Search Results

Search found 586 results on 24 pages for 'chipset'.

Page 12/24 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

• No analog audio in 13.10

  - by danepowell

  I've installed 13.10 on a machine that was previously running Windows 8, and audio output isn't working out of the box. It worked fine in Windows, and the speakers work fine when hooked up to a laptop, so it must an incompatibility between Ubuntu and the motherboard. If I go to sound settings, "Built-in Audio" is selected (SPDIF is also available). This is an Intel Z77 motherboard with an integrated Creative CA0132 sound chipset. I've tried booting a live image of 13.10 (to check for a corrupt install), and the same problem exists. If I boot a live image of 13.04, the only audio output listed in sound settings is a "dummy" card. I've already tried basic troubleshooting steps, such as removing pulseaudio config directories, force-restarting alsa, and making sure the speakers aren't muted in the alsa mixer. At this point, I'm totally stumped :(

  Read the article

• Grpahic hardwares

  - by Vanangamudi

  Which vendor provides better GPGPU. my requirements are confined to rendering utilising the GPU for BSDF building for e.g. Intel started providing Ivy Bridge chipset GPU, which are comparably fast to HD5960 cards. I'm not that against nvidia or amd. but I'm a fan of Intel. how it compares to nvidia in price and performance. if possible may I know, how all of them perform with OpenCL?? I'm not sure if it is right to ask it here. but I don't know where to ask.

  Read the article

• Independent sound device for headphones

  - by amfcosta

  I have an Asus K52Jc and in sound configuration there is no independent sound device for the headphones, and so there's no way to have independent volume for speakers and headphones. Is there a way to have independent devices? Or is this hardware specific? lshw reports that I have an "Intel 5 Series/3400 Series Chipset High Definition Audio". aplay -l reports: placa 0: Intel [HDA Intel], dispositivo 0: CONEXANT Analog [CONEXANT Analog] Subdispositivos: 1/1 Subdispositivo #0: subdevice #0 placa 0: Intel [HDA Intel], dispositivo 3: HDMI 0 [HDMI 0] Subdispositivos: 1/1 Subdispositivo #0: subdevice #0

  Read the article

• How to install & upgarde my Video Drive in presice?

  - by user71382

  Greeting all out here, So one helpful folk during a troubleshoot on VirtualBox told me that my graphic driver is too old. Code: 00:00:02.714 OpenGL Info: Render SPU: GL_VENDOR: Tungsten Graphics, Inc 00:00:02.714 OpenGL Info: Render SPU: GL_RENDERER: Mesa DRI Mobile Intel® GM45 Express Chipset x86/MMX/SSE2 00:00:02.714 OpenGL Info: Render SPU: GL_VERSION: 2.1 Mesa 8.0.2 In try to shot the problem, I got at http://intellinuxgraphics.org/2012.02.html But now I don't know how to proceed & what to download & how to install the latest driver for my video card ????????????/ Any help on the matter is appreciated. Thank you,Have a nice day, Mrinal

  Read the article

• Audio output and input stopped working after the last update

  - by renatov

  I'm using Ubuntu 14.04 and everything was perfect until todays's update. Now my audio output (speakers) and input (microphone) stopped working. I guess it's a driver issue, but I need help to debug this problem and to solve it. I have a Dell Inspiron 5421 notebook with an Intel audio integrated sound card: $ lspci | grep Audio 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) If I go to Ubuntu Settings Sound Output, it doesn't show my Intel card there anymore: The same for the Input tab, it doesn's show my Intel card there anymore: Could you please help me?

  Read the article

• laptop screen goes blank after waking from sleep

  - by Tojo Chacko

  I have been facing this issue from the last week after some update. Whenever my laptop wakes up from suspend state it just shows me a blank screen. Regardless of whatever I do(move my mouse, press keyboard buttons) it just refuses to wake up. I am forced to do a restart and lose all my unsaved files. Has this issue been reported for Ubuntu 12.04? I am using a Lenovo X200 with Intel Mobile 4 Series Graphics Chipset. Please let me know if any body has found a fix for this.

  Read the article

• Constant noise in speakers and headphones

  - by user103978

  On my laptop, Samsung 300V5A-S19 I have the constant noise from the speakers. If I wear headphones, the sound becomes more pronounced (at half volume it mutes the music). The noise level is independent of the volume control. The noise disappears only when volume is completely muted. For the record, the sound is reminiscent of the noise of the waves or something like that. System information: Ubuntu 12.10, kernel 3.5.0-18 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) All packages in the system updated. PS: Following the advice from this message (click) yielded no result.

  Read the article

• How to force GNOME panels et. al. to display on a different monitor without mirroring?

  - by GrueKun

  So, I recently purchased a new 23" monitor for my PC. However, I can't use it with the PC currently as I am waiting on a replacement heatsink. In the mean time, I wanted to use it with my Dell laptop. I hooked it up to the VGA port, and it seems to be working properly. However, I wanted to know if there was a way I could move all of the main display elements over to the attached monitor? I wanted to shut the LCD panel off on the laptop and hook it up like a desktop. Relevant specs: Ubuntu 10.10 x64 Intel graphics chipset The attached monitor is currently set as the default monitor. Any suggestions are welcome. :)

  Read the article

• ERROR while getting interface

  - by user284391

  I have installed the latest version of aircrack-ng, but when i run this code, sudo airmon-ng start wlan0 I get this. sudo airmon-ng start wlan0 Found 4 processes that could cause trouble. If airodump-ng, aireplay-ng or airtun-ng stops working after a short period of time, you may want to kill (some of) them! -e PID Name 463 avahi-daemon 475 avahi-daemon 683 NetworkManager 756 wpa_supplicant Interface Chipset Driver wlan0 Broadcom wl - [phy0]mon0: ERROR while getting interface flags: No such device (monitor mode enabled on mon0) Is there anyone who could help me get this problem solved please.

  Read the article

• Ubuntu hangs at the '_' prompt for 15' when booting. Do I need another driver for my Intel G31/G33 integrated graphics?

  - by Doctoa

  I have an ASROCK which uses Intel G31 graphics. Ubuntu says my graphics chipset is G33. Should I look for another driver or are they from the same family? I am also having problems booting and that purple screen stuck so for this I asked this question. I have partially fixed the purple screen stuck by enabling (uncommenting) this line in grub: GRUB_TERMINAL=console But Ubuntu still hangs at start up for about 15 minutes with a black screen and only the '_' prompt. Here is a link for an overview of my ASROCK G31M-S

  Read the article

• Problem installing libva (VAAPI), vainfo fails

  - by satuon

  I'm following a wiki on how to make VLC use the GPU in the Core i3 integrated graphics chipset, but I'm stuck at one of the first steps, installing VAAPI. I installed libva1 and vainfo by using "sudo apt-get install libva1 vainfo", but when I run vainfo it says libva: libva version 0.32.0 libva: va_getDriverName() returns 0 libva: Trying to open /usr/lib/dri/i965_drv_video.so libva: va_openDriver() returns -1 vaInitialize failed with error code -1 (unknown libva error),exit It should say VAProfileH264High : VAEntrypointVLD VAProfileVC1Advanced : VAEntrypointVLD according to the wiki. /usr/lib/dri/i965_drv_video.so doesn't exist in my system, but I installed libva1 with apt-get.

  Read the article

• 3TB non-boot hard disk on older motherboard

  - by Bcos

  It is time to expand the capacity of my Ubuntu home file server so I would like to purchase some 3TB hard disks. However, I am concerned with potential compatibility issues. I've tried searching around but I haven't found information which clearly addresses my particular situation. My server is running Ubuntu 10.04 on an Intel P35 chipset based system. The motherboard does not support UEFI (and, by extension, GPT?). However, Ubuntu does support 2TB disks. Will I be able to properly utilize these new disks, or does the motherboard limitation trump all else? The boot disk is <2TB and will not be updated nor am I dual-booting; these disks will be used strictly as slaves in a pure Ubuntu environment. I'd hate to pull the trigger on these new disks just to be unpleasantly surprised, so any feedback is appreciated. Thanks!

  Read the article

• Problem with the screen resolution on Ubuntu 12.04

  - by sveinn

  I just installed ubuntu on my laptop. The screen resolution is stuck in 1024x768. The screen is made for 1280x800. When I run xrandr I get: xrandr: Failed to get size of gamma for output default Screen 0: minimum 800 x 600, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 61.0* 800x600 61.0 1280x800 isn't offered and I get gamma size error. I was going to look into the Xorg.conf file but I couldn't locate it. 1280x800 was displayed in Windows 7 and I think it is being displayed in Grub before ubuntu starts also. Here are some details about my computer: CPU Intel atom D2500 1.86GHz Chipset Intel 945GSE+ICH7M LCD 14" TFT 16:9 Resolution ratio 1280*800 Video Card Intel integrated GMA950 Does anyone know how to fix this?

  Read the article

• Dual monitor not working after an update

  - by Nimonika

  I did a package manager update yesterday and it turns out that my dual monitor setup has stopped working. I have poor vision so I really need to connect to a much bigger screen, but since yesterday, when I connect the screen to my laptop, the screen does not automatically reset itself to the laptop display. Even after lots of trial and error with the display settings, I am getting different dispalys on the laptop and external screen and right now only the big screen is active while the laptop has blanked out. Please can someone help me setup my dual screens for 11.10 properly. lspci -v | grep -i vga output 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller]

  Read the article

• 12.04 + Alienware M11x R2 + Bumblebee 3.0 = low resolution only

  - by user89171

  I had a fresh install of Ubuntu 12.04 on my Alienware M11x, and it worked with the native monitor resolution of 1366x768. In trying to get the Optimus chipset working, I installed Bumblebee 3.0. Now, I am only offered 640x480 for my monitor resolution. Graphically, Unity 3D appears to be working now, instead of the Unity 2D I had before, so something went right, but I don't know how I can get it to offer me any higher resolutions than 640x480. I've looked up many pages that address this topic, but nothing that I've seen suggested has worked. sudo add-apt-repository ppa:bumblebee/stable sudo apt-get update sudo apt-get install bumblebee-nvidia was the latest thing I tried. I've tried some variants of this, I've been sure to uninstall nvidia drivers prior to reinstalling Bumblebee and various video drivers. Does anyone have any clue as to how I can get back to native resolution?

  Read the article

• Ubuntu 12.04 on Bangho

  - by reyquito

  This question is (mostly) for people in Argentina. ¿Have anyone tried installing Ubuntu 12.04 on a Bangho notebook (with i3-560 processor)? I haven't found any experiences online with this brand. The specs of the sistem are below (in spanish): Procesador Intel Corei3 Serie 2300 Memoria 4Gb. DDR3. - Disco Rígido SATA 500Gb. Chipset Intel HM65 Video Intel HM65 configurable hasta 1748MB Placa de red 10/100/1000, Wireless 802.11b/g/n Bluetooth Pantalla 15.6" HD (1366 x 768) - Peso 2,3Kg. Best regards, Q

  Read the article

• Dual monitor with different resolutions problem

  - by Mackemint

  I'm on an LG R405 with a PM965 chipset and a NVIDIA GeForce Go 8400M GS gaphics card. I'm trying to use an external monitor (Benq senseye3 G2222HDL) through a VGA out port. All was fine when installing except for the screen layouts were flip-flopped (computer defalut setup so external monitor was to the right instead of left). When I moved the secondary monitor to its real position in the setup, I started getting strange problems. I loose representation of large portions of the screen, on both screens, and have to reboot. If I plug the monitor in after rebooting I get more problems than when booting up with the monitor already plugged in, but in both cases I can barely see what I'm doing. Please advice! Regards /M

  Read the article

• USB mouse freezes

  - by Zabba

  A simple Microsoft Optical mouse 1000 (USB) that runs perfectly on Windows, freezes up under Ubuntu 10.x and Fedora 1x after about 10 minutes of using the OS.Rebooting, the same problem comes up again in a few minutes. Interestingly, the problem does not occur when Ubuntu is installed in Oracle VirtualBox VM. Installing Ubuntu "as usual" (i.e. not in a VM), causes the problem to occur. Has any one here faced the same problem or have a solution for it? Maybe using a different mouse that is known to work with Ubuntu 10.x? If it helps my system is: Asus P5NSLI motherboard (nVidia nForce 570 chipset), 4 GB RAM Ubuntu 10.10 refers to "32 bit" version of Ubuntu It seems that Ubuntu has a lot of all types of freeze issues. Can someone recommend a version of Ubuntu that is fairly recent and stable ? I intend to use Ubuntu for Ruby on Rails development.

  Read the article

• Fix grub2 after installing ubuntu 12.04

  - by user80039

  I've installed ubuntu 12.04, but after rebooting I get the message: GRUB loading: Welcome to GRUB! error: file '/grub/i386-pc/normal.mod' not found Entering rescue mode... grub rescue> I have the following partitons setup: /dev/sda6: /boot ext2 /dev/sda9: / ext4 /dev/sda8: swap /dev/sda7: /home ext4 I guess that some of the prefixes for GRUB are wrong due to the /boot partition? Or there might be a problem with EFI? The hardware is a 1015bx asus netbook with c-60 amd fusion chipset. How can I fix this GRUB problem from the rescue prompt?

  Read the article

• Why Ubuntu always force itself to be in 1440x900 resolution?

  - by rainlover

  My screen's resolution is 1024x768 and when I installed Ubuntu it was forcefully in 1440x900. I changed it in my account and again I've to change it in another standard account. I don't know any way to change it in login screen. Also when shutting down that black screen with some commands also appears in 1440x900. I don't know why Ubuntu force itself to be in 1440x900. I want 1024x768 in whole way. I don't know whether it is required but I have Intel chipset 128 MB.

  Read the article

• Remove newlines and spaces

  - by Cosmin

  How can I remove newline between <table> .... </table> and add \n after each ex: <table border="0" cellspacing="0" cellpadding="0" width="450" class="descriptiontable"><tr> <td width="50%" valign="top"> <span class="displayb">Model Procesor:</span> Intel Celeron<br><span class="displayb">Frecventa procesor (MHz):</span> 2660<br><span class="displayb">Placa Video:</span> Intel Extreme Graphics 2<br><span class="displayb">Retea integrata:</span> 10/100Mbps, RJ-45<br><span class="displayb">Chipset:</span> Intel 845G<br> </td> <td width="50%" valign="top"> <span class="displayb">Capacitate RAM (MB):</span> 512<br><span class="displayb">Tip RAM:</span> DDR<br> </td> </tr></table> and become : <table border="0" cellspacing="0" cellpadding="0" width="450" class="descriptiontable"><tr><td width="50%" valign="top"><span class="displayb">Model Procesor:</span> Intel Celeron<br><span class="displayb">Frecventa procesor (MHz):</span> 2660<br><span class="displayb">Placa Video:</span> Intel Extreme Graphics 2<br><span class="displayb">Retea integrata:</span> 10/100Mbps, RJ-45<br><span class="displayb">Chipset:</span> Intel 845G<br></td><td width="50%" valign="top"><span class="displayb">Capacitate RAM (MB):</span> 512<br><span class="displayb">Tip RAM:</span> DDR<br></td></tr></table>\n s.

  Read the article

• xrandr shows two displays (LVDS1), but how can I use VGA1 only?

  - by Tom Fishman

  We're running Ubuntu 11 on this hardware: Foxconn R20-D2 Intel Atom D510 Intel NM10 Intel GMA 3150 Barebone There is no integrated display (it is a barebone box). I connected an external VGA to it. However xrandr shows two displays: Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0*+ 800x600 60.3 56.2 640x480 59.9 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 519mm x 324mm 1920x1200 60.0 + 1600x1200 60.0 1680x1050 60.0 1280x1024 76.0 75.0 72.0 60.0 1440x900 75.0 59.9 1152x864 75.0 1024x768 75.1 70.1 60.0* 832x624 74.6 800x600 72.2 75.0 60.3 640x480 72.8 75.0 66.7 60.0 720x400 70.1 But I don't have two displays. How can I get rid of LVDS1 and use only VGA1? The direct result is that I'm seeing a 1024x768 resolution on my VGA display, because the OS is using "mirror" mode which uses the lower resolution of the two. Turning off the mirror is not a solution. I want to fix it. Related logs: ... [ 20.019] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 20.019] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 20.019] (==) intel(0): RGB weight 888 [ 20.019] (==) intel(0): Default visual is TrueColor [ 20.019] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview G [ 20.019] (--) intel(0): Chipset: "Pineview G" [ 20.019] (**) intel(0): Relaxed fencing enabled [ 20.019] (**) intel(0): Wait on SwapBuffers? enabled [ 20.019] (**) intel(0): Triple buffering? enabled [ 20.019] (**) intel(0): Framebuffer tiled [ 20.019] (**) intel(0): Pixmaps tiled [ 20.020] (**) intel(0): 3D buffers tiled [ 20.020] (**) intel(0): SwapBuffers wait enabled [ 20.020] (==) intel(0): video overlay key set to 0x101fe [ 20.020] (II) intel(0): Output LVDS1 has no monitor section [ 20.020] (II) intel(0): found backlight control interface /sys/class/backlight/intel_backlight [ 20.080] (II) intel(0): Output VGA1 has no monitor section [ 20.080] (II) intel(0): EDID for output LVDS1 [ 20.081] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 20.081] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 20.081] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 20.081] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) ... [ 20.082] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 20.082] (II) intel(0): Printing probed modes for output LVDS1 [ 20.082] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 20.082] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 20.082] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 20.082] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 20.149] (II) intel(0): EDID for output VGA1 [ 20.149] (II) intel(0): Manufacturer: BNQ Model: 771b Serial#: 6595 [ 20.149] (II) intel(0): Year: 2008 Week: 16 [ 20.149] (II) intel(0): EDID Version: 1.3 [ 20.149] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V ... [ 20.152] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 20.152] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 20.152] (II) intel(0): Output LVDS1 connected [ 20.152] (II) intel(0): Output VGA1 connected [ 20.152] (II) intel(0): Using exact sizes for initial modes [ 20.152] (II) intel(0): Output LVDS1 using initial mode 1024x768 [ 20.152] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 20.152] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. ...

  Read the article

• Add a small RAID card? Will it help overall stability and performance of my nine hard drives?

  - by Ray

  Hi, Will I get any extra genuine added performance and RAID stability if I insert a basic RAID card into a PCI-E x1 slot? I am considering the Adaptec 1220SA - 2 port SATA , pci-express (1x) , raid 0/1. Ok it only supports two SATA drives. Purpose is to help support the eight internal hard drives (1TB each), a DVD drive and an external e-SATA connected 2TB hard drive - by dealing with two of the internal hard drives. My current configuration of eight internal 1TB Barracuda (7200.12) SATA hard drives, one external 2TB SATA Western Digital Green Drive (e-SATA) and one DVD drive can already be supported by the Intel P55 & JMicron controllers on the ASUS motherboard : the Intel P55 (controls six HDD; configured as three x RAID 1), and the JMicron (controls two HDD as one RAID 1, as well as the DVD drive and the external SATA drive via the motherboard's e-SATA port (controlled by the JMicron)). Bigger picture details : I have an ASUS motherboard designed for the LGA1156 type processor and it includes the Intel P55 Express Chipset and JMicron. I am using the Intel Core i7-870 processor, and have 8GB DDR3 (1333) memory (four x 2GB Corsair DIMMs). Enough overall power. The power supply is more than sufficicient for the system. Corsair AX850. The system will never need the full 850 watts (future : second graphics card). The RAID card would provide hardware RAID 1 for two of the eight intrnal drives. It would either reduce the load on : the Intel P55 firmware RAID support, or replace the JMicron controller's RAID 1 set. I am busy installing the above configuration using Windows 7 Ultimate 64-bit as the OS. The RAID card is a last minute addition to the plan. Is it worth spending the extra R700 - R900 on the Adaptec 1220SA, or equivalent RAID card? I cannot afford to spend yet another R2000 - R3000 on a RAID card that would support many SATA2 hard drives, with a better RAID, example the RAID 5. My Issue & assumption : I am trusting that the Intel P55 chipset can properly handle six drives, configured as three * RAID 1. I am assuming that the JMicron can handle, using its RED SATA ports, one RAID-1 (two HDDs). The DVD drive connects to the JMicron optical SATA port 1 (white port 1). White port 2 is not used. The e-SATA connection is from the JMicron straight to, and through the motherboard - to an on-board (rear panel) e-SATA port. Am I being a little hopeful in only using the on-board Intel P55 and the JMicron? Is it a waste of money to install a RAID card that handles two SATA2 drives? OR Is it wisdom to take the pressure a little off the Intel P55? Obviously I am interested in data security, hence RAID 1, not RAID Zero. RAID 5 would be nice. The CPU, Intel Core i7-870 will provide the clout. Context to nine drives : I am using virtualisation with Windows 7 Ultimate. Bootable VMs. The operating system gets a mirror. Loaded apps gets a mirror. The current design data is kept in another mirror and Another mirror is back-up one and / or VM territory. Then the external 2TB drive (via e-SATA) is the next layer of data security and then finally, I use off-site data security. Thanks.

  Read the article

• BSOD Code 16, artifacts all over the place (gtx 260)

  - by belinea

  I have a following, quite dated rig E8400 Core 2 Duo cpu Intel Dragontail Peak DP35DP motherboard on Intel Bearlake P35 chipset 4GB ram Geforce 260gtx Corsair 650W PSU Windows 7 64 bit The following things has happened in the last few days. I first decided to update my Nvidia drivers to the latest version. That was 4 days ago. PC worked fine for 2 days and I was able to play few games as well without any problems. Then 2 days ago a first crash happened while playing the new XCOM game. BSOD code 16. Just the blue screen, no artifacts. PC rebooted and worked well again, I continued playing this game for another 2 hours and went to sleep. Next evening I tried to play some BF3 multiplayer (use to play on LOW settings). Approx. 10 minutes into the game red/pink-ish artifacts appeared on the screen and game quit to desktop. Restarted the game and another 3-4 minutes afterwards another crash to desktop but this time followed shortly by BSOD Code 16. From that moment I started to seeing artifacts on random startups, including Windows loading screen and the BIOS itself. Windows would still load but soon enough it would BSOD on a simple task like opening a Internet browser. Today I get tons of artifacts (little small red dashes all over the screen) on BIOS, loading screen, normal Windows mode as well as safe mode. I suspect it wouldn't be drivers but I tried removing and sweeping them entirely in the safe mode. PC would still start with artifacts all over the place but would load the normal mode, just without the driver, in the default lowest resolution. As soon as proper Nvidia drivers are installed though and PC rebooted, Windows doesn't load at all as BSOD now appears on loading screen. However, again, if I go to safe mode and remove drivers, normal mode launches fine. So obviously crash happens only on high resolution. I opened my machine this morning and gave it a proper cleaning even though it wasn't heavily dusted. It didn't help and number of artifacts seems to increase with every PC restart. I write these words in safe mode, which works, but I have to look through all the red dots and dashes. I don't have built in GPU chipset so I can't try removing my Geforce card nor can I borrow A GPU from anyone else. What are my options? I was looking into getting a completely new rig around Christmas so I'm not freaking out about this. If everything points to hardware issue I may simply decide to get the new machine earlier and don't bother with fixing this one. However it would be great to learn more if this is indeed situation that has slim chances of getting sorted. I realize BSOD Code 16 is rather popular topic online but every story seems a bit different and there can be number of issues with it. Hence a new thread.

  Read the article

• Does this laptop have high enough specifications for gaming? [closed]

  - by Grant

  Here's the laptop It wouldn't be hardcore gaming, mostly things like the new Deus Ex game, Mirror's Edge, Portal 2, etc... I need to replace my current, broken, laptop and I thought this would be a good opportunity to get to play some of these games. My current laptop is really only lacking in its graphics card. (Intel series 4 chipset) If this laptop isn't good enough, I would really appreciate suggestions. I won't be able to get a desktop, otherwise I would, and I can't spend more than $1000 dollars on my new laptop.

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >