Daily Archives

Articles indexed Wednesday October 3 2012

Page 6/17 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

  • Oracle OpenWorld Healthcare Integration Session Highlights Challenges & Solutions

    - by Nitesh Jain
    In today’s session co-presented by Steve Schenks, Integration Architect from Ascension Health and Oracle’s Sundar Shenbagam and Suresh Sharma (apparently your initials must be SS to present during this session), interesting insights in many different areas including Steve’s descriptions of the challenges with their previous environment: Disparate hardware and software is an issue common across healthcare and most other industries…Larry Ellison spoke on this topic during Sundays’ keynote address.  In the last part of session, Suresh is planning to go over some of the best practices and lesson learned to implement successful healthcare applications and will discuss the different options to model Sequencing (FIF0) use cases (one of most common use cases in the provider market). The session was “Implementing Successful Healthcare Applications with Oracle SOA Suite” – Session # CON8546. For more information about this session, please contact Senior Principal Product Manager Suresh Sharma Ref : https://blogs.oracle.com/SOA/entry/oracle_openworld_healthcare_integration_session

    Read the article

  • ORACLE OPENWORLD - DAY 3 LINUX SESSIONS and ICE CREAM SOCIAL

    - by Zeynep Koch
    It had been two days of amazing sessions but we have more to come.  Day 3 will bring following sessions for Oracle Linux fans: Wed, October 3rd: Hands On Lab: Oracle Linux Package Management, 10:15am, Marriot Salon, 14/15 YB level Hands On Lab: Oracle Linux Storage Management, 12:45pm, Marriot Salon, 14/15 YB level Why Switch to Oracle Linux, 3:30pm, Moscone South #270 We also have a great Ice Cream Social to cool you down in this weather. Visit our Oracle Linux Pavilion, Moscone South #1033 between 1-2pm to see Partners that support Oracle Linux and Oracle VM and grab your ticket for an ice cream sponsored by QLogic. We look forward to seeing you in these great events.

    Read the article

  • New Whitepaper: Primer on Integrating with EBS 12 with Other Applications

    - by Rekha Ayothi
    Oracle E-Business Suite offers several integration points and a variety of integration technologies. While a given integration point may be available through various technologies and products, it is important to select the best approach for your specific integration requirements. I am pleased to announce the publication of a new white paper that can help with this: Oracle E-Business Suite Release 12.1.3 - Integration Products and Technologies Primer (Note 1494997.1) This whitepaper reviews integration strategies for Oracle E-Business Suite applications that are available today. The intended audience is solution architects, integration consultants, and anyone else interested in learning about integration options with Oracle E-Business Suite. The white paper outlines the following enterprise application integration styles: Data-centric integration Integration through native interfaces Process-centric integration Event-driven integration B2B integration Integration through web services  The white paper also discusses Oracle E-Business Suite application layer products and technologies that address the specific needs of each of these integration styles. It concludes with criteria for selecting the appropriate integration-related tools and technologies for your requirements. Attending OpenWorld 2012? We have two sessions covering Oracle E-Business Suite integration. Please join us to hear more on this subject: CON9005 - Oracle E-Business Suite Integration Best Practices ( Tuesday, Oct 2, 1:15 PM - 2:15 PM - Moscone West 2018) CON8716 - Web Services and SOA Integration Options for Oracle E-Business Suite ( Thursday, Oct 4, 11:15 AM - 12:15 PM - Moscone West 2016)  Related Articles E-Business Suite Technology Sessions at OpenWorld 2012 Webcast Replay Available: SOA Integration Options for E-Business Suite BPEL 11.1.1.6 Certified for Prebuilt E-Business Suite 12.1.3 SOA Integrations New Whitepaper: Defining Web Applications Desktop Integrators That Return Error Messages

    Read the article

  • Open World Session - BPM, SOA and ADF Combined:Patterns learned from Fusion Applications

    - by mesriniv
    Blog by Meera Srinivasan (Oracle Product Management) Today afternoon (10/2/2012), Mohan Kamath, and I (Meera Srinivasan) delivered an Open World session on how Oracle Fusion Applications (the next generation business applications from Oracle), use Oracle BPM, Oracle SOA and Oracle ADF products. These adoption patterns can be applied in a generic manner to produce process-centric, user-centric, highly customizable and extensible next generation application. The session was well attended and we had lively discussions with the attendees during Q & A. We started with why as an application developer, you should look at BPM for creating a process-centric application and presented the following fusion adoption patterns Model driven agile development Customization and Extension Guided Process Interactions Personalization and Customization of End User Interfaces Approval Flows Fusion HCM, On Boarding Process - Activity Guide Interface was used as an example for the Guided Process Interactions adoption pattern and the Fusion CRM BPM Process Templates for Customization adoption pattern. In the Personalization and Customization of End User Interfaces section, we looked at how ADF is used within Oracle BPM and the various options available to customize end user interfaces. We also presented how Oracle Procurement does complex approvals using Rules and Approval Management Extensions. We hope you found the session useful, and please do try to attend Heidi’s session on dynamic case management: Case Management Patterns with Oracle Unified Business Process Management Suite. Marriott Marquis - Salon 7, Thu 11:15 AM - 12:15 PM

    Read the article

  • Identity Management: The New Olympic Sport

    - by Naresh Persaud
    How Virgin Media Lit Up the London Tube for the Olympics with Oracle If you are at Open World and have an interest in Identity Management, this promises to be an exciting session. Wed, October 3rd Session CON3957: Delivering Secure Wi-Fi on the Tube as an Olympics Legacy from London 2012 Session Time: 11:45am-12:45pm Session Location: Moscone West L3, Room 3003 Speakers: Perry Banton - IT Architect, Virgin Media                    Ben Bulpett - Director, aurionPro SENA In this session, Virgin Media, the U.K.'s first combined provider of broadband, TV, mobile, and home phone services, shares how it is providing free secure Wi-Fi services to the London Underground, using Oracle Virtual Directory and Oracle Entitlements Server, leveraging back-end legacy systems that were never designed to be externalized. As an Olympics 2012 legacy, the Oracle architecture will form a platform to be consumed by other Virgin Media services such as video on demand. Click here for more information.

    Read the article

  • Oracle Exadata X3 announcement at Oracle Openworld

    - by Javier Puerta
    Oracle Announces Oracle Exadata X3 Database In-Memory MachineOracle Press ReleaseFourth Generation Exadata X3 Systems are Ideal for High-End OLTP, Large Data Warehouses, and Database Clouds; Eighth-Rack Configuration Offers New Low-Cost Entry Point During his opening keynote address at Oracle OpenWorld, Oracle CEO, Larry Ellison announced the Oracle Exadata X3 Database In-Memory Machine - the latest generation of its Oracle Exadata Database Machines. The Oracle Exadata X3 Database In-Memory Machine is a key component of the Oracle Cloud. Oracle Exadata X3-2 Database In-Memory Machine and Oracle Exadata X3-8 Database In-Memory Machine can store up to hundreds of Terabytes of compressed user data in Flash and RAM memory, virtually eliminating the performance overhead of reads and writes to slow disk drives, making Exadata X3 systems the ideal database platforms for the varied and unpredictable workloads of cloud computing. In order to realize the highest performance at the lowest cost, the Oracle Exadata X3 Database In-Memory Machine implements a mass memory hierarchy that automatically moves all active data into Flash and RAM memory, while keeping less active data on low-cost disks. With a new Eighth-Rack configuration, the Oracle Exadata X3-2 Database In-Memory Machine delivers a cost-effective entry point for smaller workloads, testing, development and disaster recovery systems, and is a fully redundant system that can be used with mission critical applications. Detailed info at Oracle Exadata Database Machine

    Read the article

  • How to use TFS as a query tracking system?

    - by deostroll
    We already use tfs for managing defects in code etc, etc. We additionally need a way to "understand the domain & requirements of the products". Normally, without tfs we exchange emails with the consultants and have the questions/queries answered. If it is a feature implementation we sometimes "find" conflicts in the implementation itself. And when that happens the userstory is modified and the enhancement/bug as per that is raised in TFS. Sometimes it is critical we come back to decisions we made or questions we wanted answers to. Hence we need to be able to track how that "requirement idea" or that "query in concern" evolved. Hence how is it that we can use TFS to track all of this? Do we raise an "issue" item for this? Or do we raise a "bug" item? The main things we'd ideally look in a query tracking system are as follows: Area: Can be a module, submodule, domain. Sometimes this may be "General" - to address domain related stuff, or, event more granular to address modules, sub-modules. Take the case for the latter, if we were tracking this in excel sheets, we'd just write module1,submodule2; i.e. in a comma separated fashion. The things I would like here is to be able search for all queries relating to submodule2 sometime in the future. Responses: This is a record of conversations between the consultant and any other stakeholder. For a simple case, it would just be paragraphs. Each para would start with a name and date enclosed in brackets and the response following that...each para would be like a thread - much like a forum thread Action taken: We'd want to know how the query was closed, what was the input given, what were the changes that took place because of that, etc etc. These are fields I think I would need in such a system apart from some obvious ones like status, address to, resovled by, etc. I am open for any other fields which are sort of important. To summarise my question: how can we manage "queries" in the system? Where should we ideally store data pertaining to those three fields I have mentioned above (for e.g. is it wise to store responses in the history tag assuming we are opening a bug for the query)?

    Read the article

  • What reasons are there for not using a third party version control service?

    - by Earlz
    I've recently noticed a bit of a trend for my projects as of late. I use to run my own SVN server on my VPS, but recently the nail went in the coffin for that when I got my last project migrated from my server to a Mercurial repo on Bitbucket. What are some of the ramifications to this? (disregarding the change in version control systems) It seems like there has been a huge explosion in version control hosting, and companies like Bitbucket even offer private repos for free, and Github and other such services are extremely cheap now. Also, by using them you get the benefit of their infrastructure's speed and stability. What reasons are there these days to host your own version control? The only real reason I can think of is if your source code is super top secret.

    Read the article

  • Ruby: how to step through ruby code

    - by user1647484
    I'm trying to learn how to step through Ruby code (written by more experienced programmers) in order to improve my knowledge of Ruby. Problem is that I don't really know how to do it well. Googling the topic brought me to an about.com page on Ruby; I thought a higher quality more comprehensive answer should belong on StackOverflow, so if anyone can write an answer (with an example) for it, showing how a beginner can step through code to learn as much as possible about it, it'd be much appreciated.

    Read the article

  • Methodology to understanding JQuery plugin & API's developed by third parties

    - by Taoist
    I have a question about third party created JQuery plug ins and API's and the methodology for understanding them. Recently I downloaded the JQuery Masonry/Infinite scroll plug in and I couldn't figure out how to configure it based on the instructions. So I downloaded a fully developed demo, then manually deleted everything that wouldn't break the functionality. The code that was left allowed me to understand the plug in much greater detail than the documentation. I'm now having a similar issue with a plug in called JQuery knob. http://anthonyterrien.com/knob/ If you look at the JQuery Knob readme file it says this is working code: $(function() { $('.dial') .trigger( 'configure', { "min":10, "max":40, "fgColor":"#FF0000", "skin":"tron", "cursor":true } ); }); But as far as I can tell it isn't at all. The read me also says the Plug in uses Canvas. I am wondering if I am suppose to wrap this code in a canvas context or if this functionality is already part of the plug in. I know this kind of "question" might not fit in here but I'm a bit confused on the assumptions around reading these kinds of documentation and thought I would post the query regardless. Curious to see if this is due to my "newbi" programming experience or if this is something seasoned coders also fight with. Thank you. Edit In response to Tyanna's reply. I modified the code and it still doesn't work. I posted it below. I made sure that I checked the Google Console to insure the basics were taken care of, such as not getting a read-error on the library. <!DOCTYPE html> <meta charset="UTF-8"> <title>knob</title> <link rel="stylesheet" href="http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/themes/hot-sneaks/jquery-ui.css" type="text/css" /> <script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.js" charset="utf-8"></script> <script src="https://ajax.googleapis.com/ajax/libs/jqueryui/1.8.21/jquery-ui.min.js"></script> <script src="js/jquery.knob.js"></script> <div id="button1">test </div> <script> $(function() { $("#button1").click(function () { $('.dial').trigger( 'configure', { "min":10, "max":40, "fgColor":"#FF0000", "skin":"tron", "cursor":true } ); }); }); </script>

    Read the article

  • Questions re: Eclipse Jobs API

    - by BenCole
    Similar to http://stackoverflow.com/questions/8738160/eclipse-jobs-api-for-a-stand-alone-swing-project This question mentions the Jobs API from the Eclipse IDE: ...The disadvantage of the pre-3.0 approach was that the user had to wait until an operation completed before the UI became responsive again. The UI still provided the user the ability to cancel the currently running operation but no other work could be done until the operation completed. Some operations were performed in the background (resource decoration and JDT file indexing are two such examples) but these operations were restricted in the sense that they could not modify the workspace. If a background operation did try to modify the workspace, the UI thread would be blocked if the user explicitly performed an operation that modified the workspace and, even worse, the user would not be able to cancel the operation. A further complication with concurrency was that the interaction between the independent locking mechanisms of different plug-ins often resulted in deadlock situations. Because of the independent nature of the locks, there was no way for Eclipse to recover from the deadlock, which forced users to kill the application... ...The functionality provided by the workspace locking mechanism can be broken down into the following three aspects: Resource locking to ensure multiple operations did not concurrently modify the same resource Resource change batching to ensure UI stability during an operation Identification of an appropriate time to perform incremental building With the introduction of the Jobs API, these areas have been divided into separate mechanisms and a few additional facilities have been added. The following list summarizes the facilities added. Job class: support for performing operations or other work in the background. ISchedulingRule interface: support for determining which jobs can run concurrently. WorkspaceJob and two IWorkspace#run() methods: support for batching of delta change notifications. Background auto-build: running of incremental build at a time when no other running operations are affecting resources. ILock interface: support for deadlock detection and recovery. Job properties for configuring user feedback for jobs run in the background. The rest of this article provides examples of how to use the above-mentioned facilities... In regards to above API, is this an implementation of a particular design pattern? Which one?

    Read the article

  • SQL Triggers and when or when not to use them.

    - by John Mitchell
    When I was originally learning about SQL I was always told, only use triggers if you really need to and opt to use stored procedures instead if possible. Now unfortunately at the time (a good few years ago) I wasn't as curious and caring about fundamentals as I am now so never did ask to the reason why. What's the communities opinion in this? Is it just someone's personal preference, or should triggers be avoided (just like cursors) unless there is a good reason for them.

    Read the article

  • Read-only filesystem

    - by János Harsányi
    I've resized a partition (ext4) from a Live CD with GParted, and after reboot it says that the file system is read-only. I've rebooted again from the CD and checked it with GParted with no errors. How could I find out why does it re-mount the file system in read-only mode? edit: It starts normally, but after some time, the "/" mount point gets remounted with read only settings, so I think it does have errors eventually. Is there any other way to repair it?

    Read the article

  • Hardware settings reviewing

    - by dino99
    Get some hardware related errors logged into dmesg: oem@dub:~$ dmesg | grep ata10 [ 1.007989] ata10: PATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 18 [ 1.691664] ata10: prereset failed (errno=-19) [ 1.691670] ata10: reset failed, giving up oem@dub:~$ dmesg | grep ata2 [ 0.990290] ata2: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfb980 irq 45 [ 1.688011] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.688055] ata2.00: unsupported device, disabling [ 1.688057] ata2.00: disabled As I understand, its related to my old Seagate SATA HDD, and the PATA CDROM. These errors are quite new, so I feel that their settings (dma, write-cache, ...) have been modified by some upgrades. I've already used hdparm to set write-cache off on the HDDs. But it seems like I need to review some other setting(s) too. With oldest distro it was easy to know about the hardware settings, but now on Quantal/Precise its deeply hidden for the average user. So i would like to know how to view/modify these settings. About the CDROM reader, the problem is different: - the system don't identify it with an UUID; but only with ATAPI or by-id oem@dub:~$ dmesg|grep 'ATAPI' [ 1.308611] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S203D, SB00, max UDMA/100 oem@dub:~$ ls -l /dev/disk/by-id/ ...... lrwxrwxrwx 1 root root 9 oct. 1 06:42 ata-TSSTcorp_CDDVDW_SH-S203D -> ../../sr0 .....

    Read the article

  • Webmin no route to host

    - by xloumbos
    Using Webmin ? Network Configuration, I added a new DNS address to the existing server (10.100.200.300). While I saved the new configuration, I lost access to webmin and ssh to this server. How can I retrieve access? I pinged 10.100.200.300 and its dead. When I tried to login with ssh it says: error no route to host. I usually log in to webmin the server IP address and port 10000 but now I cannot. Any help to go back to my previous state?

    Read the article

  • Automount of external hard disk

    - by moose
    I have an Intenso 6002560 1TB Memory Station - an external hard disk. This hard disk gets connected via Y-USB cable. When I connect both USB-ends to my Notebook, it gets recognized by my Ubuntu 10.04.4 LTS system: moose@pc07:~$ lsusb [...] Bus 002 Device 005: ID 13fd:1840 Initio Corporation [...] and Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00065e10 Device Boot Start End Blocks Id System /dev/sda1 * 1 37810 303704064 83 Linux /dev/sda2 37810 38914 8864769 5 Extended /dev/sda5 37810 38914 8864768 82 Linux swap / Solaris Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0d6ea32a Device Boot Start End Blocks Id System /dev/sdc1 1 121601 976759008+ c W95 FAT32 (LBA) But it did not get mounted: moose@pc07:/dev$ mount -l /dev/sda1 on / type ext4 (rw,errors=remount-ro,user_xattr) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/moose/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=moose) However, I could mount it manually with mount -t vfat /dev/sdc1 /mnt/sdc1 as you can see here: moose@pc07:~$ mount -l /dev/sda1 on / type ext4 (rw,errors=remount-ro,user_xattr) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/moose/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=moose) /dev/sdc1 on /mnt/sdc1 type vfat (rw) edit: Another command: moose@pc07:~$ sudo blkid -o list device fs_type label mount point UUID ---------------------------------------------------------------------------------------------------------------------- /dev/sda1 ext4 / 45eb611b-517e-425b-8057-0391726cccd5 /dev/sda5 swap <swap> e9dc42f3-594c-4b62-874a-305eda5eed41 moose@pc07:~$ blkid -o list device fs_type label mount point UUID ---------------------------------------------------------------------------------------------------------------------- /dev/sda1 ext4 / 45eb611b-517e-425b-8057-0391726cccd5 /dev/sda5 swap <swap> e9dc42f3-594c-4b62-874a-305eda5eed41 /dev/sdc1 /mnt/sdc1 edit: another command: moose@pc07:~$ ls -l /dev/disk/by-uuid/ total 0 lrwxrwxrwx 1 root root 10 2012-09-30 09:31 45eb611b-517e-425b-8057-0391726cccd5 -> ../../sda1 lrwxrwxrwx 1 root root 10 2012-09-30 09:31 e9dc42f3-594c-4b62-874a-305eda5eed41 -> ../../sda5 Here is a link to a Launchpad question about this problem. But I would like it to mount automatically. What do I have to do?

    Read the article

  • Problem adding a ppa

    - by Roman Rdgz
    I want to install gcc compiler 4.7 to use c++11 features. I have looked on the internet for instructions, and I found in several websites these steps: sudo add-apt-repository ppa:Ubuntu-toolchain-r/test sudo apt-get update sudo apt-get install gcc-4.7 g++-4.7 The problem is that my console freezes when adding the ppa. At first I thought it was due to having an old Ubuntu version (11.04). So I have upgraded to 11.10 and then 12.04, and everything seems to work OK. But still having the same problem. Any help?

    Read the article

  • Why Ubuntu is not booting anymore from USB live?

    - by xRobot
    I have just purchased a brand new laptop Samsung 300e5c with Windows 7. So I have reduce the windows partition and I have installed ubuntu 12.04 from my USB pen drive. Then I have tried to boot again from USB pen drive but it doesn't work anymore. I have tryed to boot on others laptop from my USB pen drive and it does work perfectly. but on my laptop, NO :(. I have set all USB drive as first boot device in BIOS. I have tryed on each USB port of my laptop but it doesn't work. Only the first time it did work when I installed ubuntu and now it doesn't work anymore. It's very strange I can see the content of the usb pen drive on my laptop and on others laptop without problems. why it doesn't work anymore ?

    Read the article

  • Bootloader error Ubuntu 12.04, system goes to Grub-rescue instead of booting

    - by user83508
    I am trying to install ubuntu 12.04 on my system but it is constantly giving me bootloader install fail error. I have tried to lot to solve this issue but reading articles over the internet but still no gain. Firstly since the bootloader was not getting installed I tried to install it on all the alternative paths given in the installer, failing with I selected install ubuntu without bootloader. Then I tried to manually install bootloader via terminal at try ubuntu via grub-install, but I was not able to do that. Then I tried using boot-repair and it was also not able to install the bootloader because after it my system shows grub-rescue. I tried to use boot-repair and install bootloader on a seperate partition mounted to /boot and still my system is booting and it still shows grub-rescue. The error which my system shows during boot is: Error : no such device : 04ac0510-bd4f-43b8-b885-b885-11c4dec21db8 I am not dual booting and ubuntu is the only OS I am installing. I am using Raid 0 with two blue western digital hard drive so I am not sure whether it is right or not. The details given by boot-repair are in the below mentioned link; http://paste.ubuntu.com/1147208/ Afterwards, I made one more change I installed ubuntu again and this time I installed the bootloader at a different partition on /boot. After this the bootloader error has gone but I am still not able to boot to ubuntu as I get the same error I was getting before. I have not installed dmraid, I feel it is neccessary for Raid0, but I thought ubuntu already has Raid drivers. Moreover in the dmraid installation instructions for 12.04, I used the one for 10.04 and selected to install bootloader at the partitions from the dropdown. This time the installation finished normally without an error but still I am not able to boot my system as the same error shows during booting this time also. Now I am stucked and I have no clue on how I can boot my system. Please tell me how can I boot my system.

    Read the article

  • Screen flickering / scrambling on an Asus UL30A

    - by user55059
    Recently my Laptop screen started to flicker. You can view the phenomena here: YouTube Sometimes the screen is totally scrambled, but most of the time it starts with the Title bar only. It happens inconsistently. My Laptop is Asus UL30A and I'm using Ubuntu 11.10. Output from command: sudo lshw -C display; lsb_release -a; uname -a; xrandr *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:fe400000-fe7fffff memory:d0000000-dfffffff ioport:dc00(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:fe800000-fe8fffff LSB Version: core-2.0-ia32:core-2.0-noarch:core-3.0-ia32:core-3.0-noarch:core-3.1-ia32:core-3.1-noarch:core-3.2-ia32:core-3.2-noarch:core-4.0-ia32:core-4.0-noarch Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric Linux steelke 3.0.0-14-generic-pae #23-Ubuntu SMP Mon Nov 21 22:07:10 UTC 2011 i686 i686 i386 GNU/Linux Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 293mm x 164mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) I already rolled back the kernel to 3.0.0-14 instead of 3.0.0-17 as mentioned in this post, but without result. I guess the problem is related to the driver, because I don't see similar behaviour in the BIOS Setup. Any tips or help is welcome.

    Read the article

  • accessing files on a shared folder via IIS

    - by Darkcat Studios
    Im not sure if this suits stackexchange, serverfault or here... so i'll go with here for a start. I'm having issues setting up a network share to be accessed by IIS, all I need to do is read/write files on the Other server. We have 2 servers set up (Both 2008 R2 & IIS 7.5), one is the WEB server, which is externally accessible and NOT part of the domain. We also have an Intranet server which has no internet connectivity and is part of the domain. These 2 servers can talk to each other happily, I have the SQL server on the WEB server shared across to the intranet server so that the web content is editable from the intranet. I can share a folder on the web server (say, wwwroot/Images/) and connect to it from the intranet server, even have it as a mapped drive (but i know thats not going to work for IIS to access it), So there seems not to be a connectivity issue. I can also set up a Virtual folder in IIS on the Intranet server - this is where it gets annoying - I cant connect using pass-through authentication because there is no suitable user on the web server (which is not on the domain). If i set up a user on the web server, eg Intranet_USR, and give it appropriate rights to the folder, files and share, i can connect, but only view folder contents in IIS, not read, although that user has read privileges!! Any help much appreciated!

    Read the article

  • How can I redirect all files in a directory that doesn't conform to a certain filename structure?

    - by user18842
    I have a website where a previous developer had updated several webpages. The issue is that the developer had made each new webpage with new filenames, and deleted the old filenames. I've worked with .htaccess redirects for a few months now, and have some understanding of the usage, however, I am stumped with this task. The old pages were named like so: www.domain.tld/subdir/file.html The new pages are named: www.domain.tld/subdir/file-new-name.html The first word of all new files is the exact name of the old file, and all new files have the same last 2 words. www.domain.tld/subdir/file1-new-name.html www.domain.tld/subdir/file2-new-name.html www.domain.tld/subdir/file3-new-name.html ect. We also need to be able to access the url: www.domain.tld/subdir/ The new files have been indexed by google (the old urls cause 404s, and need redirected to the new so that google will be friendly), and the client wants to keep the new filenames as they are more descriptive. I've attempted to redirect it in many different ways without success, but I'll show the one that stumps me the most RewriteBase / RewriteCond %{THE_REQUEST} !^subdir/.*\-new\-name\.html RewriteCond %{THE_REQUEST} !^subdir/$ RewriteRule ^subdir/(.*)\.html$ http://www.domain.tld/subdir/$1\-new\-name\.html [R=301,NC] When visiting www.domain.tld/subdir/file1.html in the browser, this causes a 403 Forbidden error with a url like so: www.domain.tld/subdir/file1-new-name-new-name-new-name-new-name-new-name-new-name-new-name-new-name-new-name-new-name-new-name-new-name-new-name.html I'm certain it's probably something simple that I'm overlooking, can someone please help me get a proper redirect? Thanks so much in advance! EDIT I've also got all the old filenames saved on a separate document in case I need them set up like the following example: (file(1|2|3|4|5)|page(1|2|3|4|5)|a(l(l|lowed|ter)|ccept)

    Read the article

  • Custom shadow mapping in Unity 3D Free Edition

    - by nosferat
    Since real time hard and soft shadows are Unity 3D Pro only features I thought I will learn Cg programming and create my own shadow mapping shader. But after some digging I found that the shadow mapping technique uses depth textures, and in Unity depth values can be accessed through a Render Texture object, which is Unity Pro only again. So is it true, that I cannot create real time shadow shaders as a workaround to the limitations of the free version?

    Read the article

  • Entity System and rendering

    - by hayer
    Okey, what I know so far; The entity contains a component(data-storage) which holds information like; - Texture/sprite - Shader - etc And then I have a renderer system which draws all this. But what I don't understand is how the renderer should be designed. Should I have one component for each "visual type". One component without shader, one with shader, etc? Just need some input on whats the "correct way" to do this. Tips and pitfalls to watch out for.

    Read the article

  • Texture not rendering in correct order in xna 4?

    - by user1090751
    I am making a simple board game. In the game there is a fixed background called myTexture and others are textureGoat and textureTiger whicha are to be placed on top of the background(myTexture). But i am having problem that fourth and fifth component is not displaying however, the sixth component( i.e. myTexture) is appearing. Here is my code, please look at it protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.Green); // TODO: Add your drawing code here spriteBatch.Begin(SpriteSortMode.BackToFront, BlendState.AlphaBlend); //placing tiger spriteBatch.Draw(textureTiger, new Rectangle(22, 25, 50, 50), Color.White);//first component spriteBatch.Draw(textureTiger, new Rectangle(22, 407, 50, 50), Color.White);//second component spriteBatch.Draw(textureTiger, new Rectangle(422, 25, 50, 50), Color.White);//third component spriteBatch.Draw(textureTiger, new Rectangle(422, 407, 50, 50), Color.White);//fourth component //placing goat spriteBatch.Draw(textureGoat, new Rectangle(125, 110, 50, 50), Color.White);//fifth component //placing background spriteBatch.Draw(myTexture, new Rectangle(0, 0, 500, 500), Color.White);//sixth component spriteBatch.End(); base.Draw(gameTime); }

    Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >