Search Results

Search found 4609 results on 185 pages for 'master of celebration'.

Page 115/185 | < Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >

• Why are my USB 2.0 devices hanging Windows XP?

  - by BenAlabaster

  Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic ATX motherboard with no identifying markings other than one stamp that says "Rev.B". CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. On board it has 1 x 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors - it has a NEC uPD720102 chipset. It has a DVD+/-RW running as master on IDE1 and a 1.44Mb 3.5" floppy drive connected to the floppy connector. It has an 80Gb Western Digital hard drive running as master on IDE0. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine? Edit: Updated the USB 2.0 info with reference to actual card - http://www.xpcgear.com/lpnec4u.html

  Read the article

• IPV6 causing issue with DNS

  - by Mike Wells

  I have set up an 'internal' DNS at my work, basically we have ourdomain.com that is for internet, email etc and I have created on one of our linux network servers (debian) a DNS using bind9 with the domain ourdomain.inc. So based on my files below and the symptoms I'm describing; what effect could IPV6 be having on my setup? What can I do to fix this? I assume it is not actually the IPV6 causing the issue, but rather something in my setup. These are the critical (I think) files I have modified: named.conf.local zone "ourdomain.inc" { type master; file "/etc/bind/zones/ourdomain.inc.db"; }; zone "201.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.201.168.192.in-addr.arpa"; }; named.conf.options options { directory "/var/cache/bind"; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. forwarders { 1.2.3.4; //IP of our external DNS provider }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; ourdomain.inc.db $TTL 86400 ourdomain.inc. IN SOA ns1.ipower.com. admin.ourdomain.inc. ( 2006081401 28800 3600 604800 38400 ) serv1 IN A 192.168.201.223 serv2 IN A 192.168.201.220 serv3 IN A 192.168.201.219 ns1.ipower.com. IN A 1.2.3.4 ns2.ipower.com. IN A 1.2.3.5 @ IN NS ns1.ipower.com. @ IN NS ns2.ipower.com. svn IN CNAME serv1 docs IN CNAME serv2 jira IN CNAME serv3 confluence IN CNAME serv3 fisheye IN CNAME serv3 rev.201.168.192.in-addr.arpa $TTL 86400 201.168.192.in-addr.arpa. IN SOA ns1.ipower.com. admin.ourdomain.inc. ( 2006081401; 28800; 604800; 604800; 86400 ) 223 IN PTR serv1 @ IN NS ns1.ipower.com. @ IN NS ns2.ipower.com. named.conf include "/etc/bind/named.conf.options"; include "/etc/bind/named.conf.local"; include "/etc/bind/named.conf.default-zones"; I then made our internal DNS my preferred DNS with the two external DNSs the next in-line. More the most part this seems to work, I can ping svn.ourdomain.inc and it resolves to the correct IP, I can also ping google.com and it also resolves no problem. So all seem good. However, periodically (couple of times a day at least), I loose the ability to ping the svn.domain.inc (and all others defined under the internal DNS). What seem to fix the issue temporarily is to disable IPV6 on the network adapter of the client machine and then re-enable it. Then it works for a bit but will always fail again. System Info Internal DNS Distributor ID: Debian Description: Debian GNU/Linux 6.0.6 (squeeze) Release: 6.0.6 Codename: squeeze Linux 2.6.32-5-686 i686 BIND 9.7.3 PC OS Name: Microsoft Windows 7 Professional OS Version: 6.1.7601 Service Pack 1 Build 7601 System Type: x64-based PC Network Card(s): 2 NIC(s) Installed. [01]: Realtek PCIe GBE Family Controller Connection Name: WORK LAN DHCP Enabled: No IP address(es) [01]: the.ipv4.address [02]: the:ipv6:address The question... So based on my files above and the symptoms I described; what effect could IPV6 be having on my setup? What can I do to fix this? I assume it is not actually the IPV6 causing the issue, but rather something in my setup.

  Read the article

• How to stop nginx on Mac OS X

  - by Alex Kaushovik

  I've installed nginx server on my Mac from MacPorts: sudo port install nginx. Then I followed the recommendation from the port installation console and created the launchd startup item for nginx, then started the server. It works fine (after I renamed nginx.conf.example to nginx.conf and renamed mime.types.example to mime.types), but I couldn't stop it... I tried sudo nginx -s stop - this doesn't stop the server, I can still see "Welcome to nginx!" page in my browser on http://localhost/, also I still see master and worker processes of nginx with ps -e | grep nginx. What is the best way to start/stop nginx on Mac? BTW, I've added "daemon off;" into nginx.conf - as recommended by various resources. Thank you.

  Read the article

• MySQL Cluster Failover doesn't work

  - by Lukasz

  I have two servers, where First server 10.100.15.150: 1. one mgm server 2. one ndbd 3. one mysql api Second server 10.100.15.160: 1. one ndbd 2. one mysql api When i start all 'parts' of cluster it looks : Cluster Configuration [ndbd(NDB)] 2 node(s) id=21 @10.100.15.150 (mysql-5.1.56 ndb-7.1.17, Nodegroup: 0) id=22 @10.100.15.160 (mysql-5.1.56 ndb-7.1.17, Nodegroup: 0, Master) [ndb_mgmd(MGM)] 1 node(s) id=3 @10.100.15.150 (mysql-5.1.56 ndb-7.1.17) [mysqld(API)] 2 node(s) id=11 @10.100.15.150 (mysql-5.1.56 ndb-7.1.17) id=12 @10.100.15.160 (mysql-5.1.56 ndb-7.1.17) When i shutdown first machine - 10.100.15.150, on second the nbdb process also has been shutdown so i cannot use this data node and cluster fail ... How i must configure this cluster to get FailOver working ? Thx

  Read the article

• Installing the Apple Root Certificate Authority on CentOS CLI

  - by Daniel Hollands

  I could be barking up the wrong tree here, but I'm looking for help on installing Apple's Root certificate (http://www.apple.com/certificateauthority/) on a CentOS server via the command line - which I need to send messages to their APNS system. The code I'm using for this purpose is a variation on this: https://github.com/jPaolantonio/SimplePush/blob/master/simplepush.php - which works perfectly well on a Windows server, but as soon as we try to use it on a CentOS one, it falls over. We're lead to believe this has something to do with not having the CA installed on our CentOS box - but all efforts to do so have failed. As the CentOS server is headless, we need the ability to do this via the commandline. Can someone help?

  Read the article

• Is this a valid backup strategy for MongoDB?

  - by James Simpson

  I've got a single dedicated server with a MongoDB database of around 10GB. I need to do daily backups, but I can't have downtime with the database. Is it possible to use a replica set on a single disk (with 2 instances of mongod running on different ports), and simply take the secondary one offline and backup the data files to an offsite storage such as S3 (journaling is turned on)? Or would using master/slave be better than a replica set? Is this viable, and if so, what potential problems could I have? If not, how do I conceptualize this to work?

  Read the article

• DNS Zone file and virtual host question

  - by Jake

  Hi all, I'm trying to set up a virtual host for redmine.SITENAME.com. I've edited the httpd.conf file and now I'm trying to edit my DNS settings. However, I'm not sure exactly what to do. Here's an snippet of what's already in the named.conf file (the file was made by someone else who is unreachable): zone "SITENAME.com" { type master; file "SITENAME.com"; allow-transfer { ip.address.here.00; common-allow-transfer; }; }; I figure if I want to get redmine.SITENAME.com working, I need to copy that entry and just replace SITENAME.com with redmine.SITENAME.com but will that work? I was under the impression I needed a .db file but I don't see any reference to one in the current named.conf file. Any advice would be great and if you need more info to answer the question, don't hesitate to ask.

  Read the article

• rsyslog forward all except ldap

  - by Brian

  I have Centos 6 servers running openLDAP. In the rsyslog.conf, I forward the logs to my central server with this line: *.* @10.10.10.10:514 openldap seems incredibly chatty. I have 3 servers in a multi-master cluster. Those 3 servers generate twice as many logs as my other 80 servers combined. I have been unsuccessful in figuring out how to tell openLDAP to use a sensible log level. (we never specifically set the log level) Since these are my main authentication sources, I'm a bit hesitant to "play around" with them. Is there a way to tell rsyslog to forward everything EXCEPT LOCAL4?

  Read the article

• Tracking the linux config with git: how?

  - by Pierre

  I'd like to track my linux configurations with git. My idea is to have a branch for each server. /etc is not the only one directory to be tracked (I won't git init in '/etc' ) As far as I could see, it is possible to init a git for a distant directory. I tried this: # mkdir -p /git/.git # cd /git # git --work-tree=/ --git-dir=/git/.git init Initialized empty Git repository in /git/.git/ 1) Creating a new branch before everything is not possible # git branch server1 fatal: Not a valid object name: 'HEAD'. 2) adding a file in master/HEAD is not possible # touch README.md # git add README.md fatal: Unable to create '//.git/index.lock': No such file or directory how should I properly setup git to track my system-config ? Thanks. P.

  Read the article

• Hard Drive upgrade advice for a Dell PowerEdge 1950

  - by user8185

  My setup is a Dell PowerEdge 1950 with 2x 140Gb Hard drives in a RAID 1 configuration. The OS is Windows 2003 Web Edition and disk is partitioned into to two, a 12Gb C: partition and the remainder is the D: drive. Both are very close to full capacity. Ideally I want to replace those drives with 2x 1Tb drives while retaining all data. First of all is this possible without rebuilding the server? If so, will I need any 3rd party software, Symantec Ghost, Partition Master for e.g., to do this? Any general advice as to how to go about doing this?

  Read the article

• Looking for internet traffic manager software for Windows 7

  - by Semyon Perepelitsa

  I have 128 KB/s (1 Mbit/s) internet connection. Not quite fast for downloading big files, but it is okay for internet browsing. When I start big file dowload, I cannot surf the web normally: pages appears slowly, especially pictures there. Therefore I pause downloading, but I'm regularly spending much time on reading articles or leaving the computer alone, when I can allow the file being dowloaded. Is there any software that can automize the process of pausing and resuming download or simply automatically regulate internet speed for each application using Internet? I download files using different software and protocols (Download Master for http, ftp; uTorrent for torrents; many other programs for updating themselves), so I don't want to be tied to particular program for downloading.

  Read the article

• PHP-FPM runs PHP scripts as root

  - by fwalch

  I have a web server setup using nginx and PHP-FPM listening on a Unix socket. In my php-fpm.conf, I have specified user = www group = www When I run ps aux, I can see that the php-fpm worker processes run as www; the php-fpm master process runs as root. However, I noticed that PHP scripts are executed as root; at least that's the output of echo get_current_user(); What can I do to run scripts as the www user? How can this even happen if the worker processes run as www?

  Read the article

• How to run django on localhost with nginx and uwsgi?

  - by user2426362

  How to run django on localhost with nginx and uwsgi? This im my config but not works. nginx: server { listen 80; server_name localhost; access_log /var/log/nginx/localhost_access.log; error_log /var/log/nginx/localhost_error.log; location / { uwsgi_pass unix:///tmp/localhost.sock; include uwsgi_params; } location /media/ { alias /home/user/projects/zt/myproject/myproject/media/; } location /static/ { alias /home/user/projects/zt/myproject/myproject/static/; } } uwsgi: [uwsgi] vhost = true plugins = python socket = /tmp/localhost.sock master = true enable-threads = true processes = 2 wsgi-file = /home/user/projects/zt/myproject/myproject/wsgi.py virtualenv = /home/user/projects/zt chdir = /home/user/projects/zt/myproject touch-reload = /home/user/projects/zt/myproject/reload This config work on my ubuntu server with normal domain (not localhost) but on localhost not working. If I run localhost in web browser I have Welcome to nginx!

  Read the article

• Can't install Ubuntu 12 into VirtualBox (USB not recognized, ISO would not boot)

  - by wvxvw

  I'm trying out VirtualBox 4.18 and wanted to install Ubuntu 12 as a test. After installing VirtualBox (on Debian squeeze/sid), creating a virtual machine for Ubuntu and pointing it in Settings Storage IDE Controllers to the ISO with the proper version of Ubuntu, checked the "Live CD" option. Tried to define the IDE as master / slave, primary / secondary - all to no effect, and trying to boot this system, I'm getting to the screen which says: FATAL: could not read from the boot medium! System halted I've copied the same ISO to the USB stick, and I can boot from the USB (outside VirtualBox). I've looked at couple of tutorials / walk-through, there's nothing I can see that I would've done wrong. So, how would I configure it to boot from the desired ISO? Below is the snapshot with the current settings (sorry, I don't know how to get them as text).

  Read the article

• No longer able to run photo software on XP

  - by Peter

  I have Olympus Master 2 and Photoimpression 6 on my system which is running with XP Pro. Both programmes ran fine till recently and neither now works. I have run Avira and AVG anti virus (only one loaded at a time), Superantispyware, Spybot and Malwarebytes and removed the usual dross but no help. I have also uninstalled and reinstalled both several times but again no help. Both programmes load but the Olympus one immediately passes to the usual 'its met a problem and needs to close'...Photoimpression loads fully but as soon as I go to the edit screen it gives the same message. I have tried another profile to no avail. Any idea why this is and what the solution is??

  Read the article

• Resolving host names to their domain name in an internal BIND domain

  - by Adam Plumb

  I'm setting up a domain on my home network for learning purposes, using BIND on CentOS to act as the name server. I've got the name server up and running as type master for my internal domain (plumbnicoll.family), and can do forward and reverse lookups from other computers in my LAN. For example, host office2.plumbnicoll.family correctly returns office2.plumbnicoll.family has address 192.168.1.3. What I'd like is to be able to resolve just office2 to its address, without needing to put .plumbnicoll.family at the end. Is this possible, or even desirable to do? I'm running a mixed environment at home with both Linux and Windows computers.

  Read the article

• An equivalent of IceCast but for Live Video Streaming ?

  - by Kedare

  Hello, I am looking for a solution to Stream live video like that : A camera/webcam/video output ---> Stream server ---> Clients And if possible multiple Stream Servers like this (like IceCast): A camera/webcam/video output --> Master Stream server +---> Slave Stream Server ---> Clients | `--> Clients | `--> Slave Stream Server ---> Clients `--> Clients The clients will be in flash, so I think RTMP should be a good protocol, I've heard of Red5, is it good for that ? Does it scale ? I would like to get statistics (Amount of clients, Bandwidth, etc), is it possible with red5 ? Do you know any other good solution to do that ? (Only free and if possible Open Source) Thank you !

  Read the article

• Postfix configuration w.r.t. port 25

  - by Monkey Boson

  After a considerable amount of research, I have configured my postfix server to use dovecot to accept SMTPS connections over port 465 and everything works swimmingly. Unfortunately, I forgot that, unless I listen to port 25, I'm not going to receive any e-mail from the net. I'm hoping somebody knows off the top of their head how to open up port 25 on Postfix for anonymous users, but disallow relaying and any other bad things on that port. And to leave the port 465 the way it is. As to my current configuration, I changed the master.cf file: smtps inet n - n - - smtpd and the main.cf file: # Use our SSL certificates smtpd_tls_cert_file = .....cer smtpd_tls_key_file = .....key smtpd_tls_security_level = may # Use Dovecot for SASL authentication smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth broken_sasl_auth_clients = yes smtpd_recipient_restrictions = permit_sasl_authenticated, reject_unauth_destination Any help is appreciated!

  Read the article

• Making audio CDs en mass - Linux based solutions?

  - by The Journeyman geek

  My mom's sings and gives away cds to people. Invariably it falls to me to have to burn cds for her, and burning 50-100 cds on a single drive is a pain. I DO have a handful of cd burners and a slightly geriatric old PIII 450. This is what i want to be able to do - either point an application at a folder of WAV or MP3s, say how many copies i need on CLI (since then i can SSH into the system and use it headless) feed 2 or more CD burners cds until its done, OR pop in a single CD into a master drive and have its contents duplicated to 2 or more burners. I'd rather have it running on linux, be command line based, and be as little work as possible - almost automatic short of telling it how many copies i want would be ideal. I'm sure i'll have people wondering about legality - My mom sings her own music, and its classical, and older than copyright law, so, that's a non issue. I just want a way to make this chore a little easier, short of telling my mom to do it herself.

  Read the article

• How do I join two worksheets in Excel as I would in SQL?

  - by Joel Coehoorn

  I have two worksheets in two different Excel files. They both contain a list of names and addresses. One is a master list that includes other fields, and the other is a list that only includes name and address and an id column that was pared down by another office. I want to use the 2nd list to filter the first. I know how I could do this very easily with a database inner join, but I'm less clear on how to do this efficiently in Excel. How can join two worksheets in Excel? Bonus points for showing how to do outer joins as well, and I would greatly prefer konwing how to do this without needing a macro.

  Read the article

• uWSGI and python virtual env

  - by user27512

  I'm trying to use uWSGI with a virtual env in order to use the Trac bug tracker on it. I've installed system-wide uwsgi via pip. Next, I've installed trac in a virtualenv $ virtualenv venv $ . venv/bin/activate $ pip install trac I've then written a simple uWSGI configuration script: [uwsgi] master = true processes = 1 socket = localhost:3032 home = /srv/http/trac/venv/ no-site = true gid = www-data uid = www-data env = TRAC_ENV=/srv/http/trac/projects/my_project module = trac.web.main:dispatch_request But when I try to launch it, it fails: $ uwsgi --http :8000 --ini /etc/uwsgi/vassals-available/my_project.ini --gid www-data --uid www-data ... Set PythonHome to /srv/http/trac/venv/ ... *** Operational MODE: single process *** ImportError: No module named trac.web.main unable to load app 0 (mountpoint='') (callable not found or import error) I think uWSGI isn't using the virtual env. When inside the virtual env, I can import trac.web.main without having an ImportError. How can I do that ? Thanks

  Read the article

• DNS propagation

  - by Paddington

  I have 1 primary DNS server (ns1.mydomain.com) running on Fedora and 2 secondary ones (ns2 and ns3). DNS changes made on my web servers first goes to the primary name server and then propagates to the secondary servers. After making a DNS change on a domain on the web server, I can't see the new dns information on my ns1 when I perform: dig @ns1 A blahblah.com I then went to the master records on the names server (uses named) in the directory /var/named/run-root/var/named/masters and I see the A record has been updated appropriately. Tailing the logs /var/log/messages is not showing any errors. What could be the issue?

  Read the article

• Setting Rails up on a Linode - Nginx Issue

  - by rctneil

  I am extremely new to this so please don't shoot me down: I have set up a Linode running Ubuntu, It is all sort of working except Nginx. I am following this guide: http://rubysource.com/deploying-a-rails-application/ And this for nginx: http://library.linode.com/web-servers/nginx/installation/ubuntu-10.04-lucid When I go to my IP, I get a 500 internal server error. I have tried starting nginx and it looks like it starts fine. I run this: ps awx | grep nginx and I get: 308 ? Ss 0:00 nginx: master process /usr/sbin/nginx 2309 ? S 0:00 nginx: worker process 2311 ? S 0:00 nginx: worker process 2312 ? S 0:00 nginx: worker process 2313 ? S 0:00 nginx: worker process 2850 pts/0 S+ 0:00 grep --color=auto nginx I really am not sure what else to do to get it running. Any help? Neil

  Read the article

• Replicate portion of an LDAP directory to external server

  - by colemanm

  We're in the process of setting up a Jabber server on Amazon EC2 right now, and we'd like to have our internal users authenticate via LDAP so we don't have to create/manage a separate set of user accounts than the master directory in the office. My question is: is there a way to copy, unidirectionally, a segment of our internal LDAP directory (the user accounts OU) to an external LDAP server and authenticate Jabber against that? We're trying to work around having our externally hosted machines out in the cloud accessing our internal network directly... If we can replicate in one direction only a subset of the user accounts, then if that gets compromised we don't necessarily have a critical security breach into our internal network.

  Read the article

• VMWare - Windows XP guest licensing

  - by jcooper

  Hi, If I have a VMWare ESXi server with 4 Windows XP guests running on it, I understand that I need a separate license for each guest. Is there a way to simplify license compliance on these VMs? For example, I want to create a master VM image and boot it 4 times. By default those 4 VMs will have the same Windows activation key installed. Is there a simple solution for this? Or is it ok to do what I've described above provided I have 4 unique license keys on hand in case of audit? thanks!

  Read the article

< Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >