Monthly Archives

Articles indexed in October 2013

Page 79/261 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

• nginx dynamic servername with regular expression doesn't work for co.uk

  - by redn0x

  I'm trying to setup a nginx server which dynamically loads content from a folder for a domain. To do this I'm using regular expressions in the server name like so: server_name ((?<subdomain>.+)\.)?(?<domain>.+)\.(?<tld>.*); This will create a 3 variables for nginx to use later on, for example when using the following url: test.foo.example.com this will evaluate to: $subdomain = test.foo $domain = example $tld = com The problem arises when the co.uk top-level domain is used. In this case when using the url test.foo.example.co.ukit will evaluate to: $subdomain = test.foo.cedira $domain = co $tld = uk How can I edit the regular expression so that it will also work for co.uk?

  Read the article

• Elastic Beanstalk and IIS logs

  - by user195744

  I have an ELB app and when logging into an instance and looking at the IIS logs I see something like the following: 2013-10-18 17:14:25 10.240.27.2 GET /FSViewer/Img.aspx trcid=451847431&vhtid=391833142 80 - 10.210.107.159 Mozilla/5.0+(compatible;+MSIE+10.0;+Windows+NT+6.1;+WOW64;+Trident/6.0) 200 0 0 140 The 10.240.27.2 address always repeated, which is the load balancer? So how do I find out the IP addresses that are hitting my server?

  Read the article

• Increase the compression performance of VPN

  - by Martin

  I am currently switching from a system with HPN-SSH tunnels and enabled compression to something VPN based. I have tried tinc and n2n so far, hamachi requires a library I do not have. In my primitive benchmarks I am not satisfied with the achievable bandwidth compared to the SSH tunnels. In tinc the low LZO setting performed best, but compression is only available in UDP mode. Ideally I would like to have a TCP-based VPN with a multi-threaded compression. Can you suggest me some ideas how to increase the performance? Would it be possible to somehow put a compression filter in front of the tun interface? Or are there any VPN implementations that might be better suited for my needs (fast compression, TCP-based, switch mode, does not have to be super-secure)? I would consider tunnelling Ethernet over SSH, but according to some articles it is not advisable.

  Read the article

• mysql-proxy got error which cause it to crash

  - by nonus25

  I got that message and i dont know what it is means: Oct 21 12:24:26 lex mysql-proxy: 2013-10-21 12:24:26: ((error)) last message repeated 98 times Oct 21 12:24:26 lex mysql-proxy: 2013-10-21 12:24:26: ((error)) network-mysqld-packet.c.596: COM_(0x04) should not be (OK|ERR|NULL), got: 00 Oct 21 12:24:26 lex kernel: [4163416.207121] mysql-proxy[14271] trap int3 ip:7ff96e8a4313 sp:7fffb9086ad0 error:0 Any idea what can be the cause of it ?

  Read the article

• Why does my mail get marked as spam?

  - by schoen

  I Have the server "afspraakmanager.be". It matches everything not to be a spam server.(it isn't by the way): it has reverse dns, spf,dkim,... . But hotmail marks it as spam. I think the problem is the SPF/DKIM records. when i sent an email to my gmail it says: "Received-SPF: neutral (google.com: 2a02:348:8e:6048::1 is neither permitted nor denied by best guess record for domain of [email protected]) client-ip=2a02:348:8e:6048::1; Authentication-Results: mx.google.com; spf=neutral (google.com: 2a02:348:8e:6048::1 is neither permitted nor denied by best guess record for domain of [email protected]) [email protected]; dkim=neutral (bad format) [email protected]" So i guess my SPF and DKIM records aren't set up right. But I also don't have a clue what is wrong with them. this is the zone file: ; zone file for afspraakmanager.be $ORIGIN afspraakmanager.be. $TTL 3600 @ 86400 IN SOA ns1.eurodns.com. hostmaster.eurodns.com. ( 2013102003 ; serial 86400 ; refresh 7200 ; retry 604800 ; expire 86400 ; minimum ) @ 86400 IN NS ns1.eurodns.com. @ 86400 IN NS ns2.eurodns.com. @ 86400 IN NS ns3.eurodns.com. @ 86400 IN NS ns4.eurodns.com. ; Mail Exchanger definition @ 600 IN MX 10 smtp ; IPv4 Address definition @ IN A 37.230.96.72 afspraakmanager.be 600 IN A 37.230.96.72 localhost 86400 IN A 127.0.0.1 smtp 600 IN A 37.230.96.72 www 600 IN A 37.230.96.72 ; Text definition default._domainkey 600 IN TXT "v=DKIM1\\; k=rsa\\; p=MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQC6pvlZKnbSVXg1Bf3MF2l8xRrKPmqIw2i9Rn1yZ3HEny9qH1vyGXUjdv2O0aQbd5YShSGjtg5H/GedRMLpB0Qb+hBj1yGofOQTdcVtZZfj8qBY5Z7vEkhvtdaogQ0vLjgcwhg0BBuTewEkLxrl9IIzkPMZ1SCtM2Y0RtiUhg2cjQIDAQAB" ; Sender Policy Framework definition afspraakmanager.be 600 IN SPF "v=spf1 a mx ptr +all" The DKIM signature in the header: DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=afspraakmanager.be; s=mail; t=1382361029; bh=4pDpXBY8rCbX8+MfrklZzpQxaUsa3vSPUYjcDR3KAnU=; h=Date:From:To:Subject:From; b=SoBBaAlrueD8qID8txl2SBSqnZgN2lkPCdSPI/m7/YLezIcBedkgIX1NswYiZFl6Z AmF8dES73WUaaJjItVHSrdCJK2mJ/Az+vrgNsyk+GqZZ1YPiIlH3gqRrsguhoofXUX /gqLlqsLxqxkKKd9EbSzKRHuDGlJCLm5SlL8wnL0=

  Read the article

• Vagrant-aws not provisioning

  - by SuperCabbage

  I'm trying to spin up and provision an EC2 instance with Vagrant, it successfully creates the instance up and I can then use vagrant ssh to SSH into the it but Puppet doesn't seem to carry out any provisioning. Upon running vagrant up --provider=aws --provision I get the following output Bringing machine 'default' up with 'aws' provider... WARNING: Nokogiri was built against LibXML version 2.8.0, but has dynamically loaded 2.9.1 [default] Warning! The AWS provider doesn't support any of the Vagrant high-level network configurations (`config.vm.network`). They will be silently ignored. [default] Launching an instance with the following settings... [default] -- Type: m1.small [default] -- AMI: ami-a73264ce [default] -- Region: us-east-1 [default] -- Keypair: banderton [default] -- Block Device Mapping: [] [default] -- Terminate On Shutdown: false [default] Waiting for SSH to become available... [default] Machine is booted and ready for use! [default] Rsyncing folder: /Users/benanderton/development/projects/my-project/aws/ => /vagrant [default] Rsyncing folder: /Users/benanderton/development/projects/my-project/aws/manifests/ => /tmp/vagrant-puppet/manifests [default] Rsyncing folder: /Users/benanderton/development/projects/my-project/aws/modules/ => /tmp/vagrant-puppet/modules-0 [default] Running provisioner: puppet... An error occurred while executing multiple actions in parallel. Any errors that occurred are shown below. An error occurred while executing the action on the 'default' machine. Please handle this error then try again: No error message I can then SSH into the instance by using vagrant ssh but none of my provisioning has taken place, so I'm assuming that errors have occured but I'm not being given any useful information relating to them. My Vagrantfile is as following; Vagrant.configure("2") do |config| config.vm.box = "ubuntu_aws" config.vm.box_url = "https://github.com/mitchellh/vagrant-aws/raw/master/dummy.box" config.vm.provider :aws do |aws, override| aws.access_key_id = "REDACTED" aws.secret_access_key = "REDACTED" aws.keypair_name = "banderton" override.ssh.private_key_path = "~/.ssh/banderton.pem" override.ssh.username = "ubuntu" aws.ami = "ami-a73264ce" end config.vm.provision :puppet do |puppet| puppet.manifests_path = "manifests" puppet.module_path = "modules" puppet.options = ['--verbose'] end end My Puppet manifest is as following; package { [ 'build-essential', 'vim', 'curl', 'git-core', 'nano', 'freetds-bin' ]: ensure => 'installed', } None of the packages are installed.

  Read the article

• bind named server - forward some requests to other servers

  - by Pentium100

  Is there a way to make bind answer some queries but forward all other queries (of the same domain) to another server, as in: example.com A 127.0.0.1 www.example.com A 127.0.0.1 everything not on this list (example.com MX, ftp.example.com A etc) - ask 192.168.0.1 (another DNS server) Essentially I want to intercept some (but not all) queries going to (in this example) 192.168.0.1 and answer for it. example.com A- intercept www.example.com - intercept example.com MX - pass trough ftp.example.com - pass trough

  Read the article

• NFS host is not exporting the "share"

  - by user1345260

  I have a NFS Server: usanfsd01 And a remote machine: usafssd01 I tried mounting a directory from usafssd01 onto usanfsd01 by adding the following line to /etc/fstab as root usanfsdo1:/home/dblogs /home/data/dblogs nfs rw 0 0 And when I run the following command to see if NFS is exporting the share, it's not shown showmount -e usanfsdo1 Can someone please help? Also, a point of interest would be there is another mount that works on the same servers and thats defined as below in the /etc/fstab usanfsdo1:/home/files /home/data/files nfs rw 0 0 /etc/exports /nfs/home/dblogs 'IPADDRESS'(rw,no_root_squash)

  Read the article

• With dnsmasq as the DNS server, 'dig' and 'ping' succeed while 'nslookup' fails

  - by einpoklum

  I installed dnsmasq on a machine of mine (It's a Kubuntu 12.04 LTS), backed only by /etc/hosts (no connection to the Internet until later). Now, if I dig mymachine, I get 192.168.0.1, but if I try to nslookup mymachine, I get: >> connection timed out; no servers could be reached Tried also nslookup mymachine.mynicedomain.org - didn't work either. pinging (Edit:) succeeds. This happens both on the server machine itself and on other machines on the network. How can I the DNS lookups to work? What problem is preventing nslookup from succeeding? Additional Information In the server's /etc/hosts: 192.168.0.1 mymachine In the server's nsswitch.conf: hosts: files mdns4_mininal [NOTFOUND=return] dns mdns4 (admittedly, this is a bit weird; but I also tried: hosts: files dns instead, with the same effect) In resolv.conf (which is generated by dnsmasq): nameserver 127.0.0.1 search mynicedomain.org In the server's /etc/hosts.allow: domain: ALL In the other machines' /etc/resolv.conf (this is set by the DHCP client): nameserver 192.168.0.1 search mynicedomain.org Relevant netstat output on the server: Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN tcp 0 0 192.168.0.1:53 0.0.0.0:* LISTEN Finally, here's the ipconfig output from one of the client machines on the network (running Windows 7): Connection-specific DNS Suffix . : mynicedomain.org Description . . . . . . . . . . . : Intel(R) 82579LM Gigabit Network Connection Physical Address. . . . . . . . . : 12-34-56-78-9A-BC DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.0.50(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Sunday, October 20th 2013 16:20:25 Lease Expires . . . . . . . . . . : Sunday, October 20th 2013 18:20:24 Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 NetBIOS over Tcpip. . . . . . . . : Enabled Notes: May be related to this question.

  Read the article

• RJ45 female to male fault

  - by GeoPhoenix

  i have the following - common - problem, on one end of the cable, there are RJ45 males T586 A which are connected to a 8-port switcher, on the other end, there supposed to be RJ45 females _T586 A which in turn will allow another RJ45 male to be connected. the commonly used color scheme was followed on males (having the head down) blue white blue orange white green green white orange brown white brown the problem i believe is located on female end of cable, which i try multiple time to follow the numbers designated by the module, which is the list above in reverse, and as listed resulting in no signal transmission. tried the T586B (both ends) for device to device once, but no results. Which is the proper way of handling this wiring? There were also additional RJ45 females with the numbers 6-5-4-3, but 1 to 8 isn't supposed to be used for this?

  Read the article

• Changing LDAP schema casts Confluence AD integration unoperable

  - by Maxim V. Pavlov

  I have had our instance of Atlassian Confluence configured to be integrated with our Active Directory. In AD, all the users were being created under default Users folder in Active Directory Users and Computers. We have decided to introduce cleaner separation and have created an Organizational Units structure in AD. Under root we have created Managed OU, and under it - Users OU and all user accounts were moved under Users OU. Now I though that to let the Confluence AD integration engine "know" where to look for user accounts now, I only need to adjust the BaseDN and prepand it with ou=Managed so it is aware that it is looking for cn=Users but under ou=Managed. That didn't work. How should I adjust LDAP schema root in a client application for it to be able to look for users in OU that then in a default folder.

  Read the article

• System Center 2012 Service Manager change request status stuck at new

  - by Chuck Herrington

  The guy that built and setup this system left rather abruptly and I've taken over. My current issues are I have several change requests that are stuck at New. They do not move to Pending or In Progress. The system is not sending emails when incidents are getting assigned to people. This used to work on this system. I have done a lot of searching and the usual solution to this of stopping and restarting the system center services does not help. Can anyone give me any ideas of where else to look? Update: From all the searching I have done it seemed like I was at the point of re-installing. My initial installation of SCSM 2012 was on a machine that was upgraded from SCSM 2010 and also hosted SCCM 2007 and WSUS. We decided to give it a fresh start on a new server by installing a second instance of the SCSM server on a brand new 2008 R2 server then promoting the new server to the workflow master using the procedures outlined in this article - Dealing with Multiple management Servers. I've gotten to the point where we have both the old and the new server up and the new server has been promoted. I had hopped to get spammed by emails all the sudden due to the workflow taking off, but no such luck. Once all the clients are reconfigured to point to the new server we still plan to decommission the old server but at this point it seems to be that the problem is in the database. Short of any other input from the community, my next plan is to install a 180 day trial on a test server, complete with a separate database so that I can do a side by side comparison between a completely fresh install and what I have now and see if I can find any differences. While that install is running I also plan on investigating the event logs to see if there is anything in there that can shed some light on what is happening on the new server. Update 2: So I've now got a test SCSM server up with a completely fresh install including Database and it seems to be able to transition Change Requests from New to In Progress. I'm attempting to find differences between the two. Stay Tuned! Update 3: In looking through the event log on the new SCSM machine i discovered: Log Name: Operations Manager Source: OpsMgr Root Connector Date: 10/9/2013 3:48:18 PM Event ID: 28000 Task Category: None Level: Warning Keywords: Classic User: N/A Computer: scsm02 Description: The Root connector received an exception from the SDK Service while submitting task status: Cannot set availability on a health service that doesn't exist. This lead me to Event ID 2800 logged after installing secondary server for System Center 2012 Service Manager SP1. I contacted MS to obtain the hotfix, BIG warning here, turns out the hotfix is not so "hot". In order to apply this hotfix, you have to uninstall then reinstall using the files they supply. :( This is where I am at now ... Update 4: Not much luck after the re-install. The errors in the event log have gone away on the new server but the workflows still aren't running and neither the event log nor the workflow status screen seem to indicate why. I've done a comparison of the Activity and the Change Request Event Workflows and I've removed everything from the production system that is not in my fresh test system (which is everything), shut down the services, cleared out the cache folders and restarted the services and still no joy. At the moment the only thing I can think to do is either a)nuke the entire system including the database and start over, losing all of our data in the process or b)contact MS (which is probably going to cost us a butt load of money and time in the end to only advise us to do the same thing. Maybe more idea's will come after coffee ... No answers came after coffee. Attempting to contact MS. Managed to get to their first line of defense, gave them our SA number and someone is supposed to call me back. I am trying to log into my incident on their site to update my ticket with the link to this thread but when i click on the link in the email they sent me it goes to a "Sorry, the page you requested is not available" page ... Linux is looking better and better all the time.

  Read the article

• Sun Grid Engine : jobs are not well balanced

  - by GlinesMome

  I use Open Grid Scheduler (a fork/copy of Sun Grid Engine). I have tried this configuration from master: # qconf -mattr exechost complex_values slots=8 slave2 # qconf -mq all.q | grep slots slots 100,[slave1=1],[slave2=8] slave1 is down, then I run 10 qsub with a sleep example (so no CPU consumption) but only 4 jobs are run at the same time on slave2 instead of I have put 8 slots. What does I missed ? PS: my goal is to provide infinite slots to force SGE to schedule only via consummable ressources.

  Read the article

• Differential backup missing moved folders (flawed archive attribute logic)

  - by Max

  Recently I've discovered that my backup system it flawed: there are situation where various files/folders are missed. I do my backup from local disk to a network NAS. I use Cobian backup, and I have setup the backup software to create one full backup every week, and one differential backup every day. Now, the backup software (to my knowledge any backup software work this way) decide the files that go in the differential backup by looking at the file archive attribute. If the attribute is set, then the file go in to the backup. Now, when you move a file to a new location, on Windows systems, the archive attribute get set and the file is included in the backup, and that's fine... but when you move an entire folder, no archive attribute is set, nor on the folder, nor in any files inside the folder, so the moved folder isn't included in the differential backup! So, if you have a full backup plus a differential backup, and you moved folders around... then it's impossible to reconstruct the original files/folders structure starting from the full+differential backup, because the backup software didn't include the moved folders in the differential backup. So my differential backup are useless... Why does windows set the archive attribute when moving a file, but not when moving a folder? How can I deal with this issue? Is there a way to create a differential backup that works as it's supposed to do? Doing full backup every day is not practical, because the changed data is about 0.1% at day (by using a differential backup I can keep 4 weeks of files history without using too much disk space.)

  Read the article

• Can't use HTTPS with ServerXMLHTTP object

  - by Imraan

  I am supporting a Classic ASP application that connects to a payment gateway via HTTPS. Up until recently there have been no issues. A few days ago this broke without the code, IIS config or anything local changing. Its broken on at least 3 separate servers. The last run of Windows Updates was in late November, but bringing the servers' updates up date has not resolved the problem. A code snippet is below. Dim oHttp Dim strResult Set oHttp = CreateObject("MSXML2.ServerXMLHTTP") oHttp.setOption 2, 13056 oHttp.open "POST", SOAP_ENDPOINT, false oHttp.setRequestHeader "Content-Type", "application/soap+xml; charset=utf-8" oHttp.setRequestHeader "SOAPAction", SOAP_NS + "/" & SOAP_FUNCTION oHttp.send SOAP_REQUEST Below is a dump of the error object :- Number: -2147012852 Description: A certificate is required to complete client authentication Message: A certificate is required to complete client authentication I initially posted the question on Stackoverflow (http://stackoverflow.com/questions/9212985/cant-use-https-with-serverxmlhttp-object) thinking it was a code issue, but further investigation seems to point to a server issue.

  Read the article

• Rackspace Cloud Sites: Compute Cycles exploding. Very expensive

  - by Jaap

  Since last week my compute cycles (CC) went through the roof (Rackspace Cloud Sites). Normally I stay under the 10,000 cycles per month . Now this month I already have more than 75,000 compute cycles. I don't have more visitors and I did not change anything in the code. I looked in the raw log files, that didn't help either... This explosion of CC already costs me more than 750 USD right now. And still counting. Anyone know what to do? I have contacted Rackspace last week. But still no solution/answer.... Looks like Rackspace is liking the money! Help! Thanks.

  Read the article

• Windows 7 Explorer keeps crashing

  - by Daniel Liang

  I currently have an issue with Windows Explorer. It keeps crashing when I browse through a network drive. This is happening on several computers. I have already obtained a crash dump file but it doesn't state much: Microsoft (R) Windows Debugger Version 6.12.0002.633 X86 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:\LocalDumps\explorer.exe.3964.dmp] User Mini Dump File with Full Memory: Only application data is available Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Version 7601 (Service Pack 1) MP (2 procs) Free x86 compatible Product: WinNt, suite: SingleUserTS Machine Name: Debug session time: Mon Oct 21 11:21:30.000 2013 (UTC - 4:00) System Uptime: 0 days 0:06:20.449 Process Uptime: 0 days 0:05:54.000 ................................................................ ................................................................ .... Loading unloaded module list ............. This dump file has an exception of interest stored in it. The stored exception information can be accessed via .ecxr. (f7c.fe4): Access violation - code c0000005 (first/second chance not available) eax=00000000 ebx=07a3f080 ecx=00000400 edx=00000000 esi=00000002 edi=00000000 eip=76e170f4 esp=07a3f030 ebp=07a3f0cc iopl=0 nv up ei pl zr na pe nc cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246 ntdll!KiFastSystemCallRet: 76e170f4 c3 ret I've already tried removing certain context menu items. I disabled all unnecessary start-up items. Ran memtest86 and it looks fine on that end. It also happens when I browse through my local disk. Can anyone take a look into this? Thanks!

  Read the article

• Two distinct mount points with one device

  - by user1761555

  After being disappointed with Ubuntu's release update feature, I finally decided to have separate mount points for / and /home. Towards this, I reformatted my HDD giving most of my drive to sda1(meant to be /home) and allocated about 40GB to rootfs (/). Unfortunately, I would also like to have a /projects which is to be located on sda1. Currently, sda1 is being mounted as /dev/sda1 on /home type ext4 (rw) I've tried looking online for a solution to this problem..however, I'm not sure as to what to look for! Is it possible to mount the 'home' directory of sda1 as /home and 'projects' directory of sda1 as /projects?

  Read the article

• Lubuntu LiveCD disabling auto-mount.

  - by PxE Booter

  In cooperation with my IT teacher we want to boot all PC's in IT class with Lubuntu. I've successfully set up PXE server, but there is one thing that worries us. Harddrives shouldn't be accessible from booted Lubuntu(normal user only). Would adding to fstab something like: /dev/sda1 /Idk/What auto noauto work? I'd like to add that I can uncompress squashfs livecd filesystem. If no, what other solution is there, to block auto-mounting /dev/sda drive?

  Read the article

• Different behaviour when running exe from command prompt than in windows

  - by valoukh

  Forgive me if I'm not using the correct terminology here but I'll try to explain the issue I'm having as best I can! We use a program that allows you to view video footage from several cameras, and it works in such a way that when it is opened it then automatically loads several video files within its interface. These video files are stored in a subfolder, e.g. "videos\video1.asf", etc. I didn't create the program so I can't say what method it uses to open the files. The files are stored on a network server and are being accessed via a share/UNC path. When the file is run from windows explorer (by navigating to the network share and double-clicking the exe), it works perfectly. When the file is run via the (elevated) command prompt (e.g. by typing the \server\path\to\file.exe) it opens, but the corresponding video files do not load. I am trying to create a script that launches the program via the command prompt, so the first step is finding out why the two actions above have different consequences. Any advice on how running executables from the command prompt could produce a different result would be greatly appreciated. Thanks

  Read the article

• How do I bridge connections in windows 7?

  - by Wolfgang Haak

  At work, our ISP has gone down, 3 days running. A company next door has kindly provided us with access to their wireless network, and I'd like to get our internal mail server (win 7) to become online via that wireless connection, while being accessible from within the LAN, but I'm struggling with the windows configuration. Our company's LAN subnet (wired interface) sits on 192.168.0. Neighbour's wireless subnet 192.168.1. I've tried bridging the connections but that disconnects the mail server from the Internet connection and the LAN. what do I have to do achieve this networking configuration? Kind regards, Wolfgang

  Read the article

• How can I report a website that uses the webmail APIs to send spam?

  - by Igoru

  I've signed up for a cool job website that, unfortunately, asks you if you want to "invite your friends", and if you say so, you can give them access to your Gmail contacts to send the invite. However, contrary to what everyone would be expecting, they don't give you a list of who you want to invite; instead, they simply directly send spam to your entire contact list, like old-fashioned Outlook viruses. When you complain about this with them, they simply say "we will check the application and see if there is anything that might be confusing for the users". For me and some other friends (that felt for the same prank), this is a clear break on web best practices and a big disrespect on the users' trust. Thus, I would like to know what can we do to stop the website of using Gmail/Yahoo/Outlook APIs to send spam this way. P.S.: I wonder what would happen if I've given this website the access to post in my Facebook timeline as well. I've got a couple of calls from relatives asking about the email and I wonder how many unrelated people got this spam, like HR addresses from my past and whatnot.

  Read the article

• YouTube style linking inside HTML5 Video player

  - by Barney

  After a video has played on YouTube, often there will be a follow up link after the video has finished playing in the form of related videos. I'm looking to implement similar into my HTML5 Video. It would look something like this: At the moment, it seems there is nothing in the W3C spec for this (Links inside HTML5 video). Could anyone advise on a method of achieving? I have 50-100 videos on my site on which I would like to implement. Currently I'm thinking a Javascript callback which initiates the Call to action buttons, though I have a feeling this could get complicated...

  Read the article

• Webserver python update script

  - by ThePyCoder

  So i have made this website on which you can trade stocks based on real stock quotes with virtual money. The stock quotes are in a MySQL database and are updated using a python script which runs every minute or so. Now, this works fine on my local machine with xampp but how about moving the project to a commercial web server? Basically I want my page hosted by a professional company but do those kind of servers support python scripts running in the background? Because a dedicated server would be to expensive and the script does some other sql tasks too so it can't be replaced by PHP or so... So, are there any good web hosting services out there who give me the possibility of running a script in the background and hosting a website in the foreground? For what server specifications do i have to look for? Thnx in advance! PS: I've done some research, and I found a python supporting web host WITH ssh support. Is that what I need? Or is the ssh not allowed to start processes?

  Read the article

• What is the Everyone built-in windows security group called in Portuguese?

  - by JohnLBevan

  I'm attempting to setup share permissions on a Brazilian server and wish to give Everyone read only access. However, the server's language is Brazilian (Portuguese), and it looks like the security groups' names have been translated. Does anyone know what this group is called in Portuguese? Is there an easy way to access this group which is not language sensitive (e.g. some constant value, such as the SID (S-1-1-0) which can always be used, regardless of locale settings)? http://support.microsoft.com/kb/243330. NB: I tried using this SID, but on its own it did not work - though perhaps I need to format it in some way?

  Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >