Search Results

Search found 32252 results on 1291 pages for 'software services'.

Page 1048/1291 | < Previous Page | 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055  | Next Page >

• Can't install SB750 RAID drivers in Windows 7 for two additional storage drives

  - by jf46

  Mobo: ASUS M4A79XTD, 790X/SB750 OS: Windows 7 x64 I currently have SATA 1-4 set to RAID and SATA 5-6 set to IDE. I have an SSD connected to SATA5 with Windows 7 installed on it, and that works fine. I also have configured a RAID 1 array of two 1TB HDDs, connected to SATA 1 and 2. These don't show up in Windows, and I'm having trouble getting the RAID driver installed. I even tried booting from the Windows DVD and repairing or installing Windows, but when I navigated to the relevant .sys files on my motherboard's driver CD, Windows setup told me that the files in question weren't relevant to my hardware. To be clear: I'm not trying to install Windows on a RAID. I have Windows installed on a separate disk on a separate SATA controller. I just want to get the SB750 RAID drivers installed so that the Windows disk utility can see my RAID 1 array, which is composed of two other disks. Do I need to wipe my SSD and reinstall Windows to get the RAID driver installed? That seems kind of ridiculous, and given what I described above, I'm not even sure it would work. Any help or guidance would be appreciated - thanks! Edit: Also, I've copied the driver files from the mobo CD into system32 and rebooted, no luck. Then I changed HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorV\Start from 3 to 0, and that didn't work either.

  Read the article

• Windows typeperf and pound signs.

  - by Weegee

  I'm currently trying to use typeperf to access some Windows performance counters. Unfortunately, a few of the instances I'm trying to check are of the format service#1. The command typeperf "\\server\Process(service#1)\Working Set Peak" is unfortunately returning the data for \\server\Process(service)\Working Set Peak rather than the data for the instance service#1. This holds true for any of the services that have pound signs in the counter string. Does anyone know of a method to get around this problem? Sample output: I:\>typeperf -s server "\Process(service#1)\Working Set" "(PDH-CSV 4.0)","\\server\Process(service)\Working Set" "10/08/2009 09:37:29.070","1643274240.000000" "10/08/2009 09:37:30.070","1643274240.000000" "10/08/2009 09:37:31.070","1643274240.000000" The command completed successfully. I:\>typeperf -s server "\Process(service#2)\Working Set" "(PDH-CSV 4.0)","\\server\Process(service)\Working Set" "10/08/2009 09:37:39.273","1643274240.000000" "10/08/2009 09:37:40.273","1643274240.000000" "10/08/2009 09:37:41.273","1643274240.000000" "10/08/2009 09:37:42.273","1643274240.000000" "10/08/2009 09:37:43.273","1643274240.000000" The command completed successfully. I can confirm in PerfMon that the Working Set value "1643274240.000000" is incorrect for both service#1 and service#2. I am running Windows XP Service Pack 2, but a co-worker who is running Windows Server 2003 was having the same troubles.

  Read the article

• windows 2003 under Hyper-V - can't send/receive ping

  - by glaucon

  I've installed Windows 2003 x64 R2 SP2 under Hyper-V (the Windows Pro 8 edition). I have a NIC configured but I can't move any traffic on it. In particular I can't send or receive Pings. Scoreboard There is a second VM running Ubuntu under the Windows 8 host which is able to send and receive pings from the host O/S . When I try to ping from Windows 2003 guest to Windows 8 host I get 'Request Timed Out'. When I try to ping from Windows 8 host to Windows 2003 guest I get 'Reply from 192.168.10.107 Destination Host Unreachable'. There's no problem pinging from the Ubuntu guest to the Windows 8 host and no problem pinging from the Windows 8 host to the Unbuntu guest. Environment Integration services are installed on Windows 2003. The windows 2003 needs a static IP address of 192.168.10.15. The Windows 2003 ipconfig output looks like this : While the host o/s ipconfig output looks like this : Event Logs The only things I can see in the event logs which is (a) looks signifcant and (b) is not related to the lack of networking is this : I'm not sure if that's significant or not. Hyper-V and NICs When the Windows 2003 guest was first booted it had no NIC; I subsequently added a 'Legacy Network Connector' which I couldn't get Windows 2003 to recognise; I subsequently removed that and added a 'Standard Network Connector' and at least on the surface this works ... only it doesn't. 'Virtual Network Type' is external. Although I've only mentioned ping there's no other evidence of network activity. 'Allow incoming echo request' is enabled on the Windows 2003 guest. HELP ? What else should I look at or do to resolve this problem ? EDIT 1: I should have said that I turned off the firewall on the W2003 server for a while and retested the pings; same result.

  Read the article

• Only one domains not resolving via Windows DNS server at multiple locations, but is at others

  - by Brett G

  I'm having quite a weird issue. Had mail delivery issues to a specific domain. After looking closer, I realized that the DNS for that domain isn't resolving via the in-house Windows 2003 SP2 DNS server. C:\>nslookup foodmix.net Server: DC.DOMAIN.com Address: 10.1.1.1 DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. *** Request to DC.DOMAIN.com timed-out (DC.DOMAIN.com and 10.1.1.1 are generic values to replace the actual ones) Even if I run this nslookup from the DC.DOMAIN.com server, I get the same result. However, all other requests are working as they should. I tried it on severs at completely separate organizations on different networks(Windows 2003 AD servers). The weird thing is some of these were having the same exact issue. However using public DNS servers work. I have tried clearing the DNS cache, restarting the server, restarting the services, etc. Nothing has worked. One weird event I noticed in the DNS Server Event Logs that might be related is an event ID of 5504 with the following description: The DNS server encountered an invalid domain name in a packet from 192.33.4.12. The packet will be rejected. The event data contains the DNS packet. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. In the data section below, I can see the following mentioned: ns2.webhostingstar.com Which happens to be the nameserver for the domain in question. Several discussion threads and a MS KB have pointed to disabling EDNS. I have done this via "dnscmd /config /enableednsprobes 0" and it has not fixed the issue.

  Read the article

• Code won't work under mono, any ideas whats wrong?

  - by JL

  Mono won't fire the following code: I get internal server error 500, error writing request error. Code works perfectly under normal .net.... any ideas why its broken and how to fix it? [WebServiceBinding] public class testService : System.Web.Services.Protocols.SoapHttpClientProtocol { private string DummySoapRequest = @"<?xml version=""1.0"" encoding=""utf-8""?> <soap:Envelope xmlns:soap=""http://schemas.xmlsoap.org/soap/envelope/"" xmlns:xsi=""http://www.w3.org/2001/XMLSchema-instance"" xmlns:xsd=""http://www.w3.org/2001/XMLSchema""> <soap:Body> <DummyOperation xmlns=""http://mynamespace.com""> </DummyOperation> </soap:Body> </soap:Envelope>"; public void SendDummyRequest() { System.Net.WebRequest req = GetWebRequest(new Uri(Url)); req.Headers.Add("SOAPAction", ""); req.ContentType = "text/xml;charset=\"utf-8\""; req.Method = "POST"; using (Stream stm = req.GetRequestStream()) { using (StreamWriter stmw = new StreamWriter(stm)) { stmw.Write(DummySoapRequest); } } System.Net.WebResponse response = req.GetResponse(); } }

  Read the article

• New AD-DC in a new Site is refusing cross-site IPv4 connections

  - by sysadmin1138

  We just added a new Server 2008 (sp2) Domain Controller in a new Site, our first such config. It's over a VPN gateway WAN (10Mbit). Unfortunately it is displaying a strange network symptom. Connections to the SMB ports (TCP/139 and TCP/445) are being actively refused... if the connection is coming in on pure IPv4. If the incoming connection is coming by way of the 6to4 tunnel those connections establish and work just fine. It isn't the Firewall, since this behavior can be replicated with the firewall turned off. Also, it's actually issuing RST packets to connection attempts; something that only happens with a Windows Firewall if there is a service behind a port and the service itself denies access. I doubt it's some firewall device on the wire, since the server this one replaced was running Samba and access to it from our main network functioned just fine. I'm thinking it might have something to do with the Subnet lists in AD Sites & Services, but I'm not sure. We haven't put any IPv6 addresses in there, just v4, and it's the v4 connections that are being denied. Unfortunately, I can't figure this out. We need to be able to talk to this DC from the main campus. Is there some kind of site-based SMB-level filtering going on? I can talk to the DC's on campus just fine, but that's over that v6 tunnel. I don't have access to a regular machine on that remote subnet, which limits my ability to test.

  Read the article

• MySQL taking a long time to start

  - by Dscoduc

  I'm running Windows Server 2008 with MySQL installed and every time I reboot the server the MySQL Service doesn't start right away. A look into the Windows Eventlog shows that the MySQL Service was hung at startup. Looking at the Services.msc console shows the service state at Starting... Eventually, like 10 minutes, the MySQL Service actually finishes the startup process and the database becomes available for my Wordpress server... I looked at the MySQL .err files and didn't find anything that would indicate a delay in the statup process... Can anyone suggest a way to determine what is causing the delay, and more importantly, how to prevent the delay in the MySQL Startup? UPDATE: Here is the .err log contents from the shutdown to the startup complete. Notice the startup begins at 10:30:00 and the MySQL isn't ready for connections until 10:47:14, a full 17 minutes later: 100322 10:27:06 [Note] C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld: Normal shutdown 100322 10:27:06 [Note] Event Scheduler: Purging the queue. 0 events 100322 10:27:06 InnoDB: Starting shutdown... 100322 10:27:08 InnoDB: Shutdown completed; log sequence number 4 3854351346 100322 10:27:08 [Warning] Forcing shutdown of 1 plugins 100322 10:27:08 [Note] C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld: Shutdown complete 100322 10:30:00 [Note] Plugin 'FEDERATED' is disabled. 100322 10:30:01 InnoDB: Started; log sequence number 4 3854351346 100322 10:47:14 [Note] Event Scheduler: Loaded 0 events 100322 10:47:14 [Note] C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld: ready for connections. UPDATE 2: MySQL is configured as a service (part of the install process, nothing I did) and executes the following syntax (as it appears in the registry): "C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld" --defaults-file="C:\Program Files\MySQL\MySQL Server 5.1\my.ini" MySQL

  Read the article

• How do I get "Back to My Mac" (using MobileMe) from Windows?

  - by benzado

  I have a MobileMe subscription and a Mac at home with "Back to My Mac" enabled. When I'm away from home, this service lets me use another Mac to connect to my Mac back home and access file sharing, screen sharing, etc. As far as I know, the service doesn't use any proprietary protocols, so in theory I should also be able to get "Back to My Mac" from a Windows PC. This MacWorld article explains how it works. Basically, it uses Wide-Area Bonjour to give your Mac a domain name like hostname.username.members.mac.com. Remote computers can find your Mac using that address, then connect to it using a private VPN. The "Wide Area Bonjour" part seems to make it a little more complicated than simply a regular domain name, though. Note that I'm not interested in using the methods described by LifeHacker, which doesn't use the MobileMe service at all. I don't want to use a totally different dynamic DNS service. I'd like to use the one I'm already paying for, or at least find out why that's not possible from Windows. Also, my primary problem is finding a network route back to my mac... once I've got that I know how to enable services so that Windows can talk to it. UPDATE: Based on some additional research, it appears that Apple is only assigning IPv6 addresses to the hostname.username.members.mac.com names. So any solution will require enabling IPv6 support on Windows, if possible.

  Read the article

• NIS user not being added to NIS group

  - by Brian

  I have set up a NIS server and several NIS clients. I have a user and a group on the NIS server like so: /etc/passwd: myself:x:5000:5000:,,,:/home/myself:/bin/bash /etc/group: fishy:x:3001:otheruser,etc,myself,moreppl I imported the users and groups on the NIS client by adding +:::::: to /etc/passwd and +::: to /etc/group. I can log in to the NIS client, but when I run groups, fishy is not listed. But getent group fishy shows that it was imported correctly and lists me as a member. And if I do sudo su - myself, then suddenly groups says I am in the group! I also had nscd installed, and the groups worked correctly for a while. It seemed like after being logged in for a while, I would silently be dropped out of the group. If I restarted nscd and logged in again, then the groups worked correctly...for a while. There are no UID or GID conflicts with local users or groups. Update: Contents of /etc/nsswitch.conf: passwd: compat group: compat shadow: compat hosts: files nis dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis aliases: nis files

  Read the article

• Backup and Archive Strategy Question

  - by OneNerd

  I am having trouble finding a backup strategy for our code assets that 'just works' without any manual intervention. Goal is to have an off-site backup (a synchronized one) so that when we check-in files, create builds, etc. to the network drive, the entire folder structure is automatically synchronized and backed-up (in real time, or 1x per day) at some off-site location so if our office blows up, we don't lose all of our data. I have looked into some online backup services, but have not yet had any success. Some are quirky/buggy, others limit file size and/or kinds of files (which doesn't work well for developer files). Everything gets checked in and saved to a single server (on a Raid Mirror), so we just need to have a folder on that server backed up/synchronized to some off-site location. So my question is this. What are you using for your off-site backup strategy. What software, system, or service? Is there a be-all/end-all system of backing up your code assets that I just haven't found yet? Thanks

  Read the article

• Need help diagnosing my machine

  - by Tom Collins

  I have something that just slows my computer to a crawl sometimes. Not running anything big. Yesterday all I had running (besides background apps) were Firefox & Windows Explorer and could barely even switch screens. Nothing showing up in the task manager as hogging CPUs. I have all non-essential services stopped (MySQl & MSSQL) unless I need them. I made some restore points not long ago, but they disappeared. This is a development mach with a LOT of apps installed, so I really, really do not want to re-install Windows. So, what I'm looking for are ideas or tools I can use to help diagnose this problem. The only clues I have is this started right after I installed Office 2013 (with Office 2010 still installed as well) installed Visual Studio 2012 (also keeping 2010 as a co-install) and installed MSSQL 2012 (upgrade from 2008, no co-install) Also, computer runs fine in Safe Mode. I've just ran out of ideas of what to check. Any help / suggestions would much appreciated. Thanks P.S. I'm running Win 7 Pro (x64). Office is also 64 bit. Visual Studio & MSSQL are 64 bit if that option was available (not sure).

  Read the article

• When pointing to new DNS servers is there any chance of E-mails being lost if the old E-mail hosting service is still up?

  - by LaserBeak

  I am changing webhosts and will be using the new hosts mail servers instead of the old ones. I have created all the correctly named mailboxes on the new service but have also not yet cut ties with the old webhost. I am expecting that even if the new DNS values which point to the new hosts DNS servers and respective SOA\zone file with the new MX values have not yet propagated and an E-mail is directed at the old hosts mail servers as per the mx records in the SOA\zone records which the old hosting provider holds, the E-mail would still come through to the mailbox that's on the old host providers mail servers. So I am just trying to reaffirm if I got this right and it's essentially impossible for me to loose an E-mail since it will hit either the old hosts mail servers or the new ones ? Also is it possible to configure the same E-mail account to check and collect mail from different mail servers by entering multiple pop3 addresses ? And if I choose to keep the old web hosts mail hosting services as a backup by specifying the mx records for it with a lower priority in the SOA records hosted by the new webhost, is it possible to have any incoming E-mails sent to both servers by the mail daemon so I have two copies? Or is my only option having the primary mail server forward the E-mail somehow to the old mailserver ?

  Read the article

• Routing a single request through multiple nginx backend apps

  - by Jonathan Oliver

  I wanted to get an idea if anything like the following scenario was possible: Nginx handles a request and routes it to some kind of authentication application where cookies and/or other kinds of security identifiers are interpreted and verified. The app perhaps makes a few additions to the request (appending authenticated headers). Failing authentication returns an HTTP 401. Nginx then takes the request and routes it through an authorization application which determines, based upon identity and the HTTP verb (put, delete, get, etc.) and URL in question, whether the actor/agent/user has permission to performed the intended action. Perhaps the authorization application modifies the request somewhat by appending another header, for example. Failing authorization returns 403. (Wash, rinse, repeat the proxy pattern for any number of services that want to participate in the request in some fashion.) Finally, Nginx routes the request into the actual application code where the request is inspected and the requested operations are executed according to the URL in question and where the identity of the user can be captured and understood by the application by looking at the altered HTTP request. Ideally, Nginx could do this natively or with a plugin. Any ideas? The alternative that I've considered is having Nginx hand off the initial request to the authentication application and then have this application proxy the request back through to Nginx (whether on the same box or another box). I know there are a number of applications frameworks (Django, RoR, etc.) that can do a lot of this stuff "in process", but I was trying to make things a little more generic and self contained where different applications could "hook" the HTTP pipeline of Nginx and then participate in, short circuit, and even modify the request accordingly. If Nginx can't do this, is anyone aware of other web servers that will perform in the manner described above?

  Read the article

• Proper Network Infastructure Setup DMZ, VPN, Routing Hardware Question

  - by NickToyota

  Greetings Server Fault Universe, So here's a quick background. Two weeks ago I started a new position as the systems administrator for an expanding health services company of just over 100 persons. The individual I was replacing left the company with little to no notice. Basically, I have inherited a network of one main HQ (where I am situated) which has existed for over 10 years, with five smaller offices (less than 20 persons). I am trying to make sense of the current setup. The network at the HQ includes: Linksys RV082 Router providing internet access for employees and site to site VPN connecting the smaller offices (using an RV042 each). We have both cable and dsl lines connected to balance traffic (however this does not work at all and is not my main concern right now). Cisco Ironport appliance. This is the main gateway for our incoming and outgoing emails. This also has an external IP and internal IP. Lotus domino in and out email servers connected to the mentioned Cisco gateway. These also have an external IP and internal IP. Two windows 2003 and 2008 boxes running as domain controllers with DNS of course. These also have both an external IP and internal IP. Website and web mail servers also on both external and internal IPs. I am still confused as why there are so many servers connected directly to the internet. I am seriously looking to redesign this setup with proper security practices in mind (my highest concern) and am in need of a proper firewall setup for the external/internal servers along with a VPN solution about 50 employees. Budget is not a concern as I have been given some flexibility to purchase necessary solutions. I have been told Cisco ASA appliance may help. Does anyone out in the Server Fault Universe have some recommendations? Thank you all in advance.

  Read the article

• Deploying workstations - best practices?

  - by V. Romanov

  Hi guys I've been researching on the subject of workstation deployment for a while, and found a ton of info and dozens different methods and tools, but no "best practice" method that doesn't lack at least one feature that i consider required for the solution to be perfect. I'm currently interested in windows workstation deployment, but if the tools can be extended to Linux, then it's an added value. I want the deployment tools I use to be able to do the following: hardware independent - I want my image or installation to have a minimum of hardware and driver dependency, so that i can use a single image/package for all workstations easily updatable - I want to be able to update my image as easily as possible without redeploying/rebuilding/reimaging all configurations PXE bootable deployment - I want the tools to be bootable off the network so that I don't need a boot cd/DOK. scriptable for minimum human input - Ideally, the tool should run automatically after being booted and perform a "default" deployment (including partitioning) unless prompted otherwise. i.e - take a pc, hook it up, power on, PXE boot and forget about it until the OS is deployed. I found no single product or environment that does all this. Closest i came to is the windows deployment services/WIM image format. I also checked out numerous imaging and deployment tools including clonezilla, ghost, g4u, wpkg and others, but most of them lack the hardware Independence and updatability features. We currently have a Symantec Ghost server setup that does imaging over the network, but I'm not satisfied with it as it has all the drawbacks i listed above. Do you have suggestions how to optimize the process of workstation deployment? How do you deploy them in your organization? Thanks! Vadim.

  Read the article

• Windows Server 2003 DC hangs after network drivers update

  - by tcv

  Earlier today, we attempted to update the Broadcom BCM5716C network drivers on a Windows Server 2003. (Dell PowerEdge T310, FWIW). Since then we have not been able to boot the server in any normal mode. Safe Mode works. Safe Mode with Networking and regular bootups hang at "Applying Network Settings." I haven't tried Last Known Good Configuration nor have I tried Directory Services Restore Mode. I should also mention that the longest I've allowed "Applying Network Settings" was perhaps 30 minutes. I spoke to Dell since the server is under a basic warranty. They sent me the original Broadcom drivers. The trouble seems to be, however, that since I can only boot in Safe Mode, I can't install the application package as given. In safe mode, I receive the error: "The system administrator has set policies to prohibit this installation." I can install the drivers independently, but that doesn't allow the NICs to work. The most I've been able to get are Code 10 errors on each NIC. I plan to get back to the site tomorrow to attempt installation of a different NIC. I'm wondering what else I can try.

  Read the article

• Why is Xampp unable to start Apache?

  - by jribeiro

  I formatted my computer a week ago. Installed wampp on Windows XP, git and everything I needed. When I run git for the first time it told me it had a problem with my user folder (because of the accents) so I created a new user and migrated everything to the new one. After this, wampp wouldn't start anymore. I uninstalled it and installed xampp which is what I'm using now. My problem is that even though I requesed xampp to install Apache as a service it isn't installed. It doesn't show in Windows' services screen. Xampp control panel shows mysql service running OK. When I click to install Apache as a service it returns no error. When I click Start Apache no error is outputed. No file and no errors under c:/xampp/apache/log/ If I restart my computer it says that Apache service is not installed. I tried to reinstall wampp and the same problem occurs. If I run netstat -a -no nothing is running on port 80! What can I do?

  Read the article

• Menu command stuck on screen

  - by 280Z28

  For some reason, periodically when I select a menu command, the command label gets "stuck" on the screen and won't go away. I can close all open applications, including whichever one I was using when it got stuck, but it still won't go away. In the screenshot below, I opened an new instance of IE just to show how the label stays on top. The label was not created by this instance of IE. Edit with the source: The label that gets stuck is the first menu command I select in IE. If a label is already stuck, a new one does not get stuck (regardless of which instance(s) of IE are involved). Based on this knowledge, I now just open IE on my secondary monitor, carefully open the context menu so the Properties command is in the bottom corner, and click it. This is not a solution... The label never moves and is transparent to mouse input (if I click it, it's as if I clicked the item behind it). The label does not go away if I close all running applications. I haven't tried stopping services or closing system tray items like Live Mesh. The label does go away if I change the screen resolution and then change it back. Any ideas how I can stop this from happening? It's happened a half dozen times since yesterday and it's becoming quite disrupting to my work. Obviously I added the circle in MS Paint. That part isn't stuck. ;)

  Read the article

• What is the correct mail set up for multiple domains on one server?

  - by newmarc

  I have a machine (centos 5) with one external ip address. On that machine I have many virtual hosts with a few different top level domain names and sub-domains under those eg. sub1.domain1.com sub2.domain1.com sub3.domain1.com sub1.domain2.com sub2.domain2.com sub1.domain3.com And so on... Alot of these different sites need to send mail as their corresponding domain (or second-level domain at least). I need to set up DKIM, SPF (but that's handled on the DNS) and rDNS lookup so the mail gets received. As I understand it, you can only have one rDNS entry per machine. I could set up a server for each top level domain, but I'm thinking that'll get expensive. What should I do here? Is there a way to have multiple rDNS lookups on one ip address? How do I setup DKIM signing for multiple domain names on the one machine? Are there any services out there that could handle this for me? Thanks for your help...

  Read the article

• openvpn& iptables -- portforwarding and gateway

  - by Smith.Lai

  The problem is similar to this scenario: iptables rule still take effect after deleted Scenario: There are several clients(C1~C10) providing some services, such as SSH,HTTP..... The clients are actually a personal computer behind NAT. Their IP might be 192.168.0.x For easily access these machines through internet, I built a OpenVPN server(S1). All the C1~C10 connect to S1 with VPN address 10.8.0.x If A user(U1) wanna access C1 SSH through internet, he can connect to S1 with port "55555", and S1 port forward 55555 to 10.8.0.6:22 echo 1 /proc/sys/net/ipv4/ip_forward iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 55555 -j DNAT --to-destination 10.8.0.6:22 It works well until I mark the following in the openvpn server.conf: I marked this because I think this will make all connection go through S1 ;push "redirect-gateway" |-------(NAT)--------| (C1)--| (INTERNET)----(U1) |-----(VPN)----(S1)--| The C1~C10 have their own path to access internet resource through NAT . The server loading would be heavy if all C1~C10 connection go through S1 (for example, C1 is sending data to C2, or C1 is downloading data from a FTP site). Is there a way to solve this quandary?

  Read the article

• How do I find funny pictures?

  - by Hanno Fietz

  No, not lolcats. And I'm not really looking for a specific site, either. I have often wished that I had some funny picture to illustrate a presentation, a website, a post, an email, or something else. Google image search and stock photo services have hardly ever helped me, although that may be because I'm doing something wrong. Jeff Atwood seems to have no problem to find funny pictures for his codinghorror and stackoverflow blogs, as well as for the error messages on the trilogy sites. One of my favourites was this elephant. Other bloggers also seem to be quite good at it. I'm wondering if I simply lack the creativity or if there's sources or methods I don't know about. I could think of the following ways to get pictures, but I'm not sure whether this is really "how they do it". keep a collection of pictures that you stumbled upon and liked (takes quite some time to build up to a proper library), when you need a picture, there's one in there maybe have pictures on paper, too, like from magazines or ads. when you are looking for a picture, search online (Flickr, Google, stock photos). This has never really worked for me, I don't know why. produce the pictures yourself, i. e. have a good library of source material or find some online and apply some creativity and suitable software. I could imagine that this could work well once you have the practice.

  Read the article

• nconf deployment.ini configuration for a basic Nagios server on CentOS 6.2

  - by jshin47

  I have set up nconf and Nagios but I cannot figure out how to configure deployment.ini to properly deploy the generated configuration to /usr/local/nagios/etc. Here are the directory listings of interest: [jshin@nag0 tmp]$ ls Default_collector global [jshin@nag0 tmp]$ cd Default_collector/ [jshin@nag0 Default_collector]$ ls advanced_services.cfg hostgroups.cfg service_dependencies.cfg services.cfg host_dependencies.cfg hosts.cfg servicegroups.cfg [jshin@nag0 Default_collector]$ cd .. [jshin@nag0 tmp]$ cd global/ [jshin@nag0 global]$ ls checkcommands.cfg contacts.cfg misccommands.cfg timeperiods.cfg contactgroups.cfg host_templates.cfg service_templates.cfg [jshin@nag0 global]$ cd .. [jshin@nag0 tmp]$ cd /usr/local/nagios/etc/ [jshin@nag0 etc]$ ls cgi.cfg htpasswd.users nagios.cfg objects resource.cfg [jshin@nag0 etc]$ cd objects/ [jshin@nag0 objects]$ ls commands.cfg localhost.cfg switch.cfg timeperiods.cfg contacts.cfg printer.cfg templates.cfg windows.cfg Here is my deployment.ini (pretty much the default setting) ;; LOCAL deployment ;; [extract config] type = local source_file = "/var/www/html/nconf/output/NagiosConfig.tgz" target_file = "/tmp/" action = extract [copy collector config] type = local source_file = "/tmp/Default_collector/" target_file = "/usr/local/nagios/etc/Default_collector/" action = copy [copy global config] type = local source_file = "/tmp/global/" target_file = "/usr/local/nagios/etc/global" action = copy reload_command = "service nagios restart" What I am wondering is why the directory structure that the default deployment.ini seems to suggest, with Default_collector and global, is different from the one that Nagios has by default, with only a folder called objects. What am I missing? Or more importantly, how does your deployment.ini look?

  Read the article

• Setup a new domain controller over a temporary VPN, but now Windows delays startup?

  - by Kris Anderson

  I'm migrating servers from colo locations to Amazon's VPC EC2 instances. If anyone hasn't worked with Amazon VPC before, VPN is a pain in the arse! Anyways, I setup a new server that acts as the domain controller for our Amazon VPC. In order to migrate all the user accounts from our existing domain controllers I manually connected to our colo VPN using my user account on the new Amazon EC2 machine. I was able to join the domain and the new Amazon server became another domain controller on our network. So far so good. The problem I'm having is that when booting the EC2 domain controller (which is no longer connected to the VPN so it can't communicate with the existing controllers), it takes a good 6-8 minuted before I can remote into the server (instead of the 1-2 minutes it should take). Also, during this time most of the services we also run (like IIS) also give 404 errors until the 6-8 minutes have passed. It's almost like the domain controller is attempting to reach the other domain controllers first and after 6-8 minutes it falls back to the one located on the local machine? I don't think that's what's happening though, because Server 2008 R2 doesn't have primary and backup domain controllers. They're all equal as far as Windows is concerned. For my network adapter I have only one DNS listed, 127.0.0.1, so it should be looking up the local domain controller and not the other domain controllers it connected to over VPN when VPN was enabled. In the server logs I'm seeing these warnings pop up during a reboot: The winlogon notification subscriber is taking long time to handle the notification event (CreateSession). The winlogon notification subscriber took 409 second(s) to handle the notification event (CreateSession). Any ideas on what's happening here? I would try removing the existing domain controllers from the new Amazon EC2 machine, but I still need to connect over VPN a few times to migrate some data between the servers, and I don't want that change being reflected back to the other domain controllers in our colo locations.

  Read the article

• IIS7 binding to subdomain causing authentication errors (TFS 2010)

  - by Tommy Jakobsen

  I'm trying to bind a IIS web site (Team Foundation Services 2010) to a subdomain, which is causing authentication errors. First I'll explain what I've done to set it up. This is the fist time I do this, so please correct me if I'm wrong. The web server is a stand-alone Windows Server 2008 R2 x64, running IIS7 with .NET Framework 4. I have the following A-records, pointing to my server: server.mydomain.com *.server.mydomain.com So all subdomains of server.mydomain.com points to the server. In IIS7 I have a web site (TFS 2010) on port 8080, with a virtual directory (named tfs) that is using Windows Authentication. I have one binding on the web site pointing to all unassigned IP addresses, port 8080 and having a host name of tfs.server.mydomain.com. Now, shouldn't I be able to access the virtual directory through: http://tfs.server.mydomain.com/tfs That is not working. However, I can access it through: http://tfs.server.mydomain.com:8080/tfs But, it won't let me authenticate using a Windows account (Server\Username). A windows account that I can authenticate with, when accessing the site through http://localhost:8080/tfs. What am I missing here?

  Read the article

• How to set up a serial connection to a Windows 7 computer

  - by oli_arborum

  I need to set up a "dial in" connection to a Windows 7 (Ultimate) computer via a serial null-modem cable to be able to connect from a Windows XP client to that computer and exchange data over IP. Question 1: How do I do that? I did neither find the information via Google nor in the MSDN. Seems like no one tried ever before... ;-) I already managed to install a legacy modem device called "Communications cable between two computers" and found the menu entry "New Incoming Connection..." in Network and Internet Network Connections. When I finish this wizard I get the message that the "Routing and Remote Access service" cannot be started. In the event viewer I see the following error messages: "The currently configured authentication provider failed to load and initialize successfully. The requested name is valid, but no data of the requested type was found." (Source: RemoteAccess, EventID: 20152) "The Routing and Remote Access service terminated with service-specific error The requested name is valid, but no data of the requested type was found." (Source: Service Control Manager, EventID: 7024) The Windows 7 installation is "naked", i.e. no additional software or services are installed. Question 2: Am I on the right path to set up the connection? Question 3: How can I get the Routing and Remote Access service running?

  Read the article

< Previous Page | 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055  | Next Page >