Search Results

Search found 64010 results on 2561 pages for 'google app engine python'.

Page 1123/2561 | < Previous Page | 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130  | Next Page >

  • Cisco ASA 5505: Force NAT before IPsec?

    - by WuckaChucka
    I'm trying to route public-to-public IPs over an IPSec tunnel. However, the src IP is not "interesting" to the Cisco's IPSec engine because it doesn't appear to be getting translated to the outside IP before being evaluated by the Cisco's IPSec engine. From WEST to EAST, my public-to-public IPSec works fine: I can make a request from 192.168.0.5:any to 200.200.200.200:80 because the Vyatta does the NAT translation before the IPSec tunnel inspects the traffic, so the remote-subnet and local-subnet matches (see below). However from EAST to WEST, I see a deny in my Cisco logging buffer for Deny tcp src inside:192.168.1.5/59195 dst outside:100.100.100.100/80 which leads me to believe that the IPSec engine is not matching the encrypt_acl because the address has not been translated yet. Any ideas? WEST (Vyatta): inside: 192.168.0.0/24 inside host: 192.168.0.5/24 outside: 100.100.100.100 IPSec local-subnet: 100.100.100.100/32 IPSec remote-subnet: 200.200.200.200/32 EAST (Cisco): inside: 192.168.1.0/24 inside host: 192.168.1.5/24 (DNAT'ed on port 80 to outside) outside: 200.200.200.200 IPSec local-subnet: 200.200.200.200/32 IPSec remote-subnet: 100.100.100.100/32

    Read the article

  • creating metapackages

    - by olpanis
    got some problems while creating metapackages tried to create a meta package containing forensic toolkits, on ubuntu i even got problems creating an .deb file. dpkg-source: error: can't build with source format '3.0 (quilt)': no orig.tar file found dpkg-buildpackage: error: dpkg-source -b forensics-0.1 gave error exit status 255 later i tried it using debian 5, creating the deb works, but there i got into some problems with Depends debian:/home/matthias/Desktop/meta# dpkg --install *.deb Wähle vormals abgewähltes Paket meta. (Lese Datenbank ... 96897 Dateien und Verzeichnisse sind derzeit installiert.) Entpacke meta (aus meta_0.1-1_i386.deb) ... dpkg: Abhängigkeitsprobleme verhindern Konfiguration von meta: meta hängt ab von python (>= 2.6.6-2); aber: Version von python auf dem System ist 2.5.2-3. dpkg: Fehler beim Bearbeiten von meta (--install): Abhängigkeitsprobleme - lasse es unkonfiguriert Fehler traten auf beim Bearbeiten von: meta the file control looks like this: Source: meta Section: unknown Priority: extra Maintainer: root <[email protected]> Build-Depends: debhelper (>= 7) Standards-Version: 3.7.3 Homepage: <insert the upstream URL, if relevant> Package: meta Architecture: any Depends: python (>= 2.6.6-2) Description: short description forensic toolkits any ideas? kind regards

    Read the article

  • Apache2 Segmentation fault with wsgi_module

    - by a coder
    Apache 2.2.3 is running as an existing web server under RHEL 5. Attempting to set up Trac using wsgi_module. RHEL 5 ships with python 2.4, so in order to use the current version of Trac (1.0) I needed to install it with easy_install-2.6. Trac works with the default mod_python, however users strongly encourage not using this module as it is officially dead. Using RHEL's package manager, I downloaded/installed python26-mod_wsgi.so. I backed up the httpd.conf, then made the following additions: LoadModule wsgi_module modules/python26-mod_wsgi.so #...# WSGIScriptAlias /trac /www/virtualhosts/trac/deploy/cgi-bin/trac.wsgi <Directory /www/virtualhosts/trac/deploy/cgi-bin> WSGIApplicationGroup %{GLOBAL} Order deny,allow Allow from all </Directory> Next I moved trac.conf to trac.conf.bak (contains mod_python calls). I tested the configuration using: apachectl configtest Syntax is OK. So I reloaded the server config using: service httpd reload At this time, all virtualhosted sites stopped responding. I restored my backup copy of httpd.conf, reloaded the server config, and the virtualhosted sites are being served again. A quick look at the httpd error_log shows: [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28282): Initializing Python. [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28280): Attach interpreter ''. [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1817): proxy: grabbed scoreboard slot 0 in child 28283 for worker proxy:reverse [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1836): proxy: worker proxy:reverse already initialized [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1930): proxy: initialized single connection worker 0 in child 28283 for (*) [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28283): Initializing Python. [Mon Oct 08 10:20:04 2012] [notice] child pid 28249 exit signal Segmentation fault (11) [Mon Oct 08 10:20:04 2012] [notice] child pid 28250 exit signal Segmentation fault (11) [Mon Oct 08 10:20:04 2012] [notice] child pid 28251 exit signal Segmentation fault (11) There are many similar lines, this is just a snip of the log file. Suggestions on what could be going on to cause the Segmentation faults?

    Read the article

  • cfengine3 file_copy only on source side change

    - by megamic
    I am using the 'digest' copy method for all file copy promises, because of the way we package and deploy software, I cant rely on mtime for the criteria for updating files. For various reasons, I am not employing the client-server approach with a central configuration server: rather we package and deploy our entire configuration module to each server, so from cf-engine's perspective, the source and target are local on the server it is running. The problem I am having with this approach is that the source will always update the target when they differ - which is what I want most of the time, usually because the source has been updated. However, like many other cfengine users, we are running an operational environment, where occasionally emergency fixes have to be applied immediately - meaning we don't have time to rebuild and redeploy a configuration module, and the fix will often be applied by deploying a tarball with specific changes. Of course this is problematic if cf-engine comes along 5 mintues later and reverts the changes. What we would like is to be able to make small, incremental changes to our servers, without them being reverted, until the next deployment cycle at which time the new source files would be copied. We do not consider random file corruption or mistaken changes to involve enough risk to warrant having cfengine constantly revert deployments to their source copy - the ability to deploy emergency fixes and have them stay that way until the next deployment would be of much greater value and utility. So, after all that, my question is this: is cf-engine capable of detecting whether it was the source or target that changed when the files differ, and if so, is their a way to use the 'digest' copy method but only if the source side changed? I am very open to other ideas and approaches as-well, as I am still quite new to this whole configuration management thing.

    Read the article

  • How to start using twill?

    - by brilliant
    How do I start using twill? I have just downloaded it, unpacked it and clicked on the setup .py file in the folder. The black window (terminal) appeared for a moment and vanished. (I do have Python 2.5 installed on my computer - along with SDK from Google App Engine) In the twill documentation section it says: Downloading twill The latest release of twill is twill 0.9, released Thursday, December 27th, 2007; it is available for download at http://darcs.idyll.org/~t/projects/twill-0.9.tar.gz. You can also use Python's easy_install to install or upgrade twill. twill works with Python 2.3 or later. To start using twill, install it and then type twill-sh. At the prompt type: go http://www.slashdot.org/ show showforms showhistory I am not clear from this passage what I am supposed to type (only "twill-sh" or "twill-sh" and all the words under that line) and where (I tried typing it in the command prompt window of my computer - to no avail) Can, anyone, please, help me out here? Thank You in advance.

    Read the article

  • Updating PHP on Linux - "No Packages marked for Update"?

    - by Aristotle
    I'm very new to server-administration, but I was thinking the task of updating PHP to 5.2+ should be relatively simple. Online I found that the following was allegedly sufficient to do this: yum update php But when I run this, the following is output: [root@ip-XXX-XXX-XXX-XXX /]# php -v PHP 5.1.6 (cli) (built: Jan 13 2010 17:13:05) Copyright (c) 1997-2006 The PHP Group Zend Engine v2.1.0, Copyright (c) 1998-2006 Zend Technologies [root@ip-XXX-XXX-XXX-XXX /]# yum update php Loaded plugins: fastestmirror Determining fastest mirrors * addons: p3plmirror02.prod.phx3.secureserver.net * base: p3plmirror02.prod.phx3.secureserver.net * extras: p3plmirror02.prod.phx3.secureserver.net * turbopanel-base: p3plmirror02.prod.phx3.secureserver.net * turbopanel-centos5: p3plmirror02.prod.phx3.secureserver.net * update: p3plmirror02.prod.phx3.secureserver.net addons | 951 B 00:00 addons/primary | 201 B 00:00 base | 2.1 kB 00:00 base/primary_db | 1.6 MB 00:00 extras | 1.1 kB 00:00 extras/primary | 107 kB 00:00 extras 325/325 turbopanel-base | 951 B 00:00 turbopanel-base/primary | 72 kB 00:00 turbopanel-base 494/494 turbopanel-centos5 | 951 B 00:00 turbopanel-centos5/primary | 2.1 kB 00:00 turbopanel-centos5 8/8 update | 1.9 kB 00:00 update/primary_db | 463 kB 00:00 Setting up Update Process No Packages marked for Update [root@ip-XXX-XXX-XXX-XXX /]# php -v PHP 5.1.6 (cli) (built: Jan 13 2010 17:13:05) Copyright (c) 1997-2006 The PHP Group Zend Engine v2.1.0, Copyright (c) 1998-2006 Zend Technolog [root@ip-XXX-XXX-XXX-XXX /]# No Packages marked for Update [root@ip-XXX-XXX-XXX-XXX /]# php -v bash: No: command not found [root@ip-XXX-XXX-XXX-XXX /]# [root@ip-XXX-XXX-XXX-XXX /]# php -v bash: [root@ip-XXX-XXX-XXX-XXX: command not found [root@ip-XXX-XXX-XXX-XXX /]# PHP 5.1.6 (cli) (built: Jan 13 2010 17:13:05) bash: syntax error near unexpected token `(' [root@ip-XXX-XXX-XXX-XXX /]# Copyright (c) 1997-2006 The PHP Group bash: syntax error near unexpected token `c' [root@ip-XXX-XXX-XXX-XXX /]# Zend Engine v2.1.0, Copyright (c) 1998-2006 Zend Technologies bash: syntax error near unexpected token `(' [root@ip-XXX-XXX-XXX-XXX /]# My PHP version is 5.1.6 before, and after running the command. Am I being too naive here with this update process? Is there a more verbose route that is necessary for me to take?

    Read the article

  • Django apache + mod_wsgi with virtualenv

    - by ArgsKwargs
    I have some questions running multiple Django sites on a VPS I have a server that uses openPanel to automatically create VirtualHosts within apache2. My ideal situation is that I would have multiple virtualenvs with different dependencies installed so the python dist-packages directory isn't contaminated for different Django sites. For example: /home/user/virtualenv1 /home/user/virtualenv2 My django applications reside at /var/www, so For example: /var/www/djangosite1 /var/www/djangosite2 Now I've read upon openPanel docs and figured out the best thing todo is create a django.conf file inside the mydomain.com.inc folder, which looks something like: /etc/apache2/openpanel.d/mydomain.com.inc/django.conf DocumentRoot /var/www/djangosite1/project WSGIScriptAlias / /var/www/djangosite1/project/wsgi.py WSGIDaemonProcess mydomain python-path=/home/user/virtualenv1/lib/python2.6/site-packages <Directory /var/www/djangosite1/project> Order allow,deny Allow from all </Directory> Alias /static /var/www/djangosite1/project/static-root Now my problem is that this setup seems unable to find the virtualenv site-packages thus not recognizing any dependencies available in the given virtualenv Also, commenting out this line doesn't seem to break or change a thing: WSGIDaemonProcess mydomain python-path=/home/user/virtualenv1/lib/python2.6/site-packages For example: > service apache2 start ImportError: No module named South When I install South outside the virtualenv everything works

    Read the article

  • Trying to install datastax opscenter - Failed to load application: cannot import name _parse

    - by gansbrest
    I'm not familiar with python, maybe someone could explain what's going on here? ec2-user@prod-opscenter-01:~ % java -version java version "1.7.0_45" Java(TM) SE Runtime Environment (build 1.7.0_45-b18) Java HotSpot(TM) 64-Bit Server VM (build 24.45-b08, mixed mode) ec2-user@prod-opscenter-01:~ % python -V Python 2.6.8 ec2-user@prod-opscenter-01:~ % openssl version OpenSSL 1.0.1e-fips 11 Feb 2013 And now the error ec2-user@prod-opscenter-01:~ % sudo /etc/init.d/opscenterd start Starting Cassandra cluster manager opscenterd Starting opscenterdUnhandled Error Traceback (most recent call last): File "/usr/lib64/python2.6/site-packages/twisted/application/app.py", line 652, in run runApp(config) File "/usr/lib64/python2.6/site-packages/twisted/scripts/twistd.py", line 23, in runApp _SomeApplicationRunner(config).run() File "/usr/lib64/python2.6/site-packages/twisted/application/app.py", line 386, in run self.application = self.createOrGetApplication() File "/usr/lib64/python2.6/site-packages/twisted/application/app.py", line 451, in createOrGetApplication application = getApplication(self.config, passphrase) --- <exception caught here> --- File "/usr/lib64/python2.6/site-packages/twisted/application/app.py", line 462, in getApplication application = service.loadApplication(filename, style, passphrase) File "/usr/lib64/python2.6/site-packages/twisted/application/service.py", line 405, in loadApplication application = sob.loadValueFromFile(filename, 'application', passphrase) File "/usr/lib64/python2.6/site-packages/twisted/persisted/sob.py", line 210, in loadValueFromFile exec fileObj in d, d File "bin/start_opscenter.py", line 1, in <module> from opscenterd import opscenterd_tap File "/usr/lib/python2.6/site-packages/opscenterd/opscenterd_tap.py", line 37, in <module> File "/usr/lib/python2.6/site-packages/opscenterd/OpsCenterdService.py", line 13, in <module> File "/usr/lib/python2.6/site-packages/opscenterd/ClusterServices.py", line 22, in <module> File "/usr/lib/python2.6/site-packages/opscenterd/WebServer.py", line 40, in <module> File "/usr/lib/python2.6/site-packages/opscenterd/Agents.py", line 18, in <module> exceptions.ImportError: cannot import name _parse Failed to load application: cannot import name _parse Maybe there are open source alternatives to monitoring cassandra I should look at? Thanks a lot

    Read the article

  • Nagios send mail when server is down

    - by tzulberti
    I am using nagios 3.06 to monitor the servers. When a service is critical, it sends a mail, but when a server is down no mail is sent. Even if all the services go to critical state, no mail is sent. I have the following configuration: define command {     command_name notify-host-by-email     command_line python /etc/nagios3/send_mail.py "[Nagios] $HOSTNAME$" "******** Nagios ****\n\n Host: $HOSTNAME$\n Description: the server is down" } define command{     command_name notify-service-by-email     command_line python /etc/nagios3/send_mail.py "[Nagios] $HOSTNAME$: $SERVICEDESC$ ($NOTIFICATIONTYPE$)" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\nDate/Time: $LONGDATETIME$\nAdditional Info:$SERVICEOUTPUT$" } The python script is a script to sent a mail. It works if I execute it from the command line, but it doesn't sents an email from nagios. What I am doing wrong? UPDATE: The contact data is: define contact{     contact_name root     alias Root     service_notification_period 24x7     host_notification_period 24x7     service_notification_options w,u,c,r     host_notification_options d,r     service_notification_commands notify-service-by-email     host_notification_commands notify-host-by-email     email [email protected] } define contactgroup{     contactgroup_name admins     alias Nagios Administrators     members root }

    Read the article

  • Faking a Linux environment without chroot

    - by Pascal
    For a university project I want to test a C++11 program on a 32-core machine. Unfortunately the machine has Ubuntu 12.04 with GCC 4.6 installed (we need GCC 4.7 because of some C++11 threading features). In such an environment I would normally run a chroot with a custom linux (say a debootstrap with Ubuntu 12.10). Since we don't get root access on the machine we can't use chroot. So far I have prepared a run-time environment using debootstrap for our code, I compiled it in the debootstrap environemnt. Then copied it onto the server (using rsync). In order to run our C++ code I set the LD_LIBRARY_PATH to export LD_LIBRARY_PATH=~/debootstrap/usr/lib/:~/debootstrap/lib64/:~/debootstrap/usr/lib/x86_64-linux-gnu/:~/debootstrap/lib/x86_64-linux-gnu/:$LD_LIBRARY_PATH and so far our code seems to run. I'm however stuck with our python code. It doesn't seem to be sufficient to set the paths manually. export PYTHONPATH=~/debootstrap/usr/lib/python2.7/dist-packages:~/debootstrap/usr/lib/python2.7:~/debootstrap/usr/lib/python2.7/plat-linux2:~/debootstrap/usr/lib/python2.7/lib-tk:~/debootstrap/usr/lib/python2.7/lib-dynload:~/debootstrap/usr/local/lib/python2.7/dist-packages:~/debootstrap/usr/lib/pymodules/python2.7:~/debootstrap/usr/lib/python2.7/dist-packages/PIL:~/debootstrap/usr/lib/python2.7/dist-packages/gtk-2.0:~/debootstrap/usr/lib/python2.7 Executing our script results in ImportError: No module named _path Is there an easier way to accomplish a "fake"-chroot than just overriding and creating environment variables? Note I need python since we created a custom C++-Python module in order to run our tests. Maybe I should create two questions from this.

    Read the article

  • Configuring MySQL for Power Failure

    - by Farrukh Arshad
    I have absolutely no experience with databases and MySql. Now the problem is I have an embedded device running a MySQL database with a web based application. The problem is when I shutdown my embedded device it just cut off the power, and I can not have a controlled shutdown. Given this situation how can I configure MySql to prevent it from failures and in case of a failure, I should have maximum support to recover my database. While searching this, I came across InnoDB Engine as well as some configuration options to set like sync_binlog=1 & innodb_flush_log_at_trx_commit=1. I have noticed my default Engine is InnoDB and binary logs are also enabled. What are other configurations to make for best possible failure & recovery support. Updated: I will be using InnoDB engine which supports Transactions. My question is how best I can configure it (InnoDB + MySQL) so that it can provide best possible fail-safe as well as crash recovery mechanism. One configuration option I came across is to enable binary logging which InnoDB uses at the time of recovery. Regards, Farrukh Arshad

    Read the article

  • Fedora 14 update probelem

    - by Marko
    How is everybody doin? :) Im having this problem with Fedora 14 update for last couple of weeks.. when I run yum update I get the following result: Running rpm_check_debug ERROR with rpm_check_debug vs depsolve: kernel-uname-r = 2.6.32.10-90.fc12.i686.PAE is needed by (installed) kmod-nvidia-2.6.32.10-90.fc12.i686.PAE-1:195.36.15-1.fc12.1.i686 kernel-uname-r = 2.6.32.16-150.fc12.i686.PAE is needed by (installed) kmod-nvidia-2.6.32.16-150.fc12.i686.PAE-1:195.36.31-1.fc12.2.i686 kernel-uname-r = 2.6.32.21-168.fc12.i686.PAE is needed by (installed) kmod-nvidia-2.6.32.21-168.fc12.i686.PAE-1:195.36.31-1.fc12.5.i686 kernel-uname-r = 2.6.32.10-90.fc12.i686.PAE is needed by (installed) kmod-nvidia-2.6.32.10-90.fc12.i686.PAE-1:195.36.15-1.fc12.1.i686 kernel-uname-r = 2.6.32.16-150.fc12.i686.PAE is needed by (installed) kmod-nvidia-2.6.32.16-150.fc12.i686.PAE-1:195.36.31-1.fc12.2.i686 kernel-uname-r = 2.6.32.21-168.fc12.i686.PAE is needed by (installed) kmod-nvidia-2.6.32.21-168.fc12.i686.PAE-1:195.36.31-1.fc12.5.i686 Please report this error in http://yum.baseurl.org/report ** Found 9 pre-existing rpmdb problem(s), 'yum check' output follows: VirtualBox-3.2-3.2.10_66523_fedora13-1.i686 has missing requires of libpython2.6.so.1.0 VirtualBox-3.2-3.2.10_66523_fedora13-1.i686 has missing requires of python(abi) = ('0', '2.6', None) 1:kmod-nvidia-2.6.32.10-90.fc12.i686.PAE-195.36.15-1.fc12.1.i686 has missing requires of kernel-uname-r = ('0', '2.6.32.10', '90.fc12.i686.PAE') 1:kmod-nvidia-2.6.32.16-150.fc12.i686.PAE-195.36.31-1.fc12.2.i686 has missing requires of kernel-uname-r = ('0', '2.6.32.16', '150.fc12.i686.PAE') 1:kmod-nvidia-2.6.32.21-168.fc12.i686.PAE-195.36.31-1.fc12.5.i686 has missing requires of kernel-uname-r = ('0', '2.6.32.21', '168.fc12.i686.PAE') mysql-workbench-gpl-5.2.28-1fc13.i386 has missing requires of libpython2.6.so.1.0 pysvn-1.7.2-1.fc13.i686 has missing requires of python(abi) = ('0', '2.6', None) system-config-display-2.2-1.fc12.i686 has missing requires of libpython2.6.so.1.0 system-config-display-2.2-1.fc12.i686 has missing requires of python(abi) = ('0', '2.6', None) does anybody have a similar issue?

    Read the article

  • Upgrade of Ubuntu 8.10 distribution fails due to missing packages

    - by Tim
    I have a server that I've forgotten to upgrade for ages, which is still running Intrepid (8.10). I'd like to upgrade it to a newer version of the distribution, so that I can get security patches etc. I found some instructions that tell me to install the package update-manager-core. I tried the following: $ sudo apt-get install update-manager-core but this fails since some of the necessary packages can't be found: ... Err http://archive.ubuntu.com intrepid/main python-apt 0.7.7.1ubuntu4 404 Not Found [IP: 91.189.88.40 80] Err http://archive.ubuntu.com intrepid-updates/main update-manager-core 1:0.93.34 404 Not Found [IP: 91.189.88.40 80] Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/p/python-apt/python-apt_0.7.7.1ubuntu4_amd64.deb 404 Not Found [IP: 91.189.88.40 80] Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/u/update-manager/update-manager-core_0.93.34_amd64.deb 404 Not Found [IP: 91.189.88.40 80] ... I know that Intrepid is no longer supported, and so I guess some of the necessary files may no longer be maintained. But this seems rather unhelpful: I can't upgrade because it's too old, and the only way to fix this would be to upgrade it. Is there a way round this? Is something else wrong?

    Read the article

  • Nagios send mail when server is down

    - by tzulberti
    I am using nagios 3.06 to monitor the servers. When a service is critical, it sends a mail, but when a server is down no mail is sent. Even if all the services go to critical state, no mail is sent. I have the following configuration: define command {     command_name notify-host-by-email     command_line python /etc/nagios3/send_mail.py "[Nagios] $HOSTNAME$" "******** Nagios ****\n\n Host: $HOSTNAME$\n Description: the server is down" } define command{     command_name notify-service-by-email     command_line python /etc/nagios3/send_mail.py "[Nagios] $HOSTNAME$: $SERVICEDESC$ ($NOTIFICATIONTYPE$)" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\nDate/Time: $LONGDATETIME$\nAdditional Info:$SERVICEOUTPUT$" } The python script is a script to sent a mail. It works if I execute it from the command line, but it doesn't sents an email from nagios. What I am doing wrong? UPDATE: The contact data is: define contact{     contact_name root     alias Root     service_notification_period 24x7     host_notification_period 24x7     service_notification_options w,u,c,r     host_notification_options d,r     service_notification_commands notify-service-by-email     host_notification_commands notify-host-by-email     email [email protected] } define contactgroup{     contactgroup_name admins     alias Nagios Administrators     members root }

    Read the article

  • Protecting Apache with Fail2Ban

    - by NetStudent
    Having checked my Apache logs for the last two days I have noticed several attempts to access URLs such as /phpmyadmin, /phpldapadmin: 121.14.241.135 - - [09/Jun/2012:04:37:35 +0100] "GET /w00tw00t.at.blackhats.romanian.anti-sec:) HTTP/1.1" 404 415 "-" "ZmEu" 121.14.241.135 - - [09/Jun/2012:04:37:35 +0100] "GET /phpMyAdmin/scripts/setup.php HTTP/1.1" 404 405 "-" "ZmEu" 121.14.241.135 - - [09/Jun/2012:04:37:35 +0100] "GET /phpmyadmin/scripts/setup.php HTTP/1.1" 404 404 "-" "ZmEu" 121.14.241.135 - - [09/Jun/2012:04:37:36 +0100] "GET /pma/scripts/setup.php HTTP/1.1" 404 399 "-" "ZmEu" 121.14.241.135 - - [09/Jun/2012:04:37:36 +0100] "GET /myadmin/scripts/setup.php HTTP/1.1" 404 403 "-" "ZmEu" 121.14.241.135 - - [09/Jun/2012:04:37:37 +0100] "GET /MyAdmin/scripts/setup.php HTTP/1.1" 404 403 "-" "ZmEu" 66.249.72.235 - - [09/Jun/2012:07:11:06 +0100] "GET /robots.txt HTTP/1.1" 404 430 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" 66.249.72.235 - - [09/Jun/2012:07:11:06 +0100] "GET / HTTP/1.1" 200 424 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" 188.132.178.34 - - [09/Jun/2012:08:39:05 +0100] "HEAD /manager/html HTTP/1.0" 404 166 "-" "-" 95.108.150.235 - - [09/Jun/2012:09:42:09 +0100] "GET /robots.txt HTTP/1.1" 404 432 "-" "Mozilla/5.0 (compatible; YandexBot/3.0; +http://yandex.com/bots)" 95.108.150.235 - - [09/Jun/2012:09:42:09 +0100] "GET /robots.txt HTTP/1.1" 404 432 "-" "Mozilla/5.0 (compatible; YandexBot/3.0; +http://yandex.com/bots)" 95.108.150.235 - - [09/Jun/2012:09:42:10 +0100] "GET / HTTP/1.1" 200 424 "-" "Mozilla/5.0 (compatible; YandexBot/3.0; +http://yandex.com/bots)" 95.108.150.235 - - [09/Jun/2012:09:42:10 +0100] "GET / HTTP/1.1" 200 424 "-" "Mozilla/5.0 (compatible; YandexBot/3.0; +http://yandex.com/bots)" 95.108.150.235 - - [09/Jun/2012:09:42:11 +0100] "GET / HTTP/1.1" 200 424 "-" "Mozilla/5.0 (compatible; YandexBot/3.0; +http://yandex.com/bots)" 95.108.150.235 - - [09/Jun/2012:09:42:11 +0100] "GET / HTTP/1.1" 200 424 "-" "Mozilla/5.0 (compatible; YandexBot/3.0; +http://yandex.com/bots)" 194.128.132.2 - - [09/Jun/2012:16:04:41 +0100] "HEAD / HTTP/1.0" 200 260 "-" "-" 66.249.68.176 - - [09/Jun/2012:18:08:12 +0100] "GET /robots.txt HTTP/1.1" 404 430 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" 66.249.68.176 - - [09/Jun/2012:18:08:13 +0100] "GET / HTTP/1.1" 200 424 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" 212.3.106.249 - - [09/Jun/2012:18:12:33 +0100] "GET / HTTP/1.1" 200 388 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:34 +0100] "GET /phpldapadmin/ HTTP/1.1" 404 379 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:34 +0100] "GET /phpldapadmin/htdocs/ HTTP/1.1" 404 386 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:35 +0100] "GET /phpldap/ HTTP/1.1" 404 374 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:36 +0100] "GET /phpldap/htdocs/ HTTP/1.1" 404 381 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:36 +0100] "GET /admin/ HTTP/1.1" 404 372 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:38 +0100] "GET /admin/ldap/ HTTP/1.1" 404 377 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:38 +0100] "GET /admin/ldap/htdocs/ HTTP/1.1" 404 384 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:38 +0100] "GET /admin/phpldap/ HTTP/1.1" 404 380 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:39 +0100] "GET /admin/phpldap/htdocs/ HTTP/1.1" 404 387 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:39 +0100] "GET /admin/phpldapadmin/htdocs/ HTTP/1.1" 404 392 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:40 +0100] "GET /admin/phpldapadmin/ HTTP/1.1" 404 385 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:40 +0100] "GET /openldap HTTP/1.1" 404 374 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:41 +0100] "GET /openldap/htdocs HTTP/1.1" 404 381 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:42 +0100] "GET /openldap/htdocs/ HTTP/1.1" 404 382 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:44 +0100] "GET /ldap/ HTTP/1.1" 404 371 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:44 +0100] "GET /ldap/htdocs/ HTTP/1.1" 404 378 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:45 +0100] "GET /ldap/phpldapadmin/ HTTP/1.1" 404 384 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:46 +0100] "GET /ldap/phpldapadmin/htdocs/ HTTP/1.1" 404 391 "-" "-" Is there any way I can use Fail2Ban or any other similar software to ban these IPs in situations when my server is being abused this way (by trying several "common" URLs)?

    Read the article

  • How did my email end up in spam? Spam only filters this specific email, other email contents work

    - by mugetsu
    My website has users buy our products and when the purchase completes, it sends the user an email. However, this email always ends up in spam! When the user first registers, the site also sends an email, this email however is not filtered and goes into the normal inbox. I'm not quite sure why this is so, gmail vaguely tells me that " It's similar to messages that were detected by our spam filters." So I'm thinking that I need to reword the following email better. Can I get some tips? Or could something else be causing this? thanks! here's the unformatted email: Delivered-To: [email protected] Received: by 10.112.32.98 with SMTP id h2csp61953lbi; Tue, 20 Mar 2012 21:09:13 -0700 (PDT) Received: by 10.180.79.72 with SMTP id h8mr22836827wix.1.1332302953175; Tue, 20 Mar 2012 21:09:13 -0700 (PDT) Return-Path: <[email protected]> Received: from mail26.elasticemail.org (mail26.elasticemail.org. [178.32.180.26]) by mx.google.com with SMTP id 6si518487wiz.41.2012.03.20.21.09.12; Tue, 20 Mar 2012 21:09:12 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 178.32.180.26 as permitted sender) client-ip=178.32.180.26; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 178.32.180.26 as permitted sender) [email protected]; dkim=pass [email protected] DKIM-Signature: v=1; a=rsa-sha1; bh=qjc8jxQuGy9pLN1YV9TR2PHQYKg=; c=relaxed/relaxed; d=website.com; s=api; h=DomainKey-Signature:MIME-Version:From:To:List-Unsubscribe:Subject:Date:Reply-To:Message-ID:Content-Type; b=Odt+nYhjntXPl7JPVHeJWjkStemt6so+FPVYY6oMKziMFzmW8YiLhN8WwSLY0faMcn/rirKsO2dOm/kvcHlqUJC7ldhaydE6bPekkBDa9kBovlGwPNm6xy9QWPP9I1fXDLDCwqqeAXv8kN0daXbh3pVyqWNUOk5cgQ35OgpQpKI= DomainKey-Signature: q=dns; a=rsa-sha1; c=simple; d=website.com; s=api; h=MIME-Version:X-Mailer:From:To:X-Priority:List-Unsubscribe:Subject:Date:Reply-To:Message-ID:Content-Type; b=F7NNZIEyEV+64uYD8pVpe91WLP19Tw2Whk4OKpkLeAfkmrNIA7AjP0XYU1JWTlEyibHQJjjbhR62I3MvVJBSGp75eWfOuwb2AqYWZ/jAlMWznnfQLVv7OlYJsErGxYP6GUNNcuJaqlTPFDanJwtaEvR+tqXZRB7xrUisMd8lq2I= MIME-Version: 1.0 X-Mailer: email.website.com From: "Website Contact" <[email protected]> To: [email protected] X-Priority: 3 (Normal) List-Unsubscribe: <http://email.website.com/tracking/unsubscribe?msgid=su6g-8kfd0s0g>, <mailto:[email protected]?subject=unsubscribe> Subject: Website Tickets: event Date: Wed, 21 Mar 2012 04:09:17 +0000 Reply-To: "Website Contact" <[email protected]> Message-ID: <[email protected]> Content-Type: multipart/alternative; boundary="----=_NextPart_000_3F77_7A0DF805.A8C886C0" ------=_NextPart_000_3F77_7A0DF805.A8C886C0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 SGVsbG8hIAoKIEhlcmUgYXJlIHlvdXIgdGlja2V0KHMpIGZvciBDVEFTIGVDc1RBU3kgMjAxMjog CgpodHRwczovL2NhbXB1c2FtcC5jb20vP3RpY2tldHMvNy95aGloZ3Znd3Z3cWR3cXhtdnQKClNp bXBseSBicmluZyBpdCB3aXRoIHlvdSBvbiB5b3VyIHNtYXJ0cGhvbmUsIG9yIHByaW50IHRoZSB0 aWNrZXQgb3V0IHRvIGJlIHNjYW5uZWQgYXQgdGhlIGV2ZW50LiBFbmpveSwgYW5kIHdlIGFwcHJl Y2lhdGUgeW91ciBwdXJjaGFzZS4KClNpbmNlcmVseSwKVGhlIENhbXB1c0FtcCBUZWFt ------=_NextPart_000_3F77_7A0DF805.A8C886C0 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: base64 SGVsbG8hIDxici8+PGJyLz4gSGVyZSBhcmUgeW91ciB0aWNrZXQocykgZm9yIENUQVMgZUNzVEFT eSAyMDEyOjxici8+PGEgaHJlZj0iaHR0cDovL2VtYWlsLmNhbXB1c2FtcC5jb20vdHJhY2tpbmcv Y2xpY2s/bXNnaWQ9c3U2Zy04a2ZkMHMwZyZ0YXJnZXQ9aHR0cHMlM2ElMmYlMmZjYW1wdXNhbXAu Y29tJTJmJTNmdGlja2V0cyUyZjclMmZ5aGloZ3Znd3Z3cWR3cXhtdnQiPiBodHRwczovL2NhbXB1 c2FtcC5jb20vP3RpY2tldHMvNy95aGloZ3Znd3Z3cWR3cXhtdnQgIDwvYT4gPGJyLz48YnIvPlNp bXBseSBicmluZyBpdCB3aXRoIHlvdSBvbiB5b3VyIHNtYXJ0cGhvbmUsIG9yIHByaW50IHRoZSB0 aWNrZXQgb3V0IHRvIGJlIHNjYW5uZWQgYXQgdGhlIGV2ZW50LiBFbmpveSwgYW5kIHdlIGFwcHJl Y2lhdGUgeW91ciBwdXJjaGFzZS48YnIvPjxici8+U2luY2VyZWx5LDxici8+VGhlIENhbXB1c0Ft cCBUZWFtPGltZyBzcmM9Imh0dHA6Ly9lbWFpbC5jYW1wdXNhbXAuY29tL3RyYWNraW5nL29wZW4/ bXNnaWQ9c3U2Zy04a2ZkMHMwZyIgc3R5bGU9IndpZHRoOjFweDtoZWlnaHQ6MXB4IiBhbHQ9IiIg Lz4= ------=_NextPart_000_3F77_7A0DF805.A8C886C0--

    Read the article

  • Add Windows 7’s AeroSnap Feature to Vista and XP

    - by Asian Angel
    Are you using Windows Vista or XP and want that Windows 7 AeroSnap goodness on your own system? Then join us as we look at AeroSnap for Windows Vista and XP. Note: Requires .NET Framework 2.0 or higher (link provided at bottom of article). Setup What exactly does AeroSnap do you might ask…here is a quote directly from the website: “AeroSnap is a simple but powerful application that allows you to resize, arrange or maximize your desktop windows with just drag’n'drop. Simply drag a window to a side of your desktop to snap it or drag it to the top to maximize. When you drag it back to the last position, the last window size will be restored.” As soon as you have finished installing AeroSnap and started it for the first time the only item that will be visible is the “System Tray Icon”. Before going any further you should take a moment to view and make any desired adjustments in the “Options”. Note: AeroSnap works with multiple monitors. You may want to have AeroSnap start with Windows each time but the really nice setting to enable here is the “Snap Preview”. If you are using AeroSnap on Vista and have Aero enabled this will really be nice. The second portion may be of interest for those who would like to enable the keyboard shortcut function. One point worth noting about this screen is that the highest number of pixels from the screen’s edge that you can set AeroSnap for is 20 pixels. AeroSnap in Action AeroSnap is extremely easy to use…just grab the top of an app window and drag it to the left, right, or top of your screen. Since we installed this on Windows Vista we made certain to enable the “Snap Preview” in the “Options”.  We started off with dragging our Firefox 3.7 window towards the left…once we got close to the edge of the screen you can see that the left half of the screen temporarily “shaded over”. Note: The “Snap Preview” displays on the left and right movements but not the top movement. Releasing Firefox snapped it right into the “shaded over” part of the screen. The great thing about AeroSnap is that it is really easy to return the app window to it former size…all that you have to do is simply click on and grab the top portion of the app window. Moving Firefox towards the top of our screen and… It quickly snaps into filling the screen. One thing that we did notice is that the window did not “Maximize” as per the function for the button in the upper right corner. Dragging towards the right side now… And snap! Tucked in all nice and neat… You can minimize the app windows to the Taskbar and they will return to their previous “snap area” when “maximized” again. Conclusion If you have been wanting to add Windows 7’s AeroSnap goodness to your Vista and XP systems then you should definitely give this app a try. AeroSnap is very easy to set up and operate… Links Download AeroSnap for Windows Vista & XP Download the .NET Framework Similar Articles Productive Geek Tips Using Windows 7 or Vista System RestoreRoundup: 16 Tweaks to Windows Vista Look & FeelSelect Files using Check Boxes in Windows VistaSpeed up Your Windows Vista Computer with ReadyBoostHow-To Geek Bounty: $103.24(Paid!) for Active Desktop for Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC Live Map of Marine Traffic NoSquint Remembers Site Specific Zoom Levels (Firefox) New Firefox release 3.6.3 fixes 1 Critical bug Dark Side of the Moon (8-bit)

    Read the article

  • Silverlight Cream for January 30, 2011 -- #1037

    - by Dave Campbell
    In this Issue: Ollie Riches, Colin Eberhardt, Andrej Tozon, Arik Poznanski, Deborah Kurata(-2-), Jay Kimble, Yochay Kiriaty, Peter Kuhn, Mike Ormond, WindowsPhoneGeek(-2-), and Matthias Shapiro. Above the Fold: Silverlight: "Missing Chart Legend" Deborah Kurata WP7: "XNA for Silverlight developers: Part 2 - Text rendering" Peter Kuhn Shoutouts: Timmy Kokke has a post up discussing What’s new in the Expression Design January 2011 preview? From SilverlightCream.com: WP7Contrib: Thread safe ObservableCollection<T> Ollie Riches, one of the two originators of WP7Contrib, has a post up on the WP7C ObservableCollection... what and why. Windows Phone 7 DeferredLoadContentControl Colin Eberhardt's latest is one we should all take notice of... a content control that defers rendering to provide a better user experience... source code is available as are some good external links Andrej Tozon on Hey weigh! WP7 application SilverlightShow interviews WP7 Dev Andrej Tozon and gets his take on his app, challenges, tips, and the future of WP7. A ProgressBar With Text For Windows Phone 7 Arik Poznanski demonstrates putting text up on the progress bar to let your users know what you're up to... and it looks great in the screenshots. Charting in a Silverlight Application using MVVM Deborah Kurata is checking out the Charting control this time around... using the charting control from the toolbox in the MVVM app she built in the last post... C# and VB code as always. Missing Chart Legend Deborah Kurata's latest in the world of Charting and MVVM involves using a custom theme and having your chart legend disappear... never fear, she's gonna tell you how to fix that! Silverlight/WP7 tip: Detecting when in VS Design Mode Jay Kimble has a post up that not only resolves a question you may need answered during development (are you in VS design Mode), but it also helps resolve a class of problem that Jay explains. Windows Phone GPS Emulator Yochay Kiriaty points out that while part of the issues of building a GPS-driven app for WP7 is getting your head around the tools, the next hurdle is testing... and that's what he's really discussing... "Windows Phone GPS Emulator" ... if you're playing with the GPS, you'll want this. XNA for Silverlight developers: Part 2 - Text rendering Peter Kuhn's latest tutorial in his XNA series for Silverlight developers is up at SilverlightShow... in this tutorial, Peter discusses text... it's a vastly different game displaying text in XNA as compared to Silverlight ... check it out and see. OData and Windows Phone 7 Mike Ormond starts you off using OData on your WP7 by showing where to download the libraries, and not stopping until he has an app running that reads an OData feed, plus he plans on continuing the quest in future posts. WP7 ProgressOverlay control in depth: features and customization WindowsPhoneGeek has a couple new posts up. The first one is an in-depth look at the ProgressOverlay control in the Codeing4fun Toolkit... pretty cool to be able to put your logo or app logo up. On Testing Windows Phone 7 Applications – Part II: Dealing with the WP7 Application Model WindowsPhoneGeek also has 5 more WP7 testing tips... and these are a little more technical than the first set, and includes some good external links. Topics include: Tombstoning, Usability, Navigation, Capabilities, and Memory consumption. Fun Theme-Friendly Windows Phone Icon Matthias Shapiro explains how to have your WP7 icon change based on the theme your user has chosen... great examples, and XAML included Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Fusion CRM ISV program is gaining weight: Examples of certified add-on's

    - by Richard Lefebvre
    The Fusion CRM ISV program is gaining traction. Please find below few examples of the partners having certified their add-on's to seamlessly work on top of Oracle Fusion CRM. For more information, please contact [email protected] ·         Opportunity-to-Quote.  Big Machines now integrates seamlessly to Oracle Fusion CRM, enabling customers with complex products and services and multiple sales channels to streamline the entire opportunity-to-quote process, including product selection, configuration, pricing, quoting, and approval workflows.  Create a custom hyperlink in the Opportunity to invoke Big Machines CPQ application to create a quote and sync up with the Fusion CRM custom quote object using the CRUD operations. The quote can be updated using the custom button in the custom tab in the opportunity details. See: http://www.bigmachines.com/oracle.php  ·         SaaS Billing and Subscription Management.  Is your prospect/customer asking whether top billing partners support Fusion CRM?  Positioning an integrated CRM solution for billing usage and subscription based services?  Need to implement a billable solution on the Oracle Java Cloud Service?  Aria Systems and Zuora have recently engaged with Oracle to deepen their integrations to Fusion CRM and team with Oracle for joint opportunities.  ·         Google Apps, SharePoint, Email-CRM Integrations o   Do your prospects use Google Apps in their business operations?  A “Best of AppExchange” award winner recently completed their integration for Fusion CRM.  CirrusInsight plugs Fusion CRM web services directly into Gmail, allowing you to search existing opportunity or contact, provide account information, and create an interaction such as phone call, appointment, or email against a customer or contact in Fusion CRM directly from Gmail.  o   An EMEA / France based partner, Aryvart provides bi-directional synchronization of appointments and tasks between Google calendar and Oracle Fusion CRM. For customers, it means adopting Oracle Fusion CRM while continuing to use Google calendar for appointments. o   Looking to lower the barrier and expand in SharePoint accounts?  InFact Group (EMEA / France & Germany) provides Microsoft SharePoint Connector for Oracle Fusion CRM. With this solution, you can store documents attached to an opportunity, into Microsoft SharePoint repository. For customers, it means adopting Oracle Fusion CRM while continuing to collaborate across existing content management infrastructure. o   Need to connect to MacMail, GroupWise, or Outlook/Exchange?  Omni Technology is a partner whose Riva CRM Integration recently engaged for support Fusion CRM as a key platform. Migration Tools from competitive CRMs, to Oracle Fusion CRM.  Data Migration Tools from legacy CRMs, to Oracle Fusion CRM.  A partner with the tools and techniques to speed adoption, Conemis provides data integration tools to export data from legacy CRM, and import into Oracle Fusion CRM via WebServices APIs. For customers, it means reducing cost of data migration from legacy CRM system into Oracle Fusion CRM. 

    Read the article

  • How to Sync Any Browser’s Bookmarks With Your iPad or iPhone

    - by Chris Hoffman
    Apple makes it easy to synchronize bookmarks between the Safari browser on a Mac and the Safari browser on iOS, but you don’t have to use Safari — or a Mac — to sync your bookmarks back and forth. You can do this with any browser. Whether you’re using Chrome, Firefox, or even Internet Explorer, there’s a way to sync your browser bookmarks so you can access your same bookmarks on your iPad. Safari on a Mac Apple’s iCloud service is the officially supported way to sync data with your iPad or iPhone. It’s included on Macs, but Apple also offers similar iCloud bookmark syncing features for Windows. On a Mac, this should be enabled by default. To check whether it’s enabled, you can launch the System Preferences panel on your Mac, open the iCloud preferences panel, and ensure the Safari option is checked. If you’re using Safari on Windows — well, you shouldn’t be. Apple is no longer updating Safari for Windows. iCloud allows you to synchronize bookmarks between other browsers on your Windows system and Safari on your iOS device, so Safari isn’t necessary. Internet Explorer, Firefox, or Chrome via iCloud To get started, download Apple’s iCloud Control Panel application for Windows and install it. Launch the iCloud Control Panel and log in with the same iCloud account (Apple ID) you use on your iPad or iPhone. You’ll be able to enable Bookmark syncing with Internet Explorer, Firefox, or Chrome. Click the Options button to select the browser you want to synchronize bookmarks with. (Note that bookmarks are called “favorites” in Internet Explorer.) You’ll be able to access your synced bookmarks in the Safari browser on your iPad or iPhone, and they’ll sync back and forth automatically over the Internet. Google Chrome Sync Google Chrome also has its own built-in sync feature and Google provides an official Chrome app for iPad and iPhone. If you’re a Chrome user, you can set up Chrome Sync on your desktop version of Chrome — you should already have this enabled if you have logged into your Chrome browser. You can check if this Chrome Sync is enabled by opening Chrome’s settings screen and seeing whether you’re signed in. Click the Advanced sync settings button and ensure bookmark syncing is enabled. Once you have Chrome Sync set up, you can install the Chrome app from the App Store and sign in with the same Google account. Your bookmarks, as well as other data like your open browser tabs, will automatically sync. This can be a better solution because the Chrome browser is available for so many platforms and you gain the ability to synchronize other browser data, such as your open browser tabs, between your devices. Unfortunately, the Chrome browser is slower than Apple’s own Safari browser on iPad and iPhone because of the way Apple limits third-party browsers, so using it involves a trade-off. Manual Bookmark Sync in iTunes iTunes also allows you to sync bookmarks between your computer and your iPad or iPhone. It does this the old-fashioned way, by initiating a manual sync when your device is plugged in via USB. To access this option, connect your device to your computer, select the device in iTunes, and click the Info tab. This is the more outdated way of synchronizing your bookmarks. This feature may be useful if you want to create a one-time copy of your bookmarks from your PC, but it’s nowhere near ideal for regular syncing. You don’t have to use this feature, just as you really don’t have to use iTunes anymore. In fact, this option is unavailable if you’ve set up iCloud syncing in iTunes. After you set up bookmark syncing via iCloud or Chrome Sync, bookmarks will sync immediately after you save, remove, or edit them.     

    Read the article

  • ASP.NET MVC for the php/asp noob

    - by dotjosh
    I was talking to a friend today, who's foremost a php developer, about his thoughts on Umbraco and he said "Well they're apparently working feverishly on the new version of Umbraco, which will be MVC... which i still don't know what that means, but I know you like it." I ended up giving him a ground up explanation of ASP.NET MVC, so I'm posting this so he can link this to his friends and for anyone else who finds it useful.  The whole goal was to be as simple as possible, not being focused on proper syntax. Model-View-Controller (or MVC) is just a pattern that is used for handling UI interaction with your backend.  In a typical web app, you can imagine the *M*odel as your database model, the *V*iew as your HTML page, and the *C*ontroller as the class inbetween.  MVC handles your web request different than your typical php/asp app.In your php/asp app, your url maps directly to a php/asp file that contains html, mixed with database access code and redirects.In an MVC app, your url route is mapped to a method on a class (the controller).  The body of this method can do some database access and THEN decide which *V*iew (html/aspx page) should be displayed;  putting the controller in charge and not the view... a clear seperation of concerns that provides better reusibility and generally promotes cleaner code. Mysite.com, a quick example:Let's say you hit the following url in your application: http://www.mysite.com/Product/ShowItem?Id=4 To avoid tedious configuration, MVC uses a lot of conventions by default. For instance, the above url in your app would automatically make MVC search for a .net class with the name "Product" and a method named "ShowItem" based on the pattern of the url.  So if you name things properly, your method would automatically be called when you entered the above url.  Additionally, it would automatically map/hydrate the "int id" parameter that was in your querystring, matched by name.Product.cspublic class Product : Controller{    public ViewResult ShowItem(int id)    {        return View();    }} From this point you can write the code in the body of this method to do some database access and then pass a "bag" (also known as the ViewData) of data to your chosen *V*iew (html page) to use for display.  The view(html) ONLY needs to be worried about displaying the flattened data that it's been given in the best way it can;  this allows the view to be reused throughout your application as *just* a view, and not be coupled to HOW the data for that view get's loaded.. Product.cspublic class Product : Controller{    public ViewResult ShowItem(int id)    {        var database = new Database();        var item = database.GetItem(id);        ViewData["TheItem"] = item;        return View();    }} Again by convention, since the class' method name is "ShowItem", it'll search for a view named "ShowItem.aspx" by default, and pass the ViewData bag to it to use. ShowItem.aspx<html>     <body>      <%        var item =(Item)ViewData["TheItem"]       %>       <h1><%= item.FullProductName %></h1>     </body></html> BUT WAIT! WHY DOES MICROSOFT HAVE TO DO THINGS SO DIFFERENTLY!?They aren't... here are some other frameworks you may have heard of that use the same pattern in a their own way: Ruby On Rails Grails Spring MVC Struts Django    

    Read the article

  • OSB and Coherence Integration

    - by mark.ms.smith
    Anyone who has tried to manage Coherence nodes or tried to cache results in OSB, will appreciate the new functionality now available. As of WebLogic Server 10.3.4, you can use the WebLogic Administration Server, via the Administration Console or WLST, and java-based Node Manager to manage and monitor the life cycle of stand-alone Coherence cache servers. This is a great step forward as the previous options mainly involved writing your own scripts to do this. You can find an excellent description of how this works at James Bayer’s blog. You can also find the WebLogic documentation here.As of Oracle Service Bus 11gR1 (11.1.1.3.0), OSB now supports service result caching for Business Bervices with Coherence. If you use Business Services that return somewhat static results that do not change often, you can configure those Business Services to cache results. For Business Services that use result caching, you can control the time to live for the cached result. After the cached result expires, the next Business Service call results in invoking the back-end service to get the result. This result is then stored in the cache for future requests to access. I’m thinking that this caching functionality would be perfect for some sort of cross reference data that was refreshed nightly by batch. You can find the OSB Business Service documentation here.Result Caching in a dedicated JVMThis example demonstrates these new features by configuring a OSB Business Service to cache results in a separate Coherence JVM managed by WebLogic. The reason why you may want to use a separate, dedicated JVM is that the result cache data could potentially be quite large and you may want to protect your OSB java heap.In this example, the client will call an OSB Proxy Service to get Employee data based on an Employee Id. Using a Business Service, OSB calls an external system. The results are automatically cached and when called again, the respective results are retrieved from the cache rather than the external system.Step 1 – Set up your Coherence Server Via the OSB Administration Server Console, create your Coherence Server to be used as the results cache.Here are the configured Coherence Server arguments from the Server Start tab. Note that I’m using the default Cache Config and Override files in the domain.-Xms256m -Xmx512m -XX:PermSize=128m -XX:MaxPermSize=256m -Dtangosol.coherence.override=/app/middleware/jdev_11.1.1.4/user_projects/domains/osb_domain2/config/osb/coherence/osb-coherence-override.xml -Dtangosol.coherence.cluster=OSB-cluster -Dtangosol.coherence.cacheconfig=/app/middleware/jdev_11.1.1.4/user_projects/domains/osb_domain2/config/osb/coherence/osb-coherence-cache-config.xml -Dtangosol.coherence.distributed.localstorage=true -Dtangosol.coherence.management=all -Dtangosol.coherence.management.remote=true -Dcom.sun.management.jmxremote Just incase you need it, here is my Coherence Server classpath:/app/middleware/jdev_11.1.1.4/oracle_common/modules/oracle.coherence_3.6/coherence.jar: /app/middleware/jdev_11.1.1.4/modules/features/weblogic.server.modules.coherence.server_10.3.4.0.jar: /app/middleware/jdev_11.1.1.4/oracle_osb/lib/osb-coherence-client.jarBy default, OSB will try and create a local result cache instance. You need to disable this by adding the following JVM parameters to each of the OSB Managed Servers:-Dtangosol.coherence.distributed.localstorage=false -DOSB.coherence.cluster=OSB-clusterIf you need more information on configuring a remote result cache, have a look at the configuration documentration under the heading Using an Out-of-Process Coherence Cache Server.Step 2 – Configure your Business Service Under the respective Business Service Message Handling Configuration (Advanced Properties), you need to enable “Result Caching”. Additionally, you need to determine what the cache data will be keyed on. In the example below, I’m keying it on the unique Employee Id.The Results As this test was on my laptop, the actual timings are just an indication that there is a benefit to caching results. Using my test harness, I sent 10,000 requests to OSB, all with the same Employee Id. In this case, I had result caching disabled.You can see that this caused the back end Business Service (BS_GetEmployeeData) to be called for each request. Then after enabling result caching, I sent the same number of identical requests.You can now see the Business Service was only invoked once on the first request. All subsequent requests used the Results Cache.

    Read the article

  • Listen to Online Radio with Antenna

    - by Asian Angel
    Are you looking for some fresh new music to listen to at home or at work? With Antenna you can listen to online radio stations from all over the world. Note: Requires Adobe AIR (download link at bottom of article). Antenna in Action Once you have completed the installation and started Antenna up this is the window that you will see. The left side will have a “browsing pane” where you can search for the stations that you would like to listen to using the various categories. Based on the stations that you choose the background map will change location to match the stations locations. Here is a closer look at the “Categories Bar”. For our first example we used the “Country Category” to find our first station to listen to. When you choose a country you will be presented with a list of the stations available for that country. To start listening to a particular station just double click on the appropriate entry line. A closer look at the “browser pane” with our first station playing. Notice the “Reliability Indicator” that will be available for each listing…some may be better than others and you can use this to choose the best streaming stations from the list. In the upper left corner you will notice three icons…each will open a small pop-up window with a specific purpose. The first icon will open up the “About Window”. If you need to contact Antenna’s creator or would like to place a request for a station to be added to the app then this is the best way to do it. The second icon will open up a Antenna specific chat window. The third icon will allow you to set a default location and make adjustments to some of the app’s settings. Recording Audio The “Recording Function” is the only area where we experienced some “quirkiness” with the app. To start recording press the “Round White Button”… Note: Based on feedback on the app creator’s webpage some people have experienced the same problem as we did during our tests with the app failing to complete the recordings. Hopefully this bug will be fixed with the next release. Once recording has started the button will turn red. Click on the button again to stop recording. Once you have stopped recording you will see the following message window appear and the main window will be shaded over with a whitish color until you click “OK”. Conclusion Regardless of the slight quirkiness in recording online music Antenna more than makes up for it with the terrific selection of online stations and streaming capability. New fresh music for you to listen to is only a click or two away… Links Download Antenna (Antenna Homepage) Download Antenna at Softpedia Download Adobe AIR Similar Articles Productive Geek Tips Listen to Local FM Radio in Windows 7 Media CenterListen to Over 100,000 Radio Stations in Windows Media CenterListen To XM Radio with Windows Media Center in Windows 7Listen and Record Over 12,000 Online Radio Stations with RadioSureWeekend Fun: Watch Television on Your PC with AnyTV TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Will it Blend? iPad Edition Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC Live Map of Marine Traffic

    Read the article

  • Windows Azure Mobile Services Updates Keep Coming

    - by Clint Edmonson
    Some exciting new Windows Azure Mobile Services features were delivered to production this week. The highlights include: iPhone and iPad connectivity support via a new iOS SDK Integrated Authentication so developers can configure user authentication via Microsoft Account, Facebook, Twitter, and Google. New server-side Mobile Service script modules Access to Structured Storage, Windows Azure Blob, Table, Queues, and ServiceBus Email services through partnership with SendGrid SMS & voice services through partnership with Twilio Mobile Services hosting expanded to west coast US The iOS SDK I’m excited to share that we've announced the release of an under-development iOS client SDK for Windows Azure Mobile Services. The iOS SDK joins the Windows 8 SDK launched with Windows Azure Mobile Services as well as client SDKs released by Xamarin for MonoTouch and MonoDroid.  The native iOS SDK is for developers programming in Objective-C on the iPhone and iPad platforms. The SDK gives developers the same level of access to data storage using dynamic schematization that is available for Windows 8. Also, iOS applications can use the same authentication options available in Mobile Services. While full iOS support is still in development, the libraries are currently available on GitHub. There’s a great getting started tutorial to walk you through building a simple iOS “Todo List” app that stores data in Windows Azure.  These additional tutorials explore how to use the iOS client libraries to store data and authenticate users: Get Started with data in Mobile Services for iOS Get Started with authentication in Mobile Services for iOS What’s New in Authentication Available to both iOS and Windows 8 developers, Mobile Services has expanded its authentication options.  Developers can now use Microsoft, Facebook, Twitter, and Google authentication. Similar to using Microsoft accounts for authentication, developers must sign up and through Facebook, Twitter, or Google's developer portal in order to authenticate through them.  These tutorials walk through how to register your Mobile Service with an identity provider: How to register your app with Microsoft Account How to register your app with Facebook How to register your app with Twitter How to register your app with Google And these tutorials walk through authenticating against Mobile Services: Get started with authentication in Mobile Services for Windows Store (C#) Get started with authentication in Mobile Services for Windows Store (JavaScript) Get started with authentication in Mobile Services for iOS What’s New in Mobile Service Scripts Some great new functionality is now available in the Mobile Service script layer.  These server side scripts are triggered off of any CRUD operation on a Mobile Service's table and can already handle doing data and query validation, filtering, web requests and more.  Today, the Azure SDK module is now available to these scripts giving them access to blob storage, service bus, table storage.  Check out the new tutorials on the Windows Azure Node.js developer center to learn more about working with Blob, Tables, Queues and Service Bus using the azure module. In addition, SendGrid and Twilio are now available via modules that can be called from the scripts as well.  This gives developers the ability to send emails (SendGrid) or SMS text messages (Twilio) whenever a script is fired.  Windows Azure customers receive a special offer of 25,000 free emails per month from SendGrid and 1000 free text messages from Twilio. Expanded Data Center Availability In addition to Mobile Services being available in our US East data center, they can now be spun up in US West. The above features are all now live in production and are available to use immediately.  If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using Mobile Services today. The Windows Azure Mobile Developer Center has been updated with new tutorials that cover these new features in detail. And don’t forget - Windows Azure Mobile Services are still free for your first ten applications running on shared compute instances. Stay tuned to my twitter feed for Windows Azure announcements, updates, and links: @clinted

    Read the article

  • Silverlight Cream for January 13, 2011 -- #1026

    - by Dave Campbell
    In this Issue: András Velvárt, Tony Champion, Joost van Schaik, Jesse Liberty, Shawn Wildermuth, John Papa, Michael Crump, Sacha Barber, Alex Knight, Peter Kuhn, Senthil Kumar, Mike Hole, and WindowsPhoneGeek. Above the Fold: Silverlight: "Create Custom Speech Bubbles in Silverlight." Michael Crump WP7: "Architecting WP7 - Part 9 of 10: Threading" Shawn Wildermuth Expression Blend: "PathListBox: Text on the path" Alex Knight From SilverlightCream.com: Behaviors for accessing the Windows Phone 7 MarketPlace and getting feedback András Velvárt shares almost insider information about how to get some user interaction with your WP7 app in the form of feedback ... he has 4 behaviors taken straight from his very cool SufCube app that he's sharing. Reloading a Collection in the PivotViewer Tony Champion keeps working with the PivotViewer ... this time discussing the fact that you can't Reload or Refresh the current collection from the server ... at least not initially, but he did find one :) Tombstoning MVVMLight ViewModels with SilverlightSerializer on Windows Phone 7 Joost van Schaik takes a shot at helping us all with Tombstoning a WP7 app... he's using Mike Talbot's SilverlightSerializer and created extension methods for it for tombstoning that he's willing to share with us. Windows Phone From Scratch #17: MVVM Light Toolkit Soup To Nuts Part 2 Jesse Liberty is up to Part 17 in his WP7 series, and this is the 2nd post on MVVMLight and WP7, and is digging into behaviors. Architecting WP7 - Part 9 of 10: Threading Shawn Wildermuth is up to part 9 of 10 in his series on Architecting WP7 apps. This episode finds Shawn discussing Threading ... know how to use and choose between BackgroundWorker and ThreadPool? ... Shawn will explain. Silverlight TV 57: Performance Tuning Your Apps In the latest Silverlight TV, John Papa chats with Mike Cook about tuning your Silverlight app to get the performance up there where your users will be happy. Create Custom Speech Bubbles in Silverlight. Michael Crump's already gotten a lot of airplay out of this, but it's so cool.. comic-style callout shapes without using the dlls that you normally would... in other words, paths, and very cool hand-drawn looks on some too... very cool, Michael! Showcasing Cinch MVVM framework / PRISM 4 interoperability Sacha Barber has a post up on CodeProject that demonstratest using Cinch and Prism4 together... handily using MEF since Cinch relies on MEFedMVVM... this is a heck of a post... lots of code, lots of explanations. PathListBox: Text on the path Alex Knight keeps making this PathListBox series better ... this time he is putting text on the path... moving text... too cool, Alex! Windows Phone 7: Pinch Gesture Sample Peter Kuhn digs into the WP7 toolkit and examines GestureListener, pinch events, and clipping... examples and code supplied. How to change the StartPage of the Windows Phone 7 Application in Visual Studio 2010 ? Senthil Kumar discusses how to change the StartPage of your WP7 app, or get the program running if you happen to move or rename MainPage.xaml WP7 Text Boxes – OnEnter (my 1st Behaviour) Mike Hole has a post up about the issue with the keyboard appearing in front of the textbox, and maybe using the enter key to drop it... and he's developed a behavior for that process. WP7 ContextMenu in depth | Part1: key concepts and API WindowsPhoneGeek has some good articles that I haven't posted, but I'll catch up. This one is a nice tutorial on the WP7 Context menu... good explanation, diagrams, and code. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

< Previous Page | 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130  | Next Page >