Search Results

Search found 2230 results on 90 pages for 'gateway'.

Page 11/90 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

• C# HttpWebResponse Error 502 Bad Gateway

  - by Sten Koning

  So i'm using this class to POST on a webpage. The server i'm trying to POST to gives me a 502 Bad Gateway error. I think it has something to do with the user agent. I've already added my firefox user agent to the request but it seems to lose it on the response. I've tried using google and found some other articles on this like this one: Error 502 (Bad Gateway) when sending a request with HttpWebRequest over SSL but I don't know how to fix it since im not that good at c#. Greetings, Sten.

  Read the article

• Default IPv6 route on debian squeeze does not come up after boot

  - by Georg Bretschneider

  I have a problem with my default IPv6 route not coming up after boot on a Debian Squeeze system. This is my config (/etc/network/interfaces): # Loopback device: auto lo iface lo inet loopback iface lo inet6 loopback # device: br0 auto br0 iface br0 inet static bridge_ports eth0 bridge_fd 0 address 88.198.62.xx broadcast 88.198.62.63 netmask 255.255.255.224 gateway 88.198.62.33 up route add -net 88.198.62.32 netmask 255.255.255.224 gw 88.198.62.33 br0 iface br0 inet6 static address 2a01:4f8:131:10x::2 netmask 64 gateway 2a01:4f8:131:100::1 up route -A inet6 add 2a01:4f8:131:100::1/59 dev br0 My inet comes up alright, but I have to exec the route command manually after boot to make IPv6 work. Otherwise I can't even reach my gateway. This is the output of ip -6 route show after boot: 2a01:4f8:131:10x::/64 dev br0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 unreachable fe80::/64 dev lo proto kernel metric 256 error -101 mtu 16436 advmss 16376 hoplimit 4294967295 fe80::/64 dev br0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 I already tried it with: up ip -6 route add 2a01:4f8:131:100::1 dev br0 up ip -6 route add default via 2a01:4f8:131:100::1 dev br0 in /etc/network/interfaces, but with the same results. If I execute those commands manually on my shell, everything starts working nicely. And yes, I tried with post-up instead of up, too. Only other changes I made was to activate ip forwarding for IPv6, because I want to run some LXC containers on that system.

  Read the article

• Two DHCP interfaces asigned to two default gateways to OS

  - by user140600

  I have a Ubuntu box that has two networking interfaces (eth0 and wlan0). They are both configured for DHCP in /etc/network/interfaces, but they both assign a default gateway: /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto wlan0 iface wlan0 inet dhcp wireless-essid test Result of route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 172.16.1.1 0.0.0.0 UG 100 0 0 wlan0 0.0.0.0 10.0.0.1 0.0.0.0 UG 100 0 0 eth0 10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 172.16.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 How can I set up /etc/network/interfaces to have only one default gateway, on the interface I want? Worst case scenario, how can I at least control which one gets on top on the route -n command, each boot? Note: This box will travel a lot, and will be connected to different networks, so I don´t know in advance the IP addresses/ranges it will have. Sometimes the default gw interface will be eth0. Sometimes it will be wlan0 ... So, this needs to be kind of automatic ...

  Read the article

• How to integrate cardinalcommerce authentication processing in a flash and Asp.net project?

  - by Krishnan

  Our Asp.net//Flash team doing a shopping cart project. We are integrating First Data Alternative payment gateway. Shopping cart items are selected through flash and our asp.net team taking the data from flash and integrating the first data alternative payment. We have already integrated first data payment gateway. Now we want to integrate First Data Alternative payment gateway. Please help our team to do so

  Read the article

• What are some reputable merchant account providers for high risk payment web sites?

  - by GregH

  I am helping to set up an online cigar web site. However, it has become a real pain to take payments online since tobacco is considered a "high-risk" item and nobody will provide a merchant account to process the payments. It looks like there are companies that specialize in high-risk merchant accounts. I was wondering if anybody could recommend a high-risk merchant account and payment processing provider?

  Read the article

• What payment gateways fit my website?

  - by Amr ElGarhy

  I am building an image hosting website and users will pay for extra storage, this means that for example: each 1GB over the first 3GB, I will charge the user for some money per GB. I want to integrate in my website a payment way so that I can let the users pay through and also let me to collect these money later either getting them through ATM or to get it in my bank account. I can't user paypal because it is not working in my country Egypt. Can you advice me with a service and some tips about how users will pay and how I will get the money from.

  Read the article

• Subscription based eCommerce Site selling Physical Goods

  - by Kash

  I want to implement a system where customers can buy physical products as subscription with recurring billing. Customers will come to my site, visit product page and buy stuff. They need to register an account before purchasing. After registration they will be forwarded to payment processor for payment and after successful payment they will be returned back to my site. Requirement: I dont want to use Paypal as a payment processor. It will be recurring payment on monthly, quarterly, bi-annual or annual basis. Customers can login to my site in order to view their Order History, Profile Management and can edit their Billing and/or Shipping details. Customers can cancel their Subscription any time after login to their account on my site. Plan: Currently I am using wordpress with WooCommerce plugin for eCommerce functionality. I am planning to use Amazon as a payment processor. I have searched WooCommerce Extension Drectory and found WC Subscription extension that can be used for my site. But I just confirmed from the Support WC Subscription only support recurring payment with Paypal and Stripe, no other payment processor is supported at the moment. Questions: According to my need, what will be the best solution? I am open to switch the platform from Wordpress to something else that can fulfill my requirement.

  Read the article

• Automated Post-billing Service/Solution

  - by geoffreak

  I'm trying to find a solution or service that will allow for my company to automatically take a customer's credit card information via the web to keep on file and bill against based on how much they have used the services we provide. We need a service that will also handle the payment processing as well. Note that this is not recurring billing. The bill at the end of each month won't be the same. Presently, we are having to take a customer's credit card information over the phone and manually input it into Quickbooks, but this just doesn't work for scalability. We will still be manually invoicing the customers, but we need automated credit card acceptance and storage without the liabilities involved with storing it on our own server. Solutions that integrate with Wordpress would be a plus.

  Read the article

• PHP framework suggestions

  - by user1104791

  I'm going to be creating a site for a business with the following: Single Item purchases with Paypal, Google Checkout and Amazon Checkout Digital Downloads for members from a CDN Forum Voting on different items While that seems rather simple having to deal with the three different payment gateways is a big pain in the ass. Django has a great payment library which works for all three but I'm not able to find one for any of the PHP frameworks. Anyone have any suggestions? I'm posting here as suggested by someone at Stackoverflow.

  Read the article

• Authorize.net CIM or using the module's storage

  - by CQM

  this site is intended to allow users to sign up and pay for a service, they will be able to pay using Paypal and Authorize.net since I am using two different payment gateways, it makes me wonder where I want to keep the user information. Authorize.net offers CIM, but some users will pay with paypal therefore Authorize.net won't have all user's information Would the best solution then be to not use CIM and store everything within my member database module? for the record I am using OSE for Joomla for my subscriber service

  Read the article

• Is it legal to ask photo ID and credit card copy in the U.S

  - by selim

  I regularly order from online shops around the world and I have not see any case where the company asks for photo ID or credit card copy. Yesterday I make an order from linode.com and my order is on hold because of their "fraud check system". Is it common to ask those info in U.S. where I have never asked such info in here (Istanbul, Turkey). And I already asked what is their motive and legal stand and the reason my order is hold by their fraud system. And I also added whether is because I live in Istanbul, Turkey. Their answer was as following: "We would not be able to disclose specific information related to our fraud system." And I'm asked repeatedly whether I want to cancel my order or not. I dont questioning reputation of linode.com if I think so, I did not make an order. I think asking for photo ID is neither legal nor provide any security.

  Read the article

• Looking for a modern payment processor which accepts adult sites

  - by JakeRow123

  I love how easy authorize.net is to use, but they don't accept adult sites. I am lanching an adult site soon but I can't find any good credit card processors I can use. Most sites use CCbill or Epoch but they are both terrible since the customer is redirected to their external site which also has an ancient 1990's look. It's not like authorize.net's API that you can query and get the result back as to whether the payment went through or not. This makes authorize.net blend seamlessly with the product. But since adult sites are against their TOS and also paypals, what is a good alternative? I am looking for one that won't redirect the user from my site, is big enough to be reliable and trustworthy and has fairly low rates. Any help is appreciated!

  Read the article

• Any mobile-friendly Credit Card billing solutions for mobile sites similar to Bango?

  - by Programmer

  Are there any mobile-friendly Credit Card billing solutions for mobile sites similar to Bango? The advantages of Bango I have seen compared to regular Credit Card solutions that make it considerably "mobile-friendly" are: 1) It does not require the user to enter their full name and billing address to make a payment. The user is only required to enter their Credit Card number, expiration date, and CVC code (if they are in the U.S., they will also have to enter their Zip Code). That is significantly less input than is normally required for Credit Card payments, which is a big plus on small mobile key pads. After a user makes an initial Credit Card payment, their details are stored by Bango, and the next time the user needs to make a payment with the same Credit Card, they just have to click a single link and it processes the payment on their stored Credit Card. Needless to say, this is very convenient for mobile users as it is analogous to Direct Carrier Billing as far as the user is concerned since they won't need to input any details. The downside with Bango is that their fees are higher than others, all payments must be processed via their site and branding, there is a high minimum ($1.99) and a low maximum ($30) on how much you can charge users, and you need to pay a monthly fee on top of the high transaction costs. It is due to the downsides mentioned above that I am looking for an alternative solution that also does the advantages 1) and 2) above. Is there anything like that? I looked at JunglePay and they do neither 1) nor 2).

  Read the article

• first data global gateway API - invalid XML problem

  - by B.Georg

  Hello, i am implementing the First Data Global Gateway API into a Java E-Commerce Web application. The problem that i have is that I get an error message SGS-020003: Invalid XML returned from the staging.linkpt.net server. By switching the optional entities off, I managed to locate the problematic entity. It is the Shipping entity. I have the following data inside it: <shipping> <zip>10105</zip> <phone>123456789</phone> <email>[email protected]</email> <name>DJBla</name> <state>NY</state> <address1>some city</address1> <address2>suite 6</address2> <city>New York</city> <country>US</country> </shipping> According to the First Data Global Gateway User Manual Version 1.1 everything is correct with my XML. Would anyone have an idea where the error could be? Kind Regards, B.Georg

  Read the article

• Nginx+Passenger: 502 Bad Gateway from Nginx when passing urlencoded URLs in GET vars

  - by jimeh

  Here's an example of the URLs that don't work: http://domain/do?url=http%3A%2F%2Fwww.linkedin.com%2Fin%2Fperson http://domain/do?url=http%3A%2F%2Fwww.linkedin.com%2F However, the following URL does work: http://domain/do?url=http%3A%2F%2Fwww.linkedin.com Also, this only happens with Nginx, using Passenger with Apache it works fine, but we use Nginx on our production machines. Here's the entry in Nginx's error log: 2009/12/01 09:30:51 [error] 6407#0: *136 upstream prematurely closed connection while reading response header from upstream, client: xxx.xxx.xxx.xxx, server: domain, request: "GET /do?url=http%3A%2F%2Fwww.linkedin.com%2F HTTP/1.1", upstream: "passenger://unix:/tmp/passenger.6335/master/helper_server.sock:", host: "domain"

  Read the article

• Using ClearOS as a gateway/firewall/mailserver

  - by Elzenissimo

  Hi, Just installed ClearOS on a PC to act as our firewall firstly and then to act as an internal mailserver. My question is: Can i create a mailserver that then routes the mail through to our ISP mail server without having to contact the ISP and gain MX records etc..? We are a small business (5 PCs + dataserver) and the reason this is interesting is because we need to keep a record of outgoing mails from certain users, as well as spam and virus filtering.

  Read the article

• I get a 502 bad gateway ONLY with a specific combination of domain/root folders - NGINX

  - by Patrick De Amorim

  I have a VPS running NGINX and virtual hosts, with a configuration such as this: Domains directing to it: lolpics.no smscloud.no idmag.no Root folders: /home/vds/www/lolpics /home/vds/www/smscloud /home/vds/www/idmag SMSCloud.no is the site that keeps getting 502 errors, but if I make the domain direct to any of the other folders, the site works, or if I make any other domain name direct to the /home/vds/www/smscloud folder, it works. Only smscloud.no with /home/vds/www/smscloud breaks I tried putting this between the http{} in my nginx.conf and no help: proxy_buffer_size 128k; proxy_buffers 4 256k; proxy_busy_buffers_size 256k; EDIT: Well, that was slightly silly, if anyone from Google stumbles on this, here's how I fixed it, I just added this to the http{}: fastcgi_buffer_size 16k; fastcgi_buffers 16 16k; So that the start of my http block is: http { include /etc/nginx/mime.types; proxy_buffer_size 128k; proxy_buffers 4 256k; proxy_busy_buffers_size 256k; fastcgi_buffer_size 16k; fastcgi_buffers 16 16k;

  Read the article

• Linux - Only first virtual interface can ping external gateway

  - by husvar

  I created 3 virtual interfaces with different mac addresses all linked to the same physical interface. I see that they successfully arp for the gw and they can ping (the request is coming in the packet capture in wireshark). However the ping utility does not count the responses. Does anyone knows the issue? I am running Ubuntu 14.04 in a VmWare. root@ubuntu:~# ip link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff inet6 fe80::20c:29ff:febc:fc8b/64 scope link valid_lft forever preferred_lft forever root@ubuntu:~# ip route sh root@ubuntu:~# ip link add link eth0 eth0.1 addr 00:00:00:00:00:11 type macvlan root@ubuntu:~# ip link add link eth0 eth0.2 addr 00:00:00:00:00:22 type macvlan root@ubuntu:~# ip link add link eth0 eth0.3 addr 00:00:00:00:00:33 type macvlan root@ubuntu:~# ip -4 link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff 18: eth0.1@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:11 brd ff:ff:ff:ff:ff:ff 19: eth0.2@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:22 brd ff:ff:ff:ff:ff:ff 20: eth0.3@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:33 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip -4 addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever root@ubuntu:~# ip -4 route sh root@ubuntu:~# dhclient -v eth0.1 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.1/00:00:00:00:00:11 Sending on LPF/eth0.1/00:00:00:00:00:11 Sending on Socket/fallback DHCPDISCOVER on eth0.1 to 255.255.255.255 port 67 interval 3 (xid=0x568eac05) DHCPREQUEST of 192.168.1.145 on eth0.1 to 255.255.255.255 port 67 (xid=0x568eac05) DHCPOFFER of 192.168.1.145 from 192.168.1.254 DHCPACK of 192.168.1.145 from 192.168.1.254 bound to 192.168.1.145 -- renewal in 1473 seconds. root@ubuntu:~# dhclient -v eth0.2 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.2/00:00:00:00:00:22 Sending on LPF/eth0.2/00:00:00:00:00:22 Sending on Socket/fallback DHCPDISCOVER on eth0.2 to 255.255.255.255 port 67 interval 3 (xid=0x21e3114e) DHCPREQUEST of 192.168.1.146 on eth0.2 to 255.255.255.255 port 67 (xid=0x21e3114e) DHCPOFFER of 192.168.1.146 from 192.168.1.254 DHCPACK of 192.168.1.146 from 192.168.1.254 bound to 192.168.1.146 -- renewal in 1366 seconds. root@ubuntu:~# dhclient -v eth0.3 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.3/00:00:00:00:00:33 Sending on LPF/eth0.3/00:00:00:00:00:33 Sending on Socket/fallback DHCPDISCOVER on eth0.3 to 255.255.255.255 port 67 interval 3 (xid=0x11dc5f03) DHCPREQUEST of 192.168.1.147 on eth0.3 to 255.255.255.255 port 67 (xid=0x11dc5f03) DHCPOFFER of 192.168.1.147 from 192.168.1.254 DHCPACK of 192.168.1.147 from 192.168.1.254 bound to 192.168.1.147 -- renewal in 1657 seconds. root@ubuntu:~# ip -4 link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff 18: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:11 brd ff:ff:ff:ff:ff:ff 19: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:22 brd ff:ff:ff:ff:ff:ff 20: eth0.3@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:33 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip -4 addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 18: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.145/24 brd 192.168.1.255 scope global eth0.1 valid_lft forever preferred_lft forever 19: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.146/24 brd 192.168.1.255 scope global eth0.2 valid_lft forever preferred_lft forever 20: eth0.3@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.147/24 brd 192.168.1.255 scope global eth0.3 valid_lft forever preferred_lft forever root@ubuntu:~# ip -4 route sh default via 192.168.1.254 dev eth0.1 192.168.1.0/24 dev eth0.1 proto kernel scope link src 192.168.1.145 192.168.1.0/24 dev eth0.2 proto kernel scope link src 192.168.1.146 192.168.1.0/24 dev eth0.3 proto kernel scope link src 192.168.1.147 root@ubuntu:~# arping -c 5 -I eth0.1 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.145 eth0.1 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 6.936ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.986ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 0.654ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 5.137ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.426ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# arping -c 5 -I eth0.2 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.146 eth0.2 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 5.665ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 3.753ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 16.500ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 3.287ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 32.438ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# arping -c 5 -I eth0.3 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.147 eth0.3 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 4.422ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.429ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.321ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 40.423ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.268ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# tcpdump -n -i eth0.1 -v & [1] 5317 root@ubuntu:~# ping -c5 -q -I eth0.1 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.145 eth0.1: 56(84) bytes of data. tcpdump: listening on eth0.1, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:37.612558 IP (tos 0x0, ttl 64, id 2595, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 2, length 64 13:18:37.618864 IP (tos 0x68, ttl 64, id 14493, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 2, length 64 13:18:37.743650 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:38.134997 IP (tos 0x0, ttl 128, id 23547, offset 0, flags [none], proto UDP (17), length 229) 192.168.1.86.138 > 192.168.1.255.138: NBT UDP PACKET(138) 13:18:38.614580 IP (tos 0x0, ttl 64, id 2596, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 3, length 64 13:18:38.793479 IP (tos 0x68, ttl 64, id 14495, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 3, length 64 13:18:39.151282 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:39.615612 IP (tos 0x0, ttl 64, id 2597, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 4, length 64 13:18:39.746981 IP (tos 0x68, ttl 64, id 14496, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 4, length 64 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4008ms rtt min/avg/max/mdev = 2.793/67.810/178.934/73.108 ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 9 packets captured 12 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.1 -v root@ubuntu:~# tcpdump -n -i eth0.2 -v & [1] 5320 root@ubuntu:~# ping -c5 -q -I eth0.2 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.146 eth0.2: 56(84) bytes of data. tcpdump: listening on eth0.2, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:41.536874 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.254 is-at 58:98:35:57:a0:70, length 46 13:18:41.536933 IP (tos 0x0, ttl 64, id 2599, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 1, length 64 13:18:41.539255 IP (tos 0x68, ttl 64, id 14507, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 1, length 64 13:18:42.127715 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:42.511725 IP (tos 0x0, ttl 64, id 2600, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 2, length 64 13:18:42.514385 IP (tos 0x68, ttl 64, id 14527, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 2, length 64 13:18:42.743856 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:43.511727 IP (tos 0x0, ttl 64, id 2601, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 3, length 64 13:18:43.513768 IP (tos 0x68, ttl 64, id 14528, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 3, length 64 13:18:43.637598 IP (tos 0x0, ttl 128, id 23551, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 255.255.255.255.17500: UDP, length 197 13:18:43.641185 IP (tos 0x0, ttl 128, id 23552, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 192.168.1.255.17500: UDP, length 197 13:18:43.641201 IP (tos 0x0, ttl 128, id 23553, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 255.255.255.255.17500: UDP, length 197 13:18:43.743890 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:44.510758 IP (tos 0x0, ttl 64, id 2602, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 4, length 64 13:18:44.512892 IP (tos 0x68, ttl 64, id 14538, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 4, length 64 13:18:45.510794 IP (tos 0x0, ttl 64, id 2603, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 5, length 64 13:18:45.519701 IP (tos 0x68, ttl 64, id 14539, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 5, length 64 13:18:49.287554 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:50.013463 IP (tos 0x0, ttl 255, id 50737, offset 0, flags [DF], proto UDP (17), length 73) 192.168.1.146.5353 > 224.0.0.251.5353: 0 [2q] PTR (QM)? _ipps._tcp.local. PTR (QM)? _ipp._tcp.local. (45) 13:18:50.218874 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:51.129961 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:52.197074 IP6 (hlim 255, next-header UDP (17) payload length: 53) 2001:818:d812:da00:200:ff:fe00:22.5353 > ff02::fb.5353: [udp sum ok] 0 [2q] PTR (QM)? _ipps._tcp.local. PTR (QM)? _ipp._tcp.local. (45) 13:18:54.128240 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 0 received, 100% packet loss, time 4000ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 13:18:54.657731 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:54.743174 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 25 packets captured 26 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.2 -v root@ubuntu:~# tcpdump -n -i eth0.3 icmp & [1] 5324 root@ubuntu:~# ping -c5 -q -I eth0.3 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.147 eth0.3: 56(84) bytes of data. tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0.3, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:56.373434 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 1, length 64 13:18:57.372116 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 2, length 64 13:18:57.381263 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 2, length 64 13:18:58.371141 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 3, length 64 13:18:58.373275 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 3, length 64 13:18:59.371165 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 4, length 64 13:18:59.373259 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 4, length 64 13:19:00.371211 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 5, length 64 13:19:00.373278 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 5, length 64 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 1 received, 80% packet loss, time 4001ms rtt min/avg/max/mdev = 13.666/13.666/13.666/0.000 ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 9 packets captured 10 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.3 icmp root@ubuntu:~# arp -n Address HWtype HWaddress Flags Mask Iface 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.1 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.2 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.3

  Read the article

• VRF Internet Gateway Multiple External IP's 1 Internal IP to AWS

  - by user223903

  Trying to setup VRF for the first time and its not working for me even though I keep reading everything online. IP's are different to real life. I have an Internet connection which I can ping to my router in the current setup below 195.45.73.22 I have a block of ip addresses 195.45.121.0/27 I want to setup multiple VPN's to AWS so need to have multiple external ip's thus the block of IP addresses. I have setup the 2nd and 3rd IP address but can not ping them from external. Any help would be grateful. Bryan ip source-route ! ip vrf Internet rd 1:1 route-target export 1:1 route-target import 1:1 ip vrf AWSSydney1 rd 2:2 route-target export 2:2 route-target import 2:2 route-target import 1:1 ip vrf AWSSydney2 rd 3:3 route-target export 3:3 route-target import 3:3 route-target import 1:1 ip cef no ip domain lookup no ipv6 cef multilink bundle-name authenticated interface FastEthernet0/0 description Vocus Internet no ip address speed 100 full-duplex interface FastEthernet0/0.1 encapsulation dot1Q 1 native ip address 195.45.73.22 255.255.255.252 interface FastEthernet0/0.2 encapsulation dot1Q 2 ip vrf forwarding AWSSydney1 ip address 195.45.121.1 255.255.255.224 interface FastEthernet0/0.3 encapsulation dot1Q 3 ip vrf forwarding AWSSydney2 ip address 195.45.121.2 255.255.255.224 interface FastEthernet0/1 description LAN_SIDE ip address 10.0.0.5 255.255.255.0 speed 100 full-duplex no mop enabled ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 195.45.73.21 ip route vrf Internet 0.0.0.0 0.0.0.0 195.45.73.21

  Read the article

• Restarting nginx with Capistrano results in 502 Bad Gateway

  - by blee

  Here's what cap deploy does: sudo -p 'sudo password: ' -u root /var/rails_apps/fooapp/current/script/process/reaper reaper simply contains /etc/init.d/nginx restart When I run the same command from the shell, I do not get a 502--everything is fine. The nginx error.log is empty. Any thoughts on how to troubleshoot? Thanks in advance for your thoughts.

  Read the article

• What is the purpose of netcat's "-w timeout" option when ssh tunneling?

  - by jrdioko

  I am in the exact same situation as the person who posted another question, I am trying to tunnel ssh connections through a gateway server instead of having to ssh into the gateway and manually ssh again to the destination server from there. I am trying to set up the solution given in the accepted answer there, a ~/.ssh/config that includes: host foo User webby ProxyCommand ssh a nc -w 3 %h %p host a User johndoe However, when I try to ssh foo, my connection stays alive for 3 seconds and then dies with a Write failed: Broken pipe error. Removing the -w 3 option solves the problem. What is the purpose of that -w 3 in the original solution, and why is it causing a Broken pipe error when I use it? What is the harm in omitting it?

  Read the article

• Limiting bandwidth on internal interface on Linux gateway

  - by Jack Scott

  I am responsible for a Linux-based (it runs Debian) branch office router that takes a single high-speed Internet connection (eth2) and turns it into about 20 internal networks, each with a seperate subnet (192.168.1.0/24 to 192.168.20.0/24) and a seperate VLAN (eth0.101 to eth0.120). I am trying to restrict bandwidth on one of the internal subnets that is consistently chewing up more bandwidth than it should. What is the best way to do this? My first try at this was with wondershaper, which I heard about on SuperUser here. Unfortunately, this is useful for exactly the opposite situation that I have... it's useful on the client side, not on the Internet side. My second attempt was using the script found at http://www.topwebhosts.org/tools/traffic-control.php, which I modified so the active part is: tc qdisc add dev eth0.113 root handle 13: htb default 100 tc class add dev eth0.113 parent 13: classid 13:1 htb rate 3mbps tc class add dev eth0.113 parent 13: classid 13:2 htb rate 3mbps tc filter add dev eth0.113 protocol ip parent 13:0 prio 1 u32 match ip dst 192.168.13.0/24 flowid 13:1 tc filter add dev eth0.113 protocol ip parent 13:0 prio 1 u32 match ip src 192.168.13.0/24 flowid 13:2 What I want this to do is restrict the bandwidth on VLAN 113 (subnet 192.168.13.0/24) to 3mbit up and 3mbit down. Unfortunately, it seems to have no effect at all! I'm very inexperienced with the tc command, so any help getting this working would be appreciated.

  Read the article

• Using ClearOS as a gateway/firewall/mailserver

  - by Elzenissimo

  Just installed ClearOS on a PC to act as our firewall firstly and then to act as an internal mailserver. My question is: Can i create a mailserver that then routes the mail through to our ISP mail server without having to contact the ISP and gain MX records etc..? We are a small business (5 PCs + dataserver) and the reason this is interesting is because we need to keep a record of outgoing mails from certain users, as well as spam and virus filtering.

  Read the article

• Linux: multiple network connections - 3G/4G / Wifi / LAN / etc; how can i set a preferred network connection to use?

  - by Alex

  I've been looking at how I can setup a laptop that has multiple network interfaces, but a problem exists if all the connections are active, i.e. 3G, WiFi and LAN are all connected, I would like it to default to LAN. I would like to set "weights" or "priority" to each connection, so that if the LAN is unplugged, it'll default to WiFi - if its in range and working, otherwise, it'll switch and use the 3G dongle; I've been looking around and I can see that the "metric" counter for route isn't being used for recent kernels. I thought that would be able to set the preferred gateway / connections - but according to the man page: man route: OUTPUT Metric The 'distance' to the target (usually counted in hops). It is not used by recent kernels, but may be needed by routing daemons. So I'm confused, are there any scripts / apps / anything that can detect active network connections, and by way of configuration, send my default gateway network traffic through that interface if its active / alive?

  Read the article

• nginx 502 Bad Gateway on every external site

  - by Leandros

  I just installed nginx and followed the guides on the official site, to set it up with php5-fpm, but it just won't work. Not even the default site, without php is working outside of my server. Tried listen = 127.0.0.1:7777 and listen = /var/run/php5-fpm.sock Both don't work. I can access http://localhost with lynx on my server, but not from somewhere else (with external ip obviously). Yes, the php5-fpm deamons are running, yes the port (80 and 7777) is opened. Don't work with php-cgi as well. My config: user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; # gzip_vary on; # gzip_proxied any; # gzip_comp_level 6; # gzip_buffers 16 8k; # gzip_http_version 1.1; # gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; proxy_buffers 16 16k; proxy_buffer_size 32k; fastcgi_buffers 16 16k; fastcgi_buffer_size 32k; fastcgi_connect_timeout 300; fastcgi_send_timeout 300; fastcgi_read_timeout 300; } Server config: (symlinked to sites-enabled) server { server_name skilloverflow.de *.skilloverflow.de; root /var/www/blog.skilloverflow.de/htdocs; index index.php; error_log /var/log/nginx/skilloverflow.error.log; access_log /var/log/nginx/skilloverflow.access.log; location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } location / { # This is cool because no php is touched for static content. # include the "?$args" part so non-default permalinks doesn't break when using query string try_files $uri $uri/ /index.php?$args; } location ~ [^/]\.php(/|$) { fastcgi_split_path_info ^(.+?\.php)(/.*)$; if (!-f $document_root$fastcgi_script_name) { return 404; } fastcgi_pass 127.0.0.1:7777; fastcgi_index index.php; include fastcgi_params; } location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ { expires max; log_not_found off; } # deny access to apache .htaccess files location ~ /\.ht { deny all; } # deny access to apache .htaccess files location ~ /\.ht { deny all; } } PHP Version: 5.4.17-1 nginx version: 1.2.1 Debian 6.0.7 Linux 2.6.32 Edit: Lighttpd is still installed, does that matter? It's not running though. Edit 2: No error or access log is generated. They're all empty.

  Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >