Search Results

Search found 385 results on 16 pages for 'broadband'.

Page 10/16 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

  • Two network cards in one Windows 7 PC

    - by Martin
    Hi, I've upgraded from Vista to Windows 7. On Vista I used to run one network card (Intel 82566DC -2 Gigabit) for my internet which was connected to a Dovado USB mobile broadband router connected to a 3G modem. The IP setup on the card is set on DHCP. The second card (3com Ethernet link) was used to connect to our town's local WUG (wireless user group) and all worked fine. Now the problem I have with Windows 7 is that when I connect to the internet with the (Intel) first card, the internet work fine but as soon as I connect the second card to the wug my internet drops. If I then disconnect the first card (internet one) and try to connect to the wug it works. It seems that the two cards are fighting each other. Is there maybe something I can do to fix the problem? As you probably can gather from this post is that I am not an expert on PC's so please if you do answer do I in simple terms. :) Thanks, Martin

    Read the article

  • Cookies blocked by router?

    - by Martin wiboe
    Hello, My friend has a D-Link DI-524 router that she uses for her home broadband. It's a pretty vanilla setup with the standard firewall settings, DHCP enabled etc. However, recently she has experienced something strange - cookies are not working on every computer on her LAN, whether using FF3.5 or IE8. I tried viewing the HTTP traffic using Fiddler2, and the requests come through fine (mind you, Internet browsing still works flawlessly) but whenever a website tries to set a cookie using the "Set-Cookie:" header, my computer sees that line as "Set-*ookie:" with the cookie contents removed. I have never seen anything like this - do you have any idea? Regards, Martin

    Read the article

  • maemo - n900 - SIP call quality

    - by Walter White
    Hi all, I have been using SIP / VoIP on my n900 to make calls and my problem is after about 15 minutes of talk time, more recently 18 minutes exactly, my connection dies and I can no longer hear them or them me. I have tested this with various VoIP providers to confirm that it is not specific to any one provider, but instead my phone. I also have tested this on my laptop. I sent my phone to be tested at some place that tests hardware and no problems were found with the hardware. What can I do to rectify the 15 minute call barrier with SIP on my phone? The other problem I have too is that for the wireless broadband to start working again, I need to restart the phone, it appears the network driver gets overloaded. The one thing that appears to work fine is making cellular calls. I have yet to have call quality drop off after 15 minutes over a cellular connection. Thanks, Walter

    Read the article

  • Windows 2008 RRAS and PPPoE

    - by Massimo
    I'm trying to use Windows Server 2008's Routing and Remote Access Server to share an ADSL connection which uses PPPoE, but I'm having no luck. I can setup the connection as a broadband Internet connection in Windows, and it works. I can share it using Internet Connection sharing, and it works (but it's not what I need). I have installed and enabled the Routing and Remote Access Service and configured it for NAT with a demand-dial interface; I create the aforementioned interface using PPPoE with the exact same parameters used on the Windows connection; I connected it, and it seems to work: I can also see it gets its public IP address and DNS assigned correctly. But it just doesn't work. The server has no Internet connectivity at all, and PINGing anything on the Internet results in a cryptic "general error". Any help?

    Read the article

  • Why can't I install apps on Windows 8 using specific dial-up modem connections?

    - by Vincent of Earth
    This problem has persisted since I first tried out Windows 8 Consumer Preview, and also affects Windows 8, Windows 8.1 Preview, and Windows 8.1. Specifically, the problem occurs when I try to install apps from the Windows Store on a Globe Tattoo Broadband or Smart Bro dial-up connection (two common ways of connecting to the internet in the Philippines). I can confirm that this isn't a problem with my copy of Windows or my Microsoft account because I was able to install any app on other connections like public WiFi. This problem has persisted on three different dongles and two different computers. So why can't I install apps on those two specific types of connections?

    Read the article

  • Set up router to vpn into proxy server

    - by NKimber
    I have a small network with a single LinkSys router connected to broadband in US via Comcast. I have a VPN proxy server account that I can use with a standard Windows connection, allowing me to have a geographic IP fingerprint in Europe, this is useful for a number of purposes. I want to setup a 2nd router that automatically connects via VPN to this proxy service, so any hardware that is connected to router 2 looks as though it is originating network requests in Europe, and any hardware connected to my main router has normal Comcast traffic (all requests are originating from USA). My 2nd router is a LinkSys WRT54G2, I'm having trouble getting this configured. Question, is what I'm trying to do even feasible? Should the WRT54G2 be able to do this with native functionality? Would flashing it with DD-WRT allow me to achieve my objectives? Any help/suggestions much appreciated. Neil

    Read the article

  • FTP an entire folder via the command line

    - by Chris Southam
    I'm looking so migrate some websites to a new server. I have SSH access to the current one but only FTP access to the new one. How can I via Centos and SSH copy entire folders to the new server via FTP? I can log into the new server via the built in FTP client on Centos but I'm not sure of the commands after this. I need to move the httpdocs folder from the old to the public_html folder of the new server. I'd love to do this server to server as it'll be a lot quicker than download - upload via my broadband connection. Yours, Chris

    Read the article

  • Norton Security Suite Symantec Download Manager Error: "Error writing to disk"

    - by Stephen Pace
    My broadband provider (Comcast) decided to switch their 'included with service' security suite from McAfee to Norton Security Suite. Their email directed me to a site that downloaded the Symantec Download Manager (NortonDL.exe) and that went fine. I'm running Windows 7 32-bit and running this application pops up the standard User Account Control message and the software is correctly identified as coming from Symantec. I answer 'yes' to allow the software to install and upon launch immediately get an "Error writing to disk" error. I searched the Internet for this error, but mainly I find Comcast users complaining about the same issue with no resolution other than to call Symantec. I found no one suggesting a successful workaround and it appeared that most of the support calls took up to three hours. I'd like to avoid that if possible. Ideas? To be honest, I'm getting close to bagging this installation and just moving to Microsoft Security Essentials.

    Read the article

  • How to make other computers connected to my workgroup able to browse my web server via my private local domain www.mydomain.local?

    - by Motivated Student
    Background I have a broadband connection. The fiber optic cable running from outside to my building is connected to a converter unit. The output of the converter is connected to a router. The router also provides 8 LAN ports to which the computers are connected. Shortly speaking, all computers are interconnected in a workgroup as opposed to a domain. My computer hosts an IIS web server using a private or local domain name www.mydomain.local. I has added 127.0.0.1 www.mydomain.local to the hosts file in the server C:\Windows\System32\drivers\etc so I can browse the site from within the server. So far so good. How to make other computers connected to my workgroup able to browse my web server via my private local domain www.mydomain.local? Note: Again, I am a newbie. I have no idea what I should do next.

    Read the article

  • QoS, Squid, Virgin superhub

    - by swiss196
    I'm a student and have just moved into a house of 6. We've setup 100mb broadband with Virgin and get quite good speeds on it so we're really pleased. However, as there are 6 of us, who all like to stream/game/download etc I was looking at setting up QoS to ensure speeds were fair/equal etc. I looked into it and found out that the Virgin Superhub can't do it out of the box, so my next option is to setup squid proxy on my machine (always on) to act as at transparent proxy and provide QoS etc. However, I'm not really sure how to do this and had a look on the Internet but couldn't see any guides as such! I was wondering if someone could give me some more and perhaps provider a summary of the steps involved - and let me know if this is possible with the SuperHub etc. Thanks, Dave

    Read the article

  • How to access internet from 2 laptops with data card plugged-in in one of the machine?

    - by learnerforever
    Hi, I have 2 laptops - one running Windows XP and other running Vista. Both have wifi card.I have one Reliance broadband data card. I want to be able to access internet on both the machines simultaneously using this one data card. Please help. I think, there would be many many ways to do it. I do have some linksys router but any simple quick way without any extra hardware? like we could set up p2p or WLAN between these 2 machines, because both have wifi card so we shouldn't compulsorily need any extra hardware(?) I am fine with connecting data card to either of the machines. Thanks,

    Read the article

  • How to access internet from 2 laptops with data card plugged-in in one of the machine?

    - by learnerforever
    Hi, I have 2 laptops - one running Windows XP and other running Vista. Both have wifi card.I have one Reliance broadband data card. I want to be able to access internet on both the machines simultaneously using this one data card. Please help. I think, there would be many many ways to do it. I do have some linksys router but any simple quick way without any extra hardware? like we could set up p2p or WLAN between these 2 machines, because both have wifi card so we shouldn't compulsorily need any extra hardware(?) I am fine with connecting data card to either of the machines. Thanks,

    Read the article

  • How do I set up a shared internet on a network using computer hooked up to a router

    - by Skadlig
    I got a wireless broadband modem (Huawei E1750) hooked up to my computer (call it A., running Windows-7) whose internet I wish to share to my other computer (call it B., also running Windows-7). A. is hooked up to my d-link DIR-600 router using a wired connection to port 1 on the router. B. is connected to the router using a wireless connection. Now I have tried setting up the sharing according to the help files for ICS but I have not been able to get it working. I suspect that there is something in my hardware configuration that is making it difficult. I would appreciate some tips and pointers as to what could be the reason to my problems.

    Read the article

  • How can I join two simple home networks together using an ethernet cable?

    - by Ilia Jerebtsov
    I want to join two different home networks together like so: PC A1 PC A2 PC B1 PC B2 \ / \ / Gateway A <----- ethr. cable -----> Gateway B | | ADSL modem A ADSL modem B Both networks are of the basic residential type with identical configuration, with all PCs running Vista/7. The point is to temporarily join two apartments in a building for gaming and file sharing, and the holy grail would be: PCs on network A can access PCs on network B and vice-versa (file shares and gaming). Each network uses its own internet connection. Data between networks shouldn't take a trip through the internet (broadband upload speeds are severely capped) A network's internet access should continue working if the joining cable is disconnected with minimal configuration changes. How closely can this be achieved?

    Read the article

  • CentOS connect to the internet

    - by Delirium tremens
    I installed CentOS, but it didn't automatically connect to the internet. Is that the normal behavior? I have Ethernet Broadband Router DI-604 and WebStar DPX2203 series Cablemodem with EMTA . What should I do to connect to the internet? Update: A cousin told me my ethernet adapter or network board will depend on my motherboard. My computer upgrade document says the motherboard is gigabyte video onboard. I heard gigabyte's network adapters are Gigabit or Realtek. In CentOS, System - Administration - Network - New - Ethernet, first, only "Other Network Board" was listed, so I selected it and clicked Next, then there wasn't Gigabit, but there was Realtek, so I selected Realtek. I heard with Net Virtua selecting dhcp the things first answered asked me to tell first answerer are automatically configured. So I tried Realtek with dhcp, but it still didn't work.

    Read the article

  • router cannot get ip address

    - by user43208
    Hi guys, I have a linksys router WRT54G2 connected to a cable broadband. Just last week, everything was working perfectly - I would be able to connect my laptop to the internet using WiFi. However, starting last week, I suddenly lost my internet connection. At first I thought something was wrong with my ISP. However, when I tried connecting the cable directly to my laptop, I found out that there was no problem with the internet connection after all. It appears that it is only my router that cannot get IP address. I have already tried cloning my MAC address and reconfiguring my router using the setup CD, but nothing worked. What could be the problem here? Thank you. Regards, Erwin

    Read the article

  • Monitoring remote laptops

    - by kaerast
    We're looking for something to monitor around 30 remote laptops that are constantly out on the road, never returning to base except for when there are serious hardware faults that need repairing. These laptops won't always be connected to the internet, they'll have mobile broadband and may work offline most of the time. They will be running a mixture of Windows XP, Vista and 7 and there is currently no server setup. We're primarily interested in making sure that Windows Updates and antivirus updates are happening, and I guess we should also be monitoring remaining disk space, what software is installed and ideally hardware health. It might also be nice if we could gain remote access to perform work on them. My main reason for wanting to monitor them is that it's going to be a real pain to get them back to base if anything goes wrong, so I want to be proactive in ensuring they last as long as possible. Can you recommend what I should be monitoring to ensure a long life? What tools would you use to monitor and maintain these computers?

    Read the article

  • LinkSys router suddenly cannot get an IP address

    - by user43208
    I have a linksys router WRT54G2 connected to a cable broadband. Just last week, everything was working perfectly - I would be able to connect my laptop to the internet using WiFi. However, starting last week, I suddenly lost my internet connection. At first I thought something was wrong with my ISP. However, when I tried connecting the cable directly to my laptop, I found out that there was no problem with the internet connection after all. It appears that it is only my router that cannot get IP address. I have already tried cloning my MAC address and reconfiguring my router using the setup CD, but nothing worked. What could be the problem here? Thank you. Regards, Erwin

    Read the article

  • LinkSys router suddenly cannot get an IP address

    - by user43208
    I have a linksys router WRT54G2 connected to a cable broadband. Just last week, everything was working perfectly - I would be able to connect my laptop to the internet using WiFi. However, starting last week, I suddenly lost my internet connection. At first I thought something was wrong with my ISP. However, when I tried connecting the cable directly to my laptop, I found out that there was no problem with the internet connection after all. It appears that it is only my router that cannot get IP address. I have already tried cloning my MAC address and reconfiguring my router using the setup CD, but nothing worked. What could be the problem here? Thank you. Regards, Erwin

    Read the article

  • WIFI: iPhone/iPad getting much slower bandwidth than laptop

    - by Sam
    I just got cable internet installed (Comcast). It claims that my down speed should be 25mbit. Over wifi, I get close to that on my laptop, but only about 8 on average with my iPhone/iPad. I'm using testmy.net in the browser on all devices. I have an ARRIS / Motorola SurfBoard SB6141 DOCSIS 3.0 Cable Modem and a Medialink Wireless N Broadband Router. I read somewhere that disabling WMM and the firewall on the router would help (is this even a safe idea?). I've tried both, and neither seem to make much of a difference, if any at all (sidebar: I've noticed that my download speeds vary wildly with cable internet... on my laptop, I'll get 12 down, then 22 five minutes later. Is this typical for cable internet?).

    Read the article

  • FTP error 424 failed to establish connection

    - by cKK
    Getting "ftp error 425 failed to establish connection" when trying to connect to ftp server. Tried 2 ftp clients on 3 machines on same network and none work. However FTP works from home / mobile broadband. No ip blocks on ftp sever. Other ftp servers(differrent ip/hosts) work okay. firewall setup correct, no ports blocked. Is it possible to use a proxy for ftp a i think it's something with the ISP but taking too long to fix?

    Read the article

  • FTP error 425 failed to establish connection

    - by cKK
    Getting "ftp error 425 failed to establish connection" when trying to connect to ftp server. Tried 2 ftp clients on 3 machines on same network and none work. However FTP works from home / mobile broadband. No ip blocks on ftp sever. Other ftp servers(differrent ip/hosts) work okay. firewall setup correct, no ports blocked. Is it possible to use a proxy for ftp a i think it's something with the ISP but taking too long to fix?

    Read the article

  • setting up an access point from laptop to provide internet

    - by Avo
    i am trying to connect my wireless router as an access point from my laptop. the scenario is as follows: i have a wireless broadband connection at home, which i connect to using a username and a password. this username and password is unique, and can be used by one computer at a time!.. my sister and i can't have internet both at the same time! so im trying to connect my wireless router to my laptop with a physical cable so that i can provide internet via WiFi... first off, is this possible?!.. if not, what are my options? if it is possible, how do i set it up? a link to the appropriate steps would do as well, but i need it :(... thank you in advance, /av

    Read the article

  • My D-Link's Ethernet bridge downlink just got 10-30x slower?

    - by Jay Levitt
    TL;DR: I unplugged my network to move my desk, and now downloading via my DIR-655's Ethernet LAN bridge is 10-30x slower than the Ethernet switch it's plugged into. Background My network is SMC cable modem <-> Cisco firewall <-> Netgear switch <-> D-Link WiFi† | | | | SMC8014 ASA-5505 GS608v2 gigE DIR-655 rev A3 gigE †The DIR-655 is used as an access point, not a router (although what D-Link calls an access point, I'd call a bridge). The "WAN" port is unused; the Netgear connects to the built-in 4-port Ethernet LAN switch, inside the built- in router/firewall. Endpoints: MacBook Pro 17" mid-2010 iPhone 4S Fedora 12 Linux server running reasonably fast dual-Athlon X2, VelociRaptors, etc. All cables are <10 feet, mostly CAT-5e, some CAT-6, all premade. All WiFi endpoints are within three feet of the D-Link. Yesterday I unplugged and rearranged stuff, and now connecting via the D-Link - even through the wired switch, right next to the incoming network cable - is 30x slower than connecting directly to the Netgear switch, on both my MacBook and iPhone. How I'm measuring "slower" I'm mostly using http://speedtest.net, which of course only really measures broadband speeds. I've also installed http://www.speedtest.net/mini.php on my local server, but can't test the iPhone with that. Results Speedtest.net, closest server over Comcast business-class: CONFIG | PING (ms) | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> Netgear | 9 | 31.6 | 6.8 Mac <-> Ethernet <-> D-Link | 8 | 4.1 | 6.0 Mac <-> WiFi <-> D-Link | 9 | 1.4 | 2.9 iPhone <-> WiFi <-> D-Link | 67 | 0.4 | 1.6 Speedtest Mini on Linux PC: CONFIG | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> NetGear | 97.2 | 76.9 Mac <-> Ethernet <-> D-Link | 8.2 | 24.2 Mac <-> WiFi <-> D-Link | 1.0 | 8.6 Slow typing in SSH: Mac <-> Ethernet <-> Netgear <-> Linux PC: smooth Mac <-> Ethernet <-> D-Link <-> Linux PC: choppy Note that D-Link upload speeds are normal on broadband, slower locally (but I'd believe that's a D-Link limitation), and always faster than the downloads! Since ssh is choppy just with slow typing, I don't believe it's a throttling-type problem either; that's not a lot of bandwidth. What I've tried Swapping all "good" and "bad" cables Re-plugging "bad" cable from D-Link to Netgear and watching it be the "good" cable pulling cables away from power lines Verify that the Mac auto-detects the D-Link as gigE Try to verify the link speed of the D-Link <- Netgear connection, but the firmware doesn't report that Verify that the D-Link sees no TX/RX errors or collisions Use different Ethernet ports on both Netgear and D-Link Reset the D-Link to factory settings Upgrade the D-Link firmware from 1.21 to 1.35NA, 2010/11/12, the latest Reboot everything at least once On the Mac, disable Wi-Fi during the Ethernet tests, and unplug Ethernet during the Wi-Fi tests Using iStumbler, verify that the D-Link isn't picking overloaded Wi-Fi channels (usually just 1-5 neighbors on my and adjacent channels, average for my apt building) Verify that the only client connected to the Wi-Fi was the iPhone Verify that nothing was being chatty on my network according to the WISH log Enable and disable all sorts of D-Link settings, including forcing WAN auto-detect to gigE So. I don't mind buying a new access point—I wouldn't mind having a dual-link network—but as a guy who's been networking since gated v4 was a drastic rewrite, and who often used physical sniffers in the days before Wireshark, I'm baffled. I hate being baffled. What could I possibly have changed that would result in this? How can I measure it? All I can think of is a static zap—thick carpet, socks, HVAC—but I didn't feel one, and does that really happen anymore? Can I test if it's Ethernet vs. TCP layer slowness? I'm not familiar with modern network utilities; it's hard to Google without hitting "Q: Why is my network slow? A: Is your microwave on?" If I don't get an answer here, will someone big and powerful help me migrate it to serverfault without getting screamed back here? In the words of Inigo Montoya, "I must know." Don't get all Dread Pirate Roberts on me.

    Read the article

  • Server problem (duh)

    - by j-t-s
    Sorry the title couldn't be more specific. I installed Abyss Web Server. I'm running Windows XP Home Edition and I have Wireless Mobile Broadband internet. I used to be able to access (and other people on other networks) my site by entering my ip address in the browser, but after I formatted, and the installed abyss web server again, this does not work anymore. There are no errors. I CAN visit my own site by entering my ip address BUT anybody else can't do the same, it just says "connecting" in the browser's statusbar and it never changes. I have consulted the docs and have found no help. Google hasn't helped with this problem either. Can somebody please help? Thank you :)

    Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16  | Next Page >