Monthly Archives

Articles indexed in June 2013

Page 80/126 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

• I am unable to get the subdomain from the URL in NGINX

  - by Jean-Nicolas Boulay Desjardins

  I am unable to get the subdomain from the URL in NGINX. Here is my config: server { listen 80; server_name ~^(?<appname>)\.example\.com$; rewrite ^ https://$appname.example.com$request_uri? permanent; } When I do: http://bob.example.com/ I am sent to: https://.example.com/ I don't know what I am doing wrong. I am using NGiNX 1.2.7. I have another config for the: http://example.com/ So I have one server block for the domain without the subdomain and the second with the subdomain... This is about the subdomain.

  Read the article

• Using bind (named) as a public proxy server

  - by TrentDavis

  We have a Python DNS server that does a bunch of stuff to figure out values it should return for various DNS records. This works nicely, however as it is Python, the performance under high load won't be great. What I would like to do is have a "proxy" bind server sit in front of it to return results to the public internet. This will cache the results (typically 15 minutes, some records are a few seconds), so the load on the Python server will be greatly reduced as it will only see one look up per domain (only about 100 domains) every 15 minutes. The data in these domains changes a lot, so using a master won't work as it will constantly be changing. I have something setup that looked like it would work great (using a forwarder for the zone), and tested it with dig etc, all going great. However when we went to go live with it, things weren't working, and we figured out that named is not setting the "Authoritative" bit (fair enough, it is a forwarder). So my question is, can we tell bind to set the Authoritative bit for forwarded domains? I have looked at all the doco I can find, and can't find anything about doing things this way. Most of the doco about using it as a proxy if for a LAN to the internet. Ideally I would like to use bind as it is there and installed (CentOS 5 servers). But at a pinch we could look at a different name server to do the work if it just can't be done with bind. Thanks.

  Read the article

• mysql master-master setup as a way to simply master-slave promotion

  - by Chris Go

  I'm trying to see if the following plan is viable. Goal here is to be able to do HA (uptime) and not necessarily for load -- writes are fine on one MySQL 5.5 server (with innodb) but not really possible when the database is down. Currently, I have a master-slave replication setup which works fine except it doesn't have automatic promotion (obviously). what I am planning on doing is setup master-master replication to possibly do this "automatic promotion" using Amazon Route 53 DNS Failover (Health checks). What I am trying to avoid is to NOT have to do the auto-increment trick because the "business folks" got used to the auto-incrementing PK as consecutive numbers (yeah, I know this is bad but data is from 2004). So, setup the master-master replication WITHOUT the auto-increment collision prevention bit. The primary master is db1.domain.com and secondary master is db2.domain.com In Amazon Route 53, setup DNS Failover record for db.domain.com - primary failover is db1.domain.com - with a TCP healthcheck on IP address port 3306 - secondary failover is db2.domain.com - with a TCP healthcheck on IP address port 3306 Most of the time (99%), unless tcp://db1.domain.com:3306 is dead, db1.domain.com will be served up on DNS hits to db.domain.com. In fact, hopefully this is 100%. The possible downsides of this is the loss of a primary key (collision) and I think I am OK with losing one order. We are a low data volume B2B business and can just call our client up if this occurs (like an order disappearing). Does this sound like a good plan? Then I will also run another slave replication on db1.domain.com as "master" to a slave-db1.domain.com -- not sure why, maybe for heavy SELECTs?

  Read the article

• Spanning-tree setup with incompatible switches

  - by wfaulk

  I have a set of eight HP ProCurve 2910al-48G Ethernet switches at my datacenter that are set up in a star topology with no physical loops. I want to partially mesh the switches for redundancy and manage the loops with a spanning-tree protocol. However, our connection to the datacenter is provided by two uplinks, each to a Cisco 3750. The datacenter's switches are handling the redundant connection using PVST spanning-tree, which is a Cisco-proprietary spanning-tree implementation that my HP switches do not support. It appears that my switches are not participating in the datacenter's spanning-tree domain, but are blindly passing the BPDUs between the two switchports on my side, which enables the datacenter's switches to recognize the loop and put one of the uplinks into the Blocking state. This is somewhat supposition, but I can confirm that, while my switches say that both of the uplink ports are forwarding, only one is passing any real quantity of data. (I am assuming that I cannot get the datacenter to move away from PVST. I don't know that I'd want them to make that significant of a change anyway.) The datacenter has also sent me this output from their switches (which I have expurgated of any identifiable info): 3750G-1#sh spanning-tree vlan nnn VLAN0nnn Spanning tree enabled protocol ieee Root ID Priority 10 Address 00d0.0114.xxxx Cost 4 Port 5 (GigabitEthernet1/0/5) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32mmm (priority 32768 sys-id-ext nnn) Address 0018.73d3.yyyy Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 300 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Gi1/0/5 Root FWD 4 128.5 P2p Gi1/0/6 Altn BLK 4 128.6 P2p Gi1/0/8 Altn BLK 4 128.8 P2p and: 3750G-2#sh spanning-tree vlan nnn VLAN0nnn Spanning tree enabled protocol ieee Root ID Priority 10 Address 00d0.0114.xxxx Cost 4 Port 6 (GigabitEthernet1/0/6) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32mmm (priority 32768 sys-id-ext nnn) Address 000f.f71e.zzzz Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 300 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Gi1/0/1 Desg FWD 4 128.1 P2p Gi1/0/5 Altn BLK 4 128.5 P2p Gi1/0/6 Root FWD 4 128.6 P2p Gi1/0/8 Desg FWD 4 128.8 P2p The uplinks to my switches are on Gi1/0/8 on both of their switches. The uplink ports are configured with a single tagged VLAN. I am also using a number of other tagged VLANs in my switch infrastructure. And, to be clear, I am passing the tagged VLAN I'm receiving from the datacenter to other ports on other switches in my infrastructure. My question is: how do I configure my switches so that I can use a spanning tree protocol inside my switch infrastructure without breaking the datacenter's spanning tree that I cannot participate in?

  Read the article

• backup and restoration of a freeipa infrastructure

  - by Sirex

  I'm finding the documentation on ipa server backup and restoration sadly lacking, and being so centrally critical it's not something i'm really happy about shooting in the dark with - could some kind soul more knowledable in the matter please attempt to provide an idiot-proof guide to backing up and restoring of IPA server(s) ? Particularly the main server (the cert signing one). ...We're looking towards rolling out ipa in a two server setup (1 master, 1 replica). I'm using dns srv records to handle failover, hence a loss of the replica isn't a big deal as i could make a new one and force a resync to happen - it's losing the master that bothered me. The thing that i'm really struggling with is locating a step-by-step procedure for backing up and restoring the master server. I'm aware that whole-VM snapshot is the recommended way of doing IPA server backup, but that isn't an option at this time for us. I'm also aware that freeipa 3.2.0 includes some sort of backup command build in, but that isn't in the ipa version of centos, and i don't expect it will be for some time yet. I've been trying many different methods, but none of them seem to restore cleanly, amongst others, i've tried; a command similar to db2ldif.pl -D "cn=directory manager" -w - -n userroot -a /root/userroot.ldif the script from here to produce three ldif files -- one for the domain ({domain}-userroot), and two for the ipa server (ipa-ipaca and ipa-userroot): Most of the restores i've tried have been similar to the form of: ldif2db.pl -D "cn=directory manager" -w - -n userroot -i userroot.ldif which seems to work and reports no errors, but totally borks the ipa install on the machine and i can no longer login with either the admin password on the backed up server, or the one i set it to on installation before attempting the ldif2db command (i'm installing ipa-server and running ipa-server-install, then attempting the restore). I'm not overly bothered about losing the CA, having to rejoin the domain, losing replication etc etc (although it'd be awesome if that could be avoided) but in the instance of the main server dropping i'd really like to avoid having to re-enter all the user/group information. I guess in the instance of losing the main server i could promote the other one and replicate in the other direction, but i've not tried that, either. Has anyone done that ? tl;dr: Can someone provide an idiots guide to backing up and restoring an IPA server (preferably on CentOS 6) in a clear enough way that'd make me feel confident it'll actually work when the dreaded time comes ? Crayons are optional, but appreciated ;-) I can't be the only person struggling with this, seeing how widely used IPA is, surely ?

  Read the article

• SSH tunneling with Synology

  - by dvkch

  I try to tunnel SMB and AFP services through SSH to acces my NAS shares on my machine. I already do it successfully with my ReadyNAS using the following command line (ran as my user on my mac) : ssh -Nf -p 22 -c 3des-cbc USER@SERVER -L 8888/127.0.0.1/548 -L 9999/127.0.0.1/139 but I cannot reproduce the same with the Synology NAS. Connecting using this command gives me the following error : channel 4: open failed: administratively prohibited: open failed I also tried with a windows client (used bitvise tunneler): it works with the ReadyNAS but not the Synology and get the following error msg : server denied request for client-side server-2-client forwarding on 127.0.0.1:139 I modified /etc/ssh/sshd_config : MaxSessions 10 PasswordAuthentication yes PermitEmptyPasswords no AllowTcpForwarding yes GatewayPorts yes PermitTunnel yes Is there any way to make it work ? I must add that I can successfully connect via SSH to the NAS so I donnot think this is a firewall issue between the Synology and my computer. Thanks for you answers

  Read the article

• OpenBSD pf 'match in all scrub (no-df)' causes HTTPS to be unreachable on mobile network

  - by Frank ter V.

  First of all: excuse me for my poor usage of the English language. For several years I'm experiencing problems with the 'match in all scrub (no-df)' rule in pf. I can't find out what's happening here. I'll try to be clear and simple. The pf.conf has been extremely shortened for this forum posting. Here is my pf.conf: set skip on lo0 match in all scrub (no-df) block all block in quick from urpf-failed pass in on em0 proto tcp from any to 213.125.xxx.xxx port 80 synproxy state pass in on em0 proto tcp from any to 213.125.xxx.xxx port 443 synproxy state pass out on em0 from 213.125.xxx.xxx to any modulate state HTTP and HTTPS are working fine. Until the moment a customer in France (Wanadoo DSL) couldn't view HTTPS pages! I blamed his provider and did no investigation on that problem. But then... I bought an Android Samsung Galaxy SII (Vodafone) to monitor my servers. Hours after I walked out of the telephone store: no HTTPS-connections on my server! I thought my servers were down, drove back to the office very fast. But they were up. I discovered that disabling the rule match in all scrub (no-df) solves the problem. Android phone (Vodafone NL) and Wanadoo DSL FR are now OK on HTTPS. But now I don't have any scrubbing anymore. This is not what I want. Does anyone here understand what is going on? I don't. Enabling scrubbing causes HTTPS webpages not to be loaded on SOME ISP's, but not all. In systat, I strangely DO see a state created and packets received from those ISP's... Still confused. I'm using OpenBSD 5.1/amd64 and OpenBSD 5.0/i386. I have two ISP's at my office (one DSL and one cable). Affects both. This can be reproduced quite easily. I hope someone has experience with this problem. Greetings, Frank

  Read the article

• Sizing a Virtual Server

  - by vdubs

  I would like to replace four aging physical servers with one virtual server. What is the best way to insure the VM server is sized correctly? The requirements of the apps that will be running on the four servers are APPLICATION SERVERS - QTY 3 - These will run the application layer for the web server, Business Objects Business Intelligence app, and various other small client server apps. The three most heavy hitting apps each have the following server requirements. So, if I bought three physical servers, this would be the requirements for each of them Processor - Dual 2.83 GHZ (or faster) Ram - 4 GB Raid 5 - 50-100GB usable space NIC - 1 GB Web Server - this will run one asp.net e-business app that will talk to our dedicated SQL server and the three app servers above. The E-Business software has these requirements for the web server Processor - Quad 2.83 GHZ (or faster) Ram - 8 GB Raid 5 - 50-100GB usable space NIC - 1 GB What is the best tool to determine what I need from a hardware standpoing in a virtual server? I am planning on using VMWare.

  Read the article

• How to copy directories using debugfs?

  - by tjbp

  The debugfs manpage gives the impression that the command 'rdump . .' will recursively copy all files found on the specified filesystem from the debugfs cwd to the native filesystem's cwd. Instead I seem to receive a syntax error, and no copy is initiated? These are the commands I run: cd /path/to/transfer/destination debugfs /dev/sda1 -R rdump . . My task is to copy the entire contents of a clean yet unmountable USB storage device to its host machine's HD. The host machine does not support the inode size used by the USB device's filesystem (256) and its software is not upgradeable, so my intention was to use debugfs to transfer the files. If anyone has any other suggestions for this task I'd be grateful.

  Read the article

• Running 'sudo' over SSH

  - by Wesho

  I'm writing a script which is to log onto a bunch of remote machines and run a command on them. I've set up keys so the user running the script does not have to type the password of each machine, but only type in the passphrase in the beginning of the script. The problem is that the command on the remote machines requires sudo to run. And at the same time the whole point of the script is to rid the user of having to type in passwords multiple times. Is there way to avoid typing in the password for sudo? Changing permissions of the command on the remote machines is not an option.

  Read the article

• Resetting TCP/IP Settings on Windows 8

  - by cpx

  Apparently, there's a command: netsh int ip reset which is known to reset TCP/IP settings for Windows XP/Vista/7 and I'm not sure how it works correctly on Windows 8. When I typed the command under command prompt (Admin) I got two errors as pointed out in the screenshot: Resetting , failed. Access is denied. At the end it said Resetting , OK! So, how do I confirm if it worked or not?

  Read the article

• Configuring port forwarding for SSH - no response outside LAN

  - by WinnieNicklaus

  I recently moved, and at the same time purchased a new router (Linksys E1200). Prior to the move, I had my old router set up to forward a port for SSH to servers on my LAN, and I was using DynDNS to manage the external IP address. Everything worked great. I moved and set up the new router (unfortunately, the old one is busted so I can't try things out with it), updated the DynDNS address, and attempted to restore my port forwarding settings. No joy. SSH connections time out, and pings go unanswered. But here's the weird part (i.e., key to the whole thing?): I can ping and SSH just fine from within this LAN. I'm not talking about the local 192.168.1.* addresses. I can actually SSH from a computer on my LAN to the DynDNS external address. It's only when the client is outside the LAN that connections are dropped. This surely suggests a particular point of failure, but I don't know enough to figure out what it is. I can't figure out why it would make a difference where the connections originate, unless there's a filter for "trusted" IP addresses, which is perhaps just restricted to my own. No settings have been touched on the servers, and I can't find any settings suggesting this on the router admin interface. I disabled the router's SPI firewall and "Filter anonymous traffic" setting to no avail. Has anyone heard of this behavior, and what can I do to get past it?

  Read the article

• Prefix files with the current directory name using Powershell

  - by XST

  I have folders with images (*.png and *.jpg) >C:\Directory\Folder1 01.png 02.png 03.jpg 04.jpg 05.png And I want to rename all the files like this using powershell: >C:\Directory\Folder1 Folder1 - 01.png Folder1 - 02.png Folder1 - 03.jpg Folder1 - 04.jpg Folder1 - 05.png So I came up with this simple line: Get-ChildItem | Where-Object { $_.Extension -eq ".jpg" -or $_.Extension -eq ".png"} | rename-item -newname {$_.Directory.Name +" - " + $_.Name} If I have 35 or less files in the folder, I will have the wanted result, but if there is 36 or more files, I will end up with this: >C:\Directory\Folder1 Folder1Folder1Folder1 - 01.png Folder1Folder1Folder1 - 02.png Folder1Folder1Folder1 - 03.jpg Folder1Folder1Folder1 - 04.jpg Folder1Folder1Folder1 - 05.png The loop stops when the file's name exceeds 248 characters. Any ideas why it's looping?

  Read the article

• Can I fix memory leaks in browsers? (Win7 64bit IE9 Chrome)

  - by Randy

  I have a habit of opening websites in their own window, then getting interested in something else in another window while leaving the first window open with the intention of returning to finishing reading. Sometimes I'll leave browser windows open for quite a while. When I do, the browser locks-up gigs of memory until it uses so much, IE will no longer respond. I've seen one browser window use up over 2 gigs just sitting there doing nothing. Chrome appears to do it too, but it doesn't use nearly as much as IE. Is there a way to stop this? Any ideas what may be causing it? Is it a problem with the OS or the browsers? Any insight is appreciated.

  Read the article

• unzip file on small drive

  - by David Oneill

  I have a zip file that contains many files. Each file in the zip file is about 100MB, and is compressed about 10% (IE it is about 90MB in the zip file). The whole zip file is 20GB, and I'm trying to unzip it onto a drive that has only 30GB free. On Windows 7, how can I unzip a zip file on my laptop's harddrive that doesn't have enough space for both the zipped and unzipped copies of the file? IE can I tell windows to remove stuff from the zip file as it is uncompressed?

  Read the article

• There's a stray current flowing from my monitor through the VGA cable to the PC. Is this safe?

  - by EApubs

  I have two monitors in my machine. One is an old LCS samsung monitor. Recently, I started to hear a small hum in my speakers (subwoofer) and replaced them. The new one also got the issues then I found our that its a grounding issue. I unplugged the PC's power chord. The monitor is still switched on. When I checked, there's current in the earth pin (ground pin). When I unplug the monitor, there's no current and the speaker is normal. Now, I have moved that monitor to my dad's machine and took his monitor. My question is, is it a big issues? The house's earthing system is working and its grounding the current. I won't feel it if I touch the machine like in many other cases. But still, is it good to keep that monitor attached to my machine? Can it harm the computer? What should I do?

  Read the article

• Dual boot - disk partition issues basic vs dynamic disk

  - by dboyd68

  I have a lenovo X1 that I am looking to dual boot windows and ubuntu on. I am having an issue. The disk came with 4 partitions SYSTEM_DRV, Windows C:, Lenovov Recovery, Hibernate Partition I have a SSD (250 gb) I have shrunk Windows C: so that I have 100gb of unallocated space. My plan was to install ubuntu on that. But when I try to create a new partition to install ubuntu on. Windows is saying I have to convert to a dynamic disk. I don't really understand the difference between Dyanimc and Basic disk but a quick search I am assuming I dont want to do this as I boot from this disk? Any suggestions on what I can do to dual boot? Thanks

  Read the article

• Windows XP: GNU find.exe moved my files and now they're lost

  - by user2001487

  I used a series of GNU find.exe commands to move media files to the current folder. Explorer show that the folders and files still exist in their original location but properties show zero size and files. I performed a chkdisk and that didnt help. Any ideas how to recover these files? Here are the commands from my bat file. find.exe . -mindepth 1 -name "*.mkv" -type d -exec mv {} {}.tmp ; find.exe . -mindepth 2 -type f -exec mv {} . ; find.exe . -mindepth 1 -type d -exec rmdir {} ; http://i.stack.imgur.com/Eiq2y.jpg http://i.stack.imgur.com/E1wSN.jpg

  Read the article

• unable to copy file to folder, permission denied without explanation

  - by ValekHalfHeart

  Recently Norton Internet security deleted ml.exe (an assembler I use to program in masm32) off of my computer, thinking that one of the programs I had written with it was a virus (it was most certainly not). Fortunately, I had a copy of ml.exe backed up in an external hard drive, and tried to copy it over to my computer. The old ml.exe was located in C:\masm32\bin, so I tried to copy the new one to that location. After disabling Norton (which had opened the folder and preventing me from accessing it), I am still unable to copy the new file to C:\masm32\bin. When I tried, Windows announced that I would need Administrator permission to copy the file. Since I'm an admin, I figured this wouldn't be a problem although it was unexpected, as I have never had to provide administrator permission to access this folder before. However, instead of prompting me to enter my password, Windows simply refuses to copy the file: I repeat, I was not asked to provide a password. It simply says that I do not have permission. Does anyone know what's happening and how to fix it? Is Norton still causing problems, or it something else?

  Read the article

• How to reinstall Windows Boot Manager on EFI partition

  - by joaocandre

  So I've been trying to install Ubuntu on a second HDD on my desktop, which has W8 installed on a SSD (UEFI-only boot). Thing is, during Ubuntu installation I made the mistake of choosing to install the bootloader (GRUB) to the first disk (the SSD), and after install I could not boot into W8 (the entries in GRUB didn't work). Following these instructions, I managed to be able to get "Windows Boot Manager" back, however I lost GRUB in the process, and got a duplicate "Windows Boot Manager" entry in BIOS, along with the "Ubuntu" entry, which then I used to boot into Ubuntu. Later, I decided to reinstall Ubuntu, and formatted the HDD from within windows, however, the entries in BIOS stayed the same, and, while I had the HDD connected to the motherboard, I could not boot into an Ubuntu Live USB (in order to reinstall Ubuntu). I made another mistake by updating the BIOS, which cleared all of the EFI boot entries in BIOS, and, right now, I get an error when boot from the SSD: grub: device not found (...) So it seems that grub is still installed in the EFI partition of the SSD, and since I don't have the WBM entry in BIOS anymore, I cannot even boot into Windows, and the previous instructions don't work anymore. Is there another way to reset W8 EFI partition to the default?

  Read the article

• Could some one please explain the various proxy configuration scenarios?

  - by RP.

  I am working on a client application in C# which does a various kinds of communication with a server( eg: uploads, downloads etc ). We have a legacy system which does the same functionality and we get in to proxy configuration related issues frequently.It uses the settings from internet explorer network settings. Most of the time these are due to specific proxy configuration( Eg: Proxy auto-config etc ). I am trying to understand the various scenarios used in corporate environments for proxy configurations. Could some one please explain the various proxy configuration scenarios?

  Read the article

• Remove command from auto-completion / history

  - by dushyantp

  In windows command prompt, say we are running a command (batch file) runtest but we typo as runtet Then when we press F8 next time at 'run',it will still pop with 'runtet'. Is there any way to remove this incorrect command from auto completion list without restarting the cmd prompt? Or a better way to achieve this? Without restarting because, there are other commands which are relevant for auto completion and also the environment (though it can be set by batch file).

  Read the article

• RSS "Newspaper" / Google Reader replacement

  - by Sean D

  With the impending demise of Google Reader I've been looking at ways to replace it. I've decided that what might be cool is to get an email every morning, with all the updates from the last twenty-four hours, maybe in the style of a newspaper. That's not a very original idea, since sites like http://fivefilters.org/pdf-newspaper/ and http://feedjournal.com/ already do this, but they both have various drawbacks. In particular both require a single feed, will just take the last n items, and clicking around on their website. The Pro option for feedjournal seems almost like it would do the job, but the project seems to be dead, and there's no way to buy it. Before I hack together something crazy I'd like to know if there's a better solution to my problem. In short: I want to replace Google Reader with a daily pdf email, how should I do this? edit: I didn't award the bounty because nobody solved the problem (not that I'm assuming it has a solution). Answers like "well for the way I do things this wouldn't work" aren't actually helpful, even if they are well-meaning.

  Read the article

• How to remove Media Center from Windows 8

  - by Arabella

  I bought 2 Windows 8 upgrades, 1 for my PC and 1 for my notebook. I added Windows Media Center to my notebook using the free offer in November (side note: the key was emailed to me within 5 minutes, I see many people have been complaining that it takes a few days). Today I decided to add WMC to my PC as well, so I went onto the Microsoft website, same like last time, and I received the email within a few minutes. Once I added WMC, entered the key and the computer rebooted, my activation is now broken: This product key is already being used on another PC. Try a different key or buy a new one. After rereading the product key email, I realised that the WMC key was exactly the same as the one I had received in November for my notebook (I used the same email, i.e. my Microsoft account Outlook email, for both). I didn't think this would be a problem, as on Microsoft's feature pack page it states: ...is limited to five licenses per customer per promotion. So then I decided, I'll just remove WMC from my PC and go back to Windows 8 Pro. So I turned off the WMC feature, PC restarted, activation still broken because my key has been replaced. I then tried to activate it with my original Pro key. The error it gave was that this key cannot be used with this version of Windows, as it is now Windows 8 Pro with Media Center and not Windows 8 Pro anymore. I've searched a bit and it seems the only way to remove it is do a clean install. I tried the Windows 8 Downgrade Helper, which told me I was already running Win 8 Pro when I tried to downgrade, and that I was running Win 8 Pro with Media center when I tried the other option. To sum up: How do I remove Windows Media Center from Windows 8 Pro without having to do a clean install?

  Read the article

• Sending files through ssh

  - by Frion3L

  I need to send files to a server using ssh. I have never used ssh so this is being really frustrating to me. Mention the client (me) is using windows and the server is using Ubuntu. I connected to the server using ssh2 ip, and then loging with an account I have. Now, I would like to send my files to a folder in the server, so, I moved to the folder and I used this command: scp test.txt user_name@host_direction server_folder_destination And it always return that it can't do 'stat' over test.txt, the file doesn't exist, and so. I'm assuming ssh2 can't see the file in my computer root (C:), so I tried to specifie more and added: C:\test.txt, but apear the same error. I don't know what is happening. Any hints please? Thanks

  Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >