Daily Archives

Articles indexed Saturday October 20 2012

Page 5/14 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• How to setup IIS 7.5 Reverse Proxy for quite a few internal servers - Server Farm?

  - by Tim Murphree

  I have tried for a few days, but I'm lost. Here's what I'm trying to do: I want to setup an IIS 7.5 as a Reverse Proxy for about 30 internal HTTP servers, located on my internal LAN. Everything is running on port 80. The internal servers are really IP based webcams. Here is scenario: www.mycamserver.com/cam1 192.168.1.101 www.mycamserver.com/cam2 192.168.1.102 and so on, until.. www.mycamserver.com/cam30 192.168.1.130 I have installed ARR and URL Rewrite. So far, I have managed, at one time, to seem to forward an incoming URL to an internal server, but the page would not fully load (error 404). Also, I setup a Server Farm, but it seems all traffic is now set to the first node on the Server Farm (192.168.1.101). However, at least the page loads and runs correctly. I simply want to do an exact match, for example, "cam14", and reverse-proxy / rewrite to a corresponding internal server address - "192.168.1.114".

  Read the article

• How to maximize parallel download from S3

  - by StCee

  I got a lot of images to load from Amazon S3 on a single page, and sometimes it takes quite some time to load all the images. I heard that splitting the images to load from different sub-domains would help parallel downloads, however what is the actual implementation on that? While it is easy to split for sub-domains like static,image, etc; Should I make like 10 sub-domains (image1, image2...) to load say 100 images? Or is there some clever ways to do? (By the way I am considering using memcache to cache the S3images; I am not sure if it is possible. I would be grateful for any further comments. Thanks a lot!

  Read the article

• The requested operation has failed! (cannot find answer)

  - by Geoff

  I know this problem is plastered all over the web but I've been searching and trying for hours with no luck. Can someone please give me some help? I originally installed Apache 2.0.64 along with PHP 5.2.17, I went through all of the steps in this tutorial with no luck, I found that the culprit was the LoadModule line. After looking on the internet I found a whole bunch of stuff but a lot of it was referring to PHP 5 and Apache 2.2. Since there seemed to be more info on apache 2.2 I removed apache 2.0.64 and installed 2.2. I added the code to LoadModule in the conf file but I got the same problem. I then followed the steps in this tutorial because it was slightly different with some things I hadn't tried yet but still I get the same problem. If I comment out LoadModule... it works fine but otherwise I get "The requested operation has failed!". This is what I ended up keeping since it works only having to comment one line. LoadModule php5_module "c:/php/php5apache2_2.dll" <IfModule mod_php5.c> AddType application/x-httpd-php .php PHPIniDir "c:/php" DirectoryIndex index.php </IfModule> EDIT: How can I stop getting this error message? UPDATE: Also, please note that I took note of the message in the PHP site that stated if PHP 5.2 was to be run with Apache to use the VC6 and not VC9. I had VC9 so I replaced it with VC6, the file is labeled php-5.2.17-nts-Win32-VC6-x86.zip

  Read the article

• JBoss AS 5: starts but can't connect (Windows, remote)

  - by Nuwan

  Hello I installed Jboss 5.0GA and Its works fine in localhost.But I want It to access through remote Machine.Then I bind my IP address to my server and started it.This is the command I used run.bat -b 10.17.62.63 Then the server Starts fine This is the console log when starting the server > =============================================================================== > > JBoss Bootstrap Environment > > JBOSS_HOME: C:\jboss-5.0.0.GA > > JAVA: C:\Program Files\Java\jdk1.6.0_34\bin\java > > JAVA_OPTS: -Dprogram.name=run.bat -server -Xms128m -Xmx512m > -XX:MaxPermSize=25 6m -Dorg.jboss.resolver.warning=true -Dsun.rmi.dgc.client.gcInterval=3600000 -Ds un.rmi.dgc.server.gcInterval=3600000 > > CLASSPATH: C:\jboss-5.0.0.GA\bin\run.jar > > =============================================================================== > > run.bat: unused non-option argument: ûb run.bat: unused non-option > argument: 0.0.0.0 13:43:38,179 INFO [ServerImpl] Starting JBoss > (Microcontainer)... 13:43:38,179 INFO [ServerImpl] Release ID: JBoss > [Morpheus] 5.0.0.GA (build: SV NTag=JBoss_5_0_0_GA date=200812041714) > 13:43:38,179 INFO [ServerImpl] Bootstrap URL: null 13:43:38,179 INFO > [ServerImpl] Home Dir: C:\jboss-5.0.0.GA 13:43:38,179 INFO > [ServerImpl] Home URL: file:/C:/jboss-5.0.0.GA/ 13:43:38,195 INFO > [ServerImpl] Library URL: file:/C:/jboss-5.0.0.GA/lib/ 13:43:38,195 > INFO [ServerImpl] Patch URL: null 13:43:38,195 INFO [ServerImpl] > Common Base URL: file:/C:/jboss-5.0.0.GA/common/ > > 13:43:38,195 INFO [ServerImpl] Common Library URL: > file:/C:/jboss-5.0.0.GA/comm on/lib/ 13:43:38,195 INFO [ServerImpl] > Server Name: default 13:43:38,195 INFO [ServerImpl] Server Base Dir: > C:\jboss-5.0.0.GA\server 13:43:38,195 INFO [ServerImpl] Server Base > URL: file:/C:/jboss-5.0.0.GA/server/ > > 13:43:38,210 INFO [ServerImpl] Server Config URL: > file:/C:/jboss-5.0.0.GA/serve r/default/conf/ 13:43:38,210 INFO > [ServerImpl] Server Home Dir: C:\jboss-5.0.0.GA\server\defaul t > 13:43:38,210 INFO [ServerImpl] Server Home URL: > file:/C:/jboss-5.0.0.GA/server/ default/ 13:43:38,210 INFO > [ServerImpl] Server Data Dir: C:\jboss-5.0.0.GA\server\defaul t\data > 13:43:38,210 INFO [ServerImpl] Server Library URL: > file:/C:/jboss-5.0.0.GA/serv er/default/lib/ 13:43:38,210 INFO > [ServerImpl] Server Log Dir: C:\jboss-5.0.0.GA\server\default \log > 13:43:38,210 INFO [ServerImpl] Server Native Dir: > C:\jboss-5.0.0.GA\server\defa ult\tmp\native 13:43:38,210 INFO > [ServerImpl] Server Temp Dir: C:\jboss-5.0.0.GA\server\defaul t\tmp > 13:43:38,210 INFO [ServerImpl] Server Temp Deploy Dir: > C:\jboss-5.0.0.GA\server \default\tmp\deploy 13:43:39,710 INFO > [ServerImpl] Starting Microcontainer, bootstrapURL=file:/C:/j > boss-5.0.0.GA/server/default/conf/bootstrap.xml 13:43:40,851 INFO > [VFSCacheFactory] Initializing VFSCache [org.jboss.virtual.pl > ugins.cache.IterableTimedVFSCache] 13:43:40,866 INFO > [VFSCacheFactory] Using VFSCache [IterableTimedVFSCache{lifet > ime=1800, resolution=60}] 13:43:41,616 INFO [CopyMechanism] VFS temp > dir: C:\jboss-5.0.0.GA\server\defaul t\tmp 13:43:41,648 INFO > [ZipEntryContext] VFS force nested jars copy-mode is enabled. > > 13:43:44,288 INFO [ServerInfo] Java version: 1.6.0_34,Sun > Microsystems Inc. 13:43:44,288 INFO [ServerInfo] Java VM: Java > HotSpot(TM) Server VM 20.9-b04,Sun Microsystems Inc. 13:43:44,288 > INFO [ServerInfo] OS-System: Windows XP 5.1,x86 13:43:44,569 INFO > [JMXKernel] Legacy JMX core initialized 13:43:50,148 INFO > [ProfileServiceImpl] Loading profile: default from: org.jboss > .system.server.profileservice.repository.SerializableDeploymentRepository@e72f0c > (root=C:\jboss-5.0.0.GA\server, > key=org.jboss.profileservice.spi.ProfileKey@143b > 82c3[domain=default,server=default,name=default]) 13:43:50,148 INFO > [ProfileImpl] Using repository:org.jboss.system.server.profil > eservice.repository.SerializableDeploymentRepository@e72f0c(root=C:\jboss-5.0.0. > GA\server, > key=org.jboss.profileservice.spi.ProfileKey@143b82c3[domain=default,s > erver=default,name=default]) 13:43:50,148 INFO [ProfileServiceImpl] > Loaded profile: ProfileImpl@8b3bb3{key=o > rg.jboss.profileservice.spi.ProfileKey@143b82c3[domain=default,server=default,na > me=default]} 13:43:54,804 INFO [WebService] Using RMI server > codebase: http://127.0.0.1:8083 / 13:44:12,147 INFO [CXFServerConfig] > JBoss Web Services - Stack CXF Runtime Serv er 13:44:12,147 INFO > [CXFServerConfig] 3.1.2.GA 13:44:29,788 INFO > [Ejb3DependenciesDeployer] Encountered deployment AbstractVFS > DeploymentContext@29776073{vfszip:/C:/jboss-5.0.0.GA/server/default/deploy/myE-e > jb.jar} 13:44:29,819 INFO [Ejb3DependenciesDeployer] Encountered > deployment AbstractVFS > DeploymentContext@29776073{vfszip:/C:/jboss-5.0.0.GA/server/default/deploy/myE-e > jb.jar} 13:44:29,819 INFO [Ejb3DependenciesDeployer] Encountered > deployment AbstractVFS > DeploymentContext@29776073{vfszip:/C:/jboss-5.0.0.GA/server/default/deploy/myE-e > jb.jar} 13:44:29,819 INFO [Ejb3DependenciesDeployer] Encountered > deployment AbstractVFS > DeploymentContext@29776073{vfszip:/C:/jboss-5.0.0.GA/server/default/deploy/myE-e > jb.jar} 13:44:37,116 INFO [JMXConnectorServerService] JMX Connector > server: service:jmx > :rmi://127.0.0.1/jndi/rmi://127.0.0.1:1090/jmxconnector 13:44:38,022 > INFO [MailService] Mail Service bound to java:/Mail 13:44:43,162 WARN > [JBossASSecurityMetadataStore] WARNING! POTENTIAL SECURITY RI SK. It > has been detected that the MessageSucker component which sucks > messages f rom one node to another has not had its password changed > from the installation d efault. Please see the JBoss Messaging user > guide for instructions on how to do this. 13:44:43,209 WARN > [AnnotationCreator] No ClassLoader provided, using TCCL: org. > jboss.managed.api.annotation.ManagementComponent 13:44:43,600 INFO > [TransactionManagerService] JBossTS Transaction Service (JTA version) > - JBoss Inc. 13:44:43,600 INFO [TransactionManagerService] Setting up property manager MBean and JMX layer 13:44:44,366 INFO > [TransactionManagerService] Initializing recovery manager 13:44:44,678 > INFO [TransactionManagerService] Recovery manager configured > 13:44:44,678 INFO [TransactionManagerService] Binding > TransactionManager JNDI R eference 13:44:44,787 INFO > [TransactionManagerService] Starting transaction recovery man ager > 13:44:46,428 INFO [Http11Protocol] Initializing Coyote HTTP/1.1 on > http-127.0.0 .1-8080 13:44:46,459 INFO [AjpProtocol] Initializing > Coyote AJP/1.3 on ajp-127.0.0.1-80 09 13:44:46,459 INFO > [StandardService] Starting service jboss.web 13:44:46,475 INFO > [StandardEngine] Starting Servlet Engine: JBoss Web/2.1.1.GA > 13:44:46,616 INFO [Catalina] Server startup in 350 ms 13:44:46,709 > INFO [TomcatDeployment] deploy, ctxPath=/web-console, vfsUrl=manag > ement/console-mgr.sar/web-console.war 13:44:48,553 INFO > [TomcatDeployment] deploy, ctxPath=/juddi, vfsUrl=juddi-servi > ce.sar/juddi.war 13:44:48,678 INFO [RegistryServlet] Loading jUDDI > configuration. 13:44:48,694 INFO [RegistryServlet] Resources loaded > from: /WEB-INF/juddi.prope rties 13:44:48,709 INFO [RegistryServlet] > Initializing jUDDI components. 13:44:48,991 INFO [TomcatDeployment] > deploy, ctxPath=/invoker, vfsUrl=http-invo ker.sar/invoker.war > 13:44:49,162 INFO [TomcatDeployment] deploy, ctxPath=/jbossws, > vfsUrl=jbossws.s ar/jbossws-management.war 13:44:49,475 INFO > [RARDeployment] Required license terms exist, view vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/jboss-local-jdbc.rar/META-INF/ra.xml > 13:44:49,569 INFO [RARDeployment] Required license terms exist, view > vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/jboss-xa-jdbc.rar/META-INF/ra.xml > 13:44:49,741 INFO [RARDeployment] Required license terms exist, view > vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/jms-ra.rar/META-INF/ra.xml > 13:44:49,819 INFO [RARDeployment] Required license terms exist, view > vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/mail-ra.rar/META-INF/ra.xml > 13:44:49,912 INFO [RARDeployment] Required license terms exist, view > vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/quartz-ra.rar/META-INF/ra.xml > 13:44:50,069 INFO [SimpleThreadPool] Job execution threads will use > class loade r of thread: main 13:44:50,115 INFO [QuartzScheduler] > Quartz Scheduler v.1.5.2 created. 13:44:50,131 INFO [RAMJobStore] > RAMJobStore initialized. 13:44:50,131 INFO [StdSchedulerFactory] > Quartz scheduler 'DefaultQuartzSchedule r' initialized from default > resource file in Quartz package: 'quartz.properties' > > 13:44:50,131 INFO [StdSchedulerFactory] Quartz scheduler version: > 1.5.2 13:44:50,131 INFO [QuartzScheduler] Scheduler DefaultQuartzScheduler_$_NON_CLUS TERED started. 13:44:51,194 INFO > [ConnectionFactoryBindingService] Bound ConnectionManager 'jb > oss.jca:service=DataSourceBinding,name=DefaultDS' to JNDI name > 'java:DefaultDS' 13:44:51,819 WARN [QuartzTimerServiceFactory] sql > failed: CREATE TABLE QRTZ_JOB > _DETAILS(JOB_NAME VARCHAR(80) NOT NULL, JOB_GROUP VARCHAR(80) NOT NULL, DESCRIPT ION VARCHAR(120) NULL, JOB_CLASS_NAME VARCHAR(128) NOT > NULL, IS_DURABLE VARCHAR( 1) NOT NULL, IS_VOLATILE VARCHAR(1) NOT > NULL, IS_STATEFUL VARCHAR(1) NOT NULL, R EQUESTS_RECOVERY VARCHAR(1) > NOT NULL, JOB_DATA BINARY NULL, PRIMARY KEY (JOB_NAM E,JOB_GROUP)) > 13:44:51,912 INFO [SimpleThreadPool] Job execution threads will use > class loade r of thread: main 13:44:51,928 INFO [QuartzScheduler] > Quartz Scheduler v.1.5.2 created. 13:44:51,928 INFO [JobStoreCMT] > Using db table-based data access locking (synch ronization). > 13:44:51,944 INFO [JobStoreCMT] Removed 0 Volatile Trigger(s). > 13:44:51,944 INFO [JobStoreCMT] Removed 0 Volatile Job(s). > 13:44:51,944 INFO [JobStoreCMT] JobStoreCMT initialized. 13:44:51,944 > INFO [StdSchedulerFactory] Quartz scheduler 'JBossEJB3QuartzSchedu > ler' initialized from an externally provided properties instance. > 13:44:51,959 INFO [StdSchedulerFactory] Quartz scheduler version: > 1.5.2 13:44:51,959 INFO [JobStoreCMT] Freed 0 triggers from 'acquired' / 'blocked' st ate. 13:44:51,975 INFO [JobStoreCMT] > Recovering 0 jobs that were in-progress at the time of the last > shut-down. 13:44:51,975 INFO [JobStoreCMT] Recovery complete. > 13:44:51,975 INFO [JobStoreCMT] Removed 0 'complete' triggers. > 13:44:51,975 INFO [JobStoreCMT] Removed 0 stale fired job entries. > 13:44:51,990 INFO [QuartzScheduler] Scheduler > JBossEJB3QuartzScheduler_$_NON_CL USTERED started. 13:44:52,381 INFO > [ServerPeer] JBoss Messaging 1.4.1.GA server [0] started 13:44:52,569 > INFO [QueueService] Queue[/queue/DLQ] started, fullSize=200000, pa > geSize=2000, downCacheSize=2000 13:44:52,584 INFO [QueueService] > Queue[/queue/ExpiryQueue] started, fullSize=20 0000, pageSize=2000, > downCacheSize=2000 13:44:52,709 INFO [ConnectionFactory] Connector > bisocket://127.0.0.1:4457 has l easing enabled, lease period 10000 > milliseconds 13:44:52,709 INFO [ConnectionFactory] > org.jboss.jms.server.connectionfactory.Co nnectionFactory@1a8ac5e > started 13:44:52,725 WARN [ConnectionFactoryJNDIMapper] > supportsFailover attribute is t rue on connection factory: > jboss.messaging.connectionfactory:service=ClusteredCo nnectionFactory > but post office is non clustered. So connection factory will *no t* > support failover 13:44:52,725 WARN [ConnectionFactoryJNDIMapper] > supportsLoadBalancing attribute is true on connection factory: > jboss.messaging.connectionfactory:service=Cluste redConnectionFactory > but post office is non clustered. So connection factory wil l *not* > support load balancing 13:44:52,740 INFO [ConnectionFactory] > Connector bisocket://127.0.0.1:4457 has l easing enabled, lease period > 10000 milliseconds 13:44:52,740 INFO [ConnectionFactory] > org.jboss.jms.server.connectionfactory.Co nnectionFactory@1d43178 > started 13:44:52,740 INFO [ConnectionFactory] Connector > bisocket://127.0.0.1:4457 has l easing enabled, lease period 10000 > milliseconds 13:44:52,756 INFO [ConnectionFactory] > org.jboss.jms.server.connectionfactory.Co nnectionFactory@52728a > started 13:44:53,084 INFO [ConnectionFactoryBindingService] Bound > ConnectionManager 'jb > oss.jca:service=ConnectionFactoryBinding,name=JmsXA' to JNDI name > 'java:JmsXA' 13:44:53,225 INFO [TomcatDeployment] deploy, ctxPath=/, > vfsUrl=ROOT.war 13:44:53,553 INFO [TomcatDeployment] deploy, > ctxPath=/jmx-console, vfsUrl=jmx-c onsole.war 13:44:53,975 INFO > [TomcatDeployment] deploy, ctxPath=/TestService, vfsUrl=TestS > erviceEAR.ear/TestService.war 13:44:55,662 INFO [JBossASKernel] > Created KernelDeployment for: myE-ejb.jar 13:44:55,709 INFO > [JBossASKernel] installing bean: jboss.j2ee:jar=myE-ejb.jar,n > ame=RPSService,service=EJB3 13:44:55,725 INFO [JBossASKernel] with > dependencies: 13:44:55,725 INFO [JBossASKernel] and demands: > 13:44:55,725 INFO [JBossASKernel] > jboss.ejb:service=EJBTimerService 13:44:55,725 INFO [JBossASKernel] > and supplies: 13:44:55,725 INFO [JBossASKernel] > jndi:RPSService/remote 13:44:55,725 INFO [JBossASKernel] Added > bean(jboss.j2ee:jar=myE-ejb.jar,name=RP SService,service=EJB3) to > KernelDeployment of: myE-ejb.jar 13:44:56,772 INFO > [SessionSpecContainer] Starting jboss.j2ee:jar=myE-ejb.jar,na > me=RPSService,service=EJB3 13:44:56,803 INFO [EJBContainer] STARTED > EJB: com.monz.rpz.RPSService ejbName: RPSService 13:44:56,819 INFO > [JndiSessionRegistrarBase] Binding the following Entries in G lobal > JNDI: > > > 13:44:57,381 INFO [DefaultEndpointRegistry] register: > jboss.ws:context=myE-ejb, endpoint=RPSService 13:44:57,428 INFO > [DescriptorDeploymentAspect] Add Service id=RPSService > address=http://127.0.0.1:8080/myE-ejb/RPSService > implementor=com.monz.rpz.RPSService > invoker=org.jboss.wsf.stack.cxf.InvokerEJB3 mtomEnabled=false > 13:44:57,459 INFO [DescriptorDeploymentAspect] JBossWS-CXF > configuration genera ted: > file:/C:/jboss-5.0.0.GA/server/default/tmp/jbossws/jbossws-cxf1864137209199 > 110130.xml 13:44:57,569 INFO [TomcatDeployment] deploy, ctxPath=/myE-ejb, vfsUrl=myE-ejb.j ar 13:44:57,709 WARN [config] > Unable to process deployment descriptor for context '/myE-ejb' > 13:44:59,334 INFO [Http11Protocol] Starting Coyote HTTP/1.1 on > http-127.0.0.1-8 080 13:44:59,397 INFO [AjpProtocol] Starting Coyote > AJP/1.3 on ajp-127.0.0.1-8009 13:44:59,459 INFO [ServerImpl] JBoss > (Microcontainer) [5.0.0.GA (build: SVNTag= JBoss_5_0_0_GA > date=200812041714)] Started in 1m:21s:233ms But Still I cant connect to It when I Type my IP address in my browser thanks

  Read the article

• Postifix SMTP Load Balance

  - by user103373

  I want to load balance outbound emails between 3 post-fix gateways for sending mails only reason is to use multiple different source IPs to increase throughput & inbox delivery. Each gateway should receive an approximately equal amount of outbound messages. How is it possible please suggest. +---------- smtp A --------- Internet | clients -------- smtp lb ----- smtp B --------- Internet | +---------- smtp C --------- Internet

  Read the article

• what is the location of the log file for bugzilla on windows

  - by mohang

  We are using Bugzlla on windows. We set up the SMTP server configuration in the admin parameters. But Bugzilla is unable to send emails. It always reports "Could not authenticate user". How to know the details of the error? Everything we configured are working fine when used in another system. Can you please point out the location of the log file Any points to troubleshoot the issue is greatly appreciated.

  Read the article

• Creating a list based on a column

  - by MikkoP

  I need to create a dropdown list in sheet A based on the values in sheet B in column A. I clicked on the A column in B sheet and named it as Models. Then I clicked on the cell in sheet A where I wanted the list to be and selected Data -> Data validation -> Data validation. In the Settings page I selected List in the Allow section, checked Ignore blank and In-cell dropdown. In the Source section I inserted =Models. This way I get all the right values plus a lot of blank values. How do I prevent the blank lines from appearing in the list?

  Read the article

• Disable MathML output of eLyXer

  - by Gryllida

  eLyXer is a standalone LyX to HTML converter. In the resulting file, equations are formatted as MathML, and the file itself starts with an XML tag. This causes two problems: LibreOffice does not read the XML file (it can read HTML files, but not XHTML). I am unable to copy and paste the equations into a document editor such as LibreOffice with the goal of subsequent conversion into .doc, because .doc files do not support MathML. The eLyXer help page mentions an option to only use simple math, but there is no option to set math equations to output as images. And I already set Document Settings Output Math equations Format: images in LyX, which presumably is saved in the lyx document somewhere. A web search did not come up with any solutions.

  Read the article

• How can I make full-screen desktop applications only cover the snapped desktop?

  - by nhinkle

  In Windows 8, you can "snap" two apps next to each other, and one of those apps can be the legacy Windows desktop environment. A convenient application for this (or so I thought) would be to snap a chat client, small browser, or other app while watching content in full-screen on the desktop. The problem with this is that full screen desktop applications will take over the entire screen, even if the desktop is snapped to only occupy 3/4th of the display. What I would like is some way to force "full screen" desktop apps to only cover the snapped desktop area, and to truly go full screen if the desktop is snapped to full-width. Is there some way to configure this? If that didn't make sense, let me illustrate with pictures: Desktop in snapped view with SU chat in mini-browser: What happens when you click "full screen": What I want to happen when I click "full screen" (note this is digitally altered, not a real screenshot)

  Read the article

• IE session (-nomerge) management application?

  - by skrco

  I'm in need of an application that can manage multiple Internet Explorer instances (to be precise nomerge sessions) like you can in Remote Desktop Manager with RDPs. This app should host them in single window and arrange IE instances e.g. in tabs or lists. OK, in Remote Desktop Manager you can create Web session, but in embedded mode you cannot set the nomerge option - all windows and tabs share the same session. I've been searching the web, but with no results. So I put this question whether anyone know of such application or any workaround. Or I have to write my own app?

  Read the article

• Annotation of a pdf file in my dropbox in ipad and keep it the last version in dropbox

  - by Farshid

  I have a folder in my dropbox that i keep my ebooks in it. I want to find an app in ipad that can do these to me: Let me open a pdf file from my dropbox Let me annotate on that file Annotation getting applied to the dropbox version of my file, instead of creating a local copy that its changes does not affect the dropbox version In my pc, when i open a pdf file from my dropbox and make Some highlights, when i press the save button in acrobat reader, the dropbox version is instantly gets updated and whenever i open my dropbox folder i have the latest version of the file. I need similar functionality in my ipad. What ipad app do you recommand for gaining this functionality?

  Read the article

• How to Track CPU and Memory Usage Per Process

  - by Mjsk

  I have seen this question asked on here before but was unable to follow the answer which was given. I would like to monitor a processes CPU, Memory, and possibly GPU usage over a given time. The data would be useful if presented in a graph. It would be nice if I could do this using Performance Monitor, but I am open to alternative solutions as well. I have tried using Performance Monitor and my problem is that I'm not sure which performance counters to use since there are so many. I've been looking at a Process, Processor, Memory, etc. but I'm not sure which counters within those categories will be of interest to me. My OS is Windows 7.

  Read the article

• IBM Tivoli Network Manager IP Edition - Job does not run

  - by Thorsten Niehues

  Since our network discovery takes too long I tried to split the biggest job into two parts. The two parts use the same Perl script but have a different scope. I copied a Job (Agent) doing the following: Copied the .agnt file Copied the associated perl script The problem is that one or the other job (changes randomly) does not run. The Disco Process will fail eventually. In the log of the job which does not run I see the following error message: Wed Jul 18 08:48:54 2012 Warning: Failed to send on transport layer found in file CRivObjSockClient.cc at line 1293 - Client My_MacTable_Cis is not connected to service Helper How do I fix this problem?

  Read the article

• Opening NBF backup file?

  - by ellisgeek

  I have a backup file from before i reinstalled windows but am unable to open it because the file is a NBF. It was created with Acer Backup Manager which is a proprietary version of NTI's backup software. is there any way to open this? I have tried using NTI Backup Now! 4.x but it says the file is invalid. Acer Backup Manager will only let me restore the ENTIRE image (not what I want), and many hours of googling have left me empty handed.

  Read the article

• Windows 7 remote desktop encryption error every few minutes

  - by rfrankel

  Because of an error in data encryption, this session will now end. This is the error I've been getting more and more frequently over the past few days, to the point that I can't ignore it because it's happening consistently within 5 minutes of connecting - sometimes within a few seconds. Both the remote and local machines are Windows 7 Pro x64. The remote machine is behind a Linksys RV082, and I'm using UPnP to forward a remote port to the correct local port. This setup had been working fine for several months, and I can't think of any recent relevant changes that might have been made. Things I've already tried: Disabling unnecessary components of the network connection on the remote machine, until only IPv4 and Client for Microsoft Networks remain. Disabling TCP large send offload on both the remote and local machines. Confirming that the remote machine is not mentioned anywhere in any DMZ settings on the Linksys router. Confirming that there are no x509-related registry keys screwing things up (this is the suggested fix for a slightly different error anyway). These are the only solutions I've been able to find after about an hour of searching, and most of them apply to XP or Server 2003 in any case. If anyone could suggest something else, it would be much appreciated.

  Read the article

• VMware Workstation 7.x error loading operating system help

  - by StealthRT

  Hey all i am using the windows verison of VMware Workstation 7.x and I am getting this error when i start my VM error loading operating system That only started to happen when i tried to load that vmdk file into the program VirtualBox. Prior to this it ran just fine. Ever since then i have been unable to start it in VMware Workstation 7.x... I've already tried to repair the vmdk file but when i do it tells me there are no errors found? I used vmware-vdiskmanager.exe -R "c:\blah\my vm disk.vmdk" Anyone else have any more suggestions i could try? It's a 300+GB VM so i really don't want to lose it!!! Thanks, David

  Read the article

• Samba doesnt require password on xbmc but does on ubuntu

  - by Chris

  I have samba setup on a fedora 13 machine, and I use it to share with my xbmc client in the family room. When I set this up there no password or anything was required I merely entered in paths such as: smb://<host>/<share> and all worked. Now on my ubuntu 10.04 machine when I try to access the same hosts, for example through smbmount though I receive an error. smbmount //media/Music ~/Music/ # media is in my /etc/hosts and resolves to # correct IP address for the machine I receive error: operation not permitted after pressing enter when it prompts for password. Here is my entry from /etc/samba/smb.conf: [global] workgroup = WORKGROUP server string = Samba Server Version %v # log files split per-machine: log file = /var/log/samba/log.%m # maximum size of 50KB per log file, then rotate: max log size = 50 security = user passdb backend = tdbsam ; security = domain ; passdb backend = tdbsam ; realm = MY_REALM ; password server = <NT-Server-Name> ; security = user ; passdb backend = tdbsam ; domain master = yes ; domain logons = yes ; logon script = %m.bat ; logon script = %u.bat ; logon path = \\%L\Profiles\%u ; logon path = ; add user script = /usr/sbin/useradd "%u" -n -g users ; add group script = /usr/sbin/groupadd "%g" ; add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M -d /nohome -s /bin/false "%u" ; delete user script = /usr/sbin/userdel "%u" ; delete user from group script = /usr/sbin/userdel "%u" "%g" ; delete group script = /usr/sbin/groupdel "%g" ; local master = no ; os level = 33 ; preferred master = yes ; wins support = yes ; wins server = w.x.y.z ; wins proxy = yes ; dns proxy = yes load printers = yes cups options = raw ; printcap name = /etc/printcap # obtain a list of printers automatically on UNIX System V systems: ; printcap name = lpstat ; printing = cups ; map archive = no ; map hidden = no ; map read only = no ; map system = no ; store dos attributes = yes #============================ Share Definitions ============================== [homes] comment = Home Directories browseable = no writable = yes ; valid users = %S ; valid users = MYDOMAIN\%S # Un-comment the following and create the netlogon directory for Domain Logons: ; [netlogon] ; comment = Network Logon Service ; path = /var/lib/samba/netlogon ; guest ok = yes ; writable = no ; share modes = no # Un-comment the following to provide a specific roving profile share. # The default is to use the user's home directory: ; [Profiles] ; path = /var/lib/samba/profiles ; browseable = no ; guest ok = yes # A publicly accessible directory that is read only, except for users in the # "staff" group (which have write permissions): ; [public] ; comment = Public Stuff ; path = /home/samba ; public = yes ; writable = yes ; printable = no ; write list = +staff [tv] comment = TV path = /media/Isos/tv public = yes writable = yes printable = no write list = +media [music] comment = Music path = /media/Storage/music/ public = yes writable = yes printable = no write list = +media [pictures] comment = Pictures path = /media/Storage/pictures public = yes writable = yes printable = no write list = +media

  Read the article

• Regarding Unix Move Command

  - by user38993

  I need to write an Unix Shell Script tran.sh that moves the csv input files from /exp/files folder to /exp/ready directory. The csv input files are written to /exp/files folder by an FTP server whose behavior I cannot trivially change. In tran.sh shell script I need to ensure before doing a move of that csv input file from /exp/files directory no longer any other process is writing to the file. How can I do it.

  Read the article

• How can I scan from Canon PIXMA MX700 without disabling OS X firewall?

  - by Justin Love

  I have a Canon PIXMA MX700 connected by ethernet. When I first bought it I was using OS X 10.4, and scanner-initiated scanning worked fine. After upgrading to 10.6, neither scanner-initiated or scanning from MP Navigator EX works with the firewall enabled. The firewall lists exceptions for three applications: Canon IJ Network Scan Utility.app Canon IJ Network Scanner Selector.app MP Navigator EX 1.0.app I get no further blocked warnings, and /var/log/appfirewall.log lists nothing for today (my latest attempt to use it).

  Read the article

• Play Framework Plugin for NetBeans IDE

  - by Geertjan

  The start of minimal support for the Play Framework in NetBeans IDE 7.3 Beta would constitute (1) recognizing Play projects, (2) an action to run a Play project, and (3) classpath support. Well, most of that I've created already, as can be seen, e.g., below you can see logical views in the Projects window for Play projects (i.e., I can open all the samples that come with the Play distribution). Right-clicking a Play project lets you run it and, if the embedded browser is selected in the Options window, you can see the result in the IDE. Make a change to your code and refresh the browser, which immediately shows you your changes: What needs to be done, among other things: A wizard for creating new Play projects, i.e., it would use the Play command line to create the application and then open it in the IDE. Integration of everything available on the Play command line. Maybe the logical view, i.e., what is shown in the Projects window, should be changed. Right now, only the folders "app" and "test" are shown there, with everything else accessible in the Files window, as can be seen in the screenshot above. More work on the classpath, i.e., I've hardcoded a few things just to get things to work correctly. Options window extension to register the Play executable, instead of the current hardcoded solution. Scala integrations, i.e., investigate if/how the NetBeans Scala plugin is helpful and, if not, create different/additional solutions. E.g., the HTML templates are partly in Scala, i.e., need to embed Scala support into HTML. Hyperlinking in the "routes" file, as well as special support for the "application.conf" file. Anyone interested, especially if you're a Play fan (a "playboy"?), in joining me in working on this NetBeans plugin? I'll be uploading the sources to a java.net repository soon. It will be here, once it has been made publicly accessible: http://java.net/projects/nbplay/sources/nbplay Kind of cool detail is that the NetBeans plugin is based on Maven, which means that you could use any Maven-supporting IDE to work on this plugin.

  Read the article

• Congratulations to 2012 Innovation Award winners in BPM category

  - by Manoj Das

  Last year many of our customers went live on BPM 11g. It is my extreme pleasure to congratulate two of them – Amadeus and Navistar – for being awarded Oracle Fusion Middleware Innovation Award at Oracle OpenWorld 2012. We invited our customers to submit their most innovative BPM implementations that have delivered substantiated value to them. This year we saw more than 20 submissions from our customers seeing significant business value from their live BPM 11g deployments. The submissions came from across the world, spanning various industry verticals including manufacturing, healthcare, logistics, Hi-Tech, Public Sector, Education and covering many process usage patterns. Award submissions were evaluated based on the uniqueness of their business case, business benefits, level of impact relative to the size of the organization, complexity and magnitude of implementation, and the originality of architecture. Amadeus Team Receiving Innovation Award from Hasan Rizvi Congratulations to Amadeus and Navistar and their teams on being recognized from among some very strong submissions and more importantly for the business value delivered. It is an honor to be part of your success and to play a small role in the innovation you drive. Navistar is a leading truck manufacturing company which produces International® brand commercial and military trucks, MaxxForce® brand diesel engines, IC Bus™ brand school and commercial buses, and Navistar RV brands of recreational vehicles. The company also provides truck and diesel engine service parts. Amadeus is a leading transaction processor for the global travel and tourism industry, providing transaction processing power and technology solutions to both travellers and travel providers. Both Navistar and Amadeus have leveraged Oracle BPM Suite to improve visibility into their business and made their business more agile and efficient. We congratulate them again and wish them continued success in their business and future BPM initiatives.

  Read the article

• Is the way I'm implementing my genetic algorithm right?

  - by Mhjr

  In my graduation project, I am asked to use a genetic algorithm (any variation of it can be chosen) to generate valid timetables. What I did was make a simple program that generates unique sequences representing genes, the sequence is described below: (sorry if it's mathematically incorrect) The only variable in the sequence is the room element, so basically the program takes a tree that goes like this: [Course] -(contains)-> [Units] -(contains)-> [Offerings] -(contains)-> [Instructors] -(contains)-> [Rooms] Each course can have n units (duplicates). Each unit can have n offerings (lectures,lab session, excercises,...). Each offering has only 1 instructor. Each instructor (or the whole lecture composed from the four elements of the sequence) has multiple rooms. When a timetable is initialized, one of these sequences that differ in rooms will be taken into the timetable, so the difference in genes (sequences) of each timetable will be just the rooms random choice and the difference between chromosomes (timetables) will be time placements of these genes (sequences). My question is, before I proceed in implementing what I described, is it valid? Is the representation used here for chromosomes a permutation representation?

  Read the article

• Programming language specific package management systems

  - by m0nhawk

  There are some programming languages for which exist their own package management systems: CTAN for TeX CPAN for Perl Pip & Eggs for Python Maven for Java cabal for Haskell Gems for Ruby Is there any other languages with such systems? What about C and C++? (that's the main question!) Why there are no such systems for them? And isn't creating packages for yum, apt-get or other general package management systems better? UPD: And what about unification? Have someone tried to unify that "the zoo"? If yes, looks like that project didn't succeed.

  Read the article

• What can I do with the twitter API?

  - by aditya menon

  I've tried googling for this but could not find concrete developer examples. When building mundane daily web applications like Classified websites, Job boards or Intranet targeted Document Management Systems, how can the twitter API help me do more things. May I please have some examples on how developers have used twitter to make their apps better? Other than the obvious use for promotional and search engine optimization purpose (yay there's a new job post on our site), what can I do with it? Also, am I late to the party? I hear a lot of upset on the internet about how twitter is apparently slowly betraying developers (I don't understand the specifics), so should I even look at the system or consider alternatives?

  Read the article

• Can non-IT people learn and take advantage of regular expressions? [closed]

  - by user1598390

  Often times, not-IT people has to deal with massive text data, clean it, filter it, modify it. Often times normal office tools like Excel lack the tools to make complex search and replace operations on text. Could this people benefit from regexps ? Can regexp be taught to them ? Are regular expressions the exclusive domain of programmers and unix/linux technicians ? Can they be learned by non-IT people, given regexps are not a programming language? Is this a valid or achievable goal to make some users regexp-literate through appopriate training ? Have you have any experiences on this issue? and if so, have it been successful ?

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >