Search Results

Search found 25660 results on 1027 pages for 'booting issue'.

Page 1021/1027 | < Previous Page | 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027  | Next Page >

• C#/.NET Little Wonders: The Concurrent Collections (1 of 3)

  - by James Michael Hare

  Once again we consider some of the lesser known classes and keywords of C#.  In the next few weeks, we will discuss the concurrent collections and how they have changed the face of concurrent programming. This week’s post will begin with a general introduction and discuss the ConcurrentStack<T> and ConcurrentQueue<T>.  Then in the following post we’ll discuss the ConcurrentDictionary<T> and ConcurrentBag<T>.  Finally, we shall close on the third post with a discussion of the BlockingCollection<T>. For more of the "Little Wonders" posts, see the index here. A brief history of collections In the beginning was the .NET 1.0 Framework.  And out of this framework emerged the System.Collections namespace, and it was good.  It contained all the basic things a growing programming language needs like the ArrayList and Hashtable collections.  The main problem, of course, with these original collections is that they held items of type object which means you had to be disciplined enough to use them correctly or you could end up with runtime errors if you got an object of a type you weren't expecting. Then came .NET 2.0 and generics and our world changed forever!  With generics the C# language finally got an equivalent of the very powerful C++ templates.  As such, the System.Collections.Generic was born and we got type-safe versions of all are favorite collections.  The List<T> succeeded the ArrayList and the Dictionary<TKey,TValue> succeeded the Hashtable and so on.  The new versions of the library were not only safer because they checked types at compile-time, in many cases they were more performant as well.  So much so that it's Microsoft's recommendation that the System.Collections original collections only be used for backwards compatibility. So we as developers came to know and love the generic collections and took them into our hearts and embraced them.  The problem is, thread safety in both the original collections and the generic collections can be problematic, for very different reasons. Now, if you are only doing single-threaded development you may not care – after all, no locking is required.  Even if you do have multiple threads, if a collection is “load-once, read-many” you don’t need to do anything to protect that container from multi-threaded access, as illustrated below: 1: public static class OrderTypeTranslator 2: { 3: // because this dictionary is loaded once before it is ever accessed, we don't need to synchronize 4: // multi-threaded read access 5: private static readonly Dictionary<string, char> _translator = new Dictionary<string, char> 6: { 7: {"New", 'N'}, 8: {"Update", 'U'}, 9: {"Cancel", 'X'} 10: }; 11:  12: // the only public interface into the dictionary is for reading, so inherently thread-safe 13: public static char? Translate(string orderType) 14: { 15: char charValue; 16: if (_translator.TryGetValue(orderType, out charValue)) 17: { 18: return charValue; 19: } 20:  21: return null; 22: } 23: } Unfortunately, most of our computer science problems cannot get by with just single-threaded applications or with multi-threading in a load-once manner.  Looking at  today's trends, it's clear to see that computers are not so much getting faster because of faster processor speeds -- we've nearly reached the limits we can push through with today's technologies -- but more because we're adding more cores to the boxes.  With this new hardware paradigm, it is even more important to use multi-threaded applications to take full advantage of parallel processing to achieve higher application speeds. So let's look at how to use collections in a thread-safe manner. Using historical collections in a concurrent fashion The early .NET collections (System.Collections) had a Synchronized() static method that could be used to wrap the early collections to make them completely thread-safe.  This paradigm was dropped in the generic collections (System.Collections.Generic) because having a synchronized wrapper resulted in atomic locks for all operations, which could prove overkill in many multithreading situations.  Thus the paradigm shifted to having the user of the collection specify their own locking, usually with an external object: 1: public class OrderAggregator 2: { 3: private static readonly Dictionary<string, List<Order>> _orders = new Dictionary<string, List<Order>>(); 4: private static readonly _orderLock = new object(); 5:  6: public void Add(string accountNumber, Order newOrder) 7: { 8: List<Order> ordersForAccount; 9:  10: // a complex operation like this should all be protected 11: lock (_orderLock) 12: { 13: if (!_orders.TryGetValue(accountNumber, out ordersForAccount)) 14: { 15: _orders.Add(accountNumber, ordersForAccount = new List<Order>()); 16: } 17:  18: ordersForAccount.Add(newOrder); 19: } 20: } 21: } Notice how we’re performing several operations on the dictionary under one lock.  With the Synchronized() static methods of the early collections, you wouldn’t be able to specify this level of locking (a more macro-level).  So in the generic collections, it was decided that if a user needed synchronization, they could implement their own locking scheme instead so that they could provide synchronization as needed. The need for better concurrent access to collections Here’s the problem: it’s relatively easy to write a collection that locks itself down completely for access, but anything more complex than that can be difficult and error-prone to write, and much less to make it perform efficiently!  For example, what if you have a Dictionary that has frequent reads but in-frequent updates?  Do you want to lock down the entire Dictionary for every access?  This would be overkill and would prevent concurrent reads.  In such cases you could use something like a ReaderWriterLockSlim which allows for multiple readers in a lock, and then once a writer grabs the lock it blocks all further readers until the writer is done (in a nutshell).  This is all very complex stuff to consider. Fortunately, this is where the Concurrent Collections come in.  The Parallel Computing Platform team at Microsoft went through great pains to determine how to make a set of concurrent collections that would have the best performance characteristics for general case multi-threaded use. Now, as in all things involving threading, you should always make sure you evaluate all your container options based on the particular usage scenario and the degree of parallelism you wish to acheive. This article should not be taken to understand that these collections are always supperior to the generic collections. Each fills a particular need for a particular situation. Understanding what each container is optimized for is key to the success of your application whether it be single-threaded or multi-threaded. General points to consider with the concurrent collections The MSDN points out that the concurrent collections all support the ICollection interface. However, since the collections are already synchronized, the IsSynchronized property always returns false, and SyncRoot always returns null.  Thus you should not attempt to use these properties for synchronization purposes. Note that since the concurrent collections also may have different operations than the traditional data structures you may be used to.  Now you may ask why they did this, but it was done out of necessity to keep operations safe and atomic.  For example, in order to do a Pop() on a stack you have to know the stack is non-empty, but between the time you check the stack’s IsEmpty property and then do the Pop() another thread may have come in and made the stack empty!  This is why some of the traditional operations have been changed to make them safe for concurrent use. In addition, some properties and methods in the concurrent collections achieve concurrency by creating a snapshot of the collection, which means that some operations that were traditionally O(1) may now be O(n) in the concurrent models.  I’ll try to point these out as we talk about each collection so you can be aware of any potential performance impacts.  Finally, all the concurrent containers are safe for enumeration even while being modified, but some of the containers support this in different ways (snapshot vs. dirty iteration).  Once again I’ll highlight how thread-safe enumeration works for each collection. ConcurrentStack<T>: The thread-safe LIFO container The ConcurrentStack<T> is the thread-safe counterpart to the System.Collections.Generic.Stack<T>, which as you may remember is your standard last-in-first-out container.  If you think of algorithms that favor stack usage (for example, depth-first searches of graphs and trees) then you can see how using a thread-safe stack would be of benefit. The ConcurrentStack<T> achieves thread-safe access by using System.Threading.Interlocked operations.  This means that the multi-threaded access to the stack requires no traditional locking and is very, very fast! For the most part, the ConcurrentStack<T> behaves like it’s Stack<T> counterpart with a few differences: Pop() was removed in favor of TryPop() Returns true if an item existed and was popped and false if empty. PushRange() and TryPopRange() were added Allows you to push multiple items and pop multiple items atomically. Count takes a snapshot of the stack and then counts the items. This means it is a O(n) operation, if you just want to check for an empty stack, call IsEmpty instead which is O(1). ToArray() and GetEnumerator() both also take snapshots. This means that iteration over a stack will give you a static view at the time of the call and will not reflect updates. Pushing on a ConcurrentStack<T> works just like you’d expect except for the aforementioned PushRange() method that was added to allow you to push a range of items concurrently. 1: var stack = new ConcurrentStack<string>(); 2:  3: // adding to stack is much the same as before 4: stack.Push("First"); 5:  6: // but you can also push multiple items in one atomic operation (no interleaves) 7: stack.PushRange(new [] { "Second", "Third", "Fourth" }); For looking at the top item of the stack (without removing it) the Peek() method has been removed in favor of a TryPeek().  This is because in order to do a peek the stack must be non-empty, but between the time you check for empty and the time you execute the peek the stack contents may have changed.  Thus the TryPeek() was created to be an atomic check for empty, and then peek if not empty: 1: // to look at top item of stack without removing it, can use TryPeek. 2: // Note that there is no Peek(), this is because you need to check for empty first. TryPeek does. 3: string item; 4: if (stack.TryPeek(out item)) 5: { 6: Console.WriteLine("Top item was " + item); 7: } 8: else 9: { 10: Console.WriteLine("Stack was empty."); 11: } Finally, to remove items from the stack, we have the TryPop() for single, and TryPopRange() for multiple items.  Just like the TryPeek(), these operations replace Pop() since we need to ensure atomically that the stack is non-empty before we pop from it: 1: // to remove items, use TryPop or TryPopRange to get multiple items atomically (no interleaves) 2: if (stack.TryPop(out item)) 3: { 4: Console.WriteLine("Popped " + item); 5: } 6:  7: // TryPopRange will only pop up to the number of spaces in the array, the actual number popped is returned. 8: var poppedItems = new string[2]; 9: int numPopped = stack.TryPopRange(poppedItems); 10:  11: foreach (var theItem in poppedItems.Take(numPopped)) 12: { 13: Console.WriteLine("Popped " + theItem); 14: } Finally, note that as stated before, GetEnumerator() and ToArray() gets a snapshot of the data at the time of the call.  That means if you are enumerating the stack you will get a snapshot of the stack at the time of the call.  This is illustrated below: 1: var stack = new ConcurrentStack<string>(); 2:  3: // adding to stack is much the same as before 4: stack.Push("First"); 5:  6: var results = stack.GetEnumerator(); 7:  8: // but you can also push multiple items in one atomic operation (no interleaves) 9: stack.PushRange(new [] { "Second", "Third", "Fourth" }); 10:  11: while(results.MoveNext()) 12: { 13: Console.WriteLine("Stack only has: " + results.Current); 14: } The only item that will be printed out in the above code is "First" because the snapshot was taken before the other items were added. This may sound like an issue, but it’s really for safety and is more correct.  You don’t want to enumerate a stack and have half a view of the stack before an update and half a view of the stack after an update, after all.  In addition, note that this is still thread-safe, whereas iterating through a non-concurrent collection while updating it in the old collections would cause an exception. ConcurrentQueue<T>: The thread-safe FIFO container The ConcurrentQueue<T> is the thread-safe counterpart of the System.Collections.Generic.Queue<T> class.  The concurrent queue uses an underlying list of small arrays and lock-free System.Threading.Interlocked operations on the head and tail arrays.  Once again, this allows us to do thread-safe operations without the need for heavy locks! The ConcurrentQueue<T> (like the ConcurrentStack<T>) has some departures from the non-concurrent counterpart.  Most notably: Dequeue() was removed in favor of TryDequeue(). Returns true if an item existed and was dequeued and false if empty. Count does not take a snapshot It subtracts the head and tail index to get the count.  This results overall in a O(1) complexity which is quite good.  It’s still recommended, however, that for empty checks you call IsEmpty instead of comparing Count to zero. ToArray() and GetEnumerator() both take snapshots. This means that iteration over a queue will give you a static view at the time of the call and will not reflect updates. The Enqueue() method on the ConcurrentQueue<T> works much the same as the generic Queue<T>: 1: var queue = new ConcurrentQueue<string>(); 2:  3: // adding to queue is much the same as before 4: queue.Enqueue("First"); 5: queue.Enqueue("Second"); 6: queue.Enqueue("Third"); For front item access, the TryPeek() method must be used to attempt to see the first item if the queue.  There is no Peek() method since, as you’ll remember, we can only peek on a non-empty queue, so we must have an atomic TryPeek() that checks for empty and then returns the first item if the queue is non-empty. 1: // to look at first item in queue without removing it, can use TryPeek. 2: // Note that there is no Peek(), this is because you need to check for empty first. TryPeek does. 3: string item; 4: if (queue.TryPeek(out item)) 5: { 6: Console.WriteLine("First item was " + item); 7: } 8: else 9: { 10: Console.WriteLine("Queue was empty."); 11: } Then, to remove items you use TryDequeue().  Once again this is for the same reason we have TryPeek() and not Peek(): 1: // to remove items, use TryDequeue. If queue is empty returns false. 2: if (queue.TryDequeue(out item)) 3: { 4: Console.WriteLine("Dequeued first item " + item); 5: } Just like the concurrent stack, the ConcurrentQueue<T> takes a snapshot when you call ToArray() or GetEnumerator() which means that subsequent updates to the queue will not be seen when you iterate over the results.  Thus once again the code below will only show the first item, since the other items were added after the snapshot. 1: var queue = new ConcurrentQueue<string>(); 2:  3: // adding to queue is much the same as before 4: queue.Enqueue("First"); 5:  6: var iterator = queue.GetEnumerator(); 7:  8: queue.Enqueue("Second"); 9: queue.Enqueue("Third"); 10:  11: // only shows First 12: while (iterator.MoveNext()) 13: { 14: Console.WriteLine("Dequeued item " + iterator.Current); 15: } Using collections concurrently You’ll notice in the examples above I stuck to using single-threaded examples so as to make them deterministic and the results obvious.  Of course, if we used these collections in a truly multi-threaded way the results would be less deterministic, but would still be thread-safe and with no locking on your part required! For example, say you have an order processor that takes an IEnumerable<Order> and handles each other in a multi-threaded fashion, then groups the responses together in a concurrent collection for aggregation.  This can be done easily with the TPL’s Parallel.ForEach(): 1: public static IEnumerable<OrderResult> ProcessOrders(IEnumerable<Order> orderList) 2: { 3: var proxy = new OrderProxy(); 4: var results = new ConcurrentQueue<OrderResult>(); 5:  6: // notice that we can process all these in parallel and put the results 7: // into our concurrent collection without needing any external locking! 8: Parallel.ForEach(orderList, 9: order => 10: { 11: var result = proxy.PlaceOrder(order); 12:  13: results.Enqueue(result); 14: }); 15:  16: return results; 17: } Summary Obviously, if you do not need multi-threaded safety, you don’t need to use these collections, but when you do need multi-threaded collections these are just the ticket! The plethora of features (I always think of the movie The Three Amigos when I say plethora) built into these containers and the amazing way they acheive thread-safe access in an efficient manner is wonderful to behold. Stay tuned next week where we’ll continue our discussion with the ConcurrentBag<T> and the ConcurrentDictionary<TKey,TValue>. For some excellent information on the performance of the concurrent collections and how they perform compared to a traditional brute-force locking strategy, see this wonderful whitepaper by the Microsoft Parallel Computing Platform team here.   Tweet Technorati Tags: C#,.NET,Concurrent Collections,Collections,Multi-Threading,Little Wonders,BlackRabbitCoder,James Michael Hare

  Read the article

• Rounded Corners and Shadows &ndash; Dialogs with CSS

  - by Rick Strahl

  Well, it looks like we’ve finally arrived at a place where at least all of the latest versions of main stream browsers support rounded corners and box shadows. The two CSS properties that make this possible are box-shadow and box-radius. Both of these CSS Properties now supported in all the major browsers as shown in this chart from QuirksMode: In it’s simplest form you can use box-shadow and border radius like this: .boxshadow { -moz-box-shadow: 3px 3px 5px #535353; -webkit-box-shadow: 3px 3px 5px #535353; box-shadow: 3px 3px 5px #535353; } .roundbox { -moz-border-radius: 6px 6px 6px 6px; -webkit-border-radius: 6px; border-radius: 6px 6px 6px 6px; } box-shadow: horizontal-shadow-pixels vertical-shadow-pixels blur-distance shadow-color box-shadow attributes specify the the horizontal and vertical offset of the shadow, the blur distance (to give the shadow a smooth soft look) and a shadow color. The spec also supports multiple shadows separated by commas using the attributes above but we’re not using that functionality here. box-radius: top-left-radius top-right-radius bottom-right-radius bottom-left-radius border-radius takes a pixel size for the radius for each corner going clockwise. CSS 3 also specifies each of the individual corner elements such as border-top-left-radius, but support for these is much less prevalent so I would recommend not using them for now until support improves. Instead use the single box-radius to specify all corners. Browser specific Support in older Browsers Notice that there are two variations: The actual CSS 3 properties (box-shadow and box-radius) and the browser specific ones (-moz, –webkit prefixes for FireFox and Chrome/Safari respectively) which work in slightly older versions of modern browsers before official CSS 3 support was added. The goal is to spread support as widely as possible and the prefix versions extend the range slightly more to those browsers that provided early support for these features. Notice that box-shadow and border-radius are used after the browser specific versions to ensure that the latter versions get precedence if the browser supports both (last assignment wins). Use the .boxshadow and .roundbox Styles in HTML To use these two styles create a simple rounded box with a shadow you can use HTML like this: <!-- Simple Box with rounded corners and shadow --> <div class="roundbox boxshadow" style="width: 550px; border: solid 2px steelblue"> <div class="boxcontenttext"> Simple Rounded Corner Box. </div> </div> which looks like this in the browser: This works across browsers and it’s pretty sweet and simple. Watch out for nested Elements! There are a couple of things to be aware of however when using rounded corners. Specifically, you need to be careful when you nest other non-transparent content into the rounded box. For example check out what happens when I change the inside <div> to have a colored background: <!-- Simple Box with rounded corners and shadow --> <div class="roundbox boxshadow" style="width: 550px; border: solid 2px steelblue"> <div class="boxcontenttext" style="background: khaki;"> Simple Rounded Corner Box. </div> </div> which renders like this:   If you look closely you’ll find that the inside <div>’s corners are not rounded and so ‘poke out’ slightly over the rounded corners. It looks like the rounded corners are ‘broken’ up instead of a solid rounded line around the corner, which his pretty ugly. The bigger the radius the more drastic this effect becomes . To fix this issue the inner <div> also has have rounded corners at the same or slightly smaller radius than the outer <div>. The simple fix for this is to simply also apply the roundbox style to the inner <div> in addition to the boxcontenttext style already applied: <div class="boxcontenttext roundbox" style="background: khaki;"> The fixed display now looks proper: Separate Top and Bottom Elements This gets even a little more tricky if you have an element at the top or bottom only of the rounded box. What if you need to add something like a header or footer <div> that have non-transparent backgrounds which is a pretty common scenario? In those cases you want only the top or bottom corners rounded and not both. To make this work a couple of additional styles to round only the top and bottom corners can be created: .roundbox-top { -moz-border-radius: 4px 4px 0 0; -webkit-border-radius: 4px 4px 0 0; border-radius: 4px 4px 0 0; } .roundbox-bottom { -moz-border-radius: 0 0 4px 4px; -webkit-border-radius: 0 0 4px 4px; border-radius: 0 0 4px 4px; } Notice that radius used for the ‘inside’ rounding is smaller (4px) than the outside radius (6px). This is so the inner radius fills into the outer border – if you use the same size you may have some white space showing between inner and out rounded corners. Experiment with values to see what works – in my experimenting the behavior across browsers here is consistent (thankfully). These styles can be applied in addition to other styles to make only the top or bottom portions of an element rounded. For example imagine I have styles like this: .gridheader, .gridheaderbig, .gridheaderleft, .gridheaderright { padding: 4px 4px 4px 4px; background: #003399 url(images/vertgradient.png) repeat-x; text-align: center; font-weight: bold; text-decoration: none; color: khaki; } .gridheaderleft { text-align: left; } .gridheaderright { text-align: right; } .gridheaderbig { font-size: 135%; } If I just apply say gridheader by itself in HTML like this: <div class="roundbox boxshadow" style="width: 550px; border: solid 2px steelblue"> <div class="gridheaderleft">Box with a Header</div> <div class="boxcontenttext" style="background: khaki;"> Simple Rounded Corner Box. </div> </div> This results in a pretty funky display – again due to the fact that the inner elements render square rather than rounded corners: If you look close again you can see that both the header and the main content have square edges which jumps out at the eye. To fix this you can now apply the roundbox-top and roundbox-bottom to the header and content respectively: <div class="roundbox boxshadow" style="width: 550px; border: solid 2px steelblue"> <div class="gridheaderleft roundbox-top">Box with a Header</div> <div class="boxcontenttext roundbox-bottom" style="background: khaki;"> Simple Rounded Corner Box. </div> </div> Which now gives the proper display with rounded corners both on the top and bottom: All of this is sweet to be supported – at least by the newest browser – without having to resort to images and nasty JavaScripts solutions. While this is still not a mainstream feature yet for the majority of actually installed browsers, the majority of browser users are very likely to have this support as most browsers other than IE are actively pushing users to upgrade to newer versions. Since this is a ‘visual display only feature it degrades reasonably well in non-supporting browsers: You get an uninteresting square and non-shadowed browser box, but the display is still overall functional. The main sticking point – as always is Internet Explorer versions 8.0 and down as well as older versions of other browsers. With those browsers you get a functional view that is a little less interesting to look at obviously: but at least it’s still functional. Maybe that’s just one more incentive for people using older browsers to upgrade to a  more modern browser :-) Creating Dialog Related Styles In a lot of my AJAX based applications I use pop up windows which effectively work like dialogs. Using the simple CSS behaviors above, it’s really easy to create some fairly nice looking overlaid windows with nothing but CSS. Here’s what a typical ‘dialog’ I use looks like: The beauty of this is that it’s plain CSS – no plug-ins or images (other than the gradients which are optional) required. Add jQuery-ui draggable (or ww.jquery.js as shown below) and you have a nice simple inline implementation of a dialog represented by a simple <div> tag. Here’s the HTML for this dialog: <div id="divDialog" class="dialog boxshadow" style="width: 450px;"> <div class="dialog-header"> <div class="closebox"></div> User Sign-in </div> <div class="dialog-content"> <label>Username:</label> <input type="text" name="txtUsername" value=" " /> <label>Password</label> <input type="text" name="txtPassword" value=" " /> <hr /> <input type="button" id="btnLogin" value="Login" /> </div> <div class="dialog-statusbar">Ready</div> </div> Most of this behavior is driven by the ‘dialog’ styles which are fairly basic and easy to understand. They do use a few support images for the gradients which are provided in the sample I’ve provided. Here’s what the CSS looks like: .dialog { background: White; overflow: hidden; border: solid 1px steelblue; -moz-border-radius: 6px 6px 4px 4px; -webkit-border-radius: 6px 6px 4px 4px; border-radius: 6px 6px 3px 3px; } .dialog-header { background-image: url(images/dialogheader.png); background-repeat: repeat-x; text-align: left; color: cornsilk; padding: 5px; padding-left: 10px; font-size: 1.02em; font-weight: bold; position: relative; -moz-border-radius: 4px 4px 0px 0px; -webkit-border-radius: 4px 4px 0px 0px; border-radius: 4px 4px 0px 0px; } .dialog-top { -moz-border-radius: 4px 4px 0px 0px; -webkit-border-radius: 4px 4px 0px 0px; border-radius: 4px 4px 0px 0px; } .dialog-bottom { -moz-border-radius: 0 0 3px 3px; -webkit-border-radius: 0 0 3px 3px; border-radius: 0 0 3px 3px; } .dialog-content { padding: 15px; } .dialog-statusbar, .dialog-toolbar { background: #eeeeee; background-image: url(images/dialogstrip.png); background-repeat: repeat-x; padding: 5px; padding-left: 10px; border-top: solid 1px silver; border-bottom: solid 1px silver; font-size: 0.8em; } .dialog-statusbar { -moz-border-radius: 0 0 3px 3px; -webkit-border-radius: 0 0 3px 3px; border-radius: 0 0 3px 3px; padding-right: 10px; } .closebox { position: absolute; right: 2px; top: 2px; background-image: url(images/close.gif); background-repeat: no-repeat; width: 14px; height: 14px; cursor: pointer; opacity: 0.60; filter: alpha(opacity="80"); } .closebox:hover { opacity: 1; filter: alpha(opacity="100"); } The main style is the dialog class which is the outer box. It has the rounded border that serves as the outline. Note that I didn’t add the box-shadow to this style because in some situations I just want the rounded box in an inline display that doesn’t have a shadow so it’s still applied separately. dialog-header, then has the rounded top corners and displays a typical dialog heading format. dialog-bottom and dialog-top then provide the same functionality as roundbox-top and roundbox-bottom described earlier but are provided mainly in the stylesheet for consistency to match the dialog’s round edges and making it easier to  remember and find in Intellisense as it shows up in the same dialog- group. dialog-statusbar and dialog-toolbar are two elements I use a lot for floating windows – the toolbar serves for buttons and options and filters typically, while the status bar provides information specific to the floating window. Since the the status bar is always on the bottom of the dialog it automatically handles the rounding of the bottom corners. Finally there’s  closebox style which is to be applied to an empty <div> tag in the header typically. What this does is render a close image that is by default low-lighted with a low opacity value, and then highlights when hovered over. All you’d have to do handle the close operation is handle the onclick of the <div>. Note that the <div> right aligns so typically you should specify it before any other content in the header. Speaking of closable – some time ago I created a closable jQuery plug-in that basically automates this process and can be applied against ANY element in a page, automatically removing or closing the element with some simple script code. Using this you can leave out the <div> tag for closable and just do the following: To make the above dialog closable (and draggable) which makes it effectively and overlay window, you’d add jQuery.js and ww.jquery.js to the page: <script type="text/javascript" src="../../scripts/jquery.min.js"></script> <script type="text/javascript" src="../../scripts/ww.jquery.min.js"></script> and then simply call: <script type="text/javascript"> $(document).ready(function () { $("#divDialog") .draggable({ handle: ".dialog-header" }) .closable({ handle: ".dialog-header", closeHandler: function () { alert("Window about to be closed."); return true; // true closes - false leaves open } }); }); </script> * ww.jquery.js emulates base features in jQuery-ui’s draggable. If jQuery-ui is loaded its draggable version will be used instead and voila you have now have a draggable and closable window – here in mid-drag:   The dragging and closable behaviors are of course optional, but it’s the final touch that provides dialog like window behavior. Relief for older Internet Explorer Versions with CSS Pie If you want to get these features to work with older versions of Internet Explorer all the way back to version 6 you can check out CSS Pie. CSS Pie provides an Internet Explorer behavior file that attaches to specific CSS rules and simulates these behavior using script code in IE (mostly by implementing filters). You can simply add the behavior to each CSS style that uses box-shadow and border-radius like this: .boxshadow {     -moz-box-shadow: 3px 3px 5px #535353;     -webkit-box-shadow: 3px 3px 5px #535353;           box-shadow: 3px 3px 5px #535353;     behavior: url(scripts/PIE.htc);           } .roundbox {      -moz-border-radius: 6px 6px 6px 6px;     -webkit-border-radius: 6px;      border-radius: 6px 6px 6px 6px;     behavior: url(scripts/PIE.htc); } CSS Pie requires the PIE.htc on your server and referenced from each CSS style that needs it. Note that the url() for IE behaviors is NOT CSS file relative as other CSS resources, but rather PAGE relative , so if you have more than one folder you probably need to reference the HTC file with a fixed path like this: behavior: url(/MyApp/scripts/PIE.htc); in the style. Small price to pay, but a royal pain if you have a common CSS file you use in many applications. Once the PIE.htc file has been copied and you have applied the behavior to each style that uses these new features Internet Explorer will render rounded corners and box shadows! Yay! Hurray for box-shadow and border-radius All of this functionality is very welcome natively in the browser. If you think this is all frivolous visual candy, you might be right :-), but if you take a look on the Web and search for rounded corner solutions that predate these CSS attributes you’ll find a boatload of stuff from image files, to custom drawn content to Javascript solutions that play tricks with a few images. It’s sooooo much easier to have this functionality built in and I for one am glad to see that’s it’s finally becoming standard in the box. Still remember that when you use these new CSS features, they are not universal, and are not going to be really soon. Legacy browsers, especially old versions of Internet Explorer that can’t be updated will continue to be around and won’t work with this shiny new stuff. I say screw ‘em: Let them get a decent recent browser or see a degraded and ugly UI. We have the luxury with this functionality in that it doesn’t typically affect usability – it just doesn’t look as nice. Resources Download the Sample The sample includes the styles and images and sample page as well as ww.jquery.js for the draggable/closable example. Online Sample Check out the sample described in this post online. Closable and Draggable Documentation Documentation for the closeable and draggable plug-ins in ww.jquery.js. You can also check out the full documentation for all the plug-ins contained in ww.jquery.js here. © Rick Strahl, West Wind Technologies, 2005-2011Posted in HTML  CSS  

  Read the article

• Web Browser Control &ndash; Specifying the IE Version

  - by Rick Strahl

  I use the Internet Explorer Web Browser Control in a lot of my applications to display document type layout. HTML happens to be one of the most common document formats and displaying data in this format – even in desktop applications, is often way easier than using normal desktop technologies. One issue the Web Browser Control has that it’s perpetually stuck in IE 7 rendering mode by default. Even though IE 8 and now 9 have significantly upgraded the IE rendering engine to be more CSS and HTML compliant by default the Web Browser control will have none of it. IE 9 in particular – with its much improved CSS support and basic HTML 5 support is a big improvement and even though the IE control uses some of IE’s internal rendering technology it’s still stuck in the old IE 7 rendering by default. This applies whether you’re using the Web Browser control in a WPF application, a WinForms app, a FoxPro or VB classic application using the ActiveX control. Behind the scenes all these UI platforms use the COM interfaces and so you’re stuck by those same rules. Rendering Challenged To see what I’m talking about here are two screen shots rendering an HTML 5 doctype page that includes some CSS 3 functionality – rounded corners and border shadows - from an earlier post. One uses IE 9 as a standalone browser, and one uses a simple WPF form that includes the Web Browser control. IE 9 Browser:   Web Browser control in a WPF form: The IE 9 page displays this HTML correctly – you see the rounded corners and shadow displayed. Obviously the latter rendering using the Web Browser control in a WPF application is a bit lacking. Not only are the new CSS features missing but the page also renders in Internet Explorer’s quirks mode so all the margins, padding etc. behave differently by default, even though there’s a CSS reset applied on this page. If you’re building an application that intends to use the Web Browser control for a live preview of some HTML this is clearly undesirable. Feature Delegation via Registry Hacks Fortunately starting with Internet Explore 8 and later there’s a fix for this problem via a registry setting. You can specify a registry key to specify which rendering mode and version of IE should be used by that application. These are not global mind you – they have to be enabled for each application individually. There are two different sets of keys for 32 bit and 64 bit applications. 32 bit: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\MAIN\FeatureControl\FEATURE_BROWSER_EMULATION Value Key: yourapplication.exe 64 bit: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Internet Explorer\MAIN\FeatureControl\FEATURE_BROWSER_EMULATION Value Key: yourapplication.exe The value to set this key to is (taken from MSDN here) as decimal values: 9999 (0x270F) Internet Explorer 9. Webpages are displayed in IE9 Standards mode, regardless of the !DOCTYPE directive. 9000 (0x2328) Internet Explorer 9. Webpages containing standards-based !DOCTYPE directives are displayed in IE9 mode. 8888 (0x22B8) Webpages are displayed in IE8 Standards mode, regardless of the !DOCTYPE directive. 8000 (0x1F40) Webpages containing standards-based !DOCTYPE directives are displayed in IE8 mode. 7000 (0x1B58) Webpages containing standards-based !DOCTYPE directives are displayed in IE7 Standards mode.   The added key looks something like this in the Registry Editor: With this in place my Html Html Help Builder application which has wwhelp.exe as its main executable now works with HTML 5 and CSS 3 documents in the same way that Internet Explorer 9 does. Incidentally I accidentally added an ‘empty’ DWORD value of 0 to my EXE name and that worked as well giving me IE 9 rendering. Although not documented I suspect 0 (or an invalid value) will default to the installed browser. Don’t have a good way to test this but if somebody could try this with IE 8 installed that would be great: What happens when setting 9000 with IE 8 installed? What happens when setting 0 with IE 8 installed? Don’t forget to add Keys for Host Environments If you’re developing your application in Visual Studio and you run the debugger you may find that your application is still not rendering right, but if you run the actual generated EXE from Explorer or the OS command prompt it works. That’s because when you run the debugger in Visual Studio it wraps your application into a debugging host container. For this reason you might want to also add another registry key for yourapp.vshost.exe on your development machine. If you’re developing in Visual FoxPro make sure you add a key for vfp9.exe to see the rendering adjustments in the Visual FoxPro development environment. Cleaner HTML - no more HTML mangling! There are a number of additional benefits to setting up rendering of the Web Browser control to the IE 9 engine (or even the IE 8 engine) beyond the obvious rendering functionality. IE 9 actually returns your HTML in something that resembles the original HTML formatting, as opposed to the IE 7 default format which mangled the original HTML content. If you do the following in the WPF application: private void button2_Click(object sender, RoutedEventArgs e) { dynamic doc = this.webBrowser.Document; MessageBox.Show(doc.body.outerHtml); } you get different output depending on the rendering mode active. With the default IE 7 rendering you get: <BODY><DIV> <H1>Rounded Corners and Shadows - Creating Dialogs in CSS</H1> <DIV class=toolbarcontainer><A class=hoverbutton href="./"><IMG src="../../css/images/home.gif"> Home</A> <A class=hoverbutton href="RoundedCornersAndShadows.htm"><IMG src="../../css/images/refresh.gif"> Refresh</A> </DIV> <DIV class=containercontent> <FIELDSET><LEGEND>Plain Box</LEGEND><!-- Simple Box with rounded corners and shadow --> <DIV style="BORDER-BOTTOM: steelblue 2px solid; BORDER-LEFT: steelblue 2px solid; WIDTH: 550px; BORDER-TOP: steelblue 2px solid; BORDER-RIGHT: steelblue 2px solid" class="roundbox boxshadow"> <DIV style="BACKGROUND: khaki" class="boxcontenttext roundbox">Simple Rounded Corner Box. </DIV></DIV></FIELDSET> <FIELDSET><LEGEND>Box with Header</LEGEND> <DIV style="BORDER-BOTTOM: steelblue 2px solid; BORDER-LEFT: steelblue 2px solid; WIDTH: 550px; BORDER-TOP: steelblue 2px solid; BORDER-RIGHT: steelblue 2px solid" class="roundbox boxshadow"> <DIV class="gridheaderleft roundbox-top">Box with a Header</DIV> <DIV style="BACKGROUND: khaki" class="boxcontenttext roundbox-bottom">Simple Rounded Corner Box. </DIV></DIV></FIELDSET> <FIELDSET><LEGEND>Dialog Style Window</LEGEND> <DIV style="POSITION: relative; WIDTH: 450px" id=divDialog class="dialog boxshadow" jQuery16107208195684204002="2"> <DIV style="POSITION: relative" class=dialog-header> <DIV class=closebox></DIV>User Sign-in <DIV class=closebox jQuery16107208195684204002="3"></DIV></DIV> <DIV class=descriptionheader>This dialog is draggable and closable</DIV> <DIV class=dialog-content><LABEL>Username:</LABEL> <INPUT name=txtUsername value=" "> <LABEL>Password</LABEL> <INPUT name=txtPassword value=" "> <HR> <INPUT id=btnLogin value=Login type=button> </DIV> <DIV class=dialog-statusbar>Ready</DIV></DIV></FIELDSET> </DIV> <SCRIPT type=text/javascript>     $(document).ready(function () {         $("#divDialog")             .draggable({ handle: ".dialog-header" })             .closable({ handle: ".dialog-header",                 closeHandler: function () {                     alert("Window about to be closed.");                     return true;  // true closes - false leaves open                 }             });     }); </SCRIPT> </DIV></BODY> Now lest you think I’m out of my mind and create complete whacky HTML rooted in the last century, here’s the IE 9 rendering mode output which looks a heck of a lot cleaner and a lot closer to my original HTML of the page I’m accessing: <body> <div>         <h1>Rounded Corners and Shadows - Creating Dialogs in CSS</h1>     <div class="toolbarcontainer">         <a class="hoverbutton" href="./"> <img src="../../css/images/home.gif"> Home</a>         <a class="hoverbutton" href="RoundedCornersAndShadows.htm"> <img src="../../css/images/refresh.gif"> Refresh</a>     </div>         <div class="containercontent">     <fieldset>         <legend>Plain Box</legend>                <!-- Simple Box with rounded corners and shadow -->             <div style="border: 2px solid steelblue; width: 550px;" class="roundbox boxshadow">                              <div style="background: khaki;" class="boxcontenttext roundbox">                     Simple Rounded Corner Box.                 </div>             </div>     </fieldset>     <fieldset>         <legend>Box with Header</legend>         <div style="border: 2px solid steelblue; width: 550px;" class="roundbox boxshadow">                          <div class="gridheaderleft roundbox-top">Box with a Header</div>             <div style="background: khaki;" class="boxcontenttext roundbox-bottom">                 Simple Rounded Corner Box.             </div>         </div>     </fieldset>       <fieldset>         <legend>Dialog Style Window</legend>         <div style="width: 450px; position: relative;" id="divDialog" class="dialog boxshadow">             <div style="position: relative;" class="dialog-header">                 <div class="closebox"></div>                 User Sign-in             <div class="closebox"></div></div>             <div class="descriptionheader">This dialog is draggable and closable</div>                    <div class="dialog-content">                             <label>Username:</label>                 <input name="txtUsername" value=" " type="text">                 <label>Password</label>                 <input name="txtPassword" value=" " type="text">                                 <hr/>                                 <input id="btnLogin" value="Login" type="button">                        </div>             <div class="dialog-statusbar">Ready</div>         </div>     </fieldset>     </div> <script type="text/javascript">     $(document).ready(function () {         $("#divDialog")             .draggable({ handle: ".dialog-header" })             .closable({ handle: ".dialog-header",                 closeHandler: function () {                     alert("Window about to be closed.");                     return true;  // true closes - false leaves open                 }             });     }); </script>        </div> </body> IOW, in IE9 rendering mode IE9 is much closer (but not identical) to the original HTML from the page on the Web that we’re reading from. As a side note: Unfortunately, the browser feature emulation can't be applied against the Html Help (CHM) Engine in Windows which uses the Web Browser control (or COM interfaces anyway) to render Html Help content. I tried setting up hh.exe which is the help viewer, to use IE 9 rendering but a help file generated with CSS3 features will simply show in IE 7 mode. Bummer - this would have been a nice quick fix to allow help content served from CHM files to look better. HTML Editing leaves HTML formatting intact In the same vane, if you do any inline HTML editing in the control by setting content to be editable, IE 9’s control does a much more reasonable job of creating usable and somewhat valid HTML. It also leaves the original content alone other than the text your are editing or adding. No longer is the HTML output stripped of excess spaces and reformatted in IEs format. So if I do: private void button3_Click(object sender, RoutedEventArgs e) { dynamic doc = this.webBrowser.Document; doc.body.contentEditable = true; } and then make some changes to the document by typing into it using IE 9 mode, the document formatting stays intact and only the affected content is modified. The created HTML is reasonably clean (although it does lack proper XHTML formatting for things like <br/> <hr/>). This is very different from IE 7 mode which mangled the HTML as soon as the page was loaded into the control. Any editing you did stripped out all white space and lost all of your existing XHTML formatting. In IE 9 mode at least *most* of your original formatting stays intact. This is huge! In Html Help Builder I have supported HTML editing for a long time but the HTML mangling by the Web Browser control made it very difficult to edit the HTML later. Previously IE would mangle the HTML by stripping out spaces, upper casing all tags and converting many XHTML safe tags to its HTML 3 tags. Now IE leaves most of my document alone while editing, and creates cleaner and more compliant markup (with exception of self-closing elements like BR/HR). The end result is that I now have HTML editing in place that's much cleaner and actually capable of being manually edited. Caveats, Caveats, Caveats It wouldn't be Internet Explorer if there weren't some major compatibility issues involved in using this various browser version interaction. The biggest thing I ran into is that there are odd differences in some of the COM interfaces and what they return. I specifically ran into a problem with the document.selection.createRange() function which with IE 7 compatibility returns an expected text range object. When running in IE 8 or IE 9 mode however. I could not retrieve a valid text range with this code where loEdit is the WebBrowser control: loRange = loEdit.document.selection.CreateRange() The loRange object returned (here in FoxPro) had a length property of 0 but none of the other properties of the TextRange or TextRangeCollection objects were available. I figured this was due to some changed security settings but even after elevating the Intranet Security Zone and mucking with the other browser feature flags pertaining to security I had no luck. In the end I relented and used a JavaScript function in my editor document that returns a selection range object: function getselectionrange() { var range = document.selection.createRange(); return range; } and call that JavaScript function from my host applications code: *** Use a function in the document to get around HTML Editing issues loRange = loEdit.document.parentWindow.getselectionrange(.f.) and that does work correctly. This wasn't a big deal as I'm already loading a support script file into the editor page so all I had to do is add the function to this existing script file. You can find out more how to call script code in the Web Browser control from a host application in a previous post of mine. IE 8 and 9 also clamp down the security environment a little more than the default IE 7 control, so there may be other issues you run into. Other than the createRange() problem above I haven't seen anything else that is breaking in my code so far though and that's encouraging at least since it uses a lot of HTML document manipulation for the custom editor I've created (and would love to replace - any PROFESSIONAL alternatives anybody?) Registry Key Installation for your Application It’s important to remember that this registry setting is made per application, so most likely this is something you want to set up with your installer. Also remember that 32 and 64 bit settings require separate settings in the registry so if you’re creating your installer you most likely will want to set both keys in the registry preemptively for your application. I use Tarma Installer for all of my application installs and in Tarma I configure registry keys for both and set a flag to only install the latter key group in the 64 bit version: Because this setting is application specific you have to do this for every application you install unfortunately, but this also means that you can safely configure this setting in the registry because it is after only applied to your application. Another problem with install based installation is version detection. If IE 8 is installed I’d want 8000 for the value, if IE 9 is installed I want 9000. I can do this easily in code but in the installer this is much more difficult. I don’t have a good solution for this at the moment, but given that the app works with IE 7 mode now, IE 9 mode is just a bonus for the moment. If IE 9 is not installed and 9000 is used the default rendering will remain in use.   It sure would be nice if we could specify the IE rendering mode as a property, but I suspect the ActiveX container has to know before it loads what actual version to load up and once loaded can only load a single version of IE. This would account for this annoying application level configuration… Summary The registry feature emulation has been available for quite some time, but I just found out about it today and started experimenting around with it. I’m stoked to see that this is available as I’d pretty much given up in ever seeing any better rendering in the Web Browser control. Now at least my apps can take advantage of newer HTML features. Now if we could only get better HTML Editing support somehow <snicker>… ah can’t have everything.© Rick Strahl, West Wind Technologies, 2005-2011Posted in .NET  FoxPro  Windows  

  Read the article

• No sound after video card replaced (AMD Radeon HD 7770)

  - by Sean

  Issue: no sound System: Dual boot Windows 7 (sda) Ubuntu 12.04 (sdb) 2 harddrives Dell XPS 730 Video card: AMD Radeo HD 7770 Diamond Multimedia Sound card: Creative Labs SB X-Fi Additional info: My sound used to work. Then, my old video card (NVIDIA geforce 280) died. I bought and installed a new video card: Radeon HD 7770. After this, my sound no longer worked in ubuntu (Win7 audio still works). Everything else in ubuntu, such as video, works fine. I suspect it has something to do with the fact that the Radeon card includes sound capability. Problem Details: If I click on System Settings - Sound, the panel freezes and stops responding indefinitely. The sound volume icon at the top of the screen (by the clock) shows 3 dashes beside it "---", and an empty drop-down box shows if I click on it. (Possibly related to 1.) When I reboot my machine, I get the message: "gnome settings daemon not responding". I have to force the reboot. I reinstalled ubunbu (perserving my home directory) and the problem persists. Diagnostics info: Following procedure outlined here: https://help.ubuntu.com/community/SoundTroubleshooting The following is a list of terminal commands, and their output: $ aplay -l List of PLAYBACK Hardware Devices There is no listing beyond that, and the command freezes until I hit control-c $ lspci -v | grep -A7 -i "audio" 00:0f.1 Audio device: NVIDIA Corporation MCP55 High Definition Audio (rev a2) Subsystem: Dell Device 0224 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at dfff0000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel -- 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Device aab0 Subsystem: Diamond Multimedia Systems Device aab0 Flags: bus master, fast devsel, latency 0, IRQ 43 Memory at dfefc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel -- 03:0a.0 Audio device: Creative Labs SB X-Fi Subsystem: Creative Labs Device 6002 Flags: bus master, medium devsel, latency 32, IRQ 18 Memory at dbff4000 (32-bit, non-prefetchable) [size=16K] Memory at dbc00000 (64-bit, non-prefetchable) [size=2M] Memory at d4000000 (64-bit, non-prefetchable) [size=64M] I/O ports at 8c00 [size=32] Capabilities: <access denied> Notice the Diamond Multimedia Systems Device - that seems to be my video card sound. My video card is Diamond multimedia. Also there's the weird NVIDIA device in there. That must either be a remnant of my now removed NVIDIA graphics card, or else some kind of on-board thing. Not sure which. $ killall pulseaudio This allows me to open system settings - sound. But the "Test Sound" button makes no sound And the output volume + mute controls are greyed / disabled at 0 volume. It also allows me to click on the sound control in the "task bar" (beside the clock), and a volume slider drops down, but it is disabled / greyed at 0 volume. $ find /lib/modules/uname -r | grep snd /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-88pm860x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320aic3x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8900.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8978.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320dac33.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm9090.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-sta32x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-max98088.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-max9850.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-rt5631.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8903.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8580.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8523.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-max9877.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ads117x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8955.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8804.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-sgtl5000.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8750.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm2000.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320aic32x4.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4642.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ad193x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8753.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4535.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8985.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8350.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-dfbmcs320.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-cs42l51.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320aic26.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8737.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-uda1380.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8776.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8995.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tpa6130a2.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8727.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm5100.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8991.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8510.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-jz4740-codec.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8400.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-lm4857.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8960.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-alc5623.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-cs4270.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320aic23.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8993.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8961.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8940.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-uda134x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ad1836.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8994.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8782.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-cs4271.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8974.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8983.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8962.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4641.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm-hubs.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8971.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8996.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wl1273.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-adav80x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-spdif.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-pcm3008.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-cx20442.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4671.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8711.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ad73311.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-max98095.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm9081.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8741.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm1250-ev1.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8988.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-adau1373.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8731.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-l3.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ssm2602.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-da7210.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4104.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8904.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8728.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8770.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8990.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/snd-soc-core.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/synth/emux/snd-emux-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/synth/snd-util-mem.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-hrtimer.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-hwdep.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-pcm.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-rawmidi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/oss/snd-mixer-oss.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-page-alloc.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-midi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-dummy.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-virmidi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-device.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-midi-event.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-midi-emul.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-timer.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pcmcia/pdaudiocf/snd-pdaudiocf.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pcmcia/vx/snd-vxpocket.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/6fire/snd-usb-6fire.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/snd-usbmidi-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/caiaq/snd-usb-caiaq.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/usx2y/snd-usb-usx2y.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/usx2y/snd-usb-us122l.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/snd-usb-audio.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/misc/snd-ua101.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/opl3/snd-opl3-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/opl3/snd-opl3-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/opl4/snd-opl4-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/opl4/snd-opl4-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-portman2x4.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-serial-u16550.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-mts64.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-mtpav.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/mpu401/snd-mpu401.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/vx/snd-vx-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-dummy.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-aloop.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/pcsp/snd-pcsp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-virmidi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/firewire/snd-firewire-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/firewire/snd-firewire-speakers.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/firewire/snd-isight.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/snd-tea6330t.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-tea575x-tuner.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-ak4113.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-pt2258.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-ak4117.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-ak4xxx-adda.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-ak4114.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/snd-cs8427.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/snd-i2c.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/emu10k1/snd-emu10k1-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/emu10k1/snd-emu10k1.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/emu10k1/snd-emu10k1x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/korg1212/snd-korg1212.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/au88x0/snd-au8830.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/au88x0/snd-au8820.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/au88x0/snd-au8810.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/aw2/snd-aw2.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-sis7019.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-ens1371.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/vx222/snd-vx222.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-via82xx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-es1968.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-atiixp-modem.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-cs4281.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-sonicvibes.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-intel8x0.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-maestro3.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ac97/snd-ac97-codec.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-es1938.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-fm801.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/nm256/snd-nm256.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-realtek.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-cmedia.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-conexant.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-intel.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-analog.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-hdmi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-idt.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-ca0110.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-cirrus.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-via.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-ca0132.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-si3054.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/riptide/snd-riptide.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-ens1370.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-als4000.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-intel8x0m.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ca0106/snd-ca0106.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-cs5530.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/cs5535audio/snd-cs5535audio.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-rme32.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ymfpci/snd-ymfpci.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ctxfi/snd-ctxfi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-azt3328.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/cs46xx/snd-cs46xx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/lx6464es/snd-lx6464es.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ice1712/snd-ice1712.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ice1712/snd-ice17xx-ak4xxx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ice1712/snd-ice1724.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/mixart/snd-mixart.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ali5451/snd-ali5451.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/lola/snd-lola.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/oxygen/snd-oxygen-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/oxygen/snd-oxygen.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/oxygen/snd-virtuoso.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-via82xx-modem.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/pcxhr/snd-pcxhr.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigo.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-echo3g.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-mona.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-layla20.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-gina20.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-layla24.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-mia.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigoiox.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-darla24.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigoio.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigodjx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-gina24.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-darla20.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigodj.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-cmipci.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/asihpi/snd-asihpi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-ad1889.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/rme9652/snd-rme9652.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/rme9652/snd-hdspm.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/rme9652/snd-hdsp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/trident/snd-trident.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-atiixp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-als300.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-bt87x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-rme96.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/opti9xx/snd-miro.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/opti9xx/snd-opti92x-ad1848.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/opti9xx/snd-opti93x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/opti9xx/snd-opti92x-cs4231.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-gusextreme.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-interwave.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-gusmax.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-interwave-stb.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-gus-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-gusclassic.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-emu8000-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb16-dsp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sbawe.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb8-dsp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb-common.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb16.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb16-csp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb8.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-jazz16.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-es18xx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-azt2320.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-cmi8330.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-als100.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/msnd /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/msnd/snd-msnd-classic.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/msnd/snd-msnd-pinnacle.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/msnd/snd-msnd-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/cs423x/snd-cs4231.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/cs423x/snd-cs4236.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/es1688/snd-es1688-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/es1688/snd-es1688.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-adlib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/ad1848/snd-ad1848.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/ad1816a/snd-ad1816a.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/galaxy/snd-azt1605.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/galaxy/snd-azt2316.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/wavefront/snd-wavefront.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/wss/snd-wss-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-sc6000.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-sscape.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-opl3sa2.ko

  Read the article

• Silverlight for Windows Embedded tutorial (step 4)

  - by Valter Minute

  I’m back with my Silverlight for Windows Embedded tutorial. Sorry for the long delay between step 3 and step 4, the MVP summit and some work related issue prevented me from working on the tutorial during the last weeks. In our first,  second and third tutorial steps we implemented some very simple applications, just to understand the basic structure of a Silverlight for Windows Embedded application, learn how to handle events and how to operate on images. In this third step our sample application will be slightly more complicated, to introduce two new topics: list boxes and custom control. We will also learn how to create controls at runtime. I choose to explain those topics together and provide a sample a bit more complicated than usual just to start to give the feeling of how a “real” Silverlight for Windows Embedded application is organized. As usual we can start using Expression Blend to define our main page. In this case we will have a listbox and a textblock. Here’s the XAML code: <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" x:Class="ListDemo.Page" Width="640" Height="480" x:Name="ListPage" xmlns:ListDemo="clr-namespace:ListDemo">   <Grid x:Name="LayoutRoot" Background="White"> <ListBox Margin="19,57,19,66" x:Name="FileList" SelectionChanged="Filelist_SelectionChanged"/> <TextBlock Height="35" Margin="19,8,19,0" VerticalAlignment="Top" TextWrapping="Wrap" x:Name="CurrentDir" Text="TextBlock" FontSize="20"/> </Grid> </UserControl> In our listbox we will load a list of directories, starting from the filesystem root (there are no drives in Windows CE, the filesystem has a single root named “\”). When the user clicks on an item inside the list, the corresponding directory path will be displayed in the TextBlock object and the subdirectories of the selected branch will be shown inside the list. As you can see we declared an event handler for the SelectionChanged event of our listbox. We also used a different font size for the TextBlock, to make it more readable. XAML and Expression Blend allow you to customize your UI pretty heavily, experiment with the tools and discover how you can completely change the aspect of your application without changing a single line of code! Inside our ListBox we want to insert the directory presenting a nice icon and their name, just like you are used to see them inside Windows 7 file explorer, for example. To get this we will define a user control. This is a custom object that will behave like “regular” Silverlight for Windows Embedded objects inside our application. First of all we have to define the look of our custom control, named DirectoryItem, using XAML: <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" x:Class="ListDemo.DirectoryItem" Width="500" Height="80">   <StackPanel x:Name="LayoutRoot" Orientation="Horizontal"> <Canvas Width="31.6667" Height="45.9583" Margin="10,10,10,10" RenderTransformOrigin="0.5,0.5"> <Canvas.RenderTransform> <TransformGroup> <ScaleTransform/> <SkewTransform/> <RotateTransform Angle="-31.27"/> <TranslateTransform/> </TransformGroup> </Canvas.RenderTransform> <Rectangle Width="31.6667" Height="45.8414" Canvas.Left="0" Canvas.Top="0.116943" Stretch="Fill"> <Rectangle.Fill> <LinearGradientBrush StartPoint="0.142631,0.75344" EndPoint="1.01886,0.75344"> <LinearGradientBrush.RelativeTransform> <TransformGroup> <SkewTransform CenterX="0.142631" CenterY="0.75344" AngleX="19.3128" AngleY="0"/> <RotateTransform CenterX="0.142631" CenterY="0.75344" Angle="-35.3436"/> </TransformGroup> </LinearGradientBrush.RelativeTransform> <LinearGradientBrush.GradientStops> <GradientStop Color="#FF7B6802" Offset="0"/> <GradientStop Color="#FFF3D42C" Offset="1"/> </LinearGradientBrush.GradientStops> </LinearGradientBrush> </Rectangle.Fill> </Rectangle> <Rectangle Width="29.8441" Height="43.1517" Canvas.Left="0.569519" Canvas.Top="1.05249" Stretch="Fill"> <Rectangle.Fill> <LinearGradientBrush StartPoint="0.142632,0.753441" EndPoint="1.01886,0.753441"> <LinearGradientBrush.RelativeTransform> <TransformGroup> <SkewTransform CenterX="0.142632" CenterY="0.753441" AngleX="19.3127" AngleY="0"/> <RotateTransform CenterX="0.142632" CenterY="0.753441" Angle="-35.3437"/> </TransformGroup> </LinearGradientBrush.RelativeTransform> <LinearGradientBrush.GradientStops> <GradientStop Color="#FFCDCDCD" Offset="0.0833333"/> <GradientStop Color="#FFFFFFFF" Offset="1"/> </LinearGradientBrush.GradientStops> </LinearGradientBrush> </Rectangle.Fill> </Rectangle> <Rectangle Width="29.8441" Height="43.1517" Canvas.Left="0.455627" Canvas.Top="2.28036" Stretch="Fill"> <Rectangle.Fill> <LinearGradientBrush StartPoint="0.142631,0.75344" EndPoint="1.01886,0.75344"> <LinearGradientBrush.RelativeTransform> <TransformGroup> <SkewTransform CenterX="0.142631" CenterY="0.75344" AngleX="19.3128" AngleY="0"/> <RotateTransform CenterX="0.142631" CenterY="0.75344" Angle="-35.3436"/> </TransformGroup> </LinearGradientBrush.RelativeTransform> <LinearGradientBrush.GradientStops> <GradientStop Color="#FFCDCDCD" Offset="0.0833333"/> <GradientStop Color="#FFFFFFFF" Offset="1"/> </LinearGradientBrush.GradientStops> </LinearGradientBrush> </Rectangle.Fill> </Rectangle> <Rectangle Width="29.8441" Height="43.1517" Canvas.Left="0.455627" Canvas.Top="1.34485" Stretch="Fill"> <Rectangle.Fill> <LinearGradientBrush StartPoint="0.142631,0.75344" EndPoint="1.01886,0.75344"> <LinearGradientBrush.RelativeTransform> <TransformGroup> <SkewTransform CenterX="0.142631" CenterY="0.75344" AngleX="19.3128" AngleY="0"/> <RotateTransform CenterX="0.142631" CenterY="0.75344" Angle="-35.3436"/> </TransformGroup> </LinearGradientBrush.RelativeTransform> <LinearGradientBrush.GradientStops> <GradientStop Color="#FFCDCDCD" Offset="0.0833333"/> <GradientStop Color="#FFFFFFFF" Offset="1"/> </LinearGradientBrush.GradientStops> </LinearGradientBrush> </Rectangle.Fill> </Rectangle> <Rectangle Width="26.4269" Height="45.8414" Canvas.Left="0.227798" Canvas.Top="0" Stretch="Fill"> <Rectangle.Fill> <LinearGradientBrush StartPoint="0.142631,0.75344" EndPoint="1.01886,0.75344"> <LinearGradientBrush.RelativeTransform> <TransformGroup> <SkewTransform CenterX="0.142631" CenterY="0.75344" AngleX="19.3127" AngleY="0"/> <RotateTransform CenterX="0.142631" CenterY="0.75344" Angle="-35.3436"/> </TransformGroup> </LinearGradientBrush.RelativeTransform> <LinearGradientBrush.GradientStops> <GradientStop Color="#FF7B6802" Offset="0"/> <GradientStop Color="#FFF3D42C" Offset="1"/> </LinearGradientBrush.GradientStops> </LinearGradientBrush> </Rectangle.Fill> </Rectangle> <Rectangle Width="1.25301" Height="45.8414" Canvas.Left="1.70862" Canvas.Top="0.116943" Stretch="Fill" Fill="#FFEBFF07"/> </Canvas> <TextBlock Height="80" x:Name="Name" Width="448" TextWrapping="Wrap" VerticalAlignment="Center" FontSize="24" Text="Directory"/> </StackPanel> </UserControl> As you can see, this XAML contains many graphic elements. Those elements are used to design the folder icon. The original drawing has been designed in Expression Design and then exported as XAML. In Silverlight for Windows Embedded you can use vector images. This means that your images will look good even when scaled or rotated. In our DirectoryItem custom control we have a TextBlock named Name, that will be used to display….(suspense)…. the directory name (I’m too lazy to invent fancy names for controls, and using “boring” intuitive names will make code more readable, I hope!). Now that we have some XAML code, we may execute XAML2CPP to generate part of the aplication code for us. We should then add references to our XAML2CPP generated resource file and include in our code and add a reference to the XAML runtime library to our sources file (you can follow the instruction of the first tutorial step to do that), To generate the code used in this tutorial you need XAML2CPP ver 1.0.1.0, that is downloadable here: http://geekswithblogs.net/WindowsEmbeddedCookbook/archive/2010/03/08/xaml2cpp-1.0.1.0.aspx We can now create our usual simple Win32 application inside Platform Builder, using the same step described in the first chapter of this tutorial (http://geekswithblogs.net/WindowsEmbeddedCookbook/archive/2009/10/01/silverlight-for-embedded-tutorial.aspx). We can declare a class for our main page, deriving it from the template that XAML2CPP generated for us: class ListPage : public TListPage<ListPage> { ... } We will see the ListPage class code in a short time, but before we will see the code of our DirectoryItem user control. This object will be used to populate our list, one item for each directory. To declare a user control things are a bit more complicated (but also in this case XAML2CPP will write most of the “boilerplate” code for use. To interact with a user control you should declare an interface. An interface defines the functions of a user control that can be called inside the application code. Our custom control is currently quite simple and we just need some member functions to store and retrieve a full pathname inside our control. The control will display just the last part of the path inside the control. An interface is declared as a C++ class that has only abstract virtual members. It should also have an UUID associated with it. UUID means Universal Unique IDentifier and it’s a 128 bit number that will identify our interface without the need of specifying its fully qualified name. UUIDs are used to identify COM interfaces and, as we discovered in chapter one, Silverlight for Windows Embedded is based on COM or, at least, provides a COM-like Application Programming Interface (API). Here’s the declaration of the DirectoryItem interface: class __declspec(novtable,uuid("{D38C66E5-2725-4111-B422-D75B32AA8702}")) IDirectoryItem : public IXRCustomUserControl { public:   virtual HRESULT SetFullPath(BSTR fullpath) = 0; virtual HRESULT GetFullPath(BSTR* retval) = 0; }; The interface is derived from IXRCustomControl, this will allow us to add our object to a XAML tree. It declares the two functions needed to set and get the full path, but don’t implement them. Implementation will be done inside the control class. The interface only defines the functions of our control class that are accessible from the outside. It’s a sort of “contract” between our control and the applications that will use it. We must support what’s inside the contract and the application code should know nothing else about our own control. To reference our interface we will use the UUID, to make code more readable we can declare a #define in this way: #define IID_IDirectoryItem __uuidof(IDirectoryItem) Silverlight for Windows Embedded objects (like COM objects) use a reference counting mechanism to handle object destruction. Every time you store a pointer to an object you should call its AddRef function and every time you no longer need that pointer you should call Release. The object keeps an internal counter, incremented for each AddRef and decremented on Release. When the counter reaches 0, the object is destroyed. Managing reference counting in our code can be quite complicated and, since we are lazy (I am, at least!), we will use a great feature of Silverlight for Windows Embedded: smart pointers.A smart pointer can be connected to a Silverlight for Windows Embedded object and manages its reference counting. To declare a smart pointer we must use the XRPtr template: typedef XRPtr<IDirectoryItem> IDirectoryItemPtr; Now that we have defined our interface, it’s time to implement our user control class. XAML2CPP has implemented a class for us, and we have only to derive our class from it, defining the main class and interface of our new custom control: class DirectoryItem : public DirectoryItemUserControlRegister<DirectoryItem,IDirectoryItem> { ... } XAML2CPP has generated some code for us to support the user control, we don’t have to mind too much about that code, since it will be generated (or written by hand, if you like) always in the same way, for every user control. But knowing how does this works “under the hood” is still useful to understand the architecture of Silverlight for Windows Embedded. Our base class declaration is a bit more complex than the one we used for a simple page in the previous chapters: template <class A,class B> class DirectoryItemUserControlRegister : public XRCustomUserControlImpl<A,B>,public TDirectoryItem<A,XAML2CPPUserControl> { ... } This class derives from the XAML2CPP generated template class, like the ListPage class, but it uses XAML2CPPUserControl for the implementation of some features. This class shares the same ancestor of XAML2CPPPage (base class for “regular” XAML pages), XAML2CPPBase, implements binding of member variables and event handlers but, instead of loading and creating its own XAML tree, it attaches to an existing one. The XAML tree (and UI) of our custom control is created and loaded by the XRCustomUserControlImpl class. This class is part of the Silverlight for Windows Embedded framework and implements most of the functions needed to build-up a custom control in Silverlight (the guys that developed Silverlight for Windows Embedded seem to care about lazy programmers!). We have just to initialize it, providing our class (DirectoryItem) and interface (IDirectoryItem). Our user control class has also a static member: protected:   static HINSTANCE hInstance; This is used to store the HINSTANCE of the modules that contain our user control class. I don’t like this implementation, but I can’t find a better one, so if somebody has good ideas about how to handle the HINSTANCE object, I’ll be happy to hear suggestions! It also implements two static members required by XRCustomUserControlImpl. The first one is used to load the XAML UI of our custom control: static HRESULT GetXamlSource(XRXamlSource* pXamlSource) { pXamlSource->SetResource(hInstance,TEXT("XAML"),IDR_XAML_DirectoryItem); return S_OK; }   It initializes a XRXamlSource object, connecting it to the XAML resource that XAML2CPP has included in our resource script. The other method is used to register our custom control, allowing Silverlight for Windows Embedded to create it when it load some XAML or when an application creates a new control at runtime (more about this later): static HRESULT Register() { return XRCustomUserControlImpl<A,B>::Register(__uuidof(B), L"DirectoryItem", L"clr-namespace:DirectoryItemNamespace"); } To register our control we should provide its interface UUID, the name of the corresponding element in the XAML tree and its current namespace (namespaces compatible with Silverlight must use the “clr-namespace” prefix. We may also register additional properties for our objects, allowing them to be loaded and saved inside XAML. In this case we have no permanent properties and the Register method will just register our control. An additional static method is implemented to allow easy registration of our custom control inside our application WinMain function: static HRESULT RegisterUserControl(HINSTANCE hInstance) { DirectoryItemUserControlRegister::hInstance=hInstance; return DirectoryItemUserControlRegister<A,B>::Register(); } Now our control is registered and we will be able to create it using the Silverlight for Windows Embedded runtime functions. But we need to bind our members and event handlers to have them available like we are used to do for other XAML2CPP generated objects. To bind events and members we need to implement the On_Loaded function: virtual HRESULT OnLoaded(__in IXRDependencyObject* pRoot) { HRESULT retcode; IXRApplicationPtr app; if (FAILED(retcode=GetXRApplicationInstance(&app))) return retcode; return ((A*)this)->Init(pRoot,hInstance,app); } This function will call the XAML2CPPUserControl::Init member that will connect the “root” member with the XAML sub tree that has been created for our control and then calls BindObjects and BindEvents to bind members and events to our code. Now we can go back to our application code (the code that you’ll have to actually write) to see the contents of our DirectoryItem class: class DirectoryItem : public DirectoryItemUserControlRegister<DirectoryItem,IDirectoryItem> { protected:   WCHAR fullpath[_MAX_PATH+1];   public:   DirectoryItem() { *fullpath=0; }   virtual HRESULT SetFullPath(BSTR fullpath) { wcscpy_s(this->fullpath,fullpath);   WCHAR* p=fullpath;   for(WCHAR*q=wcsstr(p,L"\\");q;p=q+1,q=wcsstr(p,L"\\")) ;   Name->SetText(p); return S_OK; }   virtual HRESULT GetFullPath(BSTR* retval) { *retval=SysAllocString(fullpath); return S_OK; } }; It’s pretty easy and contains a fullpath member (used to store that path of the directory connected with the user control) and the implementation of the two interface members that can be used to set and retrieve the path. The SetFullPath member parses the full path and displays just the last branch directory name inside the “Name” TextBlock object. As you can see, implementing a user control in Silverlight for Windows Embedded is not too complex and using XAML also for the UI of the control allows us to re-use the same mechanisms that we learnt and used in the previous steps of our tutorial. Now let’s see how the main page is managed by the ListPage class. class ListPage : public TListPage<ListPage> { protected:   // current path TCHAR curpath[_MAX_PATH+1]; It has a member named “curpath” that is used to store the current directory. It’s initialized inside the constructor: ListPage() { *curpath=0; } And it’s value is displayed inside the “CurrentDir” TextBlock inside the initialization function: virtual HRESULT Init(HINSTANCE hInstance,IXRApplication* app) { HRESULT retcode;   if (FAILED(retcode=TListPage<ListPage>::Init(hInstance,app))) return retcode;   CurrentDir->SetText(L"\\"); return S_OK; } The FillFileList function is used to enumerate subdirectories of the current dir and add entries for each one inside the list box that fills most of the client area of our main page: HRESULT FillFileList() { HRESULT retcode; IXRItemCollectionPtr items; IXRApplicationPtr app;   if (FAILED(retcode=GetXRApplicationInstance(&app))) return retcode; // retrieves the items contained in the listbox if (FAILED(retcode=FileList->GetItems(&items))) return retcode;   // clears the list if (FAILED(retcode=items->Clear())) return retcode;   // enumerates files and directory in the current path WCHAR filemask[_MAX_PATH+1];   wcscpy_s(filemask,curpath); wcscat_s(filemask,L"\\*.*");   WIN32_FIND_DATA finddata; HANDLE findhandle;   findhandle=FindFirstFile(filemask,&finddata);   // the directory is empty? if (findhandle==INVALID_HANDLE_VALUE) return S_OK;   do { if (finddata.dwFileAttributes&=FILE_ATTRIBUTE_DIRECTORY) { IXRListBoxItemPtr listboxitem;   // add a new item to the listbox if (FAILED(retcode=app->CreateObject(IID_IXRListBoxItem,&listboxitem))) { FindClose(findhandle); return retcode; }   if (FAILED(retcode=items->Add(listboxitem,NULL))) { FindClose(findhandle); return retcode; }   IDirectoryItemPtr directoryitem;   if (FAILED(retcode=app->CreateObject(IID_IDirectoryItem,&directoryitem))) { FindClose(findhandle); return retcode; }   WCHAR fullpath[_MAX_PATH+1];   wcscpy_s(fullpath,curpath); wcscat_s(fullpath,L"\\"); wcscat_s(fullpath,finddata.cFileName);   if (FAILED(retcode=directoryitem->SetFullPath(fullpath))) { FindClose(findhandle); return retcode; }   XAML2CPPXRValue value((IXRDependencyObject*)directoryitem);   if (FAILED(retcode=listboxitem->SetContent(&value))) { FindClose(findhandle); return retcode; } } } while (FindNextFile(findhandle,&finddata));   FindClose(findhandle); return S_OK; } This functions retrieve a pointer to the collection of the items contained in the directory listbox. The IXRItemCollection interface is used by listboxes and comboboxes and allow you to clear the list (using Clear(), as our function does at the beginning) and change its contents by adding and removing elements. This function uses the FindFirstFile/FindNextFile functions to enumerate all the objects inside our current directory and for each subdirectory creates a IXRListBoxItem object. You can insert any kind of control inside a list box, you don’t need a IXRListBoxItem, but using it will allow you to handle the selected state of an item, highlighting it inside the list. The function creates a list box item using the CreateObject function of XRApplication. The same function is then used to create an instance of our custom control. The function returns a pointer to the control IDirectoryItem interface and we can use it to store the directory full path inside the object and add it as content of the IXRListBox item object, adding it to the listbox contents. The listbox generates an event (SelectionChanged) each time the user clicks on one of the items contained in the listbox. We implement an event handler for that event and use it to change our current directory and repopulate the listbox. The current directory full path will be displayed in the TextBlock: HRESULT Filelist_SelectionChanged(IXRDependencyObject* source,XRSelectionChangedEventArgs* args) { HRESULT retcode;   IXRListBoxItemPtr listboxitem;   if (!args->pAddedItem) return S_OK;   if (FAILED(retcode=args->pAddedItem->QueryInterface(IID_IXRListBoxItem,(void**)&listboxitem))) return retcode;   XRValue content; if (FAILED(retcode=listboxitem->GetContent(&content))) return retcode;   if (content.vType!=VTYPE_OBJECT) return E_FAIL;   IDirectoryItemPtr directoryitem;   if (FAILED(retcode=content.pObjectVal->QueryInterface(IID_IDirectoryItem,(void**)&directoryitem))) return retcode;   content.pObjectVal->Release(); content.pObjectVal=NULL;   BSTR fullpath=NULL;   if (FAILED(retcode=directoryitem->GetFullPath(&fullpath))) return retcode;   CurrentDir->SetText(fullpath);   wcscpy_s(curpath,fullpath); FillFileList(); SysFreeString(fullpath);     return S_OK; } }; The function uses the pAddedItem member of the XRSelectionChangedEventArgs object to retrieve the currently selected item, converts it to a IXRListBoxItem interface using QueryInterface, and then retrives its contents (IDirectoryItem object). Using the GetFullPath method we can get the full path of our selected directory and assing it to the curdir member. A call to FillFileList will update the listbox contents, displaying the list of subdirectories of the selected folder. To build our sample we just need to add code to our WinMain function: int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPTSTR lpCmdLine, int nCmdShow) { if (!XamlRuntimeInitialize()) return -1;   HRESULT retcode;   IXRApplicationPtr app; if (FAILED(retcode=GetXRApplicationInstance(&app))) return -1;   if (FAILED(retcode=DirectoryItem::RegisterUserControl(hInstance))) return retcode;   ListPage page;   if (FAILED(page.Init(hInstance,app))) return -1;   page.FillFileList();   UINT exitcode;   if (FAILED(page.GetVisualHost()->StartDialog(&exitcode))) return -1;   return 0; } This code is very similar to the one of the WinMains of our previous samples. The main differences are that we register our custom control (you should do that as soon as you have initialized the XAML runtime) and call FillFileList after the initialization of our ListPage object to load the contents of the root folder of our device inside the listbox. As usual you can download the full sample source code from here: http://cid-9b7b0aefe3514dc5.skydrive.live.com/self.aspx/.Public/ListBoxTest.zip

  Read the article

• What&rsquo;s New in ASP.NET 4.0 Part Two: WebForms and Visual Studio Enhancements

  - by Rick Strahl

  In the last installment I talked about the core changes in the ASP.NET runtime that I’ve been taking advantage of. In this column, I’ll cover the changes to the Web Forms engine and some of the cool improvements in Visual Studio that make Web and general development easier. WebForms The WebForms engine is the area that has received most significant changes in ASP.NET 4.0. Probably the most widely anticipated features are related to managing page client ids and of ViewState on WebForm pages. Take Control of Your ClientIDs Unique ClientID generation in ASP.NET has been one of the most complained about “features” in ASP.NET. Although there’s a very good technical reason for these unique generated ids - they guarantee unique ids for each and every server control on a page - these unique and generated ids often get in the way of client-side JavaScript development and CSS styling as it’s often inconvenient and fragile to work with the long, generated ClientIDs. In ASP.NET 4.0 you can now specify an explicit client id mode on each control or each naming container parent control to control how client ids are generated. By default, ASP.NET generates mangled client ids for any control contained in a naming container (like a Master Page, or a User Control for example). The key to ClientID management in ASP.NET 4.0 are the new ClientIDMode and ClientIDRowSuffix properties. ClientIDMode supports four different ClientID generation settings shown below. For the following examples, imagine that you have a Textbox control named txtName inside of a master page control container on a WebForms page. <%@Page Language="C#"      MasterPageFile="~/Site.Master"     CodeBehind="WebForm2.aspx.cs"     Inherits="WebApplication1.WebForm2"  %> <asp:Content ID="content"  ContentPlaceHolderID="content"               runat="server"               ClientIDMode="Static" >       <asp:TextBox runat="server" ID="txtName" /> </asp:Content> The four available ClientIDMode values are: AutoID This is the existing behavior in ASP.NET 1.x-3.x where full naming container munging takes place. <input name="ctl00$content$txtName" type="text"        id="ctl00_content_txtName" /> This should be familiar to any ASP.NET developer and results in fairly unpredictable client ids that can easily change if the containership hierarchy changes. For example, removing the master page changes the name in this case, so if you were to move a block of script code that works against the control to a non-Master page, the script code immediately breaks. Static This option is the most deterministic setting that forces the control’s ClientID to use its ID value directly. No naming container naming at all is applied and you end up with clean client ids: <input name="ctl00$content$txtName"         type="text" id="txtName" /> Note that the name property which is used for postback variables to the server still is munged, but the ClientID property is displayed simply as the ID value that you have assigned to the control. This option is what most of us want to use, but you have to be clear on that because it can potentially cause conflicts with other controls on the page. If there are several instances of the same naming container (several instances of the same user control for example) there can easily be a client id naming conflict. Note that if you assign Static to a data-bound control, like a list child control in templates, you do not get unique ids either, so for list controls where you rely on unique id for child controls, you’ll probably want to use Predictable rather than Static. I’ll write more on this a little later when I discuss ClientIDRowSuffix. Predictable The previous two values are pretty self-explanatory. Predictable however, requires some explanation. To me at least it’s not in the least bit predictable. MSDN defines this value as follows: This algorithm is used for controls that are in data-bound controls. The ClientID value is generated by concatenating the ClientID value of the parent naming container with the ID value of the control. If the control is a data-bound control that generates multiple rows, the value of the data field specified in the ClientIDRowSuffix property is added at the end. For the GridView control, multiple data fields can be specified. If the ClientIDRowSuffix property is blank, a sequential number is added at the end instead of a data-field value. Each segment is separated by an underscore character (_). The key that makes this value a bit confusing is that it relies on the parent NamingContainer’s ClientID to build its own ClientID value. This effectively means that the value is not predictable at all but rather very tightly coupled to the parent naming container’s ClientIDMode setting. For my simple textbox example, if the ClientIDMode property of the parent naming container (Page in this case) is set to “Predictable” you’ll get this: <input name="ctl00$content$txtName" type="text"         id="content_txtName" /> which gives an id that based on walking up to the currently active naming container (the MasterPage content container) and starting the id formatting from there downward. Think of this as a semi unique name that’s guaranteed unique only for the naming container. If, on the other hand, the Page is set to “AutoID” you get the following with Predictable on txtName: <input name="ctl00$content$txtName" type="text"         id="ctl00_content_txtName" /> The latter is effectively the same as if you specified AutoID because it inherits the AutoID naming from the Page and Content Master Page control of the page. But again - predictable behavior always depends on the parent naming container and how it generates its id, so the id may not always be exactly the same as the AutoID generated value because somewhere in the NamingContainer chain the ClientIDMode setting may be set to a different value. For example, if you had another naming container in the middle that was set to Static you’d end up effectively with an id that starts with the NamingContainers id rather than the whole ctl000_content munging. The most common use for Predictable is likely to be for data-bound controls, which results in each data bound item getting a unique ClientID. Unfortunately, even here the behavior can be very unpredictable depending on which data-bound control you use - I found significant differences in how template controls in a GridView behave from those that are used in a ListView control. For example, GridView creates clean child ClientIDs, while ListView still has a naming container in the ClientID, presumably because of the template container on which you can’t set ClientIDMode. Predictable is useful, but only if all naming containers down the chain use this setting. Otherwise you’re right back to the munged ids that are pretty unpredictable. Another property, ClientIDRowSuffix, can be used in combination with ClientIDMode of Predictable to force a suffix onto list client controls. For example: <asp:GridView runat="server" ID="gvItems"              AutoGenerateColumns="false"             ClientIDMode="Static"              ClientIDRowSuffix="Id">     <Columns>     <asp:TemplateField>         <ItemTemplate>             <asp:Label runat="server" id="txtName"                        Text='<%# Eval("Name") %>'                   ClientIDMode="Predictable"/>         </ItemTemplate>     </asp:TemplateField>     <asp:TemplateField>         <ItemTemplate>         <asp:Label runat="server" id="txtId"                     Text='<%# Eval("Id") %>'                     ClientIDMode="Predictable" />         </ItemTemplate>     </asp:TemplateField>     </Columns>  </asp:GridView> generates client Ids inside of a column in the master page described earlier: <td>     <span id="txtName_0">Rick</span> </td> where the value after the underscore is the ClientIDRowSuffix field - in this case “Id” of the item data bound to the control. Note that all of the child controls require ClientIDMode=”Predictable” in order for the ClientIDRowSuffix to be applied, and the parent GridView controls need to be set to Static either explicitly or via Naming Container inheritance to give these simple names. It’s a bummer that ClientIDRowSuffix doesn’t work with Static to produce this automatically. Another real problem is that other controls process the ClientIDMode differently. For example, a ListView control processes the Predictable ClientIDMode differently and produces the following with the Static ListView and Predictable child controls: <span id="ctrl0_txtName_0">Rick</span> I couldn’t even figure out a way using ClientIDMode to get a simple ID that also uses a suffix short of falling back to manually generated ids using <%= %> expressions instead. Given the inconsistencies inside of list controls using <%= %>, ids for the ListView might not be a bad idea anyway. Inherit The final setting is Inherit, which is the default for all controls except Page. This means that controls by default inherit the parent naming container’s ClientIDMode setting. For more detailed information on ClientID behavior and different scenarios you can check out a blog post of mine on this subject: http://www.west-wind.com/weblog/posts/54760.aspx. ClientID Enhancements Summary The ClientIDMode property is a welcome addition to ASP.NET 4.0. To me this is probably the most useful WebForms feature as it allows me to generate clean IDs simply by setting ClientIDMode="Static" on either the page or inside of Web.config (in the Pages section) which applies the setting down to the entire page which is my 95% scenario. For the few cases when it matters - for list controls and inside of multi-use user controls or custom server controls) - I can use Predictable or even AutoID to force controls to unique names. For application-level page development, this is easy to accomplish and provides maximum usability for working with client script code against page controls. ViewStateMode Another area of large criticism for WebForms is ViewState. ViewState is used internally by ASP.NET to persist page-level changes to non-postback properties on controls as pages post back to the server. It’s a useful mechanism that works great for the overall mechanics of WebForms, but it can also cause all sorts of overhead for page operation as ViewState can very quickly get out of control and consume huge amounts of bandwidth in your page content. ViewState can also wreak havoc with client-side scripting applications that modify control properties that are tracked by ViewState, which can produce very unpredictable results on a Postback after client-side updates. Over the years in my own development, I’ve often turned off ViewState on pages to reduce overhead. Yes, you lose some functionality, but you can easily implement most of the common functionality in non-ViewState workarounds. Relying less on heavy ViewState controls and sticking with simpler controls or raw HTML constructs avoids getting around ViewState problems. In ASP.NET 3.x and prior, it wasn’t easy to control ViewState - you could turn it on or off and if you turned it off at the page or web.config level, you couldn’t turn it back on for specific controls. In short, it was an all or nothing approach. With ASP.NET 4.0, the new ViewStateMode property gives you more control. It allows you to disable ViewState globally either on the page or web.config level and then turn it back on for specific controls that might need it. ViewStateMode only works when EnableViewState="true" on the page or web.config level (which is the default). You can then use ViewStateMode of Disabled, Enabled or Inherit to control the ViewState settings on the page. If you’re shooting for minimal ViewState usage, the ideal situation is to set ViewStateMode to disabled on the Page or web.config level and only turn it back on particular controls: <%@Page Language="C#"      CodeBehind="WebForm2.aspx.cs"     Inherits="Westwind.WebStore.WebForm2"        ClientIDMode="Static"                ViewStateMode="Disabled"     EnableViewState="true"  %> <!-- this control has viewstate  --> <asp:TextBox runat="server" ID="txtName"  ViewStateMode="Enabled" />       <!-- this control has no viewstate - it inherits  from parent container --> <asp:TextBox runat="server" ID="txtAddress" /> Note that the EnableViewState="true" at the Page level isn’t required since it’s the default, but it’s important that the value is true. ViewStateMode has no effect if EnableViewState="false" at the page level. The main benefit of ViewStateMode is that it allows you to more easily turn off ViewState for most of the page and enable only a few key controls that might need it. For me personally, this is a perfect combination as most of my WebForm apps can get away without any ViewState at all. But some controls - especially third party controls - often don’t work well without ViewState enabled, and now it’s much easier to selectively enable controls rather than the old way, which required you to pretty much turn off ViewState for all controls that you didn’t want ViewState on. Inline HTML Encoding HTML encoding is an important feature to prevent cross-site scripting attacks in data entered by users on your site. In order to make it easier to create HTML encoded content, ASP.NET 4.0 introduces a new Expression syntax using <%: %> to encode string values. The encoding expression syntax looks like this: <%: "<script type='text/javascript'>" +     "alert('Really?');</script>" %> which produces properly encoded HTML: &lt;script type=&#39;text/javascript&#39; &gt;alert(&#39;Really?&#39;);&lt;/script&gt; Effectively this is a shortcut to: <%= HttpUtility.HtmlEncode( "<script type='text/javascript'>" + "alert('Really?');</script>") %> Of course the <%: %> syntax can also evaluate expressions just like <%= %> so the more common scenario applies this expression syntax against data your application is displaying. Here’s an example displaying some data model values: <%: Model.Address.Street %> This snippet shows displaying data from your application’s data store or more importantly, from data entered by users. Anything that makes it easier and less verbose to HtmlEncode text is a welcome addition to avoid potential cross-site scripting attacks. Although I listed Inline HTML Encoding here under WebForms, anything that uses the WebForms rendering engine including ASP.NET MVC, benefits from this feature. ScriptManager Enhancements The ASP.NET ScriptManager control in the past has introduced some nice ways to take programmatic and markup control over script loading, but there were a number of shortcomings in this control. The ASP.NET 4.0 ScriptManager has a number of improvements that make it easier to control script loading and addresses a few of the shortcomings that have often kept me from using the control in favor of manual script loading. The first is the AjaxFrameworkMode property which finally lets you suppress loading the ASP.NET AJAX runtime. Disabled doesn’t load any ASP.NET AJAX libraries, but there’s also an Explicit mode that lets you pick and choose the library pieces individually and reduce the footprint of ASP.NET AJAX script included if you are using the library. There’s also a new EnableCdn property that forces any script that has a new WebResource attribute CdnPath property set to a CDN supplied URL. If the script has this Attribute property set to a non-null/empty value and EnableCdn is enabled on the ScriptManager, that script will be served from the specified CdnPath. [assembly: WebResource(    "Westwind.Web.Resources.ww.jquery.js",    "application/x-javascript",    CdnPath =  "http://mysite.com/scripts/ww.jquery.min.js")] Cool, but a little too static for my taste since this value can’t be changed at runtime to point at a debug script as needed, for example. Assembly names for loading scripts from resources can now be simple names rather than fully qualified assembly names, which make it less verbose to reference scripts from assemblies loaded from your bin folder or the assembly reference area in web.config: <asp:ScriptManager runat="server" id="Id"          EnableCdn="true"         AjaxFrameworkMode="disabled">     <Scripts>         <asp:ScriptReference          Name="Westwind.Web.Resources.ww.jquery.js"         Assembly="Westwind.Web" />     </Scripts>        </asp:ScriptManager> The ScriptManager in 4.0 also supports script combining via the CompositeScript tag, which allows you to very easily combine scripts into a single script resource served via ASP.NET. Even nicer: You can specify the URL that the combined script is served with. Check out the following script manager markup that combines several static file scripts and a script resource into a single ASP.NET served resource from a static URL (allscripts.js): <asp:ScriptManager runat="server" id="Id"          EnableCdn="true"         AjaxFrameworkMode="disabled">     <CompositeScript          Path="~/scripts/allscripts.js">         <Scripts>             <asp:ScriptReference                    Path="~/scripts/jquery.js" />             <asp:ScriptReference                    Path="~/scripts/ww.jquery.js" />             <asp:ScriptReference            Name="Westwind.Web.Resources.editors.js"                 Assembly="Westwind.Web" />         </Scripts>     </CompositeScript> </asp:ScriptManager> When you render this into HTML, you’ll see a single script reference in the page: <script src="scripts/allscripts.debug.js"          type="text/javascript"></script> All you need to do to make this work is ensure that allscripts.js and allscripts.debug.js exist in the scripts folder of your application - they can be empty but the file has to be there. This is pretty cool, but you want to be real careful that you use unique URLs for each combination of scripts you combine or else browser and server caching will easily screw you up royally. The script manager also allows you to override native ASP.NET AJAX scripts now as any script references defined in the Scripts section of the ScriptManager trump internal references. So if you want custom behavior or you want to fix a possible bug in the core libraries that normally are loaded from resources, you can now do this simply by referencing the script resource name in the Name property and pointing at System.Web for the assembly. Not a common scenario, but when you need it, it can come in real handy. Still, there are a number of shortcomings in this control. For one, the ScriptManager and ClientScript APIs still have no common entry point so control developers are still faced with having to check and support both APIs to load scripts so that controls can work on pages that do or don’t have a ScriptManager on the page. The CdnUrl is static and compiled in, which is very restrictive. And finally, there’s still no control over where scripts get loaded on the page - ScriptManager still injects scripts into the middle of the HTML markup rather than in the header or optionally the footer. This, in turn, means there is little control over script loading order, which can be problematic for control developers. MetaDescription, MetaKeywords Page Properties There are also a number of additional Page properties that correspond to some of the other features discussed in this column: ClientIDMode, ClientTarget and ViewStateMode. Another minor but useful feature is that you can now directly access the MetaDescription and MetaKeywords properties on the Page object to set the corresponding meta tags programmatically. Updating these values programmatically previously required either <%= %> expressions in the page markup or dynamic insertion of literal controls into the page. You can now just set these properties programmatically on the Page object in any Control derived class on the page or the Page itself: Page.MetaKeywords = "ASP.NET,4.0,New Features"; Page.MetaDescription = "This article discusses the new features in ASP.NET 4.0"; Note, that there’s no corresponding ASP.NET tag for the HTML Meta element, so the only way to specify these values in markup and access them is via the @Page tag: <%@Page Language="C#"      CodeBehind="WebForm2.aspx.cs"     Inherits="Westwind.WebStore.WebForm2"      ClientIDMode="Static"                MetaDescription="Article that discusses what's                      new in ASP.NET 4.0"     MetaKeywords="ASP.NET,4.0,New Features" %> Nothing earth shattering but quite convenient. Visual Studio 2010 Enhancements for Web Development For Web development there are also a host of editor enhancements in Visual Studio 2010. Some of these are not Web specific but they are useful for Web developers in general. Text Editors Throughout Visual Studio 2010, the text editors have all been updated to a new core engine based on WPF which provides some interesting new features for various code editors including the nice ability to zoom in and out with Ctrl-MouseWheel to quickly change the size of text. There are many more API options to control the editor and although Visual Studio 2010 doesn’t yet use many of these features, we can look forward to enhancements in add-ins and future editor updates from the various language teams that take advantage of the visual richness that WPF provides to editing. On the negative side, I’ve noticed that occasionally the code editor and especially the HTML and JavaScript editors will lose the ability to use various navigation keys like arrows, back and delete keys, which requires closing and reopening the documents at times. This issue seems to be well documented so I suspect this will be addressed soon with a hotfix or within the first service pack. Overall though, the code editors work very well, especially given that they were re-written completely using WPF, which was one of my big worries when I first heard about the complete redesign of the editors. Multi-Targeting Visual Studio now targets all versions of the .NET framework from 2.0 forward. You can use Visual Studio 2010 to work on your ASP.NET 2, 3.0 and 3.5 applications which is a nice way to get your feet wet with the new development environment without having to make changes to existing applications. It’s nice to have one tool to work in for all the different versions. Multi-Monitor Support One cool feature of Visual Studio 2010 is the ability to drag windows out of the Visual Studio environment and out onto the desktop including onto another monitor easily. Since Web development often involves working with a host of designers at the same time - visual designer, HTML markup window, code behind and JavaScript editor - it’s really nice to be able to have a little more screen real estate to work on each of these editors. Microsoft made a welcome change in the environment. IntelliSense Snippets for HTML and JavaScript Editors The HTML and JavaScript editors now finally support IntelliSense scripts to create macro-based template expansions that have been in the core C# and Visual Basic code editors since Visual Studio 2005. Snippets allow you to create short XML-based template definitions that can act as static macros or real templates that can have replaceable values that can be embedded into the expanded text. The XML syntax for these snippets is straight forward and it’s pretty easy to create custom snippets manually. You can easily create snippets using XML and store them in your custom snippets folder (C:\Users\rstrahl\Documents\Visual Studio 2010\Code Snippets\Visual Web Developer\My HTML Snippets and My JScript Snippets), but it helps to use one of the third-party tools that exist to simplify the process for you. I use SnippetEditor, by Bill McCarthy, which makes short work of creating snippets interactively (http://snippeteditor.codeplex.com/). Note: You may have to manually add the Visual Studio 2010 User specific Snippet folders to this tool to see existing ones you’ve created. Code snippets are some of the biggest time savers and HTML editing more than anything deals with lots of repetitive tasks that lend themselves to text expansion. Visual Studio 2010 includes a slew of built-in snippets (that you can also customize!) and you can create your own very easily. If you haven’t done so already, I encourage you to spend a little time examining your coding patterns and find the repetitive code that you write and convert it into snippets. I’ve been using CodeRush for this for years, but now you can do much of the basic expansion natively for HTML and JavaScript snippets. jQuery Integration Is Now Native jQuery is a popular JavaScript library and recently Microsoft has recently stated that it will become the primary client-side scripting technology to drive higher level script functionality in various ASP.NET Web projects that Microsoft provides. In Visual Studio 2010, the default full project template includes jQuery as part of a new project including the support files that provide IntelliSense (-vsdoc files). IntelliSense support for jQuery is now also baked into Visual Studio 2010, so unlike Visual Studio 2008 which required a separate download, no further installs are required for a rich IntelliSense experience with jQuery. Summary ASP.NET 4.0 brings many useful improvements to the platform, but thankfully most of the changes are incremental changes that don’t compromise backwards compatibility and they allow developers to ease into the new features one feature at a time. None of the changes in ASP.NET 4.0 or Visual Studio 2010 are monumental or game changers. The bigger features are language and .NET Framework changes that are also optional. This ASP.NET and tools release feels more like fine tuning and getting some long-standing kinks worked out of the platform. It shows that the ASP.NET team is dedicated to paying attention to community feedback and responding with changes to the platform and development environment based on this feedback. If you haven’t gotten your feet wet with ASP.NET 4.0 and Visual Studio 2010, there’s no reason not to give it a shot now - the ASP.NET 4.0 platform is solid and Visual Studio 2010 works very well for a brand new release. Check it out. © Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET  

  Read the article

• How to find and fix performance problems in ORM powered applications

  - by FransBouma

  Once in a while we get requests about how to fix performance problems with our framework. As it comes down to following the same steps and looking into the same things every single time, I decided to write a blogpost about it instead, so more people can learn from this and solve performance problems in their O/R mapper powered applications. In some parts it's focused on LLBLGen Pro but it's also usable for other O/R mapping frameworks, as the vast majority of performance problems in O/R mapper powered applications are not specific for a certain O/R mapper framework. Too often, the developer looks at the wrong part of the application, trying to fix what isn't a problem in that part, and getting frustrated that 'things are so slow with <insert your favorite framework X here>'. I'm in the O/R mapper business for a long time now (almost 10 years, full time) and as it's a small world, we O/R mapper developers know almost all tricks to pull off by now: we all know what to do to make task ABC faster and what compromises (because there are almost always compromises) to deal with if we decide to make ABC faster that way. Some O/R mapper frameworks are faster in X, others in Y, but you can be sure the difference is mainly a result of a compromise some developers are willing to deal with and others aren't. That's why the O/R mapper frameworks on the market today are different in many ways, even though they all fetch and save entities from and to a database. I'm not suggesting there's no room for improvement in today's O/R mapper frameworks, there always is, but it's not a matter of 'the slowness of the application is caused by the O/R mapper' anymore. Perhaps query generation can be optimized a bit here, row materialization can be optimized a bit there, but it's mainly coming down to milliseconds. Still worth it if you're a framework developer, but it's not much compared to the time spend inside databases and in user code: if a complete fetch takes 40ms or 50ms (from call to entity object collection), it won't make a difference for your application as that 10ms difference won't be noticed. That's why it's very important to find the real locations of the problems so developers can fix them properly and don't get frustrated because their quest to get a fast, performing application failed. Performance tuning basics and rules Finding and fixing performance problems in any application is a strict procedure with four prescribed steps: isolate, analyze, interpret and fix, in that order. It's key that you don't skip a step nor make assumptions: these steps help you find the reason of a problem which seems to be there, and how to fix it or leave it as-is. Skipping a step, or when you assume things will be bad/slow without doing analysis will lead to the path of premature optimization and won't actually solve your problems, only create new ones. The most important rule of finding and fixing performance problems in software is that you have to understand what 'performance problem' actually means. Most developers will say "when a piece of software / code is slow, you have a performance problem". But is that actually the case? If I write a Linq query which will aggregate, group and sort 5 million rows from several tables to produce a resultset of 10 rows, it might take more than a couple of milliseconds before that resultset is ready to be consumed by other logic. If I solely look at the Linq query, the code consuming the resultset of the 10 rows and then look at the time it takes to complete the whole procedure, it will appear to me to be slow: all that time taken to produce and consume 10 rows? But if you look closer, if you analyze and interpret the situation, you'll see it does a tremendous amount of work, and in that light it might even be extremely fast. With every performance problem you encounter, always do realize that what you're trying to solve is perhaps not a technical problem at all, but a perception problem. The second most important rule you have to understand is based on the old saying "Penny wise, Pound Foolish": the part which takes e.g. 5% of the total time T for a given task isn't worth optimizing if you have another part which takes a much larger part of the total time T for that same given task. Optimizing parts which are relatively insignificant for the total time taken is not going to bring you better results overall, even if you totally optimize that part away. This is the core reason why analysis of the complete set of application parts which participate in a given task is key to being successful in solving performance problems: No analysis -> no problem -> no solution. One warning up front: hunting for performance will always include making compromises. Fast software can be made maintainable, but if you want to squeeze as much performance out of your software, you will inevitably be faced with the dilemma of compromising one or more from the group {readability, maintainability, features} for the extra performance you think you'll gain. It's then up to you to decide whether it's worth it. In almost all cases it's not. The reason for this is simple: the vast majority of performance problems can be solved by implementing the proper algorithms, the ones with proven Big O-characteristics so you know the performance you'll get plus you know the algorithm will work. The time taken by the algorithm implementing code is inevitable: you already implemented the best algorithm. You might find some optimizations on the technical level but in general these are minor. Let's look at the four steps to see how they guide us through the quest to find and fix performance problems. Isolate The first thing you need to do is to isolate the areas in your application which are assumed to be slow. For example, if your application is a web application and a given page is taking several seconds or even minutes to load, it's a good candidate to check out. It's important to start with the isolate step because it allows you to focus on a single code path per area with a clear begin and end and ignore the rest. The rest of the steps are taken per identified problematic area. Keep in mind that isolation focuses on tasks in an application, not code snippets. A task is something that's started in your application by either another task or the user, or another program, and has a beginning and an end. You can see a task as a piece of functionality offered by your application.  Analyze Once you've determined the problem areas, you have to perform analysis on the code paths of each area, to see where the performance problems occur and which areas are not the problem. This is a multi-layered effort: an application which uses an O/R mapper typically consists of multiple parts: there's likely some kind of interface (web, webservice, windows etc.), a part which controls the interface and business logic, the O/R mapper part and the RDBMS, all connected with either a network or inter-process connections provided by the OS or other means. Each of these parts, including the connectivity plumbing, eat up a part of the total time it takes to complete a task, e.g. load a webpage with all orders of a given customer X. To understand which parts participate in the task / area we're investigating and how much they contribute to the total time taken to complete the task, analysis of each participating task is essential. Start with the code you wrote which starts the task, analyze the code and track the path it follows through your application. What does the code do along the way, verify whether it's correct or not. Analyze whether you have implemented the right algorithms in your code for this particular area. Remember we're looking at one area at a time, which means we're ignoring all other code paths, just the code path of the current problematic area, from begin to end and back. Don't dig in and start optimizing at the code level just yet. We're just analyzing. If your analysis reveals big architectural stupidity, it's perhaps a good idea to rethink the architecture at this point. For the rest, we're analyzing which means we collect data about what could be wrong, for each participating part of the complete application. Reviewing the code you wrote is a good tool to get deeper understanding of what is going on for a given task but ultimately it lacks precision and overview what really happens: humans aren't good code interpreters, computers are. We therefore need to utilize tools to get deeper understanding about which parts contribute how much time to the total task, triggered by which other parts and for example how many times are they called. There are two different kind of tools which are necessary: .NET profilers and O/R mapper / RDBMS profilers. .NET profiling .NET profilers (e.g. dotTrace by JetBrains or Ants by Red Gate software) show exactly which pieces of code are called, how many times they're called, and the time it took to run that piece of code, at the method level and sometimes even at the line level. The .NET profilers are essential tools for understanding whether the time taken to complete a given task / area in your application is consumed by .NET code, where exactly in your code, the path to that code, how many times that code was called by other code and thus reveals where hotspots are located: the areas where a solution can be found. Importantly, they also reveal which areas can be left alone: remember our penny wise pound foolish saying: if a profiler reveals that a group of methods are fast, or don't contribute much to the total time taken for a given task, ignore them. Even if the code in them is perhaps complex and looks like a candidate for optimization: you can work all day on that, it won't matter.  As we're focusing on a single area of the application, it's best to start profiling right before you actually activate the task/area. Most .NET profilers support this by starting the application without starting the profiling procedure just yet. You navigate to the particular part which is slow, start profiling in the profiler, in your application you perform the actions which are considered slow, and afterwards you get a snapshot in the profiler. The snapshot contains the data collected by the profiler during the slow action, so most data is produced by code in the area to investigate. This is important, because it allows you to stay focused on a single area. O/R mapper and RDBMS profiling .NET profilers give you a good insight in the .NET side of things, but not in the RDBMS side of the application. As this article is about O/R mapper powered applications, we're also looking at databases, and the software making it possible to consume the database in your application: the O/R mapper. To understand which parts of the O/R mapper and database participate how much to the total time taken for task T, we need different tools. There are two kind of tools focusing on O/R mappers and database performance profiling: O/R mapper profilers and RDBMS profilers. For O/R mapper profilers, you can look at LLBLGen Prof by hibernating rhinos or the Linq to Sql/LLBLGen Pro profiler by Huagati. Hibernating rhinos also have profilers for other O/R mappers like NHibernate (NHProf) and Entity Framework (EFProf) and work the same as LLBLGen Prof. For RDBMS profilers, you have to look whether the RDBMS vendor has a profiler. For example for SQL Server, the profiler is shipped with SQL Server, for Oracle it's build into the RDBMS, however there are also 3rd party tools. Which tool you're using isn't really important, what's important is that you get insight in which queries are executed during the task / area we're currently focused on and how long they took. Here, the O/R mapper profilers have an advantage as they collect the time it took to execute the query from the application's perspective so they also collect the time it took to transport data across the network. This is important because a query which returns a massive resultset or a resultset with large blob/clob/ntext/image fields takes more time to get transported across the network than a small resultset and a database profiler doesn't take this into account most of the time. Another tool to use in this case, which is more low level and not all O/R mappers support it (though LLBLGen Pro and NHibernate as well do) is tracing: most O/R mappers offer some form of tracing or logging system which you can use to collect the SQL generated and executed and often also other activity behind the scenes. While tracing can produce a tremendous amount of data in some cases, it also gives insight in what's going on. Interpret After we've completed the analysis step it's time to look at the data we've collected. We've done code reviews to see whether we've done anything stupid and which parts actually take place and if the proper algorithms have been implemented. We've done .NET profiling to see which parts are choke points and how much time they contribute to the total time taken to complete the task we're investigating. We've performed O/R mapper profiling and RDBMS profiling to see which queries were executed during the task, how many queries were generated and executed and how long they took to complete, including network transportation. All this data reveals two things: which parts are big contributors to the total time taken and which parts are irrelevant. Both aspects are very important. The parts which are irrelevant (i.e. don't contribute significantly to the total time taken) can be ignored from now on, we won't look at them. The parts which contribute a lot to the total time taken are important to look at. We now have to first look at the .NET profiler results, to see whether the time taken is consumed in our own code, in .NET framework code, in the O/R mapper itself or somewhere else. For example if most of the time is consumed by DbCommand.ExecuteReader, the time it took to complete the task is depending on the time the data is fetched from the database. If there was just 1 query executed, according to tracing or O/R mapper profilers / RDBMS profilers, check whether that query is optimal, uses indexes or has to deal with a lot of data. Interpret means that you follow the path from begin to end through the data collected and determine where, along the path, the most time is contributed. It also means that you have to check whether this was expected or is totally unexpected. My previous example of the 10 row resultset of a query which groups millions of rows will likely reveal that a long time is spend inside the database and almost no time is spend in the .NET code, meaning the RDBMS part contributes the most to the total time taken, the rest is compared to that time, irrelevant. Considering the vastness of the source data set, it's expected this will take some time. However, does it need tweaking? Perhaps all possible tweaks are already in place. In the interpret step you then have to decide that further action in this area is necessary or not, based on what the analysis results show: if the analysis results were unexpected and in the area where the most time is contributed to the total time taken is room for improvement, action should be taken. If not, you can only accept the situation and move on. In all cases, document your decision together with the analysis you've done. If you decide that the perceived performance problem is actually expected due to the nature of the task performed, it's essential that in the future when someone else looks at the application and starts asking questions you can answer them properly and new analysis is only necessary if situations changed. Fix After interpreting the analysis results you've concluded that some areas need adjustment. This is the fix step: you're actively correcting the performance problem with proper action targeted at the real cause. In many cases related to O/R mapper powered applications it means you'll use different features of the O/R mapper to achieve the same goal, or apply optimizations at the RDBMS level. It could also mean you apply caching inside your application (compromise memory consumption over performance) to avoid unnecessary re-querying data and re-consuming the results. After applying a change, it's key you re-do the analysis and interpretation steps: compare the results and expectations with what you had before, to see whether your actions had any effect or whether it moved the problem to a different part of the application. Don't fall into the trap to do partly analysis: do the full analysis again: .NET profiling and O/R mapper / RDBMS profiling. It might very well be that the changes you've made make one part faster but another part significantly slower, in such a way that the overall problem hasn't changed at all. Performance tuning is dealing with compromises and making choices: to use one feature over the other, to accept a higher memory footprint, to go away from the strict-OO path and execute queries directly onto the RDBMS, these are choices and compromises which will cross your path if you want to fix performance problems with respect to O/R mappers or data-access and databases in general. In most cases it's not a big issue: alternatives are often good choices too and the compromises aren't that hard to deal with. What is important is that you document why you made a choice, a compromise: which analysis data, which interpretation led you to the choice made. This is key for good maintainability in the years to come. Most common performance problems with O/R mappers Below is an incomplete list of common performance problems related to data-access / O/R mappers / RDBMS code. It will help you with fixing the hotspots you found in the interpretation step. SELECT N+1: (Lazy-loading specific). Lazy loading triggered performance bottlenecks. Consider a list of Orders bound to a grid. You have a Field mapped onto a related field in Order, Customer.CompanyName. Showing this column in the grid will make the grid fetch (indirectly) for each row the Customer row. This means you'll get for the single list not 1 query (for the orders) but 1+(the number of orders shown) queries. To solve this: use eager loading using a prefetch path to fetch the customers with the orders. SELECT N+1 is easy to spot with an O/R mapper profiler or RDBMS profiler: if you see a lot of identical queries executed at once, you have this problem. Prefetch paths using many path nodes or sorting, or limiting. Eager loading problem. Prefetch paths can help with performance, but as 1 query is fetched per node, it can be the number of data fetched in a child node is bigger than you think. Also consider that data in every node is merged on the client within the parent. This is fast, but it also can take some time if you fetch massive amounts of entities. If you keep fetches small, you can use tuning parameters like the ParameterizedPrefetchPathThreshold setting to get more optimal queries. Deep inheritance hierarchies of type Target Per Entity/Type. If you use inheritance of type Target per Entity / Type (each type in the inheritance hierarchy is mapped onto its own table/view), fetches will join subtype- and supertype tables in many cases, which can lead to a lot of performance problems if the hierarchy has many types. With this problem, keep inheritance to a minimum if possible, or switch to a hierarchy of type Target Per Hierarchy, which means all entities in the inheritance hierarchy are mapped onto the same table/view. Of course this has its own set of drawbacks, but it's a compromise you might want to take. Fetching massive amounts of data by fetching large lists of entities. LLBLGen Pro supports paging (and limiting the # of rows returned), which is often key to process through large sets of data. Use paging on the RDBMS if possible (so a query is executed which returns only the rows in the page requested). When using paging in a web application, be sure that you switch server-side paging on on the datasourcecontrol used. In this case, paging on the grid alone is not enough: this can lead to fetching a lot of data which is then loaded into the grid and paged there. Keep note that analyzing queries for paging could lead to the false assumption that paging doesn't occur, e.g. when the query contains a field of type ntext/image/clob/blob and DISTINCT can't be applied while it should have (e.g. due to a join): the datareader will do DISTINCT filtering on the client. this is a little slower but it does perform paging functionality on the data-reader so it won't fetch all rows even if the query suggests it does. Fetch massive amounts of data because blob/clob/ntext/image fields aren't excluded. LLBLGen Pro supports field exclusion for queries. You can exclude fields (also in prefetch paths) per query to avoid fetching all fields of an entity, e.g. when you don't need them for the logic consuming the resultset. Excluding fields can greatly reduce the amount of time spend on data-transport across the network. Use this optimization if you see that there's a big difference between query execution time on the RDBMS and the time reported by the .NET profiler for the ExecuteReader method call. Doing client-side aggregates/scalar calculations by consuming a lot of data. If possible, try to formulate a scalar query or group by query using the projection system or GetScalar functionality of LLBLGen Pro to do data consumption on the RDBMS server. It's far more efficient to process data on the RDBMS server than to first load it all in memory, then traverse the data in-memory to calculate a value. Using .ToList() constructs inside linq queries. It might be you use .ToList() somewhere in a Linq query which makes the query be run partially in-memory. Example: var q = from c in metaData.Customers.ToList() where c.Country=="Norway" select c; This will actually fetch all customers in-memory and do an in-memory filtering, as the linq query is defined on an IEnumerable<T>, and not on the IQueryable<T>. Linq is nice, but it can often be a bit unclear where some parts of a Linq query might run. Fetching all entities to delete into memory first. To delete a set of entities it's rather inefficient to first fetch them all into memory and then delete them one by one. It's more efficient to execute a DELETE FROM ... WHERE query on the database directly to delete the entities in one go. LLBLGen Pro supports this feature, and so do some other O/R mappers. It's not always possible to do this operation in the context of an O/R mapper however: if an O/R mapper relies on a cache, these kind of operations are likely not supported because they make it impossible to track whether an entity is actually removed from the DB and thus can be removed from the cache. Fetching all entities to update with an expression into memory first. Similar to the previous point: it is more efficient to update a set of entities directly with a single UPDATE query using an expression instead of fetching the entities into memory first and then updating the entities in a loop, and afterwards saving them. It might however be a compromise you don't want to take as it is working around the idea of having an object graph in memory which is manipulated and instead makes the code fully aware there's a RDBMS somewhere. Conclusion Performance tuning is almost always about compromises and making choices. It's also about knowing where to look and how the systems in play behave and should behave. The four steps I provided should help you stay focused on the real problem and lead you towards the solution. Knowing how to optimally use the systems participating in your own code (.NET framework, O/R mapper, RDBMS, network/services) is key for success as well as knowing what's going on inside the application you built. I hope you'll find this guide useful in tracking down performance problems and dealing with them in a useful way.  

  Read the article

• Ancillary Objects: Separate Debug ELF Files For Solaris

  - by Ali Bahrami

  We introduced a new object ELF object type in Solaris 11 Update 1 called the Ancillary Object. This posting describes them, using material originally written during their development, the PSARC arc case, and the Solaris Linker and Libraries Manual. ELF objects contain allocable sections, which are mapped into memory at runtime, and non-allocable sections, which are present in the file for use by debuggers and observability tools, but which are not mapped or used at runtime. Typically, all of these sections exist within a single object file. Ancillary objects allow them to instead go into a separate file. There are different reasons given for wanting such a feature. One can debate whether the added complexity is worth the benefit, and in most cases it is not. However, one important case stands out — customers with very large 32-bit objects who are not ready or able to make the transition to 64-bits. We have customers who build extremely large 32-bit objects. Historically, the debug sections in these objects have used the stabs format, which is limited, but relatively compact. In recent years, the industry has transitioned to the powerful but verbose DWARF standard. In some cases, the size of these debug sections is large enough to push the total object file size past the fundamental 4GB limit for 32-bit ELF object files. The best, and ultimately only, solution to overly large objects is to transition to 64-bits. However, consider environments where: Hundreds of users may be executing the code on large shared systems. (32-bits use less memory and bus bandwidth, and on sparc runs just as fast as 64-bit code otherwise). Complex finely tuned code, where the original authors may no longer be available. Critical production code, that was expensive to qualify and bring online, and which is otherwise serving its intended purpose without issue. Users in these risk adverse and/or high scale categories have good reasons to push 32-bits objects to the limit before moving on. Ancillary objects offer these users a longer runway. Design The design of ancillary objects is intended to be simple, both to help human understanding when examining elfdump output, and to lower the bar for debuggers such as dbx to support them. The primary and ancillary objects have the same set of section headers, with the same names, in the same order (i.e. each section has the same index in both files). A single added section of type SHT_SUNW_ANCILLARY is added to both objects, containing information that allows a debugger to identify and validate both files relative to each other. Given one of these files, the ancillary section allows you to identify the other. Allocable sections go in the primary object, and non-allocable ones go into the ancillary object. A small set of non-allocable objects, notably the symbol table, are copied into both objects. As noted above, most sections are only written to one of the two objects, but both objects have the same section header array. The section header in the file that does not contain the section data is tagged with the SHF_SUNW_ABSENT section header flag to indicate its placeholder status. Compiler writers and others who produce objects can set the SUNW_SHF_PRIMARY section header flag to mark non-allocable sections that should go to the primary object rather than the ancillary. If you don't request an ancillary object, the Solaris ELF format is unchanged. Users who don't use ancillary objects do not pay for the feature. This is important, because they exist to serve a small subset of our users, and must not complicate the common case. If you do request an ancillary object, the runtime behavior of the primary object will be the same as that of a normal object. There is no added runtime cost. The primary and ancillary object together represent a logical single object. This is facilitated by the use of a single set of section headers. One can easily imagine a tool that can merge a primary and ancillary object into a single file, or the reverse. (Note that although this is an interesting intellectual exercise, we don't actually supply such a tool because there's little practical benefit above and beyond using ld to create the files). Among the benefits of this approach are: There is no need for per-file symbol tables to reflect the contents of each file. The same symbol table that would be produced for a standard object can be used. The section contents are identical in either case — there is no need to alter data to accommodate multiple files. It is very easy for a debugger to adapt to these new files, and the processing involved can be encapsulated in input/output routines. Most of the existing debugger implementation applies without modification. The limit of a 4GB 32-bit output object is now raised to 4GB of code, and 4GB of debug data. There is also the future possibility (not currently supported) to support multiple ancillary objects, each of which could contain up to 4GB of additional debug data. It must be noted however that the 32-bit DWARF debug format is itself inherently 32-bit limited, as it uses 32-bit offsets between debug sections, so the ability to employ multiple ancillary object files may not turn out to be useful. Using Ancillary Objects (From the Solaris Linker and Libraries Guide) By default, objects contain both allocable and non-allocable sections. Allocable sections are the sections that contain executable code and the data needed by that code at runtime. Non-allocable sections contain supplemental information that is not required to execute an object at runtime. These sections support the operation of debuggers and other observability tools. The non-allocable sections in an object are not loaded into memory at runtime by the operating system, and so, they have no impact on memory use or other aspects of runtime performance no matter their size. For convenience, both allocable and non-allocable sections are normally maintained in the same file. However, there are situations in which it can be useful to separate these sections. To reduce the size of objects in order to improve the speed at which they can be copied across wide area networks. To support fine grained debugging of highly optimized code requires considerable debug data. In modern systems, the debugging data can easily be larger than the code it describes. The size of a 32-bit object is limited to 4 Gbytes. In very large 32-bit objects, the debug data can cause this limit to be exceeded and prevent the creation of the object. To limit the exposure of internal implementation details. Traditionally, objects have been stripped of non-allocable sections in order to address these issues. Stripping is effective, but destroys data that might be needed later. The Solaris link-editor can instead write non-allocable sections to an ancillary object. This feature is enabled with the -z ancillary command line option. $ ld ... -z ancillary[=outfile] ...By default, the ancillary file is given the same name as the primary output object, with a .anc file extension. However, a different name can be provided by providing an outfile value to the -z ancillary option. When -z ancillary is specified, the link-editor performs the following actions. All allocable sections are written to the primary object. In addition, all non-allocable sections containing one or more input sections that have the SHF_SUNW_PRIMARY section header flag set are written to the primary object. All remaining non-allocable sections are written to the ancillary object. The following non-allocable sections are written to both the primary object and ancillary object. .shstrtab The section name string table. .symtab The full non-dynamic symbol table. .symtab_shndx The symbol table extended index section associated with .symtab. .strtab The non-dynamic string table associated with .symtab. .SUNW_ancillary Contains the information required to identify the primary and ancillary objects, and to identify the object being examined. The primary object and all ancillary objects contain the same array of sections headers. Each section has the same section index in every file. Although the primary and ancillary objects all define the same section headers, the data for most sections will be written to a single file as described above. If the data for a section is not present in a given file, the SHF_SUNW_ABSENT section header flag is set, and the sh_size field is 0. This organization makes it possible to acquire a full list of section headers, a complete symbol table, and a complete list of the primary and ancillary objects from either of the primary or ancillary objects. The following example illustrates the underlying implementation of ancillary objects. An ancillary object is created by adding the -z ancillary command line option to an otherwise normal compilation. The file utility shows that the result is an executable named a.out, and an associated ancillary object named a.out.anc. $ cat hello.c #include <stdio.h> int main(int argc, char **argv) { (void) printf("hello, world\n"); return (0); } $ cc -g -zancillary hello.c $ file a.out a.out.anc a.out: ELF 32-bit LSB executable 80386 Version 1 [FPU], dynamically linked, not stripped, ancillary object a.out.anc a.out.anc: ELF 32-bit LSB ancillary 80386 Version 1, primary object a.out $ ./a.out hello worldThe resulting primary object is an ordinary executable that can be executed in the usual manner. It is no different at runtime than an executable built without the use of ancillary objects, and then stripped of non-allocable content using the strip or mcs commands. As previously described, the primary object and ancillary objects contain the same section headers. To see how this works, it is helpful to use the elfdump utility to display these section headers and compare them. The following table shows the section header information for a selection of headers from the previous link-edit example. Index Section Name Type Primary Flags Ancillary Flags Primary Size Ancillary Size 13 .text PROGBITS ALLOC EXECINSTR ALLOC EXECINSTR SUNW_ABSENT 0x131 0 20 .data PROGBITS WRITE ALLOC WRITE ALLOC SUNW_ABSENT 0x4c 0 21 .symtab SYMTAB 0 0 0x450 0x450 22 .strtab STRTAB STRINGS STRINGS 0x1ad 0x1ad 24 .debug_info PROGBITS SUNW_ABSENT 0 0 0x1a7 28 .shstrtab STRTAB STRINGS STRINGS 0x118 0x118 29 .SUNW_ancillary SUNW_ancillary 0 0 0x30 0x30 The data for most sections is only present in one of the two files, and absent from the other file. The SHF_SUNW_ABSENT section header flag is set when the data is absent. The data for allocable sections needed at runtime are found in the primary object. The data for non-allocable sections used for debugging but not needed at runtime are placed in the ancillary file. A small set of non-allocable sections are fully present in both files. These are the .SUNW_ancillary section used to relate the primary and ancillary objects together, the section name string table .shstrtab, as well as the symbol table.symtab, and its associated string table .strtab. It is possible to strip the symbol table from the primary object. A debugger that encounters an object without a symbol table can use the .SUNW_ancillary section to locate the ancillary object, and access the symbol contained within. The primary object, and all associated ancillary objects, contain a .SUNW_ancillary section that allows all the objects to be identified and related together. $ elfdump -T SUNW_ancillary a.out a.out.anc a.out: Ancillary Section: .SUNW_ancillary index tag value [0] ANC_SUNW_CHECKSUM 0x8724 [1] ANC_SUNW_MEMBER 0x1 a.out [2] ANC_SUNW_CHECKSUM 0x8724 [3] ANC_SUNW_MEMBER 0x1a3 a.out.anc [4] ANC_SUNW_CHECKSUM 0xfbe2 [5] ANC_SUNW_NULL 0 a.out.anc: Ancillary Section: .SUNW_ancillary index tag value [0] ANC_SUNW_CHECKSUM 0xfbe2 [1] ANC_SUNW_MEMBER 0x1 a.out [2] ANC_SUNW_CHECKSUM 0x8724 [3] ANC_SUNW_MEMBER 0x1a3 a.out.anc [4] ANC_SUNW_CHECKSUM 0xfbe2 [5] ANC_SUNW_NULL 0 The ancillary sections for both objects contain the same number of elements, and are identical except for the first element. Each object, starting with the primary object, is introduced with a MEMBER element that gives the file name, followed by a CHECKSUM that identifies the object. In this example, the primary object is a.out, and has a checksum of 0x8724. The ancillary object is a.out.anc, and has a checksum of 0xfbe2. The first element in a .SUNW_ancillary section, preceding the MEMBER element for the primary object, is always a CHECKSUM element, containing the checksum for the file being examined. The presence of a .SUNW_ancillary section in an object indicates that the object has associated ancillary objects. The names of the primary and all associated ancillary objects can be obtained from the ancillary section from any one of the files. It is possible to determine which file is being examined from the larger set of files by comparing the first checksum value to the checksum of each member that follows. Debugger Access and Use of Ancillary Objects Debuggers and other observability tools must merge the information found in the primary and ancillary object files in order to build a complete view of the object. This is equivalent to processing the information from a single file. This merging is simplified by the primary object and ancillary objects containing the same section headers, and a single symbol table. The following steps can be used by a debugger to assemble the information contained in these files. Starting with the primary object, or any of the ancillary objects, locate the .SUNW_ancillary section. The presence of this section identifies the object as part of an ancillary group, contains information that can be used to obtain a complete list of the files and determine which of those files is the one currently being examined. Create a section header array in memory, using the section header array from the object being examined as an initial template. Open and read each file identified by the .SUNW_ancillary section in turn. For each file, fill in the in-memory section header array with the information for each section that does not have the SHF_SUNW_ABSENT flag set. The result will be a complete in-memory copy of the section headers with pointers to the data for all sections. Once this information has been acquired, the debugger can proceed as it would in the single file case, to access and control the running program. Note - The ELF definition of ancillary objects provides for a single primary object, and an arbitrary number of ancillary objects. At this time, the Oracle Solaris link-editor only produces a single ancillary object containing all non-allocable sections. This may change in the future. Debuggers and other observability tools should be written to handle the general case of multiple ancillary objects. ELF Implementation Details (From the Solaris Linker and Libraries Guide) To implement ancillary objects, it was necessary to extend the ELF format to add a new object type (ET_SUNW_ANCILLARY), a new section type (SHT_SUNW_ANCILLARY), and 2 new section header flags (SHF_SUNW_ABSENT, SHF_SUNW_PRIMARY). In this section, I will detail these changes, in the form of diffs to the Solaris Linker and Libraries manual. Part IV ELF Application Binary Interface Chapter 13: Object File Format Object File Format Edit Note: This existing section at the beginning of the chapter describes the ELF header. There's a table of object file types, which now includes the new ET_SUNW_ANCILLARY type. e_type Identifies the object file type, as listed in the following table. NameValueMeaning ET_NONE0No file type ET_REL1Relocatable file ET_EXEC2Executable file ET_DYN3Shared object file ET_CORE4Core file ET_LOSUNW0xfefeStart operating system specific range ET_SUNW_ANCILLARY0xfefeAncillary object file ET_HISUNW0xfefdEnd operating system specific range ET_LOPROC0xff00Start processor-specific range ET_HIPROC0xffffEnd processor-specific range Sections Edit Note: This overview section defines the section header structure, and provides a high level description of known sections. It was updated to define the new SHF_SUNW_ABSENT and SHF_SUNW_PRIMARY flags and the new SHT_SUNW_ANCILLARY section. ... sh_type Categorizes the section's contents and semantics. Section types and their descriptions are listed in Table 13-5. sh_flags Sections support 1-bit flags that describe miscellaneous attributes. Flag definitions are listed in Table 13-8. ... Table 13-5 ELF Section Types, sh_type NameValue . . . SHT_LOSUNW0x6fffffee SHT_SUNW_ancillary0x6fffffee . . . ... SHT_LOSUNW - SHT_HISUNW Values in this inclusive range are reserved for Oracle Solaris OS semantics. SHT_SUNW_ANCILLARY Present when a given object is part of a group of ancillary objects. Contains information required to identify all the files that make up the group. See Ancillary Section. ... Table 13-8 ELF Section Attribute Flags NameValue . . . SHF_MASKOS0x0ff00000 SHF_SUNW_NODISCARD0x00100000 SHF_SUNW_ABSENT0x00200000 SHF_SUNW_PRIMARY0x00400000 SHF_MASKPROC0xf0000000 . . . ... SHF_SUNW_ABSENT Indicates that the data for this section is not present in this file. When ancillary objects are created, the primary object and any ancillary objects, will all have the same section header array, to facilitate merging them to form a complete view of the object, and to allow them to use the same symbol tables. Each file contains a subset of the section data. The data for allocable sections is written to the primary object while the data for non-allocable sections is written to an ancillary file. The SHF_SUNW_ABSENT flag is used to indicate that the data for the section is not present in the object being examined. When the SHF_SUNW_ABSENT flag is set, the sh_size field of the section header must be 0. An application encountering an SHF_SUNW_ABSENT section can choose to ignore the section, or to search for the section data within one of the related ancillary files. SHF_SUNW_PRIMARY The default behavior when ancillary objects are created is to write all allocable sections to the primary object and all non-allocable sections to the ancillary objects. The SHF_SUNW_PRIMARY flag overrides this behavior. Any output section containing one more input section with the SHF_SUNW_PRIMARY flag set is written to the primary object without regard for its allocable status. ... Two members in the section header, sh_link, and sh_info, hold special information, depending on section type. Table 13-9 ELF sh_link and sh_info Interpretation sh_typesh_linksh_info . . . SHT_SUNW_ANCILLARY The section header index of the associated string table. 0 . . . Special Sections Edit Note: This section describes the sections used in Solaris ELF objects, using the types defined in the previous description of section types. It was updated to define the new .SUNW_ancillary (SHT_SUNW_ANCILLARY) section. Various sections hold program and control information. Sections in the following table are used by the system and have the indicated types and attributes. Table 13-10 ELF Special Sections NameTypeAttribute . . . .SUNW_ancillarySHT_SUNW_ancillaryNone . . . ... .SUNW_ancillary Present when a given object is part of a group of ancillary objects. Contains information required to identify all the files that make up the group. See Ancillary Section for details. ... Ancillary Section Edit Note: This new section provides the format reference describing the layout of a .SUNW_ancillary section and the meaning of the various tags. Note that these sections use the same tag/value concept used for dynamic and capabilities sections, and will be familiar to anyone used to working with ELF. In addition to the primary output object, the Solaris link-editor can produce one or more ancillary objects. Ancillary objects contain non-allocable sections that would normally be written to the primary object. When ancillary objects are produced, the primary object and all of the associated ancillary objects contain a SHT_SUNW_ancillary section, containing information that identifies these related objects. Given any one object from such a group, the ancillary section provides the information needed to identify and interpret the others. This section contains an array of the following structures. See sys/elf.h. typedef struct { Elf32_Word a_tag; union { Elf32_Word a_val; Elf32_Addr a_ptr; } a_un; } Elf32_Ancillary; typedef struct { Elf64_Xword a_tag; union { Elf64_Xword a_val; Elf64_Addr a_ptr; } a_un; } Elf64_Ancillary; For each object with this type, a_tag controls the interpretation of a_un. a_val These objects represent integer values with various interpretations. a_ptr These objects represent file offsets or addresses. The following ancillary tags exist. Table 13-NEW1 ELF Ancillary Array Tags NameValuea_un ANC_SUNW_NULL0Ignored ANC_SUNW_CHECKSUM1a_val ANC_SUNW_MEMBER2a_ptr ANC_SUNW_NULL Marks the end of the ancillary section. ANC_SUNW_CHECKSUM Provides the checksum for a file in the c_val element. When ANC_SUNW_CHECKSUM precedes the first instance of ANC_SUNW_MEMBER, it provides the checksum for the object from which the ancillary section is being read. When it follows an ANC_SUNW_MEMBER tag, it provides the checksum for that member. ANC_SUNW_MEMBER Specifies an object name. The a_ptr element contains the string table offset of a null-terminated string, that provides the file name. An ancillary section must always contain an ANC_SUNW_CHECKSUM before the first instance of ANC_SUNW_MEMBER, identifying the current object. Following that, there should be an ANC_SUNW_MEMBER for each object that makes up the complete set of objects. Each ANC_SUNW_MEMBER should be followed by an ANC_SUNW_CHECKSUM for that object. A typical ancillary section will therefore be structured as: TagMeaning ANC_SUNW_CHECKSUMChecksum of this object ANC_SUNW_MEMBERName of object #1 ANC_SUNW_CHECKSUMChecksum for object #1 . . . ANC_SUNW_MEMBERName of object N ANC_SUNW_CHECKSUMChecksum for object N ANC_SUNW_NULL An object can therefore identify itself by comparing the initial ANC_SUNW_CHECKSUM to each of the ones that follow, until it finds a match. Related Other Work The GNU developers have also encountered the need/desire to support separate debug information files, and use the solution detailed at http://sourceware.org/gdb/onlinedocs/gdb/Separate-Debug-Files.html. At the current time, the separate debug file is constructed by building the standard object first, and then copying the debug data out of it in a separate post processing step, Hence, it is limited to a total of 4GB of code and debug data, just as a single object file would be. They are aware of this, and I have seen online comments indicating that they may add direct support for generating these separate files to their link-editor. It is worth noting that the GNU objcopy utility is available on Solaris, and that the Studio dbx debugger is able to use these GNU style separate debug files even on Solaris. Although this is interesting in terms giving Linux users a familiar environment on Solaris, the 4GB limit means it is not an answer to the problem of very large 32-bit objects. We have also encountered issues with objcopy not understanding Solaris-specific ELF sections, when using this approach. The GNU community also has a current effort to adapt their DWARF debug sections in order to move them to separate files before passing the relocatable objects to the linker. The details of Project Fission can be found at http://gcc.gnu.org/wiki/DebugFission. The goal of this project appears to be to reduce the amount of data seen by the link-editor. The primary effort revolves around moving DWARF data to separate .dwo files so that the link-editor never encounters them. The details of modifying the DWARF data to be usable in this form are involved — please see the above URL for details.

  Read the article

• Extending NerdDinner: Adding Geolocated Flair

  - by Jon Galloway

  NerdDinner is a website with the audacious goal of “Organizing the world’s nerds and helping them eat in packs.” Because nerds aren’t likely to socialize with others unless a website tells them to do it. Scott Hanselman showed off a lot of the cool features we’ve added to NerdDinner lately during his popular talk at MIX10, Beyond File | New Company: From Cheesy Sample to Social Platform. Did you miss it? Go ahead and watch it, I’ll wait. One of the features we wanted to add was flair. You know about flair, right? It’s a way to let folks who like your site show it off in their own site. For example, here’s my StackOverflow flair: Great! So how could we add some of this flair stuff to NerdDinner? What do we want to show? If we’re going to encourage our users to give up a bit of their beautiful website to show off a bit of ours, we need to think about what they’ll want to show. For instance, my StackOverflow flair is all about me, not StackOverflow. So how will this apply to NerdDinner? Since NerdDinner is all about organizing local dinners, in order for the flair to be useful it needs to make sense for the person viewing the web page. If someone visits from Egypt visits my blog, they should see information about NerdDinners in Egypt. That’s geolocation – localizing site content based on where the browser’s sitting, and it makes sense for flair as well as entire websites. So we’ll set up a simple little callout that prompts them to host a dinner in their area: Hopefully our flair works and there is a dinner near your viewers, so they’ll see another view which lists upcoming dinners near them: The Geolocation Part Generally website geolocation is done by mapping the requestor’s IP address to a geographic area. It’s not an exact science, but I’ve always found it to be pretty accurate. There are (at least) three ways to handle it: You pay somebody like MaxMind for a database (with regular updates) that sits on your server, and you use their API to do lookups. I used this on a pretty big project a few years ago and it worked well. You use HTML 5 Geolocation API or Google Gears or some other browser based solution. I think those are cool (I use Google Gears a lot), but they’re both in flux right now and I don’t think either has a wide enough of an install base yet to rely on them. You might want to, but I’ve heard you do all kinds of crazy stuff, and sometimes it gets you in trouble. I don’t mean talk out of line, but we all laugh behind your back a bit. But, hey, it’s up to you. It’s your flair or whatever. There are some free webservices out there that will take an IP address and give you location information. Easy, and works for everyone. That’s what we’re doing. I looked at a few different services and settled on IPInfoDB. It’s free, has a great API, and even returns JSON, which is handy for Javascript use. The IP query is pretty simple. We hit a URL like this: http://ipinfodb.com/ip_query.php?ip=74.125.45.100&timezone=false … and we get an XML response back like this… <?xml version="1.0" encoding="UTF-8"?> <Response> <Ip>74.125.45.100</Ip> <Status>OK</Status> <CountryCode>US</CountryCode> <CountryName>United States</CountryName> <RegionCode>06</RegionCode> <RegionName>California</RegionName> <City>Mountain View</City> <ZipPostalCode>94043</ZipPostalCode> <Latitude>37.4192</Latitude> <Longitude>-122.057</Longitude> </Response> So we’ll build some data transfer classes to hold the location information, like this: public class LocationInfo { public string Country { get; set; } public string RegionName { get; set; } public string City { get; set; } public string ZipPostalCode { get; set; } public LatLong Position { get; set; } } public class LatLong { public float Lat { get; set; } public float Long { get; set; } } And now hitting the service is pretty simple: public static LocationInfo HostIpToPlaceName(string ip) { string url = "http://ipinfodb.com/ip_query.php?ip={0}&timezone=false"; url = String.Format(url, ip); var result = XDocument.Load(url); var location = (from x in result.Descendants("Response") select new LocationInfo { City = (string)x.Element("City"), RegionName = (string)x.Element("RegionName"), Country = (string)x.Element("CountryName"), ZipPostalCode = (string)x.Element("CountryName"), Position = new LatLong { Lat = (float)x.Element("Latitude"), Long = (float)x.Element("Longitude") } }).First(); return location; } Getting The User’s IP Okay, but first we need the end user’s IP, and you’d think it would be as simple as reading the value from HttpContext: HttpContext.Current.Request.UserHostAddress But you’d be wrong. Sorry. UserHostAddress just wraps HttpContext.Current.Request.ServerVariables["REMOTE_ADDR"], but that doesn’t get you the IP for users behind a proxy. That’s in another header, “HTTP_X_FORWARDED_FOR". So you can either hit a wrapper and then check a header, or just check two headers. I went for uniformity: string SourceIP = string.IsNullOrEmpty(Request.ServerVariables["HTTP_X_FORWARDED_FOR"]) ? Request.ServerVariables["REMOTE_ADDR"] : Request.ServerVariables["HTTP_X_FORWARDED_FOR"]; We’re almost set to wrap this up, but first let’s talk about our views. Yes, views, because we’ll have two. Selecting the View We wanted to make it easy for people to include the flair in their sites, so we looked around at how other people were doing this. The StackOverflow folks have a pretty good flair system, which allows you to include the flair in your site as either an IFRAME reference or a Javascript include. We’ll do both. We have a ServicesController to handle use of the site information outside of NerdDinner.com, so this fits in pretty well there. We’ll be displaying the same information for both HTML and Javascript flair, so we can use one Flair controller action which will return a different view depending on the requested format. Here’s our general flow for our controller action: Get the user’s IP Translate it to a location Grab the top three upcoming dinners that are near that location Select the view based on the format (defaulted to “html”) Return a FlairViewModel which contains the list of dinners and the location information public ActionResult Flair(string format = "html") { string SourceIP = string.IsNullOrEmpty( Request.ServerVariables["HTTP_X_FORWARDED_FOR"]) ? Request.ServerVariables["REMOTE_ADDR"] : Request.ServerVariables["HTTP_X_FORWARDED_FOR"]; var location = GeolocationService.HostIpToPlaceName(SourceIP); var dinners = dinnerRepository. FindByLocation(location.Position.Lat, location.Position.Long). OrderByDescending(p => p.EventDate).Take(3); // Select the view we'll return. // Using a switch because we'll add in JSON and other formats later. string view; switch (format.ToLower()) { case "javascript": view = "JavascriptFlair"; break; default: view = "Flair"; break; } return View( view, new FlairViewModel { Dinners = dinners.ToList(), LocationName = string.IsNullOrEmpty(location.City) ? "you" : String.Format("{0}, {1}", location.City, location.RegionName) } ); } Note: I’m not in love with the logic here, but it seems like overkill to extract the switch statement away when we’ll probably just have two or three views. What do you think? The HTML View The HTML version of the view is pretty simple – the only thing of any real interest here is the use of an extension method to truncate strings that are would cause the titles to wrap. public static string Truncate(this string s, int maxLength) { if (string.IsNullOrEmpty(s) || maxLength <= 0) return string.Empty; else if (s.Length > maxLength) return s.Substring(0, maxLength) + "..."; else return s; }   So here’s how the HTML view ends up looking: <%@ Page Title="" Language="C#" Inherits="System.Web.Mvc.ViewPage<FlairViewModel>" %> <%@ Import Namespace="NerdDinner.Helpers" %> <%@ Import Namespace="NerdDinner.Models" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Nerd Dinner</title> <link href="/Content/Flair.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="nd-wrapper"> <h2 id="nd-header">NerdDinner.com</h2> <div id="nd-outer"> <% if (Model.Dinners.Count == 0) { %> <div id="nd-bummer"> Looks like there's no Nerd Dinners near <%:Model.LocationName %> in the near future. Why not <a target="_blank" href="http://www.nerddinner.com/Dinners/Create">host one</a>?</div> <% } else { %> <h3> Dinners Near You</h3> <ul> <% foreach (var item in Model.Dinners) { %> <li> <%: Html.ActionLink(String.Format("{0} with {1} on {2}", item.Title.Truncate(20), item.HostedBy, item.EventDate.ToShortDateString()), "Details", "Dinners", new { id = item.DinnerID }, new { target = "_blank" })%></li> <% } %> </ul> <% } %> <div id="nd-footer"> More dinners and fun at <a target="_blank" href="http://nrddnr.com">http://nrddnr.com</a></div> </div> </div> </body> </html> You’d include this in a page using an IFRAME, like this: <IFRAME height=230 marginHeight=0 src="http://nerddinner.com/services/flair" frameBorder=0 width=160 marginWidth=0 scrolling=no></IFRAME> The Javascript view The Javascript flair is written so you can include it in a webpage with a simple script include, like this: <script type="text/javascript" src="http://nerddinner.com/services/flair?format=javascript"></script> The goal of this view is very similar to the HTML embed view, with a few exceptions: We’re creating a script element and adding it to the head of the document, which will then document.write out the content. Note that you have to consider if your users will actually have a <head> element in their documents, but for website flair use cases I think that’s a safe bet. Since the content is being added to the existing page rather than shown in an IFRAME, all links need to be absolute. That means we can’t use Html.ActionLink, since it generates relative routes. We need to escape everything since it’s being written out as strings. We need to set the content type to application/x-javascript. The easiest way to do that is to use the <%@ Page ContentType%> directive. <%@ Page Language="C#" Inherits="System.Web.Mvc.ViewPage<NerdDinner.Models.FlairViewModel>" ContentType="application/x-javascript" %> <%@ Import Namespace="NerdDinner.Helpers" %> <%@ Import Namespace="NerdDinner.Models" %> document.write('<script>var link = document.createElement(\"link\");link.href = \"http://nerddinner.com/content/Flair.css\";link.rel = \"stylesheet\";link.type = \"text/css\";var head = document.getElementsByTagName(\"head\")[0];head.appendChild(link);</script>'); document.write('<div id=\"nd-wrapper\"><h2 id=\"nd-header\">NerdDinner.com</h2><div id=\"nd-outer\">'); <% if (Model.Dinners.Count == 0) { %> document.write('<div id=\"nd-bummer\">Looks like there\'s no Nerd Dinners near <%:Model.LocationName %> in the near future. Why not <a target=\"_blank\" href=\"http://www.nerddinner.com/Dinners/Create\">host one</a>?</div>'); <% } else { %> document.write('<h3> Dinners Near You</h3><ul>'); <% foreach (var item in Model.Dinners) { %> document.write('<li><a target=\"_blank\" href=\"http://nrddnr.com/<%: item.DinnerID %>\"><%: item.Title.Truncate(20) %> with <%: item.HostedBy %> on <%: item.EventDate.ToShortDateString() %></a></li>'); <% } %> document.write('</ul>'); <% } %> document.write('<div id=\"nd-footer\"> More dinners and fun at <a target=\"_blank\" href=\"http://nrddnr.com\">http://nrddnr.com</a></div></div></div>'); Getting IP’s for Testing There are a variety of online services that will translate a location to an IP, which were handy for testing these out. I found http://www.itouchmap.com/latlong.html to be most useful, but I’m open to suggestions if you know of something better. Next steps I think the next step here is to minimize load – you know, in case people start actually using this flair. There are two places to think about – the NerdDinner.com servers, and the services we’re using for Geolocation. I usually think about caching as a first attack on server load, but that’s less helpful here since every user will have a different IP. Instead, I’d look at taking advantage of Asynchronous Controller Actions, a cool new feature in ASP.NET MVC 2. Async Actions let you call a potentially long-running webservice without tying up a thread on the server while waiting for the response. There’s some good info on that in the MSDN documentation, and Dino Esposito wrote a great article on Asynchronous ASP.NET Pages in the April 2010 issue of MSDN Magazine. But let’s think of the children, shall we? What about ipinfodb.com? Well, they don’t have specific daily limits, but they do throttle you if you put a lot of traffic on them. From their FAQ: We do not have a specific daily limit but queries that are at a rate faster than 2 per second will be put in "queue". If you stay below 2 queries/second everything will be normal. If you go over the limit, you will still get an answer for all queries but they will be slowed down to about 1 per second. This should not affect most users but for high volume websites, you can either use our IP database on your server or we can whitelist your IP for 5$/month (simply use the donate form and leave a comment with your server IP). Good programming practices such as not querying our API for all page views (you can store the data in a cookie or a database) will also help not reaching the limit. So the first step there is to save the geolocalization information in a time-limited cookie, which will allow us to look up the local dinners immediately without having to hit the geolocation service.

  Read the article

• XNA Screen Manager problem with transitions

  - by NexAddo

  I'm having issues using the game statemanagement example in the game I am developing. I have no issues with my first three screens transitioning between one another. I have a main menu screen, a splash screen and a high score screen that cycle: mainMenuScreen->splashScreen->highScoreScreen->mainMenuScreen The screens change every 15 seconds. Transition times public MainMenuScreen() { TransitionOnTime = TimeSpan.FromSeconds(0.5); TransitionOffTime = TimeSpan.FromSeconds(0.0); currentCreditAmount = Global.CurrentCredits; } public SplashScreen() { TransitionOnTime = TimeSpan.FromSeconds(0.5); TransitionOffTime = TimeSpan.FromSeconds(0.5); } public HighScoreScreen() { TransitionOnTime = TimeSpan.FromSeconds(0.5); TransitionOffTime = TimeSpan.FromSeconds(0.5); } public GamePlayScreen() { TransitionOnTime = TimeSpan.FromSeconds(0.5); TransitionOffTime = TimeSpan.FromSeconds(0.5); } When a user inserts credits they can play the game after pressing start mainMenuScreen->splashScreen->highScoreScreen->(loops forever) || || || ===========Credits In============= || Start || \/ LoadingScreen || Start || \/ GamePlayScreen During each of these transitions, between screens, the same code is used, which exits(removes) all current active screens and respects transitions, then adds the new screen to the screen manager: foreach (GameScreen screen in ScreenManager.GetScreens()) screen.ExitScreen(); //AddScreen takes a new screen to manage and the controlling player ScreenManager.AddScreen(new NameOfScreenHere(), null); Each screen is removed from the ScreenManager with ExitScreen() and using this function, each screen transition is respected. The problem I am having is with my gamePlayScreen. When the current game is finished and the transition is complete for the gamePlayScreen, it should be removed and the next screens should be added to the ScreenManager. GamePlayScreen Code Snippet private void FinishCurrentGame() { AudioManager.StopSounds(); this.UnloadContent(); if (Global.SaveDevice.IsReady) Stats.Save(); if (HighScoreScreen.IsInHighscores(timeLimit)) { foreach (GameScreen screen in ScreenManager.GetScreens()) screen.ExitScreen(); Global.TimeRemaining = timeLimit; ScreenManager.AddScreen(new BackgroundScreen(), null); ScreenManager.AddScreen(new MessageBoxScreen("Enter your Initials", true), null); } else { foreach (GameScreen screen in ScreenManager.GetScreens()) screen.ExitScreen(); ScreenManager.AddScreen(new BackgroundScreen(), null); ScreenManager.AddScreen(new MainMenuScreen(), null); } } The problem is that when isExiting is set to true by screen.ExitScreen() for the gamePlayScreen, the transition never completes the transition and removes the screen from the ScreenManager. Every other screen that I use the same technique to add and remove each screen fully transitions On/Off and is removed at the appropriate time from the ScreenManager, but noy my GamePlayScreen. Has anyone that has used the GameStateManagement example experienced this issue or can someone see the mistake I am making? EDIT This is what I tracked down. When the game is done, I call foreach (GameScreen screen in ScreenManager.GetScreens()) screen.ExitScreen(); to start the transition off process for the gameplay screen. At this point there is only 1 screen on the ScreenManager stack. The gamePlay screen gets isExiting set to true and starts to transition off. Right after the above call to ExitScreen() I add a background screen and menu screen to the screenManager: ScreenManager.AddScreen(new background(), null); ScreenManager.AddScreen(new Menu(), null); The count of the ScreenManager is now 3. What I noticed while stepping through the updates for GameScreen and ScreenManager, the gameplay screen never gets to the point where the transistion process finishes so the ScreenManager can remove it from the stack. This anomaly does not happen to any of my other screens when I switch between them. Screen Manager Code #region File Description //----------------------------------------------------------------------------- // ScreenManager.cs // // Microsoft XNA Community Game Platform // Copyright (C) Microsoft Corporation. All rights reserved. //----------------------------------------------------------------------------- #endregion #define DEMO #region Using Statements using System; using System.Diagnostics; using System.Collections.Generic; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.Graphics; using PerformanceUtility.GameDebugTools; #endregion namespace GameStateManagement { /// <summary> /// The screen manager is a component which manages one or more GameScreen /// instances. It maintains a stack of screens, calls their Update and Draw /// methods at the appropriate times, and automatically routes input to the /// topmost active screen. /// </summary> public class ScreenManager : DrawableGameComponent { #region Fields List<GameScreen> screens = new List<GameScreen>(); List<GameScreen> screensToUpdate = new List<GameScreen>(); InputState input = new InputState(); SpriteBatch spriteBatch; SpriteFont font; Texture2D blankTexture; bool isInitialized; bool getOut; bool traceEnabled; #if DEBUG DebugSystem debugSystem; Stopwatch stopwatch = new Stopwatch(); bool debugTextEnabled; #endif #endregion #region Properties /// <summary> /// A default SpriteBatch shared by all the screens. This saves /// each screen having to bother creating their own local instance. /// </summary> public SpriteBatch SpriteBatch { get { return spriteBatch; } } /// <summary> /// A default font shared by all the screens. This saves /// each screen having to bother loading their own local copy. /// </summary> public SpriteFont Font { get { return font; } } public Rectangle ScreenRectangle { get { return new Rectangle(0, 0, GraphicsDevice.Viewport.Width, GraphicsDevice.Viewport.Height); } } /// <summary> /// If true, the manager prints out a list of all the screens /// each time it is updated. This can be useful for making sure /// everything is being added and removed at the right times. /// </summary> public bool TraceEnabled { get { return traceEnabled; } set { traceEnabled = value; } } #if DEBUG public bool DebugTextEnabled { get { return debugTextEnabled; } set { debugTextEnabled = value; } } public DebugSystem DebugSystem { get { return debugSystem; } } #endif #endregion #region Initialization /// <summary> /// Constructs a new screen manager component. /// </summary> public ScreenManager(Game game) : base(game) { // we must set EnabledGestures before we can query for them, but // we don't assume the game wants to read them. //TouchPanel.EnabledGestures = GestureType.None; } /// <summary> /// Initializes the screen manager component. /// </summary> public override void Initialize() { base.Initialize(); #if DEBUG debugSystem = DebugSystem.Initialize(Game, "Fonts/MenuFont"); #endif isInitialized = true; } /// <summary> /// Load your graphics content. /// </summary> protected override void LoadContent() { // Load content belonging to the screen manager. ContentManager content = Game.Content; spriteBatch = new SpriteBatch(GraphicsDevice); font = content.Load<SpriteFont>(@"Fonts\menufont"); blankTexture = content.Load<Texture2D>(@"Textures\Backgrounds\blank"); // Tell each of the screens to load their content. foreach (GameScreen screen in screens) { screen.LoadContent(); } } /// <summary> /// Unload your graphics content. /// </summary> protected override void UnloadContent() { // Tell each of the screens to unload their content. foreach (GameScreen screen in screens) { screen.UnloadContent(); } } #endregion #region Update and Draw /// <summary> /// Allows each screen to run logic. /// </summary> public override void Update(GameTime gameTime) { #if DEBUG debugSystem.TimeRuler.StartFrame(); debugSystem.TimeRuler.BeginMark("Update", Color.Blue); if (debugTextEnabled && getOut == false) { debugSystem.FpsCounter.Visible = true; debugSystem.TimeRuler.Visible = true; debugSystem.TimeRuler.ShowLog = true; getOut = true; } else if (debugTextEnabled == false) { getOut = false; debugSystem.FpsCounter.Visible = false; debugSystem.TimeRuler.Visible = false; debugSystem.TimeRuler.ShowLog = false; } #endif // Read the keyboard and gamepad. input.Update(); // Make a copy of the master screen list, to avoid confusion if // the process of updating one screen adds or removes others. screensToUpdate.Clear(); foreach (GameScreen screen in screens) screensToUpdate.Add(screen); bool otherScreenHasFocus = !Game.IsActive; bool coveredByOtherScreen = false; // Loop as long as there are screens waiting to be updated. while (screensToUpdate.Count > 0) { // Pop the topmost screen off the waiting list. GameScreen screen = screensToUpdate[screensToUpdate.Count - 1]; screensToUpdate.RemoveAt(screensToUpdate.Count - 1); // Update the screen. screen.Update(gameTime, otherScreenHasFocus, coveredByOtherScreen); if (screen.ScreenState == ScreenState.TransitionOn || screen.ScreenState == ScreenState.Active) { // If this is the first active screen we came across, // give it a chance to handle input. if (!otherScreenHasFocus) { screen.HandleInput(input); otherScreenHasFocus = true; } // If this is an active non-popup, inform any subsequent // screens that they are covered by it. if (!screen.IsPopup) coveredByOtherScreen = true; } } // Print debug trace? if (traceEnabled) TraceScreens(); #if DEBUG debugSystem.TimeRuler.EndMark("Update"); #endif } /// <summary> /// Prints a list of all the screens, for debugging. /// </summary> void TraceScreens() { List<string> screenNames = new List<string>(); foreach (GameScreen screen in screens) screenNames.Add(screen.GetType().Name); Debug.WriteLine(string.Join(", ", screenNames.ToArray())); } /// <summary> /// Tells each screen to draw itself. /// </summary> public override void Draw(GameTime gameTime) { #if DEBUG debugSystem.TimeRuler.StartFrame(); debugSystem.TimeRuler.BeginMark("Draw", Color.Yellow); #endif foreach (GameScreen screen in screens) { if (screen.ScreenState == ScreenState.Hidden) continue; screen.Draw(gameTime); } #if DEBUG debugSystem.TimeRuler.EndMark("Draw"); #endif #if DEMO SpriteBatch.Begin(); SpriteBatch.DrawString(font, "DEMO - NOT FOR RESALE", new Vector2(20, 80), Color.White); SpriteBatch.End(); #endif } #endregion #region Public Methods /// <summary> /// Adds a new screen to the screen manager. /// </summary> public void AddScreen(GameScreen screen, PlayerIndex? controllingPlayer) { screen.ControllingPlayer = controllingPlayer; screen.ScreenManager = this; screen.IsExiting = false; // If we have a graphics device, tell the screen to load content. if (isInitialized) { screen.LoadContent(); } screens.Add(screen); } /// <summary> /// Removes a screen from the screen manager. You should normally /// use GameScreen.ExitScreen instead of calling this directly, so /// the screen can gradually transition off rather than just being /// instantly removed. /// </summary> public void RemoveScreen(GameScreen screen) { // If we have a graphics device, tell the screen to unload content. if (isInitialized) { screen.UnloadContent(); } screens.Remove(screen); screensToUpdate.Remove(screen); } /// <summary> /// Expose an array holding all the screens. We return a copy rather /// than the real master list, because screens should only ever be added /// or removed using the AddScreen and RemoveScreen methods. /// </summary> public GameScreen[] GetScreens() { return screens.ToArray(); } /// <summary> /// Helper draws a translucent black fullscreen sprite, used for fading /// screens in and out, and for darkening the background behind popups. /// </summary> public void FadeBackBufferToBlack(float alpha) { Viewport viewport = GraphicsDevice.Viewport; spriteBatch.Begin(); spriteBatch.Draw(blankTexture, new Rectangle(0, 0, viewport.Width, viewport.Height), Color.Black * alpha); spriteBatch.End(); } #endregion } } Game Screen Parent of GamePlayScreen #region File Description //----------------------------------------------------------------------------- // GameScreen.cs // // Microsoft XNA Community Game Platform // Copyright (C) Microsoft Corporation. All rights reserved. //----------------------------------------------------------------------------- #endregion #region Using Statements using System; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Input; //using Microsoft.Xna.Framework.Input.Touch; using System.IO; #endregion namespace GameStateManagement { /// <summary> /// Enum describes the screen transition state. /// </summary> public enum ScreenState { TransitionOn, Active, TransitionOff, Hidden, } /// <summary> /// A screen is a single layer that has update and draw logic, and which /// can be combined with other layers to build up a complex menu system. /// For instance the main menu, the options menu, the "are you sure you /// want to quit" message box, and the main game itself are all implemented /// as screens. /// </summary> public abstract class GameScreen { #region Properties /// <summary> /// Normally when one screen is brought up over the top of another, /// the first screen will transition off to make room for the new /// one. This property indicates whether the screen is only a small /// popup, in which case screens underneath it do not need to bother /// transitioning off. /// </summary> public bool IsPopup { get { return isPopup; } protected set { isPopup = value; } } bool isPopup = false; /// <summary> /// Indicates how long the screen takes to /// transition on when it is activated. /// </summary> public TimeSpan TransitionOnTime { get { return transitionOnTime; } protected set { transitionOnTime = value; } } TimeSpan transitionOnTime = TimeSpan.Zero; /// <summary> /// Indicates how long the screen takes to /// transition off when it is deactivated. /// </summary> public TimeSpan TransitionOffTime { get { return transitionOffTime; } protected set { transitionOffTime = value; } } TimeSpan transitionOffTime = TimeSpan.Zero; /// <summary> /// Gets the current position of the screen transition, ranging /// from zero (fully active, no transition) to one (transitioned /// fully off to nothing). /// </summary> public float TransitionPosition { get { return transitionPosition; } protected set { transitionPosition = value; } } float transitionPosition = 1; /// <summary> /// Gets the current alpha of the screen transition, ranging /// from 1 (fully active, no transition) to 0 (transitioned /// fully off to nothing). /// </summary> public float TransitionAlpha { get { return 1f - TransitionPosition; } } /// <summary> /// Gets the current screen transition state. /// </summary> public ScreenState ScreenState { get { return screenState; } protected set { screenState = value; } } ScreenState screenState = ScreenState.TransitionOn; /// <summary> /// There are two possible reasons why a screen might be transitioning /// off. It could be temporarily going away to make room for another /// screen that is on top of it, or it could be going away for good. /// This property indicates whether the screen is exiting for real: /// if set, the screen will automatically remove itself as soon as the /// transition finishes. /// </summary> public bool IsExiting { get { return isExiting; } protected internal set { isExiting = value; } } bool isExiting = false; /// <summary> /// Checks whether this screen is active and can respond to user input. /// </summary> public bool IsActive { get { return !otherScreenHasFocus && (screenState == ScreenState.TransitionOn || screenState == ScreenState.Active); } } bool otherScreenHasFocus; /// <summary> /// Gets the manager that this screen belongs to. /// </summary> public ScreenManager ScreenManager { get { return screenManager; } internal set { screenManager = value; } } ScreenManager screenManager; public KeyboardState KeyboardState { get {return Keyboard.GetState();} } /// <summary> /// Gets the index of the player who is currently controlling this screen, /// or null if it is accepting input from any player. This is used to lock /// the game to a specific player profile. The main menu responds to input /// from any connected gamepad, but whichever player makes a selection from /// this menu is given control over all subsequent screens, so other gamepads /// are inactive until the controlling player returns to the main menu. /// </summary> public PlayerIndex? ControllingPlayer { get { return controllingPlayer; } internal set { controllingPlayer = value; } } PlayerIndex? controllingPlayer; /// <summary> /// Gets whether or not this screen is serializable. If this is true, /// the screen will be recorded into the screen manager's state and /// its Serialize and Deserialize methods will be called as appropriate. /// If this is false, the screen will be ignored during serialization. /// By default, all screens are assumed to be serializable. /// </summary> public bool IsSerializable { get { return isSerializable; } protected set { isSerializable = value; } } bool isSerializable = true; #endregion #region Initialization /// <summary> /// Load graphics content for the screen. /// </summary> public virtual void LoadContent() { } /// <summary> /// Unload content for the screen. /// </summary> public virtual void UnloadContent() { } #endregion #region Update and Draw /// <summary> /// Allows the screen to run logic, such as updating the transition position. /// Unlike HandleInput, this method is called regardless of whether the screen /// is active, hidden, or in the middle of a transition. /// </summary> public virtual void Update(GameTime gameTime, bool otherScreenHasFocus, bool coveredByOtherScreen) { this.otherScreenHasFocus = otherScreenHasFocus; if (isExiting) { // If the screen is going away to die, it should transition off. screenState = ScreenState.TransitionOff; if (!UpdateTransition(gameTime, transitionOffTime, 1)) { // When the transition finishes, remove the screen. ScreenManager.RemoveScreen(this); } } else if (coveredByOtherScreen) { // If the screen is covered by another, it should transition off. if (UpdateTransition(gameTime, transitionOffTime, 1)) { // Still busy transitioning. screenState = ScreenState.TransitionOff; } else { // Transition finished! screenState = ScreenState.Hidden; } } else { // Otherwise the screen should transition on and become active. if (UpdateTransition(gameTime, transitionOnTime, -1)) { // Still busy transitioning. screenState = ScreenState.TransitionOn; } else { // Transition finished! screenState = ScreenState.Active; } } } /// <summary> /// Helper for updating the screen transition position. /// </summary> bool UpdateTransition(GameTime gameTime, TimeSpan time, int direction) { // How much should we move by? float transitionDelta; if (time == TimeSpan.Zero) transitionDelta = 1; else transitionDelta = (float)(gameTime.ElapsedGameTime.TotalMilliseconds / time.TotalMilliseconds); // Update the transition position. transitionPosition += transitionDelta * direction; // Did we reach the end of the transition? if (((direction < 0) && (transitionPosition <= 0)) || ((direction > 0) && (transitionPosition >= 1))) { transitionPosition = MathHelper.Clamp(transitionPosition, 0, 1); return false; } // Otherwise we are still busy transitioning. return true; } /// <summary> /// Allows the screen to handle user input. Unlike Update, this method /// is only called when the screen is active, and not when some other /// screen has taken the focus. /// </summary> public virtual void HandleInput(InputState input) { } public KeyboardState currentKeyState; public KeyboardState lastKeyState; public bool IsKeyHit(Keys key) { if (currentKeyState.IsKeyDown(key) && lastKeyState.IsKeyUp(key)) return true; return false; } /// <summary> /// This is called when the screen should draw itself. /// </summary> public virtual void Draw(GameTime gameTime) { } #endregion #region Public Methods /// <summary> /// Tells the screen to serialize its state into the given stream. /// </summary> public virtual void Serialize(Stream stream) { } /// <summary> /// Tells the screen to deserialize its state from the given stream. /// </summary> public virtual void Deserialize(Stream stream) { } /// <summary> /// Tells the screen to go away. Unlike ScreenManager.RemoveScreen, which /// instantly kills the screen, this method respects the transition timings /// and will give the screen a chance to gradually transition off. /// </summary> public void ExitScreen() { if (TransitionOffTime == TimeSpan.Zero) { // If the screen has a zero transition time, remove it immediately. ScreenManager.RemoveScreen(this); } else { // Otherwise flag that it should transition off and then exit. isExiting = true; } } #endregion #region Helper Methods /// <summary> /// A helper method which loads assets using the screen manager's /// associated game content loader. /// </summary> /// <typeparam name="T">Type of asset.</typeparam> /// <param name="assetName">Asset name, relative to the loader root /// directory, and not including the .xnb extension.</param> /// <returns></returns> public T Load<T>(string assetName) { return ScreenManager.Game.Content.Load<T>(assetName); } #endregion } }

  Read the article

• help with fixing fwts errors log

  - by jasmines

  Here is an extract of results.log: MTRR validation. Test 1 of 3: Validate the kernel MTRR IOMEM setup. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xc0000000 to 0xdfffffff (PCI Bus 0000:00) has incorrect attribute Write-Combining. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xfee01000 to 0xffffffff (PCI Bus 0000:00) has incorrect attribute Write-Protect. ==================================================================================================== Test 1 of 1: Kernel log error check. Kernel message: [ 0.208079] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ADVICE: This is not exactly a failure mode but a warning from the kernel. The _OSI() method has implemented a match to the 'Linux' query in the DSDT and this is redundant because the ACPI driver matches onto the Windows _OSI strings by default. FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1, HIGH Kernel message: [ 3.512783] ACPI Error : Method parse/execution failed [\_SB_.PCI0.GFX0._DOD] (Node f7425858), AE_AML_PACKAGE_LIMIT (20110623/psparse-536) ADVICE: This is a bug picked up by the kernel, but as yet, the firmware test suite has no diagnostic advice for this particular problem. Found 1 unique errors in kernel log. ==================================================================================================== Check if system is using latest microcode. ---------------------------------------------------------------------------------------------------- Cannot read microcode file /usr/share/misc/intel-microcode.dat. Aborted test, initialisation failed. ==================================================================================================== MSR register tests. FAILED [MEDIUM] MSRCPUsInconsistent: Test 1, MSR SYSENTER_ESP (0x175) has 1 inconsistent values across 2 CPUs for (shift: 0 mask: 0xffffffffffffffff). MSR CPU 0 -> 0xf7bb9c40 vs CPU 1 -> 0xf7bc7c40 FAILED [MEDIUM] MSRCPUsInconsistent: Test 1, MSR MISC_ENABLE (0x1a0) has 1 inconsistent values across 2 CPUs for (shift: 0 mask: 0x400c51889). MSR CPU 0 -> 0x850088 vs CPU 1 -> 0x850089 ==================================================================================================== Checks firmware has set PCI Express MaxReadReq to a higher value on non-motherboard devices. ---------------------------------------------------------------------------------------------------- Test 1 of 1: Check firmware settings MaxReadReq for PCI Express devices. MaxReadReq for pci://00:00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) is low (128) [Audio device]. MaxReadReq for pci://00:02:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection is low (128) [Network controller]. FAILED [LOW] LowMaxReadReq: Test 1, 2 devices have low MaxReadReq settings. Firmware may have configured these too low. ADVICE: The MaxReadRequest size is set too low and will affect performance. It will provide excellent bus sharing at the cost of bus data transfer rates. Although not a critical issue, it may be worth considering setting the MaxReadRequest size to 256 or 512 to increase throughput on the PCI Express bus. Some drivers (for example the Brocade Fibre Channel driver) allow one to override the firmware settings. Where possible, this BIOS configuration setting is worth increasing it a little more for better performance at a small reduction of bus sharing. ==================================================================================================== PCIe ASPM check. ---------------------------------------------------------------------------------------------------- Test 1 of 2: PCIe ASPM ACPI test. PCIE ASPM is not controlled by Linux kernel. ADVICE: BIOS reports that Linux kernel should not modify ASPM settings that BIOS configured. It can be intentional because hardware vendors identified some capability bugs between the motherboard and the add-on cards. Test 2 of 2: PCIe ASPM registers test. WARNING: Test 2, RP 00h:1Ch.01h L0s not enabled. WARNING: Test 2, RP 00h:1Ch.01h L1 not enabled. WARNING: Test 2, Device 02h:00h.00h L0s not enabled. WARNING: Test 2, Device 02h:00h.00h L1 not enabled. PASSED: Test 2, PCIE aspm setting matched was matched. WARNING: Test 2, RP 00h:1Ch.05h L0s not enabled. WARNING: Test 2, RP 00h:1Ch.05h L1 not enabled. WARNING: Test 2, Device 85h:00h.00h L0s not enabled. WARNING: Test 2, Device 85h:00h.00h L1 not enabled. PASSED: Test 2, PCIE aspm setting matched was matched. ==================================================================================================== Extract and analyse Windows Management Instrumentation (WMI). Test 1 of 2: Check Windows Management Instrumentation in DSDT Found WMI Method WMAA with GUID: 5FB7F034-2C63-45E9-BE91-3D44E2C707E4, Instance 0x01 Found WMI Event, Notifier ID: 0x80, GUID: 95F24279-4D7B-4334-9387-ACCDC67EF61C, Instance 0x01 PASSED: Test 1, GUID 95F24279-4D7B-4334-9387-ACCDC67EF61C is handled by driver hp-wmi (Vendor: HP). Found WMI Event, Notifier ID: 0xa0, GUID: 2B814318-4BE8-4707-9D84-A190A859B5D0, Instance 0x01 FAILED [MEDIUM] WMIUnknownGUID: Test 1, GUID 2B814318-4BE8-4707-9D84-A190A859B5D0 is unknown to the kernel, a driver may need to be implemented for this GUID. ADVICE: A WMI driver probably needs to be written for this event. It can checked for using: wmi_has_guid("2B814318-4BE8-4707-9D84-A190A859B5D0"). One can install a notify handler using wmi_install_notify_handler("2B814318-4BE8-4707-9D84-A190A859B5D0", handler, NULL). http://lwn.net/Articles/391230 describes how to write an appropriate driver. Found WMI Object, Object ID AB, GUID: 05901221-D566-11D1-B2F0-00A0C9062910, Instance 0x01, Flags: 00 Found WMI Method WMBA with GUID: 1F4C91EB-DC5C-460B-951D-C7CB9B4B8D5E, Instance 0x01 Found WMI Object, Object ID BC, GUID: 2D114B49-2DFB-4130-B8FE-4A3C09E75133, Instance 0x7f, Flags: 00 Found WMI Object, Object ID BD, GUID: 988D08E3-68F4-4C35-AF3E-6A1B8106F83C, Instance 0x19, Flags: 00 Found WMI Object, Object ID BE, GUID: 14EA9746-CE1F-4098-A0E0-7045CB4DA745, Instance 0x01, Flags: 00 Found WMI Object, Object ID BF, GUID: 322F2028-0F84-4901-988E-015176049E2D, Instance 0x01, Flags: 00 Found WMI Object, Object ID BG, GUID: 8232DE3D-663D-4327-A8F4-E293ADB9BF05, Instance 0x01, Flags: 00 Found WMI Object, Object ID BH, GUID: 8F1F6436-9F42-42C8-BADC-0E9424F20C9A, Instance 0x00, Flags: 00 Found WMI Object, Object ID BI, GUID: 8F1F6435-9F42-42C8-BADC-0E9424F20C9A, Instance 0x00, Flags: 00 Found WMI Method WMAC with GUID: 7391A661-223A-47DB-A77A-7BE84C60822D, Instance 0x01 Found WMI Object, Object ID BJ, GUID: DF4E63B6-3BBC-4858-9737-C74F82F821F3, Instance 0x05, Flags: 00 ==================================================================================================== Disassemble DSDT to check for _OSI("Linux"). ---------------------------------------------------------------------------------------------------- Test 1 of 1: Disassemble DSDT to check for _OSI("Linux"). This is not strictly a failure mode, it just alerts one that this has been defined in the DSDT and probably should be avoided since the Linux ACPI driver matches onto the Windows _OSI strings { If (_OSI ("Linux")) { Store (0x03E8, OSYS) } If (_OSI ("Windows 2001")) { Store (0x07D1, OSYS) } If (_OSI ("Windows 2001 SP1")) { Store (0x07D1, OSYS) } If (_OSI ("Windows 2001 SP2")) { Store (0x07D2, OSYS) } If (_OSI ("Windows 2006")) { Store (0x07D6, OSYS) } If (LAnd (MPEN, LEqual (OSYS, 0x07D1))) { TRAP (0x01, 0x48) } TRAP (0x03, 0x35) } WARNING: Test 1, DSDT implements a deprecated _OSI("Linux") test. ==================================================================================================== 0 passed, 0 failed, 1 warnings, 0 aborted, 0 skipped, 0 info only. ==================================================================================================== ACPI DSDT Method Semantic Tests. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP Failed to install global event handler. Test 22 of 93: Check _PSR (Power Source). ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 22, Detected an infinite loop when evaluating method '\_SB_.AC__._PSR'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. PASSED: Test 22, \_SB_.AC__._PSR correctly acquired and released locks 16 times. Test 35 of 93: Check _TMP (Thermal Zone Current Temp). ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 35, Detected an infinite loop when evaluating method '\_TZ_.DTSZ._TMP'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. PASSED: Test 35, \_TZ_.DTSZ._TMP correctly acquired and released locks 14 times. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 35, Detected an infinite loop when evaluating method '\_TZ_.CPUZ._TMP'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. PASSED: Test 35, \_TZ_.CPUZ._TMP correctly acquired and released locks 10 times. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 35, Detected an infinite loop when evaluating method '\_TZ_.SKNZ._TMP'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. PASSED: Test 35, \_TZ_.SKNZ._TMP correctly acquired and released locks 10 times. PASSED: Test 35, _TMP correctly returned sane looking value 0x00000b4c (289.2 degrees K) PASSED: Test 35, \_TZ_.BATZ._TMP correctly acquired and released locks 9 times. PASSED: Test 35, _TMP correctly returned sane looking value 0x00000aac (273.2 degrees K) PASSED: Test 35, \_TZ_.FDTZ._TMP correctly acquired and released locks 7 times. Test 46 of 93: Check _DIS (Disable). FAILED [MEDIUM] MethodShouldReturnNothing: Test 46, \_SB_.PCI0.LPCB.SIO_.COM1._DIS returned values, but was expected to return nothing. Object returned: INTEGER: 0x00000000 ADVICE: This probably won't cause any errors, but it should be fixed as the AML code is not conforming to the expected behaviour as described in the ACPI specification. FAILED [MEDIUM] MethodShouldReturnNothing: Test 46, \_SB_.PCI0.LPCB.SIO_.LPT0._DIS returned values, but was expected to return nothing. Object returned: INTEGER: 0x00000000 ADVICE: This probably won't cause any errors, but it should be fixed as the AML code is not conforming to the expected behaviour as described in the ACPI specification. Test 61 of 93: Check _WAK (System Wake). Test _WAK(1) System Wake, State S1. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 61, Detected an infinite loop when evaluating method '\_WAK'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. Test _WAK(2) System Wake, State S2. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 61, Detected an infinite loop when evaluating method '\_WAK'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. Test _WAK(3) System Wake, State S3. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 61, Detected an infinite loop when evaluating method '\_WAK'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. Test _WAK(4) System Wake, State S4. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 61, Detected an infinite loop when evaluating method '\_WAK'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. Test _WAK(5) System Wake, State S5. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 61, Detected an infinite loop when evaluating method '\_WAK'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. Test 87 of 93: Check _BCL (Query List of Brightness Control Levels Supported). Package has 2 elements: 00: INTEGER: 0x00000000 01: INTEGER: 0x00000000 FAILED [MEDIUM] Method_BCLElementCount: Test 87, Method _BCL should return a package of more than 2 integers, got just 2. Test 88 of 93: Check _BCM (Set Brightness Level). ACPICA Exception AE_AML_PACKAGE_LIMIT during execution of method _BCM FAILED [CRITICAL] AEAMLPackgeLimit: Test 88, Detected error 'Package limit' when evaluating '\_SB_.PCI0.GFX0.DD02._BCM'. ==================================================================================================== ACPI table settings sanity checks. ---------------------------------------------------------------------------------------------------- Test 1 of 1: Check ACPI tables. PASSED: Test 1, Table APIC passed. Table ECDT not present to check. FAILED [MEDIUM] FADT32And64BothDefined: Test 1, FADT 32 bit FIRMWARE_CONTROL is non-zero, and X_FIRMWARE_CONTROL is also non-zero. Section 5.2.9 of the ACPI specification states that if the FIRMWARE_CONTROL is non-zero then X_FIRMWARE_CONTROL must be set to zero. ADVICE: The FADT FIRMWARE_CTRL is a 32 bit pointer that points to the physical memory address of the Firmware ACPI Control Structure (FACS). There is also an extended 64 bit version of this, the X_FIRMWARE_CTRL pointer that also can point to the FACS. Section 5.2.9 of the ACPI specification states that if the X_FIRMWARE_CTRL field contains a non zero value then the FIRMWARE_CTRL field *must* be zero. This error is also detected by the Linux kernel. If FIRMWARE_CTRL and X_FIRMWARE_CTRL are defined, then the kernel just uses the 64 bit version of the pointer. PASSED: Test 1, Table HPET passed. PASSED: Test 1, Table MCFG passed. PASSED: Test 1, Table RSDT passed. PASSED: Test 1, Table RSDP passed. Table SBST not present to check. PASSED: Test 1, Table XSDT passed. ==================================================================================================== Re-assemble DSDT and find syntax errors and warnings. ---------------------------------------------------------------------------------------------------- Test 1 of 2: Disassemble and reassemble DSDT FAILED [HIGH] AMLAssemblerError4043: Test 1, Assembler error in line 2261 Line | AML source ---------------------------------------------------------------------------------------------------- 02258| 0x00000000, // Range Minimum 02259| 0xFEDFFFFF, // Range Maximum 02260| 0x00000000, // Translation Offset 02261| 0x00000000, // Length | ^ | error 4043: Invalid combination of Length and Min/Max fixed flags 02262| ,, _Y0E, AddressRangeMemory, TypeStatic) 02263| DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 02264| 0x00000000, // Granularity ==================================================================================================== ADVICE: (for error #4043): This occurs if the length is zero and just one of the resource MIF/MAF flags are set, or the length is non-zero and resource MIF/MAF flags are both set. These are illegal combinations and need to be fixed. See section 6.4.3.5 Address Space Resource Descriptors of version 4.0a of the ACPI specification for more details. FAILED [HIGH] AMLAssemblerError4050: Test 1, Assembler error in line 2268 Line | AML source ---------------------------------------------------------------------------------------------------- 02265| 0xFEE01000, // Range Minimum 02266| 0xFFFFFFFF, // Range Maximum 02267| 0x00000000, // Translation Offset 02268| 0x011FEFFF, // Length | ^ | error 4050: Length is not equal to fixed Min/Max window 02269| ,, , AddressRangeMemory, TypeStatic) 02270| }) 02271| Method (_CRS, 0, Serialized) ==================================================================================================== ADVICE: (for error #4050): The minimum address is greater than the maximum address. This is illegal. FAILED [HIGH] AMLAssemblerError1104: Test 1, Assembler error in line 8885 Line | AML source ---------------------------------------------------------------------------------------------------- 08882| Method (_DIS, 0, NotSerialized) 08883| { 08884| DSOD (0x02) 08885| Return (0x00) | ^ | warning level 0 1104: Reserved method should not return a value (_DIS) 08886| } 08887| 08888| Method (_SRS, 1, NotSerialized) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1104: Test 1, Assembler error in line 9195 Line | AML source ---------------------------------------------------------------------------------------------------- 09192| Method (_DIS, 0, NotSerialized) 09193| { 09194| DSOD (0x01) 09195| Return (0x00) | ^ | warning level 0 1104: Reserved method should not return a value (_DIS) 09196| } 09197| 09198| Method (_SRS, 1, NotSerialized) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1127: Test 1, Assembler error in line 9242 Line | AML source ---------------------------------------------------------------------------------------------------- 09239| CreateWordField (CRES, \_SB.PCI0.LPCB.SIO.LPT0._CRS._Y21._MAX, MAX2) 09240| CreateByteField (CRES, \_SB.PCI0.LPCB.SIO.LPT0._CRS._Y21._LEN, LEN2) 09241| CreateWordField (CRES, \_SB.PCI0.LPCB.SIO.LPT0._CRS._Y22._INT, IRQ0) 09242| CreateWordField (CRES, \_SB.PCI0.LPCB.SIO.LPT0._CRS._Y23._DMA, DMA0) | ^ | warning level 0 1127: ResourceTag smaller than Field (Tag: 8 bits, Field: 16 bits) 09243| If (RLPD) 09244| { 09245| Store (0x00, Local0) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1128: Test 1, Assembler error in line 18682 Line | AML source ---------------------------------------------------------------------------------------------------- 18679| Store (0x01, Index (DerefOf (Index (Local0, 0x02)), 0x01)) 18680| If (And (WDPE, 0x40)) 18681| { 18682| Wait (\_SB.BEVT, 0x10) | ^ | warning level 0 1128: Result is not used, possible operator timeout will be missed 18683| } 18684| 18685| Store (BRID, Index (DerefOf (Index (Local0, 0x02)), 0x02)) ==================================================================================================== ADVICE: (for warning level 0 #1128): The operation can possibly timeout, and hence the return value indicates an timeout error. However, because the return value is not checked this very probably indicates that the code is buggy. A possible scenario is that a mutex times out and the code attempts to access data in a critical region when it should not. This will lead to undefined behaviour. This should be fixed. Table DSDT (0) reassembly: Found 2 errors, 4 warnings. Test 2 of 2: Disassemble and reassemble SSDT PASSED: Test 2, SSDT (0) reassembly, Found 0 errors, 0 warnings. FAILED [HIGH] AMLAssemblerError1104: Test 2, Assembler error in line 60 Line | AML source ---------------------------------------------------------------------------------------------------- 00057| { 00058| Store (CPDC (Arg0), Local0) 00059| GCAP (Local0) 00060| Return (Local0) | ^ | warning level 0 1104: Reserved method should not return a value (_PDC) 00061| } 00062| 00063| Method (_OSC, 4, NotSerialized) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1104: Test 2, Assembler error in line 174 Line | AML source ---------------------------------------------------------------------------------------------------- 00171| { 00172| Store (\_PR.CPU0.CPDC (Arg0), Local0) 00173| GCAP (Local0) 00174| Return (Local0) | ^ | warning level 0 1104: Reserved method should not return a value (_PDC) 00175| } 00176| 00177| Method (_OSC, 4, NotSerialized) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1104: Test 2, Assembler error in line 244 Line | AML source ---------------------------------------------------------------------------------------------------- 00241| { 00242| Store (\_PR.CPU0.CPDC (Arg0), Local0) 00243| GCAP (Local0) 00244| Return (Local0) | ^ | warning level 0 1104: Reserved method should not return a value (_PDC) 00245| } 00246| 00247| Method (_OSC, 4, NotSerialized) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1104: Test 2, Assembler error in line 290 Line | AML source ---------------------------------------------------------------------------------------------------- 00287| { 00288| Store (\_PR.CPU0.CPDC (Arg0), Local0) 00289| GCAP (Local0) 00290| Return (Local0) | ^ | warning level 0 1104: Reserved method should not return a value (_PDC) 00291| } 00292| 00293| Method (_OSC, 4, NotSerialized) ==================================================================================================== Table SSDT (1) reassembly: Found 0 errors, 4 warnings. PASSED: Test 2, SSDT (2) reassembly, Found 0 errors, 0 warnings. PASSED: Test 2, SSDT (3) reassembly, Found 0 errors, 0 warnings. ==================================================================================================== 3 passed, 10 failed, 0 warnings, 0 aborted, 0 skipped, 0 info only. ==================================================================================================== Critical failures: 1 method test, at 1 log line: 1449: Detected error 'Package limit' when evaluating '\_SB_.PCI0.GFX0.DD02._BCM'. High failures: 11 klog test, at 1 log line: 121: HIGH Kernel message: [ 3.512783] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DOD] (Node f7425858), AE_AML_PACKAGE_LIMIT (20110623/psparse-536) syntaxcheck test, at 1 log line: 1668: Assembler error in line 2261 syntaxcheck test, at 1 log line: 1687: Assembler error in line 2268 syntaxcheck test, at 1 log line: 1703: Assembler error in line 8885 syntaxcheck test, at 1 log line: 1716: Assembler error in line 9195 syntaxcheck test, at 1 log line: 1729: Assembler error in line 9242 syntaxcheck test, at 1 log line: 1742: Assembler error in line 18682 syntaxcheck test, at 1 log line: 1766: Assembler error in line 60 syntaxcheck test, at 1 log line: 1779: Assembler error in line 174 syntaxcheck test, at 1 log line: 1792: Assembler error in line 244 syntaxcheck test, at 1 log line: 1805: Assembler error in line 290 Medium failures: 9 mtrr test, at 1 log line: 76: Memory range 0xc0000000 to 0xdfffffff (PCI Bus 0000:00) has incorrect attribute Write-Combining. mtrr test, at 1 log line: 78: Memory range 0xfee01000 to 0xffffffff (PCI Bus 0000:00) has incorrect attribute Write-Protect. msr test, at 1 log line: 165: MSR SYSENTER_ESP (0x175) has 1 inconsistent values across 2 CPUs for (shift: 0 mask: 0xffffffffffffffff). msr test, at 1 log line: 173: MSR MISC_ENABLE (0x1a0) has 1 inconsistent values across 2 CPUs for (shift: 0 mask: 0x400c51889). wmi test, at 1 log line: 528: GUID 2B814318-4BE8-4707-9D84-A190A859B5D0 is unknown to the kernel, a driver may need to be implemented for this GUID. method test, at 1 log line: 1002: \_SB_.PCI0.LPCB.SIO_.COM1._DIS returned values, but was expected to return nothing. method test, at 1 log line: 1011: \_SB_.PCI0.LPCB.SIO_.LPT0._DIS returned values, but was expected to return nothing. method test, at 1 log line: 1443: Method _BCL should return a package of more than 2 integers, got just 2. acpitables test, at 1 log line: 1643: FADT 32 bit FIRMWARE_CONTROL is non-zero, and X_FIRMWARE_CONTROL is also non-zero. Se

  Read the article

• ANTS CLR and Memory Profiler In Depth Review (Part 1 of 2 &ndash; CLR Profiler)

  - by ToStringTheory

  One of the things that people might not know about me, is my obsession to make my code as efficient as possible.  Many people might not realize how much of a task or undertaking that this might be, but it is surely a task as monumental as climbing Mount Everest, except this time it is a challenge for the mind…  In trying to make code efficient, there are many different factors that play a part – size of project or solution, tiers, language used, experience and training of the programmer, technologies used, maintainability of the code – the list can go on for quite some time. I spend quite a bit of time when developing trying to determine what is the best way to implement a feature to accomplish the efficiency that I look to achieve.  One program that I have recently come to learn about – Red Gate ANTS Performance (CLR) and Memory profiler gives me tools to accomplish that job more efficiently as well.  In this review, I am going to cover some of the features of the ANTS profiler set by compiling some hideous example code to test against. Notice As a member of the Geeks With Blogs Influencers program, one of the perks is the ability to review products, in exchange for a free license to the program.  I have not let this affect my opinions of the product in any way, and Red Gate nor Geeks With Blogs has tried to influence my opinion regarding this product in any way. Introduction The ANTS Profiler pack provided by Red Gate was something that I had not heard of before receiving an email regarding an offer to review it for a license.  Since I look to make my code efficient, it was a no brainer for me to try it out!  One thing that I have to say took me by surprise is that upon downloading the program and installing it you fill out a form for your usual contact information.  Sure enough within 2 hours, I received an email from a sales representative at Red Gate asking if she could help me to achieve the most out of my trial time so it wouldn’t go to waste.  After replying to her and explaining that I was looking to review its feature set, she put me in contact with someone that setup a demo session to give me a quick rundown of its features via an online meeting.  After having dealt with a massive ordeal with one of my utility companies and their complete lack of customer service, Red Gates friendly and helpful representatives were a breath of fresh air, and something I was thankful for. ANTS CLR Profiler The ANTS CLR profiler is the thing I want to focus on the most in this post, so I am going to dive right in now. Install was simple and took no time at all.  It installed both the profiler for the CLR and Memory, but also visual studio extensions to facilitate the usage of the profilers (click any images for full size images): The Visual Studio menu options (under ANTS menu) Starting the CLR Performance Profiler from the start menu yields this window If you follow the instructions after launching the program from the start menu (Click File > New Profiling Session to start a new project), you are given a dialog with plenty of options for profiling: The New Session dialog.  Lots of options.  One thing I noticed is that the buttons in the lower right were half-covered by the panel of the application.  If I had to guess, I would imagine that this is caused by my DPI settings being set to 125%.  This is a problem I have seen in other applications as well that don’t scale well to different dpi scales. The profiler options give you the ability to profile: .NET Executable ASP.NET web application (hosted in IIS) ASP.NET web application (hosted in IIS express) ASP.NET web application (hosted in Cassini Web Development Server) SharePoint web application (hosted in IIS) Silverlight 4+ application Windows Service COM+ server XBAP (local XAML browser application) Attach to an already running .NET 4 process Choosing each option provides a varying set of other variables/options that one can set including options such as application arguments, operating path, record I/O performance performance counters to record (43 counters in all!), etc…  All in all, they give you the ability to profile many different .Net project types, and make it simple to do so.  In most cases of my using this application, I would be using the built in Visual Studio extensions, as they automatically start a new profiling project in ANTS with the options setup, and start your program, however RedGate has made it easy enough to profile outside of Visual Studio as well. On the flip side of this, as someone who lives most of their work life in Visual Studio, one thing I do wish is that instead of opening an entirely separate application/gui to perform profiling after launching, that instead they would provide a Visual Studio panel with the information, and integrate more of the profiling project information into Visual Studio.  So, now that we have an idea of what options that the profiler gives us, its time to test its abilities and features. Horrendous Example Code – Prime Number Generator One of my interests besides development, is Physics and Math – what I went to college for.  I have especially always been interested in prime numbers, as they are something of a mystery…  So, I decided that I would go ahead and to test the abilities of the profiler, I would write a small program, website, and library to generate prime numbers in the quantity that you ask for.  I am going to start off with some terrible code, and show how I would see the profiler being used as a development tool. First off, the IPrimes interface (all code is downloadable at the end of the post): interface IPrimes { IEnumerable<int> GetPrimes(int retrieve); } Simple enough, right?  Anything that implements the interface will (hopefully) provide an IEnumerable of int, with the quantity specified in the parameter argument.  Next, I am going to implement this interface in the most basic way: public class DumbPrimes : IPrimes { public IEnumerable<int> GetPrimes(int retrieve) { //store a list of primes already found var _foundPrimes = new List<int>() { 2, 3 }; //if i ask for 1 or two primes, return what asked for if (retrieve <= _foundPrimes.Count()) return _foundPrimes.Take(retrieve); //the next number to look at int _analyzing = 4; //since I already determined I don't have enough //execute at least once, and until quantity is sufficed do { //assume prime until otherwise determined bool isPrime = true; //start dividing at 2 //divide until number is reached, or determined not prime for (int i = 2; i < _analyzing && isPrime; i++) { //if (i) goes into _analyzing without a remainder, //_analyzing is NOT prime if (_analyzing % i == 0) isPrime = false; } //if it is prime, add to found list if (isPrime) _foundPrimes.Add(_analyzing); //increment number to analyze next _analyzing++; } while (_foundPrimes.Count() < retrieve); return _foundPrimes; } } This is the simplest way to get primes in my opinion.  Checking each number by the straight definition of a prime – is it divisible by anything besides 1 and itself. I have included this code in a base class library for my solution, as I am going to use it to demonstrate a couple of features of ANTS.  This class library is consumed by a simple non-MVVM WPF application, and a simple MVC4 website.  I will not post the WPF code here inline, as it is simply an ObservableCollection<int>, a label, two textbox’s, and a button. Starting a new Profiling Session So, in Visual Studio, I have just completed my first stint developing the GUI and DumbPrimes IPrimes class, so now I want to check my codes efficiency by profiling it.  All I have to do is build the solution (surprised initiating a profiling session doesn’t do this, but I suppose I can understand it), and then click the ANTS menu, followed by Profile Performance.  I am then greeted by the profiler starting up and already monitoring my program live: You are provided with a realtime graph at the top, and a pane at the bottom giving you information on how to proceed.  I am going to start by asking my program to show me the first 15000 primes: After the program finally began responding again (I did all the work on the main UI thread – how bad!), I stopped the profiler, which did kill the process of my program too.  One important thing to note, is that the profiler by default wants to give you a lot of detail about the operation – line hit counts, time per line, percent time per line, etc…  The important thing to remember is that this itself takes a lot of time.  When running my program without the profiler attached, it can generate the 15000 primes in 5.18 seconds, compared to 74.5 seconds – almost a 1500 percent increase.  While this may seem like a lot, remember that there is a trade off.  It may be WAY more inefficient, however, I am able to drill down and make improvements to specific problem areas, and then decrease execution time all around. Analyzing the Profiling Session After clicking ‘Stop Profiling’, the process running my application stopped, and the entire execution time was automatically selected by ANTS, and the results shown below: Now there are a number of interesting things going on here, I am going to cover each in a section of its own: Real Time Performance Counter Bar (top of screen) At the top of the screen, is the real time performance bar.  As your application is running, this will constantly update with the currently selected performance counters status.  A couple of cool things to note are the fact that you can drag a selection around specific time periods to drill down the detail views in the lower 2 panels to information pertaining to only that period. After selecting a time period, you can bookmark a section and name it, so that it is easy to find later, or after reloaded at a later time.  You can also zoom in, out, or fit the graph to the space provided – useful for drilling down. It may be hard to see, but at the top of the processor time graph below the time ticks, but above the red usage graph, there is a green bar. This bar shows at what times a method that is selected in the ‘Call tree’ panel is called. Very cool to be able to click on a method and see at what times it made an impact. As I said before, ANTS provides 43 different performance counters you can hook into.  Click the arrow next to the Performance tab at the top will allow you to change between different counters if you have them selected: Method Call Tree, ADO.Net Database Calls, File IO – Detail Panel Red Gate really hit the mark here I think. When you select a section of the run with the graph, the call tree populates to fill a hierarchical tree of method calls, with information regarding each of the methods.   By default, methods are hidden where the source is not provided (framework type code), however, Red Gate has integrated Reflector into ANTS, so even if you don’t have source for something, you can select a method and get the source if you want.  Methods are also hidden where the impact is seen as insignificant – methods that are only executed for 1% of the time of the overall calling methods time; in other words, working on making them better is not where your efforts should be focused. – Smart! Source Panel – Detail Panel The source panel is where you can see line level information on your code, showing the code for the currently selected method from the Method Call Tree.  If the code is not available, Reflector takes care of it and shows the code anyways! As you can notice, there does seem to be a problem with how ANTS determines what line is the actual line that a call is completed on.  I have suspicions that this may be due to some of the inline code optimizations that the CLR applies upon compilation of the assembly.  In a method with comments, the problem is much more severe: As you can see here, apparently the most offending code in my base library was a comment – *gasp*!  Removing the comments does help quite a bit, however I hope that Red Gate works on their counter algorithm soon to improve the logic on positioning for statistics: I did a small test just to demonstrate the lines are correct without comments. For me, it isn’t a deal breaker, as I can usually determine the correct placements by looking at the application code in the region and determining what makes sense, but it is something that would probably build up some irritation with time. Feature – Suggest Method for Optimization A neat feature to really help those in need of a pointer, is the menu option under tools to automatically suggest methods to optimize/improve: Nice feature – clicking it filters the call tree and stars methods that it thinks are good candidates for optimization.  I do wish that they would have made it more visible for those of use who aren’t great on sight: Process Integration I do think that this could have a place in my process.  After experimenting with the profiler, I do think it would be a great benefit to do some development, testing, and then after all the bugs are worked out, use the profiler to check on things to make sure nothing seems like it is hogging more than its fair share.  For example, with this program, I would have developed it, ran it, tested it – it works, but slowly. After looking at the profiler, and seeing the massive amount of time spent in 1 method, I might go ahead and try to re-implement IPrimes (I actually would probably rewrite the offending code, but so that I can distribute both sets of code easily, I’m just going to make another implementation of IPrimes).  Using two pieces of knowledge about prime numbers can make this method MUCH more efficient – prime numbers fall into two buckets 6k+/-1 , and a number is prime if it is not divisible by any other primes before it: public class SmartPrimes : IPrimes { public IEnumerable<int> GetPrimes(int retrieve) { //store a list of primes already found var _foundPrimes = new List<int>() { 2, 3 }; //if i ask for 1 or two primes, return what asked for if (retrieve <= _foundPrimes.Count()) return _foundPrimes.Take(retrieve); //the next number to look at int _k = 1; //since I already determined I don't have enough //execute at least once, and until quantity is sufficed do { //assume prime until otherwise determined bool isPrime = true; int potentialPrime; //analyze 6k-1 //assign the value to potential potentialPrime = 6 * _k - 1; //if there are any primes that divise this, it is NOT a prime number //using PLINQ for quick boost isPrime = !_foundPrimes.AsParallel() .Any(prime => potentialPrime % prime == 0); //if it is prime, add to found list if (isPrime) _foundPrimes.Add(potentialPrime); if (_foundPrimes.Count() == retrieve) break; //analyze 6k+1 //assign the value to potential potentialPrime = 6 * _k + 1; //if there are any primes that divise this, it is NOT a prime number //using PLINQ for quick boost isPrime = !_foundPrimes.AsParallel() .Any(prime => potentialPrime % prime == 0); //if it is prime, add to found list if (isPrime) _foundPrimes.Add(potentialPrime); //increment k to analyze next _k++; } while (_foundPrimes.Count() < retrieve); return _foundPrimes; } } Now there are definitely more things I can do to help make this more efficient, but for the scope of this example, I think this is fine (but still hideous)! Profiling this now yields a happy surprise 27 seconds to generate the 15000 primes with the profiler attached, and only 1.43 seconds without.  One important thing I wanted to call out though was the performance graph now: Notice anything odd?  The %Processor time is above 100%.  This is because there is now more than 1 core in the operation.  A better label for the chart in my mind would have been %Core time, but to each their own. Another odd thing I noticed was that the profiler seemed to be spot on this time in my DumbPrimes class with line details in source, even with comments..  Odd. Profiling Web Applications The last thing that I wanted to cover, that means a lot to me as a web developer, is the great amount of work that Red Gate put into the profiler when profiling web applications.  In my solution, I have a simple MVC4 application setup with 1 page, a single input form, that will output prime values as my WPF app did.  Launching the profiler from Visual Studio as before, nothing is really different in the profiler window, however I did receive a UAC prompt for a Red Gate helper app to integrate with the web server without notification. After requesting 500, 1000, 2000, and 5000 primes, and looking at the profiler session, things are slightly different from before: As you can see, there are 4 spikes of activity in the processor time graph, but there is also something new in the call tree: That’s right – ANTS will actually group method calls by get/post operations, so it is easier to find out what action/page is giving the largest problems…  Pretty cool in my mind! Overview Overall, I think that Red Gate ANTS CLR Profiler has a lot to offer, however I think it also has a long ways to go.  3 Biggest Pros: Ability to easily drill down from time graph, to method calls, to source code Wide variety of counters to choose from when profiling your application Excellent integration/grouping of methods being called from web applications by request – BRILLIANT! 3 Biggest Cons: Issue regarding line details in source view Nit pick – Processor time vs. Core time Nit pick – Lack of full integration with Visual Studio Ratings Ease of Use (7/10) – I marked down here because of the problems with the line level details and the extra work that that entails, and the lack of better integration with Visual Studio. Effectiveness (10/10) – I believe that the profiler does EXACTLY what it purports to do.  Especially with its large variety of performance counters, a definite plus! Features (9/10) – Besides the real time performance monitoring, and the drill downs that I’ve shown here, ANTS also has great integration with ADO.Net, with the ability to show database queries run by your application in the profiler.  This, with the line level details, the web request grouping, reflector integration, and various options to customize your profiling session I think create a great set of features! Customer Service (10/10) – My entire experience with Red Gate personnel has been nothing but good.  their people are friendly, helpful, and happy! UI / UX (8/10) – The interface is very easy to get around, and all of the options are easy to find.  With a little bit of poking around, you’ll be optimizing Hello World in no time flat! Overall (8/10) – Overall, I am happy with the Performance Profiler and its features, as well as with the service I received when working with the Red Gate personnel.  I WOULD recommend you trying the application and seeing if it would fit into your process, BUT, remember there are still some kinks in it to hopefully be worked out. My next post will definitely be shorter (hopefully), but thank you for reading up to here, or skipping ahead!  Please, if you do try the product, drop me a message and let me know what you think!  I would love to hear any opinions you may have on the product. Code Feel free to download the code I used above – download via DropBox

  Read the article

• ASP.NET MVC 2 Model Binding for a Collection

  - by nmarun

  Yes, my yet another post on Model Binding (previous one is here), but this one uses features presented in MVC 2. How I got to writing this blog? Well, I’m on a project where we’re doing some MVC things for a shopping cart. Let me show you what I was working with. Below are my model classes: 1: public class Product 2: { 3: public int Id { get; set; } 4: public string Name { get; set; } 5: public int Quantity { get; set; } 6: public decimal UnitPrice { get; set; } 7: } 8:   9: public class Totals 10: { 11: public decimal SubTotal { get; set; } 12: public decimal Tax { get; set; } 13: public decimal Total { get; set; } 14: } 15:   16: public class Basket 17: { 18: public List<Product> Products { get; set; } 19: public Totals Totals { get; set;} 20: } The view looks as below:  1: <h2>Shopping Cart</h2> 2:   3: <% using(Html.BeginForm()) { %> 4: 5: <h3>Products</h3> 6: <% for (int i = 0; i < Model.Products.Count; i++) 7: { %> 8: <div style="width: 100px;float:left;">Id</div> 9: <div style="width: 100px;float:left;"> 10: <%= Html.TextBox("ID", Model.Products[i].Id) %> 11: </div> 12: <div style="clear:both;"></div> 13: <div style="width: 100px;float:left;">Name</div> 14: <div style="width: 100px;float:left;"> 15: <%= Html.TextBox("Name", Model.Products[i].Name) %> 16: </div> 17: <div style="clear:both;"></div> 18: <div style="width: 100px;float:left;">Quantity</div> 19: <div style="width: 100px;float:left;"> 20: <%= Html.TextBox("Quantity", Model.Products[i].Quantity)%> 21: </div> 22: <div style="clear:both;"></div> 23: <div style="width: 100px;float:left;">Unit Price</div> 24: <div style="width: 100px;float:left;"> 25: <%= Html.TextBox("UnitPrice", Model.Products[i].UnitPrice)%> 26: </div> 27: <div style="clear:both;"><hr /></div> 28: <% } %> 29: 30: <h3>Totals</h3> 31: <div style="width: 100px;float:left;">Sub Total</div> 32: <div style="width: 100px;float:left;"> 33: <%= Html.TextBox("SubTotal", Model.Totals.SubTotal)%> 34: </div> 35: <div style="clear:both;"></div> 36: <div style="width: 100px;float:left;">Tax</div> 37: <div style="width: 100px;float:left;"> 38: <%= Html.TextBox("Tax", Model.Totals.Tax)%> 39: </div> 40: <div style="clear:both;"></div> 41: <div style="width: 100px;float:left;">Total</div> 42: <div style="width: 100px;float:left;"> 43: <%= Html.TextBox("Total", Model.Totals.Total)%> 44: </div> 45: <div style="clear:both;"></div> 46: <p /> 47: <input type="submit" name="Submit" value="Submit" /> 48: <% } %> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Nothing fancy, just a bunch of div’s containing textboxes and a submit button. Just make note that the textboxes have the same name as the property they are going to display. Yea, yea, I know. I’m displaying unit price as a textbox instead of a label, but that’s beside the point (and trust me, this will not be how it’ll look on the production site!!). The way my controller works is that initially two dummy products are added to the basked object and the Totals are calculated based on what products were added in what quantities and their respective unit price. So when the page loads in edit mode, where the user can change the quantity and hit the submit button. In the ‘post’ version of the action method, the Totals get recalculated and the new total will be displayed on the screen. Here’s the code: 1: public ActionResult Index() 2: { 3: Product product1 = new Product 4: { 5: Id = 1, 6: Name = "Product 1", 7: Quantity = 2, 8: UnitPrice = 200m 9: }; 10:   11: Product product2 = new Product 12: { 13: Id = 2, 14: Name = "Product 2", 15: Quantity = 1, 16: UnitPrice = 150m 17: }; 18:   19: List<Product> products = new List<Product> { product1, product2 }; 20:   21: Basket basket = new Basket 22: { 23: Products = products, 24: Totals = ComputeTotals(products) 25: }; 26: return View(basket); 27: } 28:   29: [HttpPost] 30: public ActionResult Index(Basket basket) 31: { 32: basket.Totals = ComputeTotals(basket.Products); 33: return View(basket); 34: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } That’s that. Now I run the app, I see two products with the totals section below them. I look at the view source and I see that the input controls have the right ID, the right name and the right value as well. 1: <input id="ID" name="ID" type="text" value="1" /> 2: <input id="Name" name="Name" type="text" value="Product 1" /> 3: ... 4: <input id="ID" name="ID" type="text" value="2" /> 5: <input id="Name" name="Name" type="text" value="Product 2" /> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } So just as a regular user would do, I change the quantity value of one of the products and hit the submit button. The ‘post’ version of the Index method gets called and I had put a break-point on line 32 in the above snippet. When I hovered my mouse on the ‘basked’ object, happily assuming that the object would be all bound and ready for use, I was surprised to see both basket.Products and basket.Totals were null. Huh? A little research and I found out that the reason the DefaultModelBinder could not do its job is because of a naming mismatch on the input controls. What I mean is that when you have to bind to a custom .net type, you need more than just the property name. You need to pass a qualified name to the name property of the input control. I modified my view and the emitted code looked as below: 1: <input id="Product_Name" name="Product.Name" type="text" value="Product 1" /> 2: ... 3: <input id="Product_Name" name="Product.Name" type="text" value="Product 2" /> 4: ... 5: <input id="Totals_SubTotal" name="Totals.SubTotal" type="text" value="550" /> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Now, I update the quantity and hit the submit button and I see that the Totals object is populated, but the Products list is still null. Once again I went: ‘Hmm.. time for more research’. I found out that the way to do this is to provide the name as: 1: <%= Html.TextBox(string.Format("Products[{0}].ID", i), Model.Products[i].Id) %> 2: <!-- this will be rendered as --> 3: <input id="Products_0__ID" name="Products[0].ID" type="text" value="1" /> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } It was only now that I was able to see both the products and the totals being properly bound in the ‘post’ action method. Somehow, I feel this is kinda ‘clunky’ way of doing things. Seems like people at MS felt in a similar way and offered us a much cleaner way to solve this issue. The simple solution is that instead of using a Textbox, we can either use a TextboxFor or an EditorFor helper method. This one directly spits out the name of the input property as ‘Products[0].ID and so on. Cool right? I totally fell for this and changed my UI to contain EditorFor helper method. At this point, I ran the application, changed the quantity field and pressed the submit button. Of course my basket object parameter in my action method was correctly bound after these changes. I let the app complete the rest of the lines in the action method. When the page finally rendered, I did see that the quantity was changed to what I entered before the post. But, wait a minute, the totals section did not reflect the changes and showed the old values. My status: COMPLETELY PUZZLED! Just to recap, this is what my ‘post’ Index method looked like: 1: [HttpPost] 2: public ActionResult Index(Basket basket) 3: { 4: basket.Totals = ComputeTotals(basket.Products); 5: return View(basket); 6: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } A careful debug confirmed that the basked.Products[0].Quantity showed the updated value and the ComputeTotals() method also returns the correct totals. But still when I passed this basket object, it ended up showing the old totals values only. I began playing a bit with the code and my first guess was that the input controls got their values from the ModelState object. For those who don’t know, the ModelState is a temporary storage area that ASP.NET MVC uses to retain incoming attempted values plus binding and validation errors. Also, the fact that input controls populate the values using data taken from: Previously attempted values recorded in the ModelState["name"].Value.AttemptedValue Explicitly provided value (<%= Html.TextBox("name", "Some value") %>) ViewData, by calling ViewData.Eval("name") FYI: ViewData dictionary takes precedence over ViewData's Model properties – read more here. These two indicators led to my guess. It took me quite some time, but finally I hit this post where Brad brilliantly explains why this is the preferred behavior. My guess was right and I, accordingly modified my code to reflect the following way: 1: [HttpPost] 2: public ActionResult Index(Basket basket) 3: { 4: // read the following posts to see why the ModelState 5: // needs to be cleared before passing it the view 6: // http://forums.asp.net/t/1535846.aspx 7: // http://forums.asp.net/p/1527149/3687407.aspx 8: if (ModelState.IsValid) 9: { 10: ModelState.Clear(); 11: } 12:   13: basket.Totals = ComputeTotals(basket.Products); 14: return View(basket); 15: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } What this does is that in the case where your ModelState IS valid, it clears the dictionary. This enables the values to be read from the model directly and not from the ModelState. So the verdict is this: If you need to pass other parameters (like html attributes and the like) to your input control, use 1: <%= Html.TextBox(string.Format("Products[{0}].ID", i), Model.Products[i].Id) %> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Since, in EditorFor, there is no direct and simple way of passing this information to the input control. If you don’t have to pass any such ‘extra’ piece of information to the control, then go the EditorFor way. The code used in the post can be found here.

  Read the article

• Java Cloud Service Integration to REST Service

  - by Jani Rautiainen

  Service (JCS) provides a platform to develop and deploy business applications in the cloud. In Fusion Applications Cloud deployments customers do not have the option to deploy custom applications developed with JDeveloper to ensure the integrity and supportability of the hosted application service. Instead the custom applications can be deployed to the JCS and integrated to the Fusion Application Cloud instance. This series of articles will go through the features of JCS, provide end-to-end examples on how to develop and deploy applications on JCS and how to integrate them with the Fusion Applications instance. In this article a custom application integrating with REST service will be implemented. We will use REST services provided by Taleo as an example; however the same approach will work with any REST service. In this example the data from the REST service is used to populate a dynamic table. Pre-requisites Access to Cloud instance In order to deploy the application access to a JCS instance is needed, a free trial JCS instance can be obtained from Oracle Cloud site. To register you will need a credit card even if the credit card will not be charged. To register simply click "Try it" and choose the "Java" option. The confirmation email will contain the connection details. See this video for example of the registration.Once the request is processed you will be assigned 2 service instances; Java and Database. Applications deployed to the JCS must use Oracle Database Cloud Service as their underlying database. So when JCS instance is created a database instance is associated with it using a JDBC data source.The cloud services can be monitored and managed through the web UI. For details refer to Getting Started with Oracle Cloud. JDeveloper JDeveloper contains Cloud specific features related to e.g. connection and deployment. To use these features download the JDeveloper from JDeveloper download site by clicking the "Download JDeveloper 11.1.1.7.1 for ADF deployment on Oracle Cloud" link, this version of JDeveloper will have the JCS integration features that will be used in this article. For versions that do not include the Cloud integration features the Oracle Java Cloud Service SDK or the JCS Java Console can be used for deployment. For details on installing and configuring the JDeveloper refer to the installation guideFor details on SDK refer to Using the Command-Line Interface to Monitor Oracle Java Cloud Service and Using the Command-Line Interface to Manage Oracle Java Cloud Service. Access to a local database The database associated with the JCS instance cannot be connected to with JDBC.  Since creating ADFbc business component requires a JDBC connection we will need access to a local database. 3rd party libraries This example will use some 3rd party libraries for implementing the REST service call and processing the input / output content. Other libraries may also be used, however these are tested to work. Jersey 1.x Jersey library will be used as a client to make the call to the REST service. JCS documentation for supported specifications states: Java API for RESTful Web Services (JAX-RS) 1.1 So Jersey 1.x will be used. Download the single-JAR Jersey bundle; in this example Jersey 1.18 JAR bundle is used. Json-simple Jjson-simple library will be used to process the json objects. Download the  JAR file; in this example json-simple-1.1.1.jar is used. Accessing data in Taleo Before implementing the application it is beneficial to familiarize oneself with the data in Taleo. Easiest way to do this is by using a RESTClient on your browser. Once added to the browser you can access the UI: The client can be used to call the REST services to test the URLs and data before adding them into the application. First derive the base URL for the service this can be done with: Method: GET URL: https://tbe.taleo.net/MANAGER/dispatcher/api/v1/serviceUrl/<company name> The response will contain the base URL to be used for the service calls for the company. Next obtain authentication token with: Method: POST URL: https://ch.tbe.taleo.net/CH07/ats/api/v1/login?orgCode=<company>&userName=<user name>&password=<password> The response includes an authentication token that can be used for few hours to authenticate with the service: {   "response": {     "authToken": "webapi26419680747505890557"   },   "status": {     "detail": {},     "success": true   } } To authenticate the service calls navigate to "Headers -> Custom Header": And add a new request header with: Name: Cookie Value: authToken=webapi26419680747505890557 Once authentication token is defined the tool can be used to invoke REST services; for example: Method: GET URL: https://ch.tbe.taleo.net/CH07/ats/api/v1/object/candidate/search.xml?status=16 This data will be used on the application to be created. For details on the Taleo REST services refer to the Taleo Business Edition REST API Guide. Create Application First Fusion Web Application is created and configured. Start JDeveloper and click "New Application": Application Name: JcsRestDemo Application Package Prefix: oracle.apps.jcs.test Application Template: Fusion Web Application (ADF) Configure Local Cloud Connection Follow the steps documented in the "Java Cloud Service ADF Web Application" article to configure a local database connection needed to create the ADFbc objects. Configure Libraries Add the 3rd party libraries into the class path. Create the following directory and copy the jar files into it: <JDEV_USER_HOME>/JcsRestDemo/lib  Select the "Model" project, navigate "Application -> Project Properties -> Libraries and Classpath -> Add JAR / Directory" and add the 2 3rd party libraries: Accessing Data from Taleo To access data from Taleo using the REST service the 3rd party libraries will be used. 2 Java classes are implemented, one representing the Candidate object and another for accessing the Taleo repository Candidate Candidate object is a POJO object used to represent the candidate data obtained from the Taleo repository. The data obtained will be used to populate the ADFbc object used to display the data on the UI. The candidate object contains simply the variables we obtain using the REST services and the getters / setters for them: Navigate "New -> General -> Java -> Java Class", enter "Candidate" as the name and create it in the package "oracle.apps.jcs.test.model".  Copy / paste the following as the content: import oracle.jbo.domain.Number; public class Candidate { private Number candId; private String firstName; private String lastName; public Candidate() { super(); } public Candidate(Number candId, String firstName, String lastName) { super(); this.candId = candId; this.firstName = firstName; this.lastName = lastName; } public void setCandId(Number candId) { this.candId = candId; } public Number getCandId() { return candId; } public void setFirstName(String firstName) { this.firstName = firstName; } public String getFirstName() { return firstName; } public void setLastName(String lastName) { this.lastName = lastName; } public String getLastName() { return lastName; } } Taleo Repository Taleo repository class will interact with the Taleo REST services. The logic will query data from Taleo and populate Candidate objects with the data. The Candidate object will then be used to populate the ADFbc object used to display data on the UI. Navigate "New -> General -> Java -> Java Class", enter "TaleoRepository" as the name and create it in the package "oracle.apps.jcs.test.model".  Copy / paste the following as the content (for details of the implementation refer to the documentation in the code): import com.sun.jersey.api.client.Client; import com.sun.jersey.api.client.ClientResponse; import com.sun.jersey.api.client.WebResource; import com.sun.jersey.core.util.MultivaluedMapImpl; import java.io.StringReader; import java.util.ArrayList; import java.util.Iterator; import java.util.List; import java.util.Map; import javax.ws.rs.core.MediaType; import javax.ws.rs.core.MultivaluedMap; import oracle.jbo.domain.Number; import org.json.simple.JSONArray; import org.json.simple.JSONObject; import org.json.simple.parser.JSONParser; /** * This class interacts with the Taleo REST services */ public class TaleoRepository { /** * Connection information needed to access the Taleo services */ String _company = null; String _userName = null; String _password = null; /** * Jersey client used to access the REST services */ Client _client = null; /** * Parser for processing the JSON objects used as * input / output for the services */ JSONParser _parser = null; /** * The base url for constructing the REST URLs. This is obtained * from Taleo with a service call */ String _baseUrl = null; /** * Authentication token obtained from Taleo using a service call. * The token can be used to authenticate on subsequent * service calls. The token will expire in 4 hours */ String _authToken = null; /** * Static url that can be used to obtain the url used to construct * service calls for a given company */ private static String _taleoUrl = "https://tbe.taleo.net/MANAGER/dispatcher/api/v1/serviceUrl/"; /** * Default constructor for the repository * Authentication details are passed as parameters and used to generate * authentication token. Note that each service call will * generate its own token. This is done to avoid dealing with the expiry * of the token. Also only 20 tokens are allowed per user simultaneously. * So instead for each call there is login / logout. * * @param company the company for which the service calls are made * @param userName the user name to authenticate with * @param password the password to authenticate with. */ public TaleoRepository(String company, String userName, String password) { super(); _company = company; _userName = userName; _password = password; _client = Client.create(); _parser = new JSONParser(); _baseUrl = getBaseUrl(); } /** * This obtains the base url for a company to be used * to construct the urls for service calls * @return base url for the service calls */ private String getBaseUrl() { String result = null; if (null != _baseUrl) { result = _baseUrl; } else { try { String company = _company; WebResource resource = _client.resource(_taleoUrl + company); ClientResponse response = resource.type(MediaType.APPLICATION_FORM_URLENCODED_TYPE).get(ClientResponse.class); String entity = response.getEntity(String.class); JSONObject jsonObject = (JSONObject)_parser.parse(new StringReader(entity)); JSONObject jsonResponse = (JSONObject)jsonObject.get("response"); result = (String)jsonResponse.get("URL"); } catch (Exception ex) { ex.printStackTrace(); } } return result; } /** * Generates authentication token, that can be used to authenticate on * subsequent service calls. Note that each service call will * generate its own token. This is done to avoid dealing with the expiry * of the token. Also only 20 tokens are allowed per user simultaneously. * So instead for each call there is login / logout. * @return authentication token that can be used to authenticate on * subsequent service calls */ private String login() { String result = null; try { MultivaluedMap<String, String> formData = new MultivaluedMapImpl(); formData.add("orgCode", _company); formData.add("userName", _userName); formData.add("password", _password); WebResource resource = _client.resource(_baseUrl + "login"); ClientResponse response = resource.type(MediaType.APPLICATION_FORM_URLENCODED_TYPE).post(ClientResponse.class, formData); String entity = response.getEntity(String.class); JSONObject jsonObject = (JSONObject)_parser.parse(new StringReader(entity)); JSONObject jsonResponse = (JSONObject)jsonObject.get("response"); result = (String)jsonResponse.get("authToken"); } catch (Exception ex) { throw new RuntimeException("Unable to login ", ex); } if (null == result) throw new RuntimeException("Unable to login "); return result; } /** * Releases a authentication token. Each call to login must be followed * by call to logout after the processing is done. This is required as * the tokens are limited to 20 per user and if not released the tokens * will only expire after 4 hours. * @param authToken */ private void logout(String authToken) { WebResource resource = _client.resource(_baseUrl + "logout"); resource.header("cookie", "authToken=" + authToken).post(ClientResponse.class); } /** * This method is used to obtain a list of candidates using a REST * service call. At this example the query is hard coded to query * based on status. The url constructed to access the service is: * <_baseUrl>/object/candidate/search.xml?status=16 * @return List of candidates obtained with the service call */ public List<Candidate> getCandidates() { List<Candidate> result = new ArrayList<Candidate>(); try { // First login, note that in finally block we must have logout _authToken = "authToken=" + login(); /** * Construct the URL, the resulting url will be: * <_baseUrl>/object/candidate/search.xml?status=16 */ MultivaluedMap<String, String> formData = new MultivaluedMapImpl(); formData.add("status", "16"); JSONArray searchResults = (JSONArray)getTaleoResource("object/candidate/search", "searchResults", formData); /** * Process the results, the resulting JSON object is something like * this (simplified for readability): * * { * "response": * { * "searchResults": * [ * { * "candidate": * { * "candId": 211, * "firstName": "Mary", * "lastName": "Stochi", * logic here will find the candidate object(s), obtain the desired * data from them, construct a Candidate object based on the data * and add it to the results. */ for (Object object : searchResults) { JSONObject temp = (JSONObject)object; JSONObject candidate = (JSONObject)findObject(temp, "candidate"); Long candIdTemp = (Long)candidate.get("candId"); Number candId = (null == candIdTemp ? null : new Number(candIdTemp)); String firstName = (String)candidate.get("firstName"); String lastName = (String)candidate.get("lastName"); result.add(new Candidate(candId, firstName, lastName)); } } catch (Exception ex) { ex.printStackTrace(); } finally { if (null != _authToken) logout(_authToken); } return result; } /** * Convenience method to construct url for the service call, invoke the * service and obtain a resource from the response * @param path the path for the service to be invoked. This is combined * with the base url to construct a url for the service * @param resource the key for the object in the response that will be * obtained * @param parameters any parameters used for the service call. The call * is slightly different depending whether parameters exist or not. * @return the resource from the response for the service call */ private Object getTaleoResource(String path, String resource, MultivaluedMap<String, String> parameters) { Object result = null; try { WebResource webResource = _client.resource(_baseUrl + path); ClientResponse response = null; if (null == parameters) response = webResource.header("cookie", _authToken).get(ClientResponse.class); else response = webResource.queryParams(parameters).header("cookie", _authToken).get(ClientResponse.class); String entity = response.getEntity(String.class); JSONObject jsonObject = (JSONObject)_parser.parse(new StringReader(entity)); result = findObject(jsonObject, resource); } catch (Exception ex) { ex.printStackTrace(); } return result; } /** * Convenience method to recursively find a object with an key * traversing down from a given root object. This will traverse a * JSONObject / JSONArray recursively to find a matching key, if found * the object with the key is returned. * @param root root object which contains the key searched for * @param key the key for the object to search for * @return the object matching the key */ private Object findObject(Object root, String key) { Object result = null; if (root instanceof JSONObject) { JSONObject rootJSON = (JSONObject)root; if (rootJSON.containsKey(key)) { result = rootJSON.get(key); } else { Iterator children = rootJSON.entrySet().iterator(); while (children.hasNext()) { Map.Entry entry = (Map.Entry)children.next(); Object child = entry.getValue(); if (child instanceof JSONObject || child instanceof JSONArray) { result = findObject(child, key); if (null != result) break; } } } } else if (root instanceof JSONArray) { JSONArray rootJSON = (JSONArray)root; for (Object child : rootJSON) { if (child instanceof JSONObject || child instanceof JSONArray) { result = findObject(child, key); if (null != result) break; } } } return result; } }   Creating Business Objects While JCS application can be created without a local database, the local database is required when using ADFbc objects even if database objects are not referred. For this example we will create a "Transient" view object that will be programmatically populated based the data obtained from Taleo REST services. Creating ADFbc objects Choose the "Model" project and navigate "New -> Business Tier : ADF Business Components : View Object". On the "Initialize Business Components Project" choose the local database connection created in previous step. On Step 1 enter "JcsRestDemoVO" on the "Name" and choose "Rows populated programmatically, not based on query": On step 2 create the following attributes: CandId Type: Number Updatable: Always Key Attribute: checked Name Type: String Updatable: Always On steps 3 and 4 accept defaults and click "Next".  On step 5 check the "Application Module" checkbox and enter "JcsRestDemoAM" as the name: Click "Finish" to generate the objects. Populating the VO To display the data on the UI the "transient VO" is populated programmatically based on the data obtained from the Taleo REST services. Open the "JcsRestDemoVOImpl.java". Copy / paste the following as the content (for details of the implementation refer to the documentation in the code): import java.sql.ResultSet; import java.util.List; import java.util.ListIterator; import oracle.jbo.server.ViewObjectImpl; import oracle.jbo.server.ViewRowImpl; import oracle.jbo.server.ViewRowSetImpl; // --------------------------------------------------------------------- // --- File generated by Oracle ADF Business Components Design Time. // --- Tue Feb 18 09:40:25 PST 2014 // --- Custom code may be added to this class. // --- Warning: Do not modify method signatures of generated methods. // --------------------------------------------------------------------- public class JcsRestDemoVOImpl extends ViewObjectImpl { /** * This is the default constructor (do not remove). */ public JcsRestDemoVOImpl() { } @Override public void executeQuery() { /** * For some reason we need to reset everything, otherwise * 2nd entry to the UI screen may fail with * "java.util.NoSuchElementException" in createRowFromResultSet * call to "candidates.next()". I am not sure why this is happening * as the Iterator is new and "hasNext" is true at the point * of the execution. My theory is that since the iterator object is * exactly the same the VO cache somehow reuses the iterator including * the pointer that has already exhausted the iterable elements on the * previous run. Working around the issue * here by cleaning out everything on the VO every time before query * is executed on the VO. */ getViewDef().setQuery(null); getViewDef().setSelectClause(null); setQuery(null); this.reset(); this.clearCache(); super.executeQuery(); } /** * executeQueryForCollection - overridden for custom java data source support. */ protected void executeQueryForCollection(Object qc, Object[] params, int noUserParams) { /** * Integrate with the Taleo REST services using TaleoRepository class. * A list of candidates matching a hard coded query is obtained. */ TaleoRepository repository = new TaleoRepository(<company>, <username>, <password>); List<Candidate> candidates = repository.getCandidates(); /** * Store iterator for the candidates as user data on the collection. * This will be used in createRowFromResultSet to create rows based on * the custom iterator. */ ListIterator<Candidate> candidatescIterator = candidates.listIterator(); setUserDataForCollection(qc, candidatescIterator); super.executeQueryForCollection(qc, params, noUserParams); } /** * hasNextForCollection - overridden for custom java data source support. */ protected boolean hasNextForCollection(Object qc) { boolean result = false; /** * Determines whether there are candidates for which to create a row */ ListIterator<Candidate> candidates = (ListIterator<Candidate>)getUserDataForCollection(qc); result = candidates.hasNext(); /** * If all candidates to be created indicate that processing is done */ if (!result) { setFetchCompleteForCollection(qc, true); } return result; } /** * createRowFromResultSet - overridden for custom java data source support. */ protected ViewRowImpl createRowFromResultSet(Object qc, ResultSet resultSet) { /** * Obtain the next candidate from the collection and create a row * for it. */ ListIterator<Candidate> candidates = (ListIterator<Candidate>)getUserDataForCollection(qc); ViewRowImpl row = createNewRowForCollection(qc); try { Candidate candidate = candidates.next(); row.setAttribute("CandId", candidate.getCandId()); row.setAttribute("Name", candidate.getFirstName() + " " + candidate.getLastName()); } catch (Exception e) { e.printStackTrace(); } return row; } /** * getQueryHitCount - overridden for custom java data source support. */ public long getQueryHitCount(ViewRowSetImpl viewRowSet) { /** * For this example this is not implemented rather we always return 0. */ return 0; } } Creating UI Choose the "ViewController" project and navigate "New -> Web Tier : JSF : JSF Page". On the "Create JSF Page" enter "JcsRestDemo" as name and ensure that the "Create as XML document (*.jspx)" is checked.  Open "JcsRestDemo.jspx" and navigate to "Data Controls -> JcsRestDemoAMDataControl -> JcsRestDemoVO1" and drag & drop the VO to the "<af:form> " as a "ADF Read-only Table": Accept the defaults in "Edit Table Columns". To execute the query navigate to to "Data Controls -> JcsRestDemoAMDataControl -> JcsRestDemoVO1 -> Operations -> Execute" and drag & drop the operation to the "<af:form> " as a "Button": Deploying to JCS Follow the same steps as documented in previous article"Java Cloud Service ADF Web Application". Once deployed the application can be accessed with URL: https://java-[identity domain].java.[data center].oraclecloudapps.com/JcsRestDemo-ViewController-context-root/faces/JcsRestDemo.jspx The UI displays a list of candidates obtained from the Taleo REST Services: Summary In this article we learned how to integrate with REST services using Jersey library in JCS. In future articles various other integration techniques will be covered.

  Read the article

• C#/.NET Little Wonders: The ConcurrentDictionary

  - by James Michael Hare

  Once again we consider some of the lesser known classes and keywords of C#.  In this series of posts, we will discuss how the concurrent collections have been developed to help alleviate these multi-threading concerns.  Last week’s post began with a general introduction and discussed the ConcurrentStack<T> and ConcurrentQueue<T>.  Today's post discusses the ConcurrentDictionary<T> (originally I had intended to discuss ConcurrentBag this week as well, but ConcurrentDictionary had enough information to create a very full post on its own!).  Finally next week, we shall close with a discussion of the ConcurrentBag<T> and BlockingCollection<T>. For more of the "Little Wonders" posts, see the index here. Recap As you'll recall from the previous post, the original collections were object-based containers that accomplished synchronization through a Synchronized member.  While these were convenient because you didn't have to worry about writing your own synchronization logic, they were a bit too finely grained and if you needed to perform multiple operations under one lock, the automatic synchronization didn't buy much. With the advent of .NET 2.0, the original collections were succeeded by the generic collections which are fully type-safe, but eschew automatic synchronization.  This cuts both ways in that you have a lot more control as a developer over when and how fine-grained you want to synchronize, but on the other hand if you just want simple synchronization it creates more work. With .NET 4.0, we get the best of both worlds in generic collections.  A new breed of collections was born called the concurrent collections in the System.Collections.Concurrent namespace.  These amazing collections are fine-tuned to have best overall performance for situations requiring concurrent access.  They are not meant to replace the generic collections, but to simply be an alternative to creating your own locking mechanisms. Among those concurrent collections were the ConcurrentStack<T> and ConcurrentQueue<T> which provide classic LIFO and FIFO collections with a concurrent twist.  As we saw, some of the traditional methods that required calls to be made in a certain order (like checking for not IsEmpty before calling Pop()) were replaced in favor of an umbrella operation that combined both under one lock (like TryPop()). Now, let's take a look at the next in our series of concurrent collections!For some excellent information on the performance of the concurrent collections and how they perform compared to a traditional brute-force locking strategy, see this wonderful whitepaper by the Microsoft Parallel Computing Platform team here. ConcurrentDictionary – the fully thread-safe dictionary The ConcurrentDictionary<TKey,TValue> is the thread-safe counterpart to the generic Dictionary<TKey, TValue> collection.  Obviously, both are designed for quick – O(1) – lookups of data based on a key.  If you think of algorithms where you need lightning fast lookups of data and don’t care whether the data is maintained in any particular ordering or not, the unsorted dictionaries are generally the best way to go. Note: as a side note, there are sorted implementations of IDictionary, namely SortedDictionary and SortedList which are stored as an ordered tree and a ordered list respectively.  While these are not as fast as the non-sorted dictionaries – they are O(log2 n) – they are a great combination of both speed and ordering -- and still greatly outperform a linear search. Now, once again keep in mind that if all you need to do is load a collection once and then allow multi-threaded reading you do not need any locking.  Examples of this tend to be situations where you load a lookup or translation table once at program start, then keep it in memory for read-only reference.  In such cases locking is completely non-productive. However, most of the time when we need a concurrent dictionary we are interleaving both reads and updates.  This is where the ConcurrentDictionary really shines!  It achieves its thread-safety with no common lock to improve efficiency.  It actually uses a series of locks to provide concurrent updates, and has lockless reads!  This means that the ConcurrentDictionary gets even more efficient the higher the ratio of reads-to-writes you have. ConcurrentDictionary and Dictionary differences For the most part, the ConcurrentDictionary<TKey,TValue> behaves like it’s Dictionary<TKey,TValue> counterpart with a few differences.  Some notable examples of which are: Add() does not exist in the concurrent dictionary. This means you must use TryAdd(), AddOrUpdate(), or GetOrAdd().  It also means that you can’t use a collection initializer with the concurrent dictionary. TryAdd() replaced Add() to attempt atomic, safe adds. Because Add() only succeeds if the item doesn’t already exist, we need an atomic operation to check if the item exists, and if not add it while still under an atomic lock. TryUpdate() was added to attempt atomic, safe updates. If we want to update an item, we must make sure it exists first and that the original value is what we expected it to be.  If all these are true, we can update the item under one atomic step. TryRemove() was added to attempt atomic, safe removes. To safely attempt to remove a value we need to see if the key exists first, this checks for existence and removes under an atomic lock. AddOrUpdate() was added to attempt an thread-safe “upsert”. There are many times where you want to insert into a dictionary if the key doesn’t exist, or update the value if it does.  This allows you to make a thread-safe add-or-update. GetOrAdd() was added to attempt an thread-safe query/insert. Sometimes, you want to query for whether an item exists in the cache, and if it doesn’t insert a starting value for it.  This allows you to get the value if it exists and insert if not. Count, Keys, Values properties take a snapshot of the dictionary. Accessing these properties may interfere with add and update performance and should be used with caution. ToArray() returns a static snapshot of the dictionary. That is, the dictionary is locked, and then copied to an array as a O(n) operation.  GetEnumerator() is thread-safe and efficient, but allows dirty reads. Because reads require no locking, you can safely iterate over the contents of the dictionary.  The only downside is that, depending on timing, you may get dirty reads. Dirty reads during iteration The last point on GetEnumerator() bears some explanation.  Picture a scenario in which you call GetEnumerator() (or iterate using a foreach, etc.) and then, during that iteration the dictionary gets updated.  This may not sound like a big deal, but it can lead to inconsistent results if used incorrectly.  The problem is that items you already iterated over that are updated a split second after don’t show the update, but items that you iterate over that were updated a split second before do show the update.  Thus you may get a combination of items that are “stale” because you iterated before the update, and “fresh” because they were updated after GetEnumerator() but before the iteration reached them. Let’s illustrate with an example, let’s say you load up a concurrent dictionary like this: 1: // load up a dictionary. 2: var dictionary = new ConcurrentDictionary<string, int>(); 3:  4: dictionary["A"] = 1; 5: dictionary["B"] = 2; 6: dictionary["C"] = 3; 7: dictionary["D"] = 4; 8: dictionary["E"] = 5; 9: dictionary["F"] = 6; Then you have one task (using the wonderful TPL!) to iterate using dirty reads: 1: // attempt iteration in a separate thread 2: var iterationTask = new Task(() => 3: { 4: // iterates using a dirty read 5: foreach (var pair in dictionary) 6: { 7: Console.WriteLine(pair.Key + ":" + pair.Value); 8: } 9: }); And one task to attempt updates in a separate thread (probably): 1: // attempt updates in a separate thread 2: var updateTask = new Task(() => 3: { 4: // iterates, and updates the value by one 5: foreach (var pair in dictionary) 6: { 7: dictionary[pair.Key] = pair.Value + 1; 8: } 9: }); Now that we’ve done this, we can fire up both tasks and wait for them to complete: 1: // start both tasks 2: updateTask.Start(); 3: iterationTask.Start(); 4:  5: // wait for both to complete. 6: Task.WaitAll(updateTask, iterationTask); Now, if I you didn’t know about the dirty reads, you may have expected to see the iteration before the updates (such as A:1, B:2, C:3, D:4, E:5, F:6).  However, because the reads are dirty, we will quite possibly get a combination of some updated, some original.  My own run netted this result: 1: F:6 2: E:6 3: D:5 4: C:4 5: B:3 6: A:2 Note that, of course, iteration is not in order because ConcurrentDictionary, like Dictionary, is unordered.  Also note that both E and F show the value 6.  This is because the output task reached F before the update, but the updates for the rest of the items occurred before their output (probably because console output is very slow, comparatively). If we want to always guarantee that we will get a consistent snapshot to iterate over (that is, at the point we ask for it we see precisely what is in the dictionary and no subsequent updates during iteration), we should iterate over a call to ToArray() instead: 1: // attempt iteration in a separate thread 2: var iterationTask = new Task(() => 3: { 4: // iterates using a dirty read 5: foreach (var pair in dictionary.ToArray()) 6: { 7: Console.WriteLine(pair.Key + ":" + pair.Value); 8: } 9: }); The atomic Try…() methods As you can imagine TryAdd() and TryRemove() have few surprises.  Both first check the existence of the item to determine if it can be added or removed based on whether or not the key currently exists in the dictionary: 1: // try add attempts an add and returns false if it already exists 2: if (dictionary.TryAdd("G", 7)) 3: Console.WriteLine("G did not exist, now inserted with 7"); 4: else 5: Console.WriteLine("G already existed, insert failed."); TryRemove() also has the virtue of returning the value portion of the removed entry matching the given key: 1: // attempt to remove the value, if it exists it is removed and the original is returned 2: int removedValue; 3: if (dictionary.TryRemove("C", out removedValue)) 4: Console.WriteLine("Removed C and its value was " + removedValue); 5: else 6: Console.WriteLine("C did not exist, remove failed."); Now TryUpdate() is an interesting creature.  You might think from it’s name that TryUpdate() first checks for an item’s existence, and then updates if the item exists, otherwise it returns false.  Well, note quite... It turns out when you call TryUpdate() on a concurrent dictionary, you pass it not only the new value you want it to have, but also the value you expected it to have before the update.  If the item exists in the dictionary, and it has the value you expected, it will update it to the new value atomically and return true.  If the item is not in the dictionary or does not have the value you expected, it is not modified and false is returned. 1: // attempt to update the value, if it exists and if it has the expected original value 2: if (dictionary.TryUpdate("G", 42, 7)) 3: Console.WriteLine("G existed and was 7, now it's 42."); 4: else 5: Console.WriteLine("G either didn't exist, or wasn't 7."); The composite Add methods The ConcurrentDictionary also has composite add methods that can be used to perform updates and gets, with an add if the item is not existing at the time of the update or get. The first of these, AddOrUpdate(), allows you to add a new item to the dictionary if it doesn’t exist, or update the existing item if it does.  For example, let’s say you are creating a dictionary of counts of stock ticker symbols you’ve subscribed to from a market data feed: 1: public sealed class SubscriptionManager 2: { 3: private readonly ConcurrentDictionary<string, int> _subscriptions = new ConcurrentDictionary<string, int>(); 4:  5: // adds a new subscription, or increments the count of the existing one. 6: public void AddSubscription(string tickerKey) 7: { 8: // add a new subscription with count of 1, or update existing count by 1 if exists 9: var resultCount = _subscriptions.AddOrUpdate(tickerKey, 1, (symbol, count) => count + 1); 10:  11: // now check the result to see if we just incremented the count, or inserted first count 12: if (resultCount == 1) 13: { 14: // subscribe to symbol... 15: } 16: } 17: } Notice the update value factory Func delegate.  If the key does not exist in the dictionary, the add value is used (in this case 1 representing the first subscription for this symbol), but if the key already exists, it passes the key and current value to the update delegate which computes the new value to be stored in the dictionary.  The return result of this operation is the value used (in our case: 1 if added, existing value + 1 if updated). Likewise, the GetOrAdd() allows you to attempt to retrieve a value from the dictionary, and if the value does not currently exist in the dictionary it will insert a value.  This can be handy in cases where perhaps you wish to cache data, and thus you would query the cache to see if the item exists, and if it doesn’t you would put the item into the cache for the first time: 1: public sealed class PriceCache 2: { 3: private readonly ConcurrentDictionary<string, double> _cache = new ConcurrentDictionary<string, double>(); 4:  5: // adds a new subscription, or increments the count of the existing one. 6: public double QueryPrice(string tickerKey) 7: { 8: // check for the price in the cache, if it doesn't exist it will call the delegate to create value. 9: return _cache.GetOrAdd(tickerKey, symbol => GetCurrentPrice(symbol)); 10: } 11:  12: private double GetCurrentPrice(string tickerKey) 13: { 14: // do code to calculate actual true price. 15: } 16: } There are other variations of these two methods which vary whether a value is provided or a factory delegate, but otherwise they work much the same. Oddities with the composite Add methods The AddOrUpdate() and GetOrAdd() methods are totally thread-safe, on this you may rely, but they are not atomic.  It is important to note that the methods that use delegates execute those delegates outside of the lock.  This was done intentionally so that a user delegate (of which the ConcurrentDictionary has no control of course) does not take too long and lock out other threads. This is not necessarily an issue, per se, but it is something you must consider in your design.  The main thing to consider is that your delegate may get called to generate an item, but that item may not be the one returned!  Consider this scenario: A calls GetOrAdd and sees that the key does not currently exist, so it calls the delegate.  Now thread B also calls GetOrAdd and also sees that the key does not currently exist, and for whatever reason in this race condition it’s delegate completes first and it adds its new value to the dictionary.  Now A is done and goes to get the lock, and now sees that the item now exists.  In this case even though it called the delegate to create the item, it will pitch it because an item arrived between the time it attempted to create one and it attempted to add it. Let’s illustrate, assume this totally contrived example program which has a dictionary of char to int.  And in this dictionary we want to store a char and it’s ordinal (that is, A = 1, B = 2, etc).  So for our value generator, we will simply increment the previous value in a thread-safe way (perhaps using Interlocked): 1: public static class Program 2: { 3: private static int _nextNumber = 0; 4:  5: // the holder of the char to ordinal 6: private static ConcurrentDictionary<char, int> _dictionary 7: = new ConcurrentDictionary<char, int>(); 8:  9: // get the next id value 10: public static int NextId 11: { 12: get { return Interlocked.Increment(ref _nextNumber); } 13: } Then, we add a method that will perform our insert: 1: public static void Inserter() 2: { 3: for (int i = 0; i < 26; i++) 4: { 5: _dictionary.GetOrAdd((char)('A' + i), key => NextId); 6: } 7: } Finally, we run our test by starting two tasks to do this work and get the results… 1: public static void Main() 2: { 3: // 3 tasks attempting to get/insert 4: var tasks = new List<Task> 5: { 6: new Task(Inserter), 7: new Task(Inserter) 8: }; 9:  10: tasks.ForEach(t => t.Start()); 11: Task.WaitAll(tasks.ToArray()); 12:  13: foreach (var pair in _dictionary.OrderBy(p => p.Key)) 14: { 15: Console.WriteLine(pair.Key + ":" + pair.Value); 16: } 17: } If you run this with only one task, you get the expected A:1, B:2, ..., Z:26.  But running this in parallel you will get something a bit more complex.  My run netted these results: 1: A:1 2: B:3 3: C:4 4: D:5 5: E:6 6: F:7 7: G:8 8: H:9 9: I:10 10: J:11 11: K:12 12: L:13 13: M:14 14: N:15 15: O:16 16: P:17 17: Q:18 18: R:19 19: S:20 20: T:21 21: U:22 22: V:23 23: W:24 24: X:25 25: Y:26 26: Z:27 Notice that B is 3?  This is most likely because both threads attempted to call GetOrAdd() at roughly the same time and both saw that B did not exist, thus they both called the generator and one thread got back 2 and the other got back 3.  However, only one of those threads can get the lock at a time for the actual insert, and thus the one that generated the 3 won and the 3 was inserted and the 2 got discarded.  This is why on these methods your factory delegates should be careful not to have any logic that would be unsafe if the value they generate will be pitched in favor of another item generated at roughly the same time.  As such, it is probably a good idea to keep those generators as stateless as possible. Summary The ConcurrentDictionary is a very efficient and thread-safe version of the Dictionary generic collection.  It has all the benefits of type-safety that it’s generic collection counterpart does, and in addition is extremely efficient especially when there are more reads than writes concurrently. Tweet Technorati Tags: C#, .NET, Concurrent Collections, Collections, Little Wonders, Black Rabbit Coder,James Michael Hare

  Read the article

• Much Ado About Nothing: Stub Objects

  - by user9154181

  The Solaris 11 link-editor (ld) contains support for a new type of object that we call a stub object. A stub object is a shared object, built entirely from mapfiles, that supplies the same linking interface as the real object, while containing no code or data. Stub objects cannot be executed — the runtime linker will kill any process that attempts to load one. However, you can link to a stub object as a dependency, allowing the stub to act as a proxy for the real version of the object. You may well wonder if there is a point to producing an object that contains nothing but linking interface. As it turns out, stub objects are very useful for building large bodies of code such as Solaris. In the last year, we've had considerable success in applying them to one of our oldest and thorniest build problems. In this discussion, I will describe how we came to invent these objects, and how we apply them to building Solaris. This posting explains where the idea for stub objects came from, and details our long and twisty journey from hallway idea to standard link-editor feature. I expect that these details are mainly of interest to those who work on Solaris and its makefiles, those who have done so in the past, and those who work with other similar bodies of code. A subsequent posting will omit the history and background details, and instead discuss how to build and use stub objects. If you are mainly interested in what stub objects are, and don't care about the underlying software war stories, I encourage you to skip ahead. The Long Road To Stubs This all started for me with an email discussion in May of 2008, regarding a change request that was filed in 2002, entitled: 4631488 lib/Makefile is too patient: .WAITs should be reduced This CR encapsulates a number of cronic issues with Solaris builds: We build Solaris with a parallel make (dmake) that tries to build as much of the code base in parallel as possible. There is a lot of code to build, and we've long made use of parallelized builds to get the job done quicker. This is even more important in today's world of massively multicore hardware. Solaris contains a large number of executables and shared objects. Executables depend on shared objects, and shared objects can depend on each other. Before you can build an object, you need to ensure that the objects it needs have been built. This implies a need for serialization, which is in direct opposition to the desire to build everying in parallel. To accurately build objects in the right order requires an accurate set of make rules defining the things that depend on each other. This sounds simple, but the reality is quite complex. In practice, having programmers explicitly specify these dependencies is a losing strategy: It's really hard to get right. It's really easy to get it wrong and never know it because things build anyway. Even if you get it right, it won't stay that way, because dependencies between objects can change over time, and make cannot help you detect such drifing. You won't know that you got it wrong until the builds break. That can be a long time after the change that triggered the breakage happened, making it hard to connect the cause and the effect. Usually this happens just before a release, when the pressure is on, its hard to think calmly, and there is no time for deep fixes. As a poor compromise, the libraries in core Solaris were built using a set of grossly incomplete hand written rules, supplemented with a number of dmake .WAIT directives used to group the libraries into sets of non-interacting groups that can be built in parallel because we think they don't depend on each other. From time to time, someone will suggest that we could analyze the built objects themselves to determine their dependencies and then generate make rules based on those relationships. This is possible, but but there are complications that limit the usefulness of that approach: To analyze an object, you have to build it first. This is a classic chicken and egg scenario. You could analyze the results of a previous build, but then you're not necessarily going to get accurate rules for the current code. It should be possible to build the code without having a built workspace available. The analysis will take time, and remember that we're constantly trying to make builds faster, not slower. By definition, such an approach will always be approximate, and therefore only incremantally more accurate than the hand written rules described above. The hand written rules are fast and cheap, while this idea is slow and complex, so we stayed with the hand written approach. Solaris was built that way, essentially forever, because these are genuinely difficult problems that had no easy answer. The makefiles were full of build races in which the right outcomes happened reliably for years until a new machine or a change in build server workload upset the accidental balance of things. After figuring out what had happened, you'd mutter "How did that ever work?", add another incomplete and soon to be inaccurate make dependency rule to the system, and move on. This was not a satisfying solution, as we tend to be perfectionists in the Solaris group, but we didn't have a better answer. It worked well enough, approximately. And so it went for years. We needed a different approach — a new idea to cut the Gordian Knot. In that discussion from May 2008, my fellow linker-alien Rod Evans had the initial spark that lead us to a game changing series of realizations: The link-editor is used to link objects together, but it only uses the ELF metadata in the object, consisting of symbol tables, ELF versioning sections, and similar data. Notably, it does not look at, or understand, the machine code that makes an object useful at runtime. If you had an object that only contained the ELF metadata for a dependency, but not the code or data, the link-editor would find it equally useful for linking, and would never know the difference. Call it a stub object. In the core Solaris OS, we require all objects to be built with a link-editor mapfile that describes all of its publically available functions and data. Could we build a stub object using the mapfile for the real object? It ought to be very fast to build stub objects, as there are no input objects to process. Unlike the real object, stub objects would not actually require any dependencies, and so, all of the stubs for the entire system could be built in parallel. When building the real objects, one could link against the stub objects instead of the real dependencies. This means that all the real objects can be built built in parallel too, without any serialization. We could replace a system that requires perfect makefile rules with a system that requires no ordering rules whatsoever. The results would be considerably more robust. We immediately realized that this idea had potential, but also that there were many details to sort out, lots of work to do, and that perhaps it wouldn't really pan out. As is often the case, it would be necessary to do the work and see how it turned out. Following that conversation, I set about trying to build a stub object. We determined that a faithful stub has to do the following: Present the same set of global symbols, with the same ELF versioning, as the real object. Functions are simple — it suffices to have a symbol of the right type, possibly, but not necessarily, referencing a null function in its text segment. Copy relocations make data more complicated to stub. The possibility of a copy relocation means that when you create a stub, the data symbols must have the actual size of the real data. Any error in this will go uncaught at link time, and will cause tragic failures at runtime that are very hard to diagnose. For reasons too obscure to go into here, involving tentative symbols, it is also important that the data reside in bss, or not, matching its placement in the real object. If the real object has more than one symbol pointing at the same data item, we call these aliased symbols. All data symbols in the stub object must exhibit the same aliasing as the real object. We imagined the stub library feature working as follows: A command line option to ld tells it to produce a stub rather than a real object. In this mode, only mapfiles are examined, and any object or shared libraries on the command line are are ignored. The extra information needed (function or data, size, and bss details) would be added to the mapfile. When building the real object instead of the stub, the extra information for building stubs would be validated against the resulting object to ensure that they match. In exploring these ideas, I immediately run headfirst into the reality of the original mapfile syntax, a subject that I would later write about as The Problem(s) With Solaris SVR4 Link-Editor Mapfiles. The idea of extending that poor language was a non-starter. Until a better mapfile syntax became available, which seemed unlikely in 2008, the solution could not involve extentions to the mapfile syntax. Instead, we cooked up the idea (hack) of augmenting mapfiles with stylized comments that would carry the necessary information. A typical definition might look like: # DATA(i386) __iob 0x3c0 # DATA(amd64,sparcv9) __iob 0xa00 # DATA(sparc) __iob 0x140 iob; A further problem then became clear: If we can't extend the mapfile syntax, then there's no good way to extend ld with an option to produce stub objects, and to validate them against the real objects. The idea of having ld read comments in a mapfile and parse them for content is an unacceptable hack. The entire point of comments is that they are strictly for the human reader, and explicitly ignored by the tool. Taking all of these speed bumps into account, I made a new plan: A perl script reads the mapfiles, generates some small C glue code to produce empty functions and data definitions, compiles and links the stub object from the generated glue code, and then deletes the generated glue code. Another perl script used after both objects have been built, to compare the real and stub objects, using data from elfdump, and validate that they present the same linking interface. By June 2008, I had written the above, and generated a stub object for libc. It was a useful prototype process to go through, and it allowed me to explore the ideas at a deep level. Ultimately though, the result was unsatisfactory as a basis for real product. There were so many issues: The use of stylized comments were fine for a prototype, but not close to professional enough for shipping product. The idea of having to document and support it was a large concern. The ideal solution for stub objects really does involve having the link-editor accept the same arguments used to build the real object, augmented with a single extra command line option. Any other solution, such as our prototype script, will require makefiles to be modified in deeper ways to support building stubs, and so, will raise barriers to converting existing code. A validation script that rederives what the linker knew when it built an object will always be at a disadvantage relative to the actual linker that did the work. A stub object should be identifyable as such. In the prototype, there was no tag or other metadata that would let you know that they weren't real objects. Being able to identify a stub object in this way means that the file command can tell you what it is, and that the runtime linker can refuse to try and run a program that loads one. At that point, we needed to apply this prototype to building Solaris. As you might imagine, the task of modifying all the makefiles in the core Solaris code base in order to do this is a massive task, and not something you'd enter into lightly. The quality of the prototype just wasn't good enough to justify that sort of time commitment, so I tabled the project, putting it on my list of long term things to think about, and moved on to other work. It would sit there for a couple of years. Semi-coincidentally, one of the projects I tacked after that was to create a new mapfile syntax for the Solaris link-editor. We had wanted to do something about the old mapfile syntax for many years. Others before me had done some paper designs, and a great deal of thought had already gone into the features it should, and should not have, but for various reasons things had never moved beyond the idea stage. When I joined Sun in late 2005, I got involved in reviewing those things and thinking about the problem. Now in 2008, fresh from relearning for the Nth time why the old mapfile syntax was a huge impediment to linker progress, it seemed like the right time to tackle the mapfile issue. Paving the way for proper stub object support was not the driving force behind that effort, but I certainly had them in mind as I moved forward. The new mapfile syntax, which we call version 2, integrated into Nevada build snv_135 in in February 2010: 6916788 ld version 2 mapfile syntax PSARC/2009/688 Human readable and extensible ld mapfile syntax In order to prove that the new mapfile syntax was adequate for general purpose use, I had also done an overhaul of the ON consolidation to convert all mapfiles to use the new syntax, and put checks in place that would ensure that no use of the old syntax would creep back in. That work went back into snv_144 in June 2010: 6916796 OSnet mapfiles should use version 2 link-editor syntax That was a big putback, modifying 517 files, adding 18 new files, and removing 110 old ones. I would have done this putback anyway, as the work was already done, and the benefits of human readable syntax are obvious. However, among the justifications listed in CR 6916796 was this We anticipate adding additional features to the new mapfile language that will be applicable to ON, and which will require all sharable object mapfiles to use the new syntax. I never explained what those additional features were, and no one asked. It was premature to say so, but this was a reference to stub objects. By that point, I had already put together a working prototype link-editor with the necessary support for stub objects. I was pleased to find that building stubs was indeed very fast. On my desktop system (Ultra 24), an amd64 stub for libc can can be built in a fraction of a second: % ptime ld -64 -z stub -o stubs/libc.so.1 -G -hlibc.so.1 \ -ztext -zdefs -Bdirect ... real 0.019708910 user 0.010101680 sys 0.008528431 In order to go from prototype to integrated link-editor feature, I knew that I would need to prove that stub objects were valuable. And to do that, I knew that I'd have to switch the Solaris ON consolidation to use stub objects and evaluate the outcome. And in order to do that experiment, ON would first need to be converted to version 2 mapfiles. Sub-mission accomplished. Normally when you design a new feature, you can devise reasonably small tests to show it works, and then deploy it incrementally, letting it prove its value as it goes. The entire point of stub objects however was to demonstrate that they could be successfully applied to an extremely large and complex code base, and specifically to solve the Solaris build issues detailed above. There was no way to finesse the matter — in order to move ahead, I would have to successfully use stub objects to build the entire ON consolidation and demonstrate their value. In software, the need to boil the ocean can often be a warning sign that things are trending in the wrong direction. Conversely, sometimes progress demands that you build something large and new all at once. A big win, or a big loss — sometimes all you can do is try it and see what happens. And so, I spent some time staring at ON makefiles trying to get a handle on how things work, and how they'd have to change. It's a big and messy world, full of complex interactions, unspecified dependencies, special cases, and knowledge of arcane makefile features... ...and so, I backed away, put it down for a few months and did other work... ...until the fall, when I felt like it was time to stop thinking and pondering (some would say stalling) and get on with it. Without stubs, the following gives a simplified high level view of how Solaris is built: An initially empty directory known as the proto, and referenced via the ROOT makefile macro is established to receive the files that make up the Solaris distribution. A top level setup rule creates the proto area, and performs operations needed to initialize the workspace so that the main build operations can be launched, such as copying needed header files into the proto area. Parallel builds are launched to build the kernel (usr/src/uts), libraries (usr/src/lib), and commands. The install makefile target builds each item and delivers a copy to the proto area. All libraries and executables link against the objects previously installed in the proto, implying the need to synchronize the order in which things are built. Subsequent passes run lint, and do packaging. Given this structure, the additions to use stub objects are: A new second proto area is established, known as the stub proto and referenced via the STUBROOT makefile macro. The stub proto has the same structure as the real proto, but is used to hold stub objects. All files in the real proto are delivered as part of the Solaris product. In contrast, the stub proto is used to build the product, and then thrown away. A new target is added to library Makefiles called stub. This rule builds the stub objects. The ld command is designed so that you can build a stub object using the same ld command line you'd use to build the real object, with the addition of a single -z stub option. This means that the makefile rules for building the stub objects are very similar to those used to build the real objects, and many existing makefile definitions can be shared between them. A new target is added to the Makefiles called stubinstall which delivers the stub objects built by the stub rule into the stub proto. These rules reuse much of existing plumbing used by the existing install rule. The setup rule runs stubinstall over the entire lib subtree as part of its initialization. All libraries and executables link against the objects in the stub proto rather than the main proto, and can therefore be built in parallel without any synchronization. There was no small way to try this that would yield meaningful results. I would have to take a leap of faith and edit approximately 1850 makefiles and 300 mapfiles first, trusting that it would all work out. Once the editing was done, I'd type make and see what happened. This took about 6 weeks to do, and there were many dark days when I'd question the entire project, or struggle to understand some of the many twisted and complex situations I'd uncover in the makefiles. I even found a couple of new issues that required changes to the new stub object related code I'd added to ld. With a substantial amount of encouragement and help from some key people in the Solaris group, I eventually got the editing done and stub objects for the entire workspace built. I found that my desktop system could build all the stub objects in the workspace in roughly a minute. This was great news, as it meant that use of the feature is effectively free — no one was likely to notice or care about the cost of building them. After another week of typing make, fixing whatever failed, and doing it again, I succeeded in getting a complete build! The next step was to remove all of the make rules and .WAIT statements dedicated to controlling the order in which libraries under usr/src/lib are built. This came together pretty quickly, and after a few more speed bumps, I had a workspace that built cleanly and looked like something you might actually be able to integrate someday. This was a significant milestone, but there was still much left to do. I turned to doing full nightly builds. Every type of build (open, closed, OpenSolaris, export, domestic) had to be tried. Each type failed in a new and unique way, requiring some thinking and rework. As things came together, I became aware of things that could have been done better, simpler, or cleaner, and those things also required some rethinking, the seeking of wisdom from others, and some rework. After another couple of weeks, it was in close to final form. My focus turned towards the end game and integration. This was a huge workspace, and needed to go back soon, before changes in the gate would made merging increasingly difficult. At this point, I knew that the stub objects had greatly simplified the makefile logic and uncovered a number of race conditions, some of which had been there for years. I assumed that the builds were faster too, so I did some builds intended to quantify the speedup in build time that resulted from this approach. It had never occurred to me that there might not be one. And so, I was very surprised to find that the wall clock build times for a stock ON workspace were essentially identical to the times for my stub library enabled version! This is why it is important to always measure, and not just to assume. One can tell from first principles, based on all those removed dependency rules in the library makefile, that the stub object version of ON gives dmake considerably more opportunities to overlap library construction. Some hypothesis were proposed, and shot down: Could we have disabled dmakes parallel feature? No, a quick check showed things being build in parallel. It was suggested that we might be I/O bound, and so, the threads would be mostly idle. That's a plausible explanation, but system stats didn't really support it. Plus, the timing between the stub and non-stub cases were just too suspiciously identical. Are our machines already handling as much parallelism as they are capable of, and unable to exploit these additional opportunities? Once again, we didn't see the evidence to back this up. Eventually, a more plausible and obvious reason emerged: We build the libraries and commands (usr/src/lib, usr/src/cmd) in parallel with the kernel (usr/src/uts). The kernel is the long leg in that race, and so, wall clock measurements of build time are essentially showing how long it takes to build uts. Although it would have been nice to post a huge speedup immediately, we can take solace in knowing that stub objects simplify the makefiles and reduce the possibility of race conditions. The next step in reducing build time should be to find ways to reduce or overlap the uts part of the builds. When that leg of the build becomes shorter, then the increased parallelism in the libs and commands will pay additional dividends. Until then, we'll just have to settle for simpler and more robust. And so, I integrated the link-editor support for creating stub objects into snv_153 (November 2010) with 6993877 ld should produce stub objects PSARC/2010/397 ELF Stub Objects followed by the work to convert the ON consolidation in snv_161 (February 2011) with 7009826 OSnet should use stub objects 4631488 lib/Makefile is too patient: .WAITs should be reduced This was a huge putback, with 2108 modified files, 8 new files, and 2 removed files. Due to the size, I was allowed a window after snv_160 closed in which to do the putback. It went pretty smoothly for something this big, a few more preexisting race conditions would be discovered and addressed over the next few weeks, and things have been quiet since then. Conclusions and Looking Forward Solaris has been built with stub objects since February. The fact that developers no longer specify the order in which libraries are built has been a big success, and we've eliminated an entire class of build error. That's not to say that there are no build races left in the ON makefiles, but we've taken a substantial bite out of the problem while generally simplifying and improving things. The introduction of a stub proto area has also opened some interesting new possibilities for other build improvements. As this article has become quite long, and as those uses do not involve stub objects, I will defer that discussion to a future article.

  Read the article

• Part 2&ndash;Load Testing In The Cloud

  - by Tarun Arora

  Welcome to Part 2, In Part 1 we discussed the advantages of creating a Test Rig in the cloud, the Azure edge and the Test Rig Topology we want to get to. In Part 2, Let’s start by understanding the components of Azure we’ll be making use of followed by manually putting them together to create the test rig, so… let’s get down dirty start setting up the Test Rig.  What Components of Azure will I be using for building the Test Rig in the Cloud? To run the Test Agents we’ll make use of Windows Azure Compute and to enable communication between Test Controller and Test Agents we’ll make use of Windows Azure Connect.  Azure Connect The Test Controller is on premise and the Test Agents are in the cloud (How will they talk?). To enable communication between the two, we’ll make use of Windows Azure Connect. With Windows Azure Connect, you can use a simple user interface to configure IPsec protected connections between computers or virtual machines (VMs) in your organization’s network, and roles running in Windows Azure. With this you can now join Windows Azure role instances to your domain, so that you can use your existing methods for domain authentication, name resolution, or other domain-wide maintenance actions. For more details refer to an overview of Windows Azure connect. A very useful video explaining everything you wanted to know about Windows Azure connect.  Azure Compute Windows Azure compute provides developers a platform to host and manage applications in Microsoft’s data centres across the globe. A Windows Azure application is built from one or more components called ‘roles.’ Roles come in three different types: Web role, Worker role, and Virtual Machine (VM) role, we’ll be using the Worker role to set up the Test Agents. A very nice blog post discussing the difference between the 3 role types. Developers are free to use the .NET framework or other software that runs on Windows with the Worker role or Web role. Developers can also create applications using languages such as PHP and Java. More on Windows Azure Compute. Each Windows Azure compute instance represents a virtual server... Virtual Machine Size CPU Cores Memory Cost Per Hour Extra Small Shared 768 MB $0.04 Small 1 1.75 GB $0.12 Medium 2 3.50 GB $0.24 Large 4 7.00 GB $0.48 Extra Large 8 14.00 GB $0.96   You might want to review the Windows Azure Pricing FAQ. Let’s Get Started building the Test Rig… Configuration Machine Role Comments VM – 1 Domain Controller for Playpit.com On Premise VM – 2 TFS, Test Controller On Premise VM – 3 Test Agent Cloud   In this blog post I would assume that you have the domain, Team Foundation Server and Test Controller Installed and set up already. If not, please refer to the TFS 2010 Installation Guide and this walkthrough on MSDN to set up your Test Controller. You can also download a preconfigured TFS 2010 VM from Brian Keller's blog, Brian also has some great hands on Labs on TFS 2010 that you may want to explore. I. Lets start building VM – 3: The Test Agent Download the Windows Azure SDK and Tools Open Visual Studio and create a new Windows Azure Project using the Cloud Template                   Choose the Worker Role for reasons explained in the earlier post         The WorkerRole.cs implements the Run() and OnStart() methods, no code changes required. You should be able to compile the project and run it in the compute emulator (The compute emulator should have been installed as part of the Windows Azure Toolkit) on your local machine.                   We will only be making changes to WindowsAzureProject, open ServiceDefinition.csdef. Ensure that the vmsize is small (remember the cost chart above). Import the “Connect” module. I am importing the Connect module because I need to join the Worker role VM to the Playpit domain. <?xml version="1.0" encoding="utf-8"?> <ServiceDefinition name="WindowsAzureProject2" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition"> <WorkerRole name="WorkerRole1" vmsize="Small"> <Imports> <Import moduleName="Diagnostics" /> <Import moduleName="Connect"/> </Imports> </WorkerRole> </ServiceDefinition> Go to the ServiceConfiguration.Cloud.cscfg and note that settings with key ‘Microsoft.WindowsAzure.Plugins.Connect.%%%%’ have been added to the configuration file. This is because you decided to import the connect module. See the config below. <?xml version="1.0" encoding="utf-8"?> <ServiceConfiguration serviceName="WindowsAzureProject2" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration" osFamily="1" osVersion="*"> <Role name="WorkerRole1"> <Instances count="1" /> <ConfigurationSettings> <Setting name="Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.ActivationToken" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Refresh" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.WaitForConnectivity" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Upgrade" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.EnableDomainJoin" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainFQDN" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainControllerFQDN" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainAccountName" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainPassword" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainOU" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Administrators" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainSiteName" value="" /> </ConfigurationSettings> </Role> </ServiceConfiguration>             Let’s go step by step and understand all the highlighted parameters and where you can find the values for them.       osFamily – By default this is set to 1 (Windows Server 2008 SP2). Change this to 2 if you want the Windows Server 2008 R2 operating system. The Advantage of using osFamily = “2” is that you get Powershell 2.0 rather than Powershell 1.0. In Powershell 2.0 you could simply use “powershell -ExecutionPolicy Unrestricted ./myscript.ps1” and it will work while in Powershell 1.0 you will have to change the registry key by including the following in your command file “reg add HKLM\Software\Microsoft\PowerShell\1\ShellIds\Microsoft.PowerShell /v ExecutionPolicy /d Unrestricted /f” before you can execute any power shell. The other reason you might want to move to os2 is if you wanted IIS 7.5.       Activation Token – To enable communication between the on premise machine and the Windows Azure Worker role VM both need to have the same token. Log on to Windows Azure Management Portal, click on Connect, click on Get Activation Token, this should give you the activation token, copy the activation token to the clipboard and paste it in the configuration file. Note – Later in the blog I’ll be showing you how to install connect on the on premise machine.                       EnableDomainJoin – Set the value to true, ofcourse we want to join the on windows azure worker role VM to the domain.       DomainFQDN, DomainControllerFQDN, DomainAccountName, DomainPassword, DomainOU, Administrators – This information is specific to your domain. I have extracted this information from the ‘service manager’ and ‘Active Directory Users and Computers’. Also, i created a new Domain-OU namely ‘CloudInstances’ so all my cloud instances joined to my domain show up here, this is optional. You can encrypt the DomainPassword – refer to the instructions here. Or hold fire, I’ll be covering that when i come to certificates and encryption in the coming section.       Now once you have filled all this information up, the configuration file should look something like below, <?xml version="1.0" encoding="utf-8"?> <ServiceConfiguration serviceName="WindowsAzureProject2" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration" osFamily="2" osVersion="*"> <Role name="WorkerRole1"> <Instances count="1" /> <ConfigurationSettings> <Setting name="Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.ActivationToken" value="45f55fea-f194-4fbc-b36e-25604faac784" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Refresh" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.WaitForConnectivity" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Upgrade" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.EnableDomainJoin" value="true" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainFQDN" value="play.pit.com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainControllerFQDN" value="WIN-KUDQMQFGQOL.play.pit.com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainAccountName" value="playpit\Administrator" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainPassword" value="************************" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainOU" value="OU=CloudInstances, DC=Play, DC=Pit, DC=com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Administrators" value="Playpit\Administrator" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainSiteName" value="" /> </ConfigurationSettings> </Role> </ServiceConfiguration> Next we will be enabling the Remote Desktop module in to the ServiceDefinition.csdef, we could make changes manually or allow a beautiful wizard to help us make changes. I prefer the second option. So right click on the Windows Azure project and choose Publish       Now once you get the publish wizard, if you haven’t already you would be asked to import your Windows Azure subscription, this is simply the Msdn subscription activation key xml. Once you have done click Next to go to the Settings page and check ‘Enable Remote Desktop for all roles’.       As soon as you do that you get another pop up asking you the details for the user that you would be logging in with (make sure you enter a reasonable expiry date, you do not want the user account to expire today). Notice the more information tag at the bottom, click that to get access to the certificate section. See screen shot below.       From the drop down select the option to create a new certificate        In the pop up window enter the friendly name for your certificate. In my case I entered ‘WAC – Test Rig’ and click ok. This will create a new certificate for you. Click on the view button to see the certificate details. Do you see the Thumbprint, this is the value that will go in the config file (very important). Now click on the Copy to File button to copy the certificate, we will need to import the certificate to the windows Azure Management portal later. So, make sure you save it a safe location.                                Click Finish and enter details of the user you would like to create with permissions for remote desktop access, once you have entered the details on the ‘Remote desktop configuration’ screen click on Ok. From the Publish Windows Azure Wizard screen press Cancel. Cancel because we don’t want to publish the role just yet and Yes because we want to save all the changes in the config file.       Now if you go to the ServiceDefinition.csdef file you will see that the RemoteAccess and RemoteForwarder roles have been imported for you. <?xml version="1.0" encoding="utf-8"?> <ServiceDefinition name="WindowsAzureProject2" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition"> <WorkerRole name="WorkerRole1" vmsize="Small"> <Imports> <Import moduleName="Diagnostics" /> <Import moduleName="Connect" /> <Import moduleName="RemoteAccess" /> <Import moduleName="RemoteForwarder" /> </Imports> </WorkerRole> </ServiceDefinition> Now go to the ServiceConfiguration.Cloud.cscfg file and you see a whole bunch for setting “Microsoft.WindowsAzure.Plugins.RemoteAccess.%%%” values added for you. <?xml version="1.0" encoding="utf-8"?> <ServiceConfiguration serviceName="WindowsAzureProject2" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration" osFamily="2" osVersion="*"> <Role name="WorkerRole1"> <Instances count="1" /> <ConfigurationSettings> <Setting name="Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.ActivationToken" value="45f55fea-f194-4fbc-b36e-25604faac784" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Refresh" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.WaitForConnectivity" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Upgrade" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.EnableDomainJoin" value="true" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainFQDN" value="play.pit.com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainControllerFQDN" value="WIN-KUDQMQFGQOL.play.pit.com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainAccountName" value="playpit\Administrator" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainPassword" value="************************" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainOU" value="OU=CloudInstances, DC=Play, DC=Pit, DC=com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Administrators" value="Playpit\Administrator" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainSiteName" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.Enabled" value="true" /> <Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.AccountUsername" value="Administrator" /> <Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.AccountEncryptedPassword" value="MIIBnQYJKoZIhvcNAQcDoIIBjjCCAYoCAQAxggFOMIIBSgIBADAyMB4xHDAaBgNVBAMME1dpbmRvd 3MgQXp1cmUgVG9vbHMCEGa+B46voeO5T305N7TSG9QwDQYJKoZIhvcNAQEBBQAEggEABg4ol5Xol66Ip6QKLbAPWdmD4ae ADZ7aKj6fg4D+ATr0DXBllZHG5Umwf+84Sj2nsPeCyrg3ZDQuxrfhSbdnJwuChKV6ukXdGjX0hlowJu/4dfH4jTJC7sBWS AKaEFU7CxvqYEAL1Hf9VPL5fW6HZVmq1z+qmm4ecGKSTOJ20Fptb463wcXgR8CWGa+1w9xqJ7UmmfGeGeCHQ4QGW0IDSBU6ccg vzF2ug8/FY60K1vrWaCYOhKkxD3YBs8U9X/kOB0yQm2Git0d5tFlIPCBT2AC57bgsAYncXfHvPesI0qs7VZyghk8LVa9g5IqaM Cp6cQ7rmY/dLsKBMkDcdBHuCTAzBgkqhkiG9w0BBwEwFAYIKoZIhvcNAwcECDRVifSXbA43gBApNrp40L1VTVZ1iGag+3O1" /> <Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.AccountExpiration" value="2012-11-27T23:59:59.0000000+00:00" /> <Setting name="Microsoft.WindowsAzure.Plugins.RemoteForwarder.Enabled" value="true" /> </ConfigurationSettings> <Certificates> <Certificate name="Microsoft.WindowsAzure.Plugins.RemoteAccess.PasswordEncryption" thumbprint="AA23016CF0BDFC344400B5B82706B608B92E4217" thumbprintAlgorithm="sha1" /> </Certificates> </Role> </ServiceConfiguration>          Okay let’s look at them one at a time,       Enabled - Yes, we would like to enable Remote Access.       AccountUserName – This is the user name you entered while you were on the publish windows azure role screen, as detailed above.       AccountEncrytedPassword – Try and decode that, the certificate is used to encrypt the password you specified for the user account. Remember earlier i said, either use the instructions or wait and i’ll be showing you encryption, now the user account i am using for rdp has the same password as my domain password, so i can simply copy the value of the AccountEncryptedPassword to the DomainPassword as well.       AccountExpiration – This is the expiration as you specified in the wizard earlier, make sure your account does not expire today.       Remote Forwarder – Check out the documentation, below is how I understand it, -- One role in an application that implements a remote desktop connection must import the RemoteForwarder module. The two modules work together to enable the remote desktop connections to role instances. -- If you have multiple roles defined in the service model, it does not matter which role you add the RemoteForwarder module to, but you must add it to only one of the role definitions.       Certificate – Remember the certificate thumbprint from the wizard, the on premise machine and windows azure role machine that need to speak to each other must have the same thumbprint. More on that when we install Windows Azure connect Endpoints on the on premise machine. As i said earlier, in this blog post, I’ll be showing you the manual process so i won’t be scripting any star up tasks to install the test agent or register the test agent with the TFS Server. I’ll be showing you all this cool stuff in the next blog post, that’s because it’s important to understand the manual side of it, it becomes easier for you to troubleshoot in case something fails. Having said that, the changes we have made are sufficient to spin up the Windows Azure Worker Role aka Test Agent VM, have it connected with the play.pit.com domain and have remote access enabled on it. Before we deploy the Test Agent VM we need to set up Windows Azure Connect on the TFS Server. II. Windows Azure Connect: Setting up Connect on VM – 2 i.e. TFS & Test Controller Glad you made it so far, now to enable communication between the on premise TFS/Test Controller and Azure-ed Test Agent we need to enable communication. We have set up the Azure connect module in the Test Agent configuration, now the connect end points need to be enabled on the on premise machines, let’s have a look at how we can do this. Log on to VM – 2 running the TFS Server and Test Controller Log on to the Windows Azure Management Portal and click on Virtual Network Click on Virtual Network, if you already have a subscription you should see the below screen shot, if not, you would be asked to complete the subscription first        Click on Install Local Endpoints from the top left on the panel and you get a url appended with a token id in it, remember the token i showed you earlier, in theory the token you get here should match the token you added to the Test Agent config file.        Copy the url to the clip board and paste it in IE explorer (important, the installation at present only works out of IE and you need to have cookies enabled in order to complete the installation). As stated in the pop up, you can NOT download and run the software later, you need to run it as is, since it contains a token. Once the installation completes you should see the Windows Azure connect icon in the system tray.                         Right click the Azure Connect icon, choose Diagnostics and refer to this link for diagnostic detail terminology. NOTE – Unfortunately I could not see the Windows Azure connect icon in the system tray, a bit of binging with Google revealed that the azure connect icon is only shown when the ‘Windows Azure Connect Endpoint’ Service is started. So go to services.msc and make sure that the service is started, if not start it, unfortunately again, the service did not start for me on a manual start and i realised that one of the dependant services was disabled, you can look at the service dependencies and start them and then start windows azure connect. Bottom line, you need to start Windows Azure connect service before you can proceed. Please refer here on MSDN for more on Troubleshooting Windows Azure connect. (Follow the next step as well)   Now go back to the Windows Azure Management Portal and from Groups and Roles create a new group, lets call it ‘Test Rig’. Make sure you add the VM – 2 (the TFS Server VM where you just installed the endpoint).       Now if you go back to the Azure Connect icon in the system tray and click ‘Refresh Policy’ you will notice that the disconnected status of the icon should change to ready for connection. III. Importing Certificate in to Windows Azure Management Portal But before that you need to import the certificate you created in Step I in to the Windows Azure Management Portal. Log on to the Windows Azure Management Portal and click on ‘Hosted Services, Storage Accounts & CDN’ and then ‘Management Certificates’ followed by Add Certificates as shown in the screen shot below        Browse to the location where you saved the certificate earlier, remember… Refer to Step I in case you forgot.        Now you should be able to see the imported certificate here, make sure the thumbprint of the certificate matches the one you inserted in the config files        IV. Publish Windows Azure Worker Role aka Test Agent Having completed I, II and III, you are ready to publish the Test Agent VM – 3 to the cloud. Go to Visual Studio and right click the Windows Azure project and select Publish. Verify the infomration in the wizard, from the advanced settings tab, you can also enabled capture of intellitrace or profiling information.         Click Next and Click Publish! From the view menu bar select the Windows Azure Activity Log window.       Now you should be able to see the deployment progress in real time.             In the Windows Azure Management Portal, you should also be able to see the progress of creation of a new Worker Role.       Once the deployment is complete you should be able to RDP (go to run prompt type mstsc and in the pop up the machine name) in to the Test Agent Worker Role VM from the Playpit network using the domain admin user account. In case you are unable to log in to the Test Agent using the domain admin user account it means the process of joining the Test Agent to the domain has failed! But the good news is, because you imported the connect module, you can connect to the Test Agent machine using Windows Azure Management Portal and troubleshoot the reason for failure, you will be able to log in with the user name and password you specified in the config file for the keys ‘RemoteAccess.AccountUsername, RemoteAccess.EncryptedPassword (just that enter the password unencrypted)’, fix it or manually join the machine to the domain. Once you have managed to Join the Test Agent VM to the Domain move to the next step.      So, log in to the Test Agent Worker Role VM with the Playpit Domain Administrator and verify that you can log in, the machine is connected to the domain and the connect service is successfully running. If yes, give your self a pat on the back, you are 80% mission accomplished!         Go to the Windows Azure Management Portal and click on Virtual Network, click on Groups and Roles and click on Test Rig, click Edit Group, the edit the Test Rig group you created earlier. In the Connect to section, click on Add to select the worker role you have just deployed. Also, check the ‘Allow connections between endpoints in the group’ with this you will enable to communication between test controller and test agents and test agents/test agents. Click Save.      Now, you are ready to deploy the Test Agent software on the Worker Role Test Agent VM and configure it to work with the Test Controller. V. Configuring VM – 3: Installing Test Agent and Associating Test Agent to Controller Log in to the Worker Role Test Agent VM that you have just successfully deployed, make sure you log in with the domain administrator account. Download the All Agents software from MSDN, ‘en_visual_studio_agents_2010_x86_x64_dvd_509679.iso’, extract the iso and navigate to where you have extracted the iso. In my case, i have extracted the iso to “C:\Resources\Temp\VsAgentSetup”. Open the Test Agent folder and double click on setup.exe. Once you have installed the Test Agent you should reach the configuration window. If you face any issues installing TFS Test Agent on the VM, refer to the walkthrough on MSDN.       Once you have successfully installed the Test Agent software you will need to configure the test agent. Right click the test agent configuration tool and run as a different user. i.e. an Administrator. This is really to run the configuration wizard with elevated privileges (you might have UAC block something's otherwise).        In the run options, you can select ‘service’ you do not need to run the agent as interactive un less you are running coded UI tests. I have specified the domain administrator to connect to the TFS Test Controller. In real life, i would never do that, i would create a separate test user service account for this purpose. But for the blog post, we are using the most powerful user so that any policies or restrictions don’t block you.        Click the Apply Settings button and you should be all green! If not, the summary usually gives helpful error messages that you can resolve and proceed. As per my experience, you may run in to either a permission or a firewall blocking communication issue.        And now the moment of truth! Go to VM –2 open up Visual Studio and from the Test Menu select Manage Test Controller       Mission Accomplished! You should be able to see the Test Agent that you have just configured here,         VI. Creating and Running Load Tests on your brand new Azure-ed Test Rig I have various blog posts on Performance Testing with Visual Studio Ultimate, you can follow the links and videos below, Blog Posts: - Part 1 – Performance Testing using Visual Studio 2010 Ultimate - Part 2 – Performance Testing using Visual Studio 2010 Ultimate - Part 3 – Performance Testing using Visual Studio 2010 Ultimate Videos: - Test Tools Configuration & Settings in Visual Studio - Why & How to Record Web Performance Tests in Visual Studio Ultimate - Goal Driven Load Testing using Visual Studio Ultimate Now that you have created your load tests, there is one last change you need to make before you can run the tests on your Azure Test Rig, create a new Test settings file, and change the Test Execution method to ‘Remote Execution’ and select the test controller you have configured the Worker Role Test Agent against in our case VM – 2 So, go on, fire off a test run and see the results of the test being executed on the Azur-ed Test Rig. Review and What’s next? A quick recap of the benefits of running the Test Rig in the cloud and what i will be covering in the next blog post AND I would love to hear your feedback! Advantages Utilizing the power of Azure compute to run a heavy virtual user load. Benefiting from the Azure flexibility, destroy Test Agents when not in use, takes < 25 minutes to spin up a new Test Agent. Most important test Network Latency, (network latency and speed of connection are two different things – usually network latency is very hard to test), by placing the Test Agents in Microsoft Data centres around the globe, one can actually test the lag in transferring the bytes not because of a slow connection but because the page has been requested from the other side of the globe. Next Steps The process of spinning up the Test Agents in windows Azure is not 100% automated. I am working on the Worker process and power shell scripts to make the role deployment, unattended install of test agent software and registration of the test agent to the test controller automated. In the next blog post I will show you how to make the complete process unattended and automated. Remember to subscribe to http://feeds.feedburner.com/TarunArora. Hope you enjoyed this post, I would love to hear your feedback! If you have any recommendations on things that I should consider or any questions or feedback, feel free to leave a comment. See you in Part III.   Share this post : CodeProject

  Read the article

• Towards Database Continuous Delivery – What Next after Continuous Integration? A Checklist

  - by Ben Rees

  .dbd-banner p{ font-size:0.75em; padding:0 0 10px; margin:0 } .dbd-banner p span{ color:#675C6D; } .dbd-banner p:last-child{ padding:0; } @media ALL and (max-width:640px){ .dbd-banner{ background:#f0f0f0; padding:5px; color:#333; margin-top: 5px; } } -- Database delivery patterns & practices STAGE 4 AUTOMATED DEPLOYMENT If you’ve been fortunate enough to get to the stage where you’ve implemented some sort of continuous integration process for your database updates, then hopefully you’re seeing the benefits of that investment – constant feedback on changes your devs are making, advanced warning of data loss (prior to the production release on Saturday night!), a nice suite of automated tests to check business logic, so you know it’s going to work when it goes live, and so on. But what next? What can you do to improve your delivery process further, moving towards a full continuous delivery process for your database? In this article I describe some of the issues you might need to tackle on the next stage of this journey, and how to plan to overcome those obstacles before they appear. Our Database Delivery Learning Program consists of four stages, really three – source controlling a database, running continuous integration processes, then how to set up automated deployment (the middle stage is split in two – basic and advanced continuous integration, making four stages in total). If you’ve managed to work through the first three of these stages – source control, basic, then advanced CI, then you should have a solid change management process set up where, every time one of your team checks in a change to your database (whether schema or static reference data), this change gets fully tested automatically by your CI server. But this is only part of the story. Great, we know that our updates work, that the upgrade process works, that the upgrade isn’t going to wipe our 4Tb of production data with a single DROP TABLE. But – how do you get this (fully tested) release live? Continuous delivery means being always ready to release your software at any point in time. There’s a significant gap between your latest version being tested, and it being easily releasable. Just a quick note on terminology – there’s a nice piece here from Atlassian on the difference between continuous integration, continuous delivery and continuous deployment. This piece also gives a nice description of the benefits of continuous delivery. These benefits have been summed up by Jez Humble at Thoughtworks as: “Continuous delivery is a set of principles and practices to reduce the cost, time, and risk of delivering incremental changes to users” There’s another really useful piece here on Simple-Talk about the need for continuous delivery and how it applies to the database written by Phil Factor – specifically the extra needs and complexities of implementing a full CD solution for the database (compared to just implementing CD for, say, a web app). So, hopefully you’re convinced of moving on the the next stage! The next step after CI is to get some sort of automated deployment (or “release management”) process set up. But what should I do next? What do I need to plan and think about for getting my automated database deployment process set up? Can’t I just install one of the many release management tools available and hey presto, I’m ready! If only it were that simple. Below I list some of the areas that it’s worth spending a little time on, where a little planning and prep could go a long way. It’s also worth pointing out, that this should really be an evolving process. Depending on your starting point of course, it can be a long journey from your current setup to a full continuous delivery pipeline. If you’ve got a CI mechanism in place, you’re certainly a long way down that path. Nevertheless, we’d recommend evolving your process incrementally. Pages 157 and 129-141 of the book on Continuous Delivery (by Jez Humble and Dave Farley) have some great guidance on building up a pipeline incrementally: http://www.amazon.com/Continuous-Delivery-Deployment-Automation-Addison-Wesley/dp/0321601912 For now, in this post, we’ll look at the following areas for your checklist: You and Your Team Environments The Deployment Process Rollback and Recovery Development Practices You and Your Team It’s a cliché in the DevOps community that “It’s not all about processes and tools, really it’s all about a culture”. As stated in this DevOps report from Puppet Labs: “DevOps processes and tooling contribute to high performance, but these practices alone aren’t enough to achieve organizational success. The most common barriers to DevOps adoption are cultural: lack of manager or team buy-in, or the value of DevOps isn’t understood outside of a specific group”. Like most clichés, there’s truth in there – if you want to set up a database continuous delivery process, you need to get your boss, your department, your company (if relevant) onside. Why? Because it’s an investment with the benefits coming way down the line. But the benefits are huge – for HP, in the book A Practical Approach to Large-Scale Agile Development: How HP Transformed LaserJet FutureSmart Firmware, these are summarized as: -2008 to present: overall development costs reduced by 40% -Number of programs under development increased by 140% -Development costs per program down 78% -Firmware resources now driving innovation increased by a factor of 8 (from 5% working on new features to 40% But what does this mean? It means that, when moving to the next stage, to make that extra investment in automating your deployment process, it helps a lot if everyone is convinced that this is a good thing. That they understand the benefits of automated deployment and are willing to make the effort to transform to a new way of working. Incidentally, if you’re ever struggling to convince someone of the value I’d strongly recommend just buying them a copy of this book – a great read, and a very practical guide to how it can really work at a large org. I’ve spoken to many customers who have implemented database CI who describe their deployment process as “The point where automation breaks down. Up to that point, the CI process runs, untouched by human hand, but as soon as that’s finished we revert to manual.” This deployment process can involve, for example, a DBA manually comparing an environment (say, QA) to production, creating the upgrade scripts, reading through them, checking them against an Excel document emailed to him/her the night before, turning to page 29 in his/her notebook to double-check how replication is switched off and on for deployments, and so on and so on. Painful, error-prone and lengthy. But the point is, if this is something like your deployment process, telling your DBA “We’re changing everything you do and your toolset next week, to automate most of your role – that’s okay isn’t it?” isn’t likely to go down well. There’s some work here to bring him/her onside – to explain what you’re doing, why there will still be control of the deployment process and so on. Or of course, if you’re the DBA looking after this process, you have to do a similar job in reverse. You may have researched and worked out how you’d like to change your methodology to start automating your painful release process, but do the dev team know this? What if they have to start producing different artifacts for you? Will they be happy with this? Worth talking to them, to find out. As well as talking to your DBA/dev team, the other group to get involved before implementation is your manager. And possibly your manager’s manager too. As mentioned, unless there’s buy-in “from the top”, you’re going to hit problems when the implementation starts to get rocky (and what tool/process implementations don’t get rocky?!). You need to have support from someone senior in your organisation – someone you can turn to when you need help with a delayed implementation, lack of resources or lack of progress. Actions: Get your DBA involved (or whoever looks after live deployments) and discuss what you’re planning to do or, if you’re the DBA yourself, get the dev team up-to-speed with your plans, Get your boss involved too and make sure he/she is bought in to the investment. Environments Where are you going to deploy to? And really this question is – what environments do you want set up for your deployment pipeline? Assume everyone has “Production”, but do you have a QA environment? Dedicated development environments for each dev? Proper pre-production? I’ve seen every setup under the sun, and there is often a big difference between “What we want, to do continuous delivery properly” and “What we’re currently stuck with”. Some of these differences are: What we want What we’ve got Each developer with their own dedicated database environment A single shared “development” environment, used by everyone at once An Integration box used to test the integration of all check-ins via the CI process, along with a full suite of unit-tests running on that machine In fact if you have a CI process running, you’re likely to have some sort of integration server running (even if you don’t call it that!). Whether you have a full suite of unit tests running is a different question… Separate QA environment used explicitly for manual testing prior to release “We just test on the dev environments, or maybe pre-production” A proper pre-production (or “staging”) box that matches production as closely as possible Hopefully a pre-production box of some sort. But does it match production closely!? A production environment reproducible from source control A production box which has drifted significantly from anything in source control The big question is – how much time and effort are you going to invest in fixing these issues? In reality this just involves figuring out which new databases you’re going to create and where they’ll be hosted – VMs? Cloud-based? What about size/data issues – what data are you going to include on dev environments? Does it need to be masked to protect access to production data? And often the amount of work here really depends on whether you’re working on a new, greenfield project, or trying to update an existing, brownfield application. There’s a world if difference between starting from scratch with 4 or 5 clean environments (reproducible from source control of course!), and trying to re-purpose and tweak a set of existing databases, with all of their surrounding processes and quirks. But for a proper release management process, ideally you have: Dedicated development databases, An Integration server used for testing continuous integration and running unit tests. [NB: This is the point at which deployments are automatic, without human intervention. Each deployment after this point is a one-click (but human) action], QA – QA engineers use a one-click deployment process to automatically* deploy chosen releases to QA for testing, Pre-production. The environment you use to test the production release process, Production. * A note on the use of the word “automatic” – when carrying out automated deployments this does not mean that the deployment is happening without human intervention (i.e. that something is just deploying over and over again). It means that the process of carrying out the deployment is automatic in that it’s not a person manually running through a checklist or set of actions. The deployment still requires a single-click from a user. Actions: Get your environments set up and ready, Set access permissions appropriately, Make sure everyone understands what the environments will be used for (it’s not a “free-for-all” with all environments to be accessed, played with and changed by development). The Deployment Process As described earlier, most existing database deployment processes are pretty manual. The following is a description of a process we hear very often when we ask customers “How do your database changes get live? How does your manual process work?” Check pre-production matches production (use a schema compare tool, like SQL Compare). Sometimes done by taking a backup from production and restoring in to pre-prod, Again, use a schema compare tool to find the differences between the latest version of the database ready to go live (i.e. what the team have been developing). This generates a script, User (generally, the DBA), reviews the script. This often involves manually checking updates against a spreadsheet or similar, Run the script on pre-production, and check there are no errors (i.e. it upgrades pre-production to what you hoped), If all working, run the script on production.* * this assumes there’s no problem with production drifting away from pre-production in the interim time period (i.e. someone has hacked something in to the production box without going through the proper change management process). This difference could undermine the validity of your pre-production deployment test. Red Gate is currently working on a free tool to detect this problem – sign up here at www.sqllighthouse.com, if you’re interested in testing early versions. There are several variations on this process – some better, some much worse! How do you automate this? In particular, step 3 – surely you can’t automate a DBA checking through a script, that everything is in order!? The key point here is to plan what you want in your new deployment process. There are so many options. At one extreme, pure continuous deployment – whenever a dev checks something in to source control, the CI process runs (including extensive and thorough testing!), before the deployment process keys in and automatically deploys that change to the live box. Not for the faint hearted – and really not something we recommend. At the other extreme, you might be more comfortable with a semi-automated process – the pre-production/production matching process is automated (with an error thrown if these environments don’t match), followed by a manual intervention, allowing for script approval by the DBA. One he/she clicks “Okay, I’m happy for that to go live”, the latter stages automatically take the script through to live. And anything in between of course – and other variations. But we’d strongly recommended sitting down with a whiteboard and your team, and spending a couple of hours mapping out “What do we do now?”, “What do we actually want?”, “What will satisfy our needs for continuous delivery, but still maintaining some sort of continuous control over the process?” NB: Most of what we’re discussing here is about production deployments. It’s important to note that you will also need to map out a deployment process for earlier environments (for example QA). However, these are likely to be less onerous, and many customers opt for a much more automated process for these boxes. Actions: Sit down with your team and a whiteboard, and draw out the answers to the questions above for your production deployments – “What do we do now?”, “What do we actually want?”, “What will satisfy our needs for continuous delivery, but still maintaining some sort of continuous control over the process?” Repeat for earlier environments (QA and so on). Rollback and Recovery If only every deployment went according to plan! Unfortunately they don’t – and when things go wrong, you need a rollback or recovery plan for what you’re going to do in that situation. Once you move in to a more automated database deployment process, you’re far more likely to be deploying more frequently than before. No longer once every 6 months, maybe now once per week, or even daily. Hence the need for a quick rollback or recovery process becomes paramount, and should be planned for. NB: These are mainly scenarios for handling rollbacks after the transaction has been committed. If a failure is detected during the transaction, the whole transaction can just be rolled back, no problem. There are various options, which we’ll explore in subsequent articles, things like: Immediately restore from backup, Have a pre-tested rollback script (remembering that really this is a “roll-forward” script – there’s not really such a thing as a rollback script for a database!) Have fallback environments – for example, using a blue-green deployment pattern. Different options have pros and cons – some are easier to set up, some require more investment in infrastructure; and of course some work better than others (the key issue with using backups, is loss of the interim transaction data that has been added between the failed deployment and the restore). The best mechanism will be primarily dependent on how your application works and how much you need a cast-iron failsafe mechanism. Actions: Work out an appropriate rollback strategy based on how your application and business works, your appetite for investment and requirements for a completely failsafe process. Development Practices This is perhaps the more difficult area for people to tackle. The process by which you can deploy database updates is actually intrinsically linked with the patterns and practices used to develop that database and linked application. So you need to decide whether you want to implement some changes to the way your developers actually develop the database (particularly schema changes) to make the deployment process easier. A good example is the pattern “Branch by abstraction”. Explained nicely here, by Martin Fowler, this is a process that can be used to make significant database changes (e.g. splitting a table) in a step-wise manner so that you can always roll back, without data loss – by making incremental updates to the database backward compatible. Slides 103-108 of the following slidedeck, from Niek Bartholomeus explain the process: https://speakerdeck.com/niekbartho/orchestration-in-meatspace As these slides show, by making a significant schema change in multiple steps – where each step can be rolled back without any loss of new data – this affords the release team the opportunity to have zero-downtime deployments with considerably less stress (because if an increment goes wrong, they can roll back easily). There are plenty more great patterns that can be implemented – the book Refactoring Databases, by Scott Ambler and Pramod Sadalage is a great read, if this is a direction you want to go in: http://www.amazon.com/Refactoring-Databases-Evolutionary-paperback-Addison-Wesley/dp/0321774515 But the question is – how much of this investment are you willing to make? How often are you making significant schema changes that would require these best practices? Again, there’s a difference here between migrating old projects and starting afresh – with the latter it’s much easier to instigate best practice from the start. Actions: For your business, work out how far down the path you want to go, amending your database development patterns to “best practice”. It’s a trade-off between implementing quality processes, and the necessity to do so (depending on how often you make complex changes). Socialise these changes with your development group. No-one likes having “best practice” changes imposed on them, so good to introduce these ideas and the rationale behind them early.   Summary The next stages of implementing a continuous delivery pipeline for your database changes (once you have CI up and running) require a little pre-planning, if you want to get the most out of the work, and for the implementation to go smoothly. We’ve covered some of the checklist of areas to consider – mainly in the areas of “Getting the team ready for the changes that are coming” and “Planning our your pipeline, environments, patterns and practices for development”, though there will be more detail, depending on where you’re coming from – and where you want to get to. This article is part of our database delivery patterns & practices series on Simple Talk. Find more articles for version control, automated testing, continuous integration & deployment.

  Read the article

• CodePlex Daily Summary for Sunday, August 10, 2014

  CodePlex Daily Summary for Sunday, August 10, 2014Popular ReleasesWinForms MVP: WinForms MVP v1.0.1008.2014: Issues Fixed Issue 1 New Added MessageBus and AppState features. Added tests in support of the MessageBus and AppState features Added dependency injection support for Ninject. Added tests in support of the NinjectPresenterFactory.WP8 Native Access Webserver: Version alpha 0.5.3: Figured I should post a newer version. This build includes pretty broad registry browsing (especially if you can use the AllCapabilities version) and (in the AC version) also fairly broad file system access. It also includes the ability to download .REG files. There have been tons of bugfixes and performance improvements as well, plus a slightly better UI in both the app and the web interface. For more info, please read the forum post here: http://forum.xda-developers.com/showthread.php?t=23...ClosedXML - The easy way to OpenXML: ClosedXML 0.74.0: Many updates. See history.SEToolbox: SEToolbox 01.042.019 Release 1: Added RadioAntenna broadcast name to ship name detail. Added two additional columns for Asteroid material generation for Asteroid Fields. Added Mass and Block number columns to main display. Added Ellipsis to some columns on main display to reduce name confusion. Added correct SE version number in file when saving. Re-added in reattaching Motor when drag/dropping or importing ships (KeenSH have added RotorEntityId back in after removing it months ago). Added option to export and r...Instant Beautiful Browsing: IBB 14.3 Alpha: An alpha release of IBB. After 3 years of the last release this version is made from scratch, with tons of new features like: Make your own IBB aps. HTML 5. Better UI. Extreme Windows 8 resemblance. Photos. Store. Movement TONS of times smother compared to previous versions. Remember that this is AN ALPHA release, I hope I will have "IBB 14" finished by December. The documentation on how to create a new application for IBB will come next monthjQuery List DragSort: jQuery List DragSort 0.5.2: Fixed scrollContainer removing deprecated use of $.browser so should now work with latest version of jQuery. Added the ability to return false in dragEnd to revert sort order Project changes Added nuget package for dragsort https://www.nuget.org/packages/dragsort Converted repository from SVN to MercurialCRM 2013 One Click Navigation: CRM2013OneClickNavigation_1_0_0_4_managed.zip: Fixed some minor issues and added support for the following languages Spanish German French Italian Portuguese Russian Arabic Chinese Japanese Hindi Hebrew Korean Polish ThaiBraintree Client Library: Braintree 2.32.0: Allow credit card verification options to be passed outside of the nonce for PaymentMethod.create Allow billingaddress parameters and billingaddress_id to be passed outside of the nonce for PaymentMethod.create Add Subscriptions to paypal accounts Add PaymentMethod.update Add failonduplicatepaymentmethod option to PaymentMethod.create Add support for dispute webhooksThe Mario Kart 8 App: V1.0.2.1: First Codeplex release. WINDOWS INSTALLER ONLYAspose Java for Docx4j: Aspose.Words vs Docx4j - v 1.0: Release contain the Code Comparison for Features in Docx4j SDK and Aspose.Words What's New ?Following Examples: Accessing Document Properties Add Bookmarks Convert to Formats Delete Bookmarks Working with Comments Feedback and Suggestions Many more examples are available at Aspose Docs. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.File System Security PowerShell Module: NTFSSecurity 2.4.1: Add-Access and Remove-Access now take multiple accoutsYourSqlDba: YourSqlDba 5.2.1.: This version improves alert message that comes a while after you install the script. First it says to get it from YourSqlDba.CodePlex.com If you don't want to update now, just-rerun the script from your installed version. To get actual version running just execute install.PrintVersionInfo. . You can go to source code / history and click on change set 72957 to see changes in the script.Manipulator: Manipulator: manipulatorXNB filetype plugin for Paint.NET: Paint.NET XNB plugin v0.4.0.0: CHANGELOG Reverted old incomplete changes. Updated library for compatibility with Paint .NET 4. Updated project to NET 4.5. Updated version to 0.4.0.0. INSTALLATION INSTRUCTIONS Extract the ZIP file to your Paint.NET\FileTypes folder.EdiFabric: Release 4.1: Changed MessageContextWix# (WixSharp) - managed interface for WiX: Release 1.0.0.0: Release 1.0.0.0 Custom UI Custom MSI Dialog Custom CLR Dialog External UIMath.NET Numerics: Math.NET Numerics v3.2.0: Linear Algebra: Vector.Map2 (map2 in F#), storage-optimized Linear Algebra: fix RemoveColumn/Row early index bound check (was not strict enough) Statistics: Entropy ~Jeff Mastry Interpolation: use Array.BinarySearch instead of local implementation ~Candy Chiu Resources: fix a corrupted exception message string Portable Build: support .Net 4.0 as well by using profile 328 instead of 344. .Net 3.5: F# extensions now support .Net 3.5 as well .Net 3.5: NuGet package now contains pro...Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.11: Virto Commerce Community Edition version 1.11. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes many bug fixes and minor improvements. More details about this release can be found on our blog at http://blog.virtocommerce.com.BoxStarter: Boxstarter 2.4.80: Running the Setup.bat file will install Chocolatey if not present and then install the Boxstarter modules.ProjkyAddin ssms addin script shortcut ssmsaddin: projkyaddin source code and msi files.: projkyaddin source code and msi files.New ProjectsBolos: BolosBWQS - The BitWise Query Service: Generic object queries with a bitwise syntax.DocX Razor: A DocX scaffolding engine with Razor syntaxJQuery Simple Logger: Its a very simple jQuery extension for logging client side events. There are four levels of logging: Error, Warning, Info, Debug ???????: ???????QQ:2281595668，?????，????，????　　?????????????????????，??1998?7??????，??????????，?????????，?????????????，????????????????????????. ????????????????????，????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，?????????: ???????????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，????????????????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ??????QQ:2281595668，?????，????，????。??????????????????，????????。????????????????、???????。??????????????。?????????????????,??????,??????,??????,??????????????，????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ???????????: ??????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，????????????????: ??????QQ:2281595668，?????，????，????　　 ????????????????????，??1998?7??????，??????????，??????? ????????，?????????????， ???????????????????????. ???????????????????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”????????: ??????QQ:2281595668，?????，????，????。??????????????????????????，????????????!??????????????????????????????????????????、???????、????、??????、??????????。???????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ??????????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、???????????????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，???????: ??????????????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????????: ???????????: ????????????: ????????????: ????????????: ????????????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????: ?????????????: ???????QQ：2281595668，?????，????，????。???????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，??????????????: ??????QQ：2281595668，?????，????，????。???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????????: ???????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ???????????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ????????????: ?????????????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”?????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ??????QQ:2281595668，?????，????，????。?????????????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ??????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ:2281595668，?????，????，????　　???????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ?????????????: ??????????????QQ:2281595668，?????，????，????　　?????????????????????，??1998?7??????，??????????，?????????，?????????????，????????????????????????. ??????????????????????: ???????????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????????: ?????QQ:2281595668，?????，????，????　　??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;?????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????????: ??????????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”??????????: ??????QQ:2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，????????????????: ????????????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ?????QQ:2281595668，?????，????，????　　??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，???????: ????????????: ?????????????: hhhtbjzjgh??????: ??????QQ：2281595668，?????，????，????。??????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ???????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ:2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，???????: ??????QQ:2281595668，?????，????，????。??????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，????????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ??????QQ：2281595668，?????，????，????。???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，??????????????????????????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ??????QQ:2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ??????QQ:2281595668，?????，????，????。???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、??????????: ????????????QQ:2281595668，?????，????，????　　???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ:2281595668，?????，????，????　　??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，???????????????????????????????: tybjza?????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，????????????????: ??????QQ:2281595668，?????，????，????。　　??????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，??????????????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,????????: ????????QQ:2281595668，?????，????，????　　?????????????????????????????,?????????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;??????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ????????????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，???????????????????????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ??????QQ:2281595668，?????，????，????。??????????????????????????，????????????!??????????????????????????????????????????、???????、????、??????、??????????。????????????????: ??????QQ:2281595668，?????，????，????。???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ????? QQ:2281595668，?????，????，????。????? ???????????????????，????????????，????? ?98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，????????????????: ???????????: ?????　QQ：2281595668，?????，????，????。?????　?????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，???????????????: ??????QQ:2281595668，?????，????，????。??????????????????，????????。????????????????、???????。??????????????。?????????????????,??????,??????,??????,??????????????，???????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ????????????: ???????QQ:2281595668，?????，????，????　　???????????????????，????????????，????????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????。??????????????????，????????。????????????????、???????。??????????????。?????????????????,??????,??????,??????,??????????????，???????: ??????????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????????: ????????????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ??????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ??????QQ:2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ????????????: ??????QQ:2281595668，?????，????，????。??????????????????，????????。????????????????、???????。??????????????。?????????????????,??????,??????,??????,??????????????，????????: ????????????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,????????????: ??????QQ:2281595668，?????，????，????。??????????????????，????????。????????????????、???????。??????????????。?????????????????,??????,??????,??????,??????????????，???????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ???????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ??????QQ：2281595668，?????，????，????。???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，???????????????????????????????: ????????????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“?????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ??????????: ??????　 ??????　 ??????　 ??????　 ??????　 ?????　 ?????　 ??????　 ?????　 ????????????: ??????QQ:2281595668，?????，????，????。??????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，????????????????: ??????QQ:2281595668，?????，????，????。　　??????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，??????????????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，?????????: ??????QQ:2281595668，?????，????，????。　　??????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，??????????????????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ???????????: ??????QQ:2281595668，?????，????，????。??????????????????????????，????????????!??????????????????????????????????????????、???????、????、??????、??????????。???????????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，?????????: ???????????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,???????????????????: ??????????????QQ:2281595668，?????，????，????　　???????????????????，????????????，????????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????: ??????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????????: ???????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”????????: ???????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ?????QQ:2281595668，?????，????，????　　??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;?????: ??????????QQ:2281595668，?????，????，????　　??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，??????????????????????????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,???????????????????: ??????QQ:2281595668，?????，????，????。???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;?????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ??????QQ:2281595668，?????，????，????。??????????????????，????????。????????????????、???????。??????????????。?????????????????,??????,??????,??????,??????????????，???????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，?????????: ??????QQ:2281595668，?????，????，????。???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;?????????: ????????????: ?????????????: ???????QQ:2281595668，?????，????，????　　????????????????????????????,????????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;??????????: ??????QQ:2281595668，?????，????，????。????????????????????，??????????????，????，?????????????????????，??????。????????，??????????????????????。????????，????????????，?????: ???????????: ?????? ??????: ??????QQ:2281595668，?????，????，????。????????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，????????????: ??????QQ:2281595668，?????，????，????。?????????????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ????????????: ????????????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，???????: ??????????????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，?????????: ????????????QQ:2281595668，?????，????，????　　???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，????????????????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，?????????: ??????QQ：2281595668，?????，????，????。???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、?????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，?????????: ????????????????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，??????????????，????，??????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ??????????: ???????????: ????????????: ??????QQ:2281595668，?????，????，????。???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、???????????: ???????QQ:2281595668，?????，????，????。　　???????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ??????QQ:2281595668，?????，????，????。?????????????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ???????????: ???????????: ?????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ?????，?????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ:2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，????????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，?????????: ????????????: ????????????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,???????????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ???????????: ????????????: ??????QQ：2281595668，?????，????，????。　　???????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，????????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,???????????????????: ????????????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，??????????????: ????????????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????????????: ???????QQ:2281595668，?????，????，????。?????????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ??????????????: ????????QQ:2281595668，?????，????，????　　?????????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ????????????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ????????????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;??????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，???????: ???????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ??????QQ:2281595668，?????，????，????　　???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、??????????: ???????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ?????????: ?????QQ:2281595668，?????，????，????　　???????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，????????: ??????????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”?????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ?????，??????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ??????QQ:2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，???????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，???????????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”?????????: ?????????????????: ??????????????????: ????????????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ????????????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“????????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ????????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ?????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ?????，?????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、???????????????: ??????QQ:2281595668，?????，????，????。???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;?????????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ??????????: ????????????: ????????????: ??????????: ????? QQ:2281595668，?????，????，????。????? ?????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，???????????????: ??????QQ:2281595668，?????，????，????。????????????????????，??????????????，????，?????????????????????，??????。????????，??????????????????????。????????，????????????，??????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，??????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ??????QQ:2281595668，?????，????，????。????????????????????，??????????????，????，?????????????????????，??????。????????，??????????????????????。????????，????????????，????????: ????????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ????????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，??????????????，????，??“???????????: ???????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ??????QQ：2281595668，?????，????，????。????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，?????????????: ???????????: ?????QQ:2281595668，?????，????，????　　??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，???????????????????????????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ????????????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，??????????????: ??????QQ:2281595668，?????，????，????。??????????????????，????????。????????????????、???????。??????????????。?????????????????,??????,??????,??????,??????????????，????????: ????????????: ????????????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“????????: ???????????: ?????????????: ???????QQ:2281595668，?????，????，????。????????????????，?????????????????????，?????????????????????????!???????????????????????????????????????????????、?????????、??????: ??????QQ:2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ???????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，?????????: ??????QQ:2281595668，?????，????，????。??????????????????????????，????????????!??????????????????????????????????????????、???????、????、??????、??????????。????????????????: ??????QQ:2281595668，?????，????，????。????????????????????，??????????????，????，?????????????????????，??????。????????，??????????????????????。????????，????????????，??????: ??????QQ:2281595668，?????，????，????。?????????????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，??????????????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ????????????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，???????: ??????QQ:2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，???????????????: ??????QQ:2281595668，?????，????，????。???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、?????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、???????????????: ??????QQ:2281595668，?????，????，????。???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ?????QQ:2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，???????: ??????QQ:2281595668，?????，????，????。??????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，????????????????: ???????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????????: ????????????: ????????????: ??????QQ:2281595668，?????，????，????。????????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，????????????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????????: ?????QQ:2281595668，?????，????，????　　??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;?????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ??????

  Read the article

• Cluster Node Recovery Using Second Node in Solaris Cluster

  - by Onur Bingul

  Assumptions:Node 0a is the cluster node that has crashed and could not boot anymore.Node 0b is the node in cluster and in production with services active.Both nodes have their boot disk mirrored via SDS/SVM.We have many options to clone the boot disk from node 0b:- make a copy via network using the ufsdump command and pipe to ufsrestore - make a copy inserting the disk locally on node 0b and creating the third mirror with SDS- make a copy inserting the disk locally on node 0b using dd commandIn this procedure we are going to use dd command (from my experience this is the best option).Bare in mind that in the examples provided we work on Sun Fire V240 systems which have SCSI internal disks. In the case of Fibre Channel (FC) internal disks you must pay attention to the unique identifier, or World Wide Name (WWN), associated with each FC disk (in this case take a look at infodoc #40133 in order to recreate the device tree correctly).Procedure:On node 0b the boot disk is c1t0d0 (c1t1d0 mirror) and this is the VTOC:* Partition  Tag  Flags    Sector     Count    Sector  Mount Directory      0      2    00          0   2106432   2106431      1      3    01    2106432  74630784  76737215      2      5    00          0 143349312 143349311      4      7    00   76737216  50340672 127077887      5      4    00  127077888  14683968 141761855      6      0    00  141761856   1058304 142820159      7      0    00  142820160    529152 143349311We will insert the new disk on node 0b and it will be seen as c1t2d0.1) On node 0b we make a copy via dd from disk c1t0d0s2 to disk c1t2d0s2# dd if=/dev/rdsk/c1t0d0s2 of=/dev/rdsk/c1t2d0s2 bs=8192kA copy of a 72GB disk will take approximately about 45 minutes.Note: as an alternative to make identical copy of root over network follow Document ID: 47498Title: Sun[TM] Cluster 3.0: How to Rebuild a node with Veritas Volume Manager2) Perform an fsck on disk c1t2d0 data slices:   1.  fsck -o f /dev/rdsk/c1t2d0s0 (root)   2.  fsck -o f /dev/rdsk/c1t2d0s4 (/var)   3.  fsck -o f /dev/rdsk/c1t2d0s5 (/usr)   4.  fsck -o f /dev/rdsk/c1t2d0s6 (/globaldevices)3) Mount the root file system in order to edit following files for changing the node name:# mount /dev/dsk/c1t2d0s0 /mntChange the hostname from 0b to 0a:# cd /mnt/etc# vi hosts # vi hostname.bge0 # vi hostname.bge2 # vi nodename 4) Change the /mnt/etc/vfstab from the actual:/dev/md/dsk/d201        -       -       swap    -       no      -/dev/md/dsk/d200        /dev/md/rdsk/d200       /       ufs     1       no      -/dev/md/dsk/d205        /dev/md/rdsk/d205       /usr    ufs     1       no      logging/dev/md/dsk/d204        /dev/md/rdsk/d204       /var    ufs     1       no      logging#/dev/md/dsk/d206       /dev/md/rdsk/d206       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/md/dsk/d206        /dev/md/rdsk/d206       /global/.devices/node@2 ufs     2       noglobalto this (unencapsulate disk from SDS/SVM):/dev/dsk/c1t0d0s1        -       -       swap    -       no      -/dev/dsk/c1t0d0s0       /dev/rdsk/c1t0d0s0       /       ufs     1       no      -/dev/dsk/c1t0d0s5       /dev/rdsk/c1t0d0s5       /usr    ufs     1       no      logging/dev/dsk/c1t0d0s4       /dev/rdsk/c1t0d0s4       /var    ufs     1       no      logging#/dev/md/dsk/d206       /dev/md/rdsk/d206       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/dsk/c1t0d0s6       /dev/rdsk/c1t0d0s6       /global/.devices/node@1 ufs     2       no globalIt is important that global device partition (slice 6) in the new vfstab will point to the physical partition of the disk (in our case slice 6).Be careful with the name you use for the new disk. In this case we define it as c1t0d0 because we will insert it as target 0 in node 0a.But this could be different based on the configuration you are working on.5) Remove following entry from /mnt/etc/system (part of unencapsulation procedure):rootdev:/pseudo/md@0:0,200,blk6) Correct the link shared -> ../../global/.devices/node@2/dev/md/shared in order to point to the nodeid of node 0a (in our case nodeid 1):# cd /mnt/dev/mdhow it is now.... node 0b has nodeid 2lrwxrwxrwx   1 root     root          42 Mar 10  2005 shared ->../../global/.devices/node@2/dev/md/shared# rm shared# ln -s ../../global/.devices/node@1/dev/md/shared sharedhow is going to be... with nodeid 1 for node 0alrwxrwxrwx   1 root     root          42 Mar 10  2005 shared ->../../global/.devices/node@1/dev/md/shared7) Change nodeid (in our case from 2 to 1):# cd /mnt/etc/cluster# vi nodeid8) Change the file /mnt/etc/path_to_inst in order to reflect the correct nodeid for node 0a:# cd /mnt/etc# vi path_to_instChange entries from node@2 to node@1 with the vi command ":%s/node@2/node@1/g"9) Write the bootblock to the disk... just in case:# /usr/sbin/installboot /usr/platform/sun4u/lib/fs/ufs/bootblk /dev/rdsk/c1t2d0s0Now the disk is ready to be inserted in node 0a in order to bootup the node.10) Bootup node 0a with command "boot -sx"... this is becasue we need to make some changes in ccr files in order to recreate did environment.11) Modify cluster ccr:# cd /etc/cluster/ccr# rm did_instances# rm did_instances.bak# vi directory - remove the did_instances line.# /usr/cluster/lib/sc/ccradm -i /etc/cluster/ccr/directory # grep ccr_gennum /etc/cluster/ccr/directory ccr_gennum -1 # /usr/cluster/lib/sc/ccradm -i /etc/cluster/ccr/infrastructure # grep ccr_gennum /etc/cluster/ccr/infrastructure ccr_gennum -112) Bring the node 0a down again to the ok prompt and then issue the command "boot -r"Now the node will join the cluster and from scstat and metaset command you can verify functionality. Next step is to encapsulate the boot disk in SDS/SVM and create the mirrors.In our case node 0b has metadevice name starting from d200. For this reason on node 0a we need to create metadevice starting from d100. This is just an example, you can have different names.The important thing to remember is that metadevice boot disks have different names on each node.13) Remove metadevice pointing to the boot and mirror disks (inherit from node 0b):# metaclear -r -f d200# metaclear -r -f d201# metaclear -r -f d204# metaclear -r -f d205# metaclear -r -f d206verify from metastat that no metadevices are set for boot and mirror disks.14) Encapsulate the boot disk:# metainit -f d110 1 1 c1t0d0s0# metainit d100 -m d110# metaroot d10015) Reboot node 0a.16) Create all the metadevice for slices remaining on boot disk# metainit -f d111 1 1 c1t0d0s1# metainit d101 -m d111# metainit -f d114 1 1 c1t0d0s4# metainit d104 -m d114# metainit -f d115 1 1 c1t0d0s5# metainit d105 -m d115# metainit -f d116 1 1 c1t0d0s6# metainit d106 -m d11617) Edit the vfstab in order to specifiy metadevices created:old:/dev/dsk/c1t0d0s1        -       -       swap    -       no      -/dev/md/dsk/d100        /dev/md/rdsk/d100       /       ufs     1       no      -/dev/dsk/c1t0d0s5       /dev/rdsk/c1t0d0s5       /usr    ufs     1       no      logging/dev/dsk/c1t0d0s4       /dev/rdsk/c1t0d0s4       /var    ufs     1       no      logging#/dev/md/dsk/d206       /dev/md/rdsk/d206       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/dsk/c1t0d0s6       /dev/rdsk/c1t0d0s6       /global/.devices/node@1 ufs      2       no  globalnew:/dev/md/dsk/d101        -       -       swap    -       no      -/dev/md/dsk/d100        /dev/md/rdsk/d100       /       ufs     1       no      -/dev/md/dsk/d105        /dev/md/rdsk/d105       /usr    ufs     1       no      logging/dev/md/dsk/d104        /dev/md/rdsk/d104       /var    ufs     1       no      logging#/dev/md/dsk/106       /dev/md/rdsk/d106       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/md/dsk/d106        /dev/md/rdsk/d106       /global/.devices/node@1 ufs     2       noglobal18) Reboot node 0a in order to check new SDS/SVM boot configuration.19) Label the mirror disk c1t1d0 with the VTOC of boot disk c1t0d0:# prtvtoc /dev/dsk/c1t0d0s2 > /var/tmp/VTOC_c1t0d0 # fmthard -s /var/tmp/VTOC_c1t0d0 /dev/rdsk/c1t1d0s220) Put DB replica on slice 7 of disk c1t1d0:# metadb -a -c 3 /dev/dsk/c1t1d0s721) Create metadevice for mirror disk c1t1d0 and attach the new mirror side:# metainit d120 1 1 c1t1d0s0# metattach d100 d120# metainit d121 1 1 c1t1d0s1# metattach d101 d121# metainit d124 1 1 c1t1d0s4# metattach d104 d124# metainit d125 1 1 c1t1d0s5# metattach d105 d125# metainit d126 1 1 c1t1d0s6# metattach d106 d126

  Read the article

• Mouse Clicks, Reactive Extensions and StreamInsight Mashup

  I had an hour spare this afternoon so I wanted to have another play with Reactive Extensions in .Net and StreamInsight.  I also didn’t want to simply use a console window as a way of gathering events so I decided to use a windows form instead. The task I set myself was this. Whenever I click on my form I want to subscribe to the event and output its location to the console window and also the timestamp of the event.  In addition to this I want to know for every mouse click I do, how many mouse clicks have happened in the last 5 seconds. The second point here is really interesting.  I have often found this when working with people on problems.  It is how you ask the question that determines how you tackle the problem.  I will show 2 ways of possibly answering the second question depending on how the question was interpreted. As a side effect of this example I will show how time in StreamInsight can stand still.  This is an important concept and we can see it in the output later. Now to the code.  I will break it all down in this blogpost but you can download the solution and see it all together. I created a Console application and then instantiate a windows form.   frm = new Form(); Thread g = new Thread(CallUI); g.SetApartmentState(ApartmentState.STA); g.Start();   Call UI looks like this   static void CallUI() { System.Windows.Forms.Application.Run(frm); frm.Activate(); frm.BringToFront(); }   Now what we need to do is create an observable from the MouseClick event on the form.  For this we use the Reactive Extensions.   var lblevt = Observable.FromEvent<MouseEventArgs>(frm, "MouseClick").Timestamp();   As mentioned earlier I have two objectives in this example and to solve the first I am going to again use the Reactive extensions.  Let’s subscribe to the MouseClick event and output the location and timestamp to the console. lblevt.Subscribe(evt => { Console.WriteLine("Clicked: {0}, {1} ", evt.Value.EventArgs.Location,evt.Timestamp); }); That should take care of obective #1 but what about the second objective.  For that we need some temporal windowing and this means StreamInsight.  First we need to turn our Observable collection of MouseClick events into a PointStream Server s = Server.Create("Default"); Microsoft.ComplexEventProcessing.Application a = s.CreateApplication("MouseClicks"); var input = lblevt.ToPointStream( a, evt => PointEvent.CreateInsert( evt.Timestamp, new { loc = evt.Value.EventArgs.Location.ToString(), ts = evt.Timestamp.ToLocalTime().ToString() }), AdvanceTimeSettings.IncreasingStartTime);   Now that we have created out PointStream we need to do something with it and this is where we get to our second objective.  It is pretty clear that we want some kind of windowing but what? Here is one way of doing it.  It might not be what you wanted but again it is how the second objective is interpreted   var q = from i in input.TumblingWindow(TimeSpan.FromSeconds(5), HoppingWindowOutputPolicy.ClipToWindowEnd) select new { CountOfClicks = i.Count() };   The above code creates tumbling windows of 5 seconds and counts the number of events in the windows.  If there are no events in the window then no result is output.  Likewise until an event (MouseClick) is issued then we do not see anything in the output (that is not strictly true because it is the CTI strapped to our MouseClick events that flush the events through the StreamInsight engine not the events themselves).  This approach is centred around the windows and not the events.  Until the windows complete and a CTI is issued then no events are pushed through. An alternate way of answering our second question is below   var q = from i in input.AlterEventDuration(evt => TimeSpan.FromSeconds(5)).SnapshotWindow(SnapshotWindowOutputPolicy.Clip) select new { CountOfClicks = i.Count() };   In this code we extend the duration of each MouseClick to five seconds.  We then create  Snapshot Windows over those events.  Snapshot windows are discussed in detail here.  With this solution we are centred around the events.  It is the events that are driving the output.  Let’s have a look at the output from this solution as it may be a little confusing. First though let me show how we get the output from StreamInsight into the Console window. foreach (var x in q.ToPointEnumerable().Where(e => e.EventKind != EventKind.Cti)) { Console.WriteLine(x.Payload.CountOfClicks); }   Ok so now to the output.   The table at the top shows the output from our routine and the table at the bottom helps to explain the output.  One of the things that will help as well is, you will note that for our PointStream we set the issuing of CTIs to be IncreasingStartTime.  What this means is that the CTI is placed right at the start of the event so will not flush the event with which it was issued but will flush those prior to it.  In the bottom table the Blue fill is where we issued a click.  Yellow fill is the duration and boundaries of our events.  The numbers at the bottom indicate the count of events   Clicked 22:40:16                                 Clicked 23:40:18                                 1                                   Clicked 23:40:20                                 2                                   Clicked 23:40:22                                 3                                   2                                   Clicked 23:40:24                                 3                                   2                                   Clicked 23:40:32                                 3                                   2                                   1                                                                                                         secs 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32                                                                                                                                                                                                                         counts   1   2 3 2 3 2 3   2   1           What we can see here in the output is that the counts include all the end edges that have occurred between the mouse clicks.  If we look specifically at the mouse click at 22:40:32. then we see that 3 events are returned to us. These include the following End Edge count at 22:40:25 End Edge count at 22:40:27 End Edge count at 22:40:29 Another thing we notice is that until we actually issue a CTI at 22:40:32 then those last 3 snapshot window counts will never be reported. Hopefully this has helped to explain  a few concepts around StreamInsight and the IObservable() pattern.   You can download this solution from here and play.  You will need the Reactive Framework from here and StreamInsight 1.1

  Read the article

• Problem in creation MDB Queue connection at Jboss StartUp

  - by Amit Ruwali

  I am not able to create a Queue connection in JBOSS4.2.3GA Version & Java1.5, as I am using MDB as per the below details. I am putting this MDB in a jar file(named utsJar.jar) and copied it in deploy folder of JBOSS, In the test env. this MDB works well but in another env. [ env settings and jboss/java ver is same ] it is throwing error at jboss start up [attached below ]. I have searched for this error but couldn't find any solution till now; was there any issue of port confict or something related with configurations ? UTSMessageListner.java @MessageDriven(activationConfig = { @ActivationConfigProperty(propertyName="destinationType", propertyValue="javax.jms.Queue"), @ActivationConfigProperty(propertyName="destination", propertyValue="queue/UTSQueue") }) @TransactionAttribute(TransactionAttributeType.NOT_SUPPORTED) public class UTSMessageListner implements MessageListener { public void onMessage(Message msg) { ObjectMessage objmsg = (ObjectMessage) msg; try { UTSListVO utsMessageListVO = (UTSListVO) objmsg.getObject(); if(utsMessageListVO.getUtsMessageList()!=null) { UtsWebServiceLogger.logMessage("UTSMessageListner:onMessage: SIZE Of UTSMessage List =[" +utsMessageListVO.getUtsMessageList().size() + "]"); UTSDataLayerImpl.getInstance().insertUTSMessage(utsMessageListVO); } else { UtsWebServiceLogger.logMessage("UTSMessageListner:onMessage: Message List is NULL"); } } catch (Exception ex) { UtsWebServiceLogger.logMessage("UTSMessageListner:onMessage: Error Receiving Message"+ExceptionUtility.getStackTrace(ex)); } } } [ I have also attached whole server.log as an attach] /// ///////////////////////////////// Error Trace is Below while starting the server /////////////////////////// 2010-03-12 07:05:40,061 WARN [org.jboss.ejb3.mdb.MessagingContainer] Could not find the queue destination-jndi-name=queue/UTSQueue 2010-03-12 07:05:40,061 WARN [org.jboss.ejb3.mdb.MessagingContainer] destination not found: queue/UTSQueue reason: javax.naming.NameNotFoundException: queue not bound 2010-03-12 07:05:40,061 WARN [org.jboss.ejb3.mdb.MessagingContainer] creating a new temporary destination: queue/UTSQueue 2010-03-12 07:05:40,071 WARN [org.jboss.system.ServiceController] Problem starting service jboss.j2ee:ear=uts.ear,jar=utsJar.jar,name=UTSMessageListner,service=EJB3 java.lang.NullPointerException at org.jboss.mq.server.jmx.DestinationManager.createDestination(DestinationManager.java:336) at org.jboss.mq.server.jmx.DestinationManager.createQueue(DestinationManager.java:293) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94) at org.jboss.mx.server.Invocation.invoke(Invocation.java:86) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659) at org.jboss.ejb3.JmxClientKernelAbstraction.invoke(JmxClientKernelAbstraction.java:44) at org.jboss.ejb3.jms.DestinationManagerJMSDestinationFactory.createDestination(DestinationManagerJMSDestinationFactory.java:75) at org.jboss.ejb3.mdb.MessagingContainer.createTemporaryDestination(MessagingContainer.java:573) at org.jboss.ejb3.mdb.MessagingContainer.createDestination(MessagingContainer.java:512) at org.jboss.ejb3.mdb.MessagingContainer.innerCreateQueue(MessagingContainer.java:438) at org.jboss.ejb3.mdb.MessagingContainer.jmsCreate(MessagingContainer.java:400) at org.jboss.ejb3.mdb.MessagingContainer.innerStart(MessagingContainer.java:166) at org.jboss.ejb3.mdb.MessagingContainer.start(MessagingContainer.java:152) at org.jboss.ejb3.mdb.MDB.start(MDB.java:126) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.ejb3.ServiceDelegateWrapper.startService(ServiceDelegateWrapper.java:103) at org.jboss.system.ServiceMBeanSupport.jbossInternalStart(ServiceMBeanSupport.java:289) at org.jboss.system.ServiceMBeanSupport.jbossInternalLifecycle(ServiceMBeanSupport.java:245) at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94) at org.jboss.mx.server.Invocation.invoke(Invocation.java:86) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659) at org.jboss.system.ServiceController$ServiceProxy.invoke(ServiceController.java:978) at $Proxy0.start(Unknown Source) at org.jboss.system.ServiceController.start(ServiceController.java:417) at sun.reflect.GeneratedMethodAccessor10.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94) at org.jboss.mx.server.Invocation.invoke(Invocation.java:86) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659) at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:210) at $Proxy53.start(Unknown Source) at org.jboss.ejb3.JmxKernelAbstraction.install(JmxKernelAbstraction.java:120) at org.jboss.ejb3.Ejb3Deployment.registerEJBContainer(Ejb3Deployment.java:301) at org.jboss.ejb3.Ejb3Deployment.start(Ejb3Deployment.java:362) at org.jboss.ejb3.Ejb3Module.startService(Ejb3Module.java:91) at org.jboss.system.ServiceMBeanSupport.jbossInternalStart(ServiceMBeanSupport.java:289) at org.jboss.system.ServiceMBeanSupport.jbossInternalLifecycle(ServiceMBeanSupport.java:245) at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94) at org.jboss.mx.server.Invocation.invoke(Invocation.java:86) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659) at org.jboss.system.ServiceController$ServiceProxy.invoke(ServiceController.java:978) at $Proxy0.start(Unknown Source) at org.jboss.system.ServiceController.start(ServiceController.java:417) at sun.reflect.GeneratedMethodAccessor10.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94) at org.jboss.mx.server.Invocation.invoke(Invocation.java:86) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659) at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:210) at $Proxy33.start(Unknown Source) at org.jboss.ejb3.EJB3Deployer.start(EJB3Deployer.java:512) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94) at org.jboss.mx.interceptor.AbstractInterceptor.invoke(AbstractInterceptor.java:133) at org.jboss.mx.server.Invocation.invoke(Invocation.java:88) at org.jboss.mx.interceptor.ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor.java:142) at org.jboss.mx.interceptor.DynamicInterceptor.invoke(DynamicInterceptor.java:97) at org.jboss.system.InterceptorServiceMBeanSupport.invokeNext(InterceptorServiceMBeanSupport.java:238) at org.jboss.wsf.container.jboss42.DeployerInterceptor.start(DeployerInterceptor.java:87) at org.jboss.deployment.SubDeployerInterceptorSupport$XMBeanInterceptor.start(SubDeployerInterceptorSupport.java:188) at org.jboss.deployment.SubDeployerInterceptor.invoke(SubDeployerInterceptor.java:95) at org.jboss.mx.server.Invocation.invoke(Invocation.java:88) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659) at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:210) at $Proxy34.start(Unknown Source) at org.jboss.deployment.MainDeployer.start(MainDeployer.java:1025) at org.jboss.deployment.MainDeployer.start(MainDeployer.java:1015) at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:819) at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:782) at sun.reflect.GeneratedMethodAccessor20.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94) at org.jboss.mx.interceptor.AbstractInterceptor.invoke(AbstractInterceptor.java:133) at org.jboss.mx.server.Invocation.invoke(Invocation.java:88) at org.jboss.mx.interceptor.ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor.java:142) at org.jboss.mx.server.Invocation.invoke(Invocation.java:88) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659) at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:210) at $Proxy9.deploy(Unknown Source) at org.jboss.deployment.scanner.URLDeploymentScanner.deploy(URLDeploymentScanner.java:421) at org.jboss.deployment.scanner.URLDeploymentScanner.scan(URLDeploymentScanner.java:634) at org.jboss.deployment.scanner.AbstractDeploymentScanner$ScannerThread.doScan(AbstractDeploymentScanner.java:263) at org.jboss.deployment.scanner.AbstractDeploymentScanner.startService(AbstractDeploymentScanner.java:336) at org.jboss.system.ServiceMBeanSupport.jbossInternalStart(ServiceMBeanSupport.java:289) at org.jboss.system.ServiceMBeanSupport.jbossInternalLifecycle(ServiceMBeanSupport.java:245) at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94) at org.jboss.mx.server.Invocation.invoke(Invocation.java:86) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659) at org.jboss.system.ServiceController$ServiceProxy.invoke(ServiceController.java:978) at $Proxy0.start(Unknown Source) at org.jboss.system.ServiceController.start(ServiceController.java:417) at sun.reflect.GeneratedMethodAccessor10.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94) at org.jboss.mx.server.Invocation.invoke(Invocation.java:86) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659) at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:210) at $Proxy4.start(Unknown Source) at org.jboss.deployment.SARDeployer.start(SARDeployer.java:304) at org.jboss.deployment.MainDeployer.start(MainDeployer.java:1025) at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:819) at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:782) at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:766) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94) at org.jboss.mx.interceptor.AbstractInterceptor.invoke(AbstractInterceptor.java:133) at org.jboss.mx.server.Invocation.invoke(Invocation.java:88) at org.jboss.mx.interceptor.ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor.java:142) at org.jboss.mx.server.Invocation.invoke(Invocation.java:88) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659) at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:210) at $Proxy5.deploy(Unknown Source) at org.jboss.system.server.ServerImpl.doStart(ServerImpl.java:482) at org.jboss.system.server.ServerImpl.start(ServerImpl.java:362) at org.jboss.Main.boot(Main.java:200) at org.jboss.Main$1.run(Main.java:508) at java.lang.Thread.run(Thread.java:595)

  Read the article

• struts2-json-plugin not retrieving json data from action class for Struts-JQuery-Plugin grid

  - by thebravedave

  Hello, Im having an issue getting json working with the struts-jquery-plugin-2.1.0 I have included the struts2-json-plugin-2.1.8.1 in my classpath as well. Im sure that I have my struts-jquery-plugin configured correctly because the grid loads, but doesnt load the data its supposed to get from the action class that has been json'ized. The documentation with the json plugin and the struts-jquery plugin leaves ALOT of gaps that I cant even find with examples/tutorials, so I come to the community at stackoverflow. My action class has a property called gridModel thats a List with a basic POJO called Customer. Customer is a pojo with one property, id. I have a factory that supplies the populated List to the actions List property which i mentioned called gridModel. Heres how i set up my struts.xml file: <constant name="struts.devMode" value="true"/> <constant name="struts.objectFactory" value="guice"/> <package name="org.webhop.ywdc" namespace="/" extends="struts-default,json-default"> <result-types> <result-type name="json" class="com.googlecode.jsonplugin.JSONResult"> </result-type> </result-types> <action name="login" class="org.webhop.ywdc.LoginAction" > <result type="json"></result> <result name="success" type="dispatcher">/pages/uiTags/Success.jsp</result> <result name="error" type="redirect">/pages/uiTags/Login.jsp</result> <interceptor-ref name="cookie"> <param name="cookiesName">JSESSIONID</param> </interceptor-ref> </action> <action name="logout" class="org.webhop.ywdc.LogoutAction" > <result name="success" type="redirect">/pages/uiTags/Login.jsp</result> </action> </package> In the struts.xml file i set the and in my action i listed in the action configuration. Heres my jsp page that the action loads: <%@ taglib prefix="s" uri="/struts-tags" % <%@ taglib prefix="sj" uri="/struts-jquery-tags"% <%@ taglib prefix="sjg" uri="/struts-jquery-grid-tags"% <%@ page language="java" contentType="text/html" import="java.util.*"% Welcome, you have logged in! <s:url id="remoteurl" action="login"/> <sjg:grid id="gridtable" caption="Customer Examples" dataType="json" href="%{remoteurl}" pager="false" gridModel="gridModel" > <sjg:gridColumn name="id" key="true" index="id" title="ID" formatter="integer" sortable="false"/> </sjg:grid> Welcome, you have logged in. <br /> <b>Session Time: </b><%=new Date(session.getLastAccessedTime())%> <h2>Password:<s:property value="password"/></h2> <h2>userId:<s:property value="userId"/></h2> <br /> <a href="<%= request.getContextPath() %>/logout.action">Logout</a><br /><br /> ID: <s:property value="id"/> session id: <s:property value="JSESSIONID"/> </body> Im not really sure how to tell what json the json plugin is creating from the action class. If i did know how i could tell if it wasnt formed properly. As far as I know if I specificy in my action configuration in struts.xml, that the grid, which is set to read json and knows to look for "gridModel" will then automatically load the json to the grid, but its not. Heres my action class: public class LoginAction extends ActionSupport { public String JSESSIONID; public int id; private String userId; private String password; public Members member; public List<Customer> gridModel; public String execute() { Cookie cookie = new Cookie("ywdcsid", password); cookie.setMaxAge(3600); HttpServletResponse response = ServletActionContext.getResponse(); response.addCookie(cookie); HttpServletRequest request = ServletActionContext.getRequest(); Cookie[] ckey = request.getCookies(); for(Cookie c: ckey) { System.out.println(c.getName() + "/cookie_name + " + c.getValue() + "/cookie_value"); } Map requestParameters = ActionContext.getContext().getParameters();//getParameters(); String[] testString = (String[])requestParameters.get("password"); String passwordString = testString[0]; String[] usernameArray = (String[])requestParameters.get("userId"); String usernameString = usernameArray[0]; Injector injector = Guice.createInjector(new GuiceModule()); HibernateConnection connection = injector.getInstance(HibernateConnection.class); AuthenticationServices currentService = injector.getInstance(AuthenticationServices.class); currentService.setConnection(connection); currentService.setInjector(injector); member = currentService.getMemberByUsernamePassword(usernameString, passwordString); userId = member.getUsername(); password = member.getPassword(); CustomerFactory customerFactory = new CustomerFactory(); gridModel = customerFactory.getCustomers(); if(member == null) { return ERROR; } else { id = member.getId(); Map session = ActionContext.getContext().getSession(); session.put(usernameString, member); return SUCCESS; } } public String logout() throws Exception { Map session = ActionContext.getContext().getSession(); session.remove("logged-in"); return SUCCESS; } public List<Customer> getGridModel() { return gridModel; } public void setGridModel(List<Customer> gridModel) { this.gridModel = gridModel; } public String getPassword() { return password; } public void setPassword(String password) { this.password = password; } public String getUserId() { return userId; } public void setUserId(String userId) { this.userId = userId; } public String getJSESSIONID() { return JSESSIONID; } public void setJSESSIONID(String jsessionid) { JSESSIONID = jsessionid; } } Please help me with this problem. You will make my week, as this is a major bottleneck for me :( thanks so much, thebravedave

  Read the article

• Implementation of ZipCrypto / Zip 2.0 encryption in java

  - by gomesla

  I'm trying o implement the zipcrypto / zip 2.0 encryption algoritm to deal with encrypted zip files as discussed in http://www.pkware.com/documents/casestudies/APPNOTE.TXT I believe I've followed the specs but just can't seem to get it working. I'm fairly sure the issue has to do with my interpretation of the crc algorithm. The documentation states CRC-32: (4 bytes) The CRC-32 algorithm was generously contributed by David Schwaderer and can be found in his excellent book "C Programmers Guide to NetBIOS" published by Howard W. Sams & Co. Inc. The 'magic number' for the CRC is 0xdebb20e3. The proper CRC pre and post conditioning is used, meaning that the CRC register is pre-conditioned with all ones (a starting value of 0xffffffff) and the value is post-conditioned by taking the one's complement of the CRC residual. Here is the snippet that I'm using for the crc32 public class PKZIPCRC32 { private static final int CRC32_POLYNOMIAL = 0xdebb20e3; private int crc = 0xffffffff; private int CRCTable[]; public PKZIPCRC32() { buildCRCTable(); } private void buildCRCTable() { int i, j; CRCTable = new int[256]; for (i = 0; i <= 255; i++) { crc = i; for (j = 8; j > 0; j--) if ((crc & 1) == 1) crc = (crc >>> 1) ^ CRC32_POLYNOMIAL; else crc >>>= 1; CRCTable[i] = crc; } } private int crc32(byte buffer[], int start, int count, int lastcrc) { int temp1, temp2; int i = start; crc = lastcrc; while (count-- != 0) { temp1 = crc >>> 8; temp2 = CRCTable[(crc ^ buffer[i++]) & 0xFF]; crc = temp1 ^ temp2; } return crc; } public int crc32(int crc, byte buffer) { return crc32(new byte[] { buffer }, 0, 1, crc); } } Below is my complete code. Can anyone see what I'm doing wrong. package org.apache.commons.compress.archivers.zip; import java.io.IOException; import java.io.InputStream; public class ZipCryptoInputStream extends InputStream { public class PKZIPCRC32 { private static final int CRC32_POLYNOMIAL = 0xdebb20e3; private int crc = 0xffffffff; private int CRCTable[]; public PKZIPCRC32() { buildCRCTable(); } private void buildCRCTable() { int i, j; CRCTable = new int[256]; for (i = 0; i <= 255; i++) { crc = i; for (j = 8; j > 0; j--) if ((crc & 1) == 1) crc = (crc >>> 1) ^ CRC32_POLYNOMIAL; else crc >>>= 1; CRCTable[i] = crc; } } private int crc32(byte buffer[], int start, int count, int lastcrc) { int temp1, temp2; int i = start; crc = lastcrc; while (count-- != 0) { temp1 = crc >>> 8; temp2 = CRCTable[(crc ^ buffer[i++]) & 0xFF]; crc = temp1 ^ temp2; } return crc; } public int crc32(int crc, byte buffer) { return crc32(new byte[] { buffer }, 0, 1, crc); } } private static final long ENCRYPTION_KEY_1 = 0x12345678; private static final long ENCRYPTION_KEY_2 = 0x23456789; private static final long ENCRYPTION_KEY_3 = 0x34567890; private InputStream baseInputStream = null; private final PKZIPCRC32 checksumEngine = new PKZIPCRC32(); private long[] keys = null; public ZipCryptoInputStream(ZipArchiveEntry zipEntry, InputStream inputStream, String passwd) throws Exception { baseInputStream = inputStream; // Decryption // ---------- // PKZIP encrypts the compressed data stream. Encrypted files must // be decrypted before they can be extracted. // // Each encrypted file has an extra 12 bytes stored at the start of // the data area defining the encryption header for that file. The // encryption header is originally set to random values, and then // itself encrypted, using three, 32-bit keys. The key values are // initialized using the supplied encryption password. After each byte // is encrypted, the keys are then updated using pseudo-random number // generation techniques in combination with the same CRC-32 algorithm // used in PKZIP and described elsewhere in this document. // // The following is the basic steps required to decrypt a file: // // 1) Initialize the three 32-bit keys with the password. // 2) Read and decrypt the 12-byte encryption header, further // initializing the encryption keys. // 3) Read and decrypt the compressed data stream using the // encryption keys. // Step 1 - Initializing the encryption keys // ----------------------------------------- // // Key(0) <- 305419896 // Key(1) <- 591751049 // Key(2) <- 878082192 // // loop for i <- 0 to length(password)-1 // update_keys(password(i)) // end loop // // Where update_keys() is defined as: // // update_keys(char): // Key(0) <- crc32(key(0),char) // Key(1) <- Key(1) + (Key(0) & 000000ffH) // Key(1) <- Key(1) * 134775813 + 1 // Key(2) <- crc32(key(2),key(1) >> 24) // end update_keys // // Where crc32(old_crc,char) is a routine that given a CRC value and a // character, returns an updated CRC value after applying the CRC-32 // algorithm described elsewhere in this document. keys = new long[] { ENCRYPTION_KEY_1, ENCRYPTION_KEY_2, ENCRYPTION_KEY_3 }; for (int i = 0; i < passwd.length(); ++i) { update_keys((byte) passwd.charAt(i)); } // Step 2 - Decrypting the encryption header // ----------------------------------------- // // The purpose of this step is to further initialize the encryption // keys, based on random data, to render a plaintext attack on the // data ineffective. // // Read the 12-byte encryption header into Buffer, in locations // Buffer(0) thru Buffer(11). // // loop for i <- 0 to 11 // C <- buffer(i) ^ decrypt_byte() // update_keys(C) // buffer(i) <- C // end loop // // Where decrypt_byte() is defined as: // // unsigned char decrypt_byte() // local unsigned short temp // temp <- Key(2) | 2 // decrypt_byte <- (temp * (temp ^ 1)) >> 8 // end decrypt_byte // // After the header is decrypted, the last 1 or 2 bytes in Buffer // should be the high-order word/byte of the CRC for the file being // decrypted, stored in Intel low-byte/high-byte order. Versions of // PKZIP prior to 2.0 used a 2 byte CRC check; a 1 byte CRC check is // used on versions after 2.0. This can be used to test if the password // supplied is correct or not. byte[] encryptionHeader = new byte[12]; baseInputStream.read(encryptionHeader); for (int i = 0; i < encryptionHeader.length; i++) { encryptionHeader[i] ^= decrypt_byte(); update_keys(encryptionHeader[i]); } } protected byte decrypt_byte() { byte temp = (byte) (keys[2] | 2); return (byte) ((temp * (temp ^ 1)) >> 8); } @Override public int read() throws IOException { // // Step 3 - Decrypting the compressed data stream // ---------------------------------------------- // // The compressed data stream can be decrypted as follows: // // loop until done // read a character into C // Temp <- C ^ decrypt_byte() // update_keys(temp) // output Temp // end loop int read = baseInputStream.read(); read ^= decrypt_byte(); update_keys((byte) read); return read; } private final void update_keys(byte ch) { keys[0] = checksumEngine.crc32((int) keys[0], ch); keys[1] = keys[1] + (byte) keys[0]; keys[1] = keys[1] * 134775813 + 1; keys[2] = checksumEngine.crc32((int) keys[2], (byte) (keys[1] >> 24)); } }

  Read the article

• How and where to implement basic authentication in Kibana 3

  - by Jabb

  I have put my elasticsearch server behind a Apache reverse proxy that provides basic authentication. Authenticating to Apache directly from the browser works fine. However, when I use Kibana 3 to access the server, I receive authentication errors. Obviously because no auth headers are sent along with Kibana's Ajax calls. I added the below to elastic-angular-client.js in the Kibana vendor directory to implement authentication quick and dirty. But for some reason it does not work. $http.defaults.headers.common.Authorization = 'Basic ' + Base64Encode('user:Password'); What is the best approach and place to implement basic authentication in Kibana? /*! elastic.js - v1.1.1 - 2013-05-24 * https://github.com/fullscale/elastic.js * Copyright (c) 2013 FullScale Labs, LLC; Licensed MIT */ /*jshint browser:true */ /*global angular:true */ 'use strict'; /* Angular.js service wrapping the elastic.js API. This module can simply be injected into your angular controllers. */ angular.module('elasticjs.service', []) .factory('ejsResource', ['$http', function ($http) { return function (config) { var // use existing ejs object if it exists ejs = window.ejs || {}, /* results are returned as a promise */ promiseThen = function (httpPromise, successcb, errorcb) { return httpPromise.then(function (response) { (successcb || angular.noop)(response.data); return response.data; }, function (response) { (errorcb || angular.noop)(response.data); return response.data; }); }; // check if we have a config object // if not, we have the server url so // we convert it to a config object if (config !== Object(config)) { config = {server: config}; } // set url to empty string if it was not specified if (config.server == null) { config.server = ''; } /* implement the elastic.js client interface for angular */ ejs.client = { server: function (s) { if (s == null) { return config.server; } config.server = s; return this; }, post: function (path, data, successcb, errorcb) { $http.defaults.headers.common.Authorization = 'Basic ' + Base64Encode('user:Password'); console.log($http.defaults.headers); path = config.server + path; var reqConfig = {url: path, data: data, method: 'POST'}; return promiseThen($http(angular.extend(reqConfig, config)), successcb, errorcb); }, get: function (path, data, successcb, errorcb) { $http.defaults.headers.common.Authorization = 'Basic ' + Base64Encode('user:Password'); path = config.server + path; // no body on get request, data will be request params var reqConfig = {url: path, params: data, method: 'GET'}; return promiseThen($http(angular.extend(reqConfig, config)), successcb, errorcb); }, put: function (path, data, successcb, errorcb) { $http.defaults.headers.common.Authorization = 'Basic ' + Base64Encode('user:Password'); path = config.server + path; var reqConfig = {url: path, data: data, method: 'PUT'}; return promiseThen($http(angular.extend(reqConfig, config)), successcb, errorcb); }, del: function (path, data, successcb, errorcb) { $http.defaults.headers.common.Authorization = 'Basic ' + Base64Encode('user:Password'); path = config.server + path; var reqConfig = {url: path, data: data, method: 'DELETE'}; return promiseThen($http(angular.extend(reqConfig, config)), successcb, errorcb); }, head: function (path, data, successcb, errorcb) { $http.defaults.headers.common.Authorization = 'Basic ' + Base64Encode('user:Password'); path = config.server + path; // no body on HEAD request, data will be request params var reqConfig = {url: path, params: data, method: 'HEAD'}; return $http(angular.extend(reqConfig, config)) .then(function (response) { (successcb || angular.noop)(response.headers()); return response.headers(); }, function (response) { (errorcb || angular.noop)(undefined); return undefined; }); } }; return ejs; }; }]); UPDATE 1: I implemented Matts suggestion. However, the server returns a weird response. It seems that the authorization header is not working. Could it have to do with the fact, that I am running Kibana on port 81 and elasticsearch on 8181? OPTIONS /solar_vendor/_search HTTP/1.1 Host: 46.252.46.173:8181 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:25.0) Gecko/20100101 Firefox/25.0 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: de-de,de;q=0.8,en-us;q=0.5,en;q=0.3 Accept-Encoding: gzip, deflate Origin: http://46.252.46.173:81 Access-Control-Request-Method: POST Access-Control-Request-Headers: authorization,content-type Connection: keep-alive Pragma: no-cache Cache-Control: no-cache This is the response HTTP/1.1 401 Authorization Required Date: Fri, 08 Nov 2013 23:47:02 GMT WWW-Authenticate: Basic realm="Username/Password" Vary: Accept-Encoding Content-Encoding: gzip Content-Length: 346 Connection: close Content-Type: text/html; charset=iso-8859-1 UPDATE 2: Updated all instances with the modified headers in these Kibana files root@localhost:/var/www/kibana# grep -r 'ejsResource(' . ./src/app/controllers/dash.js: $scope.ejs = ejsResource({server: config.elasticsearch, headers: {'Access-Control-Request-Headers': 'Accept, Origin, Authorization', 'Authorization': 'Basic XXXXXXXXXXXXXXXXXXXXXXXXXXXXX=='}}); ./src/app/services/querySrv.js: var ejs = ejsResource({server: config.elasticsearch, headers: {'Access-Control-Request-Headers': 'Accept, Origin, Authorization', 'Authorization': 'Basic XXXXXXXXXXXXXXXXXXXXXXXXXXXXX=='}}); ./src/app/services/filterSrv.js: var ejs = ejsResource({server: config.elasticsearch, headers: {'Access-Control-Request-Headers': 'Accept, Origin, Authorization', 'Authorization': 'Basic XXXXXXXXXXXXXXXXXXXXXXXXXXXXX=='}}); ./src/app/services/dashboard.js: var ejs = ejsResource({server: config.elasticsearch, headers: {'Access-Control-Request-Headers': 'Accept, Origin, Authorization', 'Authorization': 'Basic XXXXXXXXXXXXXXXXXXXXXXXXXXXXX=='}}); And modified my vhost conf for the reverse proxy like this <VirtualHost *:8181> ProxyRequests Off ProxyPass / http://127.0.0.1:9200/ ProxyPassReverse / https://127.0.0.1:9200/ <Location /> Order deny,allow Allow from all AuthType Basic AuthName “Username/Password” AuthUserFile /var/www/cake2.2.4/.htpasswd Require valid-user Header always set Access-Control-Allow-Methods "GET, POST, DELETE, OPTIONS, PUT" Header always set Access-Control-Allow-Headers "Content-Type, X-Requested-With, X-HTTP-Method-Override, Origin, Accept, Authorization" Header always set Access-Control-Allow-Credentials "true" Header always set Cache-Control "max-age=0" Header always set Access-Control-Allow-Origin * </Location> ErrorLog ${APACHE_LOG_DIR}/error.log </VirtualHost> Apache sends back the new response headers but the request header still seems to be wrong somewhere. Authentication just doesn't work. Request Headers OPTIONS /solar_vendor/_search HTTP/1.1 Host: 46.252.26.173:8181 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:25.0) Gecko/20100101 Firefox/25.0 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: de-de,de;q=0.8,en-us;q=0.5,en;q=0.3 Accept-Encoding: gzip, deflate Origin: http://46.252.26.173:81 Access-Control-Request-Method: POST Access-Control-Request-Headers: authorization,content-type Connection: keep-alive Pragma: no-cache Cache-Control: no-cache Response Headers HTTP/1.1 401 Authorization Required Date: Sat, 09 Nov 2013 08:48:48 GMT Access-Control-Allow-Methods: GET, POST, DELETE, OPTIONS, PUT Access-Control-Allow-Headers: Content-Type, X-Requested-With, X-HTTP-Method-Override, Origin, Accept, Authorization Access-Control-Allow-Credentials: true Cache-Control: max-age=0 Access-Control-Allow-Origin: * WWW-Authenticate: Basic realm="Username/Password" Vary: Accept-Encoding Content-Encoding: gzip Content-Length: 346 Connection: close Content-Type: text/html; charset=iso-8859-1 SOLUTION: After doing some more research, I found out that this is definitely a configuration issue with regard to CORS. There are quite a few posts available regarding that topic but it appears that in order to solve my problem, it would be necessary to to make some very granular configurations on apache and also make sure that the right stuff is sent from the browser. So I reconsidered the strategy and found a much simpler solution. Just modify the vhost reverse proxy config to move the elastisearch server AND kibana on the same http port. This also adds even better security to Kibana. This is what I did: <VirtualHost *:8181> ProxyRequests Off ProxyPass /bigdatadesk/ http://127.0.0.1:81/bigdatadesk/src/ ProxyPassReverse /bigdatadesk/ http://127.0.0.1:81/bigdatadesk/src/ ProxyPass / http://127.0.0.1:9200/ ProxyPassReverse / https://127.0.0.1:9200/ <Location /> Order deny,allow Allow from all AuthType Basic AuthName “Username/Password” AuthUserFile /var/www/.htpasswd Require valid-user </Location> ErrorLog ${APACHE_LOG_DIR}/error.log </VirtualHost>

  Read the article

< Previous Page | 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027  | Next Page >