Search Results

Search found 35738 results on 1430 pages for '01 java'.

Page 1050/1430 | < Previous Page | 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057  | Next Page >

  • Ubuntu 11.10, FF 11, ATI Catalyst v12.2, Driver Package version 8.95, WebGL doesn't work

    - by Victor S
    I'm running Ubuntu 11.10, FF 11, ATI Catalyst v12.2, Driver Package version 8.95, WebGL doesn't work. This is a pretty capable setup and definetly did have FF work previously, Note: I've downloaded and installed the ATI drivers from AMD. Not sure how to get WebGL working. Updated My video card info: 01:00.0 VGA compatible controller: ATI Technologies Inc Cypress [Radeon HD 5800 Series] (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc Device 0b00 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fbee0000 (64-bit, non-prefetchable) [size=128K] I/O ports at d000 [size=256] Expansion ROM at fbec0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [150] Advanced Error Reporting Kernel driver in use: fglrx_pci Kernel modules: fglrx, radeon

    Read the article

  • Wi-fi interface fails to authenticate on secured networks

    - by Eduardo Bezerra
    the problem is that I can't connect to wireless networks that have security enabled. I can connect fine to the unsecured network of my university, but not to the secured one in the same building. Also, it fails to connect to my home wireless router, which uses wpa2 encryption. Any ideas? I have a Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01), with pci id [14e4:4353], running Ubuntu 12.10 on a macbook pro 6,2. I'm using bcmwl-kernel-source package with kernel module wl to enable my wi-fi device.

    Read the article

  • Ubuntu 12.10 64bit fresh install, wireless issue!

    - by Dave
    Just installed a fresh Ubuntu 12.10 64bit on my laptop, run the update manager, restarted and suddenly I can't use my wifi anymore. Ubuntu software center installed automatically the wifi additional driver as you can see in my screenshot. If I mark the option "Do not use the device" and apply changes, restarting Ubuntu my wifi is back and I can use it. If I run iwconfig my terminal is showing this Now if I use Ubuntu for more than 20 minutes surfing the web my wifi it keeps to be connected but I don't receive any signal from it. Any page I try to open it simply don't open (just waiting icon). If I disconnect my wifi and connect it again, same issue, it doesn't work. The only way to make it work again is to restart Ubuntu. And the same story it happens again after aprox. 20, 30 minutes. WIFI device details: 03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Thanks, Dave

    Read the article

  • Best of OTN - Week of May 25th

    - by CassandraClark-OTN
    Architect Community Podcast: Going Mobile - Developing Enterprise Mobile Apps This four-part OTN ArchBeat Podcast series is devoted to a discussion about bringing mobility to the enterprise, and how architects and developers can take advantage of the opportunities in the evolution of mobile application development. Video: Data Modeling and Moving Meditation with Kent Graziano Want to learn more about Kent's Kscope 2014 data modeling sessions and how Chi Gung can help you get a great start on your day? Check out this video interview. Video: Oracle ACE Director Stewart Bryson on OBIEE, ODI, GoldenGate In this interview Stewart talks about how OBIEE, ODI, GoldenGate and other technologies fit into his Kscope 2014 sessions, and about the sessions he plans to attend. Friday Funny from OTN Architect Community Manager Bob Rhubart:Even if you're not a person of a certain age, you need read A journey into my colon -- and yours, humorist Dave Barry's wildly funny 2008 account of his colonoscopy. Because one day you will be a person of certain age... Get involved in community conversations on the following OTN channels... OTN TechBlog The Java Source Blog The OTN Garage Blog The OTN ArchBeat Blog @oracleotn @java @OTN_Garage @OTNArchBeat @OracleDBDev OTN I Love Java OTN Garage OTN ArchBeat Oracle DB Dev OTN Java OTN ArchBeat

    Read the article

  • How can I solve display glitches and poor performance with ATI fglrx driver on my ThinkPad X100e?

    - by rewbs
    I noticed that video performance on my Thinkpad X100e was very poor compared to Windows 7, so I installed the ATI fglrx proprietary drivers by using the "Additional Drivers" dialogue box. The system has an ATI Radeon Mobility HD 3200 chip. The result of installing the drivers is pretty devastatingly negative, with symptoms such as skewed content in windows, browser tabs and text boxes failing to refresh when their content changes. In fact, please excuse typos in this post, because I can't really see what I am typing. :) I also notice that HD video playback performance is no better - perhaps even worse - than prior to installing the drivers. Example of what I see: Here's the output of fglrxinfo: display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 3200 Graphics OpenGL version string: 3.3.10237 Compatibility Profile Context Output of lspci | grep -i vga: 01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] I'm on Ubuntu 10.10 with kernel 2.6.35-22-generic-pae. What can I try? Many thanks, -R

    Read the article

  • Meet up with the JCP at JavaOne Latin America

    - by Heather VanCura
    The JCP made it to JavaOne Brazil!  We had a quickie presentation earlier today on JCP.Next that was well attended.  Come to see us at@ the  OTN mini-theatre tomorrow from 12:00-12:15 pm for a quickie on participation.  Then make your way to the Mazanino Sala 12 at 12:30 pm for CON-22250.  "The Java Community Process: How You Can Make a Positive Difference" will be presented with Heather VanCura, JCP,  and Fabio Velloso, SouJava, on Thursday, 6 December, at 12:30 pm.  Find out more about how to participate in the JCP program, the JCP.Next effort and how to get involved with Adopt-a-JSR through your JUG (or on your own)!  Here is the description in Portuguese: A JCP desempenha um papel fundamental na evolução do Java. A sessão vai enfatizar o valor da transparência e participação através da JCP, Grupos de Usuários Java e do programa Adote um JSR. Vamos explorar também algumas das mudanças futuras no processo através da iniciativa JCP.Next, e explicar como você pode se envolver. Traga suas dúvidas, suas sugestões, e suas preocupações. Nós queremos ouvir de você, e incentivá-lo e facilitar a sua participação ativa no avanço da plataforma Java

    Read the article

  • Fair 2-combinations

    - by Tometzky
    I need to fairly assign 2 experts from x experts (x is rather small - less than 50) for every n applications, so that: each expert has the same number of applications (+-1); each pair of experts (2-combination of x) has the same number of applications (+-1); It is simple to generate all 2-combinations: for (i=0; i<n; i++) { for (j=i+1; j<n; j++) { combinations.append(tuple(i,j)); } } But to assign experts fairly I need to assign a combination to an application i correct order, for example: experts: 0 1 2 3 4 fair combinations: counts 01234 01 11000 23 11110 04 21111 12 22211 34 22222 02 32322 13 33332 14 34333 03 44343 24 44444 I'm unable to come up with a good algorithm for this (the best I came up with is rather complicated and with O(x4) complexity). Could you help me?

    Read the article

  • Intel Centrino Wireless-N 1000 Again ! Ubuntu 13.04 x64

    - by vafa
    First I have to say that I tried everything written about this concept. The problem is that it stops working randomly in 3 main forms : 1 - sometimes it disconnect from wireless network and reconnect automatically 2 - sometimes it disconnect and wont connect no matter what (needs reboot) 3 - some times it's still connected but cannot ping or surf or whatever. I already tried disabling N mod using these commands : sudo modprobe -r iwlwifi modprobe iwlwifi 11n_disable=1 (or 0, whatever) it didn't help . these are the results of lspci, sudo lshw -C network, ifconfig, iwconfig, rfkill list when it disconnected and didn't connect till reboot : ifconfig : eth0 Link encap:Ethernet HWaddr c8:0a:a9:34:65:77 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1563213476557380 errors:9379306629148050 dropped:3126435543049350 overruns:1563217771524675 frame:7816088857623375 TX packets:1563217771524675 errors:6252871086098700 dropped:0 overruns:1563217771524675 carrier:3126435543049350 collisions:7816088857623375 txqueuelen:1000 RX bytes:1563217771524675 (1.5 PB) TX bytes:1563217771524675 (1.5 PB) ham0 Link encap:Ethernet HWaddr 7a:79:19:a5:e4:93 inet addr:25.165.228.147 Bcast:25.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::7879:19ff:fea5:e493/64 Scope:Link inet6 addr: 2620:9b::19a5:e493/96 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1404 Metric:1 RX packets:7743 errors:0 dropped:0 overruns:0 frame:0 TX packets:1250 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:665642 (665.6 KB) TX bytes:204056 (204.0 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:41138 errors:0 dropped:0 overruns:0 frame:0 TX packets:41138 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6420962 (6.4 MB) TX bytes:6420962 (6.4 MB) wlan0 Link encap:Ethernet HWaddr 00:1e:64:45:fb:70 inet6 addr: fe80::21e:64ff:fe45:fb70/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:286999 errors:0 dropped:0 overruns:0 frame:0 TX packets:226966 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:324386887 (324.3 MB) TX bytes:30674804 (30.6 MB) iwconfig : ham0 no wireless extensions. eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=14 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off sudo lshw -C network: *-network description: Wireless interface product: Centrino Wireless-N 1000 [Condor Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:07:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:45:fb:70 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.8.0-30-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:46 memory:c0400000-c0401fff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: c0 serial: c8:0a:a9:34:65:77 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:47 memory:c0900000-c093ffff ioport:5000(size=128) *-network description: Ethernet interface physical id: 2 logical name: ham0 serial: 7a:79:19:a5:e4:93 size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full ip=25.165.228.147 link=yes multicast=yes port=twisted pair speed=10Mbit/s lspci: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: NVIDIA Corporation G98M [GeForce G 105M] (rev a1) 07:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak] 09:00.0 Ethernet controller: Qualcomm Atheros AR8131 Gigabit Ethernet (rev c0) rfkill list : 1: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 2: acer-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 9: phy0: Wireless LAN Soft blocked: no Hard blocked: no any help will be REALLLYYYY appreciated

    Read the article

  • Asus X552VL WI-FI Problem

    - by Mitkobg
    I have a problem with my Wireless on my laptop. When i did rfkill list: 1: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: asus-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 4: hci0: Bluetooth Soft blocked: no Hard blocked: no 5: phy1: Wireless LAN Soft blocked: no Hard blocked: yes itko@Mitko:~$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off mitko@Mitko:~$ lspci -nnk | grep -A2 0280 03:00.0 Network controller [0280]: Qualcomm Atheros AR9485 Wireless Network Adapter [168c:0032] (rev 01) Subsystem: AzureWave Device [1a3b:2c97] Kernel driver in use: ath9k mitko@Mitko:~$ lsmod | grep -e ath9k -e asus asus_nb_wmi 16990 0 asus_wmi 24191 1 asus_nb_wmi sparse_keymap 13948 1 asus_wmi ath9k 164164 0 ath9k_common 13551 1 ath9k ath9k_hw 453856 2 ath9k_common,ath9k ath 28698 3 ath9k_common,ath9k,ath9k_hw mac80211 626557 1 ath9k cfg80211 484040 4 wl,ath,ath9k,mac80211 wmi 19177 3 mxm_wmi,nouveau,asus_wmi video 19476 3 i915,nouveau,asus_wmi

    Read the article

  • Broadcom wireless card disappeards on restart

    - by Kristian Jones
    I used 'additional drivers' to install 'Broadcom STA wireless driver' and it returns an error. WIthin jockey.log it says the following numerous times. 2011-02-14 21:24:06,945 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted After it returns the error the network card will work temporarily until I restart the laptop. When I restart I got to go through the procedure again of trying to activate the driver, returns an error however it works temporarily. The network card is as follows on a Dell Inspiron 1545: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] Rev 01 I have been trying to solve this myself for many hours. Any help is appreciated/

    Read the article

  • Ubuntu cant load sound cart

    - by Reza Marefaty
    I have installed Ubuntu 12 and i cant see any volume controller on it and so no audio player can detect any sound card and nothing shown in system setting - sound - output tab. but i can see my hard ware by typing this command : aplay -l Return : List of PLAYBACK Hardware Devices ** card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: U0x4d90x20 [USB Device 0x4d9:0x20], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 How can i activate sound ? Edit : This info may helep for the solution : sudo lspci | grep Audio 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 04:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series]

    Read the article

  • sound stopped working after upgrade to 11.10 on Tuesday 20th March

    - by Hugh Barney
    My sound card stopped working after a set of updates were installed 2 days ago. The sound card is detected, the volume is not muted and the speakers work, I can make the speakers hum if I touch the jack plug lead that normally plugs into the card. hugh@lindisfarne:~$ lspci -v | grep -A7 -i "audio" 07:01.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster Subsystem: Creative Labs SB0570 [SB Audigy SE] Flags: bus master, medium devsel, latency 32, IRQ 16 I/O ports at c000 [size=32] Capabilities: Kernel driver in use: CA0106 Kernel modules: snd-ca0106 I've tried reverting those upgraded packages that look like the could impact the kernal - but to no avail. alsamixer does not have anything muted, I've been though all the sound card debug/troubleshooting pages I can find. Kernal driver is attached. So whats gone pop ? I will boot from CD to check - but I am pretty sure this is a sw and not a hw problem.

    Read the article

  • Loud and annoying noise on login

    - by searchfgold6789
    I have a PC with Kubuntu 13.10 64-bit on it. The problem is that whenever I log in (automatic log in is enabled), there is a loud double-click noise that sounds from the speakers whether the volume is muted or not. I have two sound cards; the motherboard audio, which is disabled in the BIOS, and the Creative! Labs Sound Blaster X-Fi SB0460, which I have normal speakers plugged into. Does anyone know how to fix this? Relative lspci lines: 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series] 02:05.0 Multimedia audio controller: Creative Labs SB X-Fi Using default Phonon backend. (I am not really sure what other information to provide, but will gladly edit in anything upon request.)

    Read the article

  • Dell wireless not working after upgrade

    - by Omer Saeed
    So, the short version of my sad story is that I tried upgrade Ubuntu to 12.04 and wireless driver has stopped working. I have tried all the solutions but nothing seem to be working. When I try to install my wireless from "Additional Drivers" Its says: Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log The lspci command gives me the following info about wireless: 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) I have tried removing bcm drivers and reinstalling, but nothing seems to be working. rfkill is good too.

    Read the article

  • Oracle Developer Day, Romania, 2012

    - by Geertjan
    I'm on the way back from a great experience in Cluj, Romania: the Oracle Developer Day that was held here today. After the Oracle Developer Day in Warsaw, two days ago, I flew to Bucharest and then had to wait about 6 hours for the flight to Cluj. So I spent several of those hours in a taxi, with a very nice driver who showed me all over the place in Bucharest, such as the Palace of Parliament (according to Wikipedia, "the world's largest civilian building, most expensive administrative building, and heaviest building"): He also taught me a lot of Romanian. (My current phonetic-based vocabulary can be admired and/or ridiculed here.) Meeting Emilian Bold (third on the right below) from the NetBeans Dream Team was a definite highlight: The above shows the three speakers on the Java Track "preparing" for their sessions; me, Lukas Jungmann, and Emilian Bold. In Oracle's Gregor Rayman's keynote, this particular slide responded well to my NetBeans heart: The "Java Track" had sessions on Java EE 6, the NetBeans Platform, and Java Web Services, as well as "What's New in NetBeans IDE 7.1", where Emilian, shown in action below, outlined the NetBeans community, e.g., the NetBeans Dream Team and the NetBeans governance board. (But it was all in Romanian so I'm not really sure what was said exactly!) Finally, there was time to recover from the whole day, right before my trip back to Bucharest: All in all a great day! Looking forward to remaining in touch with the many people I met today.

    Read the article

  • Get Started with JavaFX 2 and Scene Builder

    - by Janice J. Heiss
    Up on otn/java is a very useful article by Oracle Java/Middleware/Core Tech Engineer Mark Heckler, titled, “How to Get Started (FAST!) with JavaFX 2 and Scene Builder.”  Heckler, who has development experience in numerous environments, shows developers how to develop a JavaFX application using Scene Builder “in less time than it takes to drink a cup of coffee, while learning your way around in the process”. He begins with a warning and a reassurance: “JavaFX is a new paradigm and can seem a bit imposing when you first take a look at it. But remember, JavaFX is easy and fun. Let's give it a try.” Next, after showing readers how to download and install JDK/JavaFX and Scene Builder, he informs the reader that they will “create a simple JavaFX application, create and modify a window using Scene Builder, and successfully test it in under 15 minutes.” Then readers download some NetBeans files:“EasyJavaFX.java contains the main application class. We won't do anything with this class for our example, as its primary purpose in life is to load the window definition code contained in the FXML file and then show the main stage/scene. You'll keep the JavaFX terms straight with ease if you relate them to the theater: a platform holds a stage, which contains scenes. SampleController.java is our controller class that provides the ‘brains’ behind the graphical interface. If you open the SampleController, you'll see that it includes a property and a method tagged with @FXML. This tag enables the integration of the visual controls and elements you define using Scene Builder, which are stored in an FXML (FX Markup Language) file. Sample.fxml is the definition file for our sample window. You can right-click and Edit the filename in the tree to view the underlying FXML -- and you may need to do that if you change filenames or properties by hand - or you can double-click on it to open it (visually) in Scene Builder.” Then Scene Builder enters the picture and the task is soon done. Check out the article here.

    Read the article

  • How to remove tearing in videos with Nvidia driver?

    - by Daimon
    I'm using ubuntu 11.10 as my HTPC OS on ION board. Tearing was always a big problem but this guide (http://www.omgubuntu.co.uk/2010/01/how-to-fix-video-tearing-in-videos-nvidia-ubuntu/) used to solve it in previous versions. I mean it used to because it doesn't solve it anymore. I tried making same changes (although compiz config is little different and same options are in different panels) but with no success. I also tried to manually set resolution and refresh rate of HDTV in nvidia settings - no changes at all. I know that open source drivers would solve a problem but it's not an option because I need VDPAU acceleration. I've also read that completely disabling of Composite solves the problem - can't do that because compizconfig-settings-manager crashes on attempt. More info about setup: Ubuntu 11.10 64bit Nvidia ION board newest official version of proprietary driver SMplayer with vdpau settings Full HD HDTV

    Read the article

  • Stuxnet aurait préalablement été testé par les militaires d'Israël, plus de deux ans avant son lancement sur l'Iran

    Stuxnet aurait préalablement été testé par les militaires d'Israël, plus de deux ans avant son lancement sur l'Iran Mise à jour du 17.01.2011 par Katleen De nouvelles informations viennent de tomber concernant Stuxnet, la bête noire de l'Iran. Le ver aurait ainsi été testé en secret dans une base militaire Israélienne (le complexe Dimona dans le désert de Negev) avant d'être lâché sur les infrastructure nucléaires iraniennes. Deux ans avant leur mise en oeuvre, les attaques auraient été simulées sur les mêmes machines que celles visées, pour garantir le succès futur de l'opération grandeur nature. En conséquence, des experts auraient examiné les failles des contrôleurs ...

    Read the article

  • Atheros AR2413 wireless not working after shutdown

    - by Chandrasekhar
    I am using a Ubuntu 11.04 on an Acer aspire 3680 laptop and my wifi is not working. I followed the below commands to install the madwifi driver: sudo su apt-get install subversion cd /usr/src svn checkout http://madwifi-project.org/svn/madwifi/trunk madwifi tar cfvz madwifi.tgz cd madwifi make && make install echo "blacklist ath5k" /etc/modprobe.d/blacklist.conf echo "ath_pci" /etc/modules modprobe ath_pci sudo reboot After installation I am facing the same problem. My wifi wont work after I shutdown. Infact it didn't work after suspend but I rectified that problem by the following commands: Command 1: sudo rmmod -f ath_pci sudo rfkill unblock all sudo modprobe ath_pci along with the command SUSPEND_MODULES=ath_pci added to the /etc/pm/config.d/madwifi directory. So if I suspend and then on my laptop the wifi loads well and doesn't create a problem. But if I shutdown my laptop the wifi never loads again and eachtime I have to run a Ubuntu 9.04 live CD to load it. I did try adding the Command 1 to the /etc/rc.local directory but still it doesn't work. So my question is: What should I do in order to make my wireless work without having to run a live CD of ubuntu 9.04 everytime after shutdown? Thanks. Here are the outputs which one might need: Output 1 chandru@chandru-acer:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14) 0a:03.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01) 0a:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 0a:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) Output 2: lsmod Module Size Used by wlan_tkip 17074 2 binfmt_misc 13213 1 parport_pc 32111 0 ppdev 12849 0 snd_hda_codec_si3054 12924 1 snd_hda_codec_realtek 255882 1 joydev 17322 0 snd_atiixp_modem 18624 0 snd_via82xx_modem 18305 0 snd_intel8x0m 18493 0 snd_ac97_codec 105614 3 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m snd_hda_intel 24113 2 ac97_bus 12642 1 snd_ac97_codec snd_hda_codec 90901 3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel i915 451053 3 snd_hwdep 13274 1 snd_hda_codec snd_pcm 80042 7 snd_hda_codec_si3054,snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25269 1 snd_seq_midi drm_kms_helper 40971 1 i915 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event pcmcia 39671 0 snd_timer 28659 2 snd_pcm,snd_seq snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq drm 184164 4 i915,drm_kms_helper yenta_socket 27230 0 tifm_7xx1 12898 0 wlan_scan_sta 21945 1 ath_rate_sample 17279 1 pcmcia_rsrc 18292 1 yenta_socket psmouse 73312 0 tifm_core 15040 1 tifm_7xx1 snd 55295 18 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device serio_raw 12990 0 i2c_algo_bit 13184 1 i915 soundcore 12600 1 snd pcmcia_core 21505 3 pcmcia,yenta_socket,pcmcia_rsrc video 19112 1 i915 ath_pci 183044 0 snd_page_alloc 14073 5 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_hda_intel,snd_pcm wlan 224640 5 wlan_tkip,wlan_scan_sta,ath_rate_sample,ath_pci ath_hal 398701 3 ath_rate_sample,ath_pci lp 13349 0 parport 36746 3 parport_pc,ppdev,lp usbhid 41704 0 hid 77084 1 usbhid sky2 49172 0 Output 3 root@chandru-acer:~# lshw -C network PCI (sysfs) *-network description: Ethernet interface product: 88E8038 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 14 serial: 00:16:36:fb:aa:64 capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.28 firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:43 memory:44000000-44003fff ioport:2000(size=256) *-network description: Wireless interface product: AR2413 802.11bg NIC vendor: Atheros Communications Inc. physical id: 3 bus info: pci@0000:0a:03.0 logical name: wifi0 version: 01 serial: 00:19:7d:d3:0c:fd width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath_pci ip=192.168.1.6 latency=96 maxlatency=28 mingnt=10 multicast=yes wireless=IEEE 802.11g resources: irq:18 memory:d0000000-d000ffff Output 4 root@chandru-acer:~# lsmod | grep ath_pci ath_pci 183044 0 wlan 224640 5 wlan_tkip,wlan_scan_sta,ath_rate_sample,ath_pci ath_hal 398701 3 ath_rate_sample,ath_pci

    Read the article

  • Ubuntu 12.04, can't find my home wifi network

    - by Anton
    I've tried several solutions I found on the web, but didn't manage to solve a problem. Since today my laptop won't find my WiFi network, but neighbours' networks are suggested. Another laptop with U12.04 does find one. What do I do? I've Dell Latitude-E4310, 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) Subsystem: Dell Inspiron M5010 / XPS 8300 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f2c00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: bcma, brcmsmac also NetworkManager Tool State: connected (global) - Device: eth1 ----------------------------------------------------------------- Type: 802.11 WiFi Driver: wl State: disconnected Default: no HW Address: 1C:65:9D:7A:45:5C Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Should I provide anything else? Many thanks in advance.

    Read the article

  • Why has wireless disappeared after my 12.10 upgrade?

    - by Shay Guy
    I just upgraded to 12.10 on my Lenovo B570 laptop. NetworkManager isn't displaying a submenu for wireless connections at all, even though I downloaded the update through the wireless connection. This displeases me. Stuff I've tried includes: $ sudo modprobe wl FATAL: Module wl not found. $ sudo lspci -nn | grep "BCM" 02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) $ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no ETA: linux-headers-generic is already the newest version, and what I get when reinstalling bcmwl-kernel-source includes the following, near the end. DKMS: install completed. ERROR: Module b43 does not exist in /proc/modules ERROR: Module b43legacy does not exist in /proc/modules ERROR: Module ssb does not exist in /proc/modules ERROR: Module bcm43xx does not exist in /proc/modules ERROR: Module brcm80211 does not exist in /proc/modules ERROR: Module brcmfmac does not exist in /proc/modules ERROR: Module brcmsmac does not exist in /proc/modules ERROR: Module bcma does not exist in /proc/modules FATAL: Module wl not found.

    Read the article

  • UNESCO, J-ISIS, and the JavaFX 2.2 WebView

    - by Geertjan
    J-ISIS, which is the newly developed Java version of the UNESCO generalized information storage and retrieval system for bibliographic information, continues to be under heavy development and code refactoring in its open source repository. Read more about J-ISIS and its NetBeans Platform basis here. Soon a new version will be available for testing and it would be cool to see the application in action at that time. Currently, it looks as follows, though note that the menu bar is under development and many menus you see there will be replaced or removed soon: About one aspect of the application, the browser, which you can see above, Jean-Claude Dauphin, its project lead, wrote me the following: The DJ-Native Swing JWebBrowser has been a nice solution for getting a Java Web Browser for most popular platforms. But the Java integration has always produced from time to time some strange behavior (like losing the focus on the other components after clicking on the Browser window, overlapping of windows, etc.), most probably because of mixing heavyweight and lightweight components and also because of our incompetency in solving the issues. Thus, recently we changed for the JavaFX 2.2 WebWiew. The integration with Java is fine and we have got rid of all the DJ-Native Swing problems. However, we have lost some features which were given for free with the native browsers such as downloading resources in different formats and opening them in the right application. This is a pretty cool step forward, i.e., the JavaFX integration. It also confirms for me something I've heard other people saying too: the JavaFX WebView component is a perfect low threshold entry point for Swing developers feeling their way into the world of JavaFX.

    Read the article

  • Jersey 2 Integrated in GlassFish 4

    - by arungupta
    JAX-RS 2.0 has released Early Draft 3 and Jersey 2 (the implementation of JAX-RS 2.0) released Milestone 5. Jakub reported that this milestone is now integrated in GlassFish 4 builds. The first integration has basic functionality working and leaves EJB, CDI, and Validation for the coming months. TOTD #182 explains how to get started with creating a simple Maven-based application, deploying on GlassFish 4, and using the newly introduced Client API to test the REST endpoint. GlassFish 4 contains Jersey 2 as the JAX-RS implementation. If you want to use Jersey 1.1 functionality, then Martin's blog provide more details on that. All JAX-RS 1.x functionality will be supported using standard APIs anyway. This workaround is only required if Jersey 1.x functionality needs to be accessed. Here are some pointers to follow JAX-RS 2 Specification Early Draft 3 Latest status on specification (jax-rs-spec.java.net) Latest JAX-RS 2.0 Javadocs Latest status on Jersey 2 (jersey.java.net) Latest Jersey API Javadocs Latest GlassFish 4.0 Promoted Build Follow @gf_jersey Provide feedback on Jersey 2 to users@jersey.java.net and JAX-RS specification to users@jax-rs-spec.java.net.

    Read the article

  • What is the best HTML specification to be used as of Q1 2011?

    - by Rob McKinnon
    While developing a web application, what is the best spec to use? HTML4.01 HTML5 XHTML trans XHTML1.1 I was taught to use XHTML1.0 strict in uni and to avoid applet/iframe/tables(except in forms). I noticed that some deprecated tags are available in HTML5. Is it safe to code in HTML5? If so should I use target='', and the aforementioned tags? I have noticed that there are many alternatives to choose from including canvas, object. I have no preference, although Iframe tags are being dispensed from sources like Facebook/Google/etc. What would be the best avenue to take for Spec as of now(Feb 2011)?

    Read the article

  • Get Trained in Sun ZFS Storage 7000 Appliance

    - by mseika
    Oracle University has scheduled the following OPN Only course: Course: Sun ZFS Storage 7000 Appliance Installation, Administration & Hands-On Lab Dates: 23-27 Jun 2014 11-15 Aug 2014 6-10 Oct 2014 Location: Reading You will learn how to successfully describe, install, configure, maintain, administer, troubleshoot and upgrade Sun ZFS Storage 7000 software and hardware. There is a hands-on lab which will take you through a NAS head software restore session, often referred to as a FISHSTICK restore. More details and online registration Remember: your OPN discount will be applied to the standard price shown on Oracle University web pages. For assistance in booking and more information, contact the Oracle University Service Desk: eMail: [email protected] Telephone: 01 189 249 066

    Read the article

< Previous Page | 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057  | Next Page >