoft.TeamFoundation.Framework.Common; using Microsoft.TeamFoundation.Client; using Microsoft.TeamFoundation.Server; using System.IO; using System.Xml; using Microsoft.TeamFoundation.WorkItemTracking.Client; using System.Diagnostics; using Utilities; using System.Configuration; namespace TFSProjectUpdater_CLC { class Program { static void Main(string[] args) { DateTime temp_d = System.DateTime.Now; string logName = temp_d.ToShortDateString(); logName = logName.Replace("/", "_"); logName = logName + "_" + temp_d.TimeOfDay; logName = logName.Replace(":", "."); logName = "TFSGlobalListBuildsUpdater_" + logName + ".log"; Trace.Listeners.Add(new TextWriterTraceListener(Path.Combine(ConfigurationManager.AppSettings["logLocation"], logName))); Trace.AutoFlush = true; Trace.WriteLine("Start:" + DateTime.Now.ToString()); Console.WriteLine("Start:" + DateTime.Now.ToString()); string tfsServer = ConfigurationManager.AppSettings["TargetTFS"].ToString(); GlobalLists gl = new GlobalLists(); //replace this with the URL to your TFS instance. Uri tfsUri = new Uri("https://" + tfsServer + "/tfs"); //bool foundLite = false; TfsConfigurationServer config = new TfsConfigurationServer(tfsUri, new UICredentialsProvider()); config.EnsureAuthenticated(); ITeamProjectCollectionService collectionService = config.GetService<ITeamProjectCollectionService>(); IList<TeamProjectCollection> collections = collectionService.GetCollections().OrderBy(collection => collection.Name.ToString()).ToList(); //target Collection string targetCollection = ConfigurationManager.AppSettings["targetCollection"]; foreach (TeamProjectCollection coll in collections) { if (targetCollection.Equals(string.Empty)) { if (!coll.Name.Equals("TFS Archive") && !coll.Name.Equals("DefaultCol") && !coll.Name.Equals("Team Project Template Gallery")) { doWork(coll, tfsServer); } } else { if (coll.Name.Equals(targetCollection)) { doWork(coll, tfsServer); } } } Trace.WriteLine("Finished:" + DateTime.Now.ToString()); Console.WriteLine("Finished:" + DateTime.Now.ToString()); if (System.Diagnostics.Debugger.IsAttached) { Console.WriteLine("\nHit any key to exit..."); Console.ReadKey(); } Trace.Close(); } static void doWork(TeamProjectCollection coll, string tfsServer) { GlobalLists gl = new GlobalLists(); //target Collection string targetProject = ConfigurationManager.AppSettings["targetProject"]; Trace.WriteLine("Collection: " + coll.Name); Uri u = new Uri("https://" + tfsServer + "/tfs/" + coll.Name.ToString()); TfsTeamProjectCollection c = TfsTeamProjectCollectionFactory.GetTeamProjectCollection(u); ICommonStructureService icss = c.GetService<ICommonStructureService>(); try { Trace.WriteLine("\tChecking Collection Global Lists."); gl.RebuildBuildGlobalLists(c); } catch (Exception ex) { Console.WriteLine("Exception! :" + coll.Name); } } } } GlobalLists.CS using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.TeamFoundation.Client; using Microsoft.TeamFoundation.Framework.Client; using Microsoft.TeamFoundation.Framework.Common; using Microsoft.TeamFoundation.Server; using Microsoft.TeamFoundation.WorkItemTracking.Client; using Microsoft.TeamFoundation.Build.Client; using System.Configuration; using System.Xml; using System.Xml.Linq; using System.Diagnostics; namespace Utilities { public class GlobalLists { string GL_NewList = @"<gl:GLOBALLISTS xmlns:gl=""http://schemas.microsoft.com/VisualStudio/2005/workitemtracking/globallists""> <GLOBALLIST> </GLOBALLIST> </gl:GLOBALLISTS>"; public void RebuildBuildGlobalLists(TfsTeamProjectCollection _tfs) { WorkItemStore wis = new WorkItemStore(_tfs); //export the current globals lists file for the collection to save as a backup XmlDocument globalListsFile = wis.ExportGlobalLists(); globalListsFile.Save(@"c:\temp\" + _tfs.Name.Replace("\\", "_") + "_backupGlobalList.xml"); LogExportCurrentCollectionGlobalListsAsBackup(_tfs); //Build a new global build list from each build definition within each team project IBuildServer buildServer = _tfs.GetService<IBuildServer>(); foreach (Project p in wis.Projects) { XmlDocument newProjectGlobalList = new XmlDocument(); newProjectGlobalList.LoadXml(GL_NewList); LogInstanciateNewProjectBuildGlobalList(_tfs, p); BuildNewProjectBuildGlobalList(_tfs, wis, newProjectGlobalList, buildServer, p); LogEndOfProject(_tfs, p); } } // Private Methods private static void BuildNewProjectBuildGlobalList(TfsTeamProjectCollection _tfs, WorkItemStore wis, XmlDocument newProjectGlobalList, IBuildServer buildServer, Project p) { //locate the template node XmlNamespaceManager nsmgr = new XmlNamespaceManager(newProjectGlobalList.NameTable); nsmgr.AddNamespace("gl", "http://schemas.microsoft.com/VisualStudio/2005/workitemtracking/globallists"); XmlNode node = newProjectGlobalList.SelectSingleNode("//gl:GLOBALLISTS/GLOBALLIST", nsmgr); LogLocatedGlobalListNode(_tfs, p); //add the name attribute for the project build global list XmlElement buildListNode = (XmlElement)node; buildListNode.SetAttribute("name", "Builds - " + p.Name); LogAddedBuildNodeName(_tfs, p); //add new builds to the team project build global list bool buildsExist = false; if (AddNewBuilds(_tfs, newProjectGlobalList, buildServer, p, node, buildsExist)) { //import the new build global list for each project that has builds newProjectGlobalList.Save(@"c:\temp\" + _tfs.Name.Replace("\\", "_") + "_" + p.Name + "_" + "newGlobalList.xml"); //write out temp copy of the global list file to be imported LogImportReady(_tfs, p); wis.ImportGlobalLists(newProjectGlobalList.InnerXml); LogImportComplete(_tfs, p); } } private static bool AddNewBuilds(TfsTeamProjectCollection _tfs, XmlDocument newProjectGlobalList, IBuildServer buildServer, Project p, XmlNode node, bool buildsExist) { var buildDefinitions = buildServer.QueryBuildDefinitions(p.Name); foreach (var buildDefinition in buildDefinitions) { var builds = buildDefinition.QueryBuilds(); foreach (var build in builds) { //insert the builds into the current build list node in the correct 2012 format buildsExist = true; XmlElement listItem = newProjectGlobalList.CreateElement("LISTITEM"); listItem.SetAttribute("value", buildDefinition.Name + "/" + build.BuildNumber.ToString().Replace(buildDefinition.Name + "_", "")); node.AppendChild(listItem); } } if (buildsExist) LogBuildListCreated(_tfs, p); else LogNoBuildsInProject(_tfs, p); return buildsExist; } // Logging Methods private static void LogExportCurrentCollectionGlobalListsAsBackup(TfsTeamProjectCollection _tfs) { Trace.WriteLine("\tExported Global List for " + _tfs.Name + " collection."); Console.WriteLine("\tExported Global List for " + _tfs.Name + " collection."); } private void LogInstanciateNewProjectBuildGlobalList(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tInstanciated the new build global list for project " + p.Name + " in the " + _tfs.Name + " collection."); Console.WriteLine("\t\tInstanciated the new build global list for project \n\t\t\t" + p.Name + " in the \n\t\t\t" + _tfs.Name + " collection."); } private static void LogLocatedGlobalListNode(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tLocated the build global list node for project " + p.Name + " in the " + _tfs.Name + " collection."); Console.WriteLine("\t\tLocated the build global list node for project \n\t\t\t" + p.Name + " in the \n\t\t\t" + _tfs.Name + " collection."); } private static void LogAddedBuildNodeName(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tAdded the name attribute to the build global list for project " + p.Name + " in the " + _tfs.Name + " collection."); Console.WriteLine("\t\tAdded the name attribute to the build global list for project \n\t\t\t" + p.Name + " in the \n\t\t\t" + _tfs.Name + " collection."); } private static void LogBuildListCreated(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tAdded all builds into the " + "Builds - " + p.Name + " list in the " + _tfs.Name + " collection."); Console.WriteLine("\t\tAdded all builds into the " + "Builds - \n\t\t\t" + p.Name + " list in the \n\t\t\t" + _tfs.Name + " collection."); } private static void LogNoBuildsInProject(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tNo builds found for project " + p.Name + " in the " + _tfs.Name + " collection."); Console.WriteLine("\t\tNo builds found for project " + p.Name + " \n\t\t\tin the " + _tfs.Name + " collection."); } private void LogEndOfProject(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tEND OF PROJECT " + p.Name); Trace.WriteLine(" "); Console.WriteLine("\t\tEND OF PROJECT " + p.Name); Console.WriteLine(); } private static void LogImportReady(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tReady to import the build global list for project " + p.Name + " to the " + _tfs.Name + " collection."); Console.WriteLine("\t\tReady to import the build global list for project \n\t\t\t" + p.Name + " to the \n\t\t\t" + _tfs.Name + " collection."); } private static void LogImportComplete(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tImport of the build global list for project " + p.Name + " to the " + _tfs.Name + " collection completed."); Console.WriteLine("\t\tImport of the build global list for project \n\t\t\t" + p.Name + " to the \n\t\t\t" + _tfs.Name + " collection completed."); } } }

    Read the article

  • Get a new instance with StructureMap

    - by Aligned
    It took me too long to figure this out, so hopefully it will help you. StructureMap has way that will create a new instance of the object every time, instead of storing this in the container. I’m going to use this for the DBContext and for WCF Service references. Since the ObjectFactory is a static class, MVC will have these stored in memory without this. Credit goes to Joshua Flanagan for answering my question.[TestMethod] public void GetConcreteInstanceOf_ShouldReturn_DifferentInstance() { ObjectFactory.Initialize(registry => { // set it up so that it's new every time // use this for DBContext and service references registry.For<ISystemDataService>().Use(() => new SystemDataService()); }); ISystemDataService result = Resolver.GetConcreteInstanceOf<ISystemDataService>(); ISystemDataService result2 = Resolver.GetConcreteInstanceOf<ISystemDataService>(); Assert.AreNotSame(result, result2); }

    Read the article

  • Lost Linux root password - Recovery mode and init=/bin/bash fail

    - by Albeit
    I lost/forgot the root password to a server sitting beside me and am trying to reset it. I would rather not have to wipe and re-install or use a Live CD (server is running Ubuntu Server 12.04). What I've tried so far... 1) Boot into "Recovery mode" from Grub2 boot menu then drop into root shell prompt. I am prompted to "Give root password for maintenance". No-go. 2) Change the boot parameters for the main boot option to include "rw" and "init=/bin/bash". When I then boot with Ctrl-X, the screen goes black, and nothing happens (I've waited five minutes). init=/bin/sh and init=/bin/static-sh both do the same thing, while init=/sbin/init boots as normal. Is there anything else I can try to reset the root password? Thank you!

    Read the article

  • Linux Tuning for High Traffic JBoss Server with LDAP Binds

    - by Levi Stanley
    I'm configuring a high traffic Linux server (RedHat) and running into a limit I haven't been able to track down. I need to be able to handle sustained 300 requests per second throughput using Nginx and JBoss. The point of this server is to run checks on a user's account when that user signs in. Each request goes through Nginx to JBoss (specifically Torquebox with JBoss A7 with a Sinatra app) and then makes an LDAP request to bind that user and retrieve several attributes. It is during the bind that these errors occur. I'm able to reproduce this going directly to JBoss, so that rules out Nginx at least. I get a variety of error messages, though oddly JBoss stopped writing to the log file recently. It used to report errors about creating native threads. Now I just see "java.net.SocketException: Connection reset" and "org.apache.http.conn.HttpHostConnectException: Connection to http://my.awesome.server:8080 refused" as responses in jmeter. To the best of my knowledge, I have plenty of available file handles, processes, sockets, and ports, yet the issue persists. Unfortunately, I have very little experience tuning servers. I've found a couple useful documents - Ipsysctl tutorial 1.0.4 and Linux Tuning - but those documents are a bit over my head (and just entering the the configuration described in Linux Tuning doesn't fix my issue. Here are the configuration changes I've tried (webproxy is the user that runs Nginx and JBoss): /etc/security/limits.conf webproxy soft nofile 65536 webproxy hard nofile 65536 webproxy soft nproc 65536 webproxy hard nproc 65536 root soft nofile 65536 root hard nofile 65536 root soft nproc 65536 root hard nofile 65536 First attempt /etc/sysctl.conf sysctl net.core.somaxconn = 8192 sysctl net.ipv4.ip_local_port_range = 32768 65535 sysctl net.ipv4.tcp_fin_timeout = 15 sysctl net.ipv4.tcp_keepalive_time = 1800 sysctl net.ipv4.tcp_keepalive_intvl = 35 sysctl net.ipv4.tcp_tw_recycle = 1 sysctl net.ipv4.tcp_tw_reuse = 1 Second attempt /etc/sysctl.conf net.core.rmem_max = 16777216 net.core.wmem_max = 16777216 net.ipv4.tcp_rmem = 4096 87380 16777216 net.ipv4.tcp_wmem = 4096 65536 16777216 net.core.netdev_max_backlog = 30000 net.ipv4.tcp_congestion_control=htcp net.ipv4.tcp_mtu_probing=1 Any ideas what might be happening here? Or better yet, are there some good documentation resources designed for beginners?

    Read the article

  • Deploying Office 2013 via GPO

    - by NickC
    Looking at potential ways to deploy Office 2013 via GPO. First and most obvious way is to run a startup script which calls the Office 2013 setup.exe. Problem here is what happens after it is installed, will that startup script keep re-installing the product every time the machine boots? Another potential way is to install each Office component separately using the multitude of .msi files which are present, would that work and provide the same thing as a full install of Office? There is actually twenty three separate .msi files. What about officemui.msi is that a wrapper which contains calls to all of the other office components.

    Read the article

  • LighTPD and PHP not working if outside of LightTPD folder

    - by Marco83
    I need to set up a simple web server with PHP on Windows XP that a number of different people will use for local testing. I'm using LightTPD 1.4.30-4-IPv6-Win32-SSL and PHP 5.2. So far I've created this folder structure: tools/ LightTPD/ htdocs/ PHP/ I set up PHP as CGI and the document root as server_root + "/htdocs". It works fine (well, it's slow but I don't want to bother with FastCGI for now :) ). My problem is when I try to put the htdocs outside of LightTPD folder, like this: htdocs/ tools/ LightTPD/ PHP/ I update the document root to server_root + "/../../htdocs" and while static HTML pages work fine, PHP pages stop working (they return a "No input file specified"). I literally just change the document root, I didn't change anything in the php.ini or anywhere else. Please also note that I left all doc_root, user_dir and cgi.force_redirect to the default values in php.ini, and it works when htdocs is inside LightTPD, but not when I move it ouside. Any idea of why it's breaking?? Here's my lightTPD.conf: server.modules = ( "mod_access", "mod_accesslog", "mod_alias", "mod_cgi", "mod_status", ) include "variables.conf" include "mimetype.conf" # THIS WORKS server.document-root = server_root + "/htdocs" # THIS DOESN'T #server.document-root = server_root + "/../../htdocs" server.upload-dirs = ( temp_dir ) index-file.names = ( "index.php", "index.pl", "index.cgi", "index.cml", "index.html", "index.htm", "default.htm" ) server.event-handler = "libev" url.access-deny = ( "~", ".inc" ) $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } static-file.exclude-extensions = ( ".php", ".pl", ".cgi" ) server.errorlog = server_root + "/logs/error.log" ######### Options that are good to be but not neccesary to be changed ####### dir-listing.activate = "enable" #### CGI module cgi.assign = ( ".php" => server_root + "/../PHP/php-cgi.exe" ) status.status-url = "/server-status" status.config-url = "/server-config"

    Read the article

  • VirtualBox - multiple guests, each with a single bridged adapter?

    - by Martin
    I am running a dedicated server (located at Hetzner, Germany) that runs VirtualBox in order to virtualize several services accross multiple virtual guests. Those guests are supposed to communicate with each other (for instance, a virtual web server has to access a virtual database server); to be reachable from the dedicated server (for instance, SSH access); and to access the Internet via the dedicated server (for instance, to download security updates) Currently, this is achieved by having host-only adapter vboxnet0 on the dedicated server and two virtual interfaces on each guest. There, virtual adapter eth0 is attached to vboxnet0 (to achieve (1) and (2)), virtual adapter eth1 is attached to VirtualBox' NAT (to achieve (3)). Via eth0, the guests have access to a DHCP and a DNS server, both running on the dedicated server (there, bound to vboxnet0). This allows me to assign custom IP addresses and names. Via eth1, VirtualBox pushes a proper route that enables each guest to access the Internet (via eth0 on the dedicated server). This setup with two virtual adapters frequently leads to problems and at leasts complicates many things. For instance, on the dedicated server there is OpenVPN which allows to access the virtual machines via the Internet; futhermore, there is Shorwall that controls the incoming and outgoing network traffic between the Internet, the dedicated server, and the individual virtual machines. Not to mention automatic installation of servers via PXE... Therefore, I would prefer to have only one single virtual adapter on each guest which would be used for both incoming and outgoing connections. As far as I understand, one would basically use a bridged interface for that very purpose. Now the question arises: Which interface on the dedicated server would the bridge use? eth0 on the host server is not an option, as this is prohibited by the provider. A virtual interface eth0:0 would not make any sense, as a bridge always uses a physical interface (eth0 in this case). Would it be possible to create a bridged interface in each virtual machine that would "dangle in the air"? Thus, without a complement on the dedicated server? How would I have to set up the routing on the host server? Please note that the host / dedicated server has only one network adapter (eth0) which is connected to the provider's network. Regards, Martin

    Read the article

  • PowerConnect 3548p SNTP and web interface not working

    - by Force Flow
    I have been unable to get SNTP and access to the web interface working properly on a Dell PowerConnect 3548p. In the logs, this message appears over and over again: 04-Jan-2000 20:19:29 :%MNGINF-W-ACL: Management ACL drop packet received on interface Vlan 172 from 172.17.0.3 to 172.18.0.10 protocol 17 service Snmp 172 is the management vlan. 172.17.0.3 is the DNS server 172.18.0.10 is the switch's IP address. The DNS server and the switch are located on different subnets and separated by routers. I am unable to access the web interface of the switch from the 172.17.x.x subnet. I can only access the web interface of the switch if I am accessing it from the 172.18.x.x subnet. There is also a managed linksys switch on the 172.18.x.x subnet on the 172 vlan, which has no problem with SNTP. I can also access it from the 172.17.x.x network. So, it stands to reason that this is not a firewall or routing issue, but with the 3548p switch. I suspect the issue is with management permissions/ACLs on the 3348p switch, but that's about as much as I've been able to determine so far. Any ideas?

    Read the article

  • Cant access folder on server- Permission denied

    - by Michal Korzeniowski
    I am running a vps with ubuntu 11.04. After a clean Modx install I've tried to access http://www.encepence.pl/manager and I've got a permission denied by my server. the thing is that I can easily access any other folder under that domain and modify this folder(manager) content via ftp. I’ve tried modifying virtual host with that <Directory /var/www/blackflow/data/www/encepence.pl/manager/> Options Indexes FollowSymLinks ExecCGI AllowOverride All Order allow,deny Allow from all </Directory> But it didn't work. <Directory /var/www/blackflow/data/www/encepence.pl> Options -ExecCGI -Includes php_admin_value open_basedir "/var/www/blackflow/data:." php_admin_flag engine on </Directory> <VirtualHost 192.166.219.34:80 > ServerName encepence.pl CustomLog /var/www/httpd-logs/encepence.pl.access.log combined DocumentRoot /var/www/blackflow/data/www/encepence.pl ErrorLog /var/www/httpd-logs/encepence.pl.error.log ServerAdmin [email protected] ServerAlias www.encepence.pl SuexecUserGroup blackflow blackflow AddType application/x-httpd-php .php .php3 .php4 .php5 .phtml AddType application/x-httpd-php-source .phps php_admin_value open_basedir "/var/www/blackflow/data:." php_admin_value sendmail_path "/usr/sbin/sendmail -t -i -f [email protected]" php_admin_value upload_tmp_dir "/var/www/blackflow/data/mod-tmp" php_admin_value session.save_path "/var/www/blackflow/data/mod-tmp" VirtualDocumentRoot /var/www/blackflow/data/www/%0 </VirtualHost> Any ideas on what might have gone wrong?

    Read the article

  • how to strip string from url using rewrite rule

    - by Alaa Alomari
    sometimes my drupal site add extra string to image url which causes the image to be broken. the url is http://mysite.com/sites/default/files/imagecache/list_image_page/%252Fsites/default/files/img.jpg what is the needed rewrite rule to strip the bolded (%252F) part in the above link ie. to be: http://mysite.com/sites/default/files/imagecache/list_image_page/sites/default/files/img.jpg I have tried this, but didn't work RewriteCond %{QUERY_STRING} ^(.*)\%252Fsites(.*)$ RewriteRule %{REQUEST_URI} %1sites%2

    Read the article

< Previous Page | 437 438 439 440 441 442 443 444 445 446 447 448  | Next Page >