Search Results

Search found 11331 results on 454 pages for 'resource monitor'.

Page 103/454 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

• Setting up two screens in Xorg

  - by viraptor

  I'be got two Nvidia cards, but Xorg activates only one of them. The following config is based on the nvidia configurator output: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" LeftOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Module" Load "dbe" Load "extmod" Load "type1" Load "freetype" Load "glx" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "HP LE2201w" HorizSync 24.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Acer AL2017" HorizSync 30.0 - 82.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Card0" Driver "nvidia" VendorName "nVidia Corporation" BoardName "GeForce 6100 nForce 405" BusID "PCI:0:13:0" EndSection Section "Device" Identifier "Card1" Driver "nvidia" VendorName "nVidia Corporation" BoardName "GeForce 8400 GS" BusID "PCI:2:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection What I see in the log file is: (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 11:08:08 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Layout0" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (==) No device specified for screen "Screen0". Using the first device section listed. (**) | |-->Device "Card0" (**) |-->Screen "Screen1" (1) (**) | |-->Monitor "Monitor1" (==) No device specified for screen "Screen1". Using the first device section listed. (**) | |-->Device "Card0" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "Mouse0" (**) Option "Xinerama" "0" (==) Automatically adding devices (==) Automatically enabling devices even though later on both cards are detected: (--) PCI:*(0:0:13:0) 10de:03d1:1019:2601 nVidia Corporation C61 [GeForce 6100 nForce 405] rev 162, Mem @ 0xfb000000/16777216, 0xd0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072 (--) PCI: (0:2:0:0) 10de:0422:0000:0000 nVidia Corporation G86 [GeForce 8400 GS] rev 161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/131072 [ --- some more logs --- ] (II) Mar 19 11:08:10 NVIDIA(0): NVIDIA GPU GeForce 6100 nForce 405 (C61) at PCI:0:13:0 (II) Mar 19 11:08:10 NVIDIA(0): (GPU-0) [ --- some more logs --- ] (II) Mar 19 11:08:12 NVIDIA(GPU-1): NVIDIA GPU GeForce 8400 GS (G86) at PCI:2:0:0 (GPU-1) Unfortunately later on only one card is initialised and one screen is active. Xrandr shows only one screen too. Any ideas on how to fix it?

  Read the article

• DVI vs VGA on Windows 7

  - by Joe Philllips

  I have a 3 monitor setup (each monitor is exactly the same). Two videocards, each with one splitter (one DVI and one VGA). I have two monitors hooked up using DVI and the third is connected through the VGA connection. I am running Windows 7. If I resize a window from one DVI monitor to the other, it's not a problem. It does so very smoothly. If I resize a window on the VGA monitor it is extremely choppy. Why? It's not choppy on other machines with only VGA connections. Has anyone else noticed this?

  Read the article

• What is wrong with the following Fluent NHibernate Mapping ?

  - by ashraf

  Hi, I have 3 tables (Many to Many relationship) Resource {ResourceId, Description} Role {RoleId, Description} Permission {ResourceId, RoleId} I am trying to map above tables in fluent-nHibernate. This is what I am trying to do. var aResource = session.Get<Resource>(1); // 2 Roles associated (Role 1 and 2) var aRole = session.Get<Role>(1); aResource.Remove(aRole); // I try to delete just 1 role from permission. But the sql generated here is (which is wrong) Delete from Permission where ResourceId = 1 Insert into Permission (ResourceId, RoleId) values (1, 2); Instead of (right way) Delete from Permission where ResourceId = 1 and RoleId = 1 Why nHibernate behave like this? What wrong with the mapping? I even tried with Set instead of IList. Here is the full code. Entities public class Resource { public virtual string Description { get; set; } public virtual int ResourceId { get; set; } public virtual IList<Role> Roles { get; set; } public Resource() { Roles = new List<Role>(); } } public class Role { public virtual string Description { get; set; } public virtual int RoleId { get; set; } public virtual IList<Resource> Resources { get; set; } public Role() { Resources = new List<Resource>(); } } Mapping Here // Mapping .. public class ResourceMap : ClassMap<Resource> { public ResourceMap() { Id(x => x.ResourceId); Map(x => x.Description); HasManyToMany(x => x.Roles).Table("Permission"); } } public class RoleMap : ClassMap<Role> { public RoleMap() { Id(x => x.RoleId); Map(x => x.Description); HasManyToMany(x => x.Resources).Table("Permission"); } } Program static void Main(string[] args) { var factory = CreateSessionFactory(); using (var session = factory.OpenSession()) { using (var tran = session.BeginTransaction()) { var aResource = session.Get<Resource>(1); var aRole = session.Get<Role>(1); aResource.Remove(aRole); session.Save(a); session.Flush(); tran.Commit(); } } } private static ISessionFactory CreateSessionFactory() { return Fluently.Configure() .Database(MsSqlConfiguration.MsSql2008 .ConnectionString("server=(local);database=Store;Integrated Security=SSPI")) .Mappings(m => m.FluentMappings.AddFromAssemblyOf<Program>() .Conventions.Add<CustomForeignKeyConvention>()) .BuildSessionFactory(); } public class CustomForeignKeyConvention : ForeignKeyConvention { protected override string GetKeyName(FluentNHibernate.Member property, Type type) { return property == null ? type.Name + "Id" : property.Name + "Id"; } } Thanks, Ashraf.

  Read the article

• Windows Color Calibrator Does Not Retain Color Settings

  - by Zian Choy

  When I try to calibrate the monitor using Windows 7's color calibrator, the monitor rejects changes to the color settings. For example, one of my monitors has a blueish tinge. If I click my mouse to tone down the blue and then let go of my mouse the monitor will go back to being blueish. At the moment, I am getting around the problem by using the color controls in the monitor's on screen displays. How can I get the color calibrator to work? Update: I tried checking the color settings in the ATI Radeon Catalyst Control Center and noticed that I can't do anything. The "Reactivate ATI color controls" button keeps flashing and any changes I try to make are discarded instantly.

  Read the article

• Can I get my video card to output a DVI and VGA signal at the same time?

  - by Roy Pardee

  Hey All, I've got: a lovely 24" monitor, w/both DVI and VGA inputs, a personal desktop w/a Radeon HD Pro 2400 video card (both DVI and VGA outputs) a work laptop w/both outputs, and a KVM switch that handles VGA only Right now I've got laptop connected to the monitor's VGA, and the desktop connected to the DVI. This works, but requires me to switch the KVM and monitor input sources separately, which annoys me (I switch back & forth a lot to make skype calls & manage my music). I'd like to feed both VGA and DVI signals out of my desktop so I can do quick things on my desktop & switch right back, but then when I'm done working, switch the monitor over to DVI to get the crisper picture. Alas, just attaching both VGA and DVI cables to my desktop's video card did not do the trick. Can this card be persuaded to output both signals at the same time? Many thanks! -Roy

  Read the article

• getting Error while set up the connection pool in jboss

  - by Yashwant Chavan

  Hi as per following Connection pool configuration facing some issue. Place a copy of mysql-connector-java-[version]-bin.jar in $JBOSS_HOME/server/all/lib. Then, follow the example configuration file named mysql-ds.xml in the $JBOSS_HOME/docs/examples/jca directory that comes with a JBoss binary installation. To activate your DataSource, place an xml file that follows the format of mysql-ds.xml in the deploy subdirectory in either $JBOSS_HOME/server/all, $JBOSS_HOME/server/default, or $JBOSS_HOME/server/[yourconfig] as appropriate. I am getting following error resource-ref: jdbc/buinessCaliberDb has no valid JNDI binding. Check the jboss-web/resource-ref. This is my mysql-ds.xml <datasources> <local-tx-datasource> <jndi-name>jdbc/buinessCaliberDb</jndi-name> <connection-url>jdbc:mysql:///BUSINESS</connection-url> <driver-class>com.mysql.jdbc.Driver</driver-class> <user-name>root</user-name> <password>password</password> <exception-sorter-class-name>org.jboss.resource.adapter.jdbc.vendor.MySQLExceptionSorter</exception-sorter-class-name> <!-- should only be used on drivers after 3.22.1 with "ping" support <valid-connection-checker-class-name>org.jboss.resource.adapter.jdbc.vendor.MySQLValidConnectionChecker</valid-connection-checker-class-name> --> <!-- sql to call when connection is created <new-connection-sql>some arbitrary sql</new-connection-sql> --> <!-- sql to call on an existing pooled connection when it is obtained from pool - MySQLValidConnectionChecker is preferred for newer drivers <check-valid-connection-sql>some arbitrary sql</check-valid-connection-sql> --> <!-- corresponding type-mapping in the standardjbosscmp-jdbc.xml (optional) --> <metadata> <type-mapping>mySQL</type-mapping> </metadata> </local-tx-datasource> </datasources> and this my web.xml entry <resource-ref> <description>DB Connection</description> <res-ref-name>jdbc/buinessCaliberDb</res-ref-name> <res-type>javax.sql.DataSource</res-type> <res-auth>Container</res-auth> </resource-ref> and this jboss-web.xml entry <jboss-web> <resource-ref> <description>DB Connection</description> <res-ref-name>jdbc/buinessCaliberDb</res-ref-name> <res-type>javax.sql.DataSource</res-type> <res-auth>Container</res-auth> </resource-ref> </jboss-web> Please help

  Read the article

• How do I enable greedy MigrationHeuristic in Karmic?

  - by Matthew

  My laptop performs very poorly for 2d graphics. For example, Docky's zoom effect and compiz effects are very choppy. In Jaunty, I was able to fix this by adding the following line under the "Device" section in my xorg.conf: Option "MigrationHeuristic" "greedy" In Karmic, there is no xorg.conf by default, so I copied my old one (from Jaunty). However, everything is still slow. Here is my xorg.conf: Section "Device" Identifier "Configured Video Device" Option "MigrationHeuristic" "greedy" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection From googling about, it sounds like "MigrationHeuristic" is only an option for the "EXA" mode, while Karmic has switched the intel driver to "UXA". So I tried adding this line under the "Device" section: Option "AccelMethod" "exa" But this didn't help.

  Read the article

• Stick floating eclipse windows on second screen with Mac OS 10.9 Mavericks

  - by James

  When working with eclipse, I'm used to have a floating window with the console and other views on my secondary monitor. Since the update to OSX 10.9 (Mavericks), I still can drag the floating window to the secondary screen, but it keeps popping back to the main monitor when e.g. changing the perspective - which is really annoying. This did not happen with Mac OS 10.8. Is there a way that the floating windows of eclipse stay on the secondary monitor?

  Read the article

• How do I configure permissions for a cluster share using Powershell on 2008?

  - by Andrew J. Brehm

  I have a cluster resource of type "file share" but when I try to configure the "security" parameter I get the following error (excerpt): Set-ClusterParameter : Parameter 'security' does not exist on the cluster object Using cluster.exe I get a better result, namely the usual nothing when the command worked. But when I check in Failover Cluster Manager the permissions have not changed. In Server 2003 the cluster.exe method worked. Any ideas? Update: Entire command and error. PS C:\> $resource=get-clusterresource testshare PS C:\> $resource Name State Group ResourceType ---- ----- ----- ------------ testshare Offline Test File Share PS C:\> $resource|set-clusterparameter security "domain\account,grant,f" Set-ClusterParameter : Parameter 'security' does not exist on the cluster object 'testshare'. If you are trying to upda te an existing parameter, please make sure the parameter name is specified correctly. You can check for the current par ameters by passing the .NET object received from the appropriate Get-Cluster* cmdlet to "| Get-ClusterParameter". If yo u are trying to update a common property on the cluster object, you should set the property directly on the .NET object received by the appropriate Get-Cluster* cmdlet. You can check for the current common properties by passing the .NET o bject received from the appropriate Get-Cluster* cmdlet to "| fl *". If you are trying to create a new unknown paramete r, please use -Create with this Set-ClusterParameter cmdlet. At line:1 char:31 + $resource|set-clusterparameter <<<< security "domain\account,grant,f" + CategoryInfo : NotSpecified: (:) [Set-ClusterParameter], ClusterCmdletException + FullyQualifiedErrorId : Set-ClusterParameter,Microsoft.FailoverClusters.PowerShell.SetClusterParameterCommand

  Read the article

• Broken fonts in Konsole KDE 4.3.4

  - by depesz

  I have a strange situation - after some upgrades a couple of days ago fonts in KDE Konsole broke. To make it more specific - standard fonts look more or less OK, but when I use my national characters (like acelnsózz) they all look broken - like from another font, or badly scaled. The same problem doesn't exist in GNOME Terminal. I usually use the Terminus font, so I used this for demonstration, but it shows in other fonts as well - if that will be necessary I will provide list. Konsole shot: GNOME Terminal shot: As for my settings: =$ cat /etc/X11/xorg.conf Section "Device" Identifier "Builtin Default intel Device 0" Driver "intel" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Screen" Identifier "Builtin Default intel Screen 0" Device "Builtin Default intel Device 0" Monitor "Monitor0" EndSection Section "InputDevice" Identifier "touchpad" Driver "synaptics" Option "CorePointer" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default intel Screen 0" InputDevice "touchpad" EndSection =$ xdpyinfo | grep -E resolution\|dimensions dimensions: 1680x1050 pixels (444x277 millimeters) resolution: 96x96 dots per inch I tried forcing DPI in system settings (to 120), or adding monitor size to xorg.conf - so far nothing helped. Any idea on what should I do to make it work sanely again?

  Read the article

• Broken fonts in konsole kde 4.3.4

  - by depesz

  I have strange situation - after some upgrade couple of days ago fonts in KDE konsole broke. To make it more specific - standard fonts look more or less ok, but when I use my national characters (like acelnsózz) they all look broken - like from another font, or badly scaled. The same problem doesn't exist in gnome-terminal. I usually use Terminus font, so I used this for demonstration, but it shows in other fonts as well - if that will be necessary I will provide list. Konsole shot: gnome-terminal shot: As for my settings: =$ cat /etc/X11/xorg.conf Section "Device" Identifier "Builtin Default intel Device 0" Driver "intel" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Screen" Identifier "Builtin Default intel Screen 0" Device "Builtin Default intel Device 0" Monitor "Monitor0" EndSection Section "InputDevice" Identifier "touchpad" Driver "synaptics" Option "CorePointer" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default intel Screen 0" InputDevice "touchpad" EndSection =$ xdpyinfo | grep -E resolution\|dimensions dimensions: 1680x1050 pixels (444x277 millimeters) resolution: 96x96 dots per inch I tried forcing DPI in system settings (to 120), or adding monitor size to xorg.conf - so far nothing helped. Any idea on what should I do to make it work sanely again?

  Read the article

• Windows 8: Different Themes or Different Wallpaper Slideshows for Multiple Monitors

  - by Robith Nuriel Haq

  I know I can assign different wallpaper for each monitor that is connected to my computer in Windows 8(by right clicking and selecting "set for monitor 1,2,etc"), but I don't know how to assign different wallpaper slideshow or different theme for each monitor. Can anyone tell me how to do that? It is quite interesting to see different wallpapers on different monitors, but seeing static wallpaper on each of those monitors is no fun. thanks

  Read the article

• Intel motherboard drops HDMI output after Windows boots

  - by Nick

  I have an Intel motherboard (DH67CL) that uses Intel HD 3000 video. It has two video output ports: HDMI and DVI. Both my monitors are DVI, so I have two cables: a DVI-DVI and an HDMI-DVI. If I plug a monitor into just one of these ports, things work fine. But if I plug monitors into each of the ports, the system startup screens show on both monitors, along with the "Starting Windows..." screen, but as soon as the system boots into Windows, the HDMI-connected monitor goes to sleep. When I use the Intel video control panel, the HDMI-connected monitor is not detected. How do I get a dual-monitor setup to work?

  Read the article

• NEC MultiSync Resolution Problem

  - by PhilPursglove

  I have a slightly odd issue with my monitor, an NEC MultiSync LCD1970NXp. I'm running Windows 7 Ultimate on a Toshiba Tecra M5 laptop, and according to Windows Update I have the latest drivers. When I restart the laptop on the docking station at work with the monitor attached, it runs under 1024x800, but the optimum resolution for the monitor is 1280x1024, which isn't an available resolution in the Windows Screen Resolution dialog. If I restart the laptop undocked e.g. at home, it goes to 1280x1024, which is the resolution of the laptop screen. If I subsequently hibernate it and then wake it up on the docking station, the monitor then quite happily displays at 1280x1024. Can anyone suggest what the problem might be, or a method by which I can restart on the docking station and still get 1280x1024.

  Read the article

• What is causing sudden freezing during running real-time program?

  - by Trevor Boyd Smith

  So I run a high intensive (CPU/GPU) real-time program. During normal execution suddenly everything freezes for 1-4 seconds. I opened "Process Explorer" in the background to help gain insight and maybe identify something. Here is what the CPU/GPU graphs looks like when I align them in time: Notice the 4 distinct drops in both the CPU/GPU. You can see that it goes from some sort of positive CPU/GPU usage to almost zero. These drops in the graph align with when the real-time program suddenly freezes. How do I find what is causing these sudden drops? NOTE: When you put your mouse over the graph it tells you the time, accurate to the second, for where your cursor is. Maybe this mouse over feature could be helpful in some way (e.g. what if you had a log of all processes every 100ms). EDIT: The real-time program is a video game and so I can't watch some sort of instrumentation while the video game is running. I need a solution that let's you look back in time somehow to see what was happening when the slow down occurred. EDIT: RE - Recording Data vs using real-time monitor: So the windows performance recorder is for some reason not recording what I expect it to record. So I switched to using "perfmon" and then opening it's "resource monitor". RE - Setting it up so I can view real-time monitor: In the video game I set it to spectate and then put the video game in "windowed" mode so that I can view the real time display that Resource Monitor has. Now that I can get semi-real time (only once per second... how do you get more than once per second?) I started looking at the various real time data readouts. Getting to the cause: I noticed a strong correlation in high disk IO and low CPU usage (which is also seen by having in-game freezing). How do you use resource monitor to find out who is doing all this offending disk IO?

  Read the article

• Sun Grid Engine (SGE) / limiting simultaneous array job sub-tasks

  - by wfaulk

  I am installing a Sun Grid Engine environment and I have a scheduler limit that I can't quite figure out how to implement. My users will create array jobs that have hundreds of sub-tasks. I would like to be able to limit those jobs to only running a set number of tasks at the same time, independent of other jobs. Like I might have one array job that I want to run 20 tasks at a time, and another I want to run 50 tasks at a time, and yet another that I'm fine running without limit. It seems like this ought to be doable, but I can't figure it out. There's a max_aj_instances configuration option, but that appears to apply globally to all array jobs. I can't see any way to use consumable resources, as I'd need a "complex attribute" that is per-job, and that feature doesn't seem to exist. It didn't look like resource quotas would work, but now I'm not so sure of that. It says "A resource quota set defines a maximum resource quota for a particular job request", but it's unclear if an array job's sub-tasks' resource requests will be aggregated for the purposes of the resource quota. I'm going to play with this, but hopefully someone already knows outright.

  Read the article

• Font configuration on Linux dual-head configuration with DPI's at 90 and 150:

  - by Jason Tholstrup

  I have a laptop with a 15" screen and a resolution of 1920 X 1200 and a 22" external monitor running at 1680 X 1050. This means the laptop runs with a dpi of 150 and the monitor runs at a dpi of 90. Is there anyway to get the fonts on the laptop to be readable while keeping the fonts on the monitor from being gigantic?

  Read the article

• Utility to put taskbar on multiple monitors with task grouping?

  - by davr

  Right now I use UltraMon to extend my taskbar across multiple monitors. So windows on the first monitor show up on the taskbar on the first monitor, and windows on the second monitor show up on the taskbar on the second monitor. However, UltraMon does not support "Task Grouping", a feature in Windows since XP. Basically if you have many windows open, it will group together windows from the same app in a single taskbar entry. So if I have 22 explorer windows open, I'll only see a single explorer entry, and if I click it, a menu of the 22 windows shows up. Ultramon doesn't support this, instead I see 22 taskbar entries. Are there any utilities (or built in to windows 7 ways?) that will extend the taskbar across multiple monitors, and support task grouping on the secondary monitors?

  Read the article

• 3 Monitors 2 different graphic cards

  - by Michael

  I am looking to add a third monitor to my workstation. I currently have 2 monitors connected to a geforce gt 120. I am wanting to find the cheapest solution on adding another monitor, I have a old ati x300 laying around and wanting to know if I would be able to use that to power the other monitor and if it would conflict with my other graphic card (I am not a gamer). What I want to do is have the at x300 power 1 monitor via dvi and the gt 120 power 2 monitors via vga and dvi. Thanks edit: im running windows 7 64bit

  Read the article

• Exchange 2003 message store monitoring

  - by Tyrrell Cornwall

  Can Exchange 2003 monitor the message store (status, alerts, thresholds) or is there another way on the sever to monitor the store?

  Read the article

• Laptop VGA Output Stopped Working

  - by Jack7890

  I regularly use an external monitor with my laptop. Today, when I booted up, the external monitor refused to work--it just keeps going into power save mode. I tried a different external monitor and had the same problem, so it must be a problem with the laptop itself. Things I've tried: Going into the Display Settings via the Control Panel (I'm running Vista) and attaching/unattaching/reattaching the external monitor. Turning the computer off, unplugging, plugging it back in, and rebooting Blowing into the VGA out to get rid of any dust Toggling through the Fn+F7 options I'm thinking maybe this is an issue with my video card? If necessary, I'm comfortable opening up my laptop and playing around with things, but I'm not sure what to look for. Does anyone have any suggestions?

  Read the article

• Laptop VGA Out Stopped Working

  - by Jack7890

  I regularly use an external monitor with my laptop. Today, when I booted up, the external monitor refused to work--it just keeps going into power save mode. I tried a different external monitor and had the same problem, so it must be a problem with the laptop itself. Things I've tried: Going into the Display Settings via the Control Panel (I'm running Vista) and attaching/unattaching/reattaching the external monitor. Turning the computer off, unplugging, plugging it back in, and rebooting Blowing into the VGA out to get rid of any dust Toggling through the Fn+F7 options I'm thinking maybe this is an issue with my video card? If necessary, I'm comfortable opening up my laptop and playing around with things, but I'm not sure what to look for. Does anyone have any suggestions?

  Read the article

• Where is the xorg.conf file in Karmic Koala (Ubuntu 9.10) ?

  - by jfmessier

  I am trying to change this xorg.conf file that I used to modify under Ubuntu 9.04, so it can have the higher resolutions of my monitor. Under 9.04, the monitor was unknown, and I had to key in all resolutions in the file, and although it is found under 9.10, 9.10 does not have the highest resolution that My monitor can sustain. How can I change such setting ? Is xorg.conf moved, or replaced ? Merci :-) JF

  Read the article

• Boot sequence unlike reboot

  - by samgoody

  When I turn on the computer it acts very differently than when I reboot it. [WinXP Pro, Intel Core2 6600, 2.4GHZ, 2GB RAM, NVIDA GeForce] Boot: Monitor must be plugged into the motherboard or no image. Screen resolution 800x600. Changes to the resolution cause only the top half of the screen to be usable, and are lost when I shut down the computer. Desktop icons arranged in neat rows on left of desktop. Nothing of note in system tray In Device Manger - Display adapter: Intel(R) Q965/Q963 Express Chipset Family In Device Manger - Monitors, two monitors are listed Hibernate and standby work. Reboot: Monitor must be plugged into the graphics card or no image. Screen resolution - 1280x1024 Desktop icons arranged in the cute circle that I put them in. NVIDIA icon shows in system tray. In Device Manger - Display adapter: NVIDA GeForce 6200LE In Device Manger - Monitors, one monitor is listed Hibernate and standby do not work. When awakened after a hibernation it says: The system could not be restarted from its previous location because the restoration image is corrupt. Delete restoration data & proceed to system boot? Double reboot (inconsistent): Monitor must be plugged into the graphics card. Screen resolution - 1024x768 Odd icon shows in system tray whose tooltip says "Intel Graphics" For a while my morning ritual was to boot, wait, reboot using (alt+ctrl+del - ctrl+u - R), wait. Keeping the monitor plugged into the graphics card. But aside for the inefficiency of this method, I sometimes want to standby and can't. On the other hand, the computer is unusable when set to 800x600. Please help, anyone?

  Read the article

• Need to hookup HP dv7-3085dx with Nvidia GeForce GT 230M to my Dell 30 inch LCD 3007WFP at max resol

  - by user14660

  I recently bought an HP laptop (dv7-3085dx) (http://reviews.cnet.com/laptops/hp-pavilion-dv7-3085dx/4505-3121_7-33776108.html) which is supposed to have a pretty good video card (NVIDIA GeForce GT 230M). The card is supposed to output a max resolution of 2560x1600 which is also the max resolution of my monitor (http://www.ubergizmo.com/15/archives/2006/02/dell_3007wfp_on_dell_2001fp_action_8_megapixel_desktop.html). Now I bought an HDMI to dual link dvi (http://www.amazon.com/gp/product/B002KKLYDK/ref=oss_product) cable...this is after Best Buy's 70 dollar hdmi to dvi (perhaps it was 'single' link?) didn't give me the best resolution. In windows 7, when I try to set the max resolution for my 30 in monitor, I only get 1280x800...which is absurd. The monitor is great, I love the laptop and the video card supposedly supports such resolutions. So I can't figure out why I'm not getting better resolution (by the way, when i "detect" my monitor in windows 7, it is shown correctly as DELL 3007WFP!).

  Read the article

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >