Search Results

Search found 339 results on 14 pages for 'cold diamondz'.

Page 11/14 | < Previous Page | 7 8 9 10 11 12 13 14  | Next Page >

• Why is my rsync so slow?

  - by iblue

  My Laptop and my workstation are both connected to a Gigabit Switch. Both are running Linux. But when I copy files with rsync, it performs badly. I get about 22 MB/s. Shouldn't I theoretically get about 125 MB/s? What is the limiting factor here? EDIT: I conducted some experiments. Write performance on the laptop The laptop has a xfs filesystem with full disk encryption. It uses aes-cbc-essiv:sha256 cipher mode with 256 bits key length. Disk write performance is 58.8 MB/s. iblue@nerdpol:~$ LANG=C dd if=/dev/zero of=test.img bs=1M count=1024 1073741824 Bytes (1.1 GB) copied, 18.2735 s, 58.8 MB/s Read performance on the workstation The files I copied are on a software RAID-5 over 5 HDDs. On top of the raid is a lvm. The volume itself is encrypted with the same cipher. The workstation has a FX-8150 cpu that has a native AES-NI instruction set which speeds up encryption. Disk read performance is 256 MB/s (cache was cold). iblue@raven:/mnt/bytemachine/imgs$ dd if=backup-1333796266.tar.bz2 of=/dev/null bs=1M 10213172008 bytes (10 GB) copied, 39.8882 s, 256 MB/s Network performance I ran iperf between the two clients. Network performance is 939 Mbit/s iblue@raven $ iperf -c 94.135.XXX ------------------------------------------------------------ Client connecting to 94.135.XXX, TCP port 5001 TCP window size: 23.2 KByte (default) ------------------------------------------------------------ [ 3] local 94.135.XXX port 59385 connected with 94.135.YYY port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.09 GBytes 939 Mbits/sec

  Read the article

• Laptop CPU fan not working properly

  - by Smith

  My laptop's CPU fan is suddenly acting very bizarre, and I am at a loss for what to do so I am asking for some help. Specifically, the fan is not even starting to spin until the CPU reaches 60 degrees Celsius (checked through HWmonitor). Once it is on, however, it properly stays on even when the CPU gets back to idle temps around 38 Celsius. Before, the fan was simply starting with the computer and staying on like normal. I've checked this for consistency both by allowing cold boots to ramp up temperature to 60 Celsius (the slow climb also causing the laptop to become unreasonably warm near the heatsink), and also running Prime95 immediately to kickstart the fan (this works every time). The fan seems to be stationary when turning the computer on from either sleep or shutdown. The fan will start at POST very briefly, and then stop completely. I've checked the BIOS for a SmartFan setting but haven't found any. I've opened the case to check for dust or debris and have not found anything (I applied some canned air to the area just in case). The laptop is a Lenovo ThinkPad Edge E430 and the CPU is an Intel Core i5 3210m @ 2.5 GHz. Any advice would really be appreciated.

  Read the article

• Print job leaves queue but document isn't printed

  - by midnightstar

  I'm dealing with an HP Deskjet F380 All-in-One printer. It's connected via USB to a desktop running Windows 7 Enterprise x64. If I attempt to print something like a web page or a word document, the print job will show up in the print queue and the printer would stir. By stir, I mean, it would seem to prepare itself to print. However, the print job would then leave queue (I'm thinking the computer sees it as completed) and the printer would never actually print anything. However I went into Printers and Devices under the Windows start menu, into printer properties, and print a test page, the test page would print out successfully. I attempted to uninstall and re-install the printer drivers for the printer, but the printer would continue the same behavior afterwards. I also connected the printer to another computer and the printer will print just about anything. I also checked to make sure that the computer the printer needs to be connected to was update to date as far as the OS. The machine is fully up to date. I played with the way the computer handles printer spooling. Under the printer properties, under the "Advanced" tab, I had the print job print directly to the printer. In all these instances, the same behavior continues. I've restarted the printer spooling service. I've also gone under C:\Windows\System32\spool\PRINTERS and deleted files that were sitting in the folder. I have ran SFC /scannnow and the system found no errors in the system's integrity. I had the computer and printer make a cold reboot individually. The only lead I really have going for me is that since the printer prints on other PCs, I can only assume that there is something wrong with the way the PC is configured.

  Read the article

• XNA Notes 008

  - by George Clingerman

  This week has been a rough one. I’ve been sick and then in some kind of slump for my afternoon coding sessions. It could be from the cold, could be I’m still tired from writing that Windows Phone 7 game development book (which is out now!) or it could just be I’m tired of winter and want some sunshine. All I know is that even while I’m stick, the XNA world keeps going along at it’s whirlwind pace. Below are the things I caught in between my coughing fits.. Time Critical XNA News: The 2011 MVP summit is almost here so pass along your feelings and thoughts so the MVPs can take them and share them with the team in person http://forums.create.msdn.com/forums/p/76317/464136.aspx#464136 Dream Build Play - there’s no new announcement yet, but you can’t get much more to the end of February than this! http://www.dreambuildplay.com/Main/Home.aspx XNA Team: Dean Johnson from the XNA team shares an excellent way of handling Guide.IsTrialMode on WP7 http://blogs.msdn.com/b/dejohn/archive/2011/02/21/calling-guide-istrialmode-on-windows-phone-7.aspx Nick Gravelyn tries a new tactic in deciding if there’s enough interest to develop a sequel or not. Don’t YOU want Pixel Man 2 to come out? http://nickgravelyn.com/pixelman2/ XNA MVPs: Andy “The ZMan” Dunn finally shares what he’s been secretly working on these past 4 months http://twitter.com/#!/The_Zman/status/40590269392887808 http://www.youtube.com/watch?v=Rg8Z0ZdYbvg&feature=youtu.be Joel Martinez lets developers around NYC know they should by signing up for Game Hack Day http://twitter.com/joelmartinez/statuses/41118590862102528 http://gamehackday.org/71fdk XNA Developers: Michael McLaughlin shares an XNA RenderTarget2D Sample http://geekswithblogs.net/mikebmcl/archive/2011/02/18/xna-rendertarget2d-sample.aspx Martin Caine starts a new series on Deferred Rendering in XNA 4.0 http://twitter.com/#!/MartinCaine/status/39735221339291648 http://martincaine.com/xna/deferred_rendering_in_xna_4_introduction ElemenyCy posts about his fun time with the IntermediateSerializer http://www.ubergamermonkey.com/xna/holy-bloated-xml-batman/ Ben Kane releases a narrated dev diary video for Project Splice. Let him know if you’d like to see more! (I know I do!) http://twitter.com/#!/benkane/status/39846959498002432 http://www.youtube.com/watch?v=1EmziXZUo08&feature=youtu.be Jason Swearingen (of Novaleaf) posts his part 1 of Spatial Partitioning solutions http://altdevblogaday.org/2011/02/21/spatial-partitioning-part-1-survey-of-spatial-partitioning-solutions/ Brian Lawson of Dark Flow Studios shares what his been up to lately with lots of pretty screenshots and hints of announcements from Microsoft... http://www.darkflowstudios.com/entry/short-and-sweet-part-1 Luke Avery starts a new blog where he plans on making XNA tutorials for beginners (and he’s got a few started already!) http://programmingwithovery.wordpress.com/ Xbox LIVE Indie Games (XBLIG): GameMarx Episode 10 http://www.gamemarx.com/video/the-show/24/ep-10-february-18-2010.aspx Minecraft clone FortressCraft coming to XBLIG http://www.eurogamer.net/articles/2011-02-23-minecraft-clone-fortresscraft-hits-xblig ezMuze+ starts an IndieGoGo fundraiser campaign to help fund their second game and get it onto even more devices! http://www.indiegogo.com/ezmuze Gamergeddon XBLIG round up http://www.gamergeddon.com/2011/02/20/xbox-indie-game-round-up-february-20th/?utm_campaign=twitter&utm_medium=twitter&utm_source=twitter JForce Games loses their Ego http://jforcegames.com/blog/index.php?itemid=121&catid=4 XNA Game Development: @BallerIndustry reminds all XNA developers that the Maths are important ;) http://twitter.com/#!/BallerIndustry/status/39317618280243200 http://www.youtube.com/watch?v=MjV3XDFsjP4&feature=player_embedded#at=106 @suhinini stumbles on an older but extremely useful post on XNA Content Pipeline debugging http://twitter.com/#!/suhinini/status/39270189476352000 http://badcorporatelogo.wordpress.com/2010/10/31/xna-content-pipeline-debugging-4-0/ XNA Game Development Workshops at Singapore Universities http://innovativesingapore.com/2011/02/xna-game-development-workshops-at-singapore-universities/ Indiefreaks announces that IGF v0.3 is out with Xbox 360 support, SunBurn 2.0.12 and it’s now Open Source! http://twitter.com/#!/indiefreaks/status/39391953971982336 @liotral announces a new series on properly designing a game http://twitter.com/#!/liortal53/status/39466905081217024 http://liortalblog.wordpress.com/2011/02/20/hello-cosmos/ Indies and XNA at CodeStock 2011 http://www.gamemarx.com/news/2011/02/20/indies-and-xna-at-codestock-2011.aspx Train Frontier Express posts about XNA Content Hotloading http://trainfrontierexpress.blogspot.com/2011/02/xna-content-hotloading-overview.html Slyprid announces a new character editor in Transmute http://twitter.com/#!/slyprid/status/40146992818696192 http://www.youtube.com/watch?v=OKhFAc78LDs&feature=youtu.be The XNA 2D from the ground up tutorial series http://xna-uk.net/blogs/darkgenesis/archive/2011/02/23/recap-the-xna-2d-from-the-ground-up-tutorial-series.aspx Sgt.Conker posts a “Clingerman” (hey that’s me!) to stay relevant http://www.sgtconker.com/2011/02/posting-a-clingerman-to-stay-relevant/

  Read the article

• Silverlight Cream for December 16, 2010 -- #1011

  - by Dave Campbell

  In this Issue: John Papa, Tim Heuer, Jeff Blankenburg(-2-, -3-), Jesse Liberty, Jay Kimble, Wei-Meng Lee, Paul Sheriff, Mike Snow(-2-, -3-), Samuel Jack, James Ashley, and Peter Kuhn. Above the Fold: Silverlight: "Animation Texture Creator" Peter Kuhn WP7: "dows Phone from Scratch #13 — Custom Behaviors Part II: ActionTrigger" Jesse Liberty Shoutouts: Awesome blog post by Jesse Liberty about writing in general: Ten Requirements For Tutorials, Videos, Demos and White Papers That Don’t Suck From SilverlightCream.com: 1000 Silverlight Cream Posts and Counting! John Papa has Silverlight TV number 55 up and it's an inverview he did with me the day before the Firestarter in December... thanks John... great job in making me not look stooopid :) Silverlight service release today - 4.0.51204 Tim Heuer announced a service release of Silverlight ... check out his blog for the updates and near the bottom is a link to the developer runtime. What I Learned In WP7 – Issue #3 Jeff Blankenburg has been pushing out tips ... number 3 consisted of 3 good pieces of info for WP7 devs including more info about fonts and a good site for free audio files What I Learned In WP7 – Issue #4 In number 4, Jeff Blankenburg talks about where to get some nice free WP7 icons, and a link to a cool article on getting all sorts of device info What I Learned In WP7 – Issue #5 Number 5 finds Jeff Blankenburg giving up the XAP for a CodeMash sessiondata app... or wait for it to appear in the Marketplace next week. Windows Phone from Scratch #13 — Custom Behaviors Part II: ActionTrigger Wow... Jesse Liberty is up to number 13 in his Windows Phone from scratch series... this time it's part 2 of his Custom Behaviors post, and ActionTriggers specifically. Solving the Storage Problem in WP7 (for CF Developers) Jay Kimble has released his WP7 dropbox client to the wild ... this is cool for loading files at run-time... opens up some ideas for me at least. Building Location Service Apps in Windows Phone 7 Wei-Meng Lee has a big informative post on location services in WP7... getting a Bing Maps API key, getting the data, navigating and manipulating the map, adding pushpins... good stuff Using Xml Files on Windows Phone Paul Sheriff is discussing XML files as a database for your WP7 apps via LINQ to XML. Sample code included. ABC–Win7 App Mike Snow has been busy with Tips of the Day ... he published a children's app for tracing their ABC's and discusses some of the code bits involved. Win7 Mobile Application Bar – AG_E_PARSER_BAD_PROPERTY_VALUE Mike Snow's next post is about the infamous AG_E_PARSER_BAD_PROPERTY_VALUE error or worse in WP7 ... how he got it, and how he fixed it... could save you some hair... Forward Navigation on the Windows Phone Mike Snow's latest post is about forward navigation on the WP7 ... oh wait... there isn't any... check out the post. Day 2 of my “3 days to Build a Windows Phone 7 Game” challenge Samuel Jack details about 9 hours in day 2 of his quest to build an XNA app for WP7 from a cold start. Windows Phone 7 Side Loading James Ashley has a really complete write-up on side-loading apps onto your WP7 device. Don't get excited... this isn't a hack... this is instructions for side-loading using the Microsoft-approved methos, which means a registered device. Animation Texture Creator Remember Peter Kuhn's post the other day about an Animation Texture Creator? ... well today he has some added tweaks and the source code! ... thanks Peter! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• F1 Pit Pragmatics

  - by mikef

  "I hate computers. No, really, I hate them. I love the communications they facilitate, I love the conveniences they provide to my life. but I actually hate the computers themselves." - Scott Merrill, 'I hate computers: confessions of a Sysadmin' If Scott's goal was to polarize opinion and trigger raging arguments over the 'real reasons why computers suck', then he certainly succeeded. Impassioned vitriol sits side-by-side with rational debate. Yet Scott's fundamental point is absolutely on the money - Computers are a means to an end. The IT industry is finally starting to put weight behind the notion that good User Experience is an absolutely crucial goal, a cause championed by the likes of Microsoft's Bill Buxton, and which Apple's increasingly ubiquitous touch screen interface exemplifies. However, that doesn't change the fact that, occasionally, you just have to man up and deal with complex systems. In fact, sometimes you just need to sacrifice everything else in the name of performance. You'll find a perfect example of this Faustian bargain in Trevor Clarke's fascinating look into the (diabolical) IT infrastructure of modern F1 racing - high performance, high availability. high everything. To paraphrase, each car has up to 100 sensors, transmitting around 30Gb of data over the course of a race (70% in real-time). This data is then processed by no less than 3 servers (per car) so that the engineers in the pit have access to telemetry, strategy information, timing feeds, a connection back to the operations room in the team's home base - the list goes on. All of this while the servers are exposed "to carbon dust, oil, vibration, rain, heat, [and] variable power". Now, this is admittedly an extreme context where there's no real choice but to use complex systems where ease-of-use is, at best, a secondary concern. The flip-side is seen in small-scale personal computing such as that seen in Apple's iDevices, which are incredibly intuitive but limited in their scope. In terms of what kinds of systems they prefer to use, I suspect that most SysAdmins find themselves somewhere along this axis of Power vs. Usability, and which end of this axis you resonate with also hints at where you think the IT industry should focus its energy. Do you see yourself in the F1 pit, making split-second decisions, wrestling with information flows and reticent hardware to bend them to your will? If so, I imagine you feel that computers are subtle tools which need to be tuned and honed, using the advanced knowledge possessed only by responsible SysAdmins (If you have an iPhone, I suspect it's jail-broken). If the machines throw enigmatic errors, it's the price of flexibility and raw power. Alternatively, would you prefer to have your role more accessible, with users empowered by knowledge, spreading the load of managing IT environments? In that case, then you want hardware and software to have User Experience as their primary focus, and are of the "means to an end" school of thought (you're probably also fed up with users not listening to you when you try and help). At its heart, the dichotomy is between raw power (which might be difficult to use) and ease-of-use (which might have some limitations, but you can be up and running immediately). Of course, the ultimate goal is a fusion of flexibility, power and usability all in one system. It's achievable in specific software environments, and Red Gate considers it a target worth aiming for, but in other cases it's a goal right up there with cold fusion. I think it'll be a long time before we see it become ubiquitous. In the meantime, are you Power-Hungry or a Champion of Usability? Cheers, Michael Francis Simple Talk SysAdmin Editor

  Read the article

• The Latest News About SAP

  - by jmorourke

  Like many professionals, I get a lot of my news from Google e-mail alerts that I’ve set up to keep track of key industry trends and competitive news.  In the past few weeks, I’ve been getting a number of news alerts about SAP.  Below are a few recent examples: Warm weather cuts short US maple sugaring season – by Toby Talbot, AP MILWAUKEE – Temperatures in Wisconsin had already hit the high 60s when Gretchen Grape and her family began tapping their 850 maple trees. They had waited for the state's ceremonial tapping to kick off the maple sugaring season. It was moved up five days, but that didn't make much difference. For Grape, the typically month-long season ended nine days later. The SAP had stopped flowing in a record-setting heat wave, and the 5-quart collection bags that in a good year fill in a day were still half-empty. Instead of their usual 300 gallons of syrup, her family had about 40. Maple syrup producers across the North have had their season cut short by unusually warm weather. While those with expensive, modern vacuum systems say they've been able to suck a decent amount of sap from their trees, producers like Grape, who still rely on traditional taps and buckets, have seen their year ruined. "It's frustrating," said the 69-year-old retiree from Holcombe, Wis. "You put in the same amount of work, equipment, investment, and then all of a sudden, boom, you have no SAP." Home & Garden: Too-Early Spring Means Sugaring Woes  - by Georgeanne Davis for The Free Press Over this past weekend, forsythia and daffodils were blooming in the southern parts of the state as temperatures climbed to 85 degrees, and trees began budding out, putting an end to this year's maple syrup production even as the state celebrated Maine Maple Sunday. Maple sugaring needs cold nights and warm days to induce SAP flows. Once the trees begin budding, SAP can still flow, but the SAP is bitter and has an off taste. Many farmers and dairymen count on sugaring for extra income, so the abbreviated season is a real financial loss for them, akin to the shortened shrimping season's effect on Maine lobstermen. SAP season comes to a sugary Sunday finale – Kennebec Journal, March 26th, 2012 Rebecca Manthey stood out in the rain at the entrance of Old Fort Western keeping watch over a cast iron kettle of boiling SAP hooked to a tripod over a wood fire.  Manthey and the rest of the Old Fort Western staff -- decked out in 18th-century attire -- joined sugar houses across the state in observance of Maine Maple Sunday. The annual event is sponsored by the Department of Agriculture and the Maine Maple Producers Association.  She said the rain hadn't kept people from coming to enjoy all the events at the fort surrounding the production of Maple syrup.  "In the 18th century, you would be boiling SAP in the woods, so I would be in the woods," Manthey explained to the families who circled around her. "People spent weeks and weeks in the woods. You don't want to cook it to fast or it would burn. When it looks like the right consistency then you send it (into the kitchen) to be made into sugar." Manthey said she enjoyed portraying an 18th-century woman, even in the rain, which didn't seem to bother visitors either. There was a steady stream of families touring the fort and enjoying the maple syrup demonstrations. I hope you enjoy these updates on SAP – Happy April Fool’s Day!

  Read the article

• Oredev 2011 Trip Report

  - by arungupta

  Oredev had its seventh annual conference in the city of Malmo, Sweden last week. The name "Oredev" signifies to the part that Malmo is connected with Copenhagen with Oresund bridge. There were about 1000 attendees with several speakers from all over the world. The first two days were hands-on workshops and the next three days were sessions. There were different tracks such as Java, Windows 8, .NET, Smart Phones, Architecture, Collaboration, and Entrepreneurship. And then there was Xtra(ck) which had interesting sessions not directly related to technology. I gave two slide-free talks in the Java track. The first one showed how to build an end-to-end Java EE 6 application using NetBeans and GlassFish. The complete instructions to build the application are explained in detail here. This 3-tier application used Java Persistence API, Enterprsie Java Beans, Servlet, Contexts and Dependency Injection, JavaServer Faces, and Java API for RESTful Services. The source code built during the application can be downloaded here (LINK TBD). The second session, slide-free again, showed how to take a Java EE 6 application into production using GlassFish cluster. It explained: Create a 2-instance GlassFish cluster Front-end with a Web server and a load balancer Demonstrate session replication and fail over Monitor the application using JavaScript The complete instructions for this session are available here. Oredev has an interesting way of collecting attendee feedback. The attendees drop a green, yellow, or red card in a bucket as they walk out of the session. Not everybody votes but most do. Other than the instantaneous feedback provided on twitter, this mechanism provides a more coarse grained feedback loop as well. The first talk had about 67 attendees (with 23 green and 7 yellow) and the second one had 22 (11 green and 11 yellow). The speakers' dinner is a good highlight of the conference. It is arranged in the historic city hall and the mayor welcomed all the speakers. As you can see in the pictures, it is a very royal building with lots of history behind it. Fortunately the dinner was a buffet with a much better variety unlike last year where only black soup and geese were served, which was quite cultural BTW ;-) The sauna in 85F, skinny dipping in 35F ocean and alternating between them at Kallbadhus is always very Swedish. Also spent a short evening at a friend's house socializing with other speaker/attendees, drinking Glogg, and eating Pepperkakor.  The welcome packet at the hotel also included cinnamon rolls, recommended to drink with cold milk, for a little more taste of Swedish culture. Something different at this conference was how artists from Image Think were visually capturing all the keynote speakers using images on whiteboards. Here are the images captured for Alexis Ohanian (Reddit co-founder and now running Hipmunk): Unfortunately I could not spend much time engaging with other speakers or attendees because was busy preparing a new hands-on lab material. But was able to spend some time with Matthew Mccullough, Micahel Tiberg, Magnus Martensson, Mattias Karlsson, Corey Haines, Patrick Kua, Charles Nutter, Tushara, Pradeep, Shmuel, and several other folks. Here are a few pictures captured from the event: And the complete album here: Thank you Matthias, Emily, and Kathy for putting up a great show and giving me an opportunity to speak at Oredev. I hope to be back next year with a more vibrant representation of Java - the language and the ecosystem!

  Read the article

• Oredev 2011 Trip Report

  - by arungupta

  Oredev had its seventh annual conference in the city of Malmo, Sweden last week. The name "Oredev" signifies to the part that Malmo is connected with Copenhagen with Oresund bridge. There were about 1000 attendees with several speakers from all over the world. The first two days were hands-on workshops and the next three days were sessions. There were different tracks such as Java, Windows 8, .NET, Smart Phones, Architecture, Collaboration, and Entrepreneurship. And then there was Xtra(ck) which had interesting sessions not directly related to technology. I gave two slide-free talks in the Java track. The first one showed how to build an end-to-end Java EE 6 application using NetBeans and GlassFish. The complete instructions to build the application are explained in detail here. This 3-tier application used Java Persistence API, Enterprsie Java Beans, Servlet, Contexts and Dependency Injection, JavaServer Faces, and Java API for RESTful Services. The source code built during the application can be downloaded here (LINK TBD). The second session, slide-free again, showed how to take a Java EE 6 application into production using GlassFish cluster. It explained: Create a 2-instance GlassFish cluster Front-end with a Web server and a load balancer Demonstrate session replication and fail over Monitor the application using JavaScript The complete instructions for this session are available here. Oredev has an interesting way of collecting attendee feedback. The attendees drop a green, yellow, or red card in a bucket as they walk out of the session. Not everybody votes but most do. Other than the instantaneous feedback provided on twitter, this mechanism provides a more coarse grained feedback loop as well. The first talk had about 67 attendees (with 23 green and 7 yellow) and the second one had 22 (11 green and 11 yellow). The speakers' dinner is a good highlight of the conference. It is arranged in the historic city hall and the mayor welcomed all the speakers. As you can see in the pictures, it is a very royal building with lots of history behind it. Fortunately the dinner was a buffet with a much better variety unlike last year where only black soup and geese were served, which was quite cultural BTW ;-) The sauna in 85F, skinny dipping in 35F ocean and alternating between them at Kallbadhus is always very Swedish. Also spent a short evening at a friend's house socializing with other speaker/attendees, drinking Glogg, and eating Pepperkakor.  The welcome packet at the hotel also included cinnamon rolls, recommended to drink with cold milk, for a little more taste of Swedish culture. Something different at this conference was how artists from Image Think were visually capturing all the keynote speakers using images on whiteboards. Here are the images captured for Alexis Ohanian (Reddit co-founder and now running Hipmunk): Unfortunately I could not spend much time engaging with other speakers or attendees because was busy preparing a new hands-on lab material. But was able to spend some time with Matthew Mccullough, Micahel Tiberg, Magnus Martensson, Mattias Karlsson, Corey Haines, Patrick Kua, Charles Nutter, Tushara, Pradeep, Shmuel, and several other folks. Here are a few pictures captured from the event: And the complete album here: Thank you Matthias, Emily, and Kathy for putting up a great show and giving me an opportunity to speak at Oredev. I hope to be back next year with a more vibrant representation of Java - the language and the ecosystem!

  Read the article

• Apprentice Boot Camp in South Africa (Part 2)

  - by Tim Koekkoek

  By Maximilian Michel (DE), Jorge Garnacho (ES), Daniel Maull (UK), Adam Griffiths (UK), Guillermo De Las Nieves (ES), Catriona McGill (UK), Ed Dunlop (UK) Today we have the second part of the adventures of seven apprentices from all over Europe in South-Africa!  Kruger National Park & other experiences Going to the Kruger National Park was definitely an experience we will all remember for the rest of our lives. This trip,organised by Patrick Fitzgerald, owner of the Travellers Nest (where we all stayed), took us from the hustle and bustle of Joburg to experience what Africa is all about, the wild! Although the first week’s training we had prior to this trip to the Kruger was going very well, we all knew this was to be a very nice break before we started the second week of training. And we were right, the animals, scenery and sights we saw were just simply incredible and like I said something we will remember for the rest of our lives. To see lions, elephants, cheetahs and rhinos and many more in a zoo is one thing, but to see them in the wild, in their natural habitat is very special and I personally only realised this from the early 5 am start on the first morning in the Kruger, which was definitely worth it. Not only was it all about the safari, we ate some wonderful food, in particular on the Saturday night, Patrick made us a traditional South African Braai which was one of my favourite meals of the whole two weeks. After the Kruger National Park we had a whole day of traveling back to Johannesburg but even this was made to be a good day by our hosts. Despite the early start on the road it was all worth it by the time we reached God's Window. The walk to the top was made a lot harder by all the steaks we had eaten in the first week but the hard walk was worth it at the top, with views that stretched for miles. The Food The food in South Africa is typically meat and in big amounts, while there we ate a lot of big beef steaks, ribs and kudu sausage. All of the meat we ate was usually cooked with a sauce such as a Barbeque glaze. The restaurants we visited were: Upperdeck Restaurant, with live music and a great terrace to eat, the atmosphere was good for enjoying the music and eating our food. Most of us ate  Spare ribs that weighed 600 kg, with barbecue sauce that was delicious. Die Bosvelder Pub & Restaurant is a restaurant with a very surprising decor, this is because the walls had many of south Africa’s famous animals on them. The food was maybe the best we ate in South Africa. Our orders were: Springbokvlakte Lambs' Neck Stew, beef in gravy and steaks topped with cheese and then more meat on top! All meals were accompanied by a selection of white sauce cauliflower, spinach and zanhorias. Pepper Chair Restaurant, where the specialty is T-Bone steaks of 1.4 kg, but most of us were happy to attempt the 1 kg. Cooked with barbecue sauce over the meat, it was very good!  The only problem was their size causing the  the meat to get cold if you did not eat it very fast! We’re all waiting for our 1.0 kg t-bone steak including our Senior Director EMEA Systems Support Germany & Switzerland: Werner Hoellrigl The Godfather Restaurant, the food here was more meat in abundance. We ate: great ribs, hamburgers, steaks and all accompanied with a small plates of carrot and sauteed spinach, very good. We had two great weeks in South-Africa! If you want to join Oracle, then check http://campus.oracle.com 

  Read the article

• Why Is Hibernation Still Used?

  - by Jason Fitzpatrick

  With the increased prevalence of fast solid-state hard drives, why do we still have system hibernation? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader Moses wants to know why he should use hibernate on a desktop machine: I’ve never quite understood the original purpose of the Hibernation power state in Windows. I understand how it works, what processes take place, and what happens when you boot back up from Hibernate, but I’ve never truly understood why it’s used. With today’s technology, most notably with SSDs, RAM and CPUs becoming faster and faster, a cold boot on a clean/efficient Windows installation can be pretty fast (for some people, mere seconds from pushing the power button). Standby is even faster, sometimes instantaneous. Even SATA drives from 5-6 years ago can accomplish these fast boot times. Hibernation seems pointless to me [on desktop computers] when modern technology is considered, but perhaps there are applications that I’m not considering. What was the original purpose behind hibernation, and why do people still use it? Quite a few people use hibernate, so what is Moses missing in the big picture? The Answer SuperUser contributor Vignesh4304 writes: Normally hibernate mode saves your computer’s memory, this includes for example open documents and running applications, to your hard disk and shuts down the computer, it uses zero power. Once the computer is powered back on, it will resume everything where you left off. You can use this mode if you won’t be using the laptop/desktop for an extended period of time, and you don’t want to close your documents. Simple Usage And Purpose: Save electric power and resuming of documents. In simple terms this comment serves nice e.g (i.e. you will sleep but your memories are still present). Why it’s used: Let me describe one sample scenario. Imagine your battery is low on power in your laptop, and you are working on important projects on your machine. You can switch to hibernate mode – it will result your documents being saved, and when you power on, the actual state of application gets restored. Its main usage is like an emergency shutdown with an auto-resume of your documents. MagicAndre1981 highlights the reason we use hibernate everyday: Because it saves the status of all running programs. I leave all my programs open and can resume working the next day very easily. Doing a real boot would require to start all programs again, load all the same files into those programs, get to the same place that I was at before, and put all my windows in exactly the same place. Hibernating saves a lot of work pulling these things back up again. It’s not unusual to find computers around the office here that have been hibernated day in and day out for months without an actual full system shutdown and restart. It’s enormously convenient to freeze your work space at the exact moment you stopped working and to turn right around and resume there the next morning. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.     

  Read the article

• Learn Many Languages

  - by Phil Factor

  Around twenty-five years ago, I was trying to solve the problem of recruiting suitable developers for a large business. I visited the local University (it was a Technical College then). My mission was to remind them that we were a large, local employer of technical people and to suggest that, as they were in the business of educating young people for a career in IT, we should work together. I anticipated a harmonious chat where we could suggest to them the idea of mentioning our name to some of their graduates. It didn’t go well. The academic staff displayed a degree of revulsion towards the whole topic of IT in the world of commerce that surprised me; tweed met charcoal-grey, trainers met black shoes. However, their antipathy to commerce was something we could have worked around, since few of their graduates were destined for a career as university lecturers. They asked me what sort of language skills we needed. I tried ducking the invidious task of naming computer languages, since I wanted recruits who were quick to adapt and learn, with a broad understanding of IT, including development methodologies, technologies, and data. However, they pressed the point and I ended up saying that we needed good working knowledge of C and BASIC, though FORTRAN and COBOL were, at the time, still useful. There was a ghastly silence. It was as if I’d recommended the beliefs and practices of the Bogomils of Bulgaria to a gathering of Cardinals. They stared at me severely, like owls, until the head of department broke the silence, informing me in clipped tones that they taught only Modula 2. Now, I wouldn’t blame you if at this point you hurriedly had to look up ‘Modula 2′ on Wikipedia. Based largely on Pascal, it was a specialist language for embedded systems, but I’ve never ever come across it in a commercial business application. Nevertheless, it was an excellent teaching language since it taught modules, scope control, multiprogramming and the advantages of encapsulating a set of related subprograms and data structures. As long as the course also taught how to transfer these skills to other, more useful languages, it was not necessarily a problem. I said as much, but they gleefully retorted that the biggest local employer, a defense contractor specializing in Radar and military technology, used nothing but Modula 2. “Why teach any other programming language when they will be using Modula 2 for all their working lives?” said a complacent lecturer. On hearing this, I made my excuses and left. There could be no meeting of minds. They were providing training in a specific computer language, not an education in IT. Twenty years later, I once more worked nearby and regularly passed the long-deserted ‘brownfield’ site of the erstwhile largest local employer; the end of the cold war had led to lean times for defense contractors. A digger was about to clear the rubble of the long demolished factory along with the accompanying growth of buddleia and thistles, in order to lay the infrastructure for ‘affordable housing’. Modula 2 was a distant memory. Either those employees had short working lives or they’d retrained in other languages. The University, by contrast, was thriving, but I wondered if their erstwhile graduates had ever cursed the narrow specialization of their training in IT, as they struggled with the unexpected variety of their subsequent careers.

  Read the article

• Universities 2030: Learning from the Past to Anticipate the Future

  - by Mohit Phogat

  What will the landscape of international higher education look like a generation from now? What challenges and opportunities lie ahead for universities, especially “global” research universities? And what can university leaders do to prepare for the major social, economic, and political changes—both foreseen and unforeseen—that may be on the horizon? The nine essays in this collection proceed on the premise that one way to envision “the global university” of the future is to explore how earlier generations of university leaders prepared for “global” change—or at least responded to change—in the past. As the essays in this collection attest, many of the patterns associated with contemporary “globalization” or “internationalization” are not new; similar processes have been underway for a long time (some would say for centuries).[1] A comparative-historical look at universities’ responses to global change can help today’s higher-education leaders prepare for the future. Written by leading historians of higher education from around the world, these nine essays identify “key moments” in the internationalization of higher education: moments when universities and university leaders responded to new historical circumstances by reorienting their relationship with the broader world. Covering more than a century of change—from the late nineteenth century to the early twenty-first—they explore different approaches to internationalization across Europe, Asia, Australia, North America, and South America. Notably, while the choice of historical eras was left entirely open, the essays converged around four periods: the 1880s and the international extension of the “modern research university” model; the 1930s and universities’ attempts to cope with international financial and political crises; the 1960s and universities’ role in an emerging postcolonial international development apparatus; and the 2000s and the rise of neoliberal efforts to reform universities in the name of international economic “competitiveness.” Each of these four periods saw universities adopt new approaches to internationalization in response to major historical-structural changes, and each has clear parallels to today. Among the most important historical-structural challenges that universities confronted were: (1) fluctuating enrollments and funding resources associated with global economic booms and busts; (2) new modes of transportation and communication that facilitated mobility (among students, scholars, and knowledge itself); (3) increasing demands for applied science, technical expertise, and commercial innovation; and (4) ideological reconfigurations accompanying regime changes (e.g., from one internal regime to another, from colonialism to postcolonialism, from the cold war to globalized capitalism, etc.). Like universities today, universities in the past responded to major historical-structural changes by internationalizing: by joining forces across space to meet new expectations and solve problems on an ever-widening scale. Approaches to internationalization have typically built on prior cultural or institutional ties. In general, only when the benefits of existing ties had been exhausted did universities reach out to foreign (or less familiar) partners. As one might expect, this process of “reaching out” has stretched universities’ traditional cultural, political, and/or intellectual bonds and has invariably presented challenges, particularly when national priorities have differed—for example, with respect to curricular programs, governance structures, norms of academic freedom, etc. Strategies of university internationalization that either ignore or downplay cultural, political, or intellectual differences often fail, especially when the pursuit of new international connections is perceived to weaken national ties. If the essays in this collection agree on anything, they agree that approaches to internationalization that seem to “de-nationalize” the university usually do not succeed (at least not for long). Please continue reading the other essays at http://globalhighered.wordpress.com/

  Read the article

• Missing Fields and Default Values

  - by PointsToShare

  © 2011 By: Dov Trietsch. All rights reserved Dealing with Missing Fields and Default Values New fields and new default values are not propagated throughout the list. They only apply to new and updated items and not to items already entered. They are only prospective. We need to be able to deal with this issue. Here is a scenario. The user has an old list with old items and adds a new field. The field is not created for any of the old items. Trying to get its value raises an Argument Exception. Here is another: a default value is added to a field. All the old items, where the field was not assigned a value, do not get the new default value. The two can also happen in tandem – a new field is added with a default. The older items have neither. Even better, if the user changes the default value, the old items still carry the old defaults. Let’s go a bit further. You have already written code for the list, be it an event receiver, a feature receiver, a console app or a command extension, in which you span all the fields and run on selected items – some new (no problem) and some old (problems aplenty). Had you written defensive code, you would be able to handle the situation, including similar changes in the future. So, without further ado, here’s how. Instead of just getting the value of a field in an item – item[field].ToString() – use the function below. I use ItemValue(item, fieldname, “mud in your eye”) and if “mud in your eye” is what I get, I know that the item did not have the field.   /// <summary> /// Return the column value or a default value /// </summary> private static string ItemValue(SPItem item, string column, string defaultValue) {     try     {         return item[column].ToString();     }     catch (NullReferenceException ex)     {         return defaultValue;     }     catch (ArgumentException ex)     {         return defaultValue;     } } I also use a similar function to return the default and a funny default-default to ascertain that the default does not exist. Here it is:  /// <summary> /// return a fields default or the "default" default. /// </summary> public static string GetFieldDefault(SPField fld, string defValue) {     try     {         // -- Check if default exists.         return fld.DefaultValue.ToString();     }     catch (NullReferenceException ex)     {         return defValue;     }     catch (ArgumentException ex)     {         return defValue;     } } How is this defensive? You have trapped an expected error and dealt with it. Therefore the program did not stop cold in its track and the required code ran to its end. Now, take a further step - write to a log (See Logging – a log blog). Read your own log every now and then, and act accordingly. That’s all Folks!

  Read the article

• ADO and Two Way Storage Tiering

  - by Andy-Oracle

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 We get asked the following question about Automatic Data Optimization (ADO) storage tiering quite a bit. Can you tier back to the original location if the data gets hot again? The answer is yes but not with standard Automatic Data Optimization policies, at least not reliably. That's not how ADO is meant to operate. ADO is meant to mirror a traditional view of Information Lifecycle Management (ILM) where data will be very volatile when first created, will become less active or cool, and then will eventually cease to be accessed at all (i.e. cold). I think the reason this question gets asked is because customers realize that many of their business processes are cyclical and the thinking goes that those segments that only get used during month end or year-end cycles could sit on lower cost storage when not being used. Unfortunately this doesn't fit very well with the ADO storage tiering model. ADO storage tiering is based on the amount of free and used space in the source tablespace. There are two parameters that control this behavior, TBS_PERCENT_USED and TBS_PERCENT_FREE. When the space in the tablespace exceeds the TBS_PERCENT_USED value then segments specified in storage tiering clause(s) can be moved until the percent of free space reaches the TBS_PERCENT_FREE value. It is worth mentioning that no checks are made for available space in the target tablespace. Now, it is certainly possible to create custom functions to control storage tiering, but this can get complicated. The biggest problem is insuring that there is enough space to move the segment back to tier 1 storage, assuming that that's the goal. This isn't as much of a problem when moving from tier 1 to tier 2 storage because there is typically more tier 2 storage available. At least that's the premise since it is supposed to be less costly, lower performing and higher capacity storage. In either case though, if there isn't enough space then the operation fails. In the case of a customized function, the question becomes do you attempt to free the space so the move can be made or do you just stop and return false so that the move cannot take place? This is really the crux of the issue. Once you cross into this territory you're really going to have to implement two-way hierarchical storage and the whole point of ADO was to provide automatic storage tiering. You're probably better off using heat map and/or business access requirements and building your own hierarchical storage management infrastructure if you really want two way storage tiering. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Software Center seems to freeze system when installing, syslog has "blocked for more than 120 seconds" errors

  - by nbm

  12.04 (precise) 64-bit Kernel Linux 3.2.0-39 3.6GB memory Intel Core 2 Duo CPU @ 2.40GHz x2 WUBI-installed Ubuntu running on a MacBook Pro 7.1 with OSX running Vista via Boot Camp (hey, I like lots of OS's m'kay?) When installing from Ubuntu software center my system very frequently freezes. This has happened 4 of the last 5 installs. Most recently I was installing the Google Earth .deb from Google's website: clicking the .deb file automatically opens Software Center (otherwise I would have used Synaptic, as I've grown to expect Software Center to freeze my system and I'm rather tired of it.) By "freeze" I mean nothing works: no dash, no launcher, no mouse movement, no alt-tab, can't open terminal (keyboard does not work). Software center does show the "installing" icon but after that it greys out and I can't click anything. REISUB has no effect but a cold power-down and restart is possible. Occasionally, after 5-10 minutes, I'll be able to move the mouse / use the keyboard and run a launcher command or two, although other open apps (Chrome and Software Center) will still be greyed-out/frozen. (I've never waited longer than that - if still unresponsive after 15 minutes I just power down and restart.) Most recently, which is why I am finally posting a question, I waited about 15 minutes and was finally able to open System Monitor while this was going on. Processes tells me that System Monitor is using about 20% of CPU, and nothing else is using much (zeros mostly). In fact I didn't even see Software Center listed? However at this point the system finally partially unfroze, the installation completed, and while I wasn't about to close Software Center I was able to do a system shutdown and fresh restart and I went and took a look at the syslog. In /var/log/syslog I see a lot of ":blocked for more than 120 seconds" messages. Similar to ubuntu hang out with this message :blocked for more than 120 seconds Which has not been answered, and I'm not running a virtual machine. My full syslog with stack traces looks very, very similar to this: Why do tasks on Amazon Xen instance block for over 120 seconds causing server to hang? Note that that question was solved, but that's because the problem was being caused by Amazon and Amazon fixed the bug. I'm not running anything Amazon-related. My syslog does look very similar, however. My question is also similar to this: Troubleshooting server hang But the referenced "duplicate" in that question is about how to kill processes/restart when the system freezes. I know how to kill processes and restart. I want to figure out what is causing the problem so I can try to fix it. I realize that I could just use Synaptic instead of Ubuntu Software Center, but I'd like to try to solve the problem if possible. I'm thinking I should perhaps submit a bug report, but I wanted to first see if anyone else was having any similar problems, and if so what you all did to fix it. I see a number of questions about Software Center freezing and others, including those I linked, about the "blocked for more than 120 seconds" log error, but I didn't see any question that links the two. I did save a copy of the syslog report if anyone wants to see it, but as mentioned it's quite similar to the one posted in the Amazon-related question...and I didn't want to take up even more space unnecessarily as, my apologies - this question has already become extremely verbose!

  Read the article

• Asus X202e VivoBook, dual boot. How to get around UEFI and have Win8 & Ubuntu?

  - by Nukeface

  I've gotten my hands on an Asus Vivobook X202e. I like it, handy to use, small, etc etc. Oh, it's the i3 core version. For school I still need Windows * sigh * for the .NET development. (I know, possible in Ubuntu, this n that, but for ease atm wanting to keep it with Win8). So. How to install both on this little thing? I've found a way into the BIOS (before splash screen, mash F2. Works only after reboot, not cold boot). But the whole boot loading setup is different than from what I know, and I must've messed up something because it's been "Attempting Repairs", "Analyzing hard disk", and a bunch of other things for the past 15 minutes. (All I've done is selected "disabled" on secure boot, picky as ** Microsoft). Keeping the original Windows installation is of no concern. Found the product key already and have a clean install waiting. BTW, not trying to leech knowledge, even though first question and no answers. I'm more and more active on Stackoverflow. But, especially due to secure boot and windows 8, I'm going over to Ubuntu. Well, more and more anyway, I like my Windows based games as well ;) UPDATE Managed to do a clean install of Windows 8 Pro. After disabling Secure Boot, also had to disable fast boot, and enable Launch CSM, leaving the option which appeared (Launch PXE OpROM) disabled. Then I rebooted, with the USB Boot drive I created using the Windows 7 USB DVD Download Tool (scroll down for download link), provided by Microsoft. During the installation, I chose to install a clean version, therefor deleted the partitions containing current windows files. I left the Recovery partition (you never know...). Of course, the new Windows Installation dit not like this. Apparantly Windows cannot be installed on a GPT hard disk. Remember I hadn't changed the partition table, was still factory default! Minus a few partitions, granted. So deleted ALL partittions, did a format of the disk, created a new partition. Et voila, Windows installation started. FINALLY! WONDROUS After the installation, Windows still had background images located in C:/Users/ ME /AppData/Local/Microsoft/Themes/RoamedThemeFiles/DesktopBackground/ that I had in the previous installation. Before doing: format, delete partition, cascade partitions, create new partition of different size, format partition, install Windows. It managed to keep the images through all that. Anyone got an idea on that one? It also remembered the settings for the Windows Aero theme... UPDATED QUESTION: After all this you'd think I'd have the rest figured out. Wrong. Ubuntu 12.10, 64 bit installation can't read the partitioning of the hdd during the installation. Any ideas on how to fix this so the install for a dual-boot system can proceed? (Preferably without starting anew with Windows as well ;) )

  Read the article

• What is the worst programming language you ever worked with? [closed]

  - by Ludwig Weinzierl

  If you have an interesting story to share, please post an answer, but do not abuse this question for bashing a language. We are programmers, and our primary tool is the programming language we use. While there is a lot of discussion about the best one, I'd like to hear your stories about the worst programming languages you ever worked with and I'd like to know exactly what annoyed you. I'd like to collect this stories partly to avoid common pitfalls while designing a language (especially a DSL) and partly to avoid quirky languages in the future in general. This question is not subjective. If a language supports only single character identifiers (see my own answer) this is bad in a non-debatable way. EDIT Some people have raised concerns that this question attracts trolls. Wading through all your answers made one thing clear. The large majority of answers is appropriate, useful and well written. UPDATE 2009-07-01 19:15 GMT The language overview is now complete, covering 103 different languages from 102 answers. I decided to be lax about what counts as a programming language and included anything reasonable. Thank you David for your comments on this. Here are all programming languages covered so far (alphabetical order, linked with answer, new entries in bold): ABAP, all 20th century languages, all drag and drop languages, all proprietary languages, APF, APL (1), AS400, Authorware, Autohotkey, BancaStar, BASIC, Bourne Shell, Brainfuck, C++, Centura Team Developer, Cobol (1), Cold Fusion, Coldfusion, CRM114, Crystal Syntax, CSS, Dataflex 2.3, DB/c DX, dbase II, DCL, Delphi IDE, Doors DXL, DOS batch (1), Excel Macro language, FileMaker, FOCUS, Forth, FORTRAN, FORTRAN 77, HTML, Illustra web blade, Informix 4th Generation Language, Informix Universal Server web blade, INTERCAL, Java, JavaScript (1), JCL (1), karol, LabTalk, Labview, Lingo, LISP, Logo, LOLCODE, LotusScript, m4, Magic II, Makefiles, MapBasic, MaxScript, Meditech Magic, MEL, mIRC Script, MS Access, MUMPS, Oberon, object extensions to C, Objective-C, OPS5, Oz, Perl (1), PHP, PL/SQL, PowerDynamo, PROGRESS 4GL, prova, PS-FOCUS, Python, Regular Expressions, RPG, RPG II, Scheme, ScriptMaker, sendmail.conf, Smalltalk, Smalltalk , SNOBOL, SpeedScript, Sybase PowerBuilder, Symbian C++, System RPL, TCL, TECO, The Visual Software Environment, Tiny praat, TransCAD, troff, uBasic, VB6 (1), VBScript (1), VDF4, Vimscript, Visual Basic (1), Visual C++, Visual Foxpro, VSE, Webspeed, XSLT The answers covering 80386 assembler, VB6 and VBScript have been removed.

  Read the article

• PHP's SimpleXML: How to use colons in names

  - by nute

  I am trying to generate an RSS Google Merchant, using SimpleXML. The sample given by Google is: <?xml version="1.0"?> <rss version="2.0" xmlns:g="http://base.google.com/ns/1.0"> <channel> <title>The name of your data feed</title> <link>http://www.example.com</link> <description>A description of your content</description> <item> <title>Red wool sweater</title> <link> http://www.example.com/item1-info-page.html</link> <description>Comfortable and soft, this sweater will keep you warm on those cold winter nights.</description> <g:image_link>http://www.example.com/image1.jpg</g:image_link> <g:price>25</g:price> <g:condition>new</g:condition> <g:id>1a</g:id> </item> </channel> </rss> My code has things like: $product->addChild("g:condition", 'new'); Which generates: <condition>new</condition> I read online that I should instead use: $product->addChild("g:condition", 'new', 'http://base.google.com/ns/1.0'); Which now generates: <g:condition xmlns:g="http://base.google.com/ns/1.0">new</g:condition> This seems very counter-intuitive to me, as now the "xmlns" declaration is on almost EVERY line of my RSS feed intead of just once in the root element. Am I missing something?

  Read the article

• Porting a select loop application to Android with NDK. Design question.

  - by plaisthos

  Hi, I have an network application which uses a select loop like this: bool shutdown=false; while (!shutdown) { [do something] select(...,timeout); } THe main loop cannot work like this in an Android application anymore since the application needs to receive Intents, need to handle GUI, etc. I think I have basically three possibilities: Move the main loop to the java part of the application. Let the loop run in its own thread and somehow communicate from/to java. Screw Android <= 2.3 and use a native activity and use AInputQueue/ALooper instead of select. The first possibility is not easy since java has no select which works on fds. Simply using the select and return after each loop to java is not an elegant possibility either since that requires setting the timeout to something like 20ms to have a good response time in the java part of the program. The second probability sound nicer but I have do some communication between java and the c++/c part of the program. Things that cold work: Using a socket, kind of ugly. using native calls in the "java gui thread" and callback from native in the "c thread". Both threads need to have thread safe implementations but this is managable. I have not explored the third possibility but I think that it is not the way to go. I think I can hack something together which will work but I asking what is the best path to chose.

  Read the article

• Sending mail php

  - by user195257

  Hey, no idea why this sint working, but the message is being sent as "0". I think the e-mail form is what is causing it <?php if ($_POST['check'] == 'checked'){ header("location: /nospamplease.html"); exit(); } $name = $_POST['name']; $email = $_POST['email']; $phone = $_POST['phone']; $date = $_POST['date']; $children = $_POST['children']; $hot = $_POST['hot']; $comments = $_POST['comments']; /*echo $name; echo $email; echo $phone; echo $date; echo $children; echo $hot; echo $comments;*/ if($name == "" || $email == "" || $phone == "" || $date == "" || $children == "" || $hot == "" || $comments == ""){ echo "Please ensure all fields were filled out!"; exit(); }else{ $to = "######"; $subject = "Birthday enquiry"; $message = $message + "Name: "+$name; $message = $message + "Email: "+$email; $message = $message + "Phone: "+$phone; $message = $message + "Date: "+$date; $message = $message + "Children: "+$children; $message = $message + "Hot or cold: "+$hot; $message = $message + "Comments: "+$comments; //echo $message; if(mail($to, $subject, $message)){ echo "Thank you for your enquiry, we will contact you within the next 24 hours! <br /> Click <a href='###'> here</a> to go back to the website!"; }else{ echo "There was an error, contact us directly: <a href='mailto:##'>email</a>"; } } ?> I echoed out the variables, they all are getting posted fine Thanks guys

  Read the article

• jquery ui tabs problem

  - by Eagletrophy

  hi good people, been a while I have had my hands full with a cold but I came back to a problem we never found an answer to, it the homepage of a site I am workin and I said that my tabs would just scatter on a resolution less than mine or around it but not quite. I am on a 1280x800 screen and it displays no problem but as soon as I drop to 1024x768 or 1280x1024 or anything like that this is what it looks like. I wanted to post the code but it means posting alot of HTML and I don't think that will be healthy. hopefully the screenshot will. some one said a while back that my tabs were too big so i reduced them and still. here is the screen shot though: HERE IS THE CSS THAT POWERS THE ADVERTS. THE CSS FOR THE REST OF THE SITE IS JUST A NORMAL JQUERY UI BASE. #adverts{ padding:0px; width:400px; height:109px; float: right; margin-top: auto; margin-left:320px; /* margin-right: auto; */ } enter code here

  Read the article

• Django + jQuery: Sometimes AJAX, but always DRY?

  - by Justin Myles Holmes

  Let's say I have an app (in Django) for which I want to sometimes (but not always) load content via ajax. An easy example is logging in. When the user logs in, I don't want to refresh the page, just change things around. Yet, if they are already logged in, and then arrive at (or refresh) the same page, I want it to show the same content. So, in the first case, obviously I do some sort of ajax login and load changes to the page accordingly. Easy enough. But what about in the second case? Do I go back through and add {% if user.authenticated %} all over the place? This seems cold, dark, and WET. On the other hand, I can just wrap all the ajaxy stuff in a javascript function, called loggedIn(), and run that if the user is authenticated. But then I'm faced with two http requests instead of one. Also undesirable. So what's the standard solution here?

  Read the article

• Link doesnt work in FF

  - by venom

  Here is the link: <a href="javascript://" onClick="print_gonder();"><img src="/images/print.gif" title="Gönder" border="0"></a> and its function print_gonder: function print_gonder() { var satirsayisi=document.list_basketww.row_count.value; var amnt=new Array(satirsayisi); var prc=new Array(satirsayisi); var kdv=new Array(satirsayisi); var kon=new Array(satirsayisi); var yap=new Array(satirsayisi); var ona=new Array(satirsayisi); var ode=new Array(satirsayisi); var tes=new Array(satirsayisi); for (i=0; i<satirsayisi; i++) { amnt[i]=eval("document.getElementById('amount" + (i+1) + "')").value; prc[i]=filterNum(eval("document.getElementById('price" + (i+1) + "')").value); kdv[i]=eval("document.getElementById('tax_dif" + (i+1) + "')").value; kon=eval("document.getElementById('konu')").value; yap=eval("document.getElementById('yapan')").value; ona=eval("document.getElementById('onay')").value; ode=eval("document.getElementById('odeme')").value; tes=eval("document.getElementById('teslim')").value; } windowopen('<cfoutput>#request.self#?fuseaction=objects2.popup_sale_propose&print=true#page_code#&amnt='+amnt+'&prc='+prc+'&kdv='+kdv+'&konu='+kon+'&yapan='+yap+'&onay='+ona+'&odeme='+ode+'&teslim='+tes+'</cfoutput>','page'); } The problem is that this link doesnt work in FF but work in IE, but if i change the function into something like this: <a href="javascript://" onClick="<cfoutput>windowopen('#request.self#?fuseaction=objects2.popup_sale_propose&print=true#page_code#','page')</cfoutput"><img src="/images/print.gif" title="Gönder" border="0"></a> it perfectly works in all the browsers.. i think that the problem is in defining the values of the functions, the FF just doesnt understand them... btw, the system is Workcube and it uses the Cold Fusion.

  Read the article

• Global Temporary Table "On commit delete rows" functionality discrepancy.

  - by TomatoSandwich

  I have a global temporary table. I called my GTT, for that was it's initials. My GTT never hurt anyone, and did everything I bade of it. I asked my GTT to delete rows on commit. This is a valid function in the creation script of my GTT in oracle. I wanted to be able to have different users see GTT with their own data, and not the data of other people's sessions. 'Delete rows on commit' worked perfectly in our test environment. GTT and I were happy. But then, I deployed GTT as part of an update to functionality to a client's database. The database doesn't like to play well with GTT. GTT called me up all upset and worried, because it wasn't holding any data any more, and didn't know why. GTT told me that if someone did: insert into my_GTT (description) values ('Happy happy joy joy') he would sing-song back: 1 row inserted. However, if the same person tried select * from my_GTT; GTT didn't know what to do, and he replied 0 rows returned. GTT was upset that he didn't know what his playmate had inserted. Please, Stackoverflow, why would GTT forget what was placed into him? He can remember perfectly well at home, but out in the cold harsh world, he just gets so scared. :(

  Read the article

< Previous Page | 7 8 9 10 11 12 13 14  | Next Page >