Search Results

Search found 472 results on 19 pages for 'carrier'.

Page 1/19 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • 6 Reasons Why You Can’t Move Your Cell Phone To Any Carrier You Want

    - by Chris Hoffman
    You can buy a laptop or Wi-Fi tablet and use it on Wi-Fi anywhere in the world, so why are cell phones and devices with mobile data not portable between different cellular networks in the same country? Unlike with Wi-Fi, there are many different competing cellular network standards — both around the world and within countries. Cellular carriers also like locking you to their specific network and making it difficult to move. That’s what contracts are for. Phone Locking Many phones are sold locked to a specific network. When you buy a phone from a cellular carrier, they often lock that phone to their network so you can’t take it to a competitor’s network. That’s why you’ll often need to unlock a phone before you can move it to a different cellular provider or take it to a different country and use it on a local provider instead of roaming. Cellular carriers will generally unlock your phone for you as long as you’re no longer in a contract with them. However, unlocking a cell phone you’ve paid for without your carrier’s permission is currently a crime in the USA. GSM vs. CDMA Some cellular networks use the GSM (Global System for Mobile Communications) standard, while some use CDMA (Code-division multiple access). Worldwide, most cellular networks use GSM. In the USA, both GSM and CDMA are popular. Verizon, Sprint, and other carriers that use their networks use CDMA. AT&T, T-Mobile, and other carriers that use their networks are use GSM. These are two competing standards and are not interoperable. This means you can’t simply take a phone from Verizon to T-Mobile, or from AT&T to Sprint. These carriers have incompatible phones. CDMA Restrictions CDMA is more restricted than GSM. GSM phones have SIM cards. Simply open the phone, pop out the SIM card, and pop in a new SIM card to switch carriers. (In reality, it’s more complicated thanks to phone locking and other factors here.) CDMA phones don’t have removable modules like this. All CDMA phones ship locked to a specific network and you’d have to get both your old carrier and your new carrier to cooperate to switch phones between them. In reality, many people just consider CDMA phones eternally locked to a specific carrier. Frequencies Different cellular networks throughout the USA and the rest of the world use different frequencies. These radio frequencies have to be supported by your phone’s hardware or your phone simply can’t work on a network using those frequencies. Many GSM phones support three or four bands of frequencies — 900/1800/1900 MHz, 850/1800/1900 MHz, or 850/900/1800/1900 MHz. These are sometimes called “world phones” because they allow easier roaming. This allows the manufacturer to produce a phone that will support all GSM networks in the world and allows their customers to travel with those phones. If your phone doesn’t support the appropriate frequencies, it won’t work on certain networks. LTE Bands When it comes to newer, faster LTE networks, different frequencies are still a concern. LTE frequencies are generally known as “LTE bands.” To use a smartphone on a certain LTE network, that smartphone will have to support that LTE network’s frequency. Different models of phones are often created to work on different LTE networks around the world. However, phones are generally supporting more and more LTE networks and becoming more and more interoperable over time. SIM Card Sizes The SIM cards used in GSM phones come in different sizes. Newer phones use smaller SIM cards to save space and be more compact. This isn’t a big obstacle, as the different sizes of SIM cards — full-size SIM, mini-SIM, micro-SIM, and nano-SIM are actually compatible. The only difference between them is the size of the plastic card surrounding the SIM’s chip. The actual chip is the same size between all the SIM cards. This means you can take an old SIM card and cut the plastic off until it becomes a smaller-size SIM card that fits in a modern phone. Or, you can take a smaller-size SIM card and insert it into a tray so that it becomes a larger-size SIM card that fits in an older phone. Be aware that it’s very possible to damage your SIM card and make it not work properly by cutting it to the wrong dimensions. Your cellular carrier will often be able to cut your SIM card for you or give you a new one if you want to use an old SIM card in a new phone. Hopefully they won’t overcharge you for this service, too. Be sure to check what types of networks, frequencies, and LTE bands your phone supports before trying to move it between networks. You may have to buy a new phone when moving between certain cellular carriers. Image Credit: Morgan on Flickr, 22n on Flickr

    Read the article

  • DIY Camera Carrier Turns any Bag into a Camera Bag

    - by Jason Fitzpatrick
    The biggest problem with camera bags is that they look like camera bags and thus become a perfect target for thieves. This DIY camera carrier lets you slip a lens and camera holder into any bag to help conceal and protect your gear. The project comes to us courtesy of Joy, a designer and crafter, and her adventures in making a DIY camera carrier to help protect her camera while carrying it discretely in her purse. You’ll need some basic sewing skills and access to a sewing machine; to follow along check out the link below and adjust the dimensions of her design to fit your bag. Camera Carrier Insert Tutorial [via Apartment Therapy] HTG Explains: Is ReadyBoost Worth Using? HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks

    Read the article

  • Unable to decide weather to continue or quit and start a new carrier

    - by latif mohammad khan
    I am working in a small company. I have joined here for java developer ,but they told as i am fresher so work as Android developer . Then i asked one of my lecturer about Android developement.then he replied why going for mobile developement which is not standard(as nokia's symbain lost , mobile os changes quickly ) its better to get job as Java Developer. By listening his words i was bit not satisfied with my job and thought of leaving Job and search as java developer. But i dont have much confidence to search a job at that time(because i got job after 1 and half years after i passed out), i have decided to work as android developer(as learning new technology and practice java at home). On the first day they introduced me to team leads and they assigned under him. After few days i came to know that my team lead is having only 1 year experience. He(my team lead) joined here as a fresher and done r&d now is my Team lead. If i ask any doubt to him , he just search in internet and reply's my question (some times he explains wrongly) i correct it by myself by searching in net.In my company they don't use latest technologies,they dont follow any design patterns because they dont know them. They provide me very less pay and more work, i dont bother about pay because i am fresher but i bother about work which is not use(I feel like that because they dont use latest technologies,no design patterns,no proper team lead) What i thought was to learn from the company, Team leads how the project done. But there I feel like, i am wasting my time.If i go for another interview in future they ask latest technologies. Now i dont know what to do weather to quit the job and learn another language which have good demand like sap abap or to continue here. please provide me advice Thanks.

    Read the article

  • MySQL at Mobile World Congress (on Valentine's Day...)

    - by mat.keep(at)oracle.com
    It is that time of year again when the mobile communications industry converges on Barcelona for what many regard as the premier telecommunications show of the year.Starting on February 14th, what better way for a Brit like me to spend Valentines Day with 50,000 mobile industry leaders (my wife doesn't tend to read this blog, so I'm reasonably safe with that statement).As ever, Oracle has an extensive presence at the show, and part of that presence this year includes MySQL.We will be running a live demonstration of the MySQL Cluster database on Booth 7C18 in the App Planet.The demonstration will show how the MySQL Cluster Connector for Java is implemented to provide native connectivity to the carrier grade MySQL Cluster database from Java ME clients via Java SE virtual machines and Java EE servers.  The demonstration will show how end-to-end Java services remain continuously available during both catastrophic failures and scheduled maintenance activities.The MySQL Cluster Connector for Java provides both a native Java API and JPA plug-in that directly maps Java objects to relational tables stored in the MySQL Cluster database, without the overhead and complexity of having to transform objects to JDBC, and then SQL  The result is 10x higher throughput, and a simpler development model for Java engineers.Stop by the stand for a demonstration, and an opportunity to speak with the MySQL telecoms team who will share experiences on how MySQL is being used to bring the innovation of the web to the carrier network.Of course, if you can't make it to Barcelona, you can still learn more about the MySQL Cluster Connector for Java from this whitepaper and are free to download it as part of MySQL Cluster Community Edition  Let us know via the comments if you have Java applications that you think will benefit from the MySQL Cluster Connector for JavaI can't promise that Valentines Day at MWC will be the time you fall in love with MySQL Cluster...but I'm confident you will at least develop a healthy respect for it  

    Read the article

  • Arch Linux: eth0 no carrier - network fails at boot

    - by user905686
    The problem My computer is connected to a network where dhcp is required. So my network configuration in /etc/rc.conf looks like interface=eth0 address= netmask= broadcast= gateway= My deamons are DAEMONS=(!hwclock syslog-ng network netfs crond ntpd) With this configuration, Arch hangs at boot a long time at "Network" (Still it says "[done]", but after boot I have no connection). I found out two workaround: Workaround 1 remove network from deamons run mii-tool --reset eth0 and dhcpcd eth0 after boot (somehow it does not work when placing these commands in /etc/rc.local. Then dhcp work very quickly (because of the reset!). Before executing the first command, ip link show eth0 has "NO CARRIER" in output. Afterwards, it doesn´t. (Also, mii-tool first shows "no link", afterwards eth0: 10 Mbit, half duplex, link ok. Workaround 2 Change network configuration to interface=eth0 address=x.y.z.21 netmask=255.255.255.0 broadcast=xxx.y.z.255 gateway=x.y.z.254 whereas x, y, z build the specific adresses of the network (Though dhcp is used, I get a static ip). Add the commands mii-tool --reset eth0 and dhcpcd eth0 to /etc/rc.local Now network starts quickly at boot (though I don´t know if successfully), the commands in /etc/rc.local are executed and the connection is fine after login. What to do? So the problem seems to be that dhcpcd stucks at "wating for carrier" or sth. I do not like the workaround, because some deamons need network (though they seem to start). What can I do to have eth0 ready for dhcp at boot? Or is there another problem?

    Read the article

  • What are the reasons to marry a carrier?

    - by Bohdan Trotsenko
    Probably because I live in Europe, I cannot understand 1 phenomenon in US cellphones business. iPhone is bound to AT&T, HTC EVO 4G is for Sprint, Droid goes with Verison etc... Businesses do that. I guess they do that for a reason. If I were a phone manufacturer, why should I make a phone available for a single carrier only?

    Read the article

  • HDD Carrier, like a soda carrier available at McDonalds?

    - by Jason Taylor
    We use external USB drives for backups, and they have to be stored offsite at the end of the week. Right now we have your standard external USB drive inside an enclosure. We were thinking about moving to a USB dock, and dock a bare HDD for backups, rather than having various sized and types of enclosures. If we were to do this, the drives need protection while being transported to/from the safety deposit box. Is there any kind of hard drive carrier that would let us slide two drives into it, and it would provide protection while the drives are carried around by non-technical people? I'm afraid such a product doesn't exist, but perhaps someone knows of something?

    Read the article

  • Encryption over gigabit carrier ethernet

    - by Roy
    I would like to encrypt traffic between two data centres. Communication between the sites is provided as a standard provider bridge (s-vlan/802.1ad), so that our local vlan tags (c-vlan/802.1q) are preserved on the trunk. The communication traverse several layer 2 hops in the provider network. Border switches on both sides are Catalyst 3750-X with the MACSec service module, but I assume MACSec is out of the question, as I don't see any way to ensure L2 equality between the switches over a trunk, although it may be possible over a provider bridge. MPLS (using EoMPLS) would certainly allow this option, but is not available in this case. Either way, equipment can always be replaced to accommodate technology and topology choices. How do I go about finding viable technology options that can provide layer 2 point-to-point encryption over ethernet carrier networks?

    Read the article

  • API to determine cell carrier?

    - by Chris Lively
    Is there a free API or some other way to determine what carrier a cell phone number is registered with? I'd like my application to broadcast text messages without them picking their carrier from a list. UPDATE: Interestingly, a coworker found the answer: http://developer.whitepages.com/ UPDATE2: Well the whitepages license agreement is so restrictive that you can't build an app for it. Any other ideas?

    Read the article

  • USR9108 not connecting to DSL service/not detecting carrier

    - by Salman A
    As suggested in this answer I've hooked up the phone cable to the USR9108 router. I've entered the information provided by the ISP (VPI/VCI, Username, Password etc) in the ADSL configuration section but the router does not connect to DSL service. The ASDL diagnostics fail in the first step stating that no signal was found. The same phone line when connected to ZyXEL P-660R-T1 v2 modem works successfully. Can anyone tell me how to trouble shoot this issue? Does it have something to do with 2 wire and 4 wire telephone line? PS: whats the difference between ASDL and DSL?

    Read the article

  • Carrier Wave not completing upload to Rackspace Cloud Files

    - by Zack Fernandes
    Hello, I have been attempting to get file uploads to Rackspace Cloud Files online all night, and finally tried the Carrierwave Plugin. Although the plugin worked right away, when I tried viewing the file uploaded (an image) it was broken. Upon further testing, I found out that files would upload to Cloud Files, however were just a fraction of their original size. I can't seem to figure out what's worng, and any help would be greatly appreciated. My code is as follows. models\attachment.rb class Attachment < ActiveRecord::Base attr_accessible :title, :user_id, :file, :remote_file_url, :file_cache, :remove_file belongs_to :user mount_uploader :file, AttachmentUploader end uploaders\attachment_uploader.rb class AttachmentUploader < CarrierWave::Uploader::Base storage :cloud_files def store_dir "#{model.user_id}-#{model.id}" end end

    Read the article

  • SMS + Web app: Providers of SMS "Long codes" for use by U.S. carrier subscribers within U.S.?

    - by fourh
    Q.: How to get a cellular phone SMS "Long code" for use by U.S. carrier subscribers within U.S.? Background: I'm building a web app that receives queries from/sends answers to cell phones. The app design (and business model) expects to communicate with cell devices via SMS, addressing the web app via an SMS "Long code" (VMN or MSISDN). The mobile phone subscribers will be sending/receiving within the U.S. and using U.S. carriers. Long codes are not available within the U.S. cellular services.

    Read the article

  • Intel 82576 Network card

    - by No1_Melman
    I have an Intel dual port pcie NIC card with two 82576 interfaces according to ubuntu 12.04. I run the command sudo lshw -html > /home/melman/Documents/hardware.html and it shows both of the interfaces but they're grayed out?! How can enable them? ifconfig output: bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:192.168.100.2 Bcast:192.168.100.255 Mask:255.255.255.0 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr e0:69:95:d1:db:ff inet addr:192.168.10.63 Bcast:192.168.10.255 Mask:255.255.255.0 inet6 addr: fe80::e269:95ff:fed1:dbff/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2903 errors:0 dropped:0 overruns:0 frame:0 TX packets:2627 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1524738 (1.5 MB) TX bytes:430196 (430.1 KB) Interrupt:20 Memory:f7f00000-f7f20000 eth3 Link encap:Ethernet HWaddr 00:50:b6:50:a7:f9 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:1b:21:6e:99:77 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:f7c00000-f7c20000 eth5 Link encap:Ethernet HWaddr 00:1b:21:6e:99:76 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:f7c20000-f7c40000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:246 errors:0 dropped:0 overruns:0 frame:0 TX packets:246 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:17584 (17.5 KB) TX bytes:17584 (17.5 KB)

    Read the article

  • xen debian: domU can't get out side

    - by iftol
    hi every body. i'm a trainee as a sysAdmin, it is my first expérience with virtualization. i have a server setup debian xen 3 with 2 physical interfaces. eth 0 for local network 10.0.0.1 and eth1 for internet (194.X.X.4). i created 3 VMs (web server, mail server and dabase server) with local ip addresses 172.10.0.x/24. the problem i had first is that domU can't ping dom0. i asked the sysAdmin of our ISP and he sais that he fogot to setup the bridginb. so he ceated a bridge with 172.10.0.1/24 after that i was able to ping the real server (194.X.X.4). but i can't go out side from my VMs, how can i fixe this issue? real or physical server ifconfig eth0 Link encap:Ethernet HWaddr 23:26:34:84:ce:xe inet adr:10.1.3.12 Bcast:10.1.3.255 Masque:255.255.255.0 adr inet6: fe80::226:b9ff:fe84:ceb4/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:412006 errors:0 dropped:0 overruns:0 frame:0 TX packets:411296 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 RX bytes:31410957 (29.9 MiB) TX bytes:31178370 (29.7 MiB) Interruption:36 Mémoire:d6000000-d6012100 eth1 Link encap:Ethernet HWaddr 23:26:34:84:ce:xe inet adr:194.x.x.4 Bcast:194.254.167.255 Masque:255.255.255.0 adr inet6: fe80::226:b9ff:fe84:ceb6/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:25872332 errors:0 dropped:0 overruns:0 frame:0 TX packets:414578 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:2642278343 (2.4 GiB) TX bytes:35436775 (33.7 MiB) lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1308073 errors:0 dropped:0 overruns:0 frame:0 TX packets:1308073 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:109871395 (104.7 MiB) TX bytes:109871395 (104.7 MiB) peth1 Link encap:Ethernet HWaddr 23:26:34:84:ce:xe UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:31818694 errors:0 dropped:0 overruns:0 frame:0 TX packets:414818 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 RX bytes:5197318822 (4.8 GiB) TX bytes:37904897 (36.1 MiB) Interruption:48 Mémoire:d8000000-d8012100 vif281.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:207 errors:0 dropped:0 overruns:0 frame:0 TX packets:298 errors:0 dropped:2 overruns:0 carrier:0 collisions:0 lg file transmission:32 RX bytes:24629 (24.0 KiB) TX bytes:28404 (27.7 KiB) vif281.1 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:45 errors:0 dropped:47063 overruns:0 carrier:0 collisions:0 lg file transmission:32 RX bytes:0 (0.0 B) TX bytes:4449 (4.3 KiB) vif282.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:78 errors:0 dropped:0 overruns:0 frame:0 TX packets:13 errors:0 dropped:1 overruns:0 carrier:0 collisions:0 lg file transmission:32 RX bytes:5041 (4.9 KiB) TX bytes:714 (714.0 B) xenbr0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff inet adr:172.10.0.1 Bcast:172.10.0.255 Masque:255.255.255.0 adr inet6: fe80::5c72:c6ff:fe49:7fe/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7180 errors:0 dropped:0 overruns:0 frame:0 TX packets:8615 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:756804 (739.0 KiB) TX bytes:791206 (772.6 KiB) brtcl show bridge name bridge id STP enabled interfaces eth1 8000.0026b984ceb6 no peth1 vif281.1 xenbr0 8000.feffffffffff no vif281.0 vif282.0 network-multi-bridge /etc/xen/scripts/network-virtual start vifnum="0" bridgeip="172.10.0.1/24" brnet="172.10.0.0/24" VM webserver eth0 Link encap:Ethernet HWaddr 00:16:3E:42:33:70 inet addr:172.10.0.2 Bcast:172.10.0.255 Mask:255.255.255.0 inet6 addr: fe80::216:3eff:fe42:3370/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3 errors:0 dropped:0 overruns:0 frame:0 TX packets:27 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:126 (126.0 b) TX bytes:2036 (1.9 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Thank you for your help.

    Read the article

  • KVM/Libvirt bridged/routed networking not working on newer guest kernels

    - by SharkWipf
    I have a dedicated server running Debian 6, with Libvirt (0.9.11.3) and Qemu-KVM (qemu-kvm-1.0+dfsg-11, Debian). I am having a problem getting bridged/routed networking to work in KVM guests with newer kernels (2.6.38). NATted networking works fine though. Older kernels work perfectly fine as well. The host kernel is at version 3.2.0-2-amd64, the problem was also there on an older host kernel. The contents of the host's /etc/network/interfaces (ip removed): # Loopback device: auto lo iface lo inet loopback # bridge auto br0 iface br0 inet static address 176.9.xx.xx broadcast 176.9.xx.xx netmask 255.255.255.224 gateway 176.9.xx.xx pointopoint 176.9.xx.xx bridge_ports eth0 bridge_stp off bridge_maxwait 0 bridge_fd 0 up route add -host 176.9.xx.xx dev br0 # VM IP post-up mii-tool -F 100baseTx-FD br0 # default route to access subnet up route add -net 176.9.xx.xx netmask 255.255.255.224 gw 176.9.xx.xx br0 The output of ifconfig -a on the host: br0 Link encap:Ethernet HWaddr 54:04:a6:8a:66:13 inet addr:176.9.xx.xx Bcast:176.9.xx.xx Mask:255.255.255.224 inet6 addr: fe80::5604:a6ff:fe8a:6613/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:20216729 errors:0 dropped:0 overruns:0 frame:0 TX packets:19962220 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:14144528601 (13.1 GiB) TX bytes:7990702656 (7.4 GiB) eth0 Link encap:Ethernet HWaddr 54:04:a6:8a:66:13 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:26991788 errors:0 dropped:12066 overruns:0 frame:0 TX packets:19737261 errors:270082 dropped:0 overruns:0 carrier:270082 collisions:1686317 txqueuelen:1000 RX bytes:15459970915 (14.3 GiB) TX bytes:6661808415 (6.2 GiB) Interrupt:17 Memory:fe500000-fe520000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:6240133 errors:0 dropped:0 overruns:0 frame:0 TX packets:6240133 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6081956230 (5.6 GiB) TX bytes:6081956230 (5.6 GiB) virbr0 Link encap:Ethernet HWaddr 52:54:00:79:e4:5a inet addr:192.168.100.1 Bcast:192.168.100.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:225016 errors:0 dropped:0 overruns:0 frame:0 TX packets:412958 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:16284276 (15.5 MiB) TX bytes:687827984 (655.9 MiB) virbr0-nic Link encap:Ethernet HWaddr 52:54:00:79:e4:5a BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) vnet0 Link encap:Ethernet HWaddr fe:54:00:93:4e:68 inet6 addr: fe80::fc54:ff:fe93:4e68/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:607670 errors:0 dropped:0 overruns:0 frame:0 TX packets:5932089 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:83574773 (79.7 MiB) TX bytes:1092482370 (1.0 GiB) vnet1 Link encap:Ethernet HWaddr fe:54:00:ed:6a:43 inet6 addr: fe80::fc54:ff:feed:6a43/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:922132 errors:0 dropped:0 overruns:0 frame:0 TX packets:6342375 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:251091242 (239.4 MiB) TX bytes:1629079567 (1.5 GiB) vnet2 Link encap:Ethernet HWaddr fe:54:00:0d:cb:3d inet6 addr: fe80::fc54:ff:fe0d:cb3d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9461 errors:0 dropped:0 overruns:0 frame:0 TX packets:665189 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:4990275 (4.7 MiB) TX bytes:49229647 (46.9 MiB) vnet3 Link encap:Ethernet HWaddr fe:54:cd:83:eb:aa inet6 addr: fe80::fc54:cdff:fe83:ebaa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1649 errors:0 dropped:0 overruns:0 frame:0 TX packets:12177 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:77233 (75.4 KiB) TX bytes:2127934 (2.0 MiB) The guest's /etc/network/interfaces, in this case running Ubuntu 12.04 (ip removed): # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 176.9.xx.xx netmask 255.255.255.248 gateway 176.9.xx.xx # Host IP pointopoint 176.9.xx.xx # Host IP dns-nameservers 8.8.8.8 8.8.4.4 The output of ifconfig -a on the guest: eth0 Link encap:Ethernet HWaddr 52:54:cd:83:eb:aa inet addr:176.9.xx.xx Bcast:0.0.0.0 Mask:255.255.255.255 inet6 addr: fe80::5054:cdff:fe83:ebaa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14190 errors:0 dropped:0 overruns:0 frame:0 TX packets:1768 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2614642 (2.6 MB) TX bytes:82700 (82.7 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:954 errors:0 dropped:0 overruns:0 frame:0 TX packets:954 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:176679 (176.6 KB) TX bytes:176679 (176.6 KB) Output of ping -c4 on the guest: PING google.nl (173.194.35.151) 56(84) bytes of data. 64 bytes from muc03s01-in-f23.1e100.net (173.194.35.151): icmp_req=1 ttl=55 time=14.7 ms From static.174.82.xx.xx.clients.your-server.de (176.9.xx.xx): icmp_seq=2 Redirect Host(New nexthop: static.161.82.9.176.clients.your-server.de (176.9.82.161)) 64 bytes from muc03s01-in-f23.1e100.net (173.194.35.151): icmp_req=2 ttl=55 time=15.1 ms From static.198.170.9.176.clients.your-server.de (176.9.170.198) icmp_seq=3 Destination Host Unreachable From static.198.170.9.176.clients.your-server.de (176.9.170.198) icmp_seq=4 Destination Host Unreachable --- google.nl ping statistics --- 4 packets transmitted, 2 received, +2 errors, 50% packet loss, time 3002ms rtt min/avg/max/mdev = 14.797/14.983/15.170/0.223 ms, pipe 2 The static.174.82.xx.xx.clients.your-server.de (176.9.xx.xx) is the host's IP. I have encountered this problem with every guest OS I've tried, that being Fedora, Ubuntu (server/desktop) and Debian with an upgraded kernel. I've also tried compiling the guest kernel myself, to no avail. I have no problem with recompiling a kernel, though the host cannot afford any downtime. Any ideas on this problem are very welcome. EDIT: I can ping the host from inside the guest.

    Read the article

  • routing specific IP to ppp0 tunnel

    - by gompertz
    Hi All, I feel I've struggled with this long enough and need some help. I have a pptp tunnel and am trying to route destination traffic from 208.85.40.20 to the pptp tunnel (ppp0). (Keen observers may recognize the ip as being that of pandora.com). I am doing all this configuration on a router... and I know it's not working successfully as traceroute yields nothing but astericks. I've pasted relevant outputs below: (with some "security" editing to the addresses) root@OpenWrt:~# ifconfig br0 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:28185 errors:0 dropped:0 overruns:0 frame:0 TX packets:24936 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4894242 (4.6 MiB) TX bytes:5941902 (5.6 MiB) eth0 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:51829 errors:0 dropped:0 overruns:0 frame:0 TX packets:56824 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:11490288 (10.9 MiB) TX bytes:11857913 (11.3 MiB) Interrupt:4 eth2 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:15426 TX packets:9529 errors:21 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:423 (423.0 B) TX bytes:596036 (582.0 KiB) Interrupt:2 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:30 errors:0 dropped:0 overruns:0 frame:0 TX packets:30 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2300 (2.2 KiB) TX bytes:2300 (2.2 KiB) ppp0 Link encap:Point-Point Protocol inet addr:68.68.39.250 P-t-P:172.16.20.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1 RX packets:165 errors:2 dropped:0 overruns:0 frame:0 TX packets:68 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:7006 (6.8 KiB) TX bytes:3462 (3.3 KiB) vlan0 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:28182 errors:0 dropped:0 overruns:0 frame:0 TX packets:33813 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5006544 (4.7 MiB) TX bytes:6609774 (6.3 MiB) vlan1 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX inet addr:173.183.111.3 Bcast:173.183.111.255 Mask:255.255.224.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:23653 errors:0 dropped:0 overruns:0 frame:0 TX packets:23012 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5522012 (5.2 MiB) TX bytes:4982944 (4.7 MiB) wds0.4915 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wds0.4915 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@OpenWrt:~# cat /etc/ppp/ip-up iptables -A FORWARD -t filter -i br0 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -t filter -i ppp0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o ppp0 -s 192.168.1.1/24 -d 0/0 -j MASQUERADE iptables -A forwarding_rule -o ppp0 -j ACCEPT iptables -A forwarding_rule -i ppp0 -j ACCEPT iptables -t nat -A postrouting_rule -o ppp0 -j MASQUERADE root@OpenWrt:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.16.20.1 * 255.255.255.255 UH 0 0 0 ppp0 208.85.40.20 * 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 * 255.255.255.0 U 0 0 0 br0 173.183.192.0 * 255.255.224.0 U 0 0 0 vlan1 default d173-183-192-1. 0.0.0.0 UG 0 0 0 vlan1 default 192.168.1.1 0.0.0.0 UG 0 0 0 br0 Any advice is greatly appreciated, I'm not too great with network but am pretty astute at learning ;-)

    Read the article

  • New Netra SPARC T3 Servers

    - by Ferhat Hatay
    Today at the Mobile World Congress 2011, Oracle announced two new carrier-grade NEBS Level 3- certified servers: Oracle’s Netra SPARC T3-1 rackmount server and Oracle’s Netra SPARC T3-1BA ATCA blade server bringing the performance, scalability and power efficiency of the newest SPARC T3 processor to the communications market.    The Netra SPARC T3-1 server enclosure has a compact 20inch-deep carrier-grade rack-optimized design The new Netra SPARC T3 servers further expand Oracle’s complete portfolio for the communications industry, which includes carrier-grade servers, storage and application software to run operations support systems and service delivery platforms with easy migration capabilities and unmatched investment protection via the binary compatibility guarantee of the Oracle Solaris operating system. With advanced reliability, networking and security features built-in to Oracle Solaris – the most widely deployed carrier-grade OS – the systems announced today are uniquely suited for mission-critical core network infrastructure and service delivery. The world’s first carrier-grade system using the 16-core, 128-thread SPARC T3 processor, the Netra SPARC T3-1 server supports 2x the I/O bandwidth, 2x the memory and is 35 percent faster than the previous generation. With integrated on-chip 10 Gigabit Ethernet, on-chip cryptographic acceleration, and built-in, no-cost Oracle VM Server for SPARC and Oracle Solaris Containers for virtualization, the Netra SPARC T3-1 server is an ideal platform for consolidation, offering 128 virtual systems in a single server. As the next generation Netra SPARC ATCA blade, Netra SPARC T3-1BA ATCA blade server brings the PICMG 3.0 compatibility, NEBS Level 3 Certification, ETSI compliance and the Netra business practices to the customer solution. The Netra SPARC T3-1BA ATCA blade server can be mixed in the Sun Netra CT900 blade chassis with other ATCA UltraSPARC and x86 blades.     The Netra SPARC T3-1BA ATCA blade server   The Netra SPARC T3-1BA ATCA blade server delivers industry-leading scalability, density and cost efficiency with up to 36 SPARC T3 processors (3456 processing threads) in a single rack – a 50 percent increase over the previous generation. The Netra SPARC T3-1BA blade server also offers high-bandwidth and high-capacity I/O, with greater memory capacity to tackle the increasing business demands of the communications industry. For service providers faced with the rapid growth of broadband networks and the dramatic surge in global smartphone adoption, the new Netra SPARC T3 systems deliver continuous availability with massive scalability, tested and certified to run in the harshest conditions. More information Oracle’s Sun Netra Servers Scaling Throughput and Managing TCO with Oracle’s Netra SPARC T3-1 Servers Enabling End-to-End 10 Gigabit Ethernet in Oracle's Sun Netra ATCA Product Family Data Sheet: Netra SPARC T3-1BA ATCA Blade Server Data Sheet: Netra SPARC T3-1 Server Oracle Solaris: The Carrier Grade Operating System

    Read the article

  • KVM work with bridge network problems

    - by isware
    I try to configure bridge network for KVM(refer to http://www.linux-kvm.org/page/Networking), and it worked for Guest OS, but I have two problems with my Fedora host OS: 1?I can not access internet on host 2?The bridge configuration lost after reboot, I need to execute "service network restart" again to bring it up I checked here(http://serverfault.com/questions/168119/kvm-network-bridge-with-public-static-ip-for-both-host-and-guests) for the first problem, it seems not working for me. Any advice is appreciated! ifconfig -a eth0 Link encap:Ethernet HWaddr 48:5B:39:ED:EB:5A inet6 addr: fe80::4a5b:39ff:feed:eb5a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:231340 errors:0 dropped:0 overruns:0 frame:0 TX packets:413424 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:15335606 (14.6 MiB) TX bytes:114755796 (109.4 MiB) Interrupt:44 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:119307 errors:0 dropped:0 overruns:0 frame:0 TX packets:119307 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:57151264 (54.5 MiB) TX bytes:57151264 (54.5 MiB) sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) sw0 Link encap:Ethernet HWaddr 48:5B:39:ED:EB:5A inet addr:192.168.1.133 Bcast:255.255.255.255 Mask:255.255.255.0 inet6 addr: fe80::4a5b:39ff:feed:eb5a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:229584 errors:0 dropped:0 overruns:0 frame:0 TX packets:401232 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:11047463 (10.5 MiB) TX bytes:113891533 (108.6 MiB) tap0 Link encap:Ethernet HWaddr F2:86:1A:48:E2:55 inet6 addr: fe80::f086:1aff:fe48:e255/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:232 errors:0 dropped:0 overruns:0 frame:0 TX packets:2744 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:24842 (24.2 KiB) TX bytes:243899 (238.1 KiB) virbr0 Link encap:Ethernet HWaddr 9A:7C:09:6B:85:65 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:46 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:5513 (5.3 KiB)

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >